d/freebsd-dev
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
2fe3761e69
freebsd-dev/sys/dev/ath/ath_hal/ar5416/ar5416.h

363 lines
15 KiB
C
Raw Normal View History

virgin import of ath hal
2008-11-28 00:03:41 +00:00
/*
Overhaul regulatory support: o remove HAL_CHANNEL; convert the hal to use net80211 channels; this mostly involves mechanical changes to variable names and channel attribute macros o gut HAL_CHANNEL_PRIVATE as most of the contents are now redundant with the net80211 channel available o change api for ath_hal_init_channels: no more reglass id's, no more outdoor indication (was a noop), anM contents o add ath_hal_getchannels to have the hal construct a channel list without altering runtime state; this is used to retrieve the calibration list for the device in ath_getradiocaps o add ath_hal_set_channels to take a channel list and regulatory data from above and construct internal state to match (maps frequencies for 900MHz cards, setup for CTL lookups, etc) o compact the private channel table: we keep one private channel per frequency instead of one per HAL_CHANNEL; this gives a big space savings and potentially improves ani and calibration by sharing state (to be seen; didn't see anything in testing); a new config option AH_MAXCHAN controls the table size (default to 96 which was chosen to be ~3x the largest expected size) o shrink ani state and change to mirror private channel table (one entry per frequency indexed by ic_devdata) o move ani state flags to private channel state o remove country codes; use net80211 definitions instead o remove GSM regulatory support; it's no longer needed now that we pass in channel lists from above o consolidate ADHOC_NO_11A attribute with DISALLOW_ADHOC_11A o simplify initial channel list construction based on the EEPROM contents; we preserve country code support for now but may want to just fallback to a WWR sku and dispatch the discovered country code up to user space so the channel list can be constructed using the master regdomain tables o defer to net80211 for max antenna gain o eliminate sorting of internal channel table; now that we use ic_devdata as an index, table lookups are O(1) o remove internal copy of the country code; the public one is sufficient o remove AH_SUPPORT_11D conditional compilation; we always support 11d o remove ath_hal_ispublicsafetysku; not needed any more o remove ath_hal_isgsmsku; no more GSM stuff o move Conformance Test Limit (CTL) state from private channel to a lookup using per-band pointers cached in the private state block o remove regulatory class id support; was unused and belongs in net80211 o fix channel list construction to set IEEE80211_CHAN_NOADHOC, IEEE80211_CHAN_NOHOSTAP, and IEEE80211_CHAN_4MSXMIT o remove private channel flags CHANNEL_DFS and CHANNEL_4MS_LIMIT; these are now set in the constructed net80211 channel o store CHANNEL_NFCREQUIRED (Noise Floor Required) channel attribute in one of the driver-private flag bits of the net80211 channel o move 900MHz frequency mapping into the hal; the mapped frequency is stored in the private channel and used throughout the hal (no more mapping in the driver and/or net80211) o remove ath_hal_mhz2ieee; it's no longer needed as net80211 does the calculation and available in the net80211 channel o change noise floor calibration logic to work with compacted private channel table setup; this may require revisiting as we no longer can distinguish channel attributes (e.g. 11b vs 11g vs turbo) but since the data is used only to calculate status data we can live with it for now o change ah_getChipPowerLimits internal method to operate on a single channel instead of all channels in the private channel table o add ath_hal_gethwchannel to map a net80211 channel to a h/w frequency (always the same except for 900MHz channels) o add HAL_EEBADREG and HAL_EEBADCC status codes to better identify regulatory problems o remove CTRY_DEBUG and CTRY_DEFAULT enum's; these come from net80211 now o change ath_hal_getwirelessmodes to really return wireless modes supported by the hardware (was previously applying regulatory constraints) o return channel interference status with IEEE80211_CHANSTATE_CWINT (should change to a callback so hal api's can take const pointers) o remove some #define's no longer needed with the inclusion of <net80211/_ieee80211.h> Sponsored by: Carlson Wireless
2009-01-28 18:00:22 +00:00
* Copyright (c) 2002-2009 Sam Leffler, Errno Consulting
virgin import of ath hal
2008-11-28 00:03:41 +00:00
* Copyright (c) 2002-2008 Atheros Communications, Inc.
*
* Permission to use, copy, modify, and/or distribute this software for any
* purpose with or without fee is hereby granted, provided that the above
* copyright notice and this permission notice appear in all copies.
*
* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
* WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
* ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
* WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
* ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
*
Overhaul regulatory support: o remove HAL_CHANNEL; convert the hal to use net80211 channels; this mostly involves mechanical changes to variable names and channel attribute macros o gut HAL_CHANNEL_PRIVATE as most of the contents are now redundant with the net80211 channel available o change api for ath_hal_init_channels: no more reglass id's, no more outdoor indication (was a noop), anM contents o add ath_hal_getchannels to have the hal construct a channel list without altering runtime state; this is used to retrieve the calibration list for the device in ath_getradiocaps o add ath_hal_set_channels to take a channel list and regulatory data from above and construct internal state to match (maps frequencies for 900MHz cards, setup for CTL lookups, etc) o compact the private channel table: we keep one private channel per frequency instead of one per HAL_CHANNEL; this gives a big space savings and potentially improves ani and calibration by sharing state (to be seen; didn't see anything in testing); a new config option AH_MAXCHAN controls the table size (default to 96 which was chosen to be ~3x the largest expected size) o shrink ani state and change to mirror private channel table (one entry per frequency indexed by ic_devdata) o move ani state flags to private channel state o remove country codes; use net80211 definitions instead o remove GSM regulatory support; it's no longer needed now that we pass in channel lists from above o consolidate ADHOC_NO_11A attribute with DISALLOW_ADHOC_11A o simplify initial channel list construction based on the EEPROM contents; we preserve country code support for now but may want to just fallback to a WWR sku and dispatch the discovered country code up to user space so the channel list can be constructed using the master regdomain tables o defer to net80211 for max antenna gain o eliminate sorting of internal channel table; now that we use ic_devdata as an index, table lookups are O(1) o remove internal copy of the country code; the public one is sufficient o remove AH_SUPPORT_11D conditional compilation; we always support 11d o remove ath_hal_ispublicsafetysku; not needed any more o remove ath_hal_isgsmsku; no more GSM stuff o move Conformance Test Limit (CTL) state from private channel to a lookup using per-band pointers cached in the private state block o remove regulatory class id support; was unused and belongs in net80211 o fix channel list construction to set IEEE80211_CHAN_NOADHOC, IEEE80211_CHAN_NOHOSTAP, and IEEE80211_CHAN_4MSXMIT o remove private channel flags CHANNEL_DFS and CHANNEL_4MS_LIMIT; these are now set in the constructed net80211 channel o store CHANNEL_NFCREQUIRED (Noise Floor Required) channel attribute in one of the driver-private flag bits of the net80211 channel o move 900MHz frequency mapping into the hal; the mapped frequency is stored in the private channel and used throughout the hal (no more mapping in the driver and/or net80211) o remove ath_hal_mhz2ieee; it's no longer needed as net80211 does the calculation and available in the net80211 channel o change noise floor calibration logic to work with compacted private channel table setup; this may require revisiting as we no longer can distinguish channel attributes (e.g. 11b vs 11g vs turbo) but since the data is used only to calculate status data we can live with it for now o change ah_getChipPowerLimits internal method to operate on a single channel instead of all channels in the private channel table o add ath_hal_gethwchannel to map a net80211 channel to a h/w frequency (always the same except for 900MHz channels) o add HAL_EEBADREG and HAL_EEBADCC status codes to better identify regulatory problems o remove CTRY_DEBUG and CTRY_DEFAULT enum's; these come from net80211 now o change ath_hal_getwirelessmodes to really return wireless modes supported by the hardware (was previously applying regulatory constraints) o return channel interference status with IEEE80211_CHANSTATE_CWINT (should change to a callback so hal api's can take const pointers) o remove some #define's no longer needed with the inclusion of <net80211/_ieee80211.h> Sponsored by: Carlson Wireless
2009-01-28 18:00:22 +00:00
* $FreeBSD$
virgin import of ath hal
2008-11-28 00:03:41 +00:00
*/
#ifndef _ATH_AR5416_H_
#define _ATH_AR5416_H_
#include "ar5212/ar5212.h"
Update to later code from my repository: o many bug fixes o add new periodic calibration api o break up 5416 periodic calibration code in preparation for 928x o move get noise floor to rf backends o 5416-specific ani (still disabled) o modularize 5210 eeprom format a la other eeprom formats o start cleaning up regdomain code o prepare for proper 1/2 and 1/4 width channel support o bring back 900MHz card support o clean up 5212 rf version handling o add 1/2 and 1/4 width channel support for 5212 parts o split 5212 rfgain handling out o improve ani debugging o add AH_USE_INIPDGAIN compile option o purge a bunch of dead 5212 state o add 1/2 and 1/4 rate modes o remove HAL_CAP_CHAN_HALFRATE and HAL_CAP_CHAN_QUARTERRATE; the same info can now be deduced from the set of supported modes
2008-11-28 00:48:05 +00:00
#include "ar5416_cal.h"
Bring back AR9285 support. This fixes most of the issues and should be pretty usable. MFC after: 1 month
2010-02-15 17:49:49 +00:00
#include "ah_eeprom_v14.h" /* for CAL_TARGET_POWER_* */
virgin import of ath hal
2008-11-28 00:03:41 +00:00
#define AR5416_MAGIC 0x20065416
enum {
Update to later code from my repository: o many bug fixes o add new periodic calibration api o break up 5416 periodic calibration code in preparation for 928x o move get noise floor to rf backends o 5416-specific ani (still disabled) o modularize 5210 eeprom format a la other eeprom formats o start cleaning up regdomain code o prepare for proper 1/2 and 1/4 width channel support o bring back 900MHz card support o clean up 5212 rf version handling o add 1/2 and 1/4 width channel support for 5212 parts o split 5212 rfgain handling out o improve ani debugging o add AH_USE_INIPDGAIN compile option o purge a bunch of dead 5212 state o add 1/2 and 1/4 rate modes o remove HAL_CAP_CHAN_HALFRATE and HAL_CAP_CHAN_QUARTERRATE; the same info can now be deduced from the set of supported modes
2008-11-28 00:48:05 +00:00
HAL_RESET_POWER_ON,
HAL_RESET_WARM,
HAL_RESET_COLD,
virgin import of ath hal
2008-11-28 00:03:41 +00:00
};
typedef struct {
uint16_t synth_center;
uint16_t ctl_center;
uint16_t ext_center;
} CHAN_CENTERS;
De-dup the ar5416 rates array definition.
