d/freebsd-dev
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
496d023db3
freebsd-dev/sys/dev/atkbdc/psm.c

5359 lines
151 KiB
C
Raw Normal View History

Port the ps/2 mouse driver to the alpha.
1998-11-08 18:43:03 +00:00
/*-
* Copyright (c) 1992, 1993 Erik Forsberg.
* Copyright (c) 1996, 1997 Kazutaka YOKOTA.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
*
* THIS SOFTWARE IS PROVIDED BY ``AS IS'' AND ANY EXPRESS OR IMPLIED
* WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
* NO EVENT SHALL I BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
* EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
* PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
* PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
* LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
* NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
/*
* Ported to 386bsd Oct 17, 1992
* Sandi Donno, Computer Science, University of Cape Town, South Africa
* Please send bug reports to sandi@cs.uct.ac.za
*
* Thanks are also due to Rick Macklem, rick@snowhite.cis.uoguelph.ca -
* although I was only partially successful in getting the alpha release
* of his "driver for the Logitech and ATI Inport Bus mice for use with
* 386bsd and the X386 port" to work with my Microsoft mouse, I nevertheless
* found his code to be an invaluable reference when porting this driver
* to 386bsd.
*
* Further modifications for latest 386BSD+patchkit and port to NetBSD,
* Andrew Herbert <andrew@werple.apana.org.au> - 8 June 1993
*
* Cloned from the Microsoft Bus Mouse driver, also by Erik Forsberg, by
* Andrew Herbert - 12 June 1993
*
* Modified for PS/2 mouse by Charles Hannum <mycroft@ai.mit.edu>
* - 13 June 1993
*
* Modified for PS/2 AUX mouse by Shoji Yuen <yuen@nuie.nagoya-u.ac.jp>
* - 24 October 1993
*
* Hardware access routines and probe logic rewritten by
* Kazutaka Yokota <yokota@zodiac.mech.utsunomiya-u.ac.jp>
* - 3, 14, 22 October 1996.
* - 12 November 1996. IOCTLs and rearranging `psmread', `psmioctl'...
* - 14, 30 November 1996. Uses `kbdio.c'.
* - 13 December 1996. Uses queuing version of `kbdio.c'.
Clean up and fix style(9) nits.
2008-04-08 19:09:45 +00:00
* - January/February 1997. Tweaked probe logic for
Port the ps/2 mouse driver to the alpha.
1998-11-08 18:43:03 +00:00
* HiNote UltraII/Latitude/Armada laptops.
* - 30 July 1997. Added APM support.
Clean up and fix style(9) nits.
2008-04-08 19:09:45 +00:00
* - 5 March 1997. Defined driver configuration flags (PSM_CONFIG_XXX).
Port the ps/2 mouse driver to the alpha.
1998-11-08 18:43:03 +00:00
* Improved sync check logic.
* Vendor specific support routines.
*/
Use __FBSDID().
2003-06-11 00:34:37 +00:00
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
- Hook up the new locations of the atkbdc(4), atkbd(4) and psm(4) source files after they were repo-copied to sys/dev/atkbdc. The sources of atkbdc(4) and its children were moved to the new location in preparation for adding an EBus front-end to atkbdc(4) for use on sparc64; i.e. in order to not further scatter them over the whole tree which would have been the result of adding atkbdc_ebus.c in e.g. sys/sparc64/ebus. Another reason for the repo-copies was that some of the sources were misfiled, e.g. sys/isa/atkbd_isa.c wasn't ISA-specific at all but for hanging atkbd(4) off of atkbdc(4) and was renamed to atkbd_atkbdc.c accordingly. Most of sys/isa/psm.c, i.e. expect for its PSMC PNP part, also isn't ISA-specific. - Separate the parts of atkbdc_isa.c which aren't actually ISA-specific but are shareable between different atkbdc(4) bus front-ends into atkbdc_subr.c (repo-copied from atkbdc_isa.c). While here use bus_generic_rl_alloc_resource() and bus_generic_rl_release_resource() respectively in atkbdc_isa.c instead of rolling own versions. - Add sparc64 MD bits to atkbdc(4) and atkbd(4) and an EBus front-end for atkbdc(4). PS/2 controllers and input devices are used on a couple of Sun OEM boards and occur on either the EBus or the ISA bus. Depending on the board it's either the only on-board mean to connect a keyboard and mouse or an alternative to either RS232 or USB devices. - Wrap the PSMC PNP part of psm.c in #ifdef DEV_ISA so it can be compiled without isa(4) (e.g. for EBus-only machines). This ISA-specific part isn't separated into its own source file, yet, as it requires more work than was feasible for 6.0 in order to do it in a clean way. Actually philip@ is working on a rewrite of psm(4) so a more comprehensive clean-up and separation of hardware dependent and independent parts is expected to happen after 6.0. Tested on: i386, sparc64 (AX1105, AXe and AXi boards) Reviewed by: philip
2005-06-10 20:56:38 +00:00
#include "opt_isa.h"
Port the ps/2 mouse driver to the alpha.
1998-11-08 18:43:03 +00:00
#include "opt_psm.h"
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/kernel.h>
#include <sys/module.h>
#include <sys/bus.h>
#include <sys/conf.h>
Teach psm about O_ASYNC This makes Xorg happy if you aren't using moused. MFC after: 3 days
2009-03-16 08:21:51 +00:00
#include <sys/filio.h>
Port the ps/2 mouse driver to the alpha.
1998-11-08 18:43:03 +00:00
#include <sys/poll.h>
Teach psm about O_ASYNC This makes Xorg happy if you aren't using moused. MFC after: 3 days
2009-03-16 08:21:51 +00:00
#include <sys/sigio.h>
#include <sys/signalvar.h>
Port the ps/2 mouse driver to the alpha.
1998-11-08 18:43:03 +00:00
#include <sys/syslog.h>
Bring the 'new-bus' to the i386. This extensively changes the way the i386 platform boots, it is no longer ISA-centric, and is fully dynamic. Most old drivers compile and run without modification via 'compatability shims' to enable a smoother transition. eisa, isapnp and pccard* are not yet using the new resource manager. Once fully converted, all drivers will be loadable, including PCI and ISA. (Some other changes appear to have snuck in, including a port of Soren's ATA driver to the Alpha. Soren, back this out if you need to.) This is a checkpoint of work-in-progress, but is quite functional. The bulk of the work was done over the last few years by Doug Rabson and Garrett Wollman. Approved by: core
1999-04-16 21:22:55 +00:00
#include <machine/bus.h>
* Add hooks to allow the X server to access I/O ports and memory. * Update drivers to the latest version of the bus interface. The ISA drivers' use of the new resource api is minimal. Garrett has some much cleaner drivers which should be more easily shared between i386 and alpha. This has only been tested on cia based machines. It should work on lca and apecs but I might have broken something.
1998-11-15 18:25:17 +00:00
#include <sys/rman.h>
select() DKI is now in <sys/selinfo.h>.
2001-01-09 04:33:49 +00:00
#include <sys/selinfo.h>
Significantly reduce the "jitter" that is typical for PS/2 mice when using a KVM. There is no actual solution possible, but this gets us pretty close. Typically when switching back to a FreeBSD box and moving the mouse wild data is produced, because the protocol's validation/checksum system is extremely weak it is impossible to determine that we're out of sync before dropping several bogus packets to user land. The actual solution that appears to offer the best clamping of jitter is to buffer the mouse packets if we've not seen mouse activity for more than .5 seconds. Then waiting to flush that data for 1/20th of a second. If within that 20th of a second we get any packets that do fail the weak test we drop the entire queue and back off accepting data from the mouse for 2 seconds and then repeat the whole deal. You can still get _some_ jitter, notably if you switch to the FreeBSD box, then move the mouse just enough to generate one or two packets. Those packets may be bogus, but may still pass the validity check. One way to finally kill the problem once and for all is to check the initial packets for "wild" values. Typically one sees packets in the +/-60 range during normal operation, however when bogus data is generated it's typically near the outer range of +/-120 or more, those packets would be a good candidate for dropping or clamping. I've been running with this for several weeks now and it has significantly helped me stay sane even with a piece of junk Belkin KVM causing wild jitter each and every time I switch. Lastly I'd like to note that my experience with Windows shows me that somehow the Microsoft PS/2 driver typically avoids this problem, but that may only be possible when running the mouse in a dumb-ed down PS/2 mode that Belkin recommends on their site.
2003-12-11 11:28:11 +00:00
#include <sys/sysctl.h>
Hack for the "out-of-sync" error. - Count the number of this error. - When the error is detected for the first time, the psm driver will throw few data bytes (up to entire packet size) and see if it can get back to sync. - If the error still persists, the psm driver disable/enable the mouse and see if it works. - If the error still persists and the count goes up to 20, the psm driver reset and reinitialize the mouse. The counter is reset to zero. - It also discards an incomplete data packet when the interval between two consequtive bytes are longer than pre-defined timeout (2 seconds). The last byte which arrived late will be regarded as the first byte of a new packet. This is louie's idea. You may see the following error logs during the above operations: "psmintr: delay too long; resetting byte count" "psmintr: out of sync (%04x != %04x)" "psmintr: discard a byte (%d)" "psmintr: re-enable the mouse" "psmintr: reset the mouse" MFC after: 1 month
2001-10-13 10:28:02 +00:00
#include <sys/time.h>
Port the ps/2 mouse driver to the alpha.
1998-11-08 18:43:03 +00:00
#include <sys/uio.h>
Deprecate machine/limits.h in favor of new sys/limits.h. Change all in-tree consumers to include <sys/limits.h> Discussed on: standards@ Partially submitted by: Craig Rodrigues <rodrigc@attbi.com>
2003-04-29 13:36:06 +00:00
#include <sys/limits.h>
Initiate deorbit burn sequence for <machine/mouse.h>. Replace all in-tree uses with <sys/mouse.h> which repo-copied a few moments ago from src/sys/i386/include/mouse.h by peter. This is also the appropriate fix for exo-tree sources. Put warnings in <machine/mouse.h> to discourage use. November 15th 2000 the warnings will be converted to errors. January 15th 2001 the <machine/mouse.h> files will be removed.
2000-10-09 08:08:36 +00:00
#include <sys/mouse.h>
* Add hooks to allow the X server to access I/O ports and memory. * Update drivers to the latest version of the bus interface. The ISA drivers' use of the new resource api is minimal. Garrett has some much cleaner drivers which should be more easily shared between i386 and alpha. This has only been tested on cia based machines. It should work on lca and apecs but I might have broken something.
1998-11-15 18:25:17 +00:00
#include <machine/resource.h>
Port the ps/2 mouse driver to the alpha.
1998-11-08 18:43:03 +00:00
- Hook up the new locations of the atkbdc(4), atkbd(4) and psm(4) source files after they were repo-copied to sys/dev/atkbdc. The sources of atkbdc(4) and its children were moved to the new location in preparation for adding an EBus front-end to atkbdc(4) for use on sparc64; i.e. in order to not further scatter them over the whole tree which would have been the result of adding atkbdc_ebus.c in e.g. sys/sparc64/ebus. Another reason for the repo-copies was that some of the sources were misfiled, e.g. sys/isa/atkbd_isa.c wasn't ISA-specific at all but for hanging atkbd(4) off of atkbdc(4) and was renamed to atkbd_atkbdc.c accordingly. Most of sys/isa/psm.c, i.e. expect for its PSMC PNP part, also isn't ISA-specific. - Separate the parts of atkbdc_isa.c which aren't actually ISA-specific but are shareable between different atkbdc(4) bus front-ends into atkbdc_subr.c (repo-copied from atkbdc_isa.c). While here use bus_generic_rl_alloc_resource() and bus_generic_rl_release_resource() respectively in atkbdc_isa.c instead of rolling own versions. - Add sparc64 MD bits to atkbdc(4) and atkbd(4) and an EBus front-end for atkbdc(4). PS/2 controllers and input devices are used on a couple of Sun OEM boards and occur on either the EBus or the ISA bus. Depending on the board it's either the only on-board mean to connect a keyboard and mouse or an alternative to either RS232 or USB devices. - Wrap the PSMC PNP part of psm.c in #ifdef DEV_ISA so it can be compiled without isa(4) (e.g. for EBus-only machines). This ISA-specific part isn't separated into its own source file, yet, as it requires more work than was feasible for 6.0 in order to do it in a clean way. Actually philip@ is working on a rewrite of psm(4) so a more comprehensive clean-up and separation of hardware dependent and independent parts is expected to happen after 6.0. Tested on: i386, sparc64 (AX1105, AXe and AXi boards) Reviewed by: philip
2005-06-10 20:56:38 +00:00
#ifdef DEV_ISA
Port the ps/2 mouse driver to the alpha.
1998-11-08 18:43:03 +00:00
#include <isa/isavar.h>
- Hook up the new locations of the atkbdc(4), atkbd(4) and psm(4) source files after they were repo-copied to sys/dev/atkbdc. The sources of atkbdc(4) and its children were moved to the new location in preparation for adding an EBus front-end to atkbdc(4) for use on sparc64; i.e. in order to not further scatter them over the whole tree which would have been the result of adding atkbdc_ebus.c in e.g. sys/sparc64/ebus. Another reason for the repo-copies was that some of the sources were misfiled, e.g. sys/isa/atkbd_isa.c wasn't ISA-specific at all but for hanging atkbd(4) off of atkbdc(4) and was renamed to atkbd_atkbdc.c accordingly. Most of sys/isa/psm.c, i.e. expect for its PSMC PNP part, also isn't ISA-specific. - Separate the parts of atkbdc_isa.c which aren't actually ISA-specific but are shareable between different atkbdc(4) bus front-ends into atkbdc_subr.c (repo-copied from atkbdc_isa.c). While here use bus_generic_rl_alloc_resource() and bus_generic_rl_release_resource() respectively in atkbdc_isa.c instead of rolling own versions. - Add sparc64 MD bits to atkbdc(4) and atkbd(4) and an EBus front-end for atkbdc(4). PS/2 controllers and input devices are used on a couple of Sun OEM boards and occur on either the EBus or the ISA bus. Depending on the board it's either the only on-board mean to connect a keyboard and mouse or an alternative to either RS232 or USB devices. - Wrap the PSMC PNP part of psm.c in #ifdef DEV_ISA so it can be compiled without isa(4) (e.g. for EBus-only machines). This ISA-specific part isn't separated into its own source file, yet, as it requires more work than was feasible for 6.0 in order to do it in a clean way. Actually philip@ is working on a rewrite of psm(4) so a more comprehensive clean-up and separation of hardware dependent and independent parts is expected to happen after 6.0. Tested on: i386, sparc64 (AX1105, AXe and AXi boards) Reviewed by: philip
2005-06-10 20:56:38 +00:00
#endif
#include <dev/atkbdc/atkbdcreg.h>
#include <dev/atkbdc/psm.h>
Port the ps/2 mouse driver to the alpha.
1998-11-08 18:43:03 +00:00
/*
* Driver specific options: the following options may be set by
* `options' statements in the kernel configuration file.
*/
/* debugging */
#ifndef PSM_DEBUG
Clean up and fix style(9) nits.
2008-04-08 19:09:45 +00:00
#define PSM_DEBUG 0 /*
Improve sync recovery algorithm: o Remove PSM_SYNCERR_THRESHOLD1. This value specified how many sync errors were required before the mouse is re-initialised. Re-initialisation is now done after (packetsize * 2) sync errors as things aren't likely to improve after that. o Reset lastinputerror when re-initialisation occurs. We don't want to continue to drop data after re-initialisation. o Count the number of failed packets independently of the syncerrors statistic. syncerrors is useful for recovering sync within a single packet. pkterrors allows us to detect when the mouse changes its packet mode due to some external event (e.g. KVM switch). o Reinitialize the mouse if we see more than psmpkterrthresh errors during the validation period. The validation period begins as soon as a sync error is detected and continues until psmerrsecs/msecs time has elapsed. The defaults for these two values force a reset if we see two packet errors in a 2 second period. This allows rapid detection of packet framing errors caused by the mouse changing packet modes. o Export psmpkterrthresh as a sysctl o Export psmloglevel as a sysctl. o Enable more debugging code to be enabled at runtime via psmloglevel. o Simplify verbose conditioned loging by using a VLOG macro. o Add several comments describing the sync recovery algorithm of this driver. Large Portions by: Brian Somers <brian@Awfulhak.org> Inspired and Frustrated by: Belkin KVMs Reviewed by: njl, philip
2004-08-27 21:25:16 +00:00
* logging: 0: none, 1: brief, 2: verbose
* 3: sync errors, 4: all packets
*/
Hack for the "out-of-sync" error. - Count the number of this error. - When the error is detected for the first time, the psm driver will throw few data bytes (up to entire packet size) and see if it can get back to sync. - If the error still persists, the psm driver disable/enable the mouse and see if it works. - If the error still persists and the count goes up to 20, the psm driver reset and reinitialize the mouse. The counter is reset to zero. - It also discards an incomplete data packet when the interval between two consequtive bytes are longer than pre-defined timeout (2 seconds). The last byte which arrived late will be regarded as the first byte of a new packet. This is louie's idea. You may see the following error logs during the above operations: "psmintr: delay too long; resetting byte count" "psmintr: out of sync (%04x != %04x)" "psmintr: discard a byte (%d)" "psmintr: re-enable the mouse" "psmintr: reset the mouse" MFC after: 1 month
2001-10-13 10:28:02 +00:00
#endif
Clean up and fix style(9) nits.
2008-04-08 19:09:45 +00:00
#define VLOG(level, args) do { \
if (verbose >= level) \
log args; \
Improve sync recovery algorithm: o Remove PSM_SYNCERR_THRESHOLD1. This value specified how many sync errors were required before the mouse is re-initialised. Re-initialisation is now done after (packetsize * 2) sync errors as things aren't likely to improve after that. o Reset lastinputerror when re-initialisation occurs. We don't want to continue to drop data after re-initialisation. o Count the number of failed packets independently of the syncerrors statistic. syncerrors is useful for recovering sync within a single packet. pkterrors allows us to detect when the mouse changes its packet mode due to some external event (e.g. KVM switch). o Reinitialize the mouse if we see more than psmpkterrthresh errors during the validation period. The validation period begins as soon as a sync error is detected and continues until psmerrsecs/msecs time has elapsed. The defaults for these two values force a reset if we see two packet errors in a 2 second period. This allows rapid detection of packet framing errors caused by the mouse changing packet modes. o Export psmpkterrthresh as a sysctl o Export psmloglevel as a sysctl. o Enable more debugging code to be enabled at runtime via psmloglevel. o Simplify verbose conditioned loging by using a VLOG macro. o Add several comments describing the sync recovery algorithm of this driver. Large Portions by: Brian Somers <brian@Awfulhak.org> Inspired and Frustrated by: Belkin KVMs Reviewed by: njl, philip
2004-08-27 21:25:16 +00:00
} while (0)
Hack for the "out-of-sync" error. - Count the number of this error. - When the error is detected for the first time, the psm driver will throw few data bytes (up to entire packet size) and see if it can get back to sync. - If the error still persists, the psm driver disable/enable the mouse and see if it works. - If the error still persists and the count goes up to 20, the psm driver reset and reinitialize the mouse. The counter is reset to zero. - It also discards an incomplete data packet when the interval between two consequtive bytes are longer than pre-defined timeout (2 seconds). The last byte which arrived late will be regarded as the first byte of a new packet. This is louie's idea. You may see the following error logs during the above operations: "psmintr: delay too long; resetting byte count" "psmintr: out of sync (%04x != %04x)" "psmintr: discard a byte (%d)" "psmintr: re-enable the mouse" "psmintr: reset the mouse" MFC after: 1 month
2001-10-13 10:28:02 +00:00
#ifndef PSM_INPUT_TIMEOUT
Clean up and fix style(9) nits.
2008-04-08 19:09:45 +00:00
#define PSM_INPUT_TIMEOUT 2000000 /* 2 sec */
Hack for the "out-of-sync" error. - Count the number of this error. - When the error is detected for the first time, the psm driver will throw few data bytes (up to entire packet size) and see if it can get back to sync. - If the error still persists, the psm driver disable/enable the mouse and see if it works. - If the error still persists and the count goes up to 20, the psm driver reset and reinitialize the mouse. The counter is reset to zero. - It also discards an incomplete data packet when the interval between two consequtive bytes are longer than pre-defined timeout (2 seconds). The last byte which arrived late will be regarded as the first byte of a new packet. This is louie's idea. You may see the following error logs during the above operations: "psmintr: delay too long; resetting byte count" "psmintr: out of sync (%04x != %04x)" "psmintr: discard a byte (%d)" "psmintr: re-enable the mouse" "psmintr: reset the mouse" MFC after: 1 month
2001-10-13 10:28:02 +00:00
#endif
Update support for Synaptics Touchpads (Volume III) o Catch 'taps' as button presses o One finger sends button1, two fingers send button3, three fingers send button2 (double-click) Tested by: many subscribers to -current Approved by: njl
2004-08-08 01:00:31 +00:00
#ifndef PSM_TAP_TIMEOUT
Clean up and fix style(9) nits.
2008-04-08 19:09:45 +00:00
#define PSM_TAP_TIMEOUT 125000
Update support for Synaptics Touchpads (Volume III) o Catch 'taps' as button presses o One finger sends button1, two fingers send button3, three fingers send button2 (double-click) Tested by: many subscribers to -current Approved by: njl
2004-08-08 01:00:31 +00:00
#endif
#ifndef PSM_TAP_THRESHOLD
Clean up and fix style(9) nits.
2008-04-08 19:09:45 +00:00
#define PSM_TAP_THRESHOLD 25
Update support for Synaptics Touchpads (Volume III) o Catch 'taps' as button presses o One finger sends button1, two fingers send button3, three fingers send button2 (double-click) Tested by: many subscribers to -current Approved by: njl
2004-08-08 01:00:31 +00:00
#endif
Port the ps/2 mouse driver to the alpha.
1998-11-08 18:43:03 +00:00
/* end of driver specific options */
Clean up and fix style(9) nits.
2008-04-08 19:09:45 +00:00
#define PSMCPNP_DRIVER_NAME "psmcpnp"
Refine ACPI/PnP BIOS probe/attach routines a bit. - Add workaround for the problematic PnP BIOS which does not assign irq resource for the PS/2 mouse device node; if there is no irq assigned for the PS/2 mouse node, refer to device.hints for an irq number. If we still don't find an irq number in the hints database, use a hard-coded value. - Delete unused ivars. - Bit of clean up in probe/attach. - Add PnP ID for the PS/2 mouse port on some IBM ThinkPad models.
2001-09-15 04:38:20 +00:00
Port the ps/2 mouse driver to the alpha.
1998-11-08 18:43:03 +00:00
/* input queue */
Clean up and fix style(9) nits.
2008-04-08 19:09:45 +00:00
#define PSM_BUFSIZE 960
#define PSM_SMALLBUFSIZE 240
Port the ps/2 mouse driver to the alpha.
1998-11-08 18:43:03 +00:00
/* operation levels */
Clean up and fix style(9) nits.
2008-04-08 19:09:45 +00:00
#define PSM_LEVEL_BASE 0
#define PSM_LEVEL_STANDARD 1
#define PSM_LEVEL_NATIVE 2
#define PSM_LEVEL_MIN PSM_LEVEL_BASE
#define PSM_LEVEL_MAX PSM_LEVEL_NATIVE
Port the ps/2 mouse driver to the alpha.
1998-11-08 18:43:03 +00:00
Improve Logitech MouseMan+ protocol support.
1999-07-12 15:16:14 +00:00
/* Logitech PS2++ protocol */
Clean up and fix style(9) nits.
2008-04-08 19:09:45 +00:00
#define MOUSE_PS2PLUS_CHECKBITS(b) \
((((b[2] & 0x03) << 2) | 0x02) == (b[1] & 0x0f))
#define MOUSE_PS2PLUS_PACKET_TYPE(b) \
(((b[0] & 0x30) >> 2) | ((b[1] & 0x30) >> 4))
Improve Logitech MouseMan+ protocol support.
1999-07-12 15:16:14 +00:00
Port the ps/2 mouse driver to the alpha.
1998-11-08 18:43:03 +00:00
/* ring buffer */
typedef struct ringbuf {
Clean up and fix style(9) nits.
2008-04-08 19:09:45 +00:00
int count; /* # of valid elements in the buffer */
int head; /* head pointer */
int tail; /* tail poiner */
u_char buf[PSM_BUFSIZE];
Port the ps/2 mouse driver to the alpha.
1998-11-08 18:43:03 +00:00
} ringbuf_t;
Significantly reduce the "jitter" that is typical for PS/2 mice when using a KVM. There is no actual solution possible, but this gets us pretty close. Typically when switching back to a FreeBSD box and moving the mouse wild data is produced, because the protocol's validation/checksum system is extremely weak it is impossible to determine that we're out of sync before dropping several bogus packets to user land. The actual solution that appears to offer the best clamping of jitter is to buffer the mouse packets if we've not seen mouse activity for more than .5 seconds. Then waiting to flush that data for 1/20th of a second. If within that 20th of a second we get any packets that do fail the weak test we drop the entire queue and back off accepting data from the mouse for 2 seconds and then repeat the whole deal. You can still get _some_ jitter, notably if you switch to the FreeBSD box, then move the mouse just enough to generate one or two packets. Those packets may be bogus, but may still pass the validity check. One way to finally kill the problem once and for all is to check the initial packets for "wild" values. Typically one sees packets in the +/-60 range during normal operation, however when bogus data is generated it's typically near the outer range of +/-120 or more, those packets would be a good candidate for dropping or clamping. I've been running with this for several weeks now and it has significantly helped me stay sane even with a piece of junk Belkin KVM causing wild jitter each and every time I switch. Lastly I'd like to note that my experience with Windows shows me that somehow the Microsoft PS/2 driver typically avoids this problem, but that may only be possible when running the mouse in a dumb-ed down PS/2 mode that Belkin recommends on their site.
2003-12-11 11:28:11 +00:00
/* data buffer */
typedef struct packetbuf {
Clean up and fix style(9) nits.
2008-04-08 19:09:45 +00:00
u_char ipacket[16]; /* interim input buffer */
int inputbytes; /* # of bytes in the input buffer */
Significantly reduce the "jitter" that is typical for PS/2 mice when using a KVM. There is no actual solution possible, but this gets us pretty close. Typically when switching back to a FreeBSD box and moving the mouse wild data is produced, because the protocol's validation/checksum system is extremely weak it is impossible to determine that we're out of sync before dropping several bogus packets to user land. The actual solution that appears to offer the best clamping of jitter is to buffer the mouse packets if we've not seen mouse activity for more than .5 seconds. Then waiting to flush that data for 1/20th of a second. If within that 20th of a second we get any packets that do fail the weak test we drop the entire queue and back off accepting data from the mouse for 2 seconds and then repeat the whole deal. You can still get _some_ jitter, notably if you switch to the FreeBSD box, then move the mouse just enough to generate one or two packets. Those packets may be bogus, but may still pass the validity check. One way to finally kill the problem once and for all is to check the initial packets for "wild" values. Typically one sees packets in the +/-60 range during normal operation, however when bogus data is generated it's typically near the outer range of +/-120 or more, those packets would be a good candidate for dropping or clamping. I've been running with this for several weeks now and it has significantly helped me stay sane even with a piece of junk Belkin KVM causing wild jitter each and every time I switch. Lastly I'd like to note that my experience with Windows shows me that somehow the Microsoft PS/2 driver typically avoids this problem, but that may only be possible when running the mouse in a dumb-ed down PS/2 mode that Belkin recommends on their site.
2003-12-11 11:28:11 +00:00
} packetbuf_t;
#ifndef PSM_PACKETQUEUE
Clean up and fix style(9) nits.
2008-04-08 19:09:45 +00:00
#define PSM_PACKETQUEUE 128
Significantly reduce the "jitter" that is typical for PS/2 mice when using a KVM. There is no actual solution possible, but this gets us pretty close. Typically when switching back to a FreeBSD box and moving the mouse wild data is produced, because the protocol's validation/checksum system is extremely weak it is impossible to determine that we're out of sync before dropping several bogus packets to user land. The actual solution that appears to offer the best clamping of jitter is to buffer the mouse packets if we've not seen mouse activity for more than .5 seconds. Then waiting to flush that data for 1/20th of a second. If within that 20th of a second we get any packets that do fail the weak test we drop the entire queue and back off accepting data from the mouse for 2 seconds and then repeat the whole deal. You can still get _some_ jitter, notably if you switch to the FreeBSD box, then move the mouse just enough to generate one or two packets. Those packets may be bogus, but may still pass the validity check. One way to finally kill the problem once and for all is to check the initial packets for "wild" values. Typically one sees packets in the +/-60 range during normal operation, however when bogus data is generated it's typically near the outer range of +/-120 or more, those packets would be a good candidate for dropping or clamping. I've been running with this for several weeks now and it has significantly helped me stay sane even with a piece of junk Belkin KVM causing wild jitter each and every time I switch. Lastly I'd like to note that my experience with Windows shows me that somehow the Microsoft PS/2 driver typically avoids this problem, but that may only be possible when running the mouse in a dumb-ed down PS/2 mode that Belkin recommends on their site.
2003-12-11 11:28:11 +00:00
#endif
Rewrite Synaptics touchpads support with the following goals in mind: o better quality of the movement smoothing o more features such as tap-hold and virtual scrolling Support must still be enabled with this line in your /boot/loader.conf: hw.psm.synaptics_support="1" The following sysctls were removed: hw.psm.synaptics.low_speed_threshold hw.psm.synaptics.min_movement hw.psm.synaptics.squelch_level An overview of this new driver and a short documentation about the added sysctls is available on the wiki: http://wiki.freebsd.org/SynapticsTouchpad
2008-10-14 17:48:36 +00:00
enum {
SYNAPTICS_SYSCTL_MIN_PRESSURE,
SYNAPTICS_SYSCTL_MAX_PRESSURE,
SYNAPTICS_SYSCTL_MAX_WIDTH,
SYNAPTICS_SYSCTL_MARGIN_TOP,
SYNAPTICS_SYSCTL_MARGIN_RIGHT,
SYNAPTICS_SYSCTL_MARGIN_BOTTOM,
SYNAPTICS_SYSCTL_MARGIN_LEFT,
SYNAPTICS_SYSCTL_NA_TOP,
SYNAPTICS_SYSCTL_NA_RIGHT,
SYNAPTICS_SYSCTL_NA_BOTTOM,
SYNAPTICS_SYSCTL_NA_LEFT,
SYNAPTICS_SYSCTL_WINDOW_MIN,
SYNAPTICS_SYSCTL_WINDOW_MAX,
SYNAPTICS_SYSCTL_MULTIPLICATOR,
SYNAPTICS_SYSCTL_WEIGHT_CURRENT,
SYNAPTICS_SYSCTL_WEIGHT_PREVIOUS,
SYNAPTICS_SYSCTL_WEIGHT_PREVIOUS_NA,
SYNAPTICS_SYSCTL_WEIGHT_LEN_SQUARED,
SYNAPTICS_SYSCTL_DIV_MIN,
SYNAPTICS_SYSCTL_DIV_MAX,
SYNAPTICS_SYSCTL_DIV_MAX_NA,
SYNAPTICS_SYSCTL_DIV_LEN,
SYNAPTICS_SYSCTL_TAP_MAX_DELTA,
SYNAPTICS_SYSCTL_TAP_MIN_QUEUE,
SYNAPTICS_SYSCTL_TAPHOLD_TIMEOUT,
SYNAPTICS_SYSCTL_VSCROLL_HOR_AREA,
SYNAPTICS_SYSCTL_VSCROLL_VER_AREA,
SYNAPTICS_SYSCTL_VSCROLL_MIN_DELTA,
SYNAPTICS_SYSCTL_VSCROLL_DIV_MIN,
Add support for controlling the trackpoint when Synaptics is enabled. To accomplish this, we must put the Synaptics hardware in passthrough mode when talking to the trackpoint. I only performed minor style modifications. Submitted by: Jan Kokemüller <jan.kokemueller at gmail.com> MFC after: 1 week
2015-04-11 18:45:22 +00:00
SYNAPTICS_SYSCTL_VSCROLL_DIV_MAX,
SYNAPTICS_SYSCTL_TOUCHPAD_OFF
Rewrite Synaptics touchpads support with the following goals in mind: o better quality of the movement smoothing o more features such as tap-hold and virtual scrolling Support must still be enabled with this line in your /boot/loader.conf: hw.psm.synaptics_support="1" The following sysctls were removed: hw.psm.synaptics.low_speed_threshold hw.psm.synaptics.min_movement hw.psm.synaptics.squelch_level An overview of this new driver and a short documentation about the added sysctls is available on the wiki: http://wiki.freebsd.org/SynapticsTouchpad
2008-10-14 17:48:36 +00:00
};
Make life for owners of Synaptics Touchpads more pleasant :-) o Implement a shiny new algorithm to keep track of finger movement at slow speeds. This dramatically reduces the level of questionable language from users trying to resize windows. o Properly catch the many extra buttons and dials which manufacturers are known to screw onto Synaptics touchpad controllers. Currently, up to seven buttons are known to work, more should work too. o Add a number of sysctls allowing one to tune the driver to taste in a simple way: # Should the extra buttons act as axes or as middle button hw.psm.synaptics.directional_scrolls # These control the 'stickiness' at low speeds hw.psm.synaptics.low_speed_threshold hw.psm.synaptics.min_movement hw.psm.synaptics.squelch_level PR: kern/75725 Submitted by: Jason Kuri <jay@oneway.com> MFC after: 1 month
2005-01-10 13:05:58 +00:00
typedef struct synapticsinfo {
Rewrite Synaptics touchpads support with the following goals in mind: o better quality of the movement smoothing o more features such as tap-hold and virtual scrolling Support must still be enabled with this line in your /boot/loader.conf: hw.psm.synaptics_support="1" The following sysctls were removed: hw.psm.synaptics.low_speed_threshold hw.psm.synaptics.min_movement hw.psm.synaptics.squelch_level An overview of this new driver and a short documentation about the added sysctls is available on the wiki: http://wiki.freebsd.org/SynapticsTouchpad
2008-10-14 17:48:36 +00:00
struct sysctl_ctx_list sysctl_ctx;
Clean up and fix style(9) nits.
2008-04-08 19:09:45 +00:00
struct sysctl_oid *sysctl_tree;
Rewrite Synaptics touchpads support with the following goals in mind: o better quality of the movement smoothing o more features such as tap-hold and virtual scrolling Support must still be enabled with this line in your /boot/loader.conf: hw.psm.synaptics_support="1" The following sysctls were removed: hw.psm.synaptics.low_speed_threshold hw.psm.synaptics.min_movement hw.psm.synaptics.squelch_level An overview of this new driver and a short documentation about the added sysctls is available on the wiki: http://wiki.freebsd.org/SynapticsTouchpad
2008-10-14 17:48:36 +00:00
int directional_scrolls;
Improve Synaptics support for newer touchpads. Enable two finger scrolling by default and disable the edge scrolling if the touchpad has no physical zone for it. Disable directional scrolling by default to avoid using extended buttons as scroll buttons. Add support for ClickPad. On Lenovo laptops, this is the button reported when one presses the touchpad. While there, fix a problem where the extended buttons were not reporting the button release event correctly: we need to save the state of the buttons and report it to sysmouse until we receive a packet from the touchpad indicating the button has been released. This makes it possible to use an extended button to resize a window. On Lenovo laptops, the major buttons are actually reported as extended buttons. Tested by: many (current@) MFC after: 1 week
2015-04-11 18:44:07 +00:00
int two_finger_scroll;
Rewrite Synaptics touchpads support with the following goals in mind: o better quality of the movement smoothing o more features such as tap-hold and virtual scrolling Support must still be enabled with this line in your /boot/loader.conf: hw.psm.synaptics_support="1" The following sysctls were removed: hw.psm.synaptics.low_speed_threshold hw.psm.synaptics.min_movement hw.psm.synaptics.squelch_level An overview of this new driver and a short documentation about the added sysctls is available on the wiki: http://wiki.freebsd.org/SynapticsTouchpad
2008-10-14 17:48:36 +00:00
int min_pressure;
int max_pressure;
int max_width;
int margin_top;
int margin_right;
int margin_bottom;
int margin_left;
int na_top;
int na_right;
int na_bottom;
int na_left;
int window_min;
int window_max;
int multiplicator;
int weight_current;
int weight_previous;
int weight_previous_na;
int weight_len_squared;
int div_min;
int div_max;
int div_max_na;
int div_len;
int tap_max_delta;
int tap_min_queue;
int taphold_timeout;
int vscroll_ver_area;
int vscroll_hor_area;
int vscroll_min_delta;
int vscroll_div_min;
int vscroll_div_max;
Add support for controlling the trackpoint when Synaptics is enabled. To accomplish this, we must put the Synaptics hardware in passthrough mode when talking to the trackpoint. I only performed minor style modifications. Submitted by: Jan Kokemüller <jan.kokemueller at gmail.com> MFC after: 1 week
2015-04-11 18:45:22 +00:00
int touchpad_off;
Make life for owners of Synaptics Touchpads more pleasant :-) o Implement a shiny new algorithm to keep track of finger movement at slow speeds. This dramatically reduces the level of questionable language from users trying to resize windows. o Properly catch the many extra buttons and dials which manufacturers are known to screw onto Synaptics touchpad controllers. Currently, up to seven buttons are known to work, more should work too. o Add a number of sysctls allowing one to tune the driver to taste in a simple way: # Should the extra buttons act as axes or as middle button hw.psm.synaptics.directional_scrolls # These control the 'stickiness' at low speeds hw.psm.synaptics.low_speed_threshold hw.psm.synaptics.min_movement hw.psm.synaptics.squelch_level PR: kern/75725 Submitted by: Jason Kuri <jay@oneway.com> MFC after: 1 month
2005-01-10 13:05:58 +00:00
} synapticsinfo_t;
Rewrite Synaptics touchpads support with the following goals in mind: o better quality of the movement smoothing o more features such as tap-hold and virtual scrolling Support must still be enabled with this line in your /boot/loader.conf: hw.psm.synaptics_support="1" The following sysctls were removed: hw.psm.synaptics.low_speed_threshold hw.psm.synaptics.min_movement hw.psm.synaptics.squelch_level An overview of this new driver and a short documentation about the added sysctls is available on the wiki: http://wiki.freebsd.org/SynapticsTouchpad
2008-10-14 17:48:36 +00:00
typedef struct synapticspacket {
int x;
int y;
} synapticspacket_t;
#define SYNAPTICS_PACKETQUEUE 10
#define SYNAPTICS_QUEUE_CURSOR(x) \
(x + SYNAPTICS_PACKETQUEUE) % SYNAPTICS_PACKETQUEUE
psm: Support detection of Synaptics touchpad v7.5 and above Starting with firmware v7.5, the "Read TouchPad Modes" ($01) and "Read Capabilities" ($02) commands changed: previously constant bytes now carry variable information. We now compare those bytes to expected constants only for firmware prior to v7.5. Tested by: Zeus Panchenko <zeus@gnu.org.ua> MFC after: 1 week
2012-12-18 20:02:53 +00:00
#define SYNAPTICS_VERSION_GE(synhw, major, minor) \
((synhw).infoMajor > (major) || \
((synhw).infoMajor == (major) && (synhw).infoMinor >= (minor)))
Rewrite Synaptics touchpads support with the following goals in mind: o better quality of the movement smoothing o more features such as tap-hold and virtual scrolling Support must still be enabled with this line in your /boot/loader.conf: hw.psm.synaptics_support="1" The following sysctls were removed: hw.psm.synaptics.low_speed_threshold hw.psm.synaptics.min_movement hw.psm.synaptics.squelch_level An overview of this new driver and a short documentation about the added sysctls is available on the wiki: http://wiki.freebsd.org/SynapticsTouchpad
2008-10-14 17:48:36 +00:00
typedef struct synapticsaction {
synapticspacket_t queue[SYNAPTICS_PACKETQUEUE];
int queue_len;
int queue_cursor;
int window_min;
int start_x;
int start_y;
int avg_dx;
int avg_dy;
int squelch_x;
int squelch_y;
int fingers_nb;
int tap_button;
int in_taphold;
int in_vscroll;
} synapticsaction_t;
Add preliminary support for IBM/Lenovo TrackPoint. PR: kern/147237 (based on the initial patch for 8.x) Tested by: glebius (device detection and suspend/resume) MFC after: 1 month
2013-03-18 23:22:47 +00:00
enum {
TRACKPOINT_SYSCTL_SENSITIVITY,
TRACKPOINT_SYSCTL_NEGATIVE_INERTIA,
TRACKPOINT_SYSCTL_UPPER_PLATEAU,
TRACKPOINT_SYSCTL_BACKUP_RANGE,
TRACKPOINT_SYSCTL_DRAG_HYSTERESIS,
TRACKPOINT_SYSCTL_MINIMUM_DRAG,
TRACKPOINT_SYSCTL_UP_THRESHOLD,
TRACKPOINT_SYSCTL_THRESHOLD,
TRACKPOINT_SYSCTL_JENKS_CURVATURE,
TRACKPOINT_SYSCTL_Z_TIME,
TRACKPOINT_SYSCTL_PRESS_TO_SELECT,
TRACKPOINT_SYSCTL_SKIP_BACKUPS
};
typedef struct trackpointinfo {
struct sysctl_ctx_list sysctl_ctx;
struct sysctl_oid *sysctl_tree;
int sensitivity;
int inertia;
int uplateau;
int reach;
int draghys;
int mindrag;
int upthresh;
int threshold;
int jenks;
int ztime;
int pts;
int skipback;
} trackpointinfo_t;
Port the ps/2 mouse driver to the alpha.
1998-11-08 18:43:03 +00:00
/* driver control block */
struct psm_softc { /* Driver status information */
Clean up and fix style(9) nits.
2008-04-08 19:09:45 +00:00
int unit;
struct selinfo rsel; /* Process selecting for Input */
u_char state; /* Mouse driver state */
int config; /* driver configuration flags */
int flags; /* other flags */
KBDC kbdc; /* handle to access kbd controller */
struct resource *intr; /* IRQ resource */
void *ih; /* interrupt handle */
mousehw_t hw; /* hardware information */
synapticshw_t synhw; /* Synaptics hardware information */
synapticsinfo_t syninfo; /* Synaptics configuration */
Rewrite Synaptics touchpads support with the following goals in mind: o better quality of the movement smoothing o more features such as tap-hold and virtual scrolling Support must still be enabled with this line in your /boot/loader.conf: hw.psm.synaptics_support="1" The following sysctls were removed: hw.psm.synaptics.low_speed_threshold hw.psm.synaptics.min_movement hw.psm.synaptics.squelch_level An overview of this new driver and a short documentation about the added sysctls is available on the wiki: http://wiki.freebsd.org/SynapticsTouchpad
2008-10-14 17:48:36 +00:00
synapticsaction_t synaction; /* Synaptics action context */
Add preliminary support for IBM/Lenovo TrackPoint. PR: kern/147237 (based on the initial patch for 8.x) Tested by: glebius (device detection and suspend/resume) MFC after: 1 month
2013-03-18 23:22:47 +00:00
int tphw; /* TrackPoint hardware information */
trackpointinfo_t tpinfo; /* TrackPoint configuration */
Clean up and fix style(9) nits.
2008-04-08 19:09:45 +00:00
mousemode_t mode; /* operation mode */
mousemode_t dflt_mode; /* default operation mode */
mousestatus_t status; /* accumulated mouse movement */
ringbuf_t queue; /* mouse status queue */
packetbuf_t pqueue[PSM_PACKETQUEUE]; /* mouse data queue */
int pqueue_start; /* start of data in queue */
int pqueue_end; /* end of data in queue */
int button; /* the latest button state */
int xold; /* previous absolute X position */
int yold; /* previous absolute Y position */
int xaverage; /* average X position */
int yaverage; /* average Y position */
int squelch; /* level to filter movement at low speed */
int zmax; /* maximum pressure value for touchpads */
int syncerrors; /* # of bytes discarded to synchronize */
int pkterrors; /* # of packets failed during quaranteen. */
struct timeval inputtimeout;
struct timeval lastsoftintr; /* time of last soft interrupt */
struct timeval lastinputerr; /* time last sync error happened */
struct timeval taptimeout; /* tap timeout for touchpads */
int watchdog; /* watchdog timer flag */
Use callout(9) instead of timeout(9) to manage timers.
2012-09-07 19:42:36 +00:00
struct callout callout; /* watchdog timer call out */
struct callout softcallout; /* buffer timer call out */
Clean up and fix style(9) nits.
2008-04-08 19:09:45 +00:00
struct cdev *dev;
struct cdev *bdev;
int lasterr;
int cmdcount;
Teach psm about O_ASYNC This makes Xorg happy if you aren't using moused. MFC after: 3 days
2009-03-16 08:21:51 +00:00
struct sigio *async; /* Processes waiting for SIGIO */
Improve Synaptics support for newer touchpads. Enable two finger scrolling by default and disable the edge scrolling if the touchpad has no physical zone for it. Disable directional scrolling by default to avoid using extended buttons as scroll buttons. Add support for ClickPad. On Lenovo laptops, this is the button reported when one presses the touchpad. While there, fix a problem where the extended buttons were not reporting the button release event correctly: we need to save the state of the buttons and report it to sysmouse until we receive a packet from the touchpad indicating the button has been released. This makes it possible to use an extended button to resize a window. On Lenovo laptops, the major buttons are actually reported as extended buttons. Tested by: many (current@) MFC after: 1 week
2015-04-11 18:44:07 +00:00
int extended_buttons;
Port the ps/2 mouse driver to the alpha.
1998-11-08 18:43:03 +00:00
};
Fix some easy, global, lint warnings. In most cases, this means making some local variables static. In a couple of cases, this means removing an unused variable.
2003-04-30 12:57:40 +00:00
static devclass_t psm_devclass;
Port the ps/2 mouse driver to the alpha.
1998-11-08 18:43:03 +00:00
/* driver state flags (state) */
Clean up and fix style(9) nits.
2008-04-08 19:09:45 +00:00
#define PSM_VALID 0x80
#define PSM_OPEN 1 /* Device is open */
#define PSM_ASLP 2 /* Waiting for mouse data */
#define PSM_SOFTARMED 4 /* Software interrupt armed */
#define PSM_NEED_SYNCBITS 8 /* Set syncbits using next data pkt */
Port the ps/2 mouse driver to the alpha.
1998-11-08 18:43:03 +00:00
/* driver configuration flags (config) */
Clean up and fix style(9) nits.
2008-04-08 19:09:45 +00:00
#define PSM_CONFIG_RESOLUTION 0x000f /* resolution */
#define PSM_CONFIG_ACCEL 0x00f0 /* acceleration factor */
#define PSM_CONFIG_NOCHECKSYNC 0x0100 /* disable sync. test */
#define PSM_CONFIG_NOIDPROBE 0x0200 /* disable mouse model probe */
#define PSM_CONFIG_NORESET 0x0400 /* don't reset the mouse */
#define PSM_CONFIG_FORCETAP 0x0800 /* assume `tap' action exists */
#define PSM_CONFIG_IGNPORTERROR 0x1000 /* ignore error in aux port test */
#define PSM_CONFIG_HOOKRESUME 0x2000 /* hook the system resume event */
#define PSM_CONFIG_INITAFTERSUSPEND 0x4000 /* init the device at the resume event */
#define PSM_CONFIG_FLAGS \
(PSM_CONFIG_RESOLUTION | \
PSM_CONFIG_ACCEL | \
PSM_CONFIG_NOCHECKSYNC | \
PSM_CONFIG_NOIDPROBE | \
PSM_CONFIG_NORESET | \
PSM_CONFIG_FORCETAP | \
PSM_CONFIG_IGNPORTERROR | \
PSM_CONFIG_HOOKRESUME | \
PSM_CONFIG_INITAFTERSUSPEND)
Port the ps/2 mouse driver to the alpha.
1998-11-08 18:43:03 +00:00
/* other flags (flags) */
Clean up and fix style(9) nits.
2008-04-08 19:09:45 +00:00
#define PSM_FLAGS_FINGERDOWN 0x0001 /* VersaPad finger down */
Port the ps/2 mouse driver to the alpha.
1998-11-08 18:43:03 +00:00
Quirk based support of Chromebook keyboard found in Acer C720 This probably supports other devices based on SeaBIOS, which need to be added to the smbios based quirks table. The functionality has been ported from DragonFlyBSD and adapted to FreeBSD's more general purpose environment. Devices not covered by a quirk shouldn't be affected at all. Thanks to jhb and kostikbel for reviewing the code. Reviewed by: kostikbel, jhb Approved by: jhb, kostikbel Differential Revision: https://reviews.freebsd.org/D1802
2015-02-14 22:12:17 +00:00
#define kbdcp(p) ((atkbdc_softc_t *)(p))
#define ALWAYS_RESTORE_CONTROLLER(kbdc) !(kbdcp(kbdc)->quirks \
& KBDC_QUIRK_KEEP_ACTIVATED)
Introduce a tunable to disable support for Synaptics touchpads. A number of people have reported problems (stickyness, aiming difficulty) which is proving difficult to fix, so this will default to disable until sometime after 5.3R. To enable Synaptics support, set the 'hw.psm.synaptics_support=1' tunable. MT5 candidate. Approved by: njl
2004-09-29 23:49:57 +00:00
/* Tunables */
Add new "hw.psm.tap_enabled" tunable and sysctl. This tunable allows one to enable (1) or disable (0) gestures like tap and tap-hold on Synaptics TouchPad when the Extended mode isn't enabled (ie. "hw.psm.synaptics_support" not set). By default, the value is -1 in order to keep the current behaviour of not enabling/disabling gestures explicitly. PR: kern/139272 Submitted by: David Horn <dhorn2000 AT gmail DOT com> Reviewed by: David Horn <dhorn2000 AT gmail DOT com>
2009-12-18 17:46:57 +00:00
static int tap_enabled = -1;
TUNABLE_INT("hw.psm.tap_enabled", &tap_enabled);
Revert r255152: It turns out that synaptics_support was turned off by default because its probing method is too intrusive not because it was unstable. Once this is fixed it should be enabled once again. Reported by: delphij, jkim
2013-09-04 18:42:05 +00:00
static int synaptics_support = 0;
Introduce a tunable to disable support for Synaptics touchpads. A number of people have reported problems (stickyness, aiming difficulty) which is proving difficult to fix, so this will default to disable until sometime after 5.3R. To enable Synaptics support, set the 'hw.psm.synaptics_support=1' tunable. MT5 candidate. Approved by: njl
2004-09-29 23:49:57 +00:00
TUNABLE_INT("hw.psm.synaptics_support", &synaptics_support);
Revert r255152: It turns out that synaptics_support was turned off by default because its probing method is too intrusive not because it was unstable. Once this is fixed it should be enabled once again. Reported by: delphij, jkim
2013-09-04 18:42:05 +00:00
static int trackpoint_support = 0;
Add preliminary support for IBM/Lenovo TrackPoint. PR: kern/147237 (based on the initial patch for 8.x) Tested by: glebius (device detection and suspend/resume) MFC after: 1 month
2013-03-18 23:22:47 +00:00
TUNABLE_INT("hw.psm.trackpoint_support", &trackpoint_support);
Reduce diffs to work in progress before checking in serious changes. o Move the sysctls under debug.psm.* and hw.psm.* making them a bit clearer and more consistent with other drivers. o Remove the debug.psm_soft_timeout sysctl. It was introduced many moons ago in r1.64 but never referenced anywhere. o Introduce hw.psm.tap_threshold and hw.psm.tap_timeout to control the behaviour of taps on touchpads. People might like to fiddle with these if tapping seems to slow or too fast for them. o Add debug.psm.loglevel as a tunable so that verbosity can be set easily at boot-time (to watch probes and such) without having to compile a kernel with options PSM_DEBUG=N.
2005-01-03 13:19:49 +00:00
static int verbose = PSM_DEBUG;
TUNABLE_INT("debug.psm.loglevel", &verbose);
Port the ps/2 mouse driver to the alpha.
1998-11-08 18:43:03 +00:00
/* for backward compatibility */
Clean up and fix style(9) nits.
2008-04-08 19:09:45 +00:00
#define OLD_MOUSE_GETHWINFO _IOR('M', 1, old_mousehw_t)
#define OLD_MOUSE_GETMODE _IOR('M', 2, old_mousemode_t)
#define OLD_MOUSE_SETMODE _IOW('M', 3, old_mousemode_t)
Port the ps/2 mouse driver to the alpha.
1998-11-08 18:43:03 +00:00
typedef struct old_mousehw {
Clean up and fix style(9) nits.
2008-04-08 19:09:45 +00:00
int buttons;
int iftype;
int type;
int hwid;
Port the ps/2 mouse driver to the alpha.
1998-11-08 18:43:03 +00:00
} old_mousehw_t;
typedef struct old_mousemode {
Clean up and fix style(9) nits.
2008-04-08 19:09:45 +00:00
int protocol;
int rate;
int resolution;
int accelfactor;
Port the ps/2 mouse driver to the alpha.
1998-11-08 18:43:03 +00:00
} old_mousemode_t;
/* packet formatting function */
Clean up and fix style(9) nits.
2008-04-08 19:09:45 +00:00
typedef int packetfunc_t(struct psm_softc *, u_char *, int *, int,
mousestatus_t *);
Port the ps/2 mouse driver to the alpha.
1998-11-08 18:43:03 +00:00
/* function prototypes */
Clean up and fix style(9) nits.
2008-04-08 19:09:45 +00:00
static void psmidentify(driver_t *, device_t);
static int psmprobe(device_t);
static int psmattach(device_t);
static int psmdetach(device_t);
static int psmresume(device_t);
static d_open_t psmopen;
static d_close_t psmclose;
static d_read_t psmread;
static d_write_t psmwrite;
static d_ioctl_t psmioctl;
static d_poll_t psmpoll;
static int enable_aux_dev(KBDC);
static int disable_aux_dev(KBDC);
static int get_mouse_status(KBDC, int *, int, int);
static int get_aux_id(KBDC);
static int set_mouse_sampling_rate(KBDC, int);
static int set_mouse_scaling(KBDC, int);
static int set_mouse_resolution(KBDC, int);
static int set_mouse_mode(KBDC);
static int get_mouse_buttons(KBDC);
static int is_a_mouse(int);
static void recover_from_error(KBDC);
static int restore_controller(KBDC, int);
static int doinitialize(struct psm_softc *, mousemode_t *);
static int doopen(struct psm_softc *, int);
static int reinitialize(struct psm_softc *, int);
static char *model_name(int);
static void psmsoftintr(void *);
static void psmintr(void *);
static void psmtimeout(void *);
static int timeelapsed(const struct timeval *, int, int,
const struct timeval *);
static void dropqueue(struct psm_softc *);
static void flushpackets(struct psm_softc *);
static void proc_mmanplus(struct psm_softc *, packetbuf_t *,
mousestatus_t *, int *, int *, int *);
static int proc_synaptics(struct psm_softc *, packetbuf_t *,
mousestatus_t *, int *, int *, int *);
static void proc_versapad(struct psm_softc *, packetbuf_t *,
mousestatus_t *, int *, int *, int *);
static int tame_mouse(struct psm_softc *, packetbuf_t *, mousestatus_t *,
u_char *);
Port the ps/2 mouse driver to the alpha.
1998-11-08 18:43:03 +00:00
/* vendor specific features */
Unbreak mouse on resume on Thinkpads when hw.psm.trackpoint_support=0, which is default. It was broken in r281441. It appears that set_trackpoint_parameters() call on resume disables the mouse. So, we need not call it on resume if hw.psm.trackpoint_support=0. The problem is that the probe functions are used both for probing and for reiniting on resume. And the absense of the softc parameter is used as a mark to distinguish reinit and probe, which is quite ugly. At the same time the softc parameter is needed to call set_trackpoint_parameters(). o Change the arguments of probefunc_t to always supply the softc, and use additional enum argument to tell probing from initing. o Don't call set_trackpoint_parameters() from global doinitialize(), instead call it from the enable_trackpoint() only. o In enable_synaptics() call enable_trackpoint() in both probe and reinit cases. Together with: Jan Kokemüller <jan.kokemueller gmail.com>
2015-06-12 13:57:04 +00:00
enum probearg { PROBE, REINIT };
typedef int probefunc_t(struct psm_softc *, enum probearg);
Clean up and fix style(9) nits.
2008-04-08 19:09:45 +00:00
static int mouse_id_proc1(KBDC, int, int, int *);
static int mouse_ext_command(KBDC, int);
static probefunc_t enable_groller;
static probefunc_t enable_gmouse;
static probefunc_t enable_aglide;
static probefunc_t enable_kmouse;
static probefunc_t enable_msexplorer;
static probefunc_t enable_msintelli;
static probefunc_t enable_4dmouse;
static probefunc_t enable_4dplus;
static probefunc_t enable_mmanplus;
static probefunc_t enable_synaptics;
Add preliminary support for IBM/Lenovo TrackPoint. PR: kern/147237 (based on the initial patch for 8.x) Tested by: glebius (device detection and suspend/resume) MFC after: 1 month
2013-03-18 23:22:47 +00:00
static probefunc_t enable_trackpoint;
Clean up and fix style(9) nits.
2008-04-08 19:09:45 +00:00
static probefunc_t enable_versapad;
Port the ps/2 mouse driver to the alpha.
1998-11-08 18:43:03 +00:00
Add support for controlling the trackpoint when Synaptics is enabled. To accomplish this, we must put the Synaptics hardware in passthrough mode when talking to the trackpoint. I only performed minor style modifications. Submitted by: Jan Kokemüller <jan.kokemueller at gmail.com> MFC after: 1 week
2015-04-11 18:45:22 +00:00
static void set_trackpoint_parameters(struct psm_softc *sc);
static void synaptics_passthrough_on(struct psm_softc *sc);
static void synaptics_passthrough_off(struct psm_softc *sc);
synaptics: more support for semi-MT trackpads. Several improvements to the Synaptics driver to support semi-multitouch trackpads and some other fixes: - Two finger scrolling support for "semi-MT" touchpads. Those include many of the older Synaptics touchpads before "true" multitouch support (indicated by capMultiFinger). Semi-MT touchpads can report a second finger position, but the X or Y coordinate may be swapped with some coordinate of the first finger. This is a result of how the hardware works internally. Therefore, all that can be reliably extracted is the bounding box of the two finger positions. Semi-MT touchpads can be recognized by the capAdvancedGestures capability bit. After setting the mode byte, advanced gestures mode has to be enabled. Then, data packets compatible with the capMultiFinger format are sent, so the same two finger scrolling code can be leveraged. Enabling advanced gestures mode on true multitouch touchpads should be harmless. Linux seems to always enable advanced gestures mode. - Put mode setting logic into own functions synaptics_preferred_mode() and synaptics_set_mode() to have this in one place. synaptics_passthrough_on() and synaptics_passthrough_off() currently always use 0xc1 as the mode byte, which may be wrong for touchpads that don't have capExtended. - Expose X and Y resolution of touchpad to userland. Also expose minimum and maximum X and Y coordinates. This is useful for programs in userspace that read raw PSM packets (with PSM_LEVEL_NATIVE enabled) and need to interpret the coordinates. - Also send "extended w mode" packets (see section 3.2.9 of 511-000275-01_RevB.pdf) to userspace if PSM_LEVEL_NATIVE is enabled. This is useful for userspace programs/drivers such as xf86-input-synaptics that can handle these packets. - Fix parsing of nExtendedQueries, and request extended/continued capability bits depending on this value. - capReportsMax, capClearPad, capAdvancedGestures and capCoveredPad must be extracted from status[0] and not status[2], I think. Submitted by: Jan Kokemüller jan.kokemueller at gmail.com
2015-05-10 20:36:57 +00:00
static int synaptics_preferred_mode(struct psm_softc *sc);
static void synaptics_set_mode(struct psm_softc *sc, int mode_byte);
Add support for controlling the trackpoint when Synaptics is enabled. To accomplish this, we must put the Synaptics hardware in passthrough mode when talking to the trackpoint. I only performed minor style modifications. Submitted by: Jan Kokemüller <jan.kokemueller at gmail.com> MFC after: 1 week
2015-04-11 18:45:22 +00:00
Port the ps/2 mouse driver to the alpha.
1998-11-08 18:43:03 +00:00
static struct {
Clean up and fix style(9) nits.
2008-04-08 19:09:45 +00:00
int model;
u_char syncmask;
int packetsize;
probefunc_t *probefunc;
Port the ps/2 mouse driver to the alpha.
1998-11-08 18:43:03 +00:00
} vendortype[] = {
Clean up and fix style(9) nits.
2008-04-08 19:09:45 +00:00
/*
* WARNING: the order of probe is very important. Don't mess it
* unless you know what you are doing.
*/
{ MOUSE_MODEL_NET, /* Genius NetMouse */
0x08, MOUSE_PS2INTELLI_PACKETSIZE, enable_gmouse },
{ MOUSE_MODEL_NETSCROLL, /* Genius NetScroll */
0xc8, 6, enable_groller },
{ MOUSE_MODEL_MOUSEMANPLUS, /* Logitech MouseMan+ */
0x08, MOUSE_PS2_PACKETSIZE, enable_mmanplus },
{ MOUSE_MODEL_EXPLORER, /* Microsoft IntelliMouse Explorer */
0x08, MOUSE_PS2INTELLI_PACKETSIZE, enable_msexplorer },
{ MOUSE_MODEL_4D, /* A4 Tech 4D Mouse */
0x08, MOUSE_4D_PACKETSIZE, enable_4dmouse },
{ MOUSE_MODEL_4DPLUS, /* A4 Tech 4D+ Mouse */
0xc8, MOUSE_4DPLUS_PACKETSIZE, enable_4dplus },
Try to detect a Synaptics touchpad before IntelliMouse. Some touchpads will pretend to be IntelliMouse (which have a few more features than generic mice) causing the IntelliMouse probe to work and the Synaptics code never to be called. This should not break "real" IntelliMouse because the Synaptics detection code is fairly specific. PR: kern/120833 Submitted by: Eygene Ryabinkin <rea-fbsd -at- codelabs.ru> MFC after: 1 week
2008-06-01 13:44:51 +00:00
{ MOUSE_MODEL_SYNAPTICS, /* Synaptics Touchpad */
0xc0, MOUSE_SYNAPTICS_PACKETSIZE, enable_synaptics },
Clean up and fix style(9) nits.
2008-04-08 19:09:45 +00:00
{ MOUSE_MODEL_INTELLI, /* Microsoft IntelliMouse */
0x08, MOUSE_PS2INTELLI_PACKETSIZE, enable_msintelli },
{ MOUSE_MODEL_GLIDEPOINT, /* ALPS GlidePoint */
0xc0, MOUSE_PS2_PACKETSIZE, enable_aglide },
{ MOUSE_MODEL_THINK, /* Kensington ThinkingMouse */
0x80, MOUSE_PS2_PACKETSIZE, enable_kmouse },
{ MOUSE_MODEL_VERSAPAD, /* Interlink electronics VersaPad */
0xe8, MOUSE_PS2VERSA_PACKETSIZE, enable_versapad },
Add preliminary support for IBM/Lenovo TrackPoint. PR: kern/147237 (based on the initial patch for 8.x) Tested by: glebius (device detection and suspend/resume) MFC after: 1 month
2013-03-18 23:22:47 +00:00
{ MOUSE_MODEL_TRACKPOINT, /* IBM/Lenovo TrackPoint */
0xc0, MOUSE_PS2_PACKETSIZE, enable_trackpoint },
Clean up and fix style(9) nits.
2008-04-08 19:09:45 +00:00
{ MOUSE_MODEL_GENERIC,
0xc0, MOUSE_PS2_PACKETSIZE, NULL },
Port the ps/2 mouse driver to the alpha.
1998-11-08 18:43:03 +00:00
};
sys/dev: use our nitems() macro when it is avaliable through param.h. No functional change, only trivial cases are done in this sweep, Drivers that can get further enhancements will be done independently. Discussed in: freebsd-current
2016-04-19 23:37:24 +00:00
#define GENERIC_MOUSE_ENTRY (nitems(vendortype) - 1)
Port the ps/2 mouse driver to the alpha.
1998-11-08 18:43:03 +00:00
/* device driver declarateion */
static device_method_t psm_methods[] = {
/* Device interface */
Update the atkbdc, atkbd, and psm drivers to probe/attach more cleanly and consistently in all APCI, PnP BIOS, and "hint" cases. NOTE: this doesn't necessarily solve the problem that the PS/2 mouse is not detected after the recent ACPI update.
2001-09-06 12:09:26 +00:00
DEVMETHOD(device_identify, psmidentify),
Port the ps/2 mouse driver to the alpha.
1998-11-08 18:43:03 +00:00
DEVMETHOD(device_probe, psmprobe),
DEVMETHOD(device_attach, psmattach),
- Add Support for the following PS/2 mice: - Microsoft IntelliMouse Explorer: 2 buttons on top, 2 side buttons and a wheel which also acts as the middle button. The mouse is recognized as "IntelliMouse Explorer". - Genius NetScroll Optical: 2 buttons on top, 2 side buttons and a wheel which also acts as the middle button. The mouse is recognized as "NetMouse/NetScroll Optical". - MouseSystems SmartScroll Mouse (OEM from Genius?): 3 buttons on top, 1 side button and a wheel. The mouse is recognized as Genius "NetScroll". - IBM ScrollPoint: 2 buttons on top and a stick between the buttons. The stick can perform "horizontal scroll" in W*ndows environment. The horizontal movement of the stick is detected. It is currently mapped to the Z axis movement in the same way as the first wheel. The mouse is recognized as "MouseMan+", as it is considered to be a variation of MouseMan. - A4 Tech 4D and 4D+ mice. These mice have two wheels! The movement of the second wheel is reported as the Z axis movement in the same way as the first wheel. These mice are recognized as "4D Mouse" and "4D+ Mouse". - Tweak IntelliMouse support code a bit so that less-than-compatible wheel mice can work properly with the psm driver. - Add driver configuration flags which correspond to the kernel options PSM_HOOKRESUME and PSM_RESETAFTERSUSPEND, so that we don't need to recompile the kernel when we need these functions. - Properly keep track of the irq resource. - Add a watchdog timer in case interrupts are lost (experimental). - Add `detach' function (experimental).
2000-03-18 15:21:40 +00:00
DEVMETHOD(device_detach, psmdetach),
- Add the device resume method. It supercedes the existing resume routine which hooks the apm driver. - Rename the PSM_HOOKAPM option to PSM_HOOKRESUME. - Delete unnecessary #include.
1999-12-15 10:04:05 +00:00
DEVMETHOD(device_resume, psmresume),
Port the ps/2 mouse driver to the alpha.
1998-11-08 18:43:03 +00:00
{ 0, 0 }
};
static driver_t psm_driver = {
Clean up and fix style(9) nits.
2008-04-08 19:09:45 +00:00
PSM_DRIVER_NAME,
psm_methods,
sizeof(struct psm_softc),
Port the ps/2 mouse driver to the alpha.
1998-11-08 18:43:03 +00:00
};
This commit should be a extensive NO-OP: Reformat and initialize correctly all "struct cdevsw". Initialize the d_maj and d_bmaj fields. The d_reset field was not removed, although it is never used. I used a program to do most of this, so all the files now use the same consistent format. Please keep it that way. Vinum and i4b not modified, patches emailed to respective authors.
1999-05-30 16:53:49 +00:00
static struct cdevsw psm_cdevsw = {
Device megapatch 4/6: Introduce d_version field in struct cdevsw, this must always be initialized to D_VERSION. Flip sense of D_NOGIANT flag to D_NEEDGIANT, this involves removing four D_NOGIANT flags and adding 145 D_NEEDGIANT flags.
2004-02-21 21:10:55 +00:00
.d_version = D_VERSION,
.d_flags = D_NEEDGIANT,
Gigacommit to improve device-driver source compatibility between branches: Initialize struct cdevsw using C99 sparse initializtion and remove all initializations to default values. This patch is automatically generated and has been tested by compiling LINT with all the fields in struct cdevsw in reverse order on alpha, sparc64 and i386. Approved by: re(scottl)
2003-03-03 12:15:54 +00:00
.d_open = psmopen,
.d_close = psmclose,
.d_read = psmread,
- Add write(2) support for psm(4) in native operation level. Now arbitrary commands can be written to /dev/psm%d and status can be read back from it. - Reflect the change in psm(4) and bump version for ports. MFC after: 1 week
2008-04-08 17:55:26 +00:00
.d_write = psmwrite,
Gigacommit to improve device-driver source compatibility between branches: Initialize struct cdevsw using C99 sparse initializtion and remove all initializations to default values. This patch is automatically generated and has been tested by compiling LINT with all the fields in struct cdevsw in reverse order on alpha, sparc64 and i386. Approved by: re(scottl)
2003-03-03 12:15:54 +00:00
.d_ioctl = psmioctl,
.d_poll = psmpoll,
.d_name = PSM_DRIVER_NAME,
Port the ps/2 mouse driver to the alpha.
1998-11-08 18:43:03 +00:00
};
/* device I/O routines */
static int
enable_aux_dev(KBDC kbdc)
{
Clean up and fix style(9) nits.
2008-04-08 19:09:45 +00:00
int res;
Port the ps/2 mouse driver to the alpha.
1998-11-08 18:43:03 +00:00
Clean up and fix style(9) nits.
2008-04-08 19:09:45 +00:00
res = send_aux_command(kbdc, PSMC_ENABLE_DEV);
VLOG(2, (LOG_DEBUG, "psm: ENABLE_DEV return code:%04x\n", res));
Port the ps/2 mouse driver to the alpha.
1998-11-08 18:43:03 +00:00
Clean up and fix style(9) nits.
2008-04-08 19:09:45 +00:00
return (res == PSM_ACK);
Port the ps/2 mouse driver to the alpha.
1998-11-08 18:43:03 +00:00
}
static int
disable_aux_dev(KBDC kbdc)
{
Clean up and fix style(9) nits.
2008-04-08 19:09:45 +00:00
int res;
Port the ps/2 mouse driver to the alpha.
1998-11-08 18:43:03 +00:00
Clean up and fix style(9) nits.
2008-04-08 19:09:45 +00:00
res = send_aux_command(kbdc, PSMC_DISABLE_DEV);
VLOG(2, (LOG_DEBUG, "psm: DISABLE_DEV return code:%04x\n", res));
Port the ps/2 mouse driver to the alpha.
1998-11-08 18:43:03 +00:00
Clean up and fix style(9) nits.
2008-04-08 19:09:45 +00:00
return (res == PSM_ACK);
Port the ps/2 mouse driver to the alpha.
1998-11-08 18:43:03 +00:00
}
static int
get_mouse_status(KBDC kbdc, int *status, int flag, int len)
{
Clean up and fix style(9) nits.
2008-04-08 19:09:45 +00:00
int cmd;
int res;
int i;
switch (flag) {
case 0:
default:
cmd = PSMC_SEND_DEV_STATUS;
break;
case 1:
cmd = PSMC_SEND_DEV_DATA;
break;
}
empty_aux_buffer(kbdc, 5);
res = send_aux_command(kbdc, cmd);
VLOG(2, (LOG_DEBUG, "psm: SEND_AUX_DEV_%s return code:%04x\n",
(flag == 1) ? "DATA" : "STATUS", res));
if (res != PSM_ACK)
return (0);
for (i = 0; i < len; ++i) {
status[i] = read_aux_data(kbdc);
if (status[i] < 0)
break;
}
VLOG(1, (LOG_DEBUG, "psm: %s %02x %02x %02x\n",
(flag == 1) ? "data" : "status", status[0], status[1], status[2]));
return (i);
Port the ps/2 mouse driver to the alpha.
