d/freebsd-dev
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
558ef6d080
freebsd-dev/config/kernel.m4

568 lines
15 KiB
Plaintext
Raw Normal View History

Add build system Add autoconf style build infrastructure to the ZFS tree. This includes autogen.sh, configure.ac, m4 macros, some scripts/*, and makefiles for all the core ZFS components.
2010-08-26 18:22:58 +00:00
dnl #
dnl # Default ZFS kernel configuration
dnl #
AC_DEFUN([ZFS_AC_CONFIG_KERNEL], [
ZFS_AC_KERNEL
ZFS_AC_SPL
Make configure builtin-aware. This patch adds a new option to configure: --enable-linux-builtin. When this option is used, the following happens: - Compilation of kernel modules is disabled. - A failure to find UTS_RELEASE is followed by a suggestion to run "make prepare" on the kernel source tree. This patch also adds a new test which tries to compile an empty module as a basic toolchain sanity test. If it fails and the option was specified, the error is followed by a suggestion to run "make scripts" on the kernel source tree. Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Issue #851
2012-07-17 08:36:43 +00:00
ZFS_AC_TEST_MODULE
Add build system Add autoconf style build infrastructure to the ZFS tree. This includes autogen.sh, configure.ac, m4 macros, some scripts/*, and makefiles for all the core ZFS components.
2010-08-26 18:22:58 +00:00
ZFS_AC_KERNEL_CONFIG
ZFS_AC_KERNEL_BDEV_BLOCK_DEVICE_OPERATIONS
ZFS_AC_KERNEL_TYPE_FMODE_T
ZFS_AC_KERNEL_KOBJ_NAME_LEN
Move partition scanning from userspace to module. Currently, zpool online -e (dynamic vdev expansion) doesn't work on whole disks because we're invoking ioctl(BLKRRPART) from userspace while ZFS still has a partition open on the disk, which results in EBUSY. This patch moves the BLKRRPART invocation from the zpool utility to the module. Specifically, this is done just before opening the device in vdev_disk_open() which is called inside vdev_reopen(). This requires jumping through some hoops to get to the disk device from the partition device, and to make sure we can still open the partition after the BLKRRPART call. Note that this new code path is triggered on dynamic vdev expansion only; other actions, like creating a new pool, are unchanged and still call BLKRRPART from userspace. This change also depends on API changes which are available in 2.6.37 and latter kernels. The build system has been updated to detect this, but there is no compatibility mode for older kernels. This means that online expansion will NOT be available in older kernels. However, it will still be possible to expand the vdev offline. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #808
2012-07-11 13:06:32 +00:00
ZFS_AC_KERNEL_3ARG_BLKDEV_GET
Linux 2.6.38 compat, blkdev_get_by_path() The open_bdev_exclusive() function has been replaced (again) by the more generic blkdev_get_by_path() function. Additionally, the counterpart function close_bdev_exclusive() has been replaced by blkdev_put(). Because these functions are more generic versions of the functions they replaced the compatibility macro must add the FMODE_EXCL mask to ensure they are exclusive. Closes #114
2011-02-22 22:55:35 +00:00
ZFS_AC_KERNEL_BLKDEV_GET_BY_PATH
Add build system Add autoconf style build infrastructure to the ZFS tree. This includes autogen.sh, configure.ac, m4 macros, some scripts/*, and makefiles for all the core ZFS components.
2010-08-26 18:22:58 +00:00
ZFS_AC_KERNEL_OPEN_BDEV_EXCLUSIVE
ZFS_AC_KERNEL_INVALIDATE_BDEV_ARGS
ZFS_AC_KERNEL_BDEV_LOGICAL_BLOCK_SIZE
ZFS_AC_KERNEL_BIO_EMPTY_BARRIER
Add FAILFAST support ZFS works best when it is notified as soon as possible when a device failure occurs. This allows it to immediately start any recovery actions which may be needed. In theory Linux supports a flag which can be set on bio's called FAILFAST which provides this quick notification by disabling the retry logic in the lower scsi layers. That's the theory at least. In practice is turns out that while the flag exists you oddly have to set it with the BIO_RW_AHEAD flag. And even when it's set it you may get retries in the low level drivers decides that's the right behavior, or if you don't get the right error codes reported to the scsi midlayer. Unfortunately, without additional kernels patchs there's not much which can be done to improve this. Basically, this just means that it may take 2-3 minutes before a ZFS is notified properly that a device has failed. This can be improved and I suspect I'll be submitting patches upstream to handle this.
2010-10-01 17:57:56 +00:00
ZFS_AC_KERNEL_BIO_FAILFAST
Linux 2.6.36 compat, use REQ_FAILFAST_MASK As of linux-2.6.36 the BIO_RW_FAILFAST and REQ_FAILFAST flags have been unified under the REQ_* names. These flags always had to be kept in-sync so this is a nice step forward, unfortunately it means we need to be careful to only use the new unified flags when the BIO_RW_* flags are not defined. Additional autoconf checks were added for this and if it is ever unclear which method to use no flags are set. This is safe but may result in longer delays before a disk is failed. Perferred interface for setting FAILFAST on a bio: 2.6.12-2.6.27: BIO_RW_FAILFAST 2.6.28-2.6.35: BIO_RW_FAILFAST_{DEV|TRANSPORT|DRIVER} 2.6.36-2.6.xx: REQ_FAILFAST_{DEV|TRANSPORT|DRIVER}
2010-11-10 22:40:38 +00:00
ZFS_AC_KERNEL_BIO_FAILFAST_DTD
ZFS_AC_KERNEL_REQ_FAILFAST_MASK
Add build system Add autoconf style build infrastructure to the ZFS tree. This includes autogen.sh, configure.ac, m4 macros, some scripts/*, and makefiles for all the core ZFS components.
2010-08-26 18:22:58 +00:00
ZFS_AC_KERNEL_BIO_END_IO_T_ARGS
Linux 2.6.36 compat, synchronous bio flag The name of the flag used to mark a bio as synchronous has changed again in the 2.6.36 kernel due to the unification of the BIO_RW_* and REQ_* flags. The new flag is called REQ_SYNC. To simplify checking this flag I have introduced the vdev_disk_dio_is_sync() helper function. Based on the results of several new autoconf tests it uses the correct mask to check for a synchronous bio. Preferred interface for flagging a synchronous bio: 2.6.12-2.6.29: BIO_RW_SYNC 2.6.30-2.6.35: BIO_RW_SYNCIO 2.6.36-2.6.xx: REQ_SYNC
2010-11-10 23:49:40 +00:00
ZFS_AC_KERNEL_BIO_RW_SYNC
Add build system Add autoconf style build infrastructure to the ZFS tree. This includes autogen.sh, configure.ac, m4 macros, some scripts/*, and makefiles for all the core ZFS components.
2010-08-26 18:22:58 +00:00
ZFS_AC_KERNEL_BIO_RW_SYNCIO
Linux 2.6.36 compat, synchronous bio flag The name of the flag used to mark a bio as synchronous has changed again in the 2.6.36 kernel due to the unification of the BIO_RW_* and REQ_* flags. The new flag is called REQ_SYNC. To simplify checking this flag I have introduced the vdev_disk_dio_is_sync() helper function. Based on the results of several new autoconf tests it uses the correct mask to check for a synchronous bio. Preferred interface for flagging a synchronous bio: 2.6.12-2.6.29: BIO_RW_SYNC 2.6.30-2.6.35: BIO_RW_SYNCIO 2.6.36-2.6.xx: REQ_SYNC
2010-11-10 23:49:40 +00:00
ZFS_AC_KERNEL_REQ_SYNC
Add build system Add autoconf style build infrastructure to the ZFS tree. This includes autogen.sh, configure.ac, m4 macros, some scripts/*, and makefiles for all the core ZFS components.
2010-08-26 18:22:58 +00:00
ZFS_AC_KERNEL_BLK_END_REQUEST
Fix synchronicity for ZVOLs. zvol_write() assumes that the write request must be written to stable storage if rq_is_sync() is true. Unfortunately, this assumption is incorrect. Indeed, "sync" does *not* mean what we think it means in the context of the Linux block layer. This is well explained in linux/fs.h: WRITE: A normal async write. Device will be plugged. WRITE_SYNC: Synchronous write. Identical to WRITE, but passes down the hint that someone will be waiting on this IO shortly. WRITE_FLUSH: Like WRITE_SYNC but with preceding cache flush. WRITE_FUA: Like WRITE_SYNC but data is guaranteed to be on non-volatile media on completion. In other words, SYNC does not *mean* that the write must be on stable storage on completion. It just means that someone is waiting on us to complete the write request. Thus triggering a ZIL commit for each SYNC write request on a ZVOL is unnecessary and harmful for performance. To make matters worse, ZVOL users have no way to express that they actually want data to be written to stable storage, which means the ZIL is broken for ZVOLs. The request for stable storage is expressed by the FUA flag, so we must commit the ZIL after the write if the FUA flag is set. In addition, we must commit the ZIL before the write if the FLUSH flag is set. Also, we must inform the block layer that we actually support FLUSH and FUA. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2011-09-05 09:11:38 +00:00
ZFS_AC_KERNEL_BLK_QUEUE_FLUSH
Improve ZVOL queue behavior. The Linux block device queue subsystem exposes a number of configurable settings described in Linux block/blk-settings.c. The defaults for these settings are tuned for hard drives, and are not optimized for ZVOLs. Proper configuration of these options would allow upper layers (I/O scheduler) to take better decisions about write merging and ordering. Detailed rationale: - max_hw_sectors is set to unlimited (UINT_MAX). zvol_write() is able to handle writes of any size, so there's no reason to impose a limit. Let the upper layer decide. - max_segments and max_segment_size are set to unlimited. zvol_write() will copy the requests' contents into a dbuf anyway, so the number and size of the segments are irrelevant. Let the upper layer decide. - physical_block_size and io_opt are set to the ZVOL's block size. This has the potential to somewhat alleviate issue #361 for ZVOLs, by warning the upper layers that writes smaller than the volume's block size will be slow. - The NONROT flag is set to indicate this isn't a rotational device. Although the backing zpool might be composed of rotational devices, the resulting ZVOL often doesn't exhibit the same behavior due to the COW mechanisms used by ZFS. Setting this flag will prevent upper layers from making useless decisions (such as reordering writes) based on incorrect assumptions about the behavior of the ZVOL. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2011-09-05 13:15:45 +00:00
ZFS_AC_KERNEL_BLK_QUEUE_MAX_HW_SECTORS
ZFS_AC_KERNEL_BLK_QUEUE_MAX_SEGMENTS
ZFS_AC_KERNEL_BLK_QUEUE_PHYSICAL_BLOCK_SIZE
ZFS_AC_KERNEL_BLK_QUEUE_IO_OPT
ZFS_AC_KERNEL_BLK_QUEUE_NONROT
Add support for DISCARD to ZVOLs. DISCARD (REQ_DISCARD, BLKDISCARD) is useful for thin provisioning. It allows ZVOL clients to discard (unmap, trim) block ranges from a ZVOL, thus optimizing disk space usage by allowing a ZVOL to shrink instead of just grow. We can't use zfs_space() or zfs_freesp() here, since these functions only work on regular files, not volumes. Fortunately we can use the low-level function dmu_free_long_range() which does exactly what we want. Currently the discard operation is not added to the log. That's not a big deal since losing discard requests cannot result in data corruption. It would however result in disk space usage higher than it should be. Thus adding log support to zvol_discard() is probably a good idea for a future improvement. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2011-09-02 13:23:12 +00:00
ZFS_AC_KERNEL_BLK_QUEUE_DISCARD
Add build system Add autoconf style build infrastructure to the ZFS tree. This includes autogen.sh, configure.ac, m4 macros, some scripts/*, and makefiles for all the core ZFS components.
