d/freebsd-dev
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
5a239e7000
freebsd-dev/sys/mips/nlm/hal/sys.h

145 lines
4.6 KiB
C
Raw Normal View History

Add MIPS platform files for Netlogic XLP SoC. Processor, UART, PIC and Messaging Network code. Also add sys/mips/nlm/hal for on-chip device registers. In collaboration with: Prabhath Raman <prabhathpr at netlogicmicro com> Approved by: bz(re), jmallett, imp(mips)
2011-07-16 19:35:44 +00:00
/*-
* Copyright 2003-2011 Netlogic Microsystems (Netlogic). All rights
* reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are
* met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
*
* THIS SOFTWARE IS PROVIDED BY Netlogic Microsystems ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
* PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL NETLOGIC OR CONTRIBUTORS BE
* LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
* THE POSSIBILITY OF SUCH DAMAGE.
*
MIPS XLP platform code update. * Update the hardware access register definitions and functions to bring them in line with other Netlogic software. * Update the platform bus to use PCI even for on-chip devices. Add a dummy PCI driver to ignore on-chip devices which do not need driver. * Provide memory and IRQ resource allocation code for on-chip devices which cannot get it from PCI config. * add support for on-chip PCI and USB interfaces. * update conf files, enable pci and retain old MAXCPU until we can support >32 cpus. Approved by: re(kib), jmallett
2011-09-05 10:45:29 +00:00
* NETLOGIC_BSD
Add MIPS platform files for Netlogic XLP SoC. Processor, UART, PIC and Messaging Network code. Also add sys/mips/nlm/hal for on-chip device registers. In collaboration with: Prabhath Raman <prabhathpr at netlogicmicro com> Approved by: bz(re), jmallett, imp(mips)
2011-07-16 19:35:44 +00:00
* $FreeBSD$
MIPS XLP platform code update. * Update the hardware access register definitions and functions to bring them in line with other Netlogic software. * Update the platform bus to use PCI even for on-chip devices. Add a dummy PCI driver to ignore on-chip devices which do not need driver. * Provide memory and IRQ resource allocation code for on-chip devices which cannot get it from PCI config. * add support for on-chip PCI and USB interfaces. * update conf files, enable pci and retain old MAXCPU until we can support >32 cpus. Approved by: re(kib), jmallett
2011-09-05 10:45:29 +00:00
*/
Add MIPS platform files for Netlogic XLP SoC. Processor, UART, PIC and Messaging Network code. Also add sys/mips/nlm/hal for on-chip device registers. In collaboration with: Prabhath Raman <prabhathpr at netlogicmicro com> Approved by: bz(re), jmallett, imp(mips)
2011-07-16 19:35:44 +00:00
MIPS XLP platform code update. * Update the hardware access register definitions and functions to bring them in line with other Netlogic software. * Update the platform bus to use PCI even for on-chip devices. Add a dummy PCI driver to ignore on-chip devices which do not need driver. * Provide memory and IRQ resource allocation code for on-chip devices which cannot get it from PCI config. * add support for on-chip PCI and USB interfaces. * update conf files, enable pci and retain old MAXCPU until we can support >32 cpus. Approved by: re(kib), jmallett
2011-09-05 10:45:29 +00:00
#ifndef __NLM_HAL_SYS_H__
Support for XLP4xx and XLP 8xx B0 revision - Add 4xx processor IDs, add workaround in CPU detection code. - Update frequency detection code for XLP 8xx. - Add setting device frequency code. - Update processor ID checking code.
