d/freebsd-dev
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
a321cc5dc9
freebsd-dev/sys/conf/files.arm

144 lines
5.8 KiB
Plaintext
Raw Normal View History

Add config magic for arm.
2004-05-14 11:49:40 +00:00
# $FreeBSD$
Align.
2007-10-25 14:16:07 +00:00
arm/arm/autoconf.c standard
arm/arm/bcopy_page.S standard
Add config magic for arm.
2004-05-14 11:49:40 +00:00
arm/arm/bcopyinout.S standard
arm/arm/blockio.S standard
arm/arm/bus_space_asm_generic.S standard
Move more bus_space_* files to be built by files.arm. This leaves the definition in a file.* file under sys/arm/arm in the few cases we need it for non-fdt platforms. Sponsored by: ABT Systems Ltd
2015-11-21 15:30:08 +00:00
arm/arm/bus_space_base.c optional fdt
arm/arm/bus_space_generic.c standard
Rename busdma_machdep.c to busdma_machdep-v4.c, pmap.c to pmap-v4.c and trap.c to trap-v4.c to be plain and consistent with other armv4 specific files.
2016-02-20 07:45:21 +00:00
arm/arm/busdma_machdep-v4.c optional !armv6
Add ARMV6 as an arm option. This will cause obscure magic in config(8) to automatically set the armv6 option when MACHINE_ARCH is armv6. That allows replacing ever-growing lists of cpu names as options to compile a given file with the using either "optional armv6" or "optional !armv6".
2014-11-24 00:02:15 +00:00
arm/arm/busdma_machdep-v6.c optional armv6
Add config magic for arm.
2004-05-14 11:49:40 +00:00
arm/arm/copystr.S standard
arm/arm/cpufunc.c standard
arm/arm/cpufunc_asm.S standard
ARM: All remaining functions in cpufunc_asm_arm10.S are identical with functions in cpufunc_asm_arm9.S. Use arm9 variants and remove cpufunc_asm_arm10.S completly.
2016-02-02 14:53:34 +00:00
arm/arm/cpufunc_asm_arm9.S optional cpu_arm9 | cpu_arm9e
Build the cpufunc_asm_* files based on the cpu type, not which config file we happen to be building.
2015-03-29 22:43:39 +00:00
arm/arm/cpufunc_asm_arm11.S optional cpu_arm1176
arm/arm/cpufunc_asm_arm11x6.S optional cpu_arm1176
ARM: Remove support for xscale i80219 and i80321 CPUs. We haven't single supported config/board with these CPUs.
2016-02-03 09:15:44 +00:00
arm/arm/cpufunc_asm_armv4.S optional cpu_arm9 | cpu_arm9e | cpu_fa526 | cpu_xscale_pxa2x0 | cpu_xscale_ixp425 | cpu_xscale_81342
Build the cpufunc_asm_* files based on the cpu type, not which config file we happen to be building.
2015-03-29 22:43:39 +00:00
arm/arm/cpufunc_asm_armv5_ec.S optional cpu_arm9e
arm/arm/cpufunc_asm_armv6.S optional cpu_arm1176
arm/arm/cpufunc_asm_armv7.S optional cpu_cortexa | cpu_krait | cpu_mv_pj4b
arm/arm/cpufunc_asm_fa526.S optional cpu_fa526
arm/arm/cpufunc_asm_pj4b.S optional cpu_mv_pj4b
arm/arm/cpufunc_asm_sheeva.S optional cpu_arm9e
ARM: Remove support for xscale i80219 and i80321 CPUs. We haven't single supported config/board with these CPUs.
2016-02-03 09:15:44 +00:00
arm/arm/cpufunc_asm_xscale.S optional cpu_xscale_pxa2x0 | cpu_xscale_ixp425 | cpu_xscale_81342
Build the cpufunc_asm_* files based on the cpu type, not which config file we happen to be building.
