2012-01-26 18:17:21 +00:00
|
|
|
/*-
|
Bring in LSI's latest mps(4) 6Gb SAS and WarpDrive driver, version
14.00.00.01-fbsd.
Their description of the changes is as follows:
1. Copyright contents has been changed in all respective .c
and .h files
2. Support for WRITE12 and READ12 for direct-io (warpdrive only)
has been added.
3. Driver has added checks to see if Drive has READ_CAP_16
support before sending it down to the device.
If SPC3_SID_PROTECT flag is set in the inquiry data, the
device supports protection information, and must support
the 16 byte read capacity command, otherwise continue without
sending read cap 16. This will optimize driver performance,
since it will not send READ_CAP_16 to the drive which does
not have support of READ_CAP_16.
4. With new approach, "MPTIOCTL_RESET_ADAPTER" IOCTL will not
use DELAY() which is busy loop implementation.
It will use <msleep> (Better way to sleep without busy
loop). Also from the HBA reset code path and some other
places, DELAY() is replaced with msleep() or "pause()",
which is based on sleep/wakeup style calls. Driver use
msleep()/pause() instead of DELAY based on CAN_SLEEP/NO_SLEEP
flags to avoid busy loop which is not required all the
time.e.a
a. While driver is getting loaded, driver calls most of the
commands with NO_SLEEP.
b. When Driver is functional and it needs Reinit of HBA,
CAN_SLEEP flag is used.
5. <mpslsi> driver is not Endian safe. It will not work on Big
Endian machines like Sparc and PowerPC platforms because it
assumes it is running on a Little Endian machine.
Driver code is modified such way that it does not assume CPU
arch is Little Endian.
a. All places where Driver interacts from HBA to Host, it
converts Little Endian format to CPU format.
b. All places where Driver interacts from Host to HBA, it
converts CPU format to Little Endian.
6. Findout memory leaks in FreeBSD Driver and resolve those,
such as memory leak in targ's luns creation/deletion.
Also added additional checks to see memory allocation
success/fail.
7. Add loginfo prints as debug message, i.e. When FW sends any
loginfo, Driver should print those as debug message.
This will help for debugging purpose.
8. There is possibility to get config request timeout. Current
driver is able to detect config request timetout, but it does
not do anything on config_request timeout. Driver should
call mps_reinit() if any request_poll (which is called as
part of config_request) is time out.
9. cdb length check is required for 32 byte CDB. Add correct mpi
control value for 32 bit CDB as below while submitting SCSI IO
Request to controller.
mpi_control |= 4 << MPI2_SCSIIO_CONTROL_ADDCDBLEN_SHIFT;
10. Check the actual status of Message unit reset
(mps_message_unit_reset).Previously FreeBSD Driver just writes
MPI2_FUNCTION_IOC_MESSAGE_UNIT_RESET and never check the ack
(it just wait for 50 millisecond). So, Driver now check the
status of "MPI2_FUNCTION_IOC_MESSAGE_UNIT_RESET" after writing
it to the FW.
Now it also checking for whether doorbell ack uses msleep with
proper sleep flags, instead of <DELAY>.
11. Previously CAM does not detect Multi-Lun Devices. In order to
detect Multi-Lun Devices by CAM the driver needs following change
set:
a. There is "max_lun" field which Driver need to set based on
hw/fw support. Currently LSI released driver does not set
this field.
b. Default of "max_lun" should not be 0 in OS, but it is
currently set to 0 in CAM layer.
c. Export max_lun capacity to 255
12. Driver will not reset target info after port enable complete and
also do Device removal when Device remove from FW. The detail
description is as follows
a. When Driver receive WD PD add events, it will add all
information in driver local data structure.
b. Only for WD, we have below checks after port enable
completes, where driver clear off all information retrieved
at #1.
if ((sc->WD_available &&
(sc->WD_hide_expose == MPS_WD_HIDE_ALWAYS)) ||
(sc->WD_valid_config && (sc->WD_hide_expose ==
MPS_WD_HIDE_IF_VOLUME)) {
// clear off target data structure.
}
It is mainly not to attach PDs to OS.
FreeBSD does bus rescan as older Parallel scsi style. So Driver
needs to handle which Drive is visible to OS. That is a reason
we have to clear off targ information for PDs.
Again, above logic was implemented long time ago. Similar concept
we have for non-wd also. For that, LSI have introduced different
logic to hide PDs.
Eventually, because of above gap, when Phy goes offline, we
observe below failure. That is what Driver is not doing complete
removal of device with FW. (which was pointed by Scott)
Apr 5 02:39:24 Freebsd7 kernel: mpslsi0: mpssas_prepare_remove
Apr 5 02:39:24 Freebsd7 kernel: mpssas_prepare_remove 497 : invalid handle 0xe
Now Driver will not reset target info after port enable complete
and also will do Device removal when Device remove from FW.
13. Returning "CAM_SEL_TIMEOUT" instead of "CAM_TID_INVALID"
error code on request to the Target IDs that have no devices
conected at that moment. As if "CAM_TID_INVALID" error code
is returned to the CAM Layaer then it results in a huge chain
of errors in verbose kernel messages on boot and every
hot-plug event.
Submitted by: Sreekanth Reddy <Sreekanth.Reddy@lsi.com>
MFC after: 3 days
2012-06-28 03:48:54 +00:00
|
|
|
* Copyright (c) 2011, 2012 LSI Corp.
|
2012-01-26 18:17:21 +00:00
|
|
|
* All rights reserved.
|
|
|
|
|
*
|
|
|
|
|
* Redistribution and use in source and binary forms, with or without
|
|
|
|
|
* modification, are permitted provided that the following conditions
|
|
|
|
|
* are met:
|
|
|
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
|
|
|
* notice, this list of conditions and the following disclaimer.
|
|
|
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
|
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
|
|
|
* documentation and/or other materials provided with the distribution.
|
|
|
|
|
*
|
|
|
|
|
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
|
|
|
|
|
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
|
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
|
|
|
|
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
|
|
|
|
|
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
|
|
|
|
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
|
|
|
|
|
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
|
|
|
|
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
|
|
|
|
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
|
|
|
|
|
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
|
|
|
|
|
* SUCH DAMAGE.
|
|
|
|
|
*
|
|
|
|
|
* LSI MPT-Fusion Host Adapter FreeBSD
|
|
|
|
|
*
|
|
|
|
|
* $FreeBSD$
|
|
|
|
|
*/
|
|
|
|
|
|
2010-09-10 15:03:56 +00:00
|
|
|
==============================
|
|
|
|
|
Fusion-MPT MPI 2.0 Header File Change History
|
|
|
|
|
==============================
|
|
|
|
|
|
Bring in LSI's latest mps(4) 6Gb SAS and WarpDrive driver, version
14.00.00.01-fbsd.
