Bring in Andrew Thompson's port of Sepherosa Ziehau's bwi driver for
Broadcom BCM43xx chipsets. This driver uses the v3 firmware that
needs to be fetched separately. A port will be committed to create
the bwi firmware module.
The driver matches the following chips: Broadcom BCM4301, BCM4307,
BCM4306, BCM4309, BCM4311, BCM4312, BCM4318, BCM4319
The driver works for 802.11b and 802.11g.
Limitations:
This doesn't support the 802.11a or 802.11n portion of radios.
Some BCM4306 and BCM4309 cards don't work with Channel 1, 2 or 3.
Documenation for this firmware is reverse engineered from
http://bcm.sipsolutions.net/
V4 of the firmware is needed for 11a or 11n support
http://bcm-v4.sipsolutions.net/
Firmware needs to be fetched from a third party, port to be committed
# I've tested this with a BCM4319 mini-pci and a BCM4318 CardBus card, and
# not connected it to the build until the firmware port is committed.
Obtained from: DragonFlyBSD, //depot/projects/vap
Reviewed by: sam@, thompsa@
2009-05-03 04:01:43 +00:00
|
|
|
/*-
|
|
|
|
* Copyright (c) 2002-2007 Sam Leffler, Errno Consulting
|
|
|
|
* All rights reserved.
|
|
|
|
*
|
|
|
|
* Redistribution and use in source and binary forms, with or without
|
|
|
|
* modification, are permitted provided that the following conditions
|
|
|
|
* are met:
|
|
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
|
|
* notice, this list of conditions and the following disclaimer,
|
|
|
|
* without modification.
|
|
|
|
* 2. Redistributions in binary form must reproduce at minimum a disclaimer
|
|
|
|
* similar to the "NO WARRANTY" disclaimer below ("Disclaimer") and any
|
|
|
|
* redistribution must be conditioned upon including a substantially
|
|
|
|
* similar Disclaimer requirement for further binary redistribution.
|
|
|
|
*
|
|
|
|
* NO WARRANTY
|
|
|
|
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
|
|
|
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
|
|
|
* LIMITED TO, THE IMPLIED WARRANTIES OF NONINFRINGEMENT, MERCHANTIBILITY
|
|
|
|
* AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL
|
|
|
|
* THE COPYRIGHT HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY,
|
|
|
|
* OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
|
|
|
|
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
|
|
|
|
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER
|
|
|
|
* IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
|
|
|
|
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
|
|
|
|
* THE POSSIBILITY OF SUCH DAMAGES.
|
|
|
|
*/
|
|
|
|
|
|
|
|
#include <sys/cdefs.h>
|
|
|
|
__FBSDID("$FreeBSD$");
|
|
|
|
|
|
|
|
/*
|
|
|
|
* PCI/Cardbus front-end for the Broadcom Wireless LAN controller driver.
|
|
|
|
*/
|
|
|
|
|
|
|
|
#include <sys/param.h>
|
|
|
|
#include <sys/systm.h>
|
|
|
|
#include <sys/module.h>
|
|
|
|
#include <sys/kernel.h>
|
|
|
|
#include <sys/lock.h>
|
|
|
|
#include <sys/mutex.h>
|
|
|
|
#include <sys/errno.h>
|
|
|
|
|
|
|
|
#include <machine/bus.h>
|
|
|
|
#include <machine/resource.h>
|
|
|
|
#include <sys/bus.h>
|
|
|
|
#include <sys/rman.h>
|
|
|
|
|
|
|
|
#include <sys/socket.h>
|
|
|
|
|
|
|
|
#include <net/if.h>
|
|
|
|
#include <net/if_media.h>
|
|
|
|
#include <net/if_arp.h>
|
|
|
|
|
|
|
|
#include <net80211/ieee80211_var.h>
|
|
|
|
#include <net80211/ieee80211_radiotap.h>
|
|
|
|
#include <net80211/ieee80211_amrr.h>
|
|
|
|
|
|
|
|
#include <dev/pci/pcivar.h>
|
|
|
|
#include <dev/pci/pcireg.h>
|
|
|
|
|
|
|
|
#include <dev/bwi/if_bwivar.h>
|
|
|
|
#include <dev/bwi/if_bwireg.h>
|
|
|
|
#include <dev/bwi/bitops.h>
|
|
|
|
|
|
|
|
/*
|
|
|
|
* PCI glue.
