freebsd-dev/sys/amd64/conf/GENERIC

374 lines
15 KiB
Plaintext
Raw Normal View History

#
# GENERIC -- Generic kernel configuration file for FreeBSD/amd64
#
# For more information on this file, please read the config(5) manual page,
# and/or the handbook section on Kernel Configuration Files:
#
# https://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig-config.html
#
# The handbook is also available locally in /usr/share/doc/handbook
# if you've installed the doc distribution, otherwise always see the
# FreeBSD World Wide Web server (https://www.FreeBSD.org/) for the
# latest information.
#
# An exhaustive list of options and more detailed explanations of the
2004-01-30 03:02:45 +00:00
# device lines is also present in the ../../conf/NOTES and NOTES files.
# If you are in doubt as to the purpose or necessity of a line, check first
# in NOTES.
#
1999-08-28 01:08:13 +00:00
# $FreeBSD$
cpu HAMMER
ident GENERIC
makeoptions DEBUG=-g # Build kernel with gdb(1) debug symbols
makeoptions WITH_CTF=1 # Run ctfconvert(1) for DTrace support
2003-06-01 20:26:38 +00:00
options SCHED_ULE # ULE scheduler
options NUMA # Non-Uniform Memory Architecture support
options PREEMPTION # Enable kernel thread preemption
options VIMAGE # Subsystem virtualization, e.g. VNET
2004-01-30 03:02:45 +00:00
options INET # InterNETworking
options INET6 # IPv6 communications protocols
options IPSEC_SUPPORT # Allow kldload of ipsec and tcpmd5
options TCP_OFFLOAD # TCP offload
options TCP_BLACKBOX # Enhanced TCP event logging
options TCP_HHOOK # hhook(9) framework for TCP
options TCP_RFC7413 # TCP Fast Open
options SCTP # Stream Control Transmission Protocol
2004-01-30 03:02:45 +00:00
options FFS # Berkeley Fast Filesystem
options SOFTUPDATES # Enable FFS soft updates support
options UFS_ACL # Support for access control lists
options UFS_DIRHASH # Improve performance on big directories
2007-04-10 21:40:13 +00:00
options UFS_GJOURNAL # Enable gjournal-based UFS journaling
options QUOTA # Enable disk quotas for UFS
2004-01-30 03:02:45 +00:00
options MD_ROOT # MD is a potential root device
options NFSCL # Network Filesystem Client
options NFSD # Network Filesystem Server
options NFSLOCKD # Network Lock Manager
options NFS_ROOT # NFS usable as /, requires NFSCL
2004-01-30 03:02:45 +00:00
options MSDOSFS # MSDOS Filesystem
options CD9660 # ISO 9660 Filesystem
options PROCFS # Process filesystem (requires PSEUDOFS)
options PSEUDOFS # Pseudo-filesystem framework
options GEOM_RAID # Soft RAID functionality.
options GEOM_LABEL # Provides labelization
options EFIRT # EFI Runtime Services support
options COMPAT_FREEBSD32 # Compatible with i386 binaries
2004-01-30 03:02:45 +00:00
options COMPAT_FREEBSD4 # Compatible with FreeBSD4
options COMPAT_FREEBSD5 # Compatible with FreeBSD5
2006-09-26 12:36:34 +00:00
options COMPAT_FREEBSD6 # Compatible with FreeBSD6
options COMPAT_FREEBSD7 # Compatible with FreeBSD7
options COMPAT_FREEBSD9 # Compatible with FreeBSD9
options COMPAT_FREEBSD10 # Compatible with FreeBSD10
options COMPAT_FREEBSD11 # Compatible with FreeBSD11
options COMPAT_FREEBSD12 # Compatible with FreeBSD12
options SCSI_DELAY=5000 # Delay (in ms) before probing SCSI
2004-01-30 03:02:45 +00:00
options KTRACE # ktrace(1) support
options STACK # stack(9) support
2004-01-30 03:02:45 +00:00
options SYSVSHM # SYSV-style shared memory
options SYSVMSG # SYSV-style message queues
options SYSVSEM # SYSV-style semaphores
options _KPOSIX_PRIORITY_SCHEDULING # POSIX P1003_1B real-time extensions
options PRINTF_BUFR_SIZE=128 # Prevent printf output being interspersed.
options KBD_INSTALL_CDEV # install a CDEV entry in /dev
options HWPMC_HOOKS # Necessary kernel hooks for hwpmc(4)
options AUDIT # Security event auditing
options CAPABILITY_MODE # Capsicum capability mode
options CAPABILITIES # Capsicum capabilities
options MAC # TrustedBSD MAC Framework
options KDTRACE_FRAME # Ensure frames are compiled in
options KDTRACE_HOOKS # Kernel DTrace hooks
options DDB_CTF # Kernel ELF linker loads CTF data
options INCLUDE_CONFIG_FILE # Include this file in kernel
options RACCT # Resource accounting framework
options RACCT_DEFAULT_TO_DISABLED # Set kern.racct.enable=0 by default
options RCTL # Resource limits
# Debugging support. Always need this:
options KDB # Enable kernel debugger support.
options KDB_TRACE # Print a stack trace for a panic.
