d/freebsd-dev
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
94caedfbd3
freebsd-dev/sys/conf/options

718 lines
18 KiB
Plaintext
Raw Normal View History

$Id$ -> $FreeBSD$
1999-08-28 01:08:13 +00:00
# $FreeBSD$
Document options policy. Reviewed by: bde
1998-03-10 15:55:38 +00:00
#
Change spaces to tabs where appropriate
1999-11-06 23:51:29 +00:00
# On the handling of kernel options
KAME netinet6 basic part(no IPsec,no V6 Multicast Forwarding, no UDP/TCP for IPv6 yet) With this patch, you can assigne IPv6 addr automatically, and can reply to IPv6 ping. Reviewed by: freebsd-arch, cvs-committers Obtained from: KAME project
1999-11-22 02:45:11 +00:00
#
Note that options should be listed in NOTES, not LINT, although LINT is generated from NOTES. Also correct a bogus path; <machine>/conf/options.<machine> doesn't exist.
2001-07-08 01:02:37 +00:00
# All kernel options should be listed in NOTES, with suitable
Document options policy. Reviewed by: bde
1998-03-10 15:55:38 +00:00
# descriptions. Negative options (options that make some code not
Fill paragraphs after previous commit.
2001-07-08 01:04:10 +00:00
# compile) should be commented out; LINT (generated from NOTES) should
# compile as much code as possible. Try to structure option-using
# code so that a single option only switch code on, or only switch
# code off, to make it possible to have a full compile-test. If
# necessary, you can check for COMPILING_LINT to get maximum code
# coverage.
KAME netinet6 basic part(no IPsec,no V6 Multicast Forwarding, no UDP/TCP for IPv6 yet) With this patch, you can assigne IPv6 addr automatically, and can reply to IPv6 ping. Reviewed by: freebsd-arch, cvs-committers Obtained from: KAME project
1999-11-22 02:45:11 +00:00
#
Document options policy. Reviewed by: bde
1998-03-10 15:55:38 +00:00
# All new options shall also be listed in either "conf/options" or
Fill paragraphs after previous commit.
2001-07-08 01:04:10 +00:00
# "conf/options.<machine>". Options that affect a single source-file
# <xxx>.[c|s] should be directed into "opt_<xxx>.h", while options
# that affect multiple files should either go in "opt_global.h" if
# this is a kernel-wide option (used just about everywhere), or in
# "opt_<option-name-in-lower-case>.h" if it affect only some files.
# Note that the effect of listing only an option without a
# header-file-name in conf/options (and cousins) is that the last
# convention is followed.
KAME netinet6 basic part(no IPsec,no V6 Multicast Forwarding, no UDP/TCP for IPv6 yet) With this patch, you can assigne IPv6 addr automatically, and can reply to IPv6 ping. Reviewed by: freebsd-arch, cvs-committers Obtained from: KAME project
1999-11-22 02:45:11 +00:00
#
Document options policy. Reviewed by: bde
1998-03-10 15:55:38 +00:00
# This handling scheme is not yet fully implemented.
#
#
# Format of this file:
Add more options into the conf/options and i386/conf/options.i386 files and the #include hooks so that 'make depend' is more useful. This covers most of the options I regularly use (but not all) and some other easy ones.
1996-03-02 18:24:13 +00:00
# Option name filename
Document options policy. Reviewed by: bde
1998-03-10 15:55:38 +00:00
#
# If filename is missing, the default is
# opt_<name-of-option-in-lower-case>.h
Added newlines and punctuation. Removed defunct options. It will be easy to keep track of bogus options by looking at CFLAGS when all real options are moved out of CFLAGS.
1996-03-29 13:51:30 +00:00
Give in to the oblique nagging and move AAC and AHC/AHD comments out of /sys/conf/options and into /sys/conf/NOTES
2004-03-31 08:22:09 +00:00
AAC_DEBUG opt_aac.h
AHC_ALLOW_MEMIO opt_aic7xxx.h
AHC_TMODE_ENABLE opt_aic7xxx.h
AHC_DUMP_EEPROM opt_aic7xxx.h
AHC_DEBUG opt_aic7xxx.h
AHC_DEBUG_OPTS opt_aic7xxx.h
AHC_REG_PRETTY_PRINT opt_aic7xxx.h
AHD_DEBUG opt_aic79xx.h
AHD_DEBUG_OPTS opt_aic79xx.h
AHD_TMODE_ENABLE opt_aic79xx.h
AHD_REG_PRETTY_PRINT opt_aic79xx.h
ADW_ALLOW_MEMIO opt_adw.h
Add ADW_ALLOW_MEMIO and DPT_ALLOW_MEMIO. Until our configuration framework properly detects broken PCI-PCI bridges, users will have to manually enable memory mapped I/O for these drivers. <sigh>
1998-10-07 03:30:55 +00:00
Moved comments on 3ware 9000 series RAID controller driver options from options to NOTES.
2004-03-31 18:46:13 +00:00
TWA_DEBUG opt_twa.h
TWA_FLASH_FIRMWARE opt_twa.h
Added options for 3ware 9000 series RAID controller driver (twa).
2004-03-30 18:53:18 +00:00
Update for the KDB framework: o Rename WITNESS_DDB to WITNESS_KDB. In the new world order KDB is the acronym to use for debugging related code. The DDB option is used to enable the DDB debugger backend only. o Likewise, rename DDB_TRACE to KDB_TRACE, rename DDB_UNATTENDED to KDB_UNATTENDED and rename SC_HISTORY_DDBKEY to SC_HISTORY_KDBKEY. o Remove DDB_NOKLDSYM. The new DDB backend supports pre-linker symbol lookups as well as KLD symbol lookups at the same time. o Remove GDB_REMOTE_CHAT. The GDB protocol hacks to allow this are FreeBSD specific. At the same time, the GDB protocol has packets for console output.
2004-07-11 01:44:07 +00:00
# Debugging options.
DDB
DDB_NUMSYM opt_ddb.h
GDB
GDBSPEED opt_gdb.h
KDB opt_global.h
KDB_TRACE opt_kdb.h
KDB_UNATTENDED opt_kdb.h
Move the 'debug' sysctl tree under options SYSCTL_DEBUG. It generates an inordinate amount of synchronous console output that is fairly undesirable on slower serial console. It's easily hit by accident when frobbing other sysctls late at night.
2004-10-27 19:26:01 +00:00
SYSCTL_DEBUG opt_sysctl.h
Update for the KDB framework: o Rename WITNESS_DDB to WITNESS_KDB. In the new world order KDB is the acronym to use for debugging related code. The DDB option is used to enable the DDB debugger backend only. o Likewise, rename DDB_TRACE to KDB_TRACE, rename DDB_UNATTENDED to KDB_UNATTENDED and rename SC_HISTORY_DDBKEY to SC_HISTORY_KDBKEY. o Remove DDB_NOKLDSYM. The new DDB backend supports pre-linker symbol lookups as well as KLD symbol lookups at the same time. o Remove GDB_REMOTE_CHAT. The GDB protocol hacks to allow this are FreeBSD specific. At the same time, the GDB protocol has packets for console output.
2004-07-11 01:44:07 +00:00
Sorted options.
1996-12-23 18:42:02 +00:00
# Miscellaneous options.
Add "options ADAPTIVE_GIANT" which causes Giant to also be treated in an adaptive fashion when adaptive mutexes are enabled. The theory behind non-adaptive Giant is that Giant will be held for long periods of time, and therefore spinning waiting on it is wasteful. However, in MySQL benchmarks which are relatively Giant-free, running Giant adaptive makes an observable difference on SMP (5% transaction rate improvement). As such, make adaptive behavior on Giant an option so it can be more widely benchmarked.
2004-07-27 16:34:48 +00:00
ADAPTIVE_GIANT opt_adaptive_mutexes.h
Unbreak kernel compiles by preserving an old opt_adaptive_mutexes.h file name.
2004-07-18 18:21:39 +00:00
NO_ADAPTIVE_MUTEXES opt_adaptive_mutexes.h
Improve consistency, ordering, style of options: - Remove extra blank lines - Sort options - Remove comments that belong in NOTES Submitted by: bde (older revision)
2003-04-15 19:43:52 +00:00
ALQ
Add support for the Coda 6.x venus<->kernel interface. This extends FIDs to be 128-bits wide and adds support for realms. Add a new CODA_COMPAT_5 option, which requests support for the old Coda 5.x interface instead of the new one. Create a new coda5.ko module that supports the 5.x interface, and make the existing coda.ko module use the new 6.x interface. These modules cannot both be loaded at the same time. Obtained from: Jan Harkes & the coda-6.0.2 distribution, NetBSD (drochner) (CODA_COMPAT_5 option).
2003-09-07 07:43:10 +00:00
CODA_COMPAT_5 opt_coda.h
Turn NSWAPDEV into a new-style option.
1998-01-25 04:13:25 +00:00
COMPAT_43 opt_compat.h
Introduce syscall.master option 'COMPAT4' which allows one to wrap syscalls for FreeBSD 4 compatibility. Add kernel option COMPAT_FREEBSD4 to enable these syscalls.
2002-07-12 06:38:34 +00:00
COMPAT_FREEBSD4 opt_compat.h
Add COMPAT_FREEBSD5 Approved by: re
2005-06-30 00:09:18 +00:00
COMPAT_FREEBSD5 opt_compat.h
Make LINT compile.
2000-09-16 18:55:05 +00:00
COMPILING_LINT opt_global.h
Make the speed used by gdb over serial settable in the kernel configuration. This facilitates the use in circumstances where you are using a serial console as well. GDB doesn't support anything higher than 9600 baud (19k2 if you are lucky), but the console does.
2002-06-18 21:30:37 +00:00
CONSPEED opt_comconsole.h
Improve consistency, ordering, style of options: - Remove extra blank lines - Sort options - Remove comments that belong in NOTES Submitted by: bde (older revision)
2003-04-15 19:43:52 +00:00
CY_PCI_FASTINTR
Fixed some insertion sort errors.
2004-02-25 09:35:35 +00:00
DIRECTIO opt_directio.h
Turn PREEMPTION into a kernel option. Make sure that it's defined if FULL_PREEMPTION is defined. Add a runtime warning to ULE if PREEMPTION is enabled (code inspired by the PREEMPTION warning in kern_switch.c). This is a possible MT5 candidate.
2004-09-02 18:59:15 +00:00
FULL_PREEMPTION opt_sched.h
PREEMPTION opt_sched.h
Add IPI support for preempting a thread on another CPU. MFC after: 3 weeks
2005-06-09 18:23:54 +00:00
IPI_PREEMPTION opt_sched.h
NB: This commit does *NOT* make GEOM the default in FreeBSD NB: But it will enable it in all kernels not having options "NO_GEOM" Put the GEOM related options into the intended order. Add "options NO_GEOM" to all kernel configs apart from NOTES. In some order of controlled fashion, the NO_GEOM options will be removed, architecture by architecture in the coming days. There are currently three known issues which may force people to need the NO_GEOM option: boot0cfg/fdisk: Tries to update the MBR while it is being used to control slices. GEOM does not allow this as a direct operation. SCSI floppy drives: Appearantly the scsi-da driver return "EBUSY" if no media is inserted. This is wrong, it should return ENXIO. PC98: It is unclear if GEOM correctly recognizes all variants of PC98 disklabels. (Help Wanted! I have neither docs nor HW) These issues are all being worked. Sponsored by: DARPA & NAI Labs.
2002-10-05 16:35:33 +00:00
GEOM_AES opt_geom.h
Add a rudimentary class for slicing Apple partitioned disks. More work is needed on this, stakeholders please contact me. Not quite asked for by: rwatson
2003-01-31 16:27:07 +00:00
GEOM_APPLE opt_geom.h
Add Geom Based Disk Encryption to the tree. This is an encryption module designed for to secure denial of access to the contents of "cold disks" with or without destruction activation. Major features: * Based on AES, MD5 and ARC4 algorithms. * Four cryptographic barriers: 1) Pass-phrase encrypts the master key. 2) Pass-phrase + Lock data locates master key. 3) 128 bit key derived from 2048 bit master key protects sector key. 3) 128 bit random single-use sector keys protect data payload. * Up to four different changeable pass-phrases. * Blackening feature for provable destruction of master key material. * Isotropic disk contents offers no information about sector contents. * Configurable destination sector range allows steganographic deployment. This commit adds the kernel part, separate commits will follow for the userland utility and documentation. This software was developed for the FreeBSD Project by Poul-Henning Kamp and NAI Labs, the Security Research Division of Network Associates, Inc. under DARPA/SPAWAR contract N66001-01-C-8035 ("CBOSS"), as part of the DARPA CHATS research program. Many thanks to Robert Watson, CBOSS Principal Investigator for making this possible. Sponsored by: DARPA & NAI Labs.
2002-10-19 17:02:17 +00:00
GEOM_BDE opt_geom.h
NB: This commit does *NOT* make GEOM the default in FreeBSD NB: But it will enable it in all kernels not having options "NO_GEOM" Put the GEOM related options into the intended order. Add "options NO_GEOM" to all kernel configs apart from NOTES. In some order of controlled fashion, the NO_GEOM options will be removed, architecture by architecture in the coming days. There are currently three known issues which may force people to need the NO_GEOM option: boot0cfg/fdisk: Tries to update the MBR while it is being used to control slices. GEOM does not allow this as a direct operation. SCSI floppy drives: Appearantly the scsi-da driver return "EBUSY" if no media is inserted. This is wrong, it should return ENXIO. PC98: It is unclear if GEOM correctly recognizes all variants of PC98 disklabels. (Help Wanted! I have neither docs nor HW) These issues are all being worked. Sponsored by: DARPA & NAI Labs.
2002-10-05 16:35:33 +00:00
GEOM_BSD opt_geom.h
Allow geom_concat and geom_gate to be compiled in kernel.
2004-05-03 21:18:56 +00:00
GEOM_CONCAT opt_geom.h
Connect GEOM_ELI class to the build. MFC after: 1 week
2005-07-27 21:47:55 +00:00
GEOM_ELI opt_geom.h
Add "GEOM_FOX", a class which detects and selects between multiple redundant paths to the same device. This class reacts to a label in the first sector of the device, which is created the following way: # "0123456789abcdef012345..." # "<----magic-----><-id-...> echo "GEOM::FOX someid" | dd of=/dev/da0 conv=sync NB: Since the fact that multiple disk devices are in fact the same device is not known to GEOM, the geom taste/spoil process cannot fully catch all corner cases and this module can therefore be confused if you do the right wrong things. NB: The disk level drivers need to do the right thing for this to be useful, and that is not by definition currently the case.
2003-06-18 09:29:28 +00:00
GEOM_FOX opt_geom.h
Allow geom_concat and geom_gate to be compiled in kernel.
2004-05-03 21:18:56 +00:00
GEOM_GATE opt_geom.h
NB: This commit does *NOT* make GEOM the default in FreeBSD NB: But it will enable it in all kernels not having options "NO_GEOM" Put the GEOM related options into the intended order. Add "options NO_GEOM" to all kernel configs apart from NOTES. In some order of controlled fashion, the NO_GEOM options will be removed, architecture by architecture in the coming days. There are currently three known issues which may force people to need the NO_GEOM option: boot0cfg/fdisk: Tries to update the MBR while it is being used to control slices. GEOM does not allow this as a direct operation. SCSI floppy drives: Appearantly the scsi-da driver return "EBUSY" if no media is inserted. This is wrong, it should return ENXIO. PC98: It is unclear if GEOM correctly recognizes all variants of PC98 disklabels. (Help Wanted! I have neither docs nor HW) These issues are all being worked. Sponsored by: DARPA & NAI Labs.
2002-10-05 16:35:33 +00:00
GEOM_GPT opt_geom.h
Introduce GEOM_LABEL class. This class is used for detecting volume labels on file systems: UFS, MSDOSFS (FAT12, FAT16, FAT32) and ISO9660. It also provide native labelization (there is no need for file system). g_label_ufs.c is based on geom_vol_ffs from Gordon Tetlow. g_label_msdos.c and g_label_iso9660.c are probably hacks, I just found where volume labels are stored and I use those offsets here, but with this class it should be easy to do it as it should be done by someone who know how. Implementing volume labels detection for other file systems also should be trivial. New providers are created in those directories: /dev/ufs/ (UFS1, UFS2) /dev/msdosfs/ (FAT12, FAT16, FAT32) /dev/iso9660/ (ISO9660) /dev/label/ (native labels, configured with glabel(8)) Manual page cleanups and some comments inside were submitted by Simon L. Nielsen, who was, as always, very helpful. Thanks!
2004-07-02 19:40:36 +00:00
GEOM_LABEL opt_geom.h
NB: This commit does *NOT* make GEOM the default in FreeBSD NB: But it will enable it in all kernels not having options "NO_GEOM" Put the GEOM related options into the intended order. Add "options NO_GEOM" to all kernel configs apart from NOTES. In some order of controlled fashion, the NO_GEOM options will be removed, architecture by architecture in the coming days. There are currently three known issues which may force people to need the NO_GEOM option: boot0cfg/fdisk: Tries to update the MBR while it is being used to control slices. GEOM does not allow this as a direct operation. SCSI floppy drives: Appearantly the scsi-da driver return "EBUSY" if no media is inserted. This is wrong, it should return ENXIO. PC98: It is unclear if GEOM correctly recognizes all variants of PC98 disklabels. (Help Wanted! I have neither docs nor HW) These issues are all being worked. Sponsored by: DARPA & NAI Labs.
2002-10-05 16:35:33 +00:00
GEOM_MBR opt_geom.h
Connect GEOM_MIRROR class to the build.