2011-04-11 11:15:34 +00:00
typedef enum Ar5416_Rates {
rate6mb, rate9mb, rate12mb, rate18mb,
rate24mb, rate36mb, rate48mb, rate54mb,
rate1l, rate2l, rate2s, rate5_5l,
rate5_5s, rate11l, rate11s, rateXr,
rateHt20_0, rateHt20_1, rateHt20_2, rateHt20_3,
rateHt20_4, rateHt20_5, rateHt20_6, rateHt20_7,
rateHt40_0, rateHt40_1, rateHt40_2, rateHt40_3,
rateHt40_4, rateHt40_5, rateHt40_6, rateHt40_7,
rateDupCck, rateDupOfdm, rateExtCck, rateExtOfdm,
Ar5416RateSize
} AR5416_RATES;
virgin import of ath hal
2008-11-28 00:03:41 +00:00
#define AR5416_DEFAULT_RXCHAINMASK 7
#define AR5416_DEFAULT_TXCHAINMASK 1
#define AR5416_MAX_RATE_POWER 63
#define AR5416_KEYTABLE_SIZE 128
#define AR5416_CCA_MAX_GOOD_VALUE -85
#define AR5416_CCA_MAX_HIGH_VALUE -62
#define AR5416_CCA_MIN_BAD_VALUE -140
Add support for the AR9285 chipset, which is found on many netbooks available today. This card is a low power 802.11bgn that only does 11n rates up to MCS 7 (that's 65 Mbps in 20Mhz mode and 135 in 40Mhz mode). 802.11n is not yet supported, but will be in the future. The driver still has a problem regarding to the setting of txpower on the card, so don't expect good performance yet. After fixing this problem, an MFC is possible. Special thanks to iXsystems and S Smirnov <tonve at yandex.ru> for help with the purchase of a netbook with this card. Sponsored by: iXsystems, Inc.
2010-01-29 10:10:14 +00:00
#define AR9285_CCA_MAX_GOOD_VALUE -118
virgin import of ath hal
2008-11-28 00:03:41 +00:00
preliminary ar9280 support: o add 9280 attach that sets up ini, cal, etc. o new rf backend for 9280 and later parts o split ini setup and spur mitigation support out to methods and provide 9280-specific support o minor fixups to shared code to handle 9280-specific work Obtained from: Atheros (ini values and some code)
2009-03-12 18:18:28 +00:00
#define AR5416_SPUR_RSSI_THRESH 40
Bring over some NF calibration changes from ath9k. Each different radio chipset has a different "good" range of CCA (clear channel access) parameters where, if you write something out of range, it's possible the radio will go deaf. Also, since apparently occasionally reading the NF calibration returns "wrong" values, so enforce those limits on what is being written into the CCA register. Write a default value if there's no history available. This isn't the case right now but it may be later on when "off-channel" scanning occurs without init'ing or changing the NF history buffer. (As each channel may have a different noise floor; so scanning or other off-channel activity shouldn't affect the NF history of the current channel.)
2011-01-29 14:27:20 +00:00
struct ar5416NfLimits {
int16_t max;
int16_t min;
int16_t nominal;
};
virgin import of ath hal
2008-11-28 00:03:41 +00:00
struct ath_hal_5416 {
struct ath_hal_5212 ah_5212;
/* NB: RF data setup at attach */
HAL_INI_ARRAY ah_ini_bb_rfgain;
HAL_INI_ARRAY ah_ini_bank0;
HAL_INI_ARRAY ah_ini_bank1;
HAL_INI_ARRAY ah_ini_bank2;
HAL_INI_ARRAY ah_ini_bank3;
HAL_INI_ARRAY ah_ini_bank6;
HAL_INI_ARRAY ah_ini_bank7;
HAL_INI_ARRAY ah_ini_addac;
Add PCIE power control api: o add ah_configPCIE and ah_disablePCIE for drivers to configure PCIE power save operation (modeled after ath9k, may need changes) o add private state flag to indicate if device is PCIE (replaces private hack in 5212 code) o add serdes programming ini bits for 5416 and later parts and setup for each part (5416 and 9160 logic hand-crafted from existing routines); 5212 remains open-coded but is now hooked in via ah_configPCIE o add PCIE workaround gunk o add ar5416AttachPCIE for iodomatic code used by 5416 and later parts
2009-02-24 01:07:06 +00:00
HAL_INI_ARRAY ah_ini_pcieserdes;
virgin import of ath hal
2008-11-28 00:03:41 +00:00
preliminary ar9280 support: o add 9280 attach that sets up ini, cal, etc. o new rf backend for 9280 and later parts o split ini setup and spur mitigation support out to methods and provide 9280-specific support o minor fixups to shared code to handle 9280-specific work Obtained from: Atheros (ini values and some code)
2009-03-12 18:18:28 +00:00
void (*ah_writeIni)(struct ath_hal *,
const struct ieee80211_channel *);
void (*ah_spurMitigate)(struct ath_hal *,
const struct ieee80211_channel *);
Introduce methods for the initial calibration and the new PA calibration routines. These are needed for the AR9285/AR2427 and AR9287 calibration routines which will be introducecd in a later commit.
2011-03-11 11:35:36 +00:00
/* calibration ops */
HAL_BOOL (*ah_cal_initcal)(struct ath_hal *,
const struct ieee80211_channel *);
void (*ah_cal_pacal)(struct ath_hal *,
HAL_BOOL is_reset);
Implement open-loop TX power control (OLC) for Merlin (AR9280) and generally tidy up the TX power programming code. Enforce that the TX power offset for Merlin is -5 dBm, rather than any other value programmable in the EEPROM. This requires some further code to be ported over from ath9k, so until that is done and tested, fail to attach NICs whose TX power offset isn't -5 dBm. This improves both legacy and HT transmission on my merlin board. It allows for stable MCS TX up to MCS15. Specifics: * Refactor out a bunch of the TX power calibration code - setting/obtaining the power detector / gain boundaries, programming the PDADC * Take the -5 dBm TX power offset into account on Merlin - "0" in the per-rate TX power register means -5 dBm, not 0 dBm * When doing OLC * Enforce min (0) and max (AR5416_MAX_RATE_POWER) when fiddling with the TX power, to avoid the TX power values from wrapping when low. * Implement the 1 dBm cck power offset when doing OLC * Implement temperature compensation for 2.4ghz mode when doing OLC * Implement an AR9280 specific TX power calibration routine which includes the OLC twiddles, leaving the earlier chipset path (AR5416, AR9160) alone Whilst here, use these refactored routines for the AR9285 TX power calibration/programming code and enforce correct overflow/underflow handling when fiddling with TX power values. Obtained from: linux ath9k
2011-03-08 06:59:59 +00:00
/* optional open-loop tx power control related methods */
void (*ah_olcInit)(struct ath_hal *);
void (*ah_olcTempCompensation)(struct ath_hal *);
/* tx power control */
HAL_BOOL (*ah_setPowerCalTable) (struct ath_hal *ah,
struct ar5416eeprom *pEepData,
const struct ieee80211_channel *chan,
int16_t *pTxPowerIndexOffset);
Break out the PLL setup into an overridable method. The only method right now is ar5416InitPLL() which handles multiple chipsets; this can now be overridden by newer chipset HAL code.
2011-04-24 15:53:57 +00:00
/* baseband operations */
void (*ah_initPLL) (struct ath_hal *ah,
const struct ieee80211_channel *chan);
virgin import of ath hal
2008-11-28 00:03:41 +00:00
u_int ah_globaltxtimeout; /* global tx timeout */
Fill in gpio support for 5416 and later parts: o add output mux support o gpio pin count is chip-dependent o 9280 and 9285 do input handling different o hookup gpio interrupts o no need to save/restore soft led state around reset
2009-02-24 00:33:08 +00:00
u_int ah_gpioMask;
virgin import of ath hal
2008-11-28 00:03:41 +00:00
int ah_hangs; /* h/w hangs state */
uint8_t ah_keytype[AR5416_KEYTABLE_SIZE];
/*
Port over a new routine which grabs the percentage of time spent in TX frame, RX frame, RX clear, RX extension clear. This is useful for estimating channel business. The same routines should be written for AR5210->AR5212 where appopriate. Obtained from: Atheros
2011-11-09 05:25:30 +00:00
* Primary/Extension Channel Tx, Rx, Rx Clear State
virgin import of ath hal
2008-11-28 00:03:41 +00:00
*/
uint32_t ah_cycleCount;
uint32_t ah_ctlBusy;
uint32_t ah_extBusy;
Port over a new routine which grabs the percentage of time spent in TX frame, RX frame, RX clear, RX extension clear. This is useful for estimating channel business. The same routines should be written for AR5210->AR5212 where appopriate. Obtained from: Atheros
2011-11-09 05:25:30 +00:00
uint32_t ah_rxBusy;
uint32_t ah_txBusy;
virgin import of ath hal
2008-11-28 00:03:41 +00:00
uint32_t ah_rx_chainmask;
uint32_t ah_tx_chainmask;
Update to later code from my repository: o many bug fixes o add new periodic calibration api o break up 5416 periodic calibration code in preparation for 928x o move get noise floor to rf backends o 5416-specific ani (still disabled) o modularize 5210 eeprom format a la other eeprom formats o start cleaning up regdomain code o prepare for proper 1/2 and 1/4 width channel support o bring back 900MHz card support o clean up 5212 rf version handling o add 1/2 and 1/4 width channel support for 5212 parts o split 5212 rfgain handling out o improve ani debugging o add AH_USE_INIPDGAIN compile option o purge a bunch of dead 5212 state o add 1/2 and 1/4 rate modes o remove HAL_CAP_CHAN_HALFRATE and HAL_CAP_CHAN_QUARTERRATE; the same info can now be deduced from the set of supported modes
2008-11-28 00:48:05 +00:00
Add a new parameter to selectively enable/disable the ANI operations. This was inspired by ath9k, which disables ANI anti-noise immunity parameter tweaking (but leaves the rest of the ANI operations alone.)
2011-02-17 05:52:53 +00:00
HAL_ANI_CMD ah_ani_function;
Update to later code from my repository: o many bug fixes o add new periodic calibration api o break up 5416 periodic calibration code in preparation for 928x o move get noise floor to rf backends o 5416-specific ani (still disabled) o modularize 5210 eeprom format a la other eeprom formats o start cleaning up regdomain code o prepare for proper 1/2 and 1/4 width channel support o bring back 900MHz card support o clean up 5212 rf version handling o add 1/2 and 1/4 width channel support for 5212 parts o split 5212 rfgain handling out o improve ani debugging o add AH_USE_INIPDGAIN compile option o purge a bunch of dead 5212 state o add 1/2 and 1/4 rate modes o remove HAL_CAP_CHAN_HALFRATE and HAL_CAP_CHAN_QUARTERRATE; the same info can now be deduced from the set of supported modes
2008-11-28 00:48:05 +00:00
struct ar5416PerCal ah_cal; /* periodic calibration state */
Bring over some NF calibration changes from ath9k. Each different radio chipset has a different "good" range of CCA (clear channel access) parameters where, if you write something out of range, it's possible the radio will go deaf. Also, since apparently occasionally reading the NF calibration returns "wrong" values, so enforce those limits on what is being written into the CCA register. Write a default value if there's no history available. This isn't the case right now but it may be later on when "off-channel" scanning occurs without init'ing or changing the NF history buffer. (As each channel may have a different noise floor; so scanning or other off-channel activity shouldn't affect the NF history of the current channel.)
