freebsd-dev/sys/dev/dpaa/if_dtsec_rm.c

659 lines
15 KiB
C
Raw Normal View History

Add support for the Freescale dTSEC DPAA-based ethernet controller. Freescale's QorIQ line includes a new ethernet controller, based on their Datapath Acceleration Architecture (DPAA). This uses a combination of a Frame manager, Buffer manager, and Queue manager to improve performance across all interfaces by being able to pass data directly between hardware acceleration interfaces. As part of this import, Freescale's Netcomm Software (ncsw) driver is imported. This was an attempt by Freescale to create an OS-agnostic sub-driver for managing the hardware, using shims to interface to the OS-specific APIs. This work was abandoned, and Freescale's primary work is in the Linux driver (dual BSD/GPL license). Hence, this was imported directly to sys/contrib, rather than going through the vendor area. Going forward, FreeBSD-specific changes may be made to the ncsw code, diverging from the upstream in potentially incompatible ways. An alternative could be to import the Linux driver itself, using the linuxKPI layer, as that would maintain parity with the vendor-maintained driver. However, the Linux driver has not been evaluated for reliability yet, and may have issues with the import, whereas the ncsw-based driver in this commit was completed by Semihalf 4 years ago, and is very stable. Other SoC modules based on DPAA, which could be added in the future: * Security and Encryption engine (SEC4.x, SEC5.x) * RAID engine Additional work to be done: * Implement polling mode * Test vlan support * Add support for the Pattern Matching Engine, which can do regular expression matching on packets. This driver has been tested on the P5020 QorIQ SoC. Others listed in the dtsec(4) manual page are expected to work as the same DPAA engine is included in all. Obtained from: Semihalf Relnotes: Yes Sponsored by: Alex Perez/Inertial Computing
2016-02-29 03:38:00 +00:00
/*-
* Copyright (c) 2012 Semihalf.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*/
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/kernel.h>
#include <sys/module.h>
#include <sys/bus.h>
#include <sys/rman.h>
#include <sys/malloc.h>
#include <sys/mbuf.h>
#include <sys/socket.h>
#include <sys/sysctl.h>
#include <sys/sockio.h>
#include <net/ethernet.h>
#include <net/if.h>
#include <net/if_dl.h>
#include <net/if_media.h>
#include <net/if_types.h>
#include <net/if_arp.h>
#include <dev/mii/mii.h>
#include <dev/mii/miivar.h>
#include "miibus_if.h"
#include <contrib/ncsw/inc/integrations/dpaa_integration_ext.h>
#include <contrib/ncsw/inc/Peripherals/fm_ext.h>
Add support for the Freescale dTSEC DPAA-based ethernet controller. Freescale's QorIQ line includes a new ethernet controller, based on their Datapath Acceleration Architecture (DPAA). This uses a combination of a Frame manager, Buffer manager, and Queue manager to improve performance across all interfaces by being able to pass data directly between hardware acceleration interfaces. As part of this import, Freescale's Netcomm Software (ncsw) driver is imported. This was an attempt by Freescale to create an OS-agnostic sub-driver for managing the hardware, using shims to interface to the OS-specific APIs. This work was abandoned, and Freescale's primary work is in the Linux driver (dual BSD/GPL license). Hence, this was imported directly to sys/contrib, rather than going through the vendor area. Going forward, FreeBSD-specific changes may be made to the ncsw code, diverging from the upstream in potentially incompatible ways. An alternative could be to import the Linux driver itself, using the linuxKPI layer, as that would maintain parity with the vendor-maintained driver. However, the Linux driver has not been evaluated for reliability yet, and may have issues with the import, whereas the ncsw-based driver in this commit was completed by Semihalf 4 years ago, and is very stable. Other SoC modules based on DPAA, which could be added in the future: * Security and Encryption engine (SEC4.x, SEC5.x) * RAID engine Additional work to be done: * Implement polling mode * Test vlan support * Add support for the Pattern Matching Engine, which can do regular expression matching on packets. This driver has been tested on the P5020 QorIQ SoC. Others listed in the dtsec(4) manual page are expected to work as the same DPAA engine is included in all. Obtained from: Semihalf Relnotes: Yes Sponsored by: Alex Perez/Inertial Computing
2016-02-29 03:38:00 +00:00
#include <contrib/ncsw/inc/Peripherals/fm_mac_ext.h>
#include <contrib/ncsw/inc/Peripherals/fm_port_ext.h>
#include <contrib/ncsw/inc/xx_ext.h>
#include "fman.h"
#include "bman.h"
#include "qman.h"
#include "if_dtsec.h"
#include "if_dtsec_rm.h"
/**
* @group dTSEC RM private defines.
* @{
*/
#define DTSEC_BPOOLS_USED (1)
#define DTSEC_MAX_TX_QUEUE_LEN 256
struct dtsec_rm_frame_info {
struct mbuf *fi_mbuf;
t_DpaaSGTE fi_sgt[DPAA_NUM_OF_SG_TABLE_ENTRY];
};
enum dtsec_rm_pool_params {
DTSEC_RM_POOL_RX_LOW_MARK = 16,
DTSEC_RM_POOL_RX_HIGH_MARK = 64,
DTSEC_RM_POOL_RX_MAX_SIZE = 256,
DTSEC_RM_POOL_FI_LOW_MARK = 16,
DTSEC_RM_POOL_FI_HIGH_MARK = 64,
DTSEC_RM_POOL_FI_MAX_SIZE = 256,
};
enum dtsec_rm_fqr_params {
DTSEC_RM_FQR_RX_CHANNEL = e_QM_FQ_CHANNEL_POOL1,
DTSEC_RM_FQR_RX_WQ = 1,
DTSEC_RM_FQR_TX_CONF_CHANNEL = e_QM_FQ_CHANNEL_SWPORTAL0,
DTSEC_RM_FQR_TX_WQ = 1,
DTSEC_RM_FQR_TX_CONF_WQ = 1
};
/** @} */
/**
* @group dTSEC Frame Info routines.