2015-03-29 22:43:39 +00:00
arm/arm/cpufunc_asm_xscale_c3.S optional cpu_xscale_81342
Add new code to read and parse cpu identification data using the new CPUID mechanism defined for armv7 (and also present on some armv6 chips including the arm1176 used on rpi). The information is parsed into a global cpuinfo structure, which will be used by (upcoming) new cache and tlb maintenance code to handle cpu-specific variations of the maintence sequences. Submitted by: Svatopluk Kraus <onwahe@gmail.com>, Michal Meloun <meloun@miracle.cz
2014-12-28 18:12:56 +00:00
arm/arm/cpuinfo.c standard
Add cache maintenance functions which will be used by startup code to initially set up the MMU. Some day they may also be useful as part of suspend/resume handling, when we get better at power management. Submitted by: Svatopluk Kraus <onwahe@gmail.com>, Michal Meloun <meloun@miracle.cz
2014-12-28 18:38:25 +00:00
arm/arm/cpu_asm-v6.S optional armv6
Add config magic for arm.
2004-05-14 11:49:40 +00:00
arm/arm/db_disasm.c optional ddb
arm/arm/db_interface.c optional ddb
arm/arm/db_trace.c optional ddb
Introduce support for HW watchpoints and single stepping for ARMv6/v7 Allows for using hardware watchpoints for 1, 2, 4, 8 byte long addresses. The default configuration of watchpoint is RW but code allows to select RO or WO and X. Since debugging registers are per-CPU (CP14) the watchpoint is set on the CPU that was lucky (or not) to enter DDB. HW breakpoints are used to perform single step in KDB. When HW breakpoint is enabled all watchpoints are temporary disabled to avoid recursive abort on both watchpoint and breakpoint. In case of branch, the breakpoint is set to both - next instruction and possible branch address. This requires at least 2 breakpoints supported in the CPU however this is a must for ARMv6/v7 CPUs. Reviewed by: imp Submitted by: Zbigniew Bodek <zbb@semihalf.com> Obtained from: Semihalf Sponsored by: Juniper Networks Inc. Differential Revision: https://reviews.freebsd.org/D4037
2016-01-25 18:02:28 +00:00
arm/arm/debug_monitor.c optional ddb armv6
This files should have been included in r257648.
2013-11-04 20:00:21 +00:00
arm/arm/devmap.c standard
Make arm/disassem.c depends on DDB make arm/in_cksum.c and arm/in_cksum_asm.S depend on INET.
2005-10-04 14:37:53 +00:00
arm/arm/disassem.c optional ddb
Add config magic for arm.
2004-05-14 11:49:40 +00:00
arm/arm/dump_machdep.c standard
arm/arm/elf_machdep.c standard
Add an elf not so kgdb detects the kernel as a FreeBSD elf file. The ELFNOTE macro is based on one from the FreeBSD/ARM Xen tree [1]. Obtained from: Julien Grall <julien.grall AT linaro.org> [1]
2014-10-18 13:38:04 +00:00
arm/arm/elf_note.S standard
Add config magic for arm.
2004-05-14 11:49:40 +00:00
arm/arm/exception.S standard
arm/arm/fiq.c standard
arm/arm/fiq_subr.S standard
arm/arm/fusu.S standard
Add remote GDB bits for arm.
2006-07-14 00:50:51 +00:00
arm/arm/gdb_machdep.c optional gdb
Create device options for the two common ARM timers. Sponsored by: ABT Systems Ltd
2015-11-21 16:23:56 +00:00
arm/arm/generic_timer.c optional generic_timer
Add the gic to files.arm under "device gic" and use it with the CUBIEBOARD2 config. This is common across a few SoCs so should be a common option.
2015-05-10 09:33:03 +00:00
arm/arm/gic.c optional gic
Move hdmi_if.m to files.arm so other kernel configs can use it.
2015-11-21 16:25:03 +00:00
arm/arm/hdmi_if.m optional hdmi
Add config magic for arm.