2012-03-27 07:39:05 +00:00
#define __NLM_HAL_SYS_H__
Add MIPS platform files for Netlogic XLP SoC. Processor, UART, PIC and Messaging Network code. Also add sys/mips/nlm/hal for on-chip device registers. In collaboration with: Prabhath Raman <prabhathpr at netlogicmicro com> Approved by: bz(re), jmallett, imp(mips)
2011-07-16 19:35:44 +00:00
/**
* @file_name sys.h
* @author Netlogic Microsystems
* @brief HAL for System configuration registers
*/
MIPS XLP platform code update. * Update the hardware access register definitions and functions to bring them in line with other Netlogic software. * Update the platform bus to use PCI even for on-chip devices. Add a dummy PCI driver to ignore on-chip devices which do not need driver. * Provide memory and IRQ resource allocation code for on-chip devices which cannot get it from PCI config. * add support for on-chip PCI and USB interfaces. * update conf files, enable pci and retain old MAXCPU until we can support >32 cpus. Approved by: re(kib), jmallett
2011-09-05 10:45:29 +00:00
#define SYS_CHIP_RESET 0x00
#define SYS_POWER_ON_RESET_CFG 0x01
#define SYS_EFUSE_DEVICE_CFG_STATUS0 0x02
#define SYS_EFUSE_DEVICE_CFG_STATUS1 0x03
#define SYS_EFUSE_DEVICE_CFG_STATUS2 0x04
#define SYS_EFUSE_DEVICE_CFG3 0x05
#define SYS_EFUSE_DEVICE_CFG4 0x06
#define SYS_EFUSE_DEVICE_CFG5 0x07
#define SYS_EFUSE_DEVICE_CFG6 0x08
#define SYS_EFUSE_DEVICE_CFG7 0x09
#define SYS_PLL_CTRL 0x0a
#define SYS_CPU_RESET 0x0b
#define SYS_CPU_NONCOHERENT_MODE 0x0d
#define SYS_CORE_DFS_DIS_CTRL 0x0e
#define SYS_CORE_DFS_RST_CTRL 0x0f
#define SYS_CORE_DFS_BYP_CTRL 0x10
#define SYS_CORE_DFS_PHA_CTRL 0x11
#define SYS_CORE_DFS_DIV_INC_CTRL 0x12
#define SYS_CORE_DFS_DIV_DEC_CTRL 0x13
#define SYS_CORE_DFS_DIV_VALUE 0x14
#define SYS_RESET 0x15
#define SYS_DFS_DIS_CTRL 0x16
#define SYS_DFS_RST_CTRL 0x17
#define SYS_DFS_BYP_CTRL 0x18
#define SYS_DFS_DIV_INC_CTRL 0x19
#define SYS_DFS_DIV_DEC_CTRL 0x1a
#define SYS_DFS_DIV_VALUE0 0x1b
#define SYS_DFS_DIV_VALUE1 0x1c
#define SYS_SENSE_AMP_DLY 0x1d
#define SYS_SOC_SENSE_AMP_DLY 0x1e
#define SYS_CTRL0 0x1f
#define SYS_CTRL1 0x20
#define SYS_TIMEOUT_BS1 0x21
#define SYS_BYTE_SWAP 0x22
#define SYS_VRM_VID 0x23
#define SYS_PWR_RAM_CMD 0x24
#define SYS_PWR_RAM_ADDR 0x25
#define SYS_PWR_RAM_DATA0 0x26
#define SYS_PWR_RAM_DATA1 0x27
#define SYS_PWR_RAM_DATA2 0x28
#define SYS_PWR_UCODE 0x29
#define SYS_CPU0_PWR_STATUS 0x2a
#define SYS_CPU1_PWR_STATUS 0x2b
#define SYS_CPU2_PWR_STATUS 0x2c
#define SYS_CPU3_PWR_STATUS 0x2d
#define SYS_CPU4_PWR_STATUS 0x2e
#define SYS_CPU5_PWR_STATUS 0x2f
#define SYS_CPU6_PWR_STATUS 0x30
#define SYS_CPU7_PWR_STATUS 0x31
#define SYS_STATUS 0x32
#define SYS_INT_POL 0x33
#define SYS_INT_TYPE 0x34
#define SYS_INT_STATUS 0x35
#define SYS_INT_MASK0 0x36
#define SYS_INT_MASK1 0x37
#define SYS_UCO_S_ECC 0x38
#define SYS_UCO_M_ECC 0x39
#define SYS_UCO_ADDR 0x3a