# For full debugger support use (turn off in stable branch):
options BUF_TRACKING # Track buffer history
options DDB # Support DDB.
options FULL_BUF_TRACKING # Track more buffer history
options GDB # Support remote GDB.
options DEADLKRES # Enable the deadlock resolver
options INVARIANTS # Enable calls of extra sanity checking
options INVARIANT_SUPPORT # Extra sanity checks of internal structures, required by INVARIANTS
options WITNESS # Enable checks to detect deadlocks and cycles
options WITNESS_SKIPSPIN # Don't run witness on spinlocks for speed
options MALLOC_DEBUG_MAXZONES=8 # Separate malloc(9) zones
options VERBOSE_SYSINIT=0 # Support debug.verbose_sysinit, off by default
# Kernel Sanitizers
#options COVERAGE # Generic kernel coverage. Used by KCOV
#options KCOV # Kernel Coverage Sanitizer
# Warning: KUBSAN can result in a kernel too large for loader to load
#options KUBSAN # Kernel Undefined Behavior Sanitizer
# Kernel dump features.
options EKCD # Support for encrypted kernel dumps
options GZIO # gzip-compressed kernel and user dumps
options ZSTDIO # zstd-compressed kernel and user dumps
options NETDUMP # netdump(4) client support
# Make an SMP-capable kernel by default
options SMP # Symmetric MultiProcessor Kernel
options EARLY_AP_STARTUP
# CPU frequency control
device cpufreq
# Bus support.
2003-11-08 03:17:36 +00:00
device acpi
Import the driver for VT-d DMAR hardware, as specified in the revision 1.3 of Intelб╝ Virtualization Technology for Directed I/O Architecture Specification. The Extended Context and PASIDs from the rev. 2.2 are not supported, but I am not aware of any released hardware which implements them. Code does not use queued invalidation, see comments for the reason, and does not provide interrupt remapping services. Code implements the management of the guest address space per domain and allows to establish and tear down arbitrary mappings, but not partial unmapping. The superpages are created as needed, but not promoted. Faults are recorded, fault records could be obtained programmatically, and printed on the console. Implement the busdma(9) using DMARs. This busdma backend avoids bouncing and provides security against misbehaving hardware and driver bad programming, preventing leaks and corruption of the memory by wild DMA accesses. By default, the implementation is compiled into amd64 GENERIC kernel but disabled; to enable, set hw.dmar.enable=1 loader tunable. Code is written to work on i386, but testing there was low priority, and driver is not enabled in GENERIC. Even with the DMAR turned on, individual devices could be directed to use the bounce busdma with the hw.busdma.pci<domain>:<bus>:<device>:<function>.bounce=1 tunable. If DMARs are capable of the pass-through translations, it is used, otherwise, an identity-mapping page table is constructed. The driver was tested on Xeon 5400/5500 chipset legacy machine, Haswell desktop and E5 SandyBridge dual-socket boxes, with ahci(4), ata(4), bce(4), ehci(4), mfi(4), uhci(4), xhci(4) devices. It also works with em(4) and igb(4), but there some fixes are needed for drivers, which are not committed yet. Intel GPUs do not work with DMAR (yet). Many thanks to John Baldwin, who explained me the newbus integration; Peter Holm, who did all testing and helped me to discover and understand several incredible bugs; and to Jim Harris for the access to the EDS and BWG and for listening when I have to explain my findings to somebody. Sponsored by: The FreeBSD Foundation MFC after: 1 month
2013-10-28 13:33:29 +00:00
options ACPI_DMAR
2002-07-23 06:38:47 +00:00
device pci
