freebsd-dev/usr.sbin/bhyve/usb_mouse.c

Ignoring revisions in .git-blame-ignore-revs. Click here to bypass and see the normal blame view.

825 lines
20 KiB
C
Raw Normal View History

/*-
* SPDX-License-Identifier: BSD-2-Clause
*
* Copyright (c) 2014 Leon Dang <ldang@nahannisys.com>
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*/
#include <sys/cdefs.h>
#include <sys/time.h>
Initial support for bhyve save and restore. Save and restore (also known as suspend and resume) permits a snapshot to be taken of a guest's state that can later be resumed. In the current implementation, bhyve(8) creates a UNIX domain socket that is used by bhyvectl(8) to send a request to save a snapshot (and optionally exit after the snapshot has been taken). A snapshot currently consists of two files: the first holds a copy of guest RAM, and the second file holds other guest state such as vCPU register values and device model state. To resume a guest, bhyve(8) must be started with a matching pair of command line arguments to instantiate the same set of device models as well as a pointer to the saved snapshot. While the current implementation is useful for several uses cases, it has a few limitations. The file format for saving the guest state is tied to the ABI of internal bhyve structures and is not self-describing (in that it does not communicate the set of device models present in the system). In addition, the state saved for some device models closely matches the internal data structures which might prove a challenge for compatibility of snapshot files across a range of bhyve versions. The file format also does not currently support versioning of individual chunks of state. As a result, the current file format is not a fixed binary format and future revisions to save and restore will break binary compatiblity of snapshot files. The goal is to move to a more flexible format that adds versioning, etc. and at that point to commit to providing a reasonable level of compatibility. As a result, the current implementation is not enabled by default. It can be enabled via the WITH_BHYVE_SNAPSHOT=yes option for userland builds, and the kernel option BHYVE_SHAPSHOT. Submitted by: Mihai Tiganus, Flavius Anton, Darius Mihai Submitted by: Elena Mihailescu, Mihai Carabas, Sergiu Weisz Relnotes: yes Sponsored by: University Politehnica of Bucharest Sponsored by: Matthew Grooms (student scholarships) Sponsored by: iXsystems Differential Revision: https://reviews.freebsd.org/D19495
2020-05-05 00:02:04 +00:00
#include <machine/vmm_snapshot.h>
#include <pthread.h>
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <dev/usb/usb.h>
#include <dev/usb/usbdi.h>
#include "usb_emul.h"
#include "console.h"
#include "bhyvegc.h"
#include "debug.h"
static int umouse_debug = 0;
#define DPRINTF(params) if (umouse_debug) PRINTLN params
#define WPRINTF(params) PRINTLN params
/* USB endpoint context (1-15) for reporting mouse data events*/
#define UMOUSE_INTR_ENDPT 1
#define UMOUSE_REPORT_DESC_TYPE 0x22