1998-11-08 18:43:03 +00:00
}
static int
get_aux_id(KBDC kbdc)
{
Clean up and fix style(9) nits.
2008-04-08 19:09:45 +00:00
int res;
int id;
Port the ps/2 mouse driver to the alpha.
1998-11-08 18:43:03 +00:00
Clean up and fix style(9) nits.
2008-04-08 19:09:45 +00:00
empty_aux_buffer(kbdc, 5);
res = send_aux_command(kbdc, PSMC_SEND_DEV_ID);
VLOG(2, (LOG_DEBUG, "psm: SEND_DEV_ID return code:%04x\n", res));
if (res != PSM_ACK)
return (-1);
Port the ps/2 mouse driver to the alpha.
1998-11-08 18:43:03 +00:00
Clean up and fix style(9) nits.
2008-04-08 19:09:45 +00:00
/* 10ms delay */
DELAY(10000);
Port the ps/2 mouse driver to the alpha.
1998-11-08 18:43:03 +00:00
Clean up and fix style(9) nits.
2008-04-08 19:09:45 +00:00
id = read_aux_data(kbdc);
VLOG(2, (LOG_DEBUG, "psm: device ID: %04x\n", id));
Port the ps/2 mouse driver to the alpha.
1998-11-08 18:43:03 +00:00
Clean up and fix style(9) nits.
2008-04-08 19:09:45 +00:00
return (id);
Port the ps/2 mouse driver to the alpha.
1998-11-08 18:43:03 +00:00
}
static int
set_mouse_sampling_rate(KBDC kbdc, int rate)
{
Clean up and fix style(9) nits.
2008-04-08 19:09:45 +00:00
int res;
Port the ps/2 mouse driver to the alpha.
1998-11-08 18:43:03 +00:00
Clean up and fix style(9) nits.
2008-04-08 19:09:45 +00:00
res = send_aux_command_and_data(kbdc, PSMC_SET_SAMPLING_RATE, rate);
VLOG(2, (LOG_DEBUG, "psm: SET_SAMPLING_RATE (%d) %04x\n", rate, res));
Port the ps/2 mouse driver to the alpha.
1998-11-08 18:43:03 +00:00
Clean up and fix style(9) nits.
2008-04-08 19:09:45 +00:00
return ((res == PSM_ACK) ? rate : -1);
Port the ps/2 mouse driver to the alpha.
1998-11-08 18:43:03 +00:00
}
static int
set_mouse_scaling(KBDC kbdc, int scale)
{
Clean up and fix style(9) nits.
2008-04-08 19:09:45 +00:00
int res;
switch (scale) {
case 1:
default:
scale = PSMC_SET_SCALING11;
break;
case 2:
scale = PSMC_SET_SCALING21;
break;
}
res = send_aux_command(kbdc, scale);
VLOG(2, (LOG_DEBUG, "psm: SET_SCALING%s return code:%04x\n",
(scale == PSMC_SET_SCALING21) ? "21" : "11", res));
return (res == PSM_ACK);
Port the ps/2 mouse driver to the alpha.
1998-11-08 18:43:03 +00:00
}
/* `val' must be 0 through PSMD_MAX_RESOLUTION */
static int
set_mouse_resolution(KBDC kbdc, int val)
{
Clean up and fix style(9) nits.
2008-04-08 19:09:45 +00:00
int res;
Port the ps/2 mouse driver to the alpha.
1998-11-08 18:43:03 +00:00
Clean up and fix style(9) nits.
2008-04-08 19:09:45 +00:00
res = send_aux_command_and_data(kbdc, PSMC_SET_RESOLUTION, val);
VLOG(2, (LOG_DEBUG, "psm: SET_RESOLUTION (%d) %04x\n", val, res));
Port the ps/2 mouse driver to the alpha.
1998-11-08 18:43:03 +00:00
Clean up and fix style(9) nits.
2008-04-08 19:09:45 +00:00
return ((res == PSM_ACK) ? val : -1);
Port the ps/2 mouse driver to the alpha.
1998-11-08 18:43:03 +00:00
}
/*
* NOTE: once `set_mouse_mode()' is called, the mouse device must be
* re-enabled by calling `enable_aux_dev()'
*/
static int
set_mouse_mode(KBDC kbdc)
{
Clean up and fix style(9) nits.
2008-04-08 19:09:45 +00:00
int res;
Port the ps/2 mouse driver to the alpha.
1998-11-08 18:43:03 +00:00
Clean up and fix style(9) nits.
2008-04-08 19:09:45 +00:00
res = send_aux_command(kbdc, PSMC_SET_STREAM_MODE);
VLOG(2, (LOG_DEBUG, "psm: SET_STREAM_MODE return code:%04x\n", res));
Port the ps/2 mouse driver to the alpha.
1998-11-08 18:43:03 +00:00
Clean up and fix style(9) nits.
2008-04-08 19:09:45 +00:00
return (res == PSM_ACK);
Port the ps/2 mouse driver to the alpha.
1998-11-08 18:43:03 +00:00
}
static int
get_mouse_buttons(KBDC kbdc)
{
Clean up and fix style(9) nits.
2008-04-08 19:09:45 +00:00
int c = 2; /* assume two buttons by default */
int status[3];
/*
* NOTE: a special sequence to obtain Logitech Mouse specific
* information: set resolution to 25 ppi, set scaling to 1:1, set
* scaling to 1:1, set scaling to 1:1. Then the second byte of the
* mouse status bytes is the number of available buttons.
* Some manufactures also support this sequence.
*/
if (set_mouse_resolution(kbdc, PSMD_RES_LOW) != PSMD_RES_LOW)
return (c);
if (set_mouse_scaling(kbdc, 1) && set_mouse_scaling(kbdc, 1) &&
set_mouse_scaling(kbdc, 1) &&
get_mouse_status(kbdc, status, 0, 3) >= 3 && status[1] != 0)
return (status[1]);
return (c);
Port the ps/2 mouse driver to the alpha.
1998-11-08 18:43:03 +00:00
}
/* misc subroutines */
/*
* Someday, I will get the complete list of valid pointing devices and
* their IDs... XXX
*/
static int
is_a_mouse(int id)
{
#if 0
Clean up and fix style(9) nits.
2008-04-08 19:09:45 +00:00
static int valid_ids[] = {
PSM_MOUSE_ID, /* mouse */
PSM_BALLPOINT_ID, /* ballpoint device */
PSM_INTELLI_ID, /* Intellimouse */
PSM_EXPLORER_ID, /* Intellimouse Explorer */
-1 /* end of table */
};
int i;
for (i = 0; valid_ids[i] >= 0; ++i)
if (valid_ids[i] == id)
return (TRUE);
return (FALSE);
Port the ps/2 mouse driver to the alpha.
1998-11-08 18:43:03 +00:00
#else
Clean up and fix style(9) nits.
2008-04-08 19:09:45 +00:00
return (TRUE);
Port the ps/2 mouse driver to the alpha.
1998-11-08 18:43:03 +00:00
#endif
}
static char *
model_name(int model)
{
Clean up and fix style(9) nits.
2008-04-08 19:09:45 +00:00
static struct {
int model_code;
char *model_name;
} models[] = {
{ MOUSE_MODEL_NETSCROLL, "NetScroll" },
{ MOUSE_MODEL_NET, "NetMouse/NetScroll Optical" },
{ MOUSE_MODEL_GLIDEPOINT, "GlidePoint" },
{ MOUSE_MODEL_THINK, "ThinkingMouse" },
{ MOUSE_MODEL_INTELLI, "IntelliMouse" },
{ MOUSE_MODEL_MOUSEMANPLUS, "MouseMan+" },
{ MOUSE_MODEL_VERSAPAD, "VersaPad" },
{ MOUSE_MODEL_EXPLORER, "IntelliMouse Explorer" },
{ MOUSE_MODEL_4D, "4D Mouse" },
{ MOUSE_MODEL_4DPLUS, "4D+ Mouse" },
{ MOUSE_MODEL_SYNAPTICS, "Synaptics Touchpad" },
Add preliminary support for IBM/Lenovo TrackPoint. PR: kern/147237 (based on the initial patch for 8.x) Tested by: glebius (device detection and suspend/resume) MFC after: 1 month
2013-03-18 23:22:47 +00:00
{ MOUSE_MODEL_TRACKPOINT, "IBM/Lenovo TrackPoint" },
List TrackPoint device before generic model.
2013-03-18 23:31:22 +00:00
{ MOUSE_MODEL_GENERIC, "Generic PS/2 mouse" },
Clean up and fix style(9) nits.
2008-04-08 19:09:45 +00:00
{ MOUSE_MODEL_UNKNOWN, "Unknown" },
};
int i;
for (i = 0; models[i].model_code != MOUSE_MODEL_UNKNOWN; ++i)
if (models[i].model_code == model)
break;
return (models[i].model_name);
Port the ps/2 mouse driver to the alpha.
1998-11-08 18:43:03 +00:00
}
static void
recover_from_error(KBDC kbdc)
{
Clean up and fix style(9) nits.
2008-04-08 19:09:45 +00:00
/* discard anything left in the output buffer */
empty_both_buffers(kbdc, 10);
Port the ps/2 mouse driver to the alpha.
1998-11-08 18:43:03 +00:00
#if 0
Clean up and fix style(9) nits.
2008-04-08 19:09:45 +00:00
/*
* NOTE: KBDC_RESET_KBD may not restore the communication between the
* keyboard and the controller.
*/
reset_kbd(kbdc);
Port the ps/2 mouse driver to the alpha.
1998-11-08 18:43:03 +00:00
#else
Clean up and fix style(9) nits.
2008-04-08 19:09:45 +00:00
/*
* NOTE: somehow diagnostic and keyboard port test commands bring the
* keyboard back.
*/
if (!test_controller(kbdc))
log(LOG_ERR, "psm: keyboard controller failed.\n");
/* if there isn't a keyboard in the system, the following error is OK */
if (test_kbd_port(kbdc) != 0)
VLOG(1, (LOG_ERR, "psm: keyboard port failed.\n"));
Port the ps/2 mouse driver to the alpha.
1998-11-08 18:43:03 +00:00
#endif
}
static int
restore_controller(KBDC kbdc, int command_byte)
{
- Add Support for the following PS/2 mice: - Microsoft IntelliMouse Explorer: 2 buttons on top, 2 side buttons and a wheel which also acts as the middle button. The mouse is recognized as "IntelliMouse Explorer". - Genius NetScroll Optical: 2 buttons on top, 2 side buttons and a wheel which also acts as the middle button. The mouse is recognized as "NetMouse/NetScroll Optical". - MouseSystems SmartScroll Mouse (OEM from Genius?): 3 buttons on top, 1 side button and a wheel. The mouse is recognized as Genius "NetScroll". - IBM ScrollPoint: 2 buttons on top and a stick between the buttons. The stick can perform "horizontal scroll" in W*ndows environment. The horizontal movement of the stick is detected. It is currently mapped to the Z axis movement in the same way as the first wheel. The mouse is recognized as "MouseMan+", as it is considered to be a variation of MouseMan. - A4 Tech 4D and 4D+ mice. These mice have two wheels! The movement of the second wheel is reported as the Z axis movement in the same way as the first wheel. These mice are recognized as "4D Mouse" and "4D+ Mouse". - Tweak IntelliMouse support code a bit so that less-than-compatible wheel mice can work properly with the psm driver. - Add driver configuration flags which correspond to the kernel options PSM_HOOKRESUME and PSM_RESETAFTERSUSPEND, so that we don't need to recompile the kernel when we need these functions. - Properly keep track of the irq resource. - Add a watchdog timer in case interrupts are lost (experimental). - Add `detach' function (experimental).
2000-03-18 15:21:40 +00:00
empty_both_buffers(kbdc, 10);
Clean up and fix style(9) nits.
2008-04-08 19:09:45 +00:00
if (!set_controller_command_byte(kbdc, 0xff, command_byte)) {
log(LOG_ERR, "psm: failed to restore the keyboard controller "
"command byte.\n");
empty_both_buffers(kbdc, 10);
return (FALSE);
} else {
empty_both_buffers(kbdc, 10);
return (TRUE);
}
Port the ps/2 mouse driver to the alpha.
1998-11-08 18:43:03 +00:00
}
Clean up and fix style(9) nits.
2008-04-08 19:09:45 +00:00
/*
Port the ps/2 mouse driver to the alpha.
1998-11-08 18:43:03 +00:00
* Re-initialize the aux port and device. The aux port must be enabled
Clean up and fix style(9) nits.
2008-04-08 19:09:45 +00:00
* and its interrupt must be disabled before calling this routine.
Port the ps/2 mouse driver to the alpha.
1998-11-08 18:43:03 +00:00
* The aux device will be disabled before returning.
* The keyboard controller must be locked via `kbdc_lock()' before
* calling this routine.
*/
static int
Hack for the "out-of-sync" error. - Count the number of this error. - When the error is detected for the first time, the psm driver will throw few data bytes (up to entire packet size) and see if it can get back to sync. - If the error still persists, the psm driver disable/enable the mouse and see if it works. - If the error still persists and the count goes up to 20, the psm driver reset and reinitialize the mouse. The counter is reset to zero. - It also discards an incomplete data packet when the interval between two consequtive bytes are longer than pre-defined timeout (2 seconds). The last byte which arrived late will be regarded as the first byte of a new packet. This is louie's idea. You may see the following error logs during the above operations: "psmintr: delay too long; resetting byte count" "psmintr: out of sync (%04x != %04x)" "psmintr: discard a byte (%d)" "psmintr: re-enable the mouse" "psmintr: reset the mouse" MFC after: 1 month
2001-10-13 10:28:02 +00:00
doinitialize(struct psm_softc *sc, mousemode_t *mode)
Port the ps/2 mouse driver to the alpha.
1998-11-08 18:43:03 +00:00
{
Clean up and fix style(9) nits.
2008-04-08 19:09:45 +00:00
KBDC kbdc = sc->kbdc;
int stat[3];
int i;
switch((i = test_aux_port(kbdc))) {
case 1: /* ignore these errors */
case 2:
case 3:
case PSM_ACK:
if (verbose)
log(LOG_DEBUG,
"psm%d: strange result for test aux port (%d).\n",
sc->unit, i);
/* FALLTHROUGH */
case 0: /* no error */
Merge revs 1.57 and 1.60 of i386/isa/psm.c
1999-04-18 15:12:11 +00:00
break;
Clean up and fix style(9) nits.
2008-04-08 19:09:45 +00:00
case -1: /* time out */
default: /* error */
recover_from_error(kbdc);
if (sc->config & PSM_CONFIG_IGNPORTERROR)
break;
log(LOG_ERR, "psm%d: the aux port is not functioning (%d).\n",
sc->unit, i);
return (FALSE);
}
if (sc->config & PSM_CONFIG_NORESET) {
/*
* Don't try to reset the pointing device. It may possibly
* be left in the unknown state, though...
*/
} else {
/*
* NOTE: some controllers appears to hang the `keyboard' when
* the aux port doesn't exist and `PSMC_RESET_DEV' is issued.
*/
if (!reset_aux_dev(kbdc)) {
recover_from_error(kbdc);
log(LOG_ERR, "psm%d: failed to reset the aux device.\n",
sc->unit);
return (FALSE);
}
Port the ps/2 mouse driver to the alpha.
1998-11-08 18:43:03 +00:00
}
Clean up and fix style(9) nits.
2008-04-08 19:09:45 +00:00
/*
* both the aux port and the aux device is functioning, see
* if the device can be enabled.
*/
if (!enable_aux_dev(kbdc) || !disable_aux_dev(kbdc)) {
log(LOG_ERR, "psm%d: failed to enable the aux device.\n",
sc->unit);
return (FALSE);
}
empty_both_buffers(kbdc, 10); /* remove stray data if any */
- Do not clobber softc when psm(4) is reintialized. - Make INITAFTERSUSPEND flag independent of HOOKRESUME flag. - Automatically set INITAFTERSUSPEND flag when ALPS GlidePoint is detected. - Always probe Synaptics Touchpad. Allow MOUSE_SYN_GETHWINFO ioctl and automatically set INITAFTERSUSPEND flag when a supported device is detected, regardless of "hw.psm.synaptics_support" tunable setting. - Update psm(4) to reflect the above changes. - Remove long-time defunct SYNCHACK flag while I am in the neighborhood. MFC after: 1 month
2012-03-27 23:43:01 +00:00
/* Re-enable the mouse. */
for (i = 0; vendortype[i].probefunc != NULL; ++i)
if (vendortype[i].model == sc->hw.model)
Unbreak mouse on resume on Thinkpads when hw.psm.trackpoint_support=0, which is default. It was broken in r281441. It appears that set_trackpoint_parameters() call on resume disables the mouse. So, we need not call it on resume if hw.psm.trackpoint_support=0. The problem is that the probe functions are used both for probing and for reiniting on resume. And the absense of the softc parameter is used as a mark to distinguish reinit and probe, which is quite ugly. At the same time the softc parameter is needed to call set_trackpoint_parameters(). o Change the arguments of probefunc_t to always supply the softc, and use additional enum argument to tell probing from initing. o Don't call set_trackpoint_parameters() from global doinitialize(), instead call it from the enable_trackpoint() only. o In enable_synaptics() call enable_trackpoint() in both probe and reinit cases. Together with: Jan Kokemüller <jan.kokemueller gmail.com>
2015-06-12 13:57:04 +00:00
(*vendortype[i].probefunc)(sc, REINIT);
Clean up and fix style(9) nits.
2008-04-08 19:09:45 +00:00
/* set mouse parameters */
if (mode != (mousemode_t *)NULL) {
if (mode->rate > 0)
mode->rate = set_mouse_sampling_rate(kbdc, mode->rate);
if (mode->resolution >= 0)
mode->resolution =
set_mouse_resolution(kbdc, mode->resolution);
set_mouse_scaling(kbdc, 1);
set_mouse_mode(kbdc);
}
Port the ps/2 mouse driver to the alpha.
1998-11-08 18:43:03 +00:00
Clean up and fix style(9) nits.
2008-04-08 19:09:45 +00:00
/* Record sync on the next data packet we see. */
sc->flags |= PSM_NEED_SYNCBITS;
Port the ps/2 mouse driver to the alpha.
1998-11-08 18:43:03 +00:00
Clean up and fix style(9) nits.
2008-04-08 19:09:45 +00:00
/* just check the status of the mouse */
if (get_mouse_status(kbdc, stat, 0, 3) < 3)
log(LOG_DEBUG, "psm%d: failed to get status (doinitialize).\n",
sc->unit);
Port the ps/2 mouse driver to the alpha.
1998-11-08 18:43:03 +00:00
Clean up and fix style(9) nits.
2008-04-08 19:09:45 +00:00
return (TRUE);
Port the ps/2 mouse driver to the alpha.
1998-11-08 18:43:03 +00:00
}
static int
Hack for the "out-of-sync" error. - Count the number of this error. - When the error is detected for the first time, the psm driver will throw few data bytes (up to entire packet size) and see if it can get back to sync. - If the error still persists, the psm driver disable/enable the mouse and see if it works. - If the error still persists and the count goes up to 20, the psm driver reset and reinitialize the mouse. The counter is reset to zero. - It also discards an incomplete data packet when the interval between two consequtive bytes are longer than pre-defined timeout (2 seconds). The last byte which arrived late will be regarded as the first byte of a new packet. This is louie's idea. You may see the following error logs during the above operations: "psmintr: delay too long; resetting byte count" "psmintr: out of sync (%04x != %04x)" "psmintr: discard a byte (%d)" "psmintr: re-enable the mouse" "psmintr: reset the mouse" MFC after: 1 month
2001-10-13 10:28:02 +00:00
doopen(struct psm_softc *sc, int command_byte)
Port the ps/2 mouse driver to the alpha.
1998-11-08 18:43:03 +00:00
{
Clean up and fix style(9) nits.
2008-04-08 19:09:45 +00:00
int stat[3];
Rewrite Synaptics touchpads support with the following goals in mind: o better quality of the movement smoothing o more features such as tap-hold and virtual scrolling Support must still be enabled with this line in your /boot/loader.conf: hw.psm.synaptics_support="1" The following sysctls were removed: hw.psm.synaptics.low_speed_threshold hw.psm.synaptics.min_movement hw.psm.synaptics.squelch_level An overview of this new driver and a short documentation about the added sysctls is available on the wiki: http://wiki.freebsd.org/SynapticsTouchpad
2008-10-14 17:48:36 +00:00
/*
* FIXME: Synaptics TouchPad seems to go back to Relative Mode with
* no obvious reason. Thus we check the current mode and restore the
* Absolute Mode if it was cleared.
*
* The previous hack at the end of psmprobe() wasn't efficient when
* moused(8) was restarted.
*
* A Reset (FF) or Set Defaults (F6) command would clear the
* Absolute Mode bit. But a verbose boot or debug.psm.loglevel=5
* doesn't show any evidence of such a command.
*/
if (sc->hw.model == MOUSE_MODEL_SYNAPTICS) {
mouse_ext_command(sc->kbdc, 1);
get_mouse_status(sc->kbdc, stat, 0, 3);
psm: Support detection of Synaptics touchpad v7.5 and above Starting with firmware v7.5, the "Read TouchPad Modes" ($01) and "Read Capabilities" ($02) commands changed: previously constant bytes now carry variable information. We now compare those bytes to expected constants only for firmware prior to v7.5. Tested by: Zeus Panchenko <zeus@gnu.org.ua> MFC after: 1 week
2012-12-18 20:02:53 +00:00
if ((SYNAPTICS_VERSION_GE(sc->synhw, 7, 5) ||
stat[1] == 0x47) &&
synaptics: more support for semi-MT trackpads. Several improvements to the Synaptics driver to support semi-multitouch trackpads and some other fixes: - Two finger scrolling support for "semi-MT" touchpads. Those include many of the older Synaptics touchpads before "true" multitouch support (indicated by capMultiFinger). Semi-MT touchpads can report a second finger position, but the X or Y coordinate may be swapped with some coordinate of the first finger. This is a result of how the hardware works internally. Therefore, all that can be reliably extracted is the bounding box of the two finger positions. Semi-MT touchpads can be recognized by the capAdvancedGestures capability bit. After setting the mode byte, advanced gestures mode has to be enabled. Then, data packets compatible with the capMultiFinger format are sent, so the same two finger scrolling code can be leveraged. Enabling advanced gestures mode on true multitouch touchpads should be harmless. Linux seems to always enable advanced gestures mode. - Put mode setting logic into own functions synaptics_preferred_mode() and synaptics_set_mode() to have this in one place. synaptics_passthrough_on() and synaptics_passthrough_off() currently always use 0xc1 as the mode byte, which may be wrong for touchpads that don't have capExtended. - Expose X and Y resolution of touchpad to userland. Also expose minimum and maximum X and Y coordinates. This is useful for programs in userspace that read raw PSM packets (with PSM_LEVEL_NATIVE enabled) and need to interpret the coordinates. - Also send "extended w mode" packets (see section 3.2.9 of 511-000275-01_RevB.pdf) to userspace if PSM_LEVEL_NATIVE is enabled. This is useful for userspace programs/drivers such as xf86-input-synaptics that can handle these packets. - Fix parsing of nExtendedQueries, and request extended/continued capability bits depending on this value. - capReportsMax, capClearPad, capAdvancedGestures and capCoveredPad must be extracted from status[0] and not status[2], I think. Submitted by: Jan Kokemüller jan.kokemueller at gmail.com
2015-05-10 20:36:57 +00:00
stat[2] == 0x40) {
synaptics_set_mode(sc, synaptics_preferred_mode(sc));
Rewrite Synaptics touchpads support with the following goals in mind: o better quality of the movement smoothing o more features such as tap-hold and virtual scrolling Support must still be enabled with this line in your /boot/loader.conf: hw.psm.synaptics_support="1" The following sysctls were removed: hw.psm.synaptics.low_speed_threshold hw.psm.synaptics.min_movement hw.psm.synaptics.squelch_level An overview of this new driver and a short documentation about the added sysctls is available on the wiki: http://wiki.freebsd.org/SynapticsTouchpad
2008-10-14 17:48:36 +00:00
VLOG(5, (LOG_DEBUG, "psm%d: Synaptis Absolute Mode "
"hopefully restored\n",
sc->unit));
}
}
Add new "hw.psm.tap_enabled" tunable and sysctl. This tunable allows one to enable (1) or disable (0) gestures like tap and tap-hold on Synaptics TouchPad when the Extended mode isn't enabled (ie. "hw.psm.synaptics_support" not set). By default, the value is -1 in order to keep the current behaviour of not enabling/disabling gestures explicitly. PR: kern/139272 Submitted by: David Horn <dhorn2000 AT gmail DOT com> Reviewed by: David Horn <dhorn2000 AT gmail DOT com>
2009-12-18 17:46:57 +00:00
/*
* A user may want to disable tap and drag gestures on a Synaptics
* TouchPad when it operates in Relative Mode.
*/
if (sc->hw.model == MOUSE_MODEL_GENERIC) {
if (tap_enabled > 0) {
/*
* Enable tap & drag gestures. We use a Mode Byte
* and clear the DisGest bit (see §2.5 of Synaptics
* TouchPad Interfacing Guide).
*/
VLOG(2, (LOG_DEBUG,
"psm%d: enable tap and drag gestures\n",
sc->unit));
mouse_ext_command(sc->kbdc, 0x00);
set_mouse_sampling_rate(sc->kbdc, 20);
} else if (tap_enabled == 0) {
/*
* Disable tap & drag gestures. We use a Mode Byte
* and set the DisGest bit (see §2.5 of Synaptics
* TouchPad Interfacing Guide).
*/
VLOG(2, (LOG_DEBUG,
"psm%d: disable tap and drag gestures\n",
sc->unit));
mouse_ext_command(sc->kbdc, 0x04);
set_mouse_sampling_rate(sc->kbdc, 20);
}
}
Clean up and fix style(9) nits.
2008-04-08 19:09:45 +00:00
/* enable the mouse device */
if (!enable_aux_dev(sc->kbdc)) {
/* MOUSE ERROR: failed to enable the mouse because:
* 1) the mouse is faulty,
* 2) the mouse has been removed(!?)
* In the latter case, the keyboard may have hung, and need
* recovery procedure...
*/
recover_from_error(sc->kbdc);
Port the ps/2 mouse driver to the alpha.
1998-11-08 18:43:03 +00:00
#if 0
Clean up and fix style(9) nits.
2008-04-08 19:09:45 +00:00
/* FIXME: we could reset the mouse here and try to enable
* it again. But it will take long time and it's not a good
* idea to disable the keyboard that long...
*/
if (!doinitialize(sc, &sc->mode) || !enable_aux_dev(sc->kbdc)) {
recover_from_error(sc->kbdc);
Port the ps/2 mouse driver to the alpha.
1998-11-08 18:43:03 +00:00
#else
Clean up and fix style(9) nits.
2008-04-08 19:09:45 +00:00
{
Port the ps/2 mouse driver to the alpha.
1998-11-08 18:43:03 +00:00
#endif
Clean up and fix style(9) nits.
2008-04-08 19:09:45 +00:00
restore_controller(sc->kbdc, command_byte);
/* mark this device is no longer available */
sc->state &= ~PSM_VALID;
log(LOG_ERR,
"psm%d: failed to enable the device (doopen).\n",
sc->unit);
return (EIO);
}
Port the ps/2 mouse driver to the alpha.
1998-11-08 18:43:03 +00:00
}
Clean up and fix style(9) nits.
2008-04-08 19:09:45 +00:00
if (get_mouse_status(sc->kbdc, stat, 0, 3) < 3)
log(LOG_DEBUG, "psm%d: failed to get status (doopen).\n",
sc->unit);
Port the ps/2 mouse driver to the alpha.
1998-11-08 18:43:03 +00:00
Clean up and fix style(9) nits.
2008-04-08 19:09:45 +00:00
/* enable the aux port and interrupt */
if (!set_controller_command_byte(sc->kbdc,
Port the ps/2 mouse driver to the alpha.
1998-11-08 18:43:03 +00:00
kbdc_get_device_mask(sc->kbdc),
Clean up and fix style(9) nits.
2008-04-08 19:09:45 +00:00
(command_byte & KBD_KBD_CONTROL_BITS) |
KBD_ENABLE_AUX_PORT | KBD_ENABLE_AUX_INT)) {
/* CONTROLLER ERROR */
disable_aux_dev(sc->kbdc);
restore_controller(sc->kbdc, command_byte);
log(LOG_ERR,
"psm%d: failed to enable the aux interrupt (doopen).\n",
sc->unit);
return (EIO);
}
/* start the watchdog timer */
sc->watchdog = FALSE;
Use callout(9) instead of timeout(9) to manage timers.
2012-09-07 19:42:36 +00:00
callout_reset(&sc->callout, hz * 2, psmtimeout, sc);
Clean up and fix style(9) nits.
2008-04-08 19:09:45 +00:00
return (0);
Port the ps/2 mouse driver to the alpha.
1998-11-08 18:43:03 +00:00
}
Hack for the "out-of-sync" error. - Count the number of this error. - When the error is detected for the first time, the psm driver will throw few data bytes (up to entire packet size) and see if it can get back to sync. - If the error still persists, the psm driver disable/enable the mouse and see if it works. - If the error still persists and the count goes up to 20, the psm driver reset and reinitialize the mouse. The counter is reset to zero. - It also discards an incomplete data packet when the interval between two consequtive bytes are longer than pre-defined timeout (2 seconds). The last byte which arrived late will be regarded as the first byte of a new packet. This is louie's idea. You may see the following error logs during the above operations: "psmintr: delay too long; resetting byte count" "psmintr: out of sync (%04x != %04x)" "psmintr: discard a byte (%d)" "psmintr: re-enable the mouse" "psmintr: reset the mouse" MFC after: 1 month
2001-10-13 10:28:02 +00:00
static int
reinitialize(struct psm_softc *sc, int doinit)
{
Clean up and fix style(9) nits.
2008-04-08 19:09:45 +00:00
int err;
int c;
int s;
/* don't let anybody mess with the aux device */
if (!kbdc_lock(sc->kbdc, TRUE))
return (EIO);
s = spltty();
/* block our watchdog timer */
sc->watchdog = FALSE;
Use callout(9) instead of timeout(9) to manage timers.
2012-09-07 19:42:36 +00:00
callout_stop(&sc->callout);
Clean up and fix style(9) nits.
2008-04-08 19:09:45 +00:00
/* save the current controller command byte */
empty_both_buffers(sc->kbdc, 10);
c = get_controller_command_byte(sc->kbdc);
VLOG(2, (LOG_DEBUG,
"psm%d: current command byte: %04x (reinitialize).\n",
sc->unit, c));
/* enable the aux port but disable the aux interrupt and the keyboard */
if ((c == -1) || !set_controller_command_byte(sc->kbdc,
Hack for the "out-of-sync" error. - Count the number of this error. - When the error is detected for the first time, the psm driver will throw few data bytes (up to entire packet size) and see if it can get back to sync. - If the error still persists, the psm driver disable/enable the mouse and see if it works. - If the error still persists and the count goes up to 20, the psm driver reset and reinitialize the mouse. The counter is reset to zero. - It also discards an incomplete data packet when the interval between two consequtive bytes are longer than pre-defined timeout (2 seconds). The last byte which arrived late will be regarded as the first byte of a new packet. This is louie's idea. You may see the following error logs during the above operations: "psmintr: delay too long; resetting byte count" "psmintr: out of sync (%04x != %04x)" "psmintr: discard a byte (%d)" "psmintr: re-enable the mouse" "psmintr: reset the mouse" MFC after: 1 month
2001-10-13 10:28:02 +00:00
kbdc_get_device_mask(sc->kbdc),
Clean up and fix style(9) nits.
2008-04-08 19:09:45 +00:00
KBD_DISABLE_KBD_PORT | KBD_DISABLE_KBD_INT |
KBD_ENABLE_AUX_PORT | KBD_DISABLE_AUX_INT)) {
/* CONTROLLER ERROR */
splx(s);
kbdc_lock(sc->kbdc, FALSE);
log(LOG_ERR,
"psm%d: unable to set the command byte (reinitialize).\n",
sc->unit);
return (EIO);
}
/* flush any data */
if (sc->state & PSM_VALID) {
/* this may fail; but never mind... */
disable_aux_dev(sc->kbdc);
empty_aux_buffer(sc->kbdc, 10);
}
flushpackets(sc);
sc->syncerrors = 0;
sc->pkterrors = 0;
memset(&sc->lastinputerr, 0, sizeof(sc->lastinputerr));
/* try to detect the aux device; are you still there? */
err = 0;
if (doinit) {
if (doinitialize(sc, &sc->mode)) {
/* yes */
sc->state |= PSM_VALID;
} else {
/* the device has gone! */
restore_controller(sc->kbdc, c);
sc->state &= ~PSM_VALID;
log(LOG_ERR,
"psm%d: the aux device has gone! (reinitialize).\n",
sc->unit);
err = ENXIO;
}
}
Hack for the "out-of-sync" error. - Count the number of this error. - When the error is detected for the first time, the psm driver will throw few data bytes (up to entire packet size) and see if it can get back to sync. - If the error still persists, the psm driver disable/enable the mouse and see if it works. - If the error still persists and the count goes up to 20, the psm driver reset and reinitialize the mouse. The counter is reset to zero. - It also discards an incomplete data packet when the interval between two consequtive bytes are longer than pre-defined timeout (2 seconds). The last byte which arrived late will be regarded as the first byte of a new packet. This is louie's idea. You may see the following error logs during the above operations: "psmintr: delay too long; resetting byte count" "psmintr: out of sync (%04x != %04x)" "psmintr: discard a byte (%d)" "psmintr: re-enable the mouse" "psmintr: reset the mouse" MFC after: 1 month
2001-10-13 10:28:02 +00:00
splx(s);
Clean up and fix style(9) nits.
2008-04-08 19:09:45 +00:00
/* restore the driver state */
if ((sc->state & PSM_OPEN) && (err == 0)) {
/* enable the aux device and the port again */
err = doopen(sc, c);
if (err != 0)
log(LOG_ERR, "psm%d: failed to enable the device "
"(reinitialize).\n", sc->unit);
Hack for the "out-of-sync" error. - Count the number of this error. - When the error is detected for the first time, the psm driver will throw few data bytes (up to entire packet size) and see if it can get back to sync. - If the error still persists, the psm driver disable/enable the mouse and see if it works. - If the error still persists and the count goes up to 20, the psm driver reset and reinitialize the mouse. The counter is reset to zero. - It also discards an incomplete data packet when the interval between two consequtive bytes are longer than pre-defined timeout (2 seconds). The last byte which arrived late will be regarded as the first byte of a new packet. This is louie's idea. You may see the following error logs during the above operations: "psmintr: delay too long; resetting byte count" "psmintr: out of sync (%04x != %04x)" "psmintr: discard a byte (%d)" "psmintr: re-enable the mouse" "psmintr: reset the mouse" MFC after: 1 month
2001-10-13 10:28:02 +00:00
} else {
Clean up and fix style(9) nits.
2008-04-08 19:09:45 +00:00
/* restore the keyboard port and disable the aux port */
if (!set_controller_command_byte(sc->kbdc,
kbdc_get_device_mask(sc->kbdc),
(c & KBD_KBD_CONTROL_BITS) |
KBD_DISABLE_AUX_PORT | KBD_DISABLE_AUX_INT)) {
/* CONTROLLER ERROR */
log(LOG_ERR, "psm%d: failed to disable the aux port "
"(reinitialize).\n", sc->unit);
err = EIO;
}
}
kbdc_lock(sc->kbdc, FALSE);
return (err);
Hack for the "out-of-sync" error. - Count the number of this error. - When the error is detected for the first time, the psm driver will throw few data bytes (up to entire packet size) and see if it can get back to sync. - If the error still persists, the psm driver disable/enable the mouse and see if it works. - If the error still persists and the count goes up to 20, the psm driver reset and reinitialize the mouse. The counter is reset to zero. - It also discards an incomplete data packet when the interval between two consequtive bytes are longer than pre-defined timeout (2 seconds). The last byte which arrived late will be regarded as the first byte of a new packet. This is louie's idea. You may see the following error logs during the above operations: "psmintr: delay too long; resetting byte count" "psmintr: out of sync (%04x != %04x)" "psmintr: discard a byte (%d)" "psmintr: re-enable the mouse" "psmintr: reset the mouse" MFC after: 1 month
2001-10-13 10:28:02 +00:00
}
Port the ps/2 mouse driver to the alpha.
1998-11-08 18:43:03 +00:00
/* psm driver entry points */
Update the atkbdc, atkbd, and psm drivers to probe/attach more cleanly and consistently in all APCI, PnP BIOS, and "hint" cases. NOTE: this doesn't necessarily solve the problem that the PS/2 mouse is not detected after the recent ACPI update.
2001-09-06 12:09:26 +00:00
static void
psmidentify(driver_t *driver, device_t parent)
{
Clean up and fix style(9) nits.
2008-04-08 19:09:45 +00:00
device_t psmc;
device_t psm;
u_long irq;
int unit;
unit = device_get_unit(parent);
/* always add at least one child */
psm = BUS_ADD_CHILD(parent, KBDC_RID_AUX, driver->name, unit);
if (psm == NULL)
return;
irq = bus_get_resource_start(psm, SYS_RES_IRQ, KBDC_RID_AUX);
if (irq > 0)
return;
/*
* If the PS/2 mouse device has already been reported by ACPI or
* PnP BIOS, obtain the IRQ resource from it.
* (See psmcpnp_attach() below.)
*/
psmc = device_find_child(device_get_parent(parent),
PSMCPNP_DRIVER_NAME, unit);
if (psmc == NULL)
return;
irq = bus_get_resource_start(psmc, SYS_RES_IRQ, 0);
if (irq <= 0)
return;
- When moving the IRQ resource from the psmcpnp device to the psm device, delete the IRQ resource from the psmcpnp device completely. - Don't allocate the IRQ resource shared. It is not a shareable interrupt on ISA. The bus driver can set RF_SHAREABLE if the IRQ is actually shareable on a non-ISA bus.
2010-12-16 17:08:43 +00:00
bus_delete_resource(psmc, SYS_RES_IRQ, 0);
Clean up and fix style(9) nits.
2008-04-08 19:09:45 +00:00
bus_set_resource(psm, SYS_RES_IRQ, KBDC_RID_AUX, irq, 1);
Update the atkbdc, atkbd, and psm drivers to probe/attach more cleanly and consistently in all APCI, PnP BIOS, and "hint" cases. NOTE: this doesn't necessarily solve the problem that the PS/2 mouse is not detected after the recent ACPI update.
2001-09-06 12:09:26 +00:00
}
Clean up and fix style(9) nits.
2008-04-08 19:09:45 +00:00
#define endprobe(v) do { \
if (bootverbose) \
--verbose; \
kbdc_set_device_mask(sc->kbdc, mask); \
kbdc_lock(sc->kbdc, FALSE); \
return (v); \
} while (0)
Port the ps/2 mouse driver to the alpha.
1998-11-08 18:43:03 +00:00
static int
psmprobe(device_t dev)
{
Clean up and fix style(9) nits.
2008-04-08 19:09:45 +00:00
int unit = device_get_unit(dev);
struct psm_softc *sc = device_get_softc(dev);
int stat[3];
int command_byte;
int mask;
int rid;
int i;
Port the ps/2 mouse driver to the alpha.
1998-11-08 18:43:03 +00:00
#if 0
Clean up and fix style(9) nits.
2008-04-08 19:09:45 +00:00
kbdc_debug(TRUE);
Port the ps/2 mouse driver to the alpha.
1998-11-08 18:43:03 +00:00
#endif
- Add Support for the following PS/2 mice: - Microsoft IntelliMouse Explorer: 2 buttons on top, 2 side buttons and a wheel which also acts as the middle button. The mouse is recognized as "IntelliMouse Explorer". - Genius NetScroll Optical: 2 buttons on top, 2 side buttons and a wheel which also acts as the middle button. The mouse is recognized as "NetMouse/NetScroll Optical". - MouseSystems SmartScroll Mouse (OEM from Genius?): 3 buttons on top, 1 side button and a wheel. The mouse is recognized as Genius "NetScroll". - IBM ScrollPoint: 2 buttons on top and a stick between the buttons. The stick can perform "horizontal scroll" in W*ndows environment. The horizontal movement of the stick is detected. It is currently mapped to the Z axis movement in the same way as the first wheel. The mouse is recognized as "MouseMan+", as it is considered to be a variation of MouseMan. - A4 Tech 4D and 4D+ mice. These mice have two wheels! The movement of the second wheel is reported as the Z axis movement in the same way as the first wheel. These mice are recognized as "4D Mouse" and "4D+ Mouse". - Tweak IntelliMouse support code a bit so that less-than-compatible wheel mice can work properly with the psm driver. - Add driver configuration flags which correspond to the kernel options PSM_HOOKRESUME and PSM_RESETAFTERSUSPEND, so that we don't need to recompile the kernel when we need these functions. - Properly keep track of the irq resource. - Add a watchdog timer in case interrupts are lost (experimental). - Add `detach' function (experimental).
2000-03-18 15:21:40 +00:00
Clean up and fix style(9) nits.
2008-04-08 19:09:45 +00:00
/* see if IRQ is available */
rid = KBDC_RID_AUX;
- When moving the IRQ resource from the psmcpnp device to the psm device, delete the IRQ resource from the psmcpnp device completely. - Don't allocate the IRQ resource shared. It is not a shareable interrupt on ISA. The bus driver can set RF_SHAREABLE if the IRQ is actually shareable on a non-ISA bus.
2010-12-16 17:08:43 +00:00
sc->intr = bus_alloc_resource_any(dev, SYS_RES_IRQ, &rid, RF_ACTIVE);
Clean up and fix style(9) nits.
2008-04-08 19:09:45 +00:00
if (sc->intr == NULL) {
if (bootverbose)
device_printf(dev, "unable to allocate IRQ\n");
return (ENXIO);
}
bus_release_resource(dev, SYS_RES_IRQ, rid, sc->intr);
sc->unit = unit;
sc->kbdc = atkbdc_open(device_get_unit(device_get_parent(dev)));
sc->config = device_get_flags(dev) & PSM_CONFIG_FLAGS;
/* XXX: for backward compatibility */
- Add Support for the following PS/2 mice: - Microsoft IntelliMouse Explorer: 2 buttons on top, 2 side buttons and a wheel which also acts as the middle button. The mouse is recognized as "IntelliMouse Explorer". - Genius NetScroll Optical: 2 buttons on top, 2 side buttons and a wheel which also acts as the middle button. The mouse is recognized as "NetMouse/NetScroll Optical". - MouseSystems SmartScroll Mouse (OEM from Genius?): 3 buttons on top, 1 side button and a wheel. The mouse is recognized as Genius "NetScroll". - IBM ScrollPoint: 2 buttons on top and a stick between the buttons. The stick can perform "horizontal scroll" in W*ndows environment. The horizontal movement of the stick is detected. It is currently mapped to the Z axis movement in the same way as the first wheel. The mouse is recognized as "MouseMan+", as it is considered to be a variation of MouseMan. - A4 Tech 4D and 4D+ mice. These mice have two wheels! The movement of the second wheel is reported as the Z axis movement in the same way as the first wheel. These mice are recognized as "4D Mouse" and "4D+ Mouse". - Tweak IntelliMouse support code a bit so that less-than-compatible wheel mice can work properly with the psm driver. - Add driver configuration flags which correspond to the kernel options PSM_HOOKRESUME and PSM_RESETAFTERSUSPEND, so that we don't need to recompile the kernel when we need these functions. - Properly keep track of the irq resource. - Add a watchdog timer in case interrupts are lost (experimental). - Add `detach' function (experimental).
2000-03-18 15:21:40 +00:00
#if defined(PSM_HOOKRESUME) || defined(PSM_HOOKAPM)
Clean up and fix style(9) nits.
2008-04-08 19:09:45 +00:00
sc->config |=
- Add Support for the following PS/2 mice: - Microsoft IntelliMouse Explorer: 2 buttons on top, 2 side buttons and a wheel which also acts as the middle button. The mouse is recognized as "IntelliMouse Explorer". - Genius NetScroll Optical: 2 buttons on top, 2 side buttons and a wheel which also acts as the middle button. The mouse is recognized as "NetMouse/NetScroll Optical". - MouseSystems SmartScroll Mouse (OEM from Genius?): 3 buttons on top, 1 side button and a wheel. The mouse is recognized as Genius "NetScroll". - IBM ScrollPoint: 2 buttons on top and a stick between the buttons. The stick can perform "horizontal scroll" in W*ndows environment. The horizontal movement of the stick is detected. It is currently mapped to the Z axis movement in the same way as the first wheel. The mouse is recognized as "MouseMan+", as it is considered to be a variation of MouseMan. - A4 Tech 4D and 4D+ mice. These mice have two wheels! The movement of the second wheel is reported as the Z axis movement in the same way as the first wheel. These mice are recognized as "4D Mouse" and "4D+ Mouse". - Tweak IntelliMouse support code a bit so that less-than-compatible wheel mice can work properly with the psm driver. - Add driver configuration flags which correspond to the kernel options PSM_HOOKRESUME and PSM_RESETAFTERSUSPEND, so that we don't need to recompile the kernel when we need these functions. - Properly keep track of the irq resource. - Add a watchdog timer in case interrupts are lost (experimental). - Add `detach' function (experimental).
2000-03-18 15:21:40 +00:00
#ifdef PSM_RESETAFTERSUSPEND
- Do not clobber softc when psm(4) is reintialized. - Make INITAFTERSUSPEND flag independent of HOOKRESUME flag. - Automatically set INITAFTERSUSPEND flag when ALPS GlidePoint is detected. - Always probe Synaptics Touchpad. Allow MOUSE_SYN_GETHWINFO ioctl and automatically set INITAFTERSUSPEND flag when a supported device is detected, regardless of "hw.psm.synaptics_support" tunable setting. - Update psm(4) to reflect the above changes. - Remove long-time defunct SYNCHACK flag while I am in the neighborhood. MFC after: 1 month
2012-03-27 23:43:01 +00:00
PSM_CONFIG_INITAFTERSUSPEND;
- Add Support for the following PS/2 mice: - Microsoft IntelliMouse Explorer: 2 buttons on top, 2 side buttons and a wheel which also acts as the middle button. The mouse is recognized as "IntelliMouse Explorer". - Genius NetScroll Optical: 2 buttons on top, 2 side buttons and a wheel which also acts as the middle button. The mouse is recognized as "NetMouse/NetScroll Optical". - MouseSystems SmartScroll Mouse (OEM from Genius?): 3 buttons on top, 1 side button and a wheel. The mouse is recognized as Genius "NetScroll". - IBM ScrollPoint: 2 buttons on top and a stick between the buttons. The stick can perform "horizontal scroll" in W*ndows environment. The horizontal movement of the stick is detected. It is currently mapped to the Z axis movement in the same way as the first wheel. The mouse is recognized as "MouseMan+", as it is considered to be a variation of MouseMan. - A4 Tech 4D and 4D+ mice. These mice have two wheels! The movement of the second wheel is reported as the Z axis movement in the same way as the first wheel. These mice are recognized as "4D Mouse" and "4D+ Mouse". - Tweak IntelliMouse support code a bit so that less-than-compatible wheel mice can work properly with the psm driver. - Add driver configuration flags which correspond to the kernel options PSM_HOOKRESUME and PSM_RESETAFTERSUSPEND, so that we don't need to recompile the kernel when we need these functions. - Properly keep track of the irq resource. - Add a watchdog timer in case interrupts are lost (experimental). - Add `detach' function (experimental).
2000-03-18 15:21:40 +00:00
#else
PSM_CONFIG_HOOKRESUME;
#endif
#endif /* PSM_HOOKRESUME | PSM_HOOKAPM */
Clean up and fix style(9) nits.
2008-04-08 19:09:45 +00:00
sc->flags = 0;
if (bootverbose)
++verbose;
device_set_desc(dev, "PS/2 Mouse");
if (!kbdc_lock(sc->kbdc, TRUE)) {
printf("psm%d: unable to lock the controller.\n", unit);
if (bootverbose)
--verbose;
return (ENXIO);
}
/*
* NOTE: two bits in the command byte controls the operation of the
* aux port (mouse port): the aux port disable bit (bit 5) and the aux
* port interrupt (IRQ 12) enable bit (bit 2).
Port the ps/2 mouse driver to the alpha.
1998-11-08 18:43:03 +00:00
*/
Clean up and fix style(9) nits.
2008-04-08 19:09:45 +00:00
/* discard anything left after the keyboard initialization */
empty_both_buffers(sc->kbdc, 10);
/* save the current command byte; it will be used later */
mask = kbdc_get_device_mask(sc->kbdc) & ~KBD_AUX_CONTROL_BITS;
command_byte = get_controller_command_byte(sc->kbdc);
if (verbose)
printf("psm%d: current command byte:%04x\n", unit,
command_byte);
if (command_byte == -1) {
/* CONTROLLER ERROR */
printf("psm%d: unable to get the current command byte value.\n",
unit);
endprobe(ENXIO);
}
/*
* disable the keyboard port while probing the aux port, which must be
* enabled during this routine
Merge revs 1.57 and 1.60 of i386/isa/psm.c
1999-04-18 15:12:11 +00:00
*/
Clean up and fix style(9) nits.
2008-04-08 19:09:45 +00:00
if (!set_controller_command_byte(sc->kbdc,
KBD_KBD_CONTROL_BITS | KBD_AUX_CONTROL_BITS,
KBD_DISABLE_KBD_PORT | KBD_DISABLE_KBD_INT |
KBD_ENABLE_AUX_PORT | KBD_DISABLE_AUX_INT)) {
/*
* this is CONTROLLER ERROR; I don't know how to recover
* from this error...
*/
Quirk based support of Chromebook keyboard found in Acer C720 This probably supports other devices based on SeaBIOS, which need to be added to the smbios based quirks table. The functionality has been ported from DragonFlyBSD and adapted to FreeBSD's more general purpose environment. Devices not covered by a quirk shouldn't be affected at all. Thanks to jhb and kostikbel for reviewing the code. Reviewed by: kostikbel, jhb Approved by: jhb, kostikbel Differential Revision: https://reviews.freebsd.org/D1802
2015-02-14 22:12:17 +00:00
if (ALWAYS_RESTORE_CONTROLLER(sc->kbdc))
restore_controller(sc->kbdc, command_byte);
Clean up and fix style(9) nits.
2008-04-08 19:09:45 +00:00
printf("psm%d: unable to set the command byte.\n", unit);
endprobe(ENXIO);
}
write_controller_command(sc->kbdc, KBDC_ENABLE_AUX_PORT);
Merge revs 1.57 and 1.60 of i386/isa/psm.c
1999-04-18 15:12:11 +00:00
/*
Clean up and fix style(9) nits.
2008-04-08 19:09:45 +00:00
* NOTE: `test_aux_port()' is designed to return with zero if the aux
* port exists and is functioning. However, some controllers appears
* to respond with zero even when the aux port doesn't exist. (It may
* be that this is only the case when the controller DOES have the aux
* port but the port is not wired on the motherboard.) The keyboard
* controllers without the port, such as the original AT, are
Various small typos and grammar nits in comments.
2010-11-18 22:17:20 +00:00
* supposed to return with an error code or simply time out. In any
Clean up and fix style(9) nits.
2008-04-08 19:09:45 +00:00
* case, we have to continue probing the port even when the controller
* passes this test.
Reset the PSM aux device twice to help pierce through some KVM's to get the correct data from the attached mouse. Multiple resets should be harmless, but just in case, the second one is non-fatal and is just ignored.
2003-07-07 05:40:13 +00:00
*
Clean up and fix style(9) nits.
2008-04-08 19:09:45 +00:00
* XXX: some controllers erroneously return the error code 1, 2 or 3
Various small typos and grammar nits in comments.
2010-11-18 22:17:20 +00:00
* when it has a perfectly functional aux port. We have to ignore
Clean up and fix style(9) nits.
2008-04-08 19:09:45 +00:00
* this error code. Even if the controller HAS error with the aux
* port, it will be detected later...
* XXX: another incompatible controller returns PSM_ACK (0xfa)...
Merge revs 1.57 and 1.60 of i386/isa/psm.c
1999-04-18 15:12:11 +00:00
*/
Clean up and fix style(9) nits.
2008-04-08 19:09:45 +00:00
switch ((i = test_aux_port(sc->kbdc))) {
case 1: /* ignore these errors */
case 2:
case 3:
case PSM_ACK:
if (verbose)
printf("psm%d: strange result for test aux port "
"(%d).\n", unit, i);
/* FALLTHROUGH */
case 0: /* no error */
Merge revs 1.57 and 1.60 of i386/isa/psm.c
1999-04-18 15:12:11 +00:00
break;
Clean up and fix style(9) nits.
2008-04-08 19:09:45 +00:00
case -1: /* time out */
default: /* error */
recover_from_error(sc->kbdc);
if (sc->config & PSM_CONFIG_IGNPORTERROR)
break;
Quirk based support of Chromebook keyboard found in Acer C720 This probably supports other devices based on SeaBIOS, which need to be added to the smbios based quirks table. The functionality has been ported from DragonFlyBSD and adapted to FreeBSD's more general purpose environment. Devices not covered by a quirk shouldn't be affected at all. Thanks to jhb and kostikbel for reviewing the code. Reviewed by: kostikbel, jhb Approved by: jhb, kostikbel Differential Revision: https://reviews.freebsd.org/D1802
2015-02-14 22:12:17 +00:00
if (ALWAYS_RESTORE_CONTROLLER(sc->kbdc))
restore_controller(sc->kbdc, command_byte);
Clean up and fix style(9) nits.
2008-04-08 19:09:45 +00:00
if (verbose)
printf("psm%d: the aux port is not functioning (%d).\n",
unit, i);
endprobe(ENXIO);
}
if (sc->config & PSM_CONFIG_NORESET) {
/*
* Don't try to reset the pointing device. It may possibly be
Various small typos and grammar nits in comments.
2010-11-18 22:17:20 +00:00
* left in an unknown state, though...
Clean up and fix style(9) nits.
2008-04-08 19:09:45 +00:00
*/
} else {
/*
* NOTE: some controllers appears to hang the `keyboard' when
* the aux port doesn't exist and `PSMC_RESET_DEV' is issued.
*
* Attempt to reset the controller twice -- this helps
* pierce through some KVM switches. The second reset
* is non-fatal.
*/
if (!reset_aux_dev(sc->kbdc)) {
recover_from_error(sc->kbdc);
Quirk based support of Chromebook keyboard found in Acer C720 This probably supports other devices based on SeaBIOS, which need to be added to the smbios based quirks table. The functionality has been ported from DragonFlyBSD and adapted to FreeBSD's more general purpose environment. Devices not covered by a quirk shouldn't be affected at all. Thanks to jhb and kostikbel for reviewing the code. Reviewed by: kostikbel, jhb Approved by: jhb, kostikbel Differential Revision: https://reviews.freebsd.org/D1802
2015-02-14 22:12:17 +00:00
if (ALWAYS_RESTORE_CONTROLLER(sc->kbdc))
restore_controller(sc->kbdc, command_byte);
Clean up and fix style(9) nits.
2008-04-08 19:09:45 +00:00
if (verbose)
printf("psm%d: failed to reset the aux "
"device.\n", unit);
endprobe(ENXIO);
} else if (!reset_aux_dev(sc->kbdc)) {
recover_from_error(sc->kbdc);
if (verbose >= 2)
printf("psm%d: failed to reset the aux device "
"(2).\n", unit);
}
}
/*
Various small typos and grammar nits in comments.
2010-11-18 22:17:20 +00:00
* both the aux port and the aux device are functioning, see if the
Clean up and fix style(9) nits.
2008-04-08 19:09:45 +00:00
* device can be enabled. NOTE: when enabled, the device will start
* sending data; we shall immediately disable the device once we know
* the device can be enabled.
*/
if (!enable_aux_dev(sc->kbdc) || !disable_aux_dev(sc->kbdc)) {
/* MOUSE ERROR */
recover_from_error(sc->kbdc);
Quirk based support of Chromebook keyboard found in Acer C720 This probably supports other devices based on SeaBIOS, which need to be added to the smbios based quirks table. The functionality has been ported from DragonFlyBSD and adapted to FreeBSD's more general purpose environment. Devices not covered by a quirk shouldn't be affected at all. Thanks to jhb and kostikbel for reviewing the code. Reviewed by: kostikbel, jhb Approved by: jhb, kostikbel Differential Revision: https://reviews.freebsd.org/D1802
2015-02-14 22:12:17 +00:00
if (ALWAYS_RESTORE_CONTROLLER(sc->kbdc))
restore_controller(sc->kbdc, command_byte);
Clean up and fix style(9) nits.
2008-04-08 19:09:45 +00:00
if (verbose)
printf("psm%d: failed to enable the aux device.\n",
unit);
endprobe(ENXIO);
}
/* save the default values after reset */
if (get_mouse_status(sc->kbdc, stat, 0, 3) >= 3) {
sc->dflt_mode.rate = sc->mode.rate = stat[2];
sc->dflt_mode.resolution = sc->mode.resolution = stat[1];
} else {
sc->dflt_mode.rate = sc->mode.rate = -1;
sc->dflt_mode.resolution = sc->mode.resolution = -1;
}
/* hardware information */
sc->hw.iftype = MOUSE_IF_PS2;
/* verify the device is a mouse */
sc->hw.hwid = get_aux_id(sc->kbdc);
if (!is_a_mouse(sc->hw.hwid)) {
Quirk based support of Chromebook keyboard found in Acer C720 This probably supports other devices based on SeaBIOS, which need to be added to the smbios based quirks table. The functionality has been ported from DragonFlyBSD and adapted to FreeBSD's more general purpose environment. Devices not covered by a quirk shouldn't be affected at all. Thanks to jhb and kostikbel for reviewing the code. Reviewed by: kostikbel, jhb Approved by: jhb, kostikbel Differential Revision: https://reviews.freebsd.org/D1802
2015-02-14 22:12:17 +00:00
if (ALWAYS_RESTORE_CONTROLLER(sc->kbdc))
restore_controller(sc->kbdc, command_byte);
Clean up and fix style(9) nits.
2008-04-08 19:09:45 +00:00
if (verbose)
printf("psm%d: unknown device type (%d).\n", unit,
sc->hw.hwid);
endprobe(ENXIO);
}
switch (sc->hw.hwid) {
case PSM_BALLPOINT_ID:
sc->hw.type = MOUSE_TRACKBALL;
break;
case PSM_MOUSE_ID:
case PSM_INTELLI_ID:
case PSM_EXPLORER_ID:
case PSM_4DMOUSE_ID:
case PSM_4DPLUS_ID:
sc->hw.type = MOUSE_MOUSE;
break;
default:
sc->hw.type = MOUSE_UNKNOWN;
break;
}
if (sc->config & PSM_CONFIG_NOIDPROBE) {
sc->hw.buttons = 2;
i = GENERIC_MOUSE_ENTRY;
} else {
/* # of buttons */
sc->hw.buttons = get_mouse_buttons(sc->kbdc);
/* other parameters */
for (i = 0; vendortype[i].probefunc != NULL; ++i)
Unbreak mouse on resume on Thinkpads when hw.psm.trackpoint_support=0, which is default. It was broken in r281441. It appears that set_trackpoint_parameters() call on resume disables the mouse. So, we need not call it on resume if hw.psm.trackpoint_support=0. The problem is that the probe functions are used both for probing and for reiniting on resume. And the absense of the softc parameter is used as a mark to distinguish reinit and probe, which is quite ugly. At the same time the softc parameter is needed to call set_trackpoint_parameters(). o Change the arguments of probefunc_t to always supply the softc, and use additional enum argument to tell probing from initing. o Don't call set_trackpoint_parameters() from global doinitialize(), instead call it from the enable_trackpoint() only. o In enable_synaptics() call enable_trackpoint() in both probe and reinit cases. Together with: Jan Kokemüller <jan.kokemueller gmail.com>
2015-06-12 13:57:04 +00:00
if ((*vendortype[i].probefunc)(sc, PROBE)) {
Clean up and fix style(9) nits.
2008-04-08 19:09:45 +00:00
if (verbose >= 2)
printf("psm%d: found %s\n", unit,
model_name(vendortype[i].model));
break;
}
}
sc->hw.model = vendortype[i].model;
sc->dflt_mode.level = PSM_LEVEL_BASE;
sc->dflt_mode.packetsize = MOUSE_PS2_PACKETSIZE;
sc->dflt_mode.accelfactor = (sc->config & PSM_CONFIG_ACCEL) >> 4;
if (sc->config & PSM_CONFIG_NOCHECKSYNC)
sc->dflt_mode.syncmask[0] = 0;
else
sc->dflt_mode.syncmask[0] = vendortype[i].syncmask;
if (sc->config & PSM_CONFIG_FORCETAP)
sc->dflt_mode.syncmask[0] &= ~MOUSE_PS2_TAP;
sc->dflt_mode.syncmask[1] = 0; /* syncbits */
sc->mode = sc->dflt_mode;
sc->mode.packetsize = vendortype[i].packetsize;
/* set mouse parameters */
Implement a kludge for some wheeled mice for which infamous "psmintr: out of sync..." messages is generated and the wheel movement is not recognized. The trick is found by Takashi Nishida.
1999-07-12 13:40:21 +00:00
#if 0
Clean up and fix style(9) nits.
2008-04-08 19:09:45 +00:00
/*
* A version of Logitech FirstMouse+ won't report wheel movement,
* if SET_DEFAULTS is sent... Don't use this command.
* This fix was found by Takashi Nishida.
*/
i = send_aux_command(sc->kbdc, PSMC_SET_DEFAULTS);
if (verbose >= 2)
printf("psm%d: SET_DEFAULTS return code:%04x\n", unit, i);
Implement a kludge for some wheeled mice for which infamous "psmintr: out of sync..." messages is generated and the wheel movement is not recognized. The trick is found by Takashi Nishida.
1999-07-12 13:40:21 +00:00
#endif
Clean up and fix style(9) nits.
2008-04-08 19:09:45 +00:00
if (sc->config & PSM_CONFIG_RESOLUTION)
sc->mode.resolution =
set_mouse_resolution(sc->kbdc,
(sc->config & PSM_CONFIG_RESOLUTION) - 1);
else if (sc->mode.resolution >= 0)
sc->mode.resolution =
set_mouse_resolution(sc->kbdc, sc->dflt_mode.resolution);
if (sc->mode.rate > 0)
sc->mode.rate =
set_mouse_sampling_rate(sc->kbdc, sc->dflt_mode.rate);
set_mouse_scaling(sc->kbdc, 1);
/* Record sync on the next data packet we see. */
sc->flags |= PSM_NEED_SYNCBITS;
/* just check the status of the mouse */
/*
* NOTE: XXX there are some arcane controller/mouse combinations out
* there, which hung the controller unless there is data transmission
* after ACK from the mouse.
Port the ps/2 mouse driver to the alpha.
1998-11-08 18:43:03 +00:00
*/
Clean up and fix style(9) nits.
2008-04-08 19:09:45 +00:00
if (get_mouse_status(sc->kbdc, stat, 0, 3) < 3)
printf("psm%d: failed to get status.\n", unit);
else {
/*
* When in its native mode, some mice operate with different
* default parameters than in the PS/2 compatible mode.
*/
sc->dflt_mode.rate = sc->mode.rate = stat[2];
sc->dflt_mode.resolution = sc->mode.resolution = stat[1];
}
Port the ps/2 mouse driver to the alpha.
1998-11-08 18:43:03 +00:00
Clean up and fix style(9) nits.
2008-04-08 19:09:45 +00:00
/* disable the aux port for now... */
if (!set_controller_command_byte(sc->kbdc,
Port the ps/2 mouse driver to the alpha.
1998-11-08 18:43:03 +00:00
KBD_KBD_CONTROL_BITS | KBD_AUX_CONTROL_BITS,
Clean up and fix style(9) nits.
2008-04-08 19:09:45 +00:00
(command_byte & KBD_KBD_CONTROL_BITS) |
KBD_DISABLE_AUX_PORT | KBD_DISABLE_AUX_INT)) {
/*
* this is CONTROLLER ERROR; I don't know the proper way to
* recover from this error...
*/
Quirk based support of Chromebook keyboard found in Acer C720 This probably supports other devices based on SeaBIOS, which need to be added to the smbios based quirks table. The functionality has been ported from DragonFlyBSD and adapted to FreeBSD's more general purpose environment. Devices not covered by a quirk shouldn't be affected at all. Thanks to jhb and kostikbel for reviewing the code. Reviewed by: kostikbel, jhb Approved by: jhb, kostikbel Differential Revision: https://reviews.freebsd.org/D1802
2015-02-14 22:12:17 +00:00
if (ALWAYS_RESTORE_CONTROLLER(sc->kbdc))
restore_controller(sc->kbdc, command_byte);
Clean up and fix style(9) nits.
2008-04-08 19:09:45 +00:00
printf("psm%d: unable to set the command byte.\n", unit);
endprobe(ENXIO);
}
/* done */
kbdc_set_device_mask(sc->kbdc, mask | KBD_AUX_CONTROL_BITS);
kbdc_lock(sc->kbdc, FALSE);
return (0);
Port the ps/2 mouse driver to the alpha.
1998-11-08 18:43:03 +00:00
}
static int
psmattach(device_t dev)
{
Clean up and fix style(9) nits.
2008-04-08 19:09:45 +00:00
int unit = device_get_unit(dev);
struct psm_softc *sc = device_get_softc(dev);
int error;
int rid;
/* Setup initial state */
sc->state = PSM_VALID;
Use callout(9) instead of timeout(9) to manage timers.
2012-09-07 19:42:36 +00:00
callout_init(&sc->callout, 0);
callout_init(&sc->softcallout, 0);
Clean up and fix style(9) nits.
2008-04-08 19:09:45 +00:00
/* Setup our interrupt handler */
rid = KBDC_RID_AUX;
- When moving the IRQ resource from the psmcpnp device to the psm device, delete the IRQ resource from the psmcpnp device completely. - Don't allocate the IRQ resource shared. It is not a shareable interrupt on ISA. The bus driver can set RF_SHAREABLE if the IRQ is actually shareable on a non-ISA bus.
2010-12-16 17:08:43 +00:00
sc->intr = bus_alloc_resource_any(dev, SYS_RES_IRQ, &rid, RF_ACTIVE);
Clean up and fix style(9) nits.
2008-04-08 19:09:45 +00:00
if (sc->intr == NULL)
return (ENXIO);
error = bus_setup_intr(dev, sc->intr, INTR_TYPE_TTY, NULL, psmintr, sc,
&sc->ih);
if (error) {
bus_release_resource(dev, SYS_RES_IRQ, rid, sc->intr);
return (error);
}
/* Done */
Let psm(4) use si_drv1 to refer to its softc.
2010-09-09 07:52:15 +00:00
sc->dev = make_dev(&psm_cdevsw, 0, 0, 0, 0666, "psm%d", unit);
sc->dev->si_drv1 = sc;
sc->bdev = make_dev(&psm_cdevsw, 0, 0, 0, 0666, "bpsm%d", unit);
sc->bdev->si_drv1 = sc;
Clean up and fix style(9) nits.
2008-04-08 19:09:45 +00:00
- Do not clobber softc when psm(4) is reintialized. - Make INITAFTERSUSPEND flag independent of HOOKRESUME flag. - Automatically set INITAFTERSUSPEND flag when ALPS GlidePoint is detected. - Always probe Synaptics Touchpad. Allow MOUSE_SYN_GETHWINFO ioctl and automatically set INITAFTERSUSPEND flag when a supported device is detected, regardless of "hw.psm.synaptics_support" tunable setting. - Update psm(4) to reflect the above changes. - Remove long-time defunct SYNCHACK flag while I am in the neighborhood. MFC after: 1 month
2012-03-27 23:43:01 +00:00
/* Some touchpad devices need full reinitialization after suspend. */
switch (sc->hw.model) {
case MOUSE_MODEL_SYNAPTICS:
case MOUSE_MODEL_GLIDEPOINT:
case MOUSE_MODEL_VERSAPAD:
sc->config |= PSM_CONFIG_INITAFTERSUSPEND;
break;
default:
Add preliminary support for IBM/Lenovo TrackPoint. PR: kern/147237 (based on the initial patch for 8.x) Tested by: glebius (device detection and suspend/resume) MFC after: 1 month
2013-03-18 23:22:47 +00:00
if (sc->synhw.infoMajor >= 4 || sc->tphw > 0)
- Do not clobber softc when psm(4) is reintialized. - Make INITAFTERSUSPEND flag independent of HOOKRESUME flag. - Automatically set INITAFTERSUSPEND flag when ALPS GlidePoint is detected. - Always probe Synaptics Touchpad. Allow MOUSE_SYN_GETHWINFO ioctl and automatically set INITAFTERSUSPEND flag when a supported device is detected, regardless of "hw.psm.synaptics_support" tunable setting. - Update psm(4) to reflect the above changes. - Remove long-time defunct SYNCHACK flag while I am in the neighborhood. MFC after: 1 month
2012-03-27 23:43:01 +00:00
sc->config |= PSM_CONFIG_INITAFTERSUSPEND;
break;
}
Clean up and fix style(9) nits.
2008-04-08 19:09:45 +00:00
if (!verbose)
printf("psm%d: model %s, device ID %d\n",
unit, model_name(sc->hw.model), sc->hw.hwid & 0x00ff);
else {
printf("psm%d: model %s, device ID %d-%02x, %d buttons\n",
unit, model_name(sc->hw.model), sc->hw.hwid & 0x00ff,
sc->hw.hwid >> 8, sc->hw.buttons);
printf("psm%d: config:%08x, flags:%08x, packet size:%d\n",
unit, sc->config, sc->flags, sc->mode.packetsize);
printf("psm%d: syncmask:%02x, syncbits:%02x\n",
unit, sc->mode.syncmask[0], sc->mode.syncmask[1]);
}
if (bootverbose)
--verbose;
return (0);
Port the ps/2 mouse driver to the alpha.
1998-11-08 18:43:03 +00:00
}
- Add Support for the following PS/2 mice: - Microsoft IntelliMouse Explorer: 2 buttons on top, 2 side buttons and a wheel which also acts as the middle button. The mouse is recognized as "IntelliMouse Explorer". - Genius NetScroll Optical: 2 buttons on top, 2 side buttons and a wheel which also acts as the middle button. The mouse is recognized as "NetMouse/NetScroll Optical". - MouseSystems SmartScroll Mouse (OEM from Genius?): 3 buttons on top, 1 side button and a wheel. The mouse is recognized as Genius "NetScroll". - IBM ScrollPoint: 2 buttons on top and a stick between the buttons. The stick can perform "horizontal scroll" in W*ndows environment. The horizontal movement of the stick is detected. It is currently mapped to the Z axis movement in the same way as the first wheel. The mouse is recognized as "MouseMan+", as it is considered to be a variation of MouseMan. - A4 Tech 4D and 4D+ mice. These mice have two wheels! The movement of the second wheel is reported as the Z axis movement in the same way as the first wheel. These mice are recognized as "4D Mouse" and "4D+ Mouse". - Tweak IntelliMouse support code a bit so that less-than-compatible wheel mice can work properly with the psm driver. - Add driver configuration flags which correspond to the kernel options PSM_HOOKRESUME and PSM_RESETAFTERSUSPEND, so that we don't need to recompile the kernel when we need these functions. - Properly keep track of the irq resource. - Add a watchdog timer in case interrupts are lost (experimental). - Add `detach' function (experimental).