* @{
*/
void
dtsec_rm_fi_pool_free(struct dtsec_softc *sc)
{
if (sc->sc_fi_zone != NULL)
uma_zdestroy(sc->sc_fi_zone);
}
int
dtsec_rm_fi_pool_init(struct dtsec_softc *sc)
{
snprintf(sc->sc_fi_zname, sizeof(sc->sc_fi_zname), "%s: Frame Info",
device_get_nameunit(sc->sc_dev));
sc->sc_fi_zone = uma_zcreate(sc->sc_fi_zname,
sizeof(struct dtsec_rm_frame_info), NULL, NULL, NULL, NULL,
UMA_ALIGN_PTR, 0);
Add support for the Freescale dTSEC DPAA-based ethernet controller. Freescale's QorIQ line includes a new ethernet controller, based on their Datapath Acceleration Architecture (DPAA). This uses a combination of a Frame manager, Buffer manager, and Queue manager to improve performance across all interfaces by being able to pass data directly between hardware acceleration interfaces. As part of this import, Freescale's Netcomm Software (ncsw) driver is imported. This was an attempt by Freescale to create an OS-agnostic sub-driver for managing the hardware, using shims to interface to the OS-specific APIs. This work was abandoned, and Freescale's primary work is in the Linux driver (dual BSD/GPL license). Hence, this was imported directly to sys/contrib, rather than going through the vendor area. Going forward, FreeBSD-specific changes may be made to the ncsw code, diverging from the upstream in potentially incompatible ways. An alternative could be to import the Linux driver itself, using the linuxKPI layer, as that would maintain parity with the vendor-maintained driver. However, the Linux driver has not been evaluated for reliability yet, and may have issues with the import, whereas the ncsw-based driver in this commit was completed by Semihalf 4 years ago, and is very stable. Other SoC modules based on DPAA, which could be added in the future: * Security and Encryption engine (SEC4.x, SEC5.x) * RAID engine Additional work to be done: * Implement polling mode * Test vlan support * Add support for the Pattern Matching Engine, which can do regular expression matching on packets. This driver has been tested on the P5020 QorIQ SoC. Others listed in the dtsec(4) manual page are expected to work as the same DPAA engine is included in all. Obtained from: Semihalf Relnotes: Yes Sponsored by: Alex Perez/Inertial Computing
2016-02-29 03:38:00 +00:00
if (sc->sc_fi_zone == NULL)
return (EIO);
return (0);
}
static struct dtsec_rm_frame_info *
dtsec_rm_fi_alloc(struct dtsec_softc *sc)
{
struct dtsec_rm_frame_info *fi;
fi = uma_zalloc(sc->sc_fi_zone, M_NOWAIT);
return (fi);
}
static void
dtsec_rm_fi_free(struct dtsec_softc *sc, struct dtsec_rm_frame_info *fi)
{
uma_zfree(sc->sc_fi_zone, fi);
}
/** @} */
/**
* @group dTSEC FMan PORT routines.
* @{
*/
int
dtsec_rm_fm_port_rx_init(struct dtsec_softc *sc, int unit)
{
t_FmPortParams params;
t_FmPortRxParams *rx_params;
t_FmExtPools *pool_params;
Add support for the Freescale dTSEC DPAA-based ethernet controller. Freescale's QorIQ line includes a new ethernet controller, based on their Datapath Acceleration Architecture (DPAA). This uses a combination of a Frame manager, Buffer manager, and Queue manager to improve performance across all interfaces by being able to pass data directly between hardware acceleration interfaces. As part of this import, Freescale's Netcomm Software (ncsw) driver is imported. This was an attempt by Freescale to create an OS-agnostic sub-driver for managing the hardware, using shims to interface to the OS-specific APIs. This work was abandoned, and Freescale's primary work is in the Linux driver (dual BSD/GPL license). Hence, this was imported directly to sys/contrib, rather than going through the vendor area. Going forward, FreeBSD-specific changes may be made to the ncsw code, diverging from the upstream in potentially incompatible ways. An alternative could be to import the Linux driver itself, using the linuxKPI layer, as that would maintain parity with the vendor-maintained driver. However, the Linux driver has not been evaluated for reliability yet, and may have issues with the import, whereas the ncsw-based driver in this commit was completed by Semihalf 4 years ago, and is very stable. Other SoC modules based on DPAA, which could be added in the future: * Security and Encryption engine (SEC4.x, SEC5.x) * RAID engine Additional work to be done: * Implement polling mode * Test vlan support * Add support for the Pattern Matching Engine, which can do regular expression matching on packets. This driver has been tested on the P5020 QorIQ SoC. Others listed in the dtsec(4) manual page are expected to work as the same DPAA engine is included in all. Obtained from: Semihalf Relnotes: Yes Sponsored by: Alex Perez/Inertial Computing
2016-02-29 03:38:00 +00:00
t_Error error;
memset(&params, 0, sizeof(params));
params.baseAddr = sc->sc_fm_base + sc->sc_port_rx_hw_id;
params.h_Fm = sc->sc_fmh;
params.portType = dtsec_fm_port_rx_type(sc->sc_eth_dev_type);
params.portId = sc->sc_eth_id;
params.independentModeEnable = false;
Add support for the Freescale dTSEC DPAA-based ethernet controller. Freescale's QorIQ line includes a new ethernet controller, based on their Datapath Acceleration Architecture (DPAA). This uses a combination of a Frame manager, Buffer manager, and Queue manager to improve performance across all interfaces by being able to pass data directly between hardware acceleration interfaces. As part of this import, Freescale's Netcomm Software (ncsw) driver is imported. This was an attempt by Freescale to create an OS-agnostic sub-driver for managing the hardware, using shims to interface to the OS-specific APIs. This work was abandoned, and Freescale's primary work is in the Linux driver (dual BSD/GPL license). Hence, this was imported directly to sys/contrib, rather than going through the vendor area. Going forward, FreeBSD-specific changes may be made to the ncsw code, diverging from the upstream in potentially incompatible ways. An alternative could be to import the Linux driver itself, using the linuxKPI layer, as that would maintain parity with the vendor-maintained driver. However, the Linux driver has not been evaluated for reliability yet, and may have issues with the import, whereas the ncsw-based driver in this commit was completed by Semihalf 4 years ago, and is very stable. Other SoC modules based on DPAA, which could be added in the future: * Security and Encryption engine (SEC4.x, SEC5.x) * RAID engine Additional work to be done: * Implement polling mode * Test vlan support * Add support for the Pattern Matching Engine, which can do regular expression matching on packets. This driver has been tested on the P5020 QorIQ SoC. Others listed in the dtsec(4) manual page are expected to work as the same DPAA engine is included in all. Obtained from: Semihalf Relnotes: Yes Sponsored by: Alex Perez/Inertial Computing
2016-02-29 03:38:00 +00:00