#define UMOUSE_GET_REPORT 0x01
#define UMOUSE_GET_IDLE 0x02
#define UMOUSE_GET_PROTOCOL 0x03
#define UMOUSE_SET_REPORT 0x09
#define UMOUSE_SET_IDLE 0x0A
#define UMOUSE_SET_PROTOCOL 0x0B
#define HSETW(ptr, val) ptr = { (uint8_t)(val), (uint8_t)((val) >> 8) }
enum {
UMSTR_LANG,
UMSTR_MANUFACTURER,
UMSTR_PRODUCT,
UMSTR_SERIAL,
UMSTR_CONFIG,
UMSTR_MAX
};
static const char *umouse_desc_strings[] = {
"\x09\x04",
"BHYVE",
"HID Tablet",
"01",
"HID Tablet Device",
};
struct umouse_hid_descriptor {
uint8_t bLength;
uint8_t bDescriptorType;
uint8_t bcdHID[2];
uint8_t bCountryCode;
uint8_t bNumDescriptors;
uint8_t bReportDescriptorType;
uint8_t wItemLength[2];
} __packed;
struct umouse_config_desc {
struct usb_config_descriptor confd;
struct usb_interface_descriptor ifcd;
struct umouse_hid_descriptor hidd;
struct usb_endpoint_descriptor endpd;
struct usb_endpoint_ss_comp_descriptor sscompd;
} __packed;
#define MOUSE_MAX_X 0x8000
#define MOUSE_MAX_Y 0x8000
static const uint8_t umouse_report_desc[] = {
0x05, 0x01, /* USAGE_PAGE (Generic Desktop) */
0x09, 0x02, /* USAGE (Mouse) */
0xa1, 0x01, /* COLLECTION (Application) */
0x09, 0x01, /* USAGE (Pointer) */
0xa1, 0x00, /* COLLECTION (Physical) */
0x05, 0x09, /* USAGE_PAGE (Button) */
0x19, 0x01, /* USAGE_MINIMUM (Button 1) */
0x29, 0x03, /* USAGE_MAXIMUM (Button 3) */
0x15, 0x00, /* LOGICAL_MINIMUM (0) */
0x25, 0x01, /* LOGICAL_MAXIMUM (1) */
0x75, 0x01, /* REPORT_SIZE (1) */
0x95, 0x03, /* REPORT_COUNT (3) */
0x81, 0x02, /* INPUT (Data,Var,Abs); 3 buttons */
0x75, 0x05, /* REPORT_SIZE (5) */
0x95, 0x01, /* REPORT_COUNT (1) */
0x81, 0x03, /* INPUT (Cnst,Var,Abs); padding */
0x05, 0x01, /* USAGE_PAGE (Generic Desktop) */
0x09, 0x30, /* USAGE (X) */
0x09, 0x31, /* USAGE (Y) */
0x35, 0x00, /* PHYSICAL_MINIMUM (0) */
0x46, 0xff, 0x7f, /* PHYSICAL_MAXIMUM (0x7fff) */
0x15, 0x00, /* LOGICAL_MINIMUM (0) */
0x26, 0xff, 0x7f, /* LOGICAL_MAXIMUM (0x7fff) */
0x75, 0x10, /* REPORT_SIZE (16) */
0x95, 0x02, /* REPORT_COUNT (2) */
0x81, 0x02, /* INPUT (Data,Var,Abs) */
0x05, 0x01, /* USAGE Page (Generic Desktop) */
0x09, 0x38, /* USAGE (Wheel) */
0x35, 0x00, /* PHYSICAL_MINIMUM (0) */
0x45, 0x00, /* PHYSICAL_MAXIMUM (0) */
0x15, 0x81, /* LOGICAL_MINIMUM (-127) */
0x25, 0x7f, /* LOGICAL_MAXIMUM (127) */
0x75, 0x08, /* REPORT_SIZE (8) */
0x95, 0x01, /* REPORT_COUNT (1) */
0x81, 0x06, /* INPUT (Data,Var,Rel) */
0xc0, /* END_COLLECTION */
0xc0 /* END_COLLECTION */
};
struct umouse_report {
uint8_t buttons; /* bits: 0 left, 1 right, 2 middle */
int16_t x; /* x position */
int16_t y; /* y position */
int8_t z; /* z wheel position */
} __packed;
#define MSETW(ptr, val) ptr = { (uint8_t)(val), (uint8_t)((val) >> 8) }
static struct usb_device_descriptor umouse_dev_desc = {
.bLength = sizeof(umouse_dev_desc),
.bDescriptorType = UDESC_DEVICE,
MSETW(.bcdUSB, UD_USB_3_0),
.bMaxPacketSize = 8, /* max packet size */
MSETW(.idVendor, 0xFB5D), /* vendor */
MSETW(.idProduct, 0x0001), /* product */
MSETW(.bcdDevice, 0), /* device version */