2004-07-30 23:18:53 +00:00
GEOM_MIRROR opt_geom.h
- Connect geom(8) and its libraries to the build. - Connect geom_stripe and geom_nop modules to the build. - Connect STRIPE and NOP classes to the LINT build. - Disconnect gconcat(8) from the build. Supported by: Wheel - Open Technologies - http://www.wheel.pl
2004-05-20 10:37:13 +00:00
GEOM_NOP opt_geom.h
NB: This commit does *NOT* make GEOM the default in FreeBSD NB: But it will enable it in all kernels not having options "NO_GEOM" Put the GEOM related options into the intended order. Add "options NO_GEOM" to all kernel configs apart from NOTES. In some order of controlled fashion, the NO_GEOM options will be removed, architecture by architecture in the coming days. There are currently three known issues which may force people to need the NO_GEOM option: boot0cfg/fdisk: Tries to update the MBR while it is being used to control slices. GEOM does not allow this as a direct operation. SCSI floppy drives: Appearantly the scsi-da driver return "EBUSY" if no media is inserted. This is wrong, it should return ENXIO. PC98: It is unclear if GEOM correctly recognizes all variants of PC98 disklabels. (Help Wanted! I have neither docs nor HW) These issues are all being worked. Sponsored by: DARPA & NAI Labs.
2002-10-05 16:35:33 +00:00
GEOM_PC98 opt_geom.h
Connect RAID3 GEOM class to the build.
2004-08-16 06:36:21 +00:00
GEOM_RAID3 opt_geom.h
Connect SHSEC GEOM class to the build.
2005-01-11 18:18:40 +00:00
GEOM_SHSEC opt_geom.h
- Connect geom(8) and its libraries to the build. - Connect geom_stripe and geom_nop modules to the build. - Connect STRIPE and NOP classes to the LINT build. - Disconnect gconcat(8) from the build. Supported by: Wheel - Open Technologies - http://www.wheel.pl
2004-05-20 10:37:13 +00:00
GEOM_STRIPE opt_geom.h
NB: This commit does *NOT* make GEOM the default in FreeBSD NB: But it will enable it in all kernels not having options "NO_GEOM" Put the GEOM related options into the intended order. Add "options NO_GEOM" to all kernel configs apart from NOTES. In some order of controlled fashion, the NO_GEOM options will be removed, architecture by architecture in the coming days. There are currently three known issues which may force people to need the NO_GEOM option: boot0cfg/fdisk: Tries to update the MBR while it is being used to control slices. GEOM does not allow this as a direct operation. SCSI floppy drives: Appearantly the scsi-da driver return "EBUSY" if no media is inserted. This is wrong, it should return ENXIO. PC98: It is unclear if GEOM correctly recognizes all variants of PC98 disklabels. (Help Wanted! I have neither docs nor HW) These issues are all being worked. Sponsored by: DARPA & NAI Labs.
2002-10-05 16:35:33 +00:00
GEOM_SUNLABEL opt_geom.h
Add geom_uzip -- geom class that implements read-only compressed disks. Currently supports cloop V2.0 disk compression format. May support more formats in future.
2004-08-13 09:40:58 +00:00
GEOM_UZIP opt_geom.h
Add config glue to add an optional GEOM_VOL to add optional volume support. Reviewed by: jake (mentor)
2003-02-03 17:35:54 +00:00
GEOM_VOL opt_geom.h
Connect GZERO to the build. MFC after: 3 days
2005-07-25 10:49:05 +00:00
GEOM_ZERO opt_geom.h
Some kernel threads try to do significant work, and the default KSTACK_PAGES doesn't give them enough stack to do much before blowing away the pcb. This adds MI and MD code to allow the allocation of an alternate kstack who's size can be speficied when calling kthread_create. Passing the value 0 prevents the alternate kstack from being created. Note that the ia64 MD code is missing for now, and PowerPC was only partially written due to the pmap.c being incomplete there. Though this patch does not modify anything to make use of the alternate kstack, acpi and usb are good candidates. Reviewed by: jake, peter, jhb
2002-10-02 07:44:29 +00:00
KSTACK_MAX_PAGES
Fixed some insertion sort errors.
2004-02-25 09:35:35 +00:00
KSTACK_PAGES
Add more options into the conf/options and i386/conf/options.i386 files and the #include hooks so that 'make depend' is more useful. This covers most of the options I regularly use (but not all) and some other easy ones.
1996-03-02 18:24:13 +00:00
KTRACE
According to Bruce, this file shouldn't have comments to describe what options do. Comments should be in NOTES and having the comments in two places usually means that one place will just bitrot. Thus, remove the comment for KTRACE_REQUEST_POOL from the previous revision. Requested by: bde
2002-06-07 14:33:23 +00:00
KTRACE_REQUEST_POOL opt_ktrace.h
Add function prototypes and base module for kernel side iconv library. Add simple "xlat" converter which performs 8to8 table based conversion. Unicode converter will be added in the near future. Reviewed by: silence on arch@ Files placement reviewed by: bde Obtained from: smbfs
2001-04-09 09:39:29 +00:00
LIBICONV
Improve consistency, ordering, style of options: - Remove extra blank lines - Sort options - Remove comments that belong in NOTES Submitted by: bde (older revision)
2003-04-15 19:43:52 +00:00
MAC
MAC_ALWAYS_LABEL_MBUF opt_mac.h
MAC_BIBA opt_dontuse.h
MAC_BSDEXTENDED opt_dontuse.h
MAC_DEBUG opt_mac.h
MAC_IFOFF opt_dontuse.h
MAC_LOMAC opt_dontuse.h
MAC_MLS opt_dontuse.h
MAC_NONE opt_dontuse.h
MAC_PARTITION opt_dontuse.h
MAC_PORTACL opt_dontuse.h
MAC_SEEOTHERUIDS opt_dontuse.h
Add MAC_STATIC, a kernel option that disables internal MAC Framework synchronization protecting against dynamic load and unload of MAC policies, and instead simply blocks load and unload. In a static configuration, this allows you to avoid the synchronization costs associated with introducing dynamicism. Obtained from: TrustedBSD Project Sponsored by: DARPA, McAfee Research
2004-05-03 20:53:05 +00:00
MAC_STATIC opt_mac.h
Hook up mac_stub to the modules Makefile. Hook up mac_stub in files and options. Reference mac_stub in NOTES.
2003-08-21 16:48:39 +00:00
MAC_STUB opt_dontuse.h
Improve consistency, ordering, style of options: - Remove extra blank lines - Sort options - Remove comments that belong in NOTES Submitted by: bde (older revision)
2003-04-15 19:43:52 +00:00
MAC_TEST opt_dontuse.h
Retire MFS_ROOT and MFS_ROOT_SIZE options from the MFS implementation. Add MD_ROOT and MD_ROOT_SIZE options to the md driver. Make the md driver handle MFS_ROOT and MFS_ROOT_SIZE options for compatibility. Add md driver to GENERIC, PCCARD and LINT. This is a cleanup which removes the need for some of the worse hacks in MFS: We really want to have a rootvnode but MFS on a preloaded image doesn't really have one. md is a true device, so it is less trouble. This has been tested with make release, and if people remember to add the "md" pseudo-device to their kernels, PicoBSD should be just fine as well. If people have no other use for MFS, it can be removed from the kernel.
1999-11-26 20:08:44 +00:00
MD_ROOT opt_md.h
MD_ROOT_SIZE opt_md.h
add options MPROF_BUFFERS and MPROF_HASH_SIZE that adjust the sizes of the mutex profiling buffers. Document them in the man page and in NOTES. Ensure _HASH_SIZE is larger than _BUFFERS with a cpp error.
2004-08-19 06:38:26 +00:00
MPROF_BUFFERS opt_mprof.h
MPROF_HASH_SIZE opt_mprof.h
Add a new kernel option MUTEX_WAKE_ALL that changes the mutex unlock code to awaken all waiters when a contested mutex is released instead of just the highest priority waiter. If the various threads are awakened in sequence then each thread may acquire and release the lock in question without contention resulting in fewer expensive unlock and lock operations. This old behavior of waking just the highest priority is still used if this option is specified. Making the algorithm conditional on a kernel option will allows us to benchmark both cases later and determine which one should be used by default. Requested by: tanimura-san
2004-04-06 19:12:24 +00:00
MUTEX_WAKE_ALL
Add support for reading directly from file to userland buffer when the O_DIRECT descriptor status flag is set and both offset and length is a multiple of the physical media sector size.
2003-03-26 23:40:42 +00:00
NSWBUF_MIN opt_swap.h
Move SHOW_BUSYBUFS and PANIC_REBOOT_WAIT_TIME into the MI options file, since MI code uses them, and every platform provides them (except x86_64 whose options file was lacking one). Reviewed by: bde, rwatson
2002-11-18 06:17:07 +00:00
PANIC_REBOOT_WAIT_TIME opt_panic.h
Make POWERFAIL_NMI, PPS_SYNC and NATM new style options. This also fixes a couple of defunct options; submitted by bde.
1998-01-31 05:00:21 +00:00
PPS_SYNC opt_ntp.h
The puc(4) driver/bridge is MI, so don't bury it in MD options and files config files. It also depends on PCI.
2002-07-15 15:39:10 +00:00
PUC_FASTINTR opt_puc.h
Sorted options.
1996-12-23 18:42:02 +00:00
QUOTA
- Introduce the SCHED_ULE and SCHED_4BSD options for compile time selection of the scheduler. - Add SCHED_4BSD as the scheduler for all kernel config files in cvs.
2003-01-26 05:29:12 +00:00
SCHED_4BSD opt_sched.h
SCHED_ULE opt_sched.h
Move SHOW_BUSYBUFS and PANIC_REBOOT_WAIT_TIME into the MI options file, since MI code uses them, and every platform provides them (except x86_64 whose options file was lacking one). Reviewed by: bde, rwatson
2002-11-18 06:17:07 +00:00
SHOW_BUSYBUFS
Add two new kernel options to allow rudimentary profiling of the internal hash tables used in the sleep queue and turnstile code. Each option adds a sysctl tree under debug containing the maximum depth of any bucket in the hash table as well as a separate node for each bucket (or chain) containing the current depth and maximum depth for that bucket.
2004-06-29 02:30:12 +00:00
SLEEPQUEUE_PROFILING
Add options for sl811. Pointed out by: nyan
2005-07-15 05:12:49 +00:00
SLHCI_DEBUG opt_slhci.h
Make SPX_HACK a new-style option.
1998-02-04 04:12:29 +00:00
SPX_HACK
Turn NSWAPDEV into a new-style option.
1998-01-25 04:13:25 +00:00
SUIDDIR opt_suiddir.h
Sort all the SYSV IPC options. They are still all clumped together, but at least they are sorted relative to themselves now.
2002-07-15 15:28:16 +00:00
MSGMNB opt_sysvipc.h
MSGMNI opt_sysvipc.h
MSGSEG opt_sysvipc.h
MSGSSZ opt_sysvipc.h
MSGTQL opt_sysvipc.h
Move the MSG* and SEM* options to opt_sysvipc.h Remove evil allocation macros from machdep.c (why was that there???) and use malloc() instead. Move paramters out of param.h and into the code itself. Move a bunch of internal definitions from public sys/*.h headers (without #ifdef _KERNEL even) into the code itself. I had hoped to make some of this more dynamic, but the cost of doing wakeups on all sleeping processes on old arrays was too frightening. The other possibility is to initialize on the first use, and allow dynamic sysctl changes to parameters right until that point. That would allow /etc/rc.sysctl to change SEM* and MSG* defaults as we presently do with SHM*, but without the nightmare of changing a running system.
2000-05-01 13:33:56 +00:00
SEMMAP opt_sysvipc.h
SEMMNI opt_sysvipc.h
SEMMNS opt_sysvipc.h
SEMMNU opt_sysvipc.h
SEMMSL opt_sysvipc.h
SEMOPM opt_sysvipc.h
SEMUME opt_sysvipc.h
Sort all the SYSV IPC options. They are still all clumped together, but at least they are sorted relative to themselves now.
2002-07-15 15:28:16 +00:00
SHMALL opt_sysvipc.h
SHMMAX opt_sysvipc.h
SHMMAXPGS opt_sysvipc.h
SHMMIN opt_sysvipc.h
SHMMNI opt_sysvipc.h
SHMSEG opt_sysvipc.h
SYSVMSG opt_sysvipc.h
SYSVSEM opt_sysvipc.h
SYSVSHM opt_sysvipc.h
Rename the WATCHDOG option to SW_WATCHDOG and make it use the generic watchdoc(9) interface. Make watchdogd(8) perform as watchdog(8) as well, and make it possible to specify a check command to run, timeout and sleep periods. Update watchdog(4) to talk about the generic interface and add new watchdog(8) page.
2004-02-28 20:56:35 +00:00
SW_WATCHDOG opt_watchdog.h
Add two new kernel options to allow rudimentary profiling of the internal hash tables used in the sleep queue and turnstile code. Each option adds a sysctl tree under debug containing the maximum depth of any bucket in the hash table as well as a separate node for each bucket (or chain) containing the current depth and maximum depth for that bucket.
2004-06-29 02:30:12 +00:00
TURNSTILE_PROFILING
Fixed some insertion sort errors.
2004-02-25 09:35:35 +00:00
TTYHOG opt_tty.h
Add the VFS_AIO config option and leave it off by default. Unless the VFS_AIO option is specified, all aio-related syscalls return ENOSYS. The aio code is very fragile right now, and is unsuitable for default inclusion in a production shell box. Approved by: jkh
2000-02-23 07:44:25 +00:00
VFS_AIO
Make WLCACHE and WLDEBUG MI options.
2002-07-15 15:21:51 +00:00
WLCACHE opt_wavelan.h
WLDEBUG opt_wavelan.h
Hide options for emulators and static file systems in opt_dontuse.h. These options only apply at config time. Using them at compile time would break the corresponding lkms.
1996-05-11 04:39:53 +00:00
Finish _POSIX_PRIORITY_SCHEDULING. Needs P1003_1B and _KPOSIX_PRIORITY_SCHEDULING options to work. Changes: Change all "posix4" to "p1003_1b". Misnamed files are left as "posix4" until I'm told if I can simply delete them and add new ones; Add _POSIX_PRIORITY_SCHEDULING system calls for FreeBSD and Linux; Add man pages for _POSIX_PRIORITY_SCHEDULING system calls; Add options to LINT; Minor fixes to P1003_1B code during testing.
1998-03-28 11:51:01 +00:00
# POSIX kernel options
Regen for added syscalls.
2002-09-19 00:48:57 +00:00
P1003_1B_SEMAPHORES opt_posix.h
Fixed some insertion sort errors.
2004-02-25 09:35:35 +00:00
_KPOSIX_PRIORITY_SCHEDULING opt_posix.h
Reviewed by: msmith, bde long ago POSIX.4 headers and sysctl variables. Nothing should change unless POSIX4 is defined or _POSIX_VERSION is set to 199309.
1998-03-04 10:27:00 +00:00
Put INCLUDE_CONFIG_FILE into opt_config.h rather than the CFLAGS line
1996-12-26 23:38:17 +00:00
# Do we want the config file compiled into the kernel?
INCLUDE_CONFIG_FILE opt_config.h
More s/file system/filesystem/g
2002-05-16 21:28:32 +00:00
# Options for static filesystems. These should only be used at config
Hide options for emulators and static file systems in opt_dontuse.h. These options only apply at config time. Using them at compile time would break the corresponding lkms.
1996-05-11 04:39:53 +00:00
# time, since the corresponding lkms cannot work if there are any static
# dependencies. Unusability is enforced by hiding the defines for the
# options in a never-included header.
Clean up some leftovers from the root mount cleanup that was done some time ago. FFS_ROOT and CD9660_ROOT are obsolete.
2001-02-04 15:35:10 +00:00
CD9660 opt_dontuse.h
CODA opt_dontuse.h
EXT2FS and MSDOSFS to the opt_dontuse bin.
1997-12-16 23:59:37 +00:00
EXT2FS opt_dontuse.h
- FDESC, FIFO, NULL, PORTAL, PROC, UMAP and UNION file systems were repo-copied from sys/miscfs to sys/fs. - Renamed the following file systems and their modules: fdesc -> fdescfs, portal -> portalfs, union -> unionfs. - Renamed corresponding kernel options: FDESC -> FDESCFS, PORTAL -> PORTALFS, UNION -> UNIONFS. - Install header files for the above file systems. - Removed bogus -I${.CURDIR}/../../sys CFLAGS from userland Makefiles.
2001-05-23 09:42:29 +00:00
FDESCFS opt_dontuse.h
Improve consistency, ordering, style of options: - Remove extra blank lines - Sort options - Remove comments that belong in NOTES Submitted by: bde (older revision)
2003-04-15 19:43:52 +00:00
HPFS opt_dontuse.h
Add the LINPROCFS option. Forgotten by: peter
2001-03-01 23:13:12 +00:00
LINPROCFS opt_dontuse.h
EXT2FS and MSDOSFS to the opt_dontuse bin.
1997-12-16 23:59:37 +00:00
MSDOSFS opt_dontuse.h
Improve consistency, ordering, style of options: - Remove extra blank lines - Sort options - Remove comments that belong in NOTES Submitted by: bde (older revision)
2003-04-15 19:43:52 +00:00
NTFS opt_dontuse.h
Hide options for emulators and static file systems in opt_dontuse.h. These options only apply at config time. Using them at compile time would break the corresponding lkms.
1996-05-11 04:39:53 +00:00
NULLFS opt_dontuse.h
Clean up some leftovers from the root mount cleanup that was done some time ago. FFS_ROOT and CD9660_ROOT are obsolete.
2001-02-04 15:35:10 +00:00
NWFS opt_dontuse.h
- FDESC, FIFO, NULL, PORTAL, PROC, UMAP and UNION file systems were repo-copied from sys/miscfs to sys/fs. - Renamed the following file systems and their modules: fdesc -> fdescfs, portal -> portalfs, union -> unionfs. - Renamed corresponding kernel options: FDESC -> FDESCFS, PORTAL -> PORTALFS, UNION -> UNIONFS. - Install header files for the above file systems. - Removed bogus -I${.CURDIR}/../../sys CFLAGS from userland Makefiles.
2001-05-23 09:42:29 +00:00
PORTALFS opt_dontuse.h
Hide options for emulators and static file systems in opt_dontuse.h. These options only apply at config time. Using them at compile time would break the corresponding lkms.
1996-05-11 04:39:53 +00:00
PROCFS opt_dontuse.h
Add a PSEUDOFS option to allow pseudofs to be built statically.
2001-06-11 10:58:07 +00:00
PSEUDOFS opt_dontuse.h
Connect reiserfs build to every platforms, not only i386 and pc98. Reviewed by: mux (mentor) Approved by: re (dougb)
2005-06-21 10:17:55 +00:00
REISERFS opt_dontuse.h
Move SMBFS from i386 and pc98 files and options files to MI files and options files.
