freebsd-dev/usr.sbin/bhyve/pci_uart.c

627 lines
13 KiB
C
Raw Normal View History

/*-
* Copyright (c) 2012 NetApp, Inc.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY NETAPP, INC ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL NETAPP, INC OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* $FreeBSD$
*/
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
#include <sys/types.h>
#include <sys/select.h>
#include <dev/ic/ns16550.h>
#include <stdio.h>
#include <stdlib.h>
#include <assert.h>
#include <termios.h>
#include <unistd.h>
#include <stdbool.h>
#include <string.h>
#include <pthread.h>
#include "bhyverun.h"
#include "pci_emul.h"
#include "mevent.h"
#define COM1_BASE 0x3F8
#define COM1_IRQ 4
#define COM2_BASE 0x2F8
#define COM2_IRQ 3
#define DEFAULT_RCLK 1843200
#define DEFAULT_BAUD 9600
#define FCR_RX_MASK 0xC0
#define MCR_OUT1 0x04
#define MCR_OUT2 0x08
#define MSR_DELTA_MASK 0x0f
#ifndef REG_SCR
#define REG_SCR com_scr
#endif
#define FIFOSZ 16
/*
* Pick a PCI vid/did of a chip with a single uart at
* BAR0, that most versions of FreeBSD can understand:
* Siig CyberSerial 1-port.
*/
#define COM_VENDOR 0x131f
#define COM_DEV 0x2000
static int pci_uart_stdio; /* stdio in use for i/o */
static int pci_uart_nldevs; /* number of legacy devices - 2 max */
static struct {
uint64_t baddr;
int vector;
} pci_uart_lres[] = {
{ COM1_BASE, COM1_IRQ},
{ COM2_BASE, COM2_IRQ},
{ 0, 0 }
};
struct fifo {
uint8_t buf[FIFOSZ];
int rindex; /* index to read from */
int windex; /* index to write to */
int num; /* number of characters in the fifo */
int size; /* size of the fifo */
};
struct pci_uart_softc {
struct pci_devinst *pi;
pthread_mutex_t mtx; /* protects all softc elements */
uint8_t data; /* Data register (R/W) */
uint8_t ier; /* Interrupt enable register (R/W) */
uint8_t lcr; /* Line control register (R/W) */
uint8_t mcr; /* Modem control register (R/W) */
uint8_t lsr; /* Line status register (R/W) */
uint8_t msr; /* Modem status register (R/W) */
uint8_t fcr; /* FIFO control register (W) */
uint8_t scr; /* Scratch register (R/W) */
uint8_t dll; /* Baudrate divisor latch LSB */
uint8_t dlh; /* Baudrate divisor latch MSB */
struct fifo rxfifo;
int opened;
int stdio;
bool thre_int_pending; /* THRE interrupt pending */
};
static void pci_uart_drain(int fd, enum ev_type ev, void *arg);
static struct termios tio_orig, tio_new; /* I/O Terminals */
static void
ttyclose(void)
{
tcsetattr(STDIN_FILENO, TCSANOW, &tio_orig);
}
static void
ttyopen(void)
{
tcgetattr(STDIN_FILENO, &tio_orig);
cfmakeraw(&tio_new);
tcsetattr(STDIN_FILENO, TCSANOW, &tio_new);
atexit(ttyclose);
