d/freebsd-dev
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
ecea5be464
freebsd-dev/sys/ufs/ffs/ffs_snapshot.c

2678 lines
73 KiB
C
Raw Normal View History

/* -> /*- for license, minor formatting changes
2005-01-07 02:29:27 +00:00
/*-
Add snapshots to the fast filesystem. Most of the changes support the gating of system calls that cause modifications to the underlying filesystem. The gating can be enabled by any filesystem that needs to consistently suspend operations by adding the vop_stdgetwritemount to their set of vnops. Once gating is enabled, the function vfs_write_suspend stops all new write operations to a filesystem, allows any filesystem modifying system calls already in progress to complete, then sync's the filesystem to disk and returns. The function vfs_write_resume allows the suspended write operations to begin again. Gating is not added by default for all filesystems as for SMP systems it adds two extra locks to such critical kernel paths as the write system call. Thus, gating should only be added as needed. Details on the use and current status of snapshots in FFS can be found in /sys/ufs/ffs/README.snapshot so for brevity and timelyness is not included here. Unless and until you create a snapshot file, these changes should have no effect on your system (famous last words).
2000-07-11 22:07:57 +00:00
* Copyright 2000 Marshall Kirk McKusick. All Rights Reserved.
*
* Further information about snapshots can be obtained from:
*
* Marshall Kirk McKusick http://www.mckusick.com/softdep/
* 1614 Oxford Street mckusick@mckusick.com
* Berkeley, CA 94709-1608 +1-510-843-9542
* USA
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY MARSHALL KIRK MCKUSICK ``AS IS'' AND ANY
* EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL MARSHALL KIRK MCKUSICK BE LIABLE FOR
* ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
This patch corrects the first round of panics and hangs reported with the new snapshot code. Update addaliasu to correctly implement the semantics of the old checkalias function. When a device vnode first comes into existence, check to see if an anonymous vnode for the same device was created at boot time by bdevvp(). If so, adopt the bdevvp vnode rather than creating a new vnode for the device. This corrects a problem which caused the kernel to panic when taking a snapshot of the root filesystem. Change the calling convention of vn_write_suspend_wait() to be the same as vn_start_write(). Split out softdep_flushworklist() from softdep_flushfiles() so that it can be used to clear the work queue when suspending filesystem operations. Access to buffers becomes recursive so that snapshots can recursively traverse their indirect blocks using ffs_copyonwrite() when checking for the need for copy on write when flushing one of their own indirect blocks. This eliminates a deadlock between the syncer daemon and a process taking a snapshot. Ensure that softdep_process_worklist() can never block because of a snapshot being taken. This eliminates a problem with buffer starvation. Cleanup change in ffs_sync() which did not synchronously wait when MNT_WAIT was specified. The result was an unclean filesystem panic when doing forcible unmount with heavy filesystem I/O in progress. Return a zero'ed block when reading a block that was not in use at the time that a snapshot was taken. Normally, these blocks should never be read. However, the readahead code will occationally read them which can cause unexpected behavior. Clean up the debugging code that ensures that no blocks be written on a filesystem while it is suspended. Snapshots must explicitly label the blocks that they are writing during the suspension so that they do not cause a `write on suspended filesystem' panic. Reorganize ffs_copyonwrite() to eliminate a deadlock and also to prevent a race condition that would permit the same block to be copied twice. This change eliminates an unexpected soft updates inconsistency in fsck caused by the double allocation. Use bqrelse rather than brelse for buffers that will be needed soon again by the snapshot code. This improves snapshot performance.
2000-07-24 05:28:33 +00:00
* @(#)ffs_snapshot.c 8.11 (McKusick) 7/23/00
Add snapshots to the fast filesystem. Most of the changes support the gating of system calls that cause modifications to the underlying filesystem. The gating can be enabled by any filesystem that needs to consistently suspend operations by adding the vop_stdgetwritemount to their set of vnops. Once gating is enabled, the function vfs_write_suspend stops all new write operations to a filesystem, allows any filesystem modifying system calls already in progress to complete, then sync's the filesystem to disk and returns. The function vfs_write_resume allows the suspended write operations to begin again. Gating is not added by default for all filesystems as for SMP systems it adds two extra locks to such critical kernel paths as the write system call. Thus, gating should only be added as needed. Details on the use and current status of snapshots in FFS can be found in /sys/ufs/ffs/README.snapshot so for brevity and timelyness is not included here. Unless and until you create a snapshot file, these changes should have no effect on your system (famous last words).
2000-07-11 22:07:57 +00:00
*/
Use __FBSDID().
2003-06-11 06:34:30 +00:00
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
Turn off disk quotas for snapshot files.
2006-05-05 20:10:04 +00:00
#include "opt_quota.h"
Add snapshots to the fast filesystem. Most of the changes support the gating of system calls that cause modifications to the underlying filesystem. The gating can be enabled by any filesystem that needs to consistently suspend operations by adding the vop_stdgetwritemount to their set of vnops. Once gating is enabled, the function vfs_write_suspend stops all new write operations to a filesystem, allows any filesystem modifying system calls already in progress to complete, then sync's the filesystem to disk and returns. The function vfs_write_resume allows the suspended write operations to begin again. Gating is not added by default for all filesystems as for SMP systems it adds two extra locks to such critical kernel paths as the write system call. Thus, gating should only be added as needed. Details on the use and current status of snapshots in FFS can be found in /sys/ufs/ffs/README.snapshot so for brevity and timelyness is not included here. Unless and until you create a snapshot file, these changes should have no effect on your system (famous last words).
2000-07-11 22:07:57 +00:00
#include <sys/param.h>
Change locking so that all snapshots on a particular filesystem share a common lock. This change avoids a deadlock between snapshots when separate requests cause them to deadlock checking each other for a need to copy blocks that are close enough together that they fall into the same indirect block. Although I had anticipated a slowdown from contention for the single lock, my filesystem benchmarks show no measurable change in throughput on a uniprocessor system with three active snapshots. I conjecture that this result is because every copy-on-write fault must check all the active snapshots, so the process was inherently serial already. This change removes the last of the deadlocks of which I am aware in snapshots. Sponsored by: DARPA & NAI Labs.
2002-10-16 00:19:23 +00:00
#include <sys/kernel.h>
Add snapshots to the fast filesystem. Most of the changes support the gating of system calls that cause modifications to the underlying filesystem. The gating can be enabled by any filesystem that needs to consistently suspend operations by adding the vop_stdgetwritemount to their set of vnops. Once gating is enabled, the function vfs_write_suspend stops all new write operations to a filesystem, allows any filesystem modifying system calls already in progress to complete, then sync's the filesystem to disk and returns. The function vfs_write_resume allows the suspended write operations to begin again. Gating is not added by default for all filesystems as for SMP systems it adds two extra locks to such critical kernel paths as the write system call. Thus, gating should only be added as needed. Details on the use and current status of snapshots in FFS can be found in /sys/ufs/ffs/README.snapshot so for brevity and timelyness is not included here. Unless and until you create a snapshot file, these changes should have no effect on your system (famous last words).
2000-07-11 22:07:57 +00:00
#include <sys/systm.h>
Fixes to track snapshot copy-on-write checking in the specinfo structure rather than assuming that the device vnode would reside in the FFS filesystem (which is obviously a broken assumption with the device filesystem).
2001-03-07 07:09:55 +00:00
#include <sys/conf.h>
Add snapshots to the fast filesystem. Most of the changes support the gating of system calls that cause modifications to the underlying filesystem. The gating can be enabled by any filesystem that needs to consistently suspend operations by adding the vop_stdgetwritemount to their set of vnops. Once gating is enabled, the function vfs_write_suspend stops all new write operations to a filesystem, allows any filesystem modifying system calls already in progress to complete, then sync's the filesystem to disk and returns. The function vfs_write_resume allows the suspended write operations to begin again. Gating is not added by default for all filesystems as for SMP systems it adds two extra locks to such critical kernel paths as the write system call. Thus, gating should only be added as needed. Details on the use and current status of snapshots in FFS can be found in /sys/ufs/ffs/README.snapshot so for brevity and timelyness is not included here. Unless and until you create a snapshot file, these changes should have no effect on your system (famous last words).
2000-07-11 22:07:57 +00:00
#include <sys/bio.h>
#include <sys/buf.h>
Add the support for the AT_FDCWD and fd-relative name lookups to the namei(9). Based on the submission by rdivacky, sponsored by Google Summer of Code 2007 Reviewed by: rwatson, rdivacky Tested by: pho
2008-03-31 12:01:21 +00:00
#include <sys/fcntl.h>
Add snapshots to the fast filesystem. Most of the changes support the gating of system calls that cause modifications to the underlying filesystem. The gating can be enabled by any filesystem that needs to consistently suspend operations by adding the vop_stdgetwritemount to their set of vnops. Once gating is enabled, the function vfs_write_suspend stops all new write operations to a filesystem, allows any filesystem modifying system calls already in progress to complete, then sync's the filesystem to disk and returns. The function vfs_write_resume allows the suspended write operations to begin again. Gating is not added by default for all filesystems as for SMP systems it adds two extra locks to such critical kernel paths as the write system call. Thus, gating should only be added as needed. Details on the use and current status of snapshots in FFS can be found in /sys/ufs/ffs/README.snapshot so for brevity and timelyness is not included here. Unless and until you create a snapshot file, these changes should have no effect on your system (famous last words).
2000-07-11 22:07:57 +00:00
#include <sys/proc.h>
#include <sys/namei.h>
- Use the sched_nice() api instead of setting the nice value directly. Tested by: Steve Kargl <sgk@troutmask.apl.washington.edu>
2003-04-12 01:05:19 +00:00
#include <sys/sched.h>
Add snapshots to the fast filesystem. Most of the changes support the gating of system calls that cause modifications to the underlying filesystem. The gating can be enabled by any filesystem that needs to consistently suspend operations by adding the vop_stdgetwritemount to their set of vnops. Once gating is enabled, the function vfs_write_suspend stops all new write operations to a filesystem, allows any filesystem modifying system calls already in progress to complete, then sync's the filesystem to disk and returns. The function vfs_write_resume allows the suspended write operations to begin again. Gating is not added by default for all filesystems as for SMP systems it adds two extra locks to such critical kernel paths as the write system call. Thus, gating should only be added as needed. Details on the use and current status of snapshots in FFS can be found in /sys/ufs/ffs/README.snapshot so for brevity and timelyness is not included here. Unless and until you create a snapshot file, these changes should have no effect on your system (famous last words).
