freebsd-dev/sys/dev/pccbb/pccbbreg.h

233 lines
9.3 KiB
C
Raw Normal View History

/*
* Copyright (c) 2000,2001 Jonathan Chen.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions, and the following disclaimer,
* without modification, immediately at the beginning of the file.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR
* ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* $FreeBSD$
*/
/*
* Copyright (c) 1998, 1999 and 2000
* HAYAKAWA Koichi. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* This product includes software developed by HAYAKAWA Koichi.
* 4. The name of the author may not be used to endorse or promote products
* derived from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
/*
* Register definitions for PCI to Cardbus Bridge chips
*/
/* PCI header registers */
Bulk changes made during the BSDcon kernel summit and travel afterwards. Appologies for making this one bulk commit, but I have tested all these changes together and don't want to break anything by trying to disentangle it. o Make debugging a sysctl/tunable o Remove flags word from yenta chip info, it is unused o Make 16-bit card I/O range and 32-bit card I/O range tunables o Start the rename of pccbb to cbb to match NetBSD by misc renames. o Kill the now bogus list of softcs to create kthread. Instead, just create the kthread in the attach routine. o Remove sc_ from some structure names. It isn't needed. o Refine chipset lookup code. o Match generic PCI <-> CardBus bridges. We specifically don't generically match PCI PCMCIA bridges because they are not, with one exception, yenta devices. o Add some comments about the why we need to have a function table ala OLDCARD o The PCI interrupt routing by using the ExCA registers is needed for for all bridges, per the spec, not just TI ones. o Collapse TOPIC95 and TOPIC95B. o Using the ToPIC 97 and 100 datasheets, try to support these bridges better, but more work is needed. o Generally clarify some XXX comments and add them in a few places where things didn't look right to me. o Move interrupt generating register access until after we establish an ISR. o Add support for YV and XV cards. X and Y are numbers to be determined later (but maybe never). o factor powerup code for 16-bit and 32-bit cards. o When a card supports more than one voltage, prefer the lowest supported volage. Windows does this, and MS's design guides imply this is the right thing to do. o Document race between kthread_exit(0) and kldunload's unmapping of pages that John Baldwin and I discovered. o Debounce the CSC interrupt a little better. o When a 16-bit card is inserted when we don't have a pccard child, warn about it better. Ditto for 32-bit card. o Ack ALL the interrupt bits that we get, not just 0x1. o maybe a couple minor style nits corrected.
2002-02-17 03:11:11 +00:00
#define CBBR_SOCKBASE 0x10 /* len=4 */
#define CBBR_MEMBASE0 0x1c /* len=4 */
#define CBBR_MEMLIMIT0 0x20 /* len=4 */
#define CBBR_MEMBASE1 0x24 /* len=4 */
#define CBBR_MEMLIMIT1 0x28 /* len=4 */
#define CBBR_IOBASE0 0x2c /* len=4 */
#define CBBR_IOLIMIT0 0x30 /* len=4 */
#define CBBR_IOBASE1 0x34 /* len=4 */
#define CBBR_IOLIMIT1 0x38 /* len=4 */
#define CBB_MEMALIGN 4096
#define CBB_IOALIGN 4
#define CBBR_INTRLINE 0x3c /* len=1 */
#define CBBR_INTRPIN 0x3d /* len=1 */
#define CBBR_BRIDGECTRL 0x3e /* len=2 */
# define CBBM_BRIDGECTRL_MASTER_ABORT 0x0020
# define CBBM_BRIDGECTRL_RESET 0x0040
# define CBBM_BRIDGECTRL_INTR_IREQ_EN 0x0080
# define CBBM_BRIDGECTRL_PREFETCH_0 0x0100
# define CBBM_BRIDGECTRL_PREFETCH_1 0x0200
# define CBBM_BRIDGECTRL_WRITE_POST_EN 0x0400
/* additional bit for RF5C46[567] */