Native PCI-express HotPlug support. PCI-express HotPlug support is implemented via bits in the slot registers of the PCI-express capability of the downstream port along with an interrupt that triggers when bits in the slot status register change. This is implemented for FreeBSD by adding HotPlug support to the PCI-PCI bridge driver which attaches to the virtual PCI-PCI bridges representing downstream ports on HotPlug slots. The PCI-PCI bridge driver registers an interrupt handler to receive HotPlug events. It also uses the slot registers to determine the current HotPlug state and drive an internal HotPlug state machine. For simplicty of implementation, the PCI-PCI bridge device detaches and deletes the child PCI device when a card is removed from a slot and creates and attaches a PCI child device when a card is inserted into the slot. The PCI-PCI bridge driver provides a bus_child_present which claims that child devices are present on HotPlug-capable slots only when a card is inserted. Rather than requiring a timeout in the RC for config accesses to not-present children, the pcib_read/write_config methods fail all requests when a card is not present (or not yet ready). These changes include support for various optional HotPlug capabilities such as a power controller, mechanical latch, electro-mechanical interlock, indicators, and an attention button. It also includes support for devices which require waiting for command completion events before initiating a subsequent HotPlug command. However, it has only been tested on ExpressCard systems which support surprise removal and have none of these optional capabilities. PCI-express HotPlug support is conditional on the PCI_HP option which is enabled by default on arm64, x86, and powerpc. Reviewed by: adrian, imp, vangyzen (older versions) Relnotes: yes Differential Revision: https://reviews.freebsd.org/D6136
2016-05-05 22:26:23 +00:00
options PCI_HP # PCI-Express native HotPlug
options PCI_IOV # PCI SR-IOV support
# Floppy drives
device fdc
# ATA controllers
device ahci # AHCI-compatible SATA controllers
device ata # Legacy ATA/SATA controllers
device mvs # Marvell 88SX50XX/88SX60XX/88SX70XX/SoC SATA
device siis # SiliconImage SiI3124/SiI3132/SiI3531 SATA
# SCSI Controllers
device ahc # AHA2940 and onboard AIC7xxx devices
device ahd # AHA39320/29320 and onboard AIC79xx devices
device esp # AMD Am53C974 (Tekram DC-390(T))
device hptiop # Highpoint RocketRaid 3xxx series
device isp # Qlogic family
#device ispfw # Firmware for QLogic HBAs- normally a module
device mpt # LSI-Logic MPT-Fusion
device mps # LSI-Logic MPT-Fusion 2
device mpr # LSI-Logic MPT-Fusion 3
device sym # NCR/Symbios Logic
device trm # Tekram DC395U/UW/F DC315U adapters
device isci # Intel C600 SAS controller
device ocs_fc # Emulex FC adapters
# ATA/SCSI peripherals
device scbus # SCSI bus (required for ATA/SCSI)
device ch # SCSI media changers
device da # Direct Access (disks)
device sa # Sequential Access (tape etc)
device cd # CD
device pass # Passthrough device (direct ATA/SCSI access)
device ses # Enclosure Services (SES and SAF-TE)
#device ctl # CAM Target Layer
2003-11-08 03:17:36 +00:00
# RAID controllers interfaced to the SCSI subsystem
device amr # AMI MegaRAID
device arcmsr # Areca SATA II RAID
device ciss # Compaq Smart RAID 5*
device hptmv # Highpoint RocketRAID 182x
device hptnr # Highpoint DC7280, R750
device hptrr # Highpoint RocketRAID 17xx, 22xx, 23xx, 25xx
device hpt27xx # Highpoint RocketRAID 27xx
device iir # Intel Integrated RAID
device ips # IBM (Adaptec) ServeRAID
device mly # Mylex AcceleRAID/eXtremeRAID
device twa # 3ware 9000 series PATA/SATA RAID
device smartpqi # Microsemi smartpqi driver
device tws # LSI 3ware 9750 SATA+SAS 6Gb/s RAID controller
2003-11-08 03:17:36 +00:00
# RAID controllers
device aac # Adaptec FSA RAID
device aacp # SCSI passthrough for aac (requires CAM)
device aacraid # Adaptec by PMC RAID
device ida # Compaq Smart RAID
device mfi # LSI MegaRAID SAS
device mlx # Mylex DAC960 family
device mrsas # LSI/Avago MegaRAID SAS/SATA, 6Gb/s and 12Gb/s
device pmspcv # PMC-Sierra SAS/SATA Controller driver
#XXX pointer/int warnings
#device pst # Promise Supertrak SX6000
device twe # 3ware ATA RAID
# NVM Express (NVMe) support
device nvme # base NVMe driver