2000-07-11 22:07:57 +00:00
#include <sys/stat.h>
#include <sys/malloc.h>
#include <sys/mount.h>
#include <sys/resource.h>
#include <sys/resourcevar.h>
- Convert the bufobj lock to rwlock. - Use a shared bufobj lock in getblk() and inmem(). - Convert softdep's lk to rwlock to match the bufobj lock. - Move INFREECNT to b_flags and protect it with the buf lock. - Remove unnecessary locking around bremfree() and BKGRDINPROG. Sponsored by: EMC / Isilon Storage Division Discussed with: mckusick, kib, mdf
2013-05-31 00:43:41 +00:00
#include <sys/rwlock.h>
Add snapshots to the fast filesystem. Most of the changes support the gating of system calls that cause modifications to the underlying filesystem. The gating can be enabled by any filesystem that needs to consistently suspend operations by adding the vop_stdgetwritemount to their set of vnops. Once gating is enabled, the function vfs_write_suspend stops all new write operations to a filesystem, allows any filesystem modifying system calls already in progress to complete, then sync's the filesystem to disk and returns. The function vfs_write_resume allows the suspended write operations to begin again. Gating is not added by default for all filesystems as for SMP systems it adds two extra locks to such critical kernel paths as the write system call. Thus, gating should only be added as needed. Details on the use and current status of snapshots in FFS can be found in /sys/ufs/ffs/README.snapshot so for brevity and timelyness is not included here. Unless and until you create a snapshot file, these changes should have no effect on your system (famous last words).
2000-07-11 22:07:57 +00:00
#include <sys/vnode.h>
Move UFS from DEVFS backing to GEOM backing. This eliminates a bunch of vnode overhead (approx 1-2 % speed improvement) and gives us more control over the access to the storage device. Access counts on the underlying device are not correctly tracked and therefore it is possible to read-only mount the same disk device multiple times: syv# mount -p /dev/md0 /var ufs rw 2 2 /dev/ad0 /mnt ufs ro 1 1 /dev/ad0 /mnt2 ufs ro 1 1 /dev/ad0 /mnt3 ufs ro 1 1 Since UFS/FFS is not a synchrousely consistent filesystem (ie: it caches things in RAM) this is not possible with read-write mounts, and the system will correctly reject this. Details: Add a geom consumer and a bufobj pointer to ufsmount. Eliminate the vnode argument from softdep_disk_prewrite(). Pick the vnode out of bp->b_vp for now. Eventually we should find it through bp->b_bufobj->b_private. In the mountcode, use g_vfs_open() once we have used VOP_ACCESS() to check permissions. When upgrading and downgrading between r/o and r/w do the right thing with GEOM access counts. Remove all the workarounds for not being able to do this with VOP_OPEN(). If we are the root mount, drop the exclusive access count until we upgrade to r/w. This allows fsck of the root filesystem and the MNT_RELOAD to work correctly. Set bo_private to the GEOM consumer on the device bufobj. Change the ffs_ops->strategy function to call g_vfs_strategy() In ufs_strategy() directly call the strategy on the disk bufobj. Same in rawread. In ffs_fsync() we will no longer see VCHR device nodes, so remove code which synced the filesystem mounted on it, in case we came there. I'm not sure this code made sense in the first place since we would have taken the specfs route on such a vnode. Redo the highly bogus readblock() function in the snapshot code to something slightly less bogus: Constructing an uio and using physio was really quite a detour. Instead just fill in a bio and ship it down.
2004-10-29 10:15:56 +00:00
#include <geom/geom.h>
Add snapshots to the fast filesystem. Most of the changes support the gating of system calls that cause modifications to the underlying filesystem. The gating can be enabled by any filesystem that needs to consistently suspend operations by adding the vop_stdgetwritemount to their set of vnops. Once gating is enabled, the function vfs_write_suspend stops all new write operations to a filesystem, allows any filesystem modifying system calls already in progress to complete, then sync's the filesystem to disk and returns. The function vfs_write_resume allows the suspended write operations to begin again. Gating is not added by default for all filesystems as for SMP systems it adds two extra locks to such critical kernel paths as the write system call. Thus, gating should only be added as needed. Details on the use and current status of snapshots in FFS can be found in /sys/ufs/ffs/README.snapshot so for brevity and timelyness is not included here. Unless and until you create a snapshot file, these changes should have no effect on your system (famous last words).
2000-07-11 22:07:57 +00:00
#include <ufs/ufs/extattr.h>
#include <ufs/ufs/quota.h>
#include <ufs/ufs/ufsmount.h>
#include <ufs/ufs/inode.h>
#include <ufs/ufs/ufs_extern.h>
#include <ufs/ffs/fs.h>
#include <ufs/ffs/ffs_extern.h>
Use thread0.td_ucred instead of proc0.p_ucred. This change is cosmetic and isn't strictly required. However, it lowers the number of false positives found when grep'ing the kernel sources for p_ucred to ensure proper locking.
2002-02-27 19:18:10 +00:00
#define KERNCRED thread0.td_ucred
Silence a warning.
2000-09-17 19:41:26 +00:00
#define DEBUG 1
Add snapshots to the fast filesystem. Most of the changes support the gating of system calls that cause modifications to the underlying filesystem. The gating can be enabled by any filesystem that needs to consistently suspend operations by adding the vop_stdgetwritemount to their set of vnops. Once gating is enabled, the function vfs_write_suspend stops all new write operations to a filesystem, allows any filesystem modifying system calls already in progress to complete, then sync's the filesystem to disk and returns. The function vfs_write_resume allows the suspended write operations to begin again. Gating is not added by default for all filesystems as for SMP systems it adds two extra locks to such critical kernel paths as the write system call. Thus, gating should only be added as needed. Details on the use and current status of snapshots in FFS can be found in /sys/ufs/ffs/README.snapshot so for brevity and timelyness is not included here. Unless and until you create a snapshot file, these changes should have no effect on your system (famous last words).
2000-07-11 22:07:57 +00:00
New option: NO_FFS_SNAPSHOT. I did this in p4 about the same time that NetBSD implemented it independently of them (don't know which one was actually first). This saves about 24k for those times you don't need snapshot support (like when running off a ram disk, or in an embedded environment where size matters).
2006-01-06 04:44:09 +00:00
#include "opt_ffs.h"
#ifdef NO_FFS_SNAPSHOT
int
ffs_snapshot(mp, snapfile)
struct mount *mp;
char *snapfile;
{
return (EINVAL);
}
int
Ensure that filesystem metadata contained within persistent snapshots is always kept consistent. Suggested by: Jeff Roberson
2011-06-15 23:19:09 +00:00
ffs_snapblkfree(fs, devvp, bno, size, inum, vtype, wkhd)
New option: NO_FFS_SNAPSHOT. I did this in p4 about the same time that NetBSD implemented it independently of them (don't know which one was actually first). This saves about 24k for those times you don't need snapshot support (like when running off a ram disk, or in an embedded environment where size matters).
2006-01-06 04:44:09 +00:00
struct fs *fs;
struct vnode *devvp;
ufs2_daddr_t bno;
long size;
ino_t inum;
Ensure that filesystem metadata contained within persistent snapshots is always kept consistent. Suggested by: Jeff Roberson
2011-06-15 23:19:09 +00:00
enum vtype vtype;
Update to soft updates journaling to properly track freed blocks that get claimed by snapshots. Submitted by: Jeff Roberson Tested by: Peter Holm
2011-06-12 19:27:05 +00:00
struct workhead *wkhd;
New option: NO_FFS_SNAPSHOT. I did this in p4 about the same time that NetBSD implemented it independently of them (don't know which one was actually first). This saves about 24k for those times you don't need snapshot support (like when running off a ram disk, or in an embedded environment where size matters).
2006-01-06 04:44:09 +00:00
{
return (EINVAL);
}
void
ffs_snapremove(vp)
struct vnode *vp;
{
}
void
ffs_snapshot_mount(mp)
struct mount *mp;
{
}
void
ffs_snapshot_unmount(mp)
struct mount *mp;
{
}
void
ffs_snapgone(ip)
struct inode *ip;
{
}
int
ffs_copyonwrite(devvp, bp)
struct vnode *devvp;
struct buf *bp;
{
return (EINVAL);
}
Update to soft updates journaling to properly track freed blocks that get claimed by snapshots. Submitted by: Jeff Roberson Tested by: Peter Holm
2011-06-12 19:27:05 +00:00
void
ffs_sync_snap(mp, waitfor)
struct mount *mp;
int waitfor;
{
}
New option: NO_FFS_SNAPSHOT. I did this in p4 about the same time that NetBSD implemented it independently of them (don't know which one was actually first). This saves about 24k for those times you don't need snapshot support (like when running off a ram disk, or in an embedded environment where size matters).
2006-01-06 04:44:09 +00:00
#else
Add some FEATURE macros for some UFS features. SU+J is not included as a FEATURE macro: - it was not in the tree during the GSoC - I do not see an option to en-/disable it in NOTES Two minor changes where made during the review compared to what was developed during GSoC 2010. No FreeBSD version bump, the userland application to query the features will be committed last and can serve as an indication of the availablility if needed. Sponsored by: Google Summer of Code 2010 Submitted by: kibab Reviewed by: kib X-MFC after: to be determined in last commit with code from this project
2011-02-09 15:33:13 +00:00
FEATURE(ffs_snapshot, "FFS snapshot support");
New option: NO_FFS_SNAPSHOT. I did this in p4 about the same time that NetBSD implemented it independently of them (don't know which one was actually first). This saves about 24k for those times you don't need snapshot support (like when running off a ram disk, or in an embedded environment where size matters).
2006-01-06 04:44:09 +00:00
- Don't free snapdata structures when they are no longer in use. Keeping the lockmgr lock valid allows us to switch the v_lock pointer in snapshot vnodes between the embedded lockmgr lock and snapdata lock without needing the vnode interlock to protect against races - Keep unused snapdata structures in a list. - Add a function to lock the devvp and allocate a snapdata to it or acquire a new one without races. The old function was safe from creation races because we set the mount flag when creating snapshots and thus serializing them. However, it might have been subject to destroying races. Reviewed by: tegge
2008-03-31 07:47:08 +00:00
LIST_HEAD(, snapdata) snapfree;
static struct mtx snapfree_lock;
MTX_SYSINIT(ffs_snapfree, &snapfree_lock, "snapdata free list", MTX_DEF);
Remove __P.