2004-05-14 11:49:40 +00:00
arm/arm/identcpu.c standard
Compile in in_cksum* implementations for both IPv6 and IPv6. While in_pseudo() etc. is often used in offloading feature support, in_cksum() is mostly used to fix some broken hardware. Keeping both around for the moment allows us to compile NIC drivers even in an IPv6 only environment without the need to mangle them with #ifdef INETs in a way they are not prepared for. This will leave some dead code paths that will not be exercised for IPv6. Reviewed by: gnn Sponsored by: The FreeBSD Foundation Sponsored by: iXsystems MFC after: 3 days
2011-04-20 12:58:30 +00:00
arm/arm/in_cksum.c optional inet | inet6
arm/arm/in_cksum_arm.S optional inet | inet6
Import ARM_INTRNG, the "next generation" interrupt architecture for arm and armv6 architecures. The primary enhancement over the old design is support for hierarchical interrupt controllers (such as a gpio driver which can receive interrupts from a root PIC and act as a PIC itself for clients interested in handling a change of gpio pin state as an interrupt). The new code also provides an infrastructure for mapping interrupts described in metadata in the form of a "controller reference plus interrupt number" tuple into the simple "0-n" flat numeric space understood by rman and the bus resource mechanisms. Use of the new code is enabled by setting the ARM_INTRNG option, and by making a few simple changes to the platform's support code. In addition each existing PIC driver needs changes to be ready for INTRNG; this commit contains the changes for the arm/gic driver, which most armv6 SoCs use, but it does not enable the new code yet on any platform. This project has been many years in the making, starting as a GSoC project by Jakub Klama (jceel@) in 2012. That didn't get committed right away and the source base evolved out from under it to some degree. In 2014 I rebased the diffs to then -current and did some enhancements in the area of mapping interrupt numbers and storing associated fdt data, then the project went cold again for a while. Eventually Svata Kraus took that work in progress and did another big round of work on it, removing most of the remaining rough edges. Finally I took that and made one more pass through it, mostly disabling the "INTR_SOLO" feature for now, pending further design discussions on how to most efficiently dispatch a pending interrupt through more than one layer of PIC. The current code with the INTR_SOLO feature disabled uses approximate 100 extra cpu cycles for each cascaded PIC the interrupt has to be passed to, so what's left to do is about efficiency, not correct operation. Differential Revision: https://reviews.freebsd.org/D2047
2015-10-18 18:26:19 +00:00
arm/arm/intr.c optional !arm_intrng
[intrng] Migrate the intrng code from sys/arm/arm to sys/kern/subr_intr.c. The ci20 port (by kan@) is going to reuse almost all of the intrng code since the SoC in question looks suspiciously like someone took an ARM SoC design and replaced the ARM core with a MIPS core. * migrate out the code; * rename ARM_ -> INTR_; * rename arm_ -> intr_; * move the interrupt flush routine from intr.c / intrng.c into arm/machdep_intr.c - removing the code duplication and removing the ARM specific bits from here. Thanks to the Star Wars: The Force Awakens premiere line for allowing me a couple hours of quiet time to finish the universe builds. Tested: * make universe TODO: * The structure definitions in subr_intr.c still includes machine/intr.h which requires one duplicates all of the intrng definitions in the platform code (which kan has done, and I think we don't have to.) Instead I should break out the generic things (function declarations, common intr structures, etc) into a separate header. * Kan has requested I make the PIC based IPI stuff optional.
2015-12-18 05:43:59 +00:00
kern/subr_intr.c optional arm_intrng
Add config magic for arm.
2004-05-14 11:49:40 +00:00
arm/arm/locore.S standard no-obj
arm/arm/machdep.c standard
[intrng] Migrate the intrng code from sys/arm/arm to sys/kern/subr_intr.c. The ci20 port (by kan@) is going to reuse almost all of the intrng code since the SoC in question looks suspiciously like someone took an ARM SoC design and replaced the ARM core with a MIPS core. * migrate out the code; * rename ARM_ -> INTR_; * rename arm_ -> intr_; * move the interrupt flush routine from intr.c / intrng.c into arm/machdep_intr.c - removing the code duplication and removing the ARM specific bits from here. Thanks to the Star Wars: The Force Awakens premiere line for allowing me a couple hours of quiet time to finish the universe builds. Tested: * make universe TODO: * The structure definitions in subr_intr.c still includes machine/intr.h which requires one duplicates all of the intrng definitions in the platform code (which kan has done, and I think we don't have to.) Instead I should break out the generic things (function declarations, common intr structures, etc) into a separate header. * Kan has requested I make the PIC based IPI stuff optional.
2015-12-18 05:43:59 +00:00
arm/arm/machdep_intr.c standard
Add arm/mem.c.
