d/freebsd-dev
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
ddcc2ecb3a
freebsd-dev/sys/amd64/conf/GENERIC

366 lines
14 KiB
Plaintext
Raw Normal View History

Sync with i386 - add everything that compiles. There are a few drivers that are trivially easy to fix (eg: ips) that I've not committed fixes for.
2003-06-26 03:49:54 +00:00
#
Commit MD parts of a loosely functional AMD64 port. This is based on a heavily stripped down FreeBSD/i386 (brutally stripped down actually) to attempt to get a stable base to start from. There is a lot missing still. Worth noting: - The kernel runs at 1GB in order to cheat with the pmap code. pmap uses a variation of the PAE code in order to avoid having to worry about 4 levels of page tables yet. - It boots in 64 bit "long mode" with a tiny trampoline embedded in the i386 loader. This simplifies locore.s greatly. - There are still quite a few fragments of i386-specific code that have not been translated yet, and some that I cheated and wrote dumb C versions of (bcopy etc). - It has both int 0x80 for syscalls (but using registers for argument passing, as is native on the amd64 ABI), and the 'syscall' instruction for syscalls. int 0x80 preserves all registers, 'syscall' does not. - I have tried to minimize looking at the NetBSD code, except in a couple of places (eg: to find which register they use to replace the trashed %rcx register in the syscall instruction). As a result, there is not a lot of similarity. I did look at NetBSD a few times while debugging to get some ideas about what I might have done wrong in my first attempt.
2003-05-01 01:05:25 +00:00
# GENERIC -- Generic kernel configuration file for FreeBSD/amd64
GENERIC is our new all singing and dancing kernel. Please report ASAP if there is anything GENERICAH or GENERICBT can, which this one cannot. MINI changed to reflect the SCSI-pecking-order.
1994-10-17 21:10:20 +00:00
#
Documentation-only change: - add a reference to the config(5) manpage; - hopefully clarify the format of the 'env FILENAME' directive. I am putting these notes in sys/${arch}/conf/GENERIC and not in sys/conf/NOTES because: 1. i386/GENERIC already had reference to a similar option (hints..) and to documentation (handbook) 2. GENERIC is what most users look at when they have to modify or create a new kernel config, so having the suggestion there is more effective. I am only touching i386 and amd64 because the other GENERIC files are already out of sync, and I am not sure what is the overall plan. MFC after: 3 days
2009-01-13 12:35:33 +00:00
# For more information on this file, please read the config(5) manual page,
# and/or the handbook section on Kernel Configuration Files:
GENERIC is our new all singing and dancing kernel. Please report ASAP if there is anything GENERICAH or GENERICBT can, which this one cannot. MINI changed to reflect the SCSI-pecking-order.
1994-10-17 21:10:20 +00:00
#
Fix the link to the Handbook
2002-08-01 17:21:18 +00:00
# http://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig-config.html
Clean up some of the documentation at the top.
1999-06-20 03:36:46 +00:00
#
# The handbook is also available locally in /usr/share/doc/handbook
# if you've installed the doc distribution, otherwise always see the
Change to comments only: spell FreeBSD.org correctly
2000-05-13 11:21:19 +00:00
# FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the
Clean up some of the documentation at the top.
1999-06-20 03:36:46 +00:00
# latest information.
#
# An exhaustive list of options and more detailed explanations of the
GRR. MFi386: white space spam
2004-01-30 03:02:45 +00:00
# device lines is also present in the ../../conf/NOTES and NOTES files.
# If you are in doubt as to the purpose or necessity of a line, check first
Various comment and minor style fixes. No actual content changes. Inspired by: bde
2002-07-16 18:20:17 +00:00
# in NOTES.
Add hints to the file ./LINT and the handbook.
1996-08-27 16:25:53 +00:00
#
$Id$ -> $FreeBSD$
1999-08-28 01:08:13 +00:00
# $FreeBSD$
GENERIC is our new all singing and dancing kernel. Please report ASAP if there is anything GENERICAH or GENERICBT can, which this one cannot. MINI changed to reflect the SCSI-pecking-order.
1994-10-17 21:10:20 +00:00
Commit MD parts of a loosely functional AMD64 port. This is based on a heavily stripped down FreeBSD/i386 (brutally stripped down actually) to attempt to get a stable base to start from. There is a lot missing still. Worth noting: - The kernel runs at 1GB in order to cheat with the pmap code. pmap uses a variation of the PAE code in order to avoid having to worry about 4 levels of page tables yet. - It boots in 64 bit "long mode" with a tiny trampoline embedded in the i386 loader. This simplifies locore.s greatly. - There are still quite a few fragments of i386-specific code that have not been translated yet, and some that I cheated and wrote dumb C versions of (bcopy etc). - It has both int 0x80 for syscalls (but using registers for argument passing, as is native on the amd64 ABI), and the 'syscall' instruction for syscalls. int 0x80 preserves all registers, 'syscall' does not. - I have tried to minimize looking at the NetBSD code, except in a couple of places (eg: to find which register they use to replace the trashed %rcx register in the syscall instruction). As a result, there is not a lot of similarity. I did look at NetBSD a few times while debugging to get some ideas about what I might have done wrong in my first attempt.
2003-05-01 01:05:25 +00:00
cpu HAMMER
GENERIC is our new all singing and dancing kernel. Please report ASAP if there is anything GENERICAH or GENERICBT can, which this one cannot. MINI changed to reflect the SCSI-pecking-order.
1994-10-17 21:10:20 +00:00
ident GENERIC
Restore comments accidentally removed. MFC after: 3 days
2014-06-06 04:08:55 +00:00
makeoptions DEBUG=-g # Build kernel with gdb(1) debug symbols
Enable DTrace hooks in GENERIC. Reviewed by: gnn Approved by: core (jhb, imp) Requested by: a cast of thousands MFC after: 3 days
2012-04-20 21:37:42 +00:00
makeoptions WITH_CTF=1 # Run ctfconvert(1) for DTrace support
Sync with i386/GENERIC ordering.
2003-06-01 20:26:38 +00:00
Switch over to ULE as the default scheduler for amd64 and i386 architectures.
2007-10-19 12:30:33 +00:00
options SCHED_ULE # ULE scheduler
Switch the default scheduler to 4BSD to match what will go into RELENG_5 soon. It can be switched back once 5.3 is tested and released. Also turn on PREEMPTION as many of the stability problems with it have been fixed. MT5: 3 days.
2004-09-07 22:37:43 +00:00
options PREEMPTION # Enable kernel thread preemption
GRR. MFi386: white space spam
2004-01-30 03:02:45 +00:00
options INET # InterNETworking
options INET6 # IPv6 communications protocols
- Updated TOE support in the kernel. - Stateful TCP offload drivers for Terminator 3 and 4 (T3 and T4) ASICs. These are available as t3_tom and t4_tom modules that augment cxgb(4) and cxgbe(4) respectively. The cxgb/cxgbe drivers continue to work as usual with or without these extra features. - iWARP driver for Terminator 3 ASIC (kernel verbs). T4 iWARP in the works and will follow soon. Build-tested with make universe. 30s overview ============ What interfaces support TCP offload? Look for TOE4 and/or TOE6 in the capabilities of an interface: # ifconfig -m | grep TOE Enable/disable TCP offload on an interface (just like any other ifnet capability): # ifconfig cxgbe0 toe # ifconfig cxgbe0 -toe Which connections are offloaded? Look for toe4 and/or toe6 in the output of netstat and sockstat: # netstat -np tcp | grep toe # sockstat -46c | grep toe Reviewed by: bz, gnn Sponsored by: Chelsio communications. MFC after: ~3 months (after 9.1, and after ensuring MFC is feasible)
2012-06-19 07:34:13 +00:00
options TCP_OFFLOAD # TCP offload
Eliminate whitespace diffs to the i386 version.