2002-03-19 22:40:48 +00:00
static int cgaccount(int, struct vnode *, struct buf *, int);
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
static int expunge_ufs1(struct vnode *, struct inode *, struct fs *,
int (*)(struct vnode *, ufs1_daddr_t *, ufs1_daddr_t *, struct fs *,
- Merge soft-updates journaling from projects/suj/head into head. This brings in support for an optional intent log which eliminates the need for background fsck on unclean shutdown. Sponsored by: iXsystems, Yahoo!, and Juniper. With help from: McKusick and Peter Holm
2010-04-24 07:05:35 +00:00
ufs_lbn_t, int), int, int);
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
static int indiracct_ufs1(struct vnode *, struct vnode *, int,
ufs1_daddr_t, ufs_lbn_t, ufs_lbn_t, ufs_lbn_t, ufs_lbn_t, struct fs *,
int (*)(struct vnode *, ufs1_daddr_t *, ufs1_daddr_t *, struct fs *,
ufs_lbn_t, int), int);
static int fullacct_ufs1(struct vnode *, ufs1_daddr_t *, ufs1_daddr_t *,
struct fs *, ufs_lbn_t, int);
static int snapacct_ufs1(struct vnode *, ufs1_daddr_t *, ufs1_daddr_t *,
struct fs *, ufs_lbn_t, int);
static int mapacct_ufs1(struct vnode *, ufs1_daddr_t *, ufs1_daddr_t *,
struct fs *, ufs_lbn_t, int);
static int expunge_ufs2(struct vnode *, struct inode *, struct fs *,
int (*)(struct vnode *, ufs2_daddr_t *, ufs2_daddr_t *, struct fs *,
- Merge soft-updates journaling from projects/suj/head into head. This brings in support for an optional intent log which eliminates the need for background fsck on unclean shutdown. Sponsored by: iXsystems, Yahoo!, and Juniper. With help from: McKusick and Peter Holm
2010-04-24 07:05:35 +00:00
ufs_lbn_t, int), int, int);
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
static int indiracct_ufs2(struct vnode *, struct vnode *, int,
ufs2_daddr_t, ufs_lbn_t, ufs_lbn_t, ufs_lbn_t, ufs_lbn_t, struct fs *,
int (*)(struct vnode *, ufs2_daddr_t *, ufs2_daddr_t *, struct fs *,
ufs_lbn_t, int), int);
static int fullacct_ufs2(struct vnode *, ufs2_daddr_t *, ufs2_daddr_t *,
struct fs *, ufs_lbn_t, int);
static int snapacct_ufs2(struct vnode *, ufs2_daddr_t *, ufs2_daddr_t *,
struct fs *, ufs_lbn_t, int);
static int mapacct_ufs2(struct vnode *, ufs2_daddr_t *, ufs2_daddr_t *,
struct fs *, ufs_lbn_t, int);
Create struct snapdata which contains the snapshot fields from cdev and the previously malloc'ed snapshot lock. Malloc struct snapdata instead of just the lock. Replace snapshot fields in cdev with pointer to snapdata (saves 16 bytes). While here, give the private readblock() function a vnode argument in preparation for moving UFS to access GEOM directly.
2004-09-13 07:29:45 +00:00
static int readblock(struct vnode *vp, struct buf *, ufs2_daddr_t);
- Don't free snapdata structures when they are no longer in use. Keeping the lockmgr lock valid allows us to switch the v_lock pointer in snapshot vnodes between the embedded lockmgr lock and snapdata lock without needing the vnode interlock to protect against races - Keep unused snapdata structures in a list. - Add a function to lock the devvp and allocate a snapdata to it or acquire a new one without races. The old function was safe from creation races because we set the mount flag when creating snapshots and thus serializing them. However, it might have been subject to destroying races. Reviewed by: tegge
2008-03-31 07:47:08 +00:00
static void try_free_snapdata(struct vnode *devvp);
static struct snapdata *ffs_snapdata_acquire(struct vnode *devvp);
Cylinder group bitmaps and blocks containing inode for a snapshot file are after snaplock, while other ffs device buffers are before snaplock in global lock order. By itself, this could cause deadlock when bdwrite() tries to flush dirty buffers on snapshotted ffs. If, during the flush, COW activity for snapshot needs to allocate block and ffs_alloccg() selects the cylinder group that is being written by bdwrite(), then kernel would panic due to recursive buffer lock acquision. Avoid dealing with buffers in bdwrite() that are from other side of snaplock divisor in the lock order then the buffer being written. Add new BOP, bop_bdwrite(), to do dirty buffer flushing for same vnode in the bdwrite(). Default implementation, bufbdflush(), refactors the code from bdwrite(). For ffs device buffers, specialized implementation is used. Reviewed by: tegge, jeff, Russell Cattelan (cattelan xfs org, xfs changes) Tested by: Peter Holm X-MFC after: 3 weeks (if ever: it changes ABI)
2007-01-23 10:01:19 +00:00
static int ffs_bp_snapblk(struct vnode *, struct buf *);
Add snapshots to the fast filesystem. Most of the changes support the gating of system calls that cause modifications to the underlying filesystem. The gating can be enabled by any filesystem that needs to consistently suspend operations by adding the vop_stdgetwritemount to their set of vnops. Once gating is enabled, the function vfs_write_suspend stops all new write operations to a filesystem, allows any filesystem modifying system calls already in progress to complete, then sync's the filesystem to disk and returns. The function vfs_write_resume allows the suspended write operations to begin again. Gating is not added by default for all filesystems as for SMP systems it adds two extra locks to such critical kernel paths as the write system call. Thus, gating should only be added as needed. Details on the use and current status of snapshots in FFS can be found in /sys/ufs/ffs/README.snapshot so for brevity and timelyness is not included here. Unless and until you create a snapshot file, these changes should have no effect on your system (famous last words).
2000-07-11 22:07:57 +00:00
Further fixes for deadlock in the presence of multiple snapshots. There are still more to find, but this fix should cover the common cases that folks are hitting.
2001-05-14 17:16:49 +00:00
/*
* To ensure the consistency of snapshots across crashes, we must
* synchronously write out copied blocks before allowing the
* originals to be modified. Because of the rather severe speed
Ensure that filesystem metadata contained within persistent snapshots is always kept consistent. Suggested by: Jeff Roberson
2011-06-15 23:19:09 +00:00
* penalty that this imposes, the code normally only ensures
* persistence for the filesystem metadata contained within a
* snapshot. Setting the following flag allows this crash
* persistence to be enabled for file contents.
Further fixes for deadlock in the presence of multiple snapshots. There are still more to find, but this fix should cover the common cases that folks are hitting.
2001-05-14 17:16:49 +00:00
*/
int dopersistence = 0;
Add snapshots to the fast filesystem. Most of the changes support the gating of system calls that cause modifications to the underlying filesystem. The gating can be enabled by any filesystem that needs to consistently suspend operations by adding the vop_stdgetwritemount to their set of vnops. Once gating is enabled, the function vfs_write_suspend stops all new write operations to a filesystem, allows any filesystem modifying system calls already in progress to complete, then sync's the filesystem to disk and returns. The function vfs_write_resume allows the suspended write operations to begin again. Gating is not added by default for all filesystems as for SMP systems it adds two extra locks to such critical kernel paths as the write system call. Thus, gating should only be added as needed. Details on the use and current status of snapshots in FFS can be found in /sys/ufs/ffs/README.snapshot so for brevity and timelyness is not included here. Unless and until you create a snapshot file, these changes should have no effect on your system (famous last words).
2000-07-11 22:07:57 +00:00
#ifdef DEBUG
#include <sys/sysctl.h>
Further fixes for deadlock in the presence of multiple snapshots. There are still more to find, but this fix should cover the common cases that folks are hitting.
2001-05-14 17:16:49 +00:00
SYSCTL_INT(_debug, OID_AUTO, dopersistence, CTLFLAG_RW, &dopersistence, 0, "");
Fix some easy, global, lint warnings. In most cases, this means making some local variables static. In a couple of cases, this means removing an unused variable.
2003-04-30 12:57:40 +00:00
static int snapdebug = 0;
Add snapshots to the fast filesystem. Most of the changes support the gating of system calls that cause modifications to the underlying filesystem. The gating can be enabled by any filesystem that needs to consistently suspend operations by adding the vop_stdgetwritemount to their set of vnops. Once gating is enabled, the function vfs_write_suspend stops all new write operations to a filesystem, allows any filesystem modifying system calls already in progress to complete, then sync's the filesystem to disk and returns. The function vfs_write_resume allows the suspended write operations to begin again. Gating is not added by default for all filesystems as for SMP systems it adds two extra locks to such critical kernel paths as the write system call. Thus, gating should only be added as needed. Details on the use and current status of snapshots in FFS can be found in /sys/ufs/ffs/README.snapshot so for brevity and timelyness is not included here. Unless and until you create a snapshot file, these changes should have no effect on your system (famous last words).
2000-07-11 22:07:57 +00:00
SYSCTL_INT(_debug, OID_AUTO, snapdebug, CTLFLAG_RW, &snapdebug, 0, "");
Minimize the time necessary to suspend operations on a filesystem when taking a snapshot. The two time consuming operations are scanning all the filesystem bitmaps to determine which blocks are in use and scanning all the other snapshots so as to be able to expunge their blocks from the view of the current snapshot. The bitmap scanning is broken into two passes. Before suspending the filesystem all bitmaps are scanned. After the suspension, those bitmaps that changed after being scanned the first time are rescanned. Typically there are few bitmaps that need to be rescanned. The expunging of other snapshots is now done after the suspension is released by observing that we can easily identify any blocks that were allocated to them after the suspension (they will be maked as `not needing to be copied' in the just created snapshot). For all the gory details, see the ``Running fsck in the Background'' paper in the Usenix BSDCon 2002 Conference Proceedings, pages 55-64.
2001-12-14 00:15:06 +00:00
int collectsnapstats = 0;
SYSCTL_INT(_debug, OID_AUTO, collectsnapstats, CTLFLAG_RW, &collectsnapstats,
0, "");
Add snapshots to the fast filesystem. Most of the changes support the gating of system calls that cause modifications to the underlying filesystem. The gating can be enabled by any filesystem that needs to consistently suspend operations by adding the vop_stdgetwritemount to their set of vnops. Once gating is enabled, the function vfs_write_suspend stops all new write operations to a filesystem, allows any filesystem modifying system calls already in progress to complete, then sync's the filesystem to disk and returns. The function vfs_write_resume allows the suspended write operations to begin again. Gating is not added by default for all filesystems as for SMP systems it adds two extra locks to such critical kernel paths as the write system call. Thus, gating should only be added as needed. Details on the use and current status of snapshots in FFS can be found in /sys/ufs/ffs/README.snapshot so for brevity and timelyness is not included here. Unless and until you create a snapshot file, these changes should have no effect on your system (famous last words).