.iManufacturer = UMSTR_MANUFACTURER,
.iProduct = UMSTR_PRODUCT,
.iSerialNumber = UMSTR_SERIAL,
.bNumConfigurations = 1,
};
static struct umouse_config_desc umouse_confd = {
.confd = {
.bLength = sizeof(umouse_confd.confd),
.bDescriptorType = UDESC_CONFIG,
.wTotalLength[0] = sizeof(umouse_confd),
.bNumInterface = 1,
.bConfigurationValue = 1,
.iConfiguration = UMSTR_CONFIG,
.bmAttributes = UC_BUS_POWERED | UC_REMOTE_WAKEUP,
.bMaxPower = 0,
},
.ifcd = {
.bLength = sizeof(umouse_confd.ifcd),
.bDescriptorType = UDESC_INTERFACE,
.bNumEndpoints = 1,
.bInterfaceClass = UICLASS_HID,
.bInterfaceSubClass = UISUBCLASS_BOOT,
.bInterfaceProtocol = UIPROTO_MOUSE,
},
.hidd = {
.bLength = sizeof(umouse_confd.hidd),
.bDescriptorType = 0x21,
.bcdHID = { 0x01, 0x10 },
.bCountryCode = 0,
.bNumDescriptors = 1,
.bReportDescriptorType = UMOUSE_REPORT_DESC_TYPE,
.wItemLength = { sizeof(umouse_report_desc), 0 },
},
.endpd = {
.bLength = sizeof(umouse_confd.endpd),
.bDescriptorType = UDESC_ENDPOINT,
.bEndpointAddress = UE_DIR_IN | UMOUSE_INTR_ENDPT,
.bmAttributes = UE_INTERRUPT,
.wMaxPacketSize[0] = 8,
.bInterval = 0xA,
},
.sscompd = {
.bLength = sizeof(umouse_confd.sscompd),
.bDescriptorType = UDESC_ENDPOINT_SS_COMP,
.bMaxBurst = 0,
.bmAttributes = 0,
MSETW(.wBytesPerInterval, 0),
},
};
struct umouse_bos_desc {
struct usb_bos_descriptor bosd;
struct usb_devcap_ss_descriptor usbssd;
} __packed;
static struct umouse_bos_desc umouse_bosd = {
.bosd = {
.bLength = sizeof(umouse_bosd.bosd),
.bDescriptorType = UDESC_BOS,
HSETW(.wTotalLength, sizeof(umouse_bosd)),
.bNumDeviceCaps = 1,
},
.usbssd = {
.bLength = sizeof(umouse_bosd.usbssd),
.bDescriptorType = UDESC_DEVICE_CAPABILITY,
.bDevCapabilityType = 3,
.bmAttributes = 0,
HSETW(.wSpeedsSupported, 0x08),
.bFunctionalitySupport = 3,
.bU1DevExitLat = 0xa, /* dummy - not used */
.wU2DevExitLat = { 0x20, 0x00 },
}
};
struct umouse_softc {
struct usb_hci *hci;
struct umouse_report um_report;
int newdata;
struct {
uint8_t idle;
uint8_t protocol;
uint8_t feature;
} hid;
pthread_mutex_t mtx;
pthread_mutex_t ev_mtx;
int polling;
struct timeval prev_evt;
};
static void
umouse_event(uint8_t button, int x, int y, void *arg)
{
struct umouse_softc *sc;
struct bhyvegc_image *gc;
gc = console_get_image();
if (gc == NULL) {
/* not ready */
return;
}
sc = arg;
pthread_mutex_lock(&sc->mtx);
sc->um_report.buttons = 0;
sc->um_report.z = 0;
if (button & 0x01)
sc->um_report.buttons |= 0x01; /* left */
if (button & 0x02)
sc->um_report.buttons |= 0x04; /* middle */
if (button & 0x04)
sc->um_report.buttons |= 0x02; /* right */
if (button & 0x8)
sc->um_report.z = 1;
if (button & 0x10)
sc->um_report.z = -1;
/* scale coords to mouse resolution */
sc->um_report.x = MOUSE_MAX_X * x / gc->width;
sc->um_report.y = MOUSE_MAX_Y * y / gc->height;
sc->newdata = 1;
pthread_mutex_unlock(&sc->mtx);
pthread_mutex_lock(&sc->ev_mtx);
sc->hci->hci_intr(sc->hci, UE_DIR_IN | UMOUSE_INTR_ENDPT);
pthread_mutex_unlock(&sc->ev_mtx);
}
static void *
umouse_init(struct usb_hci *hci, nvlist_t *nvl __unused)