2008-02-19 06:30:49 +00:00
options SCTP # Stream Control Transmission Protocol
GRR. MFi386: white space spam
2004-01-30 03:02:45 +00:00
options FFS # Berkeley Fast Filesystem
options SOFTUPDATES # Enable FFS soft updates support
options UFS_ACL # Support for access control lists
options UFS_DIRHASH # Improve performance on big directories
Remove trailing '.' for consistency!
2007-04-10 21:40:13 +00:00
options UFS_GJOURNAL # Enable gjournal-based UFS journaling
Enable the UFS quotas for big-iron GENERIC kernels. Discussed with: mckusick MFC after: 2 weeks
2013-01-03 19:03:41 +00:00
options QUOTA # Enable disk quotas for UFS
GRR. MFi386: white space spam
2004-01-30 03:02:45 +00:00
options MD_ROOT # MD is a potential root device
Remove "New" label from NFSCL/NFSD now that they are the only NFS client/server. While here, remove duplicate NFSCL from sys/conf/NOTES. Approved by: rmacklem
2015-01-06 16:15:57 +00:00
options NFSCL # Network Filesystem Client
options NFSD # Network Filesystem Server
Add kernel module support for nfslockd and krpc. Use the module system to detect (or load) kernel NLM support in rpc.lockd. Remove the '-k' option to rpc.lockd and make kernel NLM the default. A user can still force the use of the old user NLM by building a kernel without NFSLOCKD and/or removing the nfslockd.ko module.
2008-03-27 11:54:20 +00:00
options NFSLOCKD # Network Lock Manager
Change all the sample kernel configurations to use NFSCL, NFSD instead of NFSCLIENT, NFSSERVER since NFSCL and NFSD are now the defaults. The client change is needed for diskless configurations, so that the root mount works for fstype nfs. Reported by seanbru at yahoo-inc.com for i386/XEN. Approved by: re (hrs)
2011-08-07 20:16:46 +00:00
options NFS_ROOT # NFS usable as /, requires NFSCL
GRR. MFi386: white space spam
2004-01-30 03:02:45 +00:00
options MSDOSFS # MSDOS Filesystem
options CD9660 # ISO 9660 Filesystem
options PROCFS # Process filesystem (requires PSEUDOFS)
options PSEUDOFS # Pseudo-filesystem framework
Evolve the ctlreq interface added to geom_gpt into a generic partitioning class that supports multiple schemes. Current schemes supported are APM (Apple Partition Map) and GPT. Change all GEOM_APPLE anf GEOM_GPT options into GEOM_PART_APM and GEOM_PART_GPT (resp). The ctlreq interface supports verbs to create and destroy partitioning schemes on a disk; to add, delete and modify partitions; and to commit or undo changes made.
2007-02-07 18:55:31 +00:00
options GEOM_PART_GPT # GUID Partition Tables.
Add `options GEOM_RAID` into i386 and amd64 GENERIC kernels. ataraid(4) previously was present there and having GEOM RAID is convinient. Unlike other classes GEOM RAID can be set up from BIOS before install and users are expecting it to be detected automatically.
2012-05-10 12:37:32 +00:00
options GEOM_RAID # Soft RAID functionality.
Include GEOM_LABEL in GENERIC. It's very useful and not well publicized enough. Approved by: pjd
2007-02-09 19:03:18 +00:00
options GEOM_LABEL # Provides labelization
Provide groundwork for 32-bit binary compatibility on non-x86 platforms, for upcoming 64-bit PowerPC and MIPS support. This renames the COMPAT_IA32 option to COMPAT_FREEBSD32, removes some IA32-specific code from MI parts of the kernel and enhances the freebsd32 compatibility code to support big-endian platforms. Reviewed by: kib, jhb
2010-03-11 14:49:06 +00:00
options COMPAT_FREEBSD32 # Compatible with i386 binaries
GRR. MFi386: white space spam
2004-01-30 03:02:45 +00:00
options COMPAT_FREEBSD4 # Compatible with FreeBSD4
Add recently invented COMPAT_FREEBSD5 option. MFC after: 3 days
2005-07-14 15:39:06 +00:00
options COMPAT_FREEBSD5 # Compatible with FreeBSD5
Added COMPAT_FREEBSD6 option.
2006-09-26 12:36:34 +00:00
options COMPAT_FREEBSD6 # Compatible with FreeBSD6
Add COMPAT_FREEBSD7 and enable it in configs that have COMPAT_FREEBSD6.
2008-01-07 21:40:11 +00:00
options COMPAT_FREEBSD7 # Compatible with FreeBSD7
Add COMPAT_FREEBSD9 and COMPAT_FREEBSD10 options to wrap code that provides compatability for FreeBSD 9.x and 10.x binaries. Enable these options in kernel configs that enable other COMPAT_FREEBSD<n> options.
2014-10-24 19:58:24 +00:00
options COMPAT_FREEBSD9 # Compatible with FreeBSD9
options COMPAT_FREEBSD10 # Compatible with FreeBSD10
Reduce annoying SCSI probing delay from 15 to 5 seconds in all GENRIC kernels. Discussed on: -current
2004-11-02 20:57:20 +00:00
options SCSI_DELAY=5000 # Delay (in ms) before probing SCSI
GRR. MFi386: white space spam
2004-01-30 03:02:45 +00:00
options KTRACE # ktrace(1) support
Break out stack(9) from ddb(4): - Introduce per-architecture stack_machdep.c to hold stack_save(9). - Introduce per-architecture machine/stack.h to capture any common definitions required between db_trace.c and stack_machdep.c. - Add new kernel option "options STACK"; we will build in stack(9) if it is defined, or also if "options DDB" is defined to provide compatibility with existing users of stack(9). Add new stack_save_td(9) function, which allows the capture of a stacktrace of another thread rather than the current thread, which the existing stack_save(9) was limited to. It requires that the thread be neither swapped out nor running, which is the responsibility of the consumer to enforce. Update stack(9) man page. Build tested: amd64, arm, i386, ia64, powerpc, sparc64, sun4v Runtime tested: amd64 (rwatson), arm (cognet), i386 (rwatson)
2007-12-02 20:40:35 +00:00
options STACK # stack(9) support
GRR. MFi386: white space spam
2004-01-30 03:02:45 +00:00
options SYSVSHM # SYSV-style shared memory
options SYSVMSG # SYSV-style message queues
options SYSVSEM # SYSV-style semaphores
Minor sync to i386 GENERIC in the form of comments and whitespace.
2004-12-30 18:51:23 +00:00
options _KPOSIX_PRIORITY_SCHEDULING # POSIX P1003_1B real-time extensions
Enable PRINTF_BUFR_SIZE on i386 and amd64 by default. In the past there have been some reports of PRINTF_BUFR_SIZE not functioning correctly. Instead of having garbled console messages, we should just see whether the issues are still there and analyze them. Approved by: re
2009-06-14 18:01:35 +00:00
options PRINTF_BUFR_SIZE=128 # Prevent printf output being interspersed.
Sync with i386 - add everything that compiles. There are a few drivers that are trivially easy to fix (eg: ips) that I've not committed fixes for.
2003-06-26 03:49:54 +00:00
options KBD_INSTALL_CDEV # install a CDEV entry in /dev
- Use "device\t" and "options \t" for consistency.