2010-08-26 18:22:58 +00:00
ZFS_AC_KERNEL_BLK_FETCH_REQUEST
ZFS_AC_KERNEL_BLK_REQUEUE_REQUEST
ZFS_AC_KERNEL_BLK_RQ_BYTES
ZFS_AC_KERNEL_BLK_RQ_POS
ZFS_AC_KERNEL_BLK_RQ_SECTORS
ZFS_AC_KERNEL_GET_DISK_RO
Move partition scanning from userspace to module. Currently, zpool online -e (dynamic vdev expansion) doesn't work on whole disks because we're invoking ioctl(BLKRRPART) from userspace while ZFS still has a partition open on the disk, which results in EBUSY. This patch moves the BLKRRPART invocation from the zpool utility to the module. Specifically, this is done just before opening the device in vdev_disk_open() which is called inside vdev_reopen(). This requires jumping through some hoops to get to the disk device from the partition device, and to make sure we can still open the partition after the BLKRRPART call. Note that this new code path is triggered on dynamic vdev expansion only; other actions, like creating a new pool, are unchanged and still call BLKRRPART from userspace. This change also depends on API changes which are available in 2.6.37 and latter kernels. The build system has been updated to detect this, but there is no compatibility mode for older kernels. This means that online expansion will NOT be available in older kernels. However, it will still be possible to expand the vdev offline. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #808
2012-07-11 13:06:32 +00:00
ZFS_AC_KERNEL_GET_GENDISK
Add build system Add autoconf style build infrastructure to the ZFS tree. This includes autogen.sh, configure.ac, m4 macros, some scripts/*, and makefiles for all the core ZFS components.
2010-08-26 18:22:58 +00:00
ZFS_AC_KERNEL_RQ_IS_SYNC
ZFS_AC_KERNEL_RQ_FOR_EACH_SEGMENT
Set zvol discard_granularity to the volblocksize. Currently, zvols have a discard granularity set to 0, which suggests to the upper layer that discard requests of arbirarily small size and alignment can be made efficiently. In practice however, ZFS does not handle unaligned discard requests efficiently: indeed, it is unable to free a part of a block. It will write zeros to the specified range instead, which is both useless and inefficient (see dnode_free_range). With this patch, zvol block devices expose volblocksize as their discard granularity, so the upper layer is aware that it's not supposed to send discard requests smaller than volblocksize. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #862
2012-08-01 08:29:59 +00:00
ZFS_AC_KERNEL_DISCARD_GRANULARITY
Linux 2.6.35 compat, const struct xattr_handler The const keyword was added to the 'struct xattr_handler' in the generic Linux super_block structure. To handle this we define an appropriate xattr_handler_t typedef which can be used. This was the preferred solution because it keeps the code clean and readable.
2011-02-11 00:16:52 +00:00
ZFS_AC_KERNEL_CONST_XATTR_HANDLER
Linux 2.6.33 compat, get/set xattr callbacks The xattr handler prototypes were sanitized with the idea being that the same handlers could be used for multiple methods. The result of this was the inode type was changes to a dentry, and both the get() and set() hooks had a handler_flags argument added. The list() callback was similiarly effected but no autoconf check was added because we do not use the list() callback.
2011-02-11 18:33:01 +00:00
ZFS_AC_KERNEL_XATTR_HANDLER_GET
ZFS_AC_KERNEL_XATTR_HANDLER_SET
Linux 3.3 compat, sops->show_options() The second argument of sops->show_options() was changed from a 'struct vfsmount *' to a 'struct dentry *'. Add an autoconf check to detect the API change and then conditionally define the expected interface. In either case we are only interested in the zfs_sb_t. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #549
2012-02-02 19:55:48 +00:00
ZFS_AC_KERNEL_SHOW_OPTIONS
Linux 3.1 compat, fops->fsync() The Linux 3.1 kernel updated the fops->fsync() callback yet again. They now pass the requested range and delegate the responsibility for calling filemap_write_and_wait_range() to the callback. In addition imutex is no longer held by the caller and the callback is responsible for taking the lock if required. This commit updates the code to provide a zpl_fsync() function for the updated API. Implementations for the previous two APIs are also maintained for compatibility. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #445
2011-11-10 04:47:59 +00:00
ZFS_AC_KERNEL_FSYNC
Linux 2.6.36 compat, sops->evict_inode() The new prefered inteface for evicting an inode from the inode cache is the ->evict_inode() callback. It replaces both the ->delete_inode() and ->clear_inode() callbacks which were previously used for this.
2011-02-11 21:46:10 +00:00
ZFS_AC_KERNEL_EVICT_INODE
Linux 3.1 compat, super_block->s_shrink The Linux 3.1 kernel has introduced the concept of per-filesystem shrinkers which are directly assoicated with a super block. Prior to this change there was one shared global shrinker. The zfs code relied on being able to call the global shrinker when the arc_meta_limit was exceeded. This would cause the VFS to drop references on a fraction of the dentries in the dcache. The ARC could then safely reclaim the memory used by these entries and honor the arc_meta_limit. Unfortunately, when per-filesystem shrinkers were added the old interfaces were made unavailable. This change adds support to use the new per-filesystem shrinker interface so we can continue to honor the arc_meta_limit. The major benefit of the new interface is that we can now target only the zfs filesystem for dentry and inode pruning. Thus we can minimize any impact on the caching of other filesystems. In the context of making this change several other important issues related to managing the ARC were addressed, they include: * The dnlc_reduce_cache() function which was called by the ARC to drop dentries for the Posix layer was replaced with a generic zfs_prune_t callback. The ZPL layer now registers a callback to drop these dentries removing a layering violation which dates back to the Solaris code. This callback can also be used by other ARC consumers such as Lustre. arc_add_prune_callback() arc_remove_prune_callback() * The arc_reduce_dnlc_percent module option has been changed to arc_meta_prune for clarity. The dnlc functions are specific to Solaris's VFS and have already been largely eliminated already. The replacement tunable now represents the number of bytes the prune callback will request when invoked. * Less aggressively invoke the prune callback. We used to call this whenever we exceeded the arc_meta_limit however that's not strictly correct since it results in over zeleous reclaim of dentries and inodes. It is now only called once the arc_meta_limit is exceeded and every effort has been made to evict other data from the ARC cache. * More promptly manage exceeding the arc_meta_limit. When reading meta data in to the cache if a buffer was unable to be recycled notify the arc_reclaim thread to invoke the required prune. * Added arcstat_prune kstat which is incremented when the ARC is forced to request that a consumer prune its cache. Remember this will only occur when the ARC has no other choice. If it can evict buffers safely without invoking the prune callback it will. * This change is also expected to resolve the unexpect collapses of the ARC cache. This would occur because when exceeded just the arc_meta_limit reclaim presure would be excerted on the arc_c value via arc_shrink(). This effectively shrunk the entire cache when really we just needed to reclaim meta data. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #466 Closes #292
2011-12-22 20:20:43 +00:00
ZFS_AC_KERNEL_NR_CACHED_OBJECTS
ZFS_AC_KERNEL_FREE_CACHED_OBJECTS
Support the fallocate() file operation. Currently only the (FALLOC_FL_PUNCH_HOLE) flag combination is supported, since it's the only one that matches the behavior of zfs_space(). This makes it pretty much useless in its current form, but it's a start. To support other flag combinations we would need to modify zfs_space() to make it more flexible, or emulate the desired functionality in zpl_fallocate(). Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Issue #334
2011-09-02 07:42:07 +00:00
ZFS_AC_KERNEL_FALLOCATE
Linux 3.6 compat, iops->lookup() As of Linux commit 00cd8dd3bf95f2cc8435b4cac01d9995635c6d0b the struct nameidata is no longer passed to iops->lookup. Instead only the inamedata->flags are passed. ZFS like almost all Linux fileystems never made use of this so only the prototype needs to be wrapped for compatibility. Signed-off-by: Yuxuan Shui <yshuiv7@gmail.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Issue #873
2012-10-12 14:41:06 +00:00
ZFS_AC_KERNEL_LOOKUP_NAMEIDATA
Linux 3.6 compat, iops->create() As of Linux commit ebfc3b49a7ac25920cb5be5445f602e51d2ea559 the struct nameidata is no longer passed to iops->create. Instead only the result of (inamedata->flags & LOOKUP_EXCL) is passed. ZFS like almost all Linux fileystems never made use of this so only the prototype needs to be wrapped for compatibility. Signed-off-by: Yuxuan Shui <yshuiv7@gmail.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Issue #873
2012-10-12 15:20:58 +00:00
ZFS_AC_KERNEL_CREATE_NAMEIDATA
Linux 3.5 compat, iops->truncate_range() removed The vmtruncate_range() support has been removed from the kernel in favor of using the fallocate method in the file_operations table. Signed-off-by: Richard Yao <ryao@cs.stonybrook.edu> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Issue #784
2012-07-23 18:11:25 +00:00
ZFS_AC_KERNEL_TRUNCATE_RANGE
Linux 3.3 compat, iops->create()/mkdir()/mknod() The mode argument of iops->create()/mkdir()/mknod() was changed from an 'int' to a 'umode_t'. To prevent a compiler warning an autoconf check was added to detect the API change and then correctly set a zpl_umode_t typedef. There is no functional change. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #701
2012-04-30 19:01:49 +00:00
ZFS_AC_KERNEL_CREATE_UMODE_T
Add .zfs control directory Add support for the .zfs control directory. This was accomplished by leveraging as much of the existing ZFS infrastructure as posible and updating it for Linux as required. The bulk of the core functionality is now all there with the following limitations. *) The .zfs/snapshot directory automount support requires a 2.6.37 or newer kernel. The exception is RHEL6.2 which has backported the d_automount patches. *) Creating/destroying/renaming snapshots with mkdir/rmdir/mv in the .zfs/snapshot directory works as expected. However, this functionality is only available to root until zfs delegations are finished. * mkdir - create a snapshot * rmdir - destroy a snapshot * mv - rename a snapshot The following issues are known defeciences, but we expect them to be addressed by future commits. *) Add automount support for kernels older the 2.6.37. This should be possible using follow_link() which is what Linux did before. *) Accessing the .zfs/snapshot directory via NFS is not yet possible. The majority of the ground work for this is complete. However, finishing this work will require resolving some lingering integration issues with the Linux NFS kernel server. *) The .zfs/shares directory exists but no futher smb functionality has yet been implemented. Contributions-by: Rohan Puri <rohan.puri15@gmail.com> Contributiobs-by: Andrew Barnes <barnes333@gmail.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #173
2011-11-11 07:15:53 +00:00
ZFS_AC_KERNEL_AUTOMOUNT
Linux 3.5 compat, eops->encode_fh() takes inodes The export_operations member ->encode_fh() has been updated to take both the child and parent inodes. This interface used to take the child dentry and a bool describing if the parent is needed. NOTE: While updating this code I noticed that we do not currently cleanly handle the case where we're passed a connectable parent. This code should be audited to make sure we're doing the right thing. Signed-off-by: Richard Yao <ryao@cs.stonybrook.edu> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Issue #784
2012-07-23 17:55:48 +00:00
ZFS_AC_KERNEL_ENCODE_FH_WITH_INODE
Implement .commit_metadata hook for NFS export In order to implement synchronous NFS metadata semantics ZFS needs to provide the .commit_metadata hook. All it takes there is to make sure changes are committed to ZIL. Fortunately zfs_fsync() does just that, so simply calling it from zpl_commit_metadata() does the trick. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #969
2012-09-16 06:03:04 +00:00
ZFS_AC_KERNEL_COMMIT_METADATA
Linux 3.5 compat, end_writeback() changed to clear_inode() The end_writeback() function was changed by moving the call to inode_sync_wait() earlier in to evict(). This effecitvely changes the ordering of the sync but it does not impact the details of the zfs implementation. However, as part of this change end_writeback() was renamed to clear_inode() to reflect the new semantics. This change does impact us and clear_inode() now maps to end_writeback() for kernels prior to 3.5. Signed-off-by: Richard Yao <ryao@cs.stonybrook.edu> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #784
2012-07-23 18:39:25 +00:00
ZFS_AC_KERNEL_CLEAR_INODE
Linux 2.6.28 compat, insert_inode_locked() Added insert_inode_locked() helper function, prior to this most callers used insert_inode_hash(). The older method doesn't check for collisions in the inode_hashtable but it still acceptible for use. Fallback to using insert_inode_hash() when insert_inode_locked() is unavailable.
2011-03-22 16:55:09 +00:00
ZFS_AC_KERNEL_INSERT_INODE_LOCKED
Linux 3.4 compat, d_make_root() replaces d_alloc_root() torvalds/linux@adc0e91ab142abe93f5b0d7980ada8a7676231fe introduced introduced d_make_root() as a replacement for d_alloc_root(). Further commits appear to have removed d_alloc_root() from the Linux source tree. This causes the following failure: error: implicit declaration of function 'd_alloc_root' [-Werror=implicit-function-declaration] To correct this we update the code to use the current d_make_root() interface for readability. Then we introduce an autotools check to determine if d_make_root() is available. If it isn't then we define some compatibility logic which used the older d_alloc_root() interface. Signed-off-by: Richard Yao <ryao@gentoo.org> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #776
2012-06-06 17:08:00 +00:00
ZFS_AC_KERNEL_D_MAKE_ROOT
Implemented NFS export_operations. Implemented the required NFS operations for exporting ZFS datasets using the in-kernel NFS daemon.