2000-07-11 22:07:57 +00:00
#endif /* DEBUG */
/*
* Create a snapshot file and initialize it for the filesystem.
*/
int
ffs_snapshot(mp, snapfile)
struct mount *mp;
char *snapfile;
{
This patch fixes a deadlock between the bufdaemon and a process taking a snapshot. As part of taking a snapshot of a filesystem, the kernel builds up a list of the filesystem metadata (such as the cylinder group bitmaps) that are contained in the snapshot. When doing a copy-on-write check, the list is first consulted. If the block being written is found on the list, then the full snapshot lookup can be avoided. Besides providing an important performance speedup this check also avoids a potential deadlock between the code creating the snapshot and the bufdaemon trying to cleanup snapshot related buffers. This fix creates a temporary list containing the key metadata blocks that can cause the deadlock. This temporary list is used between the time that the snapshot is first enabled and the time that the fully complete list is built. Reported by: Attila Nagy <bra@fsn.hu> Sponsored by: DARPA & NAI Labs.
2003-02-22 00:59:34 +00:00
ufs2_daddr_t numblks, blkno, *blkp, *snapblklist;
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
int error, cg, snaploc;
When taking a snapshot, we must check for active files that have been unlinked (e.g., with a zero link count). We have to expunge all trace of these files from the snapshot so that they are neither reclaimed prematurely by fsck nor saved unnecessarily by dump.
2002-02-02 01:42:44 +00:00
int i, size, len, loc;
This change avoids a kernel deadlock on "snaplk" when using snapshots on UFS filesystems running with journaled soft updates. This is the first of several bugs that need to be fixed before removing the restriction added in -r230250 to prevent the use of snapshots on filesystems running with journaled soft updates. The deadlock occurs when holding the snapshot lock (snaplk) and then trying to flush an inode via ffs_update(). We become blocked by another process trying to flush a different inode contained in the same inode block that we need. It holds the inode block for which we are waiting locked. When it tries to write the inode block, it gets blocked waiting for the our snaplk when it calls ffs_copyonwrite() to see if the inode block needs to be copied in our snapshot. The most obvious place that this deadlock arises is in the ffs_copyonwrite() routine when it updates critical metadata in a snapshot and tries to write it out before proceeding. The fix here is to write the data and indirect block pointer for the snapshot, but to skip the call to ffs_update() to write the snapshot inode. To ensure that we will never have to update a pointer in the inode itself, the ffs_snapshot() routine that creates the snapshot has to ensure that all the direct blocks are allocated as part of the creation of the snapshot. A less obvious place that this deadlock occurs is when we hold the snaplk because we are deleting a snapshot. In the course of doing the deletion, we need to allocate various soft update dependency structures and allocate some journal space. If we hit a resource limit while doing this we decrease the resources in use by flushing out an existing dirty file to get it to give up the soft dependency resources that it holds. The flush can cause an ffs_update() to be done on the inode for the file that we have selected to flush resulting in the same deadlock as described above when the inode that we have chosen to flush resides in the same inode block as the snapshot inode that we hold. The fix is to defer cleaning up any time that the inode on which we are operating is a snapshot. Help and review by: Jeff Roberson Tested by: Peter Holm MFC (to 9 only) after: 2 weeks
2012-03-01 18:45:25 +00:00
ufs2_daddr_t blockno;
This update eliminates the system hang reported in kern/160662 when taking a snapshot on a filesystem running with journaled soft updates. Reported by: Hans Ottevanger Fix verified by: Hans Ottevanger PR: kern/160662
2011-09-27 17:34:02 +00:00
uint64_t flag;
Minimize the time necessary to suspend operations on a filesystem when taking a snapshot. The two time consuming operations are scanning all the filesystem bitmaps to determine which blocks are in use and scanning all the other snapshots so as to be able to expunge their blocks from the view of the current snapshot. The bitmap scanning is broken into two passes. Before suspending the filesystem all bitmaps are scanned. After the suspension, those bitmaps that changed after being scanned the first time are rescanned. Typically there are few bitmaps that need to be rescanned. The expunging of other snapshots is now done after the suspension is released by observing that we can easily identify any blocks that were allocated to them after the suspension (they will be maked as `not needing to be copied' in the just created snapshot). For all the gory details, see the ``Running fsck in the Background'' paper in the Usenix BSDCon 2002 Conference Proceedings, pages 55-64.
2001-12-14 00:15:06 +00:00
struct timespec starttime = {0, 0}, endtime;
char saved_nice = 0;
This patch fixes a deadlock between the bufdaemon and a process taking a snapshot. As part of taking a snapshot of a filesystem, the kernel builds up a list of the filesystem metadata (such as the cylinder group bitmaps) that are contained in the snapshot. When doing a copy-on-write check, the list is first consulted. If the block being written is found on the list, then the full snapshot lookup can be avoided. Besides providing an important performance speedup this check also avoids a potential deadlock between the code creating the snapshot and the bufdaemon trying to cleanup snapshot related buffers. This fix creates a temporary list containing the key metadata blocks that can cause the deadlock. This temporary list is used between the time that the snapshot is first enabled and the time that the fully complete list is built. Reported by: Attila Nagy <bra@fsn.hu> Sponsored by: DARPA & NAI Labs.
2003-02-22 00:59:34 +00:00
long redo = 0, snaplistsize = 0;
Refinement to revision 1.16 of ufs/ffs/ffs_snapshot.c to reduce the amount of time that the filesystem must be suspended. The current snapshot is elided as well as the earlier snapshots.
2001-05-04 05:49:28 +00:00
int32_t *lp;
The ffs superblock includes a 128-byte region for use by temporary in-core pointers to summary information. An array in this region (fs_csp) could overflow on filesystems with a very large number of cylinder groups (~16000 on i386 with 8k blocks). When this happens, other fields in the superblock get corrupted, and fsck refuses to check the filesystem. Solve this problem by replacing the fs_csp array in 'struct fs' with a single pointer, and add padding to keep the length of the 128-byte region fixed. Update the kernel and userland utilities to use just this single pointer. With this change, the kernel no longer makes use of the superblock fields 'fs_csshift' and 'fs_csmask'. Add a comment to newfs/mkfs.c to indicate that these fields must be calculated for compatibility with older kernels. Reviewed by: mckusick
2001-01-15 18:30:40 +00:00
void *space;
- Use the ufs lock to protect fs_active. Sponsored By: Isilon Systems, Inc.
2005-01-24 10:10:11 +00:00
struct fs *copy_fs = NULL, *fs;
KSE Milestone 2 Note ALL MODULES MUST BE RECOMPILED make the kernel aware that there are smaller units of scheduling than the process. (but only allow one thread per process at this time). This is functionally equivalent to teh previousl -current except that there is a thread associated with each process. Sorry john! (your next MFC will be a doosie!) Reviewed by: peter@freebsd.org, dillon@freebsd.org X-MFC after: ha ha ha ha
2001-09-12 08:38:13 +00:00
struct thread *td = curthread;
Fixes to track snapshot copy-on-write checking in the specinfo structure rather than assuming that the device vnode would reside in the FFS filesystem (which is obviously a broken assumption with the device filesystem).
2001-03-07 07:09:55 +00:00
struct inode *ip, *xp;
This update eliminates a lock-order reversal warning discovered whle tracking down the system hang reported in kern/160662 and corrected in revision 225806. The LOR is not the cause of the system hang and indeed cannot cause an actual deadlock. However, it can be easily eliminated by defering the acquisition of a buflock until after all the vnode locks have been acquired. Reported by: Hans Ottevanger PR: kern/160662
2011-09-27 17:41:48 +00:00
struct buf *bp, *nbp, *ibp;
Add snapshots to the fast filesystem. Most of the changes support the gating of system calls that cause modifications to the underlying filesystem. The gating can be enabled by any filesystem that needs to consistently suspend operations by adding the vop_stdgetwritemount to their set of vnops. Once gating is enabled, the function vfs_write_suspend stops all new write operations to a filesystem, allows any filesystem modifying system calls already in progress to complete, then sync's the filesystem to disk and returns. The function vfs_write_resume allows the suspended write operations to begin again. Gating is not added by default for all filesystems as for SMP systems it adds two extra locks to such critical kernel paths as the write system call. Thus, gating should only be added as needed. Details on the use and current status of snapshots in FFS can be found in /sys/ufs/ffs/README.snapshot so for brevity and timelyness is not included here. Unless and until you create a snapshot file, these changes should have no effect on your system (famous last words).
2000-07-11 22:07:57 +00:00
struct nameidata nd;
struct mount *wrtmp;
struct vattr vat;
Add marker vnodes to ensure that all vnodes associated with the mount point are iterated over when using MNT_VNODE_FOREACH. Reviewed by: truckman
2006-01-09 20:42:19 +00:00
struct vnode *vp, *xvp, *mvp, *devvp;
When creating a snapshot, create a list of initially allocated blocks. Whenever doing a copy-on-write check, first look in the list of initially allocated blocks to see if it is there. If so, no further check is needed. If not, fall through and do the full check. This change eliminates one of two known deadlocks caused by snapshots. Handling the second deadlock will be the subject of another check-in. This change also reduces the cost of the copy-on-write check by speeding up the verification of frequently checked blocks. Sponsored by: DARPA & NAI Labs.
2002-10-09 06:13:48 +00:00
struct uio auio;
struct iovec aiov;
Create struct snapdata which contains the snapshot fields from cdev and the previously malloc'ed snapshot lock. Malloc struct snapdata instead of just the lock. Replace snapshot fields in cdev with pointer to snapdata (saves 16 bytes). While here, give the private readblock() function a vnode argument in preparation for moving UFS to access GEOM directly.
2004-09-13 07:29:45 +00:00
struct snapdata *sn;
- Use the ufs lock to protect fs_active. Sponsored By: Isilon Systems, Inc.
2005-01-24 10:10:11 +00:00
struct ufsmount *ump;
Create struct snapdata which contains the snapshot fields from cdev and the previously malloc'ed snapshot lock. Malloc struct snapdata instead of just the lock. Replace snapshot fields in cdev with pointer to snapdata (saves 16 bytes). While here, give the private readblock() function a vnode argument in preparation for moving UFS to access GEOM directly.