2000-03-18 15:21:40 +00:00
static int
psmdetach(device_t dev)
{
Clean up and fix style(9) nits.
2008-04-08 19:09:45 +00:00
struct psm_softc *sc;
int rid;
- Add Support for the following PS/2 mice: - Microsoft IntelliMouse Explorer: 2 buttons on top, 2 side buttons and a wheel which also acts as the middle button. The mouse is recognized as "IntelliMouse Explorer". - Genius NetScroll Optical: 2 buttons on top, 2 side buttons and a wheel which also acts as the middle button. The mouse is recognized as "NetMouse/NetScroll Optical". - MouseSystems SmartScroll Mouse (OEM from Genius?): 3 buttons on top, 1 side button and a wheel. The mouse is recognized as Genius "NetScroll". - IBM ScrollPoint: 2 buttons on top and a stick between the buttons. The stick can perform "horizontal scroll" in W*ndows environment. The horizontal movement of the stick is detected. It is currently mapped to the Z axis movement in the same way as the first wheel. The mouse is recognized as "MouseMan+", as it is considered to be a variation of MouseMan. - A4 Tech 4D and 4D+ mice. These mice have two wheels! The movement of the second wheel is reported as the Z axis movement in the same way as the first wheel. These mice are recognized as "4D Mouse" and "4D+ Mouse". - Tweak IntelliMouse support code a bit so that less-than-compatible wheel mice can work properly with the psm driver. - Add driver configuration flags which correspond to the kernel options PSM_HOOKRESUME and PSM_RESETAFTERSUSPEND, so that we don't need to recompile the kernel when we need these functions. - Properly keep track of the irq resource. - Add a watchdog timer in case interrupts are lost (experimental). - Add `detach' function (experimental).
2000-03-18 15:21:40 +00:00
Clean up and fix style(9) nits.
2008-04-08 19:09:45 +00:00
sc = device_get_softc(dev);
if (sc->state & PSM_OPEN)
return (EBUSY);
- Add Support for the following PS/2 mice: - Microsoft IntelliMouse Explorer: 2 buttons on top, 2 side buttons and a wheel which also acts as the middle button. The mouse is recognized as "IntelliMouse Explorer". - Genius NetScroll Optical: 2 buttons on top, 2 side buttons and a wheel which also acts as the middle button. The mouse is recognized as "NetMouse/NetScroll Optical". - MouseSystems SmartScroll Mouse (OEM from Genius?): 3 buttons on top, 1 side button and a wheel. The mouse is recognized as Genius "NetScroll". - IBM ScrollPoint: 2 buttons on top and a stick between the buttons. The stick can perform "horizontal scroll" in W*ndows environment. The horizontal movement of the stick is detected. It is currently mapped to the Z axis movement in the same way as the first wheel. The mouse is recognized as "MouseMan+", as it is considered to be a variation of MouseMan. - A4 Tech 4D and 4D+ mice. These mice have two wheels! The movement of the second wheel is reported as the Z axis movement in the same way as the first wheel. These mice are recognized as "4D Mouse" and "4D+ Mouse". - Tweak IntelliMouse support code a bit so that less-than-compatible wheel mice can work properly with the psm driver. - Add driver configuration flags which correspond to the kernel options PSM_HOOKRESUME and PSM_RESETAFTERSUSPEND, so that we don't need to recompile the kernel when we need these functions. - Properly keep track of the irq resource. - Add a watchdog timer in case interrupts are lost (experimental). - Add `detach' function (experimental).
2000-03-18 15:21:40 +00:00
Clean up and fix style(9) nits.
2008-04-08 19:09:45 +00:00
rid = KBDC_RID_AUX;
bus_teardown_intr(dev, sc->intr, sc->ih);
bus_release_resource(dev, SYS_RES_IRQ, rid, sc->intr);
- Add Support for the following PS/2 mice: - Microsoft IntelliMouse Explorer: 2 buttons on top, 2 side buttons and a wheel which also acts as the middle button. The mouse is recognized as "IntelliMouse Explorer". - Genius NetScroll Optical: 2 buttons on top, 2 side buttons and a wheel which also acts as the middle button. The mouse is recognized as "NetMouse/NetScroll Optical". - MouseSystems SmartScroll Mouse (OEM from Genius?): 3 buttons on top, 1 side button and a wheel. The mouse is recognized as Genius "NetScroll". - IBM ScrollPoint: 2 buttons on top and a stick between the buttons. The stick can perform "horizontal scroll" in W*ndows environment. The horizontal movement of the stick is detected. It is currently mapped to the Z axis movement in the same way as the first wheel. The mouse is recognized as "MouseMan+", as it is considered to be a variation of MouseMan. - A4 Tech 4D and 4D+ mice. These mice have two wheels! The movement of the second wheel is reported as the Z axis movement in the same way as the first wheel. These mice are recognized as "4D Mouse" and "4D+ Mouse". - Tweak IntelliMouse support code a bit so that less-than-compatible wheel mice can work properly with the psm driver. - Add driver configuration flags which correspond to the kernel options PSM_HOOKRESUME and PSM_RESETAFTERSUSPEND, so that we don't need to recompile the kernel when we need these functions. - Properly keep track of the irq resource. - Add a watchdog timer in case interrupts are lost (experimental). - Add `detach' function (experimental).
2000-03-18 15:21:40 +00:00
Clean up and fix style(9) nits.
2008-04-08 19:09:45 +00:00
destroy_dev(sc->dev);
destroy_dev(sc->bdev);
- Add Support for the following PS/2 mice: - Microsoft IntelliMouse Explorer: 2 buttons on top, 2 side buttons and a wheel which also acts as the middle button. The mouse is recognized as "IntelliMouse Explorer". - Genius NetScroll Optical: 2 buttons on top, 2 side buttons and a wheel which also acts as the middle button. The mouse is recognized as "NetMouse/NetScroll Optical". - MouseSystems SmartScroll Mouse (OEM from Genius?): 3 buttons on top, 1 side button and a wheel. The mouse is recognized as Genius "NetScroll". - IBM ScrollPoint: 2 buttons on top and a stick between the buttons. The stick can perform "horizontal scroll" in W*ndows environment. The horizontal movement of the stick is detected. It is currently mapped to the Z axis movement in the same way as the first wheel. The mouse is recognized as "MouseMan+", as it is considered to be a variation of MouseMan. - A4 Tech 4D and 4D+ mice. These mice have two wheels! The movement of the second wheel is reported as the Z axis movement in the same way as the first wheel. These mice are recognized as "4D Mouse" and "4D+ Mouse". - Tweak IntelliMouse support code a bit so that less-than-compatible wheel mice can work properly with the psm driver. - Add driver configuration flags which correspond to the kernel options PSM_HOOKRESUME and PSM_RESETAFTERSUSPEND, so that we don't need to recompile the kernel when we need these functions. - Properly keep track of the irq resource. - Add a watchdog timer in case interrupts are lost (experimental). - Add `detach' function (experimental).
2000-03-18 15:21:40 +00:00
Use callout(9) instead of timeout(9) to manage timers.
2012-09-07 19:42:36 +00:00
callout_drain(&sc->callout);
callout_drain(&sc->softcallout);
Clean up and fix style(9) nits.
2008-04-08 19:09:45 +00:00
return (0);
- Add Support for the following PS/2 mice: - Microsoft IntelliMouse Explorer: 2 buttons on top, 2 side buttons and a wheel which also acts as the middle button. The mouse is recognized as "IntelliMouse Explorer". - Genius NetScroll Optical: 2 buttons on top, 2 side buttons and a wheel which also acts as the middle button. The mouse is recognized as "NetMouse/NetScroll Optical". - MouseSystems SmartScroll Mouse (OEM from Genius?): 3 buttons on top, 1 side button and a wheel. The mouse is recognized as Genius "NetScroll". - IBM ScrollPoint: 2 buttons on top and a stick between the buttons. The stick can perform "horizontal scroll" in W*ndows environment. The horizontal movement of the stick is detected. It is currently mapped to the Z axis movement in the same way as the first wheel. The mouse is recognized as "MouseMan+", as it is considered to be a variation of MouseMan. - A4 Tech 4D and 4D+ mice. These mice have two wheels! The movement of the second wheel is reported as the Z axis movement in the same way as the first wheel. These mice are recognized as "4D Mouse" and "4D+ Mouse". - Tweak IntelliMouse support code a bit so that less-than-compatible wheel mice can work properly with the psm driver. - Add driver configuration flags which correspond to the kernel options PSM_HOOKRESUME and PSM_RESETAFTERSUSPEND, so that we don't need to recompile the kernel when we need these functions. - Properly keep track of the irq resource. - Add a watchdog timer in case interrupts are lost (experimental). - Add `detach' function (experimental).
2000-03-18 15:21:40 +00:00
}
Port the ps/2 mouse driver to the alpha.
1998-11-08 18:43:03 +00:00
static int
Do the dreaded s/dev_t/struct cdev */ Bump __FreeBSD_version accordingly.
2004-06-16 09:47:26 +00:00
psmopen(struct cdev *dev, int flag, int fmt, struct thread *td)
Port the ps/2 mouse driver to the alpha.
1998-11-08 18:43:03 +00:00
{
Clean up and fix style(9) nits.
2008-04-08 19:09:45 +00:00
struct psm_softc *sc;
int command_byte;
int err;
int s;
/* Get device data */
Let psm(4) use si_drv1 to refer to its softc.
2010-09-09 07:52:15 +00:00
sc = dev->si_drv1;
Clean up and fix style(9) nits.
2008-04-08 19:09:45 +00:00
if ((sc == NULL) || (sc->state & PSM_VALID) == 0) {
/* the device is no longer valid/functioning */
return (ENXIO);
}
/* Disallow multiple opens */
if (sc->state & PSM_OPEN)
return (EBUSY);
Let psm(4) use si_drv1 to refer to its softc.
2010-09-09 07:52:15 +00:00
device_busy(devclass_get_device(psm_devclass, sc->unit));
Clean up and fix style(9) nits.
2008-04-08 19:09:45 +00:00
/* Initialize state */
sc->mode.level = sc->dflt_mode.level;
sc->mode.protocol = sc->dflt_mode.protocol;
sc->watchdog = FALSE;
Teach psm about O_ASYNC This makes Xorg happy if you aren't using moused. MFC after: 3 days
2009-03-16 08:21:51 +00:00
sc->async = NULL;
Clean up and fix style(9) nits.
2008-04-08 19:09:45 +00:00
/* flush the event queue */
sc->queue.count = 0;
sc->queue.head = 0;
sc->queue.tail = 0;
sc->status.flags = 0;
sc->status.button = 0;
sc->status.obutton = 0;
sc->status.dx = 0;
sc->status.dy = 0;
sc->status.dz = 0;
sc->button = 0;
sc->pqueue_start = 0;
sc->pqueue_end = 0;
/* empty input buffer */
flushpackets(sc);
sc->syncerrors = 0;
sc->pkterrors = 0;
/* don't let timeout routines in the keyboard driver to poll the kbdc */
if (!kbdc_lock(sc->kbdc, TRUE))
return (EIO);
/* save the current controller command byte */
s = spltty();
command_byte = get_controller_command_byte(sc->kbdc);
/* enable the aux port and temporalily disable the keyboard */
if (command_byte == -1 || !set_controller_command_byte(sc->kbdc,
Port the ps/2 mouse driver to the alpha.
1998-11-08 18:43:03 +00:00
kbdc_get_device_mask(sc->kbdc),
Clean up and fix style(9) nits.
2008-04-08 19:09:45 +00:00
KBD_DISABLE_KBD_PORT | KBD_DISABLE_KBD_INT |
KBD_ENABLE_AUX_PORT | KBD_DISABLE_AUX_INT)) {
/* CONTROLLER ERROR; do you know how to get out of this? */
kbdc_lock(sc->kbdc, FALSE);
splx(s);
log(LOG_ERR,
Let psm(4) use si_drv1 to refer to its softc.
2010-09-09 07:52:15 +00:00
"psm%d: unable to set the command byte (psmopen).\n",
sc->unit);
Clean up and fix style(9) nits.
2008-04-08 19:09:45 +00:00
return (EIO);
}
/*
* Now that the keyboard controller is told not to generate
* the keyboard and mouse interrupts, call `splx()' to allow
* the other tty interrupts. The clock interrupt may also occur,
* but timeout routines will be blocked by the poll flag set
* via `kbdc_lock()'
*/
Port the ps/2 mouse driver to the alpha.
1998-11-08 18:43:03 +00:00
splx(s);
Clean up and fix style(9) nits.
2008-04-08 19:09:45 +00:00
/* enable the mouse device */
err = doopen(sc, command_byte);
/* done */
if (err == 0)
sc->state |= PSM_OPEN;
kbdc_lock(sc->kbdc, FALSE);
return (err);
Port the ps/2 mouse driver to the alpha.
1998-11-08 18:43:03 +00:00
}
static int
Do the dreaded s/dev_t/struct cdev */ Bump __FreeBSD_version accordingly.
2004-06-16 09:47:26 +00:00
psmclose(struct cdev *dev, int flag, int fmt, struct thread *td)
Port the ps/2 mouse driver to the alpha.
1998-11-08 18:43:03 +00:00
{
Let psm(4) use si_drv1 to refer to its softc.
2010-09-09 07:52:15 +00:00
struct psm_softc *sc = dev->si_drv1;
Clean up and fix style(9) nits.
2008-04-08 19:09:45 +00:00
int stat[3];
int command_byte;
int s;
/* don't let timeout routines in the keyboard driver to poll the kbdc */
if (!kbdc_lock(sc->kbdc, TRUE))
return (EIO);
/* save the current controller command byte */
s = spltty();
command_byte = get_controller_command_byte(sc->kbdc);
if (command_byte == -1) {
kbdc_lock(sc->kbdc, FALSE);
splx(s);
return (EIO);
}
Port the ps/2 mouse driver to the alpha.
1998-11-08 18:43:03 +00:00
Clean up and fix style(9) nits.
2008-04-08 19:09:45 +00:00
/* disable the aux interrupt and temporalily disable the keyboard */
if (!set_controller_command_byte(sc->kbdc,
Port the ps/2 mouse driver to the alpha.
1998-11-08 18:43:03 +00:00
kbdc_get_device_mask(sc->kbdc),
Clean up and fix style(9) nits.
2008-04-08 19:09:45 +00:00
KBD_DISABLE_KBD_PORT | KBD_DISABLE_KBD_INT |
KBD_ENABLE_AUX_PORT | KBD_DISABLE_AUX_INT)) {
log(LOG_ERR,
Let psm(4) use si_drv1 to refer to its softc.
2010-09-09 07:52:15 +00:00
"psm%d: failed to disable the aux int (psmclose).\n",
sc->unit);
Clean up and fix style(9) nits.
2008-04-08 19:09:45 +00:00
/* CONTROLLER ERROR;
* NOTE: we shall force our way through. Because the only
* ill effect we shall see is that we may not be able
* to read ACK from the mouse, and it doesn't matter much
* so long as the mouse will accept the DISABLE command.
*/
}
splx(s);
/* stop the watchdog timer */
Use callout(9) instead of timeout(9) to manage timers.
2012-09-07 19:42:36 +00:00
callout_stop(&sc->callout);
Clean up and fix style(9) nits.
2008-04-08 19:09:45 +00:00
/* remove anything left in the output buffer */
empty_aux_buffer(sc->kbdc, 10);
/* disable the aux device, port and interrupt */
if (sc->state & PSM_VALID) {
if (!disable_aux_dev(sc->kbdc)) {
/* MOUSE ERROR;
* NOTE: we don't return (error) and continue,
* pretending we have successfully disabled the device.
* It's OK because the interrupt routine will discard
* any data from the mouse hereafter.
*/
log(LOG_ERR,
"psm%d: failed to disable the device (psmclose).\n",
Let psm(4) use si_drv1 to refer to its softc.
2010-09-09 07:52:15 +00:00
sc->unit);
Clean up and fix style(9) nits.
2008-04-08 19:09:45 +00:00
}
if (get_mouse_status(sc->kbdc, stat, 0, 3) < 3)
log(LOG_DEBUG,
Let psm(4) use si_drv1 to refer to its softc.
2010-09-09 07:52:15 +00:00
"psm%d: failed to get status (psmclose).\n",
sc->unit);
Clean up and fix style(9) nits.
2008-04-08 19:09:45 +00:00
}
if (!set_controller_command_byte(sc->kbdc,
Port the ps/2 mouse driver to the alpha.
1998-11-08 18:43:03 +00:00
kbdc_get_device_mask(sc->kbdc),
Clean up and fix style(9) nits.
2008-04-08 19:09:45 +00:00
(command_byte & KBD_KBD_CONTROL_BITS) |
KBD_DISABLE_AUX_PORT | KBD_DISABLE_AUX_INT)) {
/*
* CONTROLLER ERROR;
* we shall ignore this error; see the above comment.
*/
log(LOG_ERR,
"psm%d: failed to disable the aux port (psmclose).\n",
Let psm(4) use si_drv1 to refer to its softc.
2010-09-09 07:52:15 +00:00
sc->unit);
Clean up and fix style(9) nits.
2008-04-08 19:09:45 +00:00
}
/* remove anything left in the output buffer */
empty_aux_buffer(sc->kbdc, 10);
Teach psm about O_ASYNC This makes Xorg happy if you aren't using moused. MFC after: 3 days
2009-03-16 08:21:51 +00:00
/* clean up and sigio requests */
if (sc->async != NULL) {
funsetown(&sc->async);
sc->async = NULL;
}
Clean up and fix style(9) nits.
2008-04-08 19:09:45 +00:00
/* close is almost always successful */
sc->state &= ~PSM_OPEN;
kbdc_lock(sc->kbdc, FALSE);
Let psm(4) use si_drv1 to refer to its softc.
2010-09-09 07:52:15 +00:00
device_unbusy(devclass_get_device(psm_devclass, sc->unit));
Clean up and fix style(9) nits.
2008-04-08 19:09:45 +00:00
return (0);
Port the ps/2 mouse driver to the alpha.
1998-11-08 18:43:03 +00:00
}
static int
Clean up and fix style(9) nits.
2008-04-08 19:09:45 +00:00
tame_mouse(struct psm_softc *sc, packetbuf_t *pb, mousestatus_t *status,
u_char *buf)
Port the ps/2 mouse driver to the alpha.
1998-11-08 18:43:03 +00:00
{
Clean up and fix style(9) nits.
2008-04-08 19:09:45 +00:00
static u_char butmapps2[8] = {
0,
MOUSE_PS2_BUTTON1DOWN,
MOUSE_PS2_BUTTON2DOWN,
MOUSE_PS2_BUTTON1DOWN | MOUSE_PS2_BUTTON2DOWN,
MOUSE_PS2_BUTTON3DOWN,
MOUSE_PS2_BUTTON1DOWN | MOUSE_PS2_BUTTON3DOWN,
MOUSE_PS2_BUTTON2DOWN | MOUSE_PS2_BUTTON3DOWN,
MOUSE_PS2_BUTTON1DOWN | MOUSE_PS2_BUTTON2DOWN |
MOUSE_PS2_BUTTON3DOWN,
};
static u_char butmapmsc[8] = {
MOUSE_MSC_BUTTON1UP | MOUSE_MSC_BUTTON2UP |
MOUSE_MSC_BUTTON3UP,
MOUSE_MSC_BUTTON2UP | MOUSE_MSC_BUTTON3UP,
MOUSE_MSC_BUTTON1UP | MOUSE_MSC_BUTTON3UP,
MOUSE_MSC_BUTTON3UP,
MOUSE_MSC_BUTTON1UP | MOUSE_MSC_BUTTON2UP,
MOUSE_MSC_BUTTON2UP,
MOUSE_MSC_BUTTON1UP,
0,
};
int mapped;
int i;
if (sc->mode.level == PSM_LEVEL_BASE) {
mapped = status->button & ~MOUSE_BUTTON4DOWN;
if (status->button & MOUSE_BUTTON4DOWN)
mapped |= MOUSE_BUTTON1DOWN;
status->button = mapped;
buf[0] = MOUSE_PS2_SYNC | butmapps2[mapped & MOUSE_STDBUTTONS];
i = imax(imin(status->dx, 255), -256);
if (i < 0)
buf[0] |= MOUSE_PS2_XNEG;
buf[1] = i;
i = imax(imin(status->dy, 255), -256);
if (i < 0)
buf[0] |= MOUSE_PS2_YNEG;
buf[2] = i;
return (MOUSE_PS2_PACKETSIZE);
} else if (sc->mode.level == PSM_LEVEL_STANDARD) {
buf[0] = MOUSE_MSC_SYNC |
butmapmsc[status->button & MOUSE_STDBUTTONS];
i = imax(imin(status->dx, 255), -256);
buf[1] = i >> 1;
buf[3] = i - buf[1];
i = imax(imin(status->dy, 255), -256);
buf[2] = i >> 1;
buf[4] = i - buf[2];
i = imax(imin(status->dz, 127), -128);
buf[5] = (i >> 1) & 0x7f;
buf[6] = (i - (i >> 1)) & 0x7f;
buf[7] = (~status->button >> 3) & 0x7f;
return (MOUSE_SYS_PACKETSIZE);
}
return (pb->inputbytes);
Port the ps/2 mouse driver to the alpha.
1998-11-08 18:43:03 +00:00
}
static int
Do the dreaded s/dev_t/struct cdev */ Bump __FreeBSD_version accordingly.
2004-06-16 09:47:26 +00:00
psmread(struct cdev *dev, struct uio *uio, int flag)
Port the ps/2 mouse driver to the alpha.
1998-11-08 18:43:03 +00:00
{
Let psm(4) use si_drv1 to refer to its softc.
2010-09-09 07:52:15 +00:00
struct psm_softc *sc = dev->si_drv1;
Clean up and fix style(9) nits.
2008-04-08 19:09:45 +00:00
u_char buf[PSM_SMALLBUFSIZE];
int error = 0;
int s;
int l;
if ((sc->state & PSM_VALID) == 0)
return (EIO);
sys/dev: minor spelling fixes. Most affect comments, very few have user-visible effects.
2016-05-03 03:41:25 +00:00
/* block until mouse activity occurred */
Clean up and fix style(9) nits.
2008-04-08 19:09:45 +00:00
s = spltty();
while (sc->queue.count <= 0) {
Let psm(4) use si_drv1 to refer to its softc.
2010-09-09 07:52:15 +00:00
if (dev != sc->bdev) {
Clean up and fix style(9) nits.
2008-04-08 19:09:45 +00:00
splx(s);
return (EWOULDBLOCK);
}
sc->state |= PSM_ASLP;
error = tsleep(sc, PZERO | PCATCH, "psmrea", 0);
sc->state &= ~PSM_ASLP;
if (error) {
splx(s);
return (error);
} else if ((sc->state & PSM_VALID) == 0) {
/* the device disappeared! */
splx(s);
return (EIO);
}
}
splx(s);
/* copy data to the user land */
while ((sc->queue.count > 0) && (uio->uio_resid > 0)) {
s = spltty();
l = imin(sc->queue.count, uio->uio_resid);
if (l > sizeof(buf))
l = sizeof(buf);
if (l > sizeof(sc->queue.buf) - sc->queue.head) {
bcopy(&sc->queue.buf[sc->queue.head], &buf[0],
sizeof(sc->queue.buf) - sc->queue.head);
bcopy(&sc->queue.buf[0],
&buf[sizeof(sc->queue.buf) - sc->queue.head],
l - (sizeof(sc->queue.buf) - sc->queue.head));
} else
bcopy(&sc->queue.buf[sc->queue.head], &buf[0], l);
sc->queue.count -= l;
sc->queue.head = (sc->queue.head + l) % sizeof(sc->queue.buf);
splx(s);
error = uiomove(buf, l, uio);
if (error)
break;
Port the ps/2 mouse driver to the alpha.
1998-11-08 18:43:03 +00:00
}
Clean up and fix style(9) nits.
2008-04-08 19:09:45 +00:00
return (error);
Port the ps/2 mouse driver to the alpha.
1998-11-08 18:43:03 +00:00
}
static int
block_mouse_data(struct psm_softc *sc, int *c)
{
Clean up and fix style(9) nits.
2008-04-08 19:09:45 +00:00
int s;
Port the ps/2 mouse driver to the alpha.
1998-11-08 18:43:03 +00:00
Clean up and fix style(9) nits.
2008-04-08 19:09:45 +00:00
if (!kbdc_lock(sc->kbdc, TRUE))
return (EIO);
Port the ps/2 mouse driver to the alpha.
1998-11-08 18:43:03 +00:00
Clean up and fix style(9) nits.
2008-04-08 19:09:45 +00:00
s = spltty();
*c = get_controller_command_byte(sc->kbdc);
if ((*c == -1) || !set_controller_command_byte(sc->kbdc,
Port the ps/2 mouse driver to the alpha.
1998-11-08 18:43:03 +00:00
kbdc_get_device_mask(sc->kbdc),
Clean up and fix style(9) nits.
2008-04-08 19:09:45 +00:00
KBD_DISABLE_KBD_PORT | KBD_DISABLE_KBD_INT |
KBD_ENABLE_AUX_PORT | KBD_DISABLE_AUX_INT)) {
/* this is CONTROLLER ERROR */
splx(s);
kbdc_lock(sc->kbdc, FALSE);
return (EIO);
}
/*
* The device may be in the middle of status data transmission.
* The transmission will be interrupted, thus, incomplete status
* data must be discarded. Although the aux interrupt is disabled
* at the keyboard controller level, at most one aux interrupt
* may have already been pending and a data byte is in the
* output buffer; throw it away. Note that the second argument
* to `empty_aux_buffer()' is zero, so that the call will just
* flush the internal queue.
* `psmintr()' will be invoked after `splx()' if an interrupt is
* pending; it will see no data and returns immediately.
*/
empty_aux_buffer(sc->kbdc, 0); /* flush the queue */
read_aux_data_no_wait(sc->kbdc); /* throw away data if any */
flushpackets(sc);
Port the ps/2 mouse driver to the alpha.
1998-11-08 18:43:03 +00:00
splx(s);
Clean up and fix style(9) nits.
2008-04-08 19:09:45 +00:00
return (0);
Port the ps/2 mouse driver to the alpha.
1998-11-08 18:43:03 +00:00
}
Significantly reduce the "jitter" that is typical for PS/2 mice when using a KVM. There is no actual solution possible, but this gets us pretty close. Typically when switching back to a FreeBSD box and moving the mouse wild data is produced, because the protocol's validation/checksum system is extremely weak it is impossible to determine that we're out of sync before dropping several bogus packets to user land. The actual solution that appears to offer the best clamping of jitter is to buffer the mouse packets if we've not seen mouse activity for more than .5 seconds. Then waiting to flush that data for 1/20th of a second. If within that 20th of a second we get any packets that do fail the weak test we drop the entire queue and back off accepting data from the mouse for 2 seconds and then repeat the whole deal. You can still get _some_ jitter, notably if you switch to the FreeBSD box, then move the mouse just enough to generate one or two packets. Those packets may be bogus, but may still pass the validity check. One way to finally kill the problem once and for all is to check the initial packets for "wild" values. Typically one sees packets in the +/-60 range during normal operation, however when bogus data is generated it's typically near the outer range of +/-120 or more, those packets would be a good candidate for dropping or clamping. I've been running with this for several weeks now and it has significantly helped me stay sane even with a piece of junk Belkin KVM causing wild jitter each and every time I switch. Lastly I'd like to note that my experience with Windows shows me that somehow the Microsoft PS/2 driver typically avoids this problem, but that may only be possible when running the mouse in a dumb-ed down PS/2 mode that Belkin recommends on their site.
2003-12-11 11:28:11 +00:00
static void
dropqueue(struct psm_softc *sc)
{
Clean up and fix style(9) nits.
2008-04-08 19:09:45 +00:00
sc->queue.count = 0;
sc->queue.head = 0;
sc->queue.tail = 0;
Significantly reduce the "jitter" that is typical for PS/2 mice when using a KVM. There is no actual solution possible, but this gets us pretty close. Typically when switching back to a FreeBSD box and moving the mouse wild data is produced, because the protocol's validation/checksum system is extremely weak it is impossible to determine that we're out of sync before dropping several bogus packets to user land. The actual solution that appears to offer the best clamping of jitter is to buffer the mouse packets if we've not seen mouse activity for more than .5 seconds. Then waiting to flush that data for 1/20th of a second. If within that 20th of a second we get any packets that do fail the weak test we drop the entire queue and back off accepting data from the mouse for 2 seconds and then repeat the whole deal. You can still get _some_ jitter, notably if you switch to the FreeBSD box, then move the mouse just enough to generate one or two packets. Those packets may be bogus, but may still pass the validity check. One way to finally kill the problem once and for all is to check the initial packets for "wild" values. Typically one sees packets in the +/-60 range during normal operation, however when bogus data is generated it's typically near the outer range of +/-120 or more, those packets would be a good candidate for dropping or clamping. I've been running with this for several weeks now and it has significantly helped me stay sane even with a piece of junk Belkin KVM causing wild jitter each and every time I switch. Lastly I'd like to note that my experience with Windows shows me that somehow the Microsoft PS/2 driver typically avoids this problem, but that may only be possible when running the mouse in a dumb-ed down PS/2 mode that Belkin recommends on their site.
2003-12-11 11:28:11 +00:00
if ((sc->state & PSM_SOFTARMED) != 0) {
sc->state &= ~PSM_SOFTARMED;
Use callout(9) instead of timeout(9) to manage timers.
2012-09-07 19:42:36 +00:00
callout_stop(&sc->softcallout);
Significantly reduce the "jitter" that is typical for PS/2 mice when using a KVM. There is no actual solution possible, but this gets us pretty close. Typically when switching back to a FreeBSD box and moving the mouse wild data is produced, because the protocol's validation/checksum system is extremely weak it is impossible to determine that we're out of sync before dropping several bogus packets to user land. The actual solution that appears to offer the best clamping of jitter is to buffer the mouse packets if we've not seen mouse activity for more than .5 seconds. Then waiting to flush that data for 1/20th of a second. If within that 20th of a second we get any packets that do fail the weak test we drop the entire queue and back off accepting data from the mouse for 2 seconds and then repeat the whole deal. You can still get _some_ jitter, notably if you switch to the FreeBSD box, then move the mouse just enough to generate one or two packets. Those packets may be bogus, but may still pass the validity check. One way to finally kill the problem once and for all is to check the initial packets for "wild" values. Typically one sees packets in the +/-60 range during normal operation, however when bogus data is generated it's typically near the outer range of +/-120 or more, those packets would be a good candidate for dropping or clamping. I've been running with this for several weeks now and it has significantly helped me stay sane even with a piece of junk Belkin KVM causing wild jitter each and every time I switch. Lastly I'd like to note that my experience with Windows shows me that somehow the Microsoft PS/2 driver typically avoids this problem, but that may only be possible when running the mouse in a dumb-ed down PS/2 mode that Belkin recommends on their site.
2003-12-11 11:28:11 +00:00
}
sc->pqueue_start = sc->pqueue_end;
}
static void
flushpackets(struct psm_softc *sc)
{
dropqueue(sc);
bzero(&sc->pqueue, sizeof(sc->pqueue));
}
Port the ps/2 mouse driver to the alpha.
1998-11-08 18:43:03 +00:00
static int
unblock_mouse_data(struct psm_softc *sc, int c)
{
Clean up and fix style(9) nits.
2008-04-08 19:09:45 +00:00
int error = 0;
Port the ps/2 mouse driver to the alpha.
1998-11-08 18:43:03 +00:00
Clean up and fix style(9) nits.
2008-04-08 19:09:45 +00:00
/*
* We may have seen a part of status data during `set_mouse_XXX()'.
* they have been queued; flush it.
*/
empty_aux_buffer(sc->kbdc, 0);
Port the ps/2 mouse driver to the alpha.
1998-11-08 18:43:03 +00:00
Clean up and fix style(9) nits.
2008-04-08 19:09:45 +00:00
/* restore ports and interrupt */
if (!set_controller_command_byte(sc->kbdc,
kbdc_get_device_mask(sc->kbdc),
Port the ps/2 mouse driver to the alpha.
1998-11-08 18:43:03 +00:00
c & (KBD_KBD_CONTROL_BITS | KBD_AUX_CONTROL_BITS))) {
Clean up and fix style(9) nits.
2008-04-08 19:09:45 +00:00
/*
* CONTROLLER ERROR; this is serious, we may have
* been left with the inaccessible keyboard and
* the disabled mouse interrupt.
*/
error = EIO;
}
kbdc_lock(sc->kbdc, FALSE);
return (error);
Port the ps/2 mouse driver to the alpha.
1998-11-08 18:43:03 +00:00
}
- Add write(2) support for psm(4) in native operation level. Now arbitrary commands can be written to /dev/psm%d and status can be read back from it. - Reflect the change in psm(4) and bump version for ports. MFC after: 1 week
2008-04-08 17:55:26 +00:00
static int
psmwrite(struct cdev *dev, struct uio *uio, int flag)
{
Let psm(4) use si_drv1 to refer to its softc.
2010-09-09 07:52:15 +00:00
struct psm_softc *sc = dev->si_drv1;
Clean up and fix style(9) nits.
2008-04-08 19:09:45 +00:00
u_char buf[PSM_SMALLBUFSIZE];
int error = 0, i, l;
if ((sc->state & PSM_VALID) == 0)
return (EIO);
if (sc->mode.level < PSM_LEVEL_NATIVE)
return (ENODEV);
/* copy data from the user land */
while (uio->uio_resid > 0) {
l = imin(PSM_SMALLBUFSIZE, uio->uio_resid);
error = uiomove(buf, l, uio);
if (error)
break;
for (i = 0; i < l; i++) {
VLOG(4, (LOG_DEBUG, "psm: cmd 0x%x\n", buf[i]));
if (!write_aux_command(sc->kbdc, buf[i])) {
VLOG(2, (LOG_DEBUG,
"psm: cmd 0x%x failed.\n", buf[i]));
return (reinitialize(sc, FALSE));
}
}
}
return (error);
- Add write(2) support for psm(4) in native operation level. Now arbitrary commands can be written to /dev/psm%d and status can be read back from it. - Reflect the change in psm(4) and bump version for ports. MFC after: 1 week
2008-04-08 17:55:26 +00:00
}
Port the ps/2 mouse driver to the alpha.
1998-11-08 18:43:03 +00:00
static int
Clean up and fix style(9) nits.
2008-04-08 19:09:45 +00:00
psmioctl(struct cdev *dev, u_long cmd, caddr_t addr, int flag,
struct thread *td)
Port the ps/2 mouse driver to the alpha.
1998-11-08 18:43:03 +00:00
{
Let psm(4) use si_drv1 to refer to its softc.
2010-09-09 07:52:15 +00:00
struct psm_softc *sc = dev->si_drv1;
Clean up and fix style(9) nits.
2008-04-08 19:09:45 +00:00
mousemode_t mode;
mousestatus_t status;
Port the ps/2 mouse driver to the alpha.
1998-11-08 18:43:03 +00:00
#if (defined(MOUSE_GETVARS))
Clean up and fix style(9) nits.
2008-04-08 19:09:45 +00:00
mousevar_t *var;
Port the ps/2 mouse driver to the alpha.
1998-11-08 18:43:03 +00:00
#endif
Clean up and fix style(9) nits.
2008-04-08 19:09:45 +00:00
mousedata_t *data;
int stat[3];
int command_byte;
int error = 0;
int s;
/* Perform IOCTL command */
switch (cmd) {
case OLD_MOUSE_GETHWINFO:
s = spltty();
((old_mousehw_t *)addr)->buttons = sc->hw.buttons;
((old_mousehw_t *)addr)->iftype = sc->hw.iftype;
((old_mousehw_t *)addr)->type = sc->hw.type;
((old_mousehw_t *)addr)->hwid = sc->hw.hwid & 0x00ff;
splx(s);
break;
Port the ps/2 mouse driver to the alpha.
1998-11-08 18:43:03 +00:00
Clean up and fix style(9) nits.
2008-04-08 19:09:45 +00:00
case MOUSE_GETHWINFO:
s = spltty();
*(mousehw_t *)addr = sc->hw;
if (sc->mode.level == PSM_LEVEL_BASE)
((mousehw_t *)addr)->model = MOUSE_MODEL_GENERIC;
splx(s);
break;
Port the ps/2 mouse driver to the alpha.
1998-11-08 18:43:03 +00:00
Clean up and fix style(9) nits.
2008-04-08 19:09:45 +00:00
case MOUSE_SYN_GETHWINFO:
s = spltty();
- Do not clobber softc when psm(4) is reintialized. - Make INITAFTERSUSPEND flag independent of HOOKRESUME flag. - Automatically set INITAFTERSUSPEND flag when ALPS GlidePoint is detected. - Always probe Synaptics Touchpad. Allow MOUSE_SYN_GETHWINFO ioctl and automatically set INITAFTERSUSPEND flag when a supported device is detected, regardless of "hw.psm.synaptics_support" tunable setting. - Update psm(4) to reflect the above changes. - Remove long-time defunct SYNCHACK flag while I am in the neighborhood. MFC after: 1 month
2012-03-27 23:43:01 +00:00
if (sc->synhw.infoMajor >= 4)
Clean up and fix style(9) nits.
2008-04-08 19:09:45 +00:00
*(synapticshw_t *)addr = sc->synhw;
else
error = EINVAL;
splx(s);
break;
Port the ps/2 mouse driver to the alpha.
1998-11-08 18:43:03 +00:00
Clean up and fix style(9) nits.
2008-04-08 19:09:45 +00:00
case OLD_MOUSE_GETMODE:
s = spltty();
switch (sc->mode.level) {
case PSM_LEVEL_BASE:
((old_mousemode_t *)addr)->protocol = MOUSE_PROTO_PS2;
break;
case PSM_LEVEL_STANDARD:
((old_mousemode_t *)addr)->protocol =
MOUSE_PROTO_SYSMOUSE;
break;
case PSM_LEVEL_NATIVE:
((old_mousemode_t *)addr)->protocol = MOUSE_PROTO_PS2;
break;
}
((old_mousemode_t *)addr)->rate = sc->mode.rate;
((old_mousemode_t *)addr)->resolution = sc->mode.resolution;
((old_mousemode_t *)addr)->accelfactor = sc->mode.accelfactor;
splx(s);
break;
Port the ps/2 mouse driver to the alpha.
1998-11-08 18:43:03 +00:00
Clean up and fix style(9) nits.
2008-04-08 19:09:45 +00:00
case MOUSE_GETMODE:
s = spltty();
*(mousemode_t *)addr = sc->mode;
if ((sc->flags & PSM_NEED_SYNCBITS) != 0) {
((mousemode_t *)addr)->syncmask[0] = 0;
((mousemode_t *)addr)->syncmask[1] = 0;
}
((mousemode_t *)addr)->resolution =
MOUSE_RES_LOW - sc->mode.resolution;
switch (sc->mode.level) {
case PSM_LEVEL_BASE:
((mousemode_t *)addr)->protocol = MOUSE_PROTO_PS2;
((mousemode_t *)addr)->packetsize =
MOUSE_PS2_PACKETSIZE;
break;
case PSM_LEVEL_STANDARD:
((mousemode_t *)addr)->protocol = MOUSE_PROTO_SYSMOUSE;
((mousemode_t *)addr)->packetsize =
MOUSE_SYS_PACKETSIZE;
((mousemode_t *)addr)->syncmask[0] = MOUSE_SYS_SYNCMASK;
((mousemode_t *)addr)->syncmask[1] = MOUSE_SYS_SYNC;
break;
case PSM_LEVEL_NATIVE:
/* FIXME: this isn't quite correct... XXX */
((mousemode_t *)addr)->protocol = MOUSE_PROTO_PS2;
break;
}
splx(s);
break;
Add support for the Synaptics Touchpad mouse driver. I reworked the submitted version with style cleanups and changes to comments. I also modified the ioctl interface. This version only has one ioctl (to get the Synaptics-specific config parameters) since this is the only information a user might want. Submitted by: Arne Schwabe <arne -at- rfc2549.org>
2004-07-30 00:59:40 +00:00
Clean up and fix style(9) nits.
2008-04-08 19:09:45 +00:00
case OLD_MOUSE_SETMODE:
case MOUSE_SETMODE:
if (cmd == OLD_MOUSE_SETMODE) {
mode.rate = ((old_mousemode_t *)addr)->rate;
/*
* resolution old I/F new I/F
* default 0 0
* low 1 -2
* medium low 2 -3
* medium high 3 -4
* high 4 -5
*/
if (((old_mousemode_t *)addr)->resolution > 0)
mode.resolution =
-((old_mousemode_t *)addr)->resolution - 1;
else
mode.resolution = 0;
mode.accelfactor =
((old_mousemode_t *)addr)->accelfactor;
mode.level = -1;
} else
mode = *(mousemode_t *)addr;
/* adjust and validate parameters. */
if (mode.rate > UCHAR_MAX)
return (EINVAL);
if (mode.rate == 0)
mode.rate = sc->dflt_mode.rate;
else if (mode.rate == -1)
/* don't change the current setting */
;
else if (mode.rate < 0)
return (EINVAL);
if (mode.resolution >= UCHAR_MAX)
return (EINVAL);
if (mode.resolution >= 200)
mode.resolution = MOUSE_RES_HIGH;
else if (mode.resolution >= 100)
mode.resolution = MOUSE_RES_MEDIUMHIGH;
else if (mode.resolution >= 50)
mode.resolution = MOUSE_RES_MEDIUMLOW;
else if (mode.resolution > 0)
mode.resolution = MOUSE_RES_LOW;
if (mode.resolution == MOUSE_RES_DEFAULT)
mode.resolution = sc->dflt_mode.resolution;
else if (mode.resolution == -1)
/* don't change the current setting */
;
else if (mode.resolution < 0) /* MOUSE_RES_LOW/MEDIUM/HIGH */
mode.resolution = MOUSE_RES_LOW - mode.resolution;
if (mode.level == -1)
/* don't change the current setting */
mode.level = sc->mode.level;
else if ((mode.level < PSM_LEVEL_MIN) ||
(mode.level > PSM_LEVEL_MAX))
return (EINVAL);
if (mode.accelfactor == -1)
/* don't change the current setting */
mode.accelfactor = sc->mode.accelfactor;
else if (mode.accelfactor < 0)
return (EINVAL);
/* don't allow anybody to poll the keyboard controller */
error = block_mouse_data(sc, &command_byte);
if (error)
return (error);
/* set mouse parameters */
if (mode.rate > 0)
mode.rate = set_mouse_sampling_rate(sc->kbdc,
mode.rate);
if (mode.resolution >= 0)
mode.resolution =
set_mouse_resolution(sc->kbdc, mode.resolution);
set_mouse_scaling(sc->kbdc, 1);
get_mouse_status(sc->kbdc, stat, 0, 3);
s = spltty();
sc->mode.rate = mode.rate;
sc->mode.resolution = mode.resolution;
sc->mode.accelfactor = mode.accelfactor;
sc->mode.level = mode.level;
splx(s);
unblock_mouse_data(sc, command_byte);
break;
Port the ps/2 mouse driver to the alpha.
1998-11-08 18:43:03 +00:00
Clean up and fix style(9) nits.
2008-04-08 19:09:45 +00:00
case MOUSE_GETLEVEL:
*(int *)addr = sc->mode.level;
break;
case MOUSE_SETLEVEL:
if ((*(int *)addr < PSM_LEVEL_MIN) ||
(*(int *)addr > PSM_LEVEL_MAX))
return (EINVAL);
sc->mode.level = *(int *)addr;
synaptics: more support for semi-MT trackpads. Several improvements to the Synaptics driver to support semi-multitouch trackpads and some other fixes: - Two finger scrolling support for "semi-MT" touchpads. Those include many of the older Synaptics touchpads before "true" multitouch support (indicated by capMultiFinger). Semi-MT touchpads can report a second finger position, but the X or Y coordinate may be swapped with some coordinate of the first finger. This is a result of how the hardware works internally. Therefore, all that can be reliably extracted is the bounding box of the two finger positions. Semi-MT touchpads can be recognized by the capAdvancedGestures capability bit. After setting the mode byte, advanced gestures mode has to be enabled. Then, data packets compatible with the capMultiFinger format are sent, so the same two finger scrolling code can be leveraged. Enabling advanced gestures mode on true multitouch touchpads should be harmless. Linux seems to always enable advanced gestures mode. - Put mode setting logic into own functions synaptics_preferred_mode() and synaptics_set_mode() to have this in one place. synaptics_passthrough_on() and synaptics_passthrough_off() currently always use 0xc1 as the mode byte, which may be wrong for touchpads that don't have capExtended. - Expose X and Y resolution of touchpad to userland. Also expose minimum and maximum X and Y coordinates. This is useful for programs in userspace that read raw PSM packets (with PSM_LEVEL_NATIVE enabled) and need to interpret the coordinates. - Also send "extended w mode" packets (see section 3.2.9 of 511-000275-01_RevB.pdf) to userspace if PSM_LEVEL_NATIVE is enabled. This is useful for userspace programs/drivers such as xf86-input-synaptics that can handle these packets. - Fix parsing of nExtendedQueries, and request extended/continued capability bits depending on this value. - capReportsMax, capClearPad, capAdvancedGestures and capCoveredPad must be extracted from status[0] and not status[2], I think. Submitted by: Jan Kokemüller jan.kokemueller at gmail.com
2015-05-10 20:36:57 +00:00
if (sc->hw.model == MOUSE_MODEL_SYNAPTICS) {
/*
* If we are entering PSM_LEVEL_NATIVE, we want to
* enable sending of "extended W mode" packets to
* userland. Reset the mode of the touchpad so that the
* change in the level is picked up.
*/
error = block_mouse_data(sc, &command_byte);
if (error)
return (error);
synaptics_set_mode(sc, synaptics_preferred_mode(sc));
unblock_mouse_data(sc, command_byte);
}
Clean up and fix style(9) nits.
2008-04-08 19:09:45 +00:00
break;
case MOUSE_GETSTATUS:
s = spltty();
status = sc->status;
sc->status.flags = 0;
sc->status.obutton = sc->status.button;
sc->status.button = 0;
sc->status.dx = 0;
sc->status.dy = 0;
sc->status.dz = 0;
splx(s);
*(mousestatus_t *)addr = status;
break;
Port the ps/2 mouse driver to the alpha.
1998-11-08 18:43:03 +00:00
#if (defined(MOUSE_GETVARS))
Clean up and fix style(9) nits.
2008-04-08 19:09:45 +00:00
case MOUSE_GETVARS:
var = (mousevar_t *)addr;
bzero(var, sizeof(*var));
s = spltty();
var->var[0] = MOUSE_VARS_PS2_SIG;
var->var[1] = sc->config;
var->var[2] = sc->flags;
splx(s);
break;
Port the ps/2 mouse driver to the alpha.
1998-11-08 18:43:03 +00:00
Clean up and fix style(9) nits.
2008-04-08 19:09:45 +00:00
case MOUSE_SETVARS:
return (ENODEV);
Port the ps/2 mouse driver to the alpha.
1998-11-08 18:43:03 +00:00
#endif /* MOUSE_GETVARS */
Clean up and fix style(9) nits.
2008-04-08 19:09:45 +00:00
case MOUSE_READSTATE:
case MOUSE_READDATA:
data = (mousedata_t *)addr;
if (data->len > sizeof(data->buf)/sizeof(data->buf[0]))
return (EINVAL);
error = block_mouse_data(sc, &command_byte);
if (error)
return (error);
if ((data->len = get_mouse_status(sc->kbdc, data->buf,
(cmd == MOUSE_READDATA) ? 1 : 0, data->len)) <= 0)
error = EIO;
unblock_mouse_data(sc, command_byte);
break;
Port the ps/2 mouse driver to the alpha.
1998-11-08 18:43:03 +00:00
#if (defined(MOUSE_SETRESOLUTION))
Clean up and fix style(9) nits.
2008-04-08 19:09:45 +00:00
case MOUSE_SETRESOLUTION:
mode.resolution = *(int *)addr;
if (mode.resolution >= UCHAR_MAX)
return (EINVAL);
else if (mode.resolution >= 200)
mode.resolution = MOUSE_RES_HIGH;
else if (mode.resolution >= 100)
mode.resolution = MOUSE_RES_MEDIUMHIGH;
else if (mode.resolution >= 50)
mode.resolution = MOUSE_RES_MEDIUMLOW;
else if (mode.resolution > 0)
mode.resolution = MOUSE_RES_LOW;
if (mode.resolution == MOUSE_RES_DEFAULT)
mode.resolution = sc->dflt_mode.resolution;
else if (mode.resolution == -1)
mode.resolution = sc->mode.resolution;
else if (mode.resolution < 0) /* MOUSE_RES_LOW/MEDIUM/HIGH */
mode.resolution = MOUSE_RES_LOW - mode.resolution;
error = block_mouse_data(sc, &command_byte);
if (error)
return (error);
sc->mode.resolution =
set_mouse_resolution(sc->kbdc, mode.resolution);
if (sc->mode.resolution != mode.resolution)
error = EIO;
unblock_mouse_data(sc, command_byte);
break;
Port the ps/2 mouse driver to the alpha.
1998-11-08 18:43:03 +00:00
#endif /* MOUSE_SETRESOLUTION */
#if (defined(MOUSE_SETRATE))
Clean up and fix style(9) nits.
2008-04-08 19:09:45 +00:00
case MOUSE_SETRATE:
mode.rate = *(int *)addr;
if (mode.rate > UCHAR_MAX)
return (EINVAL);
if (mode.rate == 0)
mode.rate = sc->dflt_mode.rate;
else if (mode.rate < 0)
mode.rate = sc->mode.rate;
error = block_mouse_data(sc, &command_byte);
if (error)
return (error);
sc->mode.rate = set_mouse_sampling_rate(sc->kbdc, mode.rate);
if (sc->mode.rate != mode.rate)
error = EIO;
unblock_mouse_data(sc, command_byte);
break;
Port the ps/2 mouse driver to the alpha.
1998-11-08 18:43:03 +00:00
#endif /* MOUSE_SETRATE */
#if (defined(MOUSE_SETSCALING))
Clean up and fix style(9) nits.
2008-04-08 19:09:45 +00:00
case MOUSE_SETSCALING:
if ((*(int *)addr <= 0) || (*(int *)addr > 2))
return (EINVAL);
error = block_mouse_data(sc, &command_byte);
if (error)
return (error);
if (!set_mouse_scaling(sc->kbdc, *(int *)addr))
error = EIO;
unblock_mouse_data(sc, command_byte);
break;
Port the ps/2 mouse driver to the alpha.
1998-11-08 18:43:03 +00:00
#endif /* MOUSE_SETSCALING */
#if (defined(MOUSE_GETHWID))
Clean up and fix style(9) nits.
2008-04-08 19:09:45 +00:00
case MOUSE_GETHWID:
error = block_mouse_data(sc, &command_byte);
if (error)
return (error);
sc->hw.hwid &= ~0x00ff;
sc->hw.hwid |= get_aux_id(sc->kbdc);
*(int *)addr = sc->hw.hwid & 0x00ff;
unblock_mouse_data(sc, command_byte);
break;
Port the ps/2 mouse driver to the alpha.
1998-11-08 18:43:03 +00:00
#endif /* MOUSE_GETHWID */
Teach psm about O_ASYNC This makes Xorg happy if you aren't using moused. MFC after: 3 days
2009-03-16 08:21:51 +00:00
case FIONBIO:
case FIOASYNC:
break;
case FIOSETOWN:
error = fsetown(*(int *)addr, &sc->async);
break;
case FIOGETOWN:
*(int *) addr = fgetown(&sc->async);
break;
Clean up and fix style(9) nits.
2008-04-08 19:09:45 +00:00
default:
return (ENOTTY);
}
Port the ps/2 mouse driver to the alpha.
1998-11-08 18:43:03 +00:00
Clean up and fix style(9) nits.
2008-04-08 19:09:45 +00:00
return (error);
Port the ps/2 mouse driver to the alpha.
1998-11-08 18:43:03 +00:00
}
- Add Support for the following PS/2 mice: - Microsoft IntelliMouse Explorer: 2 buttons on top, 2 side buttons and a wheel which also acts as the middle button. The mouse is recognized as "IntelliMouse Explorer". - Genius NetScroll Optical: 2 buttons on top, 2 side buttons and a wheel which also acts as the middle button. The mouse is recognized as "NetMouse/NetScroll Optical". - MouseSystems SmartScroll Mouse (OEM from Genius?): 3 buttons on top, 1 side button and a wheel. The mouse is recognized as Genius "NetScroll". - IBM ScrollPoint: 2 buttons on top and a stick between the buttons. The stick can perform "horizontal scroll" in W*ndows environment. The horizontal movement of the stick is detected. It is currently mapped to the Z axis movement in the same way as the first wheel. The mouse is recognized as "MouseMan+", as it is considered to be a variation of MouseMan. - A4 Tech 4D and 4D+ mice. These mice have two wheels! The movement of the second wheel is reported as the Z axis movement in the same way as the first wheel. These mice are recognized as "4D Mouse" and "4D+ Mouse". - Tweak IntelliMouse support code a bit so that less-than-compatible wheel mice can work properly with the psm driver. - Add driver configuration flags which correspond to the kernel options PSM_HOOKRESUME and PSM_RESETAFTERSUSPEND, so that we don't need to recompile the kernel when we need these functions. - Properly keep track of the irq resource. - Add a watchdog timer in case interrupts are lost (experimental). - Add `detach' function (experimental).
2000-03-18 15:21:40 +00:00
static void
psmtimeout(void *arg)
{
Clean up and fix style(9) nits.
2008-04-08 19:09:45 +00:00
struct psm_softc *sc;
int s;
sc = (struct psm_softc *)arg;
s = spltty();
if (sc->watchdog && kbdc_lock(sc->kbdc, TRUE)) {
VLOG(4, (LOG_DEBUG, "psm%d: lost interrupt?\n", sc->unit));
psmintr(sc);
kbdc_lock(sc->kbdc, FALSE);
}
sc->watchdog = TRUE;
splx(s);
Use callout(9) instead of timeout(9) to manage timers.
2012-09-07 19:42:36 +00:00
callout_reset(&sc->callout, hz, psmtimeout, sc);
- Add Support for the following PS/2 mice: - Microsoft IntelliMouse Explorer: 2 buttons on top, 2 side buttons and a wheel which also acts as the middle button. The mouse is recognized as "IntelliMouse Explorer". - Genius NetScroll Optical: 2 buttons on top, 2 side buttons and a wheel which also acts as the middle button. The mouse is recognized as "NetMouse/NetScroll Optical". - MouseSystems SmartScroll Mouse (OEM from Genius?): 3 buttons on top, 1 side button and a wheel. The mouse is recognized as Genius "NetScroll". - IBM ScrollPoint: 2 buttons on top and a stick between the buttons. The stick can perform "horizontal scroll" in W*ndows environment. The horizontal movement of the stick is detected. It is currently mapped to the Z axis movement in the same way as the first wheel. The mouse is recognized as "MouseMan+", as it is considered to be a variation of MouseMan. - A4 Tech 4D and 4D+ mice. These mice have two wheels! The movement of the second wheel is reported as the Z axis movement in the same way as the first wheel. These mice are recognized as "4D Mouse" and "4D+ Mouse". - Tweak IntelliMouse support code a bit so that less-than-compatible wheel mice can work properly with the psm driver. - Add driver configuration flags which correspond to the kernel options PSM_HOOKRESUME and PSM_RESETAFTERSUSPEND, so that we don't need to recompile the kernel when we need these functions. - Properly keep track of the irq resource. - Add a watchdog timer in case interrupts are lost (experimental). - Add `detach' function (experimental).
2000-03-18 15:21:40 +00:00
}
Reduce diffs to work in progress before checking in serious changes. o Move the sysctls under debug.psm.* and hw.psm.* making them a bit clearer and more consistent with other drivers. o Remove the debug.psm_soft_timeout sysctl. It was introduced many moons ago in r1.64 but never referenced anywhere. o Introduce hw.psm.tap_threshold and hw.psm.tap_timeout to control the behaviour of taps on touchpads. People might like to fiddle with these if tapping seems to slow or too fast for them. o Add debug.psm.loglevel as a tunable so that verbosity can be set easily at boot-time (to watch probes and such) without having to compile a kernel with options PSM_DEBUG=N.
2005-01-03 13:19:49 +00:00
/* Add all sysctls under the debug.psm and hw.psm nodes */
Mark all SYSCTL_NODEs static that have no corresponding SYSCTL_DECLs. The SYSCTL_NODE macro defines a list that stores all child-elements of that node. If there's no SYSCTL_DECL macro anywhere else, there's no reason why it shouldn't be static.
2011-11-07 15:43:11 +00:00
static SYSCTL_NODE(_debug, OID_AUTO, psm, CTLFLAG_RD, 0, "ps/2 mouse");
static SYSCTL_NODE(_hw, OID_AUTO, psm, CTLFLAG_RD, 0, "ps/2 mouse");
Significantly reduce the "jitter" that is typical for PS/2 mice when using a KVM. There is no actual solution possible, but this gets us pretty close. Typically when switching back to a FreeBSD box and moving the mouse wild data is produced, because the protocol's validation/checksum system is extremely weak it is impossible to determine that we're out of sync before dropping several bogus packets to user land. The actual solution that appears to offer the best clamping of jitter is to buffer the mouse packets if we've not seen mouse activity for more than .5 seconds. Then waiting to flush that data for 1/20th of a second. If within that 20th of a second we get any packets that do fail the weak test we drop the entire queue and back off accepting data from the mouse for 2 seconds and then repeat the whole deal. You can still get _some_ jitter, notably if you switch to the FreeBSD box, then move the mouse just enough to generate one or two packets. Those packets may be bogus, but may still pass the validity check. One way to finally kill the problem once and for all is to check the initial packets for "wild" values. Typically one sees packets in the +/-60 range during normal operation, however when bogus data is generated it's typically near the outer range of +/-120 or more, those packets would be a good candidate for dropping or clamping. I've been running with this for several weeks now and it has significantly helped me stay sane even with a piece of junk Belkin KVM causing wild jitter each and every time I switch. Lastly I'd like to note that my experience with Windows shows me that somehow the Microsoft PS/2 driver typically avoids this problem, but that may only be possible when running the mouse in a dumb-ed down PS/2 mode that Belkin recommends on their site.
2003-12-11 11:28:11 +00:00
Fill in sysctl descriptions. Approved by: philip
2008-07-26 00:01:19 +00:00
SYSCTL_INT(_debug_psm, OID_AUTO, loglevel, CTLFLAG_RW, &verbose, 0,
"Verbosity level");
Significantly reduce the "jitter" that is typical for PS/2 mice when using a KVM. There is no actual solution possible, but this gets us pretty close. Typically when switching back to a FreeBSD box and moving the mouse wild data is produced, because the protocol's validation/checksum system is extremely weak it is impossible to determine that we're out of sync before dropping several bogus packets to user land. The actual solution that appears to offer the best clamping of jitter is to buffer the mouse packets if we've not seen mouse activity for more than .5 seconds. Then waiting to flush that data for 1/20th of a second. If within that 20th of a second we get any packets that do fail the weak test we drop the entire queue and back off accepting data from the mouse for 2 seconds and then repeat the whole deal. You can still get _some_ jitter, notably if you switch to the FreeBSD box, then move the mouse just enough to generate one or two packets. Those packets may be bogus, but may still pass the validity check. One way to finally kill the problem once and for all is to check the initial packets for "wild" values. Typically one sees packets in the +/-60 range during normal operation, however when bogus data is generated it's typically near the outer range of +/-120 or more, those packets would be a good candidate for dropping or clamping. I've been running with this for several weeks now and it has significantly helped me stay sane even with a piece of junk Belkin KVM causing wild jitter each and every time I switch. Lastly I'd like to note that my experience with Windows shows me that somehow the Microsoft PS/2 driver typically avoids this problem, but that may only be possible when running the mouse in a dumb-ed down PS/2 mode that Belkin recommends on their site.
2003-12-11 11:28:11 +00:00
Reduce diffs to work in progress before checking in serious changes. o Move the sysctls under debug.psm.* and hw.psm.* making them a bit clearer and more consistent with other drivers. o Remove the debug.psm_soft_timeout sysctl. It was introduced many moons ago in r1.64 but never referenced anywhere. o Introduce hw.psm.tap_threshold and hw.psm.tap_timeout to control the behaviour of taps on touchpads. People might like to fiddle with these if tapping seems to slow or too fast for them. o Add debug.psm.loglevel as a tunable so that verbosity can be set easily at boot-time (to watch probes and such) without having to compile a kernel with options PSM_DEBUG=N.
2005-01-03 13:19:49 +00:00
static int psmhz = 20;
Fill in sysctl descriptions. Approved by: philip
2008-07-26 00:01:19 +00:00
SYSCTL_INT(_debug_psm, OID_AUTO, hz, CTLFLAG_RW, &psmhz, 0,
"Frequency of the softcallout (in hz)");
Significantly reduce the "jitter" that is typical for PS/2 mice when using a KVM. There is no actual solution possible, but this gets us pretty close. Typically when switching back to a FreeBSD box and moving the mouse wild data is produced, because the protocol's validation/checksum system is extremely weak it is impossible to determine that we're out of sync before dropping several bogus packets to user land. The actual solution that appears to offer the best clamping of jitter is to buffer the mouse packets if we've not seen mouse activity for more than .5 seconds. Then waiting to flush that data for 1/20th of a second. If within that 20th of a second we get any packets that do fail the weak test we drop the entire queue and back off accepting data from the mouse for 2 seconds and then repeat the whole deal. You can still get _some_ jitter, notably if you switch to the FreeBSD box, then move the mouse just enough to generate one or two packets. Those packets may be bogus, but may still pass the validity check. One way to finally kill the problem once and for all is to check the initial packets for "wild" values. Typically one sees packets in the +/-60 range during normal operation, however when bogus data is generated it's typically near the outer range of +/-120 or more, those packets would be a good candidate for dropping or clamping. I've been running with this for several weeks now and it has significantly helped me stay sane even with a piece of junk Belkin KVM causing wild jitter each and every time I switch. Lastly I'd like to note that my experience with Windows shows me that somehow the Microsoft PS/2 driver typically avoids this problem, but that may only be possible when running the mouse in a dumb-ed down PS/2 mode that Belkin recommends on their site.
2003-12-11 11:28:11 +00:00
static int psmerrsecs = 2;
Fill in sysctl descriptions. Approved by: philip
2008-07-26 00:01:19 +00:00
SYSCTL_INT(_debug_psm, OID_AUTO, errsecs, CTLFLAG_RW, &psmerrsecs, 0,
"Number of seconds during which packets will dropped after a sync error");
Significantly reduce the "jitter" that is typical for PS/2 mice when using a KVM. There is no actual solution possible, but this gets us pretty close. Typically when switching back to a FreeBSD box and moving the mouse wild data is produced, because the protocol's validation/checksum system is extremely weak it is impossible to determine that we're out of sync before dropping several bogus packets to user land. The actual solution that appears to offer the best clamping of jitter is to buffer the mouse packets if we've not seen mouse activity for more than .5 seconds. Then waiting to flush that data for 1/20th of a second. If within that 20th of a second we get any packets that do fail the weak test we drop the entire queue and back off accepting data from the mouse for 2 seconds and then repeat the whole deal. You can still get _some_ jitter, notably if you switch to the FreeBSD box, then move the mouse just enough to generate one or two packets. Those packets may be bogus, but may still pass the validity check. One way to finally kill the problem once and for all is to check the initial packets for "wild" values. Typically one sees packets in the +/-60 range during normal operation, however when bogus data is generated it's typically near the outer range of +/-120 or more, those packets would be a good candidate for dropping or clamping. I've been running with this for several weeks now and it has significantly helped me stay sane even with a piece of junk Belkin KVM causing wild jitter each and every time I switch. Lastly I'd like to note that my experience with Windows shows me that somehow the Microsoft PS/2 driver typically avoids this problem, but that may only be possible when running the mouse in a dumb-ed down PS/2 mode that Belkin recommends on their site.
2003-12-11 11:28:11 +00:00
static int psmerrusecs = 0;
Fill in sysctl descriptions. Approved by: philip
2008-07-26 00:01:19 +00:00
SYSCTL_INT(_debug_psm, OID_AUTO, errusecs, CTLFLAG_RW, &psmerrusecs, 0,
"Microseconds to add to psmerrsecs");
Significantly reduce the "jitter" that is typical for PS/2 mice when using a KVM. There is no actual solution possible, but this gets us pretty close. Typically when switching back to a FreeBSD box and moving the mouse wild data is produced, because the protocol's validation/checksum system is extremely weak it is impossible to determine that we're out of sync before dropping several bogus packets to user land. The actual solution that appears to offer the best clamping of jitter is to buffer the mouse packets if we've not seen mouse activity for more than .5 seconds. Then waiting to flush that data for 1/20th of a second. If within that 20th of a second we get any packets that do fail the weak test we drop the entire queue and back off accepting data from the mouse for 2 seconds and then repeat the whole deal. You can still get _some_ jitter, notably if you switch to the FreeBSD box, then move the mouse just enough to generate one or two packets. Those packets may be bogus, but may still pass the validity check. One way to finally kill the problem once and for all is to check the initial packets for "wild" values. Typically one sees packets in the +/-60 range during normal operation, however when bogus data is generated it's typically near the outer range of +/-120 or more, those packets would be a good candidate for dropping or clamping. I've been running with this for several weeks now and it has significantly helped me stay sane even with a piece of junk Belkin KVM causing wild jitter each and every time I switch. Lastly I'd like to note that my experience with Windows shows me that somehow the Microsoft PS/2 driver typically avoids this problem, but that may only be possible when running the mouse in a dumb-ed down PS/2 mode that Belkin recommends on their site.
2003-12-11 11:28:11 +00:00
static int psmsecs = 0;
Fill in sysctl descriptions. Approved by: philip
2008-07-26 00:01:19 +00:00
SYSCTL_INT(_debug_psm, OID_AUTO, secs, CTLFLAG_RW, &psmsecs, 0,
"Max number of seconds between soft interrupts");
Significantly reduce the "jitter" that is typical for PS/2 mice when using a KVM. There is no actual solution possible, but this gets us pretty close. Typically when switching back to a FreeBSD box and moving the mouse wild data is produced, because the protocol's validation/checksum system is extremely weak it is impossible to determine that we're out of sync before dropping several bogus packets to user land. The actual solution that appears to offer the best clamping of jitter is to buffer the mouse packets if we've not seen mouse activity for more than .5 seconds. Then waiting to flush that data for 1/20th of a second. If within that 20th of a second we get any packets that do fail the weak test we drop the entire queue and back off accepting data from the mouse for 2 seconds and then repeat the whole deal. You can still get _some_ jitter, notably if you switch to the FreeBSD box, then move the mouse just enough to generate one or two packets. Those packets may be bogus, but may still pass the validity check. One way to finally kill the problem once and for all is to check the initial packets for "wild" values. Typically one sees packets in the +/-60 range during normal operation, however when bogus data is generated it's typically near the outer range of +/-120 or more, those packets would be a good candidate for dropping or clamping. I've been running with this for several weeks now and it has significantly helped me stay sane even with a piece of junk Belkin KVM causing wild jitter each and every time I switch. Lastly I'd like to note that my experience with Windows shows me that somehow the Microsoft PS/2 driver typically avoids this problem, but that may only be possible when running the mouse in a dumb-ed down PS/2 mode that Belkin recommends on their site.
2003-12-11 11:28:11 +00:00
static int psmusecs = 500000;
Fill in sysctl descriptions. Approved by: philip
2008-07-26 00:01:19 +00:00
SYSCTL_INT(_debug_psm, OID_AUTO, usecs, CTLFLAG_RW, &psmusecs, 0,
"Microseconds to add to psmsecs");
Reduce diffs to work in progress before checking in serious changes. o Move the sysctls under debug.psm.* and hw.psm.* making them a bit clearer and more consistent with other drivers. o Remove the debug.psm_soft_timeout sysctl. It was introduced many moons ago in r1.64 but never referenced anywhere. o Introduce hw.psm.tap_threshold and hw.psm.tap_timeout to control the behaviour of taps on touchpads. People might like to fiddle with these if tapping seems to slow or too fast for them. o Add debug.psm.loglevel as a tunable so that verbosity can be set easily at boot-time (to watch probes and such) without having to compile a kernel with options PSM_DEBUG=N.
2005-01-03 13:19:49 +00:00
static int pkterrthresh = 2;
Fill in sysctl descriptions. Approved by: philip
2008-07-26 00:01:19 +00:00
SYSCTL_INT(_debug_psm, OID_AUTO, pkterrthresh, CTLFLAG_RW, &pkterrthresh, 0,
"Number of error packets allowed before reinitializing the mouse");
Improve sync recovery algorithm: o Remove PSM_SYNCERR_THRESHOLD1. This value specified how many sync errors were required before the mouse is re-initialised. Re-initialisation is now done after (packetsize * 2) sync errors as things aren't likely to improve after that. o Reset lastinputerror when re-initialisation occurs. We don't want to continue to drop data after re-initialisation. o Count the number of failed packets independently of the syncerrors statistic. syncerrors is useful for recovering sync within a single packet. pkterrors allows us to detect when the mouse changes its packet mode due to some external event (e.g. KVM switch). o Reinitialize the mouse if we see more than psmpkterrthresh errors during the validation period. The validation period begins as soon as a sync error is detected and continues until psmerrsecs/msecs time has elapsed. The defaults for these two values force a reset if we see two packet errors in a 2 second period. This allows rapid detection of packet framing errors caused by the mouse changing packet modes. o Export psmpkterrthresh as a sysctl o Export psmloglevel as a sysctl. o Enable more debugging code to be enabled at runtime via psmloglevel. o Simplify verbose conditioned loging by using a VLOG macro. o Add several comments describing the sync recovery algorithm of this driver. Large Portions by: Brian Somers <brian@Awfulhak.org> Inspired and Frustrated by: Belkin KVMs Reviewed by: njl, philip
2004-08-27 21:25:16 +00:00
Add new "hw.psm.tap_enabled" tunable and sysctl. This tunable allows one to enable (1) or disable (0) gestures like tap and tap-hold on Synaptics TouchPad when the Extended mode isn't enabled (ie. "hw.psm.synaptics_support" not set). By default, the value is -1 in order to keep the current behaviour of not enabling/disabling gestures explicitly. PR: kern/139272 Submitted by: David Horn <dhorn2000 AT gmail DOT com> Reviewed by: David Horn <dhorn2000 AT gmail DOT com>
2009-12-18 17:46:57 +00:00
SYSCTL_INT(_hw_psm, OID_AUTO, tap_enabled, CTLFLAG_RW, &tap_enabled, 0,
"Enable tap and drag gestures");
Reduce diffs to work in progress before checking in serious changes. o Move the sysctls under debug.psm.* and hw.psm.* making them a bit clearer and more consistent with other drivers. o Remove the debug.psm_soft_timeout sysctl. It was introduced many moons ago in r1.64 but never referenced anywhere. o Introduce hw.psm.tap_threshold and hw.psm.tap_timeout to control the behaviour of taps on touchpads. People might like to fiddle with these if tapping seems to slow or too fast for them. o Add debug.psm.loglevel as a tunable so that verbosity can be set easily at boot-time (to watch probes and such) without having to compile a kernel with options PSM_DEBUG=N.
