freebsd-dev/etc/network.subr

#!/bin/sh -x
#
# $FreeBSD$
#

# PROVIDE: network1
# REQUIRE: atm1 ipfilter mountcritlocal pccard serial sppp sysctl tty
# KEYWORD: FreeBSD

. /etc/rc.subr

name="network1"
start_cmd="network_start"
stop_cmd="network_stop"

convert_host_conf()
{
    host_conf=$1; shift;
    nsswitch_conf=$1; shift;
    awk '                                                                   \
        /^[:blank:]*#/       { next }                                       \
        /(hosts|local|file)/ { nsswitch[c] = "files"; c++; next }           \
        /(dns|bind)/         { nsswitch[c] = "dns";   c++; next }           \
        /nis/                { nsswitch[c] = "nis";   c++; next }           \
        { printf "Warning: unrecognized line [%s]", $0 > "/dev/stderr" }    \
        END {                                                               \
                printf "hosts: ";                                           \
                for (i in nsswitch) printf "%s ", nsswitch[i];              \
                printf "\n";                                                \
        }' < $host_conf > $nsswitch_conf
}

generate_host_conf()
{
    nsswitch_conf=$1; shift;
    host_conf=$1; shift;

    awk '
BEGIN {
    xlat["files"] = "hosts";
    xlat["dns"] = "bind";
    xlat["nis"] = "nis";
    cont = 0;
}
sub(/^[\t ]*hosts:/, "") || cont {
    if (!cont)
        srcs = ""
    sub(/#.*/, "")
    gsub(/[][]/, " & ")
    cont = sub(/\\$/, "")
    srcs = srcs " " $0
}
END {
    print "# Auto-generated from nsswitch.conf, do not edit"
    ns = split(srcs, s)
    for (n = 1; n <= ns; ++n) {
        if (s[n] in xlat)
            print xlat[s[n]]
    }
}
' <$nsswitch_conf >$host_conf
}

network_start()
{
	# set hostname, turn on network
	#
	echo -n "Doing initial network setup:"

	# Generate host.conf for compatibility
	#
	if [ -f "/etc/nsswitch.conf" ]; then
		echo -n ' host.conf'
		generate_host_conf /etc/nsswitch.conf /etc/host.conf
	fi

	# Convert host.conf to nsswitch.conf if necessary
	#
	if [ -f "/etc/host.conf" -a ! -f "/etc/nsswitch.conf" ]; then
		echo ''
		echo 'Warning: /etc/host.conf is no longer used'
		echo '  /etc/nsswitch.conf will be created for you'
		convert_host_conf /etc/host.conf /etc/nsswitch.conf
	fi

	# Set the host name if it is not already set
	#
	if [ -z "`hostname -s`" ]; then
		hostname ${hostname}
		echo -n ' hostname'
	fi

	# Set the domainname if we're using NIS
	#
	if checkyesno nisdomainname ; then
		domainname ${nisdomainname}
		echo -n ' domain'
	fi

	# Attempt to create cloned interfaces.
	for ifn in ${cloned_interfaces}; do
		ifconfig ${ifn} create
	done

	# Set up all the network interfaces, calling startup scripts if needed
	#
	case ${network_interfaces} in
	[Aa][Uu][Tt][Oo])
		network_interfaces="`ifconfig -l`"
		;;
	*)
		network_interfaces="${network_interfaces} ${cloned_interfaces}"
		;;
	esac

	dhcp_interfaces=""
	for ifn in ${network_interfaces}; do
		if [ -r /etc/start_if.${ifn} ]; then
			. /etc/start_if.${ifn}
			eval showstat_$ifn=1
		fi

		# Do the primary ifconfig if specified
		#
		eval ifconfig_args=\$ifconfig_${ifn}

		case ${ifconfig_args} in
		'')
			;;
		[Dd][Hh][Cc][Pp])
			# DHCP inits are done all in one go below
			dhcp_interfaces="$dhcp_interfaces $ifn"
			eval showstat_$ifn=1
			;;
		*)
			ifconfig ${ifn} ${ifconfig_args}
			eval showstat_$ifn=1
			;;
		esac
	done

	if [ ! -z "${dhcp_interfaces}" ]; then
		${dhcp_program:-/sbin/dhclient} ${dhcp_flags} ${dhcp_interfaces}
	fi

	for ifn in ${network_interfaces}; do
		# Check to see if aliases need to be added
		#
		alias=0
		while : ; do
			eval ifconfig_args=\$ifconfig_${ifn}_alias${alias}
			if [ -n "${ifconfig_args}" ]; then
				ifconfig ${ifn} ${ifconfig_args} alias
				eval showstat_$ifn=1
				alias=$((${alias} + 1))
			else
				break;
			fi
		done

