freebsd-dev/sys/dev/atkbdc/psm.c

5001 lines
140 KiB
C
Raw Normal View History

/*-
* Copyright (c) 1992, 1993 Erik Forsberg.
* Copyright (c) 1996, 1997 Kazutaka YOKOTA.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
*
* THIS SOFTWARE IS PROVIDED BY ``AS IS'' AND ANY EXPRESS OR IMPLIED
* WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
* NO EVENT SHALL I BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
* EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
* PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
* PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
* LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
* NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
/*
* Ported to 386bsd Oct 17, 1992
* Sandi Donno, Computer Science, University of Cape Town, South Africa
* Please send bug reports to sandi@cs.uct.ac.za
*
* Thanks are also due to Rick Macklem, rick@snowhite.cis.uoguelph.ca -
* although I was only partially successful in getting the alpha release
* of his "driver for the Logitech and ATI Inport Bus mice for use with
* 386bsd and the X386 port" to work with my Microsoft mouse, I nevertheless
* found his code to be an invaluable reference when porting this driver
* to 386bsd.
*
* Further modifications for latest 386BSD+patchkit and port to NetBSD,
* Andrew Herbert <andrew@werple.apana.org.au> - 8 June 1993
*
* Cloned from the Microsoft Bus Mouse driver, also by Erik Forsberg, by
* Andrew Herbert - 12 June 1993
*
* Modified for PS/2 mouse by Charles Hannum <mycroft@ai.mit.edu>
* - 13 June 1993
*
* Modified for PS/2 AUX mouse by Shoji Yuen <yuen@nuie.nagoya-u.ac.jp>
* - 24 October 1993
*
* Hardware access routines and probe logic rewritten by
* Kazutaka Yokota <yokota@zodiac.mech.utsunomiya-u.ac.jp>
* - 3, 14, 22 October 1996.
* - 12 November 1996. IOCTLs and rearranging `psmread', `psmioctl'...
* - 14, 30 November 1996. Uses `kbdio.c'.
* - 13 December 1996. Uses queuing version of `kbdio.c'.
2008-04-08 19:09:45 +00:00
* - January/February 1997. Tweaked probe logic for
* HiNote UltraII/Latitude/Armada laptops.
* - 30 July 1997. Added APM support.
2008-04-08 19:09:45 +00:00
* - 5 March 1997. Defined driver configuration flags (PSM_CONFIG_XXX).
* Improved sync check logic.
* Vendor specific support routines.
*/
2003-06-11 00:34:37 +00:00
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
- Hook up the new locations of the atkbdc(4), atkbd(4) and psm(4) source files after they were repo-copied to sys/dev/atkbdc. The sources of atkbdc(4) and its children were moved to the new location in preparation for adding an EBus front-end to atkbdc(4) for use on sparc64; i.e. in order to not further scatter them over the whole tree which would have been the result of adding atkbdc_ebus.c in e.g. sys/sparc64/ebus. Another reason for the repo-copies was that some of the sources were misfiled, e.g. sys/isa/atkbd_isa.c wasn't ISA-specific at all but for hanging atkbd(4) off of atkbdc(4) and was renamed to atkbd_atkbdc.c accordingly. Most of sys/isa/psm.c, i.e. expect for its PSMC PNP part, also isn't ISA-specific. - Separate the parts of atkbdc_isa.c which aren't actually ISA-specific but are shareable between different atkbdc(4) bus front-ends into atkbdc_subr.c (repo-copied from atkbdc_isa.c). While here use bus_generic_rl_alloc_resource() and bus_generic_rl_release_resource() respectively in atkbdc_isa.c instead of rolling own versions. - Add sparc64 MD bits to atkbdc(4) and atkbd(4) and an EBus front-end for atkbdc(4). PS/2 controllers and input devices are used on a couple of Sun OEM boards and occur on either the EBus or the ISA bus. Depending on the board it's either the only on-board mean to connect a keyboard and mouse or an alternative to either RS232 or USB devices. - Wrap the PSMC PNP part of psm.c in #ifdef DEV_ISA so it can be compiled without isa(4) (e.g. for EBus-only machines). This ISA-specific part isn't separated into its own source file, yet, as it requires more work than was feasible for 6.0 in order to do it in a clean way. Actually philip@ is working on a rewrite of psm(4) so a more comprehensive clean-up and separation of hardware dependent and independent parts is expected to happen after 6.0. Tested on: i386, sparc64 (AX1105, AXe and AXi boards) Reviewed by: philip
2005-06-10 20:56:38 +00:00
#include "opt_isa.h"
#include "opt_psm.h"
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/kernel.h>
#include <sys/module.h>
#include <sys/bus.h>
#include <sys/conf.h>
#include <sys/filio.h>
#include <sys/poll.h>
#include <sys/sigio.h>
#include <sys/signalvar.h>
#include <sys/syslog.h>
#include <machine/bus.h>
#include <sys/rman.h>
#include <sys/selinfo.h>
Significantly reduce the "jitter" that is typical for PS/2 mice when using a KVM. There is no actual solution possible, but this gets us pretty close. Typically when switching back to a FreeBSD box and moving the mouse wild data is produced, because the protocol's validation/checksum system is extremely weak it is impossible to determine that we're out of sync before dropping several bogus packets to user land. The actual solution that appears to offer the best clamping of jitter is to buffer the mouse packets if we've not seen mouse activity for more than .5 seconds. Then waiting to flush that data for 1/20th of a second. If within that 20th of a second we get any packets that do fail the weak test we drop the entire queue and back off accepting data from the mouse for 2 seconds and then repeat the whole deal. You can still get _some_ jitter, notably if you switch to the FreeBSD box, then move the mouse just enough to generate one or two packets. Those packets may be bogus, but may still pass the validity check. One way to finally kill the problem once and for all is to check the initial packets for "wild" values. Typically one sees packets in the +/-60 range during normal operation, however when bogus data is generated it's typically near the outer range of +/-120 or more, those packets would be a good candidate for dropping or clamping. I've been running with this for several weeks now and it has significantly helped me stay sane even with a piece of junk Belkin KVM causing wild jitter each and every time I switch. Lastly I'd like to note that my experience with Windows shows me that somehow the Microsoft PS/2 driver typically avoids this problem, but that may only be possible when running the mouse in a dumb-ed down PS/2 mode that Belkin recommends on their site.
2003-12-11 11:28:11 +00:00
#include <sys/sysctl.h>
#include <sys/time.h>
#include <sys/uio.h>
#include <sys/limits.h>
#include <sys/mouse.h>
#include <machine/resource.h>
- Hook up the new locations of the atkbdc(4), atkbd(4) and psm(4) source files after they were repo-copied to sys/dev/atkbdc. The sources of atkbdc(4) and its children were moved to the new location in preparation for adding an EBus front-end to atkbdc(4) for use on sparc64; i.e. in order to not further scatter them over the whole tree which would have been the result of adding atkbdc_ebus.c in e.g. sys/sparc64/ebus. Another reason for the repo-copies was that some of the sources were misfiled, e.g. sys/isa/atkbd_isa.c wasn't ISA-specific at all but for hanging atkbd(4) off of atkbdc(4) and was renamed to atkbd_atkbdc.c accordingly. Most of sys/isa/psm.c, i.e. expect for its PSMC PNP part, also isn't ISA-specific. - Separate the parts of atkbdc_isa.c which aren't actually ISA-specific but are shareable between different atkbdc(4) bus front-ends into atkbdc_subr.c (repo-copied from atkbdc_isa.c). While here use bus_generic_rl_alloc_resource() and bus_generic_rl_release_resource() respectively in atkbdc_isa.c instead of rolling own versions. - Add sparc64 MD bits to atkbdc(4) and atkbd(4) and an EBus front-end for atkbdc(4). PS/2 controllers and input devices are used on a couple of Sun OEM boards and occur on either the EBus or the ISA bus. Depending on the board it's either the only on-board mean to connect a keyboard and mouse or an alternative to either RS232 or USB devices. - Wrap the PSMC PNP part of psm.c in #ifdef DEV_ISA so it can be compiled without isa(4) (e.g. for EBus-only machines). This ISA-specific part isn't separated into its own source file, yet, as it requires more work than was feasible for 6.0 in order to do it in a clean way. Actually philip@ is working on a rewrite of psm(4) so a more comprehensive clean-up and separation of hardware dependent and independent parts is expected to happen after 6.0. Tested on: i386, sparc64 (AX1105, AXe and AXi boards) Reviewed by: philip
2005-06-10 20:56:38 +00:00
#ifdef DEV_ISA
#include <isa/isavar.h>
- Hook up the new locations of the atkbdc(4), atkbd(4) and psm(4) source files after they were repo-copied to sys/dev/atkbdc. The sources of atkbdc(4) and its children were moved to the new location in preparation for adding an EBus front-end to atkbdc(4) for use on sparc64; i.e. in order to not further scatter them over the whole tree which would have been the result of adding atkbdc_ebus.c in e.g. sys/sparc64/ebus. Another reason for the repo-copies was that some of the sources were misfiled, e.g. sys/isa/atkbd_isa.c wasn't ISA-specific at all but for hanging atkbd(4) off of atkbdc(4) and was renamed to atkbd_atkbdc.c accordingly. Most of sys/isa/psm.c, i.e. expect for its PSMC PNP part, also isn't ISA-specific. - Separate the parts of atkbdc_isa.c which aren't actually ISA-specific but are shareable between different atkbdc(4) bus front-ends into atkbdc_subr.c (repo-copied from atkbdc_isa.c). While here use bus_generic_rl_alloc_resource() and bus_generic_rl_release_resource() respectively in atkbdc_isa.c instead of rolling own versions. - Add sparc64 MD bits to atkbdc(4) and atkbd(4) and an EBus front-end for atkbdc(4). PS/2 controllers and input devices are used on a couple of Sun OEM boards and occur on either the EBus or the ISA bus. Depending on the board it's either the only on-board mean to connect a keyboard and mouse or an alternative to either RS232 or USB devices. - Wrap the PSMC PNP part of psm.c in #ifdef DEV_ISA so it can be compiled without isa(4) (e.g. for EBus-only machines). This ISA-specific part isn't separated into its own source file, yet, as it requires more work than was feasible for 6.0 in order to do it in a clean way. Actually philip@ is working on a rewrite of psm(4) so a more comprehensive clean-up and separation of hardware dependent and independent parts is expected to happen after 6.0. Tested on: i386, sparc64 (AX1105, AXe and AXi boards) Reviewed by: philip
2005-06-10 20:56:38 +00:00
#endif
#include <dev/atkbdc/atkbdcreg.h>
#include <dev/atkbdc/psm.h>
/*
* Driver specific options: the following options may be set by
* `options' statements in the kernel configuration file.
*/
/* debugging */
#ifndef PSM_DEBUG
2008-04-08 19:09:45 +00:00
#define PSM_DEBUG 0 /*
* logging: 0: none, 1: brief, 2: verbose
* 3: sync errors, 4: all packets
*/
#endif
2008-04-08 19:09:45 +00:00
#define VLOG(level, args) do { \
if (verbose >= level) \
log args; \
} while (0)
#ifndef PSM_INPUT_TIMEOUT
2008-04-08 19:09:45 +00:00
#define PSM_INPUT_TIMEOUT 2000000 /* 2 sec */
#endif
#ifndef PSM_TAP_TIMEOUT
2008-04-08 19:09:45 +00:00
#define PSM_TAP_TIMEOUT 125000
#endif
#ifndef PSM_TAP_THRESHOLD
2008-04-08 19:09:45 +00:00
#define PSM_TAP_THRESHOLD 25
#endif
/* end of driver specific options */
2008-04-08 19:09:45 +00:00
#define PSMCPNP_DRIVER_NAME "psmcpnp"
/* input queue */
2008-04-08 19:09:45 +00:00
#define PSM_BUFSIZE 960
#define PSM_SMALLBUFSIZE 240
/* operation levels */
2008-04-08 19:09:45 +00:00
#define PSM_LEVEL_BASE 0
#define PSM_LEVEL_STANDARD 1
#define PSM_LEVEL_NATIVE 2
#define PSM_LEVEL_MIN PSM_LEVEL_BASE
#define PSM_LEVEL_MAX PSM_LEVEL_NATIVE
/* Logitech PS2++ protocol */
2008-04-08 19:09:45 +00:00
#define MOUSE_PS2PLUS_CHECKBITS(b) \
((((b[2] & 0x03) << 2) | 0x02) == (b[1] & 0x0f))
#define MOUSE_PS2PLUS_PACKET_TYPE(b) \
(((b[0] & 0x30) >> 2) | ((b[1] & 0x30) >> 4))
/* ring buffer */
typedef struct ringbuf {
2008-04-08 19:09:45 +00:00
int count; /* # of valid elements in the buffer */
int head; /* head pointer */
int tail; /* tail poiner */
u_char buf[PSM_BUFSIZE];
} ringbuf_t;
Significantly reduce the "jitter" that is typical for PS/2 mice when using a KVM. There is no actual solution possible, but this gets us pretty close. Typically when switching back to a FreeBSD box and moving the mouse wild data is produced, because the protocol's validation/checksum system is extremely weak it is impossible to determine that we're out of sync before dropping several bogus packets to user land. The actual solution that appears to offer the best clamping of jitter is to buffer the mouse packets if we've not seen mouse activity for more than .5 seconds. Then waiting to flush that data for 1/20th of a second. If within that 20th of a second we get any packets that do fail the weak test we drop the entire queue and back off accepting data from the mouse for 2 seconds and then repeat the whole deal. You can still get _some_ jitter, notably if you switch to the FreeBSD box, then move the mouse just enough to generate one or two packets. Those packets may be bogus, but may still pass the validity check. One way to finally kill the problem once and for all is to check the initial packets for "wild" values. Typically one sees packets in the +/-60 range during normal operation, however when bogus data is generated it's typically near the outer range of +/-120 or more, those packets would be a good candidate for dropping or clamping. I've been running with this for several weeks now and it has significantly helped me stay sane even with a piece of junk Belkin KVM causing wild jitter each and every time I switch. Lastly I'd like to note that my experience with Windows shows me that somehow the Microsoft PS/2 driver typically avoids this problem, but that may only be possible when running the mouse in a dumb-ed down PS/2 mode that Belkin recommends on their site.
2003-12-11 11:28:11 +00:00
/* data buffer */
typedef struct packetbuf {
2008-04-08 19:09:45 +00:00
u_char ipacket[16]; /* interim input buffer */
int inputbytes; /* # of bytes in the input buffer */
Significantly reduce the "jitter" that is typical for PS/2 mice when using a KVM. There is no actual solution possible, but this gets us pretty close. Typically when switching back to a FreeBSD box and moving the mouse wild data is produced, because the protocol's validation/checksum system is extremely weak it is impossible to determine that we're out of sync before dropping several bogus packets to user land. The actual solution that appears to offer the best clamping of jitter is to buffer the mouse packets if we've not seen mouse activity for more than .5 seconds. Then waiting to flush that data for 1/20th of a second. If within that 20th of a second we get any packets that do fail the weak test we drop the entire queue and back off accepting data from the mouse for 2 seconds and then repeat the whole deal. You can still get _some_ jitter, notably if you switch to the FreeBSD box, then move the mouse just enough to generate one or two packets. Those packets may be bogus, but may still pass the validity check. One way to finally kill the problem once and for all is to check the initial packets for "wild" values. Typically one sees packets in the +/-60 range during normal operation, however when bogus data is generated it's typically near the outer range of +/-120 or more, those packets would be a good candidate for dropping or clamping. I've been running with this for several weeks now and it has significantly helped me stay sane even with a piece of junk Belkin KVM causing wild jitter each and every time I switch. Lastly I'd like to note that my experience with Windows shows me that somehow the Microsoft PS/2 driver typically avoids this problem, but that may only be possible when running the mouse in a dumb-ed down PS/2 mode that Belkin recommends on their site.
2003-12-11 11:28:11 +00:00
} packetbuf_t;
#ifndef PSM_PACKETQUEUE
2008-04-08 19:09:45 +00:00
#define PSM_PACKETQUEUE 128
Significantly reduce the "jitter" that is typical for PS/2 mice when using a KVM. There is no actual solution possible, but this gets us pretty close. Typically when switching back to a FreeBSD box and moving the mouse wild data is produced, because the protocol's validation/checksum system is extremely weak it is impossible to determine that we're out of sync before dropping several bogus packets to user land. The actual solution that appears to offer the best clamping of jitter is to buffer the mouse packets if we've not seen mouse activity for more than .5 seconds. Then waiting to flush that data for 1/20th of a second. If within that 20th of a second we get any packets that do fail the weak test we drop the entire queue and back off accepting data from the mouse for 2 seconds and then repeat the whole deal. You can still get _some_ jitter, notably if you switch to the FreeBSD box, then move the mouse just enough to generate one or two packets. Those packets may be bogus, but may still pass the validity check. One way to finally kill the problem once and for all is to check the initial packets for "wild" values. Typically one sees packets in the +/-60 range during normal operation, however when bogus data is generated it's typically near the outer range of +/-120 or more, those packets would be a good candidate for dropping or clamping. I've been running with this for several weeks now and it has significantly helped me stay sane even with a piece of junk Belkin KVM causing wild jitter each and every time I switch. Lastly I'd like to note that my experience with Windows shows me that somehow the Microsoft PS/2 driver typically avoids this problem, but that may only be possible when running the mouse in a dumb-ed down PS/2 mode that Belkin recommends on their site.
2003-12-11 11:28:11 +00:00
#endif
enum {
SYNAPTICS_SYSCTL_MIN_PRESSURE,
SYNAPTICS_SYSCTL_MAX_PRESSURE,
SYNAPTICS_SYSCTL_MAX_WIDTH,
SYNAPTICS_SYSCTL_MARGIN_TOP,
SYNAPTICS_SYSCTL_MARGIN_RIGHT,
SYNAPTICS_SYSCTL_MARGIN_BOTTOM,
SYNAPTICS_SYSCTL_MARGIN_LEFT,
SYNAPTICS_SYSCTL_NA_TOP,
SYNAPTICS_SYSCTL_NA_RIGHT,
SYNAPTICS_SYSCTL_NA_BOTTOM,
SYNAPTICS_SYSCTL_NA_LEFT,
SYNAPTICS_SYSCTL_WINDOW_MIN,
SYNAPTICS_SYSCTL_WINDOW_MAX,
SYNAPTICS_SYSCTL_MULTIPLICATOR,
SYNAPTICS_SYSCTL_WEIGHT_CURRENT,
SYNAPTICS_SYSCTL_WEIGHT_PREVIOUS,
SYNAPTICS_SYSCTL_WEIGHT_PREVIOUS_NA,
SYNAPTICS_SYSCTL_WEIGHT_LEN_SQUARED,
SYNAPTICS_SYSCTL_DIV_MIN,
SYNAPTICS_SYSCTL_DIV_MAX,
SYNAPTICS_SYSCTL_DIV_MAX_NA,
SYNAPTICS_SYSCTL_DIV_LEN,
SYNAPTICS_SYSCTL_TAP_MAX_DELTA,
SYNAPTICS_SYSCTL_TAP_MIN_QUEUE,
SYNAPTICS_SYSCTL_TAPHOLD_TIMEOUT,
SYNAPTICS_SYSCTL_VSCROLL_HOR_AREA,
SYNAPTICS_SYSCTL_VSCROLL_VER_AREA,
SYNAPTICS_SYSCTL_VSCROLL_MIN_DELTA,
SYNAPTICS_SYSCTL_VSCROLL_DIV_MIN,
SYNAPTICS_SYSCTL_VSCROLL_DIV_MAX
};
typedef struct synapticsinfo {
struct sysctl_ctx_list sysctl_ctx;
2008-04-08 19:09:45 +00:00
struct sysctl_oid *sysctl_tree;
int directional_scrolls;
int min_pressure;
int max_pressure;
int max_width;
int margin_top;
int margin_right;
int margin_bottom;
int margin_left;
int na_top;
int na_right;
int na_bottom;
int na_left;
int window_min;
int window_max;
int multiplicator;
int weight_current;
int weight_previous;
int weight_previous_na;
int weight_len_squared;
int div_min;
int div_max;
int div_max_na;
int div_len;
int tap_max_delta;
int tap_min_queue;
int taphold_timeout;
int vscroll_ver_area;
int vscroll_hor_area;
int vscroll_min_delta;
int vscroll_div_min;
int vscroll_div_max;
} synapticsinfo_t;
typedef struct synapticspacket {
int x;
int y;
} synapticspacket_t;
#define SYNAPTICS_PACKETQUEUE 10
#define SYNAPTICS_QUEUE_CURSOR(x) \
(x + SYNAPTICS_PACKETQUEUE) % SYNAPTICS_PACKETQUEUE
#define SYNAPTICS_VERSION_GE(synhw, major, minor) \
((synhw).infoMajor > (major) || \
((synhw).infoMajor == (major) && (synhw).infoMinor >= (minor)))
typedef struct synapticsaction {
synapticspacket_t queue[SYNAPTICS_PACKETQUEUE];
int queue_len;
int queue_cursor;
int window_min;
int start_x;
int start_y;
int avg_dx;
int avg_dy;
int squelch_x;
int squelch_y;
int fingers_nb;
int tap_button;
int in_taphold;
int in_vscroll;
} synapticsaction_t;
enum {
TRACKPOINT_SYSCTL_SENSITIVITY,
TRACKPOINT_SYSCTL_NEGATIVE_INERTIA,
TRACKPOINT_SYSCTL_UPPER_PLATEAU,
TRACKPOINT_SYSCTL_BACKUP_RANGE,
TRACKPOINT_SYSCTL_DRAG_HYSTERESIS,
TRACKPOINT_SYSCTL_MINIMUM_DRAG,
TRACKPOINT_SYSCTL_UP_THRESHOLD,
TRACKPOINT_SYSCTL_THRESHOLD,
TRACKPOINT_SYSCTL_JENKS_CURVATURE,
TRACKPOINT_SYSCTL_Z_TIME,
TRACKPOINT_SYSCTL_PRESS_TO_SELECT,
TRACKPOINT_SYSCTL_SKIP_BACKUPS
};
typedef struct trackpointinfo {
struct sysctl_ctx_list sysctl_ctx;
struct sysctl_oid *sysctl_tree;
int sensitivity;
int inertia;
int uplateau;
int reach;
int draghys;
int mindrag;
int upthresh;
int threshold;
int jenks;
int ztime;
int pts;
int skipback;
} trackpointinfo_t;
/* driver control block */
struct psm_softc { /* Driver status information */
2008-04-08 19:09:45 +00:00
int unit;
struct selinfo rsel; /* Process selecting for Input */
u_char state; /* Mouse driver state */
int config; /* driver configuration flags */
int flags; /* other flags */
KBDC kbdc; /* handle to access kbd controller */
struct resource *intr; /* IRQ resource */
void *ih; /* interrupt handle */
mousehw_t hw; /* hardware information */
synapticshw_t synhw; /* Synaptics hardware information */
synapticsinfo_t syninfo; /* Synaptics configuration */
synapticsaction_t synaction; /* Synaptics action context */
int tphw; /* TrackPoint hardware information */
trackpointinfo_t tpinfo; /* TrackPoint configuration */
2008-04-08 19:09:45 +00:00
mousemode_t mode; /* operation mode */
mousemode_t dflt_mode; /* default operation mode */
mousestatus_t status; /* accumulated mouse movement */
ringbuf_t queue; /* mouse status queue */
packetbuf_t pqueue[PSM_PACKETQUEUE]; /* mouse data queue */
int pqueue_start; /* start of data in queue */
int pqueue_end; /* end of data in queue */
int button; /* the latest button state */
int xold; /* previous absolute X position */
int yold; /* previous absolute Y position */
int xaverage; /* average X position */
int yaverage; /* average Y position */
int squelch; /* level to filter movement at low speed */
int zmax; /* maximum pressure value for touchpads */
int syncerrors; /* # of bytes discarded to synchronize */
int pkterrors; /* # of packets failed during quaranteen. */
struct timeval inputtimeout;
struct timeval lastsoftintr; /* time of last soft interrupt */
struct timeval lastinputerr; /* time last sync error happened */
struct timeval taptimeout; /* tap timeout for touchpads */
int watchdog; /* watchdog timer flag */
struct callout callout; /* watchdog timer call out */
struct callout softcallout; /* buffer timer call out */
2008-04-08 19:09:45 +00:00
struct cdev *dev;
struct cdev *bdev;
int lasterr;
int cmdcount;
struct sigio *async; /* Processes waiting for SIGIO */
};
static devclass_t psm_devclass;
/* driver state flags (state) */
2008-04-08 19:09:45 +00:00
#define PSM_VALID 0x80
#define PSM_OPEN 1 /* Device is open */
#define PSM_ASLP 2 /* Waiting for mouse data */
#define PSM_SOFTARMED 4 /* Software interrupt armed */
#define PSM_NEED_SYNCBITS 8 /* Set syncbits using next data pkt */
/* driver configuration flags (config) */
2008-04-08 19:09:45 +00:00
#define PSM_CONFIG_RESOLUTION 0x000f /* resolution */
#define PSM_CONFIG_ACCEL 0x00f0 /* acceleration factor */
#define PSM_CONFIG_NOCHECKSYNC 0x0100 /* disable sync. test */
#define PSM_CONFIG_NOIDPROBE 0x0200 /* disable mouse model probe */
#define PSM_CONFIG_NORESET 0x0400 /* don't reset the mouse */
#define PSM_CONFIG_FORCETAP 0x0800 /* assume `tap' action exists */
#define PSM_CONFIG_IGNPORTERROR 0x1000 /* ignore error in aux port test */
#define PSM_CONFIG_HOOKRESUME 0x2000 /* hook the system resume event */
#define PSM_CONFIG_INITAFTERSUSPEND 0x4000 /* init the device at the resume event */
#define PSM_CONFIG_FLAGS \
(PSM_CONFIG_RESOLUTION | \
PSM_CONFIG_ACCEL | \
PSM_CONFIG_NOCHECKSYNC | \
PSM_CONFIG_NOIDPROBE | \
PSM_CONFIG_NORESET | \
PSM_CONFIG_FORCETAP | \
PSM_CONFIG_IGNPORTERROR | \
PSM_CONFIG_HOOKRESUME | \
PSM_CONFIG_INITAFTERSUSPEND)
/* other flags (flags) */
2008-04-08 19:09:45 +00:00
#define PSM_FLAGS_FINGERDOWN 0x0001 /* VersaPad finger down */
/* Tunables */
static int tap_enabled = -1;
TUNABLE_INT("hw.psm.tap_enabled", &tap_enabled);
static int synaptics_support = 0;
TUNABLE_INT("hw.psm.synaptics_support", &synaptics_support);
static int trackpoint_support = 0;
TUNABLE_INT("hw.psm.trackpoint_support", &trackpoint_support);
static int verbose = PSM_DEBUG;
TUNABLE_INT("debug.psm.loglevel", &verbose);
/* for backward compatibility */
2008-04-08 19:09:45 +00:00
#define OLD_MOUSE_GETHWINFO _IOR('M', 1, old_mousehw_t)
#define OLD_MOUSE_GETMODE _IOR('M', 2, old_mousemode_t)
#define OLD_MOUSE_SETMODE _IOW('M', 3, old_mousemode_t)
typedef struct old_mousehw {
2008-04-08 19:09:45 +00:00
int buttons;
int iftype;
int type;
int hwid;
} old_mousehw_t;
typedef struct old_mousemode {
2008-04-08 19:09:45 +00:00
int protocol;
int rate;
int resolution;
int accelfactor;
} old_mousemode_t;
/* packet formatting function */
2008-04-08 19:09:45 +00:00
typedef int packetfunc_t(struct psm_softc *, u_char *, int *, int,
mousestatus_t *);
/* function prototypes */
2008-04-08 19:09:45 +00:00
static void psmidentify(driver_t *, device_t);
static int psmprobe(device_t);
static int psmattach(device_t);
static int psmdetach(device_t);
static int psmresume(device_t);
static d_open_t psmopen;
static d_close_t psmclose;
static d_read_t psmread;
static d_write_t psmwrite;
static d_ioctl_t psmioctl;
static d_poll_t psmpoll;
static int enable_aux_dev(KBDC);
static int disable_aux_dev(KBDC);
static int get_mouse_status(KBDC, int *, int, int);
static int get_aux_id(KBDC);
static int set_mouse_sampling_rate(KBDC, int);
static int set_mouse_scaling(KBDC, int);
static int set_mouse_resolution(KBDC, int);
static int set_mouse_mode(KBDC);
static int get_mouse_buttons(KBDC);
static int is_a_mouse(int);
static void recover_from_error(KBDC);
static int restore_controller(KBDC, int);
static int doinitialize(struct psm_softc *, mousemode_t *);
static int doopen(struct psm_softc *, int);
static int reinitialize(struct psm_softc *, int);
static char *model_name(int);
static void psmsoftintr(void *);
static void psmintr(void *);
static void psmtimeout(void *);
static int timeelapsed(const struct timeval *, int, int,
const struct timeval *);
static void dropqueue(struct psm_softc *);
static void flushpackets(struct psm_softc *);
static void proc_mmanplus(struct psm_softc *, packetbuf_t *,
mousestatus_t *, int *, int *, int *);
static int proc_synaptics(struct psm_softc *, packetbuf_t *,
mousestatus_t *, int *, int *, int *);
static void proc_versapad(struct psm_softc *, packetbuf_t *,
mousestatus_t *, int *, int *, int *);
static int tame_mouse(struct psm_softc *, packetbuf_t *, mousestatus_t *,
u_char *);
/* vendor specific features */
typedef int probefunc_t(KBDC, struct psm_softc *);
2008-04-08 19:09:45 +00:00
static int mouse_id_proc1(KBDC, int, int, int *);
static int mouse_ext_command(KBDC, int);
static probefunc_t enable_groller;
static probefunc_t enable_gmouse;
static probefunc_t enable_aglide;
static probefunc_t enable_kmouse;
static probefunc_t enable_msexplorer;
static probefunc_t enable_msintelli;
static probefunc_t enable_4dmouse;
static probefunc_t enable_4dplus;
static probefunc_t enable_mmanplus;
static probefunc_t enable_synaptics;
static probefunc_t enable_trackpoint;
2008-04-08 19:09:45 +00:00
static probefunc_t enable_versapad;
static struct {
2008-04-08 19:09:45 +00:00
int model;
u_char syncmask;
int packetsize;
probefunc_t *probefunc;
} vendortype[] = {
2008-04-08 19:09:45 +00:00
/*
* WARNING: the order of probe is very important. Don't mess it
* unless you know what you are doing.
*/
{ MOUSE_MODEL_NET, /* Genius NetMouse */
0x08, MOUSE_PS2INTELLI_PACKETSIZE, enable_gmouse },
{ MOUSE_MODEL_NETSCROLL, /* Genius NetScroll */
0xc8, 6, enable_groller },
{ MOUSE_MODEL_MOUSEMANPLUS, /* Logitech MouseMan+ */
0x08, MOUSE_PS2_PACKETSIZE, enable_mmanplus },
{ MOUSE_MODEL_EXPLORER, /* Microsoft IntelliMouse Explorer */
0x08, MOUSE_PS2INTELLI_PACKETSIZE, enable_msexplorer },
{ MOUSE_MODEL_4D, /* A4 Tech 4D Mouse */
0x08, MOUSE_4D_PACKETSIZE, enable_4dmouse },
{ MOUSE_MODEL_4DPLUS, /* A4 Tech 4D+ Mouse */
0xc8, MOUSE_4DPLUS_PACKETSIZE, enable_4dplus },
{ MOUSE_MODEL_SYNAPTICS, /* Synaptics Touchpad */
0xc0, MOUSE_SYNAPTICS_PACKETSIZE, enable_synaptics },
2008-04-08 19:09:45 +00:00
{ MOUSE_MODEL_INTELLI, /* Microsoft IntelliMouse */
0x08, MOUSE_PS2INTELLI_PACKETSIZE, enable_msintelli },
{ MOUSE_MODEL_GLIDEPOINT, /* ALPS GlidePoint */
0xc0, MOUSE_PS2_PACKETSIZE, enable_aglide },
{ MOUSE_MODEL_THINK, /* Kensington ThinkingMouse */
0x80, MOUSE_PS2_PACKETSIZE, enable_kmouse },
{ MOUSE_MODEL_VERSAPAD, /* Interlink electronics VersaPad */
0xe8, MOUSE_PS2VERSA_PACKETSIZE, enable_versapad },
{ MOUSE_MODEL_TRACKPOINT, /* IBM/Lenovo TrackPoint */
0xc0, MOUSE_PS2_PACKETSIZE, enable_trackpoint },
2008-04-08 19:09:45 +00:00
{ MOUSE_MODEL_GENERIC,
0xc0, MOUSE_PS2_PACKETSIZE, NULL },
};
2008-04-08 19:09:45 +00:00
#define GENERIC_MOUSE_ENTRY \
((sizeof(vendortype) / sizeof(*vendortype)) - 1)
/* device driver declarateion */
static device_method_t psm_methods[] = {
/* Device interface */
DEVMETHOD(device_identify, psmidentify),
DEVMETHOD(device_probe, psmprobe),
DEVMETHOD(device_attach, psmattach),
- Add Support for the following PS/2 mice: - Microsoft IntelliMouse Explorer: 2 buttons on top, 2 side buttons and a wheel which also acts as the middle button. The mouse is recognized as "IntelliMouse Explorer". - Genius NetScroll Optical: 2 buttons on top, 2 side buttons and a wheel which also acts as the middle button. The mouse is recognized as "NetMouse/NetScroll Optical". - MouseSystems SmartScroll Mouse (OEM from Genius?): 3 buttons on top, 1 side button and a wheel. The mouse is recognized as Genius "NetScroll". - IBM ScrollPoint: 2 buttons on top and a stick between the buttons. The stick can perform "horizontal scroll" in W*ndows environment. The horizontal movement of the stick is detected. It is currently mapped to the Z axis movement in the same way as the first wheel. The mouse is recognized as "MouseMan+", as it is considered to be a variation of MouseMan. - A4 Tech 4D and 4D+ mice. These mice have two wheels! The movement of the second wheel is reported as the Z axis movement in the same way as the first wheel. These mice are recognized as "4D Mouse" and "4D+ Mouse". - Tweak IntelliMouse support code a bit so that less-than-compatible wheel mice can work properly with the psm driver. - Add driver configuration flags which correspond to the kernel options PSM_HOOKRESUME and PSM_RESETAFTERSUSPEND, so that we don't need to recompile the kernel when we need these functions. - Properly keep track of the irq resource. - Add a watchdog timer in case interrupts are lost (experimental). - Add `detach' function (experimental).