2002-07-15 19:11:21 +00:00
SMBFS opt_dontuse.h
Add a filesystem driver for the Universal Disk Format. For more info, see http://people.freebsd.org/~scottl/udf MFC after: when asmodai gets the backport done Prodded by: phk asmodai des
2002-04-14 16:36:49 +00:00
UDF opt_dontuse.h
Improve consistency, ordering, style of options: - Remove extra blank lines - Sort options - Remove comments that belong in NOTES Submitted by: bde (older revision)
2003-04-15 19:43:52 +00:00
UMAPFS opt_dontuse.h
UNIONFS opt_dontuse.h
Hide options for emulators and static file systems in opt_dontuse.h. These options only apply at config time. Using them at compile time would break the corresponding lkms.
1996-05-11 04:39:53 +00:00
Add PSEUDOFS_TRACE option.
2005-03-14 16:04:27 +00:00
# Pseudofs debugging
PSEUDOFS_TRACE opt_pseudofs.h
Sigh. ufs_lookup() calls ffs_snapgone(), meaning that 'options EXT2FS' without 'options FFS' would fail to link.
2001-08-18 03:08:48 +00:00
# Broken - ffs_snapshot() dependency from ufs_lookup() :-(
FFS opt_ffs_broken_fixme.h
Improve consistency, ordering, style of options: - Remove extra blank lines - Sort options - Remove comments that belong in NOTES Submitted by: bde (older revision)
2003-04-15 19:43:52 +00:00
# These static filesystems have one slightly bogus static dependency in
Make all file-system (MFS, FFS, NFS, LFS, DEVFS) related option new-style. This introduce an xxxFS_BOOT for each of the rootable filesystems. (Presently not required, but encouraged to allow a smooth move of option *FS to opt_dontuse.h later.) LFS is temporarily disabled, and will be re-enabled tomorrow.
1998-01-24 02:54:56 +00:00
# sys/i386/i386/autoconf.c. If any of these filesystems are
# statically compiled into the kernel, code for mounting them as root
Clean up some leftovers from the root mount cleanup that was done some time ago. FFS_ROOT and CD9660_ROOT are obsolete.
2001-02-04 15:35:10 +00:00
# filesystems will be enabled - but look below.
Cleanup and split of nfs client and server code. This builds on the top of several repo-copies.
2001-09-18 23:32:09 +00:00
NFSCLIENT opt_nfs.h
NFSSERVER opt_nfs.h
This mega-commit brings the following: . It makes cd9660 root f/s working again. . It makes CD9660 a new-style option. . It adds support to mount an ISO9660 multi-session CD-ROM as the root filesystem (the last session actually, but that's what is expected behaviour). Sigh. The CDIOREADTOCENTRYS did a copyout() of its own, and thus has been unusable for me for this work. Too bad it didn't simply stuff the max 100 entries into the struct ioc_read_toc_entry, but relied on a user supplied data buffer instead. :-( I now had to reinvent the wheel, and created a CDIOREADTOCENTRY ioctl command that can be used in a kernel context. While doing this, i noticed the following bogosities in existing CD-ROM drivers: wcd: This driver is likely to be totally bogus when someone tries two succeeding CDIOREADTOCENTRYS (or now CDIOREADTOCENTRY) commands with requesting MSF format, since it apparently operates on an internal table. scd: This driver apparently returns just a single TOC entry only for the CDIOREADTOCENTRYS command. I have only been able to test the CDIOREADTOCENTRY command with the cd(4) driver. I hereby request the respective maintainers of the other CD-ROM drivers to verify my code for their driver. When it comes to merging this CD-ROM multisession stuff into RELENG_2_2 i will only consider drivers where i've got a confirmation that it actually works.
1997-05-04 15:24:23 +00:00
- Support for multibyte charsets in LIBICONV. - CD9660_ICONV, NTFS_ICONV and MSDOSFS_ICONV kernel options (with corresponding modules). - kiconv(3) for loadable charset conversion tables support. Submitted by: Ryuichiro Imura <imura@ryu16.org>
2003-09-26 20:26:25 +00:00
# filesystems and libiconv bridge
CD9660_ICONV opt_dontuse.h
MSDOSFS_ICONV opt_dontuse.h
NTFS_ICONV opt_dontuse.h
Hook the udf_iconv module up to the kernel build. Submitted by: imura@ryu16.org
2003-11-05 06:38:14 +00:00
UDF_ICONV opt_dontuse.h
- Support for multibyte charsets in LIBICONV. - CD9660_ICONV, NTFS_ICONV and MSDOSFS_ICONV kernel options (with corresponding modules). - kiconv(3) for loadable charset conversion tables support. Submitted by: Ryuichiro Imura <imura@ryu16.org>
2003-09-26 20:26:25 +00:00
KAME netinet6 basic part(no IPsec,no V6 Multicast Forwarding, no UDP/TCP for IPv6 yet) With this patch, you can assigne IPv6 addr automatically, and can reply to IPv6 ping. Reviewed by: freebsd-arch, cvs-committers Obtained from: KAME project
1999-11-22 02:45:11 +00:00
# If you are following the conditions in the copyright,
# you can enable soft-updates which will speed up a lot of thigs
Reviewed by: dyson@freebsd.org (john Dyson), dg@root.com (david greenman) Submitted by: Kirk McKusick (mcKusick@mckusick.com) Obtained from: WHistle development tree
1998-03-08 09:59:44 +00:00
# and make the system safer from crashes at the same time.
# otherwise a STUB module will be compiled in.
SOFTUPDATES opt_ffs.h
Introduce support for POSIX.1e ACLs on UFS-based file systems. This implementation is still experimental, and while fairly broadly tested, is not yet intended for production use. Support for POSIX.1e ACLs on UFS will not be MFC'd to RELENG_4. This implementation works by providing implementations of VOP_[GS]ETACL() for FFS, as well as modifying the appropriate access control and file creation routines. In this implementation, ACLs are backed into extended attributes; the base ACL (owner, group, other) permissions remain in the inode for performance and compatibility reasons, so only the extended and default ACLs are placed in extended attributes. The logic for ACL evaluation is provided by the fs-independent kern/kern_acl.c. o Introduce UFS_ACL, a compile-time configuration option that enables support for ACLs on FFS (and potentially other UFS-based file systems). o Introduce ufs_getacl(), ufs_setacl(), ufs_aclcheck(), which respectively get, set, and check the ACLs on the passed vnode. o Introduce ufs_sync_acl_from_inode(), ufs_sync_inode_from_acl() to maintain access control information between inode permissions and extended attribute data. o Modify ufs_access() to load a file access ACL and invoke vaccess_acl_posix1e() if ACLs are available on the file system o Modify ufs_mkdir() and ufs_makeinode() to associate ACLs with newly created directories and files, inheriting from the parent directory's default ACL. o Enable these new vnode operations and conditionally compiled code paths if UFS_ACL is defined. A few notes: o This implementation is fairly widely tested, but still should be considered experimental. o Currently, ACLs are not exported via NFS, instead, the summarizing file mode/etc from the inode is. This results in conservative protection behavior, similar to the behavior of ACL-nonaware programs acting locally. o It is possible that underlying binary data formats associated with this implementation may change. Consumers of the implementation should expect to find their local configuration obsoleted in the next few months, resulting in possible loss of ACL data during an upgrade. o The extended attributes interface and implementation is still undergoing modification to address portable interface concerns, as well as performance. o Many applications do not yet correctly handle ACLs. In general, due to the POSIX.1e ACL model, behavior of ACL-unaware applications will be conservative with respects to file protection; some caution is recommended. o Instructions for configuring and maintaining ACLs on UFS will be committed in the near future; in the mean time it is possible to reference the README included in the last UFS ACL distribution placed in the TrustedBSD web site: http://www.TrustedBSD.org/downloads/ Substantial debugging, hardware, travel, or connectivity support for this project was provided by: BSDi, Safeport Network Services, and NAI Labs. Significant coding contributions were made by Chris Faulhaber. Additional support was provided by Brian Feldman, Thomas Moestl, and Ilmar Habibulin. Reviewed by: jedgar, keichii, mckusick, trustedbsd-discuss, freebsd-fs Obtained from: TrustedBSD Project
2001-03-26 17:53:19 +00:00
# Enabling this option turns on support for Access Control Lists in UFS,
# which can be used to support high security configurations. Depends on
# UFS_EXTATTR.
UFS_ACL opt_ufs.h
o Change options FFS_EXTATTR and options FFS_EXTATTR_AUTOSTART to options UFS_EXTATTR and UFS_EXTATTR_AUTOSTART respectively. This change reflects the fact that our EA support is implemented entirely at the UFS layer (modulo FFS start/stop/autostart hooks for mount and unmount events). This also better reflects the fact that [shortly] MFS will also support EAs, as well as possibly IFS. o Consumers of the EA support in FFS are reminded that as a result, they must change kernel config files to reflect the new option names. Obtained from: TrustedBSD Project
2001-03-19 04:35:40 +00:00
# Enabling this option turns on support for extended attributes in UFS-based
More s/file system/filesystem/g
2002-05-16 21:28:32 +00:00
# filesystems, which can be used to support high security configurations
# as well as new filesystem features.
o Change options FFS_EXTATTR and options FFS_EXTATTR_AUTOSTART to options UFS_EXTATTR and UFS_EXTATTR_AUTOSTART respectively. This change reflects the fact that our EA support is implemented entirely at the UFS layer (modulo FFS start/stop/autostart hooks for mount and unmount events). This also better reflects the fact that [shortly] MFS will also support EAs, as well as possibly IFS. o Consumers of the EA support in FFS are reminded that as a result, they must change kernel config files to reflect the new option names. Obtained from: TrustedBSD Project
2001-03-19 04:35:40 +00:00
UFS_EXTATTR opt_ufs.h
UFS_EXTATTR_AUTOSTART opt_ufs.h
Introduce extended attribute support for FFS, allowing arbitrary (name, value) pairs to be associated with inodes. This support is used for ACLs, MAC labels, and Capabilities in the TrustedBSD security extensions, which are currently under development. In this implementation, attributes are backed to data vnodes in the style of the quota support in FFS. Support for FFS extended attributes may be enabled using the FFS_EXTATTR kernel option (disabled by default). Userland utilities and man pages will be committed in the next batch. VFS interfaces and man pages have been in the repo since 4.0-RELEASE and are unchanged. o ufs/ufs/extattr.h: UFS-specific extattr defines o ufs/ufs/ufs_extattr.c: bulk of support routines o ufs/{ufs,ffs,mfs}/*.[ch]: hooks and extattr.h includes o contrib/softupdates/ffs_softdep.c: extattr.h includes o conf/options, conf/files, i386/conf/LINT: added FFS_EXTATTR o coda/coda_vfsops.c: XXX required extattr.h due to ufsmount.h (This should not be the case, and will be fixed in a future commit) Currently attributes are not supported in MFS. This will be fixed. Reviewed by: adrian, bp, freebsd-fs, other unthanked souls Obtained from: TrustedBSD Project
2000-04-15 03:34:27 +00:00
Bring in dirhash, a simple hash-based lookup optimisation for large directories. When enabled via "options UFS_DIRHASH", in-core hash arrays are maintained for large directories. These allow all directory operations to take place quickly instead of requiring long linear searches. For now anyway, dirhash is not enabled by default. The in-core hash arrays have a memory requirement that is approximately half the size of the size of the on-disk directory file. A number of new sysctl variables allow control over which directories get hashed and over the maximum amount of memory that dirhash will use: vfs.ufs.dirhash_minsize The minimum on-disk directory size for which hashing should be used. The default is 2560 (2.5k). vfs.ufs.dirhash_maxmem The system-wide maximum total memory to be used by dirhash data structures. The default is 2097152 (2MB). The current amount of memory being used by dirhash is visible through the read-only sysctl variable vfs.ufs.dirhash_maxmem. Finally, some extra sanity checks that are enabled by default, but which may have an impact on performance, can be disabled by setting vfs.ufs.dirhash_docheck to 0. Discussed on: -fs, -hackers
2001-07-10 21:21:29 +00:00
# Enable fast hash lookups for large directories on UFS-based filesystems.
UFS_DIRHASH opt_ufs.h
Improve consistency, ordering, style of options: - Remove extra blank lines - Sort options - Remove comments that belong in NOTES Submitted by: bde (older revision)
2003-04-15 19:43:52 +00:00
# The below sentence is not in English, and neither is this one.
# We plan to remove the static dependences above, with a
Make all file-system (MFS, FFS, NFS, LFS, DEVFS) related option new-style. This introduce an xxxFS_BOOT for each of the rootable filesystems. (Presently not required, but encouraged to allow a smooth move of option *FS to opt_dontuse.h later.) LFS is temporarily disabled, and will be re-enabled tomorrow.
1998-01-24 02:54:56 +00:00
# <filesystem>_ROOT option to control if it usable as root. This list
# allows these options to be present in config files already (though
# they won't make any difference yet).
convert some nfs tunables to options, these are: NFS_MINATTRTIMO VREG attrib cache timeout in sec NFS_MAXATTRTIMO NFS_MINDIRATTRTIMO VDIR attrib cache timeout in sec NFS_MAXDIRATTRTIMO NFS_GATHERDELAY Default write gather delay (msec) NFS_UIDHASHSIZ Tune the size of nfssvc_sock with this NFS_WDELAYHASHSIZ and with this NFS_MUIDHASHSIZ Tune the size of nfsmount with this NFS_NOSERVER (already documented in LINT) NFS_DEBUG turn on NFS debugging also, because NFS_ROOT is used by very different files, it has been renamed to opt_nfsroot.h instead of the old opt_nfs.h....
1998-06-30 03:01:37 +00:00
NFS_ROOT opt_nfsroot.h
Make all file-system (MFS, FFS, NFS, LFS, DEVFS) related option new-style. This introduce an xxxFS_BOOT for each of the rootable filesystems. (Presently not required, but encouraged to allow a smooth move of option *FS to opt_dontuse.h later.) LFS is temporarily disabled, and will be re-enabled tomorrow.
1998-01-24 02:54:56 +00:00
Move SMBFS from i386 and pc98 files and options files to MI files and options files.
2002-07-15 19:11:21 +00:00
# SMB/CIFS requester
NETSMB opt_netsmb.h
NETSMBCRYPTO opt_netsmb.h
By popular request, add a workaround that allows large (>128GB or so) FAT32 filesystems to be mounted, subject to some fairly serious limitations. This works by extending the internal pseudo-inode-numbers generated from the file's starting cluster number to 64-bits, then creating a table mapping these into arbitrary 32-bit inode numbers, which can fit in struct dirent's d_fileno and struct vattr's va_fileid fields. The mappings do not persist across unmounts or reboots, so it's not possible to export these filesystems through NFS. The mapping table may grow to be rather large, and may grow large enough to exhaust kernel memory on filesystems with millions of files. Don't enable this option unless you understand the consequences.
2004-07-03 13:22:38 +00:00
# Experimental support for large MS-DOS filesystems; SEE WARNING IN "NOTES"!
MSDOSFS_LARGE opt_msdosfs.h
Move MAXUSERS out of opt_param.h to make sure that other code doesn't use it rather than the tunable version.
2001-07-26 23:05:35 +00:00
# Options used only in subr_param.c.
add HZ missing in options. changing HZ used to break xntpd's PLL but it should be ok now (unless xntpd is misconfigured).
1999-01-14 03:30:48 +00:00
HZ opt_param.h
Allow setting MAXFILES in the kernel config.
1999-04-09 16:28:11 +00:00
MAXFILES opt_param.h
Sorted options.
1996-12-23 18:42:02 +00:00
NBUF opt_param.h
Add more options into the conf/options and i386/conf/options.i386 files and the #include hooks so that 'make depend' is more useful. This covers most of the options I regularly use (but not all) and some other easy ones.
1996-03-02 18:24:13 +00:00
NMBCLUSTERS opt_param.h
Implemented zero-copy TCP/IP extensions via sendfile(2) - send a file to a stream socket. sendfile(2) is similar to implementations in HP-UX, Linux, and other systems, but the API is more extensive and addresses many of the complaints that the Apache Group and others have had with those other implementations. Thanks to Marc Slemko of the Apache Group for helping me work out the best API for this. Anyway, this has the "net" result of speeding up sends of files over TCP/IP sockets by about 10X (that is to say, uses 1/10th of the CPU cycles) when compared to a traditional read/write loop.
1998-11-05 14:28:26 +00:00
NSFBUFS opt_param.h
Limit the amount of KVM reserved for the buffer cache and for swap-meta information. The default limits only effect machines with > 1GB of ram and can be overriden with two new kernel conf variables VM_SWZONE_SIZE_MAX and VM_BCACHE_SIZE_MAX, or with loader variables kern.maxswzone and kern.maxbcache. This has the effect of leaving more KVM available for sizing NMBCLUSTERS and 'maxusers' and should avoid tripups where a sysad adds memory to a machine and then sees the kernel panic on boot due to running out of KVM. Also change the default swap-meta auto-sizing calculation to allocate half of what it was previously allocating. The prior defaults were way too high. Note that we cannot afford to run out of swap-meta structures so we still stay somewhat conservative here.
2001-08-20 00:41:12 +00:00
VM_BCACHE_SIZE_MAX opt_param.h
VM_SWZONE_SIZE_MAX opt_param.h
Move MAXUSERS out of opt_param.h to make sure that other code doesn't use it rather than the tunable version.
2001-07-26 23:05:35 +00:00
MAXUSERS
Make MAXTSIZ, DFLDSIZ, MAXDSIZ, DFLSSIZ, MAXSSIZ, SGROWSIZ loader tunable. Reviewed by: peter MFC after: 2 weeks
2001-10-10 23:06:54 +00:00
DFLDSIZ opt_param.h
MAXDSIZ opt_param.h
MAXSSIZ opt_param.h
Added newlines and punctuation. Removed defunct options. It will be easy to keep track of bogus options by looking at CFLAGS when all real options are moved out of CFLAGS.
1996-03-29 13:51:30 +00:00
# Generic SCSI options.
Update for CAM.
