freebsd-dev/sys/netinet6/nd6_nbr.c

1511 lines
39 KiB
C
Raw Normal View History

/*-
* Copyright (C) 1995, 1996, 1997, and 1998 WIDE Project.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the name of the project nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE PROJECT AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE PROJECT OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
2007-12-10 16:03:40 +00:00
*
* $KAME: nd6_nbr.c,v 1.86 2002/01/21 02:33:04 jinmei Exp $
*/
2007-12-10 16:03:40 +00:00
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
#include "opt_inet.h"
#include "opt_inet6.h"
#include "opt_ipsec.h"
#include "opt_mpath.h"
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/malloc.h>
#include <sys/lock.h>
#include <sys/rwlock.h>
#include <sys/mbuf.h>
#include <sys/socket.h>
#include <sys/sockio.h>
#include <sys/time.h>
#include <sys/kernel.h>
#include <sys/errno.h>
#include <sys/syslog.h>
#include <sys/queue.h>
#include <sys/callout.h>
#include <net/if.h>
#include <net/if_types.h>
#include <net/if_dl.h>
#include <net/if_var.h>
#include <net/route.h>
#ifdef RADIX_MPATH
#include <net/radix_mpath.h>
#endif
#include <netinet/in.h>
#include <netinet/in_var.h>
#include <net/if_llatbl.h>
#define L3_ADDR_SIN6(le) ((struct sockaddr_in6 *) L3_ADDR(le))
#include <netinet6/in6_var.h>
#include <netinet6/in6_ifattach.h>
#include <netinet/ip6.h>
#include <netinet6/ip6_var.h>
#include <netinet6/scope6_var.h>
#include <netinet6/nd6.h>
#include <netinet/icmp6.h>
#include <netinet/ip_carp.h>
#define SDL(s) ((struct sockaddr_dl *)s)
struct dadq;
2008-01-08 19:08:58 +00:00
static struct dadq *nd6_dad_find(struct ifaddr *);
static void nd6_dad_starttimer(struct dadq *, int);
static void nd6_dad_stoptimer(struct dadq *);
Change the curvnet variable from a global const struct vnet *, previously always pointing to the default vnet context, to a dynamically changing thread-local one. The currvnet context should be set on entry to networking code via CURVNET_SET() macros, and reverted to previous state via CURVNET_RESTORE(). Recursions on curvnet are permitted, though strongly discuouraged. This change should have no functional impact on nooptions VIMAGE kernel builds, where CURVNET_* macros expand to whitespace. The curthread->td_vnet (aka curvnet) variable's purpose is to be an indicator of the vnet context in which the current network-related operation takes place, in case we cannot deduce the current vnet context from any other source, such as by looking at mbuf's m->m_pkthdr.rcvif->if_vnet, sockets's so->so_vnet etc. Moreover, so far curvnet has turned out to be an invaluable consistency checking aid: it helps to catch cases when sockets, ifnets or any other vnet-aware structures may have leaked from one vnet to another. The exact placement of the CURVNET_SET() / CURVNET_RESTORE() macros was a result of an empirical iterative process, whith an aim to reduce recursions on CURVNET_SET() to a minimum, while still reducing the scope of CURVNET_SET() to networking only operations - the alternative would be calling CURVNET_SET() on each system call entry. In general, curvnet has to be set in three typicall cases: when processing socket-related requests from userspace or from within the kernel; when processing inbound traffic flowing from device drivers to upper layers of the networking stack, and when executing timer-driven networking functions. This change also introduces a DDB subcommand to show the list of all vnet instances. Approved by: julian (mentor)
2009-05-05 10:56:12 +00:00
static void nd6_dad_timer(struct dadq *);
2008-01-08 19:08:58 +00:00
static void nd6_dad_ns_output(struct dadq *, struct ifaddr *);
static void nd6_dad_ns_input(struct ifaddr *);
static void nd6_dad_na_input(struct ifaddr *);
VNET_DEFINE(int, dad_ignore_ns) = 0; /* ignore NS in DAD - specwise incorrect*/
VNET_DEFINE(int, dad_maxtry) = 15; /* max # of *tries* to transmit DAD packet */
#define V_dad_ignore_ns VNET(dad_ignore_ns)
#define V_dad_maxtry VNET(dad_maxtry)
/*
* Input a Neighbor Solicitation Message.
*
* Based on RFC 2461
* Based on RFC 2462 (duplicate address detection)
*/
void
nd6_ns_input(struct mbuf *m, int off, int icmp6len)
{
struct ifnet *ifp = m->m_pkthdr.rcvif;
struct ip6_hdr *ip6 = mtod(m, struct ip6_hdr *);
struct nd_neighbor_solicit *nd_ns;
struct in6_addr saddr6 = ip6->ip6_src;
struct in6_addr daddr6 = ip6->ip6_dst;
struct in6_addr taddr6;
struct in6_addr myaddr6;
char *lladdr = NULL;
struct ifaddr *ifa = NULL;
int lladdrlen = 0;
int anycast = 0, proxy = 0, tentative = 0;
int tlladdr;
union nd_opts ndopts;
struct sockaddr_dl *proxydl = NULL;
char ip6bufs[INET6_ADDRSTRLEN], ip6bufd[INET6_ADDRSTRLEN];
#ifndef PULLDOWN_TEST
IP6_EXTHDR_CHECK(m, off, icmp6len,);
nd_ns = (struct nd_neighbor_solicit *)((caddr_t)ip6 + off);
#else
IP6_EXTHDR_GET(nd_ns, struct nd_neighbor_solicit *, m, off, icmp6len);
if (nd_ns == NULL) {
ICMP6STAT_INC(icp6s_tooshort);
return;
}
#endif
ip6 = mtod(m, struct ip6_hdr *); /* adjust pointer for safety */
taddr6 = nd_ns->nd_ns_target;
if (in6_setscope(&taddr6, ifp, NULL) != 0)
goto bad;
if (ip6->ip6_hlim != 255) {
nd6log((LOG_ERR,
"nd6_ns_input: invalid hlim (%d) from %s to %s on %s\n",
ip6->ip6_hlim, ip6_sprintf(ip6bufs, &ip6->ip6_src),
ip6_sprintf(ip6bufd, &ip6->ip6_dst), if_name(ifp)));
goto bad;
}
if (IN6_IS_ADDR_UNSPECIFIED(&saddr6)) {
/* dst has to be a solicited node multicast address. */
if (daddr6.s6_addr16[0] == IPV6_ADDR_INT16_MLL &&
/* don't check ifindex portion */
daddr6.s6_addr32[1] == 0 &&
daddr6.s6_addr32[2] == IPV6_ADDR_INT32_ONE &&
daddr6.s6_addr8[12] == 0xff) {
; /* good */
} else {
nd6log((LOG_INFO, "nd6_ns_input: bad DAD packet "
"(wrong ip6 dst)\n"));
goto bad;
}
} else if (!V_nd6_onlink_ns_rfc4861) {
struct sockaddr_in6 src_sa6;
/*
* According to recent IETF discussions, it is not a good idea
* to accept a NS from an address which would not be deemed
* to be a neighbor otherwise. This point is expected to be
* clarified in future revisions of the specification.
*/
bzero(&src_sa6, sizeof(src_sa6));
src_sa6.sin6_family = AF_INET6;
src_sa6.sin6_len = sizeof(src_sa6);
src_sa6.sin6_addr = saddr6;
if (nd6_is_addr_neighbor(&src_sa6, ifp) == 0) {
nd6log((LOG_INFO, "nd6_ns_input: "
"NS packet from non-neighbor\n"));
goto bad;
}
}
if (IN6_IS_ADDR_MULTICAST(&taddr6)) {
nd6log((LOG_INFO, "nd6_ns_input: bad NS target (multicast)\n"));
goto bad;
}
icmp6len -= sizeof(*nd_ns);
nd6_option_init(nd_ns + 1, icmp6len, &ndopts);
if (nd6_options(&ndopts) < 0) {
nd6log((LOG_INFO,
"nd6_ns_input: invalid ND option, ignored\n"));
/* nd6_options have incremented stats */
goto freeit;
}
if (ndopts.nd_opts_src_lladdr) {
lladdr = (char *)(ndopts.nd_opts_src_lladdr + 1);
lladdrlen = ndopts.nd_opts_src_lladdr->nd_opt_len << 3;
}
if (IN6_IS_ADDR_UNSPECIFIED(&ip6->ip6_src) && lladdr) {
nd6log((LOG_INFO, "nd6_ns_input: bad DAD packet "
"(link-layer address option)\n"));
goto bad;
}
/*
* Attaching target link-layer address to the NA?