2005-01-03 13:19:49 +00:00
static int tap_threshold = PSM_TAP_THRESHOLD;
Fill in sysctl descriptions. Approved by: philip
2008-07-26 00:01:19 +00:00
SYSCTL_INT(_hw_psm, OID_AUTO, tap_threshold, CTLFLAG_RW, &tap_threshold, 0,
"Button tap threshold");
Reduce diffs to work in progress before checking in serious changes. o Move the sysctls under debug.psm.* and hw.psm.* making them a bit clearer and more consistent with other drivers. o Remove the debug.psm_soft_timeout sysctl. It was introduced many moons ago in r1.64 but never referenced anywhere. o Introduce hw.psm.tap_threshold and hw.psm.tap_timeout to control the behaviour of taps on touchpads. People might like to fiddle with these if tapping seems to slow or too fast for them. o Add debug.psm.loglevel as a tunable so that verbosity can be set easily at boot-time (to watch probes and such) without having to compile a kernel with options PSM_DEBUG=N.
2005-01-03 13:19:49 +00:00
static int tap_timeout = PSM_TAP_TIMEOUT;
Fill in sysctl descriptions. Approved by: philip
2008-07-26 00:01:19 +00:00
SYSCTL_INT(_hw_psm, OID_AUTO, tap_timeout, CTLFLAG_RW, &tap_timeout, 0,
"Tap timeout for touchpads");
Improve sync recovery algorithm: o Remove PSM_SYNCERR_THRESHOLD1. This value specified how many sync errors were required before the mouse is re-initialised. Re-initialisation is now done after (packetsize * 2) sync errors as things aren't likely to improve after that. o Reset lastinputerror when re-initialisation occurs. We don't want to continue to drop data after re-initialisation. o Count the number of failed packets independently of the syncerrors statistic. syncerrors is useful for recovering sync within a single packet. pkterrors allows us to detect when the mouse changes its packet mode due to some external event (e.g. KVM switch). o Reinitialize the mouse if we see more than psmpkterrthresh errors during the validation period. The validation period begins as soon as a sync error is detected and continues until psmerrsecs/msecs time has elapsed. The defaults for these two values force a reset if we see two packet errors in a 2 second period. This allows rapid detection of packet framing errors caused by the mouse changing packet modes. o Export psmpkterrthresh as a sysctl o Export psmloglevel as a sysctl. o Enable more debugging code to be enabled at runtime via psmloglevel. o Simplify verbose conditioned loging by using a VLOG macro. o Add several comments describing the sync recovery algorithm of this driver. Large Portions by: Brian Somers <brian@Awfulhak.org> Inspired and Frustrated by: Belkin KVMs Reviewed by: njl, philip
2004-08-27 21:25:16 +00:00
Port the ps/2 mouse driver to the alpha.
1998-11-08 18:43:03 +00:00
static void
psmintr(void *arg)
{
Clean up and fix style(9) nits.
2008-04-08 19:09:45 +00:00
struct psm_softc *sc = arg;
struct timeval now;
int c;
packetbuf_t *pb;
/* read until there is nothing to read */
while((c = read_aux_data_no_wait(sc->kbdc)) != -1) {
pb = &sc->pqueue[sc->pqueue_end];
/* discard the byte if the device is not open */
if ((sc->state & PSM_OPEN) == 0)
continue;
getmicrouptime(&now);
if ((pb->inputbytes > 0) &&
timevalcmp(&now, &sc->inputtimeout, >)) {
VLOG(3, (LOG_DEBUG, "psmintr: delay too long; "
"resetting byte count\n"));
pb->inputbytes = 0;
sc->syncerrors = 0;
sc->pkterrors = 0;
}
sc->inputtimeout.tv_sec = PSM_INPUT_TIMEOUT / 1000000;
sc->inputtimeout.tv_usec = PSM_INPUT_TIMEOUT % 1000000;
timevaladd(&sc->inputtimeout, &now);
- Add write(2) support for psm(4) in native operation level. Now arbitrary commands can be written to /dev/psm%d and status can be read back from it. - Reflect the change in psm(4) and bump version for ports. MFC after: 1 week
2008-04-08 17:55:26 +00:00
Clean up and fix style(9) nits.
2008-04-08 19:09:45 +00:00
pb->ipacket[pb->inputbytes++] = c;
Port the ps/2 mouse driver to the alpha.
1998-11-08 18:43:03 +00:00
Clean up and fix style(9) nits.
2008-04-08 19:09:45 +00:00
if (sc->mode.level == PSM_LEVEL_NATIVE) {
VLOG(4, (LOG_DEBUG, "psmintr: %02x\n", pb->ipacket[0]));
sc->syncerrors = 0;
sc->pkterrors = 0;
goto next;
} else {
if (pb->inputbytes < sc->mode.packetsize)
continue;
Port the ps/2 mouse driver to the alpha.
1998-11-08 18:43:03 +00:00
Clean up and fix style(9) nits.
2008-04-08 19:09:45 +00:00
VLOG(4, (LOG_DEBUG,
"psmintr: %02x %02x %02x %02x %02x %02x\n",
pb->ipacket[0], pb->ipacket[1], pb->ipacket[2],
pb->ipacket[3], pb->ipacket[4], pb->ipacket[5]));
}
c = pb->ipacket[0];
if ((sc->flags & PSM_NEED_SYNCBITS) != 0) {
sc->mode.syncmask[1] = (c & sc->mode.syncmask[0]);
sc->flags &= ~PSM_NEED_SYNCBITS;
VLOG(2, (LOG_DEBUG,
"psmintr: Sync bytes now %04x,%04x\n",
sc->mode.syncmask[0], sc->mode.syncmask[0]));
} else if ((c & sc->mode.syncmask[0]) != sc->mode.syncmask[1]) {
VLOG(3, (LOG_DEBUG, "psmintr: out of sync "
"(%04x != %04x) %d cmds since last error.\n",
c & sc->mode.syncmask[0], sc->mode.syncmask[1],
sc->cmdcount - sc->lasterr));
sc->lasterr = sc->cmdcount;
/*
* The sync byte test is a weak measure of packet
* validity. Conservatively discard any input yet
* to be seen by userland when we detect a sync
* error since there is a good chance some of
* the queued packets have undetected errors.
*/
dropqueue(sc);
if (sc->syncerrors == 0)
sc->pkterrors++;
++sc->syncerrors;
sc->lastinputerr = now;
if (sc->syncerrors >= sc->mode.packetsize * 2 ||
sc->pkterrors >= pkterrthresh) {
/*
* If we've failed to find a single sync byte
* in 2 packets worth of data, or we've seen
* persistent packet errors during the
* validation period, reinitialize the mouse
* in hopes of returning it to the expected
* mode.
*/
VLOG(3, (LOG_DEBUG,
"psmintr: reset the mouse.\n"));
reinitialize(sc, TRUE);
} else if (sc->syncerrors == sc->mode.packetsize) {
/*
* Try a soft reset after searching for a sync
* byte through a packet length of bytes.
*/
VLOG(3, (LOG_DEBUG,
"psmintr: re-enable the mouse.\n"));
pb->inputbytes = 0;
disable_aux_dev(sc->kbdc);
enable_aux_dev(sc->kbdc);
} else {
VLOG(3, (LOG_DEBUG,
"psmintr: discard a byte (%d)\n",
sc->syncerrors));
pb->inputbytes--;
bcopy(&pb->ipacket[1], &pb->ipacket[0],
pb->inputbytes);
}
continue;
}
Improve sync recovery algorithm: o Remove PSM_SYNCERR_THRESHOLD1. This value specified how many sync errors were required before the mouse is re-initialised. Re-initialisation is now done after (packetsize * 2) sync errors as things aren't likely to improve after that. o Reset lastinputerror when re-initialisation occurs. We don't want to continue to drop data after re-initialisation. o Count the number of failed packets independently of the syncerrors statistic. syncerrors is useful for recovering sync within a single packet. pkterrors allows us to detect when the mouse changes its packet mode due to some external event (e.g. KVM switch). o Reinitialize the mouse if we see more than psmpkterrthresh errors during the validation period. The validation period begins as soon as a sync error is detected and continues until psmerrsecs/msecs time has elapsed. The defaults for these two values force a reset if we see two packet errors in a 2 second period. This allows rapid detection of packet framing errors caused by the mouse changing packet modes. o Export psmpkterrthresh as a sysctl o Export psmloglevel as a sysctl. o Enable more debugging code to be enabled at runtime via psmloglevel. o Simplify verbose conditioned loging by using a VLOG macro. o Add several comments describing the sync recovery algorithm of this driver. Large Portions by: Brian Somers <brian@Awfulhak.org> Inspired and Frustrated by: Belkin KVMs Reviewed by: njl, philip
2004-08-27 21:25:16 +00:00
/*
Clean up and fix style(9) nits.
2008-04-08 19:09:45 +00:00
* We have what appears to be a valid packet.
* Reset the error counters.
Improve sync recovery algorithm: o Remove PSM_SYNCERR_THRESHOLD1. This value specified how many sync errors were required before the mouse is re-initialised. Re-initialisation is now done after (packetsize * 2) sync errors as things aren't likely to improve after that. o Reset lastinputerror when re-initialisation occurs. We don't want to continue to drop data after re-initialisation. o Count the number of failed packets independently of the syncerrors statistic. syncerrors is useful for recovering sync within a single packet. pkterrors allows us to detect when the mouse changes its packet mode due to some external event (e.g. KVM switch). o Reinitialize the mouse if we see more than psmpkterrthresh errors during the validation period. The validation period begins as soon as a sync error is detected and continues until psmerrsecs/msecs time has elapsed. The defaults for these two values force a reset if we see two packet errors in a 2 second period. This allows rapid detection of packet framing errors caused by the mouse changing packet modes. o Export psmpkterrthresh as a sysctl o Export psmloglevel as a sysctl. o Enable more debugging code to be enabled at runtime via psmloglevel. o Simplify verbose conditioned loging by using a VLOG macro. o Add several comments describing the sync recovery algorithm of this driver. Large Portions by: Brian Somers <brian@Awfulhak.org> Inspired and Frustrated by: Belkin KVMs Reviewed by: njl, philip
2004-08-27 21:25:16 +00:00
*/
Clean up and fix style(9) nits.
2008-04-08 19:09:45 +00:00
sc->syncerrors = 0;
Improve sync recovery algorithm: o Remove PSM_SYNCERR_THRESHOLD1. This value specified how many sync errors were required before the mouse is re-initialised. Re-initialisation is now done after (packetsize * 2) sync errors as things aren't likely to improve after that. o Reset lastinputerror when re-initialisation occurs. We don't want to continue to drop data after re-initialisation. o Count the number of failed packets independently of the syncerrors statistic. syncerrors is useful for recovering sync within a single packet. pkterrors allows us to detect when the mouse changes its packet mode due to some external event (e.g. KVM switch). o Reinitialize the mouse if we see more than psmpkterrthresh errors during the validation period. The validation period begins as soon as a sync error is detected and continues until psmerrsecs/msecs time has elapsed. The defaults for these two values force a reset if we see two packet errors in a 2 second period. This allows rapid detection of packet framing errors caused by the mouse changing packet modes. o Export psmpkterrthresh as a sysctl o Export psmloglevel as a sysctl. o Enable more debugging code to be enabled at runtime via psmloglevel. o Simplify verbose conditioned loging by using a VLOG macro. o Add several comments describing the sync recovery algorithm of this driver. Large Portions by: Brian Somers <brian@Awfulhak.org> Inspired and Frustrated by: Belkin KVMs Reviewed by: njl, philip
2004-08-27 21:25:16 +00:00
/*
Clean up and fix style(9) nits.
2008-04-08 19:09:45 +00:00
* Drop even good packets if they occur within a timeout
* period of a sync error. This allows the detection of
* a change in the mouse's packet mode without exposing
* erratic mouse behavior to the user. Some KVMs forget
* enhanced mouse modes during switch events.
Improve sync recovery algorithm: o Remove PSM_SYNCERR_THRESHOLD1. This value specified how many sync errors were required before the mouse is re-initialised. Re-initialisation is now done after (packetsize * 2) sync errors as things aren't likely to improve after that. o Reset lastinputerror when re-initialisation occurs. We don't want to continue to drop data after re-initialisation. o Count the number of failed packets independently of the syncerrors statistic. syncerrors is useful for recovering sync within a single packet. pkterrors allows us to detect when the mouse changes its packet mode due to some external event (e.g. KVM switch). o Reinitialize the mouse if we see more than psmpkterrthresh errors during the validation period. The validation period begins as soon as a sync error is detected and continues until psmerrsecs/msecs time has elapsed. The defaults for these two values force a reset if we see two packet errors in a 2 second period. This allows rapid detection of packet framing errors caused by the mouse changing packet modes. o Export psmpkterrthresh as a sysctl o Export psmloglevel as a sysctl. o Enable more debugging code to be enabled at runtime via psmloglevel. o Simplify verbose conditioned loging by using a VLOG macro. o Add several comments describing the sync recovery algorithm of this driver. Large Portions by: Brian Somers <brian@Awfulhak.org> Inspired and Frustrated by: Belkin KVMs Reviewed by: njl, philip
2004-08-27 21:25:16 +00:00
*/
Clean up and fix style(9) nits.
2008-04-08 19:09:45 +00:00
if (!timeelapsed(&sc->lastinputerr, psmerrsecs, psmerrusecs,
&now)) {
pb->inputbytes = 0;
continue;
}
Significantly reduce the "jitter" that is typical for PS/2 mice when using a KVM. There is no actual solution possible, but this gets us pretty close. Typically when switching back to a FreeBSD box and moving the mouse wild data is produced, because the protocol's validation/checksum system is extremely weak it is impossible to determine that we're out of sync before dropping several bogus packets to user land. The actual solution that appears to offer the best clamping of jitter is to buffer the mouse packets if we've not seen mouse activity for more than .5 seconds. Then waiting to flush that data for 1/20th of a second. If within that 20th of a second we get any packets that do fail the weak test we drop the entire queue and back off accepting data from the mouse for 2 seconds and then repeat the whole deal. You can still get _some_ jitter, notably if you switch to the FreeBSD box, then move the mouse just enough to generate one or two packets. Those packets may be bogus, but may still pass the validity check. One way to finally kill the problem once and for all is to check the initial packets for "wild" values. Typically one sees packets in the +/-60 range during normal operation, however when bogus data is generated it's typically near the outer range of +/-120 or more, those packets would be a good candidate for dropping or clamping. I've been running with this for several weeks now and it has significantly helped me stay sane even with a piece of junk Belkin KVM causing wild jitter each and every time I switch. Lastly I'd like to note that my experience with Windows shows me that somehow the Microsoft PS/2 driver typically avoids this problem, but that may only be possible when running the mouse in a dumb-ed down PS/2 mode that Belkin recommends on their site.
2003-12-11 11:28:11 +00:00
Clean up and fix style(9) nits.
2008-04-08 19:09:45 +00:00
/*
* Now that we're out of the validation period, reset
* the packet error count.
*/
sc->pkterrors = 0;
Improve sync recovery algorithm: o Remove PSM_SYNCERR_THRESHOLD1. This value specified how many sync errors were required before the mouse is re-initialised. Re-initialisation is now done after (packetsize * 2) sync errors as things aren't likely to improve after that. o Reset lastinputerror when re-initialisation occurs. We don't want to continue to drop data after re-initialisation. o Count the number of failed packets independently of the syncerrors statistic. syncerrors is useful for recovering sync within a single packet. pkterrors allows us to detect when the mouse changes its packet mode due to some external event (e.g. KVM switch). o Reinitialize the mouse if we see more than psmpkterrthresh errors during the validation period. The validation period begins as soon as a sync error is detected and continues until psmerrsecs/msecs time has elapsed. The defaults for these two values force a reset if we see two packet errors in a 2 second period. This allows rapid detection of packet framing errors caused by the mouse changing packet modes. o Export psmpkterrthresh as a sysctl o Export psmloglevel as a sysctl. o Enable more debugging code to be enabled at runtime via psmloglevel. o Simplify verbose conditioned loging by using a VLOG macro. o Add several comments describing the sync recovery algorithm of this driver. Large Portions by: Brian Somers <brian@Awfulhak.org> Inspired and Frustrated by: Belkin KVMs Reviewed by: njl, philip
2004-08-27 21:25:16 +00:00
Clean up and fix style(9) nits.
2008-04-08 19:09:45 +00:00
sc->cmdcount++;
next:
if (++sc->pqueue_end >= PSM_PACKETQUEUE)
sc->pqueue_end = 0;
/*
* If we've filled the queue then call the softintr ourselves,
* otherwise schedule the interrupt for later.
*/
if (!timeelapsed(&sc->lastsoftintr, psmsecs, psmusecs, &now) ||
(sc->pqueue_end == sc->pqueue_start)) {
if ((sc->state & PSM_SOFTARMED) != 0) {
sc->state &= ~PSM_SOFTARMED;
Use callout(9) instead of timeout(9) to manage timers.
2012-09-07 19:42:36 +00:00
callout_stop(&sc->softcallout);
Clean up and fix style(9) nits.
2008-04-08 19:09:45 +00:00
}
psmsoftintr(arg);
} else if ((sc->state & PSM_SOFTARMED) == 0) {
sc->state |= PSM_SOFTARMED;
Use callout(9) instead of timeout(9) to manage timers.
2012-09-07 19:42:36 +00:00
callout_reset(&sc->softcallout,
psmhz < 1 ? 1 : (hz/psmhz), psmsoftintr, arg);
Significantly reduce the "jitter" that is typical for PS/2 mice when using a KVM. There is no actual solution possible, but this gets us pretty close. Typically when switching back to a FreeBSD box and moving the mouse wild data is produced, because the protocol's validation/checksum system is extremely weak it is impossible to determine that we're out of sync before dropping several bogus packets to user land. The actual solution that appears to offer the best clamping of jitter is to buffer the mouse packets if we've not seen mouse activity for more than .5 seconds. Then waiting to flush that data for 1/20th of a second. If within that 20th of a second we get any packets that do fail the weak test we drop the entire queue and back off accepting data from the mouse for 2 seconds and then repeat the whole deal. You can still get _some_ jitter, notably if you switch to the FreeBSD box, then move the mouse just enough to generate one or two packets. Those packets may be bogus, but may still pass the validity check. One way to finally kill the problem once and for all is to check the initial packets for "wild" values. Typically one sees packets in the +/-60 range during normal operation, however when bogus data is generated it's typically near the outer range of +/-120 or more, those packets would be a good candidate for dropping or clamping. I've been running with this for several weeks now and it has significantly helped me stay sane even with a piece of junk Belkin KVM causing wild jitter each and every time I switch. Lastly I'd like to note that my experience with Windows shows me that somehow the Microsoft PS/2 driver typically avoids this problem, but that may only be possible when running the mouse in a dumb-ed down PS/2 mode that Belkin recommends on their site.
2003-12-11 11:28:11 +00:00
}
}
}
static void
Clean up and fix style(9) nits.
2008-04-08 19:09:45 +00:00
proc_mmanplus(struct psm_softc *sc, packetbuf_t *pb, mousestatus_t *ms,
int *x, int *y, int *z)
Significantly reduce the "jitter" that is typical for PS/2 mice when using a KVM. There is no actual solution possible, but this gets us pretty close. Typically when switching back to a FreeBSD box and moving the mouse wild data is produced, because the protocol's validation/checksum system is extremely weak it is impossible to determine that we're out of sync before dropping several bogus packets to user land. The actual solution that appears to offer the best clamping of jitter is to buffer the mouse packets if we've not seen mouse activity for more than .5 seconds. Then waiting to flush that data for 1/20th of a second. If within that 20th of a second we get any packets that do fail the weak test we drop the entire queue and back off accepting data from the mouse for 2 seconds and then repeat the whole deal. You can still get _some_ jitter, notably if you switch to the FreeBSD box, then move the mouse just enough to generate one or two packets. Those packets may be bogus, but may still pass the validity check. One way to finally kill the problem once and for all is to check the initial packets for "wild" values. Typically one sees packets in the +/-60 range during normal operation, however when bogus data is generated it's typically near the outer range of +/-120 or more, those packets would be a good candidate for dropping or clamping. I've been running with this for several weeks now and it has significantly helped me stay sane even with a piece of junk Belkin KVM causing wild jitter each and every time I switch. Lastly I'd like to note that my experience with Windows shows me that somehow the Microsoft PS/2 driver typically avoids this problem, but that may only be possible when running the mouse in a dumb-ed down PS/2 mode that Belkin recommends on their site.
2003-12-11 11:28:11 +00:00
{
- Add write(2) support for psm(4) in native operation level. Now arbitrary commands can be written to /dev/psm%d and status can be read back from it. - Reflect the change in psm(4) and bump version for ports. MFC after: 1 week
2008-04-08 17:55:26 +00:00
Clean up and fix style(9) nits.
2008-04-08 19:09:45 +00:00
/*
Fix typo: s/protocl/protocol
2012-09-20 10:07:31 +00:00
* PS2++ protocol packet
Clean up and fix style(9) nits.
2008-04-08 19:09:45 +00:00
*
* b7 b6 b5 b4 b3 b2 b1 b0
* byte 1: * 1 p3 p2 1 * * *
* byte 2: c1 c2 p1 p0 d1 d0 1 0
*
* p3-p0: packet type
* c1, c2: c1 & c2 == 1, if p2 == 0
* c1 & c2 == 0, if p2 == 1
*
* packet type: 0 (device type)
* See comments in enable_mmanplus() below.
*
* packet type: 1 (wheel data)
*
* b7 b6 b5 b4 b3 b2 b1 b0
* byte 3: h * B5 B4 s d2 d1 d0
*
* h: 1, if horizontal roller data
* 0, if vertical roller data
* B4, B5: button 4 and 5
* s: sign bit
* d2-d0: roller data
*
* packet type: 2 (reserved)
Port the ps/2 mouse driver to the alpha.
1998-11-08 18:43:03 +00:00
*/
Clean up and fix style(9) nits.
2008-04-08 19:09:45 +00:00
if (((pb->ipacket[0] & MOUSE_PS2PLUS_SYNCMASK) == MOUSE_PS2PLUS_SYNC) &&
(abs(*x) > 191) && MOUSE_PS2PLUS_CHECKBITS(pb->ipacket)) {
/*
* the extended data packet encodes button
* and wheel events
*/
Significantly reduce the "jitter" that is typical for PS/2 mice when using a KVM. There is no actual solution possible, but this gets us pretty close. Typically when switching back to a FreeBSD box and moving the mouse wild data is produced, because the protocol's validation/checksum system is extremely weak it is impossible to determine that we're out of sync before dropping several bogus packets to user land. The actual solution that appears to offer the best clamping of jitter is to buffer the mouse packets if we've not seen mouse activity for more than .5 seconds. Then waiting to flush that data for 1/20th of a second. If within that 20th of a second we get any packets that do fail the weak test we drop the entire queue and back off accepting data from the mouse for 2 seconds and then repeat the whole deal. You can still get _some_ jitter, notably if you switch to the FreeBSD box, then move the mouse just enough to generate one or two packets. Those packets may be bogus, but may still pass the validity check. One way to finally kill the problem once and for all is to check the initial packets for "wild" values. Typically one sees packets in the +/-60 range during normal operation, however when bogus data is generated it's typically near the outer range of +/-120 or more, those packets would be a good candidate for dropping or clamping. I've been running with this for several weeks now and it has significantly helped me stay sane even with a piece of junk Belkin KVM causing wild jitter each and every time I switch. Lastly I'd like to note that my experience with Windows shows me that somehow the Microsoft PS/2 driver typically avoids this problem, but that may only be possible when running the mouse in a dumb-ed down PS/2 mode that Belkin recommends on their site.
2003-12-11 11:28:11 +00:00
switch (MOUSE_PS2PLUS_PACKET_TYPE(pb->ipacket)) {
Improve Logitech MouseMan+ protocol support.
1999-07-12 15:16:14 +00:00
case 1:
Clean up and fix style(9) nits.
2008-04-08 19:09:45 +00:00
/* wheel data packet */
*x = *y = 0;
if (pb->ipacket[2] & 0x80) {
/* XXX horizontal roller count - ignore it */
;
} else {
/* vertical roller count */
*z = (pb->ipacket[2] & MOUSE_PS2PLUS_ZNEG) ?
(pb->ipacket[2] & 0x0f) - 16 :
(pb->ipacket[2] & 0x0f);
}
ms->button |= (pb->ipacket[2] &
MOUSE_PS2PLUS_BUTTON4DOWN) ?
MOUSE_BUTTON4DOWN : 0;
ms->button |= (pb->ipacket[2] &
MOUSE_PS2PLUS_BUTTON5DOWN) ?
MOUSE_BUTTON5DOWN : 0;
break;
Improve Logitech MouseMan+ protocol support.
1999-07-12 15:16:14 +00:00
case 2:
Clean up and fix style(9) nits.
2008-04-08 19:09:45 +00:00
/*
* this packet type is reserved by
* Logitech...
*/
/*
* IBM ScrollPoint Mouse uses this
* packet type to encode both vertical
* and horizontal scroll movement.
*/
*x = *y = 0;
/* horizontal count */
if (pb->ipacket[2] & 0x0f)
*z = (pb->ipacket[2] & MOUSE_SPOINT_WNEG) ?
-2 : 2;
/* vertical count */
if (pb->ipacket[2] & 0xf0)
*z = (pb->ipacket[2] & MOUSE_SPOINT_ZNEG) ?
-1 : 1;
break;
Improve Logitech MouseMan+ protocol support.
1999-07-12 15:16:14 +00:00
case 0:
Clean up and fix style(9) nits.
2008-04-08 19:09:45 +00:00
/* device type packet - shouldn't happen */
/* FALLTHROUGH */
Improve Logitech MouseMan+ protocol support.
1999-07-12 15:16:14 +00:00
default:
Clean up and fix style(9) nits.
2008-04-08 19:09:45 +00:00
*x = *y = 0;
ms->button = ms->obutton;
VLOG(1, (LOG_DEBUG, "psmintr: unknown PS2++ packet "
"type %d: 0x%02x 0x%02x 0x%02x\n",
MOUSE_PS2PLUS_PACKET_TYPE(pb->ipacket),
pb->ipacket[0], pb->ipacket[1], pb->ipacket[2]));
break;
Improve Logitech MouseMan+ protocol support.
1999-07-12 15:16:14 +00:00
}
Clean up and fix style(9) nits.
2008-04-08 19:09:45 +00:00
} else {
Port the ps/2 mouse driver to the alpha.
1998-11-08 18:43:03 +00:00
/* preserve button states */
Clean up and fix style(9) nits.
2008-04-08 19:09:45 +00:00
ms->button |= ms->obutton & MOUSE_EXTBUTTONS;
}
}
- Add Support for the following PS/2 mice: - Microsoft IntelliMouse Explorer: 2 buttons on top, 2 side buttons and a wheel which also acts as the middle button. The mouse is recognized as "IntelliMouse Explorer". - Genius NetScroll Optical: 2 buttons on top, 2 side buttons and a wheel which also acts as the middle button. The mouse is recognized as "NetMouse/NetScroll Optical". - MouseSystems SmartScroll Mouse (OEM from Genius?): 3 buttons on top, 1 side button and a wheel. The mouse is recognized as Genius "NetScroll". - IBM ScrollPoint: 2 buttons on top and a stick between the buttons. The stick can perform "horizontal scroll" in W*ndows environment. The horizontal movement of the stick is detected. It is currently mapped to the Z axis movement in the same way as the first wheel. The mouse is recognized as "MouseMan+", as it is considered to be a variation of MouseMan. - A4 Tech 4D and 4D+ mice. These mice have two wheels! The movement of the second wheel is reported as the Z axis movement in the same way as the first wheel. These mice are recognized as "4D Mouse" and "4D+ Mouse". - Tweak IntelliMouse support code a bit so that less-than-compatible wheel mice can work properly with the psm driver. - Add driver configuration flags which correspond to the kernel options PSM_HOOKRESUME and PSM_RESETAFTERSUSPEND, so that we don't need to recompile the kernel when we need these functions. - Properly keep track of the irq resource. - Add a watchdog timer in case interrupts are lost (experimental). - Add `detach' function (experimental).
2000-03-18 15:21:40 +00:00
Clean up and fix style(9) nits.
2008-04-08 19:09:45 +00:00
static int
proc_synaptics(struct psm_softc *sc, packetbuf_t *pb, mousestatus_t *ms,
int *x, int *y, int *z)
{
static int touchpad_buttons;
static int guest_buttons;
Rewrite Synaptics touchpads support with the following goals in mind: o better quality of the movement smoothing o more features such as tap-hold and virtual scrolling Support must still be enabled with this line in your /boot/loader.conf: hw.psm.synaptics_support="1" The following sysctls were removed: hw.psm.synaptics.low_speed_threshold hw.psm.synaptics.min_movement hw.psm.synaptics.squelch_level An overview of this new driver and a short documentation about the added sysctls is available on the wiki: http://wiki.freebsd.org/SynapticsTouchpad
2008-10-14 17:48:36 +00:00
int w, x0, y0;
Clean up and fix style(9) nits.
2008-04-08 19:09:45 +00:00
psm: Add support for middle and extended buttons on Synaptics touchpads PR: kern/170834 Submitted by: Brandon Gooch <jamesbrandongooch@gmail.com> Tested by: Artyom Mirgorodskiy <artyom.mirgorodsky@gmail.com> MFC after: 1 month
2013-09-02 19:15:20 +00:00
/* TouchPad PS/2 absolute mode message format with capFourButtons:
Clean up and fix style(9) nits.
2008-04-08 19:09:45 +00:00
*
* Bits: 7 6 5 4 3 2 1 0 (LSB)
* ------------------------------------------------
* ipacket[0]: 1 0 W3 W2 0 W1 R L
* ipacket[1]: Yb Ya Y9 Y8 Xb Xa X9 X8
* ipacket[2]: Z7 Z6 Z5 Z4 Z3 Z2 Z1 Z0
psm: Add support for middle and extended buttons on Synaptics touchpads PR: kern/170834 Submitted by: Brandon Gooch <jamesbrandongooch@gmail.com> Tested by: Artyom Mirgorodskiy <artyom.mirgorodsky@gmail.com> MFC after: 1 month
2013-09-02 19:15:20 +00:00
* ipacket[3]: 1 1 Yc Xc 0 W0 D^R U^L
Clean up and fix style(9) nits.
2008-04-08 19:09:45 +00:00
* ipacket[4]: X7 X6 X5 X4 X3 X2 X1 X0
* ipacket[5]: Y7 Y6 Y5 Y4 Y3 Y2 Y1 Y0
*
* Legend:
* L: left physical mouse button
* R: right physical mouse button
* D: down button
* U: up button
* W: "wrist" value
* X: x position
Rewrite Synaptics touchpads support with the following goals in mind: o better quality of the movement smoothing o more features such as tap-hold and virtual scrolling Support must still be enabled with this line in your /boot/loader.conf: hw.psm.synaptics_support="1" The following sysctls were removed: hw.psm.synaptics.low_speed_threshold hw.psm.synaptics.min_movement hw.psm.synaptics.squelch_level An overview of this new driver and a short documentation about the added sysctls is available on the wiki: http://wiki.freebsd.org/SynapticsTouchpad
2008-10-14 17:48:36 +00:00
* Y: y position
Clean up and fix style(9) nits.
2008-04-08 19:09:45 +00:00
* Z: pressure
*
psm: Add support for middle and extended buttons on Synaptics touchpads PR: kern/170834 Submitted by: Brandon Gooch <jamesbrandongooch@gmail.com> Tested by: Artyom Mirgorodskiy <artyom.mirgorodsky@gmail.com> MFC after: 1 month
2013-09-02 19:15:20 +00:00
* Without capFourButtons but with nExtendeButtons and/or capMiddle
*
* Bits: 7 6 5 4 3 2 1 0 (LSB)
* ------------------------------------------------------
* ipacket[3]: 1 1 Yc Xc 0 W0 E^R M^L
* ipacket[4]: X7 X6 X5 X4 X3|b7 X2|b5 X1|b3 X0|b1
* ipacket[5]: Y7 Y6 Y5 Y4 Y3|b8 Y2|b6 Y1|b4 Y0|b2
*
* Legend:
* M: Middle physical mouse button
* E: Extended mouse buttons reported instead of low bits of X and Y
* b1-b8: Extended mouse buttons
* Only ((nExtendedButtons + 1) >> 1) bits are used in packet
* 4 and 5, for reading X and Y value they should be zeroed.
*
Clean up and fix style(9) nits.
2008-04-08 19:09:45 +00:00
* Absolute reportable limits: 0 - 6143.
* Typical bezel limits: 1472 - 5472.
* Typical edge marings: 1632 - 5312.
*
* w = 3 Passthrough Packet
*
* Byte 2,5,6 == Byte 1,2,3 of "Guest"
*/
Introduce a tunable to disable support for Synaptics touchpads. A number of people have reported problems (stickyness, aiming difficulty) which is proving difficult to fix, so this will default to disable until sometime after 5.3R. To enable Synaptics support, set the 'hw.psm.synaptics_support=1' tunable. MT5 candidate. Approved by: njl
2004-09-29 23:49:57 +00:00
Clean up and fix style(9) nits.
2008-04-08 19:09:45 +00:00
if (!synaptics_support)
return (0);
Add support for the Synaptics Touchpad mouse driver. I reworked the submitted version with style cleanups and changes to comments. I also modified the ioctl interface. This version only has one ioctl (to get the Synaptics-specific config parameters) since this is the only information a user might want. Submitted by: Arne Schwabe <arne -at- rfc2549.org>
2004-07-30 00:59:40 +00:00
Clean up and fix style(9) nits.
2008-04-08 19:09:45 +00:00
/* Sanity check for out of sync packets. */
if ((pb->ipacket[0] & 0xc8) != 0x80 ||
(pb->ipacket[3] & 0xc8) != 0xc0)
return (-1);
Add support for the Synaptics Touchpad mouse driver. I reworked the submitted version with style cleanups and changes to comments. I also modified the ioctl interface. This version only has one ioctl (to get the Synaptics-specific config parameters) since this is the only information a user might want. Submitted by: Arne Schwabe <arne -at- rfc2549.org>
2004-07-30 00:59:40 +00:00
Rewrite Synaptics touchpads support with the following goals in mind: o better quality of the movement smoothing o more features such as tap-hold and virtual scrolling Support must still be enabled with this line in your /boot/loader.conf: hw.psm.synaptics_support="1" The following sysctls were removed: hw.psm.synaptics.low_speed_threshold hw.psm.synaptics.min_movement hw.psm.synaptics.squelch_level An overview of this new driver and a short documentation about the added sysctls is available on the wiki: http://wiki.freebsd.org/SynapticsTouchpad
2008-10-14 17:48:36 +00:00
*x = *y = 0;
Assume a finger of regular width when no width value is reported by the touchpad (which happens when it has no extended capabilities). Spotted by: dhw Forgotten by: philip
2004-08-08 01:26:00 +00:00
Rewrite Synaptics touchpads support with the following goals in mind: o better quality of the movement smoothing o more features such as tap-hold and virtual scrolling Support must still be enabled with this line in your /boot/loader.conf: hw.psm.synaptics_support="1" The following sysctls were removed: hw.psm.synaptics.low_speed_threshold hw.psm.synaptics.min_movement hw.psm.synaptics.squelch_level An overview of this new driver and a short documentation about the added sysctls is available on the wiki: http://wiki.freebsd.org/SynapticsTouchpad
2008-10-14 17:48:36 +00:00
/*
* Pressure value.
* Interpretation:
* z = 0 No finger contact
* z = 10 Finger hovering near the pad
* z = 30 Very light finger contact
* z = 80 Normal finger contact
* z = 110 Very heavy finger contact
* z = 200 Finger lying flat on pad surface
* z = 255 Maximum reportable Z
*/
Clean up and fix style(9) nits.
2008-04-08 19:09:45 +00:00
*z = pb->ipacket[2];
Rewrite Synaptics touchpads support with the following goals in mind: o better quality of the movement smoothing o more features such as tap-hold and virtual scrolling Support must still be enabled with this line in your /boot/loader.conf: hw.psm.synaptics_support="1" The following sysctls were removed: hw.psm.synaptics.low_speed_threshold hw.psm.synaptics.min_movement hw.psm.synaptics.squelch_level An overview of this new driver and a short documentation about the added sysctls is available on the wiki: http://wiki.freebsd.org/SynapticsTouchpad
2008-10-14 17:48:36 +00:00
/*
* Finger width value
* Interpretation:
* w = 0 Two finger on the pad (capMultiFinger needed)
* w = 1 Three or more fingers (capMultiFinger needed)
* w = 2 Pen (instead of finger) (capPen needed)
* w = 3 Reserved (passthrough?)
* w = 4-7 Finger of normal width (capPalmDetect needed)
* w = 8-14 Very wide finger or palm (capPalmDetect needed)
* w = 15 Maximum reportable width (capPalmDetect needed)
*/
/* XXX Is checking capExtended enough? */
Clean up and fix style(9) nits.
2008-04-08 19:09:45 +00:00
if (sc->synhw.capExtended)
Assume a finger of regular width when no width value is reported by the touchpad (which happens when it has no extended capabilities). Spotted by: dhw Forgotten by: philip
2004-08-08 01:26:00 +00:00
w = ((pb->ipacket[0] & 0x30) >> 2) |
((pb->ipacket[0] & 0x04) >> 1) |
((pb->ipacket[3] & 0x04) >> 2);
Clean up and fix style(9) nits.
2008-04-08 19:09:45 +00:00
else {
Rewrite Synaptics touchpads support with the following goals in mind: o better quality of the movement smoothing o more features such as tap-hold and virtual scrolling Support must still be enabled with this line in your /boot/loader.conf: hw.psm.synaptics_support="1" The following sysctls were removed: hw.psm.synaptics.low_speed_threshold hw.psm.synaptics.min_movement hw.psm.synaptics.squelch_level An overview of this new driver and a short documentation about the added sysctls is available on the wiki: http://wiki.freebsd.org/SynapticsTouchpad
2008-10-14 17:48:36 +00:00
/* Assume a finger of regular width. */
Assume a finger of regular width when no width value is reported by the touchpad (which happens when it has no extended capabilities). Spotted by: dhw Forgotten by: philip
2004-08-08 01:26:00 +00:00
w = 4;
Clean up and fix style(9) nits.
2008-04-08 19:09:45 +00:00
}
Add support for the Synaptics Touchpad mouse driver. I reworked the submitted version with style cleanups and changes to comments. I also modified the ioctl interface. This version only has one ioctl (to get the Synaptics-specific config parameters) since this is the only information a user might want. Submitted by: Arne Schwabe <arne -at- rfc2549.org>
2004-07-30 00:59:40 +00:00
psm: Add support for middle and extended buttons on Synaptics touchpads PR: kern/170834 Submitted by: Brandon Gooch <jamesbrandongooch@gmail.com> Tested by: Artyom Mirgorodskiy <artyom.mirgorodsky@gmail.com> MFC after: 1 month
2013-09-02 19:15:20 +00:00
/*
* Handle packets from the guest device. See:
* Synaptics PS/2 TouchPad Interfacing Guide, Section 5.1
*/
Clean up and fix style(9) nits.
2008-04-08 19:09:45 +00:00
if (w == 3 && sc->synhw.capPassthrough) {
*x = ((pb->ipacket[1] & 0x10) ?
Update support for Synaptics Touchpads (Volume V) o Add (long awaited) support for guest devices Submitted by: Arne Schwabe <arne@rfc2549.org> Approved by: njl (in a former revision)
2004-08-16 16:28:27 +00:00
pb->ipacket[4] - 256 : pb->ipacket[4]);
Clean up and fix style(9) nits.
2008-04-08 19:09:45 +00:00
*y = ((pb->ipacket[1] & 0x20) ?
Update support for Synaptics Touchpads (Volume V) o Add (long awaited) support for guest devices Submitted by: Arne Schwabe <arne@rfc2549.org> Approved by: njl (in a former revision)
2004-08-16 16:28:27 +00:00
pb->ipacket[5] - 256 : pb->ipacket[5]);
Clean up and fix style(9) nits.
2008-04-08 19:09:45 +00:00
*z = 0;
Update support for Synaptics Touchpads (Volume V) o Add (long awaited) support for guest devices Submitted by: Arne Schwabe <arne@rfc2549.org> Approved by: njl (in a former revision)
2004-08-16 16:28:27 +00:00
guest_buttons = 0;
if (pb->ipacket[1] & 0x01)
Clean up and fix style(9) nits.
2008-04-08 19:09:45 +00:00
guest_buttons |= MOUSE_BUTTON1DOWN;
Update support for Synaptics Touchpads (Volume V) o Add (long awaited) support for guest devices Submitted by: Arne Schwabe <arne@rfc2549.org> Approved by: njl (in a former revision)
2004-08-16 16:28:27 +00:00
if (pb->ipacket[1] & 0x04)
Clean up and fix style(9) nits.
2008-04-08 19:09:45 +00:00
guest_buttons |= MOUSE_BUTTON2DOWN;
Update support for Synaptics Touchpads (Volume V) o Add (long awaited) support for guest devices Submitted by: Arne Schwabe <arne@rfc2549.org> Approved by: njl (in a former revision)
2004-08-16 16:28:27 +00:00
if (pb->ipacket[1] & 0x02)
Clean up and fix style(9) nits.
2008-04-08 19:09:45 +00:00
guest_buttons |= MOUSE_BUTTON3DOWN;
Update support for Synaptics Touchpads (Volume V) o Add (long awaited) support for guest devices Submitted by: Arne Schwabe <arne@rfc2549.org> Approved by: njl (in a former revision)
2004-08-16 16:28:27 +00:00
Clean up and fix style(9) nits.
2008-04-08 19:09:45 +00:00
ms->button = touchpad_buttons | guest_buttons;
Rewrite Synaptics touchpads support with the following goals in mind: o better quality of the movement smoothing o more features such as tap-hold and virtual scrolling Support must still be enabled with this line in your /boot/loader.conf: hw.psm.synaptics_support="1" The following sysctls were removed: hw.psm.synaptics.low_speed_threshold hw.psm.synaptics.min_movement hw.psm.synaptics.squelch_level An overview of this new driver and a short documentation about the added sysctls is available on the wiki: http://wiki.freebsd.org/SynapticsTouchpad
2008-10-14 17:48:36 +00:00
goto SYNAPTICS_END;
Clean up and fix style(9) nits.
2008-04-08 19:09:45 +00:00
}
Update support for Synaptics Touchpads (Volume V) o Add (long awaited) support for guest devices Submitted by: Arne Schwabe <arne@rfc2549.org> Approved by: njl (in a former revision)
2004-08-16 16:28:27 +00:00
Add support for controlling the trackpoint when Synaptics is enabled. To accomplish this, we must put the Synaptics hardware in passthrough mode when talking to the trackpoint. I only performed minor style modifications. Submitted by: Jan Kokemüller <jan.kokemueller at gmail.com> MFC after: 1 week
2015-04-11 18:45:22 +00:00
if (sc->syninfo.touchpad_off) {
*x = *y = *z = 0;
ms->button = ms->obutton;
goto SYNAPTICS_END;
}
Clean up and fix style(9) nits.
2008-04-08 19:09:45 +00:00
/* Button presses */
touchpad_buttons = 0;
if (pb->ipacket[0] & 0x01)
touchpad_buttons |= MOUSE_BUTTON1DOWN;
if (pb->ipacket[0] & 0x02)
touchpad_buttons |= MOUSE_BUTTON3DOWN;
Add support for the Synaptics Touchpad mouse driver. I reworked the submitted version with style cleanups and changes to comments. I also modified the ioctl interface. This version only has one ioctl (to get the Synaptics-specific config parameters) since this is the only information a user might want. Submitted by: Arne Schwabe <arne -at- rfc2549.org>
2004-07-30 00:59:40 +00:00
Clean up and fix style(9) nits.
2008-04-08 19:09:45 +00:00
if (sc->synhw.capExtended && sc->synhw.capFourButtons) {
psm: Add support for middle and extended buttons on Synaptics touchpads PR: kern/170834 Submitted by: Brandon Gooch <jamesbrandongooch@gmail.com> Tested by: Artyom Mirgorodskiy <artyom.mirgorodsky@gmail.com> MFC after: 1 month
2013-09-02 19:15:20 +00:00
if ((pb->ipacket[3] ^ pb->ipacket[0]) & 0x01)
Make life for owners of Synaptics Touchpads more pleasant :-) o Implement a shiny new algorithm to keep track of finger movement at slow speeds. This dramatically reduces the level of questionable language from users trying to resize windows. o Properly catch the many extra buttons and dials which manufacturers are known to screw onto Synaptics touchpad controllers. Currently, up to seven buttons are known to work, more should work too. o Add a number of sysctls allowing one to tune the driver to taste in a simple way: # Should the extra buttons act as axes or as middle button hw.psm.synaptics.directional_scrolls # These control the 'stickiness' at low speeds hw.psm.synaptics.low_speed_threshold hw.psm.synaptics.min_movement hw.psm.synaptics.squelch_level PR: kern/75725 Submitted by: Jason Kuri <jay@oneway.com> MFC after: 1 month
2005-01-10 13:05:58 +00:00
touchpad_buttons |= MOUSE_BUTTON4DOWN;
psm: Add support for middle and extended buttons on Synaptics touchpads PR: kern/170834 Submitted by: Brandon Gooch <jamesbrandongooch@gmail.com> Tested by: Artyom Mirgorodskiy <artyom.mirgorodsky@gmail.com> MFC after: 1 month
2013-09-02 19:15:20 +00:00
if ((pb->ipacket[3] ^ pb->ipacket[0]) & 0x02)
Make life for owners of Synaptics Touchpads more pleasant :-) o Implement a shiny new algorithm to keep track of finger movement at slow speeds. This dramatically reduces the level of questionable language from users trying to resize windows. o Properly catch the many extra buttons and dials which manufacturers are known to screw onto Synaptics touchpad controllers. Currently, up to seven buttons are known to work, more should work too. o Add a number of sysctls allowing one to tune the driver to taste in a simple way: # Should the extra buttons act as axes or as middle button hw.psm.synaptics.directional_scrolls # These control the 'stickiness' at low speeds hw.psm.synaptics.low_speed_threshold hw.psm.synaptics.min_movement hw.psm.synaptics.squelch_level PR: kern/75725 Submitted by: Jason Kuri <jay@oneway.com> MFC after: 1 month
2005-01-10 13:05:58 +00:00
touchpad_buttons |= MOUSE_BUTTON5DOWN;
Synaptics: don't report the middle button when clickPad is used. On trackpads that had support for both, we were sending two button events when the trackpad was pressed. Tested by: Jakob Alvermark <jakob at alvermark.net> MFC after: 1 week
2015-04-18 20:55:55 +00:00
} else if (sc->synhw.capExtended && sc->synhw.capMiddle &&
!sc->synhw.capClickPad) {
psm: Add support for middle and extended buttons on Synaptics touchpads PR: kern/170834 Submitted by: Brandon Gooch <jamesbrandongooch@gmail.com> Tested by: Artyom Mirgorodskiy <artyom.mirgorodsky@gmail.com> MFC after: 1 month
2013-09-02 19:15:20 +00:00
/* Middle Button */
if ((pb->ipacket[0] ^ pb->ipacket[3]) & 0x01)
touchpad_buttons |= MOUSE_BUTTON2DOWN;
} else if (sc->synhw.capExtended && (sc->synhw.nExtendedButtons > 0)) {
/* Extended Buttons */
if ((pb->ipacket[0] ^ pb->ipacket[3]) & 0x02) {
if (sc->syninfo.directional_scrolls) {
if (pb->ipacket[4] & 0x01)
touchpad_buttons |= MOUSE_BUTTON4DOWN;
if (pb->ipacket[5] & 0x01)
touchpad_buttons |= MOUSE_BUTTON5DOWN;
if (pb->ipacket[4] & 0x02)
touchpad_buttons |= MOUSE_BUTTON6DOWN;
if (pb->ipacket[5] & 0x02)
touchpad_buttons |= MOUSE_BUTTON7DOWN;
} else {
Improve Synaptics support for newer touchpads. Enable two finger scrolling by default and disable the edge scrolling if the touchpad has no physical zone for it. Disable directional scrolling by default to avoid using extended buttons as scroll buttons. Add support for ClickPad. On Lenovo laptops, this is the button reported when one presses the touchpad. While there, fix a problem where the extended buttons were not reporting the button release event correctly: we need to save the state of the buttons and report it to sysmouse until we receive a packet from the touchpad indicating the button has been released. This makes it possible to use an extended button to resize a window. On Lenovo laptops, the major buttons are actually reported as extended buttons. Tested by: many (current@) MFC after: 1 week
2015-04-11 18:44:07 +00:00
if (pb->ipacket[4] & 0x01)
touchpad_buttons |= MOUSE_BUTTON1DOWN;
if (pb->ipacket[5] & 0x01)
touchpad_buttons |= MOUSE_BUTTON3DOWN;
if (pb->ipacket[4] & 0x02)
touchpad_buttons |= MOUSE_BUTTON2DOWN;
sc->extended_buttons = touchpad_buttons;
psm: Add support for middle and extended buttons on Synaptics touchpads PR: kern/170834 Submitted by: Brandon Gooch <jamesbrandongooch@gmail.com> Tested by: Artyom Mirgorodskiy <artyom.mirgorodsky@gmail.com> MFC after: 1 month
2013-09-02 19:15:20 +00:00
}
/*
* Zero out bits used by extended buttons to avoid
* misinterpretation of the data absolute position.
*
* The bits represented by
*
* (nExtendedButtons + 1) >> 1
*
* will be masked out in both bytes.
* The mask for n bits is computed with the formula
*
* (1 << n) - 1
*/
int maskedbits = 0;
int mask = 0;
maskedbits = (sc->synhw.nExtendedButtons + 1) >> 1;
mask = (1 << maskedbits) - 1;
pb->ipacket[4] &= ~(mask);
pb->ipacket[5] &= ~(mask);
Improve Synaptics support for newer touchpads. Enable two finger scrolling by default and disable the edge scrolling if the touchpad has no physical zone for it. Disable directional scrolling by default to avoid using extended buttons as scroll buttons. Add support for ClickPad. On Lenovo laptops, this is the button reported when one presses the touchpad. While there, fix a problem where the extended buttons were not reporting the button release event correctly: we need to save the state of the buttons and report it to sysmouse until we receive a packet from the touchpad indicating the button has been released. This makes it possible to use an extended button to resize a window. On Lenovo laptops, the major buttons are actually reported as extended buttons. Tested by: many (current@) MFC after: 1 week
2015-04-11 18:44:07 +00:00
} else if (!sc->syninfo.directional_scrolls &&
!sc->synaction.in_vscroll) {
/*
* Keep reporting MOUSE DOWN until we get a new packet
* indicating otherwise.
*/
touchpad_buttons |= sc->extended_buttons;
Make life for owners of Synaptics Touchpads more pleasant :-) o Implement a shiny new algorithm to keep track of finger movement at slow speeds. This dramatically reduces the level of questionable language from users trying to resize windows. o Properly catch the many extra buttons and dials which manufacturers are known to screw onto Synaptics touchpad controllers. Currently, up to seven buttons are known to work, more should work too. o Add a number of sysctls allowing one to tune the driver to taste in a simple way: # Should the extra buttons act as axes or as middle button hw.psm.synaptics.directional_scrolls # These control the 'stickiness' at low speeds hw.psm.synaptics.low_speed_threshold hw.psm.synaptics.min_movement hw.psm.synaptics.squelch_level PR: kern/75725 Submitted by: Jason Kuri <jay@oneway.com> MFC after: 1 month
2005-01-10 13:05:58 +00:00
}
Clean up and fix style(9) nits.
2008-04-08 19:09:45 +00:00
}
Improve Synaptics support for newer touchpads. Enable two finger scrolling by default and disable the edge scrolling if the touchpad has no physical zone for it. Disable directional scrolling by default to avoid using extended buttons as scroll buttons. Add support for ClickPad. On Lenovo laptops, this is the button reported when one presses the touchpad. While there, fix a problem where the extended buttons were not reporting the button release event correctly: we need to save the state of the buttons and report it to sysmouse until we receive a packet from the touchpad indicating the button has been released. This makes it possible to use an extended button to resize a window. On Lenovo laptops, the major buttons are actually reported as extended buttons. Tested by: many (current@) MFC after: 1 week
2015-04-11 18:44:07 +00:00
/* Handle ClickPad. */
if (sc->synhw.capClickPad &&
((pb->ipacket[0] ^ pb->ipacket[3]) & 0x01))
touchpad_buttons |= MOUSE_BUTTON1DOWN;
Make life for owners of Synaptics Touchpads more pleasant :-) o Implement a shiny new algorithm to keep track of finger movement at slow speeds. This dramatically reduces the level of questionable language from users trying to resize windows. o Properly catch the many extra buttons and dials which manufacturers are known to screw onto Synaptics touchpad controllers. Currently, up to seven buttons are known to work, more should work too. o Add a number of sysctls allowing one to tune the driver to taste in a simple way: # Should the extra buttons act as axes or as middle button hw.psm.synaptics.directional_scrolls # These control the 'stickiness' at low speeds hw.psm.synaptics.low_speed_threshold hw.psm.synaptics.min_movement hw.psm.synaptics.squelch_level PR: kern/75725 Submitted by: Jason Kuri <jay@oneway.com> MFC after: 1 month
2005-01-10 13:05:58 +00:00
Clean up and fix style(9) nits.
2008-04-08 19:09:45 +00:00
ms->button = touchpad_buttons | guest_buttons;
Make life for owners of Synaptics Touchpads more pleasant :-) o Implement a shiny new algorithm to keep track of finger movement at slow speeds. This dramatically reduces the level of questionable language from users trying to resize windows. o Properly catch the many extra buttons and dials which manufacturers are known to screw onto Synaptics touchpad controllers. Currently, up to seven buttons are known to work, more should work too. o Add a number of sysctls allowing one to tune the driver to taste in a simple way: # Should the extra buttons act as axes or as middle button hw.psm.synaptics.directional_scrolls # These control the 'stickiness' at low speeds hw.psm.synaptics.low_speed_threshold hw.psm.synaptics.min_movement hw.psm.synaptics.squelch_level PR: kern/75725 Submitted by: Jason Kuri <jay@oneway.com> MFC after: 1 month
2005-01-10 13:05:58 +00:00
Improve Synaptics support for newer touchpads. Enable two finger scrolling by default and disable the edge scrolling if the touchpad has no physical zone for it. Disable directional scrolling by default to avoid using extended buttons as scroll buttons. Add support for ClickPad. On Lenovo laptops, this is the button reported when one presses the touchpad. While there, fix a problem where the extended buttons were not reporting the button release event correctly: we need to save the state of the buttons and report it to sysmouse until we receive a packet from the touchpad indicating the button has been released. This makes it possible to use an extended button to resize a window. On Lenovo laptops, the major buttons are actually reported as extended buttons. Tested by: many (current@) MFC after: 1 week
2015-04-11 18:44:07 +00:00
/*
* Check pressure to detect a real wanted action on the
* touchpad.
*/
Rewrite Synaptics touchpads support with the following goals in mind: o better quality of the movement smoothing o more features such as tap-hold and virtual scrolling Support must still be enabled with this line in your /boot/loader.conf: hw.psm.synaptics_support="1" The following sysctls were removed: hw.psm.synaptics.low_speed_threshold hw.psm.synaptics.min_movement hw.psm.synaptics.squelch_level An overview of this new driver and a short documentation about the added sysctls is available on the wiki: http://wiki.freebsd.org/SynapticsTouchpad
2008-10-14 17:48:36 +00:00
if (*z >= sc->syninfo.min_pressure) {
synapticsaction_t *synaction;
int cursor, peer, window;
int dx, dy, dxp, dyp;
int max_width, max_pressure;
int margin_top, margin_right, margin_bottom, margin_left;
int na_top, na_right, na_bottom, na_left;
int window_min, window_max;
int multiplicator;
int weight_current, weight_previous, weight_len_squared;
int div_min, div_max, div_len;
int vscroll_hor_area, vscroll_ver_area;
Improve Synaptics support for newer touchpads. Enable two finger scrolling by default and disable the edge scrolling if the touchpad has no physical zone for it. Disable directional scrolling by default to avoid using extended buttons as scroll buttons. Add support for ClickPad. On Lenovo laptops, this is the button reported when one presses the touchpad. While there, fix a problem where the extended buttons were not reporting the button release event correctly: we need to save the state of the buttons and report it to sysmouse until we receive a packet from the touchpad indicating the button has been released. This makes it possible to use an extended button to resize a window. On Lenovo laptops, the major buttons are actually reported as extended buttons. Tested by: many (current@) MFC after: 1 week
2015-04-11 18:44:07 +00:00
int two_finger_scroll;
Rewrite Synaptics touchpads support with the following goals in mind: o better quality of the movement smoothing o more features such as tap-hold and virtual scrolling Support must still be enabled with this line in your /boot/loader.conf: hw.psm.synaptics_support="1" The following sysctls were removed: hw.psm.synaptics.low_speed_threshold hw.psm.synaptics.min_movement hw.psm.synaptics.squelch_level An overview of this new driver and a short documentation about the added sysctls is available on the wiki: http://wiki.freebsd.org/SynapticsTouchpad
2008-10-14 17:48:36 +00:00
int len, weight_prev_x, weight_prev_y;
int div_max_x, div_max_y, div_x, div_y;
When exiting two-finger scroll the Synaptics device may report a jump in absolute position. This seems to be correlated with only removing a single finger. To work around this report no movement on from the first packet when the user exits scrolling.
2015-12-14 11:13:50 +00:00
int exiting_scroll;
Rewrite Synaptics touchpads support with the following goals in mind: o better quality of the movement smoothing o more features such as tap-hold and virtual scrolling Support must still be enabled with this line in your /boot/loader.conf: hw.psm.synaptics_support="1" The following sysctls were removed: hw.psm.synaptics.low_speed_threshold hw.psm.synaptics.min_movement hw.psm.synaptics.squelch_level An overview of this new driver and a short documentation about the added sysctls is available on the wiki: http://wiki.freebsd.org/SynapticsTouchpad
2008-10-14 17:48:36 +00:00
/* Read sysctl. */
/* XXX Verify values? */
max_width = sc->syninfo.max_width;
max_pressure = sc->syninfo.max_pressure;
margin_top = sc->syninfo.margin_top;
margin_right = sc->syninfo.margin_right;
margin_bottom = sc->syninfo.margin_bottom;
margin_left = sc->syninfo.margin_left;
na_top = sc->syninfo.na_top;
na_right = sc->syninfo.na_right;
na_bottom = sc->syninfo.na_bottom;
na_left = sc->syninfo.na_left;
window_min = sc->syninfo.window_min;
window_max = sc->syninfo.window_max;
multiplicator = sc->syninfo.multiplicator;
weight_current = sc->syninfo.weight_current;
weight_previous = sc->syninfo.weight_previous;
weight_len_squared = sc->syninfo.weight_len_squared;
div_min = sc->syninfo.div_min;
div_max = sc->syninfo.div_max;
div_len = sc->syninfo.div_len;
vscroll_hor_area = sc->syninfo.vscroll_hor_area;
vscroll_ver_area = sc->syninfo.vscroll_ver_area;
Improve Synaptics support for newer touchpads. Enable two finger scrolling by default and disable the edge scrolling if the touchpad has no physical zone for it. Disable directional scrolling by default to avoid using extended buttons as scroll buttons. Add support for ClickPad. On Lenovo laptops, this is the button reported when one presses the touchpad. While there, fix a problem where the extended buttons were not reporting the button release event correctly: we need to save the state of the buttons and report it to sysmouse until we receive a packet from the touchpad indicating the button has been released. This makes it possible to use an extended button to resize a window. On Lenovo laptops, the major buttons are actually reported as extended buttons. Tested by: many (current@) MFC after: 1 week
2015-04-11 18:44:07 +00:00
two_finger_scroll = sc->syninfo.two_finger_scroll;
Rewrite Synaptics touchpads support with the following goals in mind: o better quality of the movement smoothing o more features such as tap-hold and virtual scrolling Support must still be enabled with this line in your /boot/loader.conf: hw.psm.synaptics_support="1" The following sysctls were removed: hw.psm.synaptics.low_speed_threshold hw.psm.synaptics.min_movement hw.psm.synaptics.squelch_level An overview of this new driver and a short documentation about the added sysctls is available on the wiki: http://wiki.freebsd.org/SynapticsTouchpad
2008-10-14 17:48:36 +00:00
When exiting two-finger scroll the Synaptics device may report a jump in absolute position. This seems to be correlated with only removing a single finger. To work around this report no movement on from the first packet when the user exits scrolling.
2015-12-14 11:13:50 +00:00
exiting_scroll = 0;
Rewrite Synaptics touchpads support with the following goals in mind: o better quality of the movement smoothing o more features such as tap-hold and virtual scrolling Support must still be enabled with this line in your /boot/loader.conf: hw.psm.synaptics_support="1" The following sysctls were removed: hw.psm.synaptics.low_speed_threshold hw.psm.synaptics.min_movement hw.psm.synaptics.squelch_level An overview of this new driver and a short documentation about the added sysctls is available on the wiki: http://wiki.freebsd.org/SynapticsTouchpad
2008-10-14 17:48:36 +00:00
/* Palm detection. */
if (!(
synaptics: more support for semi-MT trackpads. Several improvements to the Synaptics driver to support semi-multitouch trackpads and some other fixes: - Two finger scrolling support for "semi-MT" touchpads. Those include many of the older Synaptics touchpads before "true" multitouch support (indicated by capMultiFinger). Semi-MT touchpads can report a second finger position, but the X or Y coordinate may be swapped with some coordinate of the first finger. This is a result of how the hardware works internally. Therefore, all that can be reliably extracted is the bounding box of the two finger positions. Semi-MT touchpads can be recognized by the capAdvancedGestures capability bit. After setting the mode byte, advanced gestures mode has to be enabled. Then, data packets compatible with the capMultiFinger format are sent, so the same two finger scrolling code can be leveraged. Enabling advanced gestures mode on true multitouch touchpads should be harmless. Linux seems to always enable advanced gestures mode. - Put mode setting logic into own functions synaptics_preferred_mode() and synaptics_set_mode() to have this in one place. synaptics_passthrough_on() and synaptics_passthrough_off() currently always use 0xc1 as the mode byte, which may be wrong for touchpads that don't have capExtended. - Expose X and Y resolution of touchpad to userland. Also expose minimum and maximum X and Y coordinates. This is useful for programs in userspace that read raw PSM packets (with PSM_LEVEL_NATIVE enabled) and need to interpret the coordinates. - Also send "extended w mode" packets (see section 3.2.9 of 511-000275-01_RevB.pdf) to userspace if PSM_LEVEL_NATIVE is enabled. This is useful for userspace programs/drivers such as xf86-input-synaptics that can handle these packets. - Fix parsing of nExtendedQueries, and request extended/continued capability bits depending on this value. - capReportsMax, capClearPad, capAdvancedGestures and capCoveredPad must be extracted from status[0] and not status[2], I think. Submitted by: Jan Kokemüller jan.kokemueller at gmail.com
2015-05-10 20:36:57 +00:00
((sc->synhw.capMultiFinger ||
sc->synhw.capAdvancedGestures) && (w == 0 || w == 1)) ||
Rewrite Synaptics touchpads support with the following goals in mind: o better quality of the movement smoothing o more features such as tap-hold and virtual scrolling Support must still be enabled with this line in your /boot/loader.conf: hw.psm.synaptics_support="1" The following sysctls were removed: hw.psm.synaptics.low_speed_threshold hw.psm.synaptics.min_movement hw.psm.synaptics.squelch_level An overview of this new driver and a short documentation about the added sysctls is available on the wiki: http://wiki.freebsd.org/SynapticsTouchpad
2008-10-14 17:48:36 +00:00
(sc->synhw.capPalmDetect && w >= 4 && w <= max_width) ||
(!sc->synhw.capPalmDetect && *z <= max_pressure) ||
(sc->synhw.capPen && w == 2))) {
/*
* We consider the packet irrelevant for the current
* action when:
* - the width isn't comprised in:
* [4; max_width]
* - the pressure isn't comprised in:
* [min_pressure; max_pressure]
* - pen aren't supported but w is 2
*
* Note that this doesn't terminate the current action.
*/
VLOG(2, (LOG_DEBUG,
"synaptics: palm detected! (%d)\n", w));
goto SYNAPTICS_END;
}
/* Read current absolute position. */
Add support for the Synaptics Touchpad mouse driver. I reworked the submitted version with style cleanups and changes to comments. I also modified the ioctl interface. This version only has one ioctl (to get the Synaptics-specific config parameters) since this is the only information a user might want. Submitted by: Arne Schwabe <arne -at- rfc2549.org>
2004-07-30 00:59:40 +00:00
x0 = ((pb->ipacket[3] & 0x10) << 8) |
Rewrite Synaptics touchpads support with the following goals in mind: o better quality of the movement smoothing o more features such as tap-hold and virtual scrolling Support must still be enabled with this line in your /boot/loader.conf: hw.psm.synaptics_support="1" The following sysctls were removed: hw.psm.synaptics.low_speed_threshold hw.psm.synaptics.min_movement hw.psm.synaptics.squelch_level An overview of this new driver and a short documentation about the added sysctls is available on the wiki: http://wiki.freebsd.org/SynapticsTouchpad
2008-10-14 17:48:36 +00:00
((pb->ipacket[1] & 0x0f) << 8) |
pb->ipacket[4];
Add support for the Synaptics Touchpad mouse driver. I reworked the submitted version with style cleanups and changes to comments. I also modified the ioctl interface. This version only has one ioctl (to get the Synaptics-specific config parameters) since this is the only information a user might want. Submitted by: Arne Schwabe <arne -at- rfc2549.org>
2004-07-30 00:59:40 +00:00
y0 = ((pb->ipacket[3] & 0x20) << 7) |
Rewrite Synaptics touchpads support with the following goals in mind: o better quality of the movement smoothing o more features such as tap-hold and virtual scrolling Support must still be enabled with this line in your /boot/loader.conf: hw.psm.synaptics_support="1" The following sysctls were removed: hw.psm.synaptics.low_speed_threshold hw.psm.synaptics.min_movement hw.psm.synaptics.squelch_level An overview of this new driver and a short documentation about the added sysctls is available on the wiki: http://wiki.freebsd.org/SynapticsTouchpad
2008-10-14 17:48:36 +00:00
((pb->ipacket[1] & 0xf0) << 4) |
pb->ipacket[5];
Clean up and fix style(9) nits.
2008-04-08 19:09:45 +00:00
Rewrite Synaptics touchpads support with the following goals in mind: o better quality of the movement smoothing o more features such as tap-hold and virtual scrolling Support must still be enabled with this line in your /boot/loader.conf: hw.psm.synaptics_support="1" The following sysctls were removed: hw.psm.synaptics.low_speed_threshold hw.psm.synaptics.min_movement hw.psm.synaptics.squelch_level An overview of this new driver and a short documentation about the added sysctls is available on the wiki: http://wiki.freebsd.org/SynapticsTouchpad
2008-10-14 17:48:36 +00:00
synaction = &(sc->synaction);
Clean up and fix style(9) nits.
2008-04-08 19:09:45 +00:00
Rewrite Synaptics touchpads support with the following goals in mind: o better quality of the movement smoothing o more features such as tap-hold and virtual scrolling Support must still be enabled with this line in your /boot/loader.conf: hw.psm.synaptics_support="1" The following sysctls were removed: hw.psm.synaptics.low_speed_threshold hw.psm.synaptics.min_movement hw.psm.synaptics.squelch_level An overview of this new driver and a short documentation about the added sysctls is available on the wiki: http://wiki.freebsd.org/SynapticsTouchpad
2008-10-14 17:48:36 +00:00
/*
* If the action is just beginning, init the structure and
* compute tap timeout.
*/
if (!(sc->flags & PSM_FLAGS_FINGERDOWN)) {
VLOG(3, (LOG_DEBUG, "synaptics: ----\n"));
Clean up and fix style(9) nits.
2008-04-08 19:09:45 +00:00
Rewrite Synaptics touchpads support with the following goals in mind: o better quality of the movement smoothing o more features such as tap-hold and virtual scrolling Support must still be enabled with this line in your /boot/loader.conf: hw.psm.synaptics_support="1" The following sysctls were removed: hw.psm.synaptics.low_speed_threshold hw.psm.synaptics.min_movement hw.psm.synaptics.squelch_level An overview of this new driver and a short documentation about the added sysctls is available on the wiki: http://wiki.freebsd.org/SynapticsTouchpad
2008-10-14 17:48:36 +00:00
/* Store the first point of this action. */
synaction->start_x = x0;
synaction->start_y = y0;
dx = dy = 0;
Clean up and fix style(9) nits.
2008-04-08 19:09:45 +00:00
Rewrite Synaptics touchpads support with the following goals in mind: o better quality of the movement smoothing o more features such as tap-hold and virtual scrolling Support must still be enabled with this line in your /boot/loader.conf: hw.psm.synaptics_support="1" The following sysctls were removed: hw.psm.synaptics.low_speed_threshold hw.psm.synaptics.min_movement hw.psm.synaptics.squelch_level An overview of this new driver and a short documentation about the added sysctls is available on the wiki: http://wiki.freebsd.org/SynapticsTouchpad
2008-10-14 17:48:36 +00:00
/* Initialize queue. */
synaction->queue_cursor = SYNAPTICS_PACKETQUEUE;
synaction->queue_len = 0;
synaction->window_min = window_min;
Add support for the Synaptics Touchpad mouse driver. I reworked the submitted version with style cleanups and changes to comments. I also modified the ioctl interface. This version only has one ioctl (to get the Synaptics-specific config parameters) since this is the only information a user might want. Submitted by: Arne Schwabe <arne -at- rfc2549.org>
2004-07-30 00:59:40 +00:00
Rewrite Synaptics touchpads support with the following goals in mind: o better quality of the movement smoothing o more features such as tap-hold and virtual scrolling Support must still be enabled with this line in your /boot/loader.conf: hw.psm.synaptics_support="1" The following sysctls were removed: hw.psm.synaptics.low_speed_threshold hw.psm.synaptics.min_movement hw.psm.synaptics.squelch_level An overview of this new driver and a short documentation about the added sysctls is available on the wiki: http://wiki.freebsd.org/SynapticsTouchpad
2008-10-14 17:48:36 +00:00
/* Reset average. */
synaction->avg_dx = 0;
synaction->avg_dy = 0;
Clean up and fix style(9) nits.
2008-04-08 19:09:45 +00:00
Rewrite Synaptics touchpads support with the following goals in mind: o better quality of the movement smoothing o more features such as tap-hold and virtual scrolling Support must still be enabled with this line in your /boot/loader.conf: hw.psm.synaptics_support="1" The following sysctls were removed: hw.psm.synaptics.low_speed_threshold hw.psm.synaptics.min_movement hw.psm.synaptics.squelch_level An overview of this new driver and a short documentation about the added sysctls is available on the wiki: http://wiki.freebsd.org/SynapticsTouchpad
2008-10-14 17:48:36 +00:00
/* Reset squelch. */
synaction->squelch_x = 0;
synaction->squelch_y = 0;
/* Reset pressure peak. */
sc->zmax = 0;
/* Reset fingers count. */
synaction->fingers_nb = 0;
Clean up and fix style(9) nits.