device nvd # expose NVMe namespaces as disks, depends on nvme
1999-04-19 10:18:34 +00:00
# atkbdc0 controls both the keyboard and the PS/2 mouse
device atkbdc # AT keyboard controller
device atkbd # AT keyboard
device psm # PS/2 mouse
device kbdmux # keyboard multiplexer
device vga # VGA video card driver
options VESA # Add support for VESA BIOS Extensions (VBE)
device splash # Splash screen and screen saver support
# syscons is the default console driver, resembling an SCO console
device sc
options SC_PIXEL_MODE # add support for the raster text mode
# vt is the new video console driver
device vt
device vt_vga
device vt_efifb
device agp # support several AGP chipsets
# PCCARD (PCMCIA) support
2004-01-30 03:02:45 +00:00
# PCMCIA and cardbus bridge support
device cbb # cardbus (yenta) bridge
device pccard # PC Card (16-bit) bus
device cardbus # CardBus (32-bit) bus
# Serial (COM) ports
device uart # Generic UART driver
1999-02-11 06:07:27 +00:00
# Parallel port
device ppc
device ppbus # Parallel port bus (required)
device lpt # Printer
device ppi # Parallel port interface device
#device vpo # Requires scbus and da
device puc # Multi I/O cards and multi-channel UARTs
# PCI/PCI-X/PCIe Ethernet NICs that use iflib infrastructure
device iflib
device em # Intel PRO/1000 Gigabit Ethernet Family
device ix # Intel PRO/10GbE PCIE PF Ethernet
device ixv # Intel PRO/10GbE PCIE VF Ethernet
device ixl # Intel 700 Series Physical Function
device iavf # Intel Adaptive Virtual Function
device vmx # VMware VMXNET3 Ethernet
# PCI Ethernet NICs.
device bxe # Broadcom NetXtreme II BCM5771X/BCM578XX 10GbE
device le # AMD Am7900 LANCE and Am79C9xx PCnet
device ti # Alteon Networks Tigon I/II gigabit Ethernet
# PCI Ethernet NICs that use the common MII bus controller code.
# NOTE: Be sure to keep the 'device miibus' line in order to use these NICs!
device miibus # MII bus support
device ae # Attansic/Atheros L2 FastEthernet
device age # Attansic/Atheros L1 Gigabit Ethernet
device alc # Atheros AR8131/AR8132 Ethernet
device ale # Atheros AR8121/AR8113/AR8114 Ethernet
device bce # Broadcom BCM5706/BCM5708 Gigabit Ethernet
device bfe # Broadcom BCM440x 10/100 Ethernet
device bge # Broadcom BCM570xx Gigabit Ethernet
device cas # Sun Cassini/Cassini+ and NS DP83065 Saturn
device dc # DEC/Intel 21143 and various workalikes
device et # Agere ET1310 10/100/Gigabit Ethernet
device fxp # Intel EtherExpress PRO/100B (82557, 82558)
device gem # Sun GEM/Sun ERI/Apple GMAC
device hme # Sun HME (Happy Meal Ethernet)
device jme # JMicron JMC250 Gigabit/JMC260 Fast Ethernet
device lge # Level 1 LXT1001 gigabit Ethernet
device msk # Marvell/SysKonnect Yukon II Gigabit Ethernet
device nfe # nVidia nForce MCP on-board Ethernet
device nge # NatSemi DP83820 gigabit Ethernet
device re # RealTek 8139C+/8169/8169S/8110S
device rl # RealTek 8129/8139
device sge # Silicon Integrated Systems SiS190/191
device sis # Silicon Integrated Systems SiS 900/SiS 7016
device sk # SysKonnect SK-984x & SK-982x gigabit Ethernet
device ste # Sundance ST201 (D-Link DFE-550TX)
device stge # Sundance/Tamarack TC9021 gigabit Ethernet
device vge # VIA VT612x gigabit Ethernet
device vr # VIA Rhine, Rhine II
device xl # 3Com 3c90x (``Boomerang'', ``Cyclone'')
# Wireless NIC cards
device wlan # 802.11 support
options IEEE80211_DEBUG # enable debug msgs
options IEEE80211_SUPPORT_MESH # enable 802.11s draft support
device wlan_wep # 802.11 WEP support
device wlan_ccmp # 802.11 CCMP support
device wlan_tkip # 802.11 TKIP support
device wlan_amrr # AMRR transmit rate control algorithm
device an # Aironet 4500/4800 802.11 wireless NICs.
device ath # Atheros NICs
device ath_pci # Atheros pci/cardbus glue
device ath_hal # pci/cardbus chip support
options AH_AR5416_INTERRUPT_MITIGATION # AR5416 interrupt mitigation
options ATH_ENABLE_11N # Enable 802.11n support for AR5416 and later
device ath_rate_sample # SampleRate tx rate control for ath
#device bwi # Broadcom BCM430x/BCM431x wireless NICs.
