freebsd-dev/sys/dev/mii/brgphy.c

/*-
 * Copyright (c) 2000
 *	Bill Paul <wpaul@ee.columbia.edu>.  All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer.
 * 2. Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in the
 *    documentation and/or other materials provided with the distribution.
 * 3. All advertising materials mentioning features or use of this software
 *    must display the following acknowledgement:
 *	This product includes software developed by Bill Paul.
 * 4. Neither the name of the author nor the names of any co-contributors
 *    may be used to endorse or promote products derived from this software
 *    without specific prior written permission.
 *
 * THIS SOFTWARE IS PROVIDED BY Bill Paul AND CONTRIBUTORS ``AS IS'' AND
 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
 * ARE DISCLAIMED.  IN NO EVENT SHALL Bill Paul OR THE VOICES IN HIS HEAD
 * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
 * THE POSSIBILITY OF SUCH DAMAGE.
 */

#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");

/*
 * Driver for the Broadcom BCM54xx/57xx 1000baseTX PHY.
 */

#include <sys/param.h>
#include <sys/systm.h>
#include <sys/kernel.h>
#include <sys/module.h>
#include <sys/socket.h>
#include <sys/bus.h>

#include <net/if.h>
#include <net/ethernet.h>
#include <net/if_media.h>

#include <dev/mii/mii.h>
#include <dev/mii/miivar.h>
#include "miidevs.h"

#include <dev/mii/brgphyreg.h>
#include <net/if_arp.h>
#include <machine/bus.h>
#include <dev/bge/if_bgereg.h>
#include <dev/bce/if_bcereg.h>

#include <dev/pci/pcireg.h>
#include <dev/pci/pcivar.h>

#include "miibus_if.h"

static int brgphy_probe(device_t);
static int brgphy_attach(device_t);

struct brgphy_softc {
	struct mii_softc mii_sc;
	int mii_oui;
	int mii_model;
	int mii_rev;
	int serdes_flags;	/* Keeps track of the serdes type used */
#define BRGPHY_5706S		0x0001
#define BRGPHY_5708S		0x0002
#define BRGPHY_NOANWAIT		0x0004
#define BRGPHY_5709S		0x0008
	int bce_phy_flags;	/* PHY flags transferred from the MAC driver */
};

static device_method_t brgphy_methods[] = {
	/* device interface */
	DEVMETHOD(device_probe,		brgphy_probe),
	DEVMETHOD(device_attach,	brgphy_attach),
	DEVMETHOD(device_detach,	mii_phy_detach),
	DEVMETHOD(device_shutdown,	bus_generic_shutdown),
	{ 0, 0 }
};

static devclass_t brgphy_devclass;

static driver_t brgphy_driver = {
	"brgphy",
	brgphy_methods,
	sizeof(struct brgphy_softc)
};

DRIVER_MODULE(brgphy, miibus, brgphy_driver, brgphy_devclass, 0, 0);

static int	brgphy_service(struct mii_softc *, struct mii_data *, int);
static void	brgphy_setmedia(struct mii_softc *, int);
static void	brgphy_status(struct mii_softc *);
static void	brgphy_mii_phy_auto(struct mii_softc *, int);
static void	brgphy_reset(struct mii_softc *);
static void	brgphy_enable_loopback(struct mii_softc *);
static void	bcm5401_load_dspcode(struct mii_softc *);
static void	bcm5411_load_dspcode(struct mii_softc *);
static void	bcm54k2_load_dspcode(struct mii_softc *);
static void	brgphy_fixup_5704_a0_bug(struct mii_softc *);
static void	brgphy_fixup_adc_bug(struct mii_softc *);
static void	brgphy_fixup_adjust_trim(struct mii_softc *);
static void	brgphy_fixup_ber_bug(struct mii_softc *);
static void	brgphy_fixup_crc_bug(struct mii_softc *);
static void	brgphy_fixup_jitter_bug(struct mii_softc *);
static void	brgphy_ethernet_wirespeed(struct mii_softc *);
static void	brgphy_jumbo_settings(struct mii_softc *, u_long);

static const struct mii_phydesc brgphys[] = {
	MII_PHY_DESC(xxBROADCOM, BCM5400),
	MII_PHY_DESC(xxBROADCOM, BCM5401),
	MII_PHY_DESC(xxBROADCOM, BCM5411),
	MII_PHY_DESC(xxBROADCOM, BCM54K2),
	MII_PHY_DESC(xxBROADCOM, BCM5701),
	MII_PHY_DESC(xxBROADCOM, BCM5703),
	MII_PHY_DESC(xxBROADCOM, BCM5704),
	MII_PHY_DESC(xxBROADCOM, BCM5705),
	MII_PHY_DESC(xxBROADCOM, BCM5706),
	MII_PHY_DESC(xxBROADCOM, BCM5714),
	MII_PHY_DESC(xxBROADCOM, BCM5750),
	MII_PHY_DESC(xxBROADCOM, BCM5752),
	MII_PHY_DESC(xxBROADCOM, BCM5754),
	MII_PHY_DESC(xxBROADCOM, BCM5780),
	MII_PHY_DESC(xxBROADCOM, BCM5708C),
	MII_PHY_DESC(xxBROADCOM_ALT1, BCM5482S),
	MII_PHY_DESC(xxBROADCOM_ALT1, BCM5755),
	MII_PHY_DESC(xxBROADCOM_ALT1, BCM5787),
	MII_PHY_DESC(xxBROADCOM_ALT1, BCM5708S),
	MII_PHY_DESC(xxBROADCOM_ALT1, BCM5709CAX),
	MII_PHY_DESC(xxBROADCOM_ALT1, BCM5722),
	MII_PHY_DESC(xxBROADCOM_ALT1, BCM5784),
	MII_PHY_DESC(xxBROADCOM_ALT1, BCM5709C),
	MII_PHY_DESC(xxBROADCOM_ALT1, BCM5761),
	MII_PHY_DESC(xxBROADCOM_ALT1, BCM5709S),
	MII_PHY_DESC(xxBROADCOM_ALT2, BCM5717C),
	MII_PHY_DESC(BROADCOM2, BCM5906),
	MII_PHY_END
};