2009-05-10 00:00:25 +00:00
options HWPMC_HOOKS # Necessary kernel hooks for hwpmc(4)
Enable AUDIT by default in the GENERIC kernel, allowing security event auditing to be turned on without a kernel recompile, just an rc.conf option. Approved by: re (kensmith) Obtained from: TrustedBSD Project
2007-06-08 20:29:07 +00:00
options AUDIT # Security event auditing
Add "options CAPABILITY_MODE" and "options CAPABILITIES" to GENERIC kernel configurations for various architectures in FreeBSD 10.x. This allows basic Capsicum functionality to be used in the default FreeBSD configuration on non-embedded architectures; process descriptors are not yet enabled by default. MFC after: 3 months Sponsored by: Google, Inc
2011-12-29 22:48:36 +00:00
options CAPABILITY_MODE # Capsicum capability mode
options CAPABILITIES # Capsicum capabilities
Remove MAC kernel config files and add "options MAC" to GENERIC, with the goal of shipping 8.0 with MAC support in the default kernel. No policies will be compiled in or enabled by default, but it will now be possible to load them at boot or runtime without a kernel recompile. While the framework is not believed to impose measurable overhead when no policies are loaded (a result of optimization over the past few months in HEAD), we'll continue to benchmark and optimize as the release approaches. Please keep an eye out for performance or functionality regressions that could be a result of this change. Approved by: re (kensmith) Obtained from: TrustedBSD Project
2009-06-02 18:31:08 +00:00
options MAC # TrustedBSD MAC Framework
Enable DTrace hooks in GENERIC. Reviewed by: gnn Approved by: core (jhb, imp) Requested by: a cast of thousands MFC after: 3 days
2012-04-20 21:37:42 +00:00
options KDTRACE_FRAME # Ensure frames are compiled in
options KDTRACE_HOOKS # Kernel DTrace hooks
The DDB_CTF has little or nothing to do with the debugger so move it next KDTRACE_HOOKS.
2012-05-09 01:37:48 +00:00
options DDB_CTF # Kernel ELF linker loads CTF data
Align all comments in config files on same column. This consistency helps when bits and pieces of GENERIC from i386 or amd64 are cut and pasted into other architecture's config files (which in the case of ARM had gotten rather akimbo).
2014-03-16 15:22:52 +00:00
options INCLUDE_CONFIG_FILE # Include this file in kernel
Build GENERIC with RACCT/RCTL support by default. Note that it still needs to be enabled by adding "kern.racct.enable=1" to /boot/loader.conf. Differential Revision: https://reviews.freebsd.org/D2407 Reviewed by: emaste@, wblock@ MFC after: 1 month Relnotes: yes Sponsored by: The FreeBSD Foundation
2015-05-14 14:03:55 +00:00
options RACCT # Resource accounting framework
options RACCT_DEFAULT_TO_DISABLED # Set kern.racct.enable=0 by default
options RCTL # Resource limits
GENERIC is our new all singing and dancing kernel. Please report ASAP if there is anything GENERICAH or GENERICBT can, which this one cannot. MINI changed to reflect the SCSI-pecking-order.
1994-10-17 21:10:20 +00:00
Adjust the debugger options slightly. This should help me do the right thing when changing the debugging options as part of head becoming a new stable branch. It may also help people who for one reason or another want to run head but don't want it slowed down by the debugging support. Reviewed by: kib
2011-10-27 13:07:49 +00:00
# Debugging support. Always need this:
Add options KDB and GDB. KDB takes on the function of what DDB used to be. Both DDB and GDB specify which KDB backends to include.
2004-07-11 03:20:09 +00:00
options KDB # Enable kernel debugger support.
enable KDB_TRACE in GENERICs KDB_TRACE is not an alternative to DDB/etc, they are complementary. So I do not see any reason to not enable KDB_TRACE by default. X-MFC after: never (change specific to head)
2013-08-07 08:03:50 +00:00
options KDB_TRACE # Print a stack trace for a panic.
follow up to r254051 - update powerpc/GENERIC64 as well, suggested by mdf - update comments so that they make sense after the change, suggested by jhb X-MFC after: never (change specific to head)
2013-08-09 08:11:09 +00:00
# For full debugger support use (turn off in stable branch):
Add options KDB and GDB. KDB takes on the function of what DDB used to be. Both DDB and GDB specify which KDB backends to include.
2004-07-11 03:20:09 +00:00
options DDB # Support DDB.
options GDB # Support remote GDB.
Adjust style (following the already existing rules) for the newly introduced option DEADLKRES. Reported by: danfe, julian, avg
2010-02-15 23:44:48 +00:00
options DEADLKRES # Enable the deadlock resolver
Revert part of the r227758 which crept in. Pointy hat: attilio X-MFC: r227758
2011-11-20 16:36:02 +00:00
options INVARIANTS # Enable calls of extra sanity checking
Ooops. Put back Invariants and witness Submitted by: csjp
2007-10-26 02:35:42 +00:00
options INVARIANT_SUPPORT # Extra sanity checks of internal structures, required by INVARIANTS
Revert part of the r227758 which crept in. Pointy hat: attilio X-MFC: r227758
2011-11-20 16:36:02 +00:00
options WITNESS # Enable checks to detect deadlocks and cycles
options WITNESS_SKIPSPIN # Don't run witness on spinlocks for speed
options MALLOC_DEBUG_MAXZONES=8 # Separate malloc(9) zones
Add commented out SMP stuff in GENERIC, remove stale configs.
1998-12-27 13:12:59 +00:00
Sync with i386. - turn on SMP in generic - add 'device atpic' - this is unconditional on i386, but certain nvidia based systems need to disable acpi because the reference bios seems to be hosed. If acpi is disabled, we won't find the apic. amd64 has the mptable code in a seperate compile option as well. - turn sym back on, it doesn't fail to compile anymore. Approved by: re
2003-11-19 18:11:27 +00:00
# Make an SMP-capable kernel by default
MFi386: Sync whitespace and an abbreviation
2005-02-28 23:39:58 +00:00
options SMP # Symmetric MultiProcessor Kernel
Minor sync to i386 GENERIC in the form of comments and whitespace.
2004-12-30 18:51:23 +00:00
Add cpufreq(4) to GENERIC. It does not change the frequency by default, so systems should be relatively unaffected. Users can then simply enable powerd(8) in rc.conf to take advantage of it. Approved by: re
2007-07-01 21:47:45 +00:00
# CPU frequency control
device cpufreq
MFi386: bring over DEFAULTS (repocopy) and adapt. While there isn't a 4.x->6.x amd64 upgrade path, the config files are kept in approximate sync.
