freebsd-dev/sys/contrib/octeon-sdk/cvmx-helper-npi.c

180 lines
5.7 KiB
C
Raw Normal View History

/***********************license start***************
* Copyright (c) 2003-2010 Cavium Inc. (support@cavium.com). All rights
* reserved.
*
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are
* met:
*
* * Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
*
* * Redistributions in binary form must reproduce the above
* copyright notice, this list of conditions and the following
* disclaimer in the documentation and/or other materials provided
* with the distribution.
* * Neither the name of Cavium Inc. nor the names of
* its contributors may be used to endorse or promote products
* derived from this software without specific prior written
* permission.
* This Software, including technical data, may be subject to U.S. export control
* laws, including the U.S. Export Administration Act and its associated
* regulations, and may be subject to export or import regulations in other
* countries.
* TO THE MAXIMUM EXTENT PERMITTED BY LAW, THE SOFTWARE IS PROVIDED "AS IS"
* AND WITH ALL FAULTS AND CAVIUM INC. MAKES NO PROMISES, REPRESENTATIONS OR
* WARRANTIES, EITHER EXPRESS, IMPLIED, STATUTORY, OR OTHERWISE, WITH RESPECT TO
* THE SOFTWARE, INCLUDING ITS CONDITION, ITS CONFORMITY TO ANY REPRESENTATION OR
* DESCRIPTION, OR THE EXISTENCE OF ANY LATENT OR PATENT DEFECTS, AND CAVIUM
* SPECIFICALLY DISCLAIMS ALL IMPLIED (IF ANY) WARRANTIES OF TITLE,
* MERCHANTABILITY, NONINFRINGEMENT, FITNESS FOR A PARTICULAR PURPOSE, LACK OF
* VIRUSES, ACCURACY OR COMPLETENESS, QUIET ENJOYMENT, QUIET POSSESSION OR
* CORRESPONDENCE TO DESCRIPTION. THE ENTIRE RISK ARISING OUT OF USE OR
* PERFORMANCE OF THE SOFTWARE LIES WITH YOU.
***********************license end**************************************/
/**
* @file
*
* Functions for NPI initialization, configuration,
* and monitoring.
*
* <hr>$Revision: 70030 $<hr>
*/
#ifdef CVMX_BUILD_FOR_LINUX_KERNEL
#include <asm/octeon/cvmx.h>
#include <asm/octeon/cvmx-config.h>
#ifdef CVMX_ENABLE_PKO_FUNCTIONS
#include <asm/octeon/cvmx-helper.h>
#include <asm/octeon/cvmx-pko.h>
#include <asm/octeon/cvmx-pexp-defs.h>
#include <asm/octeon/cvmx-sli-defs.h>
#endif
#include <asm/octeon/cvmx-pip-defs.h>
#else
#if !defined(__FreeBSD__) || !defined(_KERNEL)
#include "executive-config.h"
#include "cvmx-config.h"
#include "cvmx.h"
#include "cvmx-pko.h"
#ifdef CVMX_ENABLE_PKO_FUNCTIONS
#include "cvmx-helper.h"
#endif
#else
#include "cvmx.h"
#include "cvmx-pko.h"
#include "cvmx-helper.h"
#endif
#endif
Update the port of FreeBSD to Cavium Octeon to use the Cavium Simple Executive library: o) Increase inline unit / large function growth limits for MIPS to accommodate the needs of the Simple Executive, which uses a shocking amount of inlining. o) Remove TARGET_OCTEON and use CPU_CNMIPS to do things required by cnMIPS and the Octeon SoC. o) Add OCTEON_VENDOR_LANNER to use Lanner's allocation of vendor-specific board numbers, specifically to support the MR320. o) Add OCTEON_BOARD_CAPK_0100ND to hard-wire configuration for the CAPK-0100nd, which improperly uses an evaluation board's board number and breaks board detection at runtime. This board is sold by Portwell as the CAM-0100. o) Add support for the RTC available on some Octeon boards. o) Add support for the Octeon PCI bus. Note that rman_[sg]et_virtual for IO ports can not work unless building for n64. o) Clean up the CompactFlash driver to use Simple Executive macros and structures where possible (it would be advisable to use the Simple Executive API to set the PIO mode, too, but that is not done presently.) Also use structures from FreeBSD's ATA layer rather than structures copied from Linux. o) Print available Octeon SoC features on boot. o) Add support for the Octeon timecounter. o) Use the Simple Executive's routines rather than local copies for doing reads and writes to 64-bit addresses and use its macros for various device addresses rather than using local copies. o) Rename octeon_board_real to octeon_is_simulation to reduce differences with Cavium-provided code originally written for Linux. Also make it use the same simplified test that the Simple Executive and Linux both use rather than our complex one. o) Add support for the Octeon CIU, which is the main interrupt unit, as a bus to use normal interrupt allocation and setup routines. o) Use the Simple Executive's bootmem facility to allocate physical memory for the kernel, rather than assuming we know which addresses we can steal. NB: This may reduce the amount of RAM the kernel reports you as having if you are leaving large temporary allocations made by U-Boot allocated when starting FreeBSD. o) Add a port of the Cavium-provided Ethernet driver for Linux. This changes Ethernet interface naming from rgmxN to octeN. The new driver has vast improvements over the old one, both in performance and functionality, but does still have some features which have not been ported entirely and there may be unimplemented code that can be hit in everyday use. I will make every effort to correct those as they are reported. o) Support loading the kernel on non-contiguous cores. o) Add very conservative support for harvesting randomness from the Octeon random number device. o) Turn SMP on by default. o) Clean up the style of the Octeon kernel configurations a little and make them compile with -march=octeon. o) Add support for the Lanner MR320 and the CAPK-0100nd to the Simple Executive. o) Modify the Simple Executive to build on FreeBSD and to build without executive-config.h or cvmx-config.h. In the future we may want to revert part of these changes and supply executive-config.h and cvmx-config.h and access to the options contained in those files via kernel configuration files. o) Modify the Simple Executive USB routines to support getting and setting of the USB PID.