#define HS21_PRODUCT_ID	"IBM eServer BladeCenter HS21"
#define HS21_BCM_CHIPID	0x57081021

static int
detect_hs21(struct bce_softc *bce_sc)
{
	char *sysenv;
	int found;

	found = 0;
	if (bce_sc->bce_chipid == HS21_BCM_CHIPID) {
		sysenv = getenv("smbios.system.product");
		if (sysenv != NULL) {
			if (strcmp(sysenv, HS21_PRODUCT_ID) == 0)
				found = 1;
			freeenv(sysenv);
		}
	}
	return (found);
}

/* Search for our PHY in the list of known PHYs */
static int
brgphy_probe(device_t dev)
{

	return (mii_phy_dev_probe(dev, brgphys, BUS_PROBE_DEFAULT));
}

/* Attach the PHY to the MII bus */
static int
brgphy_attach(device_t dev)
{
	struct brgphy_softc *bsc;
	struct bge_softc *bge_sc = NULL;
	struct bce_softc *bce_sc = NULL;
	struct mii_softc *sc;
	struct mii_attach_args *ma;
	struct mii_data *mii;
	struct ifnet *ifp;

	bsc = device_get_softc(dev);
	sc = &bsc->mii_sc;
	ma = device_get_ivars(dev);
	sc->mii_dev = device_get_parent(dev);
	mii = ma->mii_data;
	LIST_INSERT_HEAD(&mii->mii_phys, sc, mii_list);

	/* Initialize mii_softc structure */
	sc->mii_flags = miibus_get_flags(dev);
	sc->mii_inst = mii->mii_instance++;
	sc->mii_phy = ma->mii_phyno;
	sc->mii_service = brgphy_service;
	sc->mii_pdata = mii;

	/*
	 * At least some variants wedge when isolating, at least some also
	 * don't support loopback.
	 */
	sc->mii_flags |= MIIF_NOISOLATE | MIIF_NOLOOP | MIIF_NOMANPAUSE;

	/* Initialize brgphy_softc structure */
	bsc->mii_oui = MII_OUI(ma->mii_id1, ma->mii_id2);
	bsc->mii_model = MII_MODEL(ma->mii_id2);
	bsc->mii_rev = MII_REV(ma->mii_id2);
	bsc->serdes_flags = 0;

	if (bootverbose)
		device_printf(dev, "OUI 0x%06x, model 0x%04x, rev. %d\n",
		    bsc->mii_oui, bsc->mii_model, bsc->mii_rev);

	/* Handle any special cases based on the PHY ID */
	switch (bsc->mii_oui) {
	case MII_OUI_BROADCOM:
	case MII_OUI_BROADCOM2:
		break;
	case MII_OUI_xxBROADCOM:
		switch (bsc->mii_model) {
		case MII_MODEL_xxBROADCOM_BCM5706:
		case MII_MODEL_xxBROADCOM_BCM5714:
			/*
			 * The 5464 PHY used in the 5706 supports both copper
			 * and fiber interfaces over GMII.  Need to check the
			 * shadow registers to see which mode is actually
			 * in effect, and therefore whether we have 5706C or
			 * 5706S.
			 */
			PHY_WRITE(sc, BRGPHY_MII_SHADOW_1C,
				BRGPHY_SHADOW_1C_MODE_CTRL);
			if (PHY_READ(sc, BRGPHY_MII_SHADOW_1C) &
				BRGPHY_SHADOW_1C_ENA_1000X) {
				bsc->serdes_flags |= BRGPHY_5706S;
				sc->mii_flags |= MIIF_HAVEFIBER;
			}
			break;
		} break;
	case MII_OUI_xxBROADCOM_ALT1:
		switch (bsc->mii_model) {
		case MII_MODEL_xxBROADCOM_ALT1_BCM5708S:
			bsc->serdes_flags |= BRGPHY_5708S;
			sc->mii_flags |= MIIF_HAVEFIBER;
			break;
		case MII_MODEL_xxBROADCOM_ALT1_BCM5709S:
			bsc->serdes_flags |= BRGPHY_5709S;
			sc->mii_flags |= MIIF_HAVEFIBER;
			break;
		}
		break;
	case MII_OUI_xxBROADCOM_ALT2:
		/* No special handling yet. */
		break;
	default:
		device_printf(dev, "Unrecognized OUI for PHY!\n");
	}

	ifp = sc->mii_pdata->mii_ifp;

	/* Find the MAC driver associated with this PHY. */
	if (strcmp(ifp->if_dname, "bge") == 0)	{
		bge_sc = ifp->if_softc;
	} else if (strcmp(ifp->if_dname, "bce") == 0) {
		bce_sc = ifp->if_softc;
	}

	brgphy_reset(sc);

	/* Read the PHY's capabilities. */
	sc->mii_capabilities = PHY_READ(sc, MII_BMSR) & ma->mii_capmask;
	if (sc->mii_capabilities & BMSR_EXTSTAT)
		sc->mii_extcapabilities = PHY_READ(sc, MII_EXTSR);
	device_printf(dev, " ");

#define	ADD(m, c)	ifmedia_add(&mii->mii_media, (m), (c), NULL)