params.liodnBase = FM_PORT_LIODN_BASE;
params.f_Exception = dtsec_fm_port_rx_exception_callback;
params.h_App = sc;
rx_params = &params.specificParams.rxParams;
rx_params->errFqid = sc->sc_rx_fqid;
rx_params->dfltFqid = sc->sc_rx_fqid;
rx_params->liodnOffset = 0;
pool_params = &rx_params->extBufPools;
pool_params->numOfPoolsUsed = DTSEC_BPOOLS_USED;
pool_params->extBufPool->id = sc->sc_rx_bpid;
pool_params->extBufPool->size = FM_PORT_BUFFER_SIZE;
sc->sc_rxph = FM_PORT_Config(&params);
if (sc->sc_rxph == NULL) {
device_printf(sc->sc_dev, "couldn't configure FM Port RX.\n");
return (ENXIO);
}
error = FM_PORT_Init(sc->sc_rxph);
if (error != E_OK) {
device_printf(sc->sc_dev, "couldn't initialize FM Port RX.\n");
FM_PORT_Free(sc->sc_rxph);
return (ENXIO);
}
if (bootverbose)
device_printf(sc->sc_dev, "RX hw port 0x%02x initialized.\n",
sc->sc_port_rx_hw_id);
return (0);
}
int
dtsec_rm_fm_port_tx_init(struct dtsec_softc *sc, int unit)
{
t_FmPortParams params;
t_FmPortNonRxParams *tx_params;
t_Error error;
memset(&params, 0, sizeof(params));
params.baseAddr = sc->sc_fm_base + sc->sc_port_tx_hw_id;
params.h_Fm = sc->sc_fmh;
params.portType = dtsec_fm_port_tx_type(sc->sc_eth_dev_type);
params.portId = sc->sc_eth_id;
params.independentModeEnable = false;
Add support for the Freescale dTSEC DPAA-based ethernet controller. Freescale's QorIQ line includes a new ethernet controller, based on their Datapath Acceleration Architecture (DPAA). This uses a combination of a Frame manager, Buffer manager, and Queue manager to improve performance across all interfaces by being able to pass data directly between hardware acceleration interfaces. As part of this import, Freescale's Netcomm Software (ncsw) driver is imported. This was an attempt by Freescale to create an OS-agnostic sub-driver for managing the hardware, using shims to interface to the OS-specific APIs. This work was abandoned, and Freescale's primary work is in the Linux driver (dual BSD/GPL license). Hence, this was imported directly to sys/contrib, rather than going through the vendor area. Going forward, FreeBSD-specific changes may be made to the ncsw code, diverging from the upstream in potentially incompatible ways. An alternative could be to import the Linux driver itself, using the linuxKPI layer, as that would maintain parity with the vendor-maintained driver. However, the Linux driver has not been evaluated for reliability yet, and may have issues with the import, whereas the ncsw-based driver in this commit was completed by Semihalf 4 years ago, and is very stable. Other SoC modules based on DPAA, which could be added in the future: * Security and Encryption engine (SEC4.x, SEC5.x) * RAID engine Additional work to be done: * Implement polling mode * Test vlan support * Add support for the Pattern Matching Engine, which can do regular expression matching on packets. This driver has been tested on the P5020 QorIQ SoC. Others listed in the dtsec(4) manual page are expected to work as the same DPAA engine is included in all. Obtained from: Semihalf Relnotes: Yes Sponsored by: Alex Perez/Inertial Computing
2016-02-29 03:38:00 +00:00
params.liodnBase = FM_PORT_LIODN_BASE;
params.f_Exception = dtsec_fm_port_tx_exception_callback;
params.h_App = sc;
tx_params = &params.specificParams.nonRxParams;
tx_params->errFqid = sc->sc_tx_conf_fqid;
tx_params->dfltFqid = sc->sc_tx_conf_fqid;
tx_params->qmChannel = sc->sc_port_tx_qman_chan;
#ifdef FM_OP_PARTITION_ERRATA_FMANx8
tx_params->opLiodnOffset = 0;
#endif
sc->sc_txph = FM_PORT_Config(&params);
if (sc->sc_txph == NULL) {
device_printf(sc->sc_dev, "couldn't configure FM Port TX.\n");
return (ENXIO);
}
error = FM_PORT_Init(sc->sc_txph);
if (error != E_OK) {
device_printf(sc->sc_dev, "couldn't initialize FM Port TX.\n");
FM_PORT_Free(sc->sc_txph);
return (ENXIO);
}
if (bootverbose)
device_printf(sc->sc_dev, "TX hw port 0x%02x initialized.\n",
sc->sc_port_tx_hw_id);
return (0);
}
/** @} */
/**
* @group dTSEC buffer pools routines.
* @{
*/
static t_Error
dtsec_rm_pool_rx_put_buffer(t_Handle h_BufferPool, uint8_t *buffer,
t_Handle context)
{
struct dtsec_softc *sc;
sc = h_BufferPool;
uma_zfree(sc->sc_rx_zone, buffer);
return (E_OK);
}
static uint8_t *
dtsec_rm_pool_rx_get_buffer(t_Handle h_BufferPool, t_Handle *context)
{
struct dtsec_softc *sc;
uint8_t *buffer;
sc = h_BufferPool;
buffer = uma_zalloc(sc->sc_rx_zone, M_NOWAIT);
return (buffer);
}
static void
dtsec_rm_pool_rx_depleted(t_Handle h_App, bool in)
{
struct dtsec_softc *sc;
unsigned int count;
sc = h_App;
if (!in)
return;
while (1) {
count = bman_count(sc->sc_rx_pool);
if (count > DTSEC_RM_POOL_RX_HIGH_MARK)
return;
bman_pool_fill(sc->sc_rx_pool, DTSEC_RM_POOL_RX_HIGH_MARK);
}
}
void
dtsec_rm_pool_rx_free(struct dtsec_softc *sc)
{
if (sc->sc_rx_pool != NULL)
bman_pool_destroy(sc->sc_rx_pool);
if (sc->sc_rx_zone != NULL)
uma_zdestroy(sc->sc_rx_zone);
}
int
dtsec_rm_pool_rx_init(struct dtsec_softc *sc)
{
/* FM_PORT_BUFFER_SIZE must be less than PAGE_SIZE */
CTASSERT(FM_PORT_BUFFER_SIZE < PAGE_SIZE);
snprintf(sc->sc_rx_zname, sizeof(sc->sc_rx_zname), "%s: RX Buffers",
device_get_nameunit(sc->sc_dev));
sc->sc_rx_zone = uma_zcreate(sc->sc_rx_zname, FM_PORT_BUFFER_SIZE, NULL,
NULL, NULL, NULL, FM_PORT_BUFFER_SIZE - 1, 0);
Add support for the Freescale dTSEC DPAA-based ethernet controller. Freescale's QorIQ line includes a new ethernet controller, based on their Datapath Acceleration Architecture (DPAA). This uses a combination of a Frame manager, Buffer manager, and Queue manager to improve performance across all interfaces by being able to pass data directly between hardware acceleration interfaces. As part of this import, Freescale's Netcomm Software (ncsw) driver is imported. This was an attempt by Freescale to create an OS-agnostic sub-driver for managing the hardware, using shims to interface to the OS-specific APIs. This work was abandoned, and Freescale's primary work is in the Linux driver (dual BSD/GPL license). Hence, this was imported directly to sys/contrib, rather than going through the vendor area. Going forward, FreeBSD-specific changes may be made to the ncsw code, diverging from the upstream in potentially incompatible ways. An alternative could be to import the Linux driver itself, using the linuxKPI layer, as that would maintain parity with the vendor-maintained driver. However, the Linux driver has not been evaluated for reliability yet, and may have issues with the import, whereas the ncsw-based driver in this commit was completed by Semihalf 4 years ago, and is very stable. Other SoC modules based on DPAA, which could be added in the future: * Security and Encryption engine (SEC4.x, SEC5.x) * RAID engine Additional work to be done: * Implement polling mode * Test vlan support * Add support for the Pattern Matching Engine, which can do regular expression matching on packets. This driver has been tested on the P5020 QorIQ SoC. Others listed in the dtsec(4) manual page are expected to work as the same DPAA engine is included in all. Obtained from: Semihalf Relnotes: Yes Sponsored by: Alex Perez/Inertial Computing