2008-04-08 19:09:45 +00:00
Rewrite Synaptics touchpads support with the following goals in mind: o better quality of the movement smoothing o more features such as tap-hold and virtual scrolling Support must still be enabled with this line in your /boot/loader.conf: hw.psm.synaptics_support="1" The following sysctls were removed: hw.psm.synaptics.low_speed_threshold hw.psm.synaptics.min_movement hw.psm.synaptics.squelch_level An overview of this new driver and a short documentation about the added sysctls is available on the wiki: http://wiki.freebsd.org/SynapticsTouchpad
2008-10-14 17:48:36 +00:00
/* Reset virtual scrolling state. */
synaction->in_vscroll = 0;
Clean up and fix style(9) nits.
2008-04-08 19:09:45 +00:00
Rewrite Synaptics touchpads support with the following goals in mind: o better quality of the movement smoothing o more features such as tap-hold and virtual scrolling Support must still be enabled with this line in your /boot/loader.conf: hw.psm.synaptics_support="1" The following sysctls were removed: hw.psm.synaptics.low_speed_threshold hw.psm.synaptics.min_movement hw.psm.synaptics.squelch_level An overview of this new driver and a short documentation about the added sysctls is available on the wiki: http://wiki.freebsd.org/SynapticsTouchpad
2008-10-14 17:48:36 +00:00
/* Compute tap timeout. */
sc->taptimeout.tv_sec = tap_timeout / 1000000;
sc->taptimeout.tv_usec = tap_timeout % 1000000;
timevaladd(&sc->taptimeout, &sc->lastsoftintr);
sc->flags |= PSM_FLAGS_FINGERDOWN;
} else {
/* Calculate the current delta. */
cursor = synaction->queue_cursor;
dx = x0 - synaction->queue[cursor].x;
dy = y0 - synaction->queue[cursor].y;
}
/* If in tap-hold, add the recorded button. */
if (synaction->in_taphold)
ms->button |= synaction->tap_button;
/*
* From now on, we can use the SYNAPTICS_END label to skip
* the current packet.
*/
/*
* Limit the coordinates to the specified margins because
* this area isn't very reliable.
*/
if (x0 <= margin_left)
x0 = margin_left;
else if (x0 >= 6143 - margin_right)
x0 = 6143 - margin_right;
if (y0 <= margin_bottom)
y0 = margin_bottom;
else if (y0 >= 6143 - margin_top)
y0 = 6143 - margin_top;
VLOG(3, (LOG_DEBUG, "synaptics: ipacket: [%d, %d], %d, %d\n",
x0, y0, *z, w));
/* Queue this new packet. */
cursor = SYNAPTICS_QUEUE_CURSOR(synaction->queue_cursor - 1);
synaction->queue[cursor].x = x0;
synaction->queue[cursor].y = y0;
synaction->queue_cursor = cursor;
if (synaction->queue_len < SYNAPTICS_PACKETQUEUE)
synaction->queue_len++;
VLOG(5, (LOG_DEBUG,
"synaptics: cursor[%d]: x=%d, y=%d, dx=%d, dy=%d\n",
cursor, x0, y0, dx, dy));
/*
* For tap, we keep the maximum number of fingers and the
* pressure peak. Also with multiple fingers, we increase
* the minimum window.
*/
switch (w) {
case 1: /* Three or more fingers. */
synaction->fingers_nb = imax(3, synaction->fingers_nb);
synaction->window_min = window_max;
break;
case 0: /* Two fingers. */
synaction->fingers_nb = imax(2, synaction->fingers_nb);
synaction->window_min = window_max;
break;
default: /* One finger or undetectable. */
synaction->fingers_nb = imax(1, synaction->fingers_nb);
}
sc->zmax = imax(*z, sc->zmax);
/* Do we have enough packets to consider this a movement? */
if (synaction->queue_len < synaction->window_min)
goto SYNAPTICS_END;
sys/dev: minor spelling fixes. Most affect comments, very few have user-visible effects.
2016-05-03 03:41:25 +00:00
/* Is a scrolling action occurring? */
Rewrite Synaptics touchpads support with the following goals in mind: o better quality of the movement smoothing o more features such as tap-hold and virtual scrolling Support must still be enabled with this line in your /boot/loader.conf: hw.psm.synaptics_support="1" The following sysctls were removed: hw.psm.synaptics.low_speed_threshold hw.psm.synaptics.min_movement hw.psm.synaptics.squelch_level An overview of this new driver and a short documentation about the added sysctls is available on the wiki: http://wiki.freebsd.org/SynapticsTouchpad
2008-10-14 17:48:36 +00:00
if (!synaction->in_taphold && !synaction->in_vscroll) {
Clean up and fix style(9) nits.
2008-04-08 19:09:45 +00:00
/*
Rewrite Synaptics touchpads support with the following goals in mind: o better quality of the movement smoothing o more features such as tap-hold and virtual scrolling Support must still be enabled with this line in your /boot/loader.conf: hw.psm.synaptics_support="1" The following sysctls were removed: hw.psm.synaptics.low_speed_threshold hw.psm.synaptics.min_movement hw.psm.synaptics.squelch_level An overview of this new driver and a short documentation about the added sysctls is available on the wiki: http://wiki.freebsd.org/SynapticsTouchpad
2008-10-14 17:48:36 +00:00
* A scrolling action must not conflict with a tap
* action. Here are the conditions to consider a
* scrolling action:
* - the action in a configurable area
* - one of the following:
* . the distance between the last packet and the
* first should be above a configurable minimum
* . tap timed out
Clean up and fix style(9) nits.
2008-04-08 19:09:45 +00:00
*/
Rewrite Synaptics touchpads support with the following goals in mind: o better quality of the movement smoothing o more features such as tap-hold and virtual scrolling Support must still be enabled with this line in your /boot/loader.conf: hw.psm.synaptics_support="1" The following sysctls were removed: hw.psm.synaptics.low_speed_threshold hw.psm.synaptics.min_movement hw.psm.synaptics.squelch_level An overview of this new driver and a short documentation about the added sysctls is available on the wiki: http://wiki.freebsd.org/SynapticsTouchpad
2008-10-14 17:48:36 +00:00
dxp = abs(synaction->queue[synaction->queue_cursor].x -
synaction->start_x);
dyp = abs(synaction->queue[synaction->queue_cursor].y -
synaction->start_y);
if (timevalcmp(&sc->lastsoftintr, &sc->taptimeout, >) ||
dxp >= sc->syninfo.vscroll_min_delta ||
dyp >= sc->syninfo.vscroll_min_delta) {
Improve Synaptics support for newer touchpads. Enable two finger scrolling by default and disable the edge scrolling if the touchpad has no physical zone for it. Disable directional scrolling by default to avoid using extended buttons as scroll buttons. Add support for ClickPad. On Lenovo laptops, this is the button reported when one presses the touchpad. While there, fix a problem where the extended buttons were not reporting the button release event correctly: we need to save the state of the buttons and report it to sysmouse until we receive a packet from the touchpad indicating the button has been released. This makes it possible to use an extended button to resize a window. On Lenovo laptops, the major buttons are actually reported as extended buttons. Tested by: many (current@) MFC after: 1 week
2015-04-11 18:44:07 +00:00
/*
* Handle two finger scrolling.
* Note that we don't rely on fingers_nb
* as that keeps the maximum number of fingers.
*/
if (two_finger_scroll) {
if (w == 0) {
synaction->in_vscroll +=
dyp ? 2 : 0;
synaction->in_vscroll +=
dxp ? 1 : 0;
}
} else {
/* Check for horizontal scrolling. */
if ((vscroll_hor_area > 0 &&
synaction->start_y <=
vscroll_hor_area) ||
(vscroll_hor_area < 0 &&
synaction->start_y >=
6143 + vscroll_hor_area))
synaction->in_vscroll += 2;
/* Check for vertical scrolling. */
if ((vscroll_ver_area > 0 &&
synaction->start_x <=
vscroll_ver_area) ||
(vscroll_ver_area < 0 &&
synaction->start_x >=
6143 + vscroll_ver_area))
synaction->in_vscroll += 1;
}
Rewrite Synaptics touchpads support with the following goals in mind: o better quality of the movement smoothing o more features such as tap-hold and virtual scrolling Support must still be enabled with this line in your /boot/loader.conf: hw.psm.synaptics_support="1" The following sysctls were removed: hw.psm.synaptics.low_speed_threshold hw.psm.synaptics.min_movement hw.psm.synaptics.squelch_level An overview of this new driver and a short documentation about the added sysctls is available on the wiki: http://wiki.freebsd.org/SynapticsTouchpad
2008-10-14 17:48:36 +00:00
/* Avoid conflicts if area overlaps. */
Improve Synaptics support for newer touchpads. Enable two finger scrolling by default and disable the edge scrolling if the touchpad has no physical zone for it. Disable directional scrolling by default to avoid using extended buttons as scroll buttons. Add support for ClickPad. On Lenovo laptops, this is the button reported when one presses the touchpad. While there, fix a problem where the extended buttons were not reporting the button release event correctly: we need to save the state of the buttons and report it to sysmouse until we receive a packet from the touchpad indicating the button has been released. This makes it possible to use an extended button to resize a window. On Lenovo laptops, the major buttons are actually reported as extended buttons. Tested by: many (current@) MFC after: 1 week
2015-04-11 18:44:07 +00:00
if (synaction->in_vscroll >= 3)
Rewrite Synaptics touchpads support with the following goals in mind: o better quality of the movement smoothing o more features such as tap-hold and virtual scrolling Support must still be enabled with this line in your /boot/loader.conf: hw.psm.synaptics_support="1" The following sysctls were removed: hw.psm.synaptics.low_speed_threshold hw.psm.synaptics.min_movement hw.psm.synaptics.squelch_level An overview of this new driver and a short documentation about the added sysctls is available on the wiki: http://wiki.freebsd.org/SynapticsTouchpad
2008-10-14 17:48:36 +00:00
synaction->in_vscroll =
(dxp > dyp) ? 2 : 1;
}
}
Improve Synaptics support for newer touchpads. Enable two finger scrolling by default and disable the edge scrolling if the touchpad has no physical zone for it. Disable directional scrolling by default to avoid using extended buttons as scroll buttons. Add support for ClickPad. On Lenovo laptops, this is the button reported when one presses the touchpad. While there, fix a problem where the extended buttons were not reporting the button release event correctly: we need to save the state of the buttons and report it to sysmouse until we receive a packet from the touchpad indicating the button has been released. This makes it possible to use an extended button to resize a window. On Lenovo laptops, the major buttons are actually reported as extended buttons. Tested by: many (current@) MFC after: 1 week
2015-04-11 18:44:07 +00:00
/*
* Reset two finger scrolling when the number of fingers
* is different from two.
*/
When exiting two-finger scroll the Synaptics device may report a jump in absolute position. This seems to be correlated with only removing a single finger. To work around this report no movement on from the first packet when the user exits scrolling.
2015-12-14 11:13:50 +00:00
if (two_finger_scroll && w != 0 && synaction->in_vscroll != 0) {
Improve Synaptics support for newer touchpads. Enable two finger scrolling by default and disable the edge scrolling if the touchpad has no physical zone for it. Disable directional scrolling by default to avoid using extended buttons as scroll buttons. Add support for ClickPad. On Lenovo laptops, this is the button reported when one presses the touchpad. While there, fix a problem where the extended buttons were not reporting the button release event correctly: we need to save the state of the buttons and report it to sysmouse until we receive a packet from the touchpad indicating the button has been released. This makes it possible to use an extended button to resize a window. On Lenovo laptops, the major buttons are actually reported as extended buttons. Tested by: many (current@) MFC after: 1 week
2015-04-11 18:44:07 +00:00
synaction->in_vscroll = 0;
When exiting two-finger scroll the Synaptics device may report a jump in absolute position. This seems to be correlated with only removing a single finger. To work around this report no movement on from the first packet when the user exits scrolling.
2015-12-14 11:13:50 +00:00
exiting_scroll = 1;
}
Improve Synaptics support for newer touchpads. Enable two finger scrolling by default and disable the edge scrolling if the touchpad has no physical zone for it. Disable directional scrolling by default to avoid using extended buttons as scroll buttons. Add support for ClickPad. On Lenovo laptops, this is the button reported when one presses the touchpad. While there, fix a problem where the extended buttons were not reporting the button release event correctly: we need to save the state of the buttons and report it to sysmouse until we receive a packet from the touchpad indicating the button has been released. This makes it possible to use an extended button to resize a window. On Lenovo laptops, the major buttons are actually reported as extended buttons. Tested by: many (current@) MFC after: 1 week
2015-04-11 18:44:07 +00:00
VLOG(5, (LOG_DEBUG,
"synaptics: virtual scrolling: %s "
"(direction=%d, dxp=%d, dyp=%d, fingers=%d)\n",
synaction->in_vscroll ? "YES" : "NO",
synaction->in_vscroll, dxp, dyp,
synaction->fingers_nb));
Rewrite Synaptics touchpads support with the following goals in mind: o better quality of the movement smoothing o more features such as tap-hold and virtual scrolling Support must still be enabled with this line in your /boot/loader.conf: hw.psm.synaptics_support="1" The following sysctls were removed: hw.psm.synaptics.low_speed_threshold hw.psm.synaptics.min_movement hw.psm.synaptics.squelch_level An overview of this new driver and a short documentation about the added sysctls is available on the wiki: http://wiki.freebsd.org/SynapticsTouchpad
2008-10-14 17:48:36 +00:00
weight_prev_x = weight_prev_y = weight_previous;
div_max_x = div_max_y = div_max;
Make life for owners of Synaptics Touchpads more pleasant :-) o Implement a shiny new algorithm to keep track of finger movement at slow speeds. This dramatically reduces the level of questionable language from users trying to resize windows. o Properly catch the many extra buttons and dials which manufacturers are known to screw onto Synaptics touchpad controllers. Currently, up to seven buttons are known to work, more should work too. o Add a number of sysctls allowing one to tune the driver to taste in a simple way: # Should the extra buttons act as axes or as middle button hw.psm.synaptics.directional_scrolls # These control the 'stickiness' at low speeds hw.psm.synaptics.low_speed_threshold hw.psm.synaptics.min_movement hw.psm.synaptics.squelch_level PR: kern/75725 Submitted by: Jason Kuri <jay@oneway.com> MFC after: 1 month
2005-01-10 13:05:58 +00:00
Rewrite Synaptics touchpads support with the following goals in mind: o better quality of the movement smoothing o more features such as tap-hold and virtual scrolling Support must still be enabled with this line in your /boot/loader.conf: hw.psm.synaptics_support="1" The following sysctls were removed: hw.psm.synaptics.low_speed_threshold hw.psm.synaptics.min_movement hw.psm.synaptics.squelch_level An overview of this new driver and a short documentation about the added sysctls is available on the wiki: http://wiki.freebsd.org/SynapticsTouchpad
2008-10-14 17:48:36 +00:00
if (synaction->in_vscroll) {
/* Dividers are different with virtual scrolling. */
div_min = sc->syninfo.vscroll_div_min;
div_max_x = div_max_y = sc->syninfo.vscroll_div_max;
} else {
Clean up and fix style(9) nits.
2008-04-08 19:09:45 +00:00
/*
Rewrite Synaptics touchpads support with the following goals in mind: o better quality of the movement smoothing o more features such as tap-hold and virtual scrolling Support must still be enabled with this line in your /boot/loader.conf: hw.psm.synaptics_support="1" The following sysctls were removed: hw.psm.synaptics.low_speed_threshold hw.psm.synaptics.min_movement hw.psm.synaptics.squelch_level An overview of this new driver and a short documentation about the added sysctls is available on the wiki: http://wiki.freebsd.org/SynapticsTouchpad
2008-10-14 17:48:36 +00:00
* There's a lot of noise in coordinates when
* the finger is on the touchpad's borders. When
* using this area, we apply a special weight and
* div.
Clean up and fix style(9) nits.
2008-04-08 19:09:45 +00:00
*/
Rewrite Synaptics touchpads support with the following goals in mind: o better quality of the movement smoothing o more features such as tap-hold and virtual scrolling Support must still be enabled with this line in your /boot/loader.conf: hw.psm.synaptics_support="1" The following sysctls were removed: hw.psm.synaptics.low_speed_threshold hw.psm.synaptics.min_movement hw.psm.synaptics.squelch_level An overview of this new driver and a short documentation about the added sysctls is available on the wiki: http://wiki.freebsd.org/SynapticsTouchpad
2008-10-14 17:48:36 +00:00
if (x0 <= na_left || x0 >= 6143 - na_right) {
weight_prev_x = sc->syninfo.weight_previous_na;
div_max_x = sc->syninfo.div_max_na;
}
Clean up and fix style(9) nits.
2008-04-08 19:09:45 +00:00
Rewrite Synaptics touchpads support with the following goals in mind: o better quality of the movement smoothing o more features such as tap-hold and virtual scrolling Support must still be enabled with this line in your /boot/loader.conf: hw.psm.synaptics_support="1" The following sysctls were removed: hw.psm.synaptics.low_speed_threshold hw.psm.synaptics.min_movement hw.psm.synaptics.squelch_level An overview of this new driver and a short documentation about the added sysctls is available on the wiki: http://wiki.freebsd.org/SynapticsTouchpad
2008-10-14 17:48:36 +00:00
if (y0 <= na_bottom || y0 >= 6143 - na_top) {
weight_prev_y = sc->syninfo.weight_previous_na;
div_max_y = sc->syninfo.div_max_na;
Clean up and fix style(9) nits.
2008-04-08 19:09:45 +00:00
}
Rewrite Synaptics touchpads support with the following goals in mind: o better quality of the movement smoothing o more features such as tap-hold and virtual scrolling Support must still be enabled with this line in your /boot/loader.conf: hw.psm.synaptics_support="1" The following sysctls were removed: hw.psm.synaptics.low_speed_threshold hw.psm.synaptics.min_movement hw.psm.synaptics.squelch_level An overview of this new driver and a short documentation about the added sysctls is available on the wiki: http://wiki.freebsd.org/SynapticsTouchpad
2008-10-14 17:48:36 +00:00
}
Add support for the Synaptics Touchpad mouse driver. I reworked the submitted version with style cleanups and changes to comments. I also modified the ioctl interface. This version only has one ioctl (to get the Synaptics-specific config parameters) since this is the only information a user might want. Submitted by: Arne Schwabe <arne -at- rfc2549.org>
2004-07-30 00:59:40 +00:00
Clean up and fix style(9) nits.
2008-04-08 19:09:45 +00:00
/*
Rewrite Synaptics touchpads support with the following goals in mind: o better quality of the movement smoothing o more features such as tap-hold and virtual scrolling Support must still be enabled with this line in your /boot/loader.conf: hw.psm.synaptics_support="1" The following sysctls were removed: hw.psm.synaptics.low_speed_threshold hw.psm.synaptics.min_movement hw.psm.synaptics.squelch_level An overview of this new driver and a short documentation about the added sysctls is available on the wiki: http://wiki.freebsd.org/SynapticsTouchpad
2008-10-14 17:48:36 +00:00
* Calculate weights for the average operands and
* the divisor. Both depend on the distance between
* the current packet and a previous one (based on the
* window width).
Make life for owners of Synaptics Touchpads more pleasant :-) o Implement a shiny new algorithm to keep track of finger movement at slow speeds. This dramatically reduces the level of questionable language from users trying to resize windows. o Properly catch the many extra buttons and dials which manufacturers are known to screw onto Synaptics touchpad controllers. Currently, up to seven buttons are known to work, more should work too. o Add a number of sysctls allowing one to tune the driver to taste in a simple way: # Should the extra buttons act as axes or as middle button hw.psm.synaptics.directional_scrolls # These control the 'stickiness' at low speeds hw.psm.synaptics.low_speed_threshold hw.psm.synaptics.min_movement hw.psm.synaptics.squelch_level PR: kern/75725 Submitted by: Jason Kuri <jay@oneway.com> MFC after: 1 month
2005-01-10 13:05:58 +00:00
*/
Rewrite Synaptics touchpads support with the following goals in mind: o better quality of the movement smoothing o more features such as tap-hold and virtual scrolling Support must still be enabled with this line in your /boot/loader.conf: hw.psm.synaptics_support="1" The following sysctls were removed: hw.psm.synaptics.low_speed_threshold hw.psm.synaptics.min_movement hw.psm.synaptics.squelch_level An overview of this new driver and a short documentation about the added sysctls is available on the wiki: http://wiki.freebsd.org/SynapticsTouchpad
2008-10-14 17:48:36 +00:00
window = imin(synaction->queue_len, window_max);
peer = SYNAPTICS_QUEUE_CURSOR(cursor + window - 1);
dxp = abs(x0 - synaction->queue[peer].x) + 1;
dyp = abs(y0 - synaction->queue[peer].y) + 1;
len = (dxp * dxp) + (dyp * dyp);
weight_prev_x = imin(weight_prev_x,
weight_len_squared * weight_prev_x / len);
weight_prev_y = imin(weight_prev_y,
weight_len_squared * weight_prev_y / len);
len = (dxp + dyp) / 2;
div_x = div_len * div_max_x / len;
div_x = imin(div_max_x, div_x);
div_x = imax(div_min, div_x);
div_y = div_len * div_max_y / len;
div_y = imin(div_max_y, div_y);
div_y = imax(div_min, div_y);
VLOG(3, (LOG_DEBUG,
"synaptics: peer=%d, len=%d, weight=%d/%d, div=%d/%d\n",
peer, len, weight_prev_x, weight_prev_y, div_x, div_y));
/* Compute averages. */
synaction->avg_dx =
(weight_current * dx * multiplicator +
weight_prev_x * synaction->avg_dx) /
(weight_current + weight_prev_x);
synaction->avg_dy =
(weight_current * dy * multiplicator +
weight_prev_y * synaction->avg_dy) /
(weight_current + weight_prev_y);
VLOG(5, (LOG_DEBUG,
"synaptics: avg_dx~=%d, avg_dy~=%d\n",
synaction->avg_dx / multiplicator,
synaction->avg_dy / multiplicator));
/* Use these averages to calculate x & y. */
synaction->squelch_x += synaction->avg_dx;
*x = synaction->squelch_x / (div_x * multiplicator);
synaction->squelch_x = synaction->squelch_x %
(div_x * multiplicator);
synaction->squelch_y += synaction->avg_dy;
*y = synaction->squelch_y / (div_y * multiplicator);
synaction->squelch_y = synaction->squelch_y %
(div_y * multiplicator);
if (synaction->in_vscroll) {
switch(synaction->in_vscroll) {
case 1: /* Vertical scrolling. */
if (*y != 0)
ms->button |= (*y > 0) ?
MOUSE_BUTTON4DOWN :
MOUSE_BUTTON5DOWN;
break;
case 2: /* Horizontal scrolling. */
if (*x != 0)
ms->button |= (*x > 0) ?
MOUSE_BUTTON7DOWN :
MOUSE_BUTTON6DOWN;
break;
}
/* The pointer is not moved. */
*x = *y = 0;
} else {
When exiting two-finger scroll the Synaptics device may report a jump in absolute position. This seems to be correlated with only removing a single finger. To work around this report no movement on from the first packet when the user exits scrolling.
2015-12-14 11:13:50 +00:00
/* On exit the x/y pos may jump, ignore this */
if (exiting_scroll)
*x = *y = 0;
Rewrite Synaptics touchpads support with the following goals in mind: o better quality of the movement smoothing o more features such as tap-hold and virtual scrolling Support must still be enabled with this line in your /boot/loader.conf: hw.psm.synaptics_support="1" The following sysctls were removed: hw.psm.synaptics.low_speed_threshold hw.psm.synaptics.min_movement hw.psm.synaptics.squelch_level An overview of this new driver and a short documentation about the added sysctls is available on the wiki: http://wiki.freebsd.org/SynapticsTouchpad
2008-10-14 17:48:36 +00:00
VLOG(3, (LOG_DEBUG, "synaptics: [%d, %d] -> [%d, %d]\n",
dx, dy, *x, *y));
}
} else if (sc->flags & PSM_FLAGS_FINGERDOWN) {
/*
* An action is currently taking place but the pressure
* dropped under the minimum, putting an end to it.
*/
synapticsaction_t *synaction;
int taphold_timeout, dx, dy, tap_max_delta;
synaction = &(sc->synaction);
dx = abs(synaction->queue[synaction->queue_cursor].x -
synaction->start_x);
dy = abs(synaction->queue[synaction->queue_cursor].y -
synaction->start_y);
/* Max delta is disabled for multi-fingers tap. */
if (synaction->fingers_nb > 1)
tap_max_delta = imax(dx, dy);
else
tap_max_delta = sc->syninfo.tap_max_delta;
Make life for owners of Synaptics Touchpads more pleasant :-) o Implement a shiny new algorithm to keep track of finger movement at slow speeds. This dramatically reduces the level of questionable language from users trying to resize windows. o Properly catch the many extra buttons and dials which manufacturers are known to screw onto Synaptics touchpad controllers. Currently, up to seven buttons are known to work, more should work too. o Add a number of sysctls allowing one to tune the driver to taste in a simple way: # Should the extra buttons act as axes or as middle button hw.psm.synaptics.directional_scrolls # These control the 'stickiness' at low speeds hw.psm.synaptics.low_speed_threshold hw.psm.synaptics.min_movement hw.psm.synaptics.squelch_level PR: kern/75725 Submitted by: Jason Kuri <jay@oneway.com> MFC after: 1 month
2005-01-10 13:05:58 +00:00
Add support for the Synaptics Touchpad mouse driver. I reworked the submitted version with style cleanups and changes to comments. I also modified the ioctl interface. This version only has one ioctl (to get the Synaptics-specific config parameters) since this is the only information a user might want. Submitted by: Arne Schwabe <arne -at- rfc2549.org>
2004-07-30 00:59:40 +00:00
sc->flags &= ~PSM_FLAGS_FINGERDOWN;
Update support for Synaptics Touchpads (Volume III) o Catch 'taps' as button presses o One finger sends button1, two fingers send button3, three fingers send button2 (double-click) Tested by: many subscribers to -current Approved by: njl
2004-08-08 01:00:31 +00:00
Rewrite Synaptics touchpads support with the following goals in mind: o better quality of the movement smoothing o more features such as tap-hold and virtual scrolling Support must still be enabled with this line in your /boot/loader.conf: hw.psm.synaptics_support="1" The following sysctls were removed: hw.psm.synaptics.low_speed_threshold hw.psm.synaptics.min_movement hw.psm.synaptics.squelch_level An overview of this new driver and a short documentation about the added sysctls is available on the wiki: http://wiki.freebsd.org/SynapticsTouchpad
2008-10-14 17:48:36 +00:00
/* Check for tap. */
VLOG(3, (LOG_DEBUG,
"synaptics: zmax=%d, dx=%d, dy=%d, "
"delta=%d, fingers=%d, queue=%d\n",
sc->zmax, dx, dy, tap_max_delta, synaction->fingers_nb,
synaction->queue_len));
if (!synaction->in_vscroll && sc->zmax >= tap_threshold &&
timevalcmp(&sc->lastsoftintr, &sc->taptimeout, <=) &&
dx <= tap_max_delta && dy <= tap_max_delta &&
synaction->queue_len >= sc->syninfo.tap_min_queue) {
/*
* We have a tap if:
* - the maximum pressure went over tap_threshold
* - the action ended before tap_timeout
*
* To handle tap-hold, we must delay any button push to
* the next action.
*/
if (synaction->in_taphold) {
/*
* This is the second and last tap of a
* double tap action, not a tap-hold.
*/
synaction->in_taphold = 0;
Update support for Synaptics Touchpads (Volume III) o Catch 'taps' as button presses o One finger sends button1, two fingers send button3, three fingers send button2 (double-click) Tested by: many subscribers to -current Approved by: njl
2004-08-08 01:00:31 +00:00
Rewrite Synaptics touchpads support with the following goals in mind: o better quality of the movement smoothing o more features such as tap-hold and virtual scrolling Support must still be enabled with this line in your /boot/loader.conf: hw.psm.synaptics_support="1" The following sysctls were removed: hw.psm.synaptics.low_speed_threshold hw.psm.synaptics.min_movement hw.psm.synaptics.squelch_level An overview of this new driver and a short documentation about the added sysctls is available on the wiki: http://wiki.freebsd.org/SynapticsTouchpad
2008-10-14 17:48:36 +00:00
/*
* For double-tap to work:
* - no button press is emitted (to
* simulate a button release)
* - PSM_FLAGS_FINGERDOWN is set to
* force the next packet to emit a
* button press)
*/
VLOG(2, (LOG_DEBUG,
"synaptics: button RELEASE: %d\n",
synaction->tap_button));
sc->flags |= PSM_FLAGS_FINGERDOWN;
} else {
/*
* This is the first tap: we set the
* tap-hold state and notify the button
* down event.
*/
synaction->in_taphold = 1;
taphold_timeout = sc->syninfo.taphold_timeout;
sc->taptimeout.tv_sec = taphold_timeout /
1000000;
sc->taptimeout.tv_usec = taphold_timeout %
1000000;
timevaladd(&sc->taptimeout, &sc->lastsoftintr);
switch (synaction->fingers_nb) {
case 3:
synaction->tap_button =
MOUSE_BUTTON2DOWN;
break;
case 2:
synaction->tap_button =
MOUSE_BUTTON3DOWN;
break;
default:
synaction->tap_button =
MOUSE_BUTTON1DOWN;
}
VLOG(2, (LOG_DEBUG,
"synaptics: button PRESS: %d\n",
synaction->tap_button));
ms->button |= synaction->tap_button;
}
} else {
/*
* Not enough pressure or timeout: reset
* tap-hold state.
*/
if (synaction->in_taphold) {
VLOG(2, (LOG_DEBUG,
"synaptics: button RELEASE: %d\n",
synaction->tap_button));
synaction->in_taphold = 0;
} else {
VLOG(2, (LOG_DEBUG,
"synaptics: not a tap-hold\n"));
}
}
} else if (!(sc->flags & PSM_FLAGS_FINGERDOWN) &&
sc->synaction.in_taphold) {
/*
* For a tap-hold to work, the button must remain down at
* least until timeout (where the in_taphold flags will be
* cleared) or during the next action.
*/
if (timevalcmp(&sc->lastsoftintr, &sc->taptimeout, <=)) {
ms->button |= sc->synaction.tap_button;
} else {
VLOG(2, (LOG_DEBUG,
"synaptics: button RELEASE: %d\n",
sc->synaction.tap_button));
sc->synaction.in_taphold = 0;
}
Clean up and fix style(9) nits.
2008-04-08 19:09:45 +00:00
}
Rewrite Synaptics touchpads support with the following goals in mind: o better quality of the movement smoothing o more features such as tap-hold and virtual scrolling Support must still be enabled with this line in your /boot/loader.conf: hw.psm.synaptics_support="1" The following sysctls were removed: hw.psm.synaptics.low_speed_threshold hw.psm.synaptics.min_movement hw.psm.synaptics.squelch_level An overview of this new driver and a short documentation about the added sysctls is available on the wiki: http://wiki.freebsd.org/SynapticsTouchpad
2008-10-14 17:48:36 +00:00
SYNAPTICS_END:
/*
* Use the extra buttons as a scrollwheel
*
* XXX X.Org uses the Z axis for vertical wheel only,
* whereas moused(8) understands special values to differ
* vertical and horizontal wheels.
*
* xf86-input-mouse needs therefore a small patch to
* understand these special values. Without it, the
* horizontal wheel acts as a vertical wheel in X.Org.
*
* That's why the horizontal wheel is disabled by
* default for now.
*/
Improve Synaptics support for newer touchpads. Enable two finger scrolling by default and disable the edge scrolling if the touchpad has no physical zone for it. Disable directional scrolling by default to avoid using extended buttons as scroll buttons. Add support for ClickPad. On Lenovo laptops, this is the button reported when one presses the touchpad. While there, fix a problem where the extended buttons were not reporting the button release event correctly: we need to save the state of the buttons and report it to sysmouse until we receive a packet from the touchpad indicating the button has been released. This makes it possible to use an extended button to resize a window. On Lenovo laptops, the major buttons are actually reported as extended buttons. Tested by: many (current@) MFC after: 1 week
2015-04-11 18:44:07 +00:00
Rewrite Synaptics touchpads support with the following goals in mind: o better quality of the movement smoothing o more features such as tap-hold and virtual scrolling Support must still be enabled with this line in your /boot/loader.conf: hw.psm.synaptics_support="1" The following sysctls were removed: hw.psm.synaptics.low_speed_threshold hw.psm.synaptics.min_movement hw.psm.synaptics.squelch_level An overview of this new driver and a short documentation about the added sysctls is available on the wiki: http://wiki.freebsd.org/SynapticsTouchpad
2008-10-14 17:48:36 +00:00
if (ms->button & MOUSE_BUTTON4DOWN) {
Clean up and fix style(9) nits.
2008-04-08 19:09:45 +00:00
*z = -1;
Rewrite Synaptics touchpads support with the following goals in mind: o better quality of the movement smoothing o more features such as tap-hold and virtual scrolling Support must still be enabled with this line in your /boot/loader.conf: hw.psm.synaptics_support="1" The following sysctls were removed: hw.psm.synaptics.low_speed_threshold hw.psm.synaptics.min_movement hw.psm.synaptics.squelch_level An overview of this new driver and a short documentation about the added sysctls is available on the wiki: http://wiki.freebsd.org/SynapticsTouchpad
2008-10-14 17:48:36 +00:00
ms->button &= ~MOUSE_BUTTON4DOWN;
} else if (ms->button & MOUSE_BUTTON5DOWN) {
Clean up and fix style(9) nits.
2008-04-08 19:09:45 +00:00
*z = 1;
Rewrite Synaptics touchpads support with the following goals in mind: o better quality of the movement smoothing o more features such as tap-hold and virtual scrolling Support must still be enabled with this line in your /boot/loader.conf: hw.psm.synaptics_support="1" The following sysctls were removed: hw.psm.synaptics.low_speed_threshold hw.psm.synaptics.min_movement hw.psm.synaptics.squelch_level An overview of this new driver and a short documentation about the added sysctls is available on the wiki: http://wiki.freebsd.org/SynapticsTouchpad
2008-10-14 17:48:36 +00:00
ms->button &= ~MOUSE_BUTTON5DOWN;
} else if (ms->button & MOUSE_BUTTON6DOWN) {
*z = -2;
ms->button &= ~MOUSE_BUTTON6DOWN;
} else if (ms->button & MOUSE_BUTTON7DOWN) {
*z = 2;
ms->button &= ~MOUSE_BUTTON7DOWN;
} else
Clean up and fix style(9) nits.
2008-04-08 19:09:45 +00:00
*z = 0;
return (0);
}
static void
proc_versapad(struct psm_softc *sc, packetbuf_t *pb, mousestatus_t *ms,
int *x, int *y, int *z)
{
static int butmap_versapad[8] = {
0,
MOUSE_BUTTON3DOWN,
0,
MOUSE_BUTTON3DOWN,
MOUSE_BUTTON1DOWN,
MOUSE_BUTTON1DOWN | MOUSE_BUTTON3DOWN,
MOUSE_BUTTON1DOWN,
MOUSE_BUTTON1DOWN | MOUSE_BUTTON3DOWN
};
int c, x0, y0;
/* VersaPad PS/2 absolute mode message format
*
* [packet1] 7 6 5 4 3 2 1 0(LSB)
* ipacket[0]: 1 1 0 A 1 L T R
* ipacket[1]: H7 H6 H5 H4 H3 H2 H1 H0
* ipacket[2]: V7 V6 V5 V4 V3 V2 V1 V0
* ipacket[3]: 1 1 1 A 1 L T R
* ipacket[4]:V11 V10 V9 V8 H11 H10 H9 H8
* ipacket[5]: 0 P6 P5 P4 P3 P2 P1 P0
*
* [note]
* R: right physical mouse button (1=on)
* T: touch pad virtual button (1=tapping)
* L: left physical mouse button (1=on)
* A: position data is valid (1=valid)
* H: horizontal data (12bit signed integer. H11 is sign bit.)
* V: vertical data (12bit signed integer. V11 is sign bit.)
* P: pressure data
*
* Tapping is mapped to MOUSE_BUTTON4.
*/
c = pb->ipacket[0];
*x = *y = 0;
ms->button = butmap_versapad[c & MOUSE_PS2VERSA_BUTTONS];
ms->button |= (c & MOUSE_PS2VERSA_TAP) ? MOUSE_BUTTON4DOWN : 0;
if (c & MOUSE_PS2VERSA_IN_USE) {
x0 = pb->ipacket[1] | (((pb->ipacket[4]) & 0x0f) << 8);
y0 = pb->ipacket[2] | (((pb->ipacket[4]) & 0xf0) << 4);
if (x0 & 0x800)
x0 -= 0x1000;
if (y0 & 0x800)
y0 -= 0x1000;
if (sc->flags & PSM_FLAGS_FINGERDOWN) {
*x = sc->xold - x0;
*y = y0 - sc->yold;
if (*x < 0) /* XXX */
++*x;
else if (*x)
--*x;
if (*y < 0)
++*y;
else if (*y)
--*y;
} else
sc->flags |= PSM_FLAGS_FINGERDOWN;
sc->xold = x0;
sc->yold = y0;
} else
sc->flags &= ~PSM_FLAGS_FINGERDOWN;
}
static void
psmsoftintr(void *arg)
{
/*
* the table to turn PS/2 mouse button bits (MOUSE_PS2_BUTTON?DOWN)
* into `mousestatus' button bits (MOUSE_BUTTON?DOWN).
*/
static int butmap[8] = {
0,
MOUSE_BUTTON1DOWN,
MOUSE_BUTTON3DOWN,
MOUSE_BUTTON1DOWN | MOUSE_BUTTON3DOWN,
MOUSE_BUTTON2DOWN,
MOUSE_BUTTON1DOWN | MOUSE_BUTTON2DOWN,
MOUSE_BUTTON2DOWN | MOUSE_BUTTON3DOWN,
MOUSE_BUTTON1DOWN | MOUSE_BUTTON2DOWN | MOUSE_BUTTON3DOWN
};
Let psm(4) use si_drv1 to refer to its softc.
2010-09-09 07:52:15 +00:00
struct psm_softc *sc = arg;
Clean up and fix style(9) nits.
2008-04-08 19:09:45 +00:00
mousestatus_t ms;
packetbuf_t *pb;
int x, y, z, c, l, s;
getmicrouptime(&sc->lastsoftintr);
s = spltty();
do {
pb = &sc->pqueue[sc->pqueue_start];
if (sc->mode.level == PSM_LEVEL_NATIVE)
goto next_native;
c = pb->ipacket[0];
/*
* A kludge for Kensington device!
* The MSB of the horizontal count appears to be stored in
* a strange place.
*/
if (sc->hw.model == MOUSE_MODEL_THINK)
pb->ipacket[1] |= (c & MOUSE_PS2_XOVERFLOW) ? 0x80 : 0;
/* ignore the overflow bits... */
x = (c & MOUSE_PS2_XNEG) ?
pb->ipacket[1] - 256 : pb->ipacket[1];
y = (c & MOUSE_PS2_YNEG) ?
pb->ipacket[2] - 256 : pb->ipacket[2];
Update support for Synaptics Touchpads (Volume II) o Handle the 'up/down' buttons some touchpads have as a z-axis (scrollwheel) as recommended by the specs o Report the buttons as button4 and button5 instead of button2 and button4, button2 can be emulated by pressing button1 and button3 simultaneously. This allows one to use the two extra buttons for other purposes if one so desires. Tested by: many subscribers to -current Approved by: njl
2004-08-08 00:57:07 +00:00
z = 0;
Clean up and fix style(9) nits.
2008-04-08 19:09:45 +00:00
ms.obutton = sc->button; /* previous button state */
ms.button = butmap[c & MOUSE_PS2_BUTTONS];
/* `tapping' action */
if (sc->config & PSM_CONFIG_FORCETAP)
ms.button |= ((c & MOUSE_PS2_TAP)) ?
0 : MOUSE_BUTTON4DOWN;
switch (sc->hw.model) {
case MOUSE_MODEL_EXPLORER:
/*
* b7 b6 b5 b4 b3 b2 b1 b0
* byte 1: oy ox sy sx 1 M R L
* byte 2: x x x x x x x x
* byte 3: y y y y y y y y
* byte 4: * * S2 S1 s d2 d1 d0
*
* L, M, R, S1, S2: left, middle, right and side buttons
* s: wheel data sign bit
* d2-d0: wheel data
*/
z = (pb->ipacket[3] & MOUSE_EXPLORER_ZNEG) ?
(pb->ipacket[3] & 0x0f) - 16 :
(pb->ipacket[3] & 0x0f);
ms.button |=
(pb->ipacket[3] & MOUSE_EXPLORER_BUTTON4DOWN) ?
MOUSE_BUTTON4DOWN : 0;
ms.button |=
(pb->ipacket[3] & MOUSE_EXPLORER_BUTTON5DOWN) ?
MOUSE_BUTTON5DOWN : 0;
break;
case MOUSE_MODEL_INTELLI:
case MOUSE_MODEL_NET:
/* wheel data is in the fourth byte */
z = (char)pb->ipacket[3];
/*
* XXX some mice may send 7 when there is no Z movement? */
if ((z >= 7) || (z <= -7))
z = 0;
/* some compatible mice have additional buttons */
ms.button |= (c & MOUSE_PS2INTELLI_BUTTON4DOWN) ?
MOUSE_BUTTON4DOWN : 0;
ms.button |= (c & MOUSE_PS2INTELLI_BUTTON5DOWN) ?
MOUSE_BUTTON5DOWN : 0;
break;
case MOUSE_MODEL_MOUSEMANPLUS:
proc_mmanplus(sc, pb, &ms, &x, &y, &z);
break;
case MOUSE_MODEL_GLIDEPOINT:
/* `tapping' action */
ms.button |= ((c & MOUSE_PS2_TAP)) ? 0 :
MOUSE_BUTTON4DOWN;
break;
case MOUSE_MODEL_NETSCROLL:
/*
sys/dev: minor spelling fixes. Most affect comments, very few have user-visible effects.
2016-05-03 03:41:25 +00:00
* three additional bytes encode buttons and
Clean up and fix style(9) nits.
2008-04-08 19:09:45 +00:00
* wheel events
*/
ms.button |= (pb->ipacket[3] & MOUSE_PS2_BUTTON3DOWN) ?
MOUSE_BUTTON4DOWN : 0;
ms.button |= (pb->ipacket[3] & MOUSE_PS2_BUTTON1DOWN) ?
MOUSE_BUTTON5DOWN : 0;
z = (pb->ipacket[3] & MOUSE_PS2_XNEG) ?
pb->ipacket[4] - 256 : pb->ipacket[4];
break;
case MOUSE_MODEL_THINK:
/* the fourth button state in the first byte */
ms.button |= (c & MOUSE_PS2_TAP) ?
MOUSE_BUTTON4DOWN : 0;
break;
case MOUSE_MODEL_VERSAPAD:
proc_versapad(sc, pb, &ms, &x, &y, &z);
c = ((x < 0) ? MOUSE_PS2_XNEG : 0) |
((y < 0) ? MOUSE_PS2_YNEG : 0);
break;
Improve Synaptics support for newer touchpads. Enable two finger scrolling by default and disable the edge scrolling if the touchpad has no physical zone for it. Disable directional scrolling by default to avoid using extended buttons as scroll buttons. Add support for ClickPad. On Lenovo laptops, this is the button reported when one presses the touchpad. While there, fix a problem where the extended buttons were not reporting the button release event correctly: we need to save the state of the buttons and report it to sysmouse until we receive a packet from the touchpad indicating the button has been released. This makes it possible to use an extended button to resize a window. On Lenovo laptops, the major buttons are actually reported as extended buttons. Tested by: many (current@) MFC after: 1 week
2015-04-11 18:44:07 +00:00
Clean up and fix style(9) nits.
2008-04-08 19:09:45 +00:00
case MOUSE_MODEL_4D:
/*
* b7 b6 b5 b4 b3 b2 b1 b0
* byte 1: s2 d2 s1 d1 1 M R L
* byte 2: sx x x x x x x x
* byte 3: sy y y y y y y y
*
* s1: wheel 1 direction
* d1: wheel 1 data
* s2: wheel 2 direction
* d2: wheel 2 data
*/
x = (pb->ipacket[1] & 0x80) ?
pb->ipacket[1] - 256 : pb->ipacket[1];
y = (pb->ipacket[2] & 0x80) ?
pb->ipacket[2] - 256 : pb->ipacket[2];
switch (c & MOUSE_4D_WHEELBITS) {
case 0x10:
z = 1;
break;
case 0x30:
z = -1;
break;
case 0x40: /* XXX 2nd wheel turning right */
z = 2;
break;
case 0xc0: /* XXX 2nd wheel turning left */
z = -2;
break;
}
break;
case MOUSE_MODEL_4DPLUS:
if ((x < 16 - 256) && (y < 16 - 256)) {
/*
* b7 b6 b5 b4 b3 b2 b1 b0
* byte 1: 0 0 1 1 1 M R L
* byte 2: 0 0 0 0 1 0 0 0
* byte 3: 0 0 0 0 S s d1 d0
*
* L, M, R, S: left, middle, right,
* and side buttons
* s: wheel data sign bit
* d1-d0: wheel data
*/
x = y = 0;
if (pb->ipacket[2] & MOUSE_4DPLUS_BUTTON4DOWN)
ms.button |= MOUSE_BUTTON4DOWN;
z = (pb->ipacket[2] & MOUSE_4DPLUS_ZNEG) ?
((pb->ipacket[2] & 0x07) - 8) :
(pb->ipacket[2] & 0x07) ;
} else {
/* preserve previous button states */
ms.button |= ms.obutton & MOUSE_EXTBUTTONS;
}
break;
case MOUSE_MODEL_SYNAPTICS:
if (proc_synaptics(sc, pb, &ms, &x, &y, &z) != 0)
goto next;
break;
Add preliminary support for IBM/Lenovo TrackPoint. PR: kern/147237 (based on the initial patch for 8.x) Tested by: glebius (device detection and suspend/resume) MFC after: 1 month
2013-03-18 23:22:47 +00:00
case MOUSE_MODEL_TRACKPOINT:
Clean up and fix style(9) nits.
2008-04-08 19:09:45 +00:00
case MOUSE_MODEL_GENERIC:
default:
break;
}
Update support for Synaptics Touchpads (Volume II) o Handle the 'up/down' buttons some touchpads have as a z-axis (scrollwheel) as recommended by the specs o Report the buttons as button4 and button5 instead of button2 and button4, button2 can be emulated by pressing button1 and button3 simultaneously. This allows one to use the two extra buttons for other purposes if one so desires. Tested by: many subscribers to -current Approved by: njl
2004-08-08 00:57:07 +00:00
Clean up and fix style(9) nits.
2008-04-08 19:09:45 +00:00
/* scale values */
if (sc->mode.accelfactor >= 1) {
if (x != 0) {
x = x * x / sc->mode.accelfactor;
if (x == 0)
x = 1;
if (c & MOUSE_PS2_XNEG)
x = -x;
}
if (y != 0) {
y = y * y / sc->mode.accelfactor;
if (y == 0)
y = 1;
if (c & MOUSE_PS2_YNEG)
y = -y;
}
}
Add support for the Synaptics Touchpad mouse driver. I reworked the submitted version with style cleanups and changes to comments. I also modified the ioctl interface. This version only has one ioctl (to get the Synaptics-specific config parameters) since this is the only information a user might want. Submitted by: Arne Schwabe <arne -at- rfc2549.org>
2004-07-30 00:59:40 +00:00
Clean up and fix style(9) nits.
2008-04-08 19:09:45 +00:00
ms.dx = x;
ms.dy = y;
ms.dz = z;
ms.flags = ((x || y || z) ? MOUSE_POSCHANGED : 0) |
(ms.obutton ^ ms.button);
Port the ps/2 mouse driver to the alpha.
1998-11-08 18:43:03 +00:00
- Add write(2) support for psm(4) in native operation level. Now arbitrary commands can be written to /dev/psm%d and status can be read back from it. - Reflect the change in psm(4) and bump version for ports. MFC after: 1 week
2008-04-08 17:55:26 +00:00
pb->inputbytes = tame_mouse(sc, pb, &ms, pb->ipacket);
Port the ps/2 mouse driver to the alpha.
1998-11-08 18:43:03 +00:00
Clean up and fix style(9) nits.
2008-04-08 19:09:45 +00:00
sc->status.flags |= ms.flags;
sc->status.dx += ms.dx;
sc->status.dy += ms.dy;
sc->status.dz += ms.dz;
sc->status.button = ms.button;
sc->button = ms.button;
Port the ps/2 mouse driver to the alpha.
1998-11-08 18:43:03 +00:00
Clean up and fix style(9) nits.
2008-04-08 19:09:45 +00:00
next_native:
- Add Support for the following PS/2 mice: - Microsoft IntelliMouse Explorer: 2 buttons on top, 2 side buttons and a wheel which also acts as the middle button. The mouse is recognized as "IntelliMouse Explorer". - Genius NetScroll Optical: 2 buttons on top, 2 side buttons and a wheel which also acts as the middle button. The mouse is recognized as "NetMouse/NetScroll Optical". - MouseSystems SmartScroll Mouse (OEM from Genius?): 3 buttons on top, 1 side button and a wheel. The mouse is recognized as Genius "NetScroll". - IBM ScrollPoint: 2 buttons on top and a stick between the buttons. The stick can perform "horizontal scroll" in W*ndows environment. The horizontal movement of the stick is detected. It is currently mapped to the Z axis movement in the same way as the first wheel. The mouse is recognized as "MouseMan+", as it is considered to be a variation of MouseMan. - A4 Tech 4D and 4D+ mice. These mice have two wheels! The movement of the second wheel is reported as the Z axis movement in the same way as the first wheel. These mice are recognized as "4D Mouse" and "4D+ Mouse". - Tweak IntelliMouse support code a bit so that less-than-compatible wheel mice can work properly with the psm driver. - Add driver configuration flags which correspond to the kernel options PSM_HOOKRESUME and PSM_RESETAFTERSUSPEND, so that we don't need to recompile the kernel when we need these functions. - Properly keep track of the irq resource. - Add a watchdog timer in case interrupts are lost (experimental). - Add `detach' function (experimental).
2000-03-18 15:21:40 +00:00
sc->watchdog = FALSE;
Clean up and fix style(9) nits.
2008-04-08 19:09:45 +00:00
/* queue data */
if (sc->queue.count + pb->inputbytes < sizeof(sc->queue.buf)) {
l = imin(pb->inputbytes,
sizeof(sc->queue.buf) - sc->queue.tail);
bcopy(&pb->ipacket[0], &sc->queue.buf[sc->queue.tail], l);
if (pb->inputbytes > l)
bcopy(&pb->ipacket[l], &sc->queue.buf[0],
pb->inputbytes - l);
sc->queue.tail = (sc->queue.tail + pb->inputbytes) %
sizeof(sc->queue.buf);
sc->queue.count += pb->inputbytes;
Port the ps/2 mouse driver to the alpha.
1998-11-08 18:43:03 +00:00
}
Clean up and fix style(9) nits.
2008-04-08 19:09:45 +00:00
pb->inputbytes = 0;
Port the ps/2 mouse driver to the alpha.
1998-11-08 18:43:03 +00:00
Clean up and fix style(9) nits.
2008-04-08 19:09:45 +00:00
next:
Significantly reduce the "jitter" that is typical for PS/2 mice when using a KVM. There is no actual solution possible, but this gets us pretty close. Typically when switching back to a FreeBSD box and moving the mouse wild data is produced, because the protocol's validation/checksum system is extremely weak it is impossible to determine that we're out of sync before dropping several bogus packets to user land. The actual solution that appears to offer the best clamping of jitter is to buffer the mouse packets if we've not seen mouse activity for more than .5 seconds. Then waiting to flush that data for 1/20th of a second. If within that 20th of a second we get any packets that do fail the weak test we drop the entire queue and back off accepting data from the mouse for 2 seconds and then repeat the whole deal. You can still get _some_ jitter, notably if you switch to the FreeBSD box, then move the mouse just enough to generate one or two packets. Those packets may be bogus, but may still pass the validity check. One way to finally kill the problem once and for all is to check the initial packets for "wild" values. Typically one sees packets in the +/-60 range during normal operation, however when bogus data is generated it's typically near the outer range of +/-120 or more, those packets would be a good candidate for dropping or clamping. I've been running with this for several weeks now and it has significantly helped me stay sane even with a piece of junk Belkin KVM causing wild jitter each and every time I switch. Lastly I'd like to note that my experience with Windows shows me that somehow the Microsoft PS/2 driver typically avoids this problem, but that may only be possible when running the mouse in a dumb-ed down PS/2 mode that Belkin recommends on their site.
2003-12-11 11:28:11 +00:00
if (++sc->pqueue_start >= PSM_PACKETQUEUE)
sc->pqueue_start = 0;
Clean up and fix style(9) nits.
2008-04-08 19:09:45 +00:00
} while (sc->pqueue_start != sc->pqueue_end);
if (sc->state & PSM_ASLP) {
sc->state &= ~PSM_ASLP;
wakeup(sc);
}
selwakeuppri(&sc->rsel, PZERO);
Teach psm about O_ASYNC This makes Xorg happy if you aren't using moused. MFC after: 3 days
2009-03-16 08:21:51 +00:00
if (sc->async != NULL) {
pgsigio(&sc->async, SIGIO, 0);
}
Clean up and fix style(9) nits.
2008-04-08 19:09:45 +00:00
sc->state &= ~PSM_SOFTARMED;
splx(s);
Port the ps/2 mouse driver to the alpha.
1998-11-08 18:43:03 +00:00
}
static int
Do the dreaded s/dev_t/struct cdev */ Bump __FreeBSD_version accordingly.
2004-06-16 09:47:26 +00:00
psmpoll(struct cdev *dev, int events, struct thread *td)
Port the ps/2 mouse driver to the alpha.
1998-11-08 18:43:03 +00:00
{
Let psm(4) use si_drv1 to refer to its softc.
2010-09-09 07:52:15 +00:00
struct psm_softc *sc = dev->si_drv1;
Clean up and fix style(9) nits.
2008-04-08 19:09:45 +00:00
int s;
int revents = 0;
/* Return true if a mouse event available */
s = spltty();
if (events & (POLLIN | POLLRDNORM)) {
if (sc->queue.count > 0)
revents |= events & (POLLIN | POLLRDNORM);
else
selrecord(td, &sc->rsel);
}
splx(s);
Port the ps/2 mouse driver to the alpha.
1998-11-08 18:43:03 +00:00
Clean up and fix style(9) nits.
2008-04-08 19:09:45 +00:00
return (revents);
Port the ps/2 mouse driver to the alpha.
1998-11-08 18:43:03 +00:00
}
/* vendor/model specific routines */
static int mouse_id_proc1(KBDC kbdc, int res, int scale, int *status)
{
Clean up and fix style(9) nits.
2008-04-08 19:09:45 +00:00
if (set_mouse_resolution(kbdc, res) != res)
return (FALSE);
if (set_mouse_scaling(kbdc, scale) &&
set_mouse_scaling(kbdc, scale) &&
set_mouse_scaling(kbdc, scale) &&
(get_mouse_status(kbdc, status, 0, 3) >= 3))
return (TRUE);
return (FALSE);
Port the ps/2 mouse driver to the alpha.
1998-11-08 18:43:03 +00:00
}
Clean up and fix style(9) nits.
2008-04-08 19:09:45 +00:00
static int
- Slightly rearrnage IntelliMouse Explorer and Logitech MouseMan+ identification routines for efficiency. No functional change.
2000-12-01 05:24:30 +00:00
mouse_ext_command(KBDC kbdc, int command)
{
Clean up and fix style(9) nits.
2008-04-08 19:09:45 +00:00
int c;
c = (command >> 6) & 0x03;
if (set_mouse_resolution(kbdc, c) != c)
return (FALSE);
c = (command >> 4) & 0x03;
if (set_mouse_resolution(kbdc, c) != c)
return (FALSE);
c = (command >> 2) & 0x03;
if (set_mouse_resolution(kbdc, c) != c)
return (FALSE);
c = (command >> 0) & 0x03;
if (set_mouse_resolution(kbdc, c) != c)
return (FALSE);
return (TRUE);
- Slightly rearrnage IntelliMouse Explorer and Logitech MouseMan+ identification routines for efficiency. No functional change.
2000-12-01 05:24:30 +00:00
}
Fix -Wundef.
2005-12-04 02:12:43 +00:00
#ifdef notyet
Port the ps/2 mouse driver to the alpha.
1998-11-08 18:43:03 +00:00
/* Logitech MouseMan Cordless II */
static int
Unbreak mouse on resume on Thinkpads when hw.psm.trackpoint_support=0, which is default. It was broken in r281441. It appears that set_trackpoint_parameters() call on resume disables the mouse. So, we need not call it on resume if hw.psm.trackpoint_support=0. The problem is that the probe functions are used both for probing and for reiniting on resume. And the absense of the softc parameter is used as a mark to distinguish reinit and probe, which is quite ugly. At the same time the softc parameter is needed to call set_trackpoint_parameters(). o Change the arguments of probefunc_t to always supply the softc, and use additional enum argument to tell probing from initing. o Don't call set_trackpoint_parameters() from global doinitialize(), instead call it from the enable_trackpoint() only. o In enable_synaptics() call enable_trackpoint() in both probe and reinit cases. Together with: Jan Kokemüller <jan.kokemueller gmail.com>
2015-06-12 13:57:04 +00:00
enable_lcordless(struct psm_softc *sc, enum probearg arg)
Port the ps/2 mouse driver to the alpha.
1998-11-08 18:43:03 +00:00
{
Unbreak mouse on resume on Thinkpads when hw.psm.trackpoint_support=0, which is default. It was broken in r281441. It appears that set_trackpoint_parameters() call on resume disables the mouse. So, we need not call it on resume if hw.psm.trackpoint_support=0. The problem is that the probe functions are used both for probing and for reiniting on resume. And the absense of the softc parameter is used as a mark to distinguish reinit and probe, which is quite ugly. At the same time the softc parameter is needed to call set_trackpoint_parameters(). o Change the arguments of probefunc_t to always supply the softc, and use additional enum argument to tell probing from initing. o Don't call set_trackpoint_parameters() from global doinitialize(), instead call it from the enable_trackpoint() only. o In enable_synaptics() call enable_trackpoint() in both probe and reinit cases. Together with: Jan Kokemüller <jan.kokemueller gmail.com>
2015-06-12 13:57:04 +00:00
KBDC kbdc = sc->kbdc;
Clean up and fix style(9) nits.
2008-04-08 19:09:45 +00:00
int status[3];
int ch;
- Do not clobber softc when psm(4) is reintialized. - Make INITAFTERSUSPEND flag independent of HOOKRESUME flag. - Automatically set INITAFTERSUSPEND flag when ALPS GlidePoint is detected. - Always probe Synaptics Touchpad. Allow MOUSE_SYN_GETHWINFO ioctl and automatically set INITAFTERSUSPEND flag when a supported device is detected, regardless of "hw.psm.synaptics_support" tunable setting. - Update psm(4) to reflect the above changes. - Remove long-time defunct SYNCHACK flag while I am in the neighborhood. MFC after: 1 month
2012-03-27 23:43:01 +00:00
if (!mouse_id_proc1(kbdc, PSMD_RES_HIGH, 2, status))
Clean up and fix style(9) nits.
2008-04-08 19:09:45 +00:00
return (FALSE);
if (status[1] == PSMD_RES_HIGH)
return (FALSE);
ch = (status[0] & 0x07) - 1; /* channel # */
if ((ch <= 0) || (ch > 4))
return (FALSE);
/*
* status[1]: always one?
* status[2]: battery status? (0-100)
*/
return (TRUE);
Port the ps/2 mouse driver to the alpha.
1998-11-08 18:43:03 +00:00
}
#endif /* notyet */
- Add Support for the following PS/2 mice: - Microsoft IntelliMouse Explorer: 2 buttons on top, 2 side buttons and a wheel which also acts as the middle button. The mouse is recognized as "IntelliMouse Explorer". - Genius NetScroll Optical: 2 buttons on top, 2 side buttons and a wheel which also acts as the middle button. The mouse is recognized as "NetMouse/NetScroll Optical". - MouseSystems SmartScroll Mouse (OEM from Genius?): 3 buttons on top, 1 side button and a wheel. The mouse is recognized as Genius "NetScroll". - IBM ScrollPoint: 2 buttons on top and a stick between the buttons. The stick can perform "horizontal scroll" in W*ndows environment. The horizontal movement of the stick is detected. It is currently mapped to the Z axis movement in the same way as the first wheel. The mouse is recognized as "MouseMan+", as it is considered to be a variation of MouseMan. - A4 Tech 4D and 4D+ mice. These mice have two wheels! The movement of the second wheel is reported as the Z axis movement in the same way as the first wheel. These mice are recognized as "4D Mouse" and "4D+ Mouse". - Tweak IntelliMouse support code a bit so that less-than-compatible wheel mice can work properly with the psm driver. - Add driver configuration flags which correspond to the kernel options PSM_HOOKRESUME and PSM_RESETAFTERSUSPEND, so that we don't need to recompile the kernel when we need these functions. - Properly keep track of the irq resource. - Add a watchdog timer in case interrupts are lost (experimental). - Add `detach' function (experimental).
2000-03-18 15:21:40 +00:00
/* Genius NetScroll Mouse, MouseSystems SmartScroll Mouse */
Port the ps/2 mouse driver to the alpha.
1998-11-08 18:43:03 +00:00
static int
Unbreak mouse on resume on Thinkpads when hw.psm.trackpoint_support=0, which is default. It was broken in r281441. It appears that set_trackpoint_parameters() call on resume disables the mouse. So, we need not call it on resume if hw.psm.trackpoint_support=0. The problem is that the probe functions are used both for probing and for reiniting on resume. And the absense of the softc parameter is used as a mark to distinguish reinit and probe, which is quite ugly. At the same time the softc parameter is needed to call set_trackpoint_parameters(). o Change the arguments of probefunc_t to always supply the softc, and use additional enum argument to tell probing from initing. o Don't call set_trackpoint_parameters() from global doinitialize(), instead call it from the enable_trackpoint() only. o In enable_synaptics() call enable_trackpoint() in both probe and reinit cases. Together with: Jan Kokemüller <jan.kokemueller gmail.com>
2015-06-12 13:57:04 +00:00
enable_groller(struct psm_softc *sc, enum probearg arg)
Port the ps/2 mouse driver to the alpha.
1998-11-08 18:43:03 +00:00
{
Unbreak mouse on resume on Thinkpads when hw.psm.trackpoint_support=0, which is default. It was broken in r281441. It appears that set_trackpoint_parameters() call on resume disables the mouse. So, we need not call it on resume if hw.psm.trackpoint_support=0. The problem is that the probe functions are used both for probing and for reiniting on resume. And the absense of the softc parameter is used as a mark to distinguish reinit and probe, which is quite ugly. At the same time the softc parameter is needed to call set_trackpoint_parameters(). o Change the arguments of probefunc_t to always supply the softc, and use additional enum argument to tell probing from initing. o Don't call set_trackpoint_parameters() from global doinitialize(), instead call it from the enable_trackpoint() only. o In enable_synaptics() call enable_trackpoint() in both probe and reinit cases. Together with: Jan Kokemüller <jan.kokemueller gmail.com>
2015-06-12 13:57:04 +00:00
KBDC kbdc = sc->kbdc;
Clean up and fix style(9) nits.
2008-04-08 19:09:45 +00:00
int status[3];
/*
* The special sequence to enable the fourth button and the
* roller. Immediately after this sequence check status bytes.
* if the mouse is NetScroll, the second and the third bytes are
* '3' and 'D'.
*/
/*
* If the mouse is an ordinary PS/2 mouse, the status bytes should
* look like the following.
*
* byte 1 bit 7 always 0
* bit 6 stream mode (0)
* bit 5 disabled (0)
* bit 4 1:1 scaling (0)
* bit 3 always 0
* bit 0-2 button status
* byte 2 resolution (PSMD_RES_HIGH)
* byte 3 report rate (?)
*/
- Do not clobber softc when psm(4) is reintialized. - Make INITAFTERSUSPEND flag independent of HOOKRESUME flag. - Automatically set INITAFTERSUSPEND flag when ALPS GlidePoint is detected. - Always probe Synaptics Touchpad. Allow MOUSE_SYN_GETHWINFO ioctl and automatically set INITAFTERSUSPEND flag when a supported device is detected, regardless of "hw.psm.synaptics_support" tunable setting. - Update psm(4) to reflect the above changes. - Remove long-time defunct SYNCHACK flag while I am in the neighborhood. MFC after: 1 month
2012-03-27 23:43:01 +00:00
if (!mouse_id_proc1(kbdc, PSMD_RES_HIGH, 1, status))
Clean up and fix style(9) nits.
2008-04-08 19:09:45 +00:00
return (FALSE);
if ((status[1] != '3') || (status[2] != 'D'))
return (FALSE);
/* FIXME: SmartScroll Mouse has 5 buttons! XXX */
Unbreak mouse on resume on Thinkpads when hw.psm.trackpoint_support=0, which is default. It was broken in r281441. It appears that set_trackpoint_parameters() call on resume disables the mouse. So, we need not call it on resume if hw.psm.trackpoint_support=0. The problem is that the probe functions are used both for probing and for reiniting on resume. And the absense of the softc parameter is used as a mark to distinguish reinit and probe, which is quite ugly. At the same time the softc parameter is needed to call set_trackpoint_parameters(). o Change the arguments of probefunc_t to always supply the softc, and use additional enum argument to tell probing from initing. o Don't call set_trackpoint_parameters() from global doinitialize(), instead call it from the enable_trackpoint() only. o In enable_synaptics() call enable_trackpoint() in both probe and reinit cases. Together with: Jan Kokemüller <jan.kokemueller gmail.com>
2015-06-12 13:57:04 +00:00
if (arg == PROBE)
- Do not clobber softc when psm(4) is reintialized. - Make INITAFTERSUSPEND flag independent of HOOKRESUME flag. - Automatically set INITAFTERSUSPEND flag when ALPS GlidePoint is detected. - Always probe Synaptics Touchpad. Allow MOUSE_SYN_GETHWINFO ioctl and automatically set INITAFTERSUSPEND flag when a supported device is detected, regardless of "hw.psm.synaptics_support" tunable setting. - Update psm(4) to reflect the above changes. - Remove long-time defunct SYNCHACK flag while I am in the neighborhood. MFC after: 1 month
2012-03-27 23:43:01 +00:00
sc->hw.buttons = 4;
Clean up and fix style(9) nits.
2008-04-08 19:09:45 +00:00
return (TRUE);
Port the ps/2 mouse driver to the alpha.
1998-11-08 18:43:03 +00:00
}
- Add Support for the following PS/2 mice: - Microsoft IntelliMouse Explorer: 2 buttons on top, 2 side buttons and a wheel which also acts as the middle button. The mouse is recognized as "IntelliMouse Explorer". - Genius NetScroll Optical: 2 buttons on top, 2 side buttons and a wheel which also acts as the middle button. The mouse is recognized as "NetMouse/NetScroll Optical". - MouseSystems SmartScroll Mouse (OEM from Genius?): 3 buttons on top, 1 side button and a wheel. The mouse is recognized as Genius "NetScroll". - IBM ScrollPoint: 2 buttons on top and a stick between the buttons. The stick can perform "horizontal scroll" in W*ndows environment. The horizontal movement of the stick is detected. It is currently mapped to the Z axis movement in the same way as the first wheel. The mouse is recognized as "MouseMan+", as it is considered to be a variation of MouseMan. - A4 Tech 4D and 4D+ mice. These mice have two wheels! The movement of the second wheel is reported as the Z axis movement in the same way as the first wheel. These mice are recognized as "4D Mouse" and "4D+ Mouse". - Tweak IntelliMouse support code a bit so that less-than-compatible wheel mice can work properly with the psm driver. - Add driver configuration flags which correspond to the kernel options PSM_HOOKRESUME and PSM_RESETAFTERSUSPEND, so that we don't need to recompile the kernel when we need these functions. - Properly keep track of the irq resource. - Add a watchdog timer in case interrupts are lost (experimental). - Add `detach' function (experimental).
2000-03-18 15:21:40 +00:00
/* Genius NetMouse/NetMouse Pro, ASCII Mie Mouse, NetScroll Optical */
Port the ps/2 mouse driver to the alpha.
1998-11-08 18:43:03 +00:00
static int
Unbreak mouse on resume on Thinkpads when hw.psm.trackpoint_support=0, which is default. It was broken in r281441. It appears that set_trackpoint_parameters() call on resume disables the mouse. So, we need not call it on resume if hw.psm.trackpoint_support=0. The problem is that the probe functions are used both for probing and for reiniting on resume. And the absense of the softc parameter is used as a mark to distinguish reinit and probe, which is quite ugly. At the same time the softc parameter is needed to call set_trackpoint_parameters(). o Change the arguments of probefunc_t to always supply the softc, and use additional enum argument to tell probing from initing. o Don't call set_trackpoint_parameters() from global doinitialize(), instead call it from the enable_trackpoint() only. o In enable_synaptics() call enable_trackpoint() in both probe and reinit cases. Together with: Jan Kokemüller <jan.kokemueller gmail.com>
2015-06-12 13:57:04 +00:00
enable_gmouse(struct psm_softc *sc, enum probearg arg)
Port the ps/2 mouse driver to the alpha.
1998-11-08 18:43:03 +00:00
{
Unbreak mouse on resume on Thinkpads when hw.psm.trackpoint_support=0, which is default. It was broken in r281441. It appears that set_trackpoint_parameters() call on resume disables the mouse. So, we need not call it on resume if hw.psm.trackpoint_support=0. The problem is that the probe functions are used both for probing and for reiniting on resume. And the absense of the softc parameter is used as a mark to distinguish reinit and probe, which is quite ugly. At the same time the softc parameter is needed to call set_trackpoint_parameters(). o Change the arguments of probefunc_t to always supply the softc, and use additional enum argument to tell probing from initing. o Don't call set_trackpoint_parameters() from global doinitialize(), instead call it from the enable_trackpoint() only. o In enable_synaptics() call enable_trackpoint() in both probe and reinit cases. Together with: Jan Kokemüller <jan.kokemueller gmail.com>
2015-06-12 13:57:04 +00:00
KBDC kbdc = sc->kbdc;
Clean up and fix style(9) nits.
2008-04-08 19:09:45 +00:00
int status[3];
/*
* The special sequence to enable the middle, "rubber" button.
* Immediately after this sequence check status bytes.
* if the mouse is NetMouse, NetMouse Pro, or ASCII MIE Mouse,
* the second and the third bytes are '3' and 'U'.
* NOTE: NetMouse reports that it has three buttons although it has
* two buttons and a rubber button. NetMouse Pro and MIE Mouse
* say they have three buttons too and they do have a button on the
* side...