#device bwn # Broadcom BCM43xx wireless NICs.
device ipw # Intel 2100 wireless NICs.
device iwi # Intel 2200BG/2225BG/2915ABG wireless NICs.
device iwn # Intel 4965/1000/5000/6000 wireless NICs.
device malo # Marvell Libertas wireless NICs.
device mwl # Marvell 88W8363 802.11n wireless NICs.
device ral # Ralink Technology RT2500 wireless NICs.
device wi # WaveLAN/Intersil/Symbol 802.11 wireless NICs.
device wpi # Intel 3945ABG wireless NICs.
# Pseudo devices.
device crypto # core crypto support
device loop # Network loopback
device padlock_rng # VIA Padlock RNG
device rdrand_rng # Intel Bull Mountain RNG
device ether # Ethernet support
device vlan # 802.1Q VLAN support
tun/tap: merge and rename to `tuntap` tun(4) and tap(4) share the same general management interface and have a lot in common. Bugs exist in tap(4) that have been fixed in tun(4), and vice-versa. Let's reduce the maintenance requirements by merging them together and using flags to differentiate between the three interface types (tun, tap, vmnet). This fixes a couple of tap(4)/vmnet(4) issues right out of the gate: - tap devices may no longer be destroyed while they're open [0] - VIMAGE issues already addressed in tun by kp [0] emaste had removed an easy-panic-button in r240938 due to devdrn blocking. A naive glance over this leads me to believe that this isn't quite complete -- destroy_devl will only block while executing d_* functions, but doesn't block the device from being destroyed while a process has it open. The latter is the intent of the condvar in tun, so this is "fixed" (for certain definitions of the word -- it wasn't really broken in tap, it just wasn't quite ideal). ifconfig(8) also grew the ability to map an interface name to a kld, so that `ifconfig {tun,tap}0` can continue to autoload the correct module, and `ifconfig vmnet0 create` will now autoload the correct module. This is a low overhead addition. (MFC commentary) This may get MFC'd if many bugs in tun(4)/tap(4) are discovered after this, and how critical they are. Changes after this are likely easily MFC'd without taking this merge, but the merge will be easier. I have no plans to do this MFC as of now. Reviewed by: bcr (manpages), tuexen (testing, syzkaller/packetdrill) Input also from: melifaro Relnotes: yes Differential Revision: https://reviews.freebsd.org/D20044
2019-05-08 02:32:11 +00:00
device tuntap # Packet tunnel.
device md # Memory "disks"
device gif # IPv6 and IPv4 tunneling
device firmware # firmware assist module
2003-06-01 20:26:38 +00:00
# The `bpf' device enables the Berkeley Packet Filter.
# Be aware of the administrative consequences of enabling this!
# Note that 'bpf' is required for DHCP.
device bpf # Berkeley packet filter
# USB support
options USB_DEBUG # enable debug msgs
device uhci # UHCI PCI->USB interface
device ohci # OHCI PCI->USB interface
device ehci # EHCI PCI->USB interface (USB 2.0)
device xhci # XHCI PCI->USB interface (USB 3.0)
device usb # USB Bus (required)
device ukbd # Keyboard
device umass # Disks/Mass storage - Requires scbus and da
# Sound support
device sound # Generic sound driver (required)
device snd_cmi # CMedia CMI8338/CMI8738
device snd_csa # Crystal Semiconductor CS461x/428x
device snd_emu10kx # Creative SoundBlaster Live! and Audigy
device snd_es137x # Ensoniq AudioPCI ES137x
device snd_hda # Intel High Definition Audio
device snd_ich # Intel, NVidia and other ICH AC'97 Audio
device snd_via8233 # VIA VT8233x Audio
# MMC/SD
device mmc # MMC/SD bus
device mmcsd # MMC/SD memory card
device sdhci # Generic PCI SD Host Controller
# VirtIO support
device virtio # Generic VirtIO bus (required)
device virtio_pci # VirtIO PCI device
device vtnet # VirtIO Ethernet device
device virtio_blk # VirtIO Block device
device virtio_scsi # VirtIO SCSI device
device virtio_balloon # VirtIO Memory Balloon device
# HyperV drivers and enhancement support
device hyperv # HyperV drivers
# Xen HVM Guest Optimizations
# NOTE: XENHVM depends on xenpci. They must be added or removed together.
options XENHVM # Xen HVM kernel infrastructure
device xenpci # Xen HVM Hypervisor services driver
# Netmap provides direct access to TX/RX rings on supported NICs
device netmap # netmap(4) support
# evdev interface
options EVDEV_SUPPORT # evdev support in legacy drivers
device evdev # input event device support
device uinput # install /dev/uinput cdev