{
struct umouse_softc *sc;
sc = calloc(1, sizeof(struct umouse_softc));
sc->hci = hci;
sc->hid.protocol = 1; /* REPORT protocol */
pthread_mutex_init(&sc->mtx, NULL);
pthread_mutex_init(&sc->ev_mtx, NULL);
console_ptr_register(umouse_event, sc, 10);
return (sc);
}
#define UREQ(x,y) ((x) | ((y) << 8))
static int
umouse_request(void *scarg, struct usb_data_xfer *xfer)
{
struct umouse_softc *sc;
struct usb_data_xfer_block *data;
const char *str;
uint16_t value;
uint16_t index;
uint16_t len;
uint16_t slen;
uint8_t *udata;
int err;
int i, idx;
int eshort;
sc = scarg;
data = NULL;
udata = NULL;
idx = xfer->head;
for (i = 0; i < xfer->ndata; i++) {
xfer->data[idx].bdone = 0;
if (data == NULL && USB_DATA_OK(xfer,i)) {
data = &xfer->data[idx];
udata = data->buf;
}
xfer->data[idx].processed = 1;
idx = (idx + 1) % USB_MAX_XFER_BLOCKS;
}
err = USB_ERR_NORMAL_COMPLETION;
eshort = 0;
if (!xfer->ureq) {
DPRINTF(("umouse_request: port %d", sc->hci->hci_port));
goto done;
}
value = UGETW(xfer->ureq->wValue);
index = UGETW(xfer->ureq->wIndex);
len = UGETW(xfer->ureq->wLength);
DPRINTF(("umouse_request: port %d, type 0x%x, req 0x%x, val 0x%x, "
"idx 0x%x, len %u",
sc->hci->hci_port, xfer->ureq->bmRequestType,
xfer->ureq->bRequest, value, index, len));
switch (UREQ(xfer->ureq->bRequest, xfer->ureq->bmRequestType)) {
case UREQ(UR_GET_CONFIG, UT_READ_DEVICE):
DPRINTF(("umouse: (UR_GET_CONFIG, UT_READ_DEVICE)"));
if (!data)
break;
*udata = umouse_confd.confd.bConfigurationValue;
data->blen = len > 0 ? len - 1 : 0;
eshort = data->blen > 0;
data->bdone += 1;
break;
case UREQ(UR_GET_DESCRIPTOR, UT_READ_DEVICE):
DPRINTF(("umouse: (UR_GET_DESCRIPTOR, UT_READ_DEVICE) val %x",
value >> 8));
if (!data)
break;
switch (value >> 8) {
case UDESC_DEVICE:
DPRINTF(("umouse: (->UDESC_DEVICE) len %u ?= "
"sizeof(umouse_dev_desc) %lu",
len, sizeof(umouse_dev_desc)));
if ((value & 0xFF) != 0) {
err = USB_ERR_STALLED;
goto done;
}
if (len > sizeof(umouse_dev_desc)) {
data->blen = len - sizeof(umouse_dev_desc);
len = sizeof(umouse_dev_desc);
} else
data->blen = 0;
memcpy(data->buf, &umouse_dev_desc, len);
data->bdone += len;
break;
case UDESC_CONFIG:
DPRINTF(("umouse: (->UDESC_CONFIG)"));
if ((value & 0xFF) != 0) {
err = USB_ERR_STALLED;
goto done;
}
if (len > sizeof(umouse_confd)) {
data->blen = len - sizeof(umouse_confd);
len = sizeof(umouse_confd);
} else
data->blen = 0;
memcpy(data->buf, &umouse_confd, len);
data->bdone += len;
break;
case UDESC_STRING:
DPRINTF(("umouse: (->UDESC_STRING)"));
str = NULL;
if ((value & 0xFF) < UMSTR_MAX)
str = umouse_desc_strings[value & 0xFF];
else
goto done;
if ((value & 0xFF) == UMSTR_LANG) {
udata[0] = 4;
udata[1] = UDESC_STRING;
data->blen = len - 2;
len -= 2;
data->bdone += 2;
if (len >= 2) {
udata[2] = str[0];
udata[3] = str[1];
data->blen -= 2;
data->bdone += 2;
} else
data->blen = 0;
goto done;
}
slen = 2 + strlen(str) * 2;
udata[0] = slen;
udata[1] = UDESC_STRING;
if (len > slen) {
data->blen = len - slen;
len = slen;
} else
data->blen = 0;