2004-09-13 07:29:45 +00:00
- Use the ufs lock to protect fs_active. Sponsored By: Isilon Systems, Inc.
2005-01-24 10:10:11 +00:00
ump = VFSTOUFS(mp);
fs = ump->um_fs;
Errors detected while file system is suspended should not trigger an assertion failure.
2006-05-15 22:52:22 +00:00
sn = NULL;
There are several bugs/hangs when trying to take a snapshot on a UFS/FFS filesystem running with journaled soft updates. Until these problems have been tracked down, return ENOTSUPP when an attempt is made to take a snapshot on a filesystem running with journaled soft updates. MFC after: 2 weeks
2012-01-17 01:14:56 +00:00
/*
* At the moment, journaled soft updates cannot support
* taking snapshots.
*/
if (MOUNTEDSUJ(mp)) {
vfs_mount_error(mp, "%s: Snapshots are not yet supported when "
"running with journaled soft updates", fs->fs_fsmnt);
return (EOPNOTSUPP);
}
Use mount interlock to protect all changes to mnt_flag and mnt_kern_flag. This eliminates a race where MNT_UPDATE flag could be lost when nmount() raced against sync(), sync_fsync() or quotactl().
2006-09-26 04:12:49 +00:00
MNT_ILOCK(mp);
flag = mp->mnt_flag;
MNT_IUNLOCK(mp);
Add snapshots to the fast filesystem. Most of the changes support the gating of system calls that cause modifications to the underlying filesystem. The gating can be enabled by any filesystem that needs to consistently suspend operations by adding the vop_stdgetwritemount to their set of vnops. Once gating is enabled, the function vfs_write_suspend stops all new write operations to a filesystem, allows any filesystem modifying system calls already in progress to complete, then sync's the filesystem to disk and returns. The function vfs_write_resume allows the suspended write operations to begin again. Gating is not added by default for all filesystems as for SMP systems it adds two extra locks to such critical kernel paths as the write system call. Thus, gating should only be added as needed. Details on the use and current status of snapshots in FFS can be found in /sys/ufs/ffs/README.snapshot so for brevity and timelyness is not included here. Unless and until you create a snapshot file, these changes should have no effect on your system (famous last words).
2000-07-11 22:07:57 +00:00
/*
* Need to serialize access to snapshot code per filesystem.
*/
/*
* Assign a snapshot slot in the superblock.
*/
- Use the ufs lock to protect fs_active. Sponsored By: Isilon Systems, Inc.
2005-01-24 10:10:11 +00:00
UFS_LOCK(ump);
Add snapshots to the fast filesystem. Most of the changes support the gating of system calls that cause modifications to the underlying filesystem. The gating can be enabled by any filesystem that needs to consistently suspend operations by adding the vop_stdgetwritemount to their set of vnops. Once gating is enabled, the function vfs_write_suspend stops all new write operations to a filesystem, allows any filesystem modifying system calls already in progress to complete, then sync's the filesystem to disk and returns. The function vfs_write_resume allows the suspended write operations to begin again. Gating is not added by default for all filesystems as for SMP systems it adds two extra locks to such critical kernel paths as the write system call. Thus, gating should only be added as needed. Details on the use and current status of snapshots in FFS can be found in /sys/ufs/ffs/README.snapshot so for brevity and timelyness is not included here. Unless and until you create a snapshot file, these changes should have no effect on your system (famous last words).
2000-07-11 22:07:57 +00:00
for (snaploc = 0; snaploc < FSMAXSNAP; snaploc++)
if (fs->fs_snapinum[snaploc] == 0)
break;
- Use the ufs lock to protect fs_active. Sponsored By: Isilon Systems, Inc.
2005-01-24 10:10:11 +00:00
UFS_UNLOCK(ump);
Add snapshots to the fast filesystem. Most of the changes support the gating of system calls that cause modifications to the underlying filesystem. The gating can be enabled by any filesystem that needs to consistently suspend operations by adding the vop_stdgetwritemount to their set of vnops. Once gating is enabled, the function vfs_write_suspend stops all new write operations to a filesystem, allows any filesystem modifying system calls already in progress to complete, then sync's the filesystem to disk and returns. The function vfs_write_resume allows the suspended write operations to begin again. Gating is not added by default for all filesystems as for SMP systems it adds two extra locks to such critical kernel paths as the write system call. Thus, gating should only be added as needed. Details on the use and current status of snapshots in FFS can be found in /sys/ufs/ffs/README.snapshot so for brevity and timelyness is not included here. Unless and until you create a snapshot file, these changes should have no effect on your system (famous last words).
2000-07-11 22:07:57 +00:00
if (snaploc == FSMAXSNAP)
return (ENOSPC);
/*
* Create the snapshot file.
*/
restart:
The VOP_LOOKUP() implementations for CREATE op do not put the name into namecache, to avoid cache trashing when doing large operations. E.g., tar archive extraction is not usually followed by access to many of the files created. Right now, each VOP_LOOKUP() implementation explicitely knowns about this quirk and tests for both MAKEENTRY flag presence and op != CREATE to make the call to cache_enter(). Centralize the handling of the quirk into VFS, by deciding to cache only by MAKEENTRY flag in VOP. VFS now sets NOCACHE flag for CREATE namei() calls. Note that the change in semantic is backward-compatible and could be merged to the stable branch, and is compatible with non-changed third-party filesystems which correctly handle MAKEENTRY. Suggested by: Chris Torek <torek@pi-coral.com> Reviewed by: mckusick Tested by: pho Sponsored by: The FreeBSD Foundation MFC after: 2 weeks
2014-12-18 10:01:12 +00:00
NDINIT(&nd, CREATE, LOCKPARENT | LOCKLEAF | NOCACHE, UIO_SYSSPACE,
snapfile, td);
Add snapshots to the fast filesystem. Most of the changes support the gating of system calls that cause modifications to the underlying filesystem. The gating can be enabled by any filesystem that needs to consistently suspend operations by adding the vop_stdgetwritemount to their set of vnops. Once gating is enabled, the function vfs_write_suspend stops all new write operations to a filesystem, allows any filesystem modifying system calls already in progress to complete, then sync's the filesystem to disk and returns. The function vfs_write_resume allows the suspended write operations to begin again. Gating is not added by default for all filesystems as for SMP systems it adds two extra locks to such critical kernel paths as the write system call. Thus, gating should only be added as needed. Details on the use and current status of snapshots in FFS can be found in /sys/ufs/ffs/README.snapshot so for brevity and timelyness is not included here. Unless and until you create a snapshot file, these changes should have no effect on your system (famous last words).
2000-07-11 22:07:57 +00:00
if ((error = namei(&nd)) != 0)
return (error);
if (nd.ni_vp != NULL) {
vput(nd.ni_vp);
error = EEXIST;
}
if (nd.ni_dvp->v_mount != mp)
error = EXDEV;
if (error) {
NDFREE(&nd, NDF_ONLY_PNBUF);
if (nd.ni_dvp == nd.ni_vp)
vrele(nd.ni_dvp);
else
vput(nd.ni_dvp);
return (error);
}
VATTR_NULL(&vat);
vat.va_type = VREG;
vat.va_mode = S_IRUSR;
vat.va_vaflags |= VA_EXCLUSIVE;
if (VOP_GETWRITEMOUNT(nd.ni_dvp, &wrtmp))
wrtmp = NULL;
if (wrtmp != mp)
panic("ffs_snapshot: mount mismatch");
- Release the references acquired by VOP_GETWRITEMOUNT and vfs_getvfs(). Discussed with: tegge Tested by: kris Sponsored by: Isilon Systems, Inc.
2006-03-31 03:54:20 +00:00
vfs_rel(wrtmp);
Brain fault, forgot to update ffs_snapshot.c with the new calling convention for vn_start_write.
2000-07-12 00:27:27 +00:00
if (vn_start_write(NULL, &wrtmp, V_NOWAIT) != 0) {
Add snapshots to the fast filesystem. Most of the changes support the gating of system calls that cause modifications to the underlying filesystem. The gating can be enabled by any filesystem that needs to consistently suspend operations by adding the vop_stdgetwritemount to their set of vnops. Once gating is enabled, the function vfs_write_suspend stops all new write operations to a filesystem, allows any filesystem modifying system calls already in progress to complete, then sync's the filesystem to disk and returns. The function vfs_write_resume allows the suspended write operations to begin again. Gating is not added by default for all filesystems as for SMP systems it adds two extra locks to such critical kernel paths as the write system call. Thus, gating should only be added as needed. Details on the use and current status of snapshots in FFS can be found in /sys/ufs/ffs/README.snapshot so for brevity and timelyness is not included here. Unless and until you create a snapshot file, these changes should have no effect on your system (famous last words).
2000-07-11 22:07:57 +00:00
NDFREE(&nd, NDF_ONLY_PNBUF);
vput(nd.ni_dvp);
Brain fault, forgot to update ffs_snapshot.c with the new calling convention for vn_start_write.
2000-07-12 00:27:27 +00:00
if ((error = vn_start_write(NULL, &wrtmp,
V_XSLEEP | PCATCH)) != 0)
Add snapshots to the fast filesystem. Most of the changes support the gating of system calls that cause modifications to the underlying filesystem. The gating can be enabled by any filesystem that needs to consistently suspend operations by adding the vop_stdgetwritemount to their set of vnops. Once gating is enabled, the function vfs_write_suspend stops all new write operations to a filesystem, allows any filesystem modifying system calls already in progress to complete, then sync's the filesystem to disk and returns. The function vfs_write_resume allows the suspended write operations to begin again. Gating is not added by default for all filesystems as for SMP systems it adds two extra locks to such critical kernel paths as the write system call. Thus, gating should only be added as needed. Details on the use and current status of snapshots in FFS can be found in /sys/ufs/ffs/README.snapshot so for brevity and timelyness is not included here. Unless and until you create a snapshot file, these changes should have no effect on your system (famous last words).