	/* Add the supported media types */
	if ((sc->mii_flags & MIIF_HAVEFIBER) == 0) {
		mii_phy_add_media(sc);
		printf("\n");
	} else {
		sc->mii_anegticks = MII_ANEGTICKS_GIGE;
		ADD(IFM_MAKEWORD(IFM_ETHER, IFM_1000_SX, IFM_FDX, sc->mii_inst),
			BRGPHY_S1000 | BRGPHY_BMCR_FDX);
		printf("1000baseSX-FDX, ");
		/* 2.5G support is a software enabled feature on the 5708S and 5709S. */
		if (bce_sc && (bce_sc->bce_phy_flags & BCE_PHY_2_5G_CAPABLE_FLAG)) {
			ADD(IFM_MAKEWORD(IFM_ETHER, IFM_2500_SX, IFM_FDX, sc->mii_inst), 0);
			printf("2500baseSX-FDX, ");
		} else if ((bsc->serdes_flags & BRGPHY_5708S) && bce_sc &&
		    (detect_hs21(bce_sc) != 0)) {
			/*
			 * There appears to be certain silicon revision
			 * in IBM HS21 blades that is having issues with
			 * this driver wating for the auto-negotiation to
			 * complete. This happens with a specific chip id
			 * only and when the 1000baseSX-FDX is the only
			 * mode. Workaround this issue since it's unlikely
			 * to be ever addressed.
			 */
			printf("auto-neg workaround, ");
			bsc->serdes_flags |= BRGPHY_NOANWAIT;
		}
		ADD(IFM_MAKEWORD(IFM_ETHER, IFM_AUTO, 0, sc->mii_inst), 0);
		printf("auto\n");
	}

#undef ADD
	MIIBUS_MEDIAINIT(sc->mii_dev);
	return (0);
}

static int
brgphy_service(struct mii_softc *sc, struct mii_data *mii, int cmd)
{
	struct brgphy_softc *bsc = (struct brgphy_softc *)sc;
	struct ifmedia_entry *ife = mii->mii_media.ifm_cur;
	int val;

	switch (cmd) {
	case MII_POLLSTAT:
		break;
	case MII_MEDIACHG:
		/* If the interface is not up, don't do anything. */
		if ((mii->mii_ifp->if_flags & IFF_UP) == 0)
			break;

		/* Todo: Why is this here?  Is it really needed? */
		brgphy_reset(sc);	/* XXX hardware bug work-around */

		switch (IFM_SUBTYPE(ife->ifm_media)) {
		case IFM_AUTO:
			brgphy_mii_phy_auto(sc, ife->ifm_media);
			break;
		case IFM_2500_SX:
		case IFM_1000_SX:
		case IFM_1000_T:
		case IFM_100_TX:
		case IFM_10_T:
			brgphy_setmedia(sc, ife->ifm_media);
			break;
		default:
			return (EINVAL);
		}
		break;
	case MII_TICK:
		/* Bail if the interface isn't up. */
		if ((mii->mii_ifp->if_flags & IFF_UP) == 0)
			return (0);


		/* Bail if autoneg isn't in process. */
		if (IFM_SUBTYPE(ife->ifm_media) != IFM_AUTO) {
			sc->mii_ticks = 0;
			break;
		}

		/*
		 * Check to see if we have link.  If we do, we don't
		 * need to restart the autonegotiation process.
		 */
		val = PHY_READ(sc, MII_BMSR) | PHY_READ(sc, MII_BMSR);
		if (val & BMSR_LINK) {
			sc->mii_ticks = 0;	/* Reset autoneg timer. */
			break;
		}

		/* Announce link loss right after it happens. */
		if (sc->mii_ticks++ == 0)
			break;

		/* Only retry autonegotiation every mii_anegticks seconds. */
		if (sc->mii_ticks <= sc->mii_anegticks)
			break;


		/* Retry autonegotiation */
		sc->mii_ticks = 0;
		brgphy_mii_phy_auto(sc, ife->ifm_media);
		break;
	}

	/* Update the media status. */
	brgphy_status(sc);

	/*
	 * Callback if something changed. Note that we need to poke
	 * the DSP on the Broadcom PHYs if the media changes.
	 */
	if (sc->mii_media_active != mii->mii_media_active ||
	    sc->mii_media_status != mii->mii_media_status ||
	    cmd == MII_MEDIACHG) {
		switch (bsc->mii_oui) {
		case MII_OUI_BROADCOM:
			break;
		case MII_OUI_xxBROADCOM:
			switch (bsc->mii_model) {
			case MII_MODEL_xxBROADCOM_BCM5400:
				bcm5401_load_dspcode(sc);
				break;
			case MII_MODEL_xxBROADCOM_BCM5401:
				if (bsc->mii_rev == 1 || bsc->mii_rev == 3)
					bcm5401_load_dspcode(sc);
				break;
			case MII_MODEL_xxBROADCOM_BCM5411:
				bcm5411_load_dspcode(sc);
				break;
			case MII_MODEL_xxBROADCOM_BCM54K2:
				bcm54k2_load_dspcode(sc);
				break;
			}
			break;
		case MII_OUI_xxBROADCOM_ALT1:
			break;
		}
	}
	mii_phy_update(sc, cmd);
	return (0);
}

/****************************************************************************/
/* Sets the PHY link speed.                                                 */
/*                                                                          */
/* Returns:                                                                 */
/*   None                                                                   */
/****************************************************************************/
static void
brgphy_setmedia(struct mii_softc *sc, int media)
{
	int bmcr = 0, gig;

	switch (IFM_SUBTYPE(media)) {
	case IFM_2500_SX:
		break;
	case IFM_1000_SX:
	case IFM_1000_T:
		bmcr = BRGPHY_S1000;
		break;
	case IFM_100_TX:
		bmcr = BRGPHY_S100;
		break;
	case IFM_10_T:
	default:
		bmcr = BRGPHY_S10;
		break;
	}

	if ((media & IFM_GMASK) == IFM_FDX) {
		bmcr |= BRGPHY_BMCR_FDX;
		gig = BRGPHY_1000CTL_AFD;
	} else {
		gig = BRGPHY_1000CTL_AHD;
	}

	/* Force loopback to disconnect PHY from Ethernet medium. */
	brgphy_enable_loopback(sc);