Their description of the changes is as follows:
1. Copyright contents has been changed in all respective .c
and .h files
2. Support for WRITE12 and READ12 for direct-io (warpdrive only)
has been added.
3. Driver has added checks to see if Drive has READ_CAP_16
support before sending it down to the device.
If SPC3_SID_PROTECT flag is set in the inquiry data, the
device supports protection information, and must support
the 16 byte read capacity command, otherwise continue without
sending read cap 16. This will optimize driver performance,
since it will not send READ_CAP_16 to the drive which does
not have support of READ_CAP_16.
4. With new approach, "MPTIOCTL_RESET_ADAPTER" IOCTL will not
use DELAY() which is busy loop implementation.
It will use <msleep> (Better way to sleep without busy
loop). Also from the HBA reset code path and some other
places, DELAY() is replaced with msleep() or "pause()",
which is based on sleep/wakeup style calls. Driver use
msleep()/pause() instead of DELAY based on CAN_SLEEP/NO_SLEEP
flags to avoid busy loop which is not required all the
time.e.a
a. While driver is getting loaded, driver calls most of the
commands with NO_SLEEP.
b. When Driver is functional and it needs Reinit of HBA,
CAN_SLEEP flag is used.
5. <mpslsi> driver is not Endian safe. It will not work on Big
Endian machines like Sparc and PowerPC platforms because it
assumes it is running on a Little Endian machine.
Driver code is modified such way that it does not assume CPU
arch is Little Endian.
a. All places where Driver interacts from HBA to Host, it
converts Little Endian format to CPU format.
b. All places where Driver interacts from Host to HBA, it
converts CPU format to Little Endian.
6. Findout memory leaks in FreeBSD Driver and resolve those,
such as memory leak in targ's luns creation/deletion.
Also added additional checks to see memory allocation
success/fail.
7. Add loginfo prints as debug message, i.e. When FW sends any
loginfo, Driver should print those as debug message.
This will help for debugging purpose.
8. There is possibility to get config request timeout. Current
driver is able to detect config request timetout, but it does
not do anything on config_request timeout. Driver should
call mps_reinit() if any request_poll (which is called as
part of config_request) is time out.
9. cdb length check is required for 32 byte CDB. Add correct mpi
control value for 32 bit CDB as below while submitting SCSI IO
Request to controller.
mpi_control |= 4 << MPI2_SCSIIO_CONTROL_ADDCDBLEN_SHIFT;
10. Check the actual status of Message unit reset
(mps_message_unit_reset).Previously FreeBSD Driver just writes
MPI2_FUNCTION_IOC_MESSAGE_UNIT_RESET and never check the ack
(it just wait for 50 millisecond). So, Driver now check the
status of "MPI2_FUNCTION_IOC_MESSAGE_UNIT_RESET" after writing
it to the FW.
Now it also checking for whether doorbell ack uses msleep with
proper sleep flags, instead of <DELAY>.
11. Previously CAM does not detect Multi-Lun Devices. In order to
detect Multi-Lun Devices by CAM the driver needs following change
set:
a. There is "max_lun" field which Driver need to set based on
hw/fw support. Currently LSI released driver does not set
this field.
b. Default of "max_lun" should not be 0 in OS, but it is
currently set to 0 in CAM layer.
c. Export max_lun capacity to 255
12. Driver will not reset target info after port enable complete and
also do Device removal when Device remove from FW. The detail
description is as follows
a. When Driver receive WD PD add events, it will add all
information in driver local data structure.
b. Only for WD, we have below checks after port enable
completes, where driver clear off all information retrieved
at #1.
if ((sc->WD_available &&
(sc->WD_hide_expose == MPS_WD_HIDE_ALWAYS)) ||
(sc->WD_valid_config && (sc->WD_hide_expose ==
MPS_WD_HIDE_IF_VOLUME)) {
// clear off target data structure.
}
It is mainly not to attach PDs to OS.
FreeBSD does bus rescan as older Parallel scsi style. So Driver
needs to handle which Drive is visible to OS. That is a reason
we have to clear off targ information for PDs.
Again, above logic was implemented long time ago. Similar concept
we have for non-wd also. For that, LSI have introduced different
logic to hide PDs.
Eventually, because of above gap, when Phy goes offline, we
observe below failure. That is what Driver is not doing complete
removal of device with FW. (which was pointed by Scott)
Apr 5 02:39:24 Freebsd7 kernel: mpslsi0: mpssas_prepare_remove
Apr 5 02:39:24 Freebsd7 kernel: mpssas_prepare_remove 497 : invalid handle 0xe
Now Driver will not reset target info after port enable complete
and also will do Device removal when Device remove from FW.
13. Returning "CAM_SEL_TIMEOUT" instead of "CAM_TID_INVALID"
error code on request to the Target IDs that have no devices
conected at that moment. As if "CAM_TID_INVALID" error code
is returned to the CAM Layaer then it results in a huge chain
of errors in verbose kernel messages on boot and every
hot-plug event.
Submitted by: Sreekanth Reddy <Sreekanth.Reddy@lsi.com>
MFC after: 3 days
2012-06-28 03:48:54 +00:00
|
|
|
Copyright (c) 2000-2012 LSI Corporation.