for (i = 2; i < len; i += 2) {
udata[i] = *str++;
udata[i+1] = '\0';
}
data->bdone += slen;
break;
case UDESC_BOS:
DPRINTF(("umouse: USB3 BOS"));
if (len > sizeof(umouse_bosd)) {
data->blen = len - sizeof(umouse_bosd);
len = sizeof(umouse_bosd);
} else
data->blen = 0;
memcpy(udata, &umouse_bosd, len);
data->bdone += len;
break;
default:
DPRINTF(("umouse: unknown(%d)->ERROR", value >> 8));
err = USB_ERR_STALLED;
goto done;
}
eshort = data->blen > 0;
break;
case UREQ(UR_GET_DESCRIPTOR, UT_READ_INTERFACE):
DPRINTF(("umouse: (UR_GET_DESCRIPTOR, UT_READ_INTERFACE) "
"0x%x", (value >> 8)));
if (!data)
break;
switch (value >> 8) {
case UMOUSE_REPORT_DESC_TYPE:
if (len > sizeof(umouse_report_desc)) {
data->blen = len - sizeof(umouse_report_desc);
len = sizeof(umouse_report_desc);
} else
data->blen = 0;
memcpy(data->buf, umouse_report_desc, len);
data->bdone += len;
break;
default:
DPRINTF(("umouse: IO ERROR"));
err = USB_ERR_STALLED;
goto done;
}
eshort = data->blen > 0;
break;
case UREQ(UR_GET_INTERFACE, UT_READ_INTERFACE):
DPRINTF(("umouse: (UR_GET_INTERFACE, UT_READ_INTERFACE)"));
if (index != 0) {
DPRINTF(("umouse get_interface, invalid index %d",
index));
err = USB_ERR_STALLED;
goto done;
}
if (!data)
break;
if (len > 0) {
*udata = 0;
data->blen = len - 1;
}
eshort = data->blen > 0;
data->bdone += 1;
break;
case UREQ(UR_GET_STATUS, UT_READ_DEVICE):
DPRINTF(("umouse: (UR_GET_STATUS, UT_READ_DEVICE)"));
if (data != NULL && len > 1) {
if (sc->hid.feature == UF_DEVICE_REMOTE_WAKEUP)
USETW(udata, UDS_REMOTE_WAKEUP);
else
USETW(udata, 0);
data->blen = len - 2;
data->bdone += 2;
}
eshort = data->blen > 0;
break;
case UREQ(UR_GET_STATUS, UT_READ_INTERFACE):
case UREQ(UR_GET_STATUS, UT_READ_ENDPOINT):
DPRINTF(("umouse: (UR_GET_STATUS, UT_READ_INTERFACE)"));
if (data != NULL && len > 1) {
USETW(udata, 0);
data->blen = len - 2;
data->bdone += 2;
}
eshort = data->blen > 0;
break;
case UREQ(UR_SET_ADDRESS, UT_WRITE_DEVICE):
/* XXX Controller should've handled this */
DPRINTF(("umouse set address %u", value));
break;
case UREQ(UR_SET_CONFIG, UT_WRITE_DEVICE):
DPRINTF(("umouse set config %u", value));
break;
case UREQ(UR_SET_DESCRIPTOR, UT_WRITE_DEVICE):
DPRINTF(("umouse set descriptor %u", value));
break;
case UREQ(UR_CLEAR_FEATURE, UT_WRITE_DEVICE):
DPRINTF(("umouse: (UR_SET_FEATURE, UT_WRITE_DEVICE) %x", value));
if (value == UF_DEVICE_REMOTE_WAKEUP)
sc->hid.feature = 0;
break;
case UREQ(UR_SET_FEATURE, UT_WRITE_DEVICE):
DPRINTF(("umouse: (UR_SET_FEATURE, UT_WRITE_DEVICE) %x", value));
if (value == UF_DEVICE_REMOTE_WAKEUP)
sc->hid.feature = UF_DEVICE_REMOTE_WAKEUP;
break;
case UREQ(UR_CLEAR_FEATURE, UT_WRITE_INTERFACE):
case UREQ(UR_CLEAR_FEATURE, UT_WRITE_ENDPOINT):
case UREQ(UR_SET_FEATURE, UT_WRITE_INTERFACE):
case UREQ(UR_SET_FEATURE, UT_WRITE_ENDPOINT):
DPRINTF(("umouse: (UR_CLEAR_FEATURE, UT_WRITE_INTERFACE)"));
err = USB_ERR_STALLED;
goto done;
case UREQ(UR_SET_INTERFACE, UT_WRITE_INTERFACE):
DPRINTF(("umouse set interface %u", value));
break;
case UREQ(UR_ISOCH_DELAY, UT_WRITE_DEVICE):
