d/freebsd-dev
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
ad10496cf4
freebsd-dev/sys/arm/freescale/imx/files.imx5

55 lines
1.3 KiB
Plaintext
Raw Normal View History

Initial support for the Digi ConnectCore(c) i.MX53 / Wi-i.MX53 boards. There are many drivers missing, but we can reach single user mode now. Hardware graciously donated by Douglas Beattie.
2013-09-01 20:15:35 +00:00
# $FreeBSD$
kern/kern_clocksource.c standard
# Init
Move all the files named foo/common.c to foo/foo_common.c, as appropriate for each of the 'foo' in the tree. This will allow us to compile them together (although symbol conflicts prevent us from doing that today, this just fixes the file name collision).
2014-03-08 00:14:40 +00:00
arm/freescale/imx/imx_common.c standard
Maximize available kva space by doing static device mapping from the top of the address space downwards, and then returning the lowest mapped device address from initarm_lastaddr(). This adds over 500MB of kva space compared to the old way of hardcoding the end address as 0xE0000000. Also, pre-map most of the SoC's common memory-mapped devices using 1MB section mappings so that all device access uses just a few TLB entries. Graphics devices aren't mapped this way yet, but probably should be. To provide this new functionality without pasting identical code into multiple imxNN_machdep.c files, rework the imx machdep code so that things common to the whole family of SoCs are in a new imx_machdep.c file. The rewritten imxNN_machdep.c files contain just things specific to an individual SoC.
2013-10-26 23:13:20 +00:00
arm/freescale/imx/imx_machdep.c standard
Add the SOC_IMX51, SOC_IMX53, and SOC_IMX6 options. These are used to select which SoCs the kernel config will support. Use these options to merge files.imx51 and files.imx53.
2015-04-23 22:20:43 +00:00
arm/freescale/imx/imx51_machdep.c optional soc_imx51
arm/freescale/imx/imx53_machdep.c optional soc_imx53
Initial support for the Digi ConnectCore(c) i.MX53 / Wi-i.MX53 boards. There are many drivers missing, but we can reach single user mode now. Hardware graciously donated by Douglas Beattie.
2013-09-01 20:15:35 +00:00
Switch to using the standard uart console driver instead of the special driver for early boot debugging.
2013-10-20 21:03:15 +00:00
# Special serial console for debuging early boot code
Start to rename files with common or generic names to be SoC specific. The build system doesn't handle two files with the same name.
2017-06-04 09:11:14 +00:00
#arm/freescale/imx/imx_console.c standard
Switch to using the standard uart console driver instead of the special driver for early boot debugging.
2013-10-20 21:03:15 +00:00
# UART driver (includes serial console support)
Reduce the diff between files.imx51 and files.imx53
2015-04-23 21:39:32 +00:00
dev/uart/uart_dev_imx.c optional uart
Initial support for the Digi ConnectCore(c) i.MX53 / Wi-i.MX53 boards. There are many drivers missing, but we can reach single user mode now. Hardware graciously donated by Douglas Beattie.
2013-09-01 20:15:35 +00:00
# TrustZone Interrupt Controller
arm/freescale/imx/tzic.c standard
# IOMUX - external pins multiplexor
Replace the imx5 and imx6 iomux drivers with a single common driver that uses the new fdt_pinctrl interface.
2014-09-13 20:09:34 +00:00
arm/freescale/imx/imx_iomux.c standard
Initial support for the Digi ConnectCore(c) i.MX53 / Wi-i.MX53 boards. There are many drivers missing, but we can reach single user mode now. Hardware graciously donated by Douglas Beattie.
2013-09-01 20:15:35 +00:00
# GPIO
Rename gpio driver file.
2014-07-18 07:52:35 +00:00
arm/freescale/imx/imx_gpio.c optional gpio
Initial support for the Digi ConnectCore(c) i.MX53 / Wi-i.MX53 boards. There are many drivers missing, but we can reach single user mode now. Hardware graciously donated by Douglas Beattie.
2013-09-01 20:15:35 +00:00
# Generic Periodic Timer
arm/freescale/imx/imx_gpt.c standard
# Clock Configuration Manager
arm/freescale/imx/imx51_ccm.c standard
# i.MX5xx PATA controller
dev/ata/chipsets/ata-fsl.c optional imxata
Updates to i.MX53: * Define support for the SDHCI driver, although it doesn't work yet * Fix the memory mappings for IPU [1] Reviewed by: ray [1]
2014-04-08 04:05:04 +00:00
# SDHCI/MMC
Move imx_sdhci driver over to a dev/sdhci in preparation for QorIQ support. Freescale uses eSDHC in both i.MX (ARM) and QorIQ (PowerPC), with slight differences. This is part one in unifying the drivers. Reviewed by: imp
2016-11-02 00:51:09 +00:00
dev/sdhci/fsl_sdhci.c optional sdhci
Updates to i.MX53: * Define support for the SDHCI driver, although it doesn't work yet * Fix the memory mappings for IPU [1] Reviewed by: ray [1]
2014-04-08 04:05:04 +00:00
Add a "no-op" USB PHY driver for imx-family SoCs. This is used when the phy clocks need to be enabled, but no other hardware setup is needed to make the phy work.
2013-10-30 14:38:24 +00:00
# USB OH3 controller (1 OTG, 3 EHCI)
arm/freescale/imx/imx_nop_usbphy.c optional ehci
Initial support for the Digi ConnectCore(c) i.MX53 / Wi-i.MX53 boards. There are many drivers missing, but we can reach single user mode now. Hardware graciously donated by Douglas Beattie.
2013-09-01 20:15:35 +00:00
dev/usb/controller/ehci_imx.c optional ehci
# Watchdog
arm/freescale/imx/imx_wdog.c optional imxwdt
# i2c
Rename i.MX I2C driver file.
2014-07-22 03:59:14 +00:00
arm/freescale/imx/imx_i2c.c optional fsliic
Initial support for the Digi ConnectCore(c) i.MX53 / Wi-i.MX53 boards. There are many drivers missing, but we can reach single user mode now. Hardware graciously donated by Douglas Beattie.
2013-09-01 20:15:35 +00:00
# IPU - Image Processing Unit (frame buffer also)
arm/freescale/imx/imx51_ipuv3.c optional sc
Follow files.imx51 and add vt support.
2014-04-05 23:16:51 +00:00
arm/freescale/imx/imx51_ipuv3_fbd.c optional vt
dev/vt/hw/fb/vt_early_fb.c optional vt
Initial support for the Digi ConnectCore(c) i.MX53 / Wi-i.MX53 boards. There are many drivers missing, but we can reach single user mode now. Hardware graciously donated by Douglas Beattie.
2013-09-01 20:15:35 +00:00
Add a driver for the Freescale Fast Ethernet Controller found on various Freescale SoCs including the i.MX series. This also works for the newer SoCs with the ENET gigabit controller, but doesn't use any of the new hardware features other than enabling gigabit speed.
2013-10-20 21:07:38 +00:00
# Fast Ethernet Controller
dev/ffec/if_ffec.c optional ffec
Reference in New Issue Copy Permalink