|
2010-09-10 15:03:56 +00:00
|
|
|
|
|
|
|
|
---------------------------------------
|
2012-01-26 18:17:21 +00:00
|
|
|
Header Set Release Version: 02.00.18
|
|
|
|
|
Header Set Release Date: 11-10-10
|
2010-09-10 15:03:56 +00:00
|
|
|
---------------------------------------
|
|
|
|
|
|
|
|
|
|
Filename Current version Prior version
|
|
|
|
|
---------- --------------- -------------
|
2012-01-26 18:17:21 +00:00
|
|
|
mpi2.h 02.00.18 02.00.17
|
|
|
|
|
mpi2_cnfg.h 02.00.17 02.00.16
|
|
|
|
|
mpi2_init.h 02.00.11 02.00.10
|
|
|
|
|
mpi2_ioc.h 02.00.16 02.00.15
|
|
|
|
|
mpi2_raid.h 02.00.05 02.00.05
|
|
|
|
|
mpi2_sas.h 02.00.05 02.00.05
|
|
|
|
|
mpi2_targ.h 02.00.04 02.00.04
|
|
|
|
|
mpi2_tool.h 02.00.06 02.00.06
|
2010-09-10 15:03:56 +00:00
|
|
|
mpi2_type.h 02.00.00 02.00.00
|
|
|
|
|
mpi2_ra.h 02.00.00 02.00.00
|
2012-01-26 18:17:21 +00:00
|
|
|
mpi2_hbd.h 02.00.01 02.00.01
|
|
|
|
|
mpi2_history.txt 02.00.18 02.00.17
|
2010-09-10 15:03:56 +00:00
|
|
|
|
|
|
|
|
|
|
|
|
|
* Date Version Description
|
|
|
|
|
* -------- -------- ------------------------------------------------------
|
|
|
|
|
|
|
|
|
|
mpi2.h
|
|
|
|
|
* 04-30-07 02.00.00 Corresponds to Fusion-MPT MPI Specification Rev A.
|
|
|
|
|
* 06-04-07 02.00.01 Bumped MPI2_HEADER_VERSION_UNIT.
|
|
|
|
|
* 06-26-07 02.00.02 Bumped MPI2_HEADER_VERSION_UNIT.
|
|
|
|
|
* 08-31-07 02.00.03 Bumped MPI2_HEADER_VERSION_UNIT.
|
|
|
|
|
* Moved ReplyPostHostIndex register to offset 0x6C of the
|
|
|
|
|
* MPI2_SYSTEM_INTERFACE_REGS and modified the define for
|
|
|
|
|
* MPI2_REPLY_POST_HOST_INDEX_OFFSET.
|
|
|
|
|
* Added union of request descriptors.
|
|
|
|
|
* Added union of reply descriptors.
|
|
|
|
|
* 10-31-07 02.00.04 Bumped MPI2_HEADER_VERSION_UNIT.
|
|
|
|
|
* Added define for MPI2_VERSION_02_00.
|
|
|
|
|
* Fixed the size of the FunctionDependent5 field in the
|
|
|
|
|
* MPI2_DEFAULT_REPLY structure.
|
|
|
|
|
* 12-18-07 02.00.05 Bumped MPI2_HEADER_VERSION_UNIT.
|
|
|
|
|
* Removed the MPI-defined Fault Codes and extended the
|
|
|
|
|
* product specific codes up to 0xEFFF.
|
|
|
|
|
* Added a sixth key value for the WriteSequence register
|
|
|
|
|
* and changed the flush value to 0x0.
|
|
|
|
|
* Added message function codes for Diagnostic Buffer Post
|
|
|
|
|
* and Diagnsotic Release.
|
|
|
|
|
* New IOCStatus define: MPI2_IOCSTATUS_DIAGNOSTIC_RELEASED
|
|
|
|
|
* Moved MPI2_VERSION_UNION from mpi2_ioc.h.
|
|
|
|
|
* 02-29-08 02.00.06 Bumped MPI2_HEADER_VERSION_UNIT.
|
|
|
|
|
* 03-03-08 02.00.07 Bumped MPI2_HEADER_VERSION_UNIT.
|
|
|
|
|
* 05-21-08 02.00.08 Bumped MPI2_HEADER_VERSION_UNIT.
|
|
|
|
|
* Added #defines for marking a reply descriptor as unused.
|
|
|
|
|
* 06-27-08 02.00.09 Bumped MPI2_HEADER_VERSION_UNIT.
|
|
|
|
|
* 10-02-08 02.00.10 Bumped MPI2_HEADER_VERSION_UNIT.
|
|
|
|
|
* Moved LUN field defines from mpi2_init.h.
|
|
|
|
|
* 01-19-09 02.00.11 Bumped MPI2_HEADER_VERSION_UNIT.
|
|
|
|
|
* 05-06-09 02.00.12 Bumped MPI2_HEADER_VERSION_UNIT.
|
|
|
|
|
* In all request and reply descriptors, replaced VF_ID
|
|
|
|
|
* field with MSIxIndex field.
|
|
|
|
|
* Removed DevHandle field from
|
|
|
|
|
* MPI2_SCSI_IO_SUCCESS_REPLY_DESCRIPTOR and made those
|
|
|
|
|
* bytes reserved.
|
|
|
|
|
* Added RAID Accelerator functionality.
|
|
|
|
|
* 07-30-09 02.00.13 Bumped MPI2_HEADER_VERSION_UNIT.
|
|
|
|
|
* 10-28-09 02.00.14 Bumped MPI2_HEADER_VERSION_UNIT.
|
|
|
|
|
* Added MSI-x index mask and shift for Reply Post Host
|
|
|
|
|
* Index register.
|
|
|
|
|
* Added function code for Host Based Discovery Action.
|
2012-01-26 18:17:21 +00:00
|
|
|
* 02-10-10 02.00.15 Bumped MPI2_HEADER_VERSION_UNIT.
|
|
|
|
|
* Added define for MPI2_FUNCTION_PWR_MGMT_CONTROL.
|
|
|
|
|
* Added defines for product-specific range of message
|
|
|
|
|
* function codes, 0xF0 to 0xFF.
|
|
|
|
|
* 05-12-10 02.00.16 Bumped MPI2_HEADER_VERSION_UNIT.
|
|
|
|
|
* Added alternative defines for the SGE Direction bit.
|
|
|
|
|
* 08-11-10 02.00.17 Bumped MPI2_HEADER_VERSION_UNIT.
|
|
|
|
|
* 11-10-10 02.00.18 Bumped MPI2_HEADER_VERSION_UNIT.
|
|
|
|
|
* Added MPI2_IEEE_SGE_FLAGS_SYSTEMPLBCPI_ADDR define.
|
2010-09-10 15:03:56 +00:00
|
|
|
* --------------------------------------------------------------------------
|
|
|
|
|
|
|
|
|
|
mpi2_cnfg.h
|
|
|
|
|
* 04-30-07 02.00.00 Corresponds to Fusion-MPT MPI Specification Rev A.
|
|
|
|
|
* 06-04-07 02.00.01 Added defines for SAS IO Unit Page 2 PhyFlags.
|
|
|
|
|
* Added Manufacturing Page 11.
|
|
|
|
|
* Added MPI2_SAS_EXPANDER0_FLAGS_CONNECTOR_END_DEVICE
|
|
|
|
|
* define.