* (RFC 2461 7.2.4)
*
* NS IP dst is unicast/anycast MUST NOT add
* NS IP dst is solicited-node multicast MUST add
*
* In implementation, we add target link-layer address by default.
* We do not add one in MUST NOT cases.
*/
if (!IN6_IS_ADDR_MULTICAST(&daddr6))
tlladdr = 0;
else
tlladdr = 1;
/*
* Target address (taddr6) must be either:
* (1) Valid unicast/anycast address for my receiving interface,
* (2) Unicast address for which I'm offering proxy service, or
* (3) "tentative" address on which DAD is being performed.
*/
/* (1) and (3) check. */
if (ifp->if_carp)
ifa = (*carp_iamatch6_p)(ifp, &taddr6);
if (ifa == NULL)
ifa = (struct ifaddr *)in6ifa_ifpwithaddr(ifp, &taddr6);
/* (2) check. */
if (ifa == NULL) {
struct rtentry *rt;
struct sockaddr_in6 tsin6;
int need_proxy;
#ifdef RADIX_MPATH
struct route_in6 ro;
#endif
bzero(&tsin6, sizeof tsin6);
tsin6.sin6_len = sizeof(struct sockaddr_in6);
tsin6.sin6_family = AF_INET6;
tsin6.sin6_addr = taddr6;
#ifdef RADIX_MPATH
bzero(&ro, sizeof(ro));
ro.ro_dst = tsin6;
rtalloc_mpath((struct route *)&ro, RTF_ANNOUNCE);
rt = ro.ro_rt;
#else
rt = rtalloc1((struct sockaddr *)&tsin6, 0, 0);
#endif
need_proxy = (rt && (rt->rt_flags & RTF_ANNOUNCE) != 0 &&
rt->rt_gateway->sa_family == AF_LINK);
if (rt)
RTFREE_LOCKED(rt);
if (need_proxy) {
/*
* proxy NDP for single entry
*/
ifa = (struct ifaddr *)in6ifa_ifpforlinklocal(ifp,
IN6_IFF_NOTREADY|IN6_IFF_ANYCAST);
if (ifa) {
proxy = 1;
proxydl = SDL(rt->rt_gateway);
}
}
}
if (ifa == NULL) {
/*
* We've got an NS packet, and we don't have that adddress
* assigned for us. We MUST silently ignore it.
* See RFC2461 7.2.3.
*/
goto freeit;
}
myaddr6 = *IFA_IN6(ifa);
anycast = ((struct in6_ifaddr *)ifa)->ia6_flags & IN6_IFF_ANYCAST;
tentative = ((struct in6_ifaddr *)ifa)->ia6_flags & IN6_IFF_TENTATIVE;
if (((struct in6_ifaddr *)ifa)->ia6_flags & IN6_IFF_DUPLICATED)
goto freeit;
if (lladdr && ((ifp->if_addrlen + 2 + 7) & ~7) != lladdrlen) {
nd6log((LOG_INFO, "nd6_ns_input: lladdrlen mismatch for %s "
"(if %d, NS packet %d)\n",
ip6_sprintf(ip6bufs, &taddr6),
ifp->if_addrlen, lladdrlen - 2));
goto bad;
}
if (IN6_ARE_ADDR_EQUAL(&myaddr6, &saddr6)) {
nd6log((LOG_INFO, "nd6_ns_input: duplicate IP6 address %s\n",
ip6_sprintf(ip6bufs, &saddr6)));
goto freeit;
}
/*
* We have neighbor solicitation packet, with target address equals to
* one of my tentative address.
*
* src addr how to process?
* --- ---
* multicast of course, invalid (rejected in ip6_input)
* unicast somebody is doing address resolution -> ignore
* unspec dup address detection
*
* The processing is defined in RFC 2462.
*/
if (tentative) {
/*
* If source address is unspecified address, it is for
* duplicate address detection.
*
* If not, the packet is for addess resolution;
* silently ignore it.
*/
if (IN6_IS_ADDR_UNSPECIFIED(&saddr6))
nd6_dad_ns_input(ifa);
goto freeit;
}
/*
* If the source address is unspecified address, entries must not
* be created or updated.
* It looks that sender is performing DAD. Output NA toward
* all-node multicast address, to tell the sender that I'm using
* the address.
* S bit ("solicited") must be zero.
*/
if (IN6_IS_ADDR_UNSPECIFIED(&saddr6)) {
struct in6_addr in6_all;
in6_all = in6addr_linklocal_allnodes;
if (in6_setscope(&in6_all, ifp, NULL) != 0)
goto bad;
nd6_na_output(ifp, &in6_all, &taddr6,
((anycast || proxy || !tlladdr) ? 0 : ND_NA_FLAG_OVERRIDE) |
(V_ip6_forwarding ? ND_NA_FLAG_ROUTER : 0),
tlladdr, (struct sockaddr *)proxydl);
goto freeit;
}
nd6_cache_lladdr(ifp, &saddr6, lladdr, lladdrlen,
ND_NEIGHBOR_SOLICIT, 0);
nd6_na_output(ifp, &saddr6, &taddr6,
((anycast || proxy || !tlladdr) ? 0 : ND_NA_FLAG_OVERRIDE) |
(V_ip6_forwarding ? ND_NA_FLAG_ROUTER : 0) | ND_NA_FLAG_SOLICITED,
tlladdr, (struct sockaddr *)proxydl);
freeit:
if (ifa != NULL)
ifa_free(ifa);
m_freem(m);
return;
bad:
nd6log((LOG_ERR, "nd6_ns_input: src=%s\n",
ip6_sprintf(ip6bufs, &saddr6)));
nd6log((LOG_ERR, "nd6_ns_input: dst=%s\n",
ip6_sprintf(ip6bufs, &daddr6)));
nd6log((LOG_ERR, "nd6_ns_input: tgt=%s\n",
ip6_sprintf(ip6bufs, &taddr6)));
ICMP6STAT_INC(icp6s_badns);
if (ifa != NULL)
ifa_free(ifa);
m_freem(m);
}
/*
* Output a Neighbor Solicitation Message. Caller specifies:
* - ICMP6 header source IP6 address
* - ND6 header target IP6 address
* - ND6 header source datalink address
*
* Based on RFC 2461
* Based on RFC 2462 (duplicate address detection)
*
* ln - for source address determination
* dad - duplicate address detection
*/
void
nd6_ns_output(struct ifnet *ifp, const struct in6_addr *daddr6,
const struct in6_addr *taddr6, struct llentry *ln, int dad)
{
struct mbuf *m;
struct ip6_hdr *ip6;
struct nd_neighbor_solicit *nd_ns;
struct in6_addr *src, src_in;
struct ip6_moptions im6o;
int icmp6len;
int maxlen;
caddr_t mac;
struct route_in6 ro;
bzero(&ro, sizeof(ro));
if (IN6_IS_ADDR_MULTICAST(taddr6))
return;
/* estimate the size of message */
maxlen = sizeof(*ip6) + sizeof(*nd_ns);
maxlen += (sizeof(struct nd_opt_hdr) + ifp->if_addrlen + 7) & ~7;
if (max_linkhdr + maxlen >= MCLBYTES) {
#ifdef DIAGNOSTIC
printf("nd6_ns_output: max_linkhdr + maxlen >= MCLBYTES "
"(%d + %d > %d)\n", max_linkhdr, maxlen, MCLBYTES);
#endif
return;
}
MGETHDR(m, M_DONTWAIT, MT_DATA);
if (m && max_linkhdr + maxlen >= MHLEN) {
MCLGET(m, M_DONTWAIT);
if ((m->m_flags & M_EXT) == 0) {
m_free(m);
m = NULL;
}
}
if (m == NULL)
return;
m->m_pkthdr.rcvif = NULL;
if (daddr6 == NULL || IN6_IS_ADDR_MULTICAST(daddr6)) {
m->m_flags |= M_MCAST;
im6o.im6o_multicast_ifp = ifp;
im6o.im6o_multicast_hlim = 255;
im6o.im6o_multicast_loop = 0;
}
icmp6len = sizeof(*nd_ns);
m->m_pkthdr.len = m->m_len = sizeof(*ip6) + icmp6len;
m->m_data += max_linkhdr; /* or MH_ALIGN() equivalent? */
/* fill neighbor solicitation packet */
ip6 = mtod(m, struct ip6_hdr *);
ip6->ip6_flow = 0;
ip6->ip6_vfc &= ~IPV6_VERSION_MASK;
ip6->ip6_vfc |= IPV6_VERSION;
/* ip6->ip6_plen will be set later */
ip6->ip6_nxt = IPPROTO_ICMPV6;
ip6->ip6_hlim = 255;
if (daddr6)
ip6->ip6_dst = *daddr6;
else {
ip6->ip6_dst.s6_addr16[0] = IPV6_ADDR_INT16_MLL;
ip6->ip6_dst.s6_addr16[1] = 0;
ip6->ip6_dst.s6_addr32[1] = 0;
ip6->ip6_dst.s6_addr32[2] = IPV6_ADDR_INT32_ONE;
ip6->ip6_dst.s6_addr32[3] = taddr6->s6_addr32[3];
ip6->ip6_dst.s6_addr8[12] = 0xff;
if (in6_setscope(&ip6->ip6_dst, ifp, NULL) != 0)
goto bad;
}
if (!dad) {
struct ifaddr *ifa;
/*
* RFC2461 7.2.2:
* "If the source address of the packet prompting the
* solicitation is the same as one of the addresses assigned
* to the outgoing interface, that address SHOULD be placed
* in the IP Source Address of the outgoing solicitation.