2011-04-28 16:35:50 +00:00
ZFS_AC_KERNEL_D_OBTAIN_ALIAS
Fix 'zfs set volsize=N pool/dataset' This change fixes a kernel panic which would occur when resizing a dataset which was not open. The objset_t stored in the zvol_state_t will be set to NULL when the block device is closed. To avoid this issue we pass the correct objset_t as the third arg. The code has also been updated to correctly notify the kernel when the block device capacity changes. For 2.6.28 and newer kernels the capacity change will be immediately detected. For earlier kernels the capacity change will be detected when the device is next opened. This is a known limitation of older kernels. Online ext3 resize test case passes on 2.6.28+ kernels: $ dd if=/dev/zero of=/tmp/zvol bs=1M count=1 seek=1023 $ zpool create tank /tmp/zvol $ zfs create -V 500M tank/zd0 $ mkfs.ext3 /dev/zd0 $ mkdir /mnt/zd0 $ mount /dev/zd0 /mnt/zd0 $ df -h /mnt/zd0 $ zfs set volsize=800M tank/zd0 $ resize2fs /dev/zd0 $ df -h /mnt/zd0 Original-patch-by: Fajar A. Nugraha <github@fajar.net> Closes #68 Closes #84
2011-02-25 07:36:01 +00:00
ZFS_AC_KERNEL_CHECK_DISK_SIZE_CHANGE
Tear down and flush the mmap region The inode eviction should unmap the pages associated with the inode. These pages should also be flushed to disk to avoid the data loss. Therefore, use truncate_setsize() in evict_inode() to release the pagecache. The API truncate_setsize() was added in 2.6.35 kernel. To ensure compatibility with the old kernel, the patch defines its own truncate_setsize function. Signed-off-by: Prasad Joshi <pjoshi@stec-inc.com> Closes #255
2011-06-25 12:30:29 +00:00
ZFS_AC_KERNEL_TRUNCATE_SETSIZE
Linux compat 2.6.39: security_inode_init_security() The security_inode_init_security() function now takes an additional qstr argument which must be passed in from the dentry if available. Passing a NULL is safe when no qstr is available the relevant security checks will just be skipped. Closes #246 Closes #217 Closes #187
2011-05-19 19:47:32 +00:00
ZFS_AC_KERNEL_6ARGS_SECURITY_INODE_INIT_SECURITY
Linux 3.2 compat, security_inode_init_security() The security_inode_init_security() API has been changed to include a filesystem specific callback to write security extended attributes. This was done to support the initialization of multiple LSM xattrs and the EVM xattr. This change updates the code to use the new API when it's available. Otherwise it falls back to the previous implementation. In addition, the ZFS_AC_KERNEL_6ARGS_SECURITY_INODE_INIT_SECURITY autoconf test has been made more rigerous by passing the expected types. This is done to ensure we always properly the detect the correct form for the security_inode_init_security() API. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #516
2012-01-12 21:59:44 +00:00
ZFS_AC_KERNEL_CALLBACK_SECURITY_INODE_INIT_SECURITY
Linux compat 2.6.39: mount_nodev() The .get_sb callback has been replaced by a .mount callback in the file_system_type structure. When using the new interface the caller must now use the mount_nodev() helper. Unfortunately, the new interface no longer passes the vfsmount down to the zfs layers. This poses a problem for the existing implementation because we currently save this pointer in the super block for latter use. It provides our only entry point in to the namespace layer for manipulating certain mount options. This needed to be done originally to allow commands like 'zfs set atime=off tank' to work properly. It also allowed me to keep more of the original Solaris code unmodified. Under Solaris there is a 1-to-1 mapping between a mount point and a file system so this is a fairly natural thing to do. However, under Linux they many be multiple entries in the namespace which reference the same filesystem. Thus keeping a back reference from the filesystem to the namespace is complicated. Rather than introduce some ugly hack to get the vfsmount and continue as before. I'm leveraging this API change to update the ZFS code to do things in a more natural way for Linux. This has the upside that is resolves the compatibility issue for the long term and fixes several other minor bugs which have been reported. This commit updates the code to remove this vfsmount back reference entirely. All modifications to filesystem mount options are now passed in to the kernel via a '-o remount'. This is the expected Linux mechanism and allows the namespace to properly handle any options which apply to it before passing them on to the file system itself. Aside from fixing the compatibility issue, removing the vfsmount has had the benefit of simplifying the code. This change which fairly involved has turned out nicely. Closes #246 Closes #217 Closes #187 Closes #248 Closes #231
2011-05-19 18:44:07 +00:00
ZFS_AC_KERNEL_MOUNT_NODEV
Linux 3.1 compat, super_block->s_shrink The Linux 3.1 kernel has introduced the concept of per-filesystem shrinkers which are directly assoicated with a super block. Prior to this change there was one shared global shrinker. The zfs code relied on being able to call the global shrinker when the arc_meta_limit was exceeded. This would cause the VFS to drop references on a fraction of the dentries in the dcache. The ARC could then safely reclaim the memory used by these entries and honor the arc_meta_limit. Unfortunately, when per-filesystem shrinkers were added the old interfaces were made unavailable. This change adds support to use the new per-filesystem shrinker interface so we can continue to honor the arc_meta_limit. The major benefit of the new interface is that we can now target only the zfs filesystem for dentry and inode pruning. Thus we can minimize any impact on the caching of other filesystems. In the context of making this change several other important issues related to managing the ARC were addressed, they include: * The dnlc_reduce_cache() function which was called by the ARC to drop dentries for the Posix layer was replaced with a generic zfs_prune_t callback. The ZPL layer now registers a callback to drop these dentries removing a layering violation which dates back to the Solaris code. This callback can also be used by other ARC consumers such as Lustre. arc_add_prune_callback() arc_remove_prune_callback() * The arc_reduce_dnlc_percent module option has been changed to arc_meta_prune for clarity. The dnlc functions are specific to Solaris's VFS and have already been largely eliminated already. The replacement tunable now represents the number of bytes the prune callback will request when invoked. * Less aggressively invoke the prune callback. We used to call this whenever we exceeded the arc_meta_limit however that's not strictly correct since it results in over zeleous reclaim of dentries and inodes. It is now only called once the arc_meta_limit is exceeded and every effort has been made to evict other data from the ARC cache. * More promptly manage exceeding the arc_meta_limit. When reading meta data in to the cache if a buffer was unable to be recycled notify the arc_reclaim thread to invoke the required prune. * Added arcstat_prune kstat which is incremented when the ARC is forced to request that a consumer prune its cache. Remember this will only occur when the ARC has no other choice. If it can evict buffers safely without invoking the prune callback it will. * This change is also expected to resolve the unexpect collapses of the ARC cache. This would occur because when exceeded just the arc_meta_limit reclaim presure would be excerted on the arc_c value via arc_shrink(). This effectively shrunk the entire cache when really we just needed to reclaim meta data. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #466 Closes #292
2011-12-22 20:20:43 +00:00
ZFS_AC_KERNEL_SHRINK
Add backing_device_info per-filesystem For a long time now the kernel has been moving away from using the pdflush daemon to write 'old' dirty pages to disk. The primary reason for this is because the pdflush daemon is single threaded and can be a limiting factor for performance. Since pdflush sequentially walks the dirty inode list for each super block any delay in processing can slow down dirty page writeback for all filesystems. The replacement for pdflush is called bdi (backing device info). The bdi system involves creating a per-filesystem control structure each with its own private sets of queues to manage writeback. The advantage is greater parallelism which improves performance and prevents a single filesystem from slowing writeback to the others. For a long time both systems co-existed in the kernel so it wasn't strictly required to implement the bdi scheme. However, as of Linux 2.6.36 kernels the pdflush functionality has been retired. Since ZFS already bypasses the page cache for most I/O this is only an issue for mmap(2) writes which must go through the page cache. Even then adding this missing support for newer kernels was overlooked because there are other mechanisms which can trigger writeback. However, there is one critical case where not implementing the bdi functionality can cause problems. If an application handles a page fault it can enter the balance_dirty_pages() callpath. This will result in the application hanging until the number of dirty pages in the system drops below the dirty ratio. Without a registered backing_device_info for the filesystem the dirty pages will not get written out. Thus the application will hang. As mentioned above this was less of an issue with older kernels because pdflush would eventually write out the dirty pages. This change adds a backing_device_info structure to the zfs_sb_t which is already allocated per-super block. It is then registered when the filesystem mounted and unregistered on unmount. It will not be registered for mounted snapshots which are read-only. This change will result in flush-<pool> thread being dynamically created and destroyed per-mounted filesystem for writeback. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #174
2011-08-02 01:24:40 +00:00
ZFS_AC_KERNEL_BDI
Simplify BDI integration Update the code to use the bdi_setup_and_register() helper to simplify the bdi integration code. The updated code now just registers the bdi during mount and destroys it during unmount. The only complication is that for 2.6.32 - 2.6.33 kernels the helper wasn't available so in these cases the zfs code must provide it. Luckily the bdi_setup_and_register() function is trivial. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #367
2011-11-08 00:39:03 +00:00
ZFS_AC_KERNEL_BDI_SETUP_AND_REGISTER
Linux 3.2 compat: set_nlink() Directly changing inode->i_nlink is deprecated in Linux 3.2 by commit SHA: bfe8684869601dacfcb2cd69ef8cfd9045f62170 Use the new set_nlink() kernel function instead. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes: #462
2011-12-16 21:15:12 +00:00
ZFS_AC_KERNEL_SET_NLINK
Modify vdev_elevator_switch() to use elevator_change() As of Linux 2.6.36 an elevator_change() interface was added. This commit updates vdev_elevator_switch() to use this interface when available, otherwise it falls back to the usermodehelper method. Original-patch-by: foobarz <sysop@xeon.(none)> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #906
2012-08-26 20:38:06 +00:00
ZFS_AC_KERNEL_ELEVATOR_CHANGE
Linux 3.6 compat, sget() As of Linux commit 9249e17fe094d853d1ef7475dd559a2cc7e23d42 the mount flags are now passed to sget() so they can be used when initializing a new superblock. ZFS never uses sget() in this fashion so we can simply pass a zero and add a zpl_sget() compatibility wrapper. Signed-off-by: Yuxuan Shui <yshuiv7@gmail.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Issue #873
2012-10-12 13:40:53 +00:00
ZFS_AC_KERNEL_5ARG_SGET
Add build system Add autoconf style build infrastructure to the ZFS tree. This includes autogen.sh, configure.ac, m4 macros, some scripts/*, and makefiles for all the core ZFS components.
2010-08-26 18:22:58 +00:00
Convert 'if' statements to AS_IF in kernel.m4 The 'if' statements found in kernel.m4 were converted to use the portable alternative provided by autoconf, the AS_IF macro. Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2011-08-24 16:52:16 +00:00
AS_IF([test "$LINUX_OBJ" != "$LINUX"], [
Support custom build directories and move includes One of the neat tricks an autoconf style project is capable of is allow configurion/building in a directory other than the source directory. The major advantage to this is that you can build the project various different ways while making changes in a single source tree. For example, this project is designed to work on various different Linux distributions each of which work slightly differently. This means that changes need to verified on each of those supported distributions perferably before the change is committed to the public git repo. Using nfs and custom build directories makes this much easier. I now have a single source tree in nfs mounted on several different systems each running a supported distribution. When I make a change to the source base I suspect may break things I can concurrently build from the same source on all the systems each in their own subdirectory. wget -c http://github.com/downloads/behlendorf/zfs/zfs-x.y.z.tar.gz tar -xzf zfs-x.y.z.tar.gz cd zfs-x-y-z ------------------------- run concurrently ---------------------- <ubuntu system> <fedora system> <debian system> <rhel6 system> mkdir ubuntu mkdir fedora mkdir debian mkdir rhel6 cd ubuntu cd fedora cd debian cd rhel6 ../configure ../configure ../configure ../configure make make make make make check make check make check make check This change also moves many of the include headers from individual incude/sys directories under the modules directory in to a single top level include directory. This has the advantage of making the build rules cleaner and logically it makes a bit more sense.