2016-02-29 03:38:00 +00:00
if (sc->sc_rx_zone == NULL)
return (EIO);
sc->sc_rx_pool = bman_pool_create(&sc->sc_rx_bpid, FM_PORT_BUFFER_SIZE,
0, 0, DTSEC_RM_POOL_RX_MAX_SIZE, dtsec_rm_pool_rx_get_buffer,
dtsec_rm_pool_rx_put_buffer, DTSEC_RM_POOL_RX_LOW_MARK,
DTSEC_RM_POOL_RX_HIGH_MARK, 0, 0, dtsec_rm_pool_rx_depleted, sc, NULL,
NULL);
if (sc->sc_rx_pool == NULL) {
device_printf(sc->sc_dev, "NULL rx pool somehow\n");
Add support for the Freescale dTSEC DPAA-based ethernet controller. Freescale's QorIQ line includes a new ethernet controller, based on their Datapath Acceleration Architecture (DPAA). This uses a combination of a Frame manager, Buffer manager, and Queue manager to improve performance across all interfaces by being able to pass data directly between hardware acceleration interfaces. As part of this import, Freescale's Netcomm Software (ncsw) driver is imported. This was an attempt by Freescale to create an OS-agnostic sub-driver for managing the hardware, using shims to interface to the OS-specific APIs. This work was abandoned, and Freescale's primary work is in the Linux driver (dual BSD/GPL license). Hence, this was imported directly to sys/contrib, rather than going through the vendor area. Going forward, FreeBSD-specific changes may be made to the ncsw code, diverging from the upstream in potentially incompatible ways. An alternative could be to import the Linux driver itself, using the linuxKPI layer, as that would maintain parity with the vendor-maintained driver. However, the Linux driver has not been evaluated for reliability yet, and may have issues with the import, whereas the ncsw-based driver in this commit was completed by Semihalf 4 years ago, and is very stable. Other SoC modules based on DPAA, which could be added in the future: * Security and Encryption engine (SEC4.x, SEC5.x) * RAID engine Additional work to be done: * Implement polling mode * Test vlan support * Add support for the Pattern Matching Engine, which can do regular expression matching on packets. This driver has been tested on the P5020 QorIQ SoC. Others listed in the dtsec(4) manual page are expected to work as the same DPAA engine is included in all. Obtained from: Semihalf Relnotes: Yes Sponsored by: Alex Perez/Inertial Computing
2016-02-29 03:38:00 +00:00
dtsec_rm_pool_rx_free(sc);
return (EIO);
}
return (0);
}
/** @} */
/**
* @group dTSEC Frame Queue Range routines.
* @{
*/
static void
dtsec_rm_fqr_mext_free(struct mbuf *m)
Add support for the Freescale dTSEC DPAA-based ethernet controller. Freescale's QorIQ line includes a new ethernet controller, based on their Datapath Acceleration Architecture (DPAA). This uses a combination of a Frame manager, Buffer manager, and Queue manager to improve performance across all interfaces by being able to pass data directly between hardware acceleration interfaces. As part of this import, Freescale's Netcomm Software (ncsw) driver is imported. This was an attempt by Freescale to create an OS-agnostic sub-driver for managing the hardware, using shims to interface to the OS-specific APIs. This work was abandoned, and Freescale's primary work is in the Linux driver (dual BSD/GPL license). Hence, this was imported directly to sys/contrib, rather than going through the vendor area. Going forward, FreeBSD-specific changes may be made to the ncsw code, diverging from the upstream in potentially incompatible ways. An alternative could be to import the Linux driver itself, using the linuxKPI layer, as that would maintain parity with the vendor-maintained driver. However, the Linux driver has not been evaluated for reliability yet, and may have issues with the import, whereas the ncsw-based driver in this commit was completed by Semihalf 4 years ago, and is very stable. Other SoC modules based on DPAA, which could be added in the future: * Security and Encryption engine (SEC4.x, SEC5.x) * RAID engine Additional work to be done: * Implement polling mode * Test vlan support * Add support for the Pattern Matching Engine, which can do regular expression matching on packets. This driver has been tested on the P5020 QorIQ SoC. Others listed in the dtsec(4) manual page are expected to work as the same DPAA engine is included in all. Obtained from: Semihalf Relnotes: Yes Sponsored by: Alex Perez/Inertial Computing
2016-02-29 03:38:00 +00:00
{
struct dtsec_softc *sc;
void *buffer;
Add support for the Freescale dTSEC DPAA-based ethernet controller. Freescale's QorIQ line includes a new ethernet controller, based on their Datapath Acceleration Architecture (DPAA). This uses a combination of a Frame manager, Buffer manager, and Queue manager to improve performance across all interfaces by being able to pass data directly between hardware acceleration interfaces. As part of this import, Freescale's Netcomm Software (ncsw) driver is imported. This was an attempt by Freescale to create an OS-agnostic sub-driver for managing the hardware, using shims to interface to the OS-specific APIs. This work was abandoned, and Freescale's primary work is in the Linux driver (dual BSD/GPL license). Hence, this was imported directly to sys/contrib, rather than going through the vendor area. Going forward, FreeBSD-specific changes may be made to the ncsw code, diverging from the upstream in potentially incompatible ways. An alternative could be to import the Linux driver itself, using the linuxKPI layer, as that would maintain parity with the vendor-maintained driver. However, the Linux driver has not been evaluated for reliability yet, and may have issues with the import, whereas the ncsw-based driver in this commit was completed by Semihalf 4 years ago, and is very stable. Other SoC modules based on DPAA, which could be added in the future: * Security and Encryption engine (SEC4.x, SEC5.x) * RAID engine Additional work to be done: * Implement polling mode * Test vlan support * Add support for the Pattern Matching Engine, which can do regular expression matching on packets. This driver has been tested on the P5020 QorIQ SoC. Others listed in the dtsec(4) manual page are expected to work as the same DPAA engine is included in all. Obtained from: Semihalf Relnotes: Yes Sponsored by: Alex Perez/Inertial Computing
2016-02-29 03:38:00 +00:00
buffer = m->m_ext.ext_arg1;
sc = m->m_ext.ext_arg2;