2011-01-29 14:27:20 +00:00
struct ar5416NfLimits nf_2g;
struct ar5416NfLimits nf_5g;
Implement open-loop TX power control (OLC) for Merlin (AR9280) and generally tidy up the TX power programming code. Enforce that the TX power offset for Merlin is -5 dBm, rather than any other value programmable in the EEPROM. This requires some further code to be ported over from ath9k, so until that is done and tested, fail to attach NICs whose TX power offset isn't -5 dBm. This improves both legacy and HT transmission on my merlin board. It allows for stable MCS TX up to MCS15. Specifics: * Refactor out a bunch of the TX power calibration code - setting/obtaining the power detector / gain boundaries, programming the PDADC * Take the -5 dBm TX power offset into account on Merlin - "0" in the per-rate TX power register means -5 dBm, not 0 dBm * When doing OLC * Enforce min (0) and max (AR5416_MAX_RATE_POWER) when fiddling with the TX power, to avoid the TX power values from wrapping when low. * Implement the 1 dBm cck power offset when doing OLC * Implement temperature compensation for 2.4ghz mode when doing OLC * Implement an AR9280 specific TX power calibration routine which includes the OLC twiddles, leaving the earlier chipset path (AR5416, AR9160) alone Whilst here, use these refactored routines for the AR9285 TX power calibration/programming code and enforce correct overflow/underflow handling when fiddling with TX power values. Obtained from: linux ath9k
2011-03-08 06:59:59 +00:00
int initPDADC;
Introduce the Merlin PWDCLKIND workaround. This is something bus clock related from what I can gather. It is needed for the AR9220 based Ubiquiti SR71-12 and SR71-15 Mini-PCI NICs. (Note: those NICs don't work right now because of earlier changes to handle power table offset correctly. That'll be resolved in a follow-up commit.)
2011-03-10 02:09:06 +00:00
int ah_need_an_top2_fixup; /* merlin or later chips that may need this workaround */
virgin import of ath hal
2008-11-28 00:03:41 +00:00
};
#define AH5416(_ah) ((struct ath_hal_5416 *)(_ah))
#define IS_5416_PCI(ah) ((AH_PRIVATE(ah)->ah_macVersion) == AR_SREV_VERSION_OWL_PCI)
#define IS_5416_PCIE(ah) ((AH_PRIVATE(ah)->ah_macVersion) == AR_SREV_VERSION_OWL_PCIE)
#undef IS_PCIE
#define IS_PCIE(ah) (IS_5416_PCIE(ah))
extern HAL_BOOL ar2133RfAttach(struct ath_hal *, HAL_STATUS *);
struct ath_hal;
5416 and later parts get the radio rev differently; add ar5416GetRadioRev to do it the right way
2009-02-23 23:54:08 +00:00
extern uint32_t ar5416GetRadioRev(struct ath_hal *ah);
virgin import of ath hal
2008-11-28 00:03:41 +00:00
extern void ar5416InitState(struct ath_hal_5416 *, uint16_t devid,
HAL_SOFTC sc, HAL_BUS_TAG st, HAL_BUS_HANDLE sh,
HAL_STATUS *status);
extern void ar5416Detach(struct ath_hal *ah);
Add PCIE power control api: o add ah_configPCIE and ah_disablePCIE for drivers to configure PCIE power save operation (modeled after ath9k, may need changes) o add private state flag to indicate if device is PCIE (replaces private hack in 5212 code) o add serdes programming ini bits for 5416 and later parts and setup for each part (5416 and 9160 logic hand-crafted from existing routines); 5212 remains open-coded but is now hooked in via ah_configPCIE o add PCIE workaround gunk o add ar5416AttachPCIE for iodomatic code used by 5416 and later parts
2009-02-24 01:07:06 +00:00
extern void ar5416AttachPCIE(struct ath_hal *ah);
virgin import of ath hal
2008-11-28 00:03:41 +00:00
extern HAL_BOOL ar5416FillCapabilityInfo(struct ath_hal *ah);
Update to later code from my repository: o many bug fixes o add new periodic calibration api o break up 5416 periodic calibration code in preparation for 928x o move get noise floor to rf backends o 5416-specific ani (still disabled) o modularize 5210 eeprom format a la other eeprom formats o start cleaning up regdomain code o prepare for proper 1/2 and 1/4 width channel support o bring back 900MHz card support o clean up 5212 rf version handling o add 1/2 and 1/4 width channel support for 5212 parts o split 5212 rfgain handling out o improve ani debugging o add AH_USE_INIPDGAIN compile option o purge a bunch of dead 5212 state o add 1/2 and 1/4 rate modes o remove HAL_CAP_CHAN_HALFRATE and HAL_CAP_CHAN_QUARTERRATE; the same info can now be deduced from the set of supported modes
2008-11-28 00:48:05 +00:00
extern void ar5416AniAttach(struct ath_hal *, const struct ar5212AniParams *,
const struct ar5212AniParams *, HAL_BOOL ena);
extern void ar5416AniDetach(struct ath_hal *);
extern HAL_BOOL ar5416AniControl(struct ath_hal *, HAL_ANI_CMD cmd, int param);
extern HAL_BOOL ar5416AniSetParams(struct ath_hal *,
const struct ar5212AniParams *, const struct ar5212AniParams *);
extern void ar5416ProcessMibIntr(struct ath_hal *, const HAL_NODE_STATS *);
ANI changes #1 - split out the ANI polling from the RxMonitor hook. The rxmonitor hook is called on each received packet. This can get very, very busy as the tx/rx/chanbusy registers are thus read each time a packet is received. Instead, shuffle out the true per-packet processing which is needed and move the rest of the ANI processing into a periodic event which runs every 100ms by default.
2011-01-21 05:21:00 +00:00
extern void ar5416RxMonitor(struct ath_hal *, const HAL_NODE_STATS *,
Overhaul regulatory support: o remove HAL_CHANNEL; convert the hal to use net80211 channels; this mostly involves mechanical changes to variable names and channel attribute macros o gut HAL_CHANNEL_PRIVATE as most of the contents are now redundant with the net80211 channel available o change api for ath_hal_init_channels: no more reglass id's, no more outdoor indication (was a noop), anM contents o add ath_hal_getchannels to have the hal construct a channel list without altering runtime state; this is used to retrieve the calibration list for the device in ath_getradiocaps o add ath_hal_set_channels to take a channel list and regulatory data from above and construct internal state to match (maps frequencies for 900MHz cards, setup for CTL lookups, etc) o compact the private channel table: we keep one private channel per frequency instead of one per HAL_CHANNEL; this gives a big space savings and potentially improves ani and calibration by sharing state (to be seen; didn't see anything in testing); a new config option AH_MAXCHAN controls the table size (default to 96 which was chosen to be ~3x the largest expected size) o shrink ani state and change to mirror private channel table (one entry per frequency indexed by ic_devdata) o move ani state flags to private channel state o remove country codes; use net80211 definitions instead o remove GSM regulatory support; it's no longer needed now that we pass in channel lists from above o consolidate ADHOC_NO_11A attribute with DISALLOW_ADHOC_11A o simplify initial channel list construction based on the EEPROM contents; we preserve country code support for now but may want to just fallback to a WWR sku and dispatch the discovered country code up to user space so the channel list can be constructed using the master regdomain tables o defer to net80211 for max antenna gain o eliminate sorting of internal channel table; now that we use ic_devdata as an index, table lookups are O(1) o remove internal copy of the country code; the public one is sufficient o remove AH_SUPPORT_11D conditional compilation; we always support 11d o remove ath_hal_ispublicsafetysku; not needed any more o remove ath_hal_isgsmsku; no more GSM stuff o move Conformance Test Limit (CTL) state from private channel to a lookup using per-band pointers cached in the private state block o remove regulatory class id support; was unused and belongs in net80211 o fix channel list construction to set IEEE80211_CHAN_NOADHOC, IEEE80211_CHAN_NOHOSTAP, and IEEE80211_CHAN_4MSXMIT o remove private channel flags CHANNEL_DFS and CHANNEL_4MS_LIMIT; these are now set in the constructed net80211 channel o store CHANNEL_NFCREQUIRED (Noise Floor Required) channel attribute in one of the driver-private flag bits of the net80211 channel o move 900MHz frequency mapping into the hal; the mapped frequency is stored in the private channel and used throughout the hal (no more mapping in the driver and/or net80211) o remove ath_hal_mhz2ieee; it's no longer needed as net80211 does the calculation and available in the net80211 channel o change noise floor calibration logic to work with compacted private channel table setup; this may require revisiting as we no longer can distinguish channel attributes (e.g. 11b vs 11g vs turbo) but since the data is used only to calculate status data we can live with it for now o change ah_getChipPowerLimits internal method to operate on a single channel instead of all channels in the private channel table o add ath_hal_gethwchannel to map a net80211 channel to a h/w frequency (always the same except for 900MHz channels) o add HAL_EEBADREG and HAL_EEBADCC status codes to better identify regulatory problems o remove CTRY_DEBUG and CTRY_DEFAULT enum's; these come from net80211 now o change ath_hal_getwirelessmodes to really return wireless modes supported by the hardware (was previously applying regulatory constraints) o return channel interference status with IEEE80211_CHANSTATE_CWINT (should change to a callback so hal api's can take const pointers) o remove some #define's no longer needed with the inclusion of <net80211/_ieee80211.h> Sponsored by: Carlson Wireless
2009-01-28 18:00:22 +00:00
const struct ieee80211_channel *);
ANI changes #1 - split out the ANI polling from the RxMonitor hook. The rxmonitor hook is called on each received packet. This can get very, very busy as the tx/rx/chanbusy registers are thus read each time a packet is received. Instead, shuffle out the true per-packet processing which is needed and move the rest of the ANI processing into a periodic event which runs every 100ms by default.