2000-03-18 15:21:40 +00:00
DEVMETHOD(device_detach, psmdetach),
DEVMETHOD(device_resume, psmresume),
{ 0, 0 }
};
static driver_t psm_driver = {
2008-04-08 19:09:45 +00:00
PSM_DRIVER_NAME,
psm_methods,
sizeof(struct psm_softc),
};
static struct cdevsw psm_cdevsw = {
.d_version = D_VERSION,
.d_flags = D_NEEDGIANT,
.d_open = psmopen,
.d_close = psmclose,
.d_read = psmread,
.d_write = psmwrite,
.d_ioctl = psmioctl,
.d_poll = psmpoll,
.d_name = PSM_DRIVER_NAME,
};
/* device I/O routines */
static int
enable_aux_dev(KBDC kbdc)
{
2008-04-08 19:09:45 +00:00
int res;
2008-04-08 19:09:45 +00:00
res = send_aux_command(kbdc, PSMC_ENABLE_DEV);
VLOG(2, (LOG_DEBUG, "psm: ENABLE_DEV return code:%04x\n", res));
2008-04-08 19:09:45 +00:00
return (res == PSM_ACK);
}
static int
disable_aux_dev(KBDC kbdc)
{
2008-04-08 19:09:45 +00:00
int res;
2008-04-08 19:09:45 +00:00
res = send_aux_command(kbdc, PSMC_DISABLE_DEV);
VLOG(2, (LOG_DEBUG, "psm: DISABLE_DEV return code:%04x\n", res));
2008-04-08 19:09:45 +00:00
return (res == PSM_ACK);
}
static int
get_mouse_status(KBDC kbdc, int *status, int flag, int len)
{
2008-04-08 19:09:45 +00:00
int cmd;
int res;
int i;
switch (flag) {
case 0:
default:
cmd = PSMC_SEND_DEV_STATUS;
break;
case 1:
cmd = PSMC_SEND_DEV_DATA;
break;
}
empty_aux_buffer(kbdc, 5);
res = send_aux_command(kbdc, cmd);
VLOG(2, (LOG_DEBUG, "psm: SEND_AUX_DEV_%s return code:%04x\n",
(flag == 1) ? "DATA" : "STATUS", res));
if (res != PSM_ACK)
return (0);
for (i = 0; i < len; ++i) {
status[i] = read_aux_data(kbdc);
if (status[i] < 0)
break;
}
VLOG(1, (LOG_DEBUG, "psm: %s %02x %02x %02x\n",
(flag == 1) ? "data" : "status", status[0], status[1], status[2]));
return (i);
}
static int
get_aux_id(KBDC kbdc)
{
2008-04-08 19:09:45 +00:00
int res;
int id;
2008-04-08 19:09:45 +00:00
empty_aux_buffer(kbdc, 5);
res = send_aux_command(kbdc, PSMC_SEND_DEV_ID);
VLOG(2, (LOG_DEBUG, "psm: SEND_DEV_ID return code:%04x\n", res));
if (res != PSM_ACK)
return (-1);
2008-04-08 19:09:45 +00:00
/* 10ms delay */
DELAY(10000);
2008-04-08 19:09:45 +00:00
id = read_aux_data(kbdc);
VLOG(2, (LOG_DEBUG, "psm: device ID: %04x\n", id));
2008-04-08 19:09:45 +00:00
return (id);
}
static int
set_mouse_sampling_rate(KBDC kbdc, int rate)
{
2008-04-08 19:09:45 +00:00
int res;
2008-04-08 19:09:45 +00:00
res = send_aux_command_and_data(kbdc, PSMC_SET_SAMPLING_RATE, rate);
VLOG(2, (LOG_DEBUG, "psm: SET_SAMPLING_RATE (%d) %04x\n", rate, res));
2008-04-08 19:09:45 +00:00
return ((res == PSM_ACK) ? rate : -1);
}
static int
set_mouse_scaling(KBDC kbdc, int scale)
{
2008-04-08 19:09:45 +00:00
int res;
switch (scale) {
case 1:
default:
scale = PSMC_SET_SCALING11;
break;
case 2:
scale = PSMC_SET_SCALING21;
break;
}
res = send_aux_command(kbdc, scale);
VLOG(2, (LOG_DEBUG, "psm: SET_SCALING%s return code:%04x\n",
(scale == PSMC_SET_SCALING21) ? "21" : "11", res));
return (res == PSM_ACK);
}
/* `val' must be 0 through PSMD_MAX_RESOLUTION */
static int
set_mouse_resolution(KBDC kbdc, int val)
{
2008-04-08 19:09:45 +00:00
int res;
2008-04-08 19:09:45 +00:00
res = send_aux_command_and_data(kbdc, PSMC_SET_RESOLUTION, val);
VLOG(2, (LOG_DEBUG, "psm: SET_RESOLUTION (%d) %04x\n", val, res));
2008-04-08 19:09:45 +00:00
return ((res == PSM_ACK) ? val : -1);
}
/*
* NOTE: once `set_mouse_mode()' is called, the mouse device must be
* re-enabled by calling `enable_aux_dev()'
*/
static int
set_mouse_mode(KBDC kbdc)
{
2008-04-08 19:09:45 +00:00
int res;
2008-04-08 19:09:45 +00:00
res = send_aux_command(kbdc, PSMC_SET_STREAM_MODE);
VLOG(2, (LOG_DEBUG, "psm: SET_STREAM_MODE return code:%04x\n", res));
2008-04-08 19:09:45 +00:00
return (res == PSM_ACK);
}
static int
get_mouse_buttons(KBDC kbdc)
{
2008-04-08 19:09:45 +00:00
int c = 2; /* assume two buttons by default */
int status[3];
/*
* NOTE: a special sequence to obtain Logitech Mouse specific
* information: set resolution to 25 ppi, set scaling to 1:1, set
* scaling to 1:1, set scaling to 1:1. Then the second byte of the
* mouse status bytes is the number of available buttons.
* Some manufactures also support this sequence.
*/
if (set_mouse_resolution(kbdc, PSMD_RES_LOW) != PSMD_RES_LOW)
return (c);
if (set_mouse_scaling(kbdc, 1) && set_mouse_scaling(kbdc, 1) &&
set_mouse_scaling(kbdc, 1) &&
get_mouse_status(kbdc, status, 0, 3) >= 3 && status[1] != 0)
return (status[1]);
return (c);
}
/* misc subroutines */
/*
* Someday, I will get the complete list of valid pointing devices and
* their IDs... XXX
*/
static int
is_a_mouse(int id)
{
#if 0
2008-04-08 19:09:45 +00:00
static int valid_ids[] = {
PSM_MOUSE_ID, /* mouse */
PSM_BALLPOINT_ID, /* ballpoint device */
PSM_INTELLI_ID, /* Intellimouse */
PSM_EXPLORER_ID, /* Intellimouse Explorer */
-1 /* end of table */
};
int i;
for (i = 0; valid_ids[i] >= 0; ++i)
if (valid_ids[i] == id)
return (TRUE);
return (FALSE);
#else
2008-04-08 19:09:45 +00:00
return (TRUE);
#endif
}
static char *
model_name(int model)
{
2008-04-08 19:09:45 +00:00
static struct {
int model_code;
char *model_name;
} models[] = {
{ MOUSE_MODEL_NETSCROLL, "NetScroll" },
{ MOUSE_MODEL_NET, "NetMouse/NetScroll Optical" },
{ MOUSE_MODEL_GLIDEPOINT, "GlidePoint" },
{ MOUSE_MODEL_THINK, "ThinkingMouse" },
{ MOUSE_MODEL_INTELLI, "IntelliMouse" },
{ MOUSE_MODEL_MOUSEMANPLUS, "MouseMan+" },
{ MOUSE_MODEL_VERSAPAD, "VersaPad" },
{ MOUSE_MODEL_EXPLORER, "IntelliMouse Explorer" },
{ MOUSE_MODEL_4D, "4D Mouse" },
{ MOUSE_MODEL_4DPLUS, "4D+ Mouse" },
{ MOUSE_MODEL_SYNAPTICS, "Synaptics Touchpad" },
{ MOUSE_MODEL_TRACKPOINT, "IBM/Lenovo TrackPoint" },
{ MOUSE_MODEL_GENERIC, "Generic PS/2 mouse" },
2008-04-08 19:09:45 +00:00
{ MOUSE_MODEL_UNKNOWN, "Unknown" },
};
int i;
for (i = 0; models[i].model_code != MOUSE_MODEL_UNKNOWN; ++i)
if (models[i].model_code == model)
break;
return (models[i].model_name);
}
static void
recover_from_error(KBDC kbdc)
{
2008-04-08 19:09:45 +00:00
/* discard anything left in the output buffer */
empty_both_buffers(kbdc, 10);
#if 0
2008-04-08 19:09:45 +00:00
/*
* NOTE: KBDC_RESET_KBD may not restore the communication between the
* keyboard and the controller.
*/
reset_kbd(kbdc);
#else
2008-04-08 19:09:45 +00:00
/*
* NOTE: somehow diagnostic and keyboard port test commands bring the
* keyboard back.
*/
if (!test_controller(kbdc))
log(LOG_ERR, "psm: keyboard controller failed.\n");
/* if there isn't a keyboard in the system, the following error is OK */
if (test_kbd_port(kbdc) != 0)
VLOG(1, (LOG_ERR, "psm: keyboard port failed.\n"));
#endif
}
static int
restore_controller(KBDC kbdc, int command_byte)
{
- Add Support for the following PS/2 mice: - Microsoft IntelliMouse Explorer: 2 buttons on top, 2 side buttons and a wheel which also acts as the middle button. The mouse is recognized as "IntelliMouse Explorer". - Genius NetScroll Optical: 2 buttons on top, 2 side buttons and a wheel which also acts as the middle button. The mouse is recognized as "NetMouse/NetScroll Optical". - MouseSystems SmartScroll Mouse (OEM from Genius?): 3 buttons on top, 1 side button and a wheel. The mouse is recognized as Genius "NetScroll". - IBM ScrollPoint: 2 buttons on top and a stick between the buttons. The stick can perform "horizontal scroll" in W*ndows environment. The horizontal movement of the stick is detected. It is currently mapped to the Z axis movement in the same way as the first wheel. The mouse is recognized as "MouseMan+", as it is considered to be a variation of MouseMan. - A4 Tech 4D and 4D+ mice. These mice have two wheels! The movement of the second wheel is reported as the Z axis movement in the same way as the first wheel. These mice are recognized as "4D Mouse" and "4D+ Mouse". - Tweak IntelliMouse support code a bit so that less-than-compatible wheel mice can work properly with the psm driver. - Add driver configuration flags which correspond to the kernel options PSM_HOOKRESUME and PSM_RESETAFTERSUSPEND, so that we don't need to recompile the kernel when we need these functions. - Properly keep track of the irq resource. - Add a watchdog timer in case interrupts are lost (experimental). - Add `detach' function (experimental).
2000-03-18 15:21:40 +00:00
empty_both_buffers(kbdc, 10);
2008-04-08 19:09:45 +00:00
if (!set_controller_command_byte(kbdc, 0xff, command_byte)) {
log(LOG_ERR, "psm: failed to restore the keyboard controller "
"command byte.\n");
empty_both_buffers(kbdc, 10);
return (FALSE);
} else {
empty_both_buffers(kbdc, 10);
return (TRUE);
}
}
2008-04-08 19:09:45 +00:00
/*
* Re-initialize the aux port and device. The aux port must be enabled
2008-04-08 19:09:45 +00:00
* and its interrupt must be disabled before calling this routine.
* The aux device will be disabled before returning.
* The keyboard controller must be locked via `kbdc_lock()' before
* calling this routine.
*/
static int
doinitialize(struct psm_softc *sc, mousemode_t *mode)
{
2008-04-08 19:09:45 +00:00
KBDC kbdc = sc->kbdc;
int stat[3];
int i;
switch((i = test_aux_port(kbdc))) {
case 1: /* ignore these errors */
case 2:
case 3:
case PSM_ACK:
if (verbose)
log(LOG_DEBUG,
"psm%d: strange result for test aux port (%d).\n",
sc->unit, i);
/* FALLTHROUGH */
case 0: /* no error */
break;
2008-04-08 19:09:45 +00:00
case -1: /* time out */
default: /* error */
recover_from_error(kbdc);
if (sc->config & PSM_CONFIG_IGNPORTERROR)
break;
log(LOG_ERR, "psm%d: the aux port is not functioning (%d).\n",
sc->unit, i);
return (FALSE);
}
if (sc->config & PSM_CONFIG_NORESET) {
/*
* Don't try to reset the pointing device. It may possibly
* be left in the unknown state, though...
*/
} else {
/*
* NOTE: some controllers appears to hang the `keyboard' when
* the aux port doesn't exist and `PSMC_RESET_DEV' is issued.
*/
if (!reset_aux_dev(kbdc)) {
recover_from_error(kbdc);
log(LOG_ERR, "psm%d: failed to reset the aux device.\n",
sc->unit);
return (FALSE);
}
}
2008-04-08 19:09:45 +00:00
/*
* both the aux port and the aux device is functioning, see
* if the device can be enabled.
*/
if (!enable_aux_dev(kbdc) || !disable_aux_dev(kbdc)) {
log(LOG_ERR, "psm%d: failed to enable the aux device.\n",
sc->unit);
return (FALSE);
}
empty_both_buffers(kbdc, 10); /* remove stray data if any */
/* Re-enable the mouse. */
for (i = 0; vendortype[i].probefunc != NULL; ++i)
if (vendortype[i].model == sc->hw.model)
(*vendortype[i].probefunc)(sc->kbdc, NULL);
2008-04-08 19:09:45 +00:00
/* set mouse parameters */
if (mode != (mousemode_t *)NULL) {
if (mode->rate > 0)
mode->rate = set_mouse_sampling_rate(kbdc, mode->rate);
if (mode->resolution >= 0)
mode->resolution =
set_mouse_resolution(kbdc, mode->resolution);
set_mouse_scaling(kbdc, 1);
set_mouse_mode(kbdc);
}
2008-04-08 19:09:45 +00:00
/* Record sync on the next data packet we see. */
sc->flags |= PSM_NEED_SYNCBITS;
2008-04-08 19:09:45 +00:00
/* just check the status of the mouse */
if (get_mouse_status(kbdc, stat, 0, 3) < 3)
log(LOG_DEBUG, "psm%d: failed to get status (doinitialize).\n",
sc->unit);
2008-04-08 19:09:45 +00:00
return (TRUE);
}
static int
doopen(struct psm_softc *sc, int command_byte)
{
2008-04-08 19:09:45 +00:00
int stat[3];
/*
* FIXME: Synaptics TouchPad seems to go back to Relative Mode with
* no obvious reason. Thus we check the current mode and restore the
* Absolute Mode if it was cleared.
*
* The previous hack at the end of psmprobe() wasn't efficient when
* moused(8) was restarted.
*
* A Reset (FF) or Set Defaults (F6) command would clear the
* Absolute Mode bit. But a verbose boot or debug.psm.loglevel=5
* doesn't show any evidence of such a command.
*/
if (sc->hw.model == MOUSE_MODEL_SYNAPTICS) {
mouse_ext_command(sc->kbdc, 1);
get_mouse_status(sc->kbdc, stat, 0, 3);
if ((SYNAPTICS_VERSION_GE(sc->synhw, 7, 5) ||
stat[1] == 0x47) &&
stat[2] == 0x40) {
/* Set the mode byte -- request wmode where
* available */
if (sc->synhw.capExtended)
mouse_ext_command(sc->kbdc, 0xc1);
else
mouse_ext_command(sc->kbdc, 0xc0);
set_mouse_sampling_rate(sc->kbdc, 20);
VLOG(5, (LOG_DEBUG, "psm%d: Synaptis Absolute Mode "
"hopefully restored\n",
sc->unit));
}
}
/*
* A user may want to disable tap and drag gestures on a Synaptics
* TouchPad when it operates in Relative Mode.
*/
if (sc->hw.model == MOUSE_MODEL_GENERIC) {
if (tap_enabled > 0) {
/*
* Enable tap & drag gestures. We use a Mode Byte
* and clear the DisGest bit (see §2.5 of Synaptics
* TouchPad Interfacing Guide).
*/
VLOG(2, (LOG_DEBUG,
"psm%d: enable tap and drag gestures\n",
sc->unit));
mouse_ext_command(sc->kbdc, 0x00);
set_mouse_sampling_rate(sc->kbdc, 20);
} else if (tap_enabled == 0) {
/*
* Disable tap & drag gestures. We use a Mode Byte
* and set the DisGest bit (see §2.5 of Synaptics
* TouchPad Interfacing Guide).
*/
VLOG(2, (LOG_DEBUG,
"psm%d: disable tap and drag gestures\n",
sc->unit));
mouse_ext_command(sc->kbdc, 0x04);
set_mouse_sampling_rate(sc->kbdc, 20);
}
}
2008-04-08 19:09:45 +00:00
/* enable the mouse device */
if (!enable_aux_dev(sc->kbdc)) {
/* MOUSE ERROR: failed to enable the mouse because:
* 1) the mouse is faulty,
* 2) the mouse has been removed(!?)
* In the latter case, the keyboard may have hung, and need
* recovery procedure...
*/
recover_from_error(sc->kbdc);
#if 0
2008-04-08 19:09:45 +00:00
/* FIXME: we could reset the mouse here and try to enable
* it again. But it will take long time and it's not a good
* idea to disable the keyboard that long...
*/
if (!doinitialize(sc, &sc->mode) || !enable_aux_dev(sc->kbdc)) {
recover_from_error(sc->kbdc);
#else
2008-04-08 19:09:45 +00:00
{
#endif
2008-04-08 19:09:45 +00:00
restore_controller(sc->kbdc, command_byte);
/* mark this device is no longer available */
sc->state &= ~PSM_VALID;
log(LOG_ERR,
"psm%d: failed to enable the device (doopen).\n",
sc->unit);
return (EIO);
}
}
2008-04-08 19:09:45 +00:00
if (get_mouse_status(sc->kbdc, stat, 0, 3) < 3)
log(LOG_DEBUG, "psm%d: failed to get status (doopen).\n",
sc->unit);
2008-04-08 19:09:45 +00:00
/* enable the aux port and interrupt */
if (!set_controller_command_byte(sc->kbdc,
kbdc_get_device_mask(sc->kbdc),
2008-04-08 19:09:45 +00:00
(command_byte & KBD_KBD_CONTROL_BITS) |
KBD_ENABLE_AUX_PORT | KBD_ENABLE_AUX_INT)) {
/* CONTROLLER ERROR */
disable_aux_dev(sc->kbdc);
restore_controller(sc->kbdc, command_byte);
log(LOG_ERR,
"psm%d: failed to enable the aux interrupt (doopen).\n",
sc->unit);
return (EIO);
}
/* start the watchdog timer */
sc->watchdog = FALSE;
callout_reset(&sc->callout, hz * 2, psmtimeout, sc);
2008-04-08 19:09:45 +00:00
return (0);
}
static int
reinitialize(struct psm_softc *sc, int doinit)
{
2008-04-08 19:09:45 +00:00
int err;
int c;
int s;
/* don't let anybody mess with the aux device */
if (!kbdc_lock(sc->kbdc, TRUE))
return (EIO);
s = spltty();
/* block our watchdog timer */
sc->watchdog = FALSE;
callout_stop(&sc->callout);
2008-04-08 19:09:45 +00:00
/* save the current controller command byte */
empty_both_buffers(sc->kbdc, 10);
c = get_controller_command_byte(sc->kbdc);
VLOG(2, (LOG_DEBUG,
"psm%d: current command byte: %04x (reinitialize).\n",
sc->unit, c));
/* enable the aux port but disable the aux interrupt and the keyboard */
if ((c == -1) || !set_controller_command_byte(sc->kbdc,
kbdc_get_device_mask(sc->kbdc),
2008-04-08 19:09:45 +00:00
KBD_DISABLE_KBD_PORT | KBD_DISABLE_KBD_INT |
KBD_ENABLE_AUX_PORT | KBD_DISABLE_AUX_INT)) {
/* CONTROLLER ERROR */
splx(s);
kbdc_lock(sc->kbdc, FALSE);
log(LOG_ERR,
"psm%d: unable to set the command byte (reinitialize).\n",
sc->unit);
return (EIO);
}
/* flush any data */
if (sc->state & PSM_VALID) {
/* this may fail; but never mind... */
disable_aux_dev(sc->kbdc);
empty_aux_buffer(sc->kbdc, 10);
}
flushpackets(sc);
sc->syncerrors = 0;
sc->pkterrors = 0;
memset(&sc->lastinputerr, 0, sizeof(sc->lastinputerr));
/* try to detect the aux device; are you still there? */
err = 0;
if (doinit) {
if (doinitialize(sc, &sc->mode)) {
/* yes */
sc->state |= PSM_VALID;
} else {
/* the device has gone! */
restore_controller(sc->kbdc, c);
sc->state &= ~PSM_VALID;
log(LOG_ERR,
"psm%d: the aux device has gone! (reinitialize).\n",
sc->unit);
err = ENXIO;
}
}
splx(s);
2008-04-08 19:09:45 +00:00
/* restore the driver state */
if ((sc->state & PSM_OPEN) && (err == 0)) {
/* enable the aux device and the port again */
err = doopen(sc, c);
if (err != 0)
log(LOG_ERR, "psm%d: failed to enable the device "
"(reinitialize).\n", sc->unit);
} else {
2008-04-08 19:09:45 +00:00
/* restore the keyboard port and disable the aux port */
if (!set_controller_command_byte(sc->kbdc,
kbdc_get_device_mask(sc->kbdc),
(c & KBD_KBD_CONTROL_BITS) |
KBD_DISABLE_AUX_PORT | KBD_DISABLE_AUX_INT)) {
/* CONTROLLER ERROR */
log(LOG_ERR, "psm%d: failed to disable the aux port "
"(reinitialize).\n", sc->unit);
err = EIO;
}
}
kbdc_lock(sc->kbdc, FALSE);
return (err);
}
/* psm driver entry points */
static void
psmidentify(driver_t *driver, device_t parent)
{
2008-04-08 19:09:45 +00:00
device_t psmc;
device_t psm;
u_long irq;
int unit;
unit = device_get_unit(parent);
/* always add at least one child */
psm = BUS_ADD_CHILD(parent, KBDC_RID_AUX, driver->name, unit);
if (psm == NULL)
return;
irq = bus_get_resource_start(psm, SYS_RES_IRQ, KBDC_RID_AUX);
if (irq > 0)
return;
/*
* If the PS/2 mouse device has already been reported by ACPI or
* PnP BIOS, obtain the IRQ resource from it.
* (See psmcpnp_attach() below.)
*/
psmc = device_find_child(device_get_parent(parent),
PSMCPNP_DRIVER_NAME, unit);
if (psmc == NULL)
return;
irq = bus_get_resource_start(psmc, SYS_RES_IRQ, 0);
if (irq <= 0)
return;
bus_delete_resource(psmc, SYS_RES_IRQ, 0);
2008-04-08 19:09:45 +00:00
bus_set_resource(psm, SYS_RES_IRQ, KBDC_RID_AUX, irq, 1);
}
2008-04-08 19:09:45 +00:00
#define endprobe(v) do { \
if (bootverbose) \
--verbose; \
kbdc_set_device_mask(sc->kbdc, mask); \
kbdc_lock(sc->kbdc, FALSE); \
return (v); \
} while (0)
static int
psmprobe(device_t dev)
{
2008-04-08 19:09:45 +00:00
int unit = device_get_unit(dev);
struct psm_softc *sc = device_get_softc(dev);
int stat[3];
int command_byte;
int mask;
int rid;
int i;
#if 0
2008-04-08 19:09:45 +00:00
kbdc_debug(TRUE);
#endif
- Add Support for the following PS/2 mice: - Microsoft IntelliMouse Explorer: 2 buttons on top, 2 side buttons and a wheel which also acts as the middle button. The mouse is recognized as "IntelliMouse Explorer". - Genius NetScroll Optical: 2 buttons on top, 2 side buttons and a wheel which also acts as the middle button. The mouse is recognized as "NetMouse/NetScroll Optical". - MouseSystems SmartScroll Mouse (OEM from Genius?): 3 buttons on top, 1 side button and a wheel. The mouse is recognized as Genius "NetScroll". - IBM ScrollPoint: 2 buttons on top and a stick between the buttons. The stick can perform "horizontal scroll" in W*ndows environment. The horizontal movement of the stick is detected. It is currently mapped to the Z axis movement in the same way as the first wheel. The mouse is recognized as "MouseMan+", as it is considered to be a variation of MouseMan. - A4 Tech 4D and 4D+ mice. These mice have two wheels! The movement of the second wheel is reported as the Z axis movement in the same way as the first wheel. These mice are recognized as "4D Mouse" and "4D+ Mouse". - Tweak IntelliMouse support code a bit so that less-than-compatible wheel mice can work properly with the psm driver. - Add driver configuration flags which correspond to the kernel options PSM_HOOKRESUME and PSM_RESETAFTERSUSPEND, so that we don't need to recompile the kernel when we need these functions. - Properly keep track of the irq resource. - Add a watchdog timer in case interrupts are lost (experimental). - Add `detach' function (experimental).
2000-03-18 15:21:40 +00:00
2008-04-08 19:09:45 +00:00
/* see if IRQ is available */
rid = KBDC_RID_AUX;
sc->intr = bus_alloc_resource_any(dev, SYS_RES_IRQ, &rid, RF_ACTIVE);
2008-04-08 19:09:45 +00:00
if (sc->intr == NULL) {
if (bootverbose)
device_printf(dev, "unable to allocate IRQ\n");
return (ENXIO);
}
bus_release_resource(dev, SYS_RES_IRQ, rid, sc->intr);
sc->unit = unit;
sc->kbdc = atkbdc_open(device_get_unit(device_get_parent(dev)));
sc->config = device_get_flags(dev) & PSM_CONFIG_FLAGS;
/* XXX: for backward compatibility */
- Add Support for the following PS/2 mice: - Microsoft IntelliMouse Explorer: 2 buttons on top, 2 side buttons and a wheel which also acts as the middle button. The mouse is recognized as "IntelliMouse Explorer". - Genius NetScroll Optical: 2 buttons on top, 2 side buttons and a wheel which also acts as the middle button. The mouse is recognized as "NetMouse/NetScroll Optical". - MouseSystems SmartScroll Mouse (OEM from Genius?): 3 buttons on top, 1 side button and a wheel. The mouse is recognized as Genius "NetScroll". - IBM ScrollPoint: 2 buttons on top and a stick between the buttons. The stick can perform "horizontal scroll" in W*ndows environment. The horizontal movement of the stick is detected. It is currently mapped to the Z axis movement in the same way as the first wheel. The mouse is recognized as "MouseMan+", as it is considered to be a variation of MouseMan. - A4 Tech 4D and 4D+ mice. These mice have two wheels! The movement of the second wheel is reported as the Z axis movement in the same way as the first wheel. These mice are recognized as "4D Mouse" and "4D+ Mouse". - Tweak IntelliMouse support code a bit so that less-than-compatible wheel mice can work properly with the psm driver. - Add driver configuration flags which correspond to the kernel options PSM_HOOKRESUME and PSM_RESETAFTERSUSPEND, so that we don't need to recompile the kernel when we need these functions. - Properly keep track of the irq resource. - Add a watchdog timer in case interrupts are lost (experimental). - Add `detach' function (experimental).
2000-03-18 15:21:40 +00:00
#if defined(PSM_HOOKRESUME) || defined(PSM_HOOKAPM)
2008-04-08 19:09:45 +00:00
sc->config |=
- Add Support for the following PS/2 mice: - Microsoft IntelliMouse Explorer: 2 buttons on top, 2 side buttons and a wheel which also acts as the middle button. The mouse is recognized as "IntelliMouse Explorer". - Genius NetScroll Optical: 2 buttons on top, 2 side buttons and a wheel which also acts as the middle button. The mouse is recognized as "NetMouse/NetScroll Optical". - MouseSystems SmartScroll Mouse (OEM from Genius?): 3 buttons on top, 1 side button and a wheel. The mouse is recognized as Genius "NetScroll". - IBM ScrollPoint: 2 buttons on top and a stick between the buttons. The stick can perform "horizontal scroll" in W*ndows environment. The horizontal movement of the stick is detected. It is currently mapped to the Z axis movement in the same way as the first wheel. The mouse is recognized as "MouseMan+", as it is considered to be a variation of MouseMan. - A4 Tech 4D and 4D+ mice. These mice have two wheels! The movement of the second wheel is reported as the Z axis movement in the same way as the first wheel. These mice are recognized as "4D Mouse" and "4D+ Mouse". - Tweak IntelliMouse support code a bit so that less-than-compatible wheel mice can work properly with the psm driver. - Add driver configuration flags which correspond to the kernel options PSM_HOOKRESUME and PSM_RESETAFTERSUSPEND, so that we don't need to recompile the kernel when we need these functions. - Properly keep track of the irq resource. - Add a watchdog timer in case interrupts are lost (experimental). - Add `detach' function (experimental).
2000-03-18 15:21:40 +00:00
#ifdef PSM_RESETAFTERSUSPEND
PSM_CONFIG_INITAFTERSUSPEND;
- Add Support for the following PS/2 mice: - Microsoft IntelliMouse Explorer: 2 buttons on top, 2 side buttons and a wheel which also acts as the middle button. The mouse is recognized as "IntelliMouse Explorer". - Genius NetScroll Optical: 2 buttons on top, 2 side buttons and a wheel which also acts as the middle button. The mouse is recognized as "NetMouse/NetScroll Optical". - MouseSystems SmartScroll Mouse (OEM from Genius?): 3 buttons on top, 1 side button and a wheel. The mouse is recognized as Genius "NetScroll". - IBM ScrollPoint: 2 buttons on top and a stick between the buttons. The stick can perform "horizontal scroll" in W*ndows environment. The horizontal movement of the stick is detected. It is currently mapped to the Z axis movement in the same way as the first wheel. The mouse is recognized as "MouseMan+", as it is considered to be a variation of MouseMan. - A4 Tech 4D and 4D+ mice. These mice have two wheels! The movement of the second wheel is reported as the Z axis movement in the same way as the first wheel. These mice are recognized as "4D Mouse" and "4D+ Mouse". - Tweak IntelliMouse support code a bit so that less-than-compatible wheel mice can work properly with the psm driver. - Add driver configuration flags which correspond to the kernel options PSM_HOOKRESUME and PSM_RESETAFTERSUSPEND, so that we don't need to recompile the kernel when we need these functions. - Properly keep track of the irq resource. - Add a watchdog timer in case interrupts are lost (experimental). - Add `detach' function (experimental).
2000-03-18 15:21:40 +00:00
#else
PSM_CONFIG_HOOKRESUME;
#endif
#endif /* PSM_HOOKRESUME | PSM_HOOKAPM */
2008-04-08 19:09:45 +00:00
sc->flags = 0;
if (bootverbose)
++verbose;
device_set_desc(dev, "PS/2 Mouse");
if (!kbdc_lock(sc->kbdc, TRUE)) {
printf("psm%d: unable to lock the controller.\n", unit);
if (bootverbose)
--verbose;
return (ENXIO);
}
/*
* NOTE: two bits in the command byte controls the operation of the
* aux port (mouse port): the aux port disable bit (bit 5) and the aux
* port interrupt (IRQ 12) enable bit (bit 2).
*/
2008-04-08 19:09:45 +00:00
/* discard anything left after the keyboard initialization */
empty_both_buffers(sc->kbdc, 10);
/* save the current command byte; it will be used later */
mask = kbdc_get_device_mask(sc->kbdc) & ~KBD_AUX_CONTROL_BITS;
command_byte = get_controller_command_byte(sc->kbdc);
if (verbose)
printf("psm%d: current command byte:%04x\n", unit,
command_byte);
if (command_byte == -1) {
/* CONTROLLER ERROR */
printf("psm%d: unable to get the current command byte value.\n",
unit);
endprobe(ENXIO);
}
/*
* disable the keyboard port while probing the aux port, which must be
* enabled during this routine
*/
2008-04-08 19:09:45 +00:00
if (!set_controller_command_byte(sc->kbdc,
KBD_KBD_CONTROL_BITS | KBD_AUX_CONTROL_BITS,
KBD_DISABLE_KBD_PORT | KBD_DISABLE_KBD_INT |
KBD_ENABLE_AUX_PORT | KBD_DISABLE_AUX_INT)) {
/*
* this is CONTROLLER ERROR; I don't know how to recover
* from this error...
*/
restore_controller(sc->kbdc, command_byte);
printf("psm%d: unable to set the command byte.\n", unit);
endprobe(ENXIO);
}
write_controller_command(sc->kbdc, KBDC_ENABLE_AUX_PORT);
/*
2008-04-08 19:09:45 +00:00
* NOTE: `test_aux_port()' is designed to return with zero if the aux
* port exists and is functioning. However, some controllers appears
* to respond with zero even when the aux port doesn't exist. (It may
* be that this is only the case when the controller DOES have the aux
* port but the port is not wired on the motherboard.) The keyboard
* controllers without the port, such as the original AT, are
* supposed to return with an error code or simply time out. In any
2008-04-08 19:09:45 +00:00
* case, we have to continue probing the port even when the controller
* passes this test.
*
2008-04-08 19:09:45 +00:00
* XXX: some controllers erroneously return the error code 1, 2 or 3
* when it has a perfectly functional aux port. We have to ignore
2008-04-08 19:09:45 +00:00
* this error code. Even if the controller HAS error with the aux
* port, it will be detected later...
* XXX: another incompatible controller returns PSM_ACK (0xfa)...
*/
2008-04-08 19:09:45 +00:00
switch ((i = test_aux_port(sc->kbdc))) {
case 1: /* ignore these errors */
case 2:
case 3:
case PSM_ACK:
if (verbose)
printf("psm%d: strange result for test aux port "
"(%d).\n", unit, i);
/* FALLTHROUGH */
case 0: /* no error */
break;
2008-04-08 19:09:45 +00:00
case -1: /* time out */
default: /* error */
recover_from_error(sc->kbdc);
if (sc->config & PSM_CONFIG_IGNPORTERROR)
break;
restore_controller(sc->kbdc, command_byte);
if (verbose)
printf("psm%d: the aux port is not functioning (%d).\n",
unit, i);
endprobe(ENXIO);
}
if (sc->config & PSM_CONFIG_NORESET) {
/*
* Don't try to reset the pointing device. It may possibly be
* left in an unknown state, though...
2008-04-08 19:09:45 +00:00
*/
} else {
/*
* NOTE: some controllers appears to hang the `keyboard' when
* the aux port doesn't exist and `PSMC_RESET_DEV' is issued.
*
* Attempt to reset the controller twice -- this helps
* pierce through some KVM switches. The second reset
* is non-fatal.
*/
if (!reset_aux_dev(sc->kbdc)) {
recover_from_error(sc->kbdc);
restore_controller(sc->kbdc, command_byte);
if (verbose)
printf("psm%d: failed to reset the aux "
"device.\n", unit);
endprobe(ENXIO);
} else if (!reset_aux_dev(sc->kbdc)) {
recover_from_error(sc->kbdc);
if (verbose >= 2)
printf("psm%d: failed to reset the aux device "
"(2).\n", unit);
}
}
/*
* both the aux port and the aux device are functioning, see if the
2008-04-08 19:09:45 +00:00
* device can be enabled. NOTE: when enabled, the device will start
* sending data; we shall immediately disable the device once we know
* the device can be enabled.