* Otherwise, any one of the addresses assigned to the
* interface should be used."
*
* We use the source address for the prompting packet
* (saddr6), if:
* - saddr6 is given from the caller (by giving "ln"), and
* - saddr6 belongs to the outgoing interface.
* Otherwise, we perform the source address selection as usual.
*/
struct ip6_hdr *hip6; /* hold ip6 */
struct in6_addr *hsrc = NULL;
if ((ln != NULL) && ln->la_hold) {
/*
* assuming every packet in la_hold has the same IP
* header
*/
hip6 = mtod(ln->la_hold, struct ip6_hdr *);
/* XXX pullup? */
if (sizeof(*hip6) < ln->la_hold->m_len)
hsrc = &hip6->ip6_src;
else
hsrc = NULL;
}
if (hsrc && (ifa = (struct ifaddr *)in6ifa_ifpwithaddr(ifp,
hsrc)) != NULL) {
src = hsrc;
ifa_free(ifa);
} else {
int error;
struct sockaddr_in6 dst_sa;
bzero(&dst_sa, sizeof(dst_sa));
dst_sa.sin6_family = AF_INET6;
dst_sa.sin6_len = sizeof(dst_sa);
dst_sa.sin6_addr = ip6->ip6_dst;
error = in6_selectsrc(&dst_sa, NULL,
NULL, &ro, NULL, NULL, &src_in);
if (error) {
char ip6buf[INET6_ADDRSTRLEN];
nd6log((LOG_DEBUG,
"nd6_ns_output: source can't be "
"determined: dst=%s, error=%d\n",
ip6_sprintf(ip6buf, &dst_sa.sin6_addr),
error));
goto bad;
}
src = &src_in;
}
} else {
/*
* Source address for DAD packet must always be IPv6
* unspecified address. (0::0)
* We actually don't have to 0-clear the address (we did it
* above), but we do so here explicitly to make the intention
* clearer.
*/
bzero(&src_in, sizeof(src_in));
src = &src_in;
}
ip6->ip6_src = *src;
nd_ns = (struct nd_neighbor_solicit *)(ip6 + 1);
nd_ns->nd_ns_type = ND_NEIGHBOR_SOLICIT;
nd_ns->nd_ns_code = 0;
nd_ns->nd_ns_reserved = 0;
nd_ns->nd_ns_target = *taddr6;
in6_clearscope(&nd_ns->nd_ns_target); /* XXX */
/*
* Add source link-layer address option.
*
* spec implementation
* --- ---
* DAD packet MUST NOT do not add the option
* there's no link layer address:
* impossible do not add the option
* there's link layer address:
* Multicast NS MUST add one add the option
* Unicast NS SHOULD add one add the option
*/
if (!dad && (mac = nd6_ifptomac(ifp))) {
int optlen = sizeof(struct nd_opt_hdr) + ifp->if_addrlen;
struct nd_opt_hdr *nd_opt = (struct nd_opt_hdr *)(nd_ns + 1);
/* 8 byte alignments... */
optlen = (optlen + 7) & ~7;
m->m_pkthdr.len += optlen;
m->m_len += optlen;
icmp6len += optlen;
bzero((caddr_t)nd_opt, optlen);
nd_opt->nd_opt_type = ND_OPT_SOURCE_LINKADDR;
nd_opt->nd_opt_len = optlen >> 3;
bcopy(mac, (caddr_t)(nd_opt + 1), ifp->if_addrlen);
}
ip6->ip6_plen = htons((u_short)icmp6len);
nd_ns->nd_ns_cksum = 0;
nd_ns->nd_ns_cksum =
in6_cksum(m, IPPROTO_ICMPV6, sizeof(*ip6), icmp6len);
ip6_output(m, NULL, &ro, dad ? IPV6_UNSPECSRC : 0, &im6o, NULL, NULL);
icmp6_ifstat_inc(ifp, ifs6_out_msg);
icmp6_ifstat_inc(ifp, ifs6_out_neighborsolicit);
ICMP6STAT_INC(icp6s_outhist[ND_NEIGHBOR_SOLICIT]);
if (ro.ro_rt) { /* we don't cache this route. */
RTFREE(ro.ro_rt);
}
return;
bad:
if (ro.ro_rt) {
RTFREE(ro.ro_rt);
}
m_freem(m);
return;
}
/*
* Neighbor advertisement input handling.