2011-01-21 05:21:00 +00:00
extern void ar5416AniPoll(struct ath_hal *, const struct ieee80211_channel *);
Overhaul regulatory support: o remove HAL_CHANNEL; convert the hal to use net80211 channels; this mostly involves mechanical changes to variable names and channel attribute macros o gut HAL_CHANNEL_PRIVATE as most of the contents are now redundant with the net80211 channel available o change api for ath_hal_init_channels: no more reglass id's, no more outdoor indication (was a noop), anM contents o add ath_hal_getchannels to have the hal construct a channel list without altering runtime state; this is used to retrieve the calibration list for the device in ath_getradiocaps o add ath_hal_set_channels to take a channel list and regulatory data from above and construct internal state to match (maps frequencies for 900MHz cards, setup for CTL lookups, etc) o compact the private channel table: we keep one private channel per frequency instead of one per HAL_CHANNEL; this gives a big space savings and potentially improves ani and calibration by sharing state (to be seen; didn't see anything in testing); a new config option AH_MAXCHAN controls the table size (default to 96 which was chosen to be ~3x the largest expected size) o shrink ani state and change to mirror private channel table (one entry per frequency indexed by ic_devdata) o move ani state flags to private channel state o remove country codes; use net80211 definitions instead o remove GSM regulatory support; it's no longer needed now that we pass in channel lists from above o consolidate ADHOC_NO_11A attribute with DISALLOW_ADHOC_11A o simplify initial channel list construction based on the EEPROM contents; we preserve country code support for now but may want to just fallback to a WWR sku and dispatch the discovered country code up to user space so the channel list can be constructed using the master regdomain tables o defer to net80211 for max antenna gain o eliminate sorting of internal channel table; now that we use ic_devdata as an index, table lookups are O(1) o remove internal copy of the country code; the public one is sufficient o remove AH_SUPPORT_11D conditional compilation; we always support 11d o remove ath_hal_ispublicsafetysku; not needed any more o remove ath_hal_isgsmsku; no more GSM stuff o move Conformance Test Limit (CTL) state from private channel to a lookup using per-band pointers cached in the private state block o remove regulatory class id support; was unused and belongs in net80211 o fix channel list construction to set IEEE80211_CHAN_NOADHOC, IEEE80211_CHAN_NOHOSTAP, and IEEE80211_CHAN_4MSXMIT o remove private channel flags CHANNEL_DFS and CHANNEL_4MS_LIMIT; these are now set in the constructed net80211 channel o store CHANNEL_NFCREQUIRED (Noise Floor Required) channel attribute in one of the driver-private flag bits of the net80211 channel o move 900MHz frequency mapping into the hal; the mapped frequency is stored in the private channel and used throughout the hal (no more mapping in the driver and/or net80211) o remove ath_hal_mhz2ieee; it's no longer needed as net80211 does the calculation and available in the net80211 channel o change noise floor calibration logic to work with compacted private channel table setup; this may require revisiting as we no longer can distinguish channel attributes (e.g. 11b vs 11g vs turbo) but since the data is used only to calculate status data we can live with it for now o change ah_getChipPowerLimits internal method to operate on a single channel instead of all channels in the private channel table o add ath_hal_gethwchannel to map a net80211 channel to a h/w frequency (always the same except for 900MHz channels) o add HAL_EEBADREG and HAL_EEBADCC status codes to better identify regulatory problems o remove CTRY_DEBUG and CTRY_DEFAULT enum's; these come from net80211 now o change ath_hal_getwirelessmodes to really return wireless modes supported by the hardware (was previously applying regulatory constraints) o return channel interference status with IEEE80211_CHANSTATE_CWINT (should change to a callback so hal api's can take const pointers) o remove some #define's no longer needed with the inclusion of <net80211/_ieee80211.h> Sponsored by: Carlson Wireless
2009-01-28 18:00:22 +00:00
extern void ar5416AniReset(struct ath_hal *, const struct ieee80211_channel *,
Update to later code from my repository: o many bug fixes o add new periodic calibration api o break up 5416 periodic calibration code in preparation for 928x o move get noise floor to rf backends o 5416-specific ani (still disabled) o modularize 5210 eeprom format a la other eeprom formats o start cleaning up regdomain code o prepare for proper 1/2 and 1/4 width channel support o bring back 900MHz card support o clean up 5212 rf version handling o add 1/2 and 1/4 width channel support for 5212 parts o split 5212 rfgain handling out o improve ani debugging o add AH_USE_INIPDGAIN compile option o purge a bunch of dead 5212 state o add 1/2 and 1/4 rate modes o remove HAL_CAP_CHAN_HALFRATE and HAL_CAP_CHAN_QUARTERRATE; the same info can now be deduced from the set of supported modes
2008-11-28 00:48:05 +00:00
HAL_OPMODE, int);
virgin import of ath hal
2008-11-28 00:03:41 +00:00
extern void ar5416SetBeaconTimers(struct ath_hal *, const HAL_BEACON_TIMERS *);
extern void ar5416BeaconInit(struct ath_hal *ah,
uint32_t next_beacon, uint32_t beacon_period);
extern void ar5416ResetStaBeaconTimers(struct ath_hal *ah);
extern void ar5416SetStaBeaconTimers(struct ath_hal *ah,
const HAL_BEACON_STATE *);
Update the TSF and next-TBTT methods to work for the AR5416 and later NICs. This is another commit in a series of TDMA support fixes for the 11n NICs. * Move ath_hal_getnexttbtt() into the HAL; write methods for it. This returns a timer value in TSF, rather than TU. * Move ath_hal_getcca() and ath_hal_setcca() into the HAL too, where they likely now belong. * Create a new HAL capability: HAL_CAP_LONG_RXDESC_TSF. The pre-11n NICs write 15 bit TSF snapshots into the RX descriptor; the AR5416 and later write 32 bit TSF snapshots into the RX descriptor. * Use the new capability to choose between 15 and 31 bit TSF adjustment functions in ath_extend_tsf(). * Write ar5416GetTsf64() and ar5416SetTsf64() methods. ar5416GetTsf64() tries to compensate for TSF changes at the 32 bit boundary. According to yin, this fixes the TDMA beaconing on 11n chipsets and TDMA stations can now associate/talk, but there are still issues with traffic stability which need to be investigated. The ath_hal_extendtsf() function is also used in RX packet timestamping; this may improve adhoc mode on the 11n chipsets. It also will affect the timestamps seen in radiotap frames. Submitted by: Kang Yin Su <cantona@cantona.net> Approved by: re (kib)
2011-09-08 01:23:05 +00:00
extern uint64_t ar5416GetNextTBTT(struct ath_hal *);
virgin import of ath hal
2008-11-28 00:03:41 +00:00
extern HAL_BOOL ar5416EepromRead(struct ath_hal *, u_int off, uint16_t *data);
extern HAL_BOOL ar5416EepromWrite(struct ath_hal *, u_int off, uint16_t data);
extern HAL_BOOL ar5416IsInterruptPending(struct ath_hal *ah);
extern HAL_BOOL ar5416GetPendingInterrupts(struct ath_hal *, HAL_INT *masked);
extern HAL_INT ar5416SetInterrupts(struct ath_hal *ah, HAL_INT ints);
5416 and later parts mux the gpio outputs; extend the api to include a signal type that's used to select the appropriate mux
2009-02-24 00:12:16 +00:00
extern HAL_BOOL ar5416GpioCfgOutput(struct ath_hal *, uint32_t gpio,
HAL_GPIO_MUX_TYPE);
virgin import of ath hal
2008-11-28 00:03:41 +00:00
extern HAL_BOOL ar5416GpioCfgInput(struct ath_hal *, uint32_t gpio);
extern HAL_BOOL ar5416GpioSet(struct ath_hal *, uint32_t gpio, uint32_t val);
extern uint32_t ar5416GpioGet(struct ath_hal *ah, uint32_t gpio);
extern void ar5416GpioSetIntr(struct ath_hal *ah, u_int, uint32_t ilevel);
extern u_int ar5416GetWirelessModes(struct ath_hal *ah);
extern void ar5416SetLedState(struct ath_hal *ah, HAL_LED_STATE state);
Update the TSF and next-TBTT methods to work for the AR5416 and later NICs. This is another commit in a series of TDMA support fixes for the 11n NICs. * Move ath_hal_getnexttbtt() into the HAL; write methods for it. This returns a timer value in TSF, rather than TU. * Move ath_hal_getcca() and ath_hal_setcca() into the HAL too, where they likely now belong. * Create a new HAL capability: HAL_CAP_LONG_RXDESC_TSF. The pre-11n NICs write 15 bit TSF snapshots into the RX descriptor; the AR5416 and later write 32 bit TSF snapshots into the RX descriptor. * Use the new capability to choose between 15 and 31 bit TSF adjustment functions in ath_extend_tsf(). * Write ar5416GetTsf64() and ar5416SetTsf64() methods. ar5416GetTsf64() tries to compensate for TSF changes at the 32 bit boundary. According to yin, this fixes the TDMA beaconing on 11n chipsets and TDMA stations can now associate/talk, but there are still issues with traffic stability which need to be investigated. The ath_hal_extendtsf() function is also used in RX packet timestamping; this may improve adhoc mode on the 11n chipsets. It also will affect the timestamps seen in radiotap frames. Submitted by: Kang Yin Su <cantona@cantona.net> Approved by: re (kib)
2011-09-08 01:23:05 +00:00
extern uint64_t ar5416GetTsf64(struct ath_hal *ah);
extern void ar5416SetTsf64(struct ath_hal *ah, uint64_t tsf64);
virgin import of ath hal
2008-11-28 00:03:41 +00:00
extern void ar5416ResetTsf(struct ath_hal *ah);
Add an AR5416 aware version of the "current RSSI" function. Pre-11n devices and AR5416 use AR_PHY(263) for current RX RSSI. AR9130 and later have a fourth calibration register (for doing ADC calibration) and thus the register has moved to AR_PHY(271). This isn't currently used by any of the active code; I'm committing this for completeness and in case any third party code attempts to use it for legacy reasons.
2011-10-04 00:32:10 +00:00
extern uint32_t ar5416GetCurRssi(struct ath_hal *ah);
virgin import of ath hal
2008-11-28 00:03:41 +00:00
extern HAL_BOOL ar5416SetAntennaSwitch(struct ath_hal *, HAL_ANT_SETTING);
extern HAL_BOOL ar5416SetDecompMask(struct ath_hal *, uint16_t, int);
extern void ar5416SetCoverageClass(struct ath_hal *, uint8_t, int);
Extend the ANI code to implement basic channel survey support. * Always call ar5416GetListenTime() * Modify ar5416GetListenTime() to: + don't update the ANI state if there isn't any ANI state; + don't update the channel survey state if there's no active channel - just to be paranoid + copy the channel survey results into the current sample slot based on the current channel; then increment the sample counter and sample history counter. * Modify ar5416GetMIBCyclesPct() to simply return a HAL_SURVEY_SAMPLE, rather than a set of percentages. The ANI code wasn't using the percentages anyway. TODO: * Create a new function which fetches the survey results periodically * .. then modify the ANI code to use the pre-fetched values rather than fetching them again * Roll the 11n ext busy function from ar5416_misc.c to update all the counters, then do the result calculation * .. then, modify the MIB counter routine to correctly fetch a snapshot - freeze the counters, fetch the values, then reset the counters.