2004-11-22 22:20:50 +00:00
arm/arm/mem.c optional mem
Support kernel crash mini dumps on ARM architecture. Obtained from: Juniper Networks, Semihalf
2008-11-06 16:20:27 +00:00
arm/arm/minidump_machdep.c optional mem
Merging projects/armv6, part 1 Cummulative patch of changes that are not vendor-specific: - ARMv6 and ARMv7 architecture support - ARM SMP support - VFP/Neon support - ARM Generic Interrupt Controller driver - Simplification of startup code for all platforms
2012-08-15 03:03:03 +00:00
arm/arm/mp_machdep.c optional smp
Create device options for the two common ARM timers. Sponsored by: ABT Systems Ltd
2015-11-21 16:23:56 +00:00
arm/arm/mpcore_timer.c optional mpcore_timer
Cleanup : make nexus standard, as it is mandatory anyway. Garbage-collect unused nexus_io.c and nexus_io_asm.S Submitted by: Rafal Jaworowski <raj AT semihalf DOT com>
2007-12-02 13:10:42 +00:00
arm/arm/nexus.c standard
Implement OF_decode_addr() for arm. Move most of powerpc's implementation into a new function that other platforms can share. This creates a new ofw_reg_to_paddr() function (in a new ofw_subr.c file) that contains most of the existing ppc implementation, mostly unchanged. The ppc code now calls the new MI code from the MD code, then creates a ppc-specific bus_space mapping from the results. The new arm implementation does the same in an arm-specific way. This also moves the declaration of OF_decode_addr() from ofw_machdep.h to openfirm.h, except on sparc64 which uses a different function signature. This will help all FDT platforms to set up early console access using OF_decode_addr().
2015-12-21 18:07:32 +00:00
arm/arm/ofw_machdep.c optional fdt
Consolidate code related to setting up physical memory configuration into a new physmem.c file. The new code provides helper routines that can be used by legacy SoCs and newer FDT-based systems. There are routines to add one or more regions of physically contiguous ram, and exclude one or more physically contiguous regions of ram. Ram can be excluded from crash dumps, from being given over to the vm system for allocation management, or both. After all the included and excluded regions have been added, arm_physmem_init_kernel_globals() processes the regions into the global dump_avail and phys_avail arrays and realmem and physmem variables that communicate memory configuration to the rest of the kernel. Convert all existing SoCs to use the new helper code.
2014-02-08 23:54:16 +00:00
arm/arm/physmem.c standard
Add driver for PrimeCell Vectored Interrupt Controller (PL190)
2012-12-13 23:03:37 +00:00
arm/arm/pl190.c optional pl190
Merging projects/armv6, part 1 Cummulative patch of changes that are not vendor-specific: - ARMv6 and ARMv7 architecture support - ARM SMP support - VFP/Neon support - ARM Generic Interrupt Controller driver - Simplification of startup code for all platforms
2012-08-15 03:03:03 +00:00
arm/arm/pl310.c optional pl310
Add the start of the ARM platform code. This is based on the PowerPC platform code, it is expected these will be merged in the future when the ARM code is more complete. Until more boards can be tested only use this with the Raspberry Pi and rrename the functions on the other SoCs. Reviewed by: ian@
2014-05-17 11:27:36 +00:00
arm/arm/platform.c optional platform
arm/arm/platform_if.m optional platform
Rename busdma_machdep.c to busdma_machdep-v4.c, pmap.c to pmap-v4.c and trap.c to trap-v4.c to be plain and consistent with other armv4 specific files.
2016-02-20 07:45:21 +00:00
arm/arm/pmap-v4.c optional !armv6
ARM: After removal of old pmap-v6 code, rename pmap-v6-new.c to pmap-v6.c.
2016-01-29 11:00:33 +00:00
arm/arm/pmap-v6.c optional armv6
2nd try, after r289319: HWPMC depends on pmu.c even if device pmu is not specified. Would be great if we could just automatically enabled "device pmu" if we try to compile in HWPMC. Also several old kernel cnfigurations seem to have HWPMC enabled but are pre-FDT and thus fail. So make pmu.c depend on fdt in case of hwpmc as well. MFC after: 2 weeks Sponsored by: DARPA/AFRL Differential Revision: https://reviews.freebsd.org/D3877
2015-10-15 01:51:10 +00:00
arm/arm/pmu.c optional pmu | fdt hwpmc
Piggyback MIPS changes and add ARM syscons support for devices with framebuffer While here - sort #if defined() order alphabetically
2012-08-25 23:59:31 +00:00
arm/arm/sc_machdep.c optional sc
Add config magic for arm.