DPRINTF(("umouse set isoch delay %u", value));
break;
case UREQ(UR_SET_SEL, 0):
DPRINTF(("umouse set sel"));
break;
case UREQ(UR_SYNCH_FRAME, UT_WRITE_ENDPOINT):
DPRINTF(("umouse synch frame"));
break;
/* HID device requests */
case UREQ(UMOUSE_GET_REPORT, UT_READ_CLASS_INTERFACE):
DPRINTF(("umouse: (UMOUSE_GET_REPORT, UT_READ_CLASS_INTERFACE) "
"0x%x", (value >> 8)));
if (!data)
break;
if ((value >> 8) == 0x01 && len >= sizeof(sc->um_report)) {
/* TODO read from backend */
if (len > sizeof(sc->um_report)) {
data->blen = len - sizeof(sc->um_report);
len = sizeof(sc->um_report);
} else
data->blen = 0;
memcpy(data->buf, &sc->um_report, len);
data->bdone += len;
} else {
err = USB_ERR_STALLED;
goto done;
}
eshort = data->blen > 0;
break;
case UREQ(UMOUSE_GET_IDLE, UT_READ_CLASS_INTERFACE):
if (data != NULL && len > 0) {
*udata = sc->hid.idle;
data->blen = len - 1;
data->bdone += 1;
}
eshort = data->blen > 0;
break;
case UREQ(UMOUSE_GET_PROTOCOL, UT_READ_CLASS_INTERFACE):
if (data != NULL && len > 0) {
*udata = sc->hid.protocol;
data->blen = len - 1;
data->bdone += 1;
}
eshort = data->blen > 0;
break;
case UREQ(UMOUSE_SET_REPORT, UT_WRITE_CLASS_INTERFACE):
DPRINTF(("umouse: (UMOUSE_SET_REPORT, UT_WRITE_CLASS_INTERFACE) ignored"));
break;
case UREQ(UMOUSE_SET_IDLE, UT_WRITE_CLASS_INTERFACE):
sc->hid.idle = UGETW(xfer->ureq->wValue) >> 8;
DPRINTF(("umouse: (UMOUSE_SET_IDLE, UT_WRITE_CLASS_INTERFACE) %x",
sc->hid.idle));
break;
case UREQ(UMOUSE_SET_PROTOCOL, UT_WRITE_CLASS_INTERFACE):
sc->hid.protocol = UGETW(xfer->ureq->wValue) >> 8;
DPRINTF(("umouse: (UR_CLEAR_FEATURE, UT_WRITE_CLASS_INTERFACE) %x",
sc->hid.protocol));
break;
default:
DPRINTF(("**** umouse request unhandled"));
err = USB_ERR_STALLED;
break;
}
done:
if (xfer->ureq && (xfer->ureq->bmRequestType & UT_WRITE) &&
(err == USB_ERR_NORMAL_COMPLETION) && (data != NULL))
data->blen = 0;
else if (eshort)
err = USB_ERR_SHORT_XFER;
DPRINTF(("umouse request error code %d (0=ok), blen %u txlen %u",
err, (data ? data->blen : 0), (data ? data->bdone : 0)));
return (err);
}
static int
umouse_data_handler(void *scarg, struct usb_data_xfer *xfer, int dir,
int epctx)
{
struct umouse_softc *sc;
struct usb_data_xfer_block *data;
uint8_t *udata;
int len, i, idx;
int err;
DPRINTF(("umouse handle data - DIR=%s|EP=%d, blen %d",
dir ? "IN" : "OUT", epctx, xfer->data[0].blen));
/* find buffer to add data */
udata = NULL;
err = USB_ERR_NORMAL_COMPLETION;
/* handle xfer at first unprocessed item with buffer */
data = NULL;
idx = xfer->head;
for (i = 0; i < xfer->ndata; i++) {
data = &xfer->data[idx];
if (data->buf != NULL && data->blen != 0) {
break;
} else {
data->processed = 1;
data = NULL;
}
idx = (idx + 1) % USB_MAX_XFER_BLOCKS;
}
if (!data)
goto done;
udata = data->buf;
len = data->blen;
if (udata == NULL) {
DPRINTF(("umouse no buffer provided for input"));
err = USB_ERR_NOMEM;
goto done;
}
sc = scarg;
if (dir) {
pthread_mutex_lock(&sc->mtx);
if (!sc->newdata) {
err = USB_ERR_CANCELLED;