	PHY_WRITE(sc, BRGPHY_MII_1000CTL, 0);
	PHY_WRITE(sc, BRGPHY_MII_ANAR, BRGPHY_SEL_TYPE);

	if (IFM_SUBTYPE(media) != IFM_1000_T &&
	    IFM_SUBTYPE(media) != IFM_1000_SX) {
		PHY_WRITE(sc, BRGPHY_MII_BMCR, bmcr);
		return;
	}

	if (IFM_SUBTYPE(media) == IFM_1000_T) {
		gig |= BRGPHY_1000CTL_MSE;
		if ((media & IFM_ETH_MASTER) != 0)
			gig |= BRGPHY_1000CTL_MSC;
	}
	PHY_WRITE(sc, BRGPHY_MII_1000CTL, gig);
	PHY_WRITE(sc, BRGPHY_MII_BMCR,
	    bmcr | BRGPHY_BMCR_AUTOEN | BRGPHY_BMCR_STARTNEG);
}

/****************************************************************************/
/* Set the media status based on the PHY settings.                          */
/*                                                                          */
/* Returns:                                                                 */
/*   None                                                                   */
/****************************************************************************/
static void
brgphy_status(struct mii_softc *sc)
{
	struct brgphy_softc *bsc = (struct brgphy_softc *)sc;
	struct mii_data *mii = sc->mii_pdata;
	int aux, bmcr, bmsr, val, xstat;
	u_int flowstat;

	mii->mii_media_status = IFM_AVALID;
	mii->mii_media_active = IFM_ETHER;

	bmsr = PHY_READ(sc, BRGPHY_MII_BMSR) | PHY_READ(sc, BRGPHY_MII_BMSR);
	bmcr = PHY_READ(sc, BRGPHY_MII_BMCR);

	if (bmcr & BRGPHY_BMCR_LOOP) {
		mii->mii_media_active |= IFM_LOOP;
	}

	if ((bmcr & BRGPHY_BMCR_AUTOEN) &&
	    (bmsr & BRGPHY_BMSR_ACOMP) == 0 &&
	    (bsc->serdes_flags & BRGPHY_NOANWAIT) == 0) {
		/* Erg, still trying, I guess... */
		mii->mii_media_active |= IFM_NONE;
		return;
	}

	if ((sc->mii_flags & MIIF_HAVEFIBER) == 0) {
		/*
		 * NB: reading the ANAR, ANLPAR or 1000STS after the AUXSTS
		 * wedges at least the PHY of BCM5704 (but not others).
		 */
		flowstat = mii_phy_flowstatus(sc);
		xstat = PHY_READ(sc, BRGPHY_MII_1000STS);
		aux = PHY_READ(sc, BRGPHY_MII_AUXSTS);

		/* If copper link is up, get the negotiated speed/duplex. */
		if (aux & BRGPHY_AUXSTS_LINK) {
			mii->mii_media_status |= IFM_ACTIVE;
			switch (aux & BRGPHY_AUXSTS_AN_RES) {
			case BRGPHY_RES_1000FD:
				mii->mii_media_active |= IFM_1000_T | IFM_FDX; 	break;
			case BRGPHY_RES_1000HD:
				mii->mii_media_active |= IFM_1000_T | IFM_HDX; 	break;
			case BRGPHY_RES_100FD:
				mii->mii_media_active |= IFM_100_TX | IFM_FDX; break;
			case BRGPHY_RES_100T4:
				mii->mii_media_active |= IFM_100_T4; break;
			case BRGPHY_RES_100HD:
				mii->mii_media_active |= IFM_100_TX | IFM_HDX; 	break;
			case BRGPHY_RES_10FD:
				mii->mii_media_active |= IFM_10_T | IFM_FDX; break;
			case BRGPHY_RES_10HD:
				mii->mii_media_active |= IFM_10_T | IFM_HDX; break;
			default:
				mii->mii_media_active |= IFM_NONE; break;
			}

			if ((mii->mii_media_active & IFM_FDX) != 0)
				mii->mii_media_active |= flowstat;

			if (IFM_SUBTYPE(mii->mii_media_active) == IFM_1000_T &&
			    (xstat & BRGPHY_1000STS_MSR) != 0)
				mii->mii_media_active |= IFM_ETH_MASTER;
		}
	} else {
		/* Todo: Add support for flow control. */
		/* If serdes link is up, get the negotiated speed/duplex. */
		if (bmsr & BRGPHY_BMSR_LINK) {
			mii->mii_media_status |= IFM_ACTIVE;
		}

		/* Check the link speed/duplex based on the PHY type. */
		if (bsc->serdes_flags & BRGPHY_5706S) {
			mii->mii_media_active |= IFM_1000_SX;

			/* If autoneg enabled, read negotiated duplex settings */
			if (bmcr & BRGPHY_BMCR_AUTOEN) {
				val = PHY_READ(sc, BRGPHY_SERDES_ANAR) & PHY_READ(sc, BRGPHY_SERDES_ANLPAR);
				if (val & BRGPHY_SERDES_ANAR_FDX)
					mii->mii_media_active |= IFM_FDX;
				else
					mii->mii_media_active |= IFM_HDX;
			}
		} else if (bsc->serdes_flags & BRGPHY_5708S) {
			PHY_WRITE(sc, BRGPHY_5708S_BLOCK_ADDR, BRGPHY_5708S_DIG_PG0);
			xstat = PHY_READ(sc, BRGPHY_5708S_PG0_1000X_STAT1);

			/* Check for MRBE auto-negotiated speed results. */
			switch (xstat & BRGPHY_5708S_PG0_1000X_STAT1_SPEED_MASK) {
			case BRGPHY_5708S_PG0_1000X_STAT1_SPEED_10:
				mii->mii_media_active |= IFM_10_FL; break;
			case BRGPHY_5708S_PG0_1000X_STAT1_SPEED_100:
				mii->mii_media_active |= IFM_100_FX; break;
			case BRGPHY_5708S_PG0_1000X_STAT1_SPEED_1G:
				mii->mii_media_active |= IFM_1000_SX; break;
			case BRGPHY_5708S_PG0_1000X_STAT1_SPEED_25G:
				mii->mii_media_active |= IFM_2500_SX; break;
			}