*/
if (!enable_aux_dev(sc->kbdc) || !disable_aux_dev(sc->kbdc)) {
/* MOUSE ERROR */
recover_from_error(sc->kbdc);
restore_controller(sc->kbdc, command_byte);
if (verbose)
printf("psm%d: failed to enable the aux device.\n",
unit);
endprobe(ENXIO);
}
/* save the default values after reset */
if (get_mouse_status(sc->kbdc, stat, 0, 3) >= 3) {
sc->dflt_mode.rate = sc->mode.rate = stat[2];
sc->dflt_mode.resolution = sc->mode.resolution = stat[1];
} else {
sc->dflt_mode.rate = sc->mode.rate = -1;
sc->dflt_mode.resolution = sc->mode.resolution = -1;
}
/* hardware information */
sc->hw.iftype = MOUSE_IF_PS2;
/* verify the device is a mouse */
sc->hw.hwid = get_aux_id(sc->kbdc);
if (!is_a_mouse(sc->hw.hwid)) {
restore_controller(sc->kbdc, command_byte);
if (verbose)
printf("psm%d: unknown device type (%d).\n", unit,
sc->hw.hwid);
endprobe(ENXIO);
}
switch (sc->hw.hwid) {
case PSM_BALLPOINT_ID:
sc->hw.type = MOUSE_TRACKBALL;
break;
case PSM_MOUSE_ID:
case PSM_INTELLI_ID:
case PSM_EXPLORER_ID:
case PSM_4DMOUSE_ID:
case PSM_4DPLUS_ID:
sc->hw.type = MOUSE_MOUSE;
break;
default:
sc->hw.type = MOUSE_UNKNOWN;
break;
}
if (sc->config & PSM_CONFIG_NOIDPROBE) {
sc->hw.buttons = 2;
i = GENERIC_MOUSE_ENTRY;
} else {
/* # of buttons */
sc->hw.buttons = get_mouse_buttons(sc->kbdc);
/* other parameters */
for (i = 0; vendortype[i].probefunc != NULL; ++i)
if ((*vendortype[i].probefunc)(sc->kbdc, sc)) {
2008-04-08 19:09:45 +00:00
if (verbose >= 2)
printf("psm%d: found %s\n", unit,
model_name(vendortype[i].model));
break;
}
}
sc->hw.model = vendortype[i].model;
sc->dflt_mode.level = PSM_LEVEL_BASE;
sc->dflt_mode.packetsize = MOUSE_PS2_PACKETSIZE;
sc->dflt_mode.accelfactor = (sc->config & PSM_CONFIG_ACCEL) >> 4;
if (sc->config & PSM_CONFIG_NOCHECKSYNC)
sc->dflt_mode.syncmask[0] = 0;
else
sc->dflt_mode.syncmask[0] = vendortype[i].syncmask;
if (sc->config & PSM_CONFIG_FORCETAP)
sc->dflt_mode.syncmask[0] &= ~MOUSE_PS2_TAP;
sc->dflt_mode.syncmask[1] = 0; /* syncbits */
sc->mode = sc->dflt_mode;
sc->mode.packetsize = vendortype[i].packetsize;
/* set mouse parameters */
#if 0
2008-04-08 19:09:45 +00:00
/*
* A version of Logitech FirstMouse+ won't report wheel movement,
* if SET_DEFAULTS is sent... Don't use this command.
* This fix was found by Takashi Nishida.
*/
i = send_aux_command(sc->kbdc, PSMC_SET_DEFAULTS);
if (verbose >= 2)
printf("psm%d: SET_DEFAULTS return code:%04x\n", unit, i);
#endif
2008-04-08 19:09:45 +00:00
if (sc->config & PSM_CONFIG_RESOLUTION)
sc->mode.resolution =
set_mouse_resolution(sc->kbdc,
(sc->config & PSM_CONFIG_RESOLUTION) - 1);
else if (sc->mode.resolution >= 0)
sc->mode.resolution =
set_mouse_resolution(sc->kbdc, sc->dflt_mode.resolution);
if (sc->mode.rate > 0)
sc->mode.rate =
set_mouse_sampling_rate(sc->kbdc, sc->dflt_mode.rate);
set_mouse_scaling(sc->kbdc, 1);
/* Record sync on the next data packet we see. */
sc->flags |= PSM_NEED_SYNCBITS;
/* just check the status of the mouse */
/*
* NOTE: XXX there are some arcane controller/mouse combinations out
* there, which hung the controller unless there is data transmission
* after ACK from the mouse.
*/
2008-04-08 19:09:45 +00:00
if (get_mouse_status(sc->kbdc, stat, 0, 3) < 3)
printf("psm%d: failed to get status.\n", unit);
else {
/*
* When in its native mode, some mice operate with different
* default parameters than in the PS/2 compatible mode.
*/
sc->dflt_mode.rate = sc->mode.rate = stat[2];
sc->dflt_mode.resolution = sc->mode.resolution = stat[1];
}
2008-04-08 19:09:45 +00:00
/* disable the aux port for now... */
if (!set_controller_command_byte(sc->kbdc,
KBD_KBD_CONTROL_BITS | KBD_AUX_CONTROL_BITS,
2008-04-08 19:09:45 +00:00
(command_byte & KBD_KBD_CONTROL_BITS) |
KBD_DISABLE_AUX_PORT | KBD_DISABLE_AUX_INT)) {
/*
* this is CONTROLLER ERROR; I don't know the proper way to
* recover from this error...
*/
restore_controller(sc->kbdc, command_byte);
printf("psm%d: unable to set the command byte.\n", unit);
endprobe(ENXIO);
}
/* done */
kbdc_set_device_mask(sc->kbdc, mask | KBD_AUX_CONTROL_BITS);
kbdc_lock(sc->kbdc, FALSE);
return (0);
}
static int
psmattach(device_t dev)
{
2008-04-08 19:09:45 +00:00
int unit = device_get_unit(dev);
struct psm_softc *sc = device_get_softc(dev);
int error;
int rid;
/* Setup initial state */
sc->state = PSM_VALID;
callout_init(&sc->callout, 0);
callout_init(&sc->softcallout, 0);
2008-04-08 19:09:45 +00:00
/* Setup our interrupt handler */
rid = KBDC_RID_AUX;
sc->intr = bus_alloc_resource_any(dev, SYS_RES_IRQ, &rid, RF_ACTIVE);
2008-04-08 19:09:45 +00:00
if (sc->intr == NULL)
return (ENXIO);
error = bus_setup_intr(dev, sc->intr, INTR_TYPE_TTY, NULL, psmintr, sc,
&sc->ih);
if (error) {
bus_release_resource(dev, SYS_RES_IRQ, rid, sc->intr);
return (error);
}
/* Done */
sc->dev = make_dev(&psm_cdevsw, 0, 0, 0, 0666, "psm%d", unit);
sc->dev->si_drv1 = sc;
sc->bdev = make_dev(&psm_cdevsw, 0, 0, 0, 0666, "bpsm%d", unit);
sc->bdev->si_drv1 = sc;
2008-04-08 19:09:45 +00:00
/* Some touchpad devices need full reinitialization after suspend. */
switch (sc->hw.model) {
case MOUSE_MODEL_SYNAPTICS:
case MOUSE_MODEL_GLIDEPOINT:
case MOUSE_MODEL_VERSAPAD:
sc->config |= PSM_CONFIG_INITAFTERSUSPEND;
break;
default:
if (sc->synhw.infoMajor >= 4 || sc->tphw > 0)
sc->config |= PSM_CONFIG_INITAFTERSUSPEND;
break;
}
2008-04-08 19:09:45 +00:00
if (!verbose)
printf("psm%d: model %s, device ID %d\n",
unit, model_name(sc->hw.model), sc->hw.hwid & 0x00ff);
else {
printf("psm%d: model %s, device ID %d-%02x, %d buttons\n",
unit, model_name(sc->hw.model), sc->hw.hwid & 0x00ff,
sc->hw.hwid >> 8, sc->hw.buttons);
printf("psm%d: config:%08x, flags:%08x, packet size:%d\n",
unit, sc->config, sc->flags, sc->mode.packetsize);
printf("psm%d: syncmask:%02x, syncbits:%02x\n",
unit, sc->mode.syncmask[0], sc->mode.syncmask[1]);
}
if (bootverbose)
--verbose;
return (0);
}
- Add Support for the following PS/2 mice: - Microsoft IntelliMouse Explorer: 2 buttons on top, 2 side buttons and a wheel which also acts as the middle button. The mouse is recognized as "IntelliMouse Explorer". - Genius NetScroll Optical: 2 buttons on top, 2 side buttons and a wheel which also acts as the middle button. The mouse is recognized as "NetMouse/NetScroll Optical". - MouseSystems SmartScroll Mouse (OEM from Genius?): 3 buttons on top, 1 side button and a wheel. The mouse is recognized as Genius "NetScroll". - IBM ScrollPoint: 2 buttons on top and a stick between the buttons. The stick can perform "horizontal scroll" in W*ndows environment. The horizontal movement of the stick is detected. It is currently mapped to the Z axis movement in the same way as the first wheel. The mouse is recognized as "MouseMan+", as it is considered to be a variation of MouseMan. - A4 Tech 4D and 4D+ mice. These mice have two wheels! The movement of the second wheel is reported as the Z axis movement in the same way as the first wheel. These mice are recognized as "4D Mouse" and "4D+ Mouse". - Tweak IntelliMouse support code a bit so that less-than-compatible wheel mice can work properly with the psm driver. - Add driver configuration flags which correspond to the kernel options PSM_HOOKRESUME and PSM_RESETAFTERSUSPEND, so that we don't need to recompile the kernel when we need these functions. - Properly keep track of the irq resource. - Add a watchdog timer in case interrupts are lost (experimental). - Add `detach' function (experimental).
2000-03-18 15:21:40 +00:00
static int
psmdetach(device_t dev)
{
2008-04-08 19:09:45 +00:00
struct psm_softc *sc;
int rid;
- Add Support for the following PS/2 mice: - Microsoft IntelliMouse Explorer: 2 buttons on top, 2 side buttons and a wheel which also acts as the middle button. The mouse is recognized as "IntelliMouse Explorer". - Genius NetScroll Optical: 2 buttons on top, 2 side buttons and a wheel which also acts as the middle button. The mouse is recognized as "NetMouse/NetScroll Optical". - MouseSystems SmartScroll Mouse (OEM from Genius?): 3 buttons on top, 1 side button and a wheel. The mouse is recognized as Genius "NetScroll". - IBM ScrollPoint: 2 buttons on top and a stick between the buttons. The stick can perform "horizontal scroll" in W*ndows environment. The horizontal movement of the stick is detected. It is currently mapped to the Z axis movement in the same way as the first wheel. The mouse is recognized as "MouseMan+", as it is considered to be a variation of MouseMan. - A4 Tech 4D and 4D+ mice. These mice have two wheels! The movement of the second wheel is reported as the Z axis movement in the same way as the first wheel. These mice are recognized as "4D Mouse" and "4D+ Mouse". - Tweak IntelliMouse support code a bit so that less-than-compatible wheel mice can work properly with the psm driver. - Add driver configuration flags which correspond to the kernel options PSM_HOOKRESUME and PSM_RESETAFTERSUSPEND, so that we don't need to recompile the kernel when we need these functions. - Properly keep track of the irq resource. - Add a watchdog timer in case interrupts are lost (experimental). - Add `detach' function (experimental).
2000-03-18 15:21:40 +00:00
2008-04-08 19:09:45 +00:00
sc = device_get_softc(dev);
if (sc->state & PSM_OPEN)
return (EBUSY);
- Add Support for the following PS/2 mice: - Microsoft IntelliMouse Explorer: 2 buttons on top, 2 side buttons and a wheel which also acts as the middle button. The mouse is recognized as "IntelliMouse Explorer". - Genius NetScroll Optical: 2 buttons on top, 2 side buttons and a wheel which also acts as the middle button. The mouse is recognized as "NetMouse/NetScroll Optical". - MouseSystems SmartScroll Mouse (OEM from Genius?): 3 buttons on top, 1 side button and a wheel. The mouse is recognized as Genius "NetScroll". - IBM ScrollPoint: 2 buttons on top and a stick between the buttons. The stick can perform "horizontal scroll" in W*ndows environment. The horizontal movement of the stick is detected. It is currently mapped to the Z axis movement in the same way as the first wheel. The mouse is recognized as "MouseMan+", as it is considered to be a variation of MouseMan. - A4 Tech 4D and 4D+ mice. These mice have two wheels! The movement of the second wheel is reported as the Z axis movement in the same way as the first wheel. These mice are recognized as "4D Mouse" and "4D+ Mouse". - Tweak IntelliMouse support code a bit so that less-than-compatible wheel mice can work properly with the psm driver. - Add driver configuration flags which correspond to the kernel options PSM_HOOKRESUME and PSM_RESETAFTERSUSPEND, so that we don't need to recompile the kernel when we need these functions. - Properly keep track of the irq resource. - Add a watchdog timer in case interrupts are lost (experimental). - Add `detach' function (experimental).
2000-03-18 15:21:40 +00:00
2008-04-08 19:09:45 +00:00
rid = KBDC_RID_AUX;
bus_teardown_intr(dev, sc->intr, sc->ih);
bus_release_resource(dev, SYS_RES_IRQ, rid, sc->intr);
- Add Support for the following PS/2 mice: - Microsoft IntelliMouse Explorer: 2 buttons on top, 2 side buttons and a wheel which also acts as the middle button. The mouse is recognized as "IntelliMouse Explorer". - Genius NetScroll Optical: 2 buttons on top, 2 side buttons and a wheel which also acts as the middle button. The mouse is recognized as "NetMouse/NetScroll Optical". - MouseSystems SmartScroll Mouse (OEM from Genius?): 3 buttons on top, 1 side button and a wheel. The mouse is recognized as Genius "NetScroll". - IBM ScrollPoint: 2 buttons on top and a stick between the buttons. The stick can perform "horizontal scroll" in W*ndows environment. The horizontal movement of the stick is detected. It is currently mapped to the Z axis movement in the same way as the first wheel. The mouse is recognized as "MouseMan+", as it is considered to be a variation of MouseMan. - A4 Tech 4D and 4D+ mice. These mice have two wheels! The movement of the second wheel is reported as the Z axis movement in the same way as the first wheel. These mice are recognized as "4D Mouse" and "4D+ Mouse". - Tweak IntelliMouse support code a bit so that less-than-compatible wheel mice can work properly with the psm driver. - Add driver configuration flags which correspond to the kernel options PSM_HOOKRESUME and PSM_RESETAFTERSUSPEND, so that we don't need to recompile the kernel when we need these functions. - Properly keep track of the irq resource. - Add a watchdog timer in case interrupts are lost (experimental). - Add `detach' function (experimental).
2000-03-18 15:21:40 +00:00
2008-04-08 19:09:45 +00:00
destroy_dev(sc->dev);
destroy_dev(sc->bdev);
- Add Support for the following PS/2 mice: - Microsoft IntelliMouse Explorer: 2 buttons on top, 2 side buttons and a wheel which also acts as the middle button. The mouse is recognized as "IntelliMouse Explorer". - Genius NetScroll Optical: 2 buttons on top, 2 side buttons and a wheel which also acts as the middle button. The mouse is recognized as "NetMouse/NetScroll Optical". - MouseSystems SmartScroll Mouse (OEM from Genius?): 3 buttons on top, 1 side button and a wheel. The mouse is recognized as Genius "NetScroll". - IBM ScrollPoint: 2 buttons on top and a stick between the buttons. The stick can perform "horizontal scroll" in W*ndows environment. The horizontal movement of the stick is detected. It is currently mapped to the Z axis movement in the same way as the first wheel. The mouse is recognized as "MouseMan+", as it is considered to be a variation of MouseMan. - A4 Tech 4D and 4D+ mice. These mice have two wheels! The movement of the second wheel is reported as the Z axis movement in the same way as the first wheel. These mice are recognized as "4D Mouse" and "4D+ Mouse". - Tweak IntelliMouse support code a bit so that less-than-compatible wheel mice can work properly with the psm driver. - Add driver configuration flags which correspond to the kernel options PSM_HOOKRESUME and PSM_RESETAFTERSUSPEND, so that we don't need to recompile the kernel when we need these functions. - Properly keep track of the irq resource. - Add a watchdog timer in case interrupts are lost (experimental). - Add `detach' function (experimental).
2000-03-18 15:21:40 +00:00
callout_drain(&sc->callout);
callout_drain(&sc->softcallout);
2008-04-08 19:09:45 +00:00
return (0);
- Add Support for the following PS/2 mice: - Microsoft IntelliMouse Explorer: 2 buttons on top, 2 side buttons and a wheel which also acts as the middle button. The mouse is recognized as "IntelliMouse Explorer". - Genius NetScroll Optical: 2 buttons on top, 2 side buttons and a wheel which also acts as the middle button. The mouse is recognized as "NetMouse/NetScroll Optical". - MouseSystems SmartScroll Mouse (OEM from Genius?): 3 buttons on top, 1 side button and a wheel. The mouse is recognized as Genius "NetScroll". - IBM ScrollPoint: 2 buttons on top and a stick between the buttons. The stick can perform "horizontal scroll" in W*ndows environment. The horizontal movement of the stick is detected. It is currently mapped to the Z axis movement in the same way as the first wheel. The mouse is recognized as "MouseMan+", as it is considered to be a variation of MouseMan. - A4 Tech 4D and 4D+ mice. These mice have two wheels! The movement of the second wheel is reported as the Z axis movement in the same way as the first wheel. These mice are recognized as "4D Mouse" and "4D+ Mouse". - Tweak IntelliMouse support code a bit so that less-than-compatible wheel mice can work properly with the psm driver. - Add driver configuration flags which correspond to the kernel options PSM_HOOKRESUME and PSM_RESETAFTERSUSPEND, so that we don't need to recompile the kernel when we need these functions. - Properly keep track of the irq resource. - Add a watchdog timer in case interrupts are lost (experimental). - Add `detach' function (experimental).
2000-03-18 15:21:40 +00:00
}
static int
psmopen(struct cdev *dev, int flag, int fmt, struct thread *td)
{
2008-04-08 19:09:45 +00:00
struct psm_softc *sc;
int command_byte;
int err;
int s;
/* Get device data */
sc = dev->si_drv1;
2008-04-08 19:09:45 +00:00
if ((sc == NULL) || (sc->state & PSM_VALID) == 0) {
/* the device is no longer valid/functioning */
return (ENXIO);
}
/* Disallow multiple opens */
if (sc->state & PSM_OPEN)
return (EBUSY);
device_busy(devclass_get_device(psm_devclass, sc->unit));
2008-04-08 19:09:45 +00:00
/* Initialize state */
sc->mode.level = sc->dflt_mode.level;
sc->mode.protocol = sc->dflt_mode.protocol;
sc->watchdog = FALSE;
sc->async = NULL;
2008-04-08 19:09:45 +00:00
/* flush the event queue */
sc->queue.count = 0;
sc->queue.head = 0;
sc->queue.tail = 0;
sc->status.flags = 0;
sc->status.button = 0;
sc->status.obutton = 0;
sc->status.dx = 0;
sc->status.dy = 0;
sc->status.dz = 0;
sc->button = 0;
sc->pqueue_start = 0;
sc->pqueue_end = 0;
/* empty input buffer */
flushpackets(sc);
sc->syncerrors = 0;
sc->pkterrors = 0;
/* don't let timeout routines in the keyboard driver to poll the kbdc */
if (!kbdc_lock(sc->kbdc, TRUE))
return (EIO);
/* save the current controller command byte */
s = spltty();
command_byte = get_controller_command_byte(sc->kbdc);
/* enable the aux port and temporalily disable the keyboard */
if (command_byte == -1 || !set_controller_command_byte(sc->kbdc,
kbdc_get_device_mask(sc->kbdc),
2008-04-08 19:09:45 +00:00
KBD_DISABLE_KBD_PORT | KBD_DISABLE_KBD_INT |
KBD_ENABLE_AUX_PORT | KBD_DISABLE_AUX_INT)) {
/* CONTROLLER ERROR; do you know how to get out of this? */
kbdc_lock(sc->kbdc, FALSE);
splx(s);
log(LOG_ERR,
"psm%d: unable to set the command byte (psmopen).\n",
sc->unit);
2008-04-08 19:09:45 +00:00
return (EIO);
}
/*
* Now that the keyboard controller is told not to generate
* the keyboard and mouse interrupts, call `splx()' to allow
* the other tty interrupts. The clock interrupt may also occur,
* but timeout routines will be blocked by the poll flag set
* via `kbdc_lock()'
*/
splx(s);
2008-04-08 19:09:45 +00:00
/* enable the mouse device */
err = doopen(sc, command_byte);
/* done */
if (err == 0)
sc->state |= PSM_OPEN;
kbdc_lock(sc->kbdc, FALSE);
return (err);
}
static int
psmclose(struct cdev *dev, int flag, int fmt, struct thread *td)
{
struct psm_softc *sc = dev->si_drv1;
2008-04-08 19:09:45 +00:00
int stat[3];
int command_byte;
int s;
/* don't let timeout routines in the keyboard driver to poll the kbdc */
if (!kbdc_lock(sc->kbdc, TRUE))
return (EIO);
/* save the current controller command byte */
s = spltty();
command_byte = get_controller_command_byte(sc->kbdc);
if (command_byte == -1) {
kbdc_lock(sc->kbdc, FALSE);
splx(s);
return (EIO);
}
2008-04-08 19:09:45 +00:00
/* disable the aux interrupt and temporalily disable the keyboard */
if (!set_controller_command_byte(sc->kbdc,
kbdc_get_device_mask(sc->kbdc),
2008-04-08 19:09:45 +00:00
KBD_DISABLE_KBD_PORT | KBD_DISABLE_KBD_INT |
KBD_ENABLE_AUX_PORT | KBD_DISABLE_AUX_INT)) {
log(LOG_ERR,
"psm%d: failed to disable the aux int (psmclose).\n",
sc->unit);
2008-04-08 19:09:45 +00:00
/* CONTROLLER ERROR;
* NOTE: we shall force our way through. Because the only
* ill effect we shall see is that we may not be able
* to read ACK from the mouse, and it doesn't matter much
* so long as the mouse will accept the DISABLE command.
*/
}
splx(s);
/* stop the watchdog timer */
callout_stop(&sc->callout);
2008-04-08 19:09:45 +00:00
/* remove anything left in the output buffer */
empty_aux_buffer(sc->kbdc, 10);
/* disable the aux device, port and interrupt */
if (sc->state & PSM_VALID) {
if (!disable_aux_dev(sc->kbdc)) {
/* MOUSE ERROR;
* NOTE: we don't return (error) and continue,
* pretending we have successfully disabled the device.
* It's OK because the interrupt routine will discard
* any data from the mouse hereafter.
*/
log(LOG_ERR,
"psm%d: failed to disable the device (psmclose).\n",
sc->unit);
2008-04-08 19:09:45 +00:00
}
if (get_mouse_status(sc->kbdc, stat, 0, 3) < 3)
log(LOG_DEBUG,
"psm%d: failed to get status (psmclose).\n",
sc->unit);
2008-04-08 19:09:45 +00:00
}
if (!set_controller_command_byte(sc->kbdc,
kbdc_get_device_mask(sc->kbdc),
2008-04-08 19:09:45 +00:00
(command_byte & KBD_KBD_CONTROL_BITS) |
KBD_DISABLE_AUX_PORT | KBD_DISABLE_AUX_INT)) {
/*
* CONTROLLER ERROR;
* we shall ignore this error; see the above comment.
*/
log(LOG_ERR,
"psm%d: failed to disable the aux port (psmclose).\n",
sc->unit);
2008-04-08 19:09:45 +00:00
}
/* remove anything left in the output buffer */
empty_aux_buffer(sc->kbdc, 10);
/* clean up and sigio requests */
if (sc->async != NULL) {
funsetown(&sc->async);
sc->async = NULL;
}
2008-04-08 19:09:45 +00:00
/* close is almost always successful */
sc->state &= ~PSM_OPEN;
kbdc_lock(sc->kbdc, FALSE);
device_unbusy(devclass_get_device(psm_devclass, sc->unit));
2008-04-08 19:09:45 +00:00
return (0);
}
static int
2008-04-08 19:09:45 +00:00
tame_mouse(struct psm_softc *sc, packetbuf_t *pb, mousestatus_t *status,
u_char *buf)
{
2008-04-08 19:09:45 +00:00
static u_char butmapps2[8] = {
0,
MOUSE_PS2_BUTTON1DOWN,
MOUSE_PS2_BUTTON2DOWN,
MOUSE_PS2_BUTTON1DOWN | MOUSE_PS2_BUTTON2DOWN,
MOUSE_PS2_BUTTON3DOWN,
MOUSE_PS2_BUTTON1DOWN | MOUSE_PS2_BUTTON3DOWN,
MOUSE_PS2_BUTTON2DOWN | MOUSE_PS2_BUTTON3DOWN,
MOUSE_PS2_BUTTON1DOWN | MOUSE_PS2_BUTTON2DOWN |
MOUSE_PS2_BUTTON3DOWN,
};
static u_char butmapmsc[8] = {
MOUSE_MSC_BUTTON1UP | MOUSE_MSC_BUTTON2UP |
MOUSE_MSC_BUTTON3UP,
MOUSE_MSC_BUTTON2UP | MOUSE_MSC_BUTTON3UP,
MOUSE_MSC_BUTTON1UP | MOUSE_MSC_BUTTON3UP,
MOUSE_MSC_BUTTON3UP,
MOUSE_MSC_BUTTON1UP | MOUSE_MSC_BUTTON2UP,
MOUSE_MSC_BUTTON2UP,
MOUSE_MSC_BUTTON1UP,
0,
};
int mapped;
int i;
if (sc->mode.level == PSM_LEVEL_BASE) {
mapped = status->button & ~MOUSE_BUTTON4DOWN;
if (status->button & MOUSE_BUTTON4DOWN)
mapped |= MOUSE_BUTTON1DOWN;
status->button = mapped;
buf[0] = MOUSE_PS2_SYNC | butmapps2[mapped & MOUSE_STDBUTTONS];
i = imax(imin(status->dx, 255), -256);
if (i < 0)
buf[0] |= MOUSE_PS2_XNEG;
buf[1] = i;
i = imax(imin(status->dy, 255), -256);
if (i < 0)
buf[0] |= MOUSE_PS2_YNEG;
buf[2] = i;
return (MOUSE_PS2_PACKETSIZE);
} else if (sc->mode.level == PSM_LEVEL_STANDARD) {
buf[0] = MOUSE_MSC_SYNC |
butmapmsc[status->button & MOUSE_STDBUTTONS];
i = imax(imin(status->dx, 255), -256);
buf[1] = i >> 1;
buf[3] = i - buf[1];
i = imax(imin(status->dy, 255), -256);
buf[2] = i >> 1;
buf[4] = i - buf[2];
i = imax(imin(status->dz, 127), -128);
buf[5] = (i >> 1) & 0x7f;
buf[6] = (i - (i >> 1)) & 0x7f;
buf[7] = (~status->button >> 3) & 0x7f;
return (MOUSE_SYS_PACKETSIZE);
}
return (pb->inputbytes);
}
static int
psmread(struct cdev *dev, struct uio *uio, int flag)
{
struct psm_softc *sc = dev->si_drv1;
2008-04-08 19:09:45 +00:00
u_char buf[PSM_SMALLBUFSIZE];
int error = 0;
int s;
int l;
if ((sc->state & PSM_VALID) == 0)
return (EIO);
/* block until mouse activity occured */
s = spltty();
while (sc->queue.count <= 0) {
if (dev != sc->bdev) {
2008-04-08 19:09:45 +00:00
splx(s);
return (EWOULDBLOCK);
}
sc->state |= PSM_ASLP;
error = tsleep(sc, PZERO | PCATCH, "psmrea", 0);
sc->state &= ~PSM_ASLP;
if (error) {
splx(s);
return (error);
} else if ((sc->state & PSM_VALID) == 0) {
/* the device disappeared! */
splx(s);
return (EIO);
}
}
splx(s);
/* copy data to the user land */
while ((sc->queue.count > 0) && (uio->uio_resid > 0)) {
s = spltty();
l = imin(sc->queue.count, uio->uio_resid);
if (l > sizeof(buf))
l = sizeof(buf);
if (l > sizeof(sc->queue.buf) - sc->queue.head) {
bcopy(&sc->queue.buf[sc->queue.head], &buf[0],
sizeof(sc->queue.buf) - sc->queue.head);
bcopy(&sc->queue.buf[0],
&buf[sizeof(sc->queue.buf) - sc->queue.head],
l - (sizeof(sc->queue.buf) - sc->queue.head));
} else
bcopy(&sc->queue.buf[sc->queue.head], &buf[0], l);
sc->queue.count -= l;
sc->queue.head = (sc->queue.head + l) % sizeof(sc->queue.buf);
splx(s);
error = uiomove(buf, l, uio);
if (error)
break;
}
2008-04-08 19:09:45 +00:00
return (error);
}
static int
block_mouse_data(struct psm_softc *sc, int *c)
{
2008-04-08 19:09:45 +00:00
int s;
2008-04-08 19:09:45 +00:00
if (!kbdc_lock(sc->kbdc, TRUE))
return (EIO);
2008-04-08 19:09:45 +00:00
s = spltty();
*c = get_controller_command_byte(sc->kbdc);
if ((*c == -1) || !set_controller_command_byte(sc->kbdc,
kbdc_get_device_mask(sc->kbdc),
2008-04-08 19:09:45 +00:00
KBD_DISABLE_KBD_PORT | KBD_DISABLE_KBD_INT |
KBD_ENABLE_AUX_PORT | KBD_DISABLE_AUX_INT)) {
/* this is CONTROLLER ERROR */
splx(s);
kbdc_lock(sc->kbdc, FALSE);
return (EIO);
}
/*
* The device may be in the middle of status data transmission.
* The transmission will be interrupted, thus, incomplete status
* data must be discarded. Although the aux interrupt is disabled
* at the keyboard controller level, at most one aux interrupt
* may have already been pending and a data byte is in the
* output buffer; throw it away. Note that the second argument
* to `empty_aux_buffer()' is zero, so that the call will just
* flush the internal queue.
* `psmintr()' will be invoked after `splx()' if an interrupt is
* pending; it will see no data and returns immediately.
*/
empty_aux_buffer(sc->kbdc, 0); /* flush the queue */
read_aux_data_no_wait(sc->kbdc); /* throw away data if any */
flushpackets(sc);
splx(s);
2008-04-08 19:09:45 +00:00
return (0);
}
Significantly reduce the "jitter" that is typical for PS/2 mice when using a KVM. There is no actual solution possible, but this gets us pretty close. Typically when switching back to a FreeBSD box and moving the mouse wild data is produced, because the protocol's validation/checksum system is extremely weak it is impossible to determine that we're out of sync before dropping several bogus packets to user land. The actual solution that appears to offer the best clamping of jitter is to buffer the mouse packets if we've not seen mouse activity for more than .5 seconds. Then waiting to flush that data for 1/20th of a second. If within that 20th of a second we get any packets that do fail the weak test we drop the entire queue and back off accepting data from the mouse for 2 seconds and then repeat the whole deal. You can still get _some_ jitter, notably if you switch to the FreeBSD box, then move the mouse just enough to generate one or two packets. Those packets may be bogus, but may still pass the validity check. One way to finally kill the problem once and for all is to check the initial packets for "wild" values. Typically one sees packets in the +/-60 range during normal operation, however when bogus data is generated it's typically near the outer range of +/-120 or more, those packets would be a good candidate for dropping or clamping. I've been running with this for several weeks now and it has significantly helped me stay sane even with a piece of junk Belkin KVM causing wild jitter each and every time I switch. Lastly I'd like to note that my experience with Windows shows me that somehow the Microsoft PS/2 driver typically avoids this problem, but that may only be possible when running the mouse in a dumb-ed down PS/2 mode that Belkin recommends on their site.
2003-12-11 11:28:11 +00:00
static void
dropqueue(struct psm_softc *sc)
{
2008-04-08 19:09:45 +00:00
sc->queue.count = 0;
sc->queue.head = 0;
sc->queue.tail = 0;
Significantly reduce the "jitter" that is typical for PS/2 mice when using a KVM. There is no actual solution possible, but this gets us pretty close. Typically when switching back to a FreeBSD box and moving the mouse wild data is produced, because the protocol's validation/checksum system is extremely weak it is impossible to determine that we're out of sync before dropping several bogus packets to user land. The actual solution that appears to offer the best clamping of jitter is to buffer the mouse packets if we've not seen mouse activity for more than .5 seconds. Then waiting to flush that data for 1/20th of a second. If within that 20th of a second we get any packets that do fail the weak test we drop the entire queue and back off accepting data from the mouse for 2 seconds and then repeat the whole deal. You can still get _some_ jitter, notably if you switch to the FreeBSD box, then move the mouse just enough to generate one or two packets. Those packets may be bogus, but may still pass the validity check. One way to finally kill the problem once and for all is to check the initial packets for "wild" values. Typically one sees packets in the +/-60 range during normal operation, however when bogus data is generated it's typically near the outer range of +/-120 or more, those packets would be a good candidate for dropping or clamping. I've been running with this for several weeks now and it has significantly helped me stay sane even with a piece of junk Belkin KVM causing wild jitter each and every time I switch. Lastly I'd like to note that my experience with Windows shows me that somehow the Microsoft PS/2 driver typically avoids this problem, but that may only be possible when running the mouse in a dumb-ed down PS/2 mode that Belkin recommends on their site.
2003-12-11 11:28:11 +00:00
if ((sc->state & PSM_SOFTARMED) != 0) {
sc->state &= ~PSM_SOFTARMED;
callout_stop(&sc->softcallout);
Significantly reduce the "jitter" that is typical for PS/2 mice when using a KVM. There is no actual solution possible, but this gets us pretty close. Typically when switching back to a FreeBSD box and moving the mouse wild data is produced, because the protocol's validation/checksum system is extremely weak it is impossible to determine that we're out of sync before dropping several bogus packets to user land. The actual solution that appears to offer the best clamping of jitter is to buffer the mouse packets if we've not seen mouse activity for more than .5 seconds. Then waiting to flush that data for 1/20th of a second. If within that 20th of a second we get any packets that do fail the weak test we drop the entire queue and back off accepting data from the mouse for 2 seconds and then repeat the whole deal. You can still get _some_ jitter, notably if you switch to the FreeBSD box, then move the mouse just enough to generate one or two packets. Those packets may be bogus, but may still pass the validity check. One way to finally kill the problem once and for all is to check the initial packets for "wild" values. Typically one sees packets in the +/-60 range during normal operation, however when bogus data is generated it's typically near the outer range of +/-120 or more, those packets would be a good candidate for dropping or clamping. I've been running with this for several weeks now and it has significantly helped me stay sane even with a piece of junk Belkin KVM causing wild jitter each and every time I switch. Lastly I'd like to note that my experience with Windows shows me that somehow the Microsoft PS/2 driver typically avoids this problem, but that may only be possible when running the mouse in a dumb-ed down PS/2 mode that Belkin recommends on their site.