2005-10-27 18:54:43 +00:00
# Bus support.
Converge with i386/GENERIC
2003-11-08 03:17:36 +00:00
device acpi
Import the driver for VT-d DMAR hardware, as specified in the revision 1.3 of Intelб╝ Virtualization Technology for Directed I/O Architecture Specification. The Extended Context and PASIDs from the rev. 2.2 are not supported, but I am not aware of any released hardware which implements them. Code does not use queued invalidation, see comments for the reason, and does not provide interrupt remapping services. Code implements the management of the guest address space per domain and allows to establish and tear down arbitrary mappings, but not partial unmapping. The superpages are created as needed, but not promoted. Faults are recorded, fault records could be obtained programmatically, and printed on the console. Implement the busdma(9) using DMARs. This busdma backend avoids bouncing and provides security against misbehaving hardware and driver bad programming, preventing leaks and corruption of the memory by wild DMA accesses. By default, the implementation is compiled into amd64 GENERIC kernel but disabled; to enable, set hw.dmar.enable=1 loader tunable. Code is written to work on i386, but testing there was low priority, and driver is not enabled in GENERIC. Even with the DMAR turned on, individual devices could be directed to use the bounce busdma with the hw.busdma.pci<domain>:<bus>:<device>:<function>.bounce=1 tunable. If DMARs are capable of the pass-through translations, it is used, otherwise, an identity-mapping page table is constructed. The driver was tested on Xeon 5400/5500 chipset legacy machine, Haswell desktop and E5 SandyBridge dual-socket boxes, with ahci(4), ata(4), bce(4), ehci(4), mfi(4), uhci(4), xhci(4) devices. It also works with em(4) and igb(4), but there some fixes are needed for drivers, which are not committed yet. Intel GPUs do not work with DMAR (yet). Many thanks to John Baldwin, who explained me the newbus integration; Peter Holm, who did all testing and helped me to discover and understand several incredible bugs; and to Jim Harris for the access to the EDS and BWG and for listening when I have to explain my findings to somebody. Sponsored by: The FreeBSD Foundation MFC after: 1 month
2013-10-28 13:33:29 +00:00
options ACPI_DMAR
de-count pci
2002-07-23 06:38:47 +00:00
device pci
Implement interface to create SR-IOV Virtual Functions Implement the interace to create SR-IOV Virtual Functions (VFs). When a driver registers that they support SR-IOV by calling pci_setup_iov(), the SR-IOV code creates a new node in /dev/iov for that device. An ioctl can be invoked on that device to create VFs and have the driver initialize them. At this point, allocating memory I/O windows (BARs) is not supported. Differential Revision: https://reviews.freebsd.org/D76 Reviewed by: jhb MFC after: 1 month Sponsored by: Sandvine Inc.
2015-03-01 00:40:09 +00:00
options PCI_IOV # PCI SR-IOV support
Sync with i386 - add everything that compiles. There are a few drivers that are trivially easy to fix (eg: ips) that I've not committed fixes for.
2003-06-26 03:49:54 +00:00
# Floppy drives
device fdc
GENERIC is our new all singing and dancing kernel. Please report ASAP if there is anything GENERICAH or GENERICBT can, which this one cannot. MINI changed to reflect the SCSI-pecking-order.
1994-10-17 21:10:20 +00:00
Switch the GENERIC kernels for all architectures to the new CAM-based ATA stack. It means that all legacy ATA drivers are disabled and replaced by respective CAM drivers. If you are using ATA device names in /etc/fstab or other places, make sure to update them respectively (adX -> adaY, acdX -> cdY, afdX -> daY, astX -> saY, where 'Y's are the sequential numbers for each type in order of detection, unless configured otherwise with tunables, see cam(4)). ataraid(4) functionality is now supported by the RAID GEOM class. To use it you can load geom_raid kernel module and use graid(8) tool for management. Instead of /dev/arX device names, use /dev/raid/rX.
2011-04-24 08:58:58 +00:00
# ATA controllers
Align all comments in config files on same column. This consistency helps when bits and pieces of GENERIC from i386 or amd64 are cut and pasted into other architecture's config files (which in the case of ARM had gotten rather akimbo).
2014-03-16 15:22:52 +00:00
device ahci # AHCI-compatible SATA controllers
device ata # Legacy ATA/SATA controllers
options ATA_STATIC_ID # Static device numbering
device mvs # Marvell 88SX50XX/88SX60XX/88SX70XX/SoC SATA
device siis # SiliconImage SiI3124/SiI3132/SiI3531 SATA
Revert previous commit. Not all RAID controllers are SCSI.
2000-07-29 02:12:44 +00:00
Sync with i386 - add everything that compiles. There are a few drivers that are trivially easy to fix (eg: ips) that I've not committed fixes for.
2003-06-26 03:49:54 +00:00
# SCSI Controllers
Align all comments in config files on same column. This consistency helps when bits and pieces of GENERIC from i386 or amd64 are cut and pasted into other architecture's config files (which in the case of ARM had gotten rather akimbo).
2014-03-16 15:22:52 +00:00
device ahc # AHA2940 and onboard AIC7xxx devices
Move AHC_REG_PRETTY_PRINT and AHD_REG_PRETTY_PRINT below their corresponding devices.
2006-04-24 08:44:34 +00:00
options AHC_REG_PRETTY_PRINT # Print register bitfields in debug
# output. Adds ~128k to driver.
Align all comments in config files on same column. This consistency helps when bits and pieces of GENERIC from i386 or amd64 are cut and pasted into other architecture's config files (which in the case of ARM had gotten rather akimbo).
2014-03-16 15:22:52 +00:00
device ahd # AHA39320/29320 and onboard AIC79xx devices
Move AHC_REG_PRETTY_PRINT and AHD_REG_PRETTY_PRINT below their corresponding devices.
2006-04-24 08:44:34 +00:00
options AHD_REG_PRETTY_PRINT # Print register bitfields in debug
# output. Adds ~215k to driver.
Align all comments in config files on same column. This consistency helps when bits and pieces of GENERIC from i386 or amd64 are cut and pasted into other architecture's config files (which in the case of ARM had gotten rather akimbo).
2014-03-16 15:22:52 +00:00
device esp # AMD Am53C974 (Tekram DC-390(T))
device hptiop # Highpoint RocketRaid 3xxx series
device isp # Qlogic family
#device ispfw # Firmware for QLogic HBAs- normally a module
device mpt # LSI-Logic MPT-Fusion
device mps # LSI-Logic MPT-Fusion 2
Bring in the mpr(4) driver for LSI's MPT3 12Gb SAS controllers. This is derived from the mps(4) driver, but it supports only the 12Gb IT and IR hardware including the SAS 3004, SAS 3008 and SAS 3108. Some notes about this driver: o The 12Gb hardware can do "FastPath" I/O, and that capability is included in this driver. o WarpDrive functionality has been removed, since it isn't supported in the 12Gb driver interface. o The Scatter/Gather list handling code is significantly different between the 6Gb and 12Gb hardware. The 12Gb boards support IEEE Scatter/Gather lists. Thanks to LSI for developing and testing this driver for FreeBSD. share/man/man4/mpr.4: mpr(4) man page. sys/dev/mpr/*: mpr(4) driver files. sys/modules/Makefile, sys/modules/mpr/Makefile: Add a module Makefile for the mpr(4) driver. sys/conf/files: Add the mpr(4) driver. sys/amd64/conf/GENERIC, sys/i386/conf/GENERIC, sys/mips/conf/OCTEON1, sys/sparc64/conf/GENERIC: Add the mpr(4) driver to all config files that currently have the mps(4) driver. sys/ia64/conf/GENERIC: Add the mps(4) and mpr(4) drivers to the ia64 GENERIC config file. sys/i386/conf/XEN: Exclude the mpr module from building here. Submitted by: Steve McConnell <Stephen.McConnell@lsi.com> MFC after: 3 days Tested by: Chris Reeves <chrisr@spectralogic.com> Sponsored by: LSI, Spectra Logic Relnotes: LSI 12Gb SAS driver mpr(4) added
2014-05-02 20:25:09 +00:00
device mpr # LSI-Logic MPT-Fusion 3
Align all comments in config files on same column. This consistency helps when bits and pieces of GENERIC from i386 or amd64 are cut and pasted into other architecture's config files (which in the case of ARM had gotten rather akimbo).