|
|
|
|
|
* 06-26-07 02.00.02 Adding generic structure for product-specific
|
|
|
|
|
* Manufacturing pages: MPI2_CONFIG_PAGE_MANUFACTURING_PS.
|
|
|
|
|
* Rework of BIOS Page 2 configuration page.
|
|
|
|
|
* Fixed MPI2_BIOSPAGE2_BOOT_DEVICE to be a union of the
|
|
|
|
|
* forms.
|
|
|
|
|
* Added configuration pages IOC Page 8 and Driver
|
|
|
|
|
* Persistent Mapping Page 0.
|
|
|
|
|
* 08-31-07 02.00.03 Modified configuration pages dealing with Integrated
|
|
|
|
|
* RAID (Manufacturing Page 4, RAID Volume Pages 0 and 1,
|
|
|
|
|
* RAID Physical Disk Pages 0 and 1, RAID Configuration
|
|
|
|
|
* Page 0).
|
|
|
|
|
* Added new value for AccessStatus field of SAS Device
|
|
|
|
|
* Page 0 (_SATA_NEEDS_INITIALIZATION).
|
|
|
|
|
* 10-31-07 02.00.04 Added missing SEPDevHandle field to
|
|
|
|
|
* MPI2_CONFIG_PAGE_SAS_ENCLOSURE_0.
|
|
|
|
|
* 12-18-07 02.00.05 Modified IO Unit Page 0 to use 32-bit version fields for
|
|
|
|
|
* NVDATA.
|
|
|
|
|
* Modified IOC Page 7 to use masks and added field for
|
|
|
|
|
* SASBroadcastPrimitiveMasks.
|
|
|
|
|
* Added MPI2_CONFIG_PAGE_BIOS_4.
|
|
|
|
|
* Added MPI2_CONFIG_PAGE_LOG_0.
|
|
|
|
|
* 02-29-08 02.00.06 Modified various names to make them 32-character unique.
|
|
|
|
|
* Added SAS Device IDs.
|
|
|
|
|
* Updated Integrated RAID configuration pages including
|
|
|
|
|
* Manufacturing Page 4, IOC Page 6, and RAID Configuration
|
|
|
|
|
* Page 0.
|
|
|
|
|
* 05-21-08 02.00.07 Added define MPI2_MANPAGE4_MIX_SSD_SAS_SATA.
|
|
|
|
|
* Added define MPI2_MANPAGE4_PHYSDISK_128MB_COERCION.
|
|
|
|
|
* Fixed define MPI2_IOCPAGE8_FLAGS_ENCLOSURE_SLOT_MAPPING.
|
|
|
|
|
* Added missing MaxNumRoutedSasAddresses field to
|
|
|
|
|
* MPI2_CONFIG_PAGE_EXPANDER_0.
|
|
|
|
|
* Added SAS Port Page 0.
|
|
|
|
|
* Modified structure layout for
|
|
|
|
|
* MPI2_CONFIG_PAGE_DRIVER_MAPPING_0.
|
|
|
|
|
* 06-27-08 02.00.08 Changed MPI2_CONFIG_PAGE_RD_PDISK_1 to use
|
|
|
|
|
* MPI2_RAID_PHYS_DISK1_PATH_MAX to size the array.
|
|
|
|
|
* 10-02-08 02.00.09 Changed MPI2_RAID_PGAD_CONFIGNUM_MASK from 0x0000FFFF
|
|
|
|
|
* to 0x000000FF.
|
|
|
|
|
* Added two new values for the Physical Disk Coercion Size
|
|
|
|
|
* bits in the Flags field of Manufacturing Page 4.
|
|
|
|
|
* Added product-specific Manufacturing pages 16 to 31.
|
|
|
|
|
* Modified Flags bits for controlling write cache on SATA
|
|
|
|
|
* drives in IO Unit Page 1.
|
|
|
|
|
* Added new bit to AdditionalControlFlags of SAS IO Unit
|
|
|
|
|
* Page 1 to control Invalid Topology Correction.
|
|
|
|
|
* Added SupportedPhysDisks field to RAID Volume Page 1 and
|
|
|
|
|
* added related defines.
|
|
|
|
|
* Added additional defines for RAID Volume Page 0
|
|
|
|
|
* VolumeStatusFlags field.
|
|
|
|
|
* Modified meaning of RAID Volume Page 0 VolumeSettings
|
|
|
|
|
* define for auto-configure of hot-swap drives.
|
|
|
|
|
* Added PhysDiskAttributes field (and related defines) to
|
|
|
|
|
* RAID Physical Disk Page 0.
|
|
|
|
|
* Added MPI2_SAS_PHYINFO_PHY_VACANT define.
|
|
|
|
|
* Added three new DiscoveryStatus bits for SAS IO Unit
|
|
|
|
|
* Page 0 and SAS Expander Page 0.
|
|
|
|
|
* Removed multiplexing information from SAS IO Unit pages.
|
|
|
|
|
* Added BootDeviceWaitTime field to SAS IO Unit Page 4.
|
|
|
|
|
* Removed Zone Address Resolved bit from PhyInfo and from
|
|
|
|
|
* Expander Page 0 Flags field.
|
|
|
|
|
* Added two new AccessStatus values to SAS Device Page 0
|
|
|
|
|
* for indicating routing problems. Added 3 reserved words
|
|
|
|
|
* to this page.
|
|
|
|
|
* 01-19-09 02.00.10 Fixed defines for GPIOVal field of IO Unit Page 3.
|
|
|
|
|
* Inserted missing reserved field into structure for IOC
|
|
|
|
|
* Page 6.
|
|
|
|
|
* Added more pending task bits to RAID Volume Page 0
|
|
|
|
|
* VolumeStatusFlags defines.
|
|
|
|
|
* Added MPI2_PHYSDISK0_STATUS_FLAG_NOT_CERTIFIED define.
|
|
|
|
|
* Added a new DiscoveryStatus bit for SAS IO Unit Page 0
|
|
|
|
|
* and SAS Expander Page 0 to flag a downstream initiator
|
|
|
|
|
* when in simplified routing mode.
|
|
|
|
|
* Removed SATA Init Failure defines for DiscoveryStatus
|
|
|
|
|
* fields of SAS IO Unit Page 0 and SAS Expander Page 0.
|
|
|
|
|
* Added MPI2_SAS_DEVICE0_ASTATUS_DEVICE_BLOCKED define.
|
|
|
|
|
* Added PortGroups, DmaGroup, and ControlGroup fields to
|
|
|
|
|
* SAS Device Page 0.