		# Do ipx address if specified
		#
		eval ifconfig_args=\$ifconfig_${ifn}_ipx
		if [ -n "${ifconfig_args}" ]; then
			ifconfig ${ifn} ${ifconfig_args}
			eval showstat_$ifn=1
		fi
	done

	# catch-all for interfaces that haven't been 'ifconfig'ed so far
	for ifn in ${network_interfaces}; do
		eval showstat=\$showstat_${ifn}
		if [ ! -z ${showstat} ]; then
			ifconfig ${ifn}
		fi
	done

	

	# Check $defaultroute, then /etc/mygate, for the name of my gateway
	# host. That name must be in /etc/hosts.
	#
	if [ -z "$defaultroute" ] && [ -f /etc/mygate ]; then
		defaultroute=`cat /etc/mygate`
	fi
	if [ -n "$defaultroute" ]; then
		route add default $defaultroute
	fi

	# Check if each configured interface xxN has an $ifaliases_xxN variable
	# associated, then configure additional IP addresses for that interface.
	# The variable contains a list of "address netmask" pairs, with
	# "netmask" set to "-" if the interface default netmask is to be used.
	#
	# Note that $ifaliases_xxN works only with certain configurations and
	# considered not recommended.  Use /etc/ifconfig.xxN if possible.
	# 
	#
	if [ -n "$configured_interfaces" ]; then
		echo "Adding interface aliases:"
		done_aliases_message=yes
	fi
	for int in $configured_interfaces; do
		eval args=\$ifaliases_$int
		if [ -n "$args" ]; then
			set -- $args
			while [ $# -ge 2 ]; do
				addr=$1 ; net=$2 ; shift 2
				if [ "$net" = "-" ]; then
					# for compatibility only, obsolete
					ifconfig $int inet alias $addr
				else
					ifconfig $int inet alias $addr \
					    netmask $net
				fi
				# Use loopback, not the wire
				route add $addr 127.0.0.1
			done
		fi
	done

	# /etc/ifaliases, if it exists, contains the names of additional IP
	# addresses for each interface. It is formatted as a series of lines
	# that contain
	#	address interface netmask
	#
	# Note that /etc/ifaliases works only with certain cases only and its
	# use is not recommended.  Use /etc/ifconfig.xxN instead.
	#
	#
	if [ -f /etc/ifaliases ]; then
		if [ "$done_aliases_message" != yes ]; then
			echo "Adding interface aliases:"
		fi
		while read addr int net; do
			if [ -z "$net" ]; then
				# for compatibility only, obsolete
				ifconfig $int inet alias $addr
			else
				ifconfig $int inet alias $addr netmask $net
			fi
			# use loopback, not the wire
			route add $addr 127.0.0.1
		done < /etc/ifaliases
	fi

	# IPv6 interface autoconfiguration.
	#
	if ifconfig lo0 inet6 >/dev/null 2>&1; then
		# wait till DAD is completed. always invoke it in case
		# if are configured manually by ifconfig
		#
		dadcount=`sysctl -n net.inet6.ip6.dad_count 2>/dev/null`
		sleep $dadcount
		sleep 1

		if checkyesno rtsol; then
			if [ "$ip6mode" = "autohost" ]; then
				echo 'Sending router solicitation...'
				rtsol $rtsol_flags
			else
				echo
				warn \
			    "ip6mode must be set to 'autohost' to use rtsol."
			fi

			# wait till DAD is completed, for global addresses
			# configured by router advert message.
			#
			sleep $dadcount
			sleep 1
		fi
	fi

	# XXX this must die
	if [ -s /etc/netstart.local ]; then
		sh /etc/netstart.local start
	fi
	echo '.'

	# Resync ipfilter
	/etc/rc.d/ipfilter resync
}

network_stop()
{
	echo "Stopping network."

	# XXX this must die
	if [ -s /etc/netstart.local ]; then
		sh /etc/netstart.local stop
	fi

	echo "Deleting aliases."
	if [ -f /etc/ifaliases ]; then
		while read addr int net; do
			ifconfig $int inet delete $addr
		done < /etc/ifaliases
	fi

	for int in `ifconfig -lu`; do
		eval args=\$ifaliases_$int
		if [ -n "$args" ]; then
			set -- $args
			while [ $# -ge 2 ]; do
				addr=$1 ; net=$2 ; shift 2
				ifconfig $int inet delete $addr
			done
		fi
	done

	# down interfaces
	#
	echo -n 'Downing network interfaces:'
	if [ "$net_interfaces" != NO ]; then
		if checkyesno auto_ifconfig; then
			tmp=`ifconfig -l`
		else
			tmp="$net_interfaces"
		fi
		for int in $tmp; do
			eval args=\$ifconfig_$int
			if [ -n "$args" ] || [ -f /etc/ifconfig.$int ]; then
				echo -n " $int"
				ifconfig $int down
			fi
		done
		echo "."
	fi

	# flush routes
	#
	route -n flush

}

load_rc_config $name
run_rc_command "$1"