2012-04-28 08:29:46 +00:00
extern uint32_t ar5416GetMibCycleCounts(struct ath_hal *ah,
HAL_SURVEY_SAMPLE *hsample);
virgin import of ath hal
2008-11-28 00:03:41 +00:00
extern uint32_t ar5416Get11nExtBusy(struct ath_hal *ah);
extern void ar5416Set11nMac2040(struct ath_hal *ah, HAL_HT_MACMODE mode);
extern HAL_HT_RXCLEAR ar5416Get11nRxClear(struct ath_hal *ah);
extern void ar5416Set11nRxClear(struct ath_hal *ah, HAL_HT_RXCLEAR rxclear);
Bring over the relevant registers to use when implementing the quiet time portion of 802.11h. The AR5212 code has been brought over as a reference, it's currently untested. Obtained from: Atheros
2011-06-03 07:27:53 +00:00
extern HAL_STATUS ar5416SetQuiet(struct ath_hal *ah, uint32_t period,
uint32_t duration, uint32_t nextStart, HAL_QUIET_FLAG flag);
virgin import of ath hal
2008-11-28 00:03:41 +00:00
extern HAL_STATUS ar5416GetCapability(struct ath_hal *ah,
HAL_CAPABILITY_TYPE type, uint32_t capability, uint32_t *result);
Extend the HAL code to allow the RX and TX chainmask to be overridden by capabilities. Add an ar5416SetCapability() function, which contains logic to override the chainmask and update the relevant stream. This is designed to be called after the attach function, which presets the TX/RX chainmask and stream. TODO: check the chainmask against the hardware chainmask so non-existing chains aren't enabled.
2012-02-10 09:58:20 +00:00
extern HAL_BOOL ar5416SetCapability(struct ath_hal *ah,
HAL_CAPABILITY_TYPE type, uint32_t capability, uint32_t val,
HAL_STATUS *status);
virgin import of ath hal
2008-11-28 00:03:41 +00:00
extern HAL_BOOL ar5416GetDiagState(struct ath_hal *ah, int request,
const void *args, uint32_t argsize,
void **result, uint32_t *resultsize);
When disabling RIFS for Sowl (AR9160) and Howl (AR9130), make sure RIFS is totally disabled. The Atheros HAL code does this for Sowl/Howl but not for Owl (AR5416) where RIFS is disabled by default. This seems to quieten the occasional baseband hang I've been seeing with the AR9160 in STA mode under constant heavy traffic load. Obtained from: Atheros
2011-05-14 05:43:33 +00:00
extern HAL_BOOL ar5416SetRifsDelay(struct ath_hal *ah,
const struct ieee80211_channel *chan, HAL_BOOL enable);
Break out the radar code into a separate source file. This mirrors the internal HAL organisation and reduces the differences between the HAL codebases slightly. Obtained from: Atheros
2012-02-20 03:07:07 +00:00
Add some missing DFS chipset functionality to the FreeBSD HAL. Please note - this doesn't in any way constitute a full DFS implementation, it merely adds the relevant capability bits and radar detection threshold register access. The particulars: * Add new capability bits outlining what the DFS capabilities are of the various chipsets. * Add HAL methods to set and get the radar related register values. * Add AR5212 and AR5416+ DFS radar related register value routines. * Add a missing HAL phy error code that's related to radar event processing. * Add HAL_PHYERR_PARAM, a data type that encapsulates the radar register values. The AR5212 routines are just for completeness. The AR5416 routines are a super-set of those; I may later on do a drive-by pass to tidy up duplicate code. Obtained from: Linux, Atheros
2011-06-01 20:01:02 +00:00
extern void ar5416EnableDfs(struct ath_hal *ah, HAL_PHYERR_PARAM *pe);
extern void ar5416GetDfsThresh(struct ath_hal *ah, HAL_PHYERR_PARAM *pe);
Flesh out a new HAL method to fetch the radar PHY error frame information. For the AR5211/AR5212, this is apparently a one byte pulse duration counter value. It is only coded up here for the AR5212 as I don't have any AR5211-series hardware to test it on. This information was extracted from the Madwifi DFS branch along with some local additions. Please note - all this does is extract out the radar event duration, it in no way reflects the presence of a radar. Further code is needed to take a set of radar events and filter them to extract out correct radar pulse trains (and ignore other events.) For further information, please see: http://wiki.freebsd.org/dev/ath_hal%284%29/RadarDetection This includes references to the relevant patents which describe what is going on. Obtained from: Madwifi
2011-06-07 09:03:28 +00:00
extern HAL_BOOL ar5416ProcessRadarEvent(struct ath_hal *ah,
struct ath_rx_status *rxs, uint64_t fulltsf, const char *buf,
HAL_DFS_EVENT *event);
Add another HAL method - ah_isFastClockEnabled - which returns AH_TRUE if 5ghz fast clock is enabled in the current operating mode. It's slightly dirty, but it's part of the reference HAL and used by the (currently closed-source) radar event code to map radar pulses back to microsecond durations. Obtained from: Atheros Approved by: re (kib, blanket)
2011-08-08 13:15:39 +00:00
extern HAL_BOOL ar5416IsFastClockEnabled(struct ath_hal *ah);
virgin import of ath hal
2008-11-28 00:03:41 +00:00
extern HAL_BOOL ar5416SetPowerMode(struct ath_hal *ah, HAL_POWER_MODE mode,
int setChip);
extern HAL_POWER_MODE ar5416GetPowerMode(struct ath_hal *ah);
extern HAL_BOOL ar5416GetPowerStatus(struct ath_hal *ah);
extern HAL_BOOL ar5416ResetKeyCacheEntry(struct ath_hal *ah, uint16_t entry);
extern HAL_BOOL ar5416SetKeyCacheEntry(struct ath_hal *ah, uint16_t entry,
const HAL_KEYVAL *k, const uint8_t *mac, int xorKey);
Bring over AR5416 specific RX filter get/set routines. This in particular fixes radar PHY handling - on the AR5212 NIC, one enables the AR_PHY_ERR_RADAR bit in AR_PHY_ERR; the AR5416 and later also needs a bit set in AR_RX_FILTER. A follow-up commit is needed to convert the AR5416 ANI code to use this particular method, as it's currently using the AR5212 methods directly. Obtained from: Atheros Approved by: re (kib)
2011-07-30 13:25:11 +00:00
extern uint32_t ar5416GetRxFilter(struct ath_hal *ah);
extern void ar5416SetRxFilter(struct ath_hal *ah, uint32_t bits);
Add an AR5416 PCU DMA stop method, as a check for the AR9130 is needed. The reference driver has a 3ms delay for the AR9130 but I'm not as yet sure why. From what I can gather, it's likely waiting for some FIFO flush to occur. At some point in the future it may be worthwhile adding a WMAC FIFO flush here, but that'd require some side-call through to the SoC DDR flush routines. Obtained from: Atheros
2012-04-28 03:07:36 +00:00
extern HAL_BOOL ar5416StopDmaReceive(struct ath_hal *ah);
virgin import of ath hal
2008-11-28 00:03:41 +00:00
extern void ar5416StartPcuReceive(struct ath_hal *ah);
extern void ar5416StopPcuReceive(struct ath_hal *ah);
extern HAL_BOOL ar5416SetupRxDesc(struct ath_hal *,
struct ath_desc *, uint32_t size, u_int flags);
extern HAL_STATUS ar5416ProcRxDesc(struct ath_hal *ah, struct ath_desc *,
uint32_t, struct ath_desc *, uint64_t,
struct ath_rx_status *);
extern HAL_BOOL ar5416Reset(struct ath_hal *ah, HAL_OPMODE opmode,
Overhaul regulatory support: o remove HAL_CHANNEL; convert the hal to use net80211 channels; this mostly involves mechanical changes to variable names and channel attribute macros o gut HAL_CHANNEL_PRIVATE as most of the contents are now redundant with the net80211 channel available o change api for ath_hal_init_channels: no more reglass id's, no more outdoor indication (was a noop), anM contents o add ath_hal_getchannels to have the hal construct a channel list without altering runtime state; this is used to retrieve the calibration list for the device in ath_getradiocaps o add ath_hal_set_channels to take a channel list and regulatory data from above and construct internal state to match (maps frequencies for 900MHz cards, setup for CTL lookups, etc) o compact the private channel table: we keep one private channel per frequency instead of one per HAL_CHANNEL; this gives a big space savings and potentially improves ani and calibration by sharing state (to be seen; didn't see anything in testing); a new config option AH_MAXCHAN controls the table size (default to 96 which was chosen to be ~3x the largest expected size) o shrink ani state and change to mirror private channel table (one entry per frequency indexed by ic_devdata) o move ani state flags to private channel state o remove country codes; use net80211 definitions instead o remove GSM regulatory support; it's no longer needed now that we pass in channel lists from above o consolidate ADHOC_NO_11A attribute with DISALLOW_ADHOC_11A o simplify initial channel list construction based on the EEPROM contents; we preserve country code support for now but may want to just fallback to a WWR sku and dispatch the discovered country code up to user space so the channel list can be constructed using the master regdomain tables o defer to net80211 for max antenna gain o eliminate sorting of internal channel table; now that we use ic_devdata as an index, table lookups are O(1) o remove internal copy of the country code; the public one is sufficient o remove AH_SUPPORT_11D conditional compilation; we always support 11d o remove ath_hal_ispublicsafetysku; not needed any more o remove ath_hal_isgsmsku; no more GSM stuff o move Conformance Test Limit (CTL) state from private channel to a lookup using per-band pointers cached in the private state block o remove regulatory class id support; was unused and belongs in net80211 o fix channel list construction to set IEEE80211_CHAN_NOADHOC, IEEE80211_CHAN_NOHOSTAP, and IEEE80211_CHAN_4MSXMIT o remove private channel flags CHANNEL_DFS and CHANNEL_4MS_LIMIT; these are now set in the constructed net80211 channel o store CHANNEL_NFCREQUIRED (Noise Floor Required) channel attribute in one of the driver-private flag bits of the net80211 channel o move 900MHz frequency mapping into the hal; the mapped frequency is stored in the private channel and used throughout the hal (no more mapping in the driver and/or net80211) o remove ath_hal_mhz2ieee; it's no longer needed as net80211 does the calculation and available in the net80211 channel o change noise floor calibration logic to work with compacted private channel table setup; this may require revisiting as we no longer can distinguish channel attributes (e.g. 11b vs 11g vs turbo) but since the data is used only to calculate status data we can live with it for now o change ah_getChipPowerLimits internal method to operate on a single channel instead of all channels in the private channel table o add ath_hal_gethwchannel to map a net80211 channel to a h/w frequency (always the same except for 900MHz channels) o add HAL_EEBADREG and HAL_EEBADCC status codes to better identify regulatory problems o remove CTRY_DEBUG and CTRY_DEFAULT enum's; these come from net80211 now o change ath_hal_getwirelessmodes to really return wireless modes supported by the hardware (was previously applying regulatory constraints) o return channel interference status with IEEE80211_CHANSTATE_CWINT (should change to a callback so hal api's can take const pointers) o remove some #define's no longer needed with the inclusion of <net80211/_ieee80211.h> Sponsored by: Carlson Wireless
2009-01-28 18:00:22 +00:00
struct ieee80211_channel *chan,
HAL_BOOL bChannelChange, HAL_STATUS *status);
virgin import of ath hal
2008-11-28 00:03:41 +00:00
extern HAL_BOOL ar5416PhyDisable(struct ath_hal *ah);
extern HAL_RFGAIN ar5416GetRfgain(struct ath_hal *ah);