2003-12-11 11:28:11 +00:00
}
sc->pqueue_start = sc->pqueue_end;
}
static void
flushpackets(struct psm_softc *sc)
{
dropqueue(sc);
bzero(&sc->pqueue, sizeof(sc->pqueue));
}
static int
unblock_mouse_data(struct psm_softc *sc, int c)
{
2008-04-08 19:09:45 +00:00
int error = 0;
2008-04-08 19:09:45 +00:00
/*
* We may have seen a part of status data during `set_mouse_XXX()'.
* they have been queued; flush it.
*/
empty_aux_buffer(sc->kbdc, 0);
2008-04-08 19:09:45 +00:00
/* restore ports and interrupt */
if (!set_controller_command_byte(sc->kbdc,
kbdc_get_device_mask(sc->kbdc),
c & (KBD_KBD_CONTROL_BITS | KBD_AUX_CONTROL_BITS))) {
2008-04-08 19:09:45 +00:00
/*
* CONTROLLER ERROR; this is serious, we may have
* been left with the inaccessible keyboard and
* the disabled mouse interrupt.
*/
error = EIO;
}
kbdc_lock(sc->kbdc, FALSE);
return (error);
}
static int
psmwrite(struct cdev *dev, struct uio *uio, int flag)
{
struct psm_softc *sc = dev->si_drv1;
2008-04-08 19:09:45 +00:00
u_char buf[PSM_SMALLBUFSIZE];
int error = 0, i, l;
if ((sc->state & PSM_VALID) == 0)
return (EIO);
if (sc->mode.level < PSM_LEVEL_NATIVE)
return (ENODEV);
/* copy data from the user land */
while (uio->uio_resid > 0) {
l = imin(PSM_SMALLBUFSIZE, uio->uio_resid);
error = uiomove(buf, l, uio);
if (error)
break;
for (i = 0; i < l; i++) {
VLOG(4, (LOG_DEBUG, "psm: cmd 0x%x\n", buf[i]));
if (!write_aux_command(sc->kbdc, buf[i])) {
VLOG(2, (LOG_DEBUG,
"psm: cmd 0x%x failed.\n", buf[i]));
return (reinitialize(sc, FALSE));
}
}
}
return (error);
}
static int
2008-04-08 19:09:45 +00:00
psmioctl(struct cdev *dev, u_long cmd, caddr_t addr, int flag,
struct thread *td)
{
struct psm_softc *sc = dev->si_drv1;
2008-04-08 19:09:45 +00:00
mousemode_t mode;
mousestatus_t status;
#if (defined(MOUSE_GETVARS))
2008-04-08 19:09:45 +00:00
mousevar_t *var;
#endif
2008-04-08 19:09:45 +00:00
mousedata_t *data;
int stat[3];
int command_byte;
int error = 0;
int s;
/* Perform IOCTL command */
switch (cmd) {
case OLD_MOUSE_GETHWINFO:
s = spltty();
((old_mousehw_t *)addr)->buttons = sc->hw.buttons;
((old_mousehw_t *)addr)->iftype = sc->hw.iftype;
((old_mousehw_t *)addr)->type = sc->hw.type;
((old_mousehw_t *)addr)->hwid = sc->hw.hwid & 0x00ff;
splx(s);
break;
2008-04-08 19:09:45 +00:00
case MOUSE_GETHWINFO:
s = spltty();
*(mousehw_t *)addr = sc->hw;
if (sc->mode.level == PSM_LEVEL_BASE)
((mousehw_t *)addr)->model = MOUSE_MODEL_GENERIC;
splx(s);
break;
2008-04-08 19:09:45 +00:00
case MOUSE_SYN_GETHWINFO:
s = spltty();
if (sc->synhw.infoMajor >= 4)
2008-04-08 19:09:45 +00:00
*(synapticshw_t *)addr = sc->synhw;
else
error = EINVAL;
splx(s);
break;
2008-04-08 19:09:45 +00:00
case OLD_MOUSE_GETMODE:
s = spltty();
switch (sc->mode.level) {
case PSM_LEVEL_BASE:
((old_mousemode_t *)addr)->protocol = MOUSE_PROTO_PS2;
break;
case PSM_LEVEL_STANDARD:
((old_mousemode_t *)addr)->protocol =
MOUSE_PROTO_SYSMOUSE;
break;
case PSM_LEVEL_NATIVE:
((old_mousemode_t *)addr)->protocol = MOUSE_PROTO_PS2;
break;
}
((old_mousemode_t *)addr)->rate = sc->mode.rate;
((old_mousemode_t *)addr)->resolution = sc->mode.resolution;
((old_mousemode_t *)addr)->accelfactor = sc->mode.accelfactor;
splx(s);
break;
2008-04-08 19:09:45 +00:00
case MOUSE_GETMODE:
s = spltty();
*(mousemode_t *)addr = sc->mode;
if ((sc->flags & PSM_NEED_SYNCBITS) != 0) {
((mousemode_t *)addr)->syncmask[0] = 0;
((mousemode_t *)addr)->syncmask[1] = 0;
}
((mousemode_t *)addr)->resolution =
MOUSE_RES_LOW - sc->mode.resolution;
switch (sc->mode.level) {
case PSM_LEVEL_BASE:
((mousemode_t *)addr)->protocol = MOUSE_PROTO_PS2;
((mousemode_t *)addr)->packetsize =
MOUSE_PS2_PACKETSIZE;
break;
case PSM_LEVEL_STANDARD:
((mousemode_t *)addr)->protocol = MOUSE_PROTO_SYSMOUSE;
((mousemode_t *)addr)->packetsize =
MOUSE_SYS_PACKETSIZE;
((mousemode_t *)addr)->syncmask[0] = MOUSE_SYS_SYNCMASK;
((mousemode_t *)addr)->syncmask[1] = MOUSE_SYS_SYNC;
break;
case PSM_LEVEL_NATIVE:
/* FIXME: this isn't quite correct... XXX */
((mousemode_t *)addr)->protocol = MOUSE_PROTO_PS2;
break;
}
splx(s);
break;
2008-04-08 19:09:45 +00:00
case OLD_MOUSE_SETMODE:
case MOUSE_SETMODE:
if (cmd == OLD_MOUSE_SETMODE) {
mode.rate = ((old_mousemode_t *)addr)->rate;
/*
* resolution old I/F new I/F
* default 0 0
* low 1 -2
* medium low 2 -3
* medium high 3 -4
* high 4 -5
*/
if (((old_mousemode_t *)addr)->resolution > 0)
mode.resolution =
-((old_mousemode_t *)addr)->resolution - 1;
else
mode.resolution = 0;
mode.accelfactor =
((old_mousemode_t *)addr)->accelfactor;
mode.level = -1;
} else
mode = *(mousemode_t *)addr;
/* adjust and validate parameters. */
if (mode.rate > UCHAR_MAX)
return (EINVAL);
if (mode.rate == 0)
mode.rate = sc->dflt_mode.rate;
else if (mode.rate == -1)
/* don't change the current setting */
;
else if (mode.rate < 0)
return (EINVAL);
if (mode.resolution >= UCHAR_MAX)
return (EINVAL);
if (mode.resolution >= 200)
mode.resolution = MOUSE_RES_HIGH;
else if (mode.resolution >= 100)
mode.resolution = MOUSE_RES_MEDIUMHIGH;
else if (mode.resolution >= 50)
mode.resolution = MOUSE_RES_MEDIUMLOW;
else if (mode.resolution > 0)
mode.resolution = MOUSE_RES_LOW;
if (mode.resolution == MOUSE_RES_DEFAULT)
mode.resolution = sc->dflt_mode.resolution;
else if (mode.resolution == -1)
/* don't change the current setting */
;
else if (mode.resolution < 0) /* MOUSE_RES_LOW/MEDIUM/HIGH */
mode.resolution = MOUSE_RES_LOW - mode.resolution;
if (mode.level == -1)
/* don't change the current setting */
mode.level = sc->mode.level;
else if ((mode.level < PSM_LEVEL_MIN) ||
(mode.level > PSM_LEVEL_MAX))
return (EINVAL);
if (mode.accelfactor == -1)
/* don't change the current setting */
mode.accelfactor = sc->mode.accelfactor;
else if (mode.accelfactor < 0)
return (EINVAL);
/* don't allow anybody to poll the keyboard controller */
error = block_mouse_data(sc, &command_byte);
if (error)
return (error);
/* set mouse parameters */
if (mode.rate > 0)
mode.rate = set_mouse_sampling_rate(sc->kbdc,
mode.rate);
if (mode.resolution >= 0)
mode.resolution =
set_mouse_resolution(sc->kbdc, mode.resolution);
set_mouse_scaling(sc->kbdc, 1);
get_mouse_status(sc->kbdc, stat, 0, 3);
s = spltty();
sc->mode.rate = mode.rate;
sc->mode.resolution = mode.resolution;
sc->mode.accelfactor = mode.accelfactor;
sc->mode.level = mode.level;
splx(s);
unblock_mouse_data(sc, command_byte);
break;
2008-04-08 19:09:45 +00:00
case MOUSE_GETLEVEL:
*(int *)addr = sc->mode.level;
break;
case MOUSE_SETLEVEL:
if ((*(int *)addr < PSM_LEVEL_MIN) ||
(*(int *)addr > PSM_LEVEL_MAX))
return (EINVAL);
sc->mode.level = *(int *)addr;
break;
case MOUSE_GETSTATUS:
s = spltty();
status = sc->status;
sc->status.flags = 0;
sc->status.obutton = sc->status.button;
sc->status.button = 0;
sc->status.dx = 0;
sc->status.dy = 0;
sc->status.dz = 0;
splx(s);
*(mousestatus_t *)addr = status;
break;
#if (defined(MOUSE_GETVARS))
2008-04-08 19:09:45 +00:00
case MOUSE_GETVARS:
var = (mousevar_t *)addr;
bzero(var, sizeof(*var));
s = spltty();
var->var[0] = MOUSE_VARS_PS2_SIG;
var->var[1] = sc->config;
var->var[2] = sc->flags;
splx(s);
break;
2008-04-08 19:09:45 +00:00
case MOUSE_SETVARS:
return (ENODEV);
#endif /* MOUSE_GETVARS */
2008-04-08 19:09:45 +00:00
case MOUSE_READSTATE:
case MOUSE_READDATA:
data = (mousedata_t *)addr;
if (data->len > sizeof(data->buf)/sizeof(data->buf[0]))
return (EINVAL);
error = block_mouse_data(sc, &command_byte);
if (error)
return (error);
if ((data->len = get_mouse_status(sc->kbdc, data->buf,
(cmd == MOUSE_READDATA) ? 1 : 0, data->len)) <= 0)
error = EIO;
unblock_mouse_data(sc, command_byte);
break;
#if (defined(MOUSE_SETRESOLUTION))
2008-04-08 19:09:45 +00:00
case MOUSE_SETRESOLUTION:
mode.resolution = *(int *)addr;
if (mode.resolution >= UCHAR_MAX)
return (EINVAL);
else if (mode.resolution >= 200)
mode.resolution = MOUSE_RES_HIGH;
else if (mode.resolution >= 100)
mode.resolution = MOUSE_RES_MEDIUMHIGH;
else if (mode.resolution >= 50)
mode.resolution = MOUSE_RES_MEDIUMLOW;
else if (mode.resolution > 0)
mode.resolution = MOUSE_RES_LOW;
if (mode.resolution == MOUSE_RES_DEFAULT)
mode.resolution = sc->dflt_mode.resolution;
else if (mode.resolution == -1)
mode.resolution = sc->mode.resolution;
else if (mode.resolution < 0) /* MOUSE_RES_LOW/MEDIUM/HIGH */
mode.resolution = MOUSE_RES_LOW - mode.resolution;
error = block_mouse_data(sc, &command_byte);
if (error)
return (error);
sc->mode.resolution =
set_mouse_resolution(sc->kbdc, mode.resolution);
if (sc->mode.resolution != mode.resolution)
error = EIO;
unblock_mouse_data(sc, command_byte);
break;
#endif /* MOUSE_SETRESOLUTION */
#if (defined(MOUSE_SETRATE))
2008-04-08 19:09:45 +00:00
case MOUSE_SETRATE:
mode.rate = *(int *)addr;
if (mode.rate > UCHAR_MAX)
return (EINVAL);
if (mode.rate == 0)
mode.rate = sc->dflt_mode.rate;
else if (mode.rate < 0)
mode.rate = sc->mode.rate;
error = block_mouse_data(sc, &command_byte);
if (error)
return (error);
sc->mode.rate = set_mouse_sampling_rate(sc->kbdc, mode.rate);
if (sc->mode.rate != mode.rate)
error = EIO;
unblock_mouse_data(sc, command_byte);
break;
#endif /* MOUSE_SETRATE */
#if (defined(MOUSE_SETSCALING))
2008-04-08 19:09:45 +00:00
case MOUSE_SETSCALING:
if ((*(int *)addr <= 0) || (*(int *)addr > 2))
return (EINVAL);
error = block_mouse_data(sc, &command_byte);
if (error)
return (error);
if (!set_mouse_scaling(sc->kbdc, *(int *)addr))
error = EIO;
unblock_mouse_data(sc, command_byte);
break;
#endif /* MOUSE_SETSCALING */
#if (defined(MOUSE_GETHWID))
2008-04-08 19:09:45 +00:00
case MOUSE_GETHWID:
error = block_mouse_data(sc, &command_byte);
if (error)
return (error);
sc->hw.hwid &= ~0x00ff;
sc->hw.hwid |= get_aux_id(sc->kbdc);
*(int *)addr = sc->hw.hwid & 0x00ff;
unblock_mouse_data(sc, command_byte);
break;
#endif /* MOUSE_GETHWID */
case FIONBIO:
case FIOASYNC:
break;
case FIOSETOWN:
error = fsetown(*(int *)addr, &sc->async);
break;
case FIOGETOWN:
*(int *) addr = fgetown(&sc->async);
break;
2008-04-08 19:09:45 +00:00
default:
return (ENOTTY);
}
2008-04-08 19:09:45 +00:00
return (error);
}
- Add Support for the following PS/2 mice: - Microsoft IntelliMouse Explorer: 2 buttons on top, 2 side buttons and a wheel which also acts as the middle button. The mouse is recognized as "IntelliMouse Explorer". - Genius NetScroll Optical: 2 buttons on top, 2 side buttons and a wheel which also acts as the middle button. The mouse is recognized as "NetMouse/NetScroll Optical". - MouseSystems SmartScroll Mouse (OEM from Genius?): 3 buttons on top, 1 side button and a wheel. The mouse is recognized as Genius "NetScroll". - IBM ScrollPoint: 2 buttons on top and a stick between the buttons. The stick can perform "horizontal scroll" in W*ndows environment. The horizontal movement of the stick is detected. It is currently mapped to the Z axis movement in the same way as the first wheel. The mouse is recognized as "MouseMan+", as it is considered to be a variation of MouseMan. - A4 Tech 4D and 4D+ mice. These mice have two wheels! The movement of the second wheel is reported as the Z axis movement in the same way as the first wheel. These mice are recognized as "4D Mouse" and "4D+ Mouse". - Tweak IntelliMouse support code a bit so that less-than-compatible wheel mice can work properly with the psm driver. - Add driver configuration flags which correspond to the kernel options PSM_HOOKRESUME and PSM_RESETAFTERSUSPEND, so that we don't need to recompile the kernel when we need these functions. - Properly keep track of the irq resource. - Add a watchdog timer in case interrupts are lost (experimental). - Add `detach' function (experimental).
2000-03-18 15:21:40 +00:00
static void
psmtimeout(void *arg)
{
2008-04-08 19:09:45 +00:00
struct psm_softc *sc;
int s;
sc = (struct psm_softc *)arg;
s = spltty();
if (sc->watchdog && kbdc_lock(sc->kbdc, TRUE)) {
VLOG(4, (LOG_DEBUG, "psm%d: lost interrupt?\n", sc->unit));
psmintr(sc);
kbdc_lock(sc->kbdc, FALSE);
}
sc->watchdog = TRUE;
splx(s);
callout_reset(&sc->callout, hz, psmtimeout, sc);
- Add Support for the following PS/2 mice: - Microsoft IntelliMouse Explorer: 2 buttons on top, 2 side buttons and a wheel which also acts as the middle button. The mouse is recognized as "IntelliMouse Explorer". - Genius NetScroll Optical: 2 buttons on top, 2 side buttons and a wheel which also acts as the middle button. The mouse is recognized as "NetMouse/NetScroll Optical". - MouseSystems SmartScroll Mouse (OEM from Genius?): 3 buttons on top, 1 side button and a wheel. The mouse is recognized as Genius "NetScroll". - IBM ScrollPoint: 2 buttons on top and a stick between the buttons. The stick can perform "horizontal scroll" in W*ndows environment. The horizontal movement of the stick is detected. It is currently mapped to the Z axis movement in the same way as the first wheel. The mouse is recognized as "MouseMan+", as it is considered to be a variation of MouseMan. - A4 Tech 4D and 4D+ mice. These mice have two wheels! The movement of the second wheel is reported as the Z axis movement in the same way as the first wheel. These mice are recognized as "4D Mouse" and "4D+ Mouse". - Tweak IntelliMouse support code a bit so that less-than-compatible wheel mice can work properly with the psm driver. - Add driver configuration flags which correspond to the kernel options PSM_HOOKRESUME and PSM_RESETAFTERSUSPEND, so that we don't need to recompile the kernel when we need these functions. - Properly keep track of the irq resource. - Add a watchdog timer in case interrupts are lost (experimental). - Add `detach' function (experimental).
2000-03-18 15:21:40 +00:00
}
/* Add all sysctls under the debug.psm and hw.psm nodes */
static SYSCTL_NODE(_debug, OID_AUTO, psm, CTLFLAG_RD, 0, "ps/2 mouse");
static SYSCTL_NODE(_hw, OID_AUTO, psm, CTLFLAG_RD, 0, "ps/2 mouse");
Significantly reduce the "jitter" that is typical for PS/2 mice when using a KVM. There is no actual solution possible, but this gets us pretty close. Typically when switching back to a FreeBSD box and moving the mouse wild data is produced, because the protocol's validation/checksum system is extremely weak it is impossible to determine that we're out of sync before dropping several bogus packets to user land. The actual solution that appears to offer the best clamping of jitter is to buffer the mouse packets if we've not seen mouse activity for more than .5 seconds. Then waiting to flush that data for 1/20th of a second. If within that 20th of a second we get any packets that do fail the weak test we drop the entire queue and back off accepting data from the mouse for 2 seconds and then repeat the whole deal. You can still get _some_ jitter, notably if you switch to the FreeBSD box, then move the mouse just enough to generate one or two packets. Those packets may be bogus, but may still pass the validity check. One way to finally kill the problem once and for all is to check the initial packets for "wild" values. Typically one sees packets in the +/-60 range during normal operation, however when bogus data is generated it's typically near the outer range of +/-120 or more, those packets would be a good candidate for dropping or clamping. I've been running with this for several weeks now and it has significantly helped me stay sane even with a piece of junk Belkin KVM causing wild jitter each and every time I switch. Lastly I'd like to note that my experience with Windows shows me that somehow the Microsoft PS/2 driver typically avoids this problem, but that may only be possible when running the mouse in a dumb-ed down PS/2 mode that Belkin recommends on their site.
2003-12-11 11:28:11 +00:00
SYSCTL_INT(_debug_psm, OID_AUTO, loglevel, CTLFLAG_RW, &verbose, 0,
"Verbosity level");
Significantly reduce the "jitter" that is typical for PS/2 mice when using a KVM. There is no actual solution possible, but this gets us pretty close. Typically when switching back to a FreeBSD box and moving the mouse wild data is produced, because the protocol's validation/checksum system is extremely weak it is impossible to determine that we're out of sync before dropping several bogus packets to user land. The actual solution that appears to offer the best clamping of jitter is to buffer the mouse packets if we've not seen mouse activity for more than .5 seconds. Then waiting to flush that data for 1/20th of a second. If within that 20th of a second we get any packets that do fail the weak test we drop the entire queue and back off accepting data from the mouse for 2 seconds and then repeat the whole deal. You can still get _some_ jitter, notably if you switch to the FreeBSD box, then move the mouse just enough to generate one or two packets. Those packets may be bogus, but may still pass the validity check. One way to finally kill the problem once and for all is to check the initial packets for "wild" values. Typically one sees packets in the +/-60 range during normal operation, however when bogus data is generated it's typically near the outer range of +/-120 or more, those packets would be a good candidate for dropping or clamping. I've been running with this for several weeks now and it has significantly helped me stay sane even with a piece of junk Belkin KVM causing wild jitter each and every time I switch. Lastly I'd like to note that my experience with Windows shows me that somehow the Microsoft PS/2 driver typically avoids this problem, but that may only be possible when running the mouse in a dumb-ed down PS/2 mode that Belkin recommends on their site.
2003-12-11 11:28:11 +00:00
static int psmhz = 20;
SYSCTL_INT(_debug_psm, OID_AUTO, hz, CTLFLAG_RW, &psmhz, 0,
"Frequency of the softcallout (in hz)");
Significantly reduce the "jitter" that is typical for PS/2 mice when using a KVM. There is no actual solution possible, but this gets us pretty close. Typically when switching back to a FreeBSD box and moving the mouse wild data is produced, because the protocol's validation/checksum system is extremely weak it is impossible to determine that we're out of sync before dropping several bogus packets to user land. The actual solution that appears to offer the best clamping of jitter is to buffer the mouse packets if we've not seen mouse activity for more than .5 seconds. Then waiting to flush that data for 1/20th of a second. If within that 20th of a second we get any packets that do fail the weak test we drop the entire queue and back off accepting data from the mouse for 2 seconds and then repeat the whole deal. You can still get _some_ jitter, notably if you switch to the FreeBSD box, then move the mouse just enough to generate one or two packets. Those packets may be bogus, but may still pass the validity check. One way to finally kill the problem once and for all is to check the initial packets for "wild" values. Typically one sees packets in the +/-60 range during normal operation, however when bogus data is generated it's typically near the outer range of +/-120 or more, those packets would be a good candidate for dropping or clamping. I've been running with this for several weeks now and it has significantly helped me stay sane even with a piece of junk Belkin KVM causing wild jitter each and every time I switch. Lastly I'd like to note that my experience with Windows shows me that somehow the Microsoft PS/2 driver typically avoids this problem, but that may only be possible when running the mouse in a dumb-ed down PS/2 mode that Belkin recommends on their site.
2003-12-11 11:28:11 +00:00
static int psmerrsecs = 2;
SYSCTL_INT(_debug_psm, OID_AUTO, errsecs, CTLFLAG_RW, &psmerrsecs, 0,
"Number of seconds during which packets will dropped after a sync error");
Significantly reduce the "jitter" that is typical for PS/2 mice when using a KVM. There is no actual solution possible, but this gets us pretty close. Typically when switching back to a FreeBSD box and moving the mouse wild data is produced, because the protocol's validation/checksum system is extremely weak it is impossible to determine that we're out of sync before dropping several bogus packets to user land. The actual solution that appears to offer the best clamping of jitter is to buffer the mouse packets if we've not seen mouse activity for more than .5 seconds. Then waiting to flush that data for 1/20th of a second. If within that 20th of a second we get any packets that do fail the weak test we drop the entire queue and back off accepting data from the mouse for 2 seconds and then repeat the whole deal. You can still get _some_ jitter, notably if you switch to the FreeBSD box, then move the mouse just enough to generate one or two packets. Those packets may be bogus, but may still pass the validity check. One way to finally kill the problem once and for all is to check the initial packets for "wild" values. Typically one sees packets in the +/-60 range during normal operation, however when bogus data is generated it's typically near the outer range of +/-120 or more, those packets would be a good candidate for dropping or clamping. I've been running with this for several weeks now and it has significantly helped me stay sane even with a piece of junk Belkin KVM causing wild jitter each and every time I switch. Lastly I'd like to note that my experience with Windows shows me that somehow the Microsoft PS/2 driver typically avoids this problem, but that may only be possible when running the mouse in a dumb-ed down PS/2 mode that Belkin recommends on their site.
2003-12-11 11:28:11 +00:00
static int psmerrusecs = 0;
SYSCTL_INT(_debug_psm, OID_AUTO, errusecs, CTLFLAG_RW, &psmerrusecs, 0,
"Microseconds to add to psmerrsecs");
Significantly reduce the "jitter" that is typical for PS/2 mice when using a KVM. There is no actual solution possible, but this gets us pretty close. Typically when switching back to a FreeBSD box and moving the mouse wild data is produced, because the protocol's validation/checksum system is extremely weak it is impossible to determine that we're out of sync before dropping several bogus packets to user land. The actual solution that appears to offer the best clamping of jitter is to buffer the mouse packets if we've not seen mouse activity for more than .5 seconds. Then waiting to flush that data for 1/20th of a second. If within that 20th of a second we get any packets that do fail the weak test we drop the entire queue and back off accepting data from the mouse for 2 seconds and then repeat the whole deal. You can still get _some_ jitter, notably if you switch to the FreeBSD box, then move the mouse just enough to generate one or two packets. Those packets may be bogus, but may still pass the validity check. One way to finally kill the problem once and for all is to check the initial packets for "wild" values. Typically one sees packets in the +/-60 range during normal operation, however when bogus data is generated it's typically near the outer range of +/-120 or more, those packets would be a good candidate for dropping or clamping. I've been running with this for several weeks now and it has significantly helped me stay sane even with a piece of junk Belkin KVM causing wild jitter each and every time I switch. Lastly I'd like to note that my experience with Windows shows me that somehow the Microsoft PS/2 driver typically avoids this problem, but that may only be possible when running the mouse in a dumb-ed down PS/2 mode that Belkin recommends on their site.
2003-12-11 11:28:11 +00:00
static int psmsecs = 0;
SYSCTL_INT(_debug_psm, OID_AUTO, secs, CTLFLAG_RW, &psmsecs, 0,
"Max number of seconds between soft interrupts");
Significantly reduce the "jitter" that is typical for PS/2 mice when using a KVM. There is no actual solution possible, but this gets us pretty close. Typically when switching back to a FreeBSD box and moving the mouse wild data is produced, because the protocol's validation/checksum system is extremely weak it is impossible to determine that we're out of sync before dropping several bogus packets to user land. The actual solution that appears to offer the best clamping of jitter is to buffer the mouse packets if we've not seen mouse activity for more than .5 seconds. Then waiting to flush that data for 1/20th of a second. If within that 20th of a second we get any packets that do fail the weak test we drop the entire queue and back off accepting data from the mouse for 2 seconds and then repeat the whole deal. You can still get _some_ jitter, notably if you switch to the FreeBSD box, then move the mouse just enough to generate one or two packets. Those packets may be bogus, but may still pass the validity check. One way to finally kill the problem once and for all is to check the initial packets for "wild" values. Typically one sees packets in the +/-60 range during normal operation, however when bogus data is generated it's typically near the outer range of +/-120 or more, those packets would be a good candidate for dropping or clamping. I've been running with this for several weeks now and it has significantly helped me stay sane even with a piece of junk Belkin KVM causing wild jitter each and every time I switch. Lastly I'd like to note that my experience with Windows shows me that somehow the Microsoft PS/2 driver typically avoids this problem, but that may only be possible when running the mouse in a dumb-ed down PS/2 mode that Belkin recommends on their site.
2003-12-11 11:28:11 +00:00
static int psmusecs = 500000;
SYSCTL_INT(_debug_psm, OID_AUTO, usecs, CTLFLAG_RW, &psmusecs, 0,
"Microseconds to add to psmsecs");
static int pkterrthresh = 2;
SYSCTL_INT(_debug_psm, OID_AUTO, pkterrthresh, CTLFLAG_RW, &pkterrthresh, 0,
"Number of error packets allowed before reinitializing the mouse");
SYSCTL_INT(_hw_psm, OID_AUTO, tap_enabled, CTLFLAG_RW, &tap_enabled, 0,
"Enable tap and drag gestures");
static int tap_threshold = PSM_TAP_THRESHOLD;
SYSCTL_INT(_hw_psm, OID_AUTO, tap_threshold, CTLFLAG_RW, &tap_threshold, 0,
"Button tap threshold");
static int tap_timeout = PSM_TAP_TIMEOUT;
SYSCTL_INT(_hw_psm, OID_AUTO, tap_timeout, CTLFLAG_RW, &tap_timeout, 0,
"Tap timeout for touchpads");
static void
psmintr(void *arg)
{
2008-04-08 19:09:45 +00:00
struct psm_softc *sc = arg;
struct timeval now;
int c;
packetbuf_t *pb;
/* read until there is nothing to read */
while((c = read_aux_data_no_wait(sc->kbdc)) != -1) {
pb = &sc->pqueue[sc->pqueue_end];
/* discard the byte if the device is not open */
if ((sc->state & PSM_OPEN) == 0)
continue;
getmicrouptime(&now);
if ((pb->inputbytes > 0) &&
timevalcmp(&now, &sc->inputtimeout, >)) {
VLOG(3, (LOG_DEBUG, "psmintr: delay too long; "
"resetting byte count\n"));
pb->inputbytes = 0;
sc->syncerrors = 0;
sc->pkterrors = 0;
}
sc->inputtimeout.tv_sec = PSM_INPUT_TIMEOUT / 1000000;
sc->inputtimeout.tv_usec = PSM_INPUT_TIMEOUT % 1000000;
timevaladd(&sc->inputtimeout, &now);
2008-04-08 19:09:45 +00:00
pb->ipacket[pb->inputbytes++] = c;
2008-04-08 19:09:45 +00:00
if (sc->mode.level == PSM_LEVEL_NATIVE) {
VLOG(4, (LOG_DEBUG, "psmintr: %02x\n", pb->ipacket[0]));
sc->syncerrors = 0;
sc->pkterrors = 0;
goto next;
} else {
if (pb->inputbytes < sc->mode.packetsize)
continue;
2008-04-08 19:09:45 +00:00
VLOG(4, (LOG_DEBUG,
"psmintr: %02x %02x %02x %02x %02x %02x\n",
pb->ipacket[0], pb->ipacket[1], pb->ipacket[2],
pb->ipacket[3], pb->ipacket[4], pb->ipacket[5]));
}
c = pb->ipacket[0];
if ((sc->flags & PSM_NEED_SYNCBITS) != 0) {
sc->mode.syncmask[1] = (c & sc->mode.syncmask[0]);
sc->flags &= ~PSM_NEED_SYNCBITS;
VLOG(2, (LOG_DEBUG,
"psmintr: Sync bytes now %04x,%04x\n",
sc->mode.syncmask[0], sc->mode.syncmask[0]));
} else if ((c & sc->mode.syncmask[0]) != sc->mode.syncmask[1]) {
VLOG(3, (LOG_DEBUG, "psmintr: out of sync "
"(%04x != %04x) %d cmds since last error.\n",
c & sc->mode.syncmask[0], sc->mode.syncmask[1],
sc->cmdcount - sc->lasterr));
sc->lasterr = sc->cmdcount;
/*
* The sync byte test is a weak measure of packet
* validity. Conservatively discard any input yet
* to be seen by userland when we detect a sync
* error since there is a good chance some of
* the queued packets have undetected errors.
*/
dropqueue(sc);
if (sc->syncerrors == 0)
sc->pkterrors++;
++sc->syncerrors;
sc->lastinputerr = now;
if (sc->syncerrors >= sc->mode.packetsize * 2 ||
sc->pkterrors >= pkterrthresh) {
/*
* If we've failed to find a single sync byte
* in 2 packets worth of data, or we've seen
* persistent packet errors during the
* validation period, reinitialize the mouse
* in hopes of returning it to the expected
* mode.
*/
VLOG(3, (LOG_DEBUG,
"psmintr: reset the mouse.\n"));
reinitialize(sc, TRUE);
} else if (sc->syncerrors == sc->mode.packetsize) {
/*
* Try a soft reset after searching for a sync
* byte through a packet length of bytes.
*/
VLOG(3, (LOG_DEBUG,
"psmintr: re-enable the mouse.\n"));
pb->inputbytes = 0;
disable_aux_dev(sc->kbdc);
enable_aux_dev(sc->kbdc);
} else {
VLOG(3, (LOG_DEBUG,
"psmintr: discard a byte (%d)\n",
sc->syncerrors));
pb->inputbytes--;
bcopy(&pb->ipacket[1], &pb->ipacket[0],
pb->inputbytes);
}
continue;
}
/*
2008-04-08 19:09:45 +00:00
* We have what appears to be a valid packet.
* Reset the error counters.
*/
2008-04-08 19:09:45 +00:00
sc->syncerrors = 0;
/*
2008-04-08 19:09:45 +00:00
* Drop even good packets if they occur within a timeout
* period of a sync error. This allows the detection of
* a change in the mouse's packet mode without exposing
* erratic mouse behavior to the user. Some KVMs forget
* enhanced mouse modes during switch events.
*/
2008-04-08 19:09:45 +00:00
if (!timeelapsed(&sc->lastinputerr, psmerrsecs, psmerrusecs,
&now)) {
pb->inputbytes = 0;
continue;
}
Significantly reduce the "jitter" that is typical for PS/2 mice when using a KVM. There is no actual solution possible, but this gets us pretty close. Typically when switching back to a FreeBSD box and moving the mouse wild data is produced, because the protocol's validation/checksum system is extremely weak it is impossible to determine that we're out of sync before dropping several bogus packets to user land. The actual solution that appears to offer the best clamping of jitter is to buffer the mouse packets if we've not seen mouse activity for more than .5 seconds. Then waiting to flush that data for 1/20th of a second. If within that 20th of a second we get any packets that do fail the weak test we drop the entire queue and back off accepting data from the mouse for 2 seconds and then repeat the whole deal. You can still get _some_ jitter, notably if you switch to the FreeBSD box, then move the mouse just enough to generate one or two packets. Those packets may be bogus, but may still pass the validity check. One way to finally kill the problem once and for all is to check the initial packets for "wild" values. Typically one sees packets in the +/-60 range during normal operation, however when bogus data is generated it's typically near the outer range of +/-120 or more, those packets would be a good candidate for dropping or clamping. I've been running with this for several weeks now and it has significantly helped me stay sane even with a piece of junk Belkin KVM causing wild jitter each and every time I switch. Lastly I'd like to note that my experience with Windows shows me that somehow the Microsoft PS/2 driver typically avoids this problem, but that may only be possible when running the mouse in a dumb-ed down PS/2 mode that Belkin recommends on their site.