*
* Based on RFC 2461
* Based on RFC 2462 (duplicate address detection)
*
* the following items are not implemented yet:
* - proxy advertisement delay rule (RFC2461 7.2.8, last paragraph, SHOULD)
* - anycast advertisement delay rule (RFC2461 7.2.7, SHOULD)
*/
void
nd6_na_input(struct mbuf *m, int off, int icmp6len)
{
struct ifnet *ifp = m->m_pkthdr.rcvif;
struct ip6_hdr *ip6 = mtod(m, struct ip6_hdr *);
struct nd_neighbor_advert *nd_na;
struct in6_addr daddr6 = ip6->ip6_dst;
struct in6_addr taddr6;
int flags;
int is_router;
int is_solicited;
int is_override;
char *lladdr = NULL;
int lladdrlen = 0;
int checklink = 0;
struct ifaddr *ifa;
struct llentry *ln = NULL;
union nd_opts ndopts;
struct mbuf *chain = NULL;
struct sockaddr_in6 sin6;
char ip6bufs[INET6_ADDRSTRLEN], ip6bufd[INET6_ADDRSTRLEN];
if (ip6->ip6_hlim != 255) {
nd6log((LOG_ERR,
"nd6_na_input: invalid hlim (%d) from %s to %s on %s\n",
ip6->ip6_hlim, ip6_sprintf(ip6bufs, &ip6->ip6_src),
ip6_sprintf(ip6bufd, &ip6->ip6_dst), if_name(ifp)));
goto bad;
}
#ifndef PULLDOWN_TEST
IP6_EXTHDR_CHECK(m, off, icmp6len,);
nd_na = (struct nd_neighbor_advert *)((caddr_t)ip6 + off);
#else
IP6_EXTHDR_GET(nd_na, struct nd_neighbor_advert *, m, off, icmp6len);
if (nd_na == NULL) {
ICMP6STAT_INC(icp6s_tooshort);
return;
}
#endif
flags = nd_na->nd_na_flags_reserved;
is_router = ((flags & ND_NA_FLAG_ROUTER) != 0);
is_solicited = ((flags & ND_NA_FLAG_SOLICITED) != 0);
is_override = ((flags & ND_NA_FLAG_OVERRIDE) != 0);
taddr6 = nd_na->nd_na_target;
if (in6_setscope(&taddr6, ifp, NULL))
goto bad; /* XXX: impossible */
if (IN6_IS_ADDR_MULTICAST(&taddr6)) {
nd6log((LOG_ERR,
"nd6_na_input: invalid target address %s\n",
ip6_sprintf(ip6bufs, &taddr6)));
goto bad;
}
if (IN6_IS_ADDR_MULTICAST(&daddr6))
if (is_solicited) {
nd6log((LOG_ERR,
"nd6_na_input: a solicited adv is multicasted\n"));
goto bad;
}
icmp6len -= sizeof(*nd_na);
nd6_option_init(nd_na + 1, icmp6len, &ndopts);
if (nd6_options(&ndopts) < 0) {
nd6log((LOG_INFO,
"nd6_na_input: invalid ND option, ignored\n"));
/* nd6_options have incremented stats */
goto freeit;
}
if (ndopts.nd_opts_tgt_lladdr) {
lladdr = (char *)(ndopts.nd_opts_tgt_lladdr + 1);
lladdrlen = ndopts.nd_opts_tgt_lladdr->nd_opt_len << 3;
}
ifa = (struct ifaddr *)in6ifa_ifpwithaddr(ifp, &taddr6);
/*
* Target address matches one of my interface address.
*
* If my address is tentative, this means that there's somebody
* already using the same address as mine. This indicates DAD failure.
* This is defined in RFC 2462.
*
* Otherwise, process as defined in RFC 2461.
*/
if (ifa
&& (((struct in6_ifaddr *)ifa)->ia6_flags & IN6_IFF_TENTATIVE)) {
ifa_free(ifa);
nd6_dad_na_input(ifa);
goto freeit;
}
/* Just for safety, maybe unnecessary. */
if (ifa) {
ifa_free(ifa);
log(LOG_ERR,
"nd6_na_input: duplicate IP6 address %s\n",
ip6_sprintf(ip6bufs, &taddr6));
goto freeit;
}
if (lladdr && ((ifp->if_addrlen + 2 + 7) & ~7) != lladdrlen) {
nd6log((LOG_INFO, "nd6_na_input: lladdrlen mismatch for %s "
"(if %d, NA packet %d)\n", ip6_sprintf(ip6bufs, &taddr6),
ifp->if_addrlen, lladdrlen - 2));
goto bad;
}
/*
* If no neighbor cache entry is found, NA SHOULD silently be
* discarded.
*/
IF_AFDATA_LOCK(ifp);
ln = nd6_lookup(&taddr6, LLE_EXCLUSIVE, ifp);
IF_AFDATA_UNLOCK(ifp);
if (ln == NULL) {
goto freeit;
}
if (ln->ln_state == ND6_LLINFO_INCOMPLETE) {
/*
* If the link-layer has address, and no lladdr option came,
* discard the packet.
*/
if (ifp->if_addrlen && lladdr == NULL) {
goto freeit;
}
/*
* Record link-layer address, and update the state.
*/
bcopy(lladdr, &ln->ll_addr, ifp->if_addrlen);
ln->la_flags |= LLE_VALID;
if (is_solicited) {
ln->ln_state = ND6_LLINFO_REACHABLE;
ln->ln_byhint = 0;
if (!ND6_LLINFO_PERMANENT(ln)) {
nd6_llinfo_settimer_locked(ln,
(long)ND_IFINFO(ln->lle_tbl->llt_ifp)->reachable * hz);
}
} else {
ln->ln_state = ND6_LLINFO_STALE;
nd6_llinfo_settimer_locked(ln, (long)V_nd6_gctimer * hz);
}
if ((ln->ln_router = is_router) != 0) {
/*
* This means a router's state has changed from
* non-reachable to probably reachable, and might
* affect the status of associated prefixes..
*/
checklink = 1;
}
} else {
int llchange;
/*
* Check if the link-layer address has changed or not.
*/
if (lladdr == NULL)
llchange = 0;
else {
if (ln->la_flags & LLE_VALID) {
if (bcmp(lladdr, &ln->ll_addr, ifp->if_addrlen))
llchange = 1;
else
llchange = 0;
} else
llchange = 1;
}
/*
* This is VERY complex. Look at it with care.
*
* override solicit lladdr llchange action
* (L: record lladdr)
*
* 0 0 n -- (2c)
* 0 0 y n (2b) L
* 0 0 y y (1) REACHABLE->STALE
* 0 1 n -- (2c) *->REACHABLE
* 0 1 y n (2b) L *->REACHABLE
* 0 1 y y (1) REACHABLE->STALE
* 1 0 n -- (2a)
* 1 0 y n (2a) L
* 1 0 y y (2a) L *->STALE
* 1 1 n -- (2a) *->REACHABLE
* 1 1 y n (2a) L *->REACHABLE
* 1 1 y y (2a) L *->REACHABLE
*/
if (!is_override && (lladdr != NULL && llchange)) { /* (1) */
/*
* If state is REACHABLE, make it STALE.
* no other updates should be done.
*/
if (ln->ln_state == ND6_LLINFO_REACHABLE) {
ln->ln_state = ND6_LLINFO_STALE;
nd6_llinfo_settimer_locked(ln, (long)V_nd6_gctimer * hz);
}
goto freeit;
} else if (is_override /* (2a) */
|| (!is_override && (lladdr != NULL && !llchange)) /* (2b) */
|| lladdr == NULL) { /* (2c) */
/*
* Update link-local address, if any.
*/
if (lladdr != NULL) {
bcopy(lladdr, &ln->ll_addr, ifp->if_addrlen);
ln->la_flags |= LLE_VALID;
}
/*
* If solicited, make the state REACHABLE.
* If not solicited and the link-layer address was
* changed, make it STALE.
*/
if (is_solicited) {
ln->ln_state = ND6_LLINFO_REACHABLE;
ln->ln_byhint = 0;
if (!ND6_LLINFO_PERMANENT(ln)) {
nd6_llinfo_settimer_locked(ln,
(long)ND_IFINFO(ifp)->reachable * hz);
}
} else {
if (lladdr != NULL && llchange) {
ln->ln_state = ND6_LLINFO_STALE;
nd6_llinfo_settimer_locked(ln,
(long)V_nd6_gctimer * hz);
}
}
}
if (ln->ln_router && !is_router) {
/*
* The peer dropped the router flag.
* Remove the sender from the Default Router List and
* update the Destination Cache entries.
*/
struct nd_defrouter *dr;
struct in6_addr *in6;
in6 = &L3_ADDR_SIN6(ln)->sin6_addr;
/*
* Lock to protect the default router list.
* XXX: this might be unnecessary, since this function
* is only called under the network software interrupt
* context. However, we keep it just for safety.
*/
dr = defrouter_lookup(in6, ln->lle_tbl->llt_ifp);
if (dr)
defrtrlist_del(dr);
else if (!V_ip6_forwarding) {
/*
* Even if the neighbor is not in the default
* router list, the neighbor may be used
* as a next hop for some destinations
* (e.g. redirect case). So we must
* call rt6_flush explicitly.