2014-03-16 15:22:52 +00:00
#device ncr # NCR/Symbios Logic
device sym # NCR/Symbios Logic (newer chipsets + those of `ncr')
device trm # Tekram DC395U/UW/F DC315U adapters
device adv # Advansys SCSI adapters
device adw # Advansys wide SCSI adapters
device aic # Adaptec 15[012]x SCSI adapters, AIC-6[23]60.
device bt # Buslogic/Mylex MultiMaster SCSI adapters
device isci # Intel C600 SAS controller
Sync with i386 - add everything that compiles. There are a few drivers that are trivially easy to fix (eg: ips) that I've not committed fixes for.
2003-06-26 03:49:54 +00:00
Switch the GENERIC kernels for all architectures to the new CAM-based ATA stack. It means that all legacy ATA drivers are disabled and replaced by respective CAM drivers. If you are using ATA device names in /etc/fstab or other places, make sure to update them respectively (adX -> adaY, acdX -> cdY, afdX -> daY, astX -> saY, where 'Y's are the sequential numbers for each type in order of detection, unless configured otherwise with tunables, see cam(4)). ataraid(4) functionality is now supported by the RAID GEOM class. To use it you can load geom_raid kernel module and use graid(8) tool for management. Instead of /dev/arX device names, use /dev/raid/rX.
2011-04-24 08:58:58 +00:00
# ATA/SCSI peripherals
Align all comments in config files on same column. This consistency helps when bits and pieces of GENERIC from i386 or amd64 are cut and pasted into other architecture's config files (which in the case of ARM had gotten rather akimbo).
2014-03-16 15:22:52 +00:00
device scbus # SCSI bus (required for ATA/SCSI)
device ch # SCSI media changers
device da # Direct Access (disks)
device sa # Sequential Access (tape etc)
device cd # CD
device pass # Passthrough device (direct ATA/SCSI access)
device ses # Enclosure Services (SES and SAF-TE)
#device ctl # CAM Target Layer
Sync with i386 - add everything that compiles. There are a few drivers that are trivially easy to fix (eg: ips) that I've not committed fixes for.
2003-06-26 03:49:54 +00:00
Converge with i386/GENERIC
2003-11-08 03:17:36 +00:00
# RAID controllers interfaced to the SCSI subsystem
Align all comments in config files on same column. This consistency helps when bits and pieces of GENERIC from i386 or amd64 are cut and pasted into other architecture's config files (which in the case of ARM had gotten rather akimbo).
2014-03-16 15:22:52 +00:00
device amr # AMI MegaRAID
device arcmsr # Areca SATA II RAID
device ciss # Compaq Smart RAID 5*
device dpt # DPT Smartcache III, IV - See NOTES for options
device hptmv # Highpoint RocketRAID 182x
device hptnr # Highpoint DC7280, R750
device hptrr # Highpoint RocketRAID 17xx, 22xx, 23xx, 25xx
device hpt27xx # Highpoint RocketRAID 27xx
device iir # Intel Integrated RAID
device ips # IBM (Adaptec) ServeRAID
device mly # Mylex AcceleRAID/eXtremeRAID
device twa # 3ware 9000 series PATA/SATA RAID
device tws # LSI 3ware 9750 SATA+SAS 6Gb/s RAID controller
Converge with i386/GENERIC
2003-11-08 03:17:36 +00:00
Sync with i386 - add everything that compiles. There are a few drivers that are trivially easy to fix (eg: ips) that I've not committed fixes for.
2003-06-26 03:49:54 +00:00
# RAID controllers
Align all comments in config files on same column. This consistency helps when bits and pieces of GENERIC from i386 or amd64 are cut and pasted into other architecture's config files (which in the case of ARM had gotten rather akimbo).
2014-03-16 15:22:52 +00:00
device aac # Adaptec FSA RAID
device aacp # SCSI passthrough for aac (requires CAM)
device aacraid # Adaptec by PMC RAID
device ida # Compaq Smart RAID
device mfi # LSI MegaRAID SAS
device mlx # Mylex DAC960 family
Add mrsas(4) to GENERIC for i386 and amd64. Approved by: ambrisko, kadesai MFC after: 3 days
2014-09-04 21:06:33 +00:00
device mrsas # LSI/Avago MegaRAID SAS/SATA, 6Gb/s and 12Gb/s
Sync with i386 - add everything that compiles. There are a few drivers that are trivially easy to fix (eg: ips) that I've not committed fixes for.
2003-06-26 03:49:54 +00:00
#XXX pointer/int warnings
Align all comments in config files on same column. This consistency helps when bits and pieces of GENERIC from i386 or amd64 are cut and pasted into other architecture's config files (which in the case of ARM had gotten rather akimbo).
2014-03-16 15:22:52 +00:00
#device pst # Promise Supertrak SX6000
device twe # 3ware ATA RAID
Sync with i386 - add everything that compiles. There are a few drivers that are trivially easy to fix (eg: ips) that I've not committed fixes for.
2003-06-26 03:49:54 +00:00
Add nvme and nvd drivers to GENERIC for amd64 and i386. MFC after: 3 days Sponsored by: Intel
2015-05-14 20:19:22 +00:00
# NVM Express (NVMe) support
device nvme # base NVMe driver
device nvd # expose NVMe namespaces as disks, depends on nvme
Spelling police
1999-04-19 10:18:34 +00:00
# atkbdc0 controls both the keyboard and the PS/2 mouse
Align all comments in config files on same column. This consistency helps when bits and pieces of GENERIC from i386 or amd64 are cut and pasted into other architecture's config files (which in the case of ARM had gotten rather akimbo).
2014-03-16 15:22:52 +00:00
device atkbdc # AT keyboard controller
device atkbd # AT keyboard
device psm # PS/2 mouse
The first stage of console driver reorganization: activate new keyboard and video card drivers. Because of the changes, you are required to update your kernel configuration file now! The files in sys/dev/syscons are still i386-specific (but less so than before), and won't compile for alpha and PC98 yet. syscons still directly accesses the video card registers here and there; this will be rectified in the later stages.
1999-01-11 03:18:56 +00:00
Align all comments in config files on same column. This consistency helps when bits and pieces of GENERIC from i386 or amd64 are cut and pasted into other architecture's config files (which in the case of ARM had gotten rather akimbo).
2014-03-16 15:22:52 +00:00
device kbdmux # keyboard multiplexer
Add kbdmux(4) to GENERIC on amd64 Requested by: scottl Tested by: scottl
2006-03-31 23:04:48 +00:00
Align all comments in config files on same column. This consistency helps when bits and pieces of GENERIC from i386 or amd64 are cut and pasted into other architecture's config files (which in the case of ARM had gotten rather akimbo).
2014-03-16 15:22:52 +00:00
device vga # VGA video card driver
options VESA # Add support for VESA BIOS Extensions (VBE)
The first stage of console driver reorganization: activate new keyboard and video card drivers. Because of the changes, you are required to update your kernel configuration file now! The files in sys/dev/syscons are still i386-specific (but less so than before), and won't compile for alpha and PC98 yet. syscons still directly accesses the video card registers here and there; this will be rectified in the later stages.
1999-01-11 03:18:56 +00:00
Align all comments in config files on same column. This consistency helps when bits and pieces of GENERIC from i386 or amd64 are cut and pasted into other architecture's config files (which in the case of ARM had gotten rather akimbo).
2014-03-16 15:22:52 +00:00
device splash # Splash screen and screen saver support
The first stage of console driver reorganization: activate new keyboard and video card drivers. Because of the changes, you are required to update your kernel configuration file now! The files in sys/dev/syscons are still i386-specific (but less so than before), and won't compile for alpha and PC98 yet. syscons still directly accesses the video card registers here and there; this will be rectified in the later stages.