|
|
|
|
|
* 05-06-09 02.00.11 Added structures and defines for IO Unit Page 5 and IO
|
|
|
|
|
* Unit Page 6.
|
|
|
|
|
* Added expander reduced functionality data to SAS
|
|
|
|
|
* Expander Page 0.
|
|
|
|
|
* Added SAS PHY Page 2 and SAS PHY Page 3.
|
|
|
|
|
* 07-30-09 02.00.12 Added IO Unit Page 7.
|
|
|
|
|
* Added new device ids.
|
|
|
|
|
* Added SAS IO Unit Page 5.
|
|
|
|
|
* Added partial and slumber power management capable flags
|
|
|
|
|
* to SAS Device Page 0 Flags field.
|
|
|
|
|
* Added PhyInfo defines for power condition.
|
|
|
|
|
* Added Ethernet configuration pages.
|
|
|
|
|
* 10-28-09 02.00.13 Added MPI2_IOUNITPAGE1_ENABLE_HOST_BASED_DISCOVERY.
|
|
|
|
|
* Added SAS PHY Page 4 structure and defines.
|
2012-01-26 18:17:21 +00:00
|
|
|
* 02-10-10 02.00.14 Modified the comments for the configuration page
|
|
|
|
|
* structures that contain an array of data. The host
|
|
|
|
|
* should use the "count" field in the page data (e.g. the
|
|
|
|
|
* NumPhys field) to determine the number of valid elements
|
|
|
|
|
* in the array.
|
|
|
|
|
* Added/modified some MPI2_MFGPAGE_DEVID_SAS defines.
|
|
|
|
|
* Added PowerManagementCapabilities to IO Unit Page 7.
|
|
|
|
|
* Added PortWidthModGroup field to
|
|
|
|
|
* MPI2_SAS_IO_UNIT5_PHY_PM_SETTINGS.
|
|
|
|
|
* Added MPI2_CONFIG_PAGE_SASIOUNIT_6 and related defines.
|
|
|
|
|
* Added MPI2_CONFIG_PAGE_SASIOUNIT_7 and related defines.
|
|
|
|
|
* Added MPI2_CONFIG_PAGE_SASIOUNIT_8 and related defines.
|
|
|
|
|
* 05-12-10 02.00.15 Added MPI2_RAIDVOL0_STATUS_FLAG_VOL_NOT_CONSISTENT
|
|
|
|
|
* define.
|
|
|
|
|
* Added MPI2_PHYSDISK0_INCOMPATIBLE_MEDIA_TYPE define.
|
|
|
|
|
* Added MPI2_SAS_NEG_LINK_RATE_UNSUPPORTED_PHY define.
|
|
|
|
|
* 08-11-10 02.00.16 Removed IO Unit Page 1 device path (multi-pathing)
|
|
|
|
|
* defines.
|
|
|
|
|
* 11-10-10 02.00.17 Added ReceptacleID field (replacing Reserved1) to
|
|
|
|
|
* MPI2_MANPAGE7_CONNECTOR_INFO and reworked defines for
|
|
|
|
|
* the Pinout field.
|
|
|
|
|
* Added BoardTemperature and BoardTemperatureUnits fields
|
|
|
|
|
* to MPI2_CONFIG_PAGE_IO_UNIT_7.
|
|
|
|
|
* Added MPI2_CONFIG_EXTPAGETYPE_EXT_MANUFACTURING define
|
|
|
|
|
* and MPI2_CONFIG_PAGE_EXT_MAN_PS structure.
|
2010-09-10 15:03:56 +00:00
|
|
|
* --------------------------------------------------------------------------
|
|
|
|
|
|
|
|
|
|
mpi2_init.h
|
|
|
|
|
* 04-30-07 02.00.00 Corresponds to Fusion-MPT MPI Specification Rev A.
|
|
|
|
|
* 10-31-07 02.00.01 Fixed name for pMpi2SCSITaskManagementRequest_t.
|
|
|
|
|
* 12-18-07 02.00.02 Modified Task Management Target Reset Method defines.
|
|
|
|
|
* 02-29-08 02.00.03 Added Query Task Set and Query Unit Attention.
|
|
|
|
|
* 03-03-08 02.00.04 Fixed name of struct _MPI2_SCSI_TASK_MANAGE_REPLY.
|
|
|
|
|
* 05-21-08 02.00.05 Fixed typo in name of Mpi2SepRequest_t.
|
|
|
|
|
* 10-02-08 02.00.06 Removed Untagged and No Disconnect values from SCSI IO
|
|
|
|
|
* Control field Task Attribute flags.
|
|
|
|
|
* Moved LUN field defines to mpi2.h becasue they are
|
|
|
|
|
* common to many structures.
|
|
|
|
|
* 05-06-09 02.00.07 Changed task management type of Query Unit Attention to
|
|
|
|
|
* Query Asynchronous Event.
|
|
|
|
|
* Defined two new bits in the SlotStatus field of the SCSI
|
|
|
|
|
* Enclosure Processor Request and Reply.
|
|
|
|
|
* 10-28-09 02.00.08 Added defines for decoding the ResponseInfo bytes for
|
|
|
|
|
* both SCSI IO Error Reply and SCSI Task Management Reply.
|
|
|
|
|
* Added ResponseInfo field to MPI2_SCSI_TASK_MANAGE_REPLY.
|
|
|
|
|
* Added MPI2_SCSITASKMGMT_RSP_TM_OVERLAPPED_TAG define.
|
2012-01-26 18:17:21 +00:00
|
|
|
* 02-10-10 02.00.09 Removed unused structure that had "#if 0" around it.
|
|
|
|
|
* 05-12-10 02.00.10 Added optional vendor-unique region to SCSI IO Request.
|
|
|
|
|
* 11-10-10 02.00.11 Added MPI2_SCSIIO_NUM_SGLOFFSETS define.
|
2010-09-10 15:03:56 +00:00
|
|
|
* --------------------------------------------------------------------------
|
|
|
|
|
|
|
|
|
|
mpi2_ioc.h
|
|
|
|
|
* 04-30-07 02.00.00 Corresponds to Fusion-MPT MPI Specification Rev A.
|
|
|
|
|
* 06-04-07 02.00.01 In IOCFacts Reply structure, renamed MaxDevices to
|
|
|
|
|
* MaxTargets.
|
|
|
|
|
* Added TotalImageSize field to FWDownload Request.
|
|
|
|
|
* Added reserved words to FWUpload Request.