2000-07-11 22:07:57 +00:00
return (error);
goto restart;
}
error = VOP_CREATE(nd.ni_dvp, &nd.ni_vp, &nd.ni_cnd, &vat);
VOP_LOCK1() (and so VOP_LOCK()) and VOP_UNLOCK() are only used in conjuction with 'thread' argument passing which is always curthread. Remove the unuseful extra-argument and pass explicitly curthread to lower layer functions, when necessary. KPI results broken by this change, which should affect several ports, so version bumping and manpage update will be further committed. Tested by: kris, pho, Diego Sardina <siarodx at gmail dot com>
2008-01-13 14:44:15 +00:00
VOP_UNLOCK(nd.ni_dvp, 0);
Add snapshots to the fast filesystem. Most of the changes support the gating of system calls that cause modifications to the underlying filesystem. The gating can be enabled by any filesystem that needs to consistently suspend operations by adding the vop_stdgetwritemount to their set of vnops. Once gating is enabled, the function vfs_write_suspend stops all new write operations to a filesystem, allows any filesystem modifying system calls already in progress to complete, then sync's the filesystem to disk and returns. The function vfs_write_resume allows the suspended write operations to begin again. Gating is not added by default for all filesystems as for SMP systems it adds two extra locks to such critical kernel paths as the write system call. Thus, gating should only be added as needed. Details on the use and current status of snapshots in FFS can be found in /sys/ufs/ffs/README.snapshot so for brevity and timelyness is not included here. Unless and until you create a snapshot file, these changes should have no effect on your system (famous last words).
2000-07-11 22:07:57 +00:00
if (error) {
NDFREE(&nd, NDF_ONLY_PNBUF);
vn_finished_write(wrtmp);
Ensure that vnode for directory isn't reclaimed before ffs_snapshot() has completed expunging unlinked files. It could come back at another memory location causing a lock order reversal.
2006-03-19 21:05:10 +00:00
vrele(nd.ni_dvp);
Add snapshots to the fast filesystem. Most of the changes support the gating of system calls that cause modifications to the underlying filesystem. The gating can be enabled by any filesystem that needs to consistently suspend operations by adding the vop_stdgetwritemount to their set of vnops. Once gating is enabled, the function vfs_write_suspend stops all new write operations to a filesystem, allows any filesystem modifying system calls already in progress to complete, then sync's the filesystem to disk and returns. The function vfs_write_resume allows the suspended write operations to begin again. Gating is not added by default for all filesystems as for SMP systems it adds two extra locks to such critical kernel paths as the write system call. Thus, gating should only be added as needed. Details on the use and current status of snapshots in FFS can be found in /sys/ufs/ffs/README.snapshot so for brevity and timelyness is not included here. Unless and until you create a snapshot file, these changes should have no effect on your system (famous last words).
2000-07-11 22:07:57 +00:00
return (error);
}
vp = nd.ni_vp;
Quota system cleanup. 1) Do not do quota accounting for the actual quota data files or for file system snapshot files ("system" files). This prevents a deadlock descibed in PR kern/30958 if the kernel ever has to grow the quota file. Snapshot files were already exempt from the quota checks, but this change generalized the check. 2) Fix a cast that caused extremely large uids/gids to incorrectly write the quota information to the data file at a truncated value for a uint_t32 id value. The incorrect cast caused quota files in this case to be around 4GB in size, with the correct cast they can now be 131GB in size. Also related to PR kern/30958. 3) Check for what appear to be negative UIDs/GIDs and not account for them. This prevents the quota files from becoming 131GB in size and causing quotacheck to run forever at bootup. This could also cause the kernel to try and expand the quota file, which might deadlock due to the issue in #1. kern/30958 and kern/38156 (and some much older closed PR's). 4) With the deadlock problems gone, the kernel can now expand the size of the quota database files if it needs to. 5) Pass in the i-node count change value to chkiq and chkiqchg as an int, like it used to be before the common routine was split up into 2 different routines to increase / decrease the i-node in-use count. Prevents an underflow on the i-node count. Related to PR kern/89247. 6) Prevent the block usage from growing slowly if a file system is full and the write was denied due to that fact. PR kern/89247. Some of these changes require an updated quotacheck to prevent the creation of huge (131GB) quota data files (item #3). #1/#4 probably fixes a lot of the random hangs when quotas are enabled, possibly some of the jail hangs.
2007-01-20 11:58:32 +00:00
vp->v_vflag |= VV_SYSTEM;
Add snapshots to the fast filesystem. Most of the changes support the gating of system calls that cause modifications to the underlying filesystem. The gating can be enabled by any filesystem that needs to consistently suspend operations by adding the vop_stdgetwritemount to their set of vnops. Once gating is enabled, the function vfs_write_suspend stops all new write operations to a filesystem, allows any filesystem modifying system calls already in progress to complete, then sync's the filesystem to disk and returns. The function vfs_write_resume allows the suspended write operations to begin again. Gating is not added by default for all filesystems as for SMP systems it adds two extra locks to such critical kernel paths as the write system call. Thus, gating should only be added as needed. Details on the use and current status of snapshots in FFS can be found in /sys/ufs/ffs/README.snapshot so for brevity and timelyness is not included here. Unless and until you create a snapshot file, these changes should have no effect on your system (famous last words).
2000-07-11 22:07:57 +00:00
ip = VTOI(vp);
Remove a race condition / deadlock from snapshots. When converting from individual vnode locks to the snapshot lock, be sure to pass any waiting processes along to the new lock as well. This transfer is done by a new function in the lock manager, transferlockers(from_lock, to_lock); Thanks to Lamont Granquist <lamont@scriptkiddie.org> for his help in pounding on snapshots beyond all reason and finding this deadlock. Sponsored by: DARPA & NAI Labs.
2002-11-30 19:00:51 +00:00
devvp = ip->i_devvp;
Add snapshots to the fast filesystem. Most of the changes support the gating of system calls that cause modifications to the underlying filesystem. The gating can be enabled by any filesystem that needs to consistently suspend operations by adding the vop_stdgetwritemount to their set of vnops. Once gating is enabled, the function vfs_write_suspend stops all new write operations to a filesystem, allows any filesystem modifying system calls already in progress to complete, then sync's the filesystem to disk and returns. The function vfs_write_resume allows the suspended write operations to begin again. Gating is not added by default for all filesystems as for SMP systems it adds two extra locks to such critical kernel paths as the write system call. Thus, gating should only be added as needed. Details on the use and current status of snapshots in FFS can be found in /sys/ufs/ffs/README.snapshot so for brevity and timelyness is not included here. Unless and until you create a snapshot file, these changes should have no effect on your system (famous last words).
2000-07-11 22:07:57 +00:00
/*
* Allocate and copy the last block contents so as to be able
* to set size to that of the filesystem.
*/
numblks = howmany(fs->fs_size, fs->fs_frag);
VOP_BALLOC was never really a VOP in the first place, so convert it to UFS_BALLOC like the other "between UFS and FFS function interfaces".
2001-04-29 12:36:52 +00:00
error = UFS_BALLOC(vp, lblktosize(fs, (off_t)(numblks - 1)),
Rename the BALLOC flags from B_* to BA_* to avoid confusion with the struct buf B_ flags. Approved by: mckusick
2002-06-23 06:12:22 +00:00
fs->fs_bsize, KERNCRED, BA_CLRBUF, &bp);
Add snapshots to the fast filesystem. Most of the changes support the gating of system calls that cause modifications to the underlying filesystem. The gating can be enabled by any filesystem that needs to consistently suspend operations by adding the vop_stdgetwritemount to their set of vnops. Once gating is enabled, the function vfs_write_suspend stops all new write operations to a filesystem, allows any filesystem modifying system calls already in progress to complete, then sync's the filesystem to disk and returns. The function vfs_write_resume allows the suspended write operations to begin again. Gating is not added by default for all filesystems as for SMP systems it adds two extra locks to such critical kernel paths as the write system call. Thus, gating should only be added as needed. Details on the use and current status of snapshots in FFS can be found in /sys/ufs/ffs/README.snapshot so for brevity and timelyness is not included here. Unless and until you create a snapshot file, these changes should have no effect on your system (famous last words).
2000-07-11 22:07:57 +00:00
if (error)
goto out;
ip->i_size = lblktosize(fs, (off_t)numblks);
Avoid using casts as lvalues. Introduce DIP_SET macro which sets proper inode field based on UFS version. Use DIP ro read values and DIP_SET to modify them throughout FFS code base.
2004-07-28 06:41:27 +00:00
DIP_SET(ip, i_size, ip->i_size);
Add snapshots to the fast filesystem. Most of the changes support the gating of system calls that cause modifications to the underlying filesystem. The gating can be enabled by any filesystem that needs to consistently suspend operations by adding the vop_stdgetwritemount to their set of vnops. Once gating is enabled, the function vfs_write_suspend stops all new write operations to a filesystem, allows any filesystem modifying system calls already in progress to complete, then sync's the filesystem to disk and returns. The function vfs_write_resume allows the suspended write operations to begin again. Gating is not added by default for all filesystems as for SMP systems it adds two extra locks to such critical kernel paths as the write system call. Thus, gating should only be added as needed. Details on the use and current status of snapshots in FFS can be found in /sys/ufs/ffs/README.snapshot so for brevity and timelyness is not included here. Unless and until you create a snapshot file, these changes should have no effect on your system (famous last words).
2000-07-11 22:07:57 +00:00
ip->i_flag |= IN_CHANGE | IN_UPDATE;
Don't leak a locked buffer if last block on file system cannot be read.
2006-05-15 22:59:23 +00:00
error = readblock(vp, bp, numblks - 1);
Add snapshots to the fast filesystem. Most of the changes support the gating of system calls that cause modifications to the underlying filesystem. The gating can be enabled by any filesystem that needs to consistently suspend operations by adding the vop_stdgetwritemount to their set of vnops. Once gating is enabled, the function vfs_write_suspend stops all new write operations to a filesystem, allows any filesystem modifying system calls already in progress to complete, then sync's the filesystem to disk and returns. The function vfs_write_resume allows the suspended write operations to begin again. Gating is not added by default for all filesystems as for SMP systems it adds two extra locks to such critical kernel paths as the write system call. Thus, gating should only be added as needed. Details on the use and current status of snapshots in FFS can be found in /sys/ufs/ffs/README.snapshot so for brevity and timelyness is not included here. Unless and until you create a snapshot file, these changes should have no effect on your system (famous last words).
2000-07-11 22:07:57 +00:00
bawrite(bp);
Don't leak a locked buffer if last block on file system cannot be read.
2006-05-15 22:59:23 +00:00
if (error != 0)
goto out;
Add snapshots to the fast filesystem. Most of the changes support the gating of system calls that cause modifications to the underlying filesystem. The gating can be enabled by any filesystem that needs to consistently suspend operations by adding the vop_stdgetwritemount to their set of vnops. Once gating is enabled, the function vfs_write_suspend stops all new write operations to a filesystem, allows any filesystem modifying system calls already in progress to complete, then sync's the filesystem to disk and returns. The function vfs_write_resume allows the suspended write operations to begin again. Gating is not added by default for all filesystems as for SMP systems it adds two extra locks to such critical kernel paths as the write system call. Thus, gating should only be added as needed. Details on the use and current status of snapshots in FFS can be found in /sys/ufs/ffs/README.snapshot so for brevity and timelyness is not included here. Unless and until you create a snapshot file, these changes should have no effect on your system (famous last words).