Bulk changes made during the BSDcon kernel summit and travel afterwards. Appologies for making this one bulk commit, but I have tested all these changes together and don't want to break anything by trying to disentangle it. o Make debugging a sysctl/tunable o Remove flags word from yenta chip info, it is unused o Make 16-bit card I/O range and 32-bit card I/O range tunables o Start the rename of pccbb to cbb to match NetBSD by misc renames. o Kill the now bogus list of softcs to create kthread. Instead, just create the kthread in the attach routine. o Remove sc_ from some structure names. It isn't needed. o Refine chipset lookup code. o Match generic PCI <-> CardBus bridges. We specifically don't generically match PCI PCMCIA bridges because they are not, with one exception, yenta devices. o Add some comments about the why we need to have a function table ala OLDCARD o The PCI interrupt routing by using the ExCA registers is needed for for all bridges, per the spec, not just TI ones. o Collapse TOPIC95 and TOPIC95B. o Using the ToPIC 97 and 100 datasheets, try to support these bridges better, but more work is needed. o Generally clarify some XXX comments and add them in a few places where things didn't look right to me. o Move interrupt generating register access until after we establish an ISR. o Add support for YV and XV cards. X and Y are numbers to be determined later (but maybe never). o factor powerup code for 16-bit and 32-bit cards. o When a card supports more than one voltage, prefer the lowest supported volage. Windows does this, and MS's design guides imply this is the right thing to do. o Document race between kthread_exit(0) and kldunload's unmapping of pages that John Baldwin and I discovered. o Debounce the CSC interrupt a little better. o When a 16-bit card is inserted when we don't have a pccard child, warn about it better. Ditto for 32-bit card. o Ack ALL the interrupt bits that we get, not just 0x1. o maybe a couple minor style nits corrected.
2002-02-17 03:11:11 +00:00
# define CBBM_BRIDGECTRL_RL_3E0_EN 0x0800
# define CBBM_BRIDGECTRL_RL_3E2_EN 0x1000
Bulk changes made during the BSDcon kernel summit and travel afterwards. Appologies for making this one bulk commit, but I have tested all these changes together and don't want to break anything by trying to disentangle it. o Make debugging a sysctl/tunable o Remove flags word from yenta chip info, it is unused o Make 16-bit card I/O range and 32-bit card I/O range tunables o Start the rename of pccbb to cbb to match NetBSD by misc renames. o Kill the now bogus list of softcs to create kthread. Instead, just create the kthread in the attach routine. o Remove sc_ from some structure names. It isn't needed. o Refine chipset lookup code. o Match generic PCI <-> CardBus bridges. We specifically don't generically match PCI PCMCIA bridges because they are not, with one exception, yenta devices. o Add some comments about the why we need to have a function table ala OLDCARD o The PCI interrupt routing by using the ExCA registers is needed for for all bridges, per the spec, not just TI ones. o Collapse TOPIC95 and TOPIC95B. o Using the ToPIC 97 and 100 datasheets, try to support these bridges better, but more work is needed. o Generally clarify some XXX comments and add them in a few places where things didn't look right to me. o Move interrupt generating register access until after we establish an ISR. o Add support for YV and XV cards. X and Y are numbers to be determined later (but maybe never). o factor powerup code for 16-bit and 32-bit cards. o When a card supports more than one voltage, prefer the lowest supported volage. Windows does this, and MS's design guides imply this is the right thing to do. o Document race between kthread_exit(0) and kldunload's unmapping of pages that John Baldwin and I discovered. o Debounce the CSC interrupt a little better. o When a 16-bit card is inserted when we don't have a pccard child, warn about it better. Ditto for 32-bit card. o Ack ALL the interrupt bits that we get, not just 0x1. o maybe a couple minor style nits corrected.