1998-09-15 09:59:15 +00:00
CAM_MAX_HIGHPOWER opt_cam.h
CAMDEBUG opt_cam.h
Add CAM_DEBUG_DELAY option.
1999-08-16 22:39:53 +00:00
CAM_DEBUG_DELAY opt_cam.h
Update for CAM.
1998-09-15 09:59:15 +00:00
CAM_DEBUG_BUS opt_cam.h
CAM_DEBUG_TARGET opt_cam.h
CAM_DEBUG_LUN opt_cam.h
CAM_DEBUG_FLAGS opt_cam.h
Add CAM_NEW_TRAN_CODE as an option (to be included in opt_cam.h).
2001-06-24 18:15:58 +00:00
CAM_NEW_TRAN_CODE opt_cam.h
Sorted options.
1996-12-23 18:42:02 +00:00
SCSI_DELAY opt_scsi.h
Update for CAM.
1998-09-15 09:59:15 +00:00
SCSI_NO_SENSE_STRINGS opt_scsi.h
SCSI_NO_OP_STRINGS opt_scsi.h
# Options used only in cam/scsi/scsi_cd.c
CHANGER_MIN_BUSY_SECONDS opt_cd.h
CHANGER_MAX_BUSY_SECONDS opt_cd.h
Added newlines and punctuation. Removed defunct options. It will be easy to keep track of bogus options by looking at CFLAGS when all real options are moved out of CFLAGS.
1996-03-29 13:51:30 +00:00
Fix short timeout problems with the pt(4) driver: - increase the default timeout from 10 seconds to 60 seconds - add a new kernel option, SCSI_PT_DEFAULT_TIMEOUT, that lets users specify the default timeout for the pt driver to use - add two new ioctls, one to get the timeout for a given pt device, the other to set the timeout for a given pt device. The idea is that userland applications using the device can set the timeout to suit their purposes. The ioctls are defined in a new header file, sys/ptio.h PR: 10266 Reviewed by: gibbs, joerg
1999-08-20 03:48:11 +00:00
# Options used only in cam/scsi/scsi_sa.c.
A slightly more complete change to timeouts: 1. Add SA_IO_TIMEOUT as an option (4 minutes default) to cover reads, writes, wfm, test unit ready. 2. Add internal SCSIOP_TIMEOUT (e.g., for mode sense) at 1 minute. This should not require an option, but is cleaner to parameterize. MFC after: 1 week
2001-07-02 17:48:59 +00:00
SA_IO_TIMEOUT opt_sa.h
Patches from DES to create three new kernel config options to control timeouts in the SA driver (timeouts for space, rewind and erase). Folks can lengthen the timeouts if their hardware is especially slow, or shorten them if they want to be notified of errors a little sooner. Also, get rid of two OD driver options. The od driver has been made obsolete by the da driver. Reviewed by: ken, gibbs Submitted by: Dag-Erling Coidan Smørgrav <des@FreeBSD.ORG>
1998-10-02 05:15:51 +00:00
SA_SPACE_TIMEOUT opt_sa.h
SA_REWIND_TIMEOUT opt_sa.h
SA_ERASE_TIMEOUT opt_sa.h
add SA_1FM_AT_EOD option for scsi_sa- this causes a default behaviour of one filemark at end of media for tapes otherwise neither quirked nor known.
1999-10-02 20:23:52 +00:00
SA_1FM_AT_EOD opt_sa.h
Miscellaneous cleanup and minor fixes by Shunsuke and by me. . use new-style options . introduce an option OD_AUTO_TURNOFF . try to use the native geometry as reported by the drive instead of a faked on -- MOs do have a ``classical'' geometry . make the scsi_start_unit() actually working . some cosmetic fixes Submitted by: akiyama@kme.mei.co.jp (Shunsuke Akiyama)
1996-06-16 19:58:24 +00:00
Fix short timeout problems with the pt(4) driver: - increase the default timeout from 10 seconds to 60 seconds - add a new kernel option, SCSI_PT_DEFAULT_TIMEOUT, that lets users specify the default timeout for the pt driver to use - add two new ioctls, one to get the timeout for a given pt device, the other to set the timeout for a given pt device. The idea is that userland applications using the device can set the timeout to suit their purposes. The ioctls are defined in a new header file, sys/ptio.h PR: 10266 Reviewed by: gibbs, joerg
1999-08-20 03:48:11 +00:00
# Options used only in cam/scsi/scsi_pt.c
SCSI_PT_DEFAULT_TIMEOUT opt_pt.h
add options collateral for SES/SAF-TE driver
2000-01-15 07:12:09 +00:00
# Options used only in cam/scsi/scsi_ses.c
SES_ENABLE_PASSTHROUGH opt_ses.h
Add options used by the `sym' (Symbios SCSI) driver. SYM_SETUP_LP_PROBE_MAP Low Priority Probe Map (bits) SYM_SETUP_SCSI_DIFF HVD support for 825a, 875, 885 SYM_SETUP_PCI_PARITY PCI parity checking SYM_SETUP_MAX_LUN Number of LUNs supported Submitted by: Gerard Roudier <groudier@club-internet.fr>
1999-12-16 16:09:57 +00:00
# Options used in dev/sym/ (Symbios SCSI driver).
SYM_SETUP_LP_PROBE_MAP opt_sym.h #-Low Priority Probe Map (bits)
# Allows the ncr to take precedence
# 1 (1<<0) -> 810a, 860
# 2 (1<<1) -> 825a, 875, 885, 895
# 4 (1<<2) -> 895a, 896, 1510d
SYM_SETUP_SCSI_DIFF opt_sym.h #-HVD support for 825a, 875, 885
# disabled:0 (default), enabled:1
SYM_SETUP_PCI_PARITY opt_sym.h #-PCI parity checking
# disabled:0, enabled:1 (default)
SYM_SETUP_MAX_LUN opt_sym.h #-Number of LUNs supported
# default:8, range:[1..64]
Add options for NCR driver.
1996-12-15 16:35:54 +00:00
# Options used only in pci/ncr.c
Sorted options.
1996-12-23 18:42:02 +00:00
SCSI_NCR_DEBUG opt_ncr.h
Fixed spelling of SCSI_NCR_MAX*.
1996-12-23 18:40:40 +00:00
SCSI_NCR_MAX_SYNC opt_ncr.h
SCSI_NCR_MAX_WIDE opt_ncr.h
Sorted options.
1996-12-23 18:42:02 +00:00
SCSI_NCR_MYADDR opt_ncr.h
Add options for NCR driver.
1996-12-15 16:35:54 +00:00
D'oh! I forgot to commit this a while back. Add an option for enabling f/w crashdumps for the isp driver. MFC after: 1 week
2002-04-04 23:54:58 +00:00
# Options used only in dev/isp/*
Add in new Qlogic isp config options: ISP_COMPILE_1020_FW compile in Qlogic 1020/1040 PCI SCSI f/w ISP_COMPILE_1080_FW compile in Qlogic 1080/1240/1280 PCI LVD SCSI f/w ISP_COMPILE_2100_FW compile in Qlogic 2100 Fibre Channel f/w ISP_COMPILE_2200_FW compile in Qlogic 2200 Fibre Channel f/w ISP_COMPILE_FW compile in all firmware (overrides the others) These are not on by default, thus saving about 200KBytes. Additionally: SCSI_ISP_WWN to define a WWN to use
1999-11-21 03:00:19 +00:00
ISP_TARGET_MODE opt_isp.h
D'oh! I forgot to commit this a while back. Add an option for enabling f/w crashdumps for the isp driver. MFC after: 1 week
2002-04-04 23:54:58 +00:00
ISP_FW_CRASH_DUMP opt_isp.h
add isp host adapter specific options
1999-02-09 01:02:37 +00:00
Add the options for the ATA driver.
1999-10-09 20:22:01 +00:00
# Options used in the 'ata' ATA/ATAPI driver
ATA_STATIC_ID opt_ata.h
Remove dependency on NPCI. Use 'options ATA_NOPCI' to compile without pci support. This really needs to be fixed properly some day, but judging by the fact that the nopci case hasn't compiled for quite a while, there does not seem to be much urgency. Reviewed by: sos
2002-07-21 21:37:09 +00:00
ATA_NOPCI opt_ata.h
Add the options for the ATA driver.
1999-10-09 20:22:01 +00:00
Added newlines and punctuation. Removed defunct options. It will be easy to keep track of bogus options by looking at CFLAGS when all real options are moved out of CFLAGS.
1996-03-29 13:51:30 +00:00
# Net stuff.
return of the accept filter part II accept filters are now loadable as well as able to be compiled into the kernel. two accept filters are provided, one that returns sockets when data arrives the other when an http request is completed (doesn't work with 0.9 requests) Reviewed by: jmg
2000-06-20 01:09:23 +00:00
ACCEPT_FILTER_DATA
ACCEPT_FILTER_HTTP
Link ALTQ to the build and break with ABI for struct ifnet. Please recompile your (network) modules as well as any userland that might make sense of sizeof(struct ifnet). This does not change the queueing yet. These changes will follow in a seperate commit. Same with the driver changes, which need case by case evaluation. __FreeBSD_version bump will follow. Tested-by: (i386)LINT
2004-06-13 17:29:10 +00:00
ALTQ opt_global.h
ALTQ_CBQ opt_altq.h
ALTQ_RED opt_altq.h
ALTQ_RIO opt_altq.h
ALTQ_HFSC opt_altq.h
ALTQ_CDNR opt_altq.h
ALTQ_PRIQ opt_altq.h
ALTQ_NOPCC opt_altq.h
ALTQ_DEBUG opt_altq.h
Change the following environment variables to kernel options: bootp -> BOOTP bootp.nfsroot -> BOOTP_NFSROOT bootp.nfsv3 -> BOOTP_NFSV3 bootp.compat -> BOOTP_COMPAT bootp.wired_to -> BOOTP_WIRED_TO - i.e. back out the previous commit. It's already possible to pxeboot(8) with a GENERIC kernel. Pointed out by: dwmalone
2004-07-08 22:35:36 +00:00
BOOTP opt_bootp.h
BOOTP_COMPAT opt_bootp.h
BOOTP_NFSROOT opt_bootp.h
BOOTP_NFSV3 opt_bootp.h
BOOTP_WIRED_TO opt_bootp.h
Bring dummynet+bridging in -current. Everything will be ready when LINT is updated.
1998-12-14 17:46:15 +00:00
BRIDGE opt_bdg.h
Tweak existing header and other build infrastructure to be able to build pf/pflog/pfsync as modules. Do not list them in NOTES or modules/Makefile (i.e. do not connect it to any (automatic) builds - yet). Approved by: bms(mentor)
2004-02-26 03:53:54 +00:00
DEV_PF opt_pf.h
DEV_PFLOG opt_pf.h
DEV_PFSYNC opt_pf.h
Allow if_ef driver to be compiled into kernel.
2000-01-23 03:35:11 +00:00
ETHER_II opt_ef.h
ETHER_8023 opt_ef.h
ETHER_8022 opt_ef.h
ETHER_SNAP opt_ef.h
Convert ipfw to use opt_ipfw.h
1996-06-12 19:34:33 +00:00
MROUTING opt_mrouting.h
Add support for "options PIM" in the kernel configuration file. Submitted by: Pavlin Radoslavov <pavlin@icir.org>
2003-08-07 18:19:28 +00:00
PIM opt_mrouting.h
Make INET a proper option. This will not make any of object files that LINT create change; there might be differences with INET disabled, but hardly anything compiled before without INET anyway. Now the 'obvious' things will give a proper error if compiled without inet - ipx_ip, ipfw, tcp_debug. The only thing that _should_ work (but can't be made to compile reasonably easily) is sppp :-( This commit move struct arpcom from <netinet/if_ether.h> to <net/if_arp.h>.
1998-01-08 23:42:31 +00:00
INET opt_inet.h
udp IPv6 support, IPv6/IPv4 tunneling support in kernel, packet divert at kernel for IPv6/IPv4 translater daemon This includes queue related patch submitted by jburkhol@home.com. Submitted by: queue related patch from jburkhol@home.com Reviewed by: freebsd-arch, cvs-committers Obtained from: KAME project
1999-12-07 17:39:16 +00:00
INET6 opt_inet6.h
IPSEC support in the kernel. pr_input() routines prototype is also changed to support IPSEC and IPV6 chained protocol headers. Reviewed by: freebsd-arch, cvs-committers Obtained from: KAME project
1999-12-22 19:13:38 +00:00
IPSEC opt_ipsec.h
IPSEC_ESP opt_ipsec.h
IPSEC_DEBUG opt_ipsec.h
Add a new config option IPSEC_FILTERGIF to control whether or not packets coming out of a GIF tunnel are re-processed by ipfw, et. al. By default they are not reprocessed. With the option they are. This reverts 1.214. Prior to that change packets were not re-processed. After they were which caused problems because packets do not have distinguishing characteristics (like a special network if) that allows them to be filtered specially. This is really a stopgap measure designed for immediate MFC so that 4.8 has consistent handling to what was in 4.7. PR: 48159 Reviewed by: Guido van Rooij <guido@gvr.org> MFC after: 1 day
2003-02-23 00:47:06 +00:00
IPSEC_FILTERGIF opt_ipsec.h
Tie new "Fast IPsec" code into the build. This involves the usual configuration stuff as well as conditional code in the IPv4 and IPv6 areas. Everything is conditional on FAST_IPSEC which is mutually exclusive with IPSEC (KAME IPsec implmentation). As noted previously, don't use FAST_IPSEC with INET6 at the moment. Reviewed by: KAME, rwatson Approved by: silence Supported by: Vernier Networks
2002-10-16 02:25:05 +00:00
FAST_IPSEC opt_ipsec.h
Make IPDIVERT a supported option. Alas, in_var.h depends on it, i hope i've found out all files that actually depend on this dependancy. IMHO, it's not very good practice to change the size of internal structs depending on kernel options.
1997-11-05 20:17:23 +00:00
IPDIVERT
Bring dummynet+bridging in -current. Everything will be ready when LINT is updated.
1998-12-14 17:46:15 +00:00
DUMMYNET opt_ipdn.h
Add kernel parts of revived ipfilter (3.3.3.)
1999-11-23 21:44:59 +00:00
IPFILTER opt_ipfilter.h
IPFILTER_LOG opt_ipfilter.h
Patches from Ruslan Ermilov to address problems compiling LINT
2005-04-28 16:33:15 +00:00
IPFILTER_LOOKUP opt_ipfilter.h
add IPFILTER_DEFAULT_BLOCK and put it in opt_ipfilter.h
2000-05-16 08:58:39 +00:00
IPFILTER_DEFAULT_BLOCK opt_ipfilter.h
Convert ipfw to use opt_ipfw.h
1996-06-12 19:34:33 +00:00
IPFIREWALL opt_ipfw.h
IPFIREWALL_VERBOSE opt_ipfw.h
Finished converting ipfw to use opt_ipfw.h.
1996-06-23 14:43:55 +00:00
IPFIREWALL_VERBOSE_LIMIT opt_ipfw.h
Allow a compile-time override of the ipfw deny rule. For a 'firewall' you don't want this (and the documentation explains why), but if you use ipfw as an as-needed casual filter as needed which normally runs as 'allow all' then having the kernel and /sbin/ipfw get out of sync is a *MAJOR* pain in the behind. PR: 4141 Submitted by: Heikki Suonsivu <hsu@mail.clinet.fi>
1997-09-10 03:07:14 +00:00
IPFIREWALL_DEFAULT_TO_ACCEPT opt_ipfw.h
Convert ipfw to use PFIL_HOOKS. This is change is transparent to userland and preserves the ipfw ABI. The ipfw core packet inspection and filtering functions have not been changed, only how ipfw is invoked is different. However there are many changes how ipfw is and its add-on's are handled: In general ipfw is now called through the PFIL_HOOKS and most associated magic, that was in ip_input() or ip_output() previously, is now done in ipfw_check_[in|out]() in the ipfw PFIL handler. IPDIVERT is entirely handled within the ipfw PFIL handlers. A packet to be diverted is checked if it is fragmented, if yes, ip_reass() gets in for reassembly. If not, or all fragments arrived and the packet is complete, divert_packet is called directly. For 'tee' no reassembly attempt is made and a copy of the packet is sent to the divert socket unmodified. The original packet continues its way through ip_input/output(). ipfw 'forward' is done via m_tag's. The ipfw PFIL handlers tag the packet with the new destination sockaddr_in. A check if the new destination is a local IP address is made and the m_flags are set appropriately. ip_input() and ip_output() have some more work to do here. For ip_input() the m_flags are checked and a packet for us is directly sent to the 'ours' section for further processing. Destination changes on the input path are only tagged and the 'srcrt' flag to ip_forward() is set to disable destination checks and ICMP replies at this stage. The tag is going to be handled on output. ip_output() again checks for m_flags and the 'ours' tag. If found, the packet will be dropped back to the IP netisr where it is going to be picked up by ip_input() again and the directly sent to the 'ours' section. When only the destination changes, the route's 'dst' is overwritten with the new destination from the forward m_tag. Then it jumps back at the route lookup again and skips the firewall check because it has been marked with M_SKIP_FIREWALL. ipfw 'forward' has to be compiled into the kernel with 'option IPFIREWALL_FORWARD' to enable it. DUMMYNET is entirely handled within the ipfw PFIL handlers. A packet for a dummynet pipe or queue is directly sent to dummynet_io(). Dummynet will then inject it back into ip_input/ip_output() after it has served its time. Dummynet packets are tagged and will continue from the next rule when they hit the ipfw PFIL handlers again after re-injection. BRIDGING and IPFW_ETHER are not changed yet and use ipfw_chk() directly as they did before. Later this will be changed to dedicated ETHER PFIL_HOOKS. More detailed changes to the code: conf/files Add netinet/ip_fw_pfil.c. conf/options Add IPFIREWALL_FORWARD option. modules/ipfw/Makefile Add ip_fw_pfil.c. net/bridge.c Disable PFIL_HOOKS if ipfw for bridging is active. Bridging ipfw is still directly invoked to handle layer2 headers and packets would get a double ipfw when run through PFIL_HOOKS as well. netinet/ip_divert.c Removed divert_clone() function. It is no longer used. netinet/ip_dummynet.[ch] Neither the route 'ro' nor the destination 'dst' need to be stored while in dummynet transit. Structure members and associated macros are removed. netinet/ip_fastfwd.c Removed all direct ipfw handling code and replace it with the new 'ipfw forward' handling code. netinet/ip_fw.h Removed 'ro' and 'dst' from struct ip_fw_args. netinet/ip_fw2.c (Re)moved some global variables and the module handling. netinet/ip_fw_pfil.c New file containing the ipfw PFIL handlers and module initialization. netinet/ip_input.c Removed all direct ipfw handling code and replace it with the new 'ipfw forward' handling code. ip_forward() does not longer require the 'next_hop' struct sockaddr_in argument. Disable early checks if 'srcrt' is set. netinet/ip_output.c Removed all direct ipfw handling code and replace it with the new 'ipfw forward' handling code. netinet/ip_var.h Add ip_reass() as general function. (Used from ipfw PFIL handlers for IPDIVERT.) netinet/raw_ip.c Directly check if ipfw and dummynet control pointers are active. netinet/tcp_input.c Rework the 'ipfw forward' to local code to work with the new way of forward tags. netinet/tcp_sack.c Remove include 'opt_ipfw.h' which is not needed here. sys/mbuf.h Remove m_claim_next() macro which was exclusively for ipfw 'forward' and is no longer needed. Approved by: re (scottl)
2004-08-17 22:05:54 +00:00
IPFIREWALL_FORWARD opt_ipfw.h
o s/opt_ifpw.h/opt_ipfw.h/ in the previous commit. Submitted by: YONETANI Tomokazu
2005-03-06 11:22:49 +00:00
IPFIREWALL_FORWARD_EXTENDED opt_ipfw.h
Add ip6fw. Yes it is almost code freeze, but as the result of many thought, now I think this should be added before 4.0... make world check, kernel build check is done. Reviewed by: green Obtained from: KAME project
2000-01-29 13:54:44 +00:00
IPV6FIREWALL opt_ip6fw.h
IPV6FIREWALL_VERBOSE opt_ip6fw.h
IPV6FIREWALL_VERBOSE_LIMIT opt_ip6fw.h
IPV6FIREWALL_DEFAULT_TO_ACCEPT opt_ip6fw.h
Add support for stealth forwarding (forwarding packets without touching their ttl). This can be used - in combination with the proper ipfw incantations - to make a firewall or router invisible to traceroute and other exploration tools. This behaviour is controlled by a sysctl variable (net.inet.ip.stealth) and hidden behind a kernel option (IPSTEALTH). Reviewed by: eivind, bde
1999-02-22 18:19:57 +00:00
IPSTEALTH
Options that go into homonymous headers shouldn't specify the header name. Submitted by: Hiten Pandya <hiten@unixdaemons.com>
2003-04-12 09:40:37 +00:00
IPX
Throw options IPX, IPXIP and IPTUNNEL into opt_ipx.h. The #ifdef IPXIP in netipx/ipx_if.h is OK (used from ipx_usrreq.c and ifconfig.c only). I also fixed a typo IPXTUNNEL -> IPTUNNEL (and #ifdef'ed out the code inside, as it never could have compiled - doh.)