1999-01-11 03:18:56 +00:00
Part 1 of pcvt/voxware revival. I hope I have not clobbered any other deltas, but it is possible since I had a few merge conflicts over the last few days while this has been sitting ready to go. Approved by: core
1999-01-01 08:09:58 +00:00
# syscons is the default console driver, resembling an SCO console
Turn syscons on now that it works, so that anybody trying to run this can see something. Probing for keyboard still works for auto serial console mode.
2003-05-09 18:26:06 +00:00
device sc
Align all comments in config files on same column. This consistency helps when bits and pieces of GENERIC from i386 or amd64 are cut and pasted into other architecture's config files (which in the case of ARM had gotten rather akimbo).
2014-03-16 15:22:52 +00:00
options SC_PIXEL_MODE # add support for the raster text mode
Include three lines about the pcvt console driver, so we don't ever need a different config file for it.
1995-02-15 20:38:36 +00:00
Add vt(4) to GENERIC and retire the separate VT config vt(4) and sc(4) can now coexist in the same kernel. To choose the vt driver, set the loader tunable kern.vty=vt .
2014-06-30 16:18:38 +00:00
# vt is the new video console driver
device vt
device vt_vga
device vt_efifb
Align all comments in config files on same column. This consistency helps when bits and pieces of GENERIC from i386 or amd64 are cut and pasted into other architecture's config files (which in the case of ARM had gotten rather akimbo).
2014-03-16 15:22:52 +00:00
device agp # support several AGP chipsets
Follow i386's suit and include AGP support in the generic kernel.
2005-04-13 06:00:07 +00:00
Sync with i386 - add everything that compiles. There are a few drivers that are trivially easy to fix (eg: ips) that I've not committed fixes for.
2003-06-26 03:49:54 +00:00
# PCCARD (PCMCIA) support
GRR. MFi386: white space spam
2004-01-30 03:02:45 +00:00
# PCMCIA and cardbus bridge support
Align all comments in config files on same column. This consistency helps when bits and pieces of GENERIC from i386 or amd64 are cut and pasted into other architecture's config files (which in the case of ARM had gotten rather akimbo).
2014-03-16 15:22:52 +00:00
device cbb # cardbus (yenta) bridge
device pccard # PC Card (16-bit) bus
device cardbus # CardBus (32-bit) bus
- add apm to the GENERIC kernel (disabled by default), and add some comments regarding apm to LINT - Disabled the statistics clock on machines which have an APM BIOS and have the options "APM_BROKEN_STATCLOCK" enabled (which is default in GENERIC now) - move around some of the code in clock.c dealing with the rtc to make it more obvios the effects of disabling the statistics clock Reviewed by: bde
1996-04-22 19:40:28 +00:00
Put on my asbestos suit and attempt to tidy up and add some simple docs or notes to make it much more obvious what things are for people who have not committed LINT to memory yet.
1999-06-29 18:55:53 +00:00
# Serial (COM) ports
Align all comments in config files on same column. This consistency helps when bits and pieces of GENERIC from i386 or amd64 are cut and pasted into other architecture's config files (which in the case of ARM had gotten rather akimbo).
2014-03-16 15:22:52 +00:00
device uart # Generic UART driver
GENERIC is our new all singing and dancing kernel. Please report ASAP if there is anything GENERICAH or GENERICBT can, which this one cannot. MINI changed to reflect the SCSI-pecking-order.
1994-10-17 21:10:20 +00:00
Fix typos
1999-02-11 06:07:27 +00:00
# Parallel port
Sync with i386 - add everything that compiles. There are a few drivers that are trivially easy to fix (eg: ips) that I've not committed fixes for.
2003-06-26 03:49:54 +00:00
device ppc
Align all comments in config files on same column. This consistency helps when bits and pieces of GENERIC from i386 or amd64 are cut and pasted into other architecture's config files (which in the case of ARM had gotten rather akimbo).
2014-03-16 15:22:52 +00:00
device ppbus # Parallel port bus (required)
device lpt # Printer
device ppi # Parallel port interface device
#device vpo # Requires scbus and da
Sync with i386 - add everything that compiles. There are a few drivers that are trivially easy to fix (eg: ips) that I've not committed fixes for.
2003-06-26 03:49:54 +00:00
Align all comments in config files on same column. This consistency helps when bits and pieces of GENERIC from i386 or amd64 are cut and pasted into other architecture's config files (which in the case of ARM had gotten rather akimbo).
2014-03-16 15:22:52 +00:00
device puc # Multi I/O cards and multi-channel UARTs
Sync with i386 - add everything that compiles. There are a few drivers that are trivially easy to fix (eg: ips) that I've not committed fixes for.
2003-06-26 03:49:54 +00:00
# PCI Ethernet NICs.
Align all comments in config files on same column. This consistency helps when bits and pieces of GENERIC from i386 or amd64 are cut and pasted into other architecture's config files (which in the case of ARM had gotten rather akimbo).
2014-03-16 15:22:52 +00:00
device bxe # Broadcom NetXtreme II BCM5771X/BCM578XX 10GbE
device de # DEC/Intel DC21x4x (``Tulip'')
device em # Intel PRO/1000 Gigabit Ethernet Family
device igb # Intel PRO/1000 PCIE Server Gigabit Family
Update to the Intel ixgbe driver: - Split the driver into independent pf and vf loadables. This is in preparation for SRIOV support which will be following shortly. This also allows us to keep a seperate revision control over the two parts, making for easier sustaining. - Make the TX/RX code a shared/seperated file, in the old code base the ixv code would miss fixes that went into ixgbe, this model will eliminate that problem. - The driver loadables will now match the device names, something that has been requested for some time. - Rather than a modules/ixgbe there is now modules/ix and modules/ixv - It will also be possible to make your static kernel with only one or the other for streamlined installs, or both. Enjoy! Submitted by: jfv and erj
2015-03-17 18:32:28 +00:00
device ix # Intel PRO/10GbE PCIE PF Ethernet
device ixv # Intel PRO/10GbE PCIE VF Ethernet
As per [1] Intel only supports this driver on 64bit platforms. For now restrict it to amd64. Other architectures might be re-added later once tested. Remove the drivers from the global NOTES and files files and move them to the amd64 specifics. Remove the drivers from the i386 modules build and only leave the amd64 version. Rather than depending on "inet" depend on "pci" and make sure that ixl(4) and ixlv(4) can be compiled independently [2]. This also allows the drivers to build properly on IPv4-only or IPv6-only kernels. PR: 193824 [2] Reviewed by: eric.joyner intel.com MFC after: 3 days References: [1] http://lists.freebsd.org/pipermail/svn-src-all/2014-August/090470.html
2014-09-23 08:33:03 +00:00
device ixl # Intel XL710 40Gbe PCIE Ethernet
device ixlv # Intel XL710 40Gbe VF PCIE Ethernet
Align all comments in config files on same column. This consistency helps when bits and pieces of GENERIC from i386 or amd64 are cut and pasted into other architecture's config files (which in the case of ARM had gotten rather akimbo).
2014-03-16 15:22:52 +00:00
device le # AMD Am7900 LANCE and Am79C9xx PCnet
device ti # Alteon Networks Tigon I/II gigabit Ethernet
device txp # 3Com 3cR990 (``Typhoon'')
device vx # 3Com 3c590, 3c595 (``Vortex'')
Seperate the miibus pci ethernet drivers from the non-miibus drivers so it's a little clearer which is which from just looking at GENERIC.