Add support for the Freescale dTSEC DPAA-based ethernet controller. Freescale's QorIQ line includes a new ethernet controller, based on their Datapath Acceleration Architecture (DPAA). This uses a combination of a Frame manager, Buffer manager, and Queue manager to improve performance across all interfaces by being able to pass data directly between hardware acceleration interfaces. As part of this import, Freescale's Netcomm Software (ncsw) driver is imported. This was an attempt by Freescale to create an OS-agnostic sub-driver for managing the hardware, using shims to interface to the OS-specific APIs. This work was abandoned, and Freescale's primary work is in the Linux driver (dual BSD/GPL license). Hence, this was imported directly to sys/contrib, rather than going through the vendor area. Going forward, FreeBSD-specific changes may be made to the ncsw code, diverging from the upstream in potentially incompatible ways. An alternative could be to import the Linux driver itself, using the linuxKPI layer, as that would maintain parity with the vendor-maintained driver. However, the Linux driver has not been evaluated for reliability yet, and may have issues with the import, whereas the ncsw-based driver in this commit was completed by Semihalf 4 years ago, and is very stable. Other SoC modules based on DPAA, which could be added in the future: * Security and Encryption engine (SEC4.x, SEC5.x) * RAID engine Additional work to be done: * Implement polling mode * Test vlan support * Add support for the Pattern Matching Engine, which can do regular expression matching on packets. This driver has been tested on the P5020 QorIQ SoC. Others listed in the dtsec(4) manual page are expected to work as the same DPAA engine is included in all. Obtained from: Semihalf Relnotes: Yes Sponsored by: Alex Perez/Inertial Computing
2016-02-29 03:38:00 +00:00
if (bman_count(sc->sc_rx_pool) <= DTSEC_RM_POOL_RX_MAX_SIZE)
bman_put_buffer(sc->sc_rx_pool, buffer);
else
2017-10-12 21:26:52 +00:00
dtsec_rm_pool_rx_put_buffer(sc, buffer, NULL);
Add support for the Freescale dTSEC DPAA-based ethernet controller. Freescale's QorIQ line includes a new ethernet controller, based on their Datapath Acceleration Architecture (DPAA). This uses a combination of a Frame manager, Buffer manager, and Queue manager to improve performance across all interfaces by being able to pass data directly between hardware acceleration interfaces. As part of this import, Freescale's Netcomm Software (ncsw) driver is imported. This was an attempt by Freescale to create an OS-agnostic sub-driver for managing the hardware, using shims to interface to the OS-specific APIs. This work was abandoned, and Freescale's primary work is in the Linux driver (dual BSD/GPL license). Hence, this was imported directly to sys/contrib, rather than going through the vendor area. Going forward, FreeBSD-specific changes may be made to the ncsw code, diverging from the upstream in potentially incompatible ways. An alternative could be to import the Linux driver itself, using the linuxKPI layer, as that would maintain parity with the vendor-maintained driver. However, the Linux driver has not been evaluated for reliability yet, and may have issues with the import, whereas the ncsw-based driver in this commit was completed by Semihalf 4 years ago, and is very stable. Other SoC modules based on DPAA, which could be added in the future: * Security and Encryption engine (SEC4.x, SEC5.x) * RAID engine Additional work to be done: * Implement polling mode * Test vlan support * Add support for the Pattern Matching Engine, which can do regular expression matching on packets. This driver has been tested on the P5020 QorIQ SoC. Others listed in the dtsec(4) manual page are expected to work as the same DPAA engine is included in all. Obtained from: Semihalf Relnotes: Yes Sponsored by: Alex Perez/Inertial Computing
2016-02-29 03:38:00 +00:00
}
static e_RxStoreResponse
dtsec_rm_fqr_rx_callback(t_Handle app, t_Handle fqr, t_Handle portal,
uint32_t fqid_off, t_DpaaFD *frame)
{
struct dtsec_softc *sc;
struct mbuf *m;
void *frame_va;
Add support for the Freescale dTSEC DPAA-based ethernet controller. Freescale's QorIQ line includes a new ethernet controller, based on their Datapath Acceleration Architecture (DPAA). This uses a combination of a Frame manager, Buffer manager, and Queue manager to improve performance across all interfaces by being able to pass data directly between hardware acceleration interfaces. As part of this import, Freescale's Netcomm Software (ncsw) driver is imported. This was an attempt by Freescale to create an OS-agnostic sub-driver for managing the hardware, using shims to interface to the OS-specific APIs. This work was abandoned, and Freescale's primary work is in the Linux driver (dual BSD/GPL license). Hence, this was imported directly to sys/contrib, rather than going through the vendor area. Going forward, FreeBSD-specific changes may be made to the ncsw code, diverging from the upstream in potentially incompatible ways. An alternative could be to import the Linux driver itself, using the linuxKPI layer, as that would maintain parity with the vendor-maintained driver. However, the Linux driver has not been evaluated for reliability yet, and may have issues with the import, whereas the ncsw-based driver in this commit was completed by Semihalf 4 years ago, and is very stable. Other SoC modules based on DPAA, which could be added in the future: * Security and Encryption engine (SEC4.x, SEC5.x) * RAID engine Additional work to be done: * Implement polling mode * Test vlan support * Add support for the Pattern Matching Engine, which can do regular expression matching on packets. This driver has been tested on the P5020 QorIQ SoC. Others listed in the dtsec(4) manual page are expected to work as the same DPAA engine is included in all. Obtained from: Semihalf Relnotes: Yes Sponsored by: Alex Perez/Inertial Computing
2016-02-29 03:38:00 +00:00
m = NULL;
sc = app;
frame_va = DPAA_FD_GET_ADDR(frame);
Add support for the Freescale dTSEC DPAA-based ethernet controller. Freescale's QorIQ line includes a new ethernet controller, based on their Datapath Acceleration Architecture (DPAA). This uses a combination of a Frame manager, Buffer manager, and Queue manager to improve performance across all interfaces by being able to pass data directly between hardware acceleration interfaces. As part of this import, Freescale's Netcomm Software (ncsw) driver is imported. This was an attempt by Freescale to create an OS-agnostic sub-driver for managing the hardware, using shims to interface to the OS-specific APIs. This work was abandoned, and Freescale's primary work is in the Linux driver (dual BSD/GPL license). Hence, this was imported directly to sys/contrib, rather than going through the vendor area. Going forward, FreeBSD-specific changes may be made to the ncsw code, diverging from the upstream in potentially incompatible ways. An alternative could be to import the Linux driver itself, using the linuxKPI layer, as that would maintain parity with the vendor-maintained driver. However, the Linux driver has not been evaluated for reliability yet, and may have issues with the import, whereas the ncsw-based driver in this commit was completed by Semihalf 4 years ago, and is very stable. Other SoC modules based on DPAA, which could be added in the future: * Security and Encryption engine (SEC4.x, SEC5.x) * RAID engine Additional work to be done: * Implement polling mode * Test vlan support * Add support for the Pattern Matching Engine, which can do regular expression matching on packets. This driver has been tested on the P5020 QorIQ SoC. Others listed in the dtsec(4) manual page are expected to work as the same DPAA engine is included in all. Obtained from: Semihalf Relnotes: Yes Sponsored by: Alex Perez/Inertial Computing