2002-02-17 03:11:11 +00:00
#define CBBR_LEGACY 0x44 /* len=4 */
/* TI * */
#define CBBR_SYSCTRL 0x80 /* len=4 */
# define CBBM_SYSCTRL_INTRTIE 0x20000000u
/* TI [14][245]xx */
#define CBBR_MMCTRL 0x84 /* len=4 */
/* TI 12xx/14xx/15xx (except 1250/1251/1251B/1450) */
#define CBBR_MFUNC 0x8c /* len=4 */
# define CBBM_MFUNC_PIN0 0x0000000f
# define CBBM_MFUNC_PIN0_INTA 0x02
# define CBBM_MFUNC_PIN1 0x000000f0
# define CBBM_MFUNC_PIN1_INTB 0x20
# define CBBM_MFUNC_PIN2 0x00000f00
# define CBBM_MFUNC_PIN3 0x0000f000
# define CBBM_MFUNC_PIN4 0x000f0000
# define CBBM_MFUNC_PIN5 0x00f00000
# define CBBM_MFUNC_PIN6 0x0f000000
Bulk changes made during the BSDcon kernel summit and travel afterwards. Appologies for making this one bulk commit, but I have tested all these changes together and don't want to break anything by trying to disentangle it. o Make debugging a sysctl/tunable o Remove flags word from yenta chip info, it is unused o Make 16-bit card I/O range and 32-bit card I/O range tunables o Start the rename of pccbb to cbb to match NetBSD by misc renames. o Kill the now bogus list of softcs to create kthread. Instead, just create the kthread in the attach routine. o Remove sc_ from some structure names. It isn't needed. o Refine chipset lookup code. o Match generic PCI <-> CardBus bridges. We specifically don't generically match PCI PCMCIA bridges because they are not, with one exception, yenta devices. o Add some comments about the why we need to have a function table ala OLDCARD o The PCI interrupt routing by using the ExCA registers is needed for for all bridges, per the spec, not just TI ones. o Collapse TOPIC95 and TOPIC95B. o Using the ToPIC 97 and 100 datasheets, try to support these bridges better, but more work is needed. o Generally clarify some XXX comments and add them in a few places where things didn't look right to me. o Move interrupt generating register access until after we establish an ISR. o Add support for YV and XV cards. X and Y are numbers to be determined later (but maybe never). o factor powerup code for 16-bit and 32-bit cards. o When a card supports more than one voltage, prefer the lowest supported volage. Windows does this, and MS's design guides imply this is the right thing to do. o Document race between kthread_exit(0) and kldunload's unmapping of pages that John Baldwin and I discovered. o Debounce the CSC interrupt a little better. o When a 16-bit card is inserted when we don't have a pccard child, warn about it better. Ditto for 32-bit card. o Ack ALL the interrupt bits that we get, not just 0x1. o maybe a couple minor style nits corrected.
2002-02-17 03:11:11 +00:00
#define CBBR_CBCTRL 0x91 /* len=1 */
/* bits for TI 113X */
Bulk changes made during the BSDcon kernel summit and travel afterwards. Appologies for making this one bulk commit, but I have tested all these changes together and don't want to break anything by trying to disentangle it. o Make debugging a sysctl/tunable o Remove flags word from yenta chip info, it is unused o Make 16-bit card I/O range and 32-bit card I/O range tunables o Start the rename of pccbb to cbb to match NetBSD by misc renames. o Kill the now bogus list of softcs to create kthread. Instead, just create the kthread in the attach routine. o Remove sc_ from some structure names. It isn't needed. o Refine chipset lookup code. o Match generic PCI <-> CardBus bridges. We specifically don't generically match PCI PCMCIA bridges because they are not, with one exception, yenta devices. o Add some comments about the why we need to have a function table ala OLDCARD o The PCI interrupt routing by using the ExCA registers is needed for for all bridges, per the spec, not just TI ones. o Collapse TOPIC95 and TOPIC95B. o Using the ToPIC 97 and 100 datasheets, try to support these bridges better, but more work is needed. o Generally clarify some XXX comments and add them in a few places where things didn't look right to me. o Move interrupt generating register access until after we establish an ISR. o Add support for YV and XV cards. X and Y are numbers to be determined later (but maybe never). o factor powerup code for 16-bit and 32-bit cards. o When a card supports more than one voltage, prefer the lowest supported volage. Windows does this, and MS's design guides imply this is the right thing to do. o Document race between kthread_exit(0) and kldunload's unmapping of pages that John Baldwin and I discovered. o Debounce the CSC interrupt a little better. o When a 16-bit card is inserted when we don't have a pccard child, warn about it better. Ditto for 32-bit card. o Ack ALL the interrupt bits that we get, not just 0x1. o maybe a couple minor style nits corrected.