*/
- Do not clobber softc when psm(4) is reintialized. - Make INITAFTERSUSPEND flag independent of HOOKRESUME flag. - Automatically set INITAFTERSUSPEND flag when ALPS GlidePoint is detected. - Always probe Synaptics Touchpad. Allow MOUSE_SYN_GETHWINFO ioctl and automatically set INITAFTERSUSPEND flag when a supported device is detected, regardless of "hw.psm.synaptics_support" tunable setting. - Update psm(4) to reflect the above changes. - Remove long-time defunct SYNCHACK flag while I am in the neighborhood. MFC after: 1 month
2012-03-27 23:43:01 +00:00
if (!mouse_id_proc1(kbdc, PSMD_RES_HIGH, 1, status))
Clean up and fix style(9) nits.
2008-04-08 19:09:45 +00:00
return (FALSE);
if ((status[1] != '3') || (status[2] != 'U'))
return (FALSE);
return (TRUE);
Port the ps/2 mouse driver to the alpha.
1998-11-08 18:43:03 +00:00
}
/* ALPS GlidePoint */
static int
Unbreak mouse on resume on Thinkpads when hw.psm.trackpoint_support=0, which is default. It was broken in r281441. It appears that set_trackpoint_parameters() call on resume disables the mouse. So, we need not call it on resume if hw.psm.trackpoint_support=0. The problem is that the probe functions are used both for probing and for reiniting on resume. And the absense of the softc parameter is used as a mark to distinguish reinit and probe, which is quite ugly. At the same time the softc parameter is needed to call set_trackpoint_parameters(). o Change the arguments of probefunc_t to always supply the softc, and use additional enum argument to tell probing from initing. o Don't call set_trackpoint_parameters() from global doinitialize(), instead call it from the enable_trackpoint() only. o In enable_synaptics() call enable_trackpoint() in both probe and reinit cases. Together with: Jan Kokemüller <jan.kokemueller gmail.com>
2015-06-12 13:57:04 +00:00
enable_aglide(struct psm_softc *sc, enum probearg arg)
Port the ps/2 mouse driver to the alpha.
1998-11-08 18:43:03 +00:00
{
Unbreak mouse on resume on Thinkpads when hw.psm.trackpoint_support=0, which is default. It was broken in r281441. It appears that set_trackpoint_parameters() call on resume disables the mouse. So, we need not call it on resume if hw.psm.trackpoint_support=0. The problem is that the probe functions are used both for probing and for reiniting on resume. And the absense of the softc parameter is used as a mark to distinguish reinit and probe, which is quite ugly. At the same time the softc parameter is needed to call set_trackpoint_parameters(). o Change the arguments of probefunc_t to always supply the softc, and use additional enum argument to tell probing from initing. o Don't call set_trackpoint_parameters() from global doinitialize(), instead call it from the enable_trackpoint() only. o In enable_synaptics() call enable_trackpoint() in both probe and reinit cases. Together with: Jan Kokemüller <jan.kokemueller gmail.com>
2015-06-12 13:57:04 +00:00
KBDC kbdc = sc->kbdc;
Clean up and fix style(9) nits.
2008-04-08 19:09:45 +00:00
int status[3];
/*
* The special sequence to obtain ALPS GlidePoint specific
* information. Immediately after this sequence, status bytes will
* contain something interesting.
* NOTE: ALPS produces several models of GlidePoint. Some of those
* do not respond to this sequence, thus, cannot be detected this way.
*/
- Do not clobber softc when psm(4) is reintialized. - Make INITAFTERSUSPEND flag independent of HOOKRESUME flag. - Automatically set INITAFTERSUSPEND flag when ALPS GlidePoint is detected. - Always probe Synaptics Touchpad. Allow MOUSE_SYN_GETHWINFO ioctl and automatically set INITAFTERSUSPEND flag when a supported device is detected, regardless of "hw.psm.synaptics_support" tunable setting. - Update psm(4) to reflect the above changes. - Remove long-time defunct SYNCHACK flag while I am in the neighborhood. MFC after: 1 month
2012-03-27 23:43:01 +00:00
if (set_mouse_sampling_rate(kbdc, 100) != 100)
Clean up and fix style(9) nits.
2008-04-08 19:09:45 +00:00
return (FALSE);
- Do not clobber softc when psm(4) is reintialized. - Make INITAFTERSUSPEND flag independent of HOOKRESUME flag. - Automatically set INITAFTERSUSPEND flag when ALPS GlidePoint is detected. - Always probe Synaptics Touchpad. Allow MOUSE_SYN_GETHWINFO ioctl and automatically set INITAFTERSUSPEND flag when a supported device is detected, regardless of "hw.psm.synaptics_support" tunable setting. - Update psm(4) to reflect the above changes. - Remove long-time defunct SYNCHACK flag while I am in the neighborhood. MFC after: 1 month
2012-03-27 23:43:01 +00:00
if (!mouse_id_proc1(kbdc, PSMD_RES_LOW, 2, status))
Clean up and fix style(9) nits.
2008-04-08 19:09:45 +00:00
return (FALSE);
if ((status[1] == PSMD_RES_LOW) || (status[2] == 100))
return (FALSE);
return (TRUE);
Port the ps/2 mouse driver to the alpha.
1998-11-08 18:43:03 +00:00
}
/* Kensington ThinkingMouse/Trackball */
static int
Unbreak mouse on resume on Thinkpads when hw.psm.trackpoint_support=0, which is default. It was broken in r281441. It appears that set_trackpoint_parameters() call on resume disables the mouse. So, we need not call it on resume if hw.psm.trackpoint_support=0. The problem is that the probe functions are used both for probing and for reiniting on resume. And the absense of the softc parameter is used as a mark to distinguish reinit and probe, which is quite ugly. At the same time the softc parameter is needed to call set_trackpoint_parameters(). o Change the arguments of probefunc_t to always supply the softc, and use additional enum argument to tell probing from initing. o Don't call set_trackpoint_parameters() from global doinitialize(), instead call it from the enable_trackpoint() only. o In enable_synaptics() call enable_trackpoint() in both probe and reinit cases. Together with: Jan Kokemüller <jan.kokemueller gmail.com>
2015-06-12 13:57:04 +00:00
enable_kmouse(struct psm_softc *sc, enum probearg arg)
Port the ps/2 mouse driver to the alpha.
1998-11-08 18:43:03 +00:00
{
Clean up and fix style(9) nits.
2008-04-08 19:09:45 +00:00
static u_char rate[] = { 20, 60, 40, 20, 20, 60, 40, 20, 20 };
Unbreak mouse on resume on Thinkpads when hw.psm.trackpoint_support=0, which is default. It was broken in r281441. It appears that set_trackpoint_parameters() call on resume disables the mouse. So, we need not call it on resume if hw.psm.trackpoint_support=0. The problem is that the probe functions are used both for probing and for reiniting on resume. And the absense of the softc parameter is used as a mark to distinguish reinit and probe, which is quite ugly. At the same time the softc parameter is needed to call set_trackpoint_parameters(). o Change the arguments of probefunc_t to always supply the softc, and use additional enum argument to tell probing from initing. o Don't call set_trackpoint_parameters() from global doinitialize(), instead call it from the enable_trackpoint() only. o In enable_synaptics() call enable_trackpoint() in both probe and reinit cases. Together with: Jan Kokemüller <jan.kokemueller gmail.com>
2015-06-12 13:57:04 +00:00
KBDC kbdc = sc->kbdc;
Clean up and fix style(9) nits.
2008-04-08 19:09:45 +00:00
int status[3];
int id1;
int id2;
int i;
id1 = get_aux_id(kbdc);
if (set_mouse_sampling_rate(kbdc, 10) != 10)
return (FALSE);
/*
* The device is now in the native mode? It returns a different
* ID value...
*/
id2 = get_aux_id(kbdc);
if ((id1 == id2) || (id2 != 2))
return (FALSE);
if (set_mouse_resolution(kbdc, PSMD_RES_LOW) != PSMD_RES_LOW)
return (FALSE);
Port the ps/2 mouse driver to the alpha.
1998-11-08 18:43:03 +00:00
#if PSM_DEBUG >= 2
Clean up and fix style(9) nits.
2008-04-08 19:09:45 +00:00
/* at this point, resolution is LOW, sampling rate is 10/sec */
if (get_mouse_status(kbdc, status, 0, 3) < 3)
return (FALSE);
Port the ps/2 mouse driver to the alpha.
1998-11-08 18:43:03 +00:00
#endif
Clean up and fix style(9) nits.
2008-04-08 19:09:45 +00:00
/*
* The special sequence to enable the third and fourth buttons.
* Otherwise they behave like the first and second buttons.
*/
sys/dev: use our nitems() macro when it is avaliable through param.h. No functional change, only trivial cases are done in this sweep, Drivers that can get further enhancements will be done independently. Discussed in: freebsd-current
2016-04-19 23:37:24 +00:00
for (i = 0; i < nitems(rate); ++i)
Clean up and fix style(9) nits.
2008-04-08 19:09:45 +00:00
if (set_mouse_sampling_rate(kbdc, rate[i]) != rate[i])
return (FALSE);
/*
* At this point, the device is using default resolution and
* sampling rate for the native mode.
*/
if (get_mouse_status(kbdc, status, 0, 3) < 3)
return (FALSE);
if ((status[1] == PSMD_RES_LOW) || (status[2] == rate[i - 1]))
return (FALSE);
/* the device appears be enabled by this sequence, diable it for now */
disable_aux_dev(kbdc);
empty_aux_buffer(kbdc, 5);
return (TRUE);
Port the ps/2 mouse driver to the alpha.
1998-11-08 18:43:03 +00:00
}
- Add Support for the following PS/2 mice: - Microsoft IntelliMouse Explorer: 2 buttons on top, 2 side buttons and a wheel which also acts as the middle button. The mouse is recognized as "IntelliMouse Explorer". - Genius NetScroll Optical: 2 buttons on top, 2 side buttons and a wheel which also acts as the middle button. The mouse is recognized as "NetMouse/NetScroll Optical". - MouseSystems SmartScroll Mouse (OEM from Genius?): 3 buttons on top, 1 side button and a wheel. The mouse is recognized as Genius "NetScroll". - IBM ScrollPoint: 2 buttons on top and a stick between the buttons. The stick can perform "horizontal scroll" in W*ndows environment. The horizontal movement of the stick is detected. It is currently mapped to the Z axis movement in the same way as the first wheel. The mouse is recognized as "MouseMan+", as it is considered to be a variation of MouseMan. - A4 Tech 4D and 4D+ mice. These mice have two wheels! The movement of the second wheel is reported as the Z axis movement in the same way as the first wheel. These mice are recognized as "4D Mouse" and "4D+ Mouse". - Tweak IntelliMouse support code a bit so that less-than-compatible wheel mice can work properly with the psm driver. - Add driver configuration flags which correspond to the kernel options PSM_HOOKRESUME and PSM_RESETAFTERSUSPEND, so that we don't need to recompile the kernel when we need these functions. - Properly keep track of the irq resource. - Add a watchdog timer in case interrupts are lost (experimental). - Add `detach' function (experimental).
2000-03-18 15:21:40 +00:00
/* Logitech MouseMan+/FirstMouse+, IBM ScrollPoint Mouse */
Port the ps/2 mouse driver to the alpha.
1998-11-08 18:43:03 +00:00
static int
Unbreak mouse on resume on Thinkpads when hw.psm.trackpoint_support=0, which is default. It was broken in r281441. It appears that set_trackpoint_parameters() call on resume disables the mouse. So, we need not call it on resume if hw.psm.trackpoint_support=0. The problem is that the probe functions are used both for probing and for reiniting on resume. And the absense of the softc parameter is used as a mark to distinguish reinit and probe, which is quite ugly. At the same time the softc parameter is needed to call set_trackpoint_parameters(). o Change the arguments of probefunc_t to always supply the softc, and use additional enum argument to tell probing from initing. o Don't call set_trackpoint_parameters() from global doinitialize(), instead call it from the enable_trackpoint() only. o In enable_synaptics() call enable_trackpoint() in both probe and reinit cases. Together with: Jan Kokemüller <jan.kokemueller gmail.com>
2015-06-12 13:57:04 +00:00
enable_mmanplus(struct psm_softc *sc, enum probearg arg)
Port the ps/2 mouse driver to the alpha.
1998-11-08 18:43:03 +00:00
{
Unbreak mouse on resume on Thinkpads when hw.psm.trackpoint_support=0, which is default. It was broken in r281441. It appears that set_trackpoint_parameters() call on resume disables the mouse. So, we need not call it on resume if hw.psm.trackpoint_support=0. The problem is that the probe functions are used both for probing and for reiniting on resume. And the absense of the softc parameter is used as a mark to distinguish reinit and probe, which is quite ugly. At the same time the softc parameter is needed to call set_trackpoint_parameters(). o Change the arguments of probefunc_t to always supply the softc, and use additional enum argument to tell probing from initing. o Don't call set_trackpoint_parameters() from global doinitialize(), instead call it from the enable_trackpoint() only. o In enable_synaptics() call enable_trackpoint() in both probe and reinit cases. Together with: Jan Kokemüller <jan.kokemueller gmail.com>
2015-06-12 13:57:04 +00:00
KBDC kbdc = sc->kbdc;
Clean up and fix style(9) nits.
2008-04-08 19:09:45 +00:00
int data[3];
/* the special sequence to enable the fourth button and the roller. */
/*
* NOTE: for ScrollPoint to respond correctly, the SET_RESOLUTION
* must be called exactly three times since the last RESET command
* before this sequence. XXX
*/
if (!set_mouse_scaling(kbdc, 1))
return (FALSE);
if (!mouse_ext_command(kbdc, 0x39) || !mouse_ext_command(kbdc, 0xdb))
return (FALSE);
if (get_mouse_status(kbdc, data, 1, 3) < 3)
return (FALSE);
/*
Fix typo: s/protocl/protocol
2012-09-20 10:07:31 +00:00
* PS2++ protocol, packet type 0
Clean up and fix style(9) nits.
2008-04-08 19:09:45 +00:00
*
* b7 b6 b5 b4 b3 b2 b1 b0
* byte 1: * 1 p3 p2 1 * * *
* byte 2: 1 1 p1 p0 m1 m0 1 0
* byte 3: m7 m6 m5 m4 m3 m2 m1 m0
*
* p3-p0: packet type: 0
* m7-m0: model ID: MouseMan+:0x50,
* FirstMouse+:0x51,
* ScrollPoint:0x58...
*/
/* check constant bits */
if ((data[0] & MOUSE_PS2PLUS_SYNCMASK) != MOUSE_PS2PLUS_SYNC)
return (FALSE);
if ((data[1] & 0xc3) != 0xc2)
return (FALSE);
/* check d3-d0 in byte 2 */
if (!MOUSE_PS2PLUS_CHECKBITS(data))
return (FALSE);
/* check p3-p0 */
if (MOUSE_PS2PLUS_PACKET_TYPE(data) != 0)
return (FALSE);
Unbreak mouse on resume on Thinkpads when hw.psm.trackpoint_support=0, which is default. It was broken in r281441. It appears that set_trackpoint_parameters() call on resume disables the mouse. So, we need not call it on resume if hw.psm.trackpoint_support=0. The problem is that the probe functions are used both for probing and for reiniting on resume. And the absense of the softc parameter is used as a mark to distinguish reinit and probe, which is quite ugly. At the same time the softc parameter is needed to call set_trackpoint_parameters(). o Change the arguments of probefunc_t to always supply the softc, and use additional enum argument to tell probing from initing. o Don't call set_trackpoint_parameters() from global doinitialize(), instead call it from the enable_trackpoint() only. o In enable_synaptics() call enable_trackpoint() in both probe and reinit cases. Together with: Jan Kokemüller <jan.kokemueller gmail.com>
2015-06-12 13:57:04 +00:00
if (arg == PROBE) {
- Do not clobber softc when psm(4) is reintialized. - Make INITAFTERSUSPEND flag independent of HOOKRESUME flag. - Automatically set INITAFTERSUSPEND flag when ALPS GlidePoint is detected. - Always probe Synaptics Touchpad. Allow MOUSE_SYN_GETHWINFO ioctl and automatically set INITAFTERSUSPEND flag when a supported device is detected, regardless of "hw.psm.synaptics_support" tunable setting. - Update psm(4) to reflect the above changes. - Remove long-time defunct SYNCHACK flag while I am in the neighborhood. MFC after: 1 month
2012-03-27 23:43:01 +00:00
sc->hw.hwid &= 0x00ff;
sc->hw.hwid |= data[2] << 8; /* save model ID */
}
Clean up and fix style(9) nits.
2008-04-08 19:09:45 +00:00
/*
* MouseMan+ (or FirstMouse+) is now in its native mode, in which
* the wheel and the fourth button events are encoded in the
* special data packet. The mouse may be put in the IntelliMouse mode
* if it is initialized by the IntelliMouse's method.
*/
return (TRUE);
Port the ps/2 mouse driver to the alpha.
1998-11-08 18:43:03 +00:00
}
- Add Support for the following PS/2 mice: - Microsoft IntelliMouse Explorer: 2 buttons on top, 2 side buttons and a wheel which also acts as the middle button. The mouse is recognized as "IntelliMouse Explorer". - Genius NetScroll Optical: 2 buttons on top, 2 side buttons and a wheel which also acts as the middle button. The mouse is recognized as "NetMouse/NetScroll Optical". - MouseSystems SmartScroll Mouse (OEM from Genius?): 3 buttons on top, 1 side button and a wheel. The mouse is recognized as Genius "NetScroll". - IBM ScrollPoint: 2 buttons on top and a stick between the buttons. The stick can perform "horizontal scroll" in W*ndows environment. The horizontal movement of the stick is detected. It is currently mapped to the Z axis movement in the same way as the first wheel. The mouse is recognized as "MouseMan+", as it is considered to be a variation of MouseMan. - A4 Tech 4D and 4D+ mice. These mice have two wheels! The movement of the second wheel is reported as the Z axis movement in the same way as the first wheel. These mice are recognized as "4D Mouse" and "4D+ Mouse". - Tweak IntelliMouse support code a bit so that less-than-compatible wheel mice can work properly with the psm driver. - Add driver configuration flags which correspond to the kernel options PSM_HOOKRESUME and PSM_RESETAFTERSUSPEND, so that we don't need to recompile the kernel when we need these functions. - Properly keep track of the irq resource. - Add a watchdog timer in case interrupts are lost (experimental). - Add `detach' function (experimental).
2000-03-18 15:21:40 +00:00
/* MS IntelliMouse Explorer */
static int
Unbreak mouse on resume on Thinkpads when hw.psm.trackpoint_support=0, which is default. It was broken in r281441. It appears that set_trackpoint_parameters() call on resume disables the mouse. So, we need not call it on resume if hw.psm.trackpoint_support=0. The problem is that the probe functions are used both for probing and for reiniting on resume. And the absense of the softc parameter is used as a mark to distinguish reinit and probe, which is quite ugly. At the same time the softc parameter is needed to call set_trackpoint_parameters(). o Change the arguments of probefunc_t to always supply the softc, and use additional enum argument to tell probing from initing. o Don't call set_trackpoint_parameters() from global doinitialize(), instead call it from the enable_trackpoint() only. o In enable_synaptics() call enable_trackpoint() in both probe and reinit cases. Together with: Jan Kokemüller <jan.kokemueller gmail.com>
2015-06-12 13:57:04 +00:00
enable_msexplorer(struct psm_softc *sc, enum probearg arg)
- Add Support for the following PS/2 mice: - Microsoft IntelliMouse Explorer: 2 buttons on top, 2 side buttons and a wheel which also acts as the middle button. The mouse is recognized as "IntelliMouse Explorer". - Genius NetScroll Optical: 2 buttons on top, 2 side buttons and a wheel which also acts as the middle button. The mouse is recognized as "NetMouse/NetScroll Optical". - MouseSystems SmartScroll Mouse (OEM from Genius?): 3 buttons on top, 1 side button and a wheel. The mouse is recognized as Genius "NetScroll". - IBM ScrollPoint: 2 buttons on top and a stick between the buttons. The stick can perform "horizontal scroll" in W*ndows environment. The horizontal movement of the stick is detected. It is currently mapped to the Z axis movement in the same way as the first wheel. The mouse is recognized as "MouseMan+", as it is considered to be a variation of MouseMan. - A4 Tech 4D and 4D+ mice. These mice have two wheels! The movement of the second wheel is reported as the Z axis movement in the same way as the first wheel. These mice are recognized as "4D Mouse" and "4D+ Mouse". - Tweak IntelliMouse support code a bit so that less-than-compatible wheel mice can work properly with the psm driver. - Add driver configuration flags which correspond to the kernel options PSM_HOOKRESUME and PSM_RESETAFTERSUSPEND, so that we don't need to recompile the kernel when we need these functions. - Properly keep track of the irq resource. - Add a watchdog timer in case interrupts are lost (experimental). - Add `detach' function (experimental).
2000-03-18 15:21:40 +00:00
{
Unbreak mouse on resume on Thinkpads when hw.psm.trackpoint_support=0, which is default. It was broken in r281441. It appears that set_trackpoint_parameters() call on resume disables the mouse. So, we need not call it on resume if hw.psm.trackpoint_support=0. The problem is that the probe functions are used both for probing and for reiniting on resume. And the absense of the softc parameter is used as a mark to distinguish reinit and probe, which is quite ugly. At the same time the softc parameter is needed to call set_trackpoint_parameters(). o Change the arguments of probefunc_t to always supply the softc, and use additional enum argument to tell probing from initing. o Don't call set_trackpoint_parameters() from global doinitialize(), instead call it from the enable_trackpoint() only. o In enable_synaptics() call enable_trackpoint() in both probe and reinit cases. Together with: Jan Kokemüller <jan.kokemueller gmail.com>
2015-06-12 13:57:04 +00:00
KBDC kbdc = sc->kbdc;
Clean up and fix style(9) nits.
2008-04-08 19:09:45 +00:00
static u_char rate0[] = { 200, 100, 80, };
static u_char rate1[] = { 200, 200, 80, };
int id;
int i;
/*
* This is needed for at least A4Tech X-7xx mice - they do not go
* straight to Explorer mode, but need to be set to Intelli mode
* first.
*/
Unbreak mouse on resume on Thinkpads when hw.psm.trackpoint_support=0, which is default. It was broken in r281441. It appears that set_trackpoint_parameters() call on resume disables the mouse. So, we need not call it on resume if hw.psm.trackpoint_support=0. The problem is that the probe functions are used both for probing and for reiniting on resume. And the absense of the softc parameter is used as a mark to distinguish reinit and probe, which is quite ugly. At the same time the softc parameter is needed to call set_trackpoint_parameters(). o Change the arguments of probefunc_t to always supply the softc, and use additional enum argument to tell probing from initing. o Don't call set_trackpoint_parameters() from global doinitialize(), instead call it from the enable_trackpoint() only. o In enable_synaptics() call enable_trackpoint() in both probe and reinit cases. Together with: Jan Kokemüller <jan.kokemueller gmail.com>
2015-06-12 13:57:04 +00:00
enable_msintelli(sc, arg);
Clean up and fix style(9) nits.
2008-04-08 19:09:45 +00:00
/* the special sequence to enable the extra buttons and the roller. */
sys/dev: use our nitems() macro when it is avaliable through param.h. No functional change, only trivial cases are done in this sweep, Drivers that can get further enhancements will be done independently. Discussed in: freebsd-current
2016-04-19 23:37:24 +00:00
for (i = 0; i < nitems(rate1); ++i)
Clean up and fix style(9) nits.
2008-04-08 19:09:45 +00:00
if (set_mouse_sampling_rate(kbdc, rate1[i]) != rate1[i])
return (FALSE);
/* the device will give the genuine ID only after the above sequence */
id = get_aux_id(kbdc);
if (id != PSM_EXPLORER_ID)
return (FALSE);
Unbreak mouse on resume on Thinkpads when hw.psm.trackpoint_support=0, which is default. It was broken in r281441. It appears that set_trackpoint_parameters() call on resume disables the mouse. So, we need not call it on resume if hw.psm.trackpoint_support=0. The problem is that the probe functions are used both for probing and for reiniting on resume. And the absense of the softc parameter is used as a mark to distinguish reinit and probe, which is quite ugly. At the same time the softc parameter is needed to call set_trackpoint_parameters(). o Change the arguments of probefunc_t to always supply the softc, and use additional enum argument to tell probing from initing. o Don't call set_trackpoint_parameters() from global doinitialize(), instead call it from the enable_trackpoint() only. o In enable_synaptics() call enable_trackpoint() in both probe and reinit cases. Together with: Jan Kokemüller <jan.kokemueller gmail.com>
2015-06-12 13:57:04 +00:00
if (arg == PROBE) {
- Do not clobber softc when psm(4) is reintialized. - Make INITAFTERSUSPEND flag independent of HOOKRESUME flag. - Automatically set INITAFTERSUSPEND flag when ALPS GlidePoint is detected. - Always probe Synaptics Touchpad. Allow MOUSE_SYN_GETHWINFO ioctl and automatically set INITAFTERSUSPEND flag when a supported device is detected, regardless of "hw.psm.synaptics_support" tunable setting. - Update psm(4) to reflect the above changes. - Remove long-time defunct SYNCHACK flag while I am in the neighborhood. MFC after: 1 month
2012-03-27 23:43:01 +00:00
sc->hw.buttons = 5; /* IntelliMouse Explorer XXX */
sc->hw.hwid = id;
}
Clean up and fix style(9) nits.
2008-04-08 19:09:45 +00:00
/*
* XXX: this is a kludge to fool some KVM switch products
* which think they are clever enough to know the 4-byte IntelliMouse
* protocol, and assume any other protocols use 3-byte packets.
* They don't convey 4-byte data packets from the IntelliMouse Explorer
* correctly to the host computer because of this!
* The following sequence is actually IntelliMouse's "wake up"
* sequence; it will make the KVM think the mouse is IntelliMouse
* when it is in fact IntelliMouse Explorer.
*/
sys/dev: use our nitems() macro when it is avaliable through param.h. No functional change, only trivial cases are done in this sweep, Drivers that can get further enhancements will be done independently. Discussed in: freebsd-current
2016-04-19 23:37:24 +00:00
for (i = 0; i < nitems(rate0); ++i)
Clean up and fix style(9) nits.
2008-04-08 19:09:45 +00:00
if (set_mouse_sampling_rate(kbdc, rate0[i]) != rate0[i])
break;
- Do not clobber softc when psm(4) is reintialized. - Make INITAFTERSUSPEND flag independent of HOOKRESUME flag. - Automatically set INITAFTERSUSPEND flag when ALPS GlidePoint is detected. - Always probe Synaptics Touchpad. Allow MOUSE_SYN_GETHWINFO ioctl and automatically set INITAFTERSUSPEND flag when a supported device is detected, regardless of "hw.psm.synaptics_support" tunable setting. - Update psm(4) to reflect the above changes. - Remove long-time defunct SYNCHACK flag while I am in the neighborhood. MFC after: 1 month
2012-03-27 23:43:01 +00:00
get_aux_id(kbdc);
Clean up and fix style(9) nits.
2008-04-08 19:09:45 +00:00
return (TRUE);
- Add Support for the following PS/2 mice: - Microsoft IntelliMouse Explorer: 2 buttons on top, 2 side buttons and a wheel which also acts as the middle button. The mouse is recognized as "IntelliMouse Explorer". - Genius NetScroll Optical: 2 buttons on top, 2 side buttons and a wheel which also acts as the middle button. The mouse is recognized as "NetMouse/NetScroll Optical". - MouseSystems SmartScroll Mouse (OEM from Genius?): 3 buttons on top, 1 side button and a wheel. The mouse is recognized as Genius "NetScroll". - IBM ScrollPoint: 2 buttons on top and a stick between the buttons. The stick can perform "horizontal scroll" in W*ndows environment. The horizontal movement of the stick is detected. It is currently mapped to the Z axis movement in the same way as the first wheel. The mouse is recognized as "MouseMan+", as it is considered to be a variation of MouseMan. - A4 Tech 4D and 4D+ mice. These mice have two wheels! The movement of the second wheel is reported as the Z axis movement in the same way as the first wheel. These mice are recognized as "4D Mouse" and "4D+ Mouse". - Tweak IntelliMouse support code a bit so that less-than-compatible wheel mice can work properly with the psm driver. - Add driver configuration flags which correspond to the kernel options PSM_HOOKRESUME and PSM_RESETAFTERSUSPEND, so that we don't need to recompile the kernel when we need these functions. - Properly keep track of the irq resource. - Add a watchdog timer in case interrupts are lost (experimental). - Add `detach' function (experimental).
2000-03-18 15:21:40 +00:00
}
Unbreak mouse on resume on Thinkpads when hw.psm.trackpoint_support=0, which is default. It was broken in r281441. It appears that set_trackpoint_parameters() call on resume disables the mouse. So, we need not call it on resume if hw.psm.trackpoint_support=0. The problem is that the probe functions are used both for probing and for reiniting on resume. And the absense of the softc parameter is used as a mark to distinguish reinit and probe, which is quite ugly. At the same time the softc parameter is needed to call set_trackpoint_parameters(). o Change the arguments of probefunc_t to always supply the softc, and use additional enum argument to tell probing from initing. o Don't call set_trackpoint_parameters() from global doinitialize(), instead call it from the enable_trackpoint() only. o In enable_synaptics() call enable_trackpoint() in both probe and reinit cases. Together with: Jan Kokemüller <jan.kokemueller gmail.com>
2015-06-12 13:57:04 +00:00
/*
* MS IntelliMouse
* Logitech MouseMan+ and FirstMouse+ will also respond to this
* probe routine and act like IntelliMouse.
*/
Port the ps/2 mouse driver to the alpha.
1998-11-08 18:43:03 +00:00
static int
Unbreak mouse on resume on Thinkpads when hw.psm.trackpoint_support=0, which is default. It was broken in r281441. It appears that set_trackpoint_parameters() call on resume disables the mouse. So, we need not call it on resume if hw.psm.trackpoint_support=0. The problem is that the probe functions are used both for probing and for reiniting on resume. And the absense of the softc parameter is used as a mark to distinguish reinit and probe, which is quite ugly. At the same time the softc parameter is needed to call set_trackpoint_parameters(). o Change the arguments of probefunc_t to always supply the softc, and use additional enum argument to tell probing from initing. o Don't call set_trackpoint_parameters() from global doinitialize(), instead call it from the enable_trackpoint() only. o In enable_synaptics() call enable_trackpoint() in both probe and reinit cases. Together with: Jan Kokemüller <jan.kokemueller gmail.com>
2015-06-12 13:57:04 +00:00
enable_msintelli(struct psm_softc *sc, enum probearg arg)
Port the ps/2 mouse driver to the alpha.
1998-11-08 18:43:03 +00:00
{
Unbreak mouse on resume on Thinkpads when hw.psm.trackpoint_support=0, which is default. It was broken in r281441. It appears that set_trackpoint_parameters() call on resume disables the mouse. So, we need not call it on resume if hw.psm.trackpoint_support=0. The problem is that the probe functions are used both for probing and for reiniting on resume. And the absense of the softc parameter is used as a mark to distinguish reinit and probe, which is quite ugly. At the same time the softc parameter is needed to call set_trackpoint_parameters(). o Change the arguments of probefunc_t to always supply the softc, and use additional enum argument to tell probing from initing. o Don't call set_trackpoint_parameters() from global doinitialize(), instead call it from the enable_trackpoint() only. o In enable_synaptics() call enable_trackpoint() in both probe and reinit cases. Together with: Jan Kokemüller <jan.kokemueller gmail.com>
2015-06-12 13:57:04 +00:00
KBDC kbdc = sc->kbdc;
Clean up and fix style(9) nits.
2008-04-08 19:09:45 +00:00
static u_char rate[] = { 200, 100, 80, };
int id;
int i;
/* the special sequence to enable the third button and the roller. */
sys/dev: use our nitems() macro when it is avaliable through param.h. No functional change, only trivial cases are done in this sweep, Drivers that can get further enhancements will be done independently. Discussed in: freebsd-current
2016-04-19 23:37:24 +00:00
for (i = 0; i < nitems(rate); ++i)
Clean up and fix style(9) nits.
2008-04-08 19:09:45 +00:00
if (set_mouse_sampling_rate(kbdc, rate[i]) != rate[i])
return (FALSE);
/* the device will give the genuine ID only after the above sequence */
id = get_aux_id(kbdc);
if (id != PSM_INTELLI_ID)
return (FALSE);
Unbreak mouse on resume on Thinkpads when hw.psm.trackpoint_support=0, which is default. It was broken in r281441. It appears that set_trackpoint_parameters() call on resume disables the mouse. So, we need not call it on resume if hw.psm.trackpoint_support=0. The problem is that the probe functions are used both for probing and for reiniting on resume. And the absense of the softc parameter is used as a mark to distinguish reinit and probe, which is quite ugly. At the same time the softc parameter is needed to call set_trackpoint_parameters(). o Change the arguments of probefunc_t to always supply the softc, and use additional enum argument to tell probing from initing. o Don't call set_trackpoint_parameters() from global doinitialize(), instead call it from the enable_trackpoint() only. o In enable_synaptics() call enable_trackpoint() in both probe and reinit cases. Together with: Jan Kokemüller <jan.kokemueller gmail.com>
2015-06-12 13:57:04 +00:00
if (arg == PROBE) {
- Do not clobber softc when psm(4) is reintialized. - Make INITAFTERSUSPEND flag independent of HOOKRESUME flag. - Automatically set INITAFTERSUSPEND flag when ALPS GlidePoint is detected. - Always probe Synaptics Touchpad. Allow MOUSE_SYN_GETHWINFO ioctl and automatically set INITAFTERSUSPEND flag when a supported device is detected, regardless of "hw.psm.synaptics_support" tunable setting. - Update psm(4) to reflect the above changes. - Remove long-time defunct SYNCHACK flag while I am in the neighborhood. MFC after: 1 month
2012-03-27 23:43:01 +00:00
sc->hw.buttons = 3;
sc->hw.hwid = id;
}
Clean up and fix style(9) nits.
2008-04-08 19:09:45 +00:00
return (TRUE);
Port the ps/2 mouse driver to the alpha.
1998-11-08 18:43:03 +00:00
}
Unbreak mouse on resume on Thinkpads when hw.psm.trackpoint_support=0, which is default. It was broken in r281441. It appears that set_trackpoint_parameters() call on resume disables the mouse. So, we need not call it on resume if hw.psm.trackpoint_support=0. The problem is that the probe functions are used both for probing and for reiniting on resume. And the absense of the softc parameter is used as a mark to distinguish reinit and probe, which is quite ugly. At the same time the softc parameter is needed to call set_trackpoint_parameters(). o Change the arguments of probefunc_t to always supply the softc, and use additional enum argument to tell probing from initing. o Don't call set_trackpoint_parameters() from global doinitialize(), instead call it from the enable_trackpoint() only. o In enable_synaptics() call enable_trackpoint() in both probe and reinit cases. Together with: Jan Kokemüller <jan.kokemueller gmail.com>
2015-06-12 13:57:04 +00:00
/*
* A4 Tech 4D Mouse
* Newer wheel mice from A4 Tech may use the 4D+ protocol.
*/
- Add Support for the following PS/2 mice: - Microsoft IntelliMouse Explorer: 2 buttons on top, 2 side buttons and a wheel which also acts as the middle button. The mouse is recognized as "IntelliMouse Explorer". - Genius NetScroll Optical: 2 buttons on top, 2 side buttons and a wheel which also acts as the middle button. The mouse is recognized as "NetMouse/NetScroll Optical". - MouseSystems SmartScroll Mouse (OEM from Genius?): 3 buttons on top, 1 side button and a wheel. The mouse is recognized as Genius "NetScroll". - IBM ScrollPoint: 2 buttons on top and a stick between the buttons. The stick can perform "horizontal scroll" in W*ndows environment. The horizontal movement of the stick is detected. It is currently mapped to the Z axis movement in the same way as the first wheel. The mouse is recognized as "MouseMan+", as it is considered to be a variation of MouseMan. - A4 Tech 4D and 4D+ mice. These mice have two wheels! The movement of the second wheel is reported as the Z axis movement in the same way as the first wheel. These mice are recognized as "4D Mouse" and "4D+ Mouse". - Tweak IntelliMouse support code a bit so that less-than-compatible wheel mice can work properly with the psm driver. - Add driver configuration flags which correspond to the kernel options PSM_HOOKRESUME and PSM_RESETAFTERSUSPEND, so that we don't need to recompile the kernel when we need these functions. - Properly keep track of the irq resource. - Add a watchdog timer in case interrupts are lost (experimental). - Add `detach' function (experimental).
2000-03-18 15:21:40 +00:00
static int
Unbreak mouse on resume on Thinkpads when hw.psm.trackpoint_support=0, which is default. It was broken in r281441. It appears that set_trackpoint_parameters() call on resume disables the mouse. So, we need not call it on resume if hw.psm.trackpoint_support=0. The problem is that the probe functions are used both for probing and for reiniting on resume. And the absense of the softc parameter is used as a mark to distinguish reinit and probe, which is quite ugly. At the same time the softc parameter is needed to call set_trackpoint_parameters(). o Change the arguments of probefunc_t to always supply the softc, and use additional enum argument to tell probing from initing. o Don't call set_trackpoint_parameters() from global doinitialize(), instead call it from the enable_trackpoint() only. o In enable_synaptics() call enable_trackpoint() in both probe and reinit cases. Together with: Jan Kokemüller <jan.kokemueller gmail.com>
2015-06-12 13:57:04 +00:00
enable_4dmouse(struct psm_softc *sc, enum probearg arg)
- Add Support for the following PS/2 mice: - Microsoft IntelliMouse Explorer: 2 buttons on top, 2 side buttons and a wheel which also acts as the middle button. The mouse is recognized as "IntelliMouse Explorer". - Genius NetScroll Optical: 2 buttons on top, 2 side buttons and a wheel which also acts as the middle button. The mouse is recognized as "NetMouse/NetScroll Optical". - MouseSystems SmartScroll Mouse (OEM from Genius?): 3 buttons on top, 1 side button and a wheel. The mouse is recognized as Genius "NetScroll". - IBM ScrollPoint: 2 buttons on top and a stick between the buttons. The stick can perform "horizontal scroll" in W*ndows environment. The horizontal movement of the stick is detected. It is currently mapped to the Z axis movement in the same way as the first wheel. The mouse is recognized as "MouseMan+", as it is considered to be a variation of MouseMan. - A4 Tech 4D and 4D+ mice. These mice have two wheels! The movement of the second wheel is reported as the Z axis movement in the same way as the first wheel. These mice are recognized as "4D Mouse" and "4D+ Mouse". - Tweak IntelliMouse support code a bit so that less-than-compatible wheel mice can work properly with the psm driver. - Add driver configuration flags which correspond to the kernel options PSM_HOOKRESUME and PSM_RESETAFTERSUSPEND, so that we don't need to recompile the kernel when we need these functions. - Properly keep track of the irq resource. - Add a watchdog timer in case interrupts are lost (experimental). - Add `detach' function (experimental).
2000-03-18 15:21:40 +00:00
{
Clean up and fix style(9) nits.
2008-04-08 19:09:45 +00:00
static u_char rate[] = { 200, 100, 80, 60, 40, 20 };
Unbreak mouse on resume on Thinkpads when hw.psm.trackpoint_support=0, which is default. It was broken in r281441. It appears that set_trackpoint_parameters() call on resume disables the mouse. So, we need not call it on resume if hw.psm.trackpoint_support=0. The problem is that the probe functions are used both for probing and for reiniting on resume. And the absense of the softc parameter is used as a mark to distinguish reinit and probe, which is quite ugly. At the same time the softc parameter is needed to call set_trackpoint_parameters(). o Change the arguments of probefunc_t to always supply the softc, and use additional enum argument to tell probing from initing. o Don't call set_trackpoint_parameters() from global doinitialize(), instead call it from the enable_trackpoint() only. o In enable_synaptics() call enable_trackpoint() in both probe and reinit cases. Together with: Jan Kokemüller <jan.kokemueller gmail.com>
2015-06-12 13:57:04 +00:00
KBDC kbdc = sc->kbdc;
Clean up and fix style(9) nits.
2008-04-08 19:09:45 +00:00
int id;
int i;
sys/dev: use our nitems() macro when it is avaliable through param.h. No functional change, only trivial cases are done in this sweep, Drivers that can get further enhancements will be done independently. Discussed in: freebsd-current
2016-04-19 23:37:24 +00:00
for (i = 0; i < nitems(rate); ++i)
Clean up and fix style(9) nits.
2008-04-08 19:09:45 +00:00
if (set_mouse_sampling_rate(kbdc, rate[i]) != rate[i])
return (FALSE);
id = get_aux_id(kbdc);
/*
* WinEasy 4D, 4 Way Scroll 4D: 6
* Cable-Free 4D: 8 (4DPLUS)
* WinBest 4D+, 4 Way Scroll 4D+: 8 (4DPLUS)
*/
if (id != PSM_4DMOUSE_ID)
return (FALSE);
Unbreak mouse on resume on Thinkpads when hw.psm.trackpoint_support=0, which is default. It was broken in r281441. It appears that set_trackpoint_parameters() call on resume disables the mouse. So, we need not call it on resume if hw.psm.trackpoint_support=0. The problem is that the probe functions are used both for probing and for reiniting on resume. And the absense of the softc parameter is used as a mark to distinguish reinit and probe, which is quite ugly. At the same time the softc parameter is needed to call set_trackpoint_parameters(). o Change the arguments of probefunc_t to always supply the softc, and use additional enum argument to tell probing from initing. o Don't call set_trackpoint_parameters() from global doinitialize(), instead call it from the enable_trackpoint() only. o In enable_synaptics() call enable_trackpoint() in both probe and reinit cases. Together with: Jan Kokemüller <jan.kokemueller gmail.com>
2015-06-12 13:57:04 +00:00
if (arg == PROBE) {
- Do not clobber softc when psm(4) is reintialized. - Make INITAFTERSUSPEND flag independent of HOOKRESUME flag. - Automatically set INITAFTERSUSPEND flag when ALPS GlidePoint is detected. - Always probe Synaptics Touchpad. Allow MOUSE_SYN_GETHWINFO ioctl and automatically set INITAFTERSUSPEND flag when a supported device is detected, regardless of "hw.psm.synaptics_support" tunable setting. - Update psm(4) to reflect the above changes. - Remove long-time defunct SYNCHACK flag while I am in the neighborhood. MFC after: 1 month
2012-03-27 23:43:01 +00:00
sc->hw.buttons = 3; /* XXX some 4D mice have 4? */
sc->hw.hwid = id;
}
Clean up and fix style(9) nits.
2008-04-08 19:09:45 +00:00
return (TRUE);
- Add Support for the following PS/2 mice: - Microsoft IntelliMouse Explorer: 2 buttons on top, 2 side buttons and a wheel which also acts as the middle button. The mouse is recognized as "IntelliMouse Explorer". - Genius NetScroll Optical: 2 buttons on top, 2 side buttons and a wheel which also acts as the middle button. The mouse is recognized as "NetMouse/NetScroll Optical". - MouseSystems SmartScroll Mouse (OEM from Genius?): 3 buttons on top, 1 side button and a wheel. The mouse is recognized as Genius "NetScroll". - IBM ScrollPoint: 2 buttons on top and a stick between the buttons. The stick can perform "horizontal scroll" in W*ndows environment. The horizontal movement of the stick is detected. It is currently mapped to the Z axis movement in the same way as the first wheel. The mouse is recognized as "MouseMan+", as it is considered to be a variation of MouseMan. - A4 Tech 4D and 4D+ mice. These mice have two wheels! The movement of the second wheel is reported as the Z axis movement in the same way as the first wheel. These mice are recognized as "4D Mouse" and "4D+ Mouse". - Tweak IntelliMouse support code a bit so that less-than-compatible wheel mice can work properly with the psm driver. - Add driver configuration flags which correspond to the kernel options PSM_HOOKRESUME and PSM_RESETAFTERSUSPEND, so that we don't need to recompile the kernel when we need these functions. - Properly keep track of the irq resource. - Add a watchdog timer in case interrupts are lost (experimental). - Add `detach' function (experimental).
2000-03-18 15:21:40 +00:00
}
Unbreak mouse on resume on Thinkpads when hw.psm.trackpoint_support=0, which is default. It was broken in r281441. It appears that set_trackpoint_parameters() call on resume disables the mouse. So, we need not call it on resume if hw.psm.trackpoint_support=0. The problem is that the probe functions are used both for probing and for reiniting on resume. And the absense of the softc parameter is used as a mark to distinguish reinit and probe, which is quite ugly. At the same time the softc parameter is needed to call set_trackpoint_parameters(). o Change the arguments of probefunc_t to always supply the softc, and use additional enum argument to tell probing from initing. o Don't call set_trackpoint_parameters() from global doinitialize(), instead call it from the enable_trackpoint() only. o In enable_synaptics() call enable_trackpoint() in both probe and reinit cases. Together with: Jan Kokemüller <jan.kokemueller gmail.com>
2015-06-12 13:57:04 +00:00
/*
* A4 Tech 4D+ Mouse
* Newer wheel mice from A4 Tech seem to use this protocol.
* Older models are recognized as either 4D Mouse or IntelliMouse.
*/
- Add Support for the following PS/2 mice: - Microsoft IntelliMouse Explorer: 2 buttons on top, 2 side buttons and a wheel which also acts as the middle button. The mouse is recognized as "IntelliMouse Explorer". - Genius NetScroll Optical: 2 buttons on top, 2 side buttons and a wheel which also acts as the middle button. The mouse is recognized as "NetMouse/NetScroll Optical". - MouseSystems SmartScroll Mouse (OEM from Genius?): 3 buttons on top, 1 side button and a wheel. The mouse is recognized as Genius "NetScroll". - IBM ScrollPoint: 2 buttons on top and a stick between the buttons. The stick can perform "horizontal scroll" in W*ndows environment. The horizontal movement of the stick is detected. It is currently mapped to the Z axis movement in the same way as the first wheel. The mouse is recognized as "MouseMan+", as it is considered to be a variation of MouseMan. - A4 Tech 4D and 4D+ mice. These mice have two wheels! The movement of the second wheel is reported as the Z axis movement in the same way as the first wheel. These mice are recognized as "4D Mouse" and "4D+ Mouse". - Tweak IntelliMouse support code a bit so that less-than-compatible wheel mice can work properly with the psm driver. - Add driver configuration flags which correspond to the kernel options PSM_HOOKRESUME and PSM_RESETAFTERSUSPEND, so that we don't need to recompile the kernel when we need these functions. - Properly keep track of the irq resource. - Add a watchdog timer in case interrupts are lost (experimental). - Add `detach' function (experimental).
2000-03-18 15:21:40 +00:00
static int
Unbreak mouse on resume on Thinkpads when hw.psm.trackpoint_support=0, which is default. It was broken in r281441. It appears that set_trackpoint_parameters() call on resume disables the mouse. So, we need not call it on resume if hw.psm.trackpoint_support=0. The problem is that the probe functions are used both for probing and for reiniting on resume. And the absense of the softc parameter is used as a mark to distinguish reinit and probe, which is quite ugly. At the same time the softc parameter is needed to call set_trackpoint_parameters(). o Change the arguments of probefunc_t to always supply the softc, and use additional enum argument to tell probing from initing. o Don't call set_trackpoint_parameters() from global doinitialize(), instead call it from the enable_trackpoint() only. o In enable_synaptics() call enable_trackpoint() in both probe and reinit cases. Together with: Jan Kokemüller <jan.kokemueller gmail.com>
2015-06-12 13:57:04 +00:00
enable_4dplus(struct psm_softc *sc, enum probearg arg)
- Add Support for the following PS/2 mice: - Microsoft IntelliMouse Explorer: 2 buttons on top, 2 side buttons and a wheel which also acts as the middle button. The mouse is recognized as "IntelliMouse Explorer". - Genius NetScroll Optical: 2 buttons on top, 2 side buttons and a wheel which also acts as the middle button. The mouse is recognized as "NetMouse/NetScroll Optical". - MouseSystems SmartScroll Mouse (OEM from Genius?): 3 buttons on top, 1 side button and a wheel. The mouse is recognized as Genius "NetScroll". - IBM ScrollPoint: 2 buttons on top and a stick between the buttons. The stick can perform "horizontal scroll" in W*ndows environment. The horizontal movement of the stick is detected. It is currently mapped to the Z axis movement in the same way as the first wheel. The mouse is recognized as "MouseMan+", as it is considered to be a variation of MouseMan. - A4 Tech 4D and 4D+ mice. These mice have two wheels! The movement of the second wheel is reported as the Z axis movement in the same way as the first wheel. These mice are recognized as "4D Mouse" and "4D+ Mouse". - Tweak IntelliMouse support code a bit so that less-than-compatible wheel mice can work properly with the psm driver. - Add driver configuration flags which correspond to the kernel options PSM_HOOKRESUME and PSM_RESETAFTERSUSPEND, so that we don't need to recompile the kernel when we need these functions. - Properly keep track of the irq resource. - Add a watchdog timer in case interrupts are lost (experimental). - Add `detach' function (experimental).
2000-03-18 15:21:40 +00:00
{
Unbreak mouse on resume on Thinkpads when hw.psm.trackpoint_support=0, which is default. It was broken in r281441. It appears that set_trackpoint_parameters() call on resume disables the mouse. So, we need not call it on resume if hw.psm.trackpoint_support=0. The problem is that the probe functions are used both for probing and for reiniting on resume. And the absense of the softc parameter is used as a mark to distinguish reinit and probe, which is quite ugly. At the same time the softc parameter is needed to call set_trackpoint_parameters(). o Change the arguments of probefunc_t to always supply the softc, and use additional enum argument to tell probing from initing. o Don't call set_trackpoint_parameters() from global doinitialize(), instead call it from the enable_trackpoint() only. o In enable_synaptics() call enable_trackpoint() in both probe and reinit cases. Together with: Jan Kokemüller <jan.kokemueller gmail.com>
2015-06-12 13:57:04 +00:00
KBDC kbdc = sc->kbdc;
Clean up and fix style(9) nits.
2008-04-08 19:09:45 +00:00
int id;
/*
* enable_4dmouse() already issued the following ID sequence...
static u_char rate[] = { 200, 100, 80, 60, 40, 20 };
int i;
for (i = 0; i < sizeof(rate)/sizeof(rate[0]); ++i)
if (set_mouse_sampling_rate(kbdc, rate[i]) != rate[i])
return (FALSE);
*/
id = get_aux_id(kbdc);
switch (id) {
case PSM_4DPLUS_ID:
break;
case PSM_4DPLUS_RFSW35_ID:
break;
default:
return (FALSE);
}
Unbreak mouse on resume on Thinkpads when hw.psm.trackpoint_support=0, which is default. It was broken in r281441. It appears that set_trackpoint_parameters() call on resume disables the mouse. So, we need not call it on resume if hw.psm.trackpoint_support=0. The problem is that the probe functions are used both for probing and for reiniting on resume. And the absense of the softc parameter is used as a mark to distinguish reinit and probe, which is quite ugly. At the same time the softc parameter is needed to call set_trackpoint_parameters(). o Change the arguments of probefunc_t to always supply the softc, and use additional enum argument to tell probing from initing. o Don't call set_trackpoint_parameters() from global doinitialize(), instead call it from the enable_trackpoint() only. o In enable_synaptics() call enable_trackpoint() in both probe and reinit cases. Together with: Jan Kokemüller <jan.kokemueller gmail.com>
2015-06-12 13:57:04 +00:00
if (arg == PROBE) {
- Do not clobber softc when psm(4) is reintialized. - Make INITAFTERSUSPEND flag independent of HOOKRESUME flag. - Automatically set INITAFTERSUSPEND flag when ALPS GlidePoint is detected. - Always probe Synaptics Touchpad. Allow MOUSE_SYN_GETHWINFO ioctl and automatically set INITAFTERSUSPEND flag when a supported device is detected, regardless of "hw.psm.synaptics_support" tunable setting. - Update psm(4) to reflect the above changes. - Remove long-time defunct SYNCHACK flag while I am in the neighborhood. MFC after: 1 month
2012-03-27 23:43:01 +00:00
sc->hw.buttons = (id == PSM_4DPLUS_ID) ? 4 : 3;
sc->hw.hwid = id;
}
Clean up and fix style(9) nits.
2008-04-08 19:09:45 +00:00
return (TRUE);
- Add Support for the following PS/2 mice: - Microsoft IntelliMouse Explorer: 2 buttons on top, 2 side buttons and a wheel which also acts as the middle button. The mouse is recognized as "IntelliMouse Explorer". - Genius NetScroll Optical: 2 buttons on top, 2 side buttons and a wheel which also acts as the middle button. The mouse is recognized as "NetMouse/NetScroll Optical". - MouseSystems SmartScroll Mouse (OEM from Genius?): 3 buttons on top, 1 side button and a wheel. The mouse is recognized as Genius "NetScroll". - IBM ScrollPoint: 2 buttons on top and a stick between the buttons. The stick can perform "horizontal scroll" in W*ndows environment. The horizontal movement of the stick is detected. It is currently mapped to the Z axis movement in the same way as the first wheel. The mouse is recognized as "MouseMan+", as it is considered to be a variation of MouseMan. - A4 Tech 4D and 4D+ mice. These mice have two wheels! The movement of the second wheel is reported as the Z axis movement in the same way as the first wheel. These mice are recognized as "4D Mouse" and "4D+ Mouse". - Tweak IntelliMouse support code a bit so that less-than-compatible wheel mice can work properly with the psm driver. - Add driver configuration flags which correspond to the kernel options PSM_HOOKRESUME and PSM_RESETAFTERSUSPEND, so that we don't need to recompile the kernel when we need these functions. - Properly keep track of the irq resource. - Add a watchdog timer in case interrupts are lost (experimental). - Add `detach' function (experimental).
2000-03-18 15:21:40 +00:00
}
Add support for the Synaptics Touchpad mouse driver. I reworked the submitted version with style cleanups and changes to comments. I also modified the ioctl interface. This version only has one ioctl (to get the Synaptics-specific config parameters) since this is the only information a user might want. Submitted by: Arne Schwabe <arne -at- rfc2549.org>
2004-07-30 00:59:40 +00:00
/* Synaptics Touchpad */
static int
Rewrite Synaptics touchpads support with the following goals in mind: o better quality of the movement smoothing o more features such as tap-hold and virtual scrolling Support must still be enabled with this line in your /boot/loader.conf: hw.psm.synaptics_support="1" The following sysctls were removed: hw.psm.synaptics.low_speed_threshold hw.psm.synaptics.min_movement hw.psm.synaptics.squelch_level An overview of this new driver and a short documentation about the added sysctls is available on the wiki: http://wiki.freebsd.org/SynapticsTouchpad
2008-10-14 17:48:36 +00:00
synaptics_sysctl(SYSCTL_HANDLER_ARGS)
Add support for the Synaptics Touchpad mouse driver. I reworked the submitted version with style cleanups and changes to comments. I also modified the ioctl interface. This version only has one ioctl (to get the Synaptics-specific config parameters) since this is the only information a user might want. Submitted by: Arne Schwabe <arne -at- rfc2549.org>
2004-07-30 00:59:40 +00:00
{
Rewrite Synaptics touchpads support with the following goals in mind: o better quality of the movement smoothing o more features such as tap-hold and virtual scrolling Support must still be enabled with this line in your /boot/loader.conf: hw.psm.synaptics_support="1" The following sysctls were removed: hw.psm.synaptics.low_speed_threshold hw.psm.synaptics.min_movement hw.psm.synaptics.squelch_level An overview of this new driver and a short documentation about the added sysctls is available on the wiki: http://wiki.freebsd.org/SynapticsTouchpad
2008-10-14 17:48:36 +00:00
int error, arg;
Add support for the Synaptics Touchpad mouse driver. I reworked the submitted version with style cleanups and changes to comments. I also modified the ioctl interface. This version only has one ioctl (to get the Synaptics-specific config parameters) since this is the only information a user might want. Submitted by: Arne Schwabe <arne -at- rfc2549.org>
2004-07-30 00:59:40 +00:00
Rewrite Synaptics touchpads support with the following goals in mind: o better quality of the movement smoothing o more features such as tap-hold and virtual scrolling Support must still be enabled with this line in your /boot/loader.conf: hw.psm.synaptics_support="1" The following sysctls were removed: hw.psm.synaptics.low_speed_threshold hw.psm.synaptics.min_movement hw.psm.synaptics.squelch_level An overview of this new driver and a short documentation about the added sysctls is available on the wiki: http://wiki.freebsd.org/SynapticsTouchpad
2008-10-14 17:48:36 +00:00
/* Read the current value. */
arg = *(int *)oidp->oid_arg1;
error = sysctl_handle_int(oidp, &arg, 0, req);
/* Sanity check. */
if (error || !req->newptr)
return (error);
/*
* Check that the new value is in the concerned node's range
* of values.
*/
switch (oidp->oid_arg2) {
case SYNAPTICS_SYSCTL_MIN_PRESSURE:
case SYNAPTICS_SYSCTL_MAX_PRESSURE:
if (arg < 0 || arg > 255)
return (EINVAL);
break;
case SYNAPTICS_SYSCTL_MAX_WIDTH:
if (arg < 4 || arg > 15)
return (EINVAL);
break;
case SYNAPTICS_SYSCTL_MARGIN_TOP:
case SYNAPTICS_SYSCTL_MARGIN_RIGHT:
case SYNAPTICS_SYSCTL_MARGIN_BOTTOM:
case SYNAPTICS_SYSCTL_MARGIN_LEFT:
case SYNAPTICS_SYSCTL_NA_TOP:
case SYNAPTICS_SYSCTL_NA_RIGHT:
case SYNAPTICS_SYSCTL_NA_BOTTOM:
case SYNAPTICS_SYSCTL_NA_LEFT:
if (arg < 0 || arg > 6143)
return (EINVAL);
break;
case SYNAPTICS_SYSCTL_WINDOW_MIN:
case SYNAPTICS_SYSCTL_WINDOW_MAX:
case SYNAPTICS_SYSCTL_TAP_MIN_QUEUE:
if (arg < 1 || arg > SYNAPTICS_PACKETQUEUE)
return (EINVAL);
break;
case SYNAPTICS_SYSCTL_MULTIPLICATOR:
case SYNAPTICS_SYSCTL_WEIGHT_CURRENT:
case SYNAPTICS_SYSCTL_WEIGHT_PREVIOUS:
case SYNAPTICS_SYSCTL_WEIGHT_PREVIOUS_NA:
case SYNAPTICS_SYSCTL_WEIGHT_LEN_SQUARED:
case SYNAPTICS_SYSCTL_DIV_MIN:
case SYNAPTICS_SYSCTL_DIV_MAX:
case SYNAPTICS_SYSCTL_DIV_MAX_NA:
case SYNAPTICS_SYSCTL_DIV_LEN:
case SYNAPTICS_SYSCTL_VSCROLL_DIV_MIN:
case SYNAPTICS_SYSCTL_VSCROLL_DIV_MAX:
if (arg < 1)
return (EINVAL);
break;
case SYNAPTICS_SYSCTL_TAP_MAX_DELTA:
case SYNAPTICS_SYSCTL_TAPHOLD_TIMEOUT:
case SYNAPTICS_SYSCTL_VSCROLL_MIN_DELTA:
if (arg < 0)
return (EINVAL);
break;
case SYNAPTICS_SYSCTL_VSCROLL_HOR_AREA:
case SYNAPTICS_SYSCTL_VSCROLL_VER_AREA:
if (arg < -6143 || arg > 6143)
return (EINVAL);
break;
Add support for controlling the trackpoint when Synaptics is enabled. To accomplish this, we must put the Synaptics hardware in passthrough mode when talking to the trackpoint. I only performed minor style modifications. Submitted by: Jan Kokemüller <jan.kokemueller at gmail.com> MFC after: 1 week
2015-04-11 18:45:22 +00:00
case SYNAPTICS_SYSCTL_TOUCHPAD_OFF:
if (arg < 0 || arg > 1)
return (EINVAL);
break;
Rewrite Synaptics touchpads support with the following goals in mind: o better quality of the movement smoothing o more features such as tap-hold and virtual scrolling Support must still be enabled with this line in your /boot/loader.conf: hw.psm.synaptics_support="1" The following sysctls were removed: hw.psm.synaptics.low_speed_threshold hw.psm.synaptics.min_movement hw.psm.synaptics.squelch_level An overview of this new driver and a short documentation about the added sysctls is available on the wiki: http://wiki.freebsd.org/SynapticsTouchpad
2008-10-14 17:48:36 +00:00
default:
return (EINVAL);
}
/* Update. */
*(int *)oidp->oid_arg1 = arg;
return (error);
}
static void
synaptics_sysctl_create_tree(struct psm_softc *sc)
{
Introduce a tunable to disable support for Synaptics touchpads. A number of people have reported problems (stickyness, aiming difficulty) which is proving difficult to fix, so this will default to disable until sometime after 5.3R. To enable Synaptics support, set the 'hw.psm.synaptics_support=1' tunable. MT5 candidate. Approved by: njl
2004-09-29 23:49:57 +00:00
Synaptics touchpads must be reinitialized after suspend/resume. This fixes touchpad resume on Asus EeePC among others. Submitted by: rpaulo
2008-12-17 10:42:53 +00:00
if (sc->syninfo.sysctl_tree != NULL)
return;
Clean up and fix style(9) nits.
2008-04-08 19:09:45 +00:00
/* Attach extra synaptics sysctl nodes under hw.psm.synaptics */
sysctl_ctx_init(&sc->syninfo.sysctl_ctx);
sc->syninfo.sysctl_tree = SYSCTL_ADD_NODE(&sc->syninfo.sysctl_ctx,
SYSCTL_STATIC_CHILDREN(_hw_psm), OID_AUTO, "synaptics", CTLFLAG_RD,
0, "Synaptics TouchPad");
Add support for the Synaptics Touchpad mouse driver. I reworked the submitted version with style cleanups and changes to comments. I also modified the ioctl interface. This version only has one ioctl (to get the Synaptics-specific config parameters) since this is the only information a user might want. Submitted by: Arne Schwabe <arne -at- rfc2549.org>
2004-07-30 00:59:40 +00:00
Rewrite Synaptics touchpads support with the following goals in mind: o better quality of the movement smoothing o more features such as tap-hold and virtual scrolling Support must still be enabled with this line in your /boot/loader.conf: hw.psm.synaptics_support="1" The following sysctls were removed: hw.psm.synaptics.low_speed_threshold hw.psm.synaptics.min_movement hw.psm.synaptics.squelch_level An overview of this new driver and a short documentation about the added sysctls is available on the wiki: http://wiki.freebsd.org/SynapticsTouchpad
2008-10-14 17:48:36 +00:00
/* hw.psm.synaptics.directional_scrolls. */
Improve Synaptics support for newer touchpads. Enable two finger scrolling by default and disable the edge scrolling if the touchpad has no physical zone for it. Disable directional scrolling by default to avoid using extended buttons as scroll buttons. Add support for ClickPad. On Lenovo laptops, this is the button reported when one presses the touchpad. While there, fix a problem where the extended buttons were not reporting the button release event correctly: we need to save the state of the buttons and report it to sysmouse until we receive a packet from the touchpad indicating the button has been released. This makes it possible to use an extended button to resize a window. On Lenovo laptops, the major buttons are actually reported as extended buttons. Tested by: many (current@) MFC after: 1 week
2015-04-11 18:44:07 +00:00
sc->syninfo.directional_scrolls = 0;
Clean up and fix style(9) nits.
2008-04-08 19:09:45 +00:00
SYSCTL_ADD_INT(&sc->syninfo.sysctl_ctx,
SYSCTL_CHILDREN(sc->syninfo.sysctl_tree), OID_AUTO,
Rewrite Synaptics touchpads support with the following goals in mind: o better quality of the movement smoothing o more features such as tap-hold and virtual scrolling Support must still be enabled with this line in your /boot/loader.conf: hw.psm.synaptics_support="1" The following sysctls were removed: hw.psm.synaptics.low_speed_threshold hw.psm.synaptics.min_movement hw.psm.synaptics.squelch_level An overview of this new driver and a short documentation about the added sysctls is available on the wiki: http://wiki.freebsd.org/SynapticsTouchpad
2008-10-14 17:48:36 +00:00
"directional_scrolls", CTLFLAG_RW|CTLFLAG_ANYBODY,
Clean up and fix style(9) nits.
2008-04-08 19:09:45 +00:00
&sc->syninfo.directional_scrolls, 0,
Rewrite Synaptics touchpads support with the following goals in mind: o better quality of the movement smoothing o more features such as tap-hold and virtual scrolling Support must still be enabled with this line in your /boot/loader.conf: hw.psm.synaptics_support="1" The following sysctls were removed: hw.psm.synaptics.low_speed_threshold hw.psm.synaptics.min_movement hw.psm.synaptics.squelch_level An overview of this new driver and a short documentation about the added sysctls is available on the wiki: http://wiki.freebsd.org/SynapticsTouchpad
2008-10-14 17:48:36 +00:00
"Enable hardware scrolling pad (if non-zero) or register it as "
Improve Synaptics support for newer touchpads. Enable two finger scrolling by default and disable the edge scrolling if the touchpad has no physical zone for it. Disable directional scrolling by default to avoid using extended buttons as scroll buttons. Add support for ClickPad. On Lenovo laptops, this is the button reported when one presses the touchpad. While there, fix a problem where the extended buttons were not reporting the button release event correctly: we need to save the state of the buttons and report it to sysmouse until we receive a packet from the touchpad indicating the button has been released. This makes it possible to use an extended button to resize a window. On Lenovo laptops, the major buttons are actually reported as extended buttons. Tested by: many (current@) MFC after: 1 week
2015-04-11 18:44:07 +00:00
"extended buttons (if 0)");
/*
* Turn off two finger scroll if we have a
* physical area reserved for scrolling or when
* there's no multi finger support.
*/
synaptics: more support for semi-MT trackpads. Several improvements to the Synaptics driver to support semi-multitouch trackpads and some other fixes: - Two finger scrolling support for "semi-MT" touchpads. Those include many of the older Synaptics touchpads before "true" multitouch support (indicated by capMultiFinger). Semi-MT touchpads can report a second finger position, but the X or Y coordinate may be swapped with some coordinate of the first finger. This is a result of how the hardware works internally. Therefore, all that can be reliably extracted is the bounding box of the two finger positions. Semi-MT touchpads can be recognized by the capAdvancedGestures capability bit. After setting the mode byte, advanced gestures mode has to be enabled. Then, data packets compatible with the capMultiFinger format are sent, so the same two finger scrolling code can be leveraged. Enabling advanced gestures mode on true multitouch touchpads should be harmless. Linux seems to always enable advanced gestures mode. - Put mode setting logic into own functions synaptics_preferred_mode() and synaptics_set_mode() to have this in one place. synaptics_passthrough_on() and synaptics_passthrough_off() currently always use 0xc1 as the mode byte, which may be wrong for touchpads that don't have capExtended. - Expose X and Y resolution of touchpad to userland. Also expose minimum and maximum X and Y coordinates. This is useful for programs in userspace that read raw PSM packets (with PSM_LEVEL_NATIVE enabled) and need to interpret the coordinates. - Also send "extended w mode" packets (see section 3.2.9 of 511-000275-01_RevB.pdf) to userspace if PSM_LEVEL_NATIVE is enabled. This is useful for userspace programs/drivers such as xf86-input-synaptics that can handle these packets. - Fix parsing of nExtendedQueries, and request extended/continued capability bits depending on this value. - capReportsMax, capClearPad, capAdvancedGestures and capCoveredPad must be extracted from status[0] and not status[2], I think. Submitted by: Jan Kokemüller jan.kokemueller at gmail.com
2015-05-10 20:36:57 +00:00
if (sc->synhw.verticalScroll || (sc->synhw.capMultiFinger == 0 &&
sc->synhw.capAdvancedGestures == 0))
Improve Synaptics support for newer touchpads. Enable two finger scrolling by default and disable the edge scrolling if the touchpad has no physical zone for it. Disable directional scrolling by default to avoid using extended buttons as scroll buttons. Add support for ClickPad. On Lenovo laptops, this is the button reported when one presses the touchpad. While there, fix a problem where the extended buttons were not reporting the button release event correctly: we need to save the state of the buttons and report it to sysmouse until we receive a packet from the touchpad indicating the button has been released. This makes it possible to use an extended button to resize a window. On Lenovo laptops, the major buttons are actually reported as extended buttons. Tested by: many (current@) MFC after: 1 week
2015-04-11 18:44:07 +00:00
sc->syninfo.two_finger_scroll = 0;
else
sc->syninfo.two_finger_scroll = 1;
/* hw.psm.synaptics.two_finger_scroll. */
SYSCTL_ADD_INT(&sc->syninfo.sysctl_ctx,
SYSCTL_CHILDREN(sc->syninfo.sysctl_tree), OID_AUTO,
"two_finger_scroll", CTLFLAG_RW|CTLFLAG_ANYBODY,
&sc->syninfo.two_finger_scroll, 0,
"Enable two finger scrolling");
Update support for Synaptics Touchpads (Volume I) o Clean up whitespace and comments in the enable_synaptics() probing function o Only use (and rely on) the extended capability bits when we are told they actually exist o Partly ignore the (possibly dated?) part of the specification about the mode byte so that we can support 'guest devices' too. Tested by: many subscribers to -current Approved by: njl
2004-08-08 00:52:11 +00:00
Rewrite Synaptics touchpads support with the following goals in mind: o better quality of the movement smoothing o more features such as tap-hold and virtual scrolling Support must still be enabled with this line in your /boot/loader.conf: hw.psm.synaptics_support="1" The following sysctls were removed: hw.psm.synaptics.low_speed_threshold hw.psm.synaptics.min_movement hw.psm.synaptics.squelch_level An overview of this new driver and a short documentation about the added sysctls is available on the wiki: http://wiki.freebsd.org/SynapticsTouchpad
2008-10-14 17:48:36 +00:00
/* hw.psm.synaptics.min_pressure. */
sc->syninfo.min_pressure = 16;
SYSCTL_ADD_PROC(&sc->syninfo.sysctl_ctx,
Clean up and fix style(9) nits.
2008-04-08 19:09:45 +00:00
SYSCTL_CHILDREN(sc->syninfo.sysctl_tree), OID_AUTO,
Rewrite Synaptics touchpads support with the following goals in mind: o better quality of the movement smoothing o more features such as tap-hold and virtual scrolling Support must still be enabled with this line in your /boot/loader.conf: hw.psm.synaptics_support="1" The following sysctls were removed: hw.psm.synaptics.low_speed_threshold hw.psm.synaptics.min_movement hw.psm.synaptics.squelch_level An overview of this new driver and a short documentation about the added sysctls is available on the wiki: http://wiki.freebsd.org/SynapticsTouchpad
2008-10-14 17:48:36 +00:00
"min_pressure", CTLTYPE_INT|CTLFLAG_RW|CTLFLAG_ANYBODY,
&sc->syninfo.min_pressure, SYNAPTICS_SYSCTL_MIN_PRESSURE,
synaptics_sysctl, "I",
"Minimum pressure required to start an action");
/* hw.psm.synaptics.max_pressure. */
sc->syninfo.max_pressure = 220;
SYSCTL_ADD_PROC(&sc->syninfo.sysctl_ctx,
Clean up and fix style(9) nits.