|
|
|
|
|
* 06-26-07 02.00.02 Added IR Configuration Change List Event.
|
|
|
|
|
* 08-31-07 02.00.03 Removed SystemReplyQueueDepth field from the IOCInit
|
|
|
|
|
* request and replaced it with
|
|
|
|
|
* ReplyDescriptorPostQueueDepth and ReplyFreeQueueDepth.
|
|
|
|
|
* Replaced the MinReplyQueueDepth field of the IOCFacts
|
|
|
|
|
* reply with MaxReplyDescriptorPostQueueDepth.
|
|
|
|
|
* Added MPI2_RDPQ_DEPTH_MIN define to specify the minimum
|
|
|
|
|
* depth for the Reply Descriptor Post Queue.
|
|
|
|
|
* Added SASAddress field to Initiator Device Table
|
|
|
|
|
* Overflow Event data.
|
|
|
|
|
* 10-31-07 02.00.04 Added ReasonCode MPI2_EVENT_SAS_INIT_RC_NOT_RESPONDING
|
|
|
|
|
* for SAS Initiator Device Status Change Event data.
|
|
|
|
|
* Modified Reason Code defines for SAS Topology Change
|
|
|
|
|
* List Event data, including adding a bit for PHY Vacant
|
|
|
|
|
* status, and adding a mask for the Reason Code.
|
|
|
|
|
* Added define for
|
|
|
|
|
* MPI2_EVENT_SAS_TOPO_ES_DELAY_NOT_RESPONDING.
|
|
|
|
|
* Added define for MPI2_EXT_IMAGE_TYPE_MEGARAID.
|
|
|
|
|
* 12-18-07 02.00.05 Added Boot Status defines for the IOCExceptions field of
|
|
|
|
|
* the IOCFacts Reply.
|
|
|
|
|
* Removed MPI2_IOCFACTS_CAPABILITY_EXTENDED_BUFFER define.
|
|
|
|
|
* Moved MPI2_VERSION_UNION to mpi2.h.
|
|
|
|
|
* Changed MPI2_EVENT_NOTIFICATION_REQUEST to use masks
|
|
|
|
|
* instead of enables, and added SASBroadcastPrimitiveMasks
|
|
|
|
|
* field.
|
|
|
|
|
* Added Log Entry Added Event and related structure.
|
|
|
|
|
* 02-29-08 02.00.06 Added define MPI2_IOCFACTS_CAPABILITY_INTEGRATED_RAID.
|
|
|
|
|
* Removed define MPI2_IOCFACTS_PROTOCOL_SMP_TARGET.
|
|
|
|
|
* Added MaxVolumes and MaxPersistentEntries fields to
|
|
|
|
|
* IOCFacts reply.
|
|
|
|
|
* Added ProtocalFlags and IOCCapabilities fields to
|
|
|
|
|
* MPI2_FW_IMAGE_HEADER.
|
|
|
|
|
* Removed MPI2_PORTENABLE_FLAGS_ENABLE_SINGLE_PORT.
|
|
|
|
|
* 03-03-08 02.00.07 Fixed MPI2_FW_IMAGE_HEADER by changing Reserved26 to
|
|
|
|
|
* a U16 (from a U32).
|
|
|
|
|
* Removed extra 's' from EventMasks name.
|
|
|
|
|
* 06-27-08 02.00.08 Fixed an offset in a comment.
|
|
|
|
|
* 10-02-08 02.00.09 Removed SystemReplyFrameSize from MPI2_IOC_INIT_REQUEST.
|
|
|
|
|
* Removed CurReplyFrameSize from MPI2_IOC_FACTS_REPLY and
|
|
|
|
|
* renamed MinReplyFrameSize to ReplyFrameSize.
|
|
|
|
|
* Added MPI2_IOCFACTS_EXCEPT_IR_FOREIGN_CONFIG_MAX.
|
|
|
|
|
* Added two new RAIDOperation values for Integrated RAID
|
|
|
|
|
* Operations Status Event data.
|
|
|
|
|
* Added four new IR Configuration Change List Event data
|
|
|
|
|
* ReasonCode values.
|
|
|
|
|
* Added two new ReasonCode defines for SAS Device Status
|
|
|
|
|
* Change Event data.
|
|
|
|
|
* Added three new DiscoveryStatus bits for the SAS
|
|
|
|
|
* Discovery event data.
|
|
|
|
|
* Added Multiplexing Status Change bit to the PhyStatus
|
|
|
|
|
* field of the SAS Topology Change List event data.
|
|
|
|
|
* Removed define for MPI2_INIT_IMAGE_BOOTFLAGS_XMEMCOPY.
|
|
|
|
|
* BootFlags are now product-specific.
|
|
|
|
|
* Added defines for the indivdual signature bytes
|
|
|
|
|
* for MPI2_INIT_IMAGE_FOOTER.
|
|
|
|
|
* 01-19-09 02.00.10 Added MPI2_IOCFACTS_CAPABILITY_EVENT_REPLAY define.
|
|
|
|
|
* Added MPI2_EVENT_SAS_DISC_DS_DOWNSTREAM_INITIATOR
|
|
|
|
|
* define.
|
|
|
|
|
* Added MPI2_EVENT_SAS_DEV_STAT_RC_SATA_INIT_FAILURE
|
|
|
|
|
* define.
|
|
|
|
|
* Removed MPI2_EVENT_SAS_DISC_DS_SATA_INIT_FAILURE define.
|
|
|
|
|
* 05-06-09 02.00.11 Added MPI2_IOCFACTS_CAPABILITY_RAID_ACCELERATOR define.
|
|
|
|
|
* Added MPI2_IOCFACTS_CAPABILITY_MSI_X_INDEX define.
|
|
|
|
|
* Added two new reason codes for SAS Device Status Change
|
|
|
|
|
* Event.
|
|
|
|
|
* Added new event: SAS PHY Counter.
|
|
|
|
|
* 07-30-09 02.00.12 Added GPIO Interrupt event define and structure.
|
|
|
|
|
* Added MPI2_IOCFACTS_CAPABILITY_EXTENDED_BUFFER define.
|
|
|
|
|
* Added new product id family for 2208.
|
|
|
|
|
* 10-28-09 02.00.13 Added HostMSIxVectors field to MPI2_IOC_INIT_REQUEST.
|
|
|
|
|
* Added MaxMSIxVectors field to MPI2_IOC_FACTS_REPLY.
|
|
|
|
|
* Added MinDevHandle field to MPI2_IOC_FACTS_REPLY.