2010-09-04 20:26:23 +00:00
KERNELMAKE_PARAMS="$KERNELMAKE_PARAMS O=$LINUX_OBJ"
Convert 'if' statements to AS_IF in kernel.m4 The 'if' statements found in kernel.m4 were converted to use the portable alternative provided by autoconf, the AS_IF macro. Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2011-08-24 16:52:16 +00:00
])
Support custom build directories and move includes One of the neat tricks an autoconf style project is capable of is allow configurion/building in a directory other than the source directory. The major advantage to this is that you can build the project various different ways while making changes in a single source tree. For example, this project is designed to work on various different Linux distributions each of which work slightly differently. This means that changes need to verified on each of those supported distributions perferably before the change is committed to the public git repo. Using nfs and custom build directories makes this much easier. I now have a single source tree in nfs mounted on several different systems each running a supported distribution. When I make a change to the source base I suspect may break things I can concurrently build from the same source on all the systems each in their own subdirectory. wget -c http://github.com/downloads/behlendorf/zfs/zfs-x.y.z.tar.gz tar -xzf zfs-x.y.z.tar.gz cd zfs-x-y-z ------------------------- run concurrently ---------------------- <ubuntu system> <fedora system> <debian system> <rhel6 system> mkdir ubuntu mkdir fedora mkdir debian mkdir rhel6 cd ubuntu cd fedora cd debian cd rhel6 ../configure ../configure ../configure ../configure make make make make make check make check make check make check This change also moves many of the include headers from individual incude/sys directories under the modules directory in to a single top level include directory. This has the advantage of making the build rules cleaner and logically it makes a bit more sense.
2010-09-04 20:26:23 +00:00
AC_SUBST(KERNELMAKE_PARAMS)
Add build system Add autoconf style build infrastructure to the ZFS tree. This includes autogen.sh, configure.ac, m4 macros, some scripts/*, and makefiles for all the core ZFS components.
2010-08-26 18:22:58 +00:00
dnl # -Wall -fno-strict-aliasing -Wstrict-prototypes and other
dnl # compiler options are added by the kernel build system.
Check for -Wno-unused-but-set-variable gcc support Gcc versions 4.3.2 and earlier do not support the compiler flag -Wno-unused-but-set-variable. This can lead to build failures on older Linux platforms such as Debian Lenny. Since this is an optional build argument this changes add a new autoconf check for the option. If it is supported by the installed version of gcc then it is used otherwise it is omited. See commit's 12c1acde76683108441827ae9affba1872f3afe5 and 79713039a2b6e0ed223d141b4a8a8455f282d2f2 for the reason the -Wno-unused-but-set-variable options was originally added.
2011-06-14 18:02:13 +00:00
KERNELCPPFLAGS="$KERNELCPPFLAGS $NO_UNUSED_BUT_SET_VARIABLE"
Add build system Add autoconf style build infrastructure to the ZFS tree. This includes autogen.sh, configure.ac, m4 macros, some scripts/*, and makefiles for all the core ZFS components.
2010-08-26 18:22:58 +00:00
KERNELCPPFLAGS="$KERNELCPPFLAGS -DHAVE_SPL -D_KERNEL"
KERNELCPPFLAGS="$KERNELCPPFLAGS -DTEXT_DOMAIN=\\\"zfs-linux-kernel\\\""
AC_SUBST(KERNELCPPFLAGS)
])
dnl #
dnl # Detect name used for Module.symvers file in kernel
dnl #
AC_DEFUN([ZFS_AC_MODULE_SYMVERS], [
modpost=$LINUX/scripts/Makefile.modpost
AC_MSG_CHECKING([kernel file name for module symbols])
Make configure builtin-aware. This patch adds a new option to configure: --enable-linux-builtin. When this option is used, the following happens: - Compilation of kernel modules is disabled. - A failure to find UTS_RELEASE is followed by a suggestion to run "make prepare" on the kernel source tree. This patch also adds a new test which tries to compile an empty module as a basic toolchain sanity test. If it fails and the option was specified, the error is followed by a suggestion to run "make scripts" on the kernel source tree. Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Issue #851
2012-07-17 08:36:43 +00:00
AS_IF([test "x$enable_linux_builtin" != xyes -a -f "$modpost"], [
Convert 'if' statements to AS_IF in kernel.m4 The 'if' statements found in kernel.m4 were converted to use the portable alternative provided by autoconf, the AS_IF macro. Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2011-08-24 16:52:16 +00:00
AS_IF([grep -q Modules.symvers $modpost], [
Add build system Add autoconf style build infrastructure to the ZFS tree. This includes autogen.sh, configure.ac, m4 macros, some scripts/*, and makefiles for all the core ZFS components.
2010-08-26 18:22:58 +00:00
LINUX_SYMBOLS=Modules.symvers
Convert 'if' statements to AS_IF in kernel.m4 The 'if' statements found in kernel.m4 were converted to use the portable alternative provided by autoconf, the AS_IF macro. Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2011-08-24 16:52:16 +00:00
], [
Add build system Add autoconf style build infrastructure to the ZFS tree. This includes autogen.sh, configure.ac, m4 macros, some scripts/*, and makefiles for all the core ZFS components.
2010-08-26 18:22:58 +00:00
LINUX_SYMBOLS=Module.symvers
Convert 'if' statements to AS_IF in kernel.m4 The 'if' statements found in kernel.m4 were converted to use the portable alternative provided by autoconf, the AS_IF macro. Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2011-08-24 16:52:16 +00:00
])
Make Missing Modules.symvers Fatal Detect early on in configure if the Modules.symvers file is missing. Without this file there will be build failures later and it's best to catch this early and provide a useful error. In this case the most likely problem is the kernel-devel packages are not installed. It may also be possible that they are using an unbuilt custom kernel in which case they must build the kernel first. Closes #127
2011-03-07 21:03:48 +00:00
Convert 'if' statements to AS_IF in kernel.m4 The 'if' statements found in kernel.m4 were converted to use the portable alternative provided by autoconf, the AS_IF macro. Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2011-08-24 16:52:16 +00:00
AS_IF([test ! -f "$LINUX_OBJ/$LINUX_SYMBOLS"], [
Make Missing Modules.symvers Fatal Detect early on in configure if the Modules.symvers file is missing. Without this file there will be build failures later and it's best to catch this early and provide a useful error. In this case the most likely problem is the kernel-devel packages are not installed. It may also be possible that they are using an unbuilt custom kernel in which case they must build the kernel first. Closes #127
2011-03-07 21:03:48 +00:00
AC_MSG_ERROR([
*** Please make sure the kernel devel package for your distribution
*** is installed. If your building with a custom kernel make sure the
*** kernel is configured, built, and the '--with-linux=PATH' configure
*** option refers to the location of the kernel source.])
Convert 'if' statements to AS_IF in kernel.m4 The 'if' statements found in kernel.m4 were converted to use the portable alternative provided by autoconf, the AS_IF macro. Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2011-08-24 16:52:16 +00:00
])
], [
Add build system Add autoconf style build infrastructure to the ZFS tree. This includes autogen.sh, configure.ac, m4 macros, some scripts/*, and makefiles for all the core ZFS components.
2010-08-26 18:22:58 +00:00
LINUX_SYMBOLS=NONE
Convert 'if' statements to AS_IF in kernel.m4 The 'if' statements found in kernel.m4 were converted to use the portable alternative provided by autoconf, the AS_IF macro. Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2011-08-24 16:52:16 +00:00
])
Add build system Add autoconf style build infrastructure to the ZFS tree. This includes autogen.sh, configure.ac, m4 macros, some scripts/*, and makefiles for all the core ZFS components.
2010-08-26 18:22:58 +00:00
AC_MSG_RESULT($LINUX_SYMBOLS)
AC_SUBST(LINUX_SYMBOLS)
])
dnl #
dnl # Detect the kernel to be built against
dnl #
AC_DEFUN([ZFS_AC_KERNEL], [
AC_ARG_WITH([linux],
AS_HELP_STRING([--with-linux=PATH],
[Path to kernel source]),
[kernelsrc="$withval"])
AC_ARG_WITH(linux-obj,
AS_HELP_STRING([--with-linux-obj=PATH],
[Path to kernel build objects]),
[kernelbuild="$withval"])
AC_MSG_CHECKING([kernel source directory])
Convert 'if' statements to AS_IF in kernel.m4 The 'if' statements found in kernel.m4 were converted to use the portable alternative provided by autoconf, the AS_IF macro. Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2011-08-24 16:52:16 +00:00
AS_IF([test -z "$kernelsrc"], [
AS_IF([test -e "/lib/modules/$(uname -r)/source"], [
Prefer /lib/modules/$(uname -r)/ links Preferentially use the /lib/modules/$(uname -r)/source and /lib/modules/$(uname -r)/build links. Only if neither of these links exist fallback to alternate methods for deducing which kernel to build with. This resolves the need to manually specify --with-linux= and --with-linux-obj= on Debian systems.
2011-02-10 22:54:33 +00:00
headersdir="/lib/modules/$(uname -r)/source"
sourcelink=$(readlink -f "$headersdir")
Convert 'if' statements to AS_IF in kernel.m4 The 'if' statements found in kernel.m4 were converted to use the portable alternative provided by autoconf, the AS_IF macro. Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2011-08-24 16:52:16 +00:00
], [test -e "/lib/modules/$(uname -r)/build"], [
Prefer /lib/modules/$(uname -r)/ links Preferentially use the /lib/modules/$(uname -r)/source and /lib/modules/$(uname -r)/build links. Only if neither of these links exist fallback to alternate methods for deducing which kernel to build with. This resolves the need to manually specify --with-linux= and --with-linux-obj= on Debian systems.
2011-02-10 22:54:33 +00:00
headersdir="/lib/modules/$(uname -r)/build"
Add build system Add autoconf style build infrastructure to the ZFS tree. This includes autogen.sh, configure.ac, m4 macros, some scripts/*, and makefiles for all the core ZFS components.
2010-08-26 18:22:58 +00:00
sourcelink=$(readlink -f "$headersdir")
Convert 'if' statements to AS_IF in kernel.m4 The 'if' statements found in kernel.m4 were converted to use the portable alternative provided by autoconf, the AS_IF macro. Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2011-08-24 16:52:16 +00:00
], [
Add build system Add autoconf style build infrastructure to the ZFS tree. This includes autogen.sh, configure.ac, m4 macros, some scripts/*, and makefiles for all the core ZFS components.
2010-08-26 18:22:58 +00:00
sourcelink=$(ls -1d /usr/src/kernels/* \
Convert 'if' statements to AS_IF in kernel.m4 The 'if' statements found in kernel.m4 were converted to use the portable alternative provided by autoconf, the AS_IF macro. Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2011-08-24 16:52:16 +00:00
/usr/src/linux-* \
Add build system Add autoconf style build infrastructure to the ZFS tree. This includes autogen.sh, configure.ac, m4 macros, some scripts/*, and makefiles for all the core ZFS components.
2010-08-26 18:22:58 +00:00
2>/dev/null | grep -v obj | tail -1)
Convert 'if' statements to AS_IF in kernel.m4 The 'if' statements found in kernel.m4 were converted to use the portable alternative provided by autoconf, the AS_IF macro. Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2011-08-24 16:52:16 +00:00
])
Add build system Add autoconf style build infrastructure to the ZFS tree. This includes autogen.sh, configure.ac, m4 macros, some scripts/*, and makefiles for all the core ZFS components.
2010-08-26 18:22:58 +00:00
Convert 'if' statements to AS_IF in kernel.m4 The 'if' statements found in kernel.m4 were converted to use the portable alternative provided by autoconf, the AS_IF macro. Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2011-08-24 16:52:16 +00:00
AS_IF([test -n "$sourcelink" && test -e ${sourcelink}], [
Add build system Add autoconf style build infrastructure to the ZFS tree. This includes autogen.sh, configure.ac, m4 macros, some scripts/*, and makefiles for all the core ZFS components.
2010-08-26 18:22:58 +00:00
kernelsrc=`readlink -f ${sourcelink}`
Convert 'if' statements to AS_IF in kernel.m4 The 'if' statements found in kernel.m4 were converted to use the portable alternative provided by autoconf, the AS_IF macro. Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2011-08-24 16:52:16 +00:00
], [
Add build system Add autoconf style build infrastructure to the ZFS tree. This includes autogen.sh, configure.ac, m4 macros, some scripts/*, and makefiles for all the core ZFS components.