1997-12-15 20:31:25 +00:00
IPXIP opt_ipx.h
Add a facility for devices, specifically network interfaces, that require large to huge amounts of small or medium sized receive buffers. The problem with these situations is that they eat up the available DMA address space very quickly when using mbufs or even mbuf clusters. Additionally this facility provides a direct mapping between 32-bit integers and these buffers. This is needed for devices originally designed for 32-bit systems. Ususally the virtual address of the buffer is used as a handle to find the buffer as soon as it is returned by the card. This does not work for 64-bit machines and hence this mapping is needed.
2003-07-15 08:59:38 +00:00
LIBMBPOOL
Introduce API for sequential reads/writes (build/dissect) of mbuf chains. Reviewed by: Ian Dowse <iedowse@maths.tcd.ie>, Bosko Milekic <bmilekic@technokratis.com>, Julian Elischer <julian@elischer.org> and arch@/net@ Obtained from: smbfs
2001-02-24 15:44:30 +00:00
LIBMCHAIN
libalias is now buildable as kernel module
2005-05-05 22:43:04 +00:00
LIBALIAS
Fixed some insertion sort errors.
2004-02-25 09:35:35 +00:00
MBUF_STRESS_TEST opt_mbuf_stress_test.h
Options that go into homonymous headers shouldn't specify the header name. Submitted by: Hiten Pandya <hiten@unixdaemons.com>
2003-04-12 09:40:37 +00:00
NCP
NETATALK -> opt_atalk.h
1998-01-09 00:51:57 +00:00
NETATALK opt_atalk.h
Change the default disposition of debug.mpsafenet from 0 to 1, which will cause the network stack to operate without the Giant lock by default. This change has the potential to improve performance by increasing parallelism and decreasing latency in network processing. Due to the potential exposure of existing or new bugs, the following compatibility functionality is maintained: - It is still possible to disable Giant-free operation by setting debug.mpsafenet to 0 in loader.conf. - Add "options NET_WITH_GIANT", which will restore the default value of debug.mpsafenet to 0, and is intended for use on systems compiled with known unsafe components, or where a more conservative configuration is desired. - Add a new declaration, NET_NEEDS_GIANT("componentname"), which permits kernel components to declare dependence on Giant over the network stack. If the declaration is made by a preloaded module or a compiled in component, the disposition of debug.mpsafenet will be set to 0 and a warning concerning performance degraded operation printed to the console. If it is declared by a loadable kernel module after boot, a warning is displayed but the disposition cannot be changed. This is implemented by defining a new SYSINIT() value, SI_SUB_SETTINGS, which is intended for the processing of configuration choices after tunables are read in and the console is available to generate errors, but before much else gets going. This compatibility behavior will go away when we've finished the last of the locking work and are confident that operation is correct.
2004-08-28 15:11:13 +00:00
NET_WITH_GIANT opt_net.h
Use two NetBSD-style options (PPP_DEFLATE and PPP_BSDCOMP) to control whether or not to compile the two ppp compression methods.
1997-08-19 17:05:26 +00:00
PPP_BSDCOMP opt_ppp.h
PPP_DEFLATE opt_ppp.h
Convert PPP_FILTER to an option
1997-10-18 01:15:32 +00:00
PPP_FILTER opt_ppp.h
Re-order list.
1999-08-10 09:42:32 +00:00
SLIP_IFF_OPTS opt_slip.h
Make TCPDEBUG a new-style option.
1997-09-16 18:36:06 +00:00
TCPDEBUG
Initial import of RFC 2385 (TCP-MD5) digest support. This is the first of two commits; bringing in the kernel support first. This can be enabled by compiling a kernel with options TCP_SIGNATURE and FAST_IPSEC. For the uninitiated, this is a TCP option which provides for a means of authenticating TCP sessions which came into being before IPSEC. It is still relevant today, however, as it is used by many commercial router vendors, particularly with BGP, and as such has become a requirement for interconnect at many major Internet points of presence. Several parts of the TCP and IP headers, including the segment payload, are digested with MD5, including a shared secret. The PF_KEY interface is used to manage the secrets using security associations in the SADB. There is a limitation here in that as there is no way to map a TCP flow per-port back to an SPI without polluting tcpcb or using the SPD; the code to do the latter is unstable at this time. Therefore this code only supports per-host keying granularity. Whilst FAST_IPSEC is mutually exclusive with KAME IPSEC (and thus IPv6), TCP_SIGNATURE applies only to IPv4. For the vast majority of prospective users of this feature, this will not pose any problem. This implementation is output-only; that is, the option is honoured when responding to a host initiating a TCP session, but no effort is made [yet] to authenticate inbound traffic. This is, however, sufficient to interwork with Cisco equipment. Tested with a Cisco 2501 running IOS 12.0(27), and Quagga 0.96.4 with local patches. Patches for tcpdump to validate TCP-MD5 sessions are also available from me upon request. Sponsored by: sentex.net
2004-02-11 04:26:04 +00:00
TCP_SIGNATURE opt_inet.h
Add support for TCP Selective Acknowledgements. The work for this originated on RELENG_4 and was ported to -CURRENT. The scoreboarding code was obtained from OpenBSD, and many of the remaining changes were inspired by OpenBSD, but not taken directly from there. You can enable/disable sack using net.inet.tcp.do_sack. You can also limit the number of sack holes that all senders can have in the scoreboard with net.inet.tcp.sackhole_limit. Reviewed by: gnn Obtained from: Yahoo! (Mohan Srinivasan, Jayanth Vijayaraghavan)
2004-06-23 21:04:37 +00:00
TCP_SACK_DEBUG opt_tcp_sack.h
Add the net.inet.tcp.restrict_rst and net.inet.tcp.drop_synfin sysctl variables, conditional on the TCP_RESTRICT_RST and TCP_DROP_SYNFIN kernel options, respectively. See the comments in LINT for details.
1999-09-12 17:22:08 +00:00
TCP_DROP_SYNFIN opt_tcp_input.h
Temporary hack for the benefit of the X-Bone project (http://www.isi.edu/xbone). I expect this to go away in due course. Submitted by: Lars Eggert <larse@ISI.EDU>
2000-07-20 00:35:37 +00:00
XBONEHACK
Move DPT related options out of i386 specific files so DPT devices can be used on other PCI (alpha?) machines. Suggested by: several people
1998-01-26 18:31:18 +00:00
Whistle's Netgraph link-layer (sometimes more) networking infrastructure. Been in production for 3 years now. Gives Instant Frame relay to if_sr and if_ar drivers, and PPPOE support soon. See: ftp://ftp.whistle.com/pub/archie/netgraph/index.html for on-line manual pages. Reviewed by: Doug Rabson (dfr@freebsd.org) Obtained from: Whistle CVS tree
1999-10-21 09:06:11 +00:00
# Netgraph(4). Use option NETGRAPH to enable the base netgraph code.
# Each netgraph node type can be either be compiled into the kernel
# or loaded dynamically. To get the former, include the corresponding
New netgraph node type for Ethernet bridging. No ipfw support yet.
2000-09-01 01:37:13 +00:00
# option below. Each type has its own man page, e.g. ng_async(4).
Whistle's Netgraph link-layer (sometimes more) networking infrastructure. Been in production for 3 years now. Gives Instant Frame relay to if_sr and if_ar drivers, and PPPOE support soon. See: ftp://ftp.whistle.com/pub/archie/netgraph/index.html for on-line manual pages. Reviewed by: Doug Rabson (dfr@freebsd.org) Obtained from: Whistle CVS tree
1999-10-21 09:06:11 +00:00
NETGRAPH
Make NETGRAPH_DEBUG a kernel option, so that it can't be turned off without hacking source. In collaboration with: ru, julian
2005-05-16 08:25:55 +00:00
NETGRAPH_DEBUG opt_netgraph.h
Whistle's Netgraph link-layer (sometimes more) networking infrastructure. Been in production for 3 years now. Gives Instant Frame relay to if_sr and if_ar drivers, and PPPOE support soon. See: ftp://ftp.whistle.com/pub/archie/netgraph/index.html for on-line manual pages. Reviewed by: Doug Rabson (dfr@freebsd.org) Obtained from: Whistle CVS tree
1999-10-21 09:06:11 +00:00
NETGRAPH_ASYNC opt_netgraph.h
Add a netgraph node to handle ATM LLC encapsulation. This currently handles ethernet (tested) and FDDI (not tested). The main use for this is on ADSL (or other ATM) connections where bridged ethernet is used, PPPoE being a prime example. There is no manual page as yet, I will write one shortly. Reviewed by: harti
2004-03-08 10:54:35 +00:00
NETGRAPH_ATMLLC opt_netgraph.h
Address few style issues pointed out by bde Reviewed by: bde, ru
2004-04-27 16:38:15 +00:00
NETGRAPH_ATM_ATMPIF opt_netgraph.h
NETGRAPH_BLUETOOTH opt_netgraph.h
NETGRAPH_BLUETOOTH_BT3C opt_netgraph.h
NETGRAPH_BLUETOOTH_H4 opt_netgraph.h
NETGRAPH_BLUETOOTH_HCI opt_netgraph.h
NETGRAPH_BLUETOOTH_L2CAP opt_netgraph.h
NETGRAPH_BLUETOOTH_SOCKET opt_netgraph.h
NETGRAPH_BLUETOOTH_UBT opt_netgraph.h
NETGRAPH_BLUETOOTH_UBTBCMFW opt_netgraph.h
New netgraph node type, ng_bpf(8). This node type allows you to apply bpf(4) filters to data travelling through a netgraph network.
1999-12-03 21:21:49 +00:00
NETGRAPH_BPF opt_netgraph.h
New netgraph node type for Ethernet bridging. No ipfw support yet.
2000-09-01 01:37:13 +00:00
NETGRAPH_BRIDGE opt_netgraph.h
Whistle's Netgraph link-layer (sometimes more) networking infrastructure. Been in production for 3 years now. Gives Instant Frame relay to if_sr and if_ar drivers, and PPPOE support soon. See: ftp://ftp.whistle.com/pub/archie/netgraph/index.html for on-line manual pages. Reviewed by: Doug Rabson (dfr@freebsd.org) Obtained from: Whistle CVS tree
1999-10-21 09:06:11 +00:00
NETGRAPH_CISCO opt_netgraph.h
Add ng_device(4) to LINT. Reviewed by: marks Approved by: julian (mentor)
2004-07-20 12:42:54 +00:00
NETGRAPH_DEVICE opt_netgraph.h
Whistle's Netgraph link-layer (sometimes more) networking infrastructure. Been in production for 3 years now. Gives Instant Frame relay to if_sr and if_ar drivers, and PPPOE support soon. See: ftp://ftp.whistle.com/pub/archie/netgraph/index.html for on-line manual pages. Reviewed by: Doug Rabson (dfr@freebsd.org) Obtained from: Whistle CVS tree
1999-10-21 09:06:11 +00:00
NETGRAPH_ECHO opt_netgraph.h
Add options NETGRAPH_EIFACE, which causes ng_eiface.c to be built into the kernel, similar to NETGRAPH_IFACE for ng_iface.c. It appears to have been omitted when added to the kernel.
2004-06-27 02:25:38 +00:00
NETGRAPH_EIFACE opt_netgraph.h
Make the ng_ether(4) node type dynamically loadable like the rest. This means 'options NETGRAPH' is no longer necessary in order to get netgraph-enabled Ethernet interfaces. This supports loading/unloading the ng_ether.ko and attaching/detaching the Ethernet interface in any order. Add two new hooks 'upper' and 'lower' to allow access to the protocol demux engine and the raw device, respectively. This enables bridging to be defined as a netgraph node, if so desired. Reviewed by: freebsd-net@freebsd.org
2000-06-26 23:34:54 +00:00
NETGRAPH_ETHER opt_netgraph.h
Add options NETGRAPH_FEC to hook up ng_fec.c to the LINT build.
2004-06-27 02:36:33 +00:00
NETGRAPH_FEC opt_netgraph.h
Whistle's Netgraph link-layer (sometimes more) networking infrastructure. Been in production for 3 years now. Gives Instant Frame relay to if_sr and if_ar drivers, and PPPOE support soon. See: ftp://ftp.whistle.com/pub/archie/netgraph/index.html for on-line manual pages. Reviewed by: Doug Rabson (dfr@freebsd.org) Obtained from: Whistle CVS tree
1999-10-21 09:06:11 +00:00
NETGRAPH_FRAME_RELAY opt_netgraph.h
/home/brooks/ng_gif.message
2001-09-26 23:50:17 +00:00
NETGRAPH_GIF opt_netgraph.h
NETGRAPH_GIF_DEMUX opt_netgraph.h
Whistle's Netgraph link-layer (sometimes more) networking infrastructure. Been in production for 3 years now. Gives Instant Frame relay to if_sr and if_ar drivers, and PPPOE support soon. See: ftp://ftp.whistle.com/pub/archie/netgraph/index.html for on-line manual pages. Reviewed by: Doug Rabson (dfr@freebsd.org) Obtained from: Whistle CVS tree
1999-10-21 09:06:11 +00:00
NETGRAPH_HOLE opt_netgraph.h
NETGRAPH_IFACE opt_netgraph.h
Add ng_ip_input. A new netgraph node for queuing IP packets into the main IP input processing code.
2001-09-27 21:54:27 +00:00
NETGRAPH_IP_INPUT opt_netgraph.h
Hook up ng_ipfw to kernel build.
2005-02-05 12:15:56 +00:00
NETGRAPH_IPFW opt_netgraph.h
Add option NETGRAPH_KSOCKET.
1999-11-16 23:49:07 +00:00
NETGRAPH_KSOCKET opt_netgraph.h
New L2TP netgraph node type. Obtained from: Packet Design
2002-08-20 21:59:50 +00:00
NETGRAPH_L2TP opt_netgraph.h
Improve consistency, ordering, style of options: - Remove extra blank lines - Sort options - Remove comments that belong in NOTES Submitted by: bde (older revision)
2003-04-15 19:43:52 +00:00
NETGRAPH_LMI opt_netgraph.h
Add new options NETGRAPH_MPPC_COMPRESSION and NETGRAPH_MPPC_ENCRYPTION. (Note: NETGRAPH_MPPC_COMPRESSION is disabled until we find a non-proprietary implementation of the MPPC compression algorithm.)
2000-04-09 21:15:23 +00:00
# MPPC compression requires proprietary files (not included)
NETGRAPH_MPPC_COMPRESSION opt_netgraph.h
NETGRAPH_MPPC_ENCRYPTION opt_netgraph.h
ng_nat - a netgraph(4) node, which does NAT
2005-05-05 23:41:21 +00:00
NETGRAPH_NAT opt_netgraph.h
Attach ng_netflow to kernel build. Approved by: julian (mentor)
2004-09-16 20:35:28 +00:00
NETGRAPH_NETFLOW opt_netgraph.h
Add kernel option NETGRAPH_ONE2MANY.
2000-11-16 16:59:26 +00:00
NETGRAPH_ONE2MANY opt_netgraph.h
Add options NETGRAPH_PPP and NETGRAPH_PPPOE.