2002-02-17 03:11:11 +00:00
# define CBBM_CBCTRL_113X_RI_EN 0x80
# define CBBM_CBCTRL_113X_ZV_EN 0x40
# define CBBM_CBCTRL_113X_PCI_IRQ_EN 0x20
# define CBBM_CBCTRL_113X_PCI_INTR 0x10
# define CBBM_CBCTRL_113X_PCI_CSC 0x08
# define CBBM_CBCTRL_113X_PCI_CSC_D 0x04
# define CBBM_CBCTRL_113X_SPEAKER_EN 0x02
# define CBBM_CBCTRL_113X_INTR_DET 0x01
/* TI [14][245]xx */
Bulk changes made during the BSDcon kernel summit and travel afterwards. Appologies for making this one bulk commit, but I have tested all these changes together and don't want to break anything by trying to disentangle it. o Make debugging a sysctl/tunable o Remove flags word from yenta chip info, it is unused o Make 16-bit card I/O range and 32-bit card I/O range tunables o Start the rename of pccbb to cbb to match NetBSD by misc renames. o Kill the now bogus list of softcs to create kthread. Instead, just create the kthread in the attach routine. o Remove sc_ from some structure names. It isn't needed. o Refine chipset lookup code. o Match generic PCI <-> CardBus bridges. We specifically don't generically match PCI PCMCIA bridges because they are not, with one exception, yenta devices. o Add some comments about the why we need to have a function table ala OLDCARD o The PCI interrupt routing by using the ExCA registers is needed for for all bridges, per the spec, not just TI ones. o Collapse TOPIC95 and TOPIC95B. o Using the ToPIC 97 and 100 datasheets, try to support these bridges better, but more work is needed. o Generally clarify some XXX comments and add them in a few places where things didn't look right to me. o Move interrupt generating register access until after we establish an ISR. o Add support for YV and XV cards. X and Y are numbers to be determined later (but maybe never). o factor powerup code for 16-bit and 32-bit cards. o When a card supports more than one voltage, prefer the lowest supported volage. Windows does this, and MS's design guides imply this is the right thing to do. o Document race between kthread_exit(0) and kldunload's unmapping of pages that John Baldwin and I discovered. o Debounce the CSC interrupt a little better. o When a 16-bit card is inserted when we don't have a pccard child, warn about it better. Ditto for 32-bit card. o Ack ALL the interrupt bits that we get, not just 0x1. o maybe a couple minor style nits corrected.
2002-02-17 03:11:11 +00:00
# define CBBM_CBCTRL_12XX_RI_EN 0x80
# define CBBM_CBCTRL_12XX_ZV_EN 0x40
# define CBBM_CBCTRL_12XX_AUD2MUX 0x04
# define CBBM_CBCTRL_12XX_SPEAKER_EN 0x02
# define CBBM_CBCTRL_12XX_INTR_DET 0x01
#define CBBR_DEVCTRL 0x92 /* len=1 */
# define CBBM_DEVCTRL_INT_SERIAL 0x04
# define CBBM_DEVCTRL_INT_PCI 0x02
/* ToPIC 95 ONLY */
#define CBBR_TOPIC_SOCKETCTRL 0x90
# define CBBM_TOPIC_SOCKETCTRL_SCR_IRQSEL 0x00000001 /* PCI intr */
/* ToPIC 97, 100 */
#define CBBR_TOPIC_ZV_CONTROL 0x9c /* 1 byte */
# define CBBM_TOPIC_ZVC_ENABLE 0x1
/* TOPIC 95+ */
#define CBBR_TOPIC_SLOTCTRL 0xa0 /* 1 byte */
# define CBBM_TOPIC_SLOTCTRL_SLOTON 0x80
# define CBBM_TOPIC_SLOTCTRL_SLOTEN 0x40
# define CBBM_TOPIC_SLOTCTRL_ID_LOCK 0x20
# define CBBM_TOPIC_SLOTCTRL_ID_WP 0x10
# define CBBM_TOPIC_SLOTCTRL_PORT_MASK 0x0c
# define CBBM_TOPIC_SLOTCTRL_PORT_SHIFT 2
# define CBBM_TOPIC_SLOTCTRL_OSF_MASK 0x03
# define CBBM_TOPIC_SLOTCTRL_OSF_SHIFT 0
/* TOPIC 95+ */
#define CBBR_TOPIC_INTCTRL 0xa1 /* 1 byte */
# define CBBM_TOPIC_INTCTRL_INTB 0x20
# define CBBM_TOPIC_INTCTRL_INTA 0x10
# define CBBM_TOPIC_INTCTRL_INT_MASK 0x30
/* The following bits may be for ToPIC 95 only */
# define CBBM_TOPIC_INTCTRL_CLOCK_MASK 0x0c
# define CBBM_TOPIC_INTCTRL_CLOCK_2 0x08 /* PCI Clk/2 */
# define CBBM_TOPIC_INTCTRL_CLOCK_1 0x04 /* PCI Clk */
# define CBBM_TOPIC_INTCTRL_CLOCK_0 0x00 /* no clock */
/* ToPIC97, 100 defines the following bits */
# define CBBM_TOPIC_INTCTRL_STSIRQNP 0x04
# define CBBM_TOPIC_INTCTRL_IRQNP 0x02
# define CBBM_TOPIC_INTCTRL_INTIRQSEL 0x01
/* TOPIC 95+ */
#define CBBR_TOPIC_CDC 0xa3 /* 1 byte */
# define CBBM_TOPIC_CDC_CARDBUS 0x80
# define CBBM_TOPIC_CDC_VS1 0x04
# define CBBM_TOPIC_CDC_VS2 0x02
# define CBBM_TOPIC_CDC_SWDETECT 0x01
/* Socket definitions */