			/* Check for MRBE auto-negotiated duplex results. */
			if (xstat & BRGPHY_5708S_PG0_1000X_STAT1_FDX)
				mii->mii_media_active |= IFM_FDX;
			else
				mii->mii_media_active |= IFM_HDX;
		} else if (bsc->serdes_flags & BRGPHY_5709S) {
			/* Select GP Status Block of the AN MMD, get autoneg results. */
			PHY_WRITE(sc, BRGPHY_BLOCK_ADDR, BRGPHY_BLOCK_ADDR_GP_STATUS);
			xstat = PHY_READ(sc, BRGPHY_GP_STATUS_TOP_ANEG_STATUS);

			/* Restore IEEE0 block (assumed in all brgphy(4) code). */
			PHY_WRITE(sc, BRGPHY_BLOCK_ADDR, BRGPHY_BLOCK_ADDR_COMBO_IEEE0);

			/* Check for MRBE auto-negotiated speed results. */
			switch (xstat & BRGPHY_GP_STATUS_TOP_ANEG_SPEED_MASK) {
				case BRGPHY_GP_STATUS_TOP_ANEG_SPEED_10:
					mii->mii_media_active |= IFM_10_FL; break;
				case BRGPHY_GP_STATUS_TOP_ANEG_SPEED_100:
					mii->mii_media_active |= IFM_100_FX; break;
				case BRGPHY_GP_STATUS_TOP_ANEG_SPEED_1G:
					mii->mii_media_active |= IFM_1000_SX; break;
				case BRGPHY_GP_STATUS_TOP_ANEG_SPEED_25G:
					mii->mii_media_active |= IFM_2500_SX; break;
			}

			/* Check for MRBE auto-negotiated duplex results. */
			if (xstat & BRGPHY_GP_STATUS_TOP_ANEG_FDX)
				mii->mii_media_active |= IFM_FDX;
			else
				mii->mii_media_active |= IFM_HDX;
		}
	}
}

static void
brgphy_mii_phy_auto(struct mii_softc *sc, int media)
{
	struct brgphy_softc *bsc = (struct brgphy_softc *)sc;
	int anar, ktcr = 0;

	brgphy_reset(sc);

	if ((sc->mii_flags & MIIF_HAVEFIBER) == 0) {
		anar = BMSR_MEDIA_TO_ANAR(sc->mii_capabilities) | ANAR_CSMA;
		if ((media & IFM_FLOW) != 0 ||
		    (sc->mii_flags & MIIF_FORCEPAUSE) != 0)
			anar |= BRGPHY_ANAR_PC | BRGPHY_ANAR_ASP;
		PHY_WRITE(sc, BRGPHY_MII_ANAR, anar);
	} else {
		anar = BRGPHY_SERDES_ANAR_FDX | BRGPHY_SERDES_ANAR_HDX;
		if ((media & IFM_FLOW) != 0 ||
		    (sc->mii_flags & MIIF_FORCEPAUSE) != 0)
			anar |= BRGPHY_SERDES_ANAR_BOTH_PAUSE;
		PHY_WRITE(sc, BRGPHY_SERDES_ANAR, anar);
	}

	ktcr = BRGPHY_1000CTL_AFD | BRGPHY_1000CTL_AHD;
	if (bsc->mii_model == MII_MODEL_xxBROADCOM_BCM5701)
		ktcr |= BRGPHY_1000CTL_MSE | BRGPHY_1000CTL_MSC;
	PHY_WRITE(sc, BRGPHY_MII_1000CTL, ktcr);
	ktcr = PHY_READ(sc, BRGPHY_MII_1000CTL);

	PHY_WRITE(sc, BRGPHY_MII_BMCR, BRGPHY_BMCR_AUTOEN |
	    BRGPHY_BMCR_STARTNEG);
	PHY_WRITE(sc, BRGPHY_MII_IMR, 0xFF00);
}

/* Enable loopback to force the link down. */
static void
brgphy_enable_loopback(struct mii_softc *sc)
{
	int i;

	PHY_WRITE(sc, BRGPHY_MII_BMCR, BRGPHY_BMCR_LOOP);
	for (i = 0; i < 15000; i++) {
		if (!(PHY_READ(sc, BRGPHY_MII_BMSR) & BRGPHY_BMSR_LINK))
			break;
		DELAY(10);
	}
}

/* Turn off tap power management on 5401. */
static void
bcm5401_load_dspcode(struct mii_softc *sc)
{
	static const struct {
		int		reg;
		uint16_t	val;
	} dspcode[] = {
		{ BRGPHY_MII_AUXCTL,		0x0c20 },
		{ BRGPHY_MII_DSP_ADDR_REG,	0x0012 },
		{ BRGPHY_MII_DSP_RW_PORT,	0x1804 },
		{ BRGPHY_MII_DSP_ADDR_REG,	0x0013 },
		{ BRGPHY_MII_DSP_RW_PORT,	0x1204 },
		{ BRGPHY_MII_DSP_ADDR_REG,	0x8006 },
		{ BRGPHY_MII_DSP_RW_PORT,	0x0132 },
		{ BRGPHY_MII_DSP_ADDR_REG,	0x8006 },
		{ BRGPHY_MII_DSP_RW_PORT,	0x0232 },
		{ BRGPHY_MII_DSP_ADDR_REG,	0x201f },
		{ BRGPHY_MII_DSP_RW_PORT,	0x0a20 },
		{ 0,				0 },
	};
	int i;

	for (i = 0; dspcode[i].reg != 0; i++)
		PHY_WRITE(sc, dspcode[i].reg, dspcode[i].val);
	DELAY(40);
}

static void
bcm5411_load_dspcode(struct mii_softc *sc)
{
	static const struct {
		int		reg;
		uint16_t	val;
	} dspcode[] = {
		{ 0x1c,				0x8c23 },
		{ 0x1c,				0x8ca3 },
		{ 0x1c,				0x8c23 },
		{ 0,				0 },
	};
	int i;

	for (i = 0; dspcode[i].reg != 0; i++)
		PHY_WRITE(sc, dspcode[i].reg, dspcode[i].val);
}

void
bcm54k2_load_dspcode(struct mii_softc *sc)
{
	static const struct {
		int		reg;
		uint16_t	val;
	} dspcode[] = {
		{ 4,				0x01e1 },
		{ 9,				0x0300 },
		{ 0,				0 },
	};
	int i;

	for (i = 0; dspcode[i].reg != 0; i++)
		PHY_WRITE(sc, dspcode[i].reg, dspcode[i].val);