1999-09-09 18:30:58 +00:00
# PCI Ethernet NICs that use the common MII bus controller code.
Add a brief comment telling people to retain 'device miibus' as necessary. PR: docs/21981 Submitted by: Matthew Emmerton <matt@gsicomp.on.ca>
2000-10-28 22:32:17 +00:00
# NOTE: Be sure to keep the 'device miibus' line in order to use these NICs!
Align all comments in config files on same column. This consistency helps when bits and pieces of GENERIC from i386 or amd64 are cut and pasted into other architecture's config files (which in the case of ARM had gotten rather akimbo).
2014-03-16 15:22:52 +00:00
device miibus # MII bus support
device ae # Attansic/Atheros L2 FastEthernet
device age # Attansic/Atheros L1 Gigabit Ethernet
device alc # Atheros AR8131/AR8132 Ethernet
device ale # Atheros AR8121/AR8113/AR8114 Ethernet
device bce # Broadcom BCM5706/BCM5708 Gigabit Ethernet
device bfe # Broadcom BCM440x 10/100 Ethernet
device bge # Broadcom BCM570xx Gigabit Ethernet
device cas # Sun Cassini/Cassini+ and NS DP83065 Saturn
device dc # DEC/Intel 21143 and various workalikes
device et # Agere ET1310 10/100/Gigabit Ethernet
device fxp # Intel EtherExpress PRO/100B (82557, 82558)
device gem # Sun GEM/Sun ERI/Apple GMAC
device hme # Sun HME (Happy Meal Ethernet)
device jme # JMicron JMC250 Gigabit/JMC260 Fast Ethernet
device lge # Level 1 LXT1001 gigabit Ethernet
device msk # Marvell/SysKonnect Yukon II Gigabit Ethernet
device nfe # nVidia nForce MCP on-board Ethernet
device nge # NatSemi DP83820 gigabit Ethernet
device pcn # AMD Am79C97x PCI 10/100 (precedence over 'le')
device re # RealTek 8139C+/8169/8169S/8110S
device rl # RealTek 8129/8139
device sf # Adaptec AIC-6915 (``Starfire'')
device sge # Silicon Integrated Systems SiS190/191
device sis # Silicon Integrated Systems SiS 900/SiS 7016
device sk # SysKonnect SK-984x & SK-982x gigabit Ethernet
device ste # Sundance ST201 (D-Link DFE-550TX)
device stge # Sundance/Tamarack TC9021 gigabit Ethernet
device tl # Texas Instruments ThunderLAN
device tx # SMC EtherPower II (83c170 ``EPIC'')
device vge # VIA VT612x gigabit Ethernet
device vr # VIA Rhine, Rhine II
device wb # Winbond W89C840F
device xl # 3Com 3c90x (``Boomerang'', ``Cyclone'')
Put on my asbestos suit and attempt to tidy up and add some simple docs or notes to make it much more obvious what things are for people who have not committed LINT to memory yet.
1999-06-29 18:55:53 +00:00
Sync with i386 - add everything that compiles. There are a few drivers that are trivially easy to fix (eg: ips) that I've not committed fixes for.
2003-06-26 03:49:54 +00:00
# Wireless NIC cards
Align all comments in config files on same column. This consistency helps when bits and pieces of GENERIC from i386 or amd64 are cut and pasted into other architecture's config files (which in the case of ARM had gotten rather akimbo).
2014-03-16 15:22:52 +00:00
device wlan # 802.11 support
options IEEE80211_DEBUG # enable debug msgs
options IEEE80211_AMPDU_AGE # age frames in AMPDU reorder q's
Improve 802.11s comment. Spotted by: dougb MFC after: 1 day
2009-10-01 02:08:42 +00:00
options IEEE80211_SUPPORT_MESH # enable 802.11s draft support
Align all comments in config files on same column. This consistency helps when bits and pieces of GENERIC from i386 or amd64 are cut and pasted into other architecture's config files (which in the case of ARM had gotten rather akimbo).
2014-03-16 15:22:52 +00:00
device wlan_wep # 802.11 WEP support
device wlan_ccmp # 802.11 CCMP support
device wlan_tkip # 802.11 TKIP support
device wlan_amrr # AMRR transmit rate control algorithm
device an # Aironet 4500/4800 802.11 wireless NICs.
device ath # Atheros NICs
device ath_pci # Atheros pci/cardbus glue
device ath_hal # pci/cardbus chip support
- Use "device\t" and "options \t" for consistency.
2009-05-10 00:00:25 +00:00
options AH_SUPPORT_AR5416 # enable AR5416 tx/rx descriptors
Align all comments in config files on same column. This consistency helps when bits and pieces of GENERIC from i386 or amd64 are cut and pasted into other architecture's config files (which in the case of ARM had gotten rather akimbo).
2014-03-16 15:22:52 +00:00
options AH_AR5416_INTERRUPT_MITIGATION # AR5416 interrupt mitigation
options ATH_ENABLE_11N # Enable 802.11n support for AR5416 and later
device ath_rate_sample # SampleRate tx rate control for ath
#device bwi # Broadcom BCM430x/BCM431x wireless NICs.
#device bwn # Broadcom BCM43xx wireless NICs.
device ipw # Intel 2100 wireless NICs.
device iwi # Intel 2200BG/2225BG/2915ABG wireless NICs.
device iwn # Intel 4965/1000/5000/6000 wireless NICs.
device malo # Marvell Libertas wireless NICs.
device mwl # Marvell 88W8363 802.11n wireless NICs.
device ral # Ralink Technology RT2500 wireless NICs.
device wi # WaveLAN/Intersil/Symbol 802.11 wireless NICs.
device wpi # Intel 3945ABG wireless NICs.
Sync with i386 - add everything that compiles. There are a few drivers that are trivially easy to fix (eg: ips) that I've not committed fixes for.
2003-06-26 03:49:54 +00:00
In -CURRENT pseudo devices are not statically assigned at compile time, remove a stale comment. PR: kern/62285
2004-07-18 09:03:12 +00:00
# Pseudo devices.
Align all comments in config files on same column. This consistency helps when bits and pieces of GENERIC from i386 or amd64 are cut and pasted into other architecture's config files (which in the case of ARM had gotten rather akimbo).
2014-03-16 15:22:52 +00:00
device loop # Network loopback
device random # Entropy device
device padlock_rng # VIA Padlock RNG
device rdrand_rng # Intel Bull Mountain RNG
device ether # Ethernet support
device vlan # 802.1Q VLAN support
device tun # Packet tunnel.
device md # Memory "disks"
device gif # IPv6 and IPv4 tunneling
device firmware # firmware assist module
Sync with i386/GENERIC ordering.
2003-06-01 20:26:38 +00:00
# The `bpf' device enables the Berkeley Packet Filter.
# Be aware of the administrative consequences of enabling this!
Add a comment to note that pseudo-device bpf is required for DHCP. This is mentioned in the Handbook but it is not as obvious to new users why bpf is needed compared to the other largely self-explanatory items in GENERIC. PR: conf/40855 MFC after: 1 week
2005-03-18 15:24:00 +00:00
# Note that 'bpf' is required for DHCP.
Align all comments in config files on same column. This consistency helps when bits and pieces of GENERIC from i386 or amd64 are cut and pasted into other architecture's config files (which in the case of ARM had gotten rather akimbo).