extern HAL_BOOL ar5416Disable(struct ath_hal *ah);
Overhaul regulatory support: o remove HAL_CHANNEL; convert the hal to use net80211 channels; this mostly involves mechanical changes to variable names and channel attribute macros o gut HAL_CHANNEL_PRIVATE as most of the contents are now redundant with the net80211 channel available o change api for ath_hal_init_channels: no more reglass id's, no more outdoor indication (was a noop), anM contents o add ath_hal_getchannels to have the hal construct a channel list without altering runtime state; this is used to retrieve the calibration list for the device in ath_getradiocaps o add ath_hal_set_channels to take a channel list and regulatory data from above and construct internal state to match (maps frequencies for 900MHz cards, setup for CTL lookups, etc) o compact the private channel table: we keep one private channel per frequency instead of one per HAL_CHANNEL; this gives a big space savings and potentially improves ani and calibration by sharing state (to be seen; didn't see anything in testing); a new config option AH_MAXCHAN controls the table size (default to 96 which was chosen to be ~3x the largest expected size) o shrink ani state and change to mirror private channel table (one entry per frequency indexed by ic_devdata) o move ani state flags to private channel state o remove country codes; use net80211 definitions instead o remove GSM regulatory support; it's no longer needed now that we pass in channel lists from above o consolidate ADHOC_NO_11A attribute with DISALLOW_ADHOC_11A o simplify initial channel list construction based on the EEPROM contents; we preserve country code support for now but may want to just fallback to a WWR sku and dispatch the discovered country code up to user space so the channel list can be constructed using the master regdomain tables o defer to net80211 for max antenna gain o eliminate sorting of internal channel table; now that we use ic_devdata as an index, table lookups are O(1) o remove internal copy of the country code; the public one is sufficient o remove AH_SUPPORT_11D conditional compilation; we always support 11d o remove ath_hal_ispublicsafetysku; not needed any more o remove ath_hal_isgsmsku; no more GSM stuff o move Conformance Test Limit (CTL) state from private channel to a lookup using per-band pointers cached in the private state block o remove regulatory class id support; was unused and belongs in net80211 o fix channel list construction to set IEEE80211_CHAN_NOADHOC, IEEE80211_CHAN_NOHOSTAP, and IEEE80211_CHAN_4MSXMIT o remove private channel flags CHANNEL_DFS and CHANNEL_4MS_LIMIT; these are now set in the constructed net80211 channel o store CHANNEL_NFCREQUIRED (Noise Floor Required) channel attribute in one of the driver-private flag bits of the net80211 channel o move 900MHz frequency mapping into the hal; the mapped frequency is stored in the private channel and used throughout the hal (no more mapping in the driver and/or net80211) o remove ath_hal_mhz2ieee; it's no longer needed as net80211 does the calculation and available in the net80211 channel o change noise floor calibration logic to work with compacted private channel table setup; this may require revisiting as we no longer can distinguish channel attributes (e.g. 11b vs 11g vs turbo) but since the data is used only to calculate status data we can live with it for now o change ah_getChipPowerLimits internal method to operate on a single channel instead of all channels in the private channel table o add ath_hal_gethwchannel to map a net80211 channel to a h/w frequency (always the same except for 900MHz channels) o add HAL_EEBADREG and HAL_EEBADCC status codes to better identify regulatory problems o remove CTRY_DEBUG and CTRY_DEFAULT enum's; these come from net80211 now o change ath_hal_getwirelessmodes to really return wireless modes supported by the hardware (was previously applying regulatory constraints) o return channel interference status with IEEE80211_CHANSTATE_CWINT (should change to a callback so hal api's can take const pointers) o remove some #define's no longer needed with the inclusion of <net80211/_ieee80211.h> Sponsored by: Carlson Wireless
2009-01-28 18:00:22 +00:00
extern HAL_BOOL ar5416ChipReset(struct ath_hal *ah,
const struct ieee80211_channel *);
Implement open-loop TX power control (OLC) for Merlin (AR9280) and generally tidy up the TX power programming code. Enforce that the TX power offset for Merlin is -5 dBm, rather than any other value programmable in the EEPROM. This requires some further code to be ported over from ath9k, so until that is done and tested, fail to attach NICs whose TX power offset isn't -5 dBm. This improves both legacy and HT transmission on my merlin board. It allows for stable MCS TX up to MCS15. Specifics: * Refactor out a bunch of the TX power calibration code - setting/obtaining the power detector / gain boundaries, programming the PDADC * Take the -5 dBm TX power offset into account on Merlin - "0" in the per-rate TX power register means -5 dBm, not 0 dBm * When doing OLC * Enforce min (0) and max (AR5416_MAX_RATE_POWER) when fiddling with the TX power, to avoid the TX power values from wrapping when low. * Implement the 1 dBm cck power offset when doing OLC * Implement temperature compensation for 2.4ghz mode when doing OLC * Implement an AR9280 specific TX power calibration routine which includes the OLC twiddles, leaving the earlier chipset path (AR5416, AR9160) alone Whilst here, use these refactored routines for the AR9285 TX power calibration/programming code and enforce correct overflow/underflow handling when fiddling with TX power values. Obtained from: linux ath9k
2011-03-08 06:59:59 +00:00
extern int ar5416GetRegChainOffset(struct ath_hal *ah, int i);
Bring back AR9285 support. This fixes most of the issues and should be pretty usable. MFC after: 1 month
2010-02-15 17:49:49 +00:00
extern HAL_BOOL ar5416SetBoardValues(struct ath_hal *,
const struct ieee80211_channel *);
virgin import of ath hal
2008-11-28 00:03:41 +00:00
extern HAL_BOOL ar5416SetResetReg(struct ath_hal *, uint32_t type);
extern HAL_BOOL ar5416SetTxPowerLimit(struct ath_hal *ah, uint32_t limit);
Bring back AR9285 support. This fixes most of the issues and should be pretty usable. MFC after: 1 month
2010-02-15 17:49:49 +00:00
extern HAL_BOOL ar5416SetTransmitPower(struct ath_hal *,
const struct ieee80211_channel *, uint16_t *);
virgin import of ath hal
2008-11-28 00:03:41 +00:00
extern HAL_BOOL ar5416GetChipPowerLimits(struct ath_hal *ah,
Overhaul regulatory support: o remove HAL_CHANNEL; convert the hal to use net80211 channels; this mostly involves mechanical changes to variable names and channel attribute macros o gut HAL_CHANNEL_PRIVATE as most of the contents are now redundant with the net80211 channel available o change api for ath_hal_init_channels: no more reglass id's, no more outdoor indication (was a noop), anM contents o add ath_hal_getchannels to have the hal construct a channel list without altering runtime state; this is used to retrieve the calibration list for the device in ath_getradiocaps o add ath_hal_set_channels to take a channel list and regulatory data from above and construct internal state to match (maps frequencies for 900MHz cards, setup for CTL lookups, etc) o compact the private channel table: we keep one private channel per frequency instead of one per HAL_CHANNEL; this gives a big space savings and potentially improves ani and calibration by sharing state (to be seen; didn't see anything in testing); a new config option AH_MAXCHAN controls the table size (default to 96 which was chosen to be ~3x the largest expected size) o shrink ani state and change to mirror private channel table (one entry per frequency indexed by ic_devdata) o move ani state flags to private channel state o remove country codes; use net80211 definitions instead o remove GSM regulatory support; it's no longer needed now that we pass in channel lists from above o consolidate ADHOC_NO_11A attribute with DISALLOW_ADHOC_11A o simplify initial channel list construction based on the EEPROM contents; we preserve country code support for now but may want to just fallback to a WWR sku and dispatch the discovered country code up to user space so the channel list can be constructed using the master regdomain tables o defer to net80211 for max antenna gain o eliminate sorting of internal channel table; now that we use ic_devdata as an index, table lookups are O(1) o remove internal copy of the country code; the public one is sufficient o remove AH_SUPPORT_11D conditional compilation; we always support 11d o remove ath_hal_ispublicsafetysku; not needed any more o remove ath_hal_isgsmsku; no more GSM stuff o move Conformance Test Limit (CTL) state from private channel to a lookup using per-band pointers cached in the private state block o remove regulatory class id support; was unused and belongs in net80211 o fix channel list construction to set IEEE80211_CHAN_NOADHOC, IEEE80211_CHAN_NOHOSTAP, and IEEE80211_CHAN_4MSXMIT o remove private channel flags CHANNEL_DFS and CHANNEL_4MS_LIMIT; these are now set in the constructed net80211 channel o store CHANNEL_NFCREQUIRED (Noise Floor Required) channel attribute in one of the driver-private flag bits of the net80211 channel o move 900MHz frequency mapping into the hal; the mapped frequency is stored in the private channel and used throughout the hal (no more mapping in the driver and/or net80211) o remove ath_hal_mhz2ieee; it's no longer needed as net80211 does the calculation and available in the net80211 channel o change noise floor calibration logic to work with compacted private channel table setup; this may require revisiting as we no longer can distinguish channel attributes (e.g. 11b vs 11g vs turbo) but since the data is used only to calculate status data we can live with it for now o change ah_getChipPowerLimits internal method to operate on a single channel instead of all channels in the private channel table o add ath_hal_gethwchannel to map a net80211 channel to a h/w frequency (always the same except for 900MHz channels) o add HAL_EEBADREG and HAL_EEBADCC status codes to better identify regulatory problems o remove CTRY_DEBUG and CTRY_DEFAULT enum's; these come from net80211 now o change ath_hal_getwirelessmodes to really return wireless modes supported by the hardware (was previously applying regulatory constraints) o return channel interference status with IEEE80211_CHANSTATE_CWINT (should change to a callback so hal api's can take const pointers) o remove some #define's no longer needed with the inclusion of <net80211/_ieee80211.h> Sponsored by: Carlson Wireless
2009-01-28 18:00:22 +00:00
struct ieee80211_channel *chan);
virgin import of ath hal
2008-11-28 00:03:41 +00:00
extern void ar5416GetChannelCenters(struct ath_hal *,