2010-08-26 18:22:58 +00:00
AC_MSG_RESULT([Not found])
AC_MSG_ERROR([
*** Please make sure the kernel devel package for your distribution
*** is installed then try again. If that fails you can specify the
*** location of the kernel source with the '--with-linux=PATH' option.])
Convert 'if' statements to AS_IF in kernel.m4 The 'if' statements found in kernel.m4 were converted to use the portable alternative provided by autoconf, the AS_IF macro. Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2011-08-24 16:52:16 +00:00
])
], [
AS_IF([test "$kernelsrc" = "NONE"], [
Add build system Add autoconf style build infrastructure to the ZFS tree. This includes autogen.sh, configure.ac, m4 macros, some scripts/*, and makefiles for all the core ZFS components.
2010-08-26 18:22:58 +00:00
kernsrcver=NONE
Convert 'if' statements to AS_IF in kernel.m4 The 'if' statements found in kernel.m4 were converted to use the portable alternative provided by autoconf, the AS_IF macro. Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2011-08-24 16:52:16 +00:00
])
])
Add build system Add autoconf style build infrastructure to the ZFS tree. This includes autogen.sh, configure.ac, m4 macros, some scripts/*, and makefiles for all the core ZFS components.
2010-08-26 18:22:58 +00:00
AC_MSG_RESULT([$kernelsrc])
AC_MSG_CHECKING([kernel build directory])
Convert 'if' statements to AS_IF in kernel.m4 The 'if' statements found in kernel.m4 were converted to use the portable alternative provided by autoconf, the AS_IF macro. Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2011-08-24 16:52:16 +00:00
AS_IF([test -z "$kernelbuild"], [
AS_IF([test -e "/lib/modules/$(uname -r)/build"], [
Prefer /lib/modules/$(uname -r)/ links Preferentially use the /lib/modules/$(uname -r)/source and /lib/modules/$(uname -r)/build links. Only if neither of these links exist fallback to alternate methods for deducing which kernel to build with. This resolves the need to manually specify --with-linux= and --with-linux-obj= on Debian systems.
2011-02-10 22:54:33 +00:00
kernelbuild=`readlink -f /lib/modules/$(uname -r)/build`
Convert 'if' statements to AS_IF in kernel.m4 The 'if' statements found in kernel.m4 were converted to use the portable alternative provided by autoconf, the AS_IF macro. Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2011-08-24 16:52:16 +00:00
], [test -d ${kernelsrc}-obj/${target_cpu}/${target_cpu}], [
Add build system Add autoconf style build infrastructure to the ZFS tree. This includes autogen.sh, configure.ac, m4 macros, some scripts/*, and makefiles for all the core ZFS components.
2010-08-26 18:22:58 +00:00
kernelbuild=${kernelsrc}-obj/${target_cpu}/${target_cpu}
Convert 'if' statements to AS_IF in kernel.m4 The 'if' statements found in kernel.m4 were converted to use the portable alternative provided by autoconf, the AS_IF macro. Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2011-08-24 16:52:16 +00:00
], [test -d ${kernelsrc}-obj/${target_cpu}/default], [
When checking for symbol exports, try compiling. This patch adds a new autoconf function: ZFS_LINUX_TRY_COMPILE_SYMBOL. This new function does the following: - Call LINUX_TRY_COMPILE with the specified parameters. - If unsuccessful, return false. - If successful and we're configuring with --enable-linux-builtin, return true. - Else, call CHECK_SYMBOL_EXPORT with the specified parameters and return the result. All calls to CHECK_SYMBOL_EXPORT are converted to LINUX_TRY_COMPILE_SYMBOL so that the tests work even when configuring for builtin on a kernel which doesn't have loadable module support, or hasn't been built yet. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Issue #851
2012-07-25 21:38:58 +00:00
kernelbuild=${kernelsrc}-obj/${target_cpu}/default
Convert 'if' statements to AS_IF in kernel.m4 The 'if' statements found in kernel.m4 were converted to use the portable alternative provided by autoconf, the AS_IF macro. Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2011-08-24 16:52:16 +00:00
], [test -d `dirname ${kernelsrc}`/build-${target_cpu}], [
Add build system Add autoconf style build infrastructure to the ZFS tree. This includes autogen.sh, configure.ac, m4 macros, some scripts/*, and makefiles for all the core ZFS components.
2010-08-26 18:22:58 +00:00
kernelbuild=`dirname ${kernelsrc}`/build-${target_cpu}
Convert 'if' statements to AS_IF in kernel.m4 The 'if' statements found in kernel.m4 were converted to use the portable alternative provided by autoconf, the AS_IF macro. Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2011-08-24 16:52:16 +00:00
], [
Add build system Add autoconf style build infrastructure to the ZFS tree. This includes autogen.sh, configure.ac, m4 macros, some scripts/*, and makefiles for all the core ZFS components.
2010-08-26 18:22:58 +00:00
kernelbuild=${kernelsrc}
Convert 'if' statements to AS_IF in kernel.m4 The 'if' statements found in kernel.m4 were converted to use the portable alternative provided by autoconf, the AS_IF macro. Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2011-08-24 16:52:16 +00:00
])
])
Add build system Add autoconf style build infrastructure to the ZFS tree. This includes autogen.sh, configure.ac, m4 macros, some scripts/*, and makefiles for all the core ZFS components.
2010-08-26 18:22:58 +00:00
AC_MSG_RESULT([$kernelbuild])
AC_MSG_CHECKING([kernel source version])
utsrelease1=$kernelbuild/include/linux/version.h
utsrelease2=$kernelbuild/include/linux/utsrelease.h
utsrelease3=$kernelbuild/include/generated/utsrelease.h
Convert 'if' statements to AS_IF in kernel.m4 The 'if' statements found in kernel.m4 were converted to use the portable alternative provided by autoconf, the AS_IF macro. Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2011-08-24 16:52:16 +00:00
AS_IF([test -r $utsrelease1 && fgrep -q UTS_RELEASE $utsrelease1], [
Add build system Add autoconf style build infrastructure to the ZFS tree. This includes autogen.sh, configure.ac, m4 macros, some scripts/*, and makefiles for all the core ZFS components.
2010-08-26 18:22:58 +00:00
utsrelease=linux/version.h
Convert 'if' statements to AS_IF in kernel.m4 The 'if' statements found in kernel.m4 were converted to use the portable alternative provided by autoconf, the AS_IF macro. Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2011-08-24 16:52:16 +00:00
], [test -r $utsrelease2 && fgrep -q UTS_RELEASE $utsrelease2], [
Add build system Add autoconf style build infrastructure to the ZFS tree. This includes autogen.sh, configure.ac, m4 macros, some scripts/*, and makefiles for all the core ZFS components.
2010-08-26 18:22:58 +00:00
utsrelease=linux/utsrelease.h
Convert 'if' statements to AS_IF in kernel.m4 The 'if' statements found in kernel.m4 were converted to use the portable alternative provided by autoconf, the AS_IF macro. Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2011-08-24 16:52:16 +00:00
], [test -r $utsrelease3 && fgrep -q UTS_RELEASE $utsrelease3], [
Add build system Add autoconf style build infrastructure to the ZFS tree. This includes autogen.sh, configure.ac, m4 macros, some scripts/*, and makefiles for all the core ZFS components.
2010-08-26 18:22:58 +00:00
utsrelease=generated/utsrelease.h
Convert 'if' statements to AS_IF in kernel.m4 The 'if' statements found in kernel.m4 were converted to use the portable alternative provided by autoconf, the AS_IF macro. Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2011-08-24 16:52:16 +00:00
])
Add build system Add autoconf style build infrastructure to the ZFS tree. This includes autogen.sh, configure.ac, m4 macros, some scripts/*, and makefiles for all the core ZFS components.
2010-08-26 18:22:58 +00:00
Convert 'if' statements to AS_IF in kernel.m4 The 'if' statements found in kernel.m4 were converted to use the portable alternative provided by autoconf, the AS_IF macro. Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2011-08-24 16:52:16 +00:00
AS_IF([test "$utsrelease"], [
Add build system Add autoconf style build infrastructure to the ZFS tree. This includes autogen.sh, configure.ac, m4 macros, some scripts/*, and makefiles for all the core ZFS components.
2010-08-26 18:22:58 +00:00
kernsrcver=`(echo "#include <$utsrelease>";
echo "kernsrcver=UTS_RELEASE") |
cpp -I $kernelbuild/include |
grep "^kernsrcver=" | cut -d \" -f 2`
Convert 'if' statements to AS_IF in kernel.m4 The 'if' statements found in kernel.m4 were converted to use the portable alternative provided by autoconf, the AS_IF macro. Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2011-08-24 16:52:16 +00:00
AS_IF([test -z "$kernsrcver"], [
Add build system Add autoconf style build infrastructure to the ZFS tree. This includes autogen.sh, configure.ac, m4 macros, some scripts/*, and makefiles for all the core ZFS components.
2010-08-26 18:22:58 +00:00
AC_MSG_RESULT([Not found])
AC_MSG_ERROR([*** Cannot determine kernel version.])
Convert 'if' statements to AS_IF in kernel.m4 The 'if' statements found in kernel.m4 were converted to use the portable alternative provided by autoconf, the AS_IF macro. Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2011-08-24 16:52:16 +00:00
])
], [
Add build system Add autoconf style build infrastructure to the ZFS tree. This includes autogen.sh, configure.ac, m4 macros, some scripts/*, and makefiles for all the core ZFS components.
2010-08-26 18:22:58 +00:00
AC_MSG_RESULT([Not found])
Make configure builtin-aware. This patch adds a new option to configure: --enable-linux-builtin. When this option is used, the following happens: - Compilation of kernel modules is disabled. - A failure to find UTS_RELEASE is followed by a suggestion to run "make prepare" on the kernel source tree. This patch also adds a new test which tries to compile an empty module as a basic toolchain sanity test. If it fails and the option was specified, the error is followed by a suggestion to run "make scripts" on the kernel source tree. Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Issue #851
2012-07-17 08:36:43 +00:00
if test "x$enable_linux_builtin" != xyes; then
AC_MSG_ERROR([*** Cannot find UTS_RELEASE definition.])
else
AC_MSG_ERROR([
*** Cannot find UTS_RELEASE definition.
*** Please run 'make prepare' inside the kernel source tree.])
fi
Convert 'if' statements to AS_IF in kernel.m4 The 'if' statements found in kernel.m4 were converted to use the portable alternative provided by autoconf, the AS_IF macro. Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2011-08-24 16:52:16 +00:00
])
Add build system Add autoconf style build infrastructure to the ZFS tree. This includes autogen.sh, configure.ac, m4 macros, some scripts/*, and makefiles for all the core ZFS components.
2010-08-26 18:22:58 +00:00
AC_MSG_RESULT([$kernsrcver])
LINUX=${kernelsrc}
LINUX_OBJ=${kernelbuild}
LINUX_VERSION=${kernsrcver}
AC_SUBST(LINUX)
AC_SUBST(LINUX_OBJ)
AC_SUBST(LINUX_VERSION)
ZFS_AC_MODULE_SYMVERS
])
dnl #
dnl # Detect name used for the additional SPL Module.symvers file. If one
dnl # does not exist this is likely because the SPL has been configured
Add '--with-spl-timeout' option When checking for the SPL Module.symvers file, a timeout can now be passed in which will pause the configure step while it waits for this file to be generated. By default, the configure behavior is unchanged as a timeout of 0 is used. If a positive number of seconds is passed, configure will wait that number of seconds for the Module.symvers file before moving on. The main motivation for this change was to support parallel execution of './configure && make' for the SPL and ZFS packages in preparation of supporting DKMS based packages. Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2012-08-08 00:07:55 +00:00
dnl # but not built. The '--with-spl-timeout' option can be passed
dnl # to pause here, waiting for the file to appear from a concurrently
dnl # building SPL package. If the file does not appear in time, a good
dnl # guess is made as to what this file will be named based on what it
dnl # is named in the kernel build products. This file will first be
dnl # used at link time so if the guess is wrong the build will fail
dnl # then. This unfortunately means the ZFS package does not contain a
dnl # reliable mechanism to detect symbols exported by the SPL at
dnl # configure time.