#define SYS_UCO_INSTR 0x3b
#define SYS_MEM_BIST0 0x3c
#define SYS_MEM_BIST1 0x3d
#define SYS_MEM_BIST2 0x3e
#define SYS_MEM_BIST3 0x3f
#define SYS_MEM_BIST4 0x40
#define SYS_MEM_BIST5 0x41
#define SYS_MEM_BIST6 0x42
#define SYS_MEM_BIST7 0x43
#define SYS_MEM_BIST8 0x44
#define SYS_MEM_BIST9 0x45
#define SYS_MEM_BIST10 0x46
#define SYS_MEM_BIST11 0x47
#define SYS_MEM_BIST12 0x48
#define SYS_SCRTCH0 0x49
#define SYS_SCRTCH1 0x4a
#define SYS_SCRTCH2 0x4b
#define SYS_SCRTCH3 0x4c
Add MIPS platform files for Netlogic XLP SoC. Processor, UART, PIC and Messaging Network code. Also add sys/mips/nlm/hal for on-chip device registers. In collaboration with: Prabhath Raman <prabhathpr at netlogicmicro com> Approved by: bz(re), jmallett, imp(mips)
2011-07-16 19:35:44 +00:00
#if !defined(LOCORE) && !defined(__ASSEMBLY__)
MIPS XLP platform code update. * Update the hardware access register definitions and functions to bring them in line with other Netlogic software. * Update the platform bus to use PCI even for on-chip devices. Add a dummy PCI driver to ignore on-chip devices which do not need driver. * Provide memory and IRQ resource allocation code for on-chip devices which cannot get it from PCI config. * add support for on-chip PCI and USB interfaces. * update conf files, enable pci and retain old MAXCPU until we can support >32 cpus. Approved by: re(kib), jmallett
2011-09-05 10:45:29 +00:00
#define nlm_read_sys_reg(b, r) nlm_read_reg(b, r)
#define nlm_write_sys_reg(b, r, v) nlm_write_reg(b, r, v)
#define nlm_get_sys_pcibase(node) nlm_pcicfg_base(XLP_IO_SYS_OFFSET(node))
#define nlm_get_sys_regbase(node) (nlm_get_sys_pcibase(node) + XLP_IO_PCI_HDRSZ)
Add MIPS platform files for Netlogic XLP SoC. Processor, UART, PIC and Messaging Network code. Also add sys/mips/nlm/hal for on-chip device registers. In collaboration with: Prabhath Raman <prabhathpr at netlogicmicro com> Approved by: bz(re), jmallett, imp(mips)
2011-07-16 19:35:44 +00:00
Support for XLP4xx and XLP 8xx B0 revision - Add 4xx processor IDs, add workaround in CPU detection code. - Update frequency detection code for XLP 8xx. - Add setting device frequency code. - Update processor ID checking code.
2012-03-27 07:39:05 +00:00
enum {
/* Don't change order and it must start from zero */
DFS_DEVICE_NAE = 0,
DFS_DEVICE_SAE,
DFS_DEVICE_RSA,
DFS_DEVICE_DTRE,
DFS_DEVICE_CMP,
DFS_DEVICE_KBP,
DFS_DEVICE_DMC,
DFS_DEVICE_NAND,
DFS_DEVICE_MMC,
DFS_DEVICE_NOR,
DFS_DEVICE_CORE,
DFS_DEVICE_REGEX_SLOW,
DFS_DEVICE_REGEX_FAST,
DFS_DEVICE_SATA,
INVALID_DFS_DEVICE = 0xFF
};
Add MIPS platform files for Netlogic XLP SoC. Processor, UART, PIC and Messaging Network code. Also add sys/mips/nlm/hal for on-chip device registers. In collaboration with: Prabhath Raman <prabhathpr at netlogicmicro com> Approved by: bz(re), jmallett, imp(mips)
2011-07-16 19:35:44 +00:00
#endif
#endif
Reference in New Issue Copy Permalink