*/
rt6_flush(&ip6->ip6_src, ifp);
}
}
ln->ln_router = is_router;
}
/* XXX - QL
* Does this matter?
* rt->rt_flags &= ~RTF_REJECT;
*/
ln->la_asked = 0;
if (ln->la_hold) {
struct mbuf *m_hold, *m_hold_next;
/*
* reset the la_hold in advance, to explicitly
* prevent a la_hold lookup in nd6_output()
* (wouldn't happen, though...)
*/
for (m_hold = ln->la_hold, ln->la_hold = NULL;
m_hold; m_hold = m_hold_next) {
m_hold_next = m_hold->m_nextpkt;
m_hold->m_nextpkt = NULL;
/*
* we assume ifp is not a loopback here, so just set
* the 2nd argument as the 1st one.
*/
nd6_output_lle(ifp, ifp, m_hold, L3_ADDR_SIN6(ln), NULL, ln, &chain);
}
}
freeit:
if (ln != NULL) {
if (chain)
memcpy(&sin6, L3_ADDR_SIN6(ln), sizeof(sin6));
LLE_WUNLOCK(ln);
if (chain)
nd6_output_flush(ifp, ifp, chain, &sin6, NULL);
}
if (checklink)
pfxlist_onlink_check();
m_freem(m);
return;
bad:
if (ln != NULL)
LLE_WUNLOCK(ln);
ICMP6STAT_INC(icp6s_badna);
m_freem(m);
}
/*
* Neighbor advertisement output handling.
*
* Based on RFC 2461
*
* the following items are not implemented yet:
* - proxy advertisement delay rule (RFC2461 7.2.8, last paragraph, SHOULD)
* - anycast advertisement delay rule (RFC2461 7.2.7, SHOULD)
*
* tlladdr - 1 if include target link-layer address
* sdl0 - sockaddr_dl (= proxy NA) or NULL
*/
void
nd6_na_output(struct ifnet *ifp, const struct in6_addr *daddr6_0,
const struct in6_addr *taddr6, u_long flags, int tlladdr,
struct sockaddr *sdl0)
{
struct mbuf *m;
struct ip6_hdr *ip6;
struct nd_neighbor_advert *nd_na;
struct ip6_moptions im6o;
struct in6_addr src, daddr6;
struct sockaddr_in6 dst_sa;
int icmp6len, maxlen, error;
2002-03-19 23:26:37 +00:00
caddr_t mac = NULL;
struct route_in6 ro;
bzero(&ro, sizeof(ro));
daddr6 = *daddr6_0; /* make a local copy for modification */
/* estimate the size of message */
maxlen = sizeof(*ip6) + sizeof(*nd_na);
maxlen += (sizeof(struct nd_opt_hdr) + ifp->if_addrlen + 7) & ~7;
if (max_linkhdr + maxlen >= MCLBYTES) {
#ifdef DIAGNOSTIC
printf("nd6_na_output: max_linkhdr + maxlen >= MCLBYTES "
"(%d + %d > %d)\n", max_linkhdr, maxlen, MCLBYTES);
#endif
return;
}
MGETHDR(m, M_DONTWAIT, MT_DATA);
if (m && max_linkhdr + maxlen >= MHLEN) {
MCLGET(m, M_DONTWAIT);
if ((m->m_flags & M_EXT) == 0) {
m_free(m);
m = NULL;
}
}
if (m == NULL)
return;
m->m_pkthdr.rcvif = NULL;
if (IN6_IS_ADDR_MULTICAST(&daddr6)) {
m->m_flags |= M_MCAST;
im6o.im6o_multicast_ifp = ifp;
im6o.im6o_multicast_hlim = 255;
im6o.im6o_multicast_loop = 0;
}
icmp6len = sizeof(*nd_na);
m->m_pkthdr.len = m->m_len = sizeof(struct ip6_hdr) + icmp6len;
m->m_data += max_linkhdr; /* or MH_ALIGN() equivalent? */
/* fill neighbor advertisement packet */
ip6 = mtod(m, struct ip6_hdr *);
ip6->ip6_flow = 0;
ip6->ip6_vfc &= ~IPV6_VERSION_MASK;
ip6->ip6_vfc |= IPV6_VERSION;
ip6->ip6_nxt = IPPROTO_ICMPV6;
ip6->ip6_hlim = 255;
if (IN6_IS_ADDR_UNSPECIFIED(&daddr6)) {
/* reply to DAD */
daddr6.s6_addr16[0] = IPV6_ADDR_INT16_MLL;
daddr6.s6_addr16[1] = 0;
daddr6.s6_addr32[1] = 0;
daddr6.s6_addr32[2] = 0;
daddr6.s6_addr32[3] = IPV6_ADDR_INT32_ONE;
if (in6_setscope(&daddr6, ifp, NULL))
goto bad;
flags &= ~ND_NA_FLAG_SOLICITED;
}
ip6->ip6_dst = daddr6;
bzero(&dst_sa, sizeof(struct sockaddr_in6));
dst_sa.sin6_family = AF_INET6;
dst_sa.sin6_len = sizeof(struct sockaddr_in6);
dst_sa.sin6_addr = daddr6;
/*
* Select a source whose scope is the same as that of the dest.
*/
bcopy(&dst_sa, &ro.ro_dst, sizeof(dst_sa));
error = in6_selectsrc(&dst_sa, NULL, NULL, &ro, NULL, NULL, &src);
if (error) {
char ip6buf[INET6_ADDRSTRLEN];
nd6log((LOG_DEBUG, "nd6_na_output: source can't be "
"determined: dst=%s, error=%d\n",
ip6_sprintf(ip6buf, &dst_sa.sin6_addr), error));
goto bad;
}
ip6->ip6_src = src;
nd_na = (struct nd_neighbor_advert *)(ip6 + 1);
nd_na->nd_na_type = ND_NEIGHBOR_ADVERT;
nd_na->nd_na_code = 0;
nd_na->nd_na_target = *taddr6;
in6_clearscope(&nd_na->nd_na_target); /* XXX */
/*
* "tlladdr" indicates NS's condition for adding tlladdr or not.
* see nd6_ns_input() for details.
* Basically, if NS packet is sent to unicast/anycast addr,
* target lladdr option SHOULD NOT be included.
*/
if (tlladdr) {
/*
* sdl0 != NULL indicates proxy NA. If we do proxy, use
* lladdr in sdl0. If we are not proxying (sending NA for
* my address) use lladdr configured for the interface.