}
static bool
tty_char_available(void)
{
fd_set rfds;
struct timeval tv;
FD_ZERO(&rfds);
FD_SET(STDIN_FILENO, &rfds);
tv.tv_sec = 0;
tv.tv_usec = 0;
if (select(STDIN_FILENO + 1, &rfds, NULL, NULL, &tv) > 0 ) {
return (true);
} else {
return (false);
}
}
static int
ttyread(void)
{
char rb;
if (tty_char_available()) {
read(STDIN_FILENO, &rb, 1);
return (rb & 0xff);
} else {
return (-1);
}
}
static void
ttywrite(unsigned char wb)
{
(void) write(STDIN_FILENO, &wb, 1);
}
static void
fifo_reset(struct fifo *fifo, int size)
{
bzero(fifo, sizeof(struct fifo));
fifo->size = size;
}
static int
fifo_putchar(struct fifo *fifo, uint8_t ch)
{
if (fifo->num < fifo->size) {
fifo->buf[fifo->windex] = ch;
fifo->windex = (fifo->windex + 1) % fifo->size;
fifo->num++;
return (0);
} else
return (-1);
}
static int
fifo_getchar(struct fifo *fifo)
{
int c;
if (fifo->num > 0) {
c = fifo->buf[fifo->rindex];
fifo->rindex = (fifo->rindex + 1) % fifo->size;
fifo->num--;
return (c);
} else
return (-1);
}
static int
fifo_numchars(struct fifo *fifo)
{
return (fifo->num);
}
static int
fifo_available(struct fifo *fifo)
{
return (fifo->num < fifo->size);
}
static void
pci_uart_opentty(struct pci_uart_softc *sc)
{
struct mevent *mev;
assert(sc->opened == 0);
assert(sc->stdio);
ttyopen();
mev = mevent_add(STDIN_FILENO, EVF_READ, pci_uart_drain, sc);
assert(mev);
}
static void
pci_uart_legacy_res(uint64_t *bar, int *ivec)
{
if (pci_uart_lres[pci_uart_nldevs].baddr != 0) {
*bar = pci_uart_lres[pci_uart_nldevs].baddr;
*ivec = pci_uart_lres[pci_uart_nldevs].vector;
pci_uart_nldevs++;
} else {
/* TODO: print warning ? */
*bar = 0;
*ivec= -1;
}
}
/*
* The IIR returns a prioritized interrupt reason:
* - receive data available
* - transmit holding register empty
* - modem status change
*
* Return an interrupt reason if one is available.
*/
static int
pci_uart_intr_reason(struct pci_uart_softc *sc)
{
if ((sc->lsr & LSR_OE) != 0 && (sc->ier & IER_ERLS) != 0)
return (IIR_RLS);
else if (fifo_numchars(&sc->rxfifo) > 0 && (sc->ier & IER_ERXRDY) != 0)
return (IIR_RXTOUT);
else if (sc->thre_int_pending && (sc->ier & IER_ETXRDY) != 0)
return (IIR_TXRDY);
else if ((sc->msr & MSR_DELTA_MASK) != 0 && (sc->ier & IER_EMSC) != 0)
return (IIR_MLSC);
else
return (IIR_NOPEND);
}
static void
pci_uart_reset(struct pci_uart_softc *sc)
{
uint16_t divisor;
divisor = DEFAULT_RCLK / DEFAULT_BAUD / 16;
sc->dll = divisor;
sc->dlh = divisor >> 16;
fifo_reset(&sc->rxfifo, 1); /* no fifo until enabled by software */
}
/*
* Toggle the COM port's intr pin depending on whether or not we have an
* interrupt condition to report to the processor.