|
|
|
|
*/
|
|
|
|
|
|
|
|
struct bwi_pci_softc {
|
|
|
|
struct bwi_softc sc_sc;
|
|
|
|
};
|
|
|
|
|
|
|
|
#define BS_BAR 0x10
|
|
|
|
#define PCIR_RETRY_TIMEOUT 0x41
|
|
|
|
|
|
|
|
static const struct bwi_dev {
|
|
|
|
uint16_t vid;
|
|
|
|
uint16_t did;
|
|
|
|
const char *desc;
|
|
|
|
} bwi_devices[] = {
|
2009-05-18 01:00:11 +00:00
|
|
|
{ PCI_VENDOR_BROADCOM, 0x4301,"Broadcom BCM4301 802.11b Wireless Lan" },
|
|
|
|
{ PCI_VENDOR_BROADCOM, 0x4307,"Broadcom BCM4307 802.11b Wireless Lan" },
|
|
|
|
{ PCI_VENDOR_BROADCOM, 0x4311,"Broadcom BCM4311 802.11b/g Wireless Lan" },
|
|
|
|
{ PCI_VENDOR_BROADCOM, 0x4312,"Broadcom BCM4312 802.11a/b/g Wireless Lan" },
|
|
|
|
{ PCI_VENDOR_BROADCOM, 0x4313,"Broadcom BCM4312 802.11a Wireless Lan" },
|
|
|
|
{ PCI_VENDOR_BROADCOM, 0x4320,"Broadcom BCM4306 802.11b/g Wireless Lan"},
|
|
|
|
{ PCI_VENDOR_BROADCOM, 0x4321,"Broadcom BCM4306 802.11a Wireless Lan"},
|
|
|
|
{ PCI_VENDOR_BROADCOM, 0x4325,"Broadcom BCM4306 802.11b/g Wireless Lan"},
|
|
|
|
{ PCI_VENDOR_BROADCOM, 0x4324,"Broadcom BCM4309 802.11a/b/g Wireless Lan" },
|
|
|
|
{ PCI_VENDOR_BROADCOM, 0x4318,"Broadcom BCM4318 802.11b/g Wireless Lan" },
|
|
|
|
{ PCI_VENDOR_BROADCOM, 0x4319,"Broadcom BCM4318 802.11a/b/g Wireless Lan" },
|
|
|
|
{ PCI_VENDOR_BROADCOM, 0x431a,"Broadcom BCM4318 802.11a Wireless Lan" }
|
Bring in Andrew Thompson's port of Sepherosa Ziehau's bwi driver for
Broadcom BCM43xx chipsets. This driver uses the v3 firmware that
needs to be fetched separately. A port will be committed to create
the bwi firmware module.
The driver matches the following chips: Broadcom BCM4301, BCM4307,
BCM4306, BCM4309, BCM4311, BCM4312, BCM4318, BCM4319
The driver works for 802.11b and 802.11g.
Limitations:
This doesn't support the 802.11a or 802.11n portion of radios.
Some BCM4306 and BCM4309 cards don't work with Channel 1, 2 or 3.