*/
if (sdl0 == NULL) {
if (ifp->if_carp)
mac = (*carp_macmatch6_p)(ifp, m, taddr6);
if (mac == NULL)
mac = nd6_ifptomac(ifp);
} else if (sdl0->sa_family == AF_LINK) {
struct sockaddr_dl *sdl;
sdl = (struct sockaddr_dl *)sdl0;
if (sdl->sdl_alen == ifp->if_addrlen)
mac = LLADDR(sdl);
}
}
if (tlladdr && mac) {
int optlen = sizeof(struct nd_opt_hdr) + ifp->if_addrlen;
struct nd_opt_hdr *nd_opt = (struct nd_opt_hdr *)(nd_na + 1);
/* roundup to 8 bytes alignment! */
optlen = (optlen + 7) & ~7;
m->m_pkthdr.len += optlen;
m->m_len += optlen;
icmp6len += optlen;
bzero((caddr_t)nd_opt, optlen);
nd_opt->nd_opt_type = ND_OPT_TARGET_LINKADDR;
nd_opt->nd_opt_len = optlen >> 3;
bcopy(mac, (caddr_t)(nd_opt + 1), ifp->if_addrlen);
} else
flags &= ~ND_NA_FLAG_OVERRIDE;
ip6->ip6_plen = htons((u_short)icmp6len);
nd_na->nd_na_flags_reserved = flags;
nd_na->nd_na_cksum = 0;
nd_na->nd_na_cksum =
in6_cksum(m, IPPROTO_ICMPV6, sizeof(struct ip6_hdr), icmp6len);
ip6_output(m, NULL, &ro, 0, &im6o, NULL, NULL);
icmp6_ifstat_inc(ifp, ifs6_out_msg);
icmp6_ifstat_inc(ifp, ifs6_out_neighboradvert);
ICMP6STAT_INC(icp6s_outhist[ND_NEIGHBOR_ADVERT]);
if (ro.ro_rt) { /* we don't cache this route. */
RTFREE(ro.ro_rt);
}
return;
bad:
if (ro.ro_rt) {
RTFREE(ro.ro_rt);
}
m_freem(m);
return;
}
caddr_t
nd6_ifptomac(struct ifnet *ifp)
{
switch (ifp->if_type) {
case IFT_ARCNET:
case IFT_ETHER:
case IFT_FDDI:
case IFT_IEEE1394:
#ifdef IFT_L2VLAN
case IFT_L2VLAN:
#endif
#ifdef IFT_IEEE80211
case IFT_IEEE80211:
#endif
#ifdef IFT_CARP
case IFT_CARP:
#endif
case IFT_BRIDGE:
2003-09-14 02:32:31 +00:00
case IFT_ISO88025:
return IF_LLADDR(ifp);
default:
return NULL;
}
}
struct dadq {
TAILQ_ENTRY(dadq) dad_list;
struct ifaddr *dad_ifa;
int dad_count; /* max NS to send */
int dad_ns_tcount; /* # of trials to send NS */
int dad_ns_ocount; /* NS sent so far */
int dad_ns_icount;
int dad_na_icount;
struct callout dad_timer_ch;
Change the curvnet variable from a global const struct vnet *, previously always pointing to the default vnet context, to a dynamically changing thread-local one. The currvnet context should be set on entry to networking code via CURVNET_SET() macros, and reverted to previous state via CURVNET_RESTORE(). Recursions on curvnet are permitted, though strongly discuouraged. This change should have no functional impact on nooptions VIMAGE kernel builds, where CURVNET_* macros expand to whitespace. The curthread->td_vnet (aka curvnet) variable's purpose is to be an indicator of the vnet context in which the current network-related operation takes place, in case we cannot deduce the current vnet context from any other source, such as by looking at mbuf's m->m_pkthdr.rcvif->if_vnet, sockets's so->so_vnet etc. Moreover, so far curvnet has turned out to be an invaluable consistency checking aid: it helps to catch cases when sockets, ifnets or any other vnet-aware structures may have leaked from one vnet to another. The exact placement of the CURVNET_SET() / CURVNET_RESTORE() macros was a result of an empirical iterative process, whith an aim to reduce recursions on CURVNET_SET() to a minimum, while still reducing the scope of CURVNET_SET() to networking only operations - the alternative would be calling CURVNET_SET() on each system call entry. In general, curvnet has to be set in three typicall cases: when processing socket-related requests from userspace or from within the kernel; when processing inbound traffic flowing from device drivers to upper layers of the networking stack, and when executing timer-driven networking functions. This change also introduces a DDB subcommand to show the list of all vnet instances. Approved by: julian (mentor)
2009-05-05 10:56:12 +00:00
struct vnet *dad_vnet;
};
Build on Jeff Roberson's linker-set based dynamic per-CPU allocator (DPCPU), as suggested by Peter Wemm, and implement a new per-virtual network stack memory allocator. Modify vnet to use the allocator instead of monolithic global container structures (vinet, ...). This change solves many binary compatibility problems associated with VIMAGE, and restores ELF symbols for virtualized global variables. Each virtualized global variable exists as a "reference copy", and also once per virtual network stack. Virtualized global variables are tagged at compile-time, placing the in a special linker set, which is loaded into a contiguous region of kernel memory. Virtualized global variables in the base kernel are linked as normal, but those in modules are copied and relocated to a reserved portion of the kernel's vnet region with the help of a the kernel linker. Virtualized global variables exist in per-vnet memory set up when the network stack instance is created, and are initialized statically from the reference copy. Run-time access occurs via an accessor macro, which converts from the current vnet and requested symbol to a per-vnet address. When "options VIMAGE" is not compiled into the kernel, normal global ELF symbols will be used instead and indirection is avoided. This change restores static initialization for network stack global variables, restores support for non-global symbols and types, eliminates the need for many subsystem constructors, eliminates large per-subsystem structures that caused many binary compatibility issues both for monitoring applications (netstat) and kernel modules, removes the per-function INIT_VNET_*() macros throughout the stack, eliminates the need for vnet_symmap ksym(2) munging, and eliminates duplicate definitions of virtualized globals under VIMAGE_GLOBALS. Bump __FreeBSD_version and update UPDATING. Portions submitted by: bz Reviewed by: bz, zec Discussed with: gnn, jamie, jeff, jhb, julian, sam Suggested by: peter Approved by: re (kensmith)
2009-07-14 22:48:30 +00:00
static VNET_DEFINE(TAILQ_HEAD(, dadq), dadq);
VNET_DEFINE(int, dad_init) = 0;
#define V_dadq VNET(dadq)
#define V_dad_init VNET(dad_init)
static struct dadq *
nd6_dad_find(struct ifaddr *ifa)
{
struct dadq *dp;
for (dp = V_dadq.tqh_first; dp; dp = dp->dad_list.tqe_next) {
if (dp->dad_ifa == ifa)
return dp;
}
return NULL;
}
static void
nd6_dad_starttimer(struct dadq *dp, int ticks)
{
callout_reset(&dp->dad_timer_ch, ticks,
Change the curvnet variable from a global const struct vnet *, previously always pointing to the default vnet context, to a dynamically changing thread-local one. The currvnet context should be set on entry to networking code via CURVNET_SET() macros, and reverted to previous state via CURVNET_RESTORE(). Recursions on curvnet are permitted, though strongly discuouraged. This change should have no functional impact on nooptions VIMAGE kernel builds, where CURVNET_* macros expand to whitespace. The curthread->td_vnet (aka curvnet) variable's purpose is to be an indicator of the vnet context in which the current network-related operation takes place, in case we cannot deduce the current vnet context from any other source, such as by looking at mbuf's m->m_pkthdr.rcvif->if_vnet, sockets's so->so_vnet etc. Moreover, so far curvnet has turned out to be an invaluable consistency checking aid: it helps to catch cases when sockets, ifnets or any other vnet-aware structures may have leaked from one vnet to another. The exact placement of the CURVNET_SET() / CURVNET_RESTORE() macros was a result of an empirical iterative process, whith an aim to reduce recursions on CURVNET_SET() to a minimum, while still reducing the scope of CURVNET_SET() to networking only operations - the alternative would be calling CURVNET_SET() on each system call entry. In general, curvnet has to be set in three typicall cases: when processing socket-related requests from userspace or from within the kernel; when processing inbound traffic flowing from device drivers to upper layers of the networking stack, and when executing timer-driven networking functions. This change also introduces a DDB subcommand to show the list of all vnet instances. Approved by: julian (mentor)
2009-05-05 10:56:12 +00:00
(void (*)(void *))nd6_dad_timer, (void *)dp);
}
static void
nd6_dad_stoptimer(struct dadq *dp)
{
callout_stop(&dp->dad_timer_ch);
}
/*
* Start Duplicate Address Detection (DAD) for specified interface address.
*/
void
nd6_dad_start(struct ifaddr *ifa, int delay)
{
struct in6_ifaddr *ia = (struct in6_ifaddr *)ifa;
struct dadq *dp;
char ip6buf[INET6_ADDRSTRLEN];
if (!V_dad_init) {
TAILQ_INIT(&V_dadq);
V_dad_init++;
}
/*
* If we don't need DAD, don't do it.