|
|
|
|
|
* Added MPI2_IOCFACTS_CAPABILITY_HOST_BASED_DISCOVERY.
|
|
|
|
|
* Added MPI2_EVENT_HOST_BASED_DISCOVERY_PHY define.
|
|
|
|
|
* Added MPI2_EVENT_SAS_TOPO_ES_NO_EXPANDER define.
|
|
|
|
|
* Added Host Based Discovery Phy Event data.
|
|
|
|
|
* Added defines for ProductID Product field
|
|
|
|
|
* (MPI2_FW_HEADER_PID_).
|
|
|
|
|
* Modified values for SAS ProductID Family
|
|
|
|
|
* (MPI2_FW_HEADER_PID_FAMILY_).
|
2012-01-26 18:17:21 +00:00
|
|
|
* 02-10-10 02.00.14 Added SAS Quiesce Event structure and defines.
|
|
|
|
|
* Added PowerManagementControl Request structures and
|
|
|
|
|
* defines.
|
|
|
|
|
* 05-12-10 02.00.15 Marked Task Set Full Event as obsolete.
|
|
|
|
|
* Added MPI2_EVENT_SAS_TOPO_LR_UNSUPPORTED_PHY define.
|
|
|
|
|
* 11-10-10 02.00.16 Added MPI2_FW_DOWNLOAD_ITYPE_MIN_PRODUCT_SPECIFIC.
|
2010-09-10 15:03:56 +00:00
|
|
|
* --------------------------------------------------------------------------
|
|
|
|
|
|
|
|
|
|
mpi2_raid.h
|
|
|
|
|
* 04-30-07 02.00.00 Corresponds to Fusion-MPT MPI Specification Rev A.
|
|
|
|
|
* 08-31-07 02.00.01 Modifications to RAID Action request and reply,
|
|
|
|
|
* including the Actions and ActionData.
|
|
|
|
|
* 02-29-08 02.00.02 Added MPI2_RAID_ACTION_ADATA_DISABL_FULL_REBUILD.
|
|
|
|
|
* 05-21-08 02.00.03 Added MPI2_RAID_VOL_CREATION_NUM_PHYSDISKS so that
|
|
|
|
|
* the PhysDisk array in MPI2_RAID_VOLUME_CREATION_STRUCT
|
|
|
|
|
* can be sized by the build environment.
|
|
|
|
|
* 07-30-09 02.00.04 Added proper define for the Use Default Settings bit of
|
|
|
|
|
* VolumeCreationFlags and marked the old one as obsolete.
|
2012-01-26 18:17:21 +00:00
|
|
|
* 05-12-10 02.00.05 Added MPI2_RAID_VOL_FLAGS_OP_MDC define.
|
2010-09-10 15:03:56 +00:00
|
|
|
* --------------------------------------------------------------------------
|
|
|
|
|
|
|
|
|
|
mpi2_sas.h
|
|
|
|
|
* 04-30-07 02.00.00 Corresponds to Fusion-MPT MPI Specification Rev A.
|
|
|
|
|
* 06-26-07 02.00.01 Added Clear All Persistent Operation to SAS IO Unit
|
|
|
|
|
* Control Request.
|
|
|
|
|
* 10-02-08 02.00.02 Added Set IOC Parameter Operation to SAS IO Unit Control
|
|
|
|
|
* Request.
|
|
|
|
|
* 10-28-09 02.00.03 Changed the type of SGL in MPI2_SATA_PASSTHROUGH_REQUEST
|
|
|
|
|
* to MPI2_SGE_IO_UNION since it supports chained SGLs.
|
2012-01-26 18:17:21 +00:00
|
|
|
* 05-12-10 02.00.04 Modified some comments.
|
|
|
|
|
* 08-11-10 02.00.05 Added NCQ operations to SAS IO Unit Control.
|
2010-09-10 15:03:56 +00:00
|
|
|
* --------------------------------------------------------------------------
|
|
|
|
|
|
|
|
|
|
mpi2_targ.h
|
|
|
|
|
* 04-30-07 02.00.00 Corresponds to Fusion-MPT MPI Specification Rev A.
|
|
|
|
|
* 08-31-07 02.00.01 Added Command Buffer Data Location Address Space bits to
|
|
|
|
|
* BufferPostFlags field of CommandBufferPostBase Request.
|
|
|
|
|
* 02-29-08 02.00.02 Modified various names to make them 32-character unique.
|
|
|
|
|
* 10-02-08 02.00.03 Removed NextCmdBufferOffset from
|
|
|
|
|
* MPI2_TARGET_CMD_BUF_POST_BASE_REQUEST.
|
|
|
|
|
* Target Status Send Request only takes a single SGE for
|
|
|
|
|
* response data.
|
2012-01-26 18:17:21 +00:00
|
|
|
* 02-10-10 02.00.04 Added comment to MPI2_TARGET_SSP_RSP_IU structure.
|
2010-09-10 15:03:56 +00:00
|
|
|
* --------------------------------------------------------------------------
|
|
|
|
|
|
|
|
|
|
mpi2_tool.h
|
|
|
|
|
* 04-30-07 02.00.00 Corresponds to Fusion-MPT MPI Specification Rev A.
|
|
|
|
|
* 12-18-07 02.00.01 Added Diagnostic Buffer Post and Diagnostic Release
|
|
|
|
|
* structures and defines.
|
|
|
|
|
* 02-29-08 02.00.02 Modified various names to make them 32-character unique.
|
|
|
|
|
* 05-06-09 02.00.03 Added ISTWI Read Write Tool and Diagnostic CLI Tool.
|
|
|
|
|
* 07-30-09 02.00.04 Added ExtendedType field to DiagnosticBufferPost request
|
|
|
|
|
* and reply messages.
|
|
|
|
|
* Added MPI2_DIAG_BUF_TYPE_EXTENDED.
|
|
|
|
|
* Incremented MPI2_DIAG_BUF_TYPE_COUNT.
|
2012-01-26 18:17:21 +00:00
|
|
|
* 05-12-10 02.00.05 Added Diagnostic Data Upload tool.
|
|
|
|
|
* 08-11-10 02.00.06 Added defines that were missing for Diagnostic Buffer
|
|
|
|
|
* Post Request.
|
2010-09-10 15:03:56 +00:00
|
|
|
* --------------------------------------------------------------------------
|
|
|
|
|
|
|
|
|
|
mpi2_type.h
|
|
|
|
|
* 04-30-07 02.00.00 Corresponds to Fusion-MPT MPI Specification Rev A.