2000-07-11 22:07:57 +00:00
/*
* Preallocate critical data structures so that we can copy
* them in without further allocation after we suspend all
* operations on the filesystem. We would like to just release
* the allocated buffers without writing them since they will
* be filled in below once we are ready to go, but this upsets
* the soft update code, so we go ahead and write the new buffers.
*
Rather than copying all the indirect blocks of the snapshot, simply mark them as BLK_NOCOPY. This trick cuts the initial size of the snapshot in half and cuts the time to take a snapshot by a third.
2001-04-26 00:50:53 +00:00
* Allocate all indirect blocks and mark all of them as not
* needing to be copied.
Add snapshots to the fast filesystem. Most of the changes support the gating of system calls that cause modifications to the underlying filesystem. The gating can be enabled by any filesystem that needs to consistently suspend operations by adding the vop_stdgetwritemount to their set of vnops. Once gating is enabled, the function vfs_write_suspend stops all new write operations to a filesystem, allows any filesystem modifying system calls already in progress to complete, then sync's the filesystem to disk and returns. The function vfs_write_resume allows the suspended write operations to begin again. Gating is not added by default for all filesystems as for SMP systems it adds two extra locks to such critical kernel paths as the write system call. Thus, gating should only be added as needed. Details on the use and current status of snapshots in FFS can be found in /sys/ufs/ffs/README.snapshot so for brevity and timelyness is not included here. Unless and until you create a snapshot file, these changes should have no effect on your system (famous last words).
2000-07-11 22:07:57 +00:00
*/
for (blkno = NDADDR; blkno < numblks; blkno += NINDIR(fs)) {
VOP_BALLOC was never really a VOP in the first place, so convert it to UFS_BALLOC like the other "between UFS and FFS function interfaces".
2001-04-29 12:36:52 +00:00
error = UFS_BALLOC(vp, lblktosize(fs, (off_t)blkno),
Rename the BALLOC flags from B_* to BA_* to avoid confusion with the struct buf B_ flags. Approved by: mckusick
2002-06-23 06:12:22 +00:00
fs->fs_bsize, td->td_ucred, BA_METAONLY, &ibp);
Add snapshots to the fast filesystem. Most of the changes support the gating of system calls that cause modifications to the underlying filesystem. The gating can be enabled by any filesystem that needs to consistently suspend operations by adding the vop_stdgetwritemount to their set of vnops. Once gating is enabled, the function vfs_write_suspend stops all new write operations to a filesystem, allows any filesystem modifying system calls already in progress to complete, then sync's the filesystem to disk and returns. The function vfs_write_resume allows the suspended write operations to begin again. Gating is not added by default for all filesystems as for SMP systems it adds two extra locks to such critical kernel paths as the write system call. Thus, gating should only be added as needed. Details on the use and current status of snapshots in FFS can be found in /sys/ufs/ffs/README.snapshot so for brevity and timelyness is not included here. Unless and until you create a snapshot file, these changes should have no effect on your system (famous last words).
2000-07-11 22:07:57 +00:00
if (error)
goto out;
Fix two deadlocks in snapshots: 1) Release the snapshot file lock while suspending the system. Otherwise a process trying to read the lock may block on its containing directory preventing the suspension from completing. Thanks to Sean Kelly <smkelly@zombie.org> for finding this deadlock. 2) Replace some bdwrite's with bawrite's so as not to fill all the buffers with dirty data. The buffers could not be cleaned as the snapshot vnode was locked hence the system could deadlock when making snapshots of really massive filesystems. Thanks to Hidetoshi Shimokawa <simokawa@sat.t.u-tokyo.ac.jp> for figuring this out. Sponsored by: DARPA & NAI Labs.
2002-11-30 07:27:12 +00:00
bawrite(ibp);
Add snapshots to the fast filesystem. Most of the changes support the gating of system calls that cause modifications to the underlying filesystem. The gating can be enabled by any filesystem that needs to consistently suspend operations by adding the vop_stdgetwritemount to their set of vnops. Once gating is enabled, the function vfs_write_suspend stops all new write operations to a filesystem, allows any filesystem modifying system calls already in progress to complete, then sync's the filesystem to disk and returns. The function vfs_write_resume allows the suspended write operations to begin again. Gating is not added by default for all filesystems as for SMP systems it adds two extra locks to such critical kernel paths as the write system call. Thus, gating should only be added as needed. Details on the use and current status of snapshots in FFS can be found in /sys/ufs/ffs/README.snapshot so for brevity and timelyness is not included here. Unless and until you create a snapshot file, these changes should have no effect on your system (famous last words).
2000-07-11 22:07:57 +00:00
}
/*
* Allocate copies for the superblock and its summary information.
*/
Create a new 32-bit fs_flags word in the superblock. Add code to move the old 8-bit fs_old_flags to the new location the first time that the filesystem is mounted by a new kernel. One of the unused flags in fs_old_flags is used to indicate that the flags have been moved. Leave the fs_old_flags word intact so that it will work properly if used on an old kernel. Change the fs_sblockloc superblock location field to be in units of bytes instead of in units of filesystem fragments. The old units did not work properly when the fragment size exceeeded the superblock size (8192). Update old fs_sblockloc values at the same time that the flags are moved. Suggested by: BOUWSMA Barry <freebsd-misuser@netscum.dyndns.dk> Sponsored by: DARPA & NAI Labs.
2002-11-27 02:18:58 +00:00
error = UFS_BALLOC(vp, fs->fs_sblockloc, fs->fs_sbsize, KERNCRED,
0, &nbp);
Refinement to revision 1.16 of ufs/ffs/ffs_snapshot.c to reduce the amount of time that the filesystem must be suspended. The current snapshot is elided as well as the earlier snapshots.
2001-05-04 05:49:28 +00:00
if (error)
Add snapshots to the fast filesystem. Most of the changes support the gating of system calls that cause modifications to the underlying filesystem. The gating can be enabled by any filesystem that needs to consistently suspend operations by adding the vop_stdgetwritemount to their set of vnops. Once gating is enabled, the function vfs_write_suspend stops all new write operations to a filesystem, allows any filesystem modifying system calls already in progress to complete, then sync's the filesystem to disk and returns. The function vfs_write_resume allows the suspended write operations to begin again. Gating is not added by default for all filesystems as for SMP systems it adds two extra locks to such critical kernel paths as the write system call. Thus, gating should only be added as needed. Details on the use and current status of snapshots in FFS can be found in /sys/ufs/ffs/README.snapshot so for brevity and timelyness is not included here. Unless and until you create a snapshot file, these changes should have no effect on your system (famous last words).
2000-07-11 22:07:57 +00:00
goto out;
bawrite(nbp);
blkno = fragstoblks(fs, fs->fs_csaddr);
len = howmany(fs->fs_cssize, fs->fs_bsize);
for (loc = 0; loc < len; loc++) {
VOP_BALLOC was never really a VOP in the first place, so convert it to UFS_BALLOC like the other "between UFS and FFS function interfaces".
2001-04-29 12:36:52 +00:00
error = UFS_BALLOC(vp, lblktosize(fs, (off_t)(blkno + loc)),
Add snapshots to the fast filesystem. Most of the changes support the gating of system calls that cause modifications to the underlying filesystem. The gating can be enabled by any filesystem that needs to consistently suspend operations by adding the vop_stdgetwritemount to their set of vnops. Once gating is enabled, the function vfs_write_suspend stops all new write operations to a filesystem, allows any filesystem modifying system calls already in progress to complete, then sync's the filesystem to disk and returns. The function vfs_write_resume allows the suspended write operations to begin again. Gating is not added by default for all filesystems as for SMP systems it adds two extra locks to such critical kernel paths as the write system call. Thus, gating should only be added as needed. Details on the use and current status of snapshots in FFS can be found in /sys/ufs/ffs/README.snapshot so for brevity and timelyness is not included here. Unless and until you create a snapshot file, these changes should have no effect on your system (famous last words).
2000-07-11 22:07:57 +00:00
fs->fs_bsize, KERNCRED, 0, &nbp);
if (error)
goto out;
bawrite(nbp);
}
Minimize the time necessary to suspend operations on a filesystem when taking a snapshot. The two time consuming operations are scanning all the filesystem bitmaps to determine which blocks are in use and scanning all the other snapshots so as to be able to expunge their blocks from the view of the current snapshot. The bitmap scanning is broken into two passes. Before suspending the filesystem all bitmaps are scanned. After the suspension, those bitmaps that changed after being scanned the first time are rescanned. Typically there are few bitmaps that need to be rescanned. The expunging of other snapshots is now done after the suspension is released by observing that we can easily identify any blocks that were allocated to them after the suspension (they will be maked as `not needing to be copied' in the just created snapshot). For all the gory details, see the ``Running fsck in the Background'' paper in the Usenix BSDCon 2002 Conference Proceedings, pages 55-64.
2001-12-14 00:15:06 +00:00
/*
* Allocate all cylinder group blocks.
*/
for (cg = 0; cg < fs->fs_ncg; cg++) {
This patch fixes a bug in the logical block calculation macros so that they convert to 64-bit values before shifting rather than afterwards. Once fixed, they can be used rather than inline expanded. Sponsored by: DARPA & NAI Labs.
2003-02-22 00:19:26 +00:00
error = UFS_BALLOC(vp, lfragtosize(fs, cgtod(fs, cg)),
Minimize the time necessary to suspend operations on a filesystem when taking a snapshot. The two time consuming operations are scanning all the filesystem bitmaps to determine which blocks are in use and scanning all the other snapshots so as to be able to expunge their blocks from the view of the current snapshot. The bitmap scanning is broken into two passes. Before suspending the filesystem all bitmaps are scanned. After the suspension, those bitmaps that changed after being scanned the first time are rescanned. Typically there are few bitmaps that need to be rescanned. The expunging of other snapshots is now done after the suspension is released by observing that we can easily identify any blocks that were allocated to them after the suspension (they will be maked as `not needing to be copied' in the just created snapshot). For all the gory details, see the ``Running fsck in the Background'' paper in the Usenix BSDCon 2002 Conference Proceedings, pages 55-64.