1999-11-02 22:36:09 +00:00
NETGRAPH_PPP opt_netgraph.h
NETGRAPH_PPPOE opt_netgraph.h
New netgraph node type 'pptpgre': this performs GRE encapsulation for the PPTP protocol as specified in RFC 2637.
1999-12-08 18:55:39 +00:00
NETGRAPH_PPTPGRE opt_netgraph.h
Whistle's Netgraph link-layer (sometimes more) networking infrastructure. Been in production for 3 years now. Gives Instant Frame relay to if_sr and if_ar drivers, and PPPOE support soon. See: ftp://ftp.whistle.com/pub/archie/netgraph/index.html for on-line manual pages. Reviewed by: Doug Rabson (dfr@freebsd.org) Obtained from: Whistle CVS tree
1999-10-21 09:06:11 +00:00
NETGRAPH_RFC1490 opt_netgraph.h
NETGRAPH_SOCKET opt_netgraph.h
Allow ng_split to be compiled in staticly. MFC after: 7 weeks
2001-07-25 00:15:02 +00:00
NETGRAPH_SPLIT opt_netgraph.h
Connect ng_sppp to the build process.
2004-04-24 22:03:02 +00:00
NETGRAPH_SPPP opt_netgraph.h
Attach ng_tcpmss to the build.
2005-06-10 08:05:13 +00:00
NETGRAPH_TCPMSS opt_netgraph.h
Whistle's Netgraph link-layer (sometimes more) networking infrastructure. Been in production for 3 years now. Gives Instant Frame relay to if_sr and if_ar drivers, and PPPOE support soon. See: ftp://ftp.whistle.com/pub/archie/netgraph/index.html for on-line manual pages. Reviewed by: Doug Rabson (dfr@freebsd.org) Obtained from: Whistle CVS tree
1999-10-21 09:06:11 +00:00
NETGRAPH_TEE opt_netgraph.h
NETGRAPH_TTY opt_netgraph.h
NETGRAPH_UI opt_netgraph.h
Add an option for the van Jacobson Compression Netgraph node.
1999-10-25 22:07:30 +00:00
NETGRAPH_VJC opt_netgraph.h
Make sure Bluetooth stuff can be statically compiled into kernel Submitted by: ps Reviewed by: imp (mentor), ru
2004-04-23 19:48:43 +00:00
Make the netgraph ATM node compilable into the kernel.
2003-06-25 13:21:04 +00:00
# NgATM options
NGATM_ATM opt_netgraph.h
Allow building the NgATM SAAL layer directly into the kernel.
2003-10-27 11:19:08 +00:00
NGATM_ATMBASE opt_netgraph.h
NGATM_SSCOP opt_netgraph.h
NGATM_SSCFU opt_netgraph.h
Allow the ng_uni node (NgATM signalling layer) to be built into the kernel via options NGATM_UNI.
2003-11-07 09:18:53 +00:00
NGATM_UNI opt_netgraph.h
Allow the ATM call control module to be built into the kernel.
2004-08-12 15:01:59 +00:00
NGATM_CCATM opt_netgraph.h
Make the netgraph ATM node compilable into the kernel.
2003-06-25 13:21:04 +00:00
Hook the DRM up to the build and add it to NOTES. Approved by: des
2002-04-28 04:58:40 +00:00
# DRM options
DRM_DEBUG opt_drm.h
At long last, commit the zero copy sockets code. MAKEDEV: Add MAKEDEV glue for the ti(4) device nodes. ti.4: Update the ti(4) man page to include information on the TI_JUMBO_HDRSPLIT and TI_PRIVATE_JUMBOS kernel options, and also include information about the new character device interface and the associated ioctls. man9/Makefile: Add jumbo.9 and zero_copy.9 man pages and associated links. jumbo.9: New man page describing the jumbo buffer allocator interface and operation. zero_copy.9: New man page describing the general characteristics of the zero copy send and receive code, and what an application author should do to take advantage of the zero copy functionality. NOTES: Add entries for ZERO_COPY_SOCKETS, TI_PRIVATE_JUMBOS, TI_JUMBO_HDRSPLIT, MSIZE, and MCLSHIFT. conf/files: Add uipc_jumbo.c and uipc_cow.c. conf/options: Add the 5 options mentioned above. kern_subr.c: Receive side zero copy implementation. This takes "disposable" pages attached to an mbuf, gives them to a user process, and then recycles the user's page. This is only active when ZERO_COPY_SOCKETS is turned on and the kern.ipc.zero_copy.receive sysctl variable is set to 1. uipc_cow.c: Send side zero copy functions. Takes a page written by the user and maps it copy on write and assigns it kernel virtual address space. Removes copy on write mapping once the buffer has been freed by the network stack. uipc_jumbo.c: Jumbo disposable page allocator code. This allocates (optionally) disposable pages for network drivers that want to give the user the option of doing zero copy receive. uipc_socket.c: Add kern.ipc.zero_copy.{send,receive} sysctls that are enabled if ZERO_COPY_SOCKETS is turned on. Add zero copy send support to sosend() -- pages get mapped into the kernel instead of getting copied if they meet size and alignment restrictions. uipc_syscalls.c:Un-staticize some of the sf* functions so that they can be used elsewhere. (uipc_cow.c) if_media.c: In the SIOCGIFMEDIA ioctl in ifmedia_ioctl(), avoid calling malloc() with M_WAITOK. Return an error if the M_NOWAIT malloc fails. The ti(4) driver and the wi(4) driver, at least, call this with a mutex held. This causes witness warnings for 'ifconfig -a' with a wi(4) or ti(4) board in the system. (I've only verified for ti(4)). ip_output.c: Fragment large datagrams so that each segment contains a multiple of PAGE_SIZE amount of data plus headers. This allows the receiver to potentially do page flipping on receives. if_ti.c: Add zero copy receive support to the ti(4) driver. If TI_PRIVATE_JUMBOS is not defined, it now uses the jumbo(9) buffer allocator for jumbo receive buffers. Add a new character device interface for the ti(4) driver for the new debugging interface. This allows (a patched version of) gdb to talk to the Tigon board and debug the firmware. There are also a few additional debugging ioctls available through this interface. Add header splitting support to the ti(4) driver. Tweak some of the default interrupt coalescing parameters to more useful defaults. Add hooks for supporting transmit flow control, but leave it turned off with a comment describing why it is turned off. if_tireg.h: Change the firmware rev to 12.4.11, since we're really at 12.4.11 plus fixes from 12.4.13. Add defines needed for debugging. Remove the ti_stats structure, it is now defined in sys/tiio.h. ti_fw.h: 12.4.11 firmware. ti_fw2.h: 12.4.11 firmware, plus selected fixes from 12.4.13, and my header splitting patches. Revision 12.4.13 doesn't handle 10/100 negotiation properly. (This firmware is the same as what was in the tree previously, with the addition of header splitting support.) sys/jumbo.h: Jumbo buffer allocator interface. sys/mbuf.h: Add a new external mbuf type, EXT_DISPOSABLE, to indicate that the payload buffer can be thrown away / flipped to a userland process. socketvar.h: Add prototype for socow_setup. tiio.h: ioctl interface to the character portion of the ti(4) driver, plus associated structure/type definitions. uio.h: Change prototype for uiomoveco() so that we'll know whether the source page is disposable. ufs_readwrite.c:Update for new prototype of uiomoveco(). vm_fault.c: In vm_fault(), check to see whether we need to do a page based copy on write fault. vm_object.c: Add a new function, vm_object_allocate_wait(). This does the same thing that vm_object allocate does, except that it gives the caller the opportunity to specify whether it should wait on the uma_zalloc() of the object structre. This allows vm objects to be allocated while holding a mutex. (Without generating WITNESS warnings.) vm_object_allocate() is implemented as a call to vm_object_allocate_wait() with the malloc flag set to M_WAITOK. vm_object.h: Add prototype for vm_object_allocate_wait(). vm_page.c: Add page-based copy on write setup, clear and fault routines. vm_page.h: Add page based COW function prototypes and variable in the vm_page structure. Many thanks to Drew Gallatin, who wrote the zero copy send and receive code, and to all the other folks who have tested and reviewed this code over the years.
2002-06-26 03:37:47 +00:00
ZERO_COPY_SOCKETS opt_zero.h
TI_PRIVATE_JUMBOS opt_ti.h
TI_JUMBO_HDRSPLIT opt_ti.h
(this is an extract from src/share/examples/atm/README) =================================== HARP | Host ATM Research Platform =================================== HARP 3 What is this stuff? ------------------- The Advanced Networking Group (ANG) at the Minnesota Supercomputer Center, Inc. (MSCI), as part of its work on the MAGIC Gigabit Testbed, developed the Host ATM Research Platform (HARP) software, which allows IP hosts to communicate over ATM networks using standard protocols. It is intended to be a high-quality platform for IP/ATM research. HARP provides a way for IP hosts to connect to ATM networks. It supports standard methods of communication using IP over ATM. A host's standard IP software sends and receives datagrams via a HARP ATM interface. HARP provides functionality similar to (and typically replaces) vendor-provided ATM device driver software. HARP includes full source code, making it possible for researchers to experiment with different approaches to running IP over ATM. HARP is self-contained; it requires no other licenses or commercial software packages. HARP implements support for the IETF Classical IP model for using IP over ATM networks, including: o IETF ATMARP address resolution client o IETF ATMARP address resolution server o IETF SCSP/ATMARP server o UNI 3.1 and 3.0 signalling protocols o Fore Systems's SPANS signalling protocol What's supported ---------------- The following are supported by HARP 3: o ATM Host Interfaces - FORE Systems, Inc. SBA-200 and SBA-200E ATM SBus Adapters - FORE Systems, Inc. PCA-200E ATM PCI Adapters - Efficient Networks, Inc. ENI-155p ATM PCI Adapters o ATM Signalling Protocols - The ATM Forum UNI 3.1 signalling protocol - The ATM Forum UNI 3.0 signalling protocol - The ATM Forum ILMI address registration - FORE Systems's proprietary SPANS signalling protocol - Permanent Virtual Channels (PVCs) o IETF "Classical IP and ARP over ATM" model - RFC 1483, "Multiprotocol Encapsulation over ATM Adaptation Layer 5" - RFC 1577, "Classical IP and ARP over ATM" - RFC 1626, "Default IP MTU for use over ATM AAL5" - RFC 1755, "ATM Signaling Support for IP over ATM" - RFC 2225, "Classical IP and ARP over ATM" - RFC 2334, "Server Cache Synchronization Protocol (SCSP)" - Internet Draft draft-ietf-ion-scsp-atmarp-00.txt, "A Distributed ATMARP Service Using SCSP" o ATM Sockets interface - The file atm-sockets.txt contains further information What's not supported -------------------- The following major features of the above list are not currently supported: o UNI point-to-multipoint support o Driver support for Traffic Control/Quality of Service o SPANS multicast and MPP support o SPANS signalling using Efficient adapters This software was developed under the sponsorship of the Defense Advanced Research Projects Agency (DARPA). Reviewed (lightly) by: phk Submitted by: Network Computing Services, Inc.
1998-09-15 11:44:44 +00:00
# ATM (HARP version)
ATM_CORE opt_atm.h
ATM_IP opt_atm.h
ATM_SIGPVC opt_atm.h
ATM_SPANS opt_atm.h
ATM_UNI opt_atm.h
Make POWERFAIL_NMI, PPS_SYNC and NATM new style options. This also fixes a couple of defunct options; submitted by bde.
1998-01-31 05:00:21 +00:00
# XXX Conflict: # of devices vs network protocol (Native ATM).
# This makes "atm.h" unusable.
Options that go into homonymous headers shouldn't specify the header name. Submitted by: Hiten Pandya <hiten@unixdaemons.com>
2003-04-12 09:40:37 +00:00
NATM
Make POWERFAIL_NMI, PPS_SYNC and NATM new style options. This also fixes a couple of defunct options; submitted by bde.
1998-01-31 05:00:21 +00:00
Move DPT related options out of i386 specific files so DPT devices can be used on other PCI (alpha?) machines. Suggested by: several people
1998-01-26 18:31:18 +00:00
# DPT driver debug flags
Update DPT driver from 1.4.3 to 1.4.5 Submitted by: Simon Shapiro <shimon@simon-shapiro.org>
1998-08-05 00:54:38 +00:00
DPT_MEASURE_PERFORMANCE opt_dpt.h
DPT_HANDLE_TIMEOUTS opt_dpt.h
DPT_TIMEOUT_FACTOR opt_dpt.h
Move DPT related options out of i386 specific files so DPT devices can be used on other PCI (alpha?) machines. Suggested by: several people
1998-01-26 18:31:18 +00:00
DPT_LOST_IRQ opt_dpt.h
Update DPT driver from 1.4.3 to 1.4.5 Submitted by: Simon Shapiro <shimon@simon-shapiro.org>
1998-08-05 00:54:38 +00:00
DPT_RESET_HBA opt_dpt.h
Make the debug options new-style. This also zaps a DPT option from lint; it wasn't referenced from anywhere.
1998-01-31 07:23:16 +00:00
# Misc debug flags. Most of these should probably be replaced with
# 'DEBUG', and then let people recompile just the interesting modules
Rename nlpt to lpt. Remove from ppi.c the old depreciated module stuff. Print info when if_plip can't use interrupts.
1999-02-14 12:00:00 +00:00
# with 'make CC="cc -DDEBUG"'.
Make the debug options new-style. This also zaps a DPT option from lint; it wasn't referenced from anywhere.
1998-01-31 07:23:16 +00:00
CLUSTERDEBUG opt_debug_cluster.h
Forgotten options needed to build last ppbus commit. Submitted by: "D. Rock" <rock@wurzelausix.CS.Uni-SB.DE>
1999-01-10 17:41:33 +00:00
DEBUG_1284 opt_ppb_1284.h
VP0_DEBUG opt_vpo.h
Rename nlpt to lpt. Remove from ppi.c the old depreciated module stuff. Print info when if_plip can't use interrupts.
1999-02-14 12:00:00 +00:00
LPT_DEBUG opt_lpt.h
Replace DEBUG by PLIP_DEBUG option
1999-01-23 17:07:49 +00:00
PLIP_DEBUG opt_plip.h
Make the debug options new-style. This also zaps a DPT option from lint; it wasn't referenced from anywhere.
1998-01-31 07:23:16 +00:00
LOCKF_DEBUG opt_debug_lockf.h
NETATALKDEBUG opt_atalk.h
SI_DEBUG opt_debug_si.h
Add glue for new sx driver.
2004-04-11 20:01:18 +00:00
SX_DEBUG opt_debug_sx.h
Make the debug options new-style. This also zaps a DPT option from lint; it wasn't referenced from anywhere.
1998-01-31 07:23:16 +00:00
Options cleanup. * GC unused options * Move options that exist on all architectures to conf/options * Add missing options to LINT * Sort undocumented options list in LINT Reviewed by: green
1999-11-06 23:41:10 +00:00
# Fb options
FB_DEBUG opt_fb.h
FB_INSTALL_CDEV opt_fb.h
Terminate commit for the Intel PIIX4 SMBus support. Already committed files are sys/pci/intpm* Submitted by: Takanori Watanabe <takawata@shidahara1.planet.sci.kobe-u.ac.jp>
1999-01-25 19:34:27 +00:00
# ppbus related options
PERIPH_1284 opt_ppb_1284.h
DONTPROBE_1284 opt_ppb_1284.h
# smbus related options
ENABLE_ALART opt_intpm.h
Make the debug options new-style. This also zaps a DPT option from lint; it wasn't referenced from anywhere.
1998-01-31 07:23:16 +00:00
Throw DEBUG and DIAGNOSTIC in opt_global.h
1998-02-06 12:41:39 +00:00
# These cause changes all over the kernel
Options cleanup. * GC unused options * Move options that exist on all architectures to conf/options * Add missing options to LINT * Sort undocumented options list in LINT Reviewed by: green
1999-11-06 23:41:10 +00:00
BLKDEV_IOSIZE opt_global.h
Fix typo for BURN_BRIDGES' file, it should be opt_global.h
2003-07-11 17:04:37 +00:00
BURN_BRIDGES opt_global.h
Throw DEBUG and DIAGNOSTIC in opt_global.h
1998-02-06 12:41:39 +00:00
DEBUG opt_global.h
Add 'options DEBUG_LOCKS', which stores extra information in struct lock, and add some macros and function parameters to make sure that the information get to the point where it can be put in the lock structure. While I'm here, add DEBUG_VFS_LOCKS to LINT.
1999-01-20 14:49:12 +00:00
DEBUG_LOCKS opt_global.h
Split DIAGNOSTIC -> DIAGNOSTIC, INVARIANTS, and INVARIANT_SUPPORT as discussed on -hackers. Introduce 'KASSERT(assertion, ("panic message", args))' for simple check + panic. Reviewed by: msmith
1999-01-08 17:31:30 +00:00
DEBUG_VFS_LOCKS opt_global.h
Throw DEBUG and DIAGNOSTIC in opt_global.h
1998-02-06 12:41:39 +00:00
DIAGNOSTIC opt_global.h
Add back in INVARIANT_SUPPORT and expand the comments in NOTES about it to include the reasoning Eivind justifiably thwapped me over the head with.
2001-02-24 19:03:18 +00:00
INVARIANT_SUPPORT opt_global.h
Split DIAGNOSTIC -> DIAGNOSTIC, INVARIANTS, and INVARIANT_SUPPORT as discussed on -hackers. Introduce 'KASSERT(assertion, ("panic message", args))' for simple check + panic. Reviewed by: msmith
1999-01-08 17:31:30 +00:00
INVARIANTS opt_global.h
Move the MSIZE and MCLSHIFT options out of the undocumented section in NOTES. Add some comments about the potential problems associated with NIC driver modules and changing these options. Fix sorting problems in sys/conf/options with the MSIZE and MCLSHIFT options. Reviewed by: bde
2002-07-11 04:15:53 +00:00
MCLSHIFT opt_global.h
Fixed some insertion sort errors.