}

static void
brgphy_fixup_5704_a0_bug(struct mii_softc *sc)
{
	static const struct {
		int		reg;
		uint16_t	val;
	} dspcode[] = {
		{ 0x1c,				0x8d68 },
		{ 0x1c,				0x8d68 },
		{ 0,				0 },
	};
	int i;

	for (i = 0; dspcode[i].reg != 0; i++)
		PHY_WRITE(sc, dspcode[i].reg, dspcode[i].val);
}

static void
brgphy_fixup_adc_bug(struct mii_softc *sc)
{
	static const struct {
		int		reg;
		uint16_t	val;
	} dspcode[] = {
		{ BRGPHY_MII_AUXCTL,		0x0c00 },
		{ BRGPHY_MII_DSP_ADDR_REG,	0x201f },
		{ BRGPHY_MII_DSP_RW_PORT,	0x2aaa },
		{ 0,				0 },
	};
	int i;

	for (i = 0; dspcode[i].reg != 0; i++)
		PHY_WRITE(sc, dspcode[i].reg, dspcode[i].val);
}

static void
brgphy_fixup_adjust_trim(struct mii_softc *sc)
{
	static const struct {
		int		reg;
		uint16_t	val;
	} dspcode[] = {
		{ BRGPHY_MII_AUXCTL,		0x0c00 },
		{ BRGPHY_MII_DSP_ADDR_REG,	0x000a },
		{ BRGPHY_MII_DSP_RW_PORT,	0x110b },
		{ BRGPHY_MII_TEST1,			0x0014 },
		{ BRGPHY_MII_AUXCTL,		0x0400 },
		{ 0,				0 },
	};
	int i;

	for (i = 0; dspcode[i].reg != 0; i++)
		PHY_WRITE(sc, dspcode[i].reg, dspcode[i].val);
}

static void
brgphy_fixup_ber_bug(struct mii_softc *sc)
{
	static const struct {
		int		reg;
		uint16_t	val;
	} dspcode[] = {
		{ BRGPHY_MII_AUXCTL,		0x0c00 },
		{ BRGPHY_MII_DSP_ADDR_REG,	0x000a },
		{ BRGPHY_MII_DSP_RW_PORT,	0x310b },
		{ BRGPHY_MII_DSP_ADDR_REG,	0x201f },
		{ BRGPHY_MII_DSP_RW_PORT,	0x9506 },
		{ BRGPHY_MII_DSP_ADDR_REG,	0x401f },
		{ BRGPHY_MII_DSP_RW_PORT,	0x14e2 },
		{ BRGPHY_MII_AUXCTL,		0x0400 },
		{ 0,				0 },
	};
	int i;

	for (i = 0; dspcode[i].reg != 0; i++)
		PHY_WRITE(sc, dspcode[i].reg, dspcode[i].val);
}

static void
brgphy_fixup_crc_bug(struct mii_softc *sc)
{
	static const struct {
		int		reg;
		uint16_t	val;
	} dspcode[] = {
		{ BRGPHY_MII_DSP_RW_PORT,	0x0a75 },
		{ 0x1c,				0x8c68 },
		{ 0x1c,				0x8d68 },
		{ 0x1c,				0x8c68 },
		{ 0,				0 },
	};
	int i;

	for (i = 0; dspcode[i].reg != 0; i++)
		PHY_WRITE(sc, dspcode[i].reg, dspcode[i].val);
}

static void
brgphy_fixup_jitter_bug(struct mii_softc *sc)
{
	static const struct {
		int		reg;
		uint16_t	val;
	} dspcode[] = {
		{ BRGPHY_MII_AUXCTL,		0x0c00 },
		{ BRGPHY_MII_DSP_ADDR_REG,	0x000a },
		{ BRGPHY_MII_DSP_RW_PORT,	0x010b },
		{ BRGPHY_MII_AUXCTL,		0x0400 },
		{ 0,				0 },
	};
	int i;

	for (i = 0; dspcode[i].reg != 0; i++)
		PHY_WRITE(sc, dspcode[i].reg, dspcode[i].val);
}

static void
brgphy_fixup_disable_early_dac(struct mii_softc *sc)
{
	uint32_t val;

	PHY_WRITE(sc, BRGPHY_MII_DSP_ADDR_REG, 0x0f08);
	val = PHY_READ(sc, BRGPHY_MII_DSP_RW_PORT);
	val &= ~(1 << 8);
	PHY_WRITE(sc, BRGPHY_MII_DSP_RW_PORT, val);

}

static void
brgphy_ethernet_wirespeed(struct mii_softc *sc)
{
	uint32_t	val;

	/* Enable Ethernet@WireSpeed. */
	PHY_WRITE(sc, BRGPHY_MII_AUXCTL, 0x7007);
	val = PHY_READ(sc, BRGPHY_MII_AUXCTL);
	PHY_WRITE(sc, BRGPHY_MII_AUXCTL, val | (1 << 15) | (1 << 4));
}

static void
brgphy_jumbo_settings(struct mii_softc *sc, u_long mtu)
{
	struct brgphy_softc *bsc = (struct brgphy_softc *)sc;
	uint32_t	val;