USB_DATA_SET_ERRCODE(&xfer->data[xfer->head], USB_NAK);
pthread_mutex_unlock(&sc->mtx);
goto done;
}
if (sc->polling) {
err = USB_ERR_STALLED;
USB_DATA_SET_ERRCODE(data, USB_STALL);
pthread_mutex_unlock(&sc->mtx);
goto done;
}
sc->polling = 1;
if (len > 0) {
sc->newdata = 0;
data->processed = 1;
data->bdone += 6;
memcpy(udata, &sc->um_report, 6);
data->blen = len - 6;
if (data->blen > 0)
err = USB_ERR_SHORT_XFER;
}
sc->polling = 0;
pthread_mutex_unlock(&sc->mtx);
} else {
USB_DATA_SET_ERRCODE(data, USB_STALL);
err = USB_ERR_STALLED;
}
done:
return (err);
}
static int
umouse_reset(void *scarg)
{
struct umouse_softc *sc;
sc = scarg;
sc->newdata = 0;
return (0);
}
static int
umouse_remove(void *scarg __unused)
{
return (0);
}
static int
umouse_stop(void *scarg __unused)
{
return (0);
}
Initial support for bhyve save and restore. Save and restore (also known as suspend and resume) permits a snapshot to be taken of a guest's state that can later be resumed. In the current implementation, bhyve(8) creates a UNIX domain socket that is used by bhyvectl(8) to send a request to save a snapshot (and optionally exit after the snapshot has been taken). A snapshot currently consists of two files: the first holds a copy of guest RAM, and the second file holds other guest state such as vCPU register values and device model state. To resume a guest, bhyve(8) must be started with a matching pair of command line arguments to instantiate the same set of device models as well as a pointer to the saved snapshot. While the current implementation is useful for several uses cases, it has a few limitations. The file format for saving the guest state is tied to the ABI of internal bhyve structures and is not self-describing (in that it does not communicate the set of device models present in the system). In addition, the state saved for some device models closely matches the internal data structures which might prove a challenge for compatibility of snapshot files across a range of bhyve versions. The file format also does not currently support versioning of individual chunks of state. As a result, the current file format is not a fixed binary format and future revisions to save and restore will break binary compatiblity of snapshot files. The goal is to move to a more flexible format that adds versioning, etc. and at that point to commit to providing a reasonable level of compatibility. As a result, the current implementation is not enabled by default. It can be enabled via the WITH_BHYVE_SNAPSHOT=yes option for userland builds, and the kernel option BHYVE_SHAPSHOT. Submitted by: Mihai Tiganus, Flavius Anton, Darius Mihai Submitted by: Elena Mihailescu, Mihai Carabas, Sergiu Weisz Relnotes: yes Sponsored by: University Politehnica of Bucharest Sponsored by: Matthew Grooms (student scholarships) Sponsored by: iXsystems Differential Revision: https://reviews.freebsd.org/D19495
2020-05-05 00:02:04 +00:00
#ifdef BHYVE_SNAPSHOT
static int
umouse_snapshot(void *scarg, struct vm_snapshot_meta *meta)
{
int ret;