2014-03-16 15:22:52 +00:00
device bpf # Berkeley packet filter
Initial commit of ported NetBSD USB stack
1998-11-26 23:13:13 +00:00
Change over the usb kernel options to the new stack (retaining existing naming). The old usb stack can be compiled in my prefixing the name with 'o'.
2009-02-23 18:34:56 +00:00
# USB support
Align all comments in config files on same column. This consistency helps when bits and pieces of GENERIC from i386 or amd64 are cut and pasted into other architecture's config files (which in the case of ARM had gotten rather akimbo).
2014-03-16 15:22:52 +00:00
options USB_DEBUG # enable debug msgs
device uhci # UHCI PCI->USB interface
device ohci # OHCI PCI->USB interface
device ehci # EHCI PCI->USB interface (USB 2.0)
device xhci # XHCI PCI->USB interface (USB 3.0)
device usb # USB Bus (required)
device ukbd # Keyboard
device umass # Disks/Mass storage - Requires scbus and da
Sync with i386 - add everything that compiles. There are a few drivers that are trivially easy to fix (eg: ips) that I've not committed fixes for.
2003-06-26 03:49:54 +00:00
Enable sound support by default on i386 and amd64. The generic sound driver has been added, along with enough device-specific drivers to support the most common audio chipsets. We've discussed enabling it from time to time over the years and we've received numerous requests from users, so we decided that shipping 9.0 with working audio by default would be the best thing to do. Bug reports should be sent to the multimedia@ mailing list, as usual. Approved by: mav No objection: re
2011-06-11 09:08:46 +00:00
# Sound support
Align all comments in config files on same column. This consistency helps when bits and pieces of GENERIC from i386 or amd64 are cut and pasted into other architecture's config files (which in the case of ARM had gotten rather akimbo).
2014-03-16 15:22:52 +00:00
device sound # Generic sound driver (required)
device snd_cmi # CMedia CMI8338/CMI8738
device snd_csa # Crystal Semiconductor CS461x/428x
device snd_emu10kx # Creative SoundBlaster Live! and Audigy
device snd_es137x # Ensoniq AudioPCI ES137x
device snd_hda # Intel High Definition Audio
device snd_ich # Intel, NVidia and other ICH AC'97 Audio
device snd_via8233 # VIA VT8233x Audio
Enable PCI MMC/SD support by default on i386 and amd64
2011-11-08 08:29:05 +00:00
# MMC/SD
Align all comments in config files on same column. This consistency helps when bits and pieces of GENERIC from i386 or amd64 are cut and pasted into other architecture's config files (which in the case of ARM had gotten rather akimbo).
2014-03-16 15:22:52 +00:00
device mmc # MMC/SD bus
device mmcsd # MMC/SD memory card
device sdhci # Generic PCI SD Host Controller
Add VirtIO to the i386 and amd64 GENERIC kernels This also removes the kludge from r239009 that covered only the network driver. Reviewed by: grehan Approved by: grehan (mentor) MFC after: 1 week
2013-01-13 07:14:16 +00:00
# VirtIO support
Align all comments in config files on same column. This consistency helps when bits and pieces of GENERIC from i386 or amd64 are cut and pasted into other architecture's config files (which in the case of ARM had gotten rather akimbo).
2014-03-16 15:22:52 +00:00
device virtio # Generic VirtIO bus (required)
device virtio_pci # VirtIO PCI device
device vtnet # VirtIO Ethernet device
device virtio_blk # VirtIO Block device
device virtio_scsi # VirtIO SCSI device
device virtio_balloon # VirtIO Memory Balloon device
First cut at adding the hyperv drivers to GENERIC. The files inventory should probably have the modules split out into net/storage/common etc as the modules build is, but this will do for now.
2013-07-19 05:32:58 +00:00
Microsoft vmbus, storage and other related driver enhancements for HyperV. - Vmbus multi channel support. - Vector interrupt support. - Signal optimization. - Storvsc driver performance improvement. - Scatter and gather support for storvsc driver. - Minor bug fix for KVP driver. Thanks royger, jhb and delphij from FreeBSD community for the reviews and comments. Also thanks Hovy Xu from NetApp for the contributions to the storvsc driver. PR: 195238 Submitted by: whu Reviewed by: royger, jhb, delphij Approved by: royger MFC after: 2 weeks Relnotes: yes Sponsored by: Microsoft OSTC
2015-04-29 10:12:34 +00:00
# HyperV drivers and enchancement support
# NOTE: HYPERV depends on hyperv. They must be added or removed together.
options HYPERV # Hyper-V kernel infrastructure
Align all comments in config files on same column. This consistency helps when bits and pieces of GENERIC from i386 or amd64 are cut and pasted into other architecture's config files (which in the case of ARM had gotten rather akimbo).
2014-03-16 15:22:52 +00:00
device hyperv # HyperV drivers
Put 'device hyperv' back in amd64/GENERIC, incorrectly removed with r255736. Pointed out by: gibbs Approved by: re (delphij) Sponsored by: The FreeBSD Foundation
2013-09-21 01:07:27 +00:00
Document XENHVM and xenpci are mutually inclusive. Submitted by: gibbs Approved by: re (delphij) Sponsored by: The FreeBSD Foundation
2013-10-11 19:40:28 +00:00
# Xen HVM Guest Optimizations
# NOTE: XENHVM depends on xenpci. They must be added or removed together.
Align all comments in config files on same column. This consistency helps when bits and pieces of GENERIC from i386 or amd64 are cut and pasted into other architecture's config files (which in the case of ARM had gotten rather akimbo).
2014-03-16 15:22:52 +00:00
options XENHVM # Xen HVM kernel infrastructure
device xenpci # Xen HVM Hypervisor services driver
Merge Xen PVHVM support into the GENERIC kernel config for both amd64 and i386. Submitted by: Roger Pau Monné Sponsored by: Citrix Systems R&D Reviewed by: gibbs Approved by: re (blanket Xen) MFC after: 2 weeks sys/amd64/amd64/mp_machdep.c: sys/amd64/include/cpu.h: sys/i386/i386/mp_machdep.c: sys/i386/include/cpu.h: - Introduce two new CPU hooks for initialization and resume purposes. This allows us to get rid of the XENHVM ifdefs in mp_machdep, and also sets some hooks into common code that can be used by other hypervisor implementations. sys/amd64/conf/XENHVM: sys/i386/conf/XENHVM: - Remove these configs now that GENERIC has builtin support for Xen HVM. sys/kern/subr_smp.c: - Make sure there are no pending IPIs when suspending a system. sys/x86/xen/hvm.c: - Add cpu init and resume vectors that are called from mp_machdep using the new hooks. - Only clear the vcpu_info mapping data on resume. It is already clear for the BSP on a cold boot and is set correctly as APs are started. - Gate xen_hvm_init_cpu only to systems running under Xen. sys/x86/xen/xen_intr.c: - Gate the setup of event channels only to systems running under Xen.
2013-09-20 22:59:22 +00:00
Add vmx(4) to i386 and amd64 GENERIC Approved by: re (gjb)
2013-09-17 01:54:13 +00:00
# VMware support
Align all comments in config files on same column. This consistency helps when bits and pieces of GENERIC from i386 or amd64 are cut and pasted into other architecture's config files (which in the case of ARM had gotten rather akimbo).
2014-03-16 15:22:52 +00:00
device vmx # VMware VMXNET3 Ethernet
Add support for netmap in GENERIC by default.
2014-11-05 06:22:37 +00:00
# Netmap provides direct access to TX/RX rings on supported NICs
device netmap # netmap(4) support
Reference in New Issue Copy Permalink