Add build system Add autoconf style build infrastructure to the ZFS tree. This includes autogen.sh, configure.ac, m4 macros, some scripts/*, and makefiles for all the core ZFS components.
2010-08-26 18:22:58 +00:00
dnl #
AC_DEFUN([ZFS_AC_SPL_MODULE_SYMVERS], [
Add '--with-spl-timeout' option When checking for the SPL Module.symvers file, a timeout can now be passed in which will pause the configure step while it waits for this file to be generated. By default, the configure behavior is unchanged as a timeout of 0 is used. If a positive number of seconds is passed, configure will wait that number of seconds for the Module.symvers file before moving on. The main motivation for this change was to support parallel execution of './configure && make' for the SPL and ZFS packages in preparation of supporting DKMS based packages. Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2012-08-08 00:07:55 +00:00
AC_ARG_WITH([spl-timeout],
AS_HELP_STRING([--with-spl-timeout=SECS],
[Wait SECS for symvers file to appear @<:@default=0@:>@]),
[timeout="$withval"], [timeout=0])
Add build system Add autoconf style build infrastructure to the ZFS tree. This includes autogen.sh, configure.ac, m4 macros, some scripts/*, and makefiles for all the core ZFS components.
2010-08-26 18:22:58 +00:00
AC_MSG_CHECKING([spl file name for module symbols])
Add '--with-spl-timeout' option When checking for the SPL Module.symvers file, a timeout can now be passed in which will pause the configure step while it waits for this file to be generated. By default, the configure behavior is unchanged as a timeout of 0 is used. If a positive number of seconds is passed, configure will wait that number of seconds for the Module.symvers file before moving on. The main motivation for this change was to support parallel execution of './configure && make' for the SPL and ZFS packages in preparation of supporting DKMS based packages. Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2012-08-08 00:07:55 +00:00
SPL_SYMBOLS=NONE
while true; do
AS_IF([test -r $SPL_OBJ/Module.symvers], [
SPL_SYMBOLS=Module.symvers
], [test -r $SPL_OBJ/Modules.symvers], [
SPL_SYMBOLS=Modules.symvers
], [test -r $SPL_OBJ/module/Module.symvers], [
SPL_SYMBOLS=Module.symvers
], [test -r $SPL_OBJ/module/Modules.symvers], [
SPL_SYMBOLS=Modules.symvers
])
AS_IF([test $SPL_SYMBOLS != NONE -o $timeout -le 0], [
break;
], [
sleep 1
timeout=$((timeout-1))
])
done
AS_IF([test "$SPL_SYMBOLS" = NONE], [
Add build system Add autoconf style build infrastructure to the ZFS tree. This includes autogen.sh, configure.ac, m4 macros, some scripts/*, and makefiles for all the core ZFS components.
2010-08-26 18:22:58 +00:00
SPL_SYMBOLS=$LINUX_SYMBOLS
Convert 'if' statements to AS_IF in kernel.m4 The 'if' statements found in kernel.m4 were converted to use the portable alternative provided by autoconf, the AS_IF macro. Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2011-08-24 16:52:16 +00:00
])
Add build system Add autoconf style build infrastructure to the ZFS tree. This includes autogen.sh, configure.ac, m4 macros, some scripts/*, and makefiles for all the core ZFS components.
2010-08-26 18:22:58 +00:00
AC_MSG_RESULT([$SPL_SYMBOLS])
AC_SUBST(SPL_SYMBOLS)
])
dnl #
dnl # Detect the SPL module to be built against
dnl #
AC_DEFUN([ZFS_AC_SPL], [
AC_ARG_WITH([spl],
AS_HELP_STRING([--with-spl=PATH],
[Path to spl source]),
[splsrc="$withval"])
AC_ARG_WITH([spl-obj],
AS_HELP_STRING([--with-spl-obj=PATH],
[Path to spl build objects]),
[splbuild="$withval"])
AC_MSG_CHECKING([spl source directory])
Convert 'if' statements to AS_IF in kernel.m4 The 'if' statements found in kernel.m4 were converted to use the portable alternative provided by autoconf, the AS_IF macro. Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2011-08-24 16:52:16 +00:00
AS_IF([test -z "$splsrc"], [
Support building a zfs-modules-dkms sub package This commit adds support for building a zfs-modules-dkms sub package built around Dynamic Kernel Module Support. This is to allow building packages using the DKMS infrastructure which is intended to ease the burden of kernel version changes, upgrades, etc. By default zfs-modules-dkms-* sub package will be built as part of the 'make rpm' target. Alternately, you can build only the DKMS module package using the 'make rpm-dkms' target. Examples: # To build packaged binaries as well as a dkms packages $ ./configure && make rpm # To build only the packaged binary utilities and dkms packages $ ./configure && make rpm-utils rpm-dkms Note: Only the RHEL 5/6, CHAOS 5, and Fedora distributions are supported for building the dkms sub package. Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Issue #535
2012-08-07 20:13:17 +00:00
dnl #
dnl # Look in the standard development package location
dnl #
Add build system Add autoconf style build infrastructure to the ZFS tree. This includes autogen.sh, configure.ac, m4 macros, some scripts/*, and makefiles for all the core ZFS components.
2010-08-26 18:22:58 +00:00
sourcelink=`ls -1d /usr/src/spl-*/${LINUX_VERSION} \
2>/dev/null | tail -1`
Support building a zfs-modules-dkms sub package This commit adds support for building a zfs-modules-dkms sub package built around Dynamic Kernel Module Support. This is to allow building packages using the DKMS infrastructure which is intended to ease the burden of kernel version changes, upgrades, etc. By default zfs-modules-dkms-* sub package will be built as part of the 'make rpm' target. Alternately, you can build only the DKMS module package using the 'make rpm-dkms' target. Examples: # To build packaged binaries as well as a dkms packages $ ./configure && make rpm # To build only the packaged binary utilities and dkms packages $ ./configure && make rpm-utils rpm-dkms Note: Only the RHEL 5/6, CHAOS 5, and Fedora distributions are supported for building the dkms sub package. Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Issue #535
2012-08-07 20:13:17 +00:00
dnl #
dnl # Look in the DKMS source location
dnl #
AS_IF([test -z "$sourcelink" || test ! -e $sourcelink/spl_config.h], [
sourcelink=`ls -1d /var/lib/dkms/spl/*/build \
2>/dev/null | tail -1`
])
dnl #
dnl # Look in the parent directory
dnl #
AS_IF([test -z "$sourcelink" || test ! -e $sourcelink/spl_config.h], [
Add build system Add autoconf style build infrastructure to the ZFS tree. This includes autogen.sh, configure.ac, m4 macros, some scripts/*, and makefiles for all the core ZFS components.
2010-08-26 18:22:58 +00:00
sourcelink=../spl
Convert 'if' statements to AS_IF in kernel.m4 The 'if' statements found in kernel.m4 were converted to use the portable alternative provided by autoconf, the AS_IF macro. Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2011-08-24 16:52:16 +00:00
])
Add build system Add autoconf style build infrastructure to the ZFS tree. This includes autogen.sh, configure.ac, m4 macros, some scripts/*, and makefiles for all the core ZFS components.
2010-08-26 18:22:58 +00:00
Check kernel source directory for SPL ZFS fails to build when SPL is built into the kernel on unless --with-spl=/path/to/kernel/sources is specified. We fallback to the kernel sources directory when SPL is not found elsewhere to resolve that. Signed-off-by: Richard Yao <ryao@cs.stonybrook.edu> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closed #896
2012-08-25 22:32:54 +00:00
dnl #
dnl # Look in the kernel directory
dnl #
AS_IF([test -z "$sourcelink" || test ! -e $sourcelink/spl_config.h], [
sourcelink="$LINUX"
])
Support building a zfs-modules-dkms sub package This commit adds support for building a zfs-modules-dkms sub package built around Dynamic Kernel Module Support. This is to allow building packages using the DKMS infrastructure which is intended to ease the burden of kernel version changes, upgrades, etc. By default zfs-modules-dkms-* sub package will be built as part of the 'make rpm' target. Alternately, you can build only the DKMS module package using the 'make rpm-dkms' target. Examples: # To build packaged binaries as well as a dkms packages $ ./configure && make rpm # To build only the packaged binary utilities and dkms packages $ ./configure && make rpm-utils rpm-dkms Note: Only the RHEL 5/6, CHAOS 5, and Fedora distributions are supported for building the dkms sub package. Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Issue #535
2012-08-07 20:13:17 +00:00
AS_IF([test -e $sourcelink/spl_config.h], [
Add build system Add autoconf style build infrastructure to the ZFS tree. This includes autogen.sh, configure.ac, m4 macros, some scripts/*, and makefiles for all the core ZFS components.
2010-08-26 18:22:58 +00:00
splsrc=`readlink -f ${sourcelink}`
Convert 'if' statements to AS_IF in kernel.m4 The 'if' statements found in kernel.m4 were converted to use the portable alternative provided by autoconf, the AS_IF macro. Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2011-08-24 16:52:16 +00:00
], [
Add build system Add autoconf style build infrastructure to the ZFS tree. This includes autogen.sh, configure.ac, m4 macros, some scripts/*, and makefiles for all the core ZFS components.
2010-08-26 18:22:58 +00:00
AC_MSG_RESULT([Not found])
AC_MSG_ERROR([
*** Please make sure the spl devel package for your distribution
*** is installed then try again. If that fails you can specify the
*** location of the spl source with the '--with-spl=PATH' option.])
Convert 'if' statements to AS_IF in kernel.m4 The 'if' statements found in kernel.m4 were converted to use the portable alternative provided by autoconf, the AS_IF macro. Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2011-08-24 16:52:16 +00:00
])
], [
AS_IF([test "$splsrc" = "NONE"], [
Add build system Add autoconf style build infrastructure to the ZFS tree. This includes autogen.sh, configure.ac, m4 macros, some scripts/*, and makefiles for all the core ZFS components.
2010-08-26 18:22:58 +00:00
splbuild=NONE
splsrcver=NONE
Convert 'if' statements to AS_IF in kernel.m4 The 'if' statements found in kernel.m4 were converted to use the portable alternative provided by autoconf, the AS_IF macro. Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2011-08-24 16:52:16 +00:00
])
])
Add build system Add autoconf style build infrastructure to the ZFS tree. This includes autogen.sh, configure.ac, m4 macros, some scripts/*, and makefiles for all the core ZFS components.
2010-08-26 18:22:58 +00:00
AC_MSG_RESULT([$splsrc])
AC_MSG_CHECKING([spl build directory])
Convert 'if' statements to AS_IF in kernel.m4 The 'if' statements found in kernel.m4 were converted to use the portable alternative provided by autoconf, the AS_IF macro. Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2011-08-24 16:52:16 +00:00
AS_IF([test -z "$splbuild"], [
Support custom build directories and move includes One of the neat tricks an autoconf style project is capable of is allow configurion/building in a directory other than the source directory. The major advantage to this is that you can build the project various different ways while making changes in a single source tree. For example, this project is designed to work on various different Linux distributions each of which work slightly differently. This means that changes need to verified on each of those supported distributions perferably before the change is committed to the public git repo. Using nfs and custom build directories makes this much easier. I now have a single source tree in nfs mounted on several different systems each running a supported distribution. When I make a change to the source base I suspect may break things I can concurrently build from the same source on all the systems each in their own subdirectory. wget -c http://github.com/downloads/behlendorf/zfs/zfs-x.y.z.tar.gz tar -xzf zfs-x.y.z.tar.gz cd zfs-x-y-z ------------------------- run concurrently ---------------------- <ubuntu system> <fedora system> <debian system> <rhel6 system> mkdir ubuntu mkdir fedora mkdir debian mkdir rhel6 cd ubuntu cd fedora cd debian cd rhel6 ../configure ../configure ../configure ../configure make make make make make check make check make check make check This change also moves many of the include headers from individual incude/sys directories under the modules directory in to a single top level include directory. This has the advantage of making the build rules cleaner and logically it makes a bit more sense.
2010-09-04 20:26:23 +00:00
splbuild=${splsrc}
Convert 'if' statements to AS_IF in kernel.m4 The 'if' statements found in kernel.m4 were converted to use the portable alternative provided by autoconf, the AS_IF macro. Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2011-08-24 16:52:16 +00:00
])
Add build system Add autoconf style build infrastructure to the ZFS tree. This includes autogen.sh, configure.ac, m4 macros, some scripts/*, and makefiles for all the core ZFS components.