2016-02-29 03:38:00 +00:00
KASSERT(DPAA_FD_GET_FORMAT(frame) == e_DPAA_FD_FORMAT_TYPE_SHORT_SBSF,
("%s(): Got unsupported frame format 0x%02X!", __func__,
DPAA_FD_GET_FORMAT(frame)));
KASSERT(DPAA_FD_GET_OFFSET(frame) == 0,
("%s(): Only offset 0 is supported!", __func__));
if (DPAA_FD_GET_STATUS(frame) != 0) {
device_printf(sc->sc_dev, "RX error: 0x%08X\n",
DPAA_FD_GET_STATUS(frame));
goto err;
}
m = m_gethdr(M_NOWAIT, MT_HEADER);
if (m == NULL)
goto err;
m_extadd(m, frame_va, FM_PORT_BUFFER_SIZE,
dtsec_rm_fqr_mext_free, frame_va, sc, 0,
Add support for the Freescale dTSEC DPAA-based ethernet controller. Freescale's QorIQ line includes a new ethernet controller, based on their Datapath Acceleration Architecture (DPAA). This uses a combination of a Frame manager, Buffer manager, and Queue manager to improve performance across all interfaces by being able to pass data directly between hardware acceleration interfaces. As part of this import, Freescale's Netcomm Software (ncsw) driver is imported. This was an attempt by Freescale to create an OS-agnostic sub-driver for managing the hardware, using shims to interface to the OS-specific APIs. This work was abandoned, and Freescale's primary work is in the Linux driver (dual BSD/GPL license). Hence, this was imported directly to sys/contrib, rather than going through the vendor area. Going forward, FreeBSD-specific changes may be made to the ncsw code, diverging from the upstream in potentially incompatible ways. An alternative could be to import the Linux driver itself, using the linuxKPI layer, as that would maintain parity with the vendor-maintained driver. However, the Linux driver has not been evaluated for reliability yet, and may have issues with the import, whereas the ncsw-based driver in this commit was completed by Semihalf 4 years ago, and is very stable. Other SoC modules based on DPAA, which could be added in the future: * Security and Encryption engine (SEC4.x, SEC5.x) * RAID engine Additional work to be done: * Implement polling mode * Test vlan support * Add support for the Pattern Matching Engine, which can do regular expression matching on packets. This driver has been tested on the P5020 QorIQ SoC. Others listed in the dtsec(4) manual page are expected to work as the same DPAA engine is included in all. Obtained from: Semihalf Relnotes: Yes Sponsored by: Alex Perez/Inertial Computing
2016-02-29 03:38:00 +00:00
EXT_NET_DRV);
m->m_pkthdr.rcvif = sc->sc_ifnet;
m->m_len = DPAA_FD_GET_LENGTH(frame);
m_fixhdr(m);
(*sc->sc_ifnet->if_input)(sc->sc_ifnet, m);
return (e_RX_STORE_RESPONSE_CONTINUE);
err:
bman_put_buffer(sc->sc_rx_pool, frame_va);
Add support for the Freescale dTSEC DPAA-based ethernet controller. Freescale's QorIQ line includes a new ethernet controller, based on their Datapath Acceleration Architecture (DPAA). This uses a combination of a Frame manager, Buffer manager, and Queue manager to improve performance across all interfaces by being able to pass data directly between hardware acceleration interfaces. As part of this import, Freescale's Netcomm Software (ncsw) driver is imported. This was an attempt by Freescale to create an OS-agnostic sub-driver for managing the hardware, using shims to interface to the OS-specific APIs. This work was abandoned, and Freescale's primary work is in the Linux driver (dual BSD/GPL license). Hence, this was imported directly to sys/contrib, rather than going through the vendor area. Going forward, FreeBSD-specific changes may be made to the ncsw code, diverging from the upstream in potentially incompatible ways. An alternative could be to import the Linux driver itself, using the linuxKPI layer, as that would maintain parity with the vendor-maintained driver. However, the Linux driver has not been evaluated for reliability yet, and may have issues with the import, whereas the ncsw-based driver in this commit was completed by Semihalf 4 years ago, and is very stable. Other SoC modules based on DPAA, which could be added in the future: * Security and Encryption engine (SEC4.x, SEC5.x) * RAID engine Additional work to be done: * Implement polling mode * Test vlan support * Add support for the Pattern Matching Engine, which can do regular expression matching on packets. This driver has been tested on the P5020 QorIQ SoC. Others listed in the dtsec(4) manual page are expected to work as the same DPAA engine is included in all. Obtained from: Semihalf Relnotes: Yes Sponsored by: Alex Perez/Inertial Computing
2016-02-29 03:38:00 +00:00
if (m != NULL)
m_freem(m);
return (e_RX_STORE_RESPONSE_CONTINUE);
}
static e_RxStoreResponse
dtsec_rm_fqr_tx_confirm_callback(t_Handle app, t_Handle fqr, t_Handle portal,
uint32_t fqid_off, t_DpaaFD *frame)
{
struct dtsec_rm_frame_info *fi;
struct dtsec_softc *sc;
unsigned int qlen;
t_DpaaSGTE *sgt0;
sc = app;
if (DPAA_FD_GET_STATUS(frame) != 0)
device_printf(sc->sc_dev, "TX error: 0x%08X\n",
DPAA_FD_GET_STATUS(frame));
/*
* We are storing struct dtsec_rm_frame_info in first entry
* of scatter-gather table.
*/
sgt0 = DPAA_FD_GET_ADDR(frame);
fi = DPAA_SGTE_GET_ADDR(sgt0);
/* Free transmitted frame */
m_freem(fi->fi_mbuf);
dtsec_rm_fi_free(sc, fi);
qlen = qman_fqr_get_counter(sc->sc_tx_conf_fqr, 0,
e_QM_FQR_COUNTERS_FRAME);
if (qlen == 0) {
DTSEC_LOCK(sc);
if (sc->sc_tx_fqr_full) {
sc->sc_tx_fqr_full = 0;
dtsec_rm_if_start_locked(sc);
}
DTSEC_UNLOCK(sc);
}
return (e_RX_STORE_RESPONSE_CONTINUE);
}
void
dtsec_rm_fqr_rx_free(struct dtsec_softc *sc)
{
if (sc->sc_rx_fqr)
qman_fqr_free(sc->sc_rx_fqr);
}
int
dtsec_rm_fqr_rx_init(struct dtsec_softc *sc)
{
t_Error error;
t_Handle fqr;
/* Default Frame Queue */
fqr = qman_fqr_create(1, DTSEC_RM_FQR_RX_CHANNEL, DTSEC_RM_FQR_RX_WQ,
false, 0, false, false, true, false, 0, 0, 0);