2008-04-08 19:09:45 +00:00
SYSCTL_CHILDREN(sc->syninfo.sysctl_tree), OID_AUTO,
Rewrite Synaptics touchpads support with the following goals in mind: o better quality of the movement smoothing o more features such as tap-hold and virtual scrolling Support must still be enabled with this line in your /boot/loader.conf: hw.psm.synaptics_support="1" The following sysctls were removed: hw.psm.synaptics.low_speed_threshold hw.psm.synaptics.min_movement hw.psm.synaptics.squelch_level An overview of this new driver and a short documentation about the added sysctls is available on the wiki: http://wiki.freebsd.org/SynapticsTouchpad
2008-10-14 17:48:36 +00:00
"max_pressure", CTLTYPE_INT|CTLFLAG_RW|CTLFLAG_ANYBODY,
&sc->syninfo.max_pressure, SYNAPTICS_SYSCTL_MAX_PRESSURE,
synaptics_sysctl, "I",
"Maximum pressure to detect palm");
/* hw.psm.synaptics.max_width. */
sc->syninfo.max_width = 10;
SYSCTL_ADD_PROC(&sc->syninfo.sysctl_ctx,
SYSCTL_CHILDREN(sc->syninfo.sysctl_tree), OID_AUTO,
"max_width", CTLTYPE_INT|CTLFLAG_RW|CTLFLAG_ANYBODY,
&sc->syninfo.max_width, SYNAPTICS_SYSCTL_MAX_WIDTH,
synaptics_sysctl, "I",
"Maximum finger width to detect palm");
/* hw.psm.synaptics.top_margin. */
sc->syninfo.margin_top = 200;
SYSCTL_ADD_PROC(&sc->syninfo.sysctl_ctx,
SYSCTL_CHILDREN(sc->syninfo.sysctl_tree), OID_AUTO,
"margin_top", CTLTYPE_INT|CTLFLAG_RW|CTLFLAG_ANYBODY,
&sc->syninfo.margin_top, SYNAPTICS_SYSCTL_MARGIN_TOP,
synaptics_sysctl, "I",
"Top margin");
/* hw.psm.synaptics.right_margin. */
sc->syninfo.margin_right = 200;
SYSCTL_ADD_PROC(&sc->syninfo.sysctl_ctx,
SYSCTL_CHILDREN(sc->syninfo.sysctl_tree), OID_AUTO,
"margin_right", CTLTYPE_INT|CTLFLAG_RW|CTLFLAG_ANYBODY,
&sc->syninfo.margin_right, SYNAPTICS_SYSCTL_MARGIN_RIGHT,
synaptics_sysctl, "I",
"Right margin");
/* hw.psm.synaptics.bottom_margin. */
sc->syninfo.margin_bottom = 200;
SYSCTL_ADD_PROC(&sc->syninfo.sysctl_ctx,
SYSCTL_CHILDREN(sc->syninfo.sysctl_tree), OID_AUTO,
"margin_bottom", CTLTYPE_INT|CTLFLAG_RW|CTLFLAG_ANYBODY,
&sc->syninfo.margin_bottom, SYNAPTICS_SYSCTL_MARGIN_BOTTOM,
synaptics_sysctl, "I",
"Bottom margin");
/* hw.psm.synaptics.left_margin. */
sc->syninfo.margin_left = 200;
SYSCTL_ADD_PROC(&sc->syninfo.sysctl_ctx,
SYSCTL_CHILDREN(sc->syninfo.sysctl_tree), OID_AUTO,
"margin_left", CTLTYPE_INT|CTLFLAG_RW|CTLFLAG_ANYBODY,
&sc->syninfo.margin_left, SYNAPTICS_SYSCTL_MARGIN_LEFT,
synaptics_sysctl, "I",
"Left margin");
/* hw.psm.synaptics.na_top. */
sc->syninfo.na_top = 1783;
SYSCTL_ADD_PROC(&sc->syninfo.sysctl_ctx,
SYSCTL_CHILDREN(sc->syninfo.sysctl_tree), OID_AUTO,
"na_top", CTLTYPE_INT|CTLFLAG_RW|CTLFLAG_ANYBODY,
&sc->syninfo.na_top, SYNAPTICS_SYSCTL_NA_TOP,
synaptics_sysctl, "I",
"Top noisy area, where weight_previous_na is used instead "
"of weight_previous");
/* hw.psm.synaptics.na_right. */
sc->syninfo.na_right = 563;
SYSCTL_ADD_PROC(&sc->syninfo.sysctl_ctx,
SYSCTL_CHILDREN(sc->syninfo.sysctl_tree), OID_AUTO,
"na_right", CTLTYPE_INT|CTLFLAG_RW|CTLFLAG_ANYBODY,
&sc->syninfo.na_right, SYNAPTICS_SYSCTL_NA_RIGHT,
synaptics_sysctl, "I",
"Right noisy area, where weight_previous_na is used instead "
"of weight_previous");
/* hw.psm.synaptics.na_bottom. */
sc->syninfo.na_bottom = 1408;
SYSCTL_ADD_PROC(&sc->syninfo.sysctl_ctx,
SYSCTL_CHILDREN(sc->syninfo.sysctl_tree), OID_AUTO,
"na_bottom", CTLTYPE_INT|CTLFLAG_RW|CTLFLAG_ANYBODY,
&sc->syninfo.na_bottom, SYNAPTICS_SYSCTL_NA_BOTTOM,
synaptics_sysctl, "I",
"Bottom noisy area, where weight_previous_na is used instead "
"of weight_previous");
/* hw.psm.synaptics.na_left. */
sc->syninfo.na_left = 1600;
SYSCTL_ADD_PROC(&sc->syninfo.sysctl_ctx,
SYSCTL_CHILDREN(sc->syninfo.sysctl_tree), OID_AUTO,
"na_left", CTLTYPE_INT|CTLFLAG_RW|CTLFLAG_ANYBODY,
&sc->syninfo.na_left, SYNAPTICS_SYSCTL_NA_LEFT,
synaptics_sysctl, "I",
"Left noisy area, where weight_previous_na is used instead "
"of weight_previous");
/* hw.psm.synaptics.window_min. */
sc->syninfo.window_min = 4;
SYSCTL_ADD_PROC(&sc->syninfo.sysctl_ctx,
SYSCTL_CHILDREN(sc->syninfo.sysctl_tree), OID_AUTO,
"window_min", CTLTYPE_INT|CTLFLAG_RW|CTLFLAG_ANYBODY,
&sc->syninfo.window_min, SYNAPTICS_SYSCTL_WINDOW_MIN,
synaptics_sysctl, "I",
"Minimum window size to start an action");
/* hw.psm.synaptics.window_max. */
sc->syninfo.window_max = 10;
SYSCTL_ADD_PROC(&sc->syninfo.sysctl_ctx,
SYSCTL_CHILDREN(sc->syninfo.sysctl_tree), OID_AUTO,
"window_max", CTLTYPE_INT|CTLFLAG_RW|CTLFLAG_ANYBODY,
&sc->syninfo.window_max, SYNAPTICS_SYSCTL_WINDOW_MAX,
synaptics_sysctl, "I",
"Maximum window size");
/* hw.psm.synaptics.multiplicator. */
sc->syninfo.multiplicator = 10000;
SYSCTL_ADD_PROC(&sc->syninfo.sysctl_ctx,
SYSCTL_CHILDREN(sc->syninfo.sysctl_tree), OID_AUTO,
"multiplicator", CTLTYPE_INT|CTLFLAG_RW|CTLFLAG_ANYBODY,
&sc->syninfo.multiplicator, SYNAPTICS_SYSCTL_MULTIPLICATOR,
synaptics_sysctl, "I",
"Multiplicator to increase precision in averages and divisions");
/* hw.psm.synaptics.weight_current. */
sc->syninfo.weight_current = 3;
SYSCTL_ADD_PROC(&sc->syninfo.sysctl_ctx,
SYSCTL_CHILDREN(sc->syninfo.sysctl_tree), OID_AUTO,
"weight_current", CTLTYPE_INT|CTLFLAG_RW|CTLFLAG_ANYBODY,
&sc->syninfo.weight_current, SYNAPTICS_SYSCTL_WEIGHT_CURRENT,
synaptics_sysctl, "I",
"Weight of the current movement in the new average");
/* hw.psm.synaptics.weight_previous. */
sc->syninfo.weight_previous = 6;
SYSCTL_ADD_PROC(&sc->syninfo.sysctl_ctx,
SYSCTL_CHILDREN(sc->syninfo.sysctl_tree), OID_AUTO,
"weight_previous", CTLTYPE_INT|CTLFLAG_RW|CTLFLAG_ANYBODY,
&sc->syninfo.weight_previous, SYNAPTICS_SYSCTL_WEIGHT_PREVIOUS,
synaptics_sysctl, "I",
"Weight of the previous average");
/* hw.psm.synaptics.weight_previous_na. */
sc->syninfo.weight_previous_na = 20;
SYSCTL_ADD_PROC(&sc->syninfo.sysctl_ctx,
Clean up and fix style(9) nits.
2008-04-08 19:09:45 +00:00
SYSCTL_CHILDREN(sc->syninfo.sysctl_tree), OID_AUTO,
Rewrite Synaptics touchpads support with the following goals in mind: o better quality of the movement smoothing o more features such as tap-hold and virtual scrolling Support must still be enabled with this line in your /boot/loader.conf: hw.psm.synaptics_support="1" The following sysctls were removed: hw.psm.synaptics.low_speed_threshold hw.psm.synaptics.min_movement hw.psm.synaptics.squelch_level An overview of this new driver and a short documentation about the added sysctls is available on the wiki: http://wiki.freebsd.org/SynapticsTouchpad
2008-10-14 17:48:36 +00:00
"weight_previous_na", CTLTYPE_INT|CTLFLAG_RW|CTLFLAG_ANYBODY,
&sc->syninfo.weight_previous_na,
SYNAPTICS_SYSCTL_WEIGHT_PREVIOUS_NA,
synaptics_sysctl, "I",
"Weight of the previous average (inside the noisy area)");
/* hw.psm.synaptics.weight_len_squared. */
sc->syninfo.weight_len_squared = 2000;
SYSCTL_ADD_PROC(&sc->syninfo.sysctl_ctx,
SYSCTL_CHILDREN(sc->syninfo.sysctl_tree), OID_AUTO,
"weight_len_squared", CTLTYPE_INT|CTLFLAG_RW|CTLFLAG_ANYBODY,
&sc->syninfo.weight_len_squared,
SYNAPTICS_SYSCTL_WEIGHT_LEN_SQUARED,
synaptics_sysctl, "I",
"Length (squared) of segments where weight_previous "
"starts to decrease");
/* hw.psm.synaptics.div_min. */
sc->syninfo.div_min = 9;
SYSCTL_ADD_PROC(&sc->syninfo.sysctl_ctx,
SYSCTL_CHILDREN(sc->syninfo.sysctl_tree), OID_AUTO,
"div_min", CTLTYPE_INT|CTLFLAG_RW|CTLFLAG_ANYBODY,
&sc->syninfo.div_min, SYNAPTICS_SYSCTL_DIV_MIN,
synaptics_sysctl, "I",
"Divisor for fast movements");
/* hw.psm.synaptics.div_max. */
sc->syninfo.div_max = 17;
SYSCTL_ADD_PROC(&sc->syninfo.sysctl_ctx,
SYSCTL_CHILDREN(sc->syninfo.sysctl_tree), OID_AUTO,
"div_max", CTLTYPE_INT|CTLFLAG_RW|CTLFLAG_ANYBODY,
&sc->syninfo.div_max, SYNAPTICS_SYSCTL_DIV_MAX,
synaptics_sysctl, "I",
"Divisor for slow movements");
/* hw.psm.synaptics.div_max_na. */
sc->syninfo.div_max_na = 30;
SYSCTL_ADD_PROC(&sc->syninfo.sysctl_ctx,
SYSCTL_CHILDREN(sc->syninfo.sysctl_tree), OID_AUTO,
"div_max_na", CTLTYPE_INT|CTLFLAG_RW|CTLFLAG_ANYBODY,
&sc->syninfo.div_max_na, SYNAPTICS_SYSCTL_DIV_MAX_NA,
synaptics_sysctl, "I",
"Divisor with slow movements (inside the noisy area)");
/* hw.psm.synaptics.div_len. */
sc->syninfo.div_len = 100;
SYSCTL_ADD_PROC(&sc->syninfo.sysctl_ctx,
SYSCTL_CHILDREN(sc->syninfo.sysctl_tree), OID_AUTO,
"div_len", CTLTYPE_INT|CTLFLAG_RW|CTLFLAG_ANYBODY,
&sc->syninfo.div_len, SYNAPTICS_SYSCTL_DIV_LEN,
synaptics_sysctl, "I",
"Length of segments where div_max starts to decrease");
/* hw.psm.synaptics.tap_max_delta. */
sc->syninfo.tap_max_delta = 80;
SYSCTL_ADD_PROC(&sc->syninfo.sysctl_ctx,
SYSCTL_CHILDREN(sc->syninfo.sysctl_tree), OID_AUTO,
"tap_max_delta", CTLTYPE_INT|CTLFLAG_RW|CTLFLAG_ANYBODY,
&sc->syninfo.tap_max_delta, SYNAPTICS_SYSCTL_TAP_MAX_DELTA,
synaptics_sysctl, "I",
"Length of segments above which a tap is ignored");
/* hw.psm.synaptics.tap_min_queue. */
sc->syninfo.tap_min_queue = 2;
SYSCTL_ADD_PROC(&sc->syninfo.sysctl_ctx,
SYSCTL_CHILDREN(sc->syninfo.sysctl_tree), OID_AUTO,
"tap_min_queue", CTLTYPE_INT|CTLFLAG_RW|CTLFLAG_ANYBODY,
&sc->syninfo.tap_min_queue, SYNAPTICS_SYSCTL_TAP_MIN_QUEUE,
synaptics_sysctl, "I",
"Number of packets required to consider a tap");
/* hw.psm.synaptics.taphold_timeout. */
sc->synaction.in_taphold = 0;
sc->syninfo.taphold_timeout = tap_timeout;
SYSCTL_ADD_PROC(&sc->syninfo.sysctl_ctx,
SYSCTL_CHILDREN(sc->syninfo.sysctl_tree), OID_AUTO,
"taphold_timeout", CTLTYPE_INT|CTLFLAG_RW|CTLFLAG_ANYBODY,
&sc->syninfo.taphold_timeout, SYNAPTICS_SYSCTL_TAPHOLD_TIMEOUT,
synaptics_sysctl, "I",
"Maximum elapsed time between two taps to consider a tap-hold "
"action");
/* hw.psm.synaptics.vscroll_hor_area. */
sc->syninfo.vscroll_hor_area = 0; /* 1300 */
SYSCTL_ADD_PROC(&sc->syninfo.sysctl_ctx,
SYSCTL_CHILDREN(sc->syninfo.sysctl_tree), OID_AUTO,
"vscroll_hor_area", CTLTYPE_INT|CTLFLAG_RW|CTLFLAG_ANYBODY,
&sc->syninfo.vscroll_hor_area, SYNAPTICS_SYSCTL_VSCROLL_HOR_AREA,
synaptics_sysctl, "I",
"Area reserved for horizontal virtual scrolling");
/* hw.psm.synaptics.vscroll_ver_area. */
sc->syninfo.vscroll_ver_area = -600;
SYSCTL_ADD_PROC(&sc->syninfo.sysctl_ctx,
SYSCTL_CHILDREN(sc->syninfo.sysctl_tree), OID_AUTO,
"vscroll_ver_area", CTLTYPE_INT|CTLFLAG_RW|CTLFLAG_ANYBODY,
&sc->syninfo.vscroll_ver_area, SYNAPTICS_SYSCTL_VSCROLL_VER_AREA,
synaptics_sysctl, "I",
"Area reserved for vertical virtual scrolling");
/* hw.psm.synaptics.vscroll_min_delta. */
sc->syninfo.vscroll_min_delta = 50;
SYSCTL_ADD_PROC(&sc->syninfo.sysctl_ctx,
SYSCTL_CHILDREN(sc->syninfo.sysctl_tree), OID_AUTO,
"vscroll_min_delta", CTLTYPE_INT|CTLFLAG_RW|CTLFLAG_ANYBODY,
&sc->syninfo.vscroll_min_delta,
SYNAPTICS_SYSCTL_VSCROLL_MIN_DELTA,
synaptics_sysctl, "I",
"Minimum movement to consider virtual scrolling");
/* hw.psm.synaptics.vscroll_div_min. */
sc->syninfo.vscroll_div_min = 100;
SYSCTL_ADD_PROC(&sc->syninfo.sysctl_ctx,
SYSCTL_CHILDREN(sc->syninfo.sysctl_tree), OID_AUTO,
"vscroll_div_min", CTLTYPE_INT|CTLFLAG_RW|CTLFLAG_ANYBODY,
&sc->syninfo.vscroll_div_min, SYNAPTICS_SYSCTL_VSCROLL_DIV_MIN,
synaptics_sysctl, "I",
"Divisor for fast scrolling");
/* hw.psm.synaptics.vscroll_div_min. */
sc->syninfo.vscroll_div_max = 150;
SYSCTL_ADD_PROC(&sc->syninfo.sysctl_ctx,
SYSCTL_CHILDREN(sc->syninfo.sysctl_tree), OID_AUTO,
"vscroll_div_max", CTLTYPE_INT|CTLFLAG_RW|CTLFLAG_ANYBODY,
&sc->syninfo.vscroll_div_max, SYNAPTICS_SYSCTL_VSCROLL_DIV_MAX,
synaptics_sysctl, "I",
"Divisor for slow scrolling");
Add support for controlling the trackpoint when Synaptics is enabled. To accomplish this, we must put the Synaptics hardware in passthrough mode when talking to the trackpoint. I only performed minor style modifications. Submitted by: Jan Kokemüller <jan.kokemueller at gmail.com> MFC after: 1 week
2015-04-11 18:45:22 +00:00
/* hw.psm.synaptics.touchpad_off. */
sc->syninfo.touchpad_off = 0;
SYSCTL_ADD_PROC(&sc->syninfo.sysctl_ctx,
SYSCTL_CHILDREN(sc->syninfo.sysctl_tree), OID_AUTO,
"touchpad_off", CTLTYPE_INT|CTLFLAG_RW|CTLFLAG_ANYBODY,
&sc->syninfo.touchpad_off, SYNAPTICS_SYSCTL_TOUCHPAD_OFF,
synaptics_sysctl, "I",
"Turn off touchpad");
Rewrite Synaptics touchpads support with the following goals in mind: o better quality of the movement smoothing o more features such as tap-hold and virtual scrolling Support must still be enabled with this line in your /boot/loader.conf: hw.psm.synaptics_support="1" The following sysctls were removed: hw.psm.synaptics.low_speed_threshold hw.psm.synaptics.min_movement hw.psm.synaptics.squelch_level An overview of this new driver and a short documentation about the added sysctls is available on the wiki: http://wiki.freebsd.org/SynapticsTouchpad
2008-10-14 17:48:36 +00:00
}
synaptics: more support for semi-MT trackpads. Several improvements to the Synaptics driver to support semi-multitouch trackpads and some other fixes: - Two finger scrolling support for "semi-MT" touchpads. Those include many of the older Synaptics touchpads before "true" multitouch support (indicated by capMultiFinger). Semi-MT touchpads can report a second finger position, but the X or Y coordinate may be swapped with some coordinate of the first finger. This is a result of how the hardware works internally. Therefore, all that can be reliably extracted is the bounding box of the two finger positions. Semi-MT touchpads can be recognized by the capAdvancedGestures capability bit. After setting the mode byte, advanced gestures mode has to be enabled. Then, data packets compatible with the capMultiFinger format are sent, so the same two finger scrolling code can be leveraged. Enabling advanced gestures mode on true multitouch touchpads should be harmless. Linux seems to always enable advanced gestures mode. - Put mode setting logic into own functions synaptics_preferred_mode() and synaptics_set_mode() to have this in one place. synaptics_passthrough_on() and synaptics_passthrough_off() currently always use 0xc1 as the mode byte, which may be wrong for touchpads that don't have capExtended. - Expose X and Y resolution of touchpad to userland. Also expose minimum and maximum X and Y coordinates. This is useful for programs in userspace that read raw PSM packets (with PSM_LEVEL_NATIVE enabled) and need to interpret the coordinates. - Also send "extended w mode" packets (see section 3.2.9 of 511-000275-01_RevB.pdf) to userspace if PSM_LEVEL_NATIVE is enabled. This is useful for userspace programs/drivers such as xf86-input-synaptics that can handle these packets. - Fix parsing of nExtendedQueries, and request extended/continued capability bits depending on this value. - capReportsMax, capClearPad, capAdvancedGestures and capCoveredPad must be extracted from status[0] and not status[2], I think. Submitted by: Jan Kokemüller jan.kokemueller at gmail.com
2015-05-10 20:36:57 +00:00
static int
synaptics_preferred_mode(struct psm_softc *sc) {
int mode_byte;
mode_byte = 0xc0;
/* request wmode where available */
if (sc->synhw.capExtended)
mode_byte |= 1;
/*
* Disable gesture processing when native packets are requested. This
* enables sending of encapsulated "extended W mode" packets.
*/
if (sc->mode.level == PSM_LEVEL_NATIVE)
mode_byte |= (1 << 2);
return mode_byte;
}
static void
synaptics_set_mode(struct psm_softc *sc, int mode_byte) {
mouse_ext_command(sc->kbdc, mode_byte);
/* "Commit" the Set Mode Byte command sent above. */
set_mouse_sampling_rate(sc->kbdc, 20);
/*
* Enable advanced gestures mode if supported and we are not entering
* passthrough mode.
*/
if (sc->synhw.capAdvancedGestures && !(mode_byte & (1 << 5))) {
mouse_ext_command(sc->kbdc, 3);
set_mouse_sampling_rate(sc->kbdc, 0xc8);
}
}
Rewrite Synaptics touchpads support with the following goals in mind: o better quality of the movement smoothing o more features such as tap-hold and virtual scrolling Support must still be enabled with this line in your /boot/loader.conf: hw.psm.synaptics_support="1" The following sysctls were removed: hw.psm.synaptics.low_speed_threshold hw.psm.synaptics.min_movement hw.psm.synaptics.squelch_level An overview of this new driver and a short documentation about the added sysctls is available on the wiki: http://wiki.freebsd.org/SynapticsTouchpad
2008-10-14 17:48:36 +00:00
static int
Unbreak mouse on resume on Thinkpads when hw.psm.trackpoint_support=0, which is default. It was broken in r281441. It appears that set_trackpoint_parameters() call on resume disables the mouse. So, we need not call it on resume if hw.psm.trackpoint_support=0. The problem is that the probe functions are used both for probing and for reiniting on resume. And the absense of the softc parameter is used as a mark to distinguish reinit and probe, which is quite ugly. At the same time the softc parameter is needed to call set_trackpoint_parameters(). o Change the arguments of probefunc_t to always supply the softc, and use additional enum argument to tell probing from initing. o Don't call set_trackpoint_parameters() from global doinitialize(), instead call it from the enable_trackpoint() only. o In enable_synaptics() call enable_trackpoint() in both probe and reinit cases. Together with: Jan Kokemüller <jan.kokemueller gmail.com>
2015-06-12 13:57:04 +00:00
enable_synaptics(struct psm_softc *sc, enum probearg arg)
Rewrite Synaptics touchpads support with the following goals in mind: o better quality of the movement smoothing o more features such as tap-hold and virtual scrolling Support must still be enabled with this line in your /boot/loader.conf: hw.psm.synaptics_support="1" The following sysctls were removed: hw.psm.synaptics.low_speed_threshold hw.psm.synaptics.min_movement hw.psm.synaptics.squelch_level An overview of this new driver and a short documentation about the added sysctls is available on the wiki: http://wiki.freebsd.org/SynapticsTouchpad
2008-10-14 17:48:36 +00:00
{
Unbreak mouse on resume on Thinkpads when hw.psm.trackpoint_support=0, which is default. It was broken in r281441. It appears that set_trackpoint_parameters() call on resume disables the mouse. So, we need not call it on resume if hw.psm.trackpoint_support=0. The problem is that the probe functions are used both for probing and for reiniting on resume. And the absense of the softc parameter is used as a mark to distinguish reinit and probe, which is quite ugly. At the same time the softc parameter is needed to call set_trackpoint_parameters(). o Change the arguments of probefunc_t to always supply the softc, and use additional enum argument to tell probing from initing. o Don't call set_trackpoint_parameters() from global doinitialize(), instead call it from the enable_trackpoint() only. o In enable_synaptics() call enable_trackpoint() in both probe and reinit cases. Together with: Jan Kokemüller <jan.kokemueller gmail.com>
2015-06-12 13:57:04 +00:00
KBDC kbdc = sc->kbdc;
- Do not clobber softc when psm(4) is reintialized. - Make INITAFTERSUSPEND flag independent of HOOKRESUME flag. - Automatically set INITAFTERSUSPEND flag when ALPS GlidePoint is detected. - Always probe Synaptics Touchpad. Allow MOUSE_SYN_GETHWINFO ioctl and automatically set INITAFTERSUSPEND flag when a supported device is detected, regardless of "hw.psm.synaptics_support" tunable setting. - Update psm(4) to reflect the above changes. - Remove long-time defunct SYNCHACK flag while I am in the neighborhood. MFC after: 1 month
2012-03-27 23:43:01 +00:00
synapticshw_t synhw;
Rewrite Synaptics touchpads support with the following goals in mind: o better quality of the movement smoothing o more features such as tap-hold and virtual scrolling Support must still be enabled with this line in your /boot/loader.conf: hw.psm.synaptics_support="1" The following sysctls were removed: hw.psm.synaptics.low_speed_threshold hw.psm.synaptics.min_movement hw.psm.synaptics.squelch_level An overview of this new driver and a short documentation about the added sysctls is available on the wiki: http://wiki.freebsd.org/SynapticsTouchpad
2008-10-14 17:48:36 +00:00
int status[3];
- Do not clobber softc when psm(4) is reintialized. - Make INITAFTERSUSPEND flag independent of HOOKRESUME flag. - Automatically set INITAFTERSUSPEND flag when ALPS GlidePoint is detected. - Always probe Synaptics Touchpad. Allow MOUSE_SYN_GETHWINFO ioctl and automatically set INITAFTERSUSPEND flag when a supported device is detected, regardless of "hw.psm.synaptics_support" tunable setting. - Update psm(4) to reflect the above changes. - Remove long-time defunct SYNCHACK flag while I am in the neighborhood. MFC after: 1 month
2012-03-27 23:43:01 +00:00
int buttons;
Rewrite Synaptics touchpads support with the following goals in mind: o better quality of the movement smoothing o more features such as tap-hold and virtual scrolling Support must still be enabled with this line in your /boot/loader.conf: hw.psm.synaptics_support="1" The following sysctls were removed: hw.psm.synaptics.low_speed_threshold hw.psm.synaptics.min_movement hw.psm.synaptics.squelch_level An overview of this new driver and a short documentation about the added sysctls is available on the wiki: http://wiki.freebsd.org/SynapticsTouchpad
2008-10-14 17:48:36 +00:00
VLOG(3, (LOG_DEBUG, "synaptics: BEGIN init\n"));
Clean up and fix style(9) nits.
2008-04-08 19:09:45 +00:00
Rephrase and/or fix some comments in Synaptics touchpad initialization function.
2008-12-16 09:51:13 +00:00
/*
* Just to be on the safe side: this avoids troubles with
* following mouse_ext_command() when the previous command
* was PSMC_SET_RESOLUTION. Set Scaling has no effect on
* Synaptics Touchpad behaviour.
*/
Clean up and fix style(9) nits.
2008-04-08 19:09:45 +00:00
set_mouse_scaling(kbdc, 1);
Rephrase and/or fix some comments in Synaptics touchpad initialization function.
2008-12-16 09:51:13 +00:00
/* Identify the Touchpad version. */
Clean up and fix style(9) nits.
2008-04-08 19:09:45 +00:00
if (mouse_ext_command(kbdc, 0) == 0)
return (FALSE);
if (get_mouse_status(kbdc, status, 0, 3) != 3)
return (FALSE);
if (status[1] != 0x47)
return (FALSE);
- Do not clobber softc when psm(4) is reintialized. - Make INITAFTERSUSPEND flag independent of HOOKRESUME flag. - Automatically set INITAFTERSUSPEND flag when ALPS GlidePoint is detected. - Always probe Synaptics Touchpad. Allow MOUSE_SYN_GETHWINFO ioctl and automatically set INITAFTERSUSPEND flag when a supported device is detected, regardless of "hw.psm.synaptics_support" tunable setting. - Update psm(4) to reflect the above changes. - Remove long-time defunct SYNCHACK flag while I am in the neighborhood. MFC after: 1 month
2012-03-27 23:43:01 +00:00
bzero(&synhw, sizeof(synhw));
synhw.infoMinor = status[0];
synhw.infoMajor = status[2] & 0x0f;
Clean up and fix style(9) nits.
2008-04-08 19:09:45 +00:00
if (verbose >= 2)
- Do not clobber softc when psm(4) is reintialized. - Make INITAFTERSUSPEND flag independent of HOOKRESUME flag. - Automatically set INITAFTERSUSPEND flag when ALPS GlidePoint is detected. - Always probe Synaptics Touchpad. Allow MOUSE_SYN_GETHWINFO ioctl and automatically set INITAFTERSUSPEND flag when a supported device is detected, regardless of "hw.psm.synaptics_support" tunable setting. - Update psm(4) to reflect the above changes. - Remove long-time defunct SYNCHACK flag while I am in the neighborhood. MFC after: 1 month
2012-03-27 23:43:01 +00:00
printf("Synaptics Touchpad v%d.%d\n", synhw.infoMajor,
synhw.infoMinor);
Clean up and fix style(9) nits.
2008-04-08 19:09:45 +00:00
- Do not clobber softc when psm(4) is reintialized. - Make INITAFTERSUSPEND flag independent of HOOKRESUME flag. - Automatically set INITAFTERSUSPEND flag when ALPS GlidePoint is detected. - Always probe Synaptics Touchpad. Allow MOUSE_SYN_GETHWINFO ioctl and automatically set INITAFTERSUSPEND flag when a supported device is detected, regardless of "hw.psm.synaptics_support" tunable setting. - Update psm(4) to reflect the above changes. - Remove long-time defunct SYNCHACK flag while I am in the neighborhood. MFC after: 1 month
2012-03-27 23:43:01 +00:00
if (synhw.infoMajor < 4) {
Clean up and fix style(9) nits.
2008-04-08 19:09:45 +00:00
printf(" Unsupported (pre-v4) Touchpad detected\n");
return (FALSE);
}
Rephrase and/or fix some comments in Synaptics touchpad initialization function.
2008-12-16 09:51:13 +00:00
/* Get the Touchpad model information. */
Clean up and fix style(9) nits.
2008-04-08 19:09:45 +00:00
if (mouse_ext_command(kbdc, 3) == 0)
return (FALSE);
if (get_mouse_status(kbdc, status, 0, 3) != 3)
return (FALSE);
if ((status[1] & 0x01) != 0) {
printf(" Failed to read model information\n");
return (FALSE);
}
- Do not clobber softc when psm(4) is reintialized. - Make INITAFTERSUSPEND flag independent of HOOKRESUME flag. - Automatically set INITAFTERSUSPEND flag when ALPS GlidePoint is detected. - Always probe Synaptics Touchpad. Allow MOUSE_SYN_GETHWINFO ioctl and automatically set INITAFTERSUSPEND flag when a supported device is detected, regardless of "hw.psm.synaptics_support" tunable setting. - Update psm(4) to reflect the above changes. - Remove long-time defunct SYNCHACK flag while I am in the neighborhood. MFC after: 1 month
2012-03-27 23:43:01 +00:00
synhw.infoRot180 = (status[0] & 0x80) != 0;
synhw.infoPortrait = (status[0] & 0x40) != 0;
synhw.infoSensor = status[0] & 0x3f;
synhw.infoHardware = (status[1] & 0xfe) >> 1;
synhw.infoNewAbs = (status[2] & 0x80) != 0;
synhw.capPen = (status[2] & 0x40) != 0;
synhw.infoSimplC = (status[2] & 0x20) != 0;
synhw.infoGeometry = status[2] & 0x0f;
Add support for the Synaptics Touchpad mouse driver. I reworked the submitted version with style cleanups and changes to comments. I also modified the ioctl interface. This version only has one ioctl (to get the Synaptics-specific config parameters) since this is the only information a user might want. Submitted by: Arne Schwabe <arne -at- rfc2549.org>
2004-07-30 00:59:40 +00:00
Update support for Synaptics Touchpads (Volume I) o Clean up whitespace and comments in the enable_synaptics() probing function o Only use (and rely on) the extended capability bits when we are told they actually exist o Partly ignore the (possibly dated?) part of the specification about the mode byte so that we can support 'guest devices' too. Tested by: many subscribers to -current Approved by: njl
2004-08-08 00:52:11 +00:00
if (verbose >= 2) {
Clean up and fix style(9) nits.
2008-04-08 19:09:45 +00:00
printf(" Model information:\n");
- Do not clobber softc when psm(4) is reintialized. - Make INITAFTERSUSPEND flag independent of HOOKRESUME flag. - Automatically set INITAFTERSUSPEND flag when ALPS GlidePoint is detected. - Always probe Synaptics Touchpad. Allow MOUSE_SYN_GETHWINFO ioctl and automatically set INITAFTERSUSPEND flag when a supported device is detected, regardless of "hw.psm.synaptics_support" tunable setting. - Update psm(4) to reflect the above changes. - Remove long-time defunct SYNCHACK flag while I am in the neighborhood. MFC after: 1 month
2012-03-27 23:43:01 +00:00
printf(" infoRot180: %d\n", synhw.infoRot180);
printf(" infoPortrait: %d\n", synhw.infoPortrait);
printf(" infoSensor: %d\n", synhw.infoSensor);
printf(" infoHardware: %d\n", synhw.infoHardware);
printf(" infoNewAbs: %d\n", synhw.infoNewAbs);
printf(" capPen: %d\n", synhw.capPen);
printf(" infoSimplC: %d\n", synhw.infoSimplC);
printf(" infoGeometry: %d\n", synhw.infoGeometry);
Clean up and fix style(9) nits.
2008-04-08 19:09:45 +00:00
}
Rephrase and/or fix some comments in Synaptics touchpad initialization function.
2008-12-16 09:51:13 +00:00
/* Read the extended capability bits. */
Clean up and fix style(9) nits.
2008-04-08 19:09:45 +00:00
if (mouse_ext_command(kbdc, 2) == 0)
return (FALSE);
if (get_mouse_status(kbdc, status, 0, 3) != 3)
return (FALSE);
psm: Support detection of Synaptics touchpad v7.5 and above Starting with firmware v7.5, the "Read TouchPad Modes" ($01) and "Read Capabilities" ($02) commands changed: previously constant bytes now carry variable information. We now compare those bytes to expected constants only for firmware prior to v7.5. Tested by: Zeus Panchenko <zeus@gnu.org.ua> MFC after: 1 week
2012-12-18 20:02:53 +00:00
if (!SYNAPTICS_VERSION_GE(synhw, 7, 5) && status[1] != 0x47) {
Clean up and fix style(9) nits.
2008-04-08 19:09:45 +00:00
printf(" Failed to read extended capability bits\n");
return (FALSE);
}
Rephrase and/or fix some comments in Synaptics touchpad initialization function.
2008-12-16 09:51:13 +00:00
/* Set the different capabilities when they exist. */
- Do not clobber softc when psm(4) is reintialized. - Make INITAFTERSUSPEND flag independent of HOOKRESUME flag. - Automatically set INITAFTERSUSPEND flag when ALPS GlidePoint is detected. - Always probe Synaptics Touchpad. Allow MOUSE_SYN_GETHWINFO ioctl and automatically set INITAFTERSUSPEND flag when a supported device is detected, regardless of "hw.psm.synaptics_support" tunable setting. - Update psm(4) to reflect the above changes. - Remove long-time defunct SYNCHACK flag while I am in the neighborhood. MFC after: 1 month
2012-03-27 23:43:01 +00:00
buttons = 0;
synhw.capExtended = (status[0] & 0x80) != 0;
if (synhw.capExtended) {
synaptics: more support for semi-MT trackpads. Several improvements to the Synaptics driver to support semi-multitouch trackpads and some other fixes: - Two finger scrolling support for "semi-MT" touchpads. Those include many of the older Synaptics touchpads before "true" multitouch support (indicated by capMultiFinger). Semi-MT touchpads can report a second finger position, but the X or Y coordinate may be swapped with some coordinate of the first finger. This is a result of how the hardware works internally. Therefore, all that can be reliably extracted is the bounding box of the two finger positions. Semi-MT touchpads can be recognized by the capAdvancedGestures capability bit. After setting the mode byte, advanced gestures mode has to be enabled. Then, data packets compatible with the capMultiFinger format are sent, so the same two finger scrolling code can be leveraged. Enabling advanced gestures mode on true multitouch touchpads should be harmless. Linux seems to always enable advanced gestures mode. - Put mode setting logic into own functions synaptics_preferred_mode() and synaptics_set_mode() to have this in one place. synaptics_passthrough_on() and synaptics_passthrough_off() currently always use 0xc1 as the mode byte, which may be wrong for touchpads that don't have capExtended. - Expose X and Y resolution of touchpad to userland. Also expose minimum and maximum X and Y coordinates. This is useful for programs in userspace that read raw PSM packets (with PSM_LEVEL_NATIVE enabled) and need to interpret the coordinates. - Also send "extended w mode" packets (see section 3.2.9 of 511-000275-01_RevB.pdf) to userspace if PSM_LEVEL_NATIVE is enabled. This is useful for userspace programs/drivers such as xf86-input-synaptics that can handle these packets. - Fix parsing of nExtendedQueries, and request extended/continued capability bits depending on this value. - capReportsMax, capClearPad, capAdvancedGestures and capCoveredPad must be extracted from status[0] and not status[2], I think. Submitted by: Jan Kokemüller jan.kokemueller at gmail.com
2015-05-10 20:36:57 +00:00
synhw.nExtendedQueries = (status[0] & 0x70) >> 4;
psm: Add support for middle and extended buttons on Synaptics touchpads PR: kern/170834 Submitted by: Brandon Gooch <jamesbrandongooch@gmail.com> Tested by: Artyom Mirgorodskiy <artyom.mirgorodsky@gmail.com> MFC after: 1 month
2013-09-02 19:15:20 +00:00
synhw.capMiddle = (status[0] & 0x04) != 0;
synhw.capPassthrough = (status[2] & 0x80) != 0;
psm: print newer Synaptics Touchpad capabilities.
2015-04-06 01:04:08 +00:00
synhw.capLowPower = (status[2] & 0x40) != 0;
synhw.capMultiFingerReport =
(status[2] & 0x20) != 0;
psm: Add support for middle and extended buttons on Synaptics touchpads PR: kern/170834 Submitted by: Brandon Gooch <jamesbrandongooch@gmail.com> Tested by: Artyom Mirgorodskiy <artyom.mirgorodsky@gmail.com> MFC after: 1 month
2013-09-02 19:15:20 +00:00
synhw.capSleep = (status[2] & 0x10) != 0;
synhw.capFourButtons = (status[2] & 0x08) != 0;
psm: print newer Synaptics Touchpad capabilities.
2015-04-06 01:04:08 +00:00
synhw.capBallistics = (status[2] & 0x04) != 0;
psm: Add support for middle and extended buttons on Synaptics touchpads PR: kern/170834 Submitted by: Brandon Gooch <jamesbrandongooch@gmail.com> Tested by: Artyom Mirgorodskiy <artyom.mirgorodsky@gmail.com> MFC after: 1 month
2013-09-02 19:15:20 +00:00
synhw.capMultiFinger = (status[2] & 0x02) != 0;
synhw.capPalmDetect = (status[2] & 0x01) != 0;
Clean up and fix style(9) nits.
2008-04-08 19:09:45 +00:00
synaptics: more support for semi-MT trackpads. Several improvements to the Synaptics driver to support semi-multitouch trackpads and some other fixes: - Two finger scrolling support for "semi-MT" touchpads. Those include many of the older Synaptics touchpads before "true" multitouch support (indicated by capMultiFinger). Semi-MT touchpads can report a second finger position, but the X or Y coordinate may be swapped with some coordinate of the first finger. This is a result of how the hardware works internally. Therefore, all that can be reliably extracted is the bounding box of the two finger positions. Semi-MT touchpads can be recognized by the capAdvancedGestures capability bit. After setting the mode byte, advanced gestures mode has to be enabled. Then, data packets compatible with the capMultiFinger format are sent, so the same two finger scrolling code can be leveraged. Enabling advanced gestures mode on true multitouch touchpads should be harmless. Linux seems to always enable advanced gestures mode. - Put mode setting logic into own functions synaptics_preferred_mode() and synaptics_set_mode() to have this in one place. synaptics_passthrough_on() and synaptics_passthrough_off() currently always use 0xc1 as the mode byte, which may be wrong for touchpads that don't have capExtended. - Expose X and Y resolution of touchpad to userland. Also expose minimum and maximum X and Y coordinates. This is useful for programs in userspace that read raw PSM packets (with PSM_LEVEL_NATIVE enabled) and need to interpret the coordinates. - Also send "extended w mode" packets (see section 3.2.9 of 511-000275-01_RevB.pdf) to userspace if PSM_LEVEL_NATIVE is enabled. This is useful for userspace programs/drivers such as xf86-input-synaptics that can handle these packets. - Fix parsing of nExtendedQueries, and request extended/continued capability bits depending on this value. - capReportsMax, capClearPad, capAdvancedGestures and capCoveredPad must be extracted from status[0] and not status[2], I think. Submitted by: Jan Kokemüller jan.kokemueller at gmail.com
2015-05-10 20:36:57 +00:00
if (!set_mouse_scaling(kbdc, 1))
return (FALSE);
if (mouse_ext_command(kbdc, 0x08) == 0)
return (FALSE);
if (get_mouse_status(kbdc, status, 0, 3) != 3)
return (FALSE);
synhw.infoXupmm = status[0];
synhw.infoYupmm = status[2];
Clean up and fix style(9) nits.
2008-04-08 19:09:45 +00:00
if (verbose >= 2) {
printf(" Extended capabilities:\n");
- Do not clobber softc when psm(4) is reintialized. - Make INITAFTERSUSPEND flag independent of HOOKRESUME flag. - Automatically set INITAFTERSUSPEND flag when ALPS GlidePoint is detected. - Always probe Synaptics Touchpad. Allow MOUSE_SYN_GETHWINFO ioctl and automatically set INITAFTERSUSPEND flag when a supported device is detected, regardless of "hw.psm.synaptics_support" tunable setting. - Update psm(4) to reflect the above changes. - Remove long-time defunct SYNCHACK flag while I am in the neighborhood. MFC after: 1 month
2012-03-27 23:43:01 +00:00
printf(" capExtended: %d\n", synhw.capExtended);
psm: Add support for middle and extended buttons on Synaptics touchpads PR: kern/170834 Submitted by: Brandon Gooch <jamesbrandongooch@gmail.com> Tested by: Artyom Mirgorodskiy <artyom.mirgorodsky@gmail.com> MFC after: 1 month
2013-09-02 19:15:20 +00:00
printf(" capMiddle: %d\n", synhw.capMiddle);
printf(" nExtendedQueries: %d\n",
synhw.nExtendedQueries);
- Do not clobber softc when psm(4) is reintialized. - Make INITAFTERSUSPEND flag independent of HOOKRESUME flag. - Automatically set INITAFTERSUSPEND flag when ALPS GlidePoint is detected. - Always probe Synaptics Touchpad. Allow MOUSE_SYN_GETHWINFO ioctl and automatically set INITAFTERSUSPEND flag when a supported device is detected, regardless of "hw.psm.synaptics_support" tunable setting. - Update psm(4) to reflect the above changes. - Remove long-time defunct SYNCHACK flag while I am in the neighborhood. MFC after: 1 month
2012-03-27 23:43:01 +00:00
printf(" capPassthrough: %d\n", synhw.capPassthrough);
psm: print newer Synaptics Touchpad capabilities.
2015-04-06 01:04:08 +00:00
printf(" capLowPower: %d\n", synhw.capLowPower);
printf(" capMultiFingerReport: %d\n",
synhw.capMultiFingerReport);
- Do not clobber softc when psm(4) is reintialized. - Make INITAFTERSUSPEND flag independent of HOOKRESUME flag. - Automatically set INITAFTERSUSPEND flag when ALPS GlidePoint is detected. - Always probe Synaptics Touchpad. Allow MOUSE_SYN_GETHWINFO ioctl and automatically set INITAFTERSUSPEND flag when a supported device is detected, regardless of "hw.psm.synaptics_support" tunable setting. - Update psm(4) to reflect the above changes. - Remove long-time defunct SYNCHACK flag while I am in the neighborhood. MFC after: 1 month
2012-03-27 23:43:01 +00:00
printf(" capSleep: %d\n", synhw.capSleep);
printf(" capFourButtons: %d\n", synhw.capFourButtons);
psm: print newer Synaptics Touchpad capabilities.
2015-04-06 01:04:08 +00:00
printf(" capBallistics: %d\n", synhw.capBallistics);
- Do not clobber softc when psm(4) is reintialized. - Make INITAFTERSUSPEND flag independent of HOOKRESUME flag. - Automatically set INITAFTERSUSPEND flag when ALPS GlidePoint is detected. - Always probe Synaptics Touchpad. Allow MOUSE_SYN_GETHWINFO ioctl and automatically set INITAFTERSUSPEND flag when a supported device is detected, regardless of "hw.psm.synaptics_support" tunable setting. - Update psm(4) to reflect the above changes. - Remove long-time defunct SYNCHACK flag while I am in the neighborhood. MFC after: 1 month
2012-03-27 23:43:01 +00:00
printf(" capMultiFinger: %d\n", synhw.capMultiFinger);
printf(" capPalmDetect: %d\n", synhw.capPalmDetect);
synaptics: more support for semi-MT trackpads. Several improvements to the Synaptics driver to support semi-multitouch trackpads and some other fixes: - Two finger scrolling support for "semi-MT" touchpads. Those include many of the older Synaptics touchpads before "true" multitouch support (indicated by capMultiFinger). Semi-MT touchpads can report a second finger position, but the X or Y coordinate may be swapped with some coordinate of the first finger. This is a result of how the hardware works internally. Therefore, all that can be reliably extracted is the bounding box of the two finger positions. Semi-MT touchpads can be recognized by the capAdvancedGestures capability bit. After setting the mode byte, advanced gestures mode has to be enabled. Then, data packets compatible with the capMultiFinger format are sent, so the same two finger scrolling code can be leveraged. Enabling advanced gestures mode on true multitouch touchpads should be harmless. Linux seems to always enable advanced gestures mode. - Put mode setting logic into own functions synaptics_preferred_mode() and synaptics_set_mode() to have this in one place. synaptics_passthrough_on() and synaptics_passthrough_off() currently always use 0xc1 as the mode byte, which may be wrong for touchpads that don't have capExtended. - Expose X and Y resolution of touchpad to userland. Also expose minimum and maximum X and Y coordinates. This is useful for programs in userspace that read raw PSM packets (with PSM_LEVEL_NATIVE enabled) and need to interpret the coordinates. - Also send "extended w mode" packets (see section 3.2.9 of 511-000275-01_RevB.pdf) to userspace if PSM_LEVEL_NATIVE is enabled. This is useful for userspace programs/drivers such as xf86-input-synaptics that can handle these packets. - Fix parsing of nExtendedQueries, and request extended/continued capability bits depending on this value. - capReportsMax, capClearPad, capAdvancedGestures and capCoveredPad must be extracted from status[0] and not status[2], I think. Submitted by: Jan Kokemüller jan.kokemueller at gmail.com
2015-05-10 20:36:57 +00:00
printf(" infoXupmm: %d\n", synhw.infoXupmm);
printf(" infoYupmm: %d\n", synhw.infoYupmm);
Clean up and fix style(9) nits.
2008-04-08 19:09:45 +00:00
}
/*
psm: Add support for middle and extended buttons on Synaptics touchpads PR: kern/170834 Submitted by: Brandon Gooch <jamesbrandongooch@gmail.com> Tested by: Artyom Mirgorodskiy <artyom.mirgorodsky@gmail.com> MFC after: 1 month
2013-09-02 19:15:20 +00:00
* If nExtendedQueries is 1 or greater, then the TouchPad
* supports this number of extended queries. We can load
Rephrase and/or fix some comments in Synaptics touchpad initialization function.
2008-12-16 09:51:13 +00:00
* more information about buttons using query 0x09.
Clean up and fix style(9) nits.
2008-04-08 19:09:45 +00:00
*/
synaptics: more support for semi-MT trackpads. Several improvements to the Synaptics driver to support semi-multitouch trackpads and some other fixes: - Two finger scrolling support for "semi-MT" touchpads. Those include many of the older Synaptics touchpads before "true" multitouch support (indicated by capMultiFinger). Semi-MT touchpads can report a second finger position, but the X or Y coordinate may be swapped with some coordinate of the first finger. This is a result of how the hardware works internally. Therefore, all that can be reliably extracted is the bounding box of the two finger positions. Semi-MT touchpads can be recognized by the capAdvancedGestures capability bit. After setting the mode byte, advanced gestures mode has to be enabled. Then, data packets compatible with the capMultiFinger format are sent, so the same two finger scrolling code can be leveraged. Enabling advanced gestures mode on true multitouch touchpads should be harmless. Linux seems to always enable advanced gestures mode. - Put mode setting logic into own functions synaptics_preferred_mode() and synaptics_set_mode() to have this in one place. synaptics_passthrough_on() and synaptics_passthrough_off() currently always use 0xc1 as the mode byte, which may be wrong for touchpads that don't have capExtended. - Expose X and Y resolution of touchpad to userland. Also expose minimum and maximum X and Y coordinates. This is useful for programs in userspace that read raw PSM packets (with PSM_LEVEL_NATIVE enabled) and need to interpret the coordinates. - Also send "extended w mode" packets (see section 3.2.9 of 511-000275-01_RevB.pdf) to userspace if PSM_LEVEL_NATIVE is enabled. This is useful for userspace programs/drivers such as xf86-input-synaptics that can handle these packets. - Fix parsing of nExtendedQueries, and request extended/continued capability bits depending on this value. - capReportsMax, capClearPad, capAdvancedGestures and capCoveredPad must be extracted from status[0] and not status[2], I think. Submitted by: Jan Kokemüller jan.kokemueller at gmail.com
2015-05-10 20:36:57 +00:00
if (synhw.nExtendedQueries >= 1) {
if (!set_mouse_scaling(kbdc, 1))
return (FALSE);
Clean up and fix style(9) nits.
2008-04-08 19:09:45 +00:00
if (mouse_ext_command(kbdc, 0x09) == 0)
return (FALSE);
if (get_mouse_status(kbdc, status, 0, 3) != 3)
return (FALSE);
Improve Synaptics support for newer touchpads. Enable two finger scrolling by default and disable the edge scrolling if the touchpad has no physical zone for it. Disable directional scrolling by default to avoid using extended buttons as scroll buttons. Add support for ClickPad. On Lenovo laptops, this is the button reported when one presses the touchpad. While there, fix a problem where the extended buttons were not reporting the button release event correctly: we need to save the state of the buttons and report it to sysmouse until we receive a packet from the touchpad indicating the button has been released. This makes it possible to use an extended button to resize a window. On Lenovo laptops, the major buttons are actually reported as extended buttons. Tested by: many (current@) MFC after: 1 week
2015-04-11 18:44:07 +00:00
synhw.verticalScroll = (status[0] & 0x01) != 0;
synhw.horizontalScroll = (status[0] & 0x02) != 0;
synhw.verticalWheel = (status[0] & 0x08) != 0;
psm: Add support for middle and extended buttons on Synaptics touchpads PR: kern/170834 Submitted by: Brandon Gooch <jamesbrandongooch@gmail.com> Tested by: Artyom Mirgorodskiy <artyom.mirgorodsky@gmail.com> MFC after: 1 month
2013-09-02 19:15:20 +00:00
synhw.nExtendedButtons = (status[1] & 0xf0) >> 4;
synaptics: more support for semi-MT trackpads. Several improvements to the Synaptics driver to support semi-multitouch trackpads and some other fixes: - Two finger scrolling support for "semi-MT" touchpads. Those include many of the older Synaptics touchpads before "true" multitouch support (indicated by capMultiFinger). Semi-MT touchpads can report a second finger position, but the X or Y coordinate may be swapped with some coordinate of the first finger. This is a result of how the hardware works internally. Therefore, all that can be reliably extracted is the bounding box of the two finger positions. Semi-MT touchpads can be recognized by the capAdvancedGestures capability bit. After setting the mode byte, advanced gestures mode has to be enabled. Then, data packets compatible with the capMultiFinger format are sent, so the same two finger scrolling code can be leveraged. Enabling advanced gestures mode on true multitouch touchpads should be harmless. Linux seems to always enable advanced gestures mode. - Put mode setting logic into own functions synaptics_preferred_mode() and synaptics_set_mode() to have this in one place. synaptics_passthrough_on() and synaptics_passthrough_off() currently always use 0xc1 as the mode byte, which may be wrong for touchpads that don't have capExtended. - Expose X and Y resolution of touchpad to userland. Also expose minimum and maximum X and Y coordinates. This is useful for programs in userspace that read raw PSM packets (with PSM_LEVEL_NATIVE enabled) and need to interpret the coordinates. - Also send "extended w mode" packets (see section 3.2.9 of 511-000275-01_RevB.pdf) to userspace if PSM_LEVEL_NATIVE is enabled. This is useful for userspace programs/drivers such as xf86-input-synaptics that can handle these packets. - Fix parsing of nExtendedQueries, and request extended/continued capability bits depending on this value. - capReportsMax, capClearPad, capAdvancedGestures and capCoveredPad must be extracted from status[0] and not status[2], I think. Submitted by: Jan Kokemüller jan.kokemueller at gmail.com
2015-05-10 20:36:57 +00:00
synhw.capEWmode = (status[0] & 0x04) != 0;
Improve Synaptics support for newer touchpads. Enable two finger scrolling by default and disable the edge scrolling if the touchpad has no physical zone for it. Disable directional scrolling by default to avoid using extended buttons as scroll buttons. Add support for ClickPad. On Lenovo laptops, this is the button reported when one presses the touchpad. While there, fix a problem where the extended buttons were not reporting the button release event correctly: we need to save the state of the buttons and report it to sysmouse until we receive a packet from the touchpad indicating the button has been released. This makes it possible to use an extended button to resize a window. On Lenovo laptops, the major buttons are actually reported as extended buttons. Tested by: many (current@) MFC after: 1 week
2015-04-11 18:44:07 +00:00
if (verbose >= 2) {
printf(" Extended model ID:\n");
printf(" verticalScroll: %d\n",
synhw.verticalScroll);
printf(" horizontalScroll: %d\n",
synhw.horizontalScroll);
printf(" verticalWheel: %d\n",
synhw.verticalWheel);
printf(" nExtendedButtons: %d\n",
synhw.nExtendedButtons);
synaptics: more support for semi-MT trackpads. Several improvements to the Synaptics driver to support semi-multitouch trackpads and some other fixes: - Two finger scrolling support for "semi-MT" touchpads. Those include many of the older Synaptics touchpads before "true" multitouch support (indicated by capMultiFinger). Semi-MT touchpads can report a second finger position, but the X or Y coordinate may be swapped with some coordinate of the first finger. This is a result of how the hardware works internally. Therefore, all that can be reliably extracted is the bounding box of the two finger positions. Semi-MT touchpads can be recognized by the capAdvancedGestures capability bit. After setting the mode byte, advanced gestures mode has to be enabled. Then, data packets compatible with the capMultiFinger format are sent, so the same two finger scrolling code can be leveraged. Enabling advanced gestures mode on true multitouch touchpads should be harmless. Linux seems to always enable advanced gestures mode. - Put mode setting logic into own functions synaptics_preferred_mode() and synaptics_set_mode() to have this in one place. synaptics_passthrough_on() and synaptics_passthrough_off() currently always use 0xc1 as the mode byte, which may be wrong for touchpads that don't have capExtended. - Expose X and Y resolution of touchpad to userland. Also expose minimum and maximum X and Y coordinates. This is useful for programs in userspace that read raw PSM packets (with PSM_LEVEL_NATIVE enabled) and need to interpret the coordinates. - Also send "extended w mode" packets (see section 3.2.9 of 511-000275-01_RevB.pdf) to userspace if PSM_LEVEL_NATIVE is enabled. This is useful for userspace programs/drivers such as xf86-input-synaptics that can handle these packets. - Fix parsing of nExtendedQueries, and request extended/continued capability bits depending on this value. - capReportsMax, capClearPad, capAdvancedGestures and capCoveredPad must be extracted from status[0] and not status[2], I think. Submitted by: Jan Kokemüller jan.kokemueller at gmail.com
2015-05-10 20:36:57 +00:00
printf(" capEWmode: %d\n",
synhw.capEWmode);
Improve Synaptics support for newer touchpads. Enable two finger scrolling by default and disable the edge scrolling if the touchpad has no physical zone for it. Disable directional scrolling by default to avoid using extended buttons as scroll buttons. Add support for ClickPad. On Lenovo laptops, this is the button reported when one presses the touchpad. While there, fix a problem where the extended buttons were not reporting the button release event correctly: we need to save the state of the buttons and report it to sysmouse until we receive a packet from the touchpad indicating the button has been released. This makes it possible to use an extended button to resize a window. On Lenovo laptops, the major buttons are actually reported as extended buttons. Tested by: many (current@) MFC after: 1 week
2015-04-11 18:44:07 +00:00
}
psm: Add support for middle and extended buttons on Synaptics touchpads PR: kern/170834 Submitted by: Brandon Gooch <jamesbrandongooch@gmail.com> Tested by: Artyom Mirgorodskiy <artyom.mirgorodsky@gmail.com> MFC after: 1 month
2013-09-02 19:15:20 +00:00
/*
* Add the number of extended buttons to the total
* button support count, including the middle button
* if capMiddle support bit is set.
*/
buttons = synhw.nExtendedButtons + synhw.capMiddle;
- Do not clobber softc when psm(4) is reintialized. - Make INITAFTERSUSPEND flag independent of HOOKRESUME flag. - Automatically set INITAFTERSUSPEND flag when ALPS GlidePoint is detected. - Always probe Synaptics Touchpad. Allow MOUSE_SYN_GETHWINFO ioctl and automatically set INITAFTERSUSPEND flag when a supported device is detected, regardless of "hw.psm.synaptics_support" tunable setting. - Update psm(4) to reflect the above changes. - Remove long-time defunct SYNCHACK flag while I am in the neighborhood. MFC after: 1 month
2012-03-27 23:43:01 +00:00
} else
psm: Add support for middle and extended buttons on Synaptics touchpads PR: kern/170834 Submitted by: Brandon Gooch <jamesbrandongooch@gmail.com> Tested by: Artyom Mirgorodskiy <artyom.mirgorodsky@gmail.com> MFC after: 1 month
2013-09-02 19:15:20 +00:00
/*
* If the capFourButtons support bit is set,
* add a fourth button to the total button count.
*/
- Do not clobber softc when psm(4) is reintialized. - Make INITAFTERSUSPEND flag independent of HOOKRESUME flag. - Automatically set INITAFTERSUSPEND flag when ALPS GlidePoint is detected. - Always probe Synaptics Touchpad. Allow MOUSE_SYN_GETHWINFO ioctl and automatically set INITAFTERSUSPEND flag when a supported device is detected, regardless of "hw.psm.synaptics_support" tunable setting. - Update psm(4) to reflect the above changes. - Remove long-time defunct SYNCHACK flag while I am in the neighborhood. MFC after: 1 month
2012-03-27 23:43:01 +00:00
buttons = synhw.capFourButtons ? 1 : 0;
synaptics: more support for semi-MT trackpads. Several improvements to the Synaptics driver to support semi-multitouch trackpads and some other fixes: - Two finger scrolling support for "semi-MT" touchpads. Those include many of the older Synaptics touchpads before "true" multitouch support (indicated by capMultiFinger). Semi-MT touchpads can report a second finger position, but the X or Y coordinate may be swapped with some coordinate of the first finger. This is a result of how the hardware works internally. Therefore, all that can be reliably extracted is the bounding box of the two finger positions. Semi-MT touchpads can be recognized by the capAdvancedGestures capability bit. After setting the mode byte, advanced gestures mode has to be enabled. Then, data packets compatible with the capMultiFinger format are sent, so the same two finger scrolling code can be leveraged. Enabling advanced gestures mode on true multitouch touchpads should be harmless. Linux seems to always enable advanced gestures mode. - Put mode setting logic into own functions synaptics_preferred_mode() and synaptics_set_mode() to have this in one place. synaptics_passthrough_on() and synaptics_passthrough_off() currently always use 0xc1 as the mode byte, which may be wrong for touchpads that don't have capExtended. - Expose X and Y resolution of touchpad to userland. Also expose minimum and maximum X and Y coordinates. This is useful for programs in userspace that read raw PSM packets (with PSM_LEVEL_NATIVE enabled) and need to interpret the coordinates. - Also send "extended w mode" packets (see section 3.2.9 of 511-000275-01_RevB.pdf) to userspace if PSM_LEVEL_NATIVE is enabled. This is useful for userspace programs/drivers such as xf86-input-synaptics that can handle these packets. - Fix parsing of nExtendedQueries, and request extended/continued capability bits depending on this value. - capReportsMax, capClearPad, capAdvancedGestures and capCoveredPad must be extracted from status[0] and not status[2], I think. Submitted by: Jan Kokemüller jan.kokemueller at gmail.com
2015-05-10 20:36:57 +00:00
/* Read the continued capabilities bits. */
if (synhw.nExtendedQueries >= 4) {
if (!set_mouse_scaling(kbdc, 1))
return (FALSE);
if (mouse_ext_command(kbdc, 0x0c) == 0)
return (FALSE);
if (get_mouse_status(kbdc, status, 0, 3) != 3)
return (FALSE);
synhw.capClickPad = (status[1] & 0x01) << 1;
synhw.capClickPad |= (status[0] & 0x10) != 0;
synhw.capDeluxeLEDs = (status[1] & 0x02) != 0;
synhw.noAbsoluteFilter = (status[1] & 0x04) != 0;
synhw.capReportsV = (status[1] & 0x08) != 0;
synhw.capUniformClickPad = (status[1] & 0x10) != 0;
synhw.capReportsMin = (status[1] & 0x20) != 0;
synhw.capInterTouch = (status[1] & 0x40) != 0;
synhw.capReportsMax = (status[0] & 0x02) != 0;
synhw.capClearPad = (status[0] & 0x04) != 0;
synhw.capAdvancedGestures = (status[0] & 0x08) != 0;
synhw.capCoveredPad = (status[0] & 0x80) != 0;
if (synhw.capReportsMax) {
if (!set_mouse_scaling(kbdc, 1))
return (FALSE);
if (mouse_ext_command(kbdc, 0x0d) == 0)
return (FALSE);
if (get_mouse_status(kbdc, status, 0, 3) != 3)
return (FALSE);
synhw.maximumXCoord = (status[0] << 5) |
((status[1] & 0x0f) << 1);
synhw.maximumYCoord = (status[2] << 5) |
((status[1] & 0xf0) >> 3);
}
if (synhw.capReportsMin) {
if (!set_mouse_scaling(kbdc, 1))
return (FALSE);
if (mouse_ext_command(kbdc, 0x0f) == 0)
return (FALSE);
if (get_mouse_status(kbdc, status, 0, 3) != 3)
return (FALSE);
synhw.minimumXCoord = (status[0] << 5) |
((status[1] & 0x0f) << 1);
synhw.minimumYCoord = (status[2] << 5) |
((status[1] & 0xf0) >> 3);
}
if (verbose >= 2) {
printf(" Continued capabilities:\n");
printf(" capClickPad: %d\n",
synhw.capClickPad);
printf(" capDeluxeLEDs: %d\n",
synhw.capDeluxeLEDs);
printf(" noAbsoluteFilter: %d\n",
synhw.noAbsoluteFilter);
printf(" capReportsV: %d\n",
synhw.capReportsV);
printf(" capUniformClickPad: %d\n",
synhw.capUniformClickPad);
printf(" capReportsMin: %d\n",
synhw.capReportsMin);
printf(" capInterTouch: %d\n",
synhw.capInterTouch);
printf(" capReportsMax: %d\n",
synhw.capReportsMax);
printf(" capClearPad: %d\n",
synhw.capClearPad);
printf(" capAdvancedGestures: %d\n",
synhw.capAdvancedGestures);
printf(" capCoveredPad: %d\n",
synhw.capCoveredPad);
if (synhw.capReportsMax) {
printf(" maximumXCoord: %d\n",
synhw.maximumXCoord);
printf(" maximumYCoord: %d\n",
synhw.maximumYCoord);
}
if (synhw.capReportsMin) {
printf(" minimumXCoord: %d\n",
synhw.minimumXCoord);
printf(" minimumYCoord: %d\n",
synhw.minimumYCoord);
}
}
buttons += synhw.capClickPad;
}
- Do not clobber softc when psm(4) is reintialized. - Make INITAFTERSUSPEND flag independent of HOOKRESUME flag. - Automatically set INITAFTERSUSPEND flag when ALPS GlidePoint is detected. - Always probe Synaptics Touchpad. Allow MOUSE_SYN_GETHWINFO ioctl and automatically set INITAFTERSUSPEND flag when a supported device is detected, regardless of "hw.psm.synaptics_support" tunable setting. - Update psm(4) to reflect the above changes. - Remove long-time defunct SYNCHACK flag while I am in the neighborhood. MFC after: 1 month
2012-03-27 23:43:01 +00:00
}
synaptics: more support for semi-MT trackpads. Several improvements to the Synaptics driver to support semi-multitouch trackpads and some other fixes: - Two finger scrolling support for "semi-MT" touchpads. Those include many of the older Synaptics touchpads before "true" multitouch support (indicated by capMultiFinger). Semi-MT touchpads can report a second finger position, but the X or Y coordinate may be swapped with some coordinate of the first finger. This is a result of how the hardware works internally. Therefore, all that can be reliably extracted is the bounding box of the two finger positions. Semi-MT touchpads can be recognized by the capAdvancedGestures capability bit. After setting the mode byte, advanced gestures mode has to be enabled. Then, data packets compatible with the capMultiFinger format are sent, so the same two finger scrolling code can be leveraged. Enabling advanced gestures mode on true multitouch touchpads should be harmless. Linux seems to always enable advanced gestures mode. - Put mode setting logic into own functions synaptics_preferred_mode() and synaptics_set_mode() to have this in one place. synaptics_passthrough_on() and synaptics_passthrough_off() currently always use 0xc1 as the mode byte, which may be wrong for touchpads that don't have capExtended. - Expose X and Y resolution of touchpad to userland. Also expose minimum and maximum X and Y coordinates. This is useful for programs in userspace that read raw PSM packets (with PSM_LEVEL_NATIVE enabled) and need to interpret the coordinates. - Also send "extended w mode" packets (see section 3.2.9 of 511-000275-01_RevB.pdf) to userspace if PSM_LEVEL_NATIVE is enabled. This is useful for userspace programs/drivers such as xf86-input-synaptics that can handle these packets. - Fix parsing of nExtendedQueries, and request extended/continued capability bits depending on this value. - capReportsMax, capClearPad, capAdvancedGestures and capCoveredPad must be extracted from status[0] and not status[2], I think. Submitted by: Jan Kokemüller jan.kokemueller at gmail.com
2015-05-10 20:36:57 +00:00
- Do not clobber softc when psm(4) is reintialized. - Make INITAFTERSUSPEND flag independent of HOOKRESUME flag. - Automatically set INITAFTERSUSPEND flag when ALPS GlidePoint is detected. - Always probe Synaptics Touchpad. Allow MOUSE_SYN_GETHWINFO ioctl and automatically set INITAFTERSUSPEND flag when a supported device is detected, regardless of "hw.psm.synaptics_support" tunable setting. - Update psm(4) to reflect the above changes. - Remove long-time defunct SYNCHACK flag while I am in the neighborhood. MFC after: 1 month
2012-03-27 23:43:01 +00:00
if (verbose >= 2) {
if (synhw.capExtended)
printf(" Additional Buttons: %d\n", buttons);
else
Clean up and fix style(9) nits.
2008-04-08 19:09:45 +00:00
printf(" No extended capabilities\n");
Update support for Synaptics Touchpads (Volume I) o Clean up whitespace and comments in the enable_synaptics() probing function o Only use (and rely on) the extended capability bits when we are told they actually exist o Partly ignore the (possibly dated?) part of the specification about the mode byte so that we can support 'guest devices' too. Tested by: many subscribers to -current Approved by: njl
2004-08-08 00:52:11 +00:00
}
Make life for owners of Synaptics Touchpads more pleasant :-) o Implement a shiny new algorithm to keep track of finger movement at slow speeds. This dramatically reduces the level of questionable language from users trying to resize windows. o Properly catch the many extra buttons and dials which manufacturers are known to screw onto Synaptics touchpad controllers. Currently, up to seven buttons are known to work, more should work too. o Add a number of sysctls allowing one to tune the driver to taste in a simple way: # Should the extra buttons act as axes or as middle button hw.psm.synaptics.directional_scrolls # These control the 'stickiness' at low speeds hw.psm.synaptics.low_speed_threshold hw.psm.synaptics.min_movement hw.psm.synaptics.squelch_level PR: kern/75725 Submitted by: Jason Kuri <jay@oneway.com> MFC after: 1 month
2005-01-10 13:05:58 +00:00
psm: Add support for middle and extended buttons on Synaptics touchpads PR: kern/170834 Submitted by: Brandon Gooch <jamesbrandongooch@gmail.com> Tested by: Artyom Mirgorodskiy <artyom.mirgorodsky@gmail.com> MFC after: 1 month
2013-09-02 19:15:20 +00:00
/*
* Add the default number of 3 buttons to the total
* count of supported buttons reported above.
*/
buttons += 3;
Make life for owners of Synaptics Touchpads more pleasant :-) o Implement a shiny new algorithm to keep track of finger movement at slow speeds. This dramatically reduces the level of questionable language from users trying to resize windows. o Properly catch the many extra buttons and dials which manufacturers are known to screw onto Synaptics touchpad controllers. Currently, up to seven buttons are known to work, more should work too. o Add a number of sysctls allowing one to tune the driver to taste in a simple way: # Should the extra buttons act as axes or as middle button hw.psm.synaptics.directional_scrolls # These control the 'stickiness' at low speeds hw.psm.synaptics.low_speed_threshold hw.psm.synaptics.min_movement hw.psm.synaptics.squelch_level PR: kern/75725 Submitted by: Jason Kuri <jay@oneway.com> MFC after: 1 month
2005-01-10 13:05:58 +00:00
/*
Rephrase and/or fix some comments in Synaptics touchpad initialization function.
2008-12-16 09:51:13 +00:00
* Read the mode byte.
Clean up and fix style(9) nits.
2008-04-08 19:09:45 +00:00
*
* XXX: Note the Synaptics documentation also defines the first
* byte of the response to this query to be a constant 0x3b, this
* does not appear to be true for Touchpads with guest devices.