2010-08-26 18:22:58 +00:00
AC_MSG_RESULT([$splbuild])
AC_MSG_CHECKING([spl source version])
Convert 'if' statements to AS_IF in kernel.m4 The 'if' statements found in kernel.m4 were converted to use the portable alternative provided by autoconf, the AS_IF macro. Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2011-08-24 16:52:16 +00:00
AS_IF([test -r $splbuild/spl_config.h &&
fgrep -q SPL_META_VERSION $splbuild/spl_config.h], [
Add build system Add autoconf style build infrastructure to the ZFS tree. This includes autogen.sh, configure.ac, m4 macros, some scripts/*, and makefiles for all the core ZFS components.
2010-08-26 18:22:58 +00:00
splsrcver=`(echo "#include <spl_config.h>";
Add the release component to headers When the original build system code was added the release component was accidentally omited from the development header install path. This patch adds the missing path component so it's always clear exactly what release your compiling against. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2012-01-18 00:19:43 +00:00
echo "splsrcver=SPL_META_VERSION-SPL_META_RELEASE") |
Fix spl version check The spl_config.h file is checked to determine the spl version. However, the zfs code was looking for it in the source directory and not the build directory.
2010-09-03 03:44:41 +00:00
cpp -I $splbuild |
Add the release component to headers When the original build system code was added the release component was accidentally omited from the development header install path. This patch adds the missing path component so it's always clear exactly what release your compiling against. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2012-01-18 00:19:43 +00:00
grep "^splsrcver=" | tr -d \" | cut -d= -f2`
Convert 'if' statements to AS_IF in kernel.m4 The 'if' statements found in kernel.m4 were converted to use the portable alternative provided by autoconf, the AS_IF macro. Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2011-08-24 16:52:16 +00:00
])
Add build system Add autoconf style build infrastructure to the ZFS tree. This includes autogen.sh, configure.ac, m4 macros, some scripts/*, and makefiles for all the core ZFS components.
2010-08-26 18:22:58 +00:00
Convert 'if' statements to AS_IF in kernel.m4 The 'if' statements found in kernel.m4 were converted to use the portable alternative provided by autoconf, the AS_IF macro. Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2011-08-24 16:52:16 +00:00
AS_IF([test -z "$splsrcver"], [
Add build system Add autoconf style build infrastructure to the ZFS tree. This includes autogen.sh, configure.ac, m4 macros, some scripts/*, and makefiles for all the core ZFS components.
2010-08-26 18:22:58 +00:00
AC_MSG_RESULT([Not found])
AC_MSG_ERROR([
Fix minor autoconf error message inconsistencies A few of the autoconf error messages were inconsistent with the rest of the build system. To be specific, the inconsistencies addressed by this commit are the following: * The second line of the error message for the CONFIG_PREEMPT check was missing it's third asterisk. * A few of the error messages were prefixed by two tabs, whereas the majority of error messages are only prefixed by a single tab. Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2011-08-24 16:23:44 +00:00
*** Cannot determine the version of the spl source.
*** Please prepare the spl source before running this script])
Convert 'if' statements to AS_IF in kernel.m4 The 'if' statements found in kernel.m4 were converted to use the portable alternative provided by autoconf, the AS_IF macro. Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2011-08-24 16:52:16 +00:00
])
Add build system Add autoconf style build infrastructure to the ZFS tree. This includes autogen.sh, configure.ac, m4 macros, some scripts/*, and makefiles for all the core ZFS components.
2010-08-26 18:22:58 +00:00
AC_MSG_RESULT([$splsrcver])
SPL=${splsrc}
SPL_OBJ=${splbuild}
SPL_VERSION=${splsrcver}
AC_SUBST(SPL)
AC_SUBST(SPL_OBJ)
AC_SUBST(SPL_VERSION)
ZFS_AC_SPL_MODULE_SYMVERS
])
Make configure builtin-aware. This patch adds a new option to configure: --enable-linux-builtin. When this option is used, the following happens: - Compilation of kernel modules is disabled. - A failure to find UTS_RELEASE is followed by a suggestion to run "make prepare" on the kernel source tree. This patch also adds a new test which tries to compile an empty module as a basic toolchain sanity test. If it fails and the option was specified, the error is followed by a suggestion to run "make scripts" on the kernel source tree. Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Issue #851
2012-07-17 08:36:43 +00:00
dnl #
dnl # Basic toolchain sanity check.
dnl #
AC_DEFUN([ZFS_AC_TEST_MODULE],
[AC_MSG_CHECKING([whether modules can be built])
ZFS_LINUX_TRY_COMPILE([],[],[
AC_MSG_RESULT([yes])
],[
AC_MSG_RESULT([no])
if test "x$enable_linux_builtin" != xyes; then
AC_MSG_ERROR([*** Unable to build an empty module.])
else
AC_MSG_ERROR([
*** Unable to build an empty module.
*** Please run 'make scripts' inside the kernel source tree.])
fi
])
])
Make CONFIG_PREEMPT Fatal Until support is added for preemptible kernels detect this at configure time and make it fatal. Otherwise, it is possible to have a successful build and kernel modules with flakey behavior.
2011-03-07 18:59:26 +00:00
dnl #
dnl # Certain kernel build options are not supported. These must be
dnl # detected at configure time and cause a build failure. Otherwise
dnl # modules may be successfully built that behave incorrectly.
dnl #
Extend CONFIG_DEBUG_LOCK_ALLOC check The CONFIG_DEBUG_LOCK_ALLOC check at configure time was added to detect when mutex_lock() is defined as a GPL-only symbol. However, the check as written only inferred this from this configuration setting, it never actually checked. This change introduces that missing check to prevent false positives. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2012-05-21 19:59:58 +00:00
AC_DEFUN([ZFS_AC_KERNEL_CONFIG], [
AS_IF([test "$ZFS_META_LICENSE" = GPL], [
AC_DEFINE([HAVE_GPL_ONLY_SYMBOLS], [1],
[Define to 1 if licensed under the GPL])
])
ZFS_AC_KERNEL_CONFIG_DEBUG_LOCK_ALLOC
])
dnl #
dnl # Check CONFIG_DEBUG_LOCK_ALLOC
dnl #
dnl # This is typically only set for debug kernels because it comes with
dnl # a performance penalty. However, when it is set it maps the non-GPL
dnl # symbol mutex_lock() to the GPL-only mutex_lock_nested() symbol.
dnl # This will cause a failure at link time which we'd rather know about
dnl # at compile time.
dnl #
dnl # Since we plan to pursue making mutex_lock_nested() a non-GPL symbol
dnl # with the upstream community we add a check to detect this case.
dnl #
AC_DEFUN([ZFS_AC_KERNEL_CONFIG_DEBUG_LOCK_ALLOC], [
ZFS_LINUX_CONFIG([DEBUG_LOCK_ALLOC], [
AC_MSG_CHECKING([whether mutex_lock() is GPL-only])
tmp_flags="$EXTRA_KCFLAGS"
ZFS_LINUX_TRY_COMPILE([
#include <linux/module.h>
#include <linux/mutex.h>
MODULE_LICENSE("$ZFS_META_LICENSE");
],[
struct mutex lock;
mutex_init(&lock);
mutex_lock(&lock);
mutex_unlock(&lock);
],[
AC_MSG_RESULT(no)
],[
AC_MSG_RESULT(yes)
AC_MSG_ERROR([
*** Kernel built with CONFIG_DEBUG_LOCK_ALLOC which is incompatible
Improve CONFIG_DEBUG_LOCK_ALLOC error message The configure script error message for kernels built with CONFIG_DEBUG_LOCK_ALLOC may give the impression that the issue is strictly with license compliance. To avoid confusion add some words indicating that the linking stage will fail if the build continues. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #773
2012-06-05 19:45:37 +00:00
*** with the CDDL license and will prevent the module linking stage
*** from succeeding. You must rebuild your kernel without this
*** option enabled.])
Extend CONFIG_DEBUG_LOCK_ALLOC check The CONFIG_DEBUG_LOCK_ALLOC check at configure time was added to detect when mutex_lock() is defined as a GPL-only symbol. However, the check as written only inferred this from this configuration setting, it never actually checked. This change introduces that missing check to prevent false positives. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2012-05-21 19:59:58 +00:00
])
EXTRA_KCFLAGS="$tmp_flags"
], [])
Add build system Add autoconf style build infrastructure to the ZFS tree. This includes autogen.sh, configure.ac, m4 macros, some scripts/*, and makefiles for all the core ZFS components.
2010-08-26 18:22:58 +00:00
])
dnl #
dnl # ZFS_LINUX_CONFTEST
dnl #
AC_DEFUN([ZFS_LINUX_CONFTEST], [
cat confdefs.h - <<_ACEOF >conftest.c
$1
_ACEOF
])
dnl #
dnl # ZFS_LANG_PROGRAM(C)([PROLOGUE], [BODY])
dnl #
m4_define([ZFS_LANG_PROGRAM], [
$1
int
main (void)
{
dnl Do *not* indent the following line: there may be CPP directives.
dnl Don't move the `;' right after for the same reason.
$2
;
return 0;
}
])
dnl #
dnl # ZFS_LINUX_COMPILE_IFELSE / like AC_COMPILE_IFELSE
dnl #
AC_DEFUN([ZFS_LINUX_COMPILE_IFELSE], [
m4_ifvaln([$1], [ZFS_LINUX_CONFTEST([$1])])
Fake modpost stage for LINUX_COMPILE. Currently, when building a test case, we're compiling an entire Linux module from beginning to end. This includes the MODPOST stage, which generates a "conftest.mod.c" file with some boilerplate module declaration code. This poses a problem when configuring for built-in on kernels which have loadable module support disabled. In this case conftest.mod.c is referencing disabled code, resulting in a compilation failure, thus breaking the tests. This patch fixes the issue by faking the modpost stage when the --enable-linux-builtin option is provided. It does so by forcing the modpost command to be /bin/true, and using an empty conftest.mod.c file. The test module still compiles fine, although the result isn't loadable, but we don't really care at this point. Note it is important to preserve the modpost stage when building out of tree. The ZFS_AC_KERNEL_BLK_END_REQUEST, ZFS_AC_KERNEL_BLK_QUEUE_FLUSH, and ZFS_AC_KERNEL_BLK_RQ_BYTES configure checks all depend on it to identify GPL-only symbols. Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Issue #851
2012-07-16 07:37:38 +00:00
rm -Rf build && mkdir -p build && touch build/conftest.mod.c
Add build system Add autoconf style build infrastructure to the ZFS tree. This includes autogen.sh, configure.ac, m4 macros, some scripts/*, and makefiles for all the core ZFS components.
2010-08-26 18:22:58 +00:00
echo "obj-m := conftest.o" >build/Makefile
Fake modpost stage for LINUX_COMPILE. Currently, when building a test case, we're compiling an entire Linux module from beginning to end. This includes the MODPOST stage, which generates a "conftest.mod.c" file with some boilerplate module declaration code. This poses a problem when configuring for built-in on kernels which have loadable module support disabled. In this case conftest.mod.c is referencing disabled code, resulting in a compilation failure, thus breaking the tests. This patch fixes the issue by faking the modpost stage when the --enable-linux-builtin option is provided. It does so by forcing the modpost command to be /bin/true, and using an empty conftest.mod.c file. The test module still compiles fine, although the result isn't loadable, but we don't really care at this point. Note it is important to preserve the modpost stage when building out of tree. The ZFS_AC_KERNEL_BLK_END_REQUEST, ZFS_AC_KERNEL_BLK_QUEUE_FLUSH, and ZFS_AC_KERNEL_BLK_RQ_BYTES configure checks all depend on it to identify GPL-only symbols. Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Issue #851
2012-07-16 07:37:38 +00:00
modpost_flag=''
test "x$enable_linux_builtin" = xyes && modpost_flag='modpost=true' # fake modpost stage
Add build system Add autoconf style build infrastructure to the ZFS tree. This includes autogen.sh, configure.ac, m4 macros, some scripts/*, and makefiles for all the core ZFS components.