* There are several cases:
* - DAD is disabled (ip6_dad_count == 0)
* - the interface address is anycast
*/
if (!(ia->ia6_flags & IN6_IFF_TENTATIVE)) {
log(LOG_DEBUG,
"nd6_dad_start: called with non-tentative address "
"%s(%s)\n",
ip6_sprintf(ip6buf, &ia->ia_addr.sin6_addr),
ifa->ifa_ifp ? if_name(ifa->ifa_ifp) : "???");
return;
}
if (ia->ia6_flags & IN6_IFF_ANYCAST) {
ia->ia6_flags &= ~IN6_IFF_TENTATIVE;
return;
}
if (!V_ip6_dad_count) {
ia->ia6_flags &= ~IN6_IFF_TENTATIVE;
return;
}
if (ifa->ifa_ifp == NULL)
panic("nd6_dad_start: ifa->ifa_ifp == NULL");
if (!(ifa->ifa_ifp->if_flags & IFF_UP)) {
return;
}
if (ND_IFINFO(ifa->ifa_ifp)->flags & ND6_IFF_IFDISABLED)
return;
if (nd6_dad_find(ifa) != NULL) {
/* DAD already in progress */
return;
}
dp = malloc(sizeof(*dp), M_IP6NDP, M_NOWAIT);
if (dp == NULL) {
log(LOG_ERR, "nd6_dad_start: memory allocation failed for "
"%s(%s)\n",
ip6_sprintf(ip6buf, &ia->ia_addr.sin6_addr),
ifa->ifa_ifp ? if_name(ifa->ifa_ifp) : "???");
return;
}
bzero(dp, sizeof(*dp));
callout_init(&dp->dad_timer_ch, 0);
Change the curvnet variable from a global const struct vnet *, previously always pointing to the default vnet context, to a dynamically changing thread-local one. The currvnet context should be set on entry to networking code via CURVNET_SET() macros, and reverted to previous state via CURVNET_RESTORE(). Recursions on curvnet are permitted, though strongly discuouraged. This change should have no functional impact on nooptions VIMAGE kernel builds, where CURVNET_* macros expand to whitespace. The curthread->td_vnet (aka curvnet) variable's purpose is to be an indicator of the vnet context in which the current network-related operation takes place, in case we cannot deduce the current vnet context from any other source, such as by looking at mbuf's m->m_pkthdr.rcvif->if_vnet, sockets's so->so_vnet etc. Moreover, so far curvnet has turned out to be an invaluable consistency checking aid: it helps to catch cases when sockets, ifnets or any other vnet-aware structures may have leaked from one vnet to another. The exact placement of the CURVNET_SET() / CURVNET_RESTORE() macros was a result of an empirical iterative process, whith an aim to reduce recursions on CURVNET_SET() to a minimum, while still reducing the scope of CURVNET_SET() to networking only operations - the alternative would be calling CURVNET_SET() on each system call entry. In general, curvnet has to be set in three typicall cases: when processing socket-related requests from userspace or from within the kernel; when processing inbound traffic flowing from device drivers to upper layers of the networking stack, and when executing timer-driven networking functions. This change also introduces a DDB subcommand to show the list of all vnet instances. Approved by: julian (mentor)
2009-05-05 10:56:12 +00:00
#ifdef VIMAGE
dp->dad_vnet = curvnet;
#endif
2008-08-25 06:09:32 +00:00
TAILQ_INSERT_TAIL(&V_dadq, (struct dadq *)dp, dad_list);
nd6log((LOG_DEBUG, "%s: starting DAD for %s\n", if_name(ifa->ifa_ifp),
ip6_sprintf(ip6buf, &ia->ia_addr.sin6_addr)));
/*
* Send NS packet for DAD, ip6_dad_count times.
* Note that we must delay the first transmission, if this is the
* first packet to be sent from the interface after interface
* (re)initialization.
*/
dp->dad_ifa = ifa;
ifa_ref(ifa); /* just for safety */
dp->dad_count = V_ip6_dad_count;
dp->dad_ns_icount = dp->dad_na_icount = 0;
dp->dad_ns_ocount = dp->dad_ns_tcount = 0;
if (delay == 0) {
nd6_dad_ns_output(dp, ifa);
nd6_dad_starttimer(dp,
(long)ND_IFINFO(ifa->ifa_ifp)->retrans * hz / 1000);
} else {
nd6_dad_starttimer(dp, delay);
}
}
/*
* terminate DAD unconditionally. used for address removals.
*/
void
nd6_dad_stop(struct ifaddr *ifa)
{
struct dadq *dp;
if (!V_dad_init)
return;
dp = nd6_dad_find(ifa);
if (!dp) {
/* DAD wasn't started yet */
return;
}
nd6_dad_stoptimer(dp);
TAILQ_REMOVE(&V_dadq, (struct dadq *)dp, dad_list);
free(dp, M_IP6NDP);
dp = NULL;
ifa_free(ifa);
}
static void
Change the curvnet variable from a global const struct vnet *, previously always pointing to the default vnet context, to a dynamically changing thread-local one. The currvnet context should be set on entry to networking code via CURVNET_SET() macros, and reverted to previous state via CURVNET_RESTORE(). Recursions on curvnet are permitted, though strongly discuouraged. This change should have no functional impact on nooptions VIMAGE kernel builds, where CURVNET_* macros expand to whitespace. The curthread->td_vnet (aka curvnet) variable's purpose is to be an indicator of the vnet context in which the current network-related operation takes place, in case we cannot deduce the current vnet context from any other source, such as by looking at mbuf's m->m_pkthdr.rcvif->if_vnet, sockets's so->so_vnet etc. Moreover, so far curvnet has turned out to be an invaluable consistency checking aid: it helps to catch cases when sockets, ifnets or any other vnet-aware structures may have leaked from one vnet to another. The exact placement of the CURVNET_SET() / CURVNET_RESTORE() macros was a result of an empirical iterative process, whith an aim to reduce recursions on CURVNET_SET() to a minimum, while still reducing the scope of CURVNET_SET() to networking only operations - the alternative would be calling CURVNET_SET() on each system call entry. In general, curvnet has to be set in three typicall cases: when processing socket-related requests from userspace or from within the kernel; when processing inbound traffic flowing from device drivers to upper layers of the networking stack, and when executing timer-driven networking functions. This change also introduces a DDB subcommand to show the list of all vnet instances. Approved by: julian (mentor)
2009-05-05 10:56:12 +00:00
nd6_dad_timer(struct dadq *dp)
{
CURVNET_SET(dp->dad_vnet);
int s;
Change the curvnet variable from a global const struct vnet *, previously always pointing to the default vnet context, to a dynamically changing thread-local one. The currvnet context should be set on entry to networking code via CURVNET_SET() macros, and reverted to previous state via CURVNET_RESTORE(). Recursions on curvnet are permitted, though strongly discuouraged. This change should have no functional impact on nooptions VIMAGE kernel builds, where CURVNET_* macros expand to whitespace. The curthread->td_vnet (aka curvnet) variable's purpose is to be an indicator of the vnet context in which the current network-related operation takes place, in case we cannot deduce the current vnet context from any other source, such as by looking at mbuf's m->m_pkthdr.rcvif->if_vnet, sockets's so->so_vnet etc. Moreover, so far curvnet has turned out to be an invaluable consistency checking aid: it helps to catch cases when sockets, ifnets or any other vnet-aware structures may have leaked from one vnet to another. The exact placement of the CURVNET_SET() / CURVNET_RESTORE() macros was a result of an empirical iterative process, whith an aim to reduce recursions on CURVNET_SET() to a minimum, while still reducing the scope of CURVNET_SET() to networking only operations - the alternative would be calling CURVNET_SET() on each system call entry. In general, curvnet has to be set in three typicall cases: when processing socket-related requests from userspace or from within the kernel; when processing inbound traffic flowing from device drivers to upper layers of the networking stack, and when executing timer-driven networking functions. This change also introduces a DDB subcommand to show the list of all vnet instances. Approved by: julian (mentor)
2009-05-05 10:56:12 +00:00
struct ifaddr *ifa = dp->dad_ifa;
struct in6_ifaddr *ia = (struct in6_ifaddr *)ifa;
char ip6buf[INET6_ADDRSTRLEN];
s = splnet(); /* XXX */
/* Sanity check */
if (ia == NULL) {
log(LOG_ERR, "nd6_dad_timer: called with null parameter\n");
goto done;
}
if (ia->ia6_flags & IN6_IFF_DUPLICATED) {
log(LOG_ERR, "nd6_dad_timer: called with duplicated address "
"%s(%s)\n",
ip6_sprintf(ip6buf, &ia->ia_addr.sin6_addr),
ifa->ifa_ifp ? if_name(ifa->ifa_ifp) : "???");
goto done;
}
if ((ia->ia6_flags & IN6_IFF_TENTATIVE) == 0) {
log(LOG_ERR, "nd6_dad_timer: called with non-tentative address "
"%s(%s)\n",
ip6_sprintf(ip6buf, &ia->ia_addr.sin6_addr),
ifa->ifa_ifp ? if_name(ifa->ifa_ifp) : "???");
goto done;
}
/* timeouted with IFF_{RUNNING,UP} check */
if (dp->dad_ns_tcount > V_dad_maxtry) {
nd6log((LOG_INFO, "%s: could not run DAD, driver problem?\n",
if_name(ifa->ifa_ifp)));
TAILQ_REMOVE(&V_dadq, (struct dadq *)dp, dad_list);
free(dp, M_IP6NDP);
dp = NULL;
ifa_free(ifa);
goto done;
}
/* Need more checks? */
if (dp->dad_ns_ocount < dp->dad_count) {
/*
* We have more NS to go. Send NS packet for DAD.