Bulk changes made during the BSDcon kernel summit and travel afterwards. Appologies for making this one bulk commit, but I have tested all these changes together and don't want to break anything by trying to disentangle it. o Make debugging a sysctl/tunable o Remove flags word from yenta chip info, it is unused o Make 16-bit card I/O range and 32-bit card I/O range tunables o Start the rename of pccbb to cbb to match NetBSD by misc renames. o Kill the now bogus list of softcs to create kthread. Instead, just create the kthread in the attach routine. o Remove sc_ from some structure names. It isn't needed. o Refine chipset lookup code. o Match generic PCI <-> CardBus bridges. We specifically don't generically match PCI PCMCIA bridges because they are not, with one exception, yenta devices. o Add some comments about the why we need to have a function table ala OLDCARD o The PCI interrupt routing by using the ExCA registers is needed for for all bridges, per the spec, not just TI ones. o Collapse TOPIC95 and TOPIC95B. o Using the ToPIC 97 and 100 datasheets, try to support these bridges better, but more work is needed. o Generally clarify some XXX comments and add them in a few places where things didn't look right to me. o Move interrupt generating register access until after we establish an ISR. o Add support for YV and XV cards. X and Y are numbers to be determined later (but maybe never). o factor powerup code for 16-bit and 32-bit cards. o When a card supports more than one voltage, prefer the lowest supported volage. Windows does this, and MS's design guides imply this is the right thing to do. o Document race between kthread_exit(0) and kldunload's unmapping of pages that John Baldwin and I discovered. o Debounce the CSC interrupt a little better. o When a 16-bit card is inserted when we don't have a pccard child, warn about it better. Ditto for 32-bit card. o Ack ALL the interrupt bits that we get, not just 0x1. o maybe a couple minor style nits corrected.
2002-02-17 03:11:11 +00:00
#define CBB_SOCKET_EVENT_CSTS 0x01 /* Card Status Change */
#define CBB_SOCKET_EVENT_CD1 0x02 /* Card Detect 1 */
#define CBB_SOCKET_EVENT_CD2 0x04 /* Card Detect 2 */
#define CBB_SOCKET_EVENT_CD 0x06 /* Card Detect all */
#define CBB_SOCKET_EVENT_POWER 0x08 /* Power Cycle */
Bulk changes made during the BSDcon kernel summit and travel afterwards. Appologies for making this one bulk commit, but I have tested all these changes together and don't want to break anything by trying to disentangle it. o Make debugging a sysctl/tunable o Remove flags word from yenta chip info, it is unused o Make 16-bit card I/O range and 32-bit card I/O range tunables o Start the rename of pccbb to cbb to match NetBSD by misc renames. o Kill the now bogus list of softcs to create kthread. Instead, just create the kthread in the attach routine. o Remove sc_ from some structure names. It isn't needed. o Refine chipset lookup code. o Match generic PCI <-> CardBus bridges. We specifically don't generically match PCI PCMCIA bridges because they are not, with one exception, yenta devices. o Add some comments about the why we need to have a function table ala OLDCARD o The PCI interrupt routing by using the ExCA registers is needed for for all bridges, per the spec, not just TI ones. o Collapse TOPIC95 and TOPIC95B. o Using the ToPIC 97 and 100 datasheets, try to support these bridges better, but more work is needed. o Generally clarify some XXX comments and add them in a few places where things didn't look right to me. o Move interrupt generating register access until after we establish an ISR. o Add support for YV and XV cards. X and Y are numbers to be determined later (but maybe never). o factor powerup code for 16-bit and 32-bit cards. o When a card supports more than one voltage, prefer the lowest supported volage. Windows does this, and MS's design guides imply this is the right thing to do. o Document race between kthread_exit(0) and kldunload's unmapping of pages that John Baldwin and I discovered. o Debounce the CSC interrupt a little better. o When a 16-bit card is inserted when we don't have a pccard child, warn about it better. Ditto for 32-bit card. o Ack ALL the interrupt bits that we get, not just 0x1. o maybe a couple minor style nits corrected.
