freebsd-dev/sys/powerpc/booke/mp_cpudep.c

98 lines
2.6 KiB
C
Raw Normal View History

/*-
* SPDX-License-Identifier: BSD-2-Clause-FreeBSD
*
* Copyright (c) 2008-2009 Semihalf, Rafal Jaworowski
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/kernel.h>
#include <sys/bus.h>
#include <sys/pcpu.h>
#include <sys/proc.h>
#include <sys/smp.h>
#include <machine/pcb.h>
#include <machine/psl.h>
#include <machine/smp.h>
#include <machine/spr.h>
extern void dcache_enable(void);
extern void dcache_inval(void);
extern void icache_enable(void);
extern void icache_inval(void);
volatile void *ap_pcpu;
uintptr_t
cpudep_ap_bootstrap()
{
Introduce 64-bit PowerPC Book-E support Extend the Book-E pmap to support 64-bit operation. Much of this was taken from Juniper's Junos FreeBSD port. It uses a 3-level page table (page directory list -- PP2D, page directory, page table), but has gaps in the page directory list where regions will repeat, due to the design of the PP2D hash (a 20-bit gap between the two parts of the index). In practice this may not be a problem given the expanded address space. However, an alternative to this would be to use a 4-level page table, like Linux, and possibly reduce the available address space; Linux appears to use a 46-bit address space. Alternatively, a cache of page directory pointers could be used to keep the overall design as-is, but remove the gaps in the address space. This includes a new kernel config for 64-bit QorIQ SoCs, based on MPC85XX, with the following notes: * The DPAA driver has not yet been ported to 64-bit so is not included in the kernel config. * This has been tested on the AmigaOne X5000, using a MD_ROOT compiled in (total size kernel+mdroot must be under 64MB). * This can run both 32-bit and 64-bit processes, and has even been tested to run a 32-bit init with 64-bit children. Many thanks to stevek and marcel for getting Juniper's FreeBSD patches open sourced to be used here, and to stevek for reviewing, and providing some historical contexts on quirks of the code. Reviewed by: stevek Obtained from: Juniper (in part) MFC after: 2 months Relnotes: yes Differential Revision: https://reviews.freebsd.org/D9433
2017-03-17 21:40:14 +00:00
uint32_t msr, csr;
uintptr_t sp;
/* Enable L1 caches */
csr = mfspr(SPR_L1CSR0);
if ((csr & L1CSR0_DCE) == 0) {
dcache_inval();
dcache_enable();
}
csr = mfspr(SPR_L1CSR1);
if ((csr & L1CSR1_ICE) == 0) {
icache_inval();
icache_enable();
}
/* Set MSR */
Introduce 64-bit PowerPC Book-E support Extend the Book-E pmap to support 64-bit operation. Much of this was taken from Juniper's Junos FreeBSD port. It uses a 3-level page table (page directory list -- PP2D, page directory, page table), but has gaps in the page directory list where regions will repeat, due to the design of the PP2D hash (a 20-bit gap between the two parts of the index). In practice this may not be a problem given the expanded address space. However, an alternative to this would be to use a 4-level page table, like Linux, and possibly reduce the available address space; Linux appears to use a 46-bit address space. Alternatively, a cache of page directory pointers could be used to keep the overall design as-is, but remove the gaps in the address space. This includes a new kernel config for 64-bit QorIQ SoCs, based on MPC85XX, with the following notes: * The DPAA driver has not yet been ported to 64-bit so is not included in the kernel config. * This has been tested on the AmigaOne X5000, using a MD_ROOT compiled in (total size kernel+mdroot must be under 64MB). * This can run both 32-bit and 64-bit processes, and has even been tested to run a 32-bit init with 64-bit children. Many thanks to stevek and marcel for getting Juniper's FreeBSD patches open sourced to be used here, and to stevek for reviewing, and providing some historical contexts on quirks of the code. Reviewed by: stevek Obtained from: Juniper (in part) MFC after: 2 months Relnotes: yes Differential Revision: https://reviews.freebsd.org/D9433
2017-03-17 21:40:14 +00:00
#ifdef __powerpc64__
msr = PSL_CM | PSL_ME;
#else
msr = PSL_ME;
Introduce 64-bit PowerPC Book-E support Extend the Book-E pmap to support 64-bit operation. Much of this was taken from Juniper's Junos FreeBSD port. It uses a 3-level page table (page directory list -- PP2D, page directory, page table), but has gaps in the page directory list where regions will repeat, due to the design of the PP2D hash (a 20-bit gap between the two parts of the index). In practice this may not be a problem given the expanded address space. However, an alternative to this would be to use a 4-level page table, like Linux, and possibly reduce the available address space; Linux appears to use a 46-bit address space. Alternatively, a cache of page directory pointers could be used to keep the overall design as-is, but remove the gaps in the address space. This includes a new kernel config for 64-bit QorIQ SoCs, based on MPC85XX, with the following notes: * The DPAA driver has not yet been ported to 64-bit so is not included in the kernel config. * This has been tested on the AmigaOne X5000, using a MD_ROOT compiled in (total size kernel+mdroot must be under 64MB). * This can run both 32-bit and 64-bit processes, and has even been tested to run a 32-bit init with 64-bit children. Many thanks to stevek and marcel for getting Juniper's FreeBSD patches open sourced to be used here, and to stevek for reviewing, and providing some historical contexts on quirks of the code. Reviewed by: stevek Obtained from: Juniper (in part) MFC after: 2 months Relnotes: yes Differential Revision: https://reviews.freebsd.org/D9433
2017-03-17 21:40:14 +00:00
#endif
mtmsr(msr);
/* Assign pcpu fields, return ptr to this AP's idle thread kstack */
pcpup->pc_curthread = pcpup->pc_idlethread;
#ifdef __powerpc64__
__asm __volatile("mr 13,%0" :: "r"(pcpup->pc_curthread));
#else
__asm __volatile("mr 2,%0" :: "r"(pcpup->pc_curthread));
#endif
pcpup->pc_curpcb = pcpup->pc_curthread->td_pcb;
sp = pcpup->pc_curpcb->pcb_sp;
/* XXX shouldn't the pcb_sp be checked/forced for alignment here?? */
return (sp);
}
void
cpudep_ap_setup()
{
}