2004-02-25 09:35:35 +00:00
MUTEX_DEBUG opt_global.h
MUTEX_NOINLINE opt_global.h
MUTEX_PROFILING opt_global.h
Move the MSIZE and MCLSHIFT options out of the undocumented section in NOTES. Add some comments about the potential problems associated with NIC driver modules and changing these options. Fix sorting problems in sys/conf/options with the MSIZE and MCLSHIFT options. Reviewed by: bde
2002-07-11 04:15:53 +00:00
MSIZE opt_global.h
o Introduce "options REGRESSION", a kernel option which enables interfaces and functionality intended for use during correctness and regression testing. Features enabled by "options REGRESSION" may in and of themselves introduce security or correctness problems if used improperly, and so are not intended for use in production systems, only in testing environments. Obtained from: TrustedBSD Project
2001-04-11 19:29:24 +00:00
REGRESSION opt_global.h
Add a new kernel option RESTARTABLE_PANICS. If this option is present, then one can restart from a panic by resetting the panicstr variable to NULL. This commit conditionalizes the previously committed functionality on this variable. It also removes the __dead2 attribute from the panic() function so that when one continues from a panic() the behavior will be predictable.
2001-08-23 20:32:21 +00:00
RESTARTABLE_PANICS opt_global.h
Split DIAGNOSTIC -> DIAGNOSTIC, INVARIANTS, and INVARIANT_SUPPORT as discussed on -hackers. Introduce 'KASSERT(assertion, ("panic message", args))' for simple check + panic. Reviewed by: msmith
1999-01-08 17:31:30 +00:00
VFS_BIO_DEBUG opt_global.h
Try to dynamically size the VM_KMEM_SIZE (but is still able to be overridden in a way identically as before.) I had problems with the system properly handling the number of vnodes when there is alot of system memory, and the default VM_KMEM_SIZE. Two new options "VM_KMEM_SIZE_SCALE" and "VM_KMEM_SIZE_MAX" have been added to support better auto-sizing for systems with greater than 128MB. Add some accouting for vm_zone memory allocations, and provide properly for vm_zone allocations out of the kmem_map. Also move the vm_zone allocation stats to the VM OID tree from the KERN OID tree.
1998-02-23 07:42:43 +00:00
# These are VM related options
Change spaces to tabs where appropriate
1999-11-06 23:51:29 +00:00
VM_KMEM_SIZE opt_vm.h
VM_KMEM_SIZE_SCALE opt_vm.h
Try to dynamically size the VM_KMEM_SIZE (but is still able to be overridden in a way identically as before.) I had problems with the system properly handling the number of vnodes when there is alot of system memory, and the default VM_KMEM_SIZE. Two new options "VM_KMEM_SIZE_SCALE" and "VM_KMEM_SIZE_MAX" have been added to support better auto-sizing for systems with greater than 128MB. Add some accouting for vm_zone memory allocations, and provide properly for vm_zone allocations out of the kmem_map. Also move the vm_zone allocation stats to the VM OID tree from the KERN OID tree.
1998-02-23 07:42:43 +00:00
VM_KMEM_SIZE_MAX opt_vm.h
Change spaces to tabs where appropriate
1999-11-06 23:51:29 +00:00
NO_SWAPPING opt_vm.h
Add a new kernel option, MALLOC_MAKE_FAILURES, which compiles in a debugging feature causing M_NOWAIT allocations to fail at a specified rate. This can be useful for detecting poor handling of M_NOWAIT: the most frequent problems I've bumped into are unconditional deference of the pointer even though it's NULL, and hangs as a result of a lost event where memory for the event couldn't be allocated. Two sysctls are added: debug.malloc.failure_rate How often to generate a failure: if set to 0 (default), this feature is disabled. Otherwise, the frequency of failures -- I've been using 10 (one in ten mallocs fails), but other popular settings might be much lower or much higher. debug.malloc.failure_count Number of times a coerced malloc failure has occurred as a result of this feature. Useful for tracking what might have happened and whether failures are being generated. Useful possible additions: tying failure rate to malloc type, printfs indicating the thread that experienced the coerced failure. Reviewed by: jeffr, jhb
2003-03-26 20:18:40 +00:00
MALLOC_MAKE_FAILURES opt_vm.h
Turn #ifdef LOOKUP_SHARED into #ifndef LOOKUP_EXCLUSIVE to enable this behavior by default. Also, change the options line to reflect this. If there are no problems reported this will become the only behavior and the knob will be removed in a month or so. Demanded by: obrien
2002-04-09 05:14:17 +00:00
MALLOC_PROFILE opt_vm.h
Change spaces to tabs where appropriate
1999-11-06 23:51:29 +00:00
PQ_NOOPT opt_vmpage.h
PQ_NORMALCACHE opt_vmpage.h
PQ_MEDIUMCACHE opt_vmpage.h
PQ_LARGECACHE opt_vmpage.h
PQ_HUGECACHE opt_vmpage.h
Replace the PQ_*CACHE options with a single PQ_CACHESIZE option that you set equal to the number of kilobytes in your cache. The old options are still supported for backwards compatibility. Submitted by: Kelly Yancey <kbyanc@posi.net>
2000-07-04 08:55:18 +00:00
PQ_CACHESIZE opt_vmpage.h
document some VM paging options for cache sizes: PQ_NOOPT no coloring PQ_LARGECACHE used for 512k/16k cache PQ_HUGECACHE used for 1024k/16k cache
1998-06-30 08:01:30 +00:00
Bring in MemGuard, a very simple and small replacement allocator designed to help detect tamper-after-free scenarios, a problem more and more common and likely with multithreaded kernels where race conditions are more prevalent. Currently MemGuard can only take over malloc()/realloc()/free() for particular (a) malloc type(s) and the code brought in with this change manually instruments it to take over M_SUBPROC allocations as an example. If you are planning to use it, for now you must: 1) Put "options DEBUG_MEMGUARD" in your kernel config. 2) Edit src/sys/kern/kern_malloc.c manually, look for "XXX CHANGEME" and replace the M_SUBPROC comparison with the appropriate malloc type (this might require additional but small/simple code modification if, say, the malloc type is declared out of scope). 3) Build and install your kernel. Tune vm.memguard_divisor boot-time tunable which is used to scale how much of kmem_map you want to allott for MemGuard's use. The default is 10, so kmem_size/10. ToDo: 1) Bring in a memguard(9) man page. 2) Better instrumentation (e.g., boot-time) of MemGuard taking over malloc types. 3) Teach UMA about MemGuard to allow MemGuard to override zone allocations too. 4) Improve MemGuard if necessary. This work is partly based on some old patches from Ian Dowse.
2005-01-21 18:09:17 +00:00
# The MemGuard replacement allocator used for tamper-after-free detection
DEBUG_MEMGUARD opt_vm.h
Move the "generic" SMP options from options.i386 to conf/options. This has the useful side-effect of ensuring that opt_smp.h is always generated, so we can assume it will always be available. Prompted by: Andrew Gallatin <gallatin@cs.duke.edu>
1998-12-19 23:07:16 +00:00
# Standard SMP options
SMP opt_global.h
make sys/netkey/key{,_debug}.c compile. I believe it works but not tested. I'll polish the code later on.
1998-02-27 10:02:49 +00:00
Make the size of the msgbuf (dmesg) a "normal" option.
1998-05-19 08:58:53 +00:00
# Size of the kernel message buffer
MSGBUF_SIZE opt_msgbuf.h
This commit fixes various 64bit portability problems required for FreeBSD/alpha. The most significant item is to change the command argument to ioctl functions from int to u_long. This change brings us inline with various other BSD versions. Driver writers may like to use (__FreeBSD_version == 300003) to detect this change. The prototype FreeBSD/alpha machdep will follow in a couple of days time.
1998-06-07 17:13:14 +00:00
convert some nfs tunables to options, these are: NFS_MINATTRTIMO VREG attrib cache timeout in sec NFS_MAXATTRTIMO NFS_MINDIRATTRTIMO VDIR attrib cache timeout in sec NFS_MAXDIRATTRTIMO NFS_GATHERDELAY Default write gather delay (msec) NFS_UIDHASHSIZ Tune the size of nfssvc_sock with this NFS_WDELAYHASHSIZ and with this NFS_MUIDHASHSIZ Tune the size of nfsmount with this NFS_NOSERVER (already documented in LINT) NFS_DEBUG turn on NFS debugging also, because NFS_ROOT is used by very different files, it has been renamed to opt_nfsroot.h instead of the old opt_nfs.h....
1998-06-30 03:01:37 +00:00
# NFS options
NFS_MINATTRTIMO opt_nfs.h
NFS_MAXATTRTIMO opt_nfs.h
NFS_MINDIRATTRTIMO opt_nfs.h
NFS_MAXDIRATTRTIMO opt_nfs.h
NFS_GATHERDELAY opt_nfs.h
NFS_WDELAYHASHSIZ opt_nfs.h
NFS_DEBUG opt_nfs.h
Updated options for the Bt848/Bt878 driver This includes the BKTR_430_FX_MODE and BKTR_SIS_VIA_MODE options which make Bt878/879 cards work better on 430FX and old SiS/VIA/OPTi boards
1999-05-26 13:24:35 +00:00
# For the Bt848/Bt848A/Bt849/Bt878/Bt879 driver
Change spaces to tabs where appropriate
1999-11-06 23:51:29 +00:00
OVERRIDE_CARD opt_bktr.h
OVERRIDE_TUNER opt_bktr.h
OVERRIDE_DBX opt_bktr.h
OVERRIDE_MSP opt_bktr.h
BROOKTREE_SYSTEM_DEFAULT opt_bktr.h
Add new bktr options
2000-10-17 07:59:56 +00:00
BROOKTREE_ALLOC_PAGES opt_bktr.h
BKTR_OVERRIDE_CARD opt_bktr.h
BKTR_OVERRIDE_TUNER opt_bktr.h
BKTR_OVERRIDE_DBX opt_bktr.h
BKTR_OVERRIDE_MSP opt_bktr.h
BKTR_SYSTEM_DEFAULT opt_bktr.h
BKTR_ALLOC_PAGES opt_bktr.h
Change spaces to tabs where appropriate
1999-11-06 23:51:29 +00:00
BKTR_USE_PLL opt_bktr.h
BKTR_GPIO_ACCESS opt_bktr.h
BKTR_NO_MSP_RESET opt_bktr.h
BKTR_430_FX_MODE opt_bktr.h
BKTR_SIS_VIA_MODE opt_bktr.h
Major rework of the iicbus/smbus framework: - VIA chipset SMBus controllers added - alpm driver updated - Support for dynamic modules added - bktr FreeBSD smbus updated but not tested - cleanup
2002-03-23 15:49:15 +00:00
BKTR_USE_FREEBSD_SMBUS opt_bktr.h
Add a overhaul of the soundchip initialization for the MSP34xx chipsets found only many tv-cards. We currently use more ore less evil hacks (slow_msp_audio sysctl) to configure the various variants of these chips in order to have stereo autodetection work. Nevertheless, this doesn't always work even though it _should_, according to the specs. This is, for example, the case for some popular Hauppauge models sold sold in Germany. However, the Linux driver always worked for me and others. Looking at the sourcecode you will find that the linux-driver uses a very much enhanced approach to program the various msp34xx chipset variants, which is also found in the specs for these chips. This is a port of the Linux MSP34xx code, written by Gerd Knorr <kraxel@bytesex.org>, who agreed to re-release his code under a BSD license for this port. A new config option "BKTR_NEW_MSP34XX_DRIVER" is added, which is required to enable the new driver. Otherwise the old code is used. The msp34xx.c file is diff-reduced to the linux-driver to make later modifications easier, thus it doesn't follow style(9) in most cases. Approved by: roger (committing this, no time to test/review), keichii (code review)
2003-08-12 09:45:34 +00:00
BKTR_NEW_MSP34XX_DRIVER opt_bktr.h
Renamed BT848[SG]CAPAREA to BT848_[SG]CAPAREA. Added PR kern/7177 for SECAM Video Highway Xtreme with single crystal PLL configuration submitted by Vsevolod Lobko <seva@alex-ua.com>. In kernel configuration file add options OVERRIDE_CARD=2 options OVERRIDE_TUNER=11 options BKTR_USE_PLL Submitted by: Roger Hardiman <roger@cs.strath.ac.uk>
1998-08-31 18:35:06 +00:00
Fixed comment.
2003-01-18 08:26:42 +00:00
# options for serial support
Change spaces to tabs where appropriate
1999-11-06 23:51:29 +00:00
COM_ESP opt_sio.h
COM_MULTIPORT opt_sio.h
Options cleanup. * GC unused options * Move options that exist on all architectures to conf/options * Add missing options to LINT * Sort undocumented options list in LINT Reviewed by: green
1999-11-06 23:41:10 +00:00
BREAK_TO_DEBUGGER opt_comconsole.h
Add option ALT_BREAK_TO_DEBUGGER. Implement the Solaris way to break into DDB over a serial console instead of sending a break. Sending the character sequence CR ~ ^b will break the kernel into DDB (if DDB is enabled). Reviewed by: peter
2000-06-14 06:41:33 +00:00
ALT_BREAK_TO_DEBUGGER opt_comconsole.h
Move opt_sio.h options to conf/options and activate in isa/sio.c
1999-05-09 13:10:49 +00:00
Add support for using uart(4) for pulse capturing for the Pulse Per Second (PPS) timing interface. The support is non-optional and by default uses the DCD line signal as the pulse input. A compile-time option (UART_PPS_ON_CTS) can be used to have uart(4) use the CTS line signal. Include <sys/timepps.h> in uart_bus.h to avoid having to add the inclusion of that header in all source files. Reviewed by: phk
2003-09-11 23:06:42 +00:00
# Options to support PPS
UART_PPS_ON_CTS opt_uart.h
Add BUS_DEBUG option in opt_bus.h
1998-10-28 08:37:10 +00:00
# options for bus/device framework
BUS_DEBUG opt_bus.h
Initial commit of ported NetBSD USB stack
1998-11-26 23:13:13 +00:00
# options for USB support
USB_DEBUG opt_usb.h
Expose USBVERBOSE as a first-class option. It will be needed soon as an option. Note that this option doesn't follow the normal USB_ or Uxxx_ convention. That's because it is this way in the upstream provider and I didn't want to change that.
2004-05-13 03:15:04 +00:00
USBVERBOSE opt_usb.h
Move UKBD_DFLT_KEYMAP into the options file since USB is machine independent. This allows the ukbd0 driver to compile on the Alpha. Approved by: o`brien (in principle)
2000-05-09 18:23:38 +00:00
UKBD_DFLT_KEYMAP opt_ukbd.h
Make interrupt pipe interval time configurable. - Add kernel options: {UPLCOM,UVSCOM}_INTR_INTERVAL - Add sysctl variables: 'hw.usb.{uplcom,uvscom}.interval' MFC after: 1 week
2003-11-16 12:26:10 +00:00
UPLCOM_INTR_INTERVAL opt_uplcom.h
Fix device freeze to reduce output packet size. And make this value configurable by kernel config or sysctl.
2003-03-09 11:50:27 +00:00
UVSCOM_DEFAULT_OPKTSIZE opt_uvscom.h
Make interrupt pipe interval time configurable. - Add kernel options: {UPLCOM,UVSCOM}_INTR_INTERVAL - Add sysctl variables: 'hw.usb.{uplcom,uvscom}.interval' MFC after: 1 week
2003-11-16 12:26:10 +00:00
UVSCOM_INTR_INTERVAL opt_uvscom.h
Config glue for 'pseudo-device vinum'
1998-12-28 16:31:26 +00:00
Add an INIT_PATH option to allow the init_path (for sys/kern/init_main.c) to be customised in an embedded system which doesn't want to run either init of sysinstall.
1999-05-05 11:24:15 +00:00
# Embedded system options
INIT_PATH opt_init_path.h
Major lobotomy of config(8). The config kernel mumble mumble line has been obsoleted and removed and with it went all knowledge of devices on the part of config. You can still configure a root device (which is used if you give the "-r" flag) but now with an option: options ROOTDEVNAME=\"da0s2e\" The string is parsed by the same code as at the "boot -a" prompt. At the same time, make the "boot -a" prompt both more able and more informative. ALPHA/PC98 people: You will have to adapt a few simple changes (defining rootdev and dumpdev somewhere else) before config works for you again, sorry, but it's all in the name of progress.
1999-05-09 16:46:01 +00:00
ROOTDEVNAME opt_rootdevname.h
Floppy driver options moved to conf/options.
1999-06-05 13:57:10 +00:00
FDC_DEBUG opt_fdc.h
Import simple driver for a parallel port radio clock which receives the German legal time (commonly available in Europe). Submitted by: Sascha Schumann <sascha@schumann.cx>
2000-01-19 18:17:25 +00:00
PCFCLOCK_VERBOSE opt_pcfclock.h
PCFCLOCK_MAX_RETRIES opt_pcfclock.h
Improve consistency, ordering, style of options: - Remove extra blank lines - Sort options - Remove comments that belong in NOTES Submitted by: bde (older revision)
2003-04-15 19:43:52 +00:00
TDFX_LINUX opt_tdfx.h
After much delay and anticipation, welcome RAIDFrame into the FreeBSD world. This should be considered highly experimental. Approved-by: re
2002-10-20 08:17:39 +00:00
Major update to the way synchronization is done in the kernel. Highlights include: * Mutual exclusion is used instead of spl*(). See mutex(9). (Note: The alpha port is still in transition and currently uses both.) * Per-CPU idle processes. * Interrupts are run in their own separate kernel threads and can be preempted (i386 only). Partially contributed by: BSDi (BSD/OS) Submissions by (at least): cp, dfr, dillon, grog, jake, jhb, sheldonh
2000-09-07 01:33:02 +00:00
KTR opt_global.h
- Add options ALQ and KTR_ALQ.