Documenation for this firmware is reverse engineered from
http://bcm.sipsolutions.net/
V4 of the firmware is needed for 11a or 11n support
http://bcm-v4.sipsolutions.net/
Firmware needs to be fetched from a third party, port to be committed
# I've tested this with a BCM4319 mini-pci and a BCM4318 CardBus card, and
# not connected it to the build until the firmware port is committed.
Obtained from: DragonFlyBSD, //depot/projects/vap
Reviewed by: sam@, thompsa@
2009-05-03 04:01:43 +00:00
|
|
|
};
|
|
|
|
|
|
|
|
static int
|
|
|
|
bwi_pci_probe(device_t dev)
|
|
|
|
{
|
|
|
|
const struct bwi_dev *b;
|
|
|
|
uint16_t did, vid;
|
|
|
|
|
|
|
|
did = pci_get_device(dev);
|
|
|
|
vid = pci_get_vendor(dev);
|
|
|
|
|
|
|
|
for (b = bwi_devices; b->desc != NULL; ++b) {
|
|
|
|
if (b->did == did && b->vid == vid) {
|
|
|
|
device_set_desc(dev, b->desc);
|
|
|
|
return BUS_PROBE_DEFAULT;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
return ENXIO;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int
|
|
|
|
bwi_pci_attach(device_t dev)
|
|
|
|
{
|
|
|
|
struct bwi_pci_softc *psc = device_get_softc(dev);
|
|
|
|
struct bwi_softc *sc = &psc->sc_sc;
|
|
|
|
int error = ENXIO;
|
|
|
|
|
|
|
|
sc->sc_dev = dev;
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Enable bus mastering.
|
|
|
|
*/
|
|
|
|
pci_enable_busmaster(dev);
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Setup memory-mapping of PCI registers.
|
|
|
|
*/
|
|
|
|
sc->sc_mem_rid = BWI_PCIR_BAR;
|
|
|
|
sc->sc_mem_res = bus_alloc_resource_any(dev, SYS_RES_MEMORY,
|
|
|
|
&sc->sc_mem_rid, RF_ACTIVE);
|
|
|
|
if (sc->sc_mem_res == NULL) {
|
|
|
|
device_printf(dev, "cannot map register space\n");
|
|
|
|
goto bad;
|
|
|
|
}
|
|
|
|
sc->sc_mem_bt = rman_get_bustag(sc->sc_mem_res);
|
|
|
|
sc->sc_mem_bh = rman_get_bushandle(sc->sc_mem_res);
|
|
|
|
/*
|
|
|
|
* Mark device invalid so any interrupts (shared or otherwise)
|
|
|
|
* that arrive before the card is setup are discarded.
|
|
|
|
*/
|
|
|
|
sc->sc_invalid = 1;
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Arrange interrupt line.
|
|
|
|
*/
|
|
|
|
sc->sc_irq_rid = 0;
|
|
|
|
sc->sc_irq_res = bus_alloc_resource_any(dev, SYS_RES_IRQ,
|
|
|
|
&sc->sc_irq_rid,
|
|
|
|
RF_SHAREABLE|RF_ACTIVE);
|
|
|
|
if (sc->sc_irq_res == NULL) {
|
|
|
|
device_printf(dev, "could not map interrupt\n");
|
|
|
|
goto bad1;
|
|
|
|
}
|
|
|
|
if (bus_setup_intr(dev, sc->sc_irq_res,
|
|
|
|
INTR_TYPE_NET | INTR_MPSAFE,
|
|
|
|
NULL, bwi_intr, sc, &sc->sc_irq_handle)) {
|
|
|
|
device_printf(dev, "could not establish interrupt\n");
|
|
|
|
goto bad2;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Get more PCI information */
|
|
|
|