2002-02-17 03:11:11 +00:00
#define CBB_SOCKET_MASK_CSTS 0x01 /* Card Status Change */
#define CBB_SOCKET_MASK_CD 0x06 /* Card Detect */
#define CBB_SOCKET_MASK_POWER 0x08 /* Power Cycle */
#define CBB_SOCKET_MASK_ALL 0x0F /* all of the above */
Bulk changes made during the BSDcon kernel summit and travel afterwards. Appologies for making this one bulk commit, but I have tested all these changes together and don't want to break anything by trying to disentangle it. o Make debugging a sysctl/tunable o Remove flags word from yenta chip info, it is unused o Make 16-bit card I/O range and 32-bit card I/O range tunables o Start the rename of pccbb to cbb to match NetBSD by misc renames. o Kill the now bogus list of softcs to create kthread. Instead, just create the kthread in the attach routine. o Remove sc_ from some structure names. It isn't needed. o Refine chipset lookup code. o Match generic PCI <-> CardBus bridges. We specifically don't generically match PCI PCMCIA bridges because they are not, with one exception, yenta devices. o Add some comments about the why we need to have a function table ala OLDCARD o The PCI interrupt routing by using the ExCA registers is needed for for all bridges, per the spec, not just TI ones. o Collapse TOPIC95 and TOPIC95B. o Using the ToPIC 97 and 100 datasheets, try to support these bridges better, but more work is needed. o Generally clarify some XXX comments and add them in a few places where things didn't look right to me. o Move interrupt generating register access until after we establish an ISR. o Add support for YV and XV cards. X and Y are numbers to be determined later (but maybe never). o factor powerup code for 16-bit and 32-bit cards. o When a card supports more than one voltage, prefer the lowest supported volage. Windows does this, and MS's design guides imply this is the right thing to do. o Document race between kthread_exit(0) and kldunload's unmapping of pages that John Baldwin and I discovered. o Debounce the CSC interrupt a little better. o When a 16-bit card is inserted when we don't have a pccard child, warn about it better. Ditto for 32-bit card. o Ack ALL the interrupt bits that we get, not just 0x1. o maybe a couple minor style nits corrected.