struct umouse_softc *sc;
sc = scarg;
SNAPSHOT_VAR_OR_LEAVE(sc->um_report, meta, ret, done);
SNAPSHOT_VAR_OR_LEAVE(sc->newdata, meta, ret, done);
SNAPSHOT_VAR_OR_LEAVE(sc->hid.idle, meta, ret, done);
SNAPSHOT_VAR_OR_LEAVE(sc->hid.protocol, meta, ret, done);
SNAPSHOT_VAR_OR_LEAVE(sc->hid.feature, meta, ret, done);
SNAPSHOT_VAR_OR_LEAVE(sc->polling, meta, ret, done);
SNAPSHOT_VAR_OR_LEAVE(sc->prev_evt.tv_sec, meta, ret, done);
SNAPSHOT_VAR_OR_LEAVE(sc->prev_evt.tv_usec, meta, ret, done);
done:
return (ret);
}
#endif
static struct usb_devemu ue_mouse = {
.ue_emu = "tablet",
.ue_usbver = 3,
.ue_usbspeed = USB_SPEED_HIGH,
.ue_init = umouse_init,
.ue_request = umouse_request,
.ue_data = umouse_data_handler,
.ue_reset = umouse_reset,
.ue_remove = umouse_remove,
Initial support for bhyve save and restore. Save and restore (also known as suspend and resume) permits a snapshot to be taken of a guest's state that can later be resumed. In the current implementation, bhyve(8) creates a UNIX domain socket that is used by bhyvectl(8) to send a request to save a snapshot (and optionally exit after the snapshot has been taken). A snapshot currently consists of two files: the first holds a copy of guest RAM, and the second file holds other guest state such as vCPU register values and device model state. To resume a guest, bhyve(8) must be started with a matching pair of command line arguments to instantiate the same set of device models as well as a pointer to the saved snapshot. While the current implementation is useful for several uses cases, it has a few limitations. The file format for saving the guest state is tied to the ABI of internal bhyve structures and is not self-describing (in that it does not communicate the set of device models present in the system). In addition, the state saved for some device models closely matches the internal data structures which might prove a challenge for compatibility of snapshot files across a range of bhyve versions. The file format also does not currently support versioning of individual chunks of state. As a result, the current file format is not a fixed binary format and future revisions to save and restore will break binary compatiblity of snapshot files. The goal is to move to a more flexible format that adds versioning, etc. and at that point to commit to providing a reasonable level of compatibility. As a result, the current implementation is not enabled by default. It can be enabled via the WITH_BHYVE_SNAPSHOT=yes option for userland builds, and the kernel option BHYVE_SHAPSHOT. Submitted by: Mihai Tiganus, Flavius Anton, Darius Mihai Submitted by: Elena Mihailescu, Mihai Carabas, Sergiu Weisz Relnotes: yes Sponsored by: University Politehnica of Bucharest Sponsored by: Matthew Grooms (student scholarships) Sponsored by: iXsystems Differential Revision: https://reviews.freebsd.org/D19495
2020-05-05 00:02:04 +00:00
.ue_stop = umouse_stop,
#ifdef BHYVE_SNAPSHOT
.ue_snapshot = umouse_snapshot,
#endif
};
USB_EMUL_SET(ue_mouse);