2003-12-11 11:28:11 +00:00
2008-04-08 19:09:45 +00:00
/*
* Now that we're out of the validation period, reset
* the packet error count.
*/
sc->pkterrors = 0;
2008-04-08 19:09:45 +00:00
sc->cmdcount++;
next:
if (++sc->pqueue_end >= PSM_PACKETQUEUE)
sc->pqueue_end = 0;
/*
* If we've filled the queue then call the softintr ourselves,
* otherwise schedule the interrupt for later.
*/
if (!timeelapsed(&sc->lastsoftintr, psmsecs, psmusecs, &now) ||
(sc->pqueue_end == sc->pqueue_start)) {
if ((sc->state & PSM_SOFTARMED) != 0) {
sc->state &= ~PSM_SOFTARMED;
callout_stop(&sc->softcallout);
2008-04-08 19:09:45 +00:00
}
psmsoftintr(arg);
} else if ((sc->state & PSM_SOFTARMED) == 0) {
sc->state |= PSM_SOFTARMED;
callout_reset(&sc->softcallout,
psmhz < 1 ? 1 : (hz/psmhz), psmsoftintr, arg);
Significantly reduce the "jitter" that is typical for PS/2 mice when using a KVM. There is no actual solution possible, but this gets us pretty close. Typically when switching back to a FreeBSD box and moving the mouse wild data is produced, because the protocol's validation/checksum system is extremely weak it is impossible to determine that we're out of sync before dropping several bogus packets to user land. The actual solution that appears to offer the best clamping of jitter is to buffer the mouse packets if we've not seen mouse activity for more than .5 seconds. Then waiting to flush that data for 1/20th of a second. If within that 20th of a second we get any packets that do fail the weak test we drop the entire queue and back off accepting data from the mouse for 2 seconds and then repeat the whole deal. You can still get _some_ jitter, notably if you switch to the FreeBSD box, then move the mouse just enough to generate one or two packets. Those packets may be bogus, but may still pass the validity check. One way to finally kill the problem once and for all is to check the initial packets for "wild" values. Typically one sees packets in the +/-60 range during normal operation, however when bogus data is generated it's typically near the outer range of +/-120 or more, those packets would be a good candidate for dropping or clamping. I've been running with this for several weeks now and it has significantly helped me stay sane even with a piece of junk Belkin KVM causing wild jitter each and every time I switch. Lastly I'd like to note that my experience with Windows shows me that somehow the Microsoft PS/2 driver typically avoids this problem, but that may only be possible when running the mouse in a dumb-ed down PS/2 mode that Belkin recommends on their site.
2003-12-11 11:28:11 +00:00
}
}
}
static void
2008-04-08 19:09:45 +00:00
proc_mmanplus(struct psm_softc *sc, packetbuf_t *pb, mousestatus_t *ms,
int *x, int *y, int *z)
Significantly reduce the "jitter" that is typical for PS/2 mice when using a KVM. There is no actual solution possible, but this gets us pretty close. Typically when switching back to a FreeBSD box and moving the mouse wild data is produced, because the protocol's validation/checksum system is extremely weak it is impossible to determine that we're out of sync before dropping several bogus packets to user land. The actual solution that appears to offer the best clamping of jitter is to buffer the mouse packets if we've not seen mouse activity for more than .5 seconds. Then waiting to flush that data for 1/20th of a second. If within that 20th of a second we get any packets that do fail the weak test we drop the entire queue and back off accepting data from the mouse for 2 seconds and then repeat the whole deal. You can still get _some_ jitter, notably if you switch to the FreeBSD box, then move the mouse just enough to generate one or two packets. Those packets may be bogus, but may still pass the validity check. One way to finally kill the problem once and for all is to check the initial packets for "wild" values. Typically one sees packets in the +/-60 range during normal operation, however when bogus data is generated it's typically near the outer range of +/-120 or more, those packets would be a good candidate for dropping or clamping. I've been running with this for several weeks now and it has significantly helped me stay sane even with a piece of junk Belkin KVM causing wild jitter each and every time I switch. Lastly I'd like to note that my experience with Windows shows me that somehow the Microsoft PS/2 driver typically avoids this problem, but that may only be possible when running the mouse in a dumb-ed down PS/2 mode that Belkin recommends on their site.
2003-12-11 11:28:11 +00:00
{
2008-04-08 19:09:45 +00:00
/*
2012-09-20 10:07:31 +00:00
* PS2++ protocol packet
2008-04-08 19:09:45 +00:00
*
* b7 b6 b5 b4 b3 b2 b1 b0
* byte 1: * 1 p3 p2 1 * * *
* byte 2: c1 c2 p1 p0 d1 d0 1 0
*
* p3-p0: packet type
* c1, c2: c1 & c2 == 1, if p2 == 0
* c1 & c2 == 0, if p2 == 1
*
* packet type: 0 (device type)
* See comments in enable_mmanplus() below.
*
* packet type: 1 (wheel data)
*
* b7 b6 b5 b4 b3 b2 b1 b0
* byte 3: h * B5 B4 s d2 d1 d0
*
* h: 1, if horizontal roller data
* 0, if vertical roller data
* B4, B5: button 4 and 5
* s: sign bit
* d2-d0: roller data
*
* packet type: 2 (reserved)
*/
2008-04-08 19:09:45 +00:00
if (((pb->ipacket[0] & MOUSE_PS2PLUS_SYNCMASK) == MOUSE_PS2PLUS_SYNC) &&
(abs(*x) > 191) && MOUSE_PS2PLUS_CHECKBITS(pb->ipacket)) {
/*
* the extended data packet encodes button
* and wheel events
*/
Significantly reduce the "jitter" that is typical for PS/2 mice when using a KVM. There is no actual solution possible, but this gets us pretty close. Typically when switching back to a FreeBSD box and moving the mouse wild data is produced, because the protocol's validation/checksum system is extremely weak it is impossible to determine that we're out of sync before dropping several bogus packets to user land. The actual solution that appears to offer the best clamping of jitter is to buffer the mouse packets if we've not seen mouse activity for more than .5 seconds. Then waiting to flush that data for 1/20th of a second. If within that 20th of a second we get any packets that do fail the weak test we drop the entire queue and back off accepting data from the mouse for 2 seconds and then repeat the whole deal. You can still get _some_ jitter, notably if you switch to the FreeBSD box, then move the mouse just enough to generate one or two packets. Those packets may be bogus, but may still pass the validity check. One way to finally kill the problem once and for all is to check the initial packets for "wild" values. Typically one sees packets in the +/-60 range during normal operation, however when bogus data is generated it's typically near the outer range of +/-120 or more, those packets would be a good candidate for dropping or clamping. I've been running with this for several weeks now and it has significantly helped me stay sane even with a piece of junk Belkin KVM causing wild jitter each and every time I switch. Lastly I'd like to note that my experience with Windows shows me that somehow the Microsoft PS/2 driver typically avoids this problem, but that may only be possible when running the mouse in a dumb-ed down PS/2 mode that Belkin recommends on their site.
2003-12-11 11:28:11 +00:00
switch (MOUSE_PS2PLUS_PACKET_TYPE(pb->ipacket)) {
case 1:
2008-04-08 19:09:45 +00:00
/* wheel data packet */
*x = *y = 0;
if (pb->ipacket[2] & 0x80) {
/* XXX horizontal roller count - ignore it */
;
} else {
/* vertical roller count */
*z = (pb->ipacket[2] & MOUSE_PS2PLUS_ZNEG) ?
(pb->ipacket[2] & 0x0f) - 16 :
(pb->ipacket[2] & 0x0f);
}
ms->button |= (pb->ipacket[2] &
MOUSE_PS2PLUS_BUTTON4DOWN) ?
MOUSE_BUTTON4DOWN : 0;
ms->button |= (pb->ipacket[2] &
MOUSE_PS2PLUS_BUTTON5DOWN) ?
MOUSE_BUTTON5DOWN : 0;
break;
case 2:
2008-04-08 19:09:45 +00:00
/*
* this packet type is reserved by
* Logitech...
*/
/*
* IBM ScrollPoint Mouse uses this
* packet type to encode both vertical
* and horizontal scroll movement.
*/
*x = *y = 0;
/* horizontal count */
if (pb->ipacket[2] & 0x0f)
*z = (pb->ipacket[2] & MOUSE_SPOINT_WNEG) ?
-2 : 2;
/* vertical count */
if (pb->ipacket[2] & 0xf0)
*z = (pb->ipacket[2] & MOUSE_SPOINT_ZNEG) ?
-1 : 1;
break;
case 0:
2008-04-08 19:09:45 +00:00
/* device type packet - shouldn't happen */
/* FALLTHROUGH */
default:
2008-04-08 19:09:45 +00:00
*x = *y = 0;
ms->button = ms->obutton;
VLOG(1, (LOG_DEBUG, "psmintr: unknown PS2++ packet "
"type %d: 0x%02x 0x%02x 0x%02x\n",
MOUSE_PS2PLUS_PACKET_TYPE(pb->ipacket),
pb->ipacket[0], pb->ipacket[1], pb->ipacket[2]));
break;
}
2008-04-08 19:09:45 +00:00
} else {
/* preserve button states */
2008-04-08 19:09:45 +00:00
ms->button |= ms->obutton & MOUSE_EXTBUTTONS;
}
}
- Add Support for the following PS/2 mice: - Microsoft IntelliMouse Explorer: 2 buttons on top, 2 side buttons and a wheel which also acts as the middle button. The mouse is recognized as "IntelliMouse Explorer". - Genius NetScroll Optical: 2 buttons on top, 2 side buttons and a wheel which also acts as the middle button. The mouse is recognized as "NetMouse/NetScroll Optical". - MouseSystems SmartScroll Mouse (OEM from Genius?): 3 buttons on top, 1 side button and a wheel. The mouse is recognized as Genius "NetScroll". - IBM ScrollPoint: 2 buttons on top and a stick between the buttons. The stick can perform "horizontal scroll" in W*ndows environment. The horizontal movement of the stick is detected. It is currently mapped to the Z axis movement in the same way as the first wheel. The mouse is recognized as "MouseMan+", as it is considered to be a variation of MouseMan. - A4 Tech 4D and 4D+ mice. These mice have two wheels! The movement of the second wheel is reported as the Z axis movement in the same way as the first wheel. These mice are recognized as "4D Mouse" and "4D+ Mouse". - Tweak IntelliMouse support code a bit so that less-than-compatible wheel mice can work properly with the psm driver. - Add driver configuration flags which correspond to the kernel options PSM_HOOKRESUME and PSM_RESETAFTERSUSPEND, so that we don't need to recompile the kernel when we need these functions. - Properly keep track of the irq resource. - Add a watchdog timer in case interrupts are lost (experimental). - Add `detach' function (experimental).
2000-03-18 15:21:40 +00:00
2008-04-08 19:09:45 +00:00
static int
proc_synaptics(struct psm_softc *sc, packetbuf_t *pb, mousestatus_t *ms,
int *x, int *y, int *z)
{
static int touchpad_buttons;
static int guest_buttons;
int w, x0, y0;
2008-04-08 19:09:45 +00:00
/* TouchPad PS/2 absolute mode message format with capFourButtons:
2008-04-08 19:09:45 +00:00
*
* Bits: 7 6 5 4 3 2 1 0 (LSB)
* ------------------------------------------------
* ipacket[0]: 1 0 W3 W2 0 W1 R L
* ipacket[1]: Yb Ya Y9 Y8 Xb Xa X9 X8
* ipacket[2]: Z7 Z6 Z5 Z4 Z3 Z2 Z1 Z0
* ipacket[3]: 1 1 Yc Xc 0 W0 D^R U^L
2008-04-08 19:09:45 +00:00
* ipacket[4]: X7 X6 X5 X4 X3 X2 X1 X0
* ipacket[5]: Y7 Y6 Y5 Y4 Y3 Y2 Y1 Y0
*
* Legend:
* L: left physical mouse button
* R: right physical mouse button
* D: down button
* U: up button
* W: "wrist" value
* X: x position
* Y: y position
2008-04-08 19:09:45 +00:00
* Z: pressure
*
* Without capFourButtons but with nExtendeButtons and/or capMiddle
*
* Bits: 7 6 5 4 3 2 1 0 (LSB)
* ------------------------------------------------------
* ipacket[3]: 1 1 Yc Xc 0 W0 E^R M^L
* ipacket[4]: X7 X6 X5 X4 X3|b7 X2|b5 X1|b3 X0|b1
* ipacket[5]: Y7 Y6 Y5 Y4 Y3|b8 Y2|b6 Y1|b4 Y0|b2
*
* Legend:
* M: Middle physical mouse button
* E: Extended mouse buttons reported instead of low bits of X and Y
* b1-b8: Extended mouse buttons
* Only ((nExtendedButtons + 1) >> 1) bits are used in packet
* 4 and 5, for reading X and Y value they should be zeroed.
*
2008-04-08 19:09:45 +00:00
* Absolute reportable limits: 0 - 6143.
* Typical bezel limits: 1472 - 5472.
* Typical edge marings: 1632 - 5312.
*
* w = 3 Passthrough Packet
*
* Byte 2,5,6 == Byte 1,2,3 of "Guest"
*/
2008-04-08 19:09:45 +00:00
if (!synaptics_support)
return (0);
2008-04-08 19:09:45 +00:00
/* Sanity check for out of sync packets. */
if ((pb->ipacket[0] & 0xc8) != 0x80 ||
(pb->ipacket[3] & 0xc8) != 0xc0)
return (-1);
*x = *y = 0;
/*
* Pressure value.
* Interpretation:
* z = 0 No finger contact
* z = 10 Finger hovering near the pad
* z = 30 Very light finger contact
* z = 80 Normal finger contact
* z = 110 Very heavy finger contact
* z = 200 Finger lying flat on pad surface
* z = 255 Maximum reportable Z
*/
2008-04-08 19:09:45 +00:00
*z = pb->ipacket[2];
/*
* Finger width value
* Interpretation:
* w = 0 Two finger on the pad (capMultiFinger needed)
* w = 1 Three or more fingers (capMultiFinger needed)
* w = 2 Pen (instead of finger) (capPen needed)
* w = 3 Reserved (passthrough?)
* w = 4-7 Finger of normal width (capPalmDetect needed)
* w = 8-14 Very wide finger or palm (capPalmDetect needed)
* w = 15 Maximum reportable width (capPalmDetect needed)
*/
/* XXX Is checking capExtended enough? */
2008-04-08 19:09:45 +00:00
if (sc->synhw.capExtended)
w = ((pb->ipacket[0] & 0x30) >> 2) |
((pb->ipacket[0] & 0x04) >> 1) |
((pb->ipacket[3] & 0x04) >> 2);
2008-04-08 19:09:45 +00:00
else {
/* Assume a finger of regular width. */
w = 4;
2008-04-08 19:09:45 +00:00
}
/*
* Handle packets from the guest device. See:
* Synaptics PS/2 TouchPad Interfacing Guide, Section 5.1
*/
2008-04-08 19:09:45 +00:00
if (w == 3 && sc->synhw.capPassthrough) {
*x = ((pb->ipacket[1] & 0x10) ?
pb->ipacket[4] - 256 : pb->ipacket[4]);
2008-04-08 19:09:45 +00:00
*y = ((pb->ipacket[1] & 0x20) ?
pb->ipacket[5] - 256 : pb->ipacket[5]);
2008-04-08 19:09:45 +00:00
*z = 0;
guest_buttons = 0;
if (pb->ipacket[1] & 0x01)
2008-04-08 19:09:45 +00:00
guest_buttons |= MOUSE_BUTTON1DOWN;
if (pb->ipacket[1] & 0x04)
2008-04-08 19:09:45 +00:00
guest_buttons |= MOUSE_BUTTON2DOWN;
if (pb->ipacket[1] & 0x02)
2008-04-08 19:09:45 +00:00
guest_buttons |= MOUSE_BUTTON3DOWN;
2008-04-08 19:09:45 +00:00
ms->button = touchpad_buttons | guest_buttons;
goto SYNAPTICS_END;
2008-04-08 19:09:45 +00:00
}
2008-04-08 19:09:45 +00:00
/* Button presses */
touchpad_buttons = 0;
if (pb->ipacket[0] & 0x01)
touchpad_buttons |= MOUSE_BUTTON1DOWN;
if (pb->ipacket[0] & 0x02)
touchpad_buttons |= MOUSE_BUTTON3DOWN;
2008-04-08 19:09:45 +00:00
if (sc->synhw.capExtended && sc->synhw.capFourButtons) {
if ((pb->ipacket[3] ^ pb->ipacket[0]) & 0x01)
touchpad_buttons |= MOUSE_BUTTON4DOWN;
if ((pb->ipacket[3] ^ pb->ipacket[0]) & 0x02)
touchpad_buttons |= MOUSE_BUTTON5DOWN;
} else if (sc->synhw.capExtended && sc->synhw.capMiddle) {
/* Middle Button */
if ((pb->ipacket[0] ^ pb->ipacket[3]) & 0x01)
touchpad_buttons |= MOUSE_BUTTON2DOWN;
} else if (sc->synhw.capExtended && (sc->synhw.nExtendedButtons > 0)) {
/* Extended Buttons */
if ((pb->ipacket[0] ^ pb->ipacket[3]) & 0x02) {
if (sc->syninfo.directional_scrolls) {
if (pb->ipacket[4] & 0x01)
touchpad_buttons |= MOUSE_BUTTON4DOWN;
if (pb->ipacket[5] & 0x01)
touchpad_buttons |= MOUSE_BUTTON5DOWN;
if (pb->ipacket[4] & 0x02)
touchpad_buttons |= MOUSE_BUTTON6DOWN;
if (pb->ipacket[5] & 0x02)
touchpad_buttons |= MOUSE_BUTTON7DOWN;
} else {
2008-04-08 19:09:45 +00:00
touchpad_buttons |= MOUSE_BUTTON2DOWN;
}
/*
* Zero out bits used by extended buttons to avoid
* misinterpretation of the data absolute position.
*
* The bits represented by
*
* (nExtendedButtons + 1) >> 1
*
* will be masked out in both bytes.
* The mask for n bits is computed with the formula
*
* (1 << n) - 1
*/
int maskedbits = 0;
int mask = 0;
maskedbits = (sc->synhw.nExtendedButtons + 1) >> 1;
mask = (1 << maskedbits) - 1;
pb->ipacket[4] &= ~(mask);
pb->ipacket[5] &= ~(mask);
}
2008-04-08 19:09:45 +00:00
}
2008-04-08 19:09:45 +00:00
ms->button = touchpad_buttons | guest_buttons;
/* Check pressure to detect a real wanted action on the
* touchpad. */
if (*z >= sc->syninfo.min_pressure) {
synapticsaction_t *synaction;
int cursor, peer, window;
int dx, dy, dxp, dyp;
int max_width, max_pressure;
int margin_top, margin_right, margin_bottom, margin_left;
int na_top, na_right, na_bottom, na_left;
int window_min, window_max;
int multiplicator;
int weight_current, weight_previous, weight_len_squared;
int div_min, div_max, div_len;
int vscroll_hor_area, vscroll_ver_area;
int len, weight_prev_x, weight_prev_y;
int div_max_x, div_max_y, div_x, div_y;
/* Read sysctl. */
/* XXX Verify values? */
max_width = sc->syninfo.max_width;
max_pressure = sc->syninfo.max_pressure;
margin_top = sc->syninfo.margin_top;
margin_right = sc->syninfo.margin_right;
margin_bottom = sc->syninfo.margin_bottom;
margin_left = sc->syninfo.margin_left;
na_top = sc->syninfo.na_top;
na_right = sc->syninfo.na_right;
na_bottom = sc->syninfo.na_bottom;
na_left = sc->syninfo.na_left;
window_min = sc->syninfo.window_min;
window_max = sc->syninfo.window_max;
multiplicator = sc->syninfo.multiplicator;
weight_current = sc->syninfo.weight_current;
weight_previous = sc->syninfo.weight_previous;
weight_len_squared = sc->syninfo.weight_len_squared;
div_min = sc->syninfo.div_min;
div_max = sc->syninfo.div_max;
div_len = sc->syninfo.div_len;
vscroll_hor_area = sc->syninfo.vscroll_hor_area;
vscroll_ver_area = sc->syninfo.vscroll_ver_area;
/* Palm detection. */
if (!(
(sc->synhw.capMultiFinger && (w == 0 || w == 1)) ||
(sc->synhw.capPalmDetect && w >= 4 && w <= max_width) ||
(!sc->synhw.capPalmDetect && *z <= max_pressure) ||
(sc->synhw.capPen && w == 2))) {
/*
* We consider the packet irrelevant for the current
* action when:
* - the width isn't comprised in:
* [4; max_width]
* - the pressure isn't comprised in:
* [min_pressure; max_pressure]
* - pen aren't supported but w is 2
*
* Note that this doesn't terminate the current action.
*/
VLOG(2, (LOG_DEBUG,
"synaptics: palm detected! (%d)\n", w));
goto SYNAPTICS_END;
}
/* Read current absolute position. */
x0 = ((pb->ipacket[3] & 0x10) << 8) |
((pb->ipacket[1] & 0x0f) << 8) |
pb->ipacket[4];
y0 = ((pb->ipacket[3] & 0x20) << 7) |
((pb->ipacket[1] & 0xf0) << 4) |
pb->ipacket[5];
2008-04-08 19:09:45 +00:00
synaction = &(sc->synaction);
2008-04-08 19:09:45 +00:00
/*
* If the action is just beginning, init the structure and
* compute tap timeout.
*/
if (!(sc->flags & PSM_FLAGS_FINGERDOWN)) {
VLOG(3, (LOG_DEBUG, "synaptics: ----\n"));
2008-04-08 19:09:45 +00:00
/* Store the first point of this action. */
synaction->start_x = x0;
synaction->start_y = y0;
dx = dy = 0;
2008-04-08 19:09:45 +00:00
/* Initialize queue. */
synaction->queue_cursor = SYNAPTICS_PACKETQUEUE;
synaction->queue_len = 0;
synaction->window_min = window_min;
/* Reset average. */
synaction->avg_dx = 0;
synaction->avg_dy = 0;
2008-04-08 19:09:45 +00:00
/* Reset squelch. */
synaction->squelch_x = 0;
synaction->squelch_y = 0;
/* Reset pressure peak. */
sc->zmax = 0;
/* Reset fingers count. */
synaction->fingers_nb = 0;
2008-04-08 19:09:45 +00:00
/* Reset virtual scrolling state. */
synaction->in_vscroll = 0;
2008-04-08 19:09:45 +00:00
/* Compute tap timeout. */
sc->taptimeout.tv_sec = tap_timeout / 1000000;
sc->taptimeout.tv_usec = tap_timeout % 1000000;
timevaladd(&sc->taptimeout, &sc->lastsoftintr);
sc->flags |= PSM_FLAGS_FINGERDOWN;
} else {
/* Calculate the current delta. */
cursor = synaction->queue_cursor;
dx = x0 - synaction->queue[cursor].x;
dy = y0 - synaction->queue[cursor].y;
}
/* If in tap-hold, add the recorded button. */
if (synaction->in_taphold)
ms->button |= synaction->tap_button;
/*
* From now on, we can use the SYNAPTICS_END label to skip
* the current packet.
*/
/*
* Limit the coordinates to the specified margins because
* this area isn't very reliable.
*/
if (x0 <= margin_left)
x0 = margin_left;
else if (x0 >= 6143 - margin_right)
x0 = 6143 - margin_right;
if (y0 <= margin_bottom)
y0 = margin_bottom;
else if (y0 >= 6143 - margin_top)
y0 = 6143 - margin_top;
VLOG(3, (LOG_DEBUG, "synaptics: ipacket: [%d, %d], %d, %d\n",
x0, y0, *z, w));
/* Queue this new packet. */
cursor = SYNAPTICS_QUEUE_CURSOR(synaction->queue_cursor - 1);
synaction->queue[cursor].x = x0;
synaction->queue[cursor].y = y0;
synaction->queue_cursor = cursor;
if (synaction->queue_len < SYNAPTICS_PACKETQUEUE)
synaction->queue_len++;
VLOG(5, (LOG_DEBUG,
"synaptics: cursor[%d]: x=%d, y=%d, dx=%d, dy=%d\n",
cursor, x0, y0, dx, dy));
/*
* For tap, we keep the maximum number of fingers and the
* pressure peak. Also with multiple fingers, we increase
* the minimum window.
*/
switch (w) {
case 1: /* Three or more fingers. */
synaction->fingers_nb = imax(3, synaction->fingers_nb);
synaction->window_min = window_max;
break;
case 0: /* Two fingers. */
synaction->fingers_nb = imax(2, synaction->fingers_nb);
synaction->window_min = window_max;
break;
default: /* One finger or undetectable. */
synaction->fingers_nb = imax(1, synaction->fingers_nb);
}
sc->zmax = imax(*z, sc->zmax);
/* Do we have enough packets to consider this a movement? */
if (synaction->queue_len < synaction->window_min)
goto SYNAPTICS_END;
/* Is a scrolling action occuring? */
if (!synaction->in_taphold && !synaction->in_vscroll) {
2008-04-08 19:09:45 +00:00
/*
* A scrolling action must not conflict with a tap
* action. Here are the conditions to consider a
* scrolling action:
* - the action in a configurable area
* - one of the following:
* . the distance between the last packet and the
* first should be above a configurable minimum
* . tap timed out
2008-04-08 19:09:45 +00:00
*/
dxp = abs(synaction->queue[synaction->queue_cursor].x -
synaction->start_x);
dyp = abs(synaction->queue[synaction->queue_cursor].y -
synaction->start_y);
if (timevalcmp(&sc->lastsoftintr, &sc->taptimeout, >) ||
dxp >= sc->syninfo.vscroll_min_delta ||
dyp >= sc->syninfo.vscroll_min_delta) {
/* Check for horizontal scrolling. */
if ((vscroll_hor_area > 0 &&
synaction->start_y <= vscroll_hor_area) ||
(vscroll_hor_area < 0 &&
synaction->start_y >=
6143 + vscroll_hor_area))
synaction->in_vscroll += 2;
/* Check for vertical scrolling. */
if ((vscroll_ver_area > 0 &&
synaction->start_x <= vscroll_ver_area) ||
(vscroll_ver_area < 0 &&
synaction->start_x >=
6143 + vscroll_ver_area))
synaction->in_vscroll += 1;
/* Avoid conflicts if area overlaps. */
if (synaction->in_vscroll == 3)
synaction->in_vscroll =
(dxp > dyp) ? 2 : 1;
}
VLOG(5, (LOG_DEBUG,
"synaptics: virtual scrolling: %s "
"(direction=%d, dxp=%d, dyp=%d)\n",
synaction->in_vscroll ? "YES" : "NO",
synaction->in_vscroll, dxp, dyp));
}
weight_prev_x = weight_prev_y = weight_previous;
div_max_x = div_max_y = div_max;
if (synaction->in_vscroll) {
/* Dividers are different with virtual scrolling. */
div_min = sc->syninfo.vscroll_div_min;
div_max_x = div_max_y = sc->syninfo.vscroll_div_max;
} else {
2008-04-08 19:09:45 +00:00
/*
* There's a lot of noise in coordinates when
* the finger is on the touchpad's borders. When
* using this area, we apply a special weight and
* div.
2008-04-08 19:09:45 +00:00
*/
if (x0 <= na_left || x0 >= 6143 - na_right) {
weight_prev_x = sc->syninfo.weight_previous_na;
div_max_x = sc->syninfo.div_max_na;
}
2008-04-08 19:09:45 +00:00
if (y0 <= na_bottom || y0 >= 6143 - na_top) {
weight_prev_y = sc->syninfo.weight_previous_na;
div_max_y = sc->syninfo.div_max_na;
2008-04-08 19:09:45 +00:00
}
}
2008-04-08 19:09:45 +00:00
/*
* Calculate weights for the average operands and
* the divisor. Both depend on the distance between
* the current packet and a previous one (based on the
* window width).
*/
window = imin(synaction->queue_len, window_max);
peer = SYNAPTICS_QUEUE_CURSOR(cursor + window - 1);
dxp = abs(x0 - synaction->queue[peer].x) + 1;
dyp = abs(y0 - synaction->queue[peer].y) + 1;
len = (dxp * dxp) + (dyp * dyp);
weight_prev_x = imin(weight_prev_x,
weight_len_squared * weight_prev_x / len);
weight_prev_y = imin(weight_prev_y,
weight_len_squared * weight_prev_y / len);
len = (dxp + dyp) / 2;
div_x = div_len * div_max_x / len;
div_x = imin(div_max_x, div_x);
div_x = imax(div_min, div_x);
div_y = div_len * div_max_y / len;
div_y = imin(div_max_y, div_y);
div_y = imax(div_min, div_y);
VLOG(3, (LOG_DEBUG,
"synaptics: peer=%d, len=%d, weight=%d/%d, div=%d/%d\n",
peer, len, weight_prev_x, weight_prev_y, div_x, div_y));
/* Compute averages. */
synaction->avg_dx =
(weight_current * dx * multiplicator +
weight_prev_x * synaction->avg_dx) /
(weight_current + weight_prev_x);
synaction->avg_dy =
(weight_current * dy * multiplicator +
weight_prev_y * synaction->avg_dy) /
(weight_current + weight_prev_y);
VLOG(5, (LOG_DEBUG,
"synaptics: avg_dx~=%d, avg_dy~=%d\n",
synaction->avg_dx / multiplicator,
synaction->avg_dy / multiplicator));
/* Use these averages to calculate x & y. */
synaction->squelch_x += synaction->avg_dx;
*x = synaction->squelch_x / (div_x * multiplicator);
synaction->squelch_x = synaction->squelch_x %
(div_x * multiplicator);
synaction->squelch_y += synaction->avg_dy;
*y = synaction->squelch_y / (div_y * multiplicator);
synaction->squelch_y = synaction->squelch_y %
(div_y * multiplicator);
if (synaction->in_vscroll) {
switch(synaction->in_vscroll) {
case 1: /* Vertical scrolling. */
if (*y != 0)
ms->button |= (*y > 0) ?
MOUSE_BUTTON4DOWN :
MOUSE_BUTTON5DOWN;
break;
case 2: /* Horizontal scrolling. */
if (*x != 0)
ms->button |= (*x > 0) ?
MOUSE_BUTTON7DOWN :
MOUSE_BUTTON6DOWN;
break;
}
/* The pointer is not moved. */
*x = *y = 0;
} else {
VLOG(3, (LOG_DEBUG, "synaptics: [%d, %d] -> [%d, %d]\n",
dx, dy, *x, *y));
}
} else if (sc->flags & PSM_FLAGS_FINGERDOWN) {
/*
* An action is currently taking place but the pressure
* dropped under the minimum, putting an end to it.
*/
synapticsaction_t *synaction;
int taphold_timeout, dx, dy, tap_max_delta;
synaction = &(sc->synaction);
dx = abs(synaction->queue[synaction->queue_cursor].x -
synaction->start_x);
dy = abs(synaction->queue[synaction->queue_cursor].y -
synaction->start_y);
/* Max delta is disabled for multi-fingers tap. */
if (synaction->fingers_nb > 1)
tap_max_delta = imax(dx, dy);
else
tap_max_delta = sc->syninfo.tap_max_delta;
sc->flags &= ~PSM_FLAGS_FINGERDOWN;
/* Check for tap. */
VLOG(3, (LOG_DEBUG,
"synaptics: zmax=%d, dx=%d, dy=%d, "
"delta=%d, fingers=%d, queue=%d\n",
sc->zmax, dx, dy, tap_max_delta, synaction->fingers_nb,
synaction->queue_len));
if (!synaction->in_vscroll && sc->zmax >= tap_threshold &&
timevalcmp(&sc->lastsoftintr, &sc->taptimeout, <=) &&
dx <= tap_max_delta && dy <= tap_max_delta &&
synaction->queue_len >= sc->syninfo.tap_min_queue) {
/*
* We have a tap if:
* - the maximum pressure went over tap_threshold
* - the action ended before tap_timeout
*
* To handle tap-hold, we must delay any button push to
* the next action.
*/
if (synaction->in_taphold) {
/*
* This is the second and last tap of a
* double tap action, not a tap-hold.
*/
synaction->in_taphold = 0;
/*
* For double-tap to work:
* - no button press is emitted (to
* simulate a button release)
* - PSM_FLAGS_FINGERDOWN is set to
* force the next packet to emit a
* button press)
*/
VLOG(2, (LOG_DEBUG,
"synaptics: button RELEASE: %d\n",
synaction->tap_button));
sc->flags |= PSM_FLAGS_FINGERDOWN;
} else {
/*
* This is the first tap: we set the
* tap-hold state and notify the button
* down event.
*/
synaction->in_taphold = 1;
taphold_timeout = sc->syninfo.taphold_timeout;
sc->taptimeout.tv_sec = taphold_timeout /
1000000;
sc->taptimeout.tv_usec = taphold_timeout %
1000000;
timevaladd(&sc->taptimeout, &sc->lastsoftintr);
switch (synaction->fingers_nb) {
case 3:
synaction->tap_button =
MOUSE_BUTTON2DOWN;
break;
case 2:
synaction->tap_button =
MOUSE_BUTTON3DOWN;
break;
default:
synaction->tap_button =
MOUSE_BUTTON1DOWN;
}
VLOG(2, (LOG_DEBUG,
"synaptics: button PRESS: %d\n",
synaction->tap_button));
ms->button |= synaction->tap_button;
}
} else {
/*
* Not enough pressure or timeout: reset
* tap-hold state.
*/
if (synaction->in_taphold) {
VLOG(2, (LOG_DEBUG,
"synaptics: button RELEASE: %d\n",
synaction->tap_button));
synaction->in_taphold = 0;
} else {
VLOG(2, (LOG_DEBUG,
"synaptics: not a tap-hold\n"));
}
}
} else if (!(sc->flags & PSM_FLAGS_FINGERDOWN) &&
sc->synaction.in_taphold) {
/*
* For a tap-hold to work, the button must remain down at
* least until timeout (where the in_taphold flags will be
* cleared) or during the next action.
*/
if (timevalcmp(&sc->lastsoftintr, &sc->taptimeout, <=)) {
ms->button |= sc->synaction.tap_button;
} else {
VLOG(2, (LOG_DEBUG,
"synaptics: button RELEASE: %d\n",
sc->synaction.tap_button));
sc->synaction.in_taphold = 0;
}
2008-04-08 19:09:45 +00:00
}
SYNAPTICS_END:
/*
* Use the extra buttons as a scrollwheel
*
* XXX X.Org uses the Z axis for vertical wheel only,
* whereas moused(8) understands special values to differ
* vertical and horizontal wheels.
*
* xf86-input-mouse needs therefore a small patch to
* understand these special values. Without it, the
* horizontal wheel acts as a vertical wheel in X.Org.
*
* That's why the horizontal wheel is disabled by
* default for now.