2004-05-14 11:49:40 +00:00
arm/arm/setcpsr.S standard
arm/arm/setstack.s standard
Break out stack(9) from ddb(4): - Introduce per-architecture stack_machdep.c to hold stack_save(9). - Introduce per-architecture machine/stack.h to capture any common definitions required between db_trace.c and stack_machdep.c. - Add new kernel option "options STACK"; we will build in stack(9) if it is defined, or also if "options DDB" is defined to provide compatibility with existing users of stack(9). Add new stack_save_td(9) function, which allows the capture of a stacktrace of another thread rather than the current thread, which the existing stack_save(9) was limited to. It requires that the thread be neither swapped out nor running, which is the responsibility of the consumer to enforce. Update stack(9) man page. Build tested: amd64, arm, i386, ia64, powerpc, sparc64, sun4v Runtime tested: amd64 (rwatson), arm (cognet), i386 (rwatson)
2007-12-02 20:40:35 +00:00
arm/arm/stack_machdep.c optional ddb | stack
Add C11 atomic fallbacks for ARM. Basically the situation is as follows: - When using Clang + armv6, we should not need any intrinsics. It should support it, even though due to a target misconfiguration it does not. We should fix this in Clang. - When using Clang + noarmv6, provide __atomic_* functions that disable interrupts. - When using GCC + armv6, we can provide __sync_* intrinsics, similar to what we did for MIPS. As ARM and MIPS are quite similar, simply base this implementation on the one I did for MIPS. - When using GCC + noarmv6, disable the interrupts, like we do for Clang. This implementation still lacks functions for noarmv6 userspace. To be done.
2013-06-13 18:46:49 +00:00
arm/arm/stdatomic.c standard \
compile-with "${NORMAL_C:N-Wmissing-prototypes}"
Add config magic for arm.
2004-05-14 11:49:40 +00:00
arm/arm/support.S standard
arm/arm/swtch.S standard
ARM: Split swtch.S into common, ARMv4 and ARMv6 parts. Cleanup them.
2016-01-30 08:02:12 +00:00
arm/arm/swtch-v4.S optional !armv6
arm/arm/swtch-v6.S optional armv6
Add config magic for arm.
2004-05-14 11:49:40 +00:00
arm/arm/sys_machdep.c standard
Split you the syscall handling to a separate file.
2014-10-01 12:44:16 +00:00
arm/arm/syscall.c standard
Rename busdma_machdep.c to busdma_machdep-v4.c, pmap.c to pmap-v4.c and trap.c to trap-v4.c to be plain and consistent with other armv4 specific files.
2016-02-20 07:45:21 +00:00
arm/arm/trap-v4.c optional !armv6
Add a new trap-v6.c which has support for all armv7 exceptions. This mostly paves the way for the new pmap code, and shouldn't result in any noticible behavior differences. Submitted by: Svatopluk Kraus <onwahe@gmail.com>, Michal Meloun <meloun@miracle.cz
2015-01-03 22:33:18 +00:00
arm/arm/trap-v6.c optional armv6
Add config magic for arm.
2004-05-14 11:49:40 +00:00
arm/arm/uio_machdep.c standard
arm/arm/undefined.c standard
Use the ARM unwinder with dtrace to extract the stack when asked. With this dtrace is able to display a stack trace similar to the one below. # dtrace -p 603 -n 'tcp:kernel::receive { stack(); }' 0 70 :receive kernel`ip_input+0x140 kernel`netisr_dispatch_src+0xb8 kernel`ether_demux+0x1c4 kernel`ether_nh_input+0x3a8 kernel`netisr_dispatch_src+0xb8 kernel`ether_input+0x60 kernel`cpsw_intr_rx+0xac kernel`intr_event_execute_handlers+0x128 kernel`ithread_loop+0xb4 kernel`fork_exit+0x84 kernel`swi_exit kernel`swi_exit Tested by: gnn Sponsored by: ABT Systems Ltd
2015-02-19 12:20:21 +00:00
arm/arm/unwind.c optional ddb | kdtrace_hooks
Add config magic for arm.