*/
nd6_dad_ns_output(dp, ifa);
nd6_dad_starttimer(dp,
(long)ND_IFINFO(ifa->ifa_ifp)->retrans * hz / 1000);
} else {
/*
* We have transmitted sufficient number of DAD packets.
* See what we've got.
*/
int duplicate;
duplicate = 0;
if (dp->dad_na_icount) {
/*
* the check is in nd6_dad_na_input(),
* but just in case
*/
duplicate++;
}
if (dp->dad_ns_icount) {
/* We've seen NS, means DAD has failed. */
duplicate++;
}
if (duplicate) {
/* (*dp) will be freed in nd6_dad_duplicated() */
dp = NULL;
nd6_dad_duplicated(ifa);
} else {
/*
* We are done with DAD. No NA came, no NS came.
* No duplicate address found.
*/
ia->ia6_flags &= ~IN6_IFF_TENTATIVE;
nd6log((LOG_DEBUG,
"%s: DAD complete for %s - no duplicates found\n",
if_name(ifa->ifa_ifp),
ip6_sprintf(ip6buf, &ia->ia_addr.sin6_addr)));
TAILQ_REMOVE(&V_dadq, (struct dadq *)dp, dad_list);
free(dp, M_IP6NDP);
dp = NULL;
ifa_free(ifa);
}
}
done:
splx(s);
CURVNET_RESTORE();
}
void
nd6_dad_duplicated(struct ifaddr *ifa)
{
struct in6_ifaddr *ia = (struct in6_ifaddr *)ifa;
struct ifnet *ifp;
struct dadq *dp;
char ip6buf[INET6_ADDRSTRLEN];
dp = nd6_dad_find(ifa);
if (dp == NULL) {
log(LOG_ERR, "nd6_dad_duplicated: DAD structure not found\n");
return;
}
log(LOG_ERR, "%s: DAD detected duplicate IPv6 address %s: "
"NS in/out=%d/%d, NA in=%d\n",
if_name(ifa->ifa_ifp), ip6_sprintf(ip6buf, &ia->ia_addr.sin6_addr),
dp->dad_ns_icount, dp->dad_ns_ocount, dp->dad_na_icount);
ia->ia6_flags &= ~IN6_IFF_TENTATIVE;
ia->ia6_flags |= IN6_IFF_DUPLICATED;
/* We are done with DAD, with duplicate address found. (failure) */
nd6_dad_stoptimer(dp);
ifp = ifa->ifa_ifp;
log(LOG_ERR, "%s: DAD complete for %s - duplicate found\n",
if_name(ifp), ip6_sprintf(ip6buf, &ia->ia_addr.sin6_addr));
log(LOG_ERR, "%s: manual intervention required\n",
if_name(ifp));
/*
* If the address is a link-local address formed from an interface
* identifier based on the hardware address which is supposed to be
* uniquely assigned (e.g., EUI-64 for an Ethernet interface), IP
* operation on the interface SHOULD be disabled.
* [RFC 4862, Section 5.4.5]
*/
if (IN6_IS_ADDR_LINKLOCAL(&ia->ia_addr.sin6_addr)) {
struct in6_addr in6;
/*
* To avoid over-reaction, we only apply this logic when we are
* very sure that hardware addresses are supposed to be unique.
*/
switch (ifp->if_type) {
case IFT_ETHER:
case IFT_FDDI:
case IFT_ATM:
case IFT_IEEE1394:
#ifdef IFT_IEEE80211
case IFT_IEEE80211:
#endif
in6 = ia->ia_addr.sin6_addr;
if (in6_get_hw_ifid(ifp, &in6) == 0 &&
IN6_ARE_ADDR_EQUAL(&ia->ia_addr.sin6_addr, &in6)) {
ND_IFINFO(ifp)->flags |= ND6_IFF_IFDISABLED;
log(LOG_ERR, "%s: possible hardware address "
"duplication detected, disable IPv6\n",
if_name(ifp));
}
break;
}
}
TAILQ_REMOVE(&V_dadq, (struct dadq *)dp, dad_list);
free(dp, M_IP6NDP);
dp = NULL;
ifa_free(ifa);
}
static void
nd6_dad_ns_output(struct dadq *dp, struct ifaddr *ifa)
{
struct in6_ifaddr *ia = (struct in6_ifaddr *)ifa;
struct ifnet *ifp = ifa->ifa_ifp;
dp->dad_ns_tcount++;
if ((ifp->if_flags & IFF_UP) == 0) {
return;
}
if ((ifp->if_drv_flags & IFF_DRV_RUNNING) == 0) {
return;
}
dp->dad_ns_ocount++;
nd6_ns_output(ifp, NULL, &ia->ia_addr.sin6_addr, NULL, 1);
}
static void
nd6_dad_ns_input(struct ifaddr *ifa)
{
struct in6_ifaddr *ia;
struct ifnet *ifp;
const struct in6_addr *taddr6;
struct dadq *dp;
int duplicate;
if (ifa == NULL)
panic("ifa == NULL in nd6_dad_ns_input");
ia = (struct in6_ifaddr *)ifa;
ifp = ifa->ifa_ifp;
taddr6 = &ia->ia_addr.sin6_addr;
duplicate = 0;
dp = nd6_dad_find(ifa);
/* Quickhack - completely ignore DAD NS packets */
if (V_dad_ignore_ns) {
char ip6buf[INET6_ADDRSTRLEN];
nd6log((LOG_INFO,
"nd6_dad_ns_input: ignoring DAD NS packet for "
"address %s(%s)\n", ip6_sprintf(ip6buf, taddr6),
if_name(ifa->ifa_ifp)));
return;
}
/*
* if I'm yet to start DAD, someone else started using this address
* first. I have a duplicate and you win.
*/
if (dp == NULL || dp->dad_ns_ocount == 0)
duplicate++;
/* XXX more checks for loopback situation - see nd6_dad_timer too */
if (duplicate) {
dp = NULL; /* will be freed in nd6_dad_duplicated() */
nd6_dad_duplicated(ifa);
} else {
/*
* not sure if I got a duplicate.
* increment ns count and see what happens.
*/
if (dp)
dp->dad_ns_icount++;
}
}
static void
nd6_dad_na_input(struct ifaddr *ifa)
{
struct dadq *dp;
if (ifa == NULL)
panic("ifa == NULL in nd6_dad_na_input");
dp = nd6_dad_find(ifa);
if (dp)
dp->dad_na_icount++;
/* remove the address. */
nd6_dad_duplicated(ifa);
}