*/
static void
pci_uart_toggle_intr(struct pci_uart_softc *sc)
{
uint8_t intr_reason;
intr_reason = pci_uart_intr_reason(sc);
if (intr_reason == IIR_NOPEND)
pci_lintr_deassert(sc->pi);
else
pci_lintr_assert(sc->pi);
}
static void
pci_uart_drain(int fd, enum ev_type ev, void *arg)
{
struct pci_uart_softc *sc;
int ch;
sc = arg;
assert(fd == STDIN_FILENO);
assert(ev == EVF_READ);
/*
* This routine is called in the context of the mevent thread
* to take out the softc lock to protect against concurrent
* access from a vCPU i/o exit
*/
pthread_mutex_lock(&sc->mtx);
if ((sc->mcr & MCR_LOOPBACK) != 0) {
(void) ttyread();
} else {
while (fifo_available(&sc->rxfifo) &&
((ch = ttyread()) != -1)) {
fifo_putchar(&sc->rxfifo, ch);
}
pci_uart_toggle_intr(sc);
}
pthread_mutex_unlock(&sc->mtx);
}
static void
pci_uart_write(struct vmctx *ctx, int vcpu, struct pci_devinst *pi,
int baridx, uint64_t offset, int size, uint64_t value)
{
struct pci_uart_softc *sc;
int fifosz;
uint8_t msr;
sc = pi->pi_arg;
assert(baridx == 0);
assert(size == 1);
/* Open terminal */
if (!sc->opened && sc->stdio) {
pci_uart_opentty(sc);
sc->opened = 1;
}
pthread_mutex_lock(&sc->mtx);
/*
* Take care of the special case DLAB accesses first
*/
if ((sc->lcr & LCR_DLAB) != 0) {
if (offset == REG_DLL) {
sc->dll = value;
goto done;
}
if (offset == REG_DLH) {
sc->dlh = value;
goto done;
}
}
switch (offset) {
case REG_DATA:
if (sc->mcr & MCR_LOOPBACK) {
if (fifo_putchar(&sc->rxfifo, value) != 0)
sc->lsr |= LSR_OE;
} else if (sc->stdio) {
ttywrite(value);
} /* else drop on floor */
sc->thre_int_pending = true;
break;
case REG_IER:
/*
* Apply mask so that bits 4-7 are 0
* Also enables bits 0-3 only if they're 1
*/
sc->ier = value & 0x0F;
break;
case REG_FCR:
/*
* When moving from FIFO and 16450 mode and vice versa,
* the FIFO contents are reset.
*/
if ((sc->fcr & FCR_ENABLE) ^ (value & FCR_ENABLE)) {
fifosz = (value & FCR_ENABLE) ? FIFOSZ : 1;
fifo_reset(&sc->rxfifo, fifosz);
}
/*
* The FCR_ENABLE bit must be '1' for the programming
* of other FCR bits to be effective.
*/
if ((value & FCR_ENABLE) == 0) {
sc->fcr = 0;
} else {
if ((value & FCR_RCV_RST) != 0)
fifo_reset(&sc->rxfifo, FIFOSZ);
sc->fcr = value &
(FCR_ENABLE | FCR_DMA | FCR_RX_MASK);
}
break;
case REG_LCR:
sc->lcr = value;
break;
case REG_MCR:
/* Apply mask so that bits 5-7 are 0 */
sc->mcr = value & 0x1F;
msr = 0;
if (sc->mcr & MCR_LOOPBACK) {
/*
* In the loopback mode certain bits from the
* MCR are reflected back into MSR
*/
if (sc->mcr & MCR_RTS)
msr |= MSR_CTS;
if (sc->mcr & MCR_DTR)
msr |= MSR_DSR;
if (sc->mcr & MCR_OUT1)
msr |= MSR_RI;
if (sc->mcr & MCR_OUT2)
msr |= MSR_DCD;
}
/*
* Detect if there has been any change between the
* previous and the new value of MSR. If there is
* then assert the appropriate MSR delta bit.
*/
if ((msr & MSR_CTS) ^ (sc->msr & MSR_CTS))
sc->msr |= MSR_DCTS;
if ((msr & MSR_DSR) ^ (sc->msr & MSR_DSR))
sc->msr |= MSR_DDSR;
if ((msr & MSR_DCD) ^ (sc->msr & MSR_DCD))
sc->msr |= MSR_DDCD;
if ((sc->msr & MSR_RI) != 0 && (msr & MSR_RI) == 0)
sc->msr |= MSR_TERI;
/*
* Update the value of MSR while retaining the delta
* bits.
*/
sc->msr &= MSR_DELTA_MASK;
sc->msr |= msr;
break;
case REG_LSR:
/*
* Line status register is not meant to be written to
* during normal operation.
*/
break;
case REG_MSR:
/*
* As far as I can tell MSR is a read-only register.