2004-05-14 11:49:40 +00:00
arm/arm/vm_machdep.c standard
Rename device vfp to option VFP and retire the ARM_VFP_SUPPORT option. This simplifies enabling as previously both options were required to be enabled, now we only need a single option. While here enable VFP on the PandaBoard.
2013-08-17 18:51:38 +00:00
arm/arm/vfp.c standard
Sort and remove a few long-obsolete comments.
2012-10-25 05:22:25 +00:00
board_id.h standard \
dependency "$S/arm/conf/genboardid.awk $S/arm/conf/mach-types" \
compile-with "${AWK} -f $S/arm/conf/genboardid.awk $S/arm/conf/mach-types > board_id.h" \
no-obj no-implicit-rule before-depend \
clean "board_id.h"
Allow DTrace to be compiled-in to the kernel. This will require for AArch64 as we dont have modules yet. Sponsored by: HEIF5 Sponsored by: ARM Ltd. Differential Revision: https://reviews.freebsd.org/D1997
2015-06-10 15:53:39 +00:00
cddl/compat/opensolaris/kern/opensolaris_atomic.c optional zfs | dtrace compile-with "${CDDL_C}"
cddl/dev/dtrace/arm/dtrace_asm.S optional dtrace compile-with "${DTRACE_S}"
cddl/dev/dtrace/arm/dtrace_subr.c optional dtrace compile-with "${DTRACE_C}"
cddl/dev/fbt/arm/fbt_isa.c optional dtrace_fbt | dtraceall compile-with "${FBT_C}"
Sort and remove a few long-obsolete comments.
2012-10-25 05:22:25 +00:00
crypto/blowfish/bf_enc.c optional crypto | ipsec
- Trim an unused and bogus Makefile for mount_smbfs. - Reconnect with some minor modifications, in particular now selsocket() internals are adapted to use sbintime units after recent'ish calloutng switch.
2013-06-28 21:00:08 +00:00
crypto/des/des_enc.c optional crypto | ipsec | netsmb
Add alternate descriptors support for if_dwc. This also adds a newbus interface that allows a SoC to override the following settings: - if_dwc specific SoC initialization; - if_dwc descriptor type; - if_dwc MII clock. This seems to be an old version of the hardware descriptors but it is still in use in a few SoCs (namely Allwinner A20 and Amlogic at least). Tested on Cubieboard2 and Banana pi. Tested for regressions on Altera Cyclone by br@ (old version). Obtained from: NetBSD
2015-09-20 14:13:29 +00:00
dev/dwc/if_dwc.c optional dwc
dev/dwc/if_dwc_if.m optional dwc
Piggyback MIPS changes and add ARM syscons support for devices with framebuffer While here - sort #if defined() order alphabetically
2012-08-25 23:59:31 +00:00
dev/fb/fb.c optional sc
Add the start of the ARM platform code. This is based on the PowerPC platform code, it is expected these will be merged in the future when the ARM code is more complete. Until more boards can be tested only use this with the Raspberry Pi and rrename the functions on the other SoCs. Reviewed by: ian@
2014-05-17 11:27:36 +00:00
dev/fdt/fdt_arm_platform.c optional platform fdt
Add hwpmc_arm.c
2009-12-23 23:53:30 +00:00
dev/hwpmc/hwpmc_arm.c optional hwpmc
Remove all the handcrafted assembly in hwpmc_armv7.c and use the common (autogenerated) versions. Removes extra vertical space, and makes it easier to grep for usage throughout the tree. Conditionally compile only for arm6 [1] (yes sounds odd but is right). Submitted by: andrew [1] Reviewed by: gnn, andrew (ian earlier version I think) Differential Revision: https://reviews.freebsd.org/D2159 Obtained from: Cambridge/L41 Sponsored by: DARPA, AFRL
2015-03-28 18:57:13 +00:00
dev/hwpmc/hwpmc_armv7.c optional hwpmc armv6