Add support for the Freescale dTSEC DPAA-based ethernet controller. Freescale's QorIQ line includes a new ethernet controller, based on their Datapath Acceleration Architecture (DPAA). This uses a combination of a Frame manager, Buffer manager, and Queue manager to improve performance across all interfaces by being able to pass data directly between hardware acceleration interfaces. As part of this import, Freescale's Netcomm Software (ncsw) driver is imported. This was an attempt by Freescale to create an OS-agnostic sub-driver for managing the hardware, using shims to interface to the OS-specific APIs. This work was abandoned, and Freescale's primary work is in the Linux driver (dual BSD/GPL license). Hence, this was imported directly to sys/contrib, rather than going through the vendor area. Going forward, FreeBSD-specific changes may be made to the ncsw code, diverging from the upstream in potentially incompatible ways. An alternative could be to import the Linux driver itself, using the linuxKPI layer, as that would maintain parity with the vendor-maintained driver. However, the Linux driver has not been evaluated for reliability yet, and may have issues with the import, whereas the ncsw-based driver in this commit was completed by Semihalf 4 years ago, and is very stable. Other SoC modules based on DPAA, which could be added in the future: * Security and Encryption engine (SEC4.x, SEC5.x) * RAID engine Additional work to be done: * Implement polling mode * Test vlan support * Add support for the Pattern Matching Engine, which can do regular expression matching on packets. This driver has been tested on the P5020 QorIQ SoC. Others listed in the dtsec(4) manual page are expected to work as the same DPAA engine is included in all. Obtained from: Semihalf Relnotes: Yes Sponsored by: Alex Perez/Inertial Computing
2016-02-29 03:38:00 +00:00
if (fqr == NULL) {
device_printf(sc->sc_dev, "could not create default RX queue"
"\n");
return (EIO);
}
sc->sc_rx_fqr = fqr;
sc->sc_rx_fqid = qman_fqr_get_base_fqid(fqr);
error = qman_fqr_register_cb(fqr, dtsec_rm_fqr_rx_callback, sc);
if (error != E_OK) {
device_printf(sc->sc_dev, "could not register RX callback\n");
dtsec_rm_fqr_rx_free(sc);
return (EIO);
}
return (0);
}
void
dtsec_rm_fqr_tx_free(struct dtsec_softc *sc)
{
if (sc->sc_tx_fqr)
qman_fqr_free(sc->sc_tx_fqr);
if (sc->sc_tx_conf_fqr)
qman_fqr_free(sc->sc_tx_conf_fqr);
}
int
dtsec_rm_fqr_tx_init(struct dtsec_softc *sc)
{
t_Error error;
t_Handle fqr;
/* TX Frame Queue */
fqr = qman_fqr_create(1, sc->sc_port_tx_qman_chan,
DTSEC_RM_FQR_TX_WQ, false, 0, false, false, true, false, 0, 0, 0);
Add support for the Freescale dTSEC DPAA-based ethernet controller. Freescale's QorIQ line includes a new ethernet controller, based on their Datapath Acceleration Architecture (DPAA). This uses a combination of a Frame manager, Buffer manager, and Queue manager to improve performance across all interfaces by being able to pass data directly between hardware acceleration interfaces. As part of this import, Freescale's Netcomm Software (ncsw) driver is imported. This was an attempt by Freescale to create an OS-agnostic sub-driver for managing the hardware, using shims to interface to the OS-specific APIs. This work was abandoned, and Freescale's primary work is in the Linux driver (dual BSD/GPL license). Hence, this was imported directly to sys/contrib, rather than going through the vendor area. Going forward, FreeBSD-specific changes may be made to the ncsw code, diverging from the upstream in potentially incompatible ways. An alternative could be to import the Linux driver itself, using the linuxKPI layer, as that would maintain parity with the vendor-maintained driver. However, the Linux driver has not been evaluated for reliability yet, and may have issues with the import, whereas the ncsw-based driver in this commit was completed by Semihalf 4 years ago, and is very stable. Other SoC modules based on DPAA, which could be added in the future: * Security and Encryption engine (SEC4.x, SEC5.x) * RAID engine Additional work to be done: * Implement polling mode * Test vlan support * Add support for the Pattern Matching Engine, which can do regular expression matching on packets. This driver has been tested on the P5020 QorIQ SoC. Others listed in the dtsec(4) manual page are expected to work as the same DPAA engine is included in all. Obtained from: Semihalf Relnotes: Yes Sponsored by: Alex Perez/Inertial Computing
2016-02-29 03:38:00 +00:00
if (fqr == NULL) {
device_printf(sc->sc_dev, "could not create default TX queue"
"\n");
return (EIO);
}
sc->sc_tx_fqr = fqr;
/* TX Confirmation Frame Queue */
fqr = qman_fqr_create(1, DTSEC_RM_FQR_TX_CONF_CHANNEL,
DTSEC_RM_FQR_TX_CONF_WQ, false, 0, false, false, true, false, 0, 0,
Add support for the Freescale dTSEC DPAA-based ethernet controller. Freescale's QorIQ line includes a new ethernet controller, based on their Datapath Acceleration Architecture (DPAA). This uses a combination of a Frame manager, Buffer manager, and Queue manager to improve performance across all interfaces by being able to pass data directly between hardware acceleration interfaces. As part of this import, Freescale's Netcomm Software (ncsw) driver is imported. This was an attempt by Freescale to create an OS-agnostic sub-driver for managing the hardware, using shims to interface to the OS-specific APIs. This work was abandoned, and Freescale's primary work is in the Linux driver (dual BSD/GPL license). Hence, this was imported directly to sys/contrib, rather than going through the vendor area. Going forward, FreeBSD-specific changes may be made to the ncsw code, diverging from the upstream in potentially incompatible ways. An alternative could be to import the Linux driver itself, using the linuxKPI layer, as that would maintain parity with the vendor-maintained driver. However, the Linux driver has not been evaluated for reliability yet, and may have issues with the import, whereas the ncsw-based driver in this commit was completed by Semihalf 4 years ago, and is very stable. Other SoC modules based on DPAA, which could be added in the future: * Security and Encryption engine (SEC4.x, SEC5.x) * RAID engine Additional work to be done: * Implement polling mode * Test vlan support * Add support for the Pattern Matching Engine, which can do regular expression matching on packets. This driver has been tested on the P5020 QorIQ SoC. Others listed in the dtsec(4) manual page are expected to work as the same DPAA engine is included in all. Obtained from: Semihalf Relnotes: Yes Sponsored by: Alex Perez/Inertial Computing
2016-02-29 03:38:00 +00:00
0);
if (fqr == NULL) {
device_printf(sc->sc_dev, "could not create TX confirmation "
"queue\n");
dtsec_rm_fqr_tx_free(sc);
return (EIO);
}
sc->sc_tx_conf_fqr = fqr;
sc->sc_tx_conf_fqid = qman_fqr_get_base_fqid(fqr);
error = qman_fqr_register_cb(fqr, dtsec_rm_fqr_tx_confirm_callback, sc);
if (error != E_OK) {
device_printf(sc->sc_dev, "could not register TX confirmation "
"callback\n");
dtsec_rm_fqr_tx_free(sc);
return (EIO);
}
return (0);
}
/** @} */
/**
* @group dTSEC IFnet routines.