2002-09-22 07:14:27 +00:00
KTR_ALQ opt_ktr.h
- Remove much of the inlining of the KTR tracepoints into a ktr_tracepoint() function declared in kern_ktr.c. The only inline checks left are the checks that compare KTR_COMPILE with the supplied mask and thus should be optimized away into either nothing or a direct call to ktr_tracepoint(). - Move several KTR-related options to opt_ktr.h now that they are only needed by kern_ktr.c and not by ktr.h. - Add in the ktr_verbose functionality if KTR_EXTEND is turned on. If the global variable 'ktr_verbose' is non-zero, then KTR messages will be dumped to the console. This variable can be set by either kernel code or via the 'debug.ktr_verbose' sysctl. It defaults to off unless the KTR_VERBOSE kernel option is specified in which case it defaults to on. This can be useful when the machine locks up spinning in a loop with interrupts disabled as you might be able to see what it is doing when it locks up. Requested by: phk
2000-11-07 01:49:48 +00:00
KTR_MASK opt_ktr.h
KTR_CPUMASK opt_ktr.h
Major update to the way synchronization is done in the kernel. Highlights include: * Mutual exclusion is used instead of spl*(). See mutex(9). (Note: The alpha port is still in transition and currently uses both.) * Per-CPU idle processes. * Interrupts are run in their own separate kernel threads and can be preempted (i386 only). Partially contributed by: BSDi (BSD/OS) Submissions by (at least): cp, dfr, dillon, grog, jake, jhb, sheldonh
2000-09-07 01:33:02 +00:00
KTR_COMPILE opt_global.h
KTR_ENTRIES opt_global.h
- Remove much of the inlining of the KTR tracepoints into a ktr_tracepoint() function declared in kern_ktr.c. The only inline checks left are the checks that compare KTR_COMPILE with the supplied mask and thus should be optimized away into either nothing or a direct call to ktr_tracepoint(). - Move several KTR-related options to opt_ktr.h now that they are only needed by kern_ktr.c and not by ktr.h. - Add in the ktr_verbose functionality if KTR_EXTEND is turned on. If the global variable 'ktr_verbose' is non-zero, then KTR messages will be dumped to the console. This variable can be set by either kernel code or via the 'debug.ktr_verbose' sysctl. It defaults to off unless the KTR_VERBOSE kernel option is specified in which case it defaults to on. This can be useful when the machine locks up spinning in a loop with interrupts disabled as you might be able to see what it is doing when it locks up. Requested by: phk
2000-11-07 01:49:48 +00:00
KTR_VERBOSE opt_ktr.h
Major update to the way synchronization is done in the kernel. Highlights include: * Mutual exclusion is used instead of spl*(). See mutex(9). (Note: The alpha port is still in transition and currently uses both.) * Per-CPU idle processes. * Interrupts are run in their own separate kernel threads and can be preempted (i386 only). Partially contributed by: BSDi (BSD/OS) Submissions by (at least): cp, dfr, dillon, grog, jake, jhb, sheldonh
2000-09-07 01:33:02 +00:00
WITNESS opt_global.h
Update for the KDB framework: o Rename WITNESS_DDB to WITNESS_KDB. In the new world order KDB is the acronym to use for debugging related code. The DDB option is used to enable the DDB debugger backend only. o Likewise, rename DDB_TRACE to KDB_TRACE, rename DDB_UNATTENDED to KDB_UNATTENDED and rename SC_HISTORY_DDBKEY to SC_HISTORY_KDBKEY. o Remove DDB_NOKLDSYM. The new DDB backend supports pre-linker symbol lookups as well as KLD symbol lookups at the same time. o Remove GDB_REMOTE_CHAT. The GDB protocol hacks to allow this are FreeBSD specific. At the same time, the GDB protocol has packets for console output.
2004-07-11 01:44:07 +00:00
WITNESS_KDB opt_witness.h
Add and document the WITNESS_SKIPSPIN and WITNESS_DDB kernel options.
2000-10-27 03:00:28 +00:00
WITNESS_SKIPSPIN opt_witness.h
Major update to the way synchronization is done in the kernel. Highlights include: * Mutual exclusion is used instead of spl*(). See mutex(9). (Note: The alpha port is still in transition and currently uses both.) * Per-CPU idle processes. * Interrupts are run in their own separate kernel threads and can be preempted (i386 only). Partially contributed by: BSDi (BSD/OS) Submissions by (at least): cp, dfr, dillon, grog, jake, jhb, sheldonh
2000-09-07 01:33:02 +00:00
Merge rest piece of ACPI driver.To activate acpi driver ,add device acpi line. Merge finished. But still experimental phase.Need more hack! Obtained from:ACPI for FreeBSD project
2000-08-31 15:34:54 +00:00
# options for ACPI support
ACPI_DEBUG opt_acpi.h
Add OS layer ACPI mutex and threading support. - Temporary fix a bug of Intel ACPI CA core code. - Add OS layer ACPI mutex support. This can be disabled by specifying option ACPI_NO_SEMAPHORES. - Add ACPI threading support. Now that we have a dedicate taskqueue for ACPI tasks and more ACPI task threads can be created by specifying option ACPI_MAX_THREADS. - Change acpi_EvaluateIntoBuffer() behavior slightly to reuse given caller's buffer unless AE_BUFFER_OVERFLOW occurs. Also CM battery's evaluations were changed to use acpi_EvaluateIntoBuffer(). - Add new utility function acpi_ConvertBufferToInteger(). - Add simple locking for CM battery and temperature updating. - Fix a minor problem on EC locking. - Make the thermal zone polling rate to be changeable. - Change minor things on AcpiOsSignal(); in ACPI_SIGNAL_FATAL case, entering Debugger is easier to investigate the problem rather than panic.
2001-12-22 16:05:41 +00:00
ACPI_MAX_THREADS opt_acpi.h
Alphabetical order for ACPI options broken by adding ACPI_NO_RESET_VIDEO. Add short comment about ACPI_NO_RESET_VIDEO into NOTES. Pointed-out by: njl
2003-10-29 14:22:09 +00:00
ACPI_NO_SEMAPHORES opt_acpi.h
Add the ACPICA_PEDANTIC option which is off by default. Enabling it will enable strict checks of the AML. Our default behavior will be to relax checks to work on as many platforms as possible. Also clean up and document other ACPI options while I'm here.
2003-10-22 22:27:49 +00:00
ACPICA_PEDANTIC opt_acpi.h
Add refcounts to the "global" DEVFS inode slots, this allows us to recycle inodes after a destroy_dev() but not until all mounts have picked up the change. Add support for an overflow table for DEVFS inodes. The static table defaults to 1024 inodes, if that fills, an overflow table of 32k inodes is allocated. Both numbers can be changed at compile time, the size of the overflow table also with the sysctl vfs.devfs.noverflow. Use atomic instructions to barrier between make_dev()/destroy_dev() and the mounts. Add lockmgr() locking of directories for operations accessing or modifying the directory TAILQs. Various nitpicking here and there.
2000-09-06 11:26:43 +00:00
# options for DEVFS, see sys/fs/devfs/devfs.h
NDEVFSINO opt_devfs.h
NDEVFSOVERFLOW opt_devfs.h
Turn '#if NSNP > 0' into an option.
2001-01-29 09:43:36 +00:00
# various 'device presence' options.
Fixed some insertion sort errors.
2004-02-25 09:35:35 +00:00
DEV_BPF opt_bpf.h
Fixed comment.
2003-01-18 08:26:42 +00:00
DEV_ISA opt_isa.h
Convert mca (microchannel bus support) from something that we count (bogus) to something that we test for the presence of.
2001-01-29 11:57:27 +00:00
DEV_MCA opt_mca.h
Add CARP (Common Address Redundancy Protocol), which allows multiple hosts to share an IP address, providing high availability and load balancing. Original work on CARP done by Michael Shalayeff, with many additions by Marco Pfatschbacher and Ryan McBride. FreeBSD port done solely by Max Laier. Patch by: mlaier Obtained from: OpenBSD (mickey, mcbride)
2005-02-22 13:04:05 +00:00
DEV_CARP opt_carp.h
Moved the syscons options, kbd options and DEV_SPLASH to the MI options file.
2003-06-18 15:25:01 +00:00
DEV_SPLASH opt_splash.h
Add an option ED_NO_MIIBUS, which causes the `ed' driver to be built without support for miibus PHYs. Most ed cards don't need miibus support, so it's useful to be able to avoid the bloat of all the mii devices for small fixed-purpose kernels.
2001-09-29 22:32:03 +00:00
EISA_SLOTS is mandantory to get opt_eisa.h Put it into MI files.
2003-07-22 11:42:45 +00:00
EISA_SLOTS opt_eisa.h
Add an option ED_NO_MIIBUS, which causes the `ed' driver to be built without support for miibus PHYs. Most ed cards don't need miibus support, so it's useful to be able to avoid the bloat of all the mii devices for small fixed-purpose kernels.
2001-09-29 22:32:03 +00:00
# ed driver
ED_NO_MIIBUS opt_ed.h
Break out obscure ISA cards into their own files, as well as ne2000 and wd80x3 support. Make the obscure ISA cards optional, and add those options to NOTES on i386 (note: the ifdef around the whole code is for module building). Tweak pc98 ed support to include wd80x3 too. Add goo for alpha too. The affected cards are the 3Com 3C503, HP LAN+ and SIC (whatever that is). I couldn't find any of these for sale on ebay, so they are untested. If you have one of these cards, and send it to me, I'll ensure that you have no future problems with it... Minor cleanups as well by using functions rather than cut and paste code for some probing operations (where the function call overhead is lost in the noise). Remove use of kvtop, since they aren't required anymore. This driver needs to get its memory mapped act together, however, and use bus space. It doesn't right now. This reduces the size of if_ed.ko from about 51k to 33k on my laptop.
2005-02-09 20:03:40 +00:00
ED_HPP opt_ed.h
ED_3C503 opt_ed.h
ED_SIC opt_ed.h
Enable polling to be configured into kernels on non i386 platforms. Note that poll_in_trap is only implemented on i386. I've tested this on alpha. Approved by: luigi
2002-02-12 00:26:06 +00:00
Backout the change I made before 5.4-R since I wasn't aware that it was only a problem with one particular switch module. Create a kernel option BGE_FAKE_AUTONEG that restores the 5.4 behavior, which should make the DNLK switch module work. IBM/Intel blades with Intel or AD switch modules should work without patching or kernel options with this commit. Hardware for testing provided by several folks, including Danny Braniss <danny@cs.huji.ac.il>, Achim Patzner <ap@bnc.net>, and OffMyServer. Approved by: re
2005-06-24 21:43:47 +00:00
# bge driver
BGE_FAKE_AUTONEG opt_bge.h
Add code that will download firmware to a Symbol LA4100-series of CF cards. Since the firmware is hard coded into the kernel, I've made it a kernel option (WI_SYMBOL_FIRMWARE). Note: This only downloads into the RAM of these cards. It doesn't download into FLASH, and is somewhat limited. There needs to be a better way to deal, but this works for now. My Symbol LA4132 CF card works now. Obtained from: NetBSD
2002-08-03 00:19:58 +00:00
# wi driver
WI_SYMBOL_FIRMWARE opt_wi.h
Improve consistency, ordering, style of options: - Remove extra blank lines - Sort options - Remove comments that belong in NOTES Submitted by: bde (older revision)
2003-04-15 19:43:52 +00:00
# XXX bogusly global.
Enable polling to be configured into kernels on non i386 platforms. Note that poll_in_trap is only implemented on i386. I've tested this on alpha. Approved by: luigi
2002-02-12 00:26:06 +00:00
DEVICE_POLLING opt_global.h
add "no RNG support options" for ubsec and hifn drivers
2003-06-25 14:49:24 +00:00
speedup stream socket recv handling by tracking the tail of the mbuf chain instead of walking the list for each append Submitted by: ps/jayanth Obtained from: netbsd (jason thorpe)
2003-10-28 05:47:40 +00:00
SOCKBUF_DEBUG opt_global.h
o add crypto driver glue for using the new rndtest driver/module; this is conditional in each driver on foo_RNDTEST being defined_ o bring HIFN_DEBUG and UBSEC_DEBUG out to be visible options; they control the debugging printfs that are set with hw.foo.debug (e.g. hw.hifn.debug)
2003-03-11 22:47:06 +00:00
# options for ubsec driver
UBSEC_DEBUG opt_ubsec.h
UBSEC_RNDTEST opt_ubsec.h
add "no RNG support options" for ubsec and hifn drivers
2003-06-25 14:49:24 +00:00
UBSEC_NO_RNG opt_ubsec.h
o add crypto driver glue for using the new rndtest driver/module; this is conditional in each driver on foo_RNDTEST being defined_ o bring HIFN_DEBUG and UBSEC_DEBUG out to be visible options; they control the debugging printfs that are set with hw.foo.debug (e.g. hw.hifn.debug)
2003-03-11 22:47:06 +00:00
# options for hifn driver
HIFN_DEBUG opt_hifn.h
HIFN_RNDTEST opt_hifn.h
Moved the syscons options, kbd options and DEV_SPLASH to the MI options file.
2003-06-18 15:25:01 +00:00
safenet driver config glue Sponsored by: Global Technology Associates, Inc.
2003-07-21 21:50:41 +00:00
# options for safenet driver
SAFE_DEBUG opt_safe.h
SAFE_NO_RNG opt_safe.h
SAFE_RNDTEST opt_safe.h
Moved the syscons options, kbd options and DEV_SPLASH to the MI options file.
2003-06-18 15:25:01 +00:00
# syscons options
MAXCONS opt_syscons.h
SC_ALT_MOUSE_IMAGE opt_syscons.h
SC_CUT_SPACES2TABS opt_syscons.h
SC_CUT_SEPCHARS opt_syscons.h
SC_DEBUG_LEVEL opt_syscons.h
SC_DFLT_FONT opt_syscons.h
Update for the KDB framework: o Rename WITNESS_DDB to WITNESS_KDB. In the new world order KDB is the acronym to use for debugging related code. The DDB option is used to enable the DDB debugger backend only. o Likewise, rename DDB_TRACE to KDB_TRACE, rename DDB_UNATTENDED to KDB_UNATTENDED and rename SC_HISTORY_DDBKEY to SC_HISTORY_KDBKEY. o Remove DDB_NOKLDSYM. The new DDB backend supports pre-linker symbol lookups as well as KLD symbol lookups at the same time. o Remove GDB_REMOTE_CHAT. The GDB protocol hacks to allow this are FreeBSD specific. At the same time, the GDB protocol has packets for console output.
2004-07-11 01:44:07 +00:00
SC_DISABLE_KDBKEY opt_syscons.h
Moved the syscons options, kbd options and DEV_SPLASH to the MI options file.
2003-06-18 15:25:01 +00:00
SC_DISABLE_REBOOT opt_syscons.h
SC_HISTORY_SIZE opt_syscons.h
SC_KERNEL_CONS_ATTR opt_syscons.h
SC_KERNEL_CONS_REV_ATTR opt_syscons.h
SC_MOUSE_CHAR opt_syscons.h
SC_NO_CUTPASTE opt_syscons.h
SC_NO_FONT_LOADING opt_syscons.h
SC_NO_HISTORY opt_syscons.h
Fixed some insertion sort errors.
2004-02-25 09:35:35 +00:00
SC_NO_SUSPEND_VTYSWITCH opt_syscons.h
Moved the syscons options, kbd options and DEV_SPLASH to the MI options file.
2003-06-18 15:25:01 +00:00
SC_NO_SYSMOUSE opt_syscons.h
SC_NORM_ATTR opt_syscons.h
SC_NORM_REV_ATTR opt_syscons.h
SC_PIXEL_MODE opt_syscons.h
SC_RENDER_DEBUG opt_syscons.h
SC_TWOBUTTON_MOUSE opt_syscons.h
# kbd options
KBD_DISABLE_KEYMAP_LOAD opt_kbd.h
KBD_INSTALL_CDEV opt_kbd.h
KBD_MAXRETRY opt_kbd.h
KBD_MAXWAIT opt_kbd.h
KBD_RESETDELAY opt_kbd.h
KBDIO_DEBUG opt_kbd.h
config+build glue for Atheros support
2003-06-25 14:51:20 +00:00
# options for the Atheros HAL (only useful with source code)
AH_SUPPORT_AR5210 opt_ah.h
AH_SUPPORT_AR5211 opt_ah.h
AH_SUPPORT_AR5212 opt_ah.h
update for new ath hal
2004-12-08 18:20:53 +00:00
AH_SUPPORT_5111 opt_ah.h
AH_SUPPORT_5112 opt_ah.h
AH_SUPPORT_2413 opt_ah.h
config+build glue for Atheros support
2003-06-25 14:51:20 +00:00
AH_DEBUG opt_ah.h
AH_DEBUG_ALQ opt_ah.h
AH_ASSERT opt_ah.h
Add dumb console driver and related bits. dcons(4): very simple console and gdb port driver dcons_crom(4): FireWire attachment dconschat(8): User interface to dcons Tested with: i386, i386-PAE, and sparc64.
2003-10-24 15:44:10 +00:00
# dcons options
DCONS_BUF_SIZE opt_dcons.h
DCONS_POLL_HZ opt_dcons.h
DCONS_FORCE_CONSOLE opt_dcons.h
DCONS_FORCE_GDB opt_dcons.h
Kill count device support from config. I've changed the last few remaining consumers to have the count passed as an option. This is i4b, pc98/wdc, and coda. Bump configvers.h from 500013 to 600000. Remove heuristics that tried to parse "device ed5" as 5 units of the ed device. This broke things like the snd_emu10k1 device, which required quotes to make it parse right. The no-longer-needed quotes have been removed from NOTES, GENERIC etc. eg, I've removed the quotes from: device snd_maestro device "snd_maestro3" device snd_mss I believe everything will still compile and work after this.
2004-08-30 23:03:58 +00:00
# Static unit counts
NI4BTRC opt_i4b.h
NI4BRBCH opt_i4b.h
NI4BTEL opt_i4b.h
NI4BIPR opt_i4b.h
NI4BING opt_i4b.h
NI4BISPPP opt_i4b.h
- Move LOOKUP_SHARED from opt_global.h to opt_vfs.h so we don't have to recompile the whole kernel if we change it.
2005-04-03 23:49:13 +00:00
# VFS options
LOOKUP_SHARED opt_vfs.h
Bring a working snapshot of hwpmc(4), its associated libraries, userland utilities and documentation into -CURRENT. Bump FreeBSD_version. Reviewed by: alc, jhb (kernel changes)
2005-04-19 04:01:25 +00:00
# HWPMC options
Move HWPMC_HOOKS into its own opt_hwpmc_hooks.h file. It doesn't merit being in opt_global.h and forcing a global recompile when only a few files reference it. Approved by: re
2005-06-24 00:16:57 +00:00
HWPMC_HOOKS
Reference in New Issue Copy Permalink