*/
if (ms->button & MOUSE_BUTTON4DOWN) {
2008-04-08 19:09:45 +00:00
*z = -1;
ms->button &= ~MOUSE_BUTTON4DOWN;
} else if (ms->button & MOUSE_BUTTON5DOWN) {
2008-04-08 19:09:45 +00:00
*z = 1;
ms->button &= ~MOUSE_BUTTON5DOWN;
} else if (ms->button & MOUSE_BUTTON6DOWN) {
*z = -2;
ms->button &= ~MOUSE_BUTTON6DOWN;
} else if (ms->button & MOUSE_BUTTON7DOWN) {
*z = 2;
ms->button &= ~MOUSE_BUTTON7DOWN;
} else
2008-04-08 19:09:45 +00:00
*z = 0;
return (0);
}
static void
proc_versapad(struct psm_softc *sc, packetbuf_t *pb, mousestatus_t *ms,
int *x, int *y, int *z)
{
static int butmap_versapad[8] = {
0,
MOUSE_BUTTON3DOWN,
0,
MOUSE_BUTTON3DOWN,
MOUSE_BUTTON1DOWN,
MOUSE_BUTTON1DOWN | MOUSE_BUTTON3DOWN,
MOUSE_BUTTON1DOWN,
MOUSE_BUTTON1DOWN | MOUSE_BUTTON3DOWN
};
int c, x0, y0;
/* VersaPad PS/2 absolute mode message format
*
* [packet1] 7 6 5 4 3 2 1 0(LSB)
* ipacket[0]: 1 1 0 A 1 L T R
* ipacket[1]: H7 H6 H5 H4 H3 H2 H1 H0
* ipacket[2]: V7 V6 V5 V4 V3 V2 V1 V0
* ipacket[3]: 1 1 1 A 1 L T R
* ipacket[4]:V11 V10 V9 V8 H11 H10 H9 H8
* ipacket[5]: 0 P6 P5 P4 P3 P2 P1 P0
*
* [note]
* R: right physical mouse button (1=on)
* T: touch pad virtual button (1=tapping)
* L: left physical mouse button (1=on)
* A: position data is valid (1=valid)
* H: horizontal data (12bit signed integer. H11 is sign bit.)
* V: vertical data (12bit signed integer. V11 is sign bit.)
* P: pressure data
*
* Tapping is mapped to MOUSE_BUTTON4.
*/
c = pb->ipacket[0];
*x = *y = 0;
ms->button = butmap_versapad[c & MOUSE_PS2VERSA_BUTTONS];
ms->button |= (c & MOUSE_PS2VERSA_TAP) ? MOUSE_BUTTON4DOWN : 0;
if (c & MOUSE_PS2VERSA_IN_USE) {
x0 = pb->ipacket[1] | (((pb->ipacket[4]) & 0x0f) << 8);
y0 = pb->ipacket[2] | (((pb->ipacket[4]) & 0xf0) << 4);
if (x0 & 0x800)
x0 -= 0x1000;
if (y0 & 0x800)
y0 -= 0x1000;
if (sc->flags & PSM_FLAGS_FINGERDOWN) {
*x = sc->xold - x0;
*y = y0 - sc->yold;
if (*x < 0) /* XXX */
++*x;
else if (*x)
--*x;
if (*y < 0)
++*y;
else if (*y)
--*y;
} else
sc->flags |= PSM_FLAGS_FINGERDOWN;
sc->xold = x0;
sc->yold = y0;
} else
sc->flags &= ~PSM_FLAGS_FINGERDOWN;
}
static void
psmsoftintr(void *arg)
{
/*
* the table to turn PS/2 mouse button bits (MOUSE_PS2_BUTTON?DOWN)
* into `mousestatus' button bits (MOUSE_BUTTON?DOWN).
*/
static int butmap[8] = {
0,
MOUSE_BUTTON1DOWN,
MOUSE_BUTTON3DOWN,
MOUSE_BUTTON1DOWN | MOUSE_BUTTON3DOWN,
MOUSE_BUTTON2DOWN,
MOUSE_BUTTON1DOWN | MOUSE_BUTTON2DOWN,
MOUSE_BUTTON2DOWN | MOUSE_BUTTON3DOWN,
MOUSE_BUTTON1DOWN | MOUSE_BUTTON2DOWN | MOUSE_BUTTON3DOWN
};
struct psm_softc *sc = arg;
2008-04-08 19:09:45 +00:00
mousestatus_t ms;
packetbuf_t *pb;
int x, y, z, c, l, s;
getmicrouptime(&sc->lastsoftintr);
s = spltty();
do {
pb = &sc->pqueue[sc->pqueue_start];
if (sc->mode.level == PSM_LEVEL_NATIVE)
goto next_native;
c = pb->ipacket[0];
/*
* A kludge for Kensington device!
* The MSB of the horizontal count appears to be stored in
* a strange place.
*/
if (sc->hw.model == MOUSE_MODEL_THINK)
pb->ipacket[1] |= (c & MOUSE_PS2_XOVERFLOW) ? 0x80 : 0;
/* ignore the overflow bits... */
x = (c & MOUSE_PS2_XNEG) ?
pb->ipacket[1] - 256 : pb->ipacket[1];
y = (c & MOUSE_PS2_YNEG) ?
pb->ipacket[2] - 256 : pb->ipacket[2];
z = 0;
2008-04-08 19:09:45 +00:00
ms.obutton = sc->button; /* previous button state */
ms.button = butmap[c & MOUSE_PS2_BUTTONS];
/* `tapping' action */
if (sc->config & PSM_CONFIG_FORCETAP)
ms.button |= ((c & MOUSE_PS2_TAP)) ?
0 : MOUSE_BUTTON4DOWN;
switch (sc->hw.model) {
case MOUSE_MODEL_EXPLORER:
/*
* b7 b6 b5 b4 b3 b2 b1 b0
* byte 1: oy ox sy sx 1 M R L
* byte 2: x x x x x x x x
* byte 3: y y y y y y y y
* byte 4: * * S2 S1 s d2 d1 d0
*
* L, M, R, S1, S2: left, middle, right and side buttons
* s: wheel data sign bit
* d2-d0: wheel data
*/
z = (pb->ipacket[3] & MOUSE_EXPLORER_ZNEG) ?
(pb->ipacket[3] & 0x0f) - 16 :
(pb->ipacket[3] & 0x0f);
ms.button |=
(pb->ipacket[3] & MOUSE_EXPLORER_BUTTON4DOWN) ?
MOUSE_BUTTON4DOWN : 0;
ms.button |=
(pb->ipacket[3] & MOUSE_EXPLORER_BUTTON5DOWN) ?
MOUSE_BUTTON5DOWN : 0;
break;
case MOUSE_MODEL_INTELLI:
case MOUSE_MODEL_NET:
/* wheel data is in the fourth byte */
z = (char)pb->ipacket[3];
/*
* XXX some mice may send 7 when there is no Z movement? */
if ((z >= 7) || (z <= -7))
z = 0;
/* some compatible mice have additional buttons */
ms.button |= (c & MOUSE_PS2INTELLI_BUTTON4DOWN) ?
MOUSE_BUTTON4DOWN : 0;
ms.button |= (c & MOUSE_PS2INTELLI_BUTTON5DOWN) ?
MOUSE_BUTTON5DOWN : 0;
break;
case MOUSE_MODEL_MOUSEMANPLUS:
proc_mmanplus(sc, pb, &ms, &x, &y, &z);
break;
case MOUSE_MODEL_GLIDEPOINT:
/* `tapping' action */
ms.button |= ((c & MOUSE_PS2_TAP)) ? 0 :
MOUSE_BUTTON4DOWN;
break;
case MOUSE_MODEL_NETSCROLL:
/*
* three addtional bytes encode buttons and
* wheel events
*/
ms.button |= (pb->ipacket[3] & MOUSE_PS2_BUTTON3DOWN) ?
MOUSE_BUTTON4DOWN : 0;
ms.button |= (pb->ipacket[3] & MOUSE_PS2_BUTTON1DOWN) ?
MOUSE_BUTTON5DOWN : 0;
z = (pb->ipacket[3] & MOUSE_PS2_XNEG) ?
pb->ipacket[4] - 256 : pb->ipacket[4];
break;
case MOUSE_MODEL_THINK:
/* the fourth button state in the first byte */
ms.button |= (c & MOUSE_PS2_TAP) ?
MOUSE_BUTTON4DOWN : 0;
break;
case MOUSE_MODEL_VERSAPAD:
proc_versapad(sc, pb, &ms, &x, &y, &z);
c = ((x < 0) ? MOUSE_PS2_XNEG : 0) |
((y < 0) ? MOUSE_PS2_YNEG : 0);
break;
case MOUSE_MODEL_4D:
/*
* b7 b6 b5 b4 b3 b2 b1 b0
* byte 1: s2 d2 s1 d1 1 M R L
* byte 2: sx x x x x x x x
* byte 3: sy y y y y y y y
*
* s1: wheel 1 direction
* d1: wheel 1 data
* s2: wheel 2 direction
* d2: wheel 2 data
*/
x = (pb->ipacket[1] & 0x80) ?
pb->ipacket[1] - 256 : pb->ipacket[1];
y = (pb->ipacket[2] & 0x80) ?
pb->ipacket[2] - 256 : pb->ipacket[2];
switch (c & MOUSE_4D_WHEELBITS) {
case 0x10:
z = 1;
break;
case 0x30:
z = -1;
break;
case 0x40: /* XXX 2nd wheel turning right */
z = 2;
break;
case 0xc0: /* XXX 2nd wheel turning left */
z = -2;
break;
}
break;
case MOUSE_MODEL_4DPLUS:
if ((x < 16 - 256) && (y < 16 - 256)) {
/*
* b7 b6 b5 b4 b3 b2 b1 b0
* byte 1: 0 0 1 1 1 M R L
* byte 2: 0 0 0 0 1 0 0 0
* byte 3: 0 0 0 0 S s d1 d0
*
* L, M, R, S: left, middle, right,
* and side buttons
* s: wheel data sign bit
* d1-d0: wheel data
*/
x = y = 0;
if (pb->ipacket[2] & MOUSE_4DPLUS_BUTTON4DOWN)
ms.button |= MOUSE_BUTTON4DOWN;
z = (pb->ipacket[2] & MOUSE_4DPLUS_ZNEG) ?
((pb->ipacket[2] & 0x07) - 8) :
(pb->ipacket[2] & 0x07) ;
} else {
/* preserve previous button states */
ms.button |= ms.obutton & MOUSE_EXTBUTTONS;
}
break;
case MOUSE_MODEL_SYNAPTICS:
if (proc_synaptics(sc, pb, &ms, &x, &y, &z) != 0)
goto next;
break;
case MOUSE_MODEL_TRACKPOINT:
2008-04-08 19:09:45 +00:00
case MOUSE_MODEL_GENERIC:
default:
break;
}
2008-04-08 19:09:45 +00:00
/* scale values */
if (sc->mode.accelfactor >= 1) {
if (x != 0) {
x = x * x / sc->mode.accelfactor;
if (x == 0)
x = 1;
if (c & MOUSE_PS2_XNEG)
x = -x;
}
if (y != 0) {
y = y * y / sc->mode.accelfactor;
if (y == 0)
y = 1;
if (c & MOUSE_PS2_YNEG)
y = -y;
}
}
2008-04-08 19:09:45 +00:00
ms.dx = x;
ms.dy = y;
ms.dz = z;
ms.flags = ((x || y || z) ? MOUSE_POSCHANGED : 0) |
(ms.obutton ^ ms.button);
pb->inputbytes = tame_mouse(sc, pb, &ms, pb->ipacket);
2008-04-08 19:09:45 +00:00
sc->status.flags |= ms.flags;
sc->status.dx += ms.dx;
sc->status.dy += ms.dy;
sc->status.dz += ms.dz;
sc->status.button = ms.button;
sc->button = ms.button;
2008-04-08 19:09:45 +00:00
next_native:
- Add Support for the following PS/2 mice: - Microsoft IntelliMouse Explorer: 2 buttons on top, 2 side buttons and a wheel which also acts as the middle button. The mouse is recognized as "IntelliMouse Explorer". - Genius NetScroll Optical: 2 buttons on top, 2 side buttons and a wheel which also acts as the middle button. The mouse is recognized as "NetMouse/NetScroll Optical". - MouseSystems SmartScroll Mouse (OEM from Genius?): 3 buttons on top, 1 side button and a wheel. The mouse is recognized as Genius "NetScroll". - IBM ScrollPoint: 2 buttons on top and a stick between the buttons. The stick can perform "horizontal scroll" in W*ndows environment. The horizontal movement of the stick is detected. It is currently mapped to the Z axis movement in the same way as the first wheel. The mouse is recognized as "MouseMan+", as it is considered to be a variation of MouseMan. - A4 Tech 4D and 4D+ mice. These mice have two wheels! The movement of the second wheel is reported as the Z axis movement in the same way as the first wheel. These mice are recognized as "4D Mouse" and "4D+ Mouse". - Tweak IntelliMouse support code a bit so that less-than-compatible wheel mice can work properly with the psm driver. - Add driver configuration flags which correspond to the kernel options PSM_HOOKRESUME and PSM_RESETAFTERSUSPEND, so that we don't need to recompile the kernel when we need these functions. - Properly keep track of the irq resource. - Add a watchdog timer in case interrupts are lost (experimental). - Add `detach' function (experimental).
2000-03-18 15:21:40 +00:00
sc->watchdog = FALSE;
2008-04-08 19:09:45 +00:00
/* queue data */
if (sc->queue.count + pb->inputbytes < sizeof(sc->queue.buf)) {
l = imin(pb->inputbytes,
sizeof(sc->queue.buf) - sc->queue.tail);
bcopy(&pb->ipacket[0], &sc->queue.buf[sc->queue.tail], l);
if (pb->inputbytes > l)
bcopy(&pb->ipacket[l], &sc->queue.buf[0],
pb->inputbytes - l);
sc->queue.tail = (sc->queue.tail + pb->inputbytes) %
sizeof(sc->queue.buf);
sc->queue.count += pb->inputbytes;
}
2008-04-08 19:09:45 +00:00
pb->inputbytes = 0;
2008-04-08 19:09:45 +00:00
next:
Significantly reduce the "jitter" that is typical for PS/2 mice when using a KVM. There is no actual solution possible, but this gets us pretty close. Typically when switching back to a FreeBSD box and moving the mouse wild data is produced, because the protocol's validation/checksum system is extremely weak it is impossible to determine that we're out of sync before dropping several bogus packets to user land. The actual solution that appears to offer the best clamping of jitter is to buffer the mouse packets if we've not seen mouse activity for more than .5 seconds. Then waiting to flush that data for 1/20th of a second. If within that 20th of a second we get any packets that do fail the weak test we drop the entire queue and back off accepting data from the mouse for 2 seconds and then repeat the whole deal. You can still get _some_ jitter, notably if you switch to the FreeBSD box, then move the mouse just enough to generate one or two packets. Those packets may be bogus, but may still pass the validity check. One way to finally kill the problem once and for all is to check the initial packets for "wild" values. Typically one sees packets in the +/-60 range during normal operation, however when bogus data is generated it's typically near the outer range of +/-120 or more, those packets would be a good candidate for dropping or clamping. I've been running with this for several weeks now and it has significantly helped me stay sane even with a piece of junk Belkin KVM causing wild jitter each and every time I switch. Lastly I'd like to note that my experience with Windows shows me that somehow the Microsoft PS/2 driver typically avoids this problem, but that may only be possible when running the mouse in a dumb-ed down PS/2 mode that Belkin recommends on their site.
2003-12-11 11:28:11 +00:00
if (++sc->pqueue_start >= PSM_PACKETQUEUE)
sc->pqueue_start = 0;
2008-04-08 19:09:45 +00:00
} while (sc->pqueue_start != sc->pqueue_end);
if (sc->state & PSM_ASLP) {
sc->state &= ~PSM_ASLP;
wakeup(sc);
}
selwakeuppri(&sc->rsel, PZERO);
if (sc->async != NULL) {
pgsigio(&sc->async, SIGIO, 0);
}
2008-04-08 19:09:45 +00:00
sc->state &= ~PSM_SOFTARMED;
splx(s);
}
static int
psmpoll(struct cdev *dev, int events, struct thread *td)
{
struct psm_softc *sc = dev->si_drv1;
2008-04-08 19:09:45 +00:00
int s;
int revents = 0;
/* Return true if a mouse event available */
s = spltty();
if (events & (POLLIN | POLLRDNORM)) {
if (sc->queue.count > 0)
revents |= events & (POLLIN | POLLRDNORM);
else
selrecord(td, &sc->rsel);
}
splx(s);
2008-04-08 19:09:45 +00:00
return (revents);
}
/* vendor/model specific routines */
static int mouse_id_proc1(KBDC kbdc, int res, int scale, int *status)
{
2008-04-08 19:09:45 +00:00
if (set_mouse_resolution(kbdc, res) != res)
return (FALSE);
if (set_mouse_scaling(kbdc, scale) &&
set_mouse_scaling(kbdc, scale) &&
set_mouse_scaling(kbdc, scale) &&
(get_mouse_status(kbdc, status, 0, 3) >= 3))
return (TRUE);
return (FALSE);
}
2008-04-08 19:09:45 +00:00
static int
mouse_ext_command(KBDC kbdc, int command)
{
2008-04-08 19:09:45 +00:00
int c;
c = (command >> 6) & 0x03;
if (set_mouse_resolution(kbdc, c) != c)
return (FALSE);
c = (command >> 4) & 0x03;
if (set_mouse_resolution(kbdc, c) != c)
return (FALSE);
c = (command >> 2) & 0x03;
if (set_mouse_resolution(kbdc, c) != c)
return (FALSE);
c = (command >> 0) & 0x03;
if (set_mouse_resolution(kbdc, c) != c)
return (FALSE);
return (TRUE);
}
2005-12-04 02:12:43 +00:00
#ifdef notyet
/* Logitech MouseMan Cordless II */
static int
enable_lcordless(KDBC kbdc, struct psm_softc *sc)
{
2008-04-08 19:09:45 +00:00
int status[3];
int ch;
if (!mouse_id_proc1(kbdc, PSMD_RES_HIGH, 2, status))
2008-04-08 19:09:45 +00:00
return (FALSE);
if (status[1] == PSMD_RES_HIGH)
return (FALSE);
ch = (status[0] & 0x07) - 1; /* channel # */
if ((ch <= 0) || (ch > 4))
return (FALSE);
/*
* status[1]: always one?
* status[2]: battery status? (0-100)
*/
return (TRUE);
}
#endif /* notyet */
- Add Support for the following PS/2 mice: - Microsoft IntelliMouse Explorer: 2 buttons on top, 2 side buttons and a wheel which also acts as the middle button. The mouse is recognized as "IntelliMouse Explorer". - Genius NetScroll Optical: 2 buttons on top, 2 side buttons and a wheel which also acts as the middle button. The mouse is recognized as "NetMouse/NetScroll Optical". - MouseSystems SmartScroll Mouse (OEM from Genius?): 3 buttons on top, 1 side button and a wheel. The mouse is recognized as Genius "NetScroll". - IBM ScrollPoint: 2 buttons on top and a stick between the buttons. The stick can perform "horizontal scroll" in W*ndows environment. The horizontal movement of the stick is detected. It is currently mapped to the Z axis movement in the same way as the first wheel. The mouse is recognized as "MouseMan+", as it is considered to be a variation of MouseMan. - A4 Tech 4D and 4D+ mice. These mice have two wheels! The movement of the second wheel is reported as the Z axis movement in the same way as the first wheel. These mice are recognized as "4D Mouse" and "4D+ Mouse". - Tweak IntelliMouse support code a bit so that less-than-compatible wheel mice can work properly with the psm driver. - Add driver configuration flags which correspond to the kernel options PSM_HOOKRESUME and PSM_RESETAFTERSUSPEND, so that we don't need to recompile the kernel when we need these functions. - Properly keep track of the irq resource. - Add a watchdog timer in case interrupts are lost (experimental). - Add `detach' function (experimental).
2000-03-18 15:21:40 +00:00
/* Genius NetScroll Mouse, MouseSystems SmartScroll Mouse */
static int
enable_groller(KBDC kbdc, struct psm_softc *sc)
{
2008-04-08 19:09:45 +00:00
int status[3];
/*
* The special sequence to enable the fourth button and the
* roller. Immediately after this sequence check status bytes.
* if the mouse is NetScroll, the second and the third bytes are
* '3' and 'D'.
*/
/*
* If the mouse is an ordinary PS/2 mouse, the status bytes should
* look like the following.
*
* byte 1 bit 7 always 0
* bit 6 stream mode (0)
* bit 5 disabled (0)
* bit 4 1:1 scaling (0)
* bit 3 always 0
* bit 0-2 button status
* byte 2 resolution (PSMD_RES_HIGH)
* byte 3 report rate (?)
*/
if (!mouse_id_proc1(kbdc, PSMD_RES_HIGH, 1, status))
2008-04-08 19:09:45 +00:00
return (FALSE);
if ((status[1] != '3') || (status[2] != 'D'))
return (FALSE);
/* FIXME: SmartScroll Mouse has 5 buttons! XXX */
if (sc != NULL)
sc->hw.buttons = 4;
2008-04-08 19:09:45 +00:00
return (TRUE);
}
- Add Support for the following PS/2 mice: - Microsoft IntelliMouse Explorer: 2 buttons on top, 2 side buttons and a wheel which also acts as the middle button. The mouse is recognized as "IntelliMouse Explorer". - Genius NetScroll Optical: 2 buttons on top, 2 side buttons and a wheel which also acts as the middle button. The mouse is recognized as "NetMouse/NetScroll Optical". - MouseSystems SmartScroll Mouse (OEM from Genius?): 3 buttons on top, 1 side button and a wheel. The mouse is recognized as Genius "NetScroll". - IBM ScrollPoint: 2 buttons on top and a stick between the buttons. The stick can perform "horizontal scroll" in W*ndows environment. The horizontal movement of the stick is detected. It is currently mapped to the Z axis movement in the same way as the first wheel. The mouse is recognized as "MouseMan+", as it is considered to be a variation of MouseMan. - A4 Tech 4D and 4D+ mice. These mice have two wheels! The movement of the second wheel is reported as the Z axis movement in the same way as the first wheel. These mice are recognized as "4D Mouse" and "4D+ Mouse". - Tweak IntelliMouse support code a bit so that less-than-compatible wheel mice can work properly with the psm driver. - Add driver configuration flags which correspond to the kernel options PSM_HOOKRESUME and PSM_RESETAFTERSUSPEND, so that we don't need to recompile the kernel when we need these functions. - Properly keep track of the irq resource. - Add a watchdog timer in case interrupts are lost (experimental). - Add `detach' function (experimental).
2000-03-18 15:21:40 +00:00
/* Genius NetMouse/NetMouse Pro, ASCII Mie Mouse, NetScroll Optical */
static int
enable_gmouse(KBDC kbdc, struct psm_softc *sc)
{
2008-04-08 19:09:45 +00:00
int status[3];
/*
* The special sequence to enable the middle, "rubber" button.
* Immediately after this sequence check status bytes.
* if the mouse is NetMouse, NetMouse Pro, or ASCII MIE Mouse,
* the second and the third bytes are '3' and 'U'.
* NOTE: NetMouse reports that it has three buttons although it has
* two buttons and a rubber button. NetMouse Pro and MIE Mouse
* say they have three buttons too and they do have a button on the
* side...
*/
if (!mouse_id_proc1(kbdc, PSMD_RES_HIGH, 1, status))
2008-04-08 19:09:45 +00:00
return (FALSE);
if ((status[1] != '3') || (status[2] != 'U'))
return (FALSE);
return (TRUE);
}
/* ALPS GlidePoint */
static int
enable_aglide(KBDC kbdc, struct psm_softc *sc)
{
2008-04-08 19:09:45 +00:00
int status[3];
/*
* The special sequence to obtain ALPS GlidePoint specific
* information. Immediately after this sequence, status bytes will
* contain something interesting.
* NOTE: ALPS produces several models of GlidePoint. Some of those
* do not respond to this sequence, thus, cannot be detected this way.
*/
if (set_mouse_sampling_rate(kbdc, 100) != 100)
2008-04-08 19:09:45 +00:00
return (FALSE);
if (!mouse_id_proc1(kbdc, PSMD_RES_LOW, 2, status))
2008-04-08 19:09:45 +00:00
return (FALSE);
if ((status[1] == PSMD_RES_LOW) || (status[2] == 100))
return (FALSE);
return (TRUE);
}
/* Kensington ThinkingMouse/Trackball */
static int
enable_kmouse(KBDC kbdc, struct psm_softc *sc)
{
2008-04-08 19:09:45 +00:00
static u_char rate[] = { 20, 60, 40, 20, 20, 60, 40, 20, 20 };
int status[3];
int id1;
int id2;
int i;
id1 = get_aux_id(kbdc);
if (set_mouse_sampling_rate(kbdc, 10) != 10)
return (FALSE);
/*
* The device is now in the native mode? It returns a different
* ID value...
*/
id2 = get_aux_id(kbdc);
if ((id1 == id2) || (id2 != 2))
return (FALSE);
if (set_mouse_resolution(kbdc, PSMD_RES_LOW) != PSMD_RES_LOW)
return (FALSE);
#if PSM_DEBUG >= 2
2008-04-08 19:09:45 +00:00
/* at this point, resolution is LOW, sampling rate is 10/sec */
if (get_mouse_status(kbdc, status, 0, 3) < 3)
return (FALSE);
#endif
2008-04-08 19:09:45 +00:00
/*
* The special sequence to enable the third and fourth buttons.
* Otherwise they behave like the first and second buttons.
*/
for (i = 0; i < sizeof(rate)/sizeof(rate[0]); ++i)
if (set_mouse_sampling_rate(kbdc, rate[i]) != rate[i])
return (FALSE);
/*
* At this point, the device is using default resolution and
* sampling rate for the native mode.
*/
if (get_mouse_status(kbdc, status, 0, 3) < 3)
return (FALSE);
if ((status[1] == PSMD_RES_LOW) || (status[2] == rate[i - 1]))
return (FALSE);
/* the device appears be enabled by this sequence, diable it for now */
disable_aux_dev(kbdc);
empty_aux_buffer(kbdc, 5);
return (TRUE);
}
- Add Support for the following PS/2 mice: - Microsoft IntelliMouse Explorer: 2 buttons on top, 2 side buttons and a wheel which also acts as the middle button. The mouse is recognized as "IntelliMouse Explorer". - Genius NetScroll Optical: 2 buttons on top, 2 side buttons and a wheel which also acts as the middle button. The mouse is recognized as "NetMouse/NetScroll Optical". - MouseSystems SmartScroll Mouse (OEM from Genius?): 3 buttons on top, 1 side button and a wheel. The mouse is recognized as Genius "NetScroll". - IBM ScrollPoint: 2 buttons on top and a stick between the buttons. The stick can perform "horizontal scroll" in W*ndows environment. The horizontal movement of the stick is detected. It is currently mapped to the Z axis movement in the same way as the first wheel. The mouse is recognized as "MouseMan+", as it is considered to be a variation of MouseMan. - A4 Tech 4D and 4D+ mice. These mice have two wheels! The movement of the second wheel is reported as the Z axis movement in the same way as the first wheel. These mice are recognized as "4D Mouse" and "4D+ Mouse". - Tweak IntelliMouse support code a bit so that less-than-compatible wheel mice can work properly with the psm driver. - Add driver configuration flags which correspond to the kernel options PSM_HOOKRESUME and PSM_RESETAFTERSUSPEND, so that we don't need to recompile the kernel when we need these functions. - Properly keep track of the irq resource. - Add a watchdog timer in case interrupts are lost (experimental). - Add `detach' function (experimental).
2000-03-18 15:21:40 +00:00
/* Logitech MouseMan+/FirstMouse+, IBM ScrollPoint Mouse */
static int
enable_mmanplus(KBDC kbdc, struct psm_softc *sc)
{
2008-04-08 19:09:45 +00:00
int data[3];
/* the special sequence to enable the fourth button and the roller. */
/*
* NOTE: for ScrollPoint to respond correctly, the SET_RESOLUTION
* must be called exactly three times since the last RESET command
* before this sequence. XXX
*/
if (!set_mouse_scaling(kbdc, 1))
return (FALSE);
if (!mouse_ext_command(kbdc, 0x39) || !mouse_ext_command(kbdc, 0xdb))
return (FALSE);
if (get_mouse_status(kbdc, data, 1, 3) < 3)
return (FALSE);
/*
2012-09-20 10:07:31 +00:00
* PS2++ protocol, packet type 0
2008-04-08 19:09:45 +00:00
*
* b7 b6 b5 b4 b3 b2 b1 b0
* byte 1: * 1 p3 p2 1 * * *
* byte 2: 1 1 p1 p0 m1 m0 1 0
* byte 3: m7 m6 m5 m4 m3 m2 m1 m0
*
* p3-p0: packet type: 0
* m7-m0: model ID: MouseMan+:0x50,
* FirstMouse+:0x51,
* ScrollPoint:0x58...
*/
/* check constant bits */
if ((data[0] & MOUSE_PS2PLUS_SYNCMASK) != MOUSE_PS2PLUS_SYNC)
return (FALSE);
if ((data[1] & 0xc3) != 0xc2)
return (FALSE);
/* check d3-d0 in byte 2 */
if (!MOUSE_PS2PLUS_CHECKBITS(data))
return (FALSE);
/* check p3-p0 */
if (MOUSE_PS2PLUS_PACKET_TYPE(data) != 0)
return (FALSE);
if (sc != NULL) {
sc->hw.hwid &= 0x00ff;
sc->hw.hwid |= data[2] << 8; /* save model ID */
}
2008-04-08 19:09:45 +00:00
/*
* MouseMan+ (or FirstMouse+) is now in its native mode, in which
* the wheel and the fourth button events are encoded in the
* special data packet. The mouse may be put in the IntelliMouse mode
* if it is initialized by the IntelliMouse's method.
*/
return (TRUE);
}
- Add Support for the following PS/2 mice: - Microsoft IntelliMouse Explorer: 2 buttons on top, 2 side buttons and a wheel which also acts as the middle button. The mouse is recognized as "IntelliMouse Explorer". - Genius NetScroll Optical: 2 buttons on top, 2 side buttons and a wheel which also acts as the middle button. The mouse is recognized as "NetMouse/NetScroll Optical". - MouseSystems SmartScroll Mouse (OEM from Genius?): 3 buttons on top, 1 side button and a wheel. The mouse is recognized as Genius "NetScroll". - IBM ScrollPoint: 2 buttons on top and a stick between the buttons. The stick can perform "horizontal scroll" in W*ndows environment. The horizontal movement of the stick is detected. It is currently mapped to the Z axis movement in the same way as the first wheel. The mouse is recognized as "MouseMan+", as it is considered to be a variation of MouseMan. - A4 Tech 4D and 4D+ mice. These mice have two wheels! The movement of the second wheel is reported as the Z axis movement in the same way as the first wheel. These mice are recognized as "4D Mouse" and "4D+ Mouse". - Tweak IntelliMouse support code a bit so that less-than-compatible wheel mice can work properly with the psm driver. - Add driver configuration flags which correspond to the kernel options PSM_HOOKRESUME and PSM_RESETAFTERSUSPEND, so that we don't need to recompile the kernel when we need these functions. - Properly keep track of the irq resource. - Add a watchdog timer in case interrupts are lost (experimental). - Add `detach' function (experimental).
2000-03-18 15:21:40 +00:00
/* MS IntelliMouse Explorer */
static int
enable_msexplorer(KBDC kbdc, struct psm_softc *sc)
- Add Support for the following PS/2 mice: - Microsoft IntelliMouse Explorer: 2 buttons on top, 2 side buttons and a wheel which also acts as the middle button. The mouse is recognized as "IntelliMouse Explorer". - Genius NetScroll Optical: 2 buttons on top, 2 side buttons and a wheel which also acts as the middle button. The mouse is recognized as "NetMouse/NetScroll Optical". - MouseSystems SmartScroll Mouse (OEM from Genius?): 3 buttons on top, 1 side button and a wheel. The mouse is recognized as Genius "NetScroll". - IBM ScrollPoint: 2 buttons on top and a stick between the buttons. The stick can perform "horizontal scroll" in W*ndows environment. The horizontal movement of the stick is detected. It is currently mapped to the Z axis movement in the same way as the first wheel. The mouse is recognized as "MouseMan+", as it is considered to be a variation of MouseMan. - A4 Tech 4D and 4D+ mice. These mice have two wheels! The movement of the second wheel is reported as the Z axis movement in the same way as the first wheel. These mice are recognized as "4D Mouse" and "4D+ Mouse". - Tweak IntelliMouse support code a bit so that less-than-compatible wheel mice can work properly with the psm driver. - Add driver configuration flags which correspond to the kernel options PSM_HOOKRESUME and PSM_RESETAFTERSUSPEND, so that we don't need to recompile the kernel when we need these functions. - Properly keep track of the irq resource. - Add a watchdog timer in case interrupts are lost (experimental). - Add `detach' function (experimental).
2000-03-18 15:21:40 +00:00
{
2008-04-08 19:09:45 +00:00
static u_char rate0[] = { 200, 100, 80, };
static u_char rate1[] = { 200, 200, 80, };
int id;
int i;
/*
* This is needed for at least A4Tech X-7xx mice - they do not go
* straight to Explorer mode, but need to be set to Intelli mode
* first.
*/
enable_msintelli(kbdc, sc);
2008-04-08 19:09:45 +00:00
/* the special sequence to enable the extra buttons and the roller. */
for (i = 0; i < sizeof(rate1)/sizeof(rate1[0]); ++i)
if (set_mouse_sampling_rate(kbdc, rate1[i]) != rate1[i])
return (FALSE);
/* the device will give the genuine ID only after the above sequence */
id = get_aux_id(kbdc);
if (id != PSM_EXPLORER_ID)
return (FALSE);
if (sc != NULL) {
sc->hw.buttons = 5; /* IntelliMouse Explorer XXX */
sc->hw.hwid = id;
}
2008-04-08 19:09:45 +00:00
/*
* XXX: this is a kludge to fool some KVM switch products
* which think they are clever enough to know the 4-byte IntelliMouse
* protocol, and assume any other protocols use 3-byte packets.
* They don't convey 4-byte data packets from the IntelliMouse Explorer
* correctly to the host computer because of this!
* The following sequence is actually IntelliMouse's "wake up"
* sequence; it will make the KVM think the mouse is IntelliMouse
* when it is in fact IntelliMouse Explorer.