* @{
*/
void
dtsec_rm_if_start_locked(struct dtsec_softc *sc)
{
vm_size_t dsize, psize, ssize;
struct dtsec_rm_frame_info *fi;
unsigned int qlen, i;
struct mbuf *m0, *m;
vm_offset_t vaddr;
t_DpaaFD fd;
DTSEC_LOCK_ASSERT(sc);
/* TODO: IFF_DRV_OACTIVE */
if ((sc->sc_mii->mii_media_status & IFM_ACTIVE) == 0)
return;
if ((sc->sc_ifnet->if_drv_flags & IFF_DRV_RUNNING) != IFF_DRV_RUNNING)
return;
while (!IFQ_DRV_IS_EMPTY(&sc->sc_ifnet->if_snd)) {
/* Check length of the TX queue */
qlen = qman_fqr_get_counter(sc->sc_tx_fqr, 0,
e_QM_FQR_COUNTERS_FRAME);
if (qlen >= DTSEC_MAX_TX_QUEUE_LEN) {
sc->sc_tx_fqr_full = 1;
return;
}
fi = dtsec_rm_fi_alloc(sc);
if (fi == NULL)
return;
IFQ_DRV_DEQUEUE(&sc->sc_ifnet->if_snd, m0);
if (m0 == NULL) {
dtsec_rm_fi_free(sc, fi);
return;
}
i = 0;
m = m0;
psize = 0;
dsize = 0;
fi->fi_mbuf = m0;
while (m && i < DPAA_NUM_OF_SG_TABLE_ENTRY) {
if (m->m_len == 0)
continue;
/*
* First entry in scatter-gather table is used to keep
* pointer to frame info structure.
*/
DPAA_SGTE_SET_ADDR(&fi->fi_sgt[i], (void *)fi);
DPAA_SGTE_SET_LENGTH(&fi->fi_sgt[i], 0);
DPAA_SGTE_SET_EXTENSION(&fi->fi_sgt[i], 0);
DPAA_SGTE_SET_FINAL(&fi->fi_sgt[i], 0);
DPAA_SGTE_SET_BPID(&fi->fi_sgt[i], 0);
DPAA_SGTE_SET_OFFSET(&fi->fi_sgt[i], 0);
i++;
dsize = m->m_len;
vaddr = (vm_offset_t)m->m_data;
while (dsize > 0 && i < DPAA_NUM_OF_SG_TABLE_ENTRY) {
ssize = PAGE_SIZE - (vaddr & PAGE_MASK);
Add support for the Freescale dTSEC DPAA-based ethernet controller. Freescale's QorIQ line includes a new ethernet controller, based on their Datapath Acceleration Architecture (DPAA). This uses a combination of a Frame manager, Buffer manager, and Queue manager to improve performance across all interfaces by being able to pass data directly between hardware acceleration interfaces. As part of this import, Freescale's Netcomm Software (ncsw) driver is imported. This was an attempt by Freescale to create an OS-agnostic sub-driver for managing the hardware, using shims to interface to the OS-specific APIs. This work was abandoned, and Freescale's primary work is in the Linux driver (dual BSD/GPL license). Hence, this was imported directly to sys/contrib, rather than going through the vendor area. Going forward, FreeBSD-specific changes may be made to the ncsw code, diverging from the upstream in potentially incompatible ways. An alternative could be to import the Linux driver itself, using the linuxKPI layer, as that would maintain parity with the vendor-maintained driver. However, the Linux driver has not been evaluated for reliability yet, and may have issues with the import, whereas the ncsw-based driver in this commit was completed by Semihalf 4 years ago, and is very stable. Other SoC modules based on DPAA, which could be added in the future: * Security and Encryption engine (SEC4.x, SEC5.x) * RAID engine Additional work to be done: * Implement polling mode * Test vlan support * Add support for the Pattern Matching Engine, which can do regular expression matching on packets. This driver has been tested on the P5020 QorIQ SoC. Others listed in the dtsec(4) manual page are expected to work as the same DPAA engine is included in all. Obtained from: Semihalf Relnotes: Yes Sponsored by: Alex Perez/Inertial Computing
2016-02-29 03:38:00 +00:00
if (m->m_len < ssize)
ssize = m->m_len;
DPAA_SGTE_SET_ADDR(&fi->fi_sgt[i],
(void *)vaddr);
DPAA_SGTE_SET_LENGTH(&fi->fi_sgt[i], ssize);
DPAA_SGTE_SET_EXTENSION(&fi->fi_sgt[i], 0);
DPAA_SGTE_SET_FINAL(&fi->fi_sgt[i], 0);
DPAA_SGTE_SET_BPID(&fi->fi_sgt[i], 0);
DPAA_SGTE_SET_OFFSET(&fi->fi_sgt[i], 0);
dsize -= ssize;
vaddr += ssize;
psize += ssize;
i++;
}
if (dsize > 0)
break;
m = m->m_next;
}
/* Check if SG table was constructed properly */
if (m != NULL || dsize != 0) {
dtsec_rm_fi_free(sc, fi);
m_freem(m0);
continue;
}
DPAA_SGTE_SET_FINAL(&fi->fi_sgt[i-1], 1);
DPAA_FD_SET_ADDR(&fd, fi->fi_sgt);
DPAA_FD_SET_LENGTH(&fd, psize);
DPAA_FD_SET_FORMAT(&fd, e_DPAA_FD_FORMAT_TYPE_SHORT_MBSF);
fd.liodn = 0;
fd.bpid = 0;
fd.elion = 0;
Add support for the Freescale dTSEC DPAA-based ethernet controller. Freescale's QorIQ line includes a new ethernet controller, based on their Datapath Acceleration Architecture (DPAA). This uses a combination of a Frame manager, Buffer manager, and Queue manager to improve performance across all interfaces by being able to pass data directly between hardware acceleration interfaces. As part of this import, Freescale's Netcomm Software (ncsw) driver is imported. This was an attempt by Freescale to create an OS-agnostic sub-driver for managing the hardware, using shims to interface to the OS-specific APIs. This work was abandoned, and Freescale's primary work is in the Linux driver (dual BSD/GPL license). Hence, this was imported directly to sys/contrib, rather than going through the vendor area. Going forward, FreeBSD-specific changes may be made to the ncsw code, diverging from the upstream in potentially incompatible ways. An alternative could be to import the Linux driver itself, using the linuxKPI layer, as that would maintain parity with the vendor-maintained driver. However, the Linux driver has not been evaluated for reliability yet, and may have issues with the import, whereas the ncsw-based driver in this commit was completed by Semihalf 4 years ago, and is very stable. Other SoC modules based on DPAA, which could be added in the future: * Security and Encryption engine (SEC4.x, SEC5.x) * RAID engine Additional work to be done: * Implement polling mode * Test vlan support * Add support for the Pattern Matching Engine, which can do regular expression matching on packets. This driver has been tested on the P5020 QorIQ SoC. Others listed in the dtsec(4) manual page are expected to work as the same DPAA engine is included in all. Obtained from: Semihalf Relnotes: Yes Sponsored by: Alex Perez/Inertial Computing
2016-02-29 03:38:00 +00:00
DPAA_FD_SET_OFFSET(&fd, 0);
DPAA_FD_SET_STATUS(&fd, 0);
DTSEC_UNLOCK(sc);
if (qman_fqr_enqueue(sc->sc_tx_fqr, 0, &fd) != E_OK) {
dtsec_rm_fi_free(sc, fi);
m_freem(m0);
}
DTSEC_LOCK(sc);
}
}
/** @} */