Move the twsi driver source to be under iicbus. It is in a separate directory as it is expected multiple attachments will be added for the SoC families that use this hardware. Sponsored by: ABT Systems Ltd
2016-02-14 23:51:13 +00:00
dev/iicbus/twsi/twsi.c optional twsi
Build ofw_cpu.c on all ARM configs using FDT. As we mve towards using the Linux dts files these are more likely to have cpu nodes we can attach to. Sponsored by: ABT Systems Ltd
2016-02-28 09:35:37 +00:00
dev/ofw/ofw_cpu.c optional fdt
Reduce OFW PCI code duplication - involves ARM, PPC and SPARC64 Import portions of the PowerPC OF PCI implementation into new file "ofwpci.c", common for other platforms. The files ofw_pci.c and ofw_pci.h from sys/powerpc/ofw no longer exist. All required declarations are moved to sys/dev/ofw/ofwpci.h. This creates a new ofw_pci_write_ivar() function and modifies some others methods. Most functions contain existing ppc implementations in the majority unchanged. Now there is no need to have multiple identical copies of methods for various architectures. Requested by: jhibbits Reviewed by: jhibbits, marius Submitted by: Marcin Mazurek <mma@semihalf.com> Obtained from: Semihalf Sponsored by: Annapurna Labs Differential Revision: https://reviews.freebsd.org/D4879
2016-03-29 15:19:56 +00:00
dev/ofw/ofwpci.c optional fdt pci
Adding pci_host_generic unconditionally breaks ARM boards with a PCI(e) interface. Make it a device option to be included in the kernel configs that request this file. Reported by: mmel Suggested by: mmel Reviewed by: mmel Differential Revision: https://reviews.freebsd.org/D5699
2016-03-22 12:12:01 +00:00
dev/pci/pci_host_generic.c optional pci_host_generic pci fdt
Add a driver for the ARM Power State Coordination Interface (PSCI). This handles versions 0.1 and 0.2 of the standard on 32-bit ARM. With this driver we can shutdown in QEMU. Further work is needed to turn secondary cores on on boot and to support later revisions of the specification. Submitted by: Robin Randhawa <Robin.Randhawa at ARM.com> Sponsored by: The FreeBSD Foundation
2015-04-12 13:00:58 +00:00
dev/psci/psci.c optional psci
dev/psci/psci_arm.S optional psci
Piggyback MIPS changes and add ARM syscons support for devices with framebuffer While here - sort #if defined() order alphabetically
2012-08-25 23:59:31 +00:00
dev/syscons/scgfbrndr.c optional sc
dev/syscons/scterm-teken.c optional sc
dev/syscons/scvtb.c optional sc
Add basic support for FDT to i386 & amd64. This change includes: 1. Common headers for fdt.h and ofw_machdep.h under x86/include with indirections under i386/include and amd64/include. 2. New modinfo for loader provided FDT blob. 3. Common x86_init_fdt() called from hammer_time() on amd64 and init386() on i386. 4. Split-off FDT specific low-level console functions from FDT bus methods for the uart(4) driver. The low-level console logic has been moved to uart_cpu_fdt.c and is used for arm, mips & powerpc only. The FDT bus methods are shared across all architectures. 5. Add dev/fdt/fdt_x86.c to hold the fdt_fixup_table[] and the fdt_pic_table[] arrays. Both are empty right now. FDT addresses are I/O ports on x86. Since the core FDT code does not handle different address spaces, adding support for both I/O ports and memory addresses requires some thought and discussion. It may be better to use a compile-time option that controls this. Obtained from: Juniper Networks, Inc.
2013-05-21 03:05:49 +00:00
dev/uart/uart_cpu_fdt.c optional uart fdt
Sort and remove a few long-obsolete comments.