sc->sc_pci_did = pci_get_device(dev);
|
|
|
|
sc->sc_pci_revid = pci_get_revid(dev);
|
|
|
|
sc->sc_pci_subvid = pci_get_subvendor(dev);
|
|
|
|
sc->sc_pci_subdid = pci_get_subdevice(dev);
|
|
|
|
|
|
|
|
error = bwi_attach(sc);
|
|
|
|
if (error == 0) /* success */
|
|
|
|
return 0;
|
|
|
|
|
|
|
|
bus_teardown_intr(dev, sc->sc_irq_res, sc->sc_irq_handle);
|
|
|
|
bad2:
|
|
|
|
bus_release_resource(dev, SYS_RES_IRQ, 0, sc->sc_irq_res);
|
|
|
|
bad1:
|
|
|
|
bus_release_resource(dev, SYS_RES_MEMORY, BS_BAR, sc->sc_mem_res);
|
|
|
|
bad:
|
|
|
|
return (error);
|
|
|
|
}
|
|
|
|
|
|
|
|
static int
|
|
|
|
bwi_pci_detach(device_t dev)
|
|
|
|
{
|
|
|
|
struct bwi_pci_softc *psc = device_get_softc(dev);
|
|
|
|
struct bwi_softc *sc = &psc->sc_sc;
|
|
|
|
|
|
|
|
/* check if device was removed */
|
|
|
|
sc->sc_invalid = !bus_child_present(dev);
|
|
|
|
|
|
|
|
bwi_detach(sc);
|
|
|
|
|
|
|
|
bus_generic_detach(dev);
|
|
|
|
bus_teardown_intr(dev, sc->sc_irq_res, sc->sc_irq_handle);
|
|
|
|
bus_release_resource(dev, SYS_RES_IRQ, 0, sc->sc_irq_res);
|
|
|
|
|
|
|
|
bus_release_resource(dev, SYS_RES_MEMORY, BS_BAR, sc->sc_mem_res);
|
|
|
|
|
|
|
|
return (0);
|
|
|
|
}
|
|
|
|
|
|
|
|
static int
|
|
|
|
bwi_pci_shutdown(device_t dev)
|
|
|
|
{
|
|
|
|
struct bwi_pci_softc *psc = device_get_softc(dev);
|
|
|
|
|
|
|
|
bwi_shutdown(&psc->sc_sc);
|
|
|
|
return (0);
|
|
|
|
}
|
|
|
|
|
|
|
|
static int
|
|
|
|
bwi_pci_suspend(device_t dev)
|
|
|
|
{
|
|
|
|
struct bwi_pci_softc *psc = device_get_softc(dev);
|
|
|
|
|
|
|
|
bwi_suspend(&psc->sc_sc);
|
|
|
|
|
|
|
|
return (0);
|
|
|
|
}
|
|
|
|
|
|
|
|
static int
|
|
|
|
bwi_pci_resume(device_t dev)
|
|
|
|
{
|
|
|
|
struct bwi_pci_softc *psc = device_get_softc(dev);
|
|
|
|
|
|
|
|
bwi_resume(&psc->sc_sc);
|
|
|
|
|
|
|
|
return (0);
|
|
|
|
}
|
|
|
|
|
|
|
|
static device_method_t bwi_pci_methods[] = {
|
|
|
|
/* Device interface */
|
|
|
|
DEVMETHOD(device_probe, bwi_pci_probe),
|
|
|
|
DEVMETHOD(device_attach, bwi_pci_attach),
|
|
|
|
DEVMETHOD(device_detach, bwi_pci_detach),
|
|
|
|
DEVMETHOD(device_shutdown, bwi_pci_shutdown),
|
|
|
|
DEVMETHOD(device_suspend, bwi_pci_suspend),
|
|
|
|
DEVMETHOD(device_resume, bwi_pci_resume),
|
|
|
|
|
|
|
|
{ 0,0 }
|
|
|
|
};
|
|
|
|
static driver_t bwi_driver = {
|
|
|
|
"bwi",
|
|
|
|
bwi_pci_methods,
|
|
|
|
sizeof (struct bwi_pci_softc)
|
|
|
|
};
|
|
|
|
static devclass_t bwi_devclass;
|
2009-05-15 16:38:42 +00:00
|
|
|
DRIVER_MODULE(bwi, pci, bwi_driver, bwi_devclass, 0, 0);
|
|
|
|
MODULE_DEPEND(bwi, wlan, 1, 1, 1); /* 802.11 media layer */
|
|
|
|
MODULE_DEPEND(bwi, firmware, 1, 1, 1); /* firmware support */
|
|
|
|
MODULE_DEPEND(bwi, wlan_amrr, 1, 1, 1);
|