Overhaul regulatory support: o remove HAL_CHANNEL; convert the hal to use net80211 channels; this mostly involves mechanical changes to variable names and channel attribute macros o gut HAL_CHANNEL_PRIVATE as most of the contents are now redundant with the net80211 channel available o change api for ath_hal_init_channels: no more reglass id's, no more outdoor indication (was a noop), anM contents o add ath_hal_getchannels to have the hal construct a channel list without altering runtime state; this is used to retrieve the calibration list for the device in ath_getradiocaps o add ath_hal_set_channels to take a channel list and regulatory data from above and construct internal state to match (maps frequencies for 900MHz cards, setup for CTL lookups, etc) o compact the private channel table: we keep one private channel per frequency instead of one per HAL_CHANNEL; this gives a big space savings and potentially improves ani and calibration by sharing state (to be seen; didn't see anything in testing); a new config option AH_MAXCHAN controls the table size (default to 96 which was chosen to be ~3x the largest expected size) o shrink ani state and change to mirror private channel table (one entry per frequency indexed by ic_devdata) o move ani state flags to private channel state o remove country codes; use net80211 definitions instead o remove GSM regulatory support; it's no longer needed now that we pass in channel lists from above o consolidate ADHOC_NO_11A attribute with DISALLOW_ADHOC_11A o simplify initial channel list construction based on the EEPROM contents; we preserve country code support for now but may want to just fallback to a WWR sku and dispatch the discovered country code up to user space so the channel list can be constructed using the master regdomain tables o defer to net80211 for max antenna gain o eliminate sorting of internal channel table; now that we use ic_devdata as an index, table lookups are O(1) o remove internal copy of the country code; the public one is sufficient o remove AH_SUPPORT_11D conditional compilation; we always support 11d o remove ath_hal_ispublicsafetysku; not needed any more o remove ath_hal_isgsmsku; no more GSM stuff o move Conformance Test Limit (CTL) state from private channel to a lookup using per-band pointers cached in the private state block o remove regulatory class id support; was unused and belongs in net80211 o fix channel list construction to set IEEE80211_CHAN_NOADHOC, IEEE80211_CHAN_NOHOSTAP, and IEEE80211_CHAN_4MSXMIT o remove private channel flags CHANNEL_DFS and CHANNEL_4MS_LIMIT; these are now set in the constructed net80211 channel o store CHANNEL_NFCREQUIRED (Noise Floor Required) channel attribute in one of the driver-private flag bits of the net80211 channel o move 900MHz frequency mapping into the hal; the mapped frequency is stored in the private channel and used throughout the hal (no more mapping in the driver and/or net80211) o remove ath_hal_mhz2ieee; it's no longer needed as net80211 does the calculation and available in the net80211 channel o change noise floor calibration logic to work with compacted private channel table setup; this may require revisiting as we no longer can distinguish channel attributes (e.g. 11b vs 11g vs turbo) but since the data is used only to calculate status data we can live with it for now o change ah_getChipPowerLimits internal method to operate on a single channel instead of all channels in the private channel table o add ath_hal_gethwchannel to map a net80211 channel to a h/w frequency (always the same except for 900MHz channels) o add HAL_EEBADREG and HAL_EEBADCC status codes to better identify regulatory problems o remove CTRY_DEBUG and CTRY_DEFAULT enum's; these come from net80211 now o change ath_hal_getwirelessmodes to really return wireless modes supported by the hardware (was previously applying regulatory constraints) o return channel interference status with IEEE80211_CHANSTATE_CWINT (should change to a callback so hal api's can take const pointers) o remove some #define's no longer needed with the inclusion of <net80211/_ieee80211.h> Sponsored by: Carlson Wireless
2009-01-28 18:00:22 +00:00
const struct ieee80211_channel *chan, CHAN_CENTERS *centers);
Remove duplicate code - add a function which calculates the ratesArray[] table which contains the per-rate target TX power. This code is shared between the v14 eeprom board setup (AR5416, AR9160, AR9280) and will also be used by the upcoming Kite (AR9287) support.
2011-05-13 10:36:38 +00:00
extern void ar5416SetRatesArrayFromTargetPower(struct ath_hal *ah,
const struct ieee80211_channel *chan,
int16_t *ratesArray,
const CAL_TARGET_POWER_LEG *targetPowerCck,
const CAL_TARGET_POWER_LEG *targetPowerCckExt,
const CAL_TARGET_POWER_LEG *targetPowerOfdm,
const CAL_TARGET_POWER_LEG *targetPowerOfdmExt,
const CAL_TARGET_POWER_HT *targetPowerHt20,
const CAL_TARGET_POWER_HT *targetPowerHt40);
Bring back AR9285 support. This fixes most of the issues and should be pretty usable. MFC after: 1 month
2010-02-15 17:49:49 +00:00
extern void ar5416GetTargetPowers(struct ath_hal *ah,
const struct ieee80211_channel *chan,
CAL_TARGET_POWER_HT *powInfo,
uint16_t numChannels, CAL_TARGET_POWER_HT *pNewPower,
uint16_t numRates, HAL_BOOL isHt40Target);
extern void ar5416GetTargetPowersLeg(struct ath_hal *ah,
const struct ieee80211_channel *chan,
CAL_TARGET_POWER_LEG *powInfo,
uint16_t numChannels, CAL_TARGET_POWER_LEG *pNewPower,
uint16_t numRates, HAL_BOOL isExtTarget);
Break out the chainmask init code into a new function - ar5416InitChainMasks() . ath9k does a few different things here during config - if it's an early AR5416 with two chains, it enables all three chains for calibration and then restores the chainmask to the original values after initial calibration has completed. The reason behind this commit is to begin breaking out the chainmask configuration for this specific reason; follow-up commits will add the chainmask restore in the ar5416Reset() routine.
2011-01-26 10:08:37 +00:00
extern void ar5416InitChainMasks(struct ath_hal *ah);
Add ar5416RestoreChainMask() which will undo any AR5416 specific chainmask overriding after calibration. This will get set for other two chain radios, such as AR9280 and later on, AR9287. It should however be a nul operation.
2011-01-26 10:48:29 +00:00
extern void ar5416RestoreChainMask(struct ath_hal *ah);
Bring over an XPA (external power amplifer) bias fix for the AR9160. This fix modifies the const addac initval array, rather than modifying a local copy. It means that running >1 AR9160 on a board may prove to be unpredictable. The AR5416 init path also does something similar, so supporting >1 AR5416 of different revisions could cause problems. The later fix will be to create a private copy of the Addac data for the AR5416, AR9160 (and AR9100 when it's merged in) and then modify that as needed. Obtained From: Linux ath9k
2011-03-22 10:29:36 +00:00
extern void ar5416EepromSetAddac(struct ath_hal *ah,
const struct ieee80211_channel *chan);
Remove some duplicate code from the AR9285 TX power configuration path.
2011-04-16 11:59:37 +00:00
extern uint16_t ar5416GetMaxEdgePower(uint16_t freq,
CAL_CTL_EDGES *pRdEdgesPower, HAL_BOOL is2GHz);
Break out the PLL setup into an overridable method. The only method right now is ar5416InitPLL() which handles multiple chipsets; this can now be overridden by newer chipset HAL code.
2011-04-24 15:53:57 +00:00
extern void ar5416InitPLL(struct ath_hal *ah,
const struct ieee80211_channel *chan);
virgin import of ath hal
2008-11-28 00:03:41 +00:00
Implement open-loop TX power control (OLC) for Merlin (AR9280) and generally tidy up the TX power programming code. Enforce that the TX power offset for Merlin is -5 dBm, rather than any other value programmable in the EEPROM. This requires some further code to be ported over from ath9k, so until that is done and tested, fail to attach NICs whose TX power offset isn't -5 dBm. This improves both legacy and HT transmission on my merlin board. It allows for stable MCS TX up to MCS15. Specifics: * Refactor out a bunch of the TX power calibration code - setting/obtaining the power detector / gain boundaries, programming the PDADC * Take the -5 dBm TX power offset into account on Merlin - "0" in the per-rate TX power register means -5 dBm, not 0 dBm * When doing OLC * Enforce min (0) and max (AR5416_MAX_RATE_POWER) when fiddling with the TX power, to avoid the TX power values from wrapping when low. * Implement the 1 dBm cck power offset when doing OLC * Implement temperature compensation for 2.4ghz mode when doing OLC * Implement an AR9280 specific TX power calibration routine which includes the OLC twiddles, leaving the earlier chipset path (AR5416, AR9160) alone Whilst here, use these refactored routines for the AR9285 TX power calibration/programming code and enforce correct overflow/underflow handling when fiddling with TX power values. Obtained from: linux ath9k
2011-03-08 06:59:59 +00:00
/* TX power setup related routines in ar5416_reset.c */
extern void ar5416GetGainBoundariesAndPdadcs(struct ath_hal *ah,
const struct ieee80211_channel *chan, CAL_DATA_PER_FREQ *pRawDataSet,
uint8_t * bChans, uint16_t availPiers,
uint16_t tPdGainOverlap, int16_t *pMinCalPower,
uint16_t * pPdGainBoundaries, uint8_t * pPDADCValues,
uint16_t numXpdGains);
extern void ar5416SetGainBoundariesClosedLoop(struct ath_hal *ah,
* Add in some board settings debugging to log what's being written to the TX closed-loop power control registers. * Modify a couple of functions to take the register chain number, rather than the regChainOffset value. This allows for the register chain to be logged.
2011-03-13 05:30:14 +00:00
int i, uint16_t pdGainOverlap_t2,
Implement open-loop TX power control (OLC) for Merlin (AR9280) and generally tidy up the TX power programming code. Enforce that the TX power offset for Merlin is -5 dBm, rather than any other value programmable in the EEPROM. This requires some further code to be ported over from ath9k, so until that is done and tested, fail to attach NICs whose TX power offset isn't -5 dBm. This improves both legacy and HT transmission on my merlin board. It allows for stable MCS TX up to MCS15. Specifics: * Refactor out a bunch of the TX power calibration code - setting/obtaining the power detector / gain boundaries, programming the PDADC * Take the -5 dBm TX power offset into account on Merlin - "0" in the per-rate TX power register means -5 dBm, not 0 dBm * When doing OLC * Enforce min (0) and max (AR5416_MAX_RATE_POWER) when fiddling with the TX power, to avoid the TX power values from wrapping when low. * Implement the 1 dBm cck power offset when doing OLC * Implement temperature compensation for 2.4ghz mode when doing OLC * Implement an AR9280 specific TX power calibration routine which includes the OLC twiddles, leaving the earlier chipset path (AR5416, AR9160) alone Whilst here, use these refactored routines for the AR9285 TX power calibration/programming code and enforce correct overflow/underflow handling when fiddling with TX power values. Obtained from: linux ath9k
2011-03-08 06:59:59 +00:00
uint16_t gainBoundaries[]);
extern uint16_t ar5416GetXpdGainValues(struct ath_hal *ah, uint16_t xpdMask,
uint16_t xpdGainValues[]);
extern void ar5416WriteDetectorGainBiases(struct ath_hal *ah,
uint16_t numXpdGain, uint16_t xpdGainValues[]);
* Add in some board settings debugging to log what's being written to the TX closed-loop power control registers. * Modify a couple of functions to take the register chain number, rather than the regChainOffset value. This allows for the register chain to be logged.