	/* Set or clear jumbo frame settings in the PHY. */
	if (mtu > ETHER_MAX_LEN) {
		if (bsc->mii_model == MII_MODEL_xxBROADCOM_BCM5401) {
			/* BCM5401 PHY cannot read-modify-write. */
			PHY_WRITE(sc, BRGPHY_MII_AUXCTL, 0x4c20);
		} else {
			PHY_WRITE(sc, BRGPHY_MII_AUXCTL, 0x7);
			val = PHY_READ(sc, BRGPHY_MII_AUXCTL);
			PHY_WRITE(sc, BRGPHY_MII_AUXCTL,
			    val | BRGPHY_AUXCTL_LONG_PKT);
		}

		val = PHY_READ(sc, BRGPHY_MII_PHY_EXTCTL);
		PHY_WRITE(sc, BRGPHY_MII_PHY_EXTCTL,
		    val | BRGPHY_PHY_EXTCTL_HIGH_LA);
	} else {
		PHY_WRITE(sc, BRGPHY_MII_AUXCTL, 0x7);
		val = PHY_READ(sc, BRGPHY_MII_AUXCTL);
		PHY_WRITE(sc, BRGPHY_MII_AUXCTL,
		    val & ~(BRGPHY_AUXCTL_LONG_PKT | 0x7));

		val = PHY_READ(sc, BRGPHY_MII_PHY_EXTCTL);
		PHY_WRITE(sc, BRGPHY_MII_PHY_EXTCTL,
			val & ~BRGPHY_PHY_EXTCTL_HIGH_LA);
	}
}

static void
brgphy_reset(struct mii_softc *sc)
{
	struct brgphy_softc *bsc = (struct brgphy_softc *)sc;
	struct bge_softc *bge_sc = NULL;
	struct bce_softc *bce_sc = NULL;
	struct ifnet *ifp;
	int val;

	/* Perform a standard PHY reset. */
	mii_phy_reset(sc);

	/* Handle any PHY specific procedures following the reset. */
	switch (bsc->mii_oui) {
	case MII_OUI_BROADCOM:
		break;
	case MII_OUI_xxBROADCOM:
		switch (bsc->mii_model) {
		case MII_MODEL_xxBROADCOM_BCM5400:
			bcm5401_load_dspcode(sc);
			break;
		case MII_MODEL_xxBROADCOM_BCM5401:
			if (bsc->mii_rev == 1 || bsc->mii_rev == 3)
				bcm5401_load_dspcode(sc);
			break;
		case MII_MODEL_xxBROADCOM_BCM5411:
			bcm5411_load_dspcode(sc);
			break;
		case MII_MODEL_xxBROADCOM_BCM54K2:
			bcm54k2_load_dspcode(sc);
			break;
		}
		break;
	case MII_OUI_xxBROADCOM_ALT1:
	case MII_OUI_xxBROADCOM_ALT2:
		break;
	}

	ifp = sc->mii_pdata->mii_ifp;

	/* Find the driver associated with this PHY. */
	if (strcmp(ifp->if_dname, "bge") == 0)	{
		bge_sc = ifp->if_softc;
	} else if (strcmp(ifp->if_dname, "bce") == 0) {
		bce_sc = ifp->if_softc;
	}

	if (bge_sc) {
		/* Fix up various bugs */
		if (bge_sc->bge_phy_flags & BGE_PHY_5704_A0_BUG)
			brgphy_fixup_5704_a0_bug(sc);
		if (bge_sc->bge_phy_flags & BGE_PHY_ADC_BUG)
			brgphy_fixup_adc_bug(sc);
		if (bge_sc->bge_phy_flags & BGE_PHY_ADJUST_TRIM)
			brgphy_fixup_adjust_trim(sc);
		if (bge_sc->bge_phy_flags & BGE_PHY_BER_BUG)
			brgphy_fixup_ber_bug(sc);
		if (bge_sc->bge_phy_flags & BGE_PHY_CRC_BUG)
			brgphy_fixup_crc_bug(sc);
		if (bge_sc->bge_phy_flags & BGE_PHY_JITTER_BUG)
			brgphy_fixup_jitter_bug(sc);

		brgphy_jumbo_settings(sc, ifp->if_mtu);

		if (bge_sc->bge_phy_flags & BGE_PHY_WIRESPEED)
			brgphy_ethernet_wirespeed(sc);

		/* Enable Link LED on Dell boxes */
		if (bge_sc->bge_phy_flags & BGE_PHY_NO_3LED) {
			PHY_WRITE(sc, BRGPHY_MII_PHY_EXTCTL,
			    PHY_READ(sc, BRGPHY_MII_PHY_EXTCTL) &
			    ~BRGPHY_PHY_EXTCTL_3_LED);
		}

		/* Adjust output voltage (From Linux driver) */
		if (bge_sc->bge_asicrev == BGE_ASICREV_BCM5906)
			PHY_WRITE(sc, BRGPHY_MII_EPHY_PTEST, 0x12);
	} else if (bce_sc) {
		if (BCE_CHIP_NUM(bce_sc) == BCE_CHIP_NUM_5708 &&
			(bce_sc->bce_phy_flags & BCE_PHY_SERDES_FLAG)) {

			/* Store autoneg capabilities/results in digital block (Page 0) */
			PHY_WRITE(sc, BRGPHY_5708S_BLOCK_ADDR, BRGPHY_5708S_DIG3_PG2);
			PHY_WRITE(sc, BRGPHY_5708S_PG2_DIGCTL_3_0,
				BRGPHY_5708S_PG2_DIGCTL_3_0_USE_IEEE);
			PHY_WRITE(sc, BRGPHY_5708S_BLOCK_ADDR, BRGPHY_5708S_DIG_PG0);

			/* Enable fiber mode and autodetection */
			PHY_WRITE(sc, BRGPHY_5708S_PG0_1000X_CTL1,
				PHY_READ(sc, BRGPHY_5708S_PG0_1000X_CTL1) |
				BRGPHY_5708S_PG0_1000X_CTL1_AUTODET_EN |
				BRGPHY_5708S_PG0_1000X_CTL1_FIBER_MODE);

			/* Enable parallel detection */
			PHY_WRITE(sc, BRGPHY_5708S_PG0_1000X_CTL2,
				PHY_READ(sc, BRGPHY_5708S_PG0_1000X_CTL2) |
				BRGPHY_5708S_PG0_1000X_CTL2_PAR_DET_EN);