2002-02-17 03:11:11 +00:00
#define CBB_SOCKET_STAT_CARDSTS 0x00000001 /* Card Status Change */
#define CBB_SOCKET_STAT_CD1 0x00000002 /* Card Detect 1 */
#define CBB_SOCKET_STAT_CD2 0x00000004 /* Card Detect 2 */
#define CBB_SOCKET_STAT_CD 0x00000006 /* Card Detect all */
#define CBB_SOCKET_STAT_PWRCYCLE 0x00000008 /* Power Cycle */
#define CBB_SOCKET_STAT_16BIT 0x00000010 /* 16-bit Card */
#define CBB_SOCKET_STAT_CB 0x00000020 /* Cardbus Card */
#define CBB_SOCKET_STAT_IREQ 0x00000040 /* Ready */
#define CBB_SOCKET_STAT_NOTCARD 0x00000080 /* Unrecognized Card */
#define CBB_SOCKET_STAT_DATALOST 0x00000100 /* Data Lost */
#define CBB_SOCKET_STAT_BADVCC 0x00000200 /* Bad VccRequest */
#define CBB_SOCKET_STAT_5VCARD 0x00000400 /* 5 V Card */
#define CBB_SOCKET_STAT_3VCARD 0x00000800 /* 3.3 V Card */
#define CBB_SOCKET_STAT_XVCARD 0x00001000 /* X.X V Card */
#define CBB_SOCKET_STAT_YVCARD 0x00002000 /* Y.Y V Card */
#define CBB_SOCKET_STAT_5VSOCK 0x10000000 /* 5 V Socket */
#define CBB_SOCKET_STAT_3VSOCK 0x20000000 /* 3.3 V Socket */
#define CBB_SOCKET_STAT_XVSOCK 0x40000000 /* X.X V Socket */
#define CBB_SOCKET_STAT_YVSOCK 0x80000000 /* Y.Y V Socket */
#define CBB_SOCKET_CTRL_VPPMASK 0x07
#define CBB_SOCKET_CTRL_VPP_OFF 0x00
#define CBB_SOCKET_CTRL_VPP_12V 0x01
#define CBB_SOCKET_CTRL_VPP_5V 0x02
#define CBB_SOCKET_CTRL_VPP_3V 0x03
#define CBB_SOCKET_CTRL_VPP_XV 0x04
#define CBB_SOCKET_CTRL_VPP_YV 0x05
#define CBB_SOCKET_CTRL_VCCMASK 0x70
#define CBB_SOCKET_CTRL_VCC_OFF 0x00
#define CBB_SOCKET_CTRL_VCC_5V 0x20
#define CBB_SOCKET_CTRL_VCC_3V 0x30
#define CBB_SOCKET_CTRL_VCC_XV 0x40
#define CBB_SOCKET_CTRL_VCC_YV 0x50
#define CBB_SOCKET_CTRL_STOPCLK 0x80
#include <dev/pccbb/pccbbdevid.h>
Bulk changes made during the BSDcon kernel summit and travel afterwards. Appologies for making this one bulk commit, but I have tested all these changes together and don't want to break anything by trying to disentangle it. o Make debugging a sysctl/tunable o Remove flags word from yenta chip info, it is unused o Make 16-bit card I/O range and 32-bit card I/O range tunables o Start the rename of pccbb to cbb to match NetBSD by misc renames. o Kill the now bogus list of softcs to create kthread. Instead, just create the kthread in the attach routine. o Remove sc_ from some structure names. It isn't needed. o Refine chipset lookup code. o Match generic PCI <-> CardBus bridges. We specifically don't generically match PCI PCMCIA bridges because they are not, with one exception, yenta devices. o Add some comments about the why we need to have a function table ala OLDCARD o The PCI interrupt routing by using the ExCA registers is needed for for all bridges, per the spec, not just TI ones. o Collapse TOPIC95 and TOPIC95B. o Using the ToPIC 97 and 100 datasheets, try to support these bridges better, but more work is needed. o Generally clarify some XXX comments and add them in a few places where things didn't look right to me. o Move interrupt generating register access until after we establish an ISR. o Add support for YV and XV cards. X and Y are numbers to be determined later (but maybe never). o factor powerup code for 16-bit and 32-bit cards. o When a card supports more than one voltage, prefer the lowest supported volage. Windows does this, and MS's design guides imply this is the right thing to do. o Document race between kthread_exit(0) and kldunload's unmapping of pages that John Baldwin and I discovered. o Debounce the CSC interrupt a little better. o When a 16-bit card is inserted when we don't have a pccard child, warn about it better. Ditto for 32-bit card. o Ack ALL the interrupt bits that we get, not just 0x1. o maybe a couple minor style nits corrected.
2002-02-17 03:11:11 +00:00
#define CBB_SOCKET_EVENT 0x00
#define CBB_SOCKET_MASK 0x04
#define CBB_SOCKET_STATE 0x08
#define CBB_SOCKET_FORCE 0x0c
#define CBB_SOCKET_CONTROL 0x10
#define CBB_SOCKET_POWER 0x14
#define CBB_EXCA_OFFSET 0x800 /* offset for exca regs */