2010-07-20 19:25:11 +00:00
#ifdef CVMX_ENABLE_PKO_FUNCTIONS
/**
* @INTERNAL
* Probe a NPI interface and determine the number of ports
* connected to it. The NPI interface should still be down
* after this call.
*
* @param interface Interface to probe
*
* @return Number of ports on the interface. Zero to disable.
*/
int __cvmx_helper_npi_probe(int interface)
{
#if CVMX_PKO_QUEUES_PER_PORT_PCI > 0
if (OCTEON_IS_MODEL(OCTEON_CN68XX))
return 32;
#if 0
/* Technically CN30XX, CN31XX, and CN50XX contain packet engines, but
nobody ever uses them. Since this is the case, we disable them here */
else if (OCTEON_IS_MODEL(OCTEON_CN31XX) || OCTEON_IS_MODEL(OCTEON_CN50XX))
return 2;
else if (OCTEON_IS_MODEL(OCTEON_CN30XX))
return 1;
#endif
else if (!(OCTEON_IS_MODEL(OCTEON_CN52XX_PASS1_X) || OCTEON_IS_MODEL(OCTEON_CN56XX_PASS1_X) || OCTEON_IS_MODEL(OCTEON_CN31XX) || OCTEON_IS_MODEL(OCTEON_CN50XX) || OCTEON_IS_MODEL(OCTEON_CN30XX)))
return 4; /* The packet engines didn't exist before cn56xx pass 2 */
#endif
return 0;
}
/**
* @INTERNAL
* Bringup and enable a NPI interface. After this call packet
* I/O should be fully functional. This is called with IPD
* enabled but PKO disabled.
*
* @param interface Interface to bring up
*
* @return Zero on success, negative on failure
*/
int __cvmx_helper_npi_enable(int interface)
{
int num_ports = cvmx_helper_ports_on_interface(interface);
/* On CN50XX, CN52XX, and CN56XX we need to disable length checking
so packet < 64 bytes and jumbo frames don't get errors */
if (!OCTEON_IS_MODEL(OCTEON_CN3XXX) && !OCTEON_IS_MODEL(OCTEON_CN58XX))
{
int port;
for (port=0; port<num_ports; port++)
{
cvmx_pip_prt_cfgx_t port_cfg;
int ipd_port = (OCTEON_IS_MODEL(OCTEON_CN68XX)) ?
cvmx_helper_get_pknd(interface, port) :
cvmx_helper_get_ipd_port(interface, port);
port_cfg.u64 = cvmx_read_csr(CVMX_PIP_PRT_CFGX(ipd_port));
port_cfg.s.lenerr_en = 0;
port_cfg.s.maxerr_en = 0;
port_cfg.s.minerr_en = 0;
cvmx_write_csr(CVMX_PIP_PRT_CFGX(ipd_port), port_cfg.u64);
if (OCTEON_IS_MODEL(OCTEON_CN68XX))
{
/*
* Set up pknd and bpid
*/
cvmx_sli_portx_pkind_t config;
config.u64 = cvmx_read_csr(CVMX_PEXP_SLI_PORTX_PKIND(port));
config.s.bpkind = cvmx_helper_get_bpid(interface, port);
config.s.pkind = cvmx_helper_get_pknd(interface, port);
cvmx_write_csr(CVMX_PEXP_SLI_PORTX_PKIND(port), config.u64);
}
}
}
if (OCTEON_IS_MODEL(OCTEON_CN68XX))
{
/*
* Set up pko pipes.
*/
cvmx_sli_tx_pipe_t config;
config.u64 = cvmx_read_csr(CVMX_PEXP_SLI_TX_PIPE);
config.s.base = __cvmx_pko_get_pipe (interface, 0);
#ifdef CVMX_HELPER_NPI_MAX_PIPES
config.s.nump = CVMX_HELPER_NPI_MAX_PIPES;
#else
config.s.nump = num_ports;
#endif
cvmx_write_csr(CVMX_PEXP_SLI_TX_PIPE, config.u64);
}
/* Enables are controlled by the remote host, so nothing to do here */
return 0;
}
#endif /* CVMX_ENABLE_PKO_FUNCTIONS */