2010-08-26 18:22:58 +00:00
AS_IF(
Fake modpost stage for LINUX_COMPILE. Currently, when building a test case, we're compiling an entire Linux module from beginning to end. This includes the MODPOST stage, which generates a "conftest.mod.c" file with some boilerplate module declaration code. This poses a problem when configuring for built-in on kernels which have loadable module support disabled. In this case conftest.mod.c is referencing disabled code, resulting in a compilation failure, thus breaking the tests. This patch fixes the issue by faking the modpost stage when the --enable-linux-builtin option is provided. It does so by forcing the modpost command to be /bin/true, and using an empty conftest.mod.c file. The test module still compiles fine, although the result isn't loadable, but we don't really care at this point. Note it is important to preserve the modpost stage when building out of tree. The ZFS_AC_KERNEL_BLK_END_REQUEST, ZFS_AC_KERNEL_BLK_QUEUE_FLUSH, and ZFS_AC_KERNEL_BLK_RQ_BYTES configure checks all depend on it to identify GPL-only symbols. Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Issue #851
2012-07-16 07:37:38 +00:00
[AC_TRY_COMMAND(cp conftest.c build && make [$2] -C $LINUX_OBJ EXTRA_CFLAGS="-Werror-implicit-function-declaration $EXTRA_KCFLAGS" $ARCH_UM M=$PWD/build $modpost_flag) >/dev/null && AC_TRY_COMMAND([$3])],
Add build system Add autoconf style build infrastructure to the ZFS tree. This includes autogen.sh, configure.ac, m4 macros, some scripts/*, and makefiles for all the core ZFS components.
2010-08-26 18:22:58 +00:00
[$4],
[_AC_MSG_LOG_CONFTEST m4_ifvaln([$5],[$5])]
)
rm -Rf build
])
dnl #
dnl # ZFS_LINUX_TRY_COMPILE like AC_TRY_COMPILE
dnl #
AC_DEFUN([ZFS_LINUX_TRY_COMPILE],
[ZFS_LINUX_COMPILE_IFELSE(
[AC_LANG_SOURCE([ZFS_LANG_PROGRAM([[$1]], [[$2]])])],
[modules],
[test -s build/conftest.o],
[$3], [$4])
])
dnl #
dnl # ZFS_LINUX_CONFIG
dnl #
AC_DEFUN([ZFS_LINUX_CONFIG],
[AC_MSG_CHECKING([whether Linux was built with CONFIG_$1])
ZFS_LINUX_TRY_COMPILE([
Fix the configure CONFIG_* option detection The latest kernels no longer define AUTOCONF_INCLUDED which was being used to detect the new style autoconf.h kernel configure options. This results in the CONFIG_* checks always failing incorrectly for newer kernels. The fix for this is a simplification of the testing method. Rather than attempting to explicitly include to renamed config header. It is simpler to unconditionally include <linux/module.h> which must pick up the correctly named header. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #320
2011-07-22 21:10:38 +00:00
#include <linux/module.h>
Add build system Add autoconf style build infrastructure to the ZFS tree. This includes autogen.sh, configure.ac, m4 macros, some scripts/*, and makefiles for all the core ZFS components.
2010-08-26 18:22:58 +00:00
],[
#ifndef CONFIG_$1
#error CONFIG_$1 not #defined
#endif
],[
AC_MSG_RESULT([yes])
$2
],[
AC_MSG_RESULT([no])
$3
])
])
dnl #
dnl # ZFS_CHECK_SYMBOL_EXPORT
dnl # check symbol exported or not
dnl #
When checking for symbol exports, try compiling. This patch adds a new autoconf function: ZFS_LINUX_TRY_COMPILE_SYMBOL. This new function does the following: - Call LINUX_TRY_COMPILE with the specified parameters. - If unsuccessful, return false. - If successful and we're configuring with --enable-linux-builtin, return true. - Else, call CHECK_SYMBOL_EXPORT with the specified parameters and return the result. All calls to CHECK_SYMBOL_EXPORT are converted to LINUX_TRY_COMPILE_SYMBOL so that the tests work even when configuring for builtin on a kernel which doesn't have loadable module support, or hasn't been built yet. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Issue #851
2012-07-25 21:38:58 +00:00
AC_DEFUN([ZFS_CHECK_SYMBOL_EXPORT], [
Add build system Add autoconf style build infrastructure to the ZFS tree. This includes autogen.sh, configure.ac, m4 macros, some scripts/*, and makefiles for all the core ZFS components.
2010-08-26 18:22:58 +00:00
grep -q -E '[[[:space:]]]$1[[[:space:]]]' \
$LINUX_OBJ/$LINUX_SYMBOLS 2>/dev/null
rc=$?
When checking for symbol exports, try compiling. This patch adds a new autoconf function: ZFS_LINUX_TRY_COMPILE_SYMBOL. This new function does the following: - Call LINUX_TRY_COMPILE with the specified parameters. - If unsuccessful, return false. - If successful and we're configuring with --enable-linux-builtin, return true. - Else, call CHECK_SYMBOL_EXPORT with the specified parameters and return the result. All calls to CHECK_SYMBOL_EXPORT are converted to LINUX_TRY_COMPILE_SYMBOL so that the tests work even when configuring for builtin on a kernel which doesn't have loadable module support, or hasn't been built yet. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Issue #851
2012-07-25 21:38:58 +00:00
if test $rc -ne 0; then
Add build system Add autoconf style build infrastructure to the ZFS tree. This includes autogen.sh, configure.ac, m4 macros, some scripts/*, and makefiles for all the core ZFS components.
2010-08-26 18:22:58 +00:00
export=0
for file in $2; do
When checking for symbol exports, try compiling. This patch adds a new autoconf function: ZFS_LINUX_TRY_COMPILE_SYMBOL. This new function does the following: - Call LINUX_TRY_COMPILE with the specified parameters. - If unsuccessful, return false. - If successful and we're configuring with --enable-linux-builtin, return true. - Else, call CHECK_SYMBOL_EXPORT with the specified parameters and return the result. All calls to CHECK_SYMBOL_EXPORT are converted to LINUX_TRY_COMPILE_SYMBOL so that the tests work even when configuring for builtin on a kernel which doesn't have loadable module support, or hasn't been built yet. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Issue #851
2012-07-25 21:38:58 +00:00
grep -q -E "EXPORT_SYMBOL.*($1)" \
"$LINUX/$file" 2>/dev/null
Add build system Add autoconf style build infrastructure to the ZFS tree. This includes autogen.sh, configure.ac, m4 macros, some scripts/*, and makefiles for all the core ZFS components.
2010-08-26 18:22:58 +00:00
rc=$?
When checking for symbol exports, try compiling. This patch adds a new autoconf function: ZFS_LINUX_TRY_COMPILE_SYMBOL. This new function does the following: - Call LINUX_TRY_COMPILE with the specified parameters. - If unsuccessful, return false. - If successful and we're configuring with --enable-linux-builtin, return true. - Else, call CHECK_SYMBOL_EXPORT with the specified parameters and return the result. All calls to CHECK_SYMBOL_EXPORT are converted to LINUX_TRY_COMPILE_SYMBOL so that the tests work even when configuring for builtin on a kernel which doesn't have loadable module support, or hasn't been built yet. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Issue #851
2012-07-25 21:38:58 +00:00
if test $rc -eq 0; then
Convert 'if' statements to AS_IF in kernel.m4 The 'if' statements found in kernel.m4 were converted to use the portable alternative provided by autoconf, the AS_IF macro. Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2011-08-24 16:52:16 +00:00
export=1
break;
When checking for symbol exports, try compiling. This patch adds a new autoconf function: ZFS_LINUX_TRY_COMPILE_SYMBOL. This new function does the following: - Call LINUX_TRY_COMPILE with the specified parameters. - If unsuccessful, return false. - If successful and we're configuring with --enable-linux-builtin, return true. - Else, call CHECK_SYMBOL_EXPORT with the specified parameters and return the result. All calls to CHECK_SYMBOL_EXPORT are converted to LINUX_TRY_COMPILE_SYMBOL so that the tests work even when configuring for builtin on a kernel which doesn't have loadable module support, or hasn't been built yet. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Issue #851
2012-07-25 21:38:58 +00:00
fi
Add build system Add autoconf style build infrastructure to the ZFS tree. This includes autogen.sh, configure.ac, m4 macros, some scripts/*, and makefiles for all the core ZFS components.
2010-08-26 18:22:58 +00:00
done
When checking for symbol exports, try compiling. This patch adds a new autoconf function: ZFS_LINUX_TRY_COMPILE_SYMBOL. This new function does the following: - Call LINUX_TRY_COMPILE with the specified parameters. - If unsuccessful, return false. - If successful and we're configuring with --enable-linux-builtin, return true. - Else, call CHECK_SYMBOL_EXPORT with the specified parameters and return the result. All calls to CHECK_SYMBOL_EXPORT are converted to LINUX_TRY_COMPILE_SYMBOL so that the tests work even when configuring for builtin on a kernel which doesn't have loadable module support, or hasn't been built yet. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Issue #851
2012-07-25 21:38:58 +00:00
if test $export -eq 0; then :
Add build system Add autoconf style build infrastructure to the ZFS tree. This includes autogen.sh, configure.ac, m4 macros, some scripts/*, and makefiles for all the core ZFS components.
2010-08-26 18:22:58 +00:00
$4
When checking for symbol exports, try compiling. This patch adds a new autoconf function: ZFS_LINUX_TRY_COMPILE_SYMBOL. This new function does the following: - Call LINUX_TRY_COMPILE with the specified parameters. - If unsuccessful, return false. - If successful and we're configuring with --enable-linux-builtin, return true. - Else, call CHECK_SYMBOL_EXPORT with the specified parameters and return the result. All calls to CHECK_SYMBOL_EXPORT are converted to LINUX_TRY_COMPILE_SYMBOL so that the tests work even when configuring for builtin on a kernel which doesn't have loadable module support, or hasn't been built yet. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Issue #851
2012-07-25 21:38:58 +00:00
else :
Add build system Add autoconf style build infrastructure to the ZFS tree. This includes autogen.sh, configure.ac, m4 macros, some scripts/*, and makefiles for all the core ZFS components.
2010-08-26 18:22:58 +00:00
$3
When checking for symbol exports, try compiling. This patch adds a new autoconf function: ZFS_LINUX_TRY_COMPILE_SYMBOL. This new function does the following: - Call LINUX_TRY_COMPILE with the specified parameters. - If unsuccessful, return false. - If successful and we're configuring with --enable-linux-builtin, return true. - Else, call CHECK_SYMBOL_EXPORT with the specified parameters and return the result. All calls to CHECK_SYMBOL_EXPORT are converted to LINUX_TRY_COMPILE_SYMBOL so that the tests work even when configuring for builtin on a kernel which doesn't have loadable module support, or hasn't been built yet. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Issue #851
2012-07-25 21:38:58 +00:00
fi
else :
Add build system Add autoconf style build infrastructure to the ZFS tree. This includes autogen.sh, configure.ac, m4 macros, some scripts/*, and makefiles for all the core ZFS components.
2010-08-26 18:22:58 +00:00
$3
When checking for symbol exports, try compiling. This patch adds a new autoconf function: ZFS_LINUX_TRY_COMPILE_SYMBOL. This new function does the following: - Call LINUX_TRY_COMPILE with the specified parameters. - If unsuccessful, return false. - If successful and we're configuring with --enable-linux-builtin, return true. - Else, call CHECK_SYMBOL_EXPORT with the specified parameters and return the result. All calls to CHECK_SYMBOL_EXPORT are converted to LINUX_TRY_COMPILE_SYMBOL so that the tests work even when configuring for builtin on a kernel which doesn't have loadable module support, or hasn't been built yet. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Issue #851
2012-07-25 21:38:58 +00:00
fi
])
dnl #
dnl # ZFS_LINUX_TRY_COMPILE_SYMBOL
dnl # like ZFS_LINUX_TRY_COMPILE, except ZFS_CHECK_SYMBOL_EXPORT
dnl # is called if not compiling for builtin
dnl #
AC_DEFUN([ZFS_LINUX_TRY_COMPILE_SYMBOL], [
ZFS_LINUX_TRY_COMPILE([$1], [$2], [rc=0], [rc=1])
if test $rc -ne 0; then :
$6
else
if test "x$enable_linux_builtin" != xyes; then
ZFS_CHECK_SYMBOL_EXPORT([$3], [$4], [rc=0], [rc=1])
fi
if test $rc -ne 0; then :
$6
else :
$5
fi
fi
Add build system Add autoconf style build infrastructure to the ZFS tree. This includes autogen.sh, configure.ac, m4 macros, some scripts/*, and makefiles for all the core ZFS components.
2010-08-26 18:22:58 +00:00
])
Reference in New Issue Copy Permalink