*/
break;
case REG_SCR:
sc->scr = value;
break;
default:
break;
}
done:
pci_uart_toggle_intr(sc);
pthread_mutex_unlock(&sc->mtx);
}
uint64_t
pci_uart_read(struct vmctx *ctx, int vcpu, struct pci_devinst *pi,
int baridx, uint64_t offset, int size)
{
struct pci_uart_softc *sc;
uint8_t iir, intr_reason;
uint64_t reg;
sc = pi->pi_arg;
assert(baridx == 0);
assert(size == 1);
/* Open terminal */
if (!sc->opened && sc->stdio) {
pci_uart_opentty(sc);
sc->opened = 1;
}
pthread_mutex_lock(&sc->mtx);
/*
* Take care of the special case DLAB accesses first
*/
if ((sc->lcr & LCR_DLAB) != 0) {
if (offset == REG_DLL) {
reg = sc->dll;
goto done;
}
if (offset == REG_DLH) {
reg = sc->dlh;
goto done;
}
}
switch (offset) {
case REG_DATA:
reg = fifo_getchar(&sc->rxfifo);
break;
case REG_IER:
reg = sc->ier;
break;
case REG_IIR:
iir = (sc->fcr & FCR_ENABLE) ? IIR_FIFO_MASK : 0;
intr_reason = pci_uart_intr_reason(sc);
/*
* Deal with side effects of reading the IIR register
*/
if (intr_reason == IIR_TXRDY)
sc->thre_int_pending = false;
iir |= intr_reason;
reg = iir;
break;
case REG_LCR:
reg = sc->lcr;
break;
case REG_MCR:
reg = sc->mcr;
break;
case REG_LSR:
/* Transmitter is always ready for more data */
sc->lsr |= LSR_TEMT | LSR_THRE;
/* Check for new receive data */
if (fifo_numchars(&sc->rxfifo) > 0)
sc->lsr |= LSR_RXRDY;
else
sc->lsr &= ~LSR_RXRDY;
reg = sc->lsr;
/* The LSR_OE bit is cleared on LSR read */
sc->lsr &= ~LSR_OE;
break;
case REG_MSR:
/*
* MSR delta bits are cleared on read
*/
reg = sc->msr;
sc->msr &= ~MSR_DELTA_MASK;
break;
case REG_SCR:
reg = sc->scr;
break;
default:
reg = 0xFF;
break;
}
done:
pci_uart_toggle_intr(sc);
pthread_mutex_unlock(&sc->mtx);
return (reg);
}
static int
pci_uart_init(struct vmctx *ctx, struct pci_devinst *pi, char *opts)
{
struct pci_uart_softc *sc;
uint64_t bar;
int ivec;
sc = malloc(sizeof(struct pci_uart_softc));
memset(sc, 0, sizeof(struct pci_uart_softc));
pi->pi_arg = sc;
sc->pi = pi;
pthread_mutex_init(&sc->mtx, NULL);
/* initialize config space */
pci_set_cfgdata16(pi, PCIR_DEVICE, COM_DEV);
pci_set_cfgdata16(pi, PCIR_VENDOR, COM_VENDOR);
pci_set_cfgdata8(pi, PCIR_CLASS, PCIC_SIMPLECOMM);
if (pci_is_legacy(pi)) {
pci_uart_legacy_res(&bar, &ivec);
pci_emul_alloc_pbar(pi, 0, bar, PCIBAR_IO, 8);
} else {
ivec = -1;
pci_emul_alloc_bar(pi, 0, PCIBAR_IO, 8);
}
pci_lintr_request(pi, ivec);
if (opts != NULL && !strcmp("stdio", opts) && !pci_uart_stdio) {
pci_uart_stdio = 1;
sc->stdio = 1;
}
pci_uart_reset(sc);
return (0);
}
struct pci_devemu pci_de_com = {
.pe_emu = "uart",
.pe_init = pci_uart_init,
.pe_barwrite = pci_uart_write,
.pe_barread = pci_uart_read
};
PCI_EMUL_SET(pci_de_com);