Make life for owners of Synaptics Touchpads more pleasant :-) o Implement a shiny new algorithm to keep track of finger movement at slow speeds. This dramatically reduces the level of questionable language from users trying to resize windows. o Properly catch the many extra buttons and dials which manufacturers are known to screw onto Synaptics touchpad controllers. Currently, up to seven buttons are known to work, more should work too. o Add a number of sysctls allowing one to tune the driver to taste in a simple way: # Should the extra buttons act as axes or as middle button hw.psm.synaptics.directional_scrolls # These control the 'stickiness' at low speeds hw.psm.synaptics.low_speed_threshold hw.psm.synaptics.min_movement hw.psm.synaptics.squelch_level PR: kern/75725 Submitted by: Jason Kuri <jay@oneway.com> MFC after: 1 month
2005-01-10 13:05:58 +00:00
*/
Clean up and fix style(9) nits.
2008-04-08 19:09:45 +00:00
if (mouse_ext_command(kbdc, 1) == 0)
return (FALSE);
if (get_mouse_status(kbdc, status, 0, 3) != 3)
Make life for owners of Synaptics Touchpads more pleasant :-) o Implement a shiny new algorithm to keep track of finger movement at slow speeds. This dramatically reduces the level of questionable language from users trying to resize windows. o Properly catch the many extra buttons and dials which manufacturers are known to screw onto Synaptics touchpad controllers. Currently, up to seven buttons are known to work, more should work too. o Add a number of sysctls allowing one to tune the driver to taste in a simple way: # Should the extra buttons act as axes or as middle button hw.psm.synaptics.directional_scrolls # These control the 'stickiness' at low speeds hw.psm.synaptics.low_speed_threshold hw.psm.synaptics.min_movement hw.psm.synaptics.squelch_level PR: kern/75725 Submitted by: Jason Kuri <jay@oneway.com> MFC after: 1 month
2005-01-10 13:05:58 +00:00
return (FALSE);
psm: Support detection of Synaptics touchpad v7.5 and above Starting with firmware v7.5, the "Read TouchPad Modes" ($01) and "Read Capabilities" ($02) commands changed: previously constant bytes now carry variable information. We now compare those bytes to expected constants only for firmware prior to v7.5. Tested by: Zeus Panchenko <zeus@gnu.org.ua> MFC after: 1 week
2012-12-18 20:02:53 +00:00
if (!SYNAPTICS_VERSION_GE(synhw, 7, 5) && status[1] != 0x47) {
Clean up and fix style(9) nits.
2008-04-08 19:09:45 +00:00
printf(" Failed to read mode byte\n");
Make life for owners of Synaptics Touchpads more pleasant :-) o Implement a shiny new algorithm to keep track of finger movement at slow speeds. This dramatically reduces the level of questionable language from users trying to resize windows. o Properly catch the many extra buttons and dials which manufacturers are known to screw onto Synaptics touchpad controllers. Currently, up to seven buttons are known to work, more should work too. o Add a number of sysctls allowing one to tune the driver to taste in a simple way: # Should the extra buttons act as axes or as middle button hw.psm.synaptics.directional_scrolls # These control the 'stickiness' at low speeds hw.psm.synaptics.low_speed_threshold hw.psm.synaptics.min_movement hw.psm.synaptics.squelch_level PR: kern/75725 Submitted by: Jason Kuri <jay@oneway.com> MFC after: 1 month
2005-01-10 13:05:58 +00:00
return (FALSE);
}
Unbreak mouse on resume on Thinkpads when hw.psm.trackpoint_support=0, which is default. It was broken in r281441. It appears that set_trackpoint_parameters() call on resume disables the mouse. So, we need not call it on resume if hw.psm.trackpoint_support=0. The problem is that the probe functions are used both for probing and for reiniting on resume. And the absense of the softc parameter is used as a mark to distinguish reinit and probe, which is quite ugly. At the same time the softc parameter is needed to call set_trackpoint_parameters(). o Change the arguments of probefunc_t to always supply the softc, and use additional enum argument to tell probing from initing. o Don't call set_trackpoint_parameters() from global doinitialize(), instead call it from the enable_trackpoint() only. o In enable_synaptics() call enable_trackpoint() in both probe and reinit cases. Together with: Jan Kokemüller <jan.kokemueller gmail.com>
2015-06-12 13:57:04 +00:00
if (arg == PROBE)
- Do not clobber softc when psm(4) is reintialized. - Make INITAFTERSUSPEND flag independent of HOOKRESUME flag. - Automatically set INITAFTERSUSPEND flag when ALPS GlidePoint is detected. - Always probe Synaptics Touchpad. Allow MOUSE_SYN_GETHWINFO ioctl and automatically set INITAFTERSUSPEND flag when a supported device is detected, regardless of "hw.psm.synaptics_support" tunable setting. - Update psm(4) to reflect the above changes. - Remove long-time defunct SYNCHACK flag while I am in the neighborhood. MFC after: 1 month
2012-03-27 23:43:01 +00:00
sc->synhw = synhw;
if (!synaptics_support)
return (FALSE);
Unbreak mouse on resume on Thinkpads when hw.psm.trackpoint_support=0, which is default. It was broken in r281441. It appears that set_trackpoint_parameters() call on resume disables the mouse. So, we need not call it on resume if hw.psm.trackpoint_support=0. The problem is that the probe functions are used both for probing and for reiniting on resume. And the absense of the softc parameter is used as a mark to distinguish reinit and probe, which is quite ugly. At the same time the softc parameter is needed to call set_trackpoint_parameters(). o Change the arguments of probefunc_t to always supply the softc, and use additional enum argument to tell probing from initing. o Don't call set_trackpoint_parameters() from global doinitialize(), instead call it from the enable_trackpoint() only. o In enable_synaptics() call enable_trackpoint() in both probe and reinit cases. Together with: Jan Kokemüller <jan.kokemueller gmail.com>
2015-06-12 13:57:04 +00:00
synaptics_set_mode(sc, synaptics_preferred_mode(sc));
if (trackpoint_support && synhw.capPassthrough) {
enable_trackpoint(sc, arg);
}
- Do not clobber softc when psm(4) is reintialized. - Make INITAFTERSUSPEND flag independent of HOOKRESUME flag. - Automatically set INITAFTERSUSPEND flag when ALPS GlidePoint is detected. - Always probe Synaptics Touchpad. Allow MOUSE_SYN_GETHWINFO ioctl and automatically set INITAFTERSUSPEND flag when a supported device is detected, regardless of "hw.psm.synaptics_support" tunable setting. - Update psm(4) to reflect the above changes. - Remove long-time defunct SYNCHACK flag while I am in the neighborhood. MFC after: 1 month
2012-03-27 23:43:01 +00:00
VLOG(3, (LOG_DEBUG, "synaptics: END init (%d buttons)\n", buttons));
Rewrite Synaptics touchpads support with the following goals in mind: o better quality of the movement smoothing o more features such as tap-hold and virtual scrolling Support must still be enabled with this line in your /boot/loader.conf: hw.psm.synaptics_support="1" The following sysctls were removed: hw.psm.synaptics.low_speed_threshold hw.psm.synaptics.min_movement hw.psm.synaptics.squelch_level An overview of this new driver and a short documentation about the added sysctls is available on the wiki: http://wiki.freebsd.org/SynapticsTouchpad
2008-10-14 17:48:36 +00:00
Unbreak mouse on resume on Thinkpads when hw.psm.trackpoint_support=0, which is default. It was broken in r281441. It appears that set_trackpoint_parameters() call on resume disables the mouse. So, we need not call it on resume if hw.psm.trackpoint_support=0. The problem is that the probe functions are used both for probing and for reiniting on resume. And the absense of the softc parameter is used as a mark to distinguish reinit and probe, which is quite ugly. At the same time the softc parameter is needed to call set_trackpoint_parameters(). o Change the arguments of probefunc_t to always supply the softc, and use additional enum argument to tell probing from initing. o Don't call set_trackpoint_parameters() from global doinitialize(), instead call it from the enable_trackpoint() only. o In enable_synaptics() call enable_trackpoint() in both probe and reinit cases. Together with: Jan Kokemüller <jan.kokemueller gmail.com>
2015-06-12 13:57:04 +00:00
if (arg == PROBE) {
- Do not clobber softc when psm(4) is reintialized. - Make INITAFTERSUSPEND flag independent of HOOKRESUME flag. - Automatically set INITAFTERSUSPEND flag when ALPS GlidePoint is detected. - Always probe Synaptics Touchpad. Allow MOUSE_SYN_GETHWINFO ioctl and automatically set INITAFTERSUSPEND flag when a supported device is detected, regardless of "hw.psm.synaptics_support" tunable setting. - Update psm(4) to reflect the above changes. - Remove long-time defunct SYNCHACK flag while I am in the neighborhood. MFC after: 1 month
2012-03-27 23:43:01 +00:00
/* Create sysctl tree. */
synaptics_sysctl_create_tree(sc);
sc->hw.buttons = buttons;
}
Synaptics touchpads must be reinitialized after suspend/resume. This fixes touchpad resume on Asus EeePC among others. Submitted by: rpaulo
2008-12-17 10:42:53 +00:00
Clean up and fix style(9) nits.
2008-04-08 19:09:45 +00:00
return (TRUE);
Add support for the Synaptics Touchpad mouse driver. I reworked the submitted version with style cleanups and changes to comments. I also modified the ioctl interface. This version only has one ioctl (to get the Synaptics-specific config parameters) since this is the only information a user might want. Submitted by: Arne Schwabe <arne -at- rfc2549.org>
2004-07-30 00:59:40 +00:00
}
Update support for Synaptics Touchpads (Volume I) o Clean up whitespace and comments in the enable_synaptics() probing function o Only use (and rely on) the extended capability bits when we are told they actually exist o Partly ignore the (possibly dated?) part of the specification about the mode byte so that we can support 'guest devices' too. Tested by: many subscribers to -current Approved by: njl
2004-08-08 00:52:11 +00:00
Add support for controlling the trackpoint when Synaptics is enabled. To accomplish this, we must put the Synaptics hardware in passthrough mode when talking to the trackpoint. I only performed minor style modifications. Submitted by: Jan Kokemüller <jan.kokemueller at gmail.com> MFC after: 1 week
2015-04-11 18:45:22 +00:00
static void
synaptics_passthrough_on(struct psm_softc *sc)
{
synaptics: more support for semi-MT trackpads. Several improvements to the Synaptics driver to support semi-multitouch trackpads and some other fixes: - Two finger scrolling support for "semi-MT" touchpads. Those include many of the older Synaptics touchpads before "true" multitouch support (indicated by capMultiFinger). Semi-MT touchpads can report a second finger position, but the X or Y coordinate may be swapped with some coordinate of the first finger. This is a result of how the hardware works internally. Therefore, all that can be reliably extracted is the bounding box of the two finger positions. Semi-MT touchpads can be recognized by the capAdvancedGestures capability bit. After setting the mode byte, advanced gestures mode has to be enabled. Then, data packets compatible with the capMultiFinger format are sent, so the same two finger scrolling code can be leveraged. Enabling advanced gestures mode on true multitouch touchpads should be harmless. Linux seems to always enable advanced gestures mode. - Put mode setting logic into own functions synaptics_preferred_mode() and synaptics_set_mode() to have this in one place. synaptics_passthrough_on() and synaptics_passthrough_off() currently always use 0xc1 as the mode byte, which may be wrong for touchpads that don't have capExtended. - Expose X and Y resolution of touchpad to userland. Also expose minimum and maximum X and Y coordinates. This is useful for programs in userspace that read raw PSM packets (with PSM_LEVEL_NATIVE enabled) and need to interpret the coordinates. - Also send "extended w mode" packets (see section 3.2.9 of 511-000275-01_RevB.pdf) to userspace if PSM_LEVEL_NATIVE is enabled. This is useful for userspace programs/drivers such as xf86-input-synaptics that can handle these packets. - Fix parsing of nExtendedQueries, and request extended/continued capability bits depending on this value. - capReportsMax, capClearPad, capAdvancedGestures and capCoveredPad must be extracted from status[0] and not status[2], I think. Submitted by: Jan Kokemüller jan.kokemueller at gmail.com
2015-05-10 20:36:57 +00:00
VLOG(2, (LOG_NOTICE, "psm: setting pass-through mode.\n"));
synaptics_set_mode(sc, synaptics_preferred_mode(sc) | (1 << 5));
Add support for controlling the trackpoint when Synaptics is enabled. To accomplish this, we must put the Synaptics hardware in passthrough mode when talking to the trackpoint. I only performed minor style modifications. Submitted by: Jan Kokemüller <jan.kokemueller at gmail.com> MFC after: 1 week
2015-04-11 18:45:22 +00:00
}
static void
synaptics_passthrough_off(struct psm_softc *sc)
{
VLOG(2, (LOG_NOTICE, "psm: turning pass-through mode off.\n"));
set_mouse_scaling(sc->kbdc, 2);
set_mouse_scaling(sc->kbdc, 1);
synaptics: more support for semi-MT trackpads. Several improvements to the Synaptics driver to support semi-multitouch trackpads and some other fixes: - Two finger scrolling support for "semi-MT" touchpads. Those include many of the older Synaptics touchpads before "true" multitouch support (indicated by capMultiFinger). Semi-MT touchpads can report a second finger position, but the X or Y coordinate may be swapped with some coordinate of the first finger. This is a result of how the hardware works internally. Therefore, all that can be reliably extracted is the bounding box of the two finger positions. Semi-MT touchpads can be recognized by the capAdvancedGestures capability bit. After setting the mode byte, advanced gestures mode has to be enabled. Then, data packets compatible with the capMultiFinger format are sent, so the same two finger scrolling code can be leveraged. Enabling advanced gestures mode on true multitouch touchpads should be harmless. Linux seems to always enable advanced gestures mode. - Put mode setting logic into own functions synaptics_preferred_mode() and synaptics_set_mode() to have this in one place. synaptics_passthrough_on() and synaptics_passthrough_off() currently always use 0xc1 as the mode byte, which may be wrong for touchpads that don't have capExtended. - Expose X and Y resolution of touchpad to userland. Also expose minimum and maximum X and Y coordinates. This is useful for programs in userspace that read raw PSM packets (with PSM_LEVEL_NATIVE enabled) and need to interpret the coordinates. - Also send "extended w mode" packets (see section 3.2.9 of 511-000275-01_RevB.pdf) to userspace if PSM_LEVEL_NATIVE is enabled. This is useful for userspace programs/drivers such as xf86-input-synaptics that can handle these packets. - Fix parsing of nExtendedQueries, and request extended/continued capability bits depending on this value. - capReportsMax, capClearPad, capAdvancedGestures and capCoveredPad must be extracted from status[0] and not status[2], I think. Submitted by: Jan Kokemüller jan.kokemueller at gmail.com
2015-05-10 20:36:57 +00:00
synaptics_set_mode(sc, synaptics_preferred_mode(sc));
Add support for controlling the trackpoint when Synaptics is enabled. To accomplish this, we must put the Synaptics hardware in passthrough mode when talking to the trackpoint. I only performed minor style modifications. Submitted by: Jan Kokemüller <jan.kokemueller at gmail.com> MFC after: 1 week
2015-04-11 18:45:22 +00:00
}
Add preliminary support for IBM/Lenovo TrackPoint. PR: kern/147237 (based on the initial patch for 8.x) Tested by: glebius (device detection and suspend/resume) MFC after: 1 month
2013-03-18 23:22:47 +00:00
/* IBM/Lenovo TrackPoint */
static int
Add support for controlling the trackpoint when Synaptics is enabled. To accomplish this, we must put the Synaptics hardware in passthrough mode when talking to the trackpoint. I only performed minor style modifications. Submitted by: Jan Kokemüller <jan.kokemueller at gmail.com> MFC after: 1 week
2015-04-11 18:45:22 +00:00
trackpoint_command(struct psm_softc *sc, int cmd, int loc, int val)
Add preliminary support for IBM/Lenovo TrackPoint. PR: kern/147237 (based on the initial patch for 8.x) Tested by: glebius (device detection and suspend/resume) MFC after: 1 month
2013-03-18 23:22:47 +00:00
{
const int seq[] = { 0xe2, cmd, loc, val };
int i;
Add support for controlling the trackpoint when Synaptics is enabled. To accomplish this, we must put the Synaptics hardware in passthrough mode when talking to the trackpoint. I only performed minor style modifications. Submitted by: Jan Kokemüller <jan.kokemueller at gmail.com> MFC after: 1 week
2015-04-11 18:45:22 +00:00
if (sc->synhw.capPassthrough)
synaptics_passthrough_on(sc);
for (i = 0; i < nitems(seq); i++) {
if (sc->synhw.capPassthrough &&
(seq[i] == 0xff || seq[i] == 0xe7))
if (send_aux_command(sc->kbdc, 0xe7) != PSM_ACK) {
synaptics_passthrough_off(sc);
return (EIO);
}
if (send_aux_command(sc->kbdc, seq[i]) != PSM_ACK) {
if (sc->synhw.capPassthrough)
synaptics_passthrough_off(sc);
Add preliminary support for IBM/Lenovo TrackPoint. PR: kern/147237 (based on the initial patch for 8.x) Tested by: glebius (device detection and suspend/resume) MFC after: 1 month
2013-03-18 23:22:47 +00:00
return (EIO);
Add support for controlling the trackpoint when Synaptics is enabled. To accomplish this, we must put the Synaptics hardware in passthrough mode when talking to the trackpoint. I only performed minor style modifications. Submitted by: Jan Kokemüller <jan.kokemueller at gmail.com> MFC after: 1 week
2015-04-11 18:45:22 +00:00
}
}
if (sc->synhw.capPassthrough)
synaptics_passthrough_off(sc);
Add preliminary support for IBM/Lenovo TrackPoint. PR: kern/147237 (based on the initial patch for 8.x) Tested by: glebius (device detection and suspend/resume) MFC after: 1 month
2013-03-18 23:22:47 +00:00
return (0);
}
#define PSM_TPINFO(x) offsetof(struct psm_softc, tpinfo.x)
#define TPMASK 0
#define TPLOC 1
#define TPINFO 2
static int
trackpoint_sysctl(SYSCTL_HANDLER_ARGS)
{
static const int data[][3] = {
{ 0x00, 0x4a, PSM_TPINFO(sensitivity) },
{ 0x00, 0x4d, PSM_TPINFO(inertia) },
{ 0x00, 0x60, PSM_TPINFO(uplateau) },
{ 0x00, 0x57, PSM_TPINFO(reach) },
{ 0x00, 0x58, PSM_TPINFO(draghys) },
{ 0x00, 0x59, PSM_TPINFO(mindrag) },
{ 0x00, 0x5a, PSM_TPINFO(upthresh) },
{ 0x00, 0x5c, PSM_TPINFO(threshold) },
{ 0x00, 0x5d, PSM_TPINFO(jenks) },
{ 0x00, 0x5e, PSM_TPINFO(ztime) },
{ 0x01, 0x2c, PSM_TPINFO(pts) },
{ 0x08, 0x2d, PSM_TPINFO(skipback) }
};
struct psm_softc *sc;
int error, newval, *oldvalp;
const int *tp;
if (arg1 == NULL || arg2 < 0 || arg2 >= nitems(data))
return (EINVAL);
sc = arg1;
tp = data[arg2];
oldvalp = (int *)((intptr_t)sc + tp[TPINFO]);
newval = *oldvalp;
error = sysctl_handle_int(oidp, &newval, 0, req);
if (error != 0)
return (error);
if (newval == *oldvalp)
return (0);
if (newval < 0 || newval > (tp[TPMASK] == 0 ? 255 : 1))
return (EINVAL);
Add support for controlling the trackpoint when Synaptics is enabled. To accomplish this, we must put the Synaptics hardware in passthrough mode when talking to the trackpoint. I only performed minor style modifications. Submitted by: Jan Kokemüller <jan.kokemueller at gmail.com> MFC after: 1 week
2015-04-11 18:45:22 +00:00
error = trackpoint_command(sc, tp[TPMASK] == 0 ? 0x81 : 0x47,
Add preliminary support for IBM/Lenovo TrackPoint. PR: kern/147237 (based on the initial patch for 8.x) Tested by: glebius (device detection and suspend/resume) MFC after: 1 month
2013-03-18 23:22:47 +00:00
tp[TPLOC], tp[TPMASK] == 0 ? newval : tp[TPMASK]);
if (error != 0)
return (error);
*oldvalp = newval;
return (0);
}
static void
trackpoint_sysctl_create_tree(struct psm_softc *sc)
{
if (sc->tpinfo.sysctl_tree != NULL)
return;
/* Attach extra trackpoint sysctl nodes under hw.psm.trackpoint */
sysctl_ctx_init(&sc->tpinfo.sysctl_ctx);
sc->tpinfo.sysctl_tree = SYSCTL_ADD_NODE(&sc->tpinfo.sysctl_ctx,
SYSCTL_STATIC_CHILDREN(_hw_psm), OID_AUTO, "trackpoint", CTLFLAG_RD,
0, "IBM/Lenovo TrackPoint");
/* hw.psm.trackpoint.sensitivity */
Add support for controlling the trackpoint when Synaptics is enabled. To accomplish this, we must put the Synaptics hardware in passthrough mode when talking to the trackpoint. I only performed minor style modifications. Submitted by: Jan Kokemüller <jan.kokemueller at gmail.com> MFC after: 1 week
2015-04-11 18:45:22 +00:00
sc->tpinfo.sensitivity = 0x80;
Add preliminary support for IBM/Lenovo TrackPoint. PR: kern/147237 (based on the initial patch for 8.x) Tested by: glebius (device detection and suspend/resume) MFC after: 1 month
2013-03-18 23:22:47 +00:00
SYSCTL_ADD_PROC(&sc->tpinfo.sysctl_ctx,
SYSCTL_CHILDREN(sc->tpinfo.sysctl_tree), OID_AUTO,
"sensitivity", CTLTYPE_INT|CTLFLAG_RW|CTLFLAG_ANYBODY,
sc, TRACKPOINT_SYSCTL_SENSITIVITY,
trackpoint_sysctl, "I",
"Sensitivity");
/* hw.psm.trackpoint.negative_inertia */
sc->tpinfo.inertia = 0x06;
SYSCTL_ADD_PROC(&sc->tpinfo.sysctl_ctx,
SYSCTL_CHILDREN(sc->tpinfo.sysctl_tree), OID_AUTO,
"negative_inertia", CTLTYPE_INT|CTLFLAG_RW|CTLFLAG_ANYBODY,
sc, TRACKPOINT_SYSCTL_NEGATIVE_INERTIA,
trackpoint_sysctl, "I",
"Negative inertia factor");
/* hw.psm.trackpoint.upper_plateau */
sc->tpinfo.uplateau = 0x61;
SYSCTL_ADD_PROC(&sc->tpinfo.sysctl_ctx,
SYSCTL_CHILDREN(sc->tpinfo.sysctl_tree), OID_AUTO,
"upper_plateau", CTLTYPE_INT|CTLFLAG_RW|CTLFLAG_ANYBODY,
sc, TRACKPOINT_SYSCTL_UPPER_PLATEAU,
trackpoint_sysctl, "I",
"Transfer function upper plateau speed");
/* hw.psm.trackpoint.backup_range */
sc->tpinfo.reach = 0x0a;
SYSCTL_ADD_PROC(&sc->tpinfo.sysctl_ctx,
SYSCTL_CHILDREN(sc->tpinfo.sysctl_tree), OID_AUTO,
"backup_range", CTLTYPE_INT|CTLFLAG_RW|CTLFLAG_ANYBODY,
sc, TRACKPOINT_SYSCTL_BACKUP_RANGE,
trackpoint_sysctl, "I",
"Backup range");
/* hw.psm.trackpoint.drag_hysteresis */
sc->tpinfo.draghys = 0xff;
SYSCTL_ADD_PROC(&sc->tpinfo.sysctl_ctx,
SYSCTL_CHILDREN(sc->tpinfo.sysctl_tree), OID_AUTO,
"drag_hysteresis", CTLTYPE_INT|CTLFLAG_RW|CTLFLAG_ANYBODY,
sc, TRACKPOINT_SYSCTL_DRAG_HYSTERESIS,
trackpoint_sysctl, "I",
"Drag hysteresis");
/* hw.psm.trackpoint.minimum_drag */
sc->tpinfo.mindrag = 0x14;
SYSCTL_ADD_PROC(&sc->tpinfo.sysctl_ctx,
SYSCTL_CHILDREN(sc->tpinfo.sysctl_tree), OID_AUTO,
"minimum_drag", CTLTYPE_INT|CTLFLAG_RW|CTLFLAG_ANYBODY,
sc, TRACKPOINT_SYSCTL_MINIMUM_DRAG,
trackpoint_sysctl, "I",
"Minimum drag");
/* hw.psm.trackpoint.up_threshold */
sc->tpinfo.upthresh = 0xff;
SYSCTL_ADD_PROC(&sc->tpinfo.sysctl_ctx,
SYSCTL_CHILDREN(sc->tpinfo.sysctl_tree), OID_AUTO,
"up_threshold", CTLTYPE_INT|CTLFLAG_RW|CTLFLAG_ANYBODY,
sc, TRACKPOINT_SYSCTL_UP_THRESHOLD,
trackpoint_sysctl, "I",
"Up threshold for release");
/* hw.psm.trackpoint.threshold */
sc->tpinfo.threshold = 0x08;
SYSCTL_ADD_PROC(&sc->tpinfo.sysctl_ctx,
SYSCTL_CHILDREN(sc->tpinfo.sysctl_tree), OID_AUTO,
"threshold", CTLTYPE_INT|CTLFLAG_RW|CTLFLAG_ANYBODY,
sc, TRACKPOINT_SYSCTL_THRESHOLD,
trackpoint_sysctl, "I",
"Threshold");
/* hw.psm.trackpoint.jenks_curvature */
sc->tpinfo.jenks = 0x87;
SYSCTL_ADD_PROC(&sc->tpinfo.sysctl_ctx,
SYSCTL_CHILDREN(sc->tpinfo.sysctl_tree), OID_AUTO,
"jenks_curvature", CTLTYPE_INT|CTLFLAG_RW|CTLFLAG_ANYBODY,
sc, TRACKPOINT_SYSCTL_JENKS_CURVATURE,
trackpoint_sysctl, "I",
"Jenks curvature");
/* hw.psm.trackpoint.z_time */
sc->tpinfo.ztime = 0x26;
SYSCTL_ADD_PROC(&sc->tpinfo.sysctl_ctx,
SYSCTL_CHILDREN(sc->tpinfo.sysctl_tree), OID_AUTO,
"z_time", CTLTYPE_INT|CTLFLAG_RW|CTLFLAG_ANYBODY,
sc, TRACKPOINT_SYSCTL_Z_TIME,
trackpoint_sysctl, "I",
"Z time constant");
/* hw.psm.trackpoint.press_to_select */
sc->tpinfo.pts = 0x00;
SYSCTL_ADD_PROC(&sc->tpinfo.sysctl_ctx,
SYSCTL_CHILDREN(sc->tpinfo.sysctl_tree), OID_AUTO,
"press_to_select", CTLTYPE_INT|CTLFLAG_RW|CTLFLAG_ANYBODY,
sc, TRACKPOINT_SYSCTL_PRESS_TO_SELECT,
trackpoint_sysctl, "I",
"Press to Select");
/* hw.psm.trackpoint.skip_backups */
sc->tpinfo.skipback = 0x00;
SYSCTL_ADD_PROC(&sc->tpinfo.sysctl_ctx,
SYSCTL_CHILDREN(sc->tpinfo.sysctl_tree), OID_AUTO,
"skip_backups", CTLTYPE_INT|CTLFLAG_RW|CTLFLAG_ANYBODY,
sc, TRACKPOINT_SYSCTL_SKIP_BACKUPS,
trackpoint_sysctl, "I",
"Skip backups from drags");
}
Add support for controlling the trackpoint when Synaptics is enabled. To accomplish this, we must put the Synaptics hardware in passthrough mode when talking to the trackpoint. I only performed minor style modifications. Submitted by: Jan Kokemüller <jan.kokemueller at gmail.com> MFC after: 1 week
2015-04-11 18:45:22 +00:00
static void
set_trackpoint_parameters(struct psm_softc *sc)
{
trackpoint_command(sc, 0x81, 0x4a, sc->tpinfo.sensitivity);
trackpoint_command(sc, 0x81, 0x60, sc->tpinfo.uplateau);
trackpoint_command(sc, 0x81, 0x4d, sc->tpinfo.inertia);
trackpoint_command(sc, 0x81, 0x57, sc->tpinfo.reach);
trackpoint_command(sc, 0x81, 0x58, sc->tpinfo.draghys);
trackpoint_command(sc, 0x81, 0x59, sc->tpinfo.mindrag);
trackpoint_command(sc, 0x81, 0x5a, sc->tpinfo.upthresh);
trackpoint_command(sc, 0x81, 0x5c, sc->tpinfo.threshold);
trackpoint_command(sc, 0x81, 0x5d, sc->tpinfo.jenks);
trackpoint_command(sc, 0x81, 0x5e, sc->tpinfo.ztime);
if (sc->tpinfo.pts == 0x01)
trackpoint_command(sc, 0x47, 0x2c, 0x01);
if (sc->tpinfo.skipback == 0x01)
trackpoint_command(sc, 0x47, 0x2d, 0x08);
}
Add preliminary support for IBM/Lenovo TrackPoint. PR: kern/147237 (based on the initial patch for 8.x) Tested by: glebius (device detection and suspend/resume) MFC after: 1 month
2013-03-18 23:22:47 +00:00
static int
Unbreak mouse on resume on Thinkpads when hw.psm.trackpoint_support=0, which is default. It was broken in r281441. It appears that set_trackpoint_parameters() call on resume disables the mouse. So, we need not call it on resume if hw.psm.trackpoint_support=0. The problem is that the probe functions are used both for probing and for reiniting on resume. And the absense of the softc parameter is used as a mark to distinguish reinit and probe, which is quite ugly. At the same time the softc parameter is needed to call set_trackpoint_parameters(). o Change the arguments of probefunc_t to always supply the softc, and use additional enum argument to tell probing from initing. o Don't call set_trackpoint_parameters() from global doinitialize(), instead call it from the enable_trackpoint() only. o In enable_synaptics() call enable_trackpoint() in both probe and reinit cases. Together with: Jan Kokemüller <jan.kokemueller gmail.com>
2015-06-12 13:57:04 +00:00
enable_trackpoint(struct psm_softc *sc, enum probearg arg)
Add preliminary support for IBM/Lenovo TrackPoint. PR: kern/147237 (based on the initial patch for 8.x) Tested by: glebius (device detection and suspend/resume) MFC after: 1 month
2013-03-18 23:22:47 +00:00
{
Unbreak mouse on resume on Thinkpads when hw.psm.trackpoint_support=0, which is default. It was broken in r281441. It appears that set_trackpoint_parameters() call on resume disables the mouse. So, we need not call it on resume if hw.psm.trackpoint_support=0. The problem is that the probe functions are used both for probing and for reiniting on resume. And the absense of the softc parameter is used as a mark to distinguish reinit and probe, which is quite ugly. At the same time the softc parameter is needed to call set_trackpoint_parameters(). o Change the arguments of probefunc_t to always supply the softc, and use additional enum argument to tell probing from initing. o Don't call set_trackpoint_parameters() from global doinitialize(), instead call it from the enable_trackpoint() only. o In enable_synaptics() call enable_trackpoint() in both probe and reinit cases. Together with: Jan Kokemüller <jan.kokemueller gmail.com>
2015-06-12 13:57:04 +00:00
KBDC kbdc = sc->kbdc;
Add preliminary support for IBM/Lenovo TrackPoint. PR: kern/147237 (based on the initial patch for 8.x) Tested by: glebius (device detection and suspend/resume) MFC after: 1 month
2013-03-18 23:22:47 +00:00
int id;
Synaptics: fix a problem with trackpoint passthrough. There was a inconsistency which led to enable passthrough commands being interpreted as actual touchpad commands. Submitted by: Jan Kokemüller <jan.kokemueller at gmail.com> MFC after: 1 week
2015-06-19 00:10:30 +00:00
/*
* If called from enable_synaptics(), make sure that passthrough
* mode is enabled so we can reach the trackpoint.
* However, passthrough mode must be disabled before setting the
* trackpoint parameters, as rackpoint_command() enables and disables
* passthrough mode on its own.
*/
if (sc->synhw.capPassthrough)
synaptics_passthrough_on(sc);
Add preliminary support for IBM/Lenovo TrackPoint. PR: kern/147237 (based on the initial patch for 8.x) Tested by: glebius (device detection and suspend/resume) MFC after: 1 month
2013-03-18 23:22:47 +00:00
if (send_aux_command(kbdc, 0xe1) != PSM_ACK ||
read_aux_data(kbdc) != 0x01)
Synaptics: fix a problem with trackpoint passthrough. There was a inconsistency which led to enable passthrough commands being interpreted as actual touchpad commands. Submitted by: Jan Kokemüller <jan.kokemueller at gmail.com> MFC after: 1 week
2015-06-19 00:10:30 +00:00
goto no_trackpoint;
Add preliminary support for IBM/Lenovo TrackPoint. PR: kern/147237 (based on the initial patch for 8.x) Tested by: glebius (device detection and suspend/resume) MFC after: 1 month
2013-03-18 23:22:47 +00:00
id = read_aux_data(kbdc);
if (id < 0x01)
Synaptics: fix a problem with trackpoint passthrough. There was a inconsistency which led to enable passthrough commands being interpreted as actual touchpad commands. Submitted by: Jan Kokemüller <jan.kokemueller at gmail.com> MFC after: 1 week
2015-06-19 00:10:30 +00:00
goto no_trackpoint;
Fix miss from r284320. Coverity: 1018895
2015-06-16 15:39:34 +00:00
if (arg == PROBE)
Add preliminary support for IBM/Lenovo TrackPoint. PR: kern/147237 (based on the initial patch for 8.x) Tested by: glebius (device detection and suspend/resume) MFC after: 1 month
2013-03-18 23:22:47 +00:00
sc->tphw = id;
if (!trackpoint_support)
Synaptics: fix a problem with trackpoint passthrough. There was a inconsistency which led to enable passthrough commands being interpreted as actual touchpad commands. Submitted by: Jan Kokemüller <jan.kokemueller at gmail.com> MFC after: 1 week
2015-06-19 00:10:30 +00:00
goto no_trackpoint;
if (sc->synhw.capPassthrough)
synaptics_passthrough_off(sc);
Add preliminary support for IBM/Lenovo TrackPoint. PR: kern/147237 (based on the initial patch for 8.x) Tested by: glebius (device detection and suspend/resume) MFC after: 1 month
2013-03-18 23:22:47 +00:00
Unbreak mouse on resume on Thinkpads when hw.psm.trackpoint_support=0, which is default. It was broken in r281441. It appears that set_trackpoint_parameters() call on resume disables the mouse. So, we need not call it on resume if hw.psm.trackpoint_support=0. The problem is that the probe functions are used both for probing and for reiniting on resume. And the absense of the softc parameter is used as a mark to distinguish reinit and probe, which is quite ugly. At the same time the softc parameter is needed to call set_trackpoint_parameters(). o Change the arguments of probefunc_t to always supply the softc, and use additional enum argument to tell probing from initing. o Don't call set_trackpoint_parameters() from global doinitialize(), instead call it from the enable_trackpoint() only. o In enable_synaptics() call enable_trackpoint() in both probe and reinit cases. Together with: Jan Kokemüller <jan.kokemueller gmail.com>
2015-06-12 13:57:04 +00:00
if (arg == PROBE) {
Add preliminary support for IBM/Lenovo TrackPoint. PR: kern/147237 (based on the initial patch for 8.x) Tested by: glebius (device detection and suspend/resume) MFC after: 1 month
2013-03-18 23:22:47 +00:00
trackpoint_sysctl_create_tree(sc);
Add support for controlling the trackpoint when Synaptics is enabled. To accomplish this, we must put the Synaptics hardware in passthrough mode when talking to the trackpoint. I only performed minor style modifications. Submitted by: Jan Kokemüller <jan.kokemueller at gmail.com> MFC after: 1 week
2015-04-11 18:45:22 +00:00
/*
* Don't overwrite hwid and buttons when we are
* a guest device.
*/
if (!sc->synhw.capPassthrough) {
sc->hw.hwid = id;
sc->hw.buttons = 3;
}
Add preliminary support for IBM/Lenovo TrackPoint. PR: kern/147237 (based on the initial patch for 8.x) Tested by: glebius (device detection and suspend/resume) MFC after: 1 month
2013-03-18 23:22:47 +00:00
}
Unbreak mouse on resume on Thinkpads when hw.psm.trackpoint_support=0, which is default. It was broken in r281441. It appears that set_trackpoint_parameters() call on resume disables the mouse. So, we need not call it on resume if hw.psm.trackpoint_support=0. The problem is that the probe functions are used both for probing and for reiniting on resume. And the absense of the softc parameter is used as a mark to distinguish reinit and probe, which is quite ugly. At the same time the softc parameter is needed to call set_trackpoint_parameters(). o Change the arguments of probefunc_t to always supply the softc, and use additional enum argument to tell probing from initing. o Don't call set_trackpoint_parameters() from global doinitialize(), instead call it from the enable_trackpoint() only. o In enable_synaptics() call enable_trackpoint() in both probe and reinit cases. Together with: Jan Kokemüller <jan.kokemueller gmail.com>
2015-06-12 13:57:04 +00:00
set_trackpoint_parameters(sc);
Add preliminary support for IBM/Lenovo TrackPoint. PR: kern/147237 (based on the initial patch for 8.x) Tested by: glebius (device detection and suspend/resume) MFC after: 1 month
2013-03-18 23:22:47 +00:00
return (TRUE);
Synaptics: fix a problem with trackpoint passthrough. There was a inconsistency which led to enable passthrough commands being interpreted as actual touchpad commands. Submitted by: Jan Kokemüller <jan.kokemueller at gmail.com> MFC after: 1 week
2015-06-19 00:10:30 +00:00
no_trackpoint:
if (sc->synhw.capPassthrough)
synaptics_passthrough_off(sc);
return (FALSE);
Add preliminary support for IBM/Lenovo TrackPoint. PR: kern/147237 (based on the initial patch for 8.x) Tested by: glebius (device detection and suspend/resume) MFC after: 1 month
2013-03-18 23:22:47 +00:00
}
Recognize Interlink VersaPad. `Tap' action will be recognized as the button 4. Submitted by: Masachika ISHIZUKA <ishizuka@ish.org>
1999-08-17 12:14:13 +00:00
/* Interlink electronics VersaPad */
static int
Unbreak mouse on resume on Thinkpads when hw.psm.trackpoint_support=0, which is default. It was broken in r281441. It appears that set_trackpoint_parameters() call on resume disables the mouse. So, we need not call it on resume if hw.psm.trackpoint_support=0. The problem is that the probe functions are used both for probing and for reiniting on resume. And the absense of the softc parameter is used as a mark to distinguish reinit and probe, which is quite ugly. At the same time the softc parameter is needed to call set_trackpoint_parameters(). o Change the arguments of probefunc_t to always supply the softc, and use additional enum argument to tell probing from initing. o Don't call set_trackpoint_parameters() from global doinitialize(), instead call it from the enable_trackpoint() only. o In enable_synaptics() call enable_trackpoint() in both probe and reinit cases. Together with: Jan Kokemüller <jan.kokemueller gmail.com>
2015-06-12 13:57:04 +00:00
enable_versapad(struct psm_softc *sc, enum probearg arg)
Recognize Interlink VersaPad. `Tap' action will be recognized as the button 4. Submitted by: Masachika ISHIZUKA <ishizuka@ish.org>
1999-08-17 12:14:13 +00:00
{
Unbreak mouse on resume on Thinkpads when hw.psm.trackpoint_support=0, which is default. It was broken in r281441. It appears that set_trackpoint_parameters() call on resume disables the mouse. So, we need not call it on resume if hw.psm.trackpoint_support=0. The problem is that the probe functions are used both for probing and for reiniting on resume. And the absense of the softc parameter is used as a mark to distinguish reinit and probe, which is quite ugly. At the same time the softc parameter is needed to call set_trackpoint_parameters(). o Change the arguments of probefunc_t to always supply the softc, and use additional enum argument to tell probing from initing. o Don't call set_trackpoint_parameters() from global doinitialize(), instead call it from the enable_trackpoint() only. o In enable_synaptics() call enable_trackpoint() in both probe and reinit cases. Together with: Jan Kokemüller <jan.kokemueller gmail.com>
2015-06-12 13:57:04 +00:00
KBDC kbdc = sc->kbdc;
Clean up and fix style(9) nits.
2008-04-08 19:09:45 +00:00
int data[3];
set_mouse_resolution(kbdc, PSMD_RES_MEDIUM_HIGH); /* set res. 2 */
set_mouse_sampling_rate(kbdc, 100); /* set rate 100 */
set_mouse_scaling(kbdc, 1); /* set scale 1:1 */
set_mouse_scaling(kbdc, 1); /* set scale 1:1 */
set_mouse_scaling(kbdc, 1); /* set scale 1:1 */
set_mouse_scaling(kbdc, 1); /* set scale 1:1 */
if (get_mouse_status(kbdc, data, 0, 3) < 3) /* get status */
return (FALSE);
if (data[2] != 0xa || data[1] != 0 ) /* rate == 0xa && res. == 0 */
return (FALSE);
set_mouse_scaling(kbdc, 1); /* set scale 1:1 */
return (TRUE); /* PS/2 absolute mode */
Recognize Interlink VersaPad. `Tap' action will be recognized as the button 4. Submitted by: Masachika ISHIZUKA <ishizuka@ish.org>
1999-08-17 12:14:13 +00:00
}
- Hook up the new locations of the atkbdc(4), atkbd(4) and psm(4) source files after they were repo-copied to sys/dev/atkbdc. The sources of atkbdc(4) and its children were moved to the new location in preparation for adding an EBus front-end to atkbdc(4) for use on sparc64; i.e. in order to not further scatter them over the whole tree which would have been the result of adding atkbdc_ebus.c in e.g. sys/sparc64/ebus. Another reason for the repo-copies was that some of the sources were misfiled, e.g. sys/isa/atkbd_isa.c wasn't ISA-specific at all but for hanging atkbd(4) off of atkbdc(4) and was renamed to atkbd_atkbdc.c accordingly. Most of sys/isa/psm.c, i.e. expect for its PSMC PNP part, also isn't ISA-specific. - Separate the parts of atkbdc_isa.c which aren't actually ISA-specific but are shareable between different atkbdc(4) bus front-ends into atkbdc_subr.c (repo-copied from atkbdc_isa.c). While here use bus_generic_rl_alloc_resource() and bus_generic_rl_release_resource() respectively in atkbdc_isa.c instead of rolling own versions. - Add sparc64 MD bits to atkbdc(4) and atkbd(4) and an EBus front-end for atkbdc(4). PS/2 controllers and input devices are used on a couple of Sun OEM boards and occur on either the EBus or the ISA bus. Depending on the board it's either the only on-board mean to connect a keyboard and mouse or an alternative to either RS232 or USB devices. - Wrap the PSMC PNP part of psm.c in #ifdef DEV_ISA so it can be compiled without isa(4) (e.g. for EBus-only machines). This ISA-specific part isn't separated into its own source file, yet, as it requires more work than was feasible for 6.0 in order to do it in a clean way. Actually philip@ is working on a rewrite of psm(4) so a more comprehensive clean-up and separation of hardware dependent and independent parts is expected to happen after 6.0. Tested on: i386, sparc64 (AX1105, AXe and AXi boards) Reviewed by: philip
2005-06-10 20:56:38 +00:00
/*
* Return true if 'now' is earlier than (start + (secs.usecs)).
* Now may be NULL and the function will fetch the current time from
* getmicrouptime(), or a cached 'now' can be passed in.
* All values should be numbers derived from getmicrouptime().
*/
static int
timeelapsed(start, secs, usecs, now)
const struct timeval *start, *now;
int secs, usecs;
{
struct timeval snow, tv;
/* if there is no 'now' passed in, the get it as a convience. */
if (now == NULL) {
getmicrouptime(&snow);
now = &snow;
}
Clean up and fix style(9) nits.
2008-04-08 19:09:45 +00:00
- Hook up the new locations of the atkbdc(4), atkbd(4) and psm(4) source files after they were repo-copied to sys/dev/atkbdc. The sources of atkbdc(4) and its children were moved to the new location in preparation for adding an EBus front-end to atkbdc(4) for use on sparc64; i.e. in order to not further scatter them over the whole tree which would have been the result of adding atkbdc_ebus.c in e.g. sys/sparc64/ebus. Another reason for the repo-copies was that some of the sources were misfiled, e.g. sys/isa/atkbd_isa.c wasn't ISA-specific at all but for hanging atkbd(4) off of atkbdc(4) and was renamed to atkbd_atkbdc.c accordingly. Most of sys/isa/psm.c, i.e. expect for its PSMC PNP part, also isn't ISA-specific. - Separate the parts of atkbdc_isa.c which aren't actually ISA-specific but are shareable between different atkbdc(4) bus front-ends into atkbdc_subr.c (repo-copied from atkbdc_isa.c). While here use bus_generic_rl_alloc_resource() and bus_generic_rl_release_resource() respectively in atkbdc_isa.c instead of rolling own versions. - Add sparc64 MD bits to atkbdc(4) and atkbd(4) and an EBus front-end for atkbdc(4). PS/2 controllers and input devices are used on a couple of Sun OEM boards and occur on either the EBus or the ISA bus. Depending on the board it's either the only on-board mean to connect a keyboard and mouse or an alternative to either RS232 or USB devices. - Wrap the PSMC PNP part of psm.c in #ifdef DEV_ISA so it can be compiled without isa(4) (e.g. for EBus-only machines). This ISA-specific part isn't separated into its own source file, yet, as it requires more work than was feasible for 6.0 in order to do it in a clean way. Actually philip@ is working on a rewrite of psm(4) so a more comprehensive clean-up and separation of hardware dependent and independent parts is expected to happen after 6.0. Tested on: i386, sparc64 (AX1105, AXe and AXi boards) Reviewed by: philip
2005-06-10 20:56:38 +00:00
tv.tv_sec = secs;
tv.tv_usec = usecs;
timevaladd(&tv, start);
return (timevalcmp(&tv, now, <));
}
Port the ps/2 mouse driver to the alpha.
1998-11-08 18:43:03 +00:00
static int
- Add the device resume method. It supercedes the existing resume routine which hooks the apm driver. - Rename the PSM_HOOKAPM option to PSM_HOOKRESUME. - Delete unnecessary #include.
1999-12-15 10:04:05 +00:00
psmresume(device_t dev)
Port the ps/2 mouse driver to the alpha.
1998-11-08 18:43:03 +00:00
{
Clean up and fix style(9) nits.
2008-04-08 19:09:45 +00:00
struct psm_softc *sc = device_get_softc(dev);
int unit = device_get_unit(dev);
int err;
Port the ps/2 mouse driver to the alpha.
1998-11-08 18:43:03 +00:00
Clean up and fix style(9) nits.
2008-04-08 19:09:45 +00:00
VLOG(2, (LOG_NOTICE, "psm%d: system resume hook called.\n", unit));
Port the ps/2 mouse driver to the alpha.
1998-11-08 18:43:03 +00:00
- Do not clobber softc when psm(4) is reintialized. - Make INITAFTERSUSPEND flag independent of HOOKRESUME flag. - Automatically set INITAFTERSUSPEND flag when ALPS GlidePoint is detected. - Always probe Synaptics Touchpad. Allow MOUSE_SYN_GETHWINFO ioctl and automatically set INITAFTERSUSPEND flag when a supported device is detected, regardless of "hw.psm.synaptics_support" tunable setting. - Update psm(4) to reflect the above changes. - Remove long-time defunct SYNCHACK flag while I am in the neighborhood. MFC after: 1 month
2012-03-27 23:43:01 +00:00
if ((sc->config &
(PSM_CONFIG_HOOKRESUME | PSM_CONFIG_INITAFTERSUSPEND)) == 0)
Clean up and fix style(9) nits.
2008-04-08 19:09:45 +00:00
return (0);
- Add Support for the following PS/2 mice: - Microsoft IntelliMouse Explorer: 2 buttons on top, 2 side buttons and a wheel which also acts as the middle button. The mouse is recognized as "IntelliMouse Explorer". - Genius NetScroll Optical: 2 buttons on top, 2 side buttons and a wheel which also acts as the middle button. The mouse is recognized as "NetMouse/NetScroll Optical". - MouseSystems SmartScroll Mouse (OEM from Genius?): 3 buttons on top, 1 side button and a wheel. The mouse is recognized as Genius "NetScroll". - IBM ScrollPoint: 2 buttons on top and a stick between the buttons. The stick can perform "horizontal scroll" in W*ndows environment. The horizontal movement of the stick is detected. It is currently mapped to the Z axis movement in the same way as the first wheel. The mouse is recognized as "MouseMan+", as it is considered to be a variation of MouseMan. - A4 Tech 4D and 4D+ mice. These mice have two wheels! The movement of the second wheel is reported as the Z axis movement in the same way as the first wheel. These mice are recognized as "4D Mouse" and "4D+ Mouse". - Tweak IntelliMouse support code a bit so that less-than-compatible wheel mice can work properly with the psm driver. - Add driver configuration flags which correspond to the kernel options PSM_HOOKRESUME and PSM_RESETAFTERSUSPEND, so that we don't need to recompile the kernel when we need these functions. - Properly keep track of the irq resource. - Add a watchdog timer in case interrupts are lost (experimental). - Add `detach' function (experimental).
2000-03-18 15:21:40 +00:00
Clean up and fix style(9) nits.
2008-04-08 19:09:45 +00:00
err = reinitialize(sc, sc->config & PSM_CONFIG_INITAFTERSUSPEND);
Port the ps/2 mouse driver to the alpha.
1998-11-08 18:43:03 +00:00
Clean up and fix style(9) nits.
2008-04-08 19:09:45 +00:00
if ((sc->state & PSM_ASLP) && !(sc->state & PSM_VALID)) {
/*
* Release the blocked process; it must be notified that
* the device cannot be accessed anymore.
*/
sc->state &= ~PSM_ASLP;
wakeup(sc);
}
Port the ps/2 mouse driver to the alpha.
1998-11-08 18:43:03 +00:00
Clean up and fix style(9) nits.
2008-04-08 19:09:45 +00:00
VLOG(2, (LOG_DEBUG, "psm%d: system resume hook exiting.\n", unit));
Port the ps/2 mouse driver to the alpha.
1998-11-08 18:43:03 +00:00
Clean up and fix style(9) nits.
2008-04-08 19:09:45 +00:00
return (err);
Port the ps/2 mouse driver to the alpha.
1998-11-08 18:43:03 +00:00
}
Use DEVICE_MODULE() directly instead of DEV_DRIVER_MODULE. psm.c uses make_dev() already.
1999-11-08 07:29:23 +00:00
DRIVER_MODULE(psm, atkbdc, psm_driver, psm_devclass, 0, 0);
Update the atkbdc, atkbd, and psm drivers to probe/attach more cleanly and consistently in all APCI, PnP BIOS, and "hint" cases. NOTE: this doesn't necessarily solve the problem that the PS/2 mouse is not detected after the recent ACPI update.
2001-09-06 12:09:26 +00:00
- Hook up the new locations of the atkbdc(4), atkbd(4) and psm(4) source files after they were repo-copied to sys/dev/atkbdc. The sources of atkbdc(4) and its children were moved to the new location in preparation for adding an EBus front-end to atkbdc(4) for use on sparc64; i.e. in order to not further scatter them over the whole tree which would have been the result of adding atkbdc_ebus.c in e.g. sys/sparc64/ebus. Another reason for the repo-copies was that some of the sources were misfiled, e.g. sys/isa/atkbd_isa.c wasn't ISA-specific at all but for hanging atkbd(4) off of atkbdc(4) and was renamed to atkbd_atkbdc.c accordingly. Most of sys/isa/psm.c, i.e. expect for its PSMC PNP part, also isn't ISA-specific. - Separate the parts of atkbdc_isa.c which aren't actually ISA-specific but are shareable between different atkbdc(4) bus front-ends into atkbdc_subr.c (repo-copied from atkbdc_isa.c). While here use bus_generic_rl_alloc_resource() and bus_generic_rl_release_resource() respectively in atkbdc_isa.c instead of rolling own versions. - Add sparc64 MD bits to atkbdc(4) and atkbd(4) and an EBus front-end for atkbdc(4). PS/2 controllers and input devices are used on a couple of Sun OEM boards and occur on either the EBus or the ISA bus. Depending on the board it's either the only on-board mean to connect a keyboard and mouse or an alternative to either RS232 or USB devices. - Wrap the PSMC PNP part of psm.c in #ifdef DEV_ISA so it can be compiled without isa(4) (e.g. for EBus-only machines). This ISA-specific part isn't separated into its own source file, yet, as it requires more work than was feasible for 6.0 in order to do it in a clean way. Actually philip@ is working on a rewrite of psm(4) so a more comprehensive clean-up and separation of hardware dependent and independent parts is expected to happen after 6.0. Tested on: i386, sparc64 (AX1105, AXe and AXi boards) Reviewed by: philip
2005-06-10 20:56:38 +00:00
#ifdef DEV_ISA
Update the atkbdc, atkbd, and psm drivers to probe/attach more cleanly and consistently in all APCI, PnP BIOS, and "hint" cases. NOTE: this doesn't necessarily solve the problem that the PS/2 mouse is not detected after the recent ACPI update.
2001-09-06 12:09:26 +00:00
/*
* This sucks up assignments from PNPBIOS and ACPI.
*/
Yet another turn of workaround for psm/ACPI/PnP BIOS problems currently experienced in -CURRENT. This should fix the problem that the PS/2 mouse is detected twice if the acpi module is not loaded on some systems.
2001-09-25 16:59:28 +00:00
/*
* When the PS/2 mouse device is reported by ACPI or PnP BIOS, it may
* appear BEFORE the AT keyboard controller. As the PS/2 mouse device
* can be probed and attached only after the AT keyboard controller is
* attached, we shall quietly reserve the IRQ resource for later use.
* If the PS/2 mouse device is reported to us AFTER the keyboard controller,
* copy the IRQ resource to the PS/2 mouse device instance hanging
* under the keyboard controller, then probe and attach it.
*/
Update the atkbdc, atkbd, and psm drivers to probe/attach more cleanly and consistently in all APCI, PnP BIOS, and "hint" cases. NOTE: this doesn't necessarily solve the problem that the PS/2 mouse is not detected after the recent ACPI update.
2001-09-06 12:09:26 +00:00
static devclass_t psmcpnp_devclass;
static device_probe_t psmcpnp_probe;
static device_attach_t psmcpnp_attach;
static device_method_t psmcpnp_methods[] = {
DEVMETHOD(device_probe, psmcpnp_probe),
DEVMETHOD(device_attach, psmcpnp_attach),
Clean up and fix style(9) nits.
2008-04-08 19:09:45 +00:00
Update the atkbdc, atkbd, and psm drivers to probe/attach more cleanly and consistently in all APCI, PnP BIOS, and "hint" cases. NOTE: this doesn't necessarily solve the problem that the PS/2 mouse is not detected after the recent ACPI update.
2001-09-06 12:09:26 +00:00
{ 0, 0 }
};
static driver_t psmcpnp_driver = {
PSMCPNP_DRIVER_NAME,
psmcpnp_methods,
1, /* no softc */
};
static struct isa_pnp_id psmcpnp_ids[] = {
Add another PS2 PNP id. PR: 32973 Submitted by: KT Sin <ktsin@acm.org>
2001-12-19 13:32:21 +00:00
{ 0x030fd041, "PS/2 mouse port" }, /* PNP0F03 */
Add ALPS glide point ID and some compatibility IDs. PR: kern/75008
2006-03-15 07:04:33 +00:00
{ 0x0e0fd041, "PS/2 mouse port" }, /* PNP0F0E */
{ 0x120fd041, "PS/2 mouse port" }, /* PNP0F12 */
Update the atkbdc, atkbd, and psm drivers to probe/attach more cleanly and consistently in all APCI, PnP BIOS, and "hint" cases. NOTE: this doesn't necessarily solve the problem that the PS/2 mouse is not detected after the recent ACPI update.
2001-09-06 12:09:26 +00:00
{ 0x130fd041, "PS/2 mouse port" }, /* PNP0F13 */
{ 0x1303d041, "PS/2 port" }, /* PNP0313, XXX */
Add PnP PS/2 id for Dell Latitude X200. PR: 48516 MFC after: 2 weeks
2003-07-01 14:41:16 +00:00
{ 0x02002e4f, "Dell PS/2 mouse port" }, /* Lat. X200, Dell */
Add ALPS glide point ID and some compatibility IDs. PR: kern/75008
2006-03-15 07:04:33 +00:00
{ 0x0002a906, "ALPS Glide Point" }, /* ALPS Glide Point */
Refine ACPI/PnP BIOS probe/attach routines a bit. - Add workaround for the problematic PnP BIOS which does not assign irq resource for the PS/2 mouse device node; if there is no irq assigned for the PS/2 mouse node, refer to device.hints for an irq number. If we still don't find an irq number in the hints database, use a hard-coded value. - Delete unused ivars. - Bit of clean up in probe/attach. - Add PnP ID for the PS/2 mouse port on some IBM ThinkPad models.
2001-09-15 04:38:20 +00:00
{ 0x80374d24, "IBM PS/2 mouse port" }, /* IBM3780, ThinkPad */
Add PnP ID 'IBM3781' for TP240 mouse.
2001-10-03 07:26:28 +00:00
{ 0x81374d24, "IBM PS/2 mouse port" }, /* IBM3781, ThinkPad */
Add yet another Sony Vaio PS/2 mouse ID. This one is found on a VX88. Submitted by: marcel
2003-01-22 03:31:08 +00:00
{ 0x0190d94d, "SONY VAIO PS/2 mouse port"}, /* SNY9001, Vaio */
{ 0x0290d94d, "SONY VAIO PS/2 mouse port"}, /* SNY9002, Vaio */
YAM: This id is found in a Sony Vaio GRX-670. When will this end? Submitted by: Chuck McCrobie <mccrobie2000@yahoo.com>
2003-01-22 22:02:09 +00:00
{ 0x0390d94d, "SONY VAIO PS/2 mouse port"}, /* SNY9003, Vaio */
Add yet another Sony Vaio PS/2 mouse ID. This one is found on a VX88. Submitted by: marcel
2003-01-22 03:31:08 +00:00
{ 0x0490d94d, "SONY VAIO PS/2 mouse port"}, /* SNY9004, Vaio */
Update the atkbdc, atkbd, and psm drivers to probe/attach more cleanly and consistently in all APCI, PnP BIOS, and "hint" cases. NOTE: this doesn't necessarily solve the problem that the PS/2 mouse is not detected after the recent ACPI update.
2001-09-06 12:09:26 +00:00
{ 0 }
};
static int
create_a_copy(device_t atkbdc, device_t me)
{
device_t psm;
u_long irq;
Yet another turn of workaround for psm/ACPI/PnP BIOS problems currently experienced in -CURRENT. This should fix the problem that the PS/2 mouse is detected twice if the acpi module is not loaded on some systems.
2001-09-25 16:59:28 +00:00
/* find the PS/2 mouse device instance under the keyboard controller */
psm = device_find_child(atkbdc, PSM_DRIVER_NAME,
Clean up and fix style(9) nits.
2008-04-08 19:09:45 +00:00
device_get_unit(atkbdc));
Update the atkbdc, atkbd, and psm drivers to probe/attach more cleanly and consistently in all APCI, PnP BIOS, and "hint" cases. NOTE: this doesn't necessarily solve the problem that the PS/2 mouse is not detected after the recent ACPI update.
2001-09-06 12:09:26 +00:00
if (psm == NULL)
Clean up and fix style(9) nits.
2008-04-08 19:09:45 +00:00
return (ENXIO);
Yet another turn of workaround for psm/ACPI/PnP BIOS problems currently experienced in -CURRENT. This should fix the problem that the PS/2 mouse is detected twice if the acpi module is not loaded on some systems.
2001-09-25 16:59:28 +00:00
if (device_get_state(psm) != DS_NOTPRESENT)
Clean up and fix style(9) nits.
2008-04-08 19:09:45 +00:00
return (0);
Update the atkbdc, atkbd, and psm drivers to probe/attach more cleanly and consistently in all APCI, PnP BIOS, and "hint" cases. NOTE: this doesn't necessarily solve the problem that the PS/2 mouse is not detected after the recent ACPI update.
2001-09-06 12:09:26 +00:00
Yet another turn of workaround for psm/ACPI/PnP BIOS problems currently experienced in -CURRENT. This should fix the problem that the PS/2 mouse is detected twice if the acpi module is not loaded on some systems.
2001-09-25 16:59:28 +00:00
/* move our resource to the found device */
irq = bus_get_resource_start(me, SYS_RES_IRQ, 0);
- When moving the IRQ resource from the psmcpnp device to the psm device, delete the IRQ resource from the psmcpnp device completely. - Don't allocate the IRQ resource shared. It is not a shareable interrupt on ISA. The bus driver can set RF_SHAREABLE if the IRQ is actually shareable on a non-ISA bus.
2010-12-16 17:08:43 +00:00
bus_delete_resource(me, SYS_RES_IRQ, 0);
Update the atkbdc, atkbd, and psm drivers to probe/attach more cleanly and consistently in all APCI, PnP BIOS, and "hint" cases. NOTE: this doesn't necessarily solve the problem that the PS/2 mouse is not detected after the recent ACPI update.
2001-09-06 12:09:26 +00:00
bus_set_resource(psm, SYS_RES_IRQ, KBDC_RID_AUX, irq, 1);
/* ...then probe and attach it */
Clean up and fix style(9) nits.
2008-04-08 19:09:45 +00:00
return (device_probe_and_attach(psm));
Update the atkbdc, atkbd, and psm drivers to probe/attach more cleanly and consistently in all APCI, PnP BIOS, and "hint" cases. NOTE: this doesn't necessarily solve the problem that the PS/2 mouse is not detected after the recent ACPI update.
2001-09-06 12:09:26 +00:00
}
static int
psmcpnp_probe(device_t dev)
{
Yet another turn of workaround for psm/ACPI/PnP BIOS problems currently experienced in -CURRENT. This should fix the problem that the PS/2 mouse is detected twice if the acpi module is not loaded on some systems.
2001-09-25 16:59:28 +00:00
struct resource *res;
u_long irq;
int rid;
Update the atkbdc, atkbd, and psm drivers to probe/attach more cleanly and consistently in all APCI, PnP BIOS, and "hint" cases. NOTE: this doesn't necessarily solve the problem that the PS/2 mouse is not detected after the recent ACPI update.
2001-09-06 12:09:26 +00:00
if (ISA_PNP_PROBE(device_get_parent(dev), dev, psmcpnp_ids))
Clean up and fix style(9) nits.
2008-04-08 19:09:45 +00:00
return (ENXIO);
Update the atkbdc, atkbd, and psm drivers to probe/attach more cleanly and consistently in all APCI, PnP BIOS, and "hint" cases. NOTE: this doesn't necessarily solve the problem that the PS/2 mouse is not detected after the recent ACPI update.
2001-09-06 12:09:26 +00:00
Yet another turn of workaround for psm/ACPI/PnP BIOS problems currently experienced in -CURRENT. This should fix the problem that the PS/2 mouse is detected twice if the acpi module is not loaded on some systems.
2001-09-25 16:59:28 +00:00
/*
* The PnP BIOS and ACPI are supposed to assign an IRQ (12)
* to the PS/2 mouse device node. But, some buggy PnP BIOS
* declares the PS/2 mouse device node without an IRQ resource!
* If this happens, we shall refer to device hints.
* If we still don't find it there, use a hardcoded value... XXX
*/
rid = 0;
irq = bus_get_resource_start(dev, SYS_RES_IRQ, rid);
if (irq <= 0) {
if (resource_long_value(PSM_DRIVER_NAME,
Clean up and fix style(9) nits.
2008-04-08 19:09:45 +00:00
device_get_unit(dev),"irq", &irq) != 0)
Yet another turn of workaround for psm/ACPI/PnP BIOS problems currently experienced in -CURRENT. This should fix the problem that the PS/2 mouse is detected twice if the acpi module is not loaded on some systems.
2001-09-25 16:59:28 +00:00
irq = 12; /* XXX */
device_printf(dev, "irq resource info is missing; "
Clean up and fix style(9) nits.
2008-04-08 19:09:45 +00:00
"assuming irq %ld\n", irq);
Yet another turn of workaround for psm/ACPI/PnP BIOS problems currently experienced in -CURRENT. This should fix the problem that the PS/2 mouse is detected twice if the acpi module is not loaded on some systems.
2001-09-25 16:59:28 +00:00
bus_set_resource(dev, SYS_RES_IRQ, rid, irq, 1);
}
- When moving the IRQ resource from the psmcpnp device to the psm device, delete the IRQ resource from the psmcpnp device completely. - Don't allocate the IRQ resource shared. It is not a shareable interrupt on ISA. The bus driver can set RF_SHAREABLE if the IRQ is actually shareable on a non-ISA bus.
2010-12-16 17:08:43 +00:00
res = bus_alloc_resource_any(dev, SYS_RES_IRQ, &rid, 0);
Yet another turn of workaround for psm/ACPI/PnP BIOS problems currently experienced in -CURRENT. This should fix the problem that the PS/2 mouse is detected twice if the acpi module is not loaded on some systems.
2001-09-25 16:59:28 +00:00
bus_release_resource(dev, SYS_RES_IRQ, rid, res);
Update the atkbdc, atkbd, and psm drivers to probe/attach more cleanly and consistently in all APCI, PnP BIOS, and "hint" cases. NOTE: this doesn't necessarily solve the problem that the PS/2 mouse is not detected after the recent ACPI update.
2001-09-06 12:09:26 +00:00
/* keep quiet */
if (!bootverbose)
device_quiet(dev);
Refine ACPI/PnP BIOS probe/attach routines a bit. - Add workaround for the problematic PnP BIOS which does not assign irq resource for the PS/2 mouse device node; if there is no irq assigned for the PS/2 mouse node, refer to device.hints for an irq number. If we still don't find an irq number in the hints database, use a hard-coded value. - Delete unused ivars. - Bit of clean up in probe/attach. - Add PnP ID for the PS/2 mouse port on some IBM ThinkPad models.
2001-09-15 04:38:20 +00:00
Yet another turn of workaround for psm/ACPI/PnP BIOS problems currently experienced in -CURRENT. This should fix the problem that the PS/2 mouse is detected twice if the acpi module is not loaded on some systems.
2001-09-25 16:59:28 +00:00
return ((res == NULL) ? ENXIO : 0);
Update the atkbdc, atkbd, and psm drivers to probe/attach more cleanly and consistently in all APCI, PnP BIOS, and "hint" cases. NOTE: this doesn't necessarily solve the problem that the PS/2 mouse is not detected after the recent ACPI update.
2001-09-06 12:09:26 +00:00
}
static int
psmcpnp_attach(device_t dev)
{
Refine ACPI/PnP BIOS probe/attach routines a bit. - Add workaround for the problematic PnP BIOS which does not assign irq resource for the PS/2 mouse device node; if there is no irq assigned for the PS/2 mouse node, refer to device.hints for an irq number. If we still don't find an irq number in the hints database, use a hard-coded value. - Delete unused ivars. - Bit of clean up in probe/attach. - Add PnP ID for the PS/2 mouse port on some IBM ThinkPad models.
2001-09-15 04:38:20 +00:00
device_t atkbdc;
Yet another turn of workaround for psm/ACPI/PnP BIOS problems currently experienced in -CURRENT. This should fix the problem that the PS/2 mouse is detected twice if the acpi module is not loaded on some systems.
2001-09-25 16:59:28 +00:00
/* find the keyboard controller, which may be on acpi* or isa* bus */
atkbdc = devclass_get_device(devclass_find(ATKBDC_DRIVER_NAME),
Clean up and fix style(9) nits.
2008-04-08 19:09:45 +00:00
device_get_unit(dev));
if ((atkbdc != NULL) && (device_get_state(atkbdc) == DS_ATTACHED))
Refine ACPI/PnP BIOS probe/attach routines a bit. - Add workaround for the problematic PnP BIOS which does not assign irq resource for the PS/2 mouse device node; if there is no irq assigned for the PS/2 mouse node, refer to device.hints for an irq number. If we still don't find an irq number in the hints database, use a hard-coded value. - Delete unused ivars. - Bit of clean up in probe/attach. - Add PnP ID for the PS/2 mouse port on some IBM ThinkPad models.
2001-09-15 04:38:20 +00:00
create_a_copy(atkbdc, dev);
Update the atkbdc, atkbd, and psm drivers to probe/attach more cleanly and consistently in all APCI, PnP BIOS, and "hint" cases. NOTE: this doesn't necessarily solve the problem that the PS/2 mouse is not detected after the recent ACPI update.
2001-09-06 12:09:26 +00:00
Clean up and fix style(9) nits.
2008-04-08 19:09:45 +00:00
return (0);
Update the atkbdc, atkbd, and psm drivers to probe/attach more cleanly and consistently in all APCI, PnP BIOS, and "hint" cases. NOTE: this doesn't necessarily solve the problem that the PS/2 mouse is not detected after the recent ACPI update.
2001-09-06 12:09:26 +00:00
}
DRIVER_MODULE(psmcpnp, isa, psmcpnp_driver, psmcpnp_devclass, 0, 0);
DRIVER_MODULE(psmcpnp, acpi, psmcpnp_driver, psmcpnp_devclass, 0, 0);
- Hook up the new locations of the atkbdc(4), atkbd(4) and psm(4) source files after they were repo-copied to sys/dev/atkbdc. The sources of atkbdc(4) and its children were moved to the new location in preparation for adding an EBus front-end to atkbdc(4) for use on sparc64; i.e. in order to not further scatter them over the whole tree which would have been the result of adding atkbdc_ebus.c in e.g. sys/sparc64/ebus. Another reason for the repo-copies was that some of the sources were misfiled, e.g. sys/isa/atkbd_isa.c wasn't ISA-specific at all but for hanging atkbd(4) off of atkbdc(4) and was renamed to atkbd_atkbdc.c accordingly. Most of sys/isa/psm.c, i.e. expect for its PSMC PNP part, also isn't ISA-specific. - Separate the parts of atkbdc_isa.c which aren't actually ISA-specific but are shareable between different atkbdc(4) bus front-ends into atkbdc_subr.c (repo-copied from atkbdc_isa.c). While here use bus_generic_rl_alloc_resource() and bus_generic_rl_release_resource() respectively in atkbdc_isa.c instead of rolling own versions. - Add sparc64 MD bits to atkbdc(4) and atkbd(4) and an EBus front-end for atkbdc(4). PS/2 controllers and input devices are used on a couple of Sun OEM boards and occur on either the EBus or the ISA bus. Depending on the board it's either the only on-board mean to connect a keyboard and mouse or an alternative to either RS232 or USB devices. - Wrap the PSMC PNP part of psm.c in #ifdef DEV_ISA so it can be compiled without isa(4) (e.g. for EBus-only machines). This ISA-specific part isn't separated into its own source file, yet, as it requires more work than was feasible for 6.0 in order to do it in a clean way. Actually philip@ is working on a rewrite of psm(4) so a more comprehensive clean-up and separation of hardware dependent and independent parts is expected to happen after 6.0. Tested on: i386, sparc64 (AX1105, AXe and AXi boards) Reviewed by: philip
2005-06-10 20:56:38 +00:00
#endif /* DEV_ISA */
Reference in New Issue Copy Permalink