2011-03-13 05:30:14 +00:00
extern void ar5416WritePdadcValues(struct ath_hal *ah, int i,
Implement open-loop TX power control (OLC) for Merlin (AR9280) and generally tidy up the TX power programming code. Enforce that the TX power offset for Merlin is -5 dBm, rather than any other value programmable in the EEPROM. This requires some further code to be ported over from ath9k, so until that is done and tested, fail to attach NICs whose TX power offset isn't -5 dBm. This improves both legacy and HT transmission on my merlin board. It allows for stable MCS TX up to MCS15. Specifics: * Refactor out a bunch of the TX power calibration code - setting/obtaining the power detector / gain boundaries, programming the PDADC * Take the -5 dBm TX power offset into account on Merlin - "0" in the per-rate TX power register means -5 dBm, not 0 dBm * When doing OLC * Enforce min (0) and max (AR5416_MAX_RATE_POWER) when fiddling with the TX power, to avoid the TX power values from wrapping when low. * Implement the 1 dBm cck power offset when doing OLC * Implement temperature compensation for 2.4ghz mode when doing OLC * Implement an AR9280 specific TX power calibration routine which includes the OLC twiddles, leaving the earlier chipset path (AR5416, AR9160) alone Whilst here, use these refactored routines for the AR9285 TX power calibration/programming code and enforce correct overflow/underflow handling when fiddling with TX power values. Obtained from: linux ath9k
2011-03-08 06:59:59 +00:00
uint8_t pdadcValues[]);
extern HAL_BOOL ar5416SetPowerCalTable(struct ath_hal *ah,
struct ar5416eeprom *pEepData, const struct ieee80211_channel *chan,
int16_t *pTxPowerIndexOffset);
Eliminate code duplication between AR5416/AR9160/AR9280 and AR9285. Writing the TX power registers is the same between all of these chips and later NICs (AR9287, AR9271 USB, etc.) so this will reduce code duplication when those NICs are added to the HAL.
2011-04-24 14:50:29 +00:00
extern void ar5416WriteTxPowerRateRegisters(struct ath_hal *ah,
const struct ieee80211_channel *chan, const int16_t ratesArray[]);
Implement open-loop TX power control (OLC) for Merlin (AR9280) and generally tidy up the TX power programming code. Enforce that the TX power offset for Merlin is -5 dBm, rather than any other value programmable in the EEPROM. This requires some further code to be ported over from ath9k, so until that is done and tested, fail to attach NICs whose TX power offset isn't -5 dBm. This improves both legacy and HT transmission on my merlin board. It allows for stable MCS TX up to MCS15. Specifics: * Refactor out a bunch of the TX power calibration code - setting/obtaining the power detector / gain boundaries, programming the PDADC * Take the -5 dBm TX power offset into account on Merlin - "0" in the per-rate TX power register means -5 dBm, not 0 dBm * When doing OLC * Enforce min (0) and max (AR5416_MAX_RATE_POWER) when fiddling with the TX power, to avoid the TX power values from wrapping when low. * Implement the 1 dBm cck power offset when doing OLC * Implement temperature compensation for 2.4ghz mode when doing OLC * Implement an AR9280 specific TX power calibration routine which includes the OLC twiddles, leaving the earlier chipset path (AR5416, AR9160) alone Whilst here, use these refactored routines for the AR9285 TX power calibration/programming code and enforce correct overflow/underflow handling when fiddling with TX power values. Obtained from: linux ath9k
2011-03-08 06:59:59 +00:00
virgin import of ath hal
2008-11-28 00:03:41 +00:00
extern HAL_BOOL ar5416StopTxDma(struct ath_hal *ah, u_int q);
extern HAL_BOOL ar5416SetupTxDesc(struct ath_hal *ah, struct ath_desc *ds,
u_int pktLen, u_int hdrLen, HAL_PKT_TYPE type, u_int txPower,
u_int txRate0, u_int txTries0,
u_int keyIx, u_int antMode, u_int flags,
u_int rtsctsRate, u_int rtsctsDuration,
u_int compicvLen, u_int compivLen, u_int comp);
extern HAL_BOOL ar5416SetupXTxDesc(struct ath_hal *, struct ath_desc *,
u_int txRate1, u_int txRetries1,
u_int txRate2, u_int txRetries2,
u_int txRate3, u_int txRetries3);
extern HAL_BOOL ar5416FillTxDesc(struct ath_hal *ah, struct ath_desc *ds,
u_int segLen, HAL_BOOL firstSeg, HAL_BOOL lastSeg,
const struct ath_desc *ds0);
extern HAL_STATUS ar5416ProcTxDesc(struct ath_hal *ah,
struct ath_desc *, struct ath_tx_status *);
Add a new HAL method to retrieve the completion schedule. It sets the completion schedule from the hardware and returns AH_TRUE if the hardware supports multi-rate retries (AR5212 and above); and returns AH_FALSE if the hardware doesn't support multi-rate retries. The sample rate module directly reads the TX completion descriptor and extracts the TX schedule information from that. It will be updated in a future commit to instead use this method to determine the completion schedule.
2011-01-20 05:49:15 +00:00
extern HAL_BOOL ar5416GetTxCompletionRates(struct ath_hal *ah,
const struct ath_desc *ds0, int *rates, int *tries);
virgin import of ath hal
2008-11-28 00:03:41 +00:00
Bring over a copy of the AR5212 TX queue reset and setup routines, in preparation for fixing them based on the ath9k related TXQ fixes. I've done this so people can go over the history of the diffs to the original AR5212 routines (which AR5416 and later chips use) to see what's changed.
2011-03-20 08:42:56 +00:00
extern HAL_BOOL ar5416ResetTxQueue(struct ath_hal *ah, u_int q);
extern int ar5416SetupTxQueue(struct ath_hal *ah, HAL_TX_QUEUE type,
const HAL_TXQ_INFO *qInfo);
Link in the 11n specific TX methods into the HAL.
2011-01-29 12:16:26 +00:00
extern HAL_BOOL ar5416ChainTxDesc(struct ath_hal *ah, struct ath_desc *ds,
u_int pktLen, u_int hdrLen, HAL_PKT_TYPE type, u_int keyIx,
Correctly handle AR_MoreAggr when assembling multi-descriptor final frames. Linux ath9k doesn't have this issue as it doesn't try queuing multi- descriptor frames to the hardware. Before, I was only setting the first and last descriptor in the final frame correctly - and that was done by accident. The first descriptor in the last sub-frame was being correctly updated by ath_tx_setds_11n(); the last descriptor in the last sub-frame was being correctly updated by ath_buf_set_rate(). But both of those are "incorrect". The correct behaviour is: * AR_IsAggr is set for all descriptors for all subframes in an aggregate. * AR_MoreAggr is set for all descriptors for all non-final sub-frames in an aggregate. Ie, all descriptors in the last sub-frame of an aggregate must have this field set to 0. I still need to do a couple of extra passes to ensure the pad delimiter field is being correctly handled in all descriptors in the last sub-frame.
2012-04-04 21:49:49 +00:00
HAL_CIPHER cipher, uint8_t delims, u_int segLen,
HAL_BOOL firstSeg, HAL_BOOL lastSeg, HAL_BOOL lastAggr);
Link in the 11n specific TX methods into the HAL.
2011-01-29 12:16:26 +00:00
extern HAL_BOOL ar5416SetupFirstTxDesc(struct ath_hal *ah, struct ath_desc *ds,
u_int aggrLen, u_int flags, u_int txPower, u_int txRate0, u_int txTries0,
u_int antMode, u_int rtsctsRate, u_int rtsctsDuration);
extern HAL_BOOL ar5416SetupLastTxDesc(struct ath_hal *ah, struct ath_desc *ds,
const struct ath_desc *ds0);
extern HAL_BOOL ar5416SetGlobalTxTimeout(struct ath_hal *ah, u_int tu);
extern u_int ar5416GetGlobalTxTimeout(struct ath_hal *ah);
extern void ar5416Set11nRateScenario(struct ath_hal *ah, struct ath_desc *ds,
u_int durUpdateEn, u_int rtsctsRate, HAL_11N_RATE_SERIES series[],
Fix some errors introduced w/ the last commit; fix setting RTS/CTS in the 11n rate scenario. * I messed up a couple of things in if_athvar.h; so fix that. * Undo some guesswork done in ar5416Set11nRateScenario() and introduce a flags parameter which lets the caller set a few things. To begin with, this includes whether to do RTS or CTS protection. * If both RTS and CTS is set, only do RTS. Both RTS and CTS shouldn't be set on a frame.
2011-01-29 12:30:13 +00:00
u_int nseries, u_int flags);
Add some 11n bits from the if_ath_tx 11n branch: * Add the TID field in the TX status descriptor; * Add in the 11n first/middle/last functions for fiddling with the descriptors. These are from the Linux and the reference driver, but I'm not (currently) using them. * Add further AR_ISR_S5 register definitions. Obtained from: Linux ath9k, Atheros
2011-10-25 23:09:07 +00:00
extern void ar5416Set11nAggrFirst(struct ath_hal *ah, struct ath_desc *ds,
u_int aggrLen, u_int numDelims);
Link in the 11n specific TX methods into the HAL.
2011-01-29 12:16:26 +00:00
extern void ar5416Set11nAggrMiddle(struct ath_hal *ah, struct ath_desc *ds, u_int numDelims);
Add some 11n bits from the if_ath_tx 11n branch: * Add the TID field in the TX status descriptor; * Add in the 11n first/middle/last functions for fiddling with the descriptors. These are from the Linux and the reference driver, but I'm not (currently) using them. * Add further AR_ISR_S5 register definitions. Obtained from: Linux ath9k, Atheros
2011-10-25 23:09:07 +00:00
extern void ar5416Set11nAggrLast(struct ath_hal *ah, struct ath_desc *ds);
Link in the 11n specific TX methods into the HAL.
2011-01-29 12:16:26 +00:00
extern void ar5416Clr11nAggr(struct ath_hal *ah, struct ath_desc *ds);
Add some 11n bits from the if_ath_tx 11n branch: * Add the TID field in the TX status descriptor; * Add in the 11n first/middle/last functions for fiddling with the descriptors. These are from the Linux and the reference driver, but I'm not (currently) using them. * Add further AR_ISR_S5 register definitions. Obtained from: Linux ath9k, Atheros
2011-10-25 23:09:07 +00:00
Link in the 11n specific TX methods into the HAL.
2011-01-29 12:16:26 +00:00
extern void ar5416Set11nBurstDuration(struct ath_hal *ah, struct ath_desc *ds, u_int burstDuration);
virgin import of ath hal
2008-11-28 00:03:41 +00:00
extern const HAL_RATE_TABLE *ar5416GetRateTable(struct ath_hal *, u_int mode);
#endif /* _ATH_AR5416_H_ */
Reference in New Issue Copy Permalink