			/* Advertise 2.5G support through next page during autoneg */
			if (bce_sc->bce_phy_flags & BCE_PHY_2_5G_CAPABLE_FLAG)
				PHY_WRITE(sc, BRGPHY_5708S_ANEG_NXT_PG_XMIT1,
					PHY_READ(sc, BRGPHY_5708S_ANEG_NXT_PG_XMIT1) |
					BRGPHY_5708S_ANEG_NXT_PG_XMIT1_25G);

			/* Increase TX signal amplitude */
			if ((BCE_CHIP_ID(bce_sc) == BCE_CHIP_ID_5708_A0) ||
			    (BCE_CHIP_ID(bce_sc) == BCE_CHIP_ID_5708_B0) ||
			    (BCE_CHIP_ID(bce_sc) == BCE_CHIP_ID_5708_B1)) {
				PHY_WRITE(sc, BRGPHY_5708S_BLOCK_ADDR,
					BRGPHY_5708S_TX_MISC_PG5);
				PHY_WRITE(sc, BRGPHY_5708S_PG5_TXACTL1,
					PHY_READ(sc, BRGPHY_5708S_PG5_TXACTL1) & ~0x30);
				PHY_WRITE(sc, BRGPHY_5708S_BLOCK_ADDR,
					BRGPHY_5708S_DIG_PG0);
			}

			/* Backplanes use special driver/pre-driver/pre-emphasis values. */
			if ((bce_sc->bce_shared_hw_cfg & BCE_SHARED_HW_CFG_PHY_BACKPLANE) &&
				(bce_sc->bce_port_hw_cfg & BCE_PORT_HW_CFG_CFG_TXCTL3_MASK)) {
					PHY_WRITE(sc, BRGPHY_5708S_BLOCK_ADDR,
						BRGPHY_5708S_TX_MISC_PG5);
					PHY_WRITE(sc, BRGPHY_5708S_PG5_TXACTL3,
						bce_sc->bce_port_hw_cfg &
						BCE_PORT_HW_CFG_CFG_TXCTL3_MASK);
					PHY_WRITE(sc, BRGPHY_5708S_BLOCK_ADDR,
						BRGPHY_5708S_DIG_PG0);
			}
		} else if (BCE_CHIP_NUM(bce_sc) == BCE_CHIP_NUM_5709 &&
			(bce_sc->bce_phy_flags & BCE_PHY_SERDES_FLAG)) {

			/* Select the SerDes Digital block of the AN MMD. */
			PHY_WRITE(sc, BRGPHY_BLOCK_ADDR, BRGPHY_BLOCK_ADDR_SERDES_DIG);
			val = PHY_READ(sc, BRGPHY_SERDES_DIG_1000X_CTL1);
			val &= ~BRGPHY_SD_DIG_1000X_CTL1_AUTODET;
			val |= BRGPHY_SD_DIG_1000X_CTL1_FIBER;
			PHY_WRITE(sc, BRGPHY_SERDES_DIG_1000X_CTL1, val);

			/* Select the Over 1G block of the AN MMD. */
			PHY_WRITE(sc, BRGPHY_BLOCK_ADDR, BRGPHY_BLOCK_ADDR_OVER_1G);

			/* Enable autoneg "Next Page" to advertise 2.5G support. */
			val = PHY_READ(sc, BRGPHY_OVER_1G_UNFORMAT_PG1);
			if (bce_sc->bce_phy_flags & BCE_PHY_2_5G_CAPABLE_FLAG)
				val |= BRGPHY_5708S_ANEG_NXT_PG_XMIT1_25G;
			else
				val &= ~BRGPHY_5708S_ANEG_NXT_PG_XMIT1_25G;
			PHY_WRITE(sc, BRGPHY_OVER_1G_UNFORMAT_PG1, val);

			/* Select the Multi-Rate Backplane Ethernet block of the AN MMD. */
			PHY_WRITE(sc, BRGPHY_BLOCK_ADDR, BRGPHY_BLOCK_ADDR_MRBE);

			/* Enable MRBE speed autoneg. */
			val = PHY_READ(sc, BRGPHY_MRBE_MSG_PG5_NP);
			val |= BRGPHY_MRBE_MSG_PG5_NP_MBRE |
			    BRGPHY_MRBE_MSG_PG5_NP_T2;
			PHY_WRITE(sc, BRGPHY_MRBE_MSG_PG5_NP, val);

			/* Select the Clause 73 User B0 block of the AN MMD. */
			PHY_WRITE(sc, BRGPHY_BLOCK_ADDR, BRGPHY_BLOCK_ADDR_CL73_USER_B0);

			/* Enable MRBE speed autoneg. */
			PHY_WRITE(sc, BRGPHY_CL73_USER_B0_MBRE_CTL1,
			    BRGPHY_CL73_USER_B0_MBRE_CTL1_NP_AFT_BP |
			    BRGPHY_CL73_USER_B0_MBRE_CTL1_STA_MGR |
			    BRGPHY_CL73_USER_B0_MBRE_CTL1_ANEG);

			/* Restore IEEE0 block (assumed in all brgphy(4) code). */
			PHY_WRITE(sc, BRGPHY_BLOCK_ADDR, BRGPHY_BLOCK_ADDR_COMBO_IEEE0);
        } else if (BCE_CHIP_NUM(bce_sc) == BCE_CHIP_NUM_5709) {
			if ((BCE_CHIP_REV(bce_sc) == BCE_CHIP_REV_Ax) ||
				(BCE_CHIP_REV(bce_sc) == BCE_CHIP_REV_Bx))
				brgphy_fixup_disable_early_dac(sc);

			brgphy_jumbo_settings(sc, ifp->if_mtu);
			brgphy_ethernet_wirespeed(sc);
		} else {
			brgphy_fixup_ber_bug(sc);
			brgphy_jumbo_settings(sc, ifp->if_mtu);
			brgphy_ethernet_wirespeed(sc);
		}
	}
}