*/
for (i = 0; i < sizeof(rate0)/sizeof(rate0[0]); ++i)
if (set_mouse_sampling_rate(kbdc, rate0[i]) != rate0[i])
break;
get_aux_id(kbdc);
2008-04-08 19:09:45 +00:00
return (TRUE);
- Add Support for the following PS/2 mice: - Microsoft IntelliMouse Explorer: 2 buttons on top, 2 side buttons and a wheel which also acts as the middle button. The mouse is recognized as "IntelliMouse Explorer". - Genius NetScroll Optical: 2 buttons on top, 2 side buttons and a wheel which also acts as the middle button. The mouse is recognized as "NetMouse/NetScroll Optical". - MouseSystems SmartScroll Mouse (OEM from Genius?): 3 buttons on top, 1 side button and a wheel. The mouse is recognized as Genius "NetScroll". - IBM ScrollPoint: 2 buttons on top and a stick between the buttons. The stick can perform "horizontal scroll" in W*ndows environment. The horizontal movement of the stick is detected. It is currently mapped to the Z axis movement in the same way as the first wheel. The mouse is recognized as "MouseMan+", as it is considered to be a variation of MouseMan. - A4 Tech 4D and 4D+ mice. These mice have two wheels! The movement of the second wheel is reported as the Z axis movement in the same way as the first wheel. These mice are recognized as "4D Mouse" and "4D+ Mouse". - Tweak IntelliMouse support code a bit so that less-than-compatible wheel mice can work properly with the psm driver. - Add driver configuration flags which correspond to the kernel options PSM_HOOKRESUME and PSM_RESETAFTERSUSPEND, so that we don't need to recompile the kernel when we need these functions. - Properly keep track of the irq resource. - Add a watchdog timer in case interrupts are lost (experimental). - Add `detach' function (experimental).
2000-03-18 15:21:40 +00:00
}
/* MS IntelliMouse */
static int
enable_msintelli(KBDC kbdc, struct psm_softc *sc)
{
2008-04-08 19:09:45 +00:00
/*
* Logitech MouseMan+ and FirstMouse+ will also respond to this
* probe routine and act like IntelliMouse.
*/
static u_char rate[] = { 200, 100, 80, };
int id;
int i;
/* the special sequence to enable the third button and the roller. */
for (i = 0; i < sizeof(rate)/sizeof(rate[0]); ++i)
if (set_mouse_sampling_rate(kbdc, rate[i]) != rate[i])
return (FALSE);
/* the device will give the genuine ID only after the above sequence */
id = get_aux_id(kbdc);
if (id != PSM_INTELLI_ID)
return (FALSE);
if (sc != NULL) {
sc->hw.buttons = 3;
sc->hw.hwid = id;
}
2008-04-08 19:09:45 +00:00
return (TRUE);
}
- Add Support for the following PS/2 mice: - Microsoft IntelliMouse Explorer: 2 buttons on top, 2 side buttons and a wheel which also acts as the middle button. The mouse is recognized as "IntelliMouse Explorer". - Genius NetScroll Optical: 2 buttons on top, 2 side buttons and a wheel which also acts as the middle button. The mouse is recognized as "NetMouse/NetScroll Optical". - MouseSystems SmartScroll Mouse (OEM from Genius?): 3 buttons on top, 1 side button and a wheel. The mouse is recognized as Genius "NetScroll". - IBM ScrollPoint: 2 buttons on top and a stick between the buttons. The stick can perform "horizontal scroll" in W*ndows environment. The horizontal movement of the stick is detected. It is currently mapped to the Z axis movement in the same way as the first wheel. The mouse is recognized as "MouseMan+", as it is considered to be a variation of MouseMan. - A4 Tech 4D and 4D+ mice. These mice have two wheels! The movement of the second wheel is reported as the Z axis movement in the same way as the first wheel. These mice are recognized as "4D Mouse" and "4D+ Mouse". - Tweak IntelliMouse support code a bit so that less-than-compatible wheel mice can work properly with the psm driver. - Add driver configuration flags which correspond to the kernel options PSM_HOOKRESUME and PSM_RESETAFTERSUSPEND, so that we don't need to recompile the kernel when we need these functions. - Properly keep track of the irq resource. - Add a watchdog timer in case interrupts are lost (experimental). - Add `detach' function (experimental).
2000-03-18 15:21:40 +00:00
/* A4 Tech 4D Mouse */
static int
enable_4dmouse(KBDC kbdc, struct psm_softc *sc)
- Add Support for the following PS/2 mice: - Microsoft IntelliMouse Explorer: 2 buttons on top, 2 side buttons and a wheel which also acts as the middle button. The mouse is recognized as "IntelliMouse Explorer". - Genius NetScroll Optical: 2 buttons on top, 2 side buttons and a wheel which also acts as the middle button. The mouse is recognized as "NetMouse/NetScroll Optical". - MouseSystems SmartScroll Mouse (OEM from Genius?): 3 buttons on top, 1 side button and a wheel. The mouse is recognized as Genius "NetScroll". - IBM ScrollPoint: 2 buttons on top and a stick between the buttons. The stick can perform "horizontal scroll" in W*ndows environment. The horizontal movement of the stick is detected. It is currently mapped to the Z axis movement in the same way as the first wheel. The mouse is recognized as "MouseMan+", as it is considered to be a variation of MouseMan. - A4 Tech 4D and 4D+ mice. These mice have two wheels! The movement of the second wheel is reported as the Z axis movement in the same way as the first wheel. These mice are recognized as "4D Mouse" and "4D+ Mouse". - Tweak IntelliMouse support code a bit so that less-than-compatible wheel mice can work properly with the psm driver. - Add driver configuration flags which correspond to the kernel options PSM_HOOKRESUME and PSM_RESETAFTERSUSPEND, so that we don't need to recompile the kernel when we need these functions. - Properly keep track of the irq resource. - Add a watchdog timer in case interrupts are lost (experimental). - Add `detach' function (experimental).
2000-03-18 15:21:40 +00:00
{
2008-04-08 19:09:45 +00:00
/*
* Newer wheel mice from A4 Tech may use the 4D+ protocol.
*/
static u_char rate[] = { 200, 100, 80, 60, 40, 20 };
int id;
int i;
for (i = 0; i < sizeof(rate)/sizeof(rate[0]); ++i)
if (set_mouse_sampling_rate(kbdc, rate[i]) != rate[i])
return (FALSE);
id = get_aux_id(kbdc);
/*
* WinEasy 4D, 4 Way Scroll 4D: 6
* Cable-Free 4D: 8 (4DPLUS)
* WinBest 4D+, 4 Way Scroll 4D+: 8 (4DPLUS)
*/
if (id != PSM_4DMOUSE_ID)
return (FALSE);
if (sc != NULL) {
sc->hw.buttons = 3; /* XXX some 4D mice have 4? */
sc->hw.hwid = id;
}
2008-04-08 19:09:45 +00:00
return (TRUE);
- Add Support for the following PS/2 mice: - Microsoft IntelliMouse Explorer: 2 buttons on top, 2 side buttons and a wheel which also acts as the middle button. The mouse is recognized as "IntelliMouse Explorer". - Genius NetScroll Optical: 2 buttons on top, 2 side buttons and a wheel which also acts as the middle button. The mouse is recognized as "NetMouse/NetScroll Optical". - MouseSystems SmartScroll Mouse (OEM from Genius?): 3 buttons on top, 1 side button and a wheel. The mouse is recognized as Genius "NetScroll". - IBM ScrollPoint: 2 buttons on top and a stick between the buttons. The stick can perform "horizontal scroll" in W*ndows environment. The horizontal movement of the stick is detected. It is currently mapped to the Z axis movement in the same way as the first wheel. The mouse is recognized as "MouseMan+", as it is considered to be a variation of MouseMan. - A4 Tech 4D and 4D+ mice. These mice have two wheels! The movement of the second wheel is reported as the Z axis movement in the same way as the first wheel. These mice are recognized as "4D Mouse" and "4D+ Mouse". - Tweak IntelliMouse support code a bit so that less-than-compatible wheel mice can work properly with the psm driver. - Add driver configuration flags which correspond to the kernel options PSM_HOOKRESUME and PSM_RESETAFTERSUSPEND, so that we don't need to recompile the kernel when we need these functions. - Properly keep track of the irq resource. - Add a watchdog timer in case interrupts are lost (experimental). - Add `detach' function (experimental).
2000-03-18 15:21:40 +00:00
}
/* A4 Tech 4D+ Mouse */
static int
enable_4dplus(KBDC kbdc, struct psm_softc *sc)
- Add Support for the following PS/2 mice: - Microsoft IntelliMouse Explorer: 2 buttons on top, 2 side buttons and a wheel which also acts as the middle button. The mouse is recognized as "IntelliMouse Explorer". - Genius NetScroll Optical: 2 buttons on top, 2 side buttons and a wheel which also acts as the middle button. The mouse is recognized as "NetMouse/NetScroll Optical". - MouseSystems SmartScroll Mouse (OEM from Genius?): 3 buttons on top, 1 side button and a wheel. The mouse is recognized as Genius "NetScroll". - IBM ScrollPoint: 2 buttons on top and a stick between the buttons. The stick can perform "horizontal scroll" in W*ndows environment. The horizontal movement of the stick is detected. It is currently mapped to the Z axis movement in the same way as the first wheel. The mouse is recognized as "MouseMan+", as it is considered to be a variation of MouseMan. - A4 Tech 4D and 4D+ mice. These mice have two wheels! The movement of the second wheel is reported as the Z axis movement in the same way as the first wheel. These mice are recognized as "4D Mouse" and "4D+ Mouse". - Tweak IntelliMouse support code a bit so that less-than-compatible wheel mice can work properly with the psm driver. - Add driver configuration flags which correspond to the kernel options PSM_HOOKRESUME and PSM_RESETAFTERSUSPEND, so that we don't need to recompile the kernel when we need these functions. - Properly keep track of the irq resource. - Add a watchdog timer in case interrupts are lost (experimental). - Add `detach' function (experimental).
2000-03-18 15:21:40 +00:00
{
2008-04-08 19:09:45 +00:00
/*
* Newer wheel mice from A4 Tech seem to use this protocol.
* Older models are recognized as either 4D Mouse or IntelliMouse.
*/
int id;
/*
* enable_4dmouse() already issued the following ID sequence...
static u_char rate[] = { 200, 100, 80, 60, 40, 20 };
int i;
for (i = 0; i < sizeof(rate)/sizeof(rate[0]); ++i)
if (set_mouse_sampling_rate(kbdc, rate[i]) != rate[i])
return (FALSE);
*/
id = get_aux_id(kbdc);
switch (id) {
case PSM_4DPLUS_ID:
break;
case PSM_4DPLUS_RFSW35_ID:
break;
default:
return (FALSE);
}
if (sc != NULL) {
sc->hw.buttons = (id == PSM_4DPLUS_ID) ? 4 : 3;
sc->hw.hwid = id;
}
2008-04-08 19:09:45 +00:00
return (TRUE);
- Add Support for the following PS/2 mice: - Microsoft IntelliMouse Explorer: 2 buttons on top, 2 side buttons and a wheel which also acts as the middle button. The mouse is recognized as "IntelliMouse Explorer". - Genius NetScroll Optical: 2 buttons on top, 2 side buttons and a wheel which also acts as the middle button. The mouse is recognized as "NetMouse/NetScroll Optical". - MouseSystems SmartScroll Mouse (OEM from Genius?): 3 buttons on top, 1 side button and a wheel. The mouse is recognized as Genius "NetScroll". - IBM ScrollPoint: 2 buttons on top and a stick between the buttons. The stick can perform "horizontal scroll" in W*ndows environment. The horizontal movement of the stick is detected. It is currently mapped to the Z axis movement in the same way as the first wheel. The mouse is recognized as "MouseMan+", as it is considered to be a variation of MouseMan. - A4 Tech 4D and 4D+ mice. These mice have two wheels! The movement of the second wheel is reported as the Z axis movement in the same way as the first wheel. These mice are recognized as "4D Mouse" and "4D+ Mouse". - Tweak IntelliMouse support code a bit so that less-than-compatible wheel mice can work properly with the psm driver. - Add driver configuration flags which correspond to the kernel options PSM_HOOKRESUME and PSM_RESETAFTERSUSPEND, so that we don't need to recompile the kernel when we need these functions. - Properly keep track of the irq resource. - Add a watchdog timer in case interrupts are lost (experimental). - Add `detach' function (experimental).
2000-03-18 15:21:40 +00:00
}
/* Synaptics Touchpad */
static int
synaptics_sysctl(SYSCTL_HANDLER_ARGS)
{
int error, arg;
/* Read the current value. */
arg = *(int *)oidp->oid_arg1;
error = sysctl_handle_int(oidp, &arg, 0, req);
/* Sanity check. */
if (error || !req->newptr)
return (error);
/*
* Check that the new value is in the concerned node's range
* of values.
*/
switch (oidp->oid_arg2) {
case SYNAPTICS_SYSCTL_MIN_PRESSURE:
case SYNAPTICS_SYSCTL_MAX_PRESSURE:
if (arg < 0 || arg > 255)
return (EINVAL);
break;
case SYNAPTICS_SYSCTL_MAX_WIDTH:
if (arg < 4 || arg > 15)
return (EINVAL);
break;
case SYNAPTICS_SYSCTL_MARGIN_TOP:
case SYNAPTICS_SYSCTL_MARGIN_RIGHT:
case SYNAPTICS_SYSCTL_MARGIN_BOTTOM:
case SYNAPTICS_SYSCTL_MARGIN_LEFT:
case SYNAPTICS_SYSCTL_NA_TOP:
case SYNAPTICS_SYSCTL_NA_RIGHT:
case SYNAPTICS_SYSCTL_NA_BOTTOM:
case SYNAPTICS_SYSCTL_NA_LEFT:
if (arg < 0 || arg > 6143)
return (EINVAL);
break;
case SYNAPTICS_SYSCTL_WINDOW_MIN:
case SYNAPTICS_SYSCTL_WINDOW_MAX:
case SYNAPTICS_SYSCTL_TAP_MIN_QUEUE:
if (arg < 1 || arg > SYNAPTICS_PACKETQUEUE)
return (EINVAL);
break;
case SYNAPTICS_SYSCTL_MULTIPLICATOR:
case SYNAPTICS_SYSCTL_WEIGHT_CURRENT:
case SYNAPTICS_SYSCTL_WEIGHT_PREVIOUS:
case SYNAPTICS_SYSCTL_WEIGHT_PREVIOUS_NA:
case SYNAPTICS_SYSCTL_WEIGHT_LEN_SQUARED:
case SYNAPTICS_SYSCTL_DIV_MIN:
case SYNAPTICS_SYSCTL_DIV_MAX:
case SYNAPTICS_SYSCTL_DIV_MAX_NA:
case SYNAPTICS_SYSCTL_DIV_LEN:
case SYNAPTICS_SYSCTL_VSCROLL_DIV_MIN:
case SYNAPTICS_SYSCTL_VSCROLL_DIV_MAX:
if (arg < 1)
return (EINVAL);
break;
case SYNAPTICS_SYSCTL_TAP_MAX_DELTA:
case SYNAPTICS_SYSCTL_TAPHOLD_TIMEOUT:
case SYNAPTICS_SYSCTL_VSCROLL_MIN_DELTA:
if (arg < 0)
return (EINVAL);
break;
case SYNAPTICS_SYSCTL_VSCROLL_HOR_AREA:
case SYNAPTICS_SYSCTL_VSCROLL_VER_AREA:
if (arg < -6143 || arg > 6143)
return (EINVAL);
break;
default:
return (EINVAL);
}
/* Update. */
*(int *)oidp->oid_arg1 = arg;
return (error);
}
static void
synaptics_sysctl_create_tree(struct psm_softc *sc)
{
if (sc->syninfo.sysctl_tree != NULL)
return;
2008-04-08 19:09:45 +00:00
/* Attach extra synaptics sysctl nodes under hw.psm.synaptics */
sysctl_ctx_init(&sc->syninfo.sysctl_ctx);
sc->syninfo.sysctl_tree = SYSCTL_ADD_NODE(&sc->syninfo.sysctl_ctx,
SYSCTL_STATIC_CHILDREN(_hw_psm), OID_AUTO, "synaptics", CTLFLAG_RD,
0, "Synaptics TouchPad");
/* hw.psm.synaptics.directional_scrolls. */
2008-04-08 19:09:45 +00:00
sc->syninfo.directional_scrolls = 1;
SYSCTL_ADD_INT(&sc->syninfo.sysctl_ctx,
SYSCTL_CHILDREN(sc->syninfo.sysctl_tree), OID_AUTO,
"directional_scrolls", CTLFLAG_RW|CTLFLAG_ANYBODY,
2008-04-08 19:09:45 +00:00
&sc->syninfo.directional_scrolls, 0,
"Enable hardware scrolling pad (if non-zero) or register it as "
"a middle-click (if 0)");
/* hw.psm.synaptics.min_pressure. */
sc->syninfo.min_pressure = 16;
SYSCTL_ADD_PROC(&sc->syninfo.sysctl_ctx,
2008-04-08 19:09:45 +00:00
SYSCTL_CHILDREN(sc->syninfo.sysctl_tree), OID_AUTO,
"min_pressure", CTLTYPE_INT|CTLFLAG_RW|CTLFLAG_ANYBODY,
&sc->syninfo.min_pressure, SYNAPTICS_SYSCTL_MIN_PRESSURE,
synaptics_sysctl, "I",
"Minimum pressure required to start an action");
/* hw.psm.synaptics.max_pressure. */
sc->syninfo.max_pressure = 220;
SYSCTL_ADD_PROC(&sc->syninfo.sysctl_ctx,
2008-04-08 19:09:45 +00:00
SYSCTL_CHILDREN(sc->syninfo.sysctl_tree), OID_AUTO,
"max_pressure", CTLTYPE_INT|CTLFLAG_RW|CTLFLAG_ANYBODY,
&sc->syninfo.max_pressure, SYNAPTICS_SYSCTL_MAX_PRESSURE,
synaptics_sysctl, "I",
"Maximum pressure to detect palm");
/* hw.psm.synaptics.max_width. */
sc->syninfo.max_width = 10;
SYSCTL_ADD_PROC(&sc->syninfo.sysctl_ctx,
SYSCTL_CHILDREN(sc->syninfo.sysctl_tree), OID_AUTO,
"max_width", CTLTYPE_INT|CTLFLAG_RW|CTLFLAG_ANYBODY,
&sc->syninfo.max_width, SYNAPTICS_SYSCTL_MAX_WIDTH,
synaptics_sysctl, "I",
"Maximum finger width to detect palm");
/* hw.psm.synaptics.top_margin. */
sc->syninfo.margin_top = 200;
SYSCTL_ADD_PROC(&sc->syninfo.sysctl_ctx,
SYSCTL_CHILDREN(sc->syninfo.sysctl_tree), OID_AUTO,
"margin_top", CTLTYPE_INT|CTLFLAG_RW|CTLFLAG_ANYBODY,
&sc->syninfo.margin_top, SYNAPTICS_SYSCTL_MARGIN_TOP,
synaptics_sysctl, "I",
"Top margin");
/* hw.psm.synaptics.right_margin. */
sc->syninfo.margin_right = 200;
SYSCTL_ADD_PROC(&sc->syninfo.sysctl_ctx,
SYSCTL_CHILDREN(sc->syninfo.sysctl_tree), OID_AUTO,
"margin_right", CTLTYPE_INT|CTLFLAG_RW|CTLFLAG_ANYBODY,
&sc->syninfo.margin_right, SYNAPTICS_SYSCTL_MARGIN_RIGHT,
synaptics_sysctl, "I",
"Right margin");
/* hw.psm.synaptics.bottom_margin. */
sc->syninfo.margin_bottom = 200;
SYSCTL_ADD_PROC(&sc->syninfo.sysctl_ctx,
SYSCTL_CHILDREN(sc->syninfo.sysctl_tree), OID_AUTO,
"margin_bottom", CTLTYPE_INT|CTLFLAG_RW|CTLFLAG_ANYBODY,
&sc->syninfo.margin_bottom, SYNAPTICS_SYSCTL_MARGIN_BOTTOM,
synaptics_sysctl, "I",
"Bottom margin");
/* hw.psm.synaptics.left_margin. */
sc->syninfo.margin_left = 200;
SYSCTL_ADD_PROC(&sc->syninfo.sysctl_ctx,
SYSCTL_CHILDREN(sc->syninfo.sysctl_tree), OID_AUTO,
"margin_left", CTLTYPE_INT|CTLFLAG_RW|CTLFLAG_ANYBODY,
&sc->syninfo.margin_left, SYNAPTICS_SYSCTL_MARGIN_LEFT,
synaptics_sysctl, "I",
"Left margin");
/* hw.psm.synaptics.na_top. */
sc->syninfo.na_top = 1783;
SYSCTL_ADD_PROC(&sc->syninfo.sysctl_ctx,
SYSCTL_CHILDREN(sc->syninfo.sysctl_tree), OID_AUTO,
"na_top", CTLTYPE_INT|CTLFLAG_RW|CTLFLAG_ANYBODY,
&sc->syninfo.na_top, SYNAPTICS_SYSCTL_NA_TOP,
synaptics_sysctl, "I",
"Top noisy area, where weight_previous_na is used instead "
"of weight_previous");
/* hw.psm.synaptics.na_right. */
sc->syninfo.na_right = 563;
SYSCTL_ADD_PROC(&sc->syninfo.sysctl_ctx,
SYSCTL_CHILDREN(sc->syninfo.sysctl_tree), OID_AUTO,
"na_right", CTLTYPE_INT|CTLFLAG_RW|CTLFLAG_ANYBODY,
&sc->syninfo.na_right, SYNAPTICS_SYSCTL_NA_RIGHT,
synaptics_sysctl, "I",
"Right noisy area, where weight_previous_na is used instead "
"of weight_previous");
/* hw.psm.synaptics.na_bottom. */
sc->syninfo.na_bottom = 1408;
SYSCTL_ADD_PROC(&sc->syninfo.sysctl_ctx,
SYSCTL_CHILDREN(sc->syninfo.sysctl_tree), OID_AUTO,
"na_bottom", CTLTYPE_INT|CTLFLAG_RW|CTLFLAG_ANYBODY,
&sc->syninfo.na_bottom, SYNAPTICS_SYSCTL_NA_BOTTOM,
synaptics_sysctl, "I",
"Bottom noisy area, where weight_previous_na is used instead "
"of weight_previous");
/* hw.psm.synaptics.na_left. */
sc->syninfo.na_left = 1600;
SYSCTL_ADD_PROC(&sc->syninfo.sysctl_ctx,
SYSCTL_CHILDREN(sc->syninfo.sysctl_tree), OID_AUTO,
"na_left", CTLTYPE_INT|CTLFLAG_RW|CTLFLAG_ANYBODY,
&sc->syninfo.na_left, SYNAPTICS_SYSCTL_NA_LEFT,
synaptics_sysctl, "I",
"Left noisy area, where weight_previous_na is used instead "
"of weight_previous");
/* hw.psm.synaptics.window_min. */
sc->syninfo.window_min = 4;
SYSCTL_ADD_PROC(&sc->syninfo.sysctl_ctx,
SYSCTL_CHILDREN(sc->syninfo.sysctl_tree), OID_AUTO,
"window_min", CTLTYPE_INT|CTLFLAG_RW|CTLFLAG_ANYBODY,
&sc->syninfo.window_min, SYNAPTICS_SYSCTL_WINDOW_MIN,
synaptics_sysctl, "I",
"Minimum window size to start an action");
/* hw.psm.synaptics.window_max. */
sc->syninfo.window_max = 10;
SYSCTL_ADD_PROC(&sc->syninfo.sysctl_ctx,
SYSCTL_CHILDREN(sc->syninfo.sysctl_tree), OID_AUTO,
"window_max", CTLTYPE_INT|CTLFLAG_RW|CTLFLAG_ANYBODY,
&sc->syninfo.window_max, SYNAPTICS_SYSCTL_WINDOW_MAX,
synaptics_sysctl, "I",
"Maximum window size");
/* hw.psm.synaptics.multiplicator. */
sc->syninfo.multiplicator = 10000;
SYSCTL_ADD_PROC(&sc->syninfo.sysctl_ctx,
SYSCTL_CHILDREN(sc->syninfo.sysctl_tree), OID_AUTO,
"multiplicator", CTLTYPE_INT|CTLFLAG_RW|CTLFLAG_ANYBODY,
&sc->syninfo.multiplicator, SYNAPTICS_SYSCTL_MULTIPLICATOR,
synaptics_sysctl, "I",
"Multiplicator to increase precision in averages and divisions");
/* hw.psm.synaptics.weight_current. */
sc->syninfo.weight_current = 3;
SYSCTL_ADD_PROC(&sc->syninfo.sysctl_ctx,
SYSCTL_CHILDREN(sc->syninfo.sysctl_tree), OID_AUTO,
"weight_current", CTLTYPE_INT|CTLFLAG_RW|CTLFLAG_ANYBODY,
&sc->syninfo.weight_current, SYNAPTICS_SYSCTL_WEIGHT_CURRENT,
synaptics_sysctl, "I",
"Weight of the current movement in the new average");
/* hw.psm.synaptics.weight_previous. */
sc->syninfo.weight_previous = 6;
SYSCTL_ADD_PROC(&sc->syninfo.sysctl_ctx,
SYSCTL_CHILDREN(sc->syninfo.sysctl_tree), OID_AUTO,
"weight_previous", CTLTYPE_INT|CTLFLAG_RW|CTLFLAG_ANYBODY,
&sc->syninfo.weight_previous, SYNAPTICS_SYSCTL_WEIGHT_PREVIOUS,
synaptics_sysctl, "I",
"Weight of the previous average");
/* hw.psm.synaptics.weight_previous_na. */
sc->syninfo.weight_previous_na = 20;
SYSCTL_ADD_PROC(&sc->syninfo.sysctl_ctx,
2008-04-08 19:09:45 +00:00
SYSCTL_CHILDREN(sc->syninfo.sysctl_tree), OID_AUTO,
"weight_previous_na", CTLTYPE_INT|CTLFLAG_RW|CTLFLAG_ANYBODY,
&sc->syninfo.weight_previous_na,
SYNAPTICS_SYSCTL_WEIGHT_PREVIOUS_NA,
synaptics_sysctl, "I",
"Weight of the previous average (inside the noisy area)");
/* hw.psm.synaptics.weight_len_squared. */
sc->syninfo.weight_len_squared = 2000;
SYSCTL_ADD_PROC(&sc->syninfo.sysctl_ctx,
SYSCTL_CHILDREN(sc->syninfo.sysctl_tree), OID_AUTO,
"weight_len_squared", CTLTYPE_INT|CTLFLAG_RW|CTLFLAG_ANYBODY,
&sc->syninfo.weight_len_squared,
SYNAPTICS_SYSCTL_WEIGHT_LEN_SQUARED,
synaptics_sysctl, "I",
"Length (squared) of segments where weight_previous "
"starts to decrease");
/* hw.psm.synaptics.div_min. */
sc->syninfo.div_min = 9;
SYSCTL_ADD_PROC(&sc->syninfo.sysctl_ctx,
SYSCTL_CHILDREN(sc->syninfo.sysctl_tree), OID_AUTO,
"div_min", CTLTYPE_INT|CTLFLAG_RW|CTLFLAG_ANYBODY,
&sc->syninfo.div_min, SYNAPTICS_SYSCTL_DIV_MIN,
synaptics_sysctl, "I",
"Divisor for fast movements");
/* hw.psm.synaptics.div_max. */
sc->syninfo.div_max = 17;
SYSCTL_ADD_PROC(&sc->syninfo.sysctl_ctx,
SYSCTL_CHILDREN(sc->syninfo.sysctl_tree), OID_AUTO,
"div_max", CTLTYPE_INT|CTLFLAG_RW|CTLFLAG_ANYBODY,
&sc->syninfo.div_max, SYNAPTICS_SYSCTL_DIV_MAX,
synaptics_sysctl, "I",
"Divisor for slow movements");
/* hw.psm.synaptics.div_max_na. */
sc->syninfo.div_max_na = 30;
SYSCTL_ADD_PROC(&sc->syninfo.sysctl_ctx,
SYSCTL_CHILDREN(sc->syninfo.sysctl_tree), OID_AUTO,
"div_max_na", CTLTYPE_INT|CTLFLAG_RW|CTLFLAG_ANYBODY,
&sc->syninfo.div_max_na, SYNAPTICS_SYSCTL_DIV_MAX_NA,
synaptics_sysctl, "I",
"Divisor with slow movements (inside the noisy area)");
/* hw.psm.synaptics.div_len. */
sc->syninfo.div_len = 100;
SYSCTL_ADD_PROC(&sc->syninfo.sysctl_ctx,
SYSCTL_CHILDREN(sc->syninfo.sysctl_tree), OID_AUTO,
"div_len", CTLTYPE_INT|CTLFLAG_RW|CTLFLAG_ANYBODY,
&sc->syninfo.div_len, SYNAPTICS_SYSCTL_DIV_LEN,
synaptics_sysctl, "I",
"Length of segments where div_max starts to decrease");
/* hw.psm.synaptics.tap_max_delta. */
sc->syninfo.tap_max_delta = 80;
SYSCTL_ADD_PROC(&sc->syninfo.sysctl_ctx,
SYSCTL_CHILDREN(sc->syninfo.sysctl_tree), OID_AUTO,
"tap_max_delta", CTLTYPE_INT|CTLFLAG_RW|CTLFLAG_ANYBODY,
&sc->syninfo.tap_max_delta, SYNAPTICS_SYSCTL_TAP_MAX_DELTA,
synaptics_sysctl, "I",
"Length of segments above which a tap is ignored");
/* hw.psm.synaptics.tap_min_queue. */
sc->syninfo.tap_min_queue = 2;
SYSCTL_ADD_PROC(&sc->syninfo.sysctl_ctx,
SYSCTL_CHILDREN(sc->syninfo.sysctl_tree), OID_AUTO,
"tap_min_queue", CTLTYPE_INT|CTLFLAG_RW|CTLFLAG_ANYBODY,
&sc->syninfo.tap_min_queue, SYNAPTICS_SYSCTL_TAP_MIN_QUEUE,
synaptics_sysctl, "I",
"Number of packets required to consider a tap");
/* hw.psm.synaptics.taphold_timeout. */
sc->synaction.in_taphold = 0;
sc->syninfo.taphold_timeout = tap_timeout;
SYSCTL_ADD_PROC(&sc->syninfo.sysctl_ctx,
SYSCTL_CHILDREN(sc->syninfo.sysctl_tree), OID_AUTO,
"taphold_timeout", CTLTYPE_INT|CTLFLAG_RW|CTLFLAG_ANYBODY,
&sc->syninfo.taphold_timeout, SYNAPTICS_SYSCTL_TAPHOLD_TIMEOUT,
synaptics_sysctl, "I",
"Maximum elapsed time between two taps to consider a tap-hold "
"action");
/* hw.psm.synaptics.vscroll_hor_area. */
sc->syninfo.vscroll_hor_area = 0; /* 1300 */
SYSCTL_ADD_PROC(&sc->syninfo.sysctl_ctx,
SYSCTL_CHILDREN(sc->syninfo.sysctl_tree), OID_AUTO,
"vscroll_hor_area", CTLTYPE_INT|CTLFLAG_RW|CTLFLAG_ANYBODY,
&sc->syninfo.vscroll_hor_area, SYNAPTICS_SYSCTL_VSCROLL_HOR_AREA,
synaptics_sysctl, "I",
"Area reserved for horizontal virtual scrolling");
/* hw.psm.synaptics.vscroll_ver_area. */
sc->syninfo.vscroll_ver_area = -600;
SYSCTL_ADD_PROC(&sc->syninfo.sysctl_ctx,
SYSCTL_CHILDREN(sc->syninfo.sysctl_tree), OID_AUTO,
"vscroll_ver_area", CTLTYPE_INT|CTLFLAG_RW|CTLFLAG_ANYBODY,
&sc->syninfo.vscroll_ver_area, SYNAPTICS_SYSCTL_VSCROLL_VER_AREA,
synaptics_sysctl, "I",
"Area reserved for vertical virtual scrolling");
/* hw.psm.synaptics.vscroll_min_delta. */
sc->syninfo.vscroll_min_delta = 50;
SYSCTL_ADD_PROC(&sc->syninfo.sysctl_ctx,
SYSCTL_CHILDREN(sc->syninfo.sysctl_tree), OID_AUTO,
"vscroll_min_delta", CTLTYPE_INT|CTLFLAG_RW|CTLFLAG_ANYBODY,
&sc->syninfo.vscroll_min_delta,
SYNAPTICS_SYSCTL_VSCROLL_MIN_DELTA,
synaptics_sysctl, "I",
"Minimum movement to consider virtual scrolling");
/* hw.psm.synaptics.vscroll_div_min. */
sc->syninfo.vscroll_div_min = 100;
SYSCTL_ADD_PROC(&sc->syninfo.sysctl_ctx,
SYSCTL_CHILDREN(sc->syninfo.sysctl_tree), OID_AUTO,
"vscroll_div_min", CTLTYPE_INT|CTLFLAG_RW|CTLFLAG_ANYBODY,
&sc->syninfo.vscroll_div_min, SYNAPTICS_SYSCTL_VSCROLL_DIV_MIN,
synaptics_sysctl, "I",
"Divisor for fast scrolling");
/* hw.psm.synaptics.vscroll_div_min. */
sc->syninfo.vscroll_div_max = 150;
SYSCTL_ADD_PROC(&sc->syninfo.sysctl_ctx,
SYSCTL_CHILDREN(sc->syninfo.sysctl_tree), OID_AUTO,
"vscroll_div_max", CTLTYPE_INT|CTLFLAG_RW|CTLFLAG_ANYBODY,
&sc->syninfo.vscroll_div_max, SYNAPTICS_SYSCTL_VSCROLL_DIV_MAX,
synaptics_sysctl, "I",
"Divisor for slow scrolling");
}
static int
enable_synaptics(KBDC kbdc, struct psm_softc *sc)
{
synapticshw_t synhw;
int status[3];
int buttons;
VLOG(3, (LOG_DEBUG, "synaptics: BEGIN init\n"));
2008-04-08 19:09:45 +00:00
/*
* Just to be on the safe side: this avoids troubles with
* following mouse_ext_command() when the previous command
* was PSMC_SET_RESOLUTION. Set Scaling has no effect on
* Synaptics Touchpad behaviour.