2012-10-25 05:22:25 +00:00
font.h optional sc \
compile-with "uudecode < /usr/share/syscons/fonts/${SC_DFLT_FONT}-8x16.fnt && file2c 'u_char dflt_font_16[16*256] = {' '};' < ${SC_DFLT_FONT}-8x16 > font.h && uudecode < /usr/share/syscons/fonts/${SC_DFLT_FONT}-8x14.fnt && file2c 'u_char dflt_font_14[14*256] = {' '};' < ${SC_DFLT_FONT}-8x14 >> font.h && uudecode < /usr/share/syscons/fonts/${SC_DFLT_FONT}-8x8.fnt && file2c 'u_char dflt_font_8[8*256] = {' '};' < ${SC_DFLT_FONT}-8x8 >> font.h" \
no-obj no-implicit-rule before-depend \
clean "font.h ${SC_DFLT_FONT}-8x14 ${SC_DFLT_FONT}-8x16 ${SC_DFLT_FONT}-8x8"
Sort so pic_if.m is in the correct location with the other kern files. Obtained from: ABT Systems Ltd Sponsored by: The FreeBSD Foundation
2016-04-14 15:52:11 +00:00
kern/pic_if.m optional arm_intrng
We want to build subr_busdma_bufalloc.c on arm.
2012-12-20 00:57:24 +00:00
kern/subr_busdma_bufalloc.c standard
Merge all MD sf_buf allocators into one MI, residing in kern/subr_sfbuf.c The MD allocators were very common, however there were some minor differencies. These differencies were all consolidated in the MI allocator, under ifdefs. The defines from machine/vmparam.h turn on features required for a particular machine. For details look in the comment in sys/sf_buf.h. As result no MD code left in sys/*/*/vm_machdep.c. Some arches still have machine/sf_buf.h, which is usually quite small. Tested by: glebius (i386), tuexen (arm32), kevlo (arm32) Reviewed by: kib Sponsored by: Netflix Sponsored by: Nginx, Inc.
2014-08-05 09:44:10 +00:00
kern/subr_sfbuf.c standard
Move the __aeabi_unwind_cpp_pr{0,1,2} functions to libkern so they can be referenced in a non-debug kernel.
2013-03-16 04:06:49 +00:00
libkern/arm/aeabi_unwind.c standard
Add config magic for arm.
2004-05-14 11:49:40 +00:00
libkern/arm/divsi3.S standard
libkern/arm/ffs.S standard
Add the required __aeabi_* functions the kernel uses when built for ARM EABI
2013-01-17 09:37:42 +00:00
libkern/arm/ldivmod.S standard
libkern/arm/ldivmod_helper.c standard
Add support for __aeabi_memclr4, clang 3.7 calls it. Sponsored by: ABT Systems Ltd
2015-07-09 20:54:38 +00:00
libkern/arm/memclr.S standard
Add __aeabi_memcpy to libkern as clang may generate calls to it.
2013-03-10 07:55:40 +00:00
libkern/arm/memcpy.S standard
Add __aeabi_memset to libkern, implemented using memset, as clang may generate calls to it.
2013-03-16 23:11:55 +00:00
libkern/arm/memset.S standard
Add config magic for arm.
2004-05-14 11:49:40 +00:00
libkern/arm/muldi3.c standard
libkern/ashldi3.c standard
libkern/ashrdi3.c standard
libkern/divdi3.c standard
libkern/ffsl.c standard
Add libkern ffsll() for parity with flsll() Sponsored by: EMC / Isilon Storage Division Differential Revision: https://reviews.freebsd.org/D3962
2015-10-22 20:28:37 +00:00
libkern/ffsll.c standard
fls was missing MFC after: 1 week
2006-11-30 06:17:54 +00:00
libkern/fls.c standard
Add config magic for arm.
2004-05-14 11:49:40 +00:00
libkern/flsl.c standard
provide fast versions of ffsl and flsl for i386; ffsll and flsll for amd64 Reviewed by: jhb MFC after: 10 days X-MFC note: consider thirdparty modules depending on these symbols Sponsored by: HybridCluster
2014-02-14 15:18:37 +00:00
libkern/flsll.c standard
Add config magic for arm.
2004-05-14 11:49:40 +00:00
libkern/lshrdi3.c standard
libkern/moddi3.c standard
libkern/qdivrem.c standard
Add libkern/ucmpdi2.c
2011-10-26 19:07:36 +00:00
libkern/ucmpdi2.c standard
Add config magic for arm.
2004-05-14 11:49:40 +00:00
libkern/udivdi3.c standard
libkern/umoddi3.c standard
Reference in New Issue Copy Permalink