|
|
|
|
|
* --------------------------------------------------------------------------
|
|
|
|
|
|
|
|
|
|
mpi2_ra.h
|
|
|
|
|
* 05-06-09 02.00.00 Initial version.
|
|
|
|
|
* --------------------------------------------------------------------------
|
|
|
|
|
|
|
|
|
|
mpi2_hbd.h
|
|
|
|
|
* 10-28-09 02.00.00 Initial version.
|
2012-01-26 18:17:21 +00:00
|
|
|
* 08-11-10 02.00.01 Removed PortGroups, DmaGroup, and ControlGroup from
|
|
|
|
|
* HBD Action request, replaced by AdditionalInfo field.
|
2010-09-10 15:03:56 +00:00
|
|
|
* --------------------------------------------------------------------------
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
mpi2_history.txt Parts list history
|
|
|
|
|
|
2012-01-26 18:17:21 +00:00
|
|
|
Filename 02.00.18
|
|
|
|
|
---------- --------
|
|
|
|
|
mpi2.h 02.00.18
|
|
|
|
|
mpi2_cnfg.h 02.00.17
|
|
|
|
|
mpi2_init.h 02.00.11
|
|
|
|
|
mpi2_ioc.h 02.00.16
|
|
|
|
|
mpi2_raid.h 02.00.05
|
|
|
|
|
mpi2_sas.h 02.00.05
|
|
|
|
|
mpi2_targ.h 02.00.04
|
|
|
|
|
mpi2_tool.h 02.00.06
|
|
|
|
|
mpi2_type.h 02.00.00
|
|
|
|
|
mpi2_ra.h 02.00.00
|
|
|
|
|
mpi2_hbd.h 02.00.01
|
|
|
|
|
|
|
|
|
|
Filename 02.00.17 02.00.16 02.00.15 02.00.14 02.00.13 02.00.12
|
|
|
|
|
---------- -------- -------- -------- -------- -------- --------
|
|
|
|
|
mpi2.h 02.00.17 02.00.16 02.00.15 02.00.14 02.00.13 02.00.12
|
|
|
|
|
mpi2_cnfg.h 02.00.16 02.00.15 02.00.14 02.00.13 02.00.12 02.00.11
|
|
|
|
|
mpi2_init.h 02.00.10 02.00.10 02.00.09 02.00.08 02.00.07 02.00.07
|
|
|
|
|
mpi2_ioc.h 02.00.15 02.00.15 02.00.14 02.00.13 02.00.12 02.00.11
|
|
|
|
|
mpi2_raid.h 02.00.05 02.00.05 02.00.04 02.00.04 02.00.04 02.00.03
|
|
|
|
|
mpi2_sas.h 02.00.05 02.00.04 02.00.03 02.00.03 02.00.02 02.00.02
|
|
|
|
|
mpi2_targ.h 02.00.04 02.00.04 02.00.04 02.00.03 02.00.03 02.00.03
|
|
|
|
|
mpi2_tool.h 02.00.06 02.00.05 02.00.04 02.00.04 02.00.04 02.00.03
|
|
|
|
|
mpi2_type.h 02.00.00 02.00.00 02.00.00 02.00.00 02.00.00 02.00.00
|
|
|
|
|
mpi2_ra.h 02.00.00 02.00.00 02.00.00 02.00.00 02.00.00 02.00.00
|
|
|
|
|
mpi2_hbd.h 02.00.01 02.00.00 02.00.00 02.00.00
|
2010-09-10 15:03:56 +00:00
|
|
|
|
|
|
|
|
Filename 02.00.11 02.00.10 02.00.09 02.00.08 02.00.07 02.00.06
|
|
|
|
|
---------- -------- -------- -------- -------- -------- --------
|
|
|
|
|
mpi2.h 02.00.11 02.00.10 02.00.09 02.00.08 02.00.07 02.00.06
|
|
|
|
|
mpi2_cnfg.h 02.00.10 02.00.09 02.00.08 02.00.07 02.00.06 02.00.06
|
|
|
|
|
mpi2_init.h 02.00.06 02.00.06 02.00.05 02.00.05 02.00.04 02.00.03
|
|
|
|
|
mpi2_ioc.h 02.00.10 02.00.09 02.00.08 02.00.07 02.00.07 02.00.06
|
|
|
|
|
mpi2_raid.h 02.00.03 02.00.03 02.00.03 02.00.03 02.00.02 02.00.02
|
|
|
|
|
mpi2_sas.h 02.00.02 02.00.02 02.00.01 02.00.01 02.00.01 02.00.01
|
|
|
|
|
mpi2_targ.h 02.00.03 02.00.03 02.00.02 02.00.02 02.00.02 02.00.02
|
|
|
|
|
mpi2_tool.h 02.00.02 02.00.02 02.00.02 02.00.02 02.00.02 02.00.02
|
|
|
|
|
mpi2_type.h 02.00.00 02.00.00 02.00.00 02.00.00 02.00.00 02.00.00
|
|
|
|
|
|
|
|
|
|
Filename 02.00.05 02.00.04 02.00.03 02.00.02 02.00.01 02.00.00
|
|
|
|
|
---------- -------- -------- -------- -------- -------- --------
|
|
|
|
|
mpi2.h 02.00.05 02.00.04 02.00.03 02.00.02 02.00.01 02.00.00
|
|
|
|
|
mpi2_cnfg.h 02.00.05 02.00.04 02.00.03 02.00.02 02.00.01 02.00.00
|
|
|
|
|
mpi2_init.h 02.00.02 02.00.01 02.00.00 02.00.00 02.00.00 02.00.00
|
|
|
|
|
mpi2_ioc.h 02.00.05 02.00.04 02.00.03 02.00.02 02.00.01 02.00.00
|
|
|
|
|
mpi2_raid.h 02.00.01 02.00.01 02.00.01 02.00.00 02.00.00 02.00.00
|
|
|
|
|
mpi2_sas.h 02.00.01 02.00.01 02.00.01 02.00.01 02.00.00 02.00.00
|
|
|
|
|
mpi2_targ.h 02.00.01 02.00.01 02.00.01 02.00.00 02.00.00 02.00.00
|
|
|
|
|
mpi2_tool.h 02.00.01 02.00.00 02.00.00 02.00.00 02.00.00 02.00.00
|
|
|
|
|
mpi2_type.h 02.00.00 02.00.00 02.00.00 02.00.00 02.00.00 02.00.00
|
|
|
|
|
|