*/
2008-04-08 19:09:45 +00:00
set_mouse_scaling(kbdc, 1);
/* Identify the Touchpad version. */
2008-04-08 19:09:45 +00:00
if (mouse_ext_command(kbdc, 0) == 0)
return (FALSE);
if (get_mouse_status(kbdc, status, 0, 3) != 3)
return (FALSE);
if (status[1] != 0x47)
return (FALSE);
bzero(&synhw, sizeof(synhw));
synhw.infoMinor = status[0];
synhw.infoMajor = status[2] & 0x0f;
2008-04-08 19:09:45 +00:00
if (verbose >= 2)
printf("Synaptics Touchpad v%d.%d\n", synhw.infoMajor,
synhw.infoMinor);
2008-04-08 19:09:45 +00:00
if (synhw.infoMajor < 4) {
2008-04-08 19:09:45 +00:00
printf(" Unsupported (pre-v4) Touchpad detected\n");
return (FALSE);
}
/* Get the Touchpad model information. */
2008-04-08 19:09:45 +00:00
if (mouse_ext_command(kbdc, 3) == 0)
return (FALSE);
if (get_mouse_status(kbdc, status, 0, 3) != 3)
return (FALSE);
if ((status[1] & 0x01) != 0) {
printf(" Failed to read model information\n");
return (FALSE);
}
synhw.infoRot180 = (status[0] & 0x80) != 0;
synhw.infoPortrait = (status[0] & 0x40) != 0;
synhw.infoSensor = status[0] & 0x3f;
synhw.infoHardware = (status[1] & 0xfe) >> 1;
synhw.infoNewAbs = (status[2] & 0x80) != 0;
synhw.capPen = (status[2] & 0x40) != 0;
synhw.infoSimplC = (status[2] & 0x20) != 0;
synhw.infoGeometry = status[2] & 0x0f;
if (verbose >= 2) {
2008-04-08 19:09:45 +00:00
printf(" Model information:\n");
printf(" infoRot180: %d\n", synhw.infoRot180);
printf(" infoPortrait: %d\n", synhw.infoPortrait);
printf(" infoSensor: %d\n", synhw.infoSensor);
printf(" infoHardware: %d\n", synhw.infoHardware);
printf(" infoNewAbs: %d\n", synhw.infoNewAbs);
printf(" capPen: %d\n", synhw.capPen);
printf(" infoSimplC: %d\n", synhw.infoSimplC);
printf(" infoGeometry: %d\n", synhw.infoGeometry);
2008-04-08 19:09:45 +00:00
}
/* Read the extended capability bits. */
2008-04-08 19:09:45 +00:00
if (mouse_ext_command(kbdc, 2) == 0)
return (FALSE);
if (get_mouse_status(kbdc, status, 0, 3) != 3)
return (FALSE);
if (!SYNAPTICS_VERSION_GE(synhw, 7, 5) && status[1] != 0x47) {
2008-04-08 19:09:45 +00:00
printf(" Failed to read extended capability bits\n");
return (FALSE);
}
/* Set the different capabilities when they exist. */
buttons = 0;
synhw.capExtended = (status[0] & 0x80) != 0;
if (synhw.capExtended) {
synhw.nExtendedQueries = (status[0] & 0x70) != 0;
synhw.capMiddle = (status[0] & 0x04) != 0;
synhw.capPassthrough = (status[2] & 0x80) != 0;
synhw.capSleep = (status[2] & 0x10) != 0;
synhw.capFourButtons = (status[2] & 0x08) != 0;
synhw.capMultiFinger = (status[2] & 0x02) != 0;
synhw.capPalmDetect = (status[2] & 0x01) != 0;
2008-04-08 19:09:45 +00:00
if (verbose >= 2) {
printf(" Extended capabilities:\n");
printf(" capExtended: %d\n", synhw.capExtended);
printf(" capMiddle: %d\n", synhw.capMiddle);
printf(" nExtendedQueries: %d\n",
synhw.nExtendedQueries);
printf(" capPassthrough: %d\n", synhw.capPassthrough);
printf(" capSleep: %d\n", synhw.capSleep);
printf(" capFourButtons: %d\n", synhw.capFourButtons);
printf(" capMultiFinger: %d\n", synhw.capMultiFinger);
printf(" capPalmDetect: %d\n", synhw.capPalmDetect);
2008-04-08 19:09:45 +00:00
}
/*
* If nExtendedQueries is 1 or greater, then the TouchPad
* supports this number of extended queries. We can load
* more information about buttons using query 0x09.
2008-04-08 19:09:45 +00:00
*/
if (synhw.capExtended && synhw.nExtendedQueries) {
2008-04-08 19:09:45 +00:00
if (mouse_ext_command(kbdc, 0x09) == 0)
return (FALSE);
if (get_mouse_status(kbdc, status, 0, 3) != 3)
return (FALSE);
synhw.nExtendedButtons = (status[1] & 0xf0) >> 4;
/*
* Add the number of extended buttons to the total
* button support count, including the middle button
* if capMiddle support bit is set.
*/
buttons = synhw.nExtendedButtons + synhw.capMiddle;
} else
/*
* If the capFourButtons support bit is set,
* add a fourth button to the total button count.
*/
buttons = synhw.capFourButtons ? 1 : 0;
}
if (verbose >= 2) {
if (synhw.capExtended)
printf(" Additional Buttons: %d\n", buttons);
else
2008-04-08 19:09:45 +00:00
printf(" No extended capabilities\n");
}
/*
* Add the default number of 3 buttons to the total
* count of supported buttons reported above.
*/
buttons += 3;
/*
* Read the mode byte.
2008-04-08 19:09:45 +00:00
*
* XXX: Note the Synaptics documentation also defines the first
* byte of the response to this query to be a constant 0x3b, this
* does not appear to be true for Touchpads with guest devices.
*/
2008-04-08 19:09:45 +00:00
if (mouse_ext_command(kbdc, 1) == 0)
return (FALSE);
if (get_mouse_status(kbdc, status, 0, 3) != 3)
return (FALSE);
if (!SYNAPTICS_VERSION_GE(synhw, 7, 5) && status[1] != 0x47) {
2008-04-08 19:09:45 +00:00
printf(" Failed to read mode byte\n");
return (FALSE);
}
if (sc != NULL)
sc->synhw = synhw;
if (!synaptics_support)
return (FALSE);
/* Set the mode byte; request wmode where available. */
mouse_ext_command(kbdc, synhw.capExtended ? 0xc1 : 0xc0);
2008-04-08 19:09:45 +00:00
/* "Commit" the Set Mode Byte command sent above. */
2008-04-08 19:09:45 +00:00
set_mouse_sampling_rate(kbdc, 20);
VLOG(3, (LOG_DEBUG, "synaptics: END init (%d buttons)\n", buttons));
if (sc != NULL) {
/* Create sysctl tree. */
synaptics_sysctl_create_tree(sc);
sc->hw.buttons = buttons;
}
2008-04-08 19:09:45 +00:00
return (TRUE);
}
/* IBM/Lenovo TrackPoint */
static int
trackpoint_command(KBDC kbdc, int cmd, int loc, int val)
{
const int seq[] = { 0xe2, cmd, loc, val };
int i;
for (i = 0; i < nitems(seq); i++)
if (send_aux_command(kbdc, seq[i]) != PSM_ACK)
return (EIO);
return (0);
}
#define PSM_TPINFO(x) offsetof(struct psm_softc, tpinfo.x)
#define TPMASK 0
#define TPLOC 1
#define TPINFO 2
static int
trackpoint_sysctl(SYSCTL_HANDLER_ARGS)
{
static const int data[][3] = {
{ 0x00, 0x4a, PSM_TPINFO(sensitivity) },
{ 0x00, 0x4d, PSM_TPINFO(inertia) },
{ 0x00, 0x60, PSM_TPINFO(uplateau) },
{ 0x00, 0x57, PSM_TPINFO(reach) },
{ 0x00, 0x58, PSM_TPINFO(draghys) },
{ 0x00, 0x59, PSM_TPINFO(mindrag) },
{ 0x00, 0x5a, PSM_TPINFO(upthresh) },
{ 0x00, 0x5c, PSM_TPINFO(threshold) },
{ 0x00, 0x5d, PSM_TPINFO(jenks) },
{ 0x00, 0x5e, PSM_TPINFO(ztime) },
{ 0x01, 0x2c, PSM_TPINFO(pts) },
{ 0x08, 0x2d, PSM_TPINFO(skipback) }
};
struct psm_softc *sc;
int error, newval, *oldvalp;
const int *tp;
if (arg1 == NULL || arg2 < 0 || arg2 >= nitems(data))
return (EINVAL);
sc = arg1;
tp = data[arg2];
oldvalp = (int *)((intptr_t)sc + tp[TPINFO]);
newval = *oldvalp;
error = sysctl_handle_int(oidp, &newval, 0, req);
if (error != 0)
return (error);
if (newval == *oldvalp)
return (0);
if (newval < 0 || newval > (tp[TPMASK] == 0 ? 255 : 1))
return (EINVAL);
error = trackpoint_command(sc->kbdc, tp[TPMASK] == 0 ? 0x81 : 0x47,
tp[TPLOC], tp[TPMASK] == 0 ? newval : tp[TPMASK]);
if (error != 0)
return (error);
*oldvalp = newval;
return (0);
}
static void
trackpoint_sysctl_create_tree(struct psm_softc *sc)
{
if (sc->tpinfo.sysctl_tree != NULL)
return;
/* Attach extra trackpoint sysctl nodes under hw.psm.trackpoint */
sysctl_ctx_init(&sc->tpinfo.sysctl_ctx);
sc->tpinfo.sysctl_tree = SYSCTL_ADD_NODE(&sc->tpinfo.sysctl_ctx,
SYSCTL_STATIC_CHILDREN(_hw_psm), OID_AUTO, "trackpoint", CTLFLAG_RD,
0, "IBM/Lenovo TrackPoint");
/* hw.psm.trackpoint.sensitivity */
sc->tpinfo.sensitivity = 0x64;
SYSCTL_ADD_PROC(&sc->tpinfo.sysctl_ctx,
SYSCTL_CHILDREN(sc->tpinfo.sysctl_tree), OID_AUTO,
"sensitivity", CTLTYPE_INT|CTLFLAG_RW|CTLFLAG_ANYBODY,
sc, TRACKPOINT_SYSCTL_SENSITIVITY,
trackpoint_sysctl, "I",
"Sensitivity");
/* hw.psm.trackpoint.negative_inertia */
sc->tpinfo.inertia = 0x06;
SYSCTL_ADD_PROC(&sc->tpinfo.sysctl_ctx,
SYSCTL_CHILDREN(sc->tpinfo.sysctl_tree), OID_AUTO,
"negative_inertia", CTLTYPE_INT|CTLFLAG_RW|CTLFLAG_ANYBODY,
sc, TRACKPOINT_SYSCTL_NEGATIVE_INERTIA,
trackpoint_sysctl, "I",
"Negative inertia factor");
/* hw.psm.trackpoint.upper_plateau */
sc->tpinfo.uplateau = 0x61;
SYSCTL_ADD_PROC(&sc->tpinfo.sysctl_ctx,
SYSCTL_CHILDREN(sc->tpinfo.sysctl_tree), OID_AUTO,
"upper_plateau", CTLTYPE_INT|CTLFLAG_RW|CTLFLAG_ANYBODY,
sc, TRACKPOINT_SYSCTL_UPPER_PLATEAU,
trackpoint_sysctl, "I",
"Transfer function upper plateau speed");
/* hw.psm.trackpoint.backup_range */
sc->tpinfo.reach = 0x0a;
SYSCTL_ADD_PROC(&sc->tpinfo.sysctl_ctx,
SYSCTL_CHILDREN(sc->tpinfo.sysctl_tree), OID_AUTO,
"backup_range", CTLTYPE_INT|CTLFLAG_RW|CTLFLAG_ANYBODY,
sc, TRACKPOINT_SYSCTL_BACKUP_RANGE,
trackpoint_sysctl, "I",
"Backup range");
/* hw.psm.trackpoint.drag_hysteresis */
sc->tpinfo.draghys = 0xff;
SYSCTL_ADD_PROC(&sc->tpinfo.sysctl_ctx,
SYSCTL_CHILDREN(sc->tpinfo.sysctl_tree), OID_AUTO,
"drag_hysteresis", CTLTYPE_INT|CTLFLAG_RW|CTLFLAG_ANYBODY,
sc, TRACKPOINT_SYSCTL_DRAG_HYSTERESIS,
trackpoint_sysctl, "I",
"Drag hysteresis");
/* hw.psm.trackpoint.minimum_drag */
sc->tpinfo.mindrag = 0x14;
SYSCTL_ADD_PROC(&sc->tpinfo.sysctl_ctx,
SYSCTL_CHILDREN(sc->tpinfo.sysctl_tree), OID_AUTO,
"minimum_drag", CTLTYPE_INT|CTLFLAG_RW|CTLFLAG_ANYBODY,
sc, TRACKPOINT_SYSCTL_MINIMUM_DRAG,
trackpoint_sysctl, "I",
"Minimum drag");
/* hw.psm.trackpoint.up_threshold */
sc->tpinfo.upthresh = 0xff;
SYSCTL_ADD_PROC(&sc->tpinfo.sysctl_ctx,
SYSCTL_CHILDREN(sc->tpinfo.sysctl_tree), OID_AUTO,
"up_threshold", CTLTYPE_INT|CTLFLAG_RW|CTLFLAG_ANYBODY,
sc, TRACKPOINT_SYSCTL_UP_THRESHOLD,
trackpoint_sysctl, "I",
"Up threshold for release");
/* hw.psm.trackpoint.threshold */
sc->tpinfo.threshold = 0x08;
SYSCTL_ADD_PROC(&sc->tpinfo.sysctl_ctx,
SYSCTL_CHILDREN(sc->tpinfo.sysctl_tree), OID_AUTO,
"threshold", CTLTYPE_INT|CTLFLAG_RW|CTLFLAG_ANYBODY,
sc, TRACKPOINT_SYSCTL_THRESHOLD,
trackpoint_sysctl, "I",
"Threshold");
/* hw.psm.trackpoint.jenks_curvature */
sc->tpinfo.jenks = 0x87;
SYSCTL_ADD_PROC(&sc->tpinfo.sysctl_ctx,
SYSCTL_CHILDREN(sc->tpinfo.sysctl_tree), OID_AUTO,
"jenks_curvature", CTLTYPE_INT|CTLFLAG_RW|CTLFLAG_ANYBODY,
sc, TRACKPOINT_SYSCTL_JENKS_CURVATURE,
trackpoint_sysctl, "I",
"Jenks curvature");
/* hw.psm.trackpoint.z_time */
sc->tpinfo.ztime = 0x26;
SYSCTL_ADD_PROC(&sc->tpinfo.sysctl_ctx,
SYSCTL_CHILDREN(sc->tpinfo.sysctl_tree), OID_AUTO,
"z_time", CTLTYPE_INT|CTLFLAG_RW|CTLFLAG_ANYBODY,
sc, TRACKPOINT_SYSCTL_Z_TIME,
trackpoint_sysctl, "I",
"Z time constant");
/* hw.psm.trackpoint.press_to_select */
sc->tpinfo.pts = 0x00;
SYSCTL_ADD_PROC(&sc->tpinfo.sysctl_ctx,
SYSCTL_CHILDREN(sc->tpinfo.sysctl_tree), OID_AUTO,
"press_to_select", CTLTYPE_INT|CTLFLAG_RW|CTLFLAG_ANYBODY,
sc, TRACKPOINT_SYSCTL_PRESS_TO_SELECT,
trackpoint_sysctl, "I",
"Press to Select");
/* hw.psm.trackpoint.skip_backups */
sc->tpinfo.skipback = 0x00;
SYSCTL_ADD_PROC(&sc->tpinfo.sysctl_ctx,
SYSCTL_CHILDREN(sc->tpinfo.sysctl_tree), OID_AUTO,
"skip_backups", CTLTYPE_INT|CTLFLAG_RW|CTLFLAG_ANYBODY,
sc, TRACKPOINT_SYSCTL_SKIP_BACKUPS,
trackpoint_sysctl, "I",
"Skip backups from drags");
}
static int
enable_trackpoint(KBDC kbdc, struct psm_softc *sc)
{
int id;
if (send_aux_command(kbdc, 0xe1) != PSM_ACK ||
read_aux_data(kbdc) != 0x01)
return (FALSE);
id = read_aux_data(kbdc);
if (id < 0x01)
return (FALSE);
if (sc != NULL)
sc->tphw = id;
if (!trackpoint_support)
return (FALSE);
if (sc != NULL) {
/* Create sysctl tree. */
trackpoint_sysctl_create_tree(sc);
trackpoint_command(kbdc, 0x81, 0x4a, sc->tpinfo.sensitivity);
trackpoint_command(kbdc, 0x81, 0x4d, sc->tpinfo.inertia);
trackpoint_command(kbdc, 0x81, 0x60, sc->tpinfo.uplateau);
trackpoint_command(kbdc, 0x81, 0x57, sc->tpinfo.reach);
trackpoint_command(kbdc, 0x81, 0x58, sc->tpinfo.draghys);
trackpoint_command(kbdc, 0x81, 0x59, sc->tpinfo.mindrag);
trackpoint_command(kbdc, 0x81, 0x5a, sc->tpinfo.upthresh);
trackpoint_command(kbdc, 0x81, 0x5c, sc->tpinfo.threshold);
trackpoint_command(kbdc, 0x81, 0x5d, sc->tpinfo.jenks);
trackpoint_command(kbdc, 0x81, 0x5e, sc->tpinfo.ztime);
if (sc->tpinfo.pts == 0x01)
trackpoint_command(kbdc, 0x47, 0x2c, 0x01);
if (sc->tpinfo.skipback == 0x01)
trackpoint_command(kbdc, 0x47, 0x2d, 0x08);
sc->hw.hwid = id;
sc->hw.buttons = 3;
}
return (TRUE);
}
/* Interlink electronics VersaPad */
static int
enable_versapad(KBDC kbdc, struct psm_softc *sc)
{
2008-04-08 19:09:45 +00:00
int data[3];
set_mouse_resolution(kbdc, PSMD_RES_MEDIUM_HIGH); /* set res. 2 */
set_mouse_sampling_rate(kbdc, 100); /* set rate 100 */
set_mouse_scaling(kbdc, 1); /* set scale 1:1 */
set_mouse_scaling(kbdc, 1); /* set scale 1:1 */
set_mouse_scaling(kbdc, 1); /* set scale 1:1 */
set_mouse_scaling(kbdc, 1); /* set scale 1:1 */
if (get_mouse_status(kbdc, data, 0, 3) < 3) /* get status */
return (FALSE);
if (data[2] != 0xa || data[1] != 0 ) /* rate == 0xa && res. == 0 */
return (FALSE);
set_mouse_scaling(kbdc, 1); /* set scale 1:1 */
return (TRUE); /* PS/2 absolute mode */
}
- Hook up the new locations of the atkbdc(4), atkbd(4) and psm(4) source files after they were repo-copied to sys/dev/atkbdc. The sources of atkbdc(4) and its children were moved to the new location in preparation for adding an EBus front-end to atkbdc(4) for use on sparc64; i.e. in order to not further scatter them over the whole tree which would have been the result of adding atkbdc_ebus.c in e.g. sys/sparc64/ebus. Another reason for the repo-copies was that some of the sources were misfiled, e.g. sys/isa/atkbd_isa.c wasn't ISA-specific at all but for hanging atkbd(4) off of atkbdc(4) and was renamed to atkbd_atkbdc.c accordingly. Most of sys/isa/psm.c, i.e. expect for its PSMC PNP part, also isn't ISA-specific. - Separate the parts of atkbdc_isa.c which aren't actually ISA-specific but are shareable between different atkbdc(4) bus front-ends into atkbdc_subr.c (repo-copied from atkbdc_isa.c). While here use bus_generic_rl_alloc_resource() and bus_generic_rl_release_resource() respectively in atkbdc_isa.c instead of rolling own versions. - Add sparc64 MD bits to atkbdc(4) and atkbd(4) and an EBus front-end for atkbdc(4). PS/2 controllers and input devices are used on a couple of Sun OEM boards and occur on either the EBus or the ISA bus. Depending on the board it's either the only on-board mean to connect a keyboard and mouse or an alternative to either RS232 or USB devices. - Wrap the PSMC PNP part of psm.c in #ifdef DEV_ISA so it can be compiled without isa(4) (e.g. for EBus-only machines). This ISA-specific part isn't separated into its own source file, yet, as it requires more work than was feasible for 6.0 in order to do it in a clean way. Actually philip@ is working on a rewrite of psm(4) so a more comprehensive clean-up and separation of hardware dependent and independent parts is expected to happen after 6.0. Tested on: i386, sparc64 (AX1105, AXe and AXi boards) Reviewed by: philip
2005-06-10 20:56:38 +00:00
/*
* Return true if 'now' is earlier than (start + (secs.usecs)).
* Now may be NULL and the function will fetch the current time from
* getmicrouptime(), or a cached 'now' can be passed in.
* All values should be numbers derived from getmicrouptime().
*/
static int
timeelapsed(start, secs, usecs, now)
const struct timeval *start, *now;
int secs, usecs;
{
struct timeval snow, tv;
/* if there is no 'now' passed in, the get it as a convience. */
if (now == NULL) {
getmicrouptime(&snow);
now = &snow;
}
2008-04-08 19:09:45 +00:00
- Hook up the new locations of the atkbdc(4), atkbd(4) and psm(4) source files after they were repo-copied to sys/dev/atkbdc. The sources of atkbdc(4) and its children were moved to the new location in preparation for adding an EBus front-end to atkbdc(4) for use on sparc64; i.e. in order to not further scatter them over the whole tree which would have been the result of adding atkbdc_ebus.c in e.g. sys/sparc64/ebus. Another reason for the repo-copies was that some of the sources were misfiled, e.g. sys/isa/atkbd_isa.c wasn't ISA-specific at all but for hanging atkbd(4) off of atkbdc(4) and was renamed to atkbd_atkbdc.c accordingly. Most of sys/isa/psm.c, i.e. expect for its PSMC PNP part, also isn't ISA-specific. - Separate the parts of atkbdc_isa.c which aren't actually ISA-specific but are shareable between different atkbdc(4) bus front-ends into atkbdc_subr.c (repo-copied from atkbdc_isa.c). While here use bus_generic_rl_alloc_resource() and bus_generic_rl_release_resource() respectively in atkbdc_isa.c instead of rolling own versions. - Add sparc64 MD bits to atkbdc(4) and atkbd(4) and an EBus front-end for atkbdc(4). PS/2 controllers and input devices are used on a couple of Sun OEM boards and occur on either the EBus or the ISA bus. Depending on the board it's either the only on-board mean to connect a keyboard and mouse or an alternative to either RS232 or USB devices. - Wrap the PSMC PNP part of psm.c in #ifdef DEV_ISA so it can be compiled without isa(4) (e.g. for EBus-only machines). This ISA-specific part isn't separated into its own source file, yet, as it requires more work than was feasible for 6.0 in order to do it in a clean way. Actually philip@ is working on a rewrite of psm(4) so a more comprehensive clean-up and separation of hardware dependent and independent parts is expected to happen after 6.0. Tested on: i386, sparc64 (AX1105, AXe and AXi boards) Reviewed by: philip
2005-06-10 20:56:38 +00:00
tv.tv_sec = secs;
tv.tv_usec = usecs;
timevaladd(&tv, start);
return (timevalcmp(&tv, now, <));
}
static int
psmresume(device_t dev)
{
2008-04-08 19:09:45 +00:00
struct psm_softc *sc = device_get_softc(dev);
int unit = device_get_unit(dev);
int err;
2008-04-08 19:09:45 +00:00
VLOG(2, (LOG_NOTICE, "psm%d: system resume hook called.\n", unit));
if ((sc->config &
(PSM_CONFIG_HOOKRESUME | PSM_CONFIG_INITAFTERSUSPEND)) == 0)
2008-04-08 19:09:45 +00:00
return (0);
- Add Support for the following PS/2 mice: - Microsoft IntelliMouse Explorer: 2 buttons on top, 2 side buttons and a wheel which also acts as the middle button. The mouse is recognized as "IntelliMouse Explorer". - Genius NetScroll Optical: 2 buttons on top, 2 side buttons and a wheel which also acts as the middle button. The mouse is recognized as "NetMouse/NetScroll Optical". - MouseSystems SmartScroll Mouse (OEM from Genius?): 3 buttons on top, 1 side button and a wheel. The mouse is recognized as Genius "NetScroll". - IBM ScrollPoint: 2 buttons on top and a stick between the buttons. The stick can perform "horizontal scroll" in W*ndows environment. The horizontal movement of the stick is detected. It is currently mapped to the Z axis movement in the same way as the first wheel. The mouse is recognized as "MouseMan+", as it is considered to be a variation of MouseMan. - A4 Tech 4D and 4D+ mice. These mice have two wheels! The movement of the second wheel is reported as the Z axis movement in the same way as the first wheel. These mice are recognized as "4D Mouse" and "4D+ Mouse". - Tweak IntelliMouse support code a bit so that less-than-compatible wheel mice can work properly with the psm driver. - Add driver configuration flags which correspond to the kernel options PSM_HOOKRESUME and PSM_RESETAFTERSUSPEND, so that we don't need to recompile the kernel when we need these functions. - Properly keep track of the irq resource. - Add a watchdog timer in case interrupts are lost (experimental). - Add `detach' function (experimental).
2000-03-18 15:21:40 +00:00
2008-04-08 19:09:45 +00:00
err = reinitialize(sc, sc->config & PSM_CONFIG_INITAFTERSUSPEND);
2008-04-08 19:09:45 +00:00
if ((sc->state & PSM_ASLP) && !(sc->state & PSM_VALID)) {
/*
* Release the blocked process; it must be notified that
* the device cannot be accessed anymore.
*/
sc->state &= ~PSM_ASLP;
wakeup(sc);
}
2008-04-08 19:09:45 +00:00
VLOG(2, (LOG_DEBUG, "psm%d: system resume hook exiting.\n", unit));
2008-04-08 19:09:45 +00:00
return (err);
}
DRIVER_MODULE(psm, atkbdc, psm_driver, psm_devclass, 0, 0);
- Hook up the new locations of the atkbdc(4), atkbd(4) and psm(4) source files after they were repo-copied to sys/dev/atkbdc. The sources of atkbdc(4) and its children were moved to the new location in preparation for adding an EBus front-end to atkbdc(4) for use on sparc64; i.e. in order to not further scatter them over the whole tree which would have been the result of adding atkbdc_ebus.c in e.g. sys/sparc64/ebus. Another reason for the repo-copies was that some of the sources were misfiled, e.g. sys/isa/atkbd_isa.c wasn't ISA-specific at all but for hanging atkbd(4) off of atkbdc(4) and was renamed to atkbd_atkbdc.c accordingly. Most of sys/isa/psm.c, i.e. expect for its PSMC PNP part, also isn't ISA-specific. - Separate the parts of atkbdc_isa.c which aren't actually ISA-specific but are shareable between different atkbdc(4) bus front-ends into atkbdc_subr.c (repo-copied from atkbdc_isa.c). While here use bus_generic_rl_alloc_resource() and bus_generic_rl_release_resource() respectively in atkbdc_isa.c instead of rolling own versions. - Add sparc64 MD bits to atkbdc(4) and atkbd(4) and an EBus front-end for atkbdc(4). PS/2 controllers and input devices are used on a couple of Sun OEM boards and occur on either the EBus or the ISA bus. Depending on the board it's either the only on-board mean to connect a keyboard and mouse or an alternative to either RS232 or USB devices. - Wrap the PSMC PNP part of psm.c in #ifdef DEV_ISA so it can be compiled without isa(4) (e.g. for EBus-only machines). This ISA-specific part isn't separated into its own source file, yet, as it requires more work than was feasible for 6.0 in order to do it in a clean way. Actually philip@ is working on a rewrite of psm(4) so a more comprehensive clean-up and separation of hardware dependent and independent parts is expected to happen after 6.0. Tested on: i386, sparc64 (AX1105, AXe and AXi boards) Reviewed by: philip
2005-06-10 20:56:38 +00:00
#ifdef DEV_ISA
/*
* This sucks up assignments from PNPBIOS and ACPI.
*/
/*
* When the PS/2 mouse device is reported by ACPI or PnP BIOS, it may
* appear BEFORE the AT keyboard controller. As the PS/2 mouse device
* can be probed and attached only after the AT keyboard controller is
* attached, we shall quietly reserve the IRQ resource for later use.
* If the PS/2 mouse device is reported to us AFTER the keyboard controller,
* copy the IRQ resource to the PS/2 mouse device instance hanging
* under the keyboard controller, then probe and attach it.
*/
static devclass_t psmcpnp_devclass;
static device_probe_t psmcpnp_probe;
static device_attach_t psmcpnp_attach;
static device_method_t psmcpnp_methods[] = {
DEVMETHOD(device_probe, psmcpnp_probe),
DEVMETHOD(device_attach, psmcpnp_attach),
2008-04-08 19:09:45 +00:00
{ 0, 0 }
};
static driver_t psmcpnp_driver = {
PSMCPNP_DRIVER_NAME,
psmcpnp_methods,
1, /* no softc */
};
static struct isa_pnp_id psmcpnp_ids[] = {
{ 0x030fd041, "PS/2 mouse port" }, /* PNP0F03 */
{ 0x0e0fd041, "PS/2 mouse port" }, /* PNP0F0E */
{ 0x120fd041, "PS/2 mouse port" }, /* PNP0F12 */
{ 0x130fd041, "PS/2 mouse port" }, /* PNP0F13 */
{ 0x1303d041, "PS/2 port" }, /* PNP0313, XXX */
{ 0x02002e4f, "Dell PS/2 mouse port" }, /* Lat. X200, Dell */
{ 0x0002a906, "ALPS Glide Point" }, /* ALPS Glide Point */
{ 0x80374d24, "IBM PS/2 mouse port" }, /* IBM3780, ThinkPad */
2001-10-03 07:26:28 +00:00
{ 0x81374d24, "IBM PS/2 mouse port" }, /* IBM3781, ThinkPad */
{ 0x0190d94d, "SONY VAIO PS/2 mouse port"}, /* SNY9001, Vaio */
{ 0x0290d94d, "SONY VAIO PS/2 mouse port"}, /* SNY9002, Vaio */
{ 0x0390d94d, "SONY VAIO PS/2 mouse port"}, /* SNY9003, Vaio */
{ 0x0490d94d, "SONY VAIO PS/2 mouse port"}, /* SNY9004, Vaio */
{ 0 }
};
static int
create_a_copy(device_t atkbdc, device_t me)
{
device_t psm;
u_long irq;
/* find the PS/2 mouse device instance under the keyboard controller */
psm = device_find_child(atkbdc, PSM_DRIVER_NAME,
2008-04-08 19:09:45 +00:00
device_get_unit(atkbdc));
if (psm == NULL)
2008-04-08 19:09:45 +00:00
return (ENXIO);
if (device_get_state(psm) != DS_NOTPRESENT)
2008-04-08 19:09:45 +00:00
return (0);
/* move our resource to the found device */
irq = bus_get_resource_start(me, SYS_RES_IRQ, 0);
bus_delete_resource(me, SYS_RES_IRQ, 0);
bus_set_resource(psm, SYS_RES_IRQ, KBDC_RID_AUX, irq, 1);
/* ...then probe and attach it */
2008-04-08 19:09:45 +00:00
return (device_probe_and_attach(psm));
}
static int
psmcpnp_probe(device_t dev)
{
struct resource *res;
u_long irq;
int rid;
if (ISA_PNP_PROBE(device_get_parent(dev), dev, psmcpnp_ids))
2008-04-08 19:09:45 +00:00
return (ENXIO);
/*
* The PnP BIOS and ACPI are supposed to assign an IRQ (12)
* to the PS/2 mouse device node. But, some buggy PnP BIOS
* declares the PS/2 mouse device node without an IRQ resource!
* If this happens, we shall refer to device hints.
* If we still don't find it there, use a hardcoded value... XXX
*/
rid = 0;
irq = bus_get_resource_start(dev, SYS_RES_IRQ, rid);
if (irq <= 0) {
if (resource_long_value(PSM_DRIVER_NAME,
2008-04-08 19:09:45 +00:00
device_get_unit(dev),"irq", &irq) != 0)
irq = 12; /* XXX */
device_printf(dev, "irq resource info is missing; "
2008-04-08 19:09:45 +00:00
"assuming irq %ld\n", irq);
bus_set_resource(dev, SYS_RES_IRQ, rid, irq, 1);
}
res = bus_alloc_resource_any(dev, SYS_RES_IRQ, &rid, 0);
bus_release_resource(dev, SYS_RES_IRQ, rid, res);
/* keep quiet */
if (!bootverbose)
device_quiet(dev);
return ((res == NULL) ? ENXIO : 0);
}
static int
psmcpnp_attach(device_t dev)
{
device_t atkbdc;
/* find the keyboard controller, which may be on acpi* or isa* bus */
atkbdc = devclass_get_device(devclass_find(ATKBDC_DRIVER_NAME),
2008-04-08 19:09:45 +00:00
device_get_unit(dev));
if ((atkbdc != NULL) && (device_get_state(atkbdc) == DS_ATTACHED))
create_a_copy(atkbdc, dev);
2008-04-08 19:09:45 +00:00
return (0);
}
DRIVER_MODULE(psmcpnp, isa, psmcpnp_driver, psmcpnp_devclass, 0, 0);
DRIVER_MODULE(psmcpnp, acpi, psmcpnp_driver, psmcpnp_devclass, 0, 0);
- Hook up the new locations of the atkbdc(4), atkbd(4) and psm(4) source files after they were repo-copied to sys/dev/atkbdc. The sources of atkbdc(4) and its children were moved to the new location in preparation for adding an EBus front-end to atkbdc(4) for use on sparc64; i.e. in order to not further scatter them over the whole tree which would have been the result of adding atkbdc_ebus.c in e.g. sys/sparc64/ebus. Another reason for the repo-copies was that some of the sources were misfiled, e.g. sys/isa/atkbd_isa.c wasn't ISA-specific at all but for hanging atkbd(4) off of atkbdc(4) and was renamed to atkbd_atkbdc.c accordingly. Most of sys/isa/psm.c, i.e. expect for its PSMC PNP part, also isn't ISA-specific. - Separate the parts of atkbdc_isa.c which aren't actually ISA-specific but are shareable between different atkbdc(4) bus front-ends into atkbdc_subr.c (repo-copied from atkbdc_isa.c). While here use bus_generic_rl_alloc_resource() and bus_generic_rl_release_resource() respectively in atkbdc_isa.c instead of rolling own versions. - Add sparc64 MD bits to atkbdc(4) and atkbd(4) and an EBus front-end for atkbdc(4). PS/2 controllers and input devices are used on a couple of Sun OEM boards and occur on either the EBus or the ISA bus. Depending on the board it's either the only on-board mean to connect a keyboard and mouse or an alternative to either RS232 or USB devices. - Wrap the PSMC PNP part of psm.c in #ifdef DEV_ISA so it can be compiled without isa(4) (e.g. for EBus-only machines). This ISA-specific part isn't separated into its own source file, yet, as it requires more work than was feasible for 6.0 in order to do it in a clean way. Actually philip@ is working on a rewrite of psm(4) so a more comprehensive clean-up and separation of hardware dependent and independent parts is expected to happen after 6.0. Tested on: i386, sparc64 (AX1105, AXe and AXi boards) Reviewed by: philip
2005-06-10 20:56:38 +00:00
#endif /* DEV_ISA */