2001-12-14 00:15:06 +00:00
fs->fs_bsize, KERNCRED, 0, &nbp);
if (error)
goto out;
Fix two deadlocks in snapshots: 1) Release the snapshot file lock while suspending the system. Otherwise a process trying to read the lock may block on its containing directory preventing the suspension from completing. Thanks to Sean Kelly <smkelly@zombie.org> for finding this deadlock. 2) Replace some bdwrite's with bawrite's so as not to fill all the buffers with dirty data. The buffers could not be cleaned as the snapshot vnode was locked hence the system could deadlock when making snapshots of really massive filesystems. Thanks to Hidetoshi Shimokawa <simokawa@sat.t.u-tokyo.ac.jp> for figuring this out. Sponsored by: DARPA & NAI Labs.
2002-11-30 07:27:12 +00:00
bawrite(nbp);
For now on every 10 cyclinder groups flush the buffer cache to free up space. If the buffer cache fills up then the disk systems can grind to a halt. Better tuning can be figured out later. Tested by: Tim, others and work Reviewed by: Kostik Belousov PR: 128832
2008-11-13 17:40:21 +00:00
if (cg % 10 == 0)
Add a third flags argument to ffs_syncvnode to avoid a possible conflict with MNT_WAIT flags that passed in its second argument. This will be MFC'ed together with r232351. Discussed with: kib
2012-03-25 00:02:37 +00:00
ffs_syncvnode(vp, MNT_WAIT, 0);
Minimize the time necessary to suspend operations on a filesystem when taking a snapshot. The two time consuming operations are scanning all the filesystem bitmaps to determine which blocks are in use and scanning all the other snapshots so as to be able to expunge their blocks from the view of the current snapshot. The bitmap scanning is broken into two passes. Before suspending the filesystem all bitmaps are scanned. After the suspension, those bitmaps that changed after being scanned the first time are rescanned. Typically there are few bitmaps that need to be rescanned. The expunging of other snapshots is now done after the suspension is released by observing that we can easily identify any blocks that were allocated to them after the suspension (they will be maked as `not needing to be copied' in the just created snapshot). For all the gory details, see the ``Running fsck in the Background'' paper in the Usenix BSDCon 2002 Conference Proceedings, pages 55-64.
2001-12-14 00:15:06 +00:00
}
/*
* Copy all the cylinder group maps. Although the
* filesystem is still active, we hope that only a few
* cylinder groups will change between now and when we
* suspend operations. Thus, we will be able to quickly
* touch up the few cylinder groups that changed during
* the suspension period.
*/
Fix a bug introduced in ffs_snapshot.c -r1.25 and fs.h -r1.26 which caused incomplete snapshots to be taken. When background fsck would run on these snapshots, the result would be files being incorrectly released which would subsequently panic the kernel with ``handle_workitem_freefile: inodedep survived'', ``handle_written_inodeblock: live inodedep'', and ``handle_workitem_remove: lost inodedep'' errors.
2002-01-17 08:33:32 +00:00
len = howmany(fs->fs_ncg, NBBY);
Retire the MALLOC and FREE macros. They are an abomination unto style(9). MFC after: 3 months
2008-10-23 15:53:51 +00:00
space = malloc(len, M_DEVBUF, M_WAITOK|M_ZERO);
- Use the ufs lock to protect fs_active. Sponsored By: Isilon Systems, Inc.
2005-01-24 10:10:11 +00:00
UFS_LOCK(ump);
fs->fs_active = space;
UFS_UNLOCK(ump);
Minimize the time necessary to suspend operations on a filesystem when taking a snapshot. The two time consuming operations are scanning all the filesystem bitmaps to determine which blocks are in use and scanning all the other snapshots so as to be able to expunge their blocks from the view of the current snapshot. The bitmap scanning is broken into two passes. Before suspending the filesystem all bitmaps are scanned. After the suspension, those bitmaps that changed after being scanned the first time are rescanned. Typically there are few bitmaps that need to be rescanned. The expunging of other snapshots is now done after the suspension is released by observing that we can easily identify any blocks that were allocated to them after the suspension (they will be maked as `not needing to be copied' in the just created snapshot). For all the gory details, see the ``Running fsck in the Background'' paper in the Usenix BSDCon 2002 Conference Proceedings, pages 55-64.
2001-12-14 00:15:06 +00:00
for (cg = 0; cg < fs->fs_ncg; cg++) {
This patch fixes a bug in the logical block calculation macros so that they convert to 64-bit values before shifting rather than afterwards. Once fixed, they can be used rather than inline expanded. Sponsored by: DARPA & NAI Labs.
2003-02-22 00:19:26 +00:00
error = UFS_BALLOC(vp, lfragtosize(fs, cgtod(fs, cg)),
Have to use bread() rather than UFS_BALLOC() when obtaining a previously allocated block as the previous use of the block may have fallen out of the cache. Failure to reread its contents cause zeroed results to be written instead of the proper contents. Conversely, when the block is going to be entirely filled in, it is not necessary reread the old contents. Sponsored by: DARPA & NAI Labs. Approved by: re
2002-12-03 18:19:27 +00:00
fs->fs_bsize, KERNCRED, 0, &nbp);
if (error)
Minimize the time necessary to suspend operations on a filesystem when taking a snapshot. The two time consuming operations are scanning all the filesystem bitmaps to determine which blocks are in use and scanning all the other snapshots so as to be able to expunge their blocks from the view of the current snapshot. The bitmap scanning is broken into two passes. Before suspending the filesystem all bitmaps are scanned. After the suspension, those bitmaps that changed after being scanned the first time are rescanned. Typically there are few bitmaps that need to be rescanned. The expunging of other snapshots is now done after the suspension is released by observing that we can easily identify any blocks that were allocated to them after the suspension (they will be maked as `not needing to be copied' in the just created snapshot). For all the gory details, see the ``Running fsck in the Background'' paper in the Usenix BSDCon 2002 Conference Proceedings, pages 55-64.
2001-12-14 00:15:06 +00:00
goto out;
error = cgaccount(cg, vp, nbp, 1);
bawrite(nbp);
For now on every 10 cyclinder groups flush the buffer cache to free up space. If the buffer cache fills up then the disk systems can grind to a halt. Better tuning can be figured out later. Tested by: Tim, others and work Reviewed by: Kostik Belousov PR: 128832
2008-11-13 17:40:21 +00:00
if (cg % 10 == 0)
Add a third flags argument to ffs_syncvnode to avoid a possible conflict with MNT_WAIT flags that passed in its second argument. This will be MFC'ed together with r232351. Discussed with: kib
2012-03-25 00:02:37 +00:00
ffs_syncvnode(vp, MNT_WAIT, 0);
Minimize the time necessary to suspend operations on a filesystem when taking a snapshot. The two time consuming operations are scanning all the filesystem bitmaps to determine which blocks are in use and scanning all the other snapshots so as to be able to expunge their blocks from the view of the current snapshot. The bitmap scanning is broken into two passes. Before suspending the filesystem all bitmaps are scanned. After the suspension, those bitmaps that changed after being scanned the first time are rescanned. Typically there are few bitmaps that need to be rescanned. The expunging of other snapshots is now done after the suspension is released by observing that we can easily identify any blocks that were allocated to them after the suspension (they will be maked as `not needing to be copied' in the just created snapshot). For all the gory details, see the ``Running fsck in the Background'' paper in the Usenix BSDCon 2002 Conference Proceedings, pages 55-64.
2001-12-14 00:15:06 +00:00
if (error)
goto out;
}
Add snapshots to the fast filesystem. Most of the changes support the gating of system calls that cause modifications to the underlying filesystem. The gating can be enabled by any filesystem that needs to consistently suspend operations by adding the vop_stdgetwritemount to their set of vnops. Once gating is enabled, the function vfs_write_suspend stops all new write operations to a filesystem, allows any filesystem modifying system calls already in progress to complete, then sync's the filesystem to disk and returns. The function vfs_write_resume allows the suspended write operations to begin again. Gating is not added by default for all filesystems as for SMP systems it adds two extra locks to such critical kernel paths as the write system call. Thus, gating should only be added as needed. Details on the use and current status of snapshots in FFS can be found in /sys/ufs/ffs/README.snapshot so for brevity and timelyness is not included here. Unless and until you create a snapshot file, these changes should have no effect on your system (famous last words).
2000-07-11 22:07:57 +00:00
/*
* Change inode to snapshot type file.
*/
Clean up the snapshot code so that it no longer depends on the use of the SF_IMMUTABLE flag to prevent writing. Instead put in explicit checking for the SF_SNAPSHOT flag in the appropriate places. With this change, it is now possible to rename and link to snapshot files. It is also possible to set or clear any of the owner, group, or other read bits on the file, though none of the write or execute bits can be set. There is also an explicit test to prevent the setting or clearing of the SF_SNAPSHOT flag via chflags() or fchflags(). Note also that the modify time cannot be changed as it needs to accurately reflect the time that the snapshot was taken. Submitted by: Robert Watson <rwatson@FreeBSD.org>
2000-07-26 23:07:01 +00:00
ip->i_flags |= SF_SNAPSHOT;
Avoid using casts as lvalues. Introduce DIP_SET macro which sets proper inode field based on UFS version. Use DIP ro read values and DIP_SET to modify them throughout FFS code base.
2004-07-28 06:41:27 +00:00
DIP_SET(ip, i_flags, ip->i_flags);
Add snapshots to the fast filesystem. Most of the changes support the gating of system calls that cause modifications to the underlying filesystem. The gating can be enabled by any filesystem that needs to consistently suspend operations by adding the vop_stdgetwritemount to their set of vnops. Once gating is enabled, the function vfs_write_suspend stops all new write operations to a filesystem, allows any filesystem modifying system calls already in progress to complete, then sync's the filesystem to disk and returns. The function vfs_write_resume allows the suspended write operations to begin again. Gating is not added by default for all filesystems as for SMP systems it adds two extra locks to such critical kernel paths as the write system call. Thus, gating should only be added as needed. Details on the use and current status of snapshots in FFS can be found in /sys/ufs/ffs/README.snapshot so for brevity and timelyness is not included here. Unless and until you create a snapshot file, these changes should have no effect on your system (famous last words).
2000-07-11 22:07:57 +00:00
ip->i_flag |= IN_CHANGE | IN_UPDATE;
/*
* Ensure that the snapshot is completely on disk.
Fix two deadlocks in snapshots: 1) Release the snapshot file lock while suspending the system. Otherwise a process trying to read the lock may block on its containing directory preventing the suspension from completing. Thanks to Sean Kelly <smkelly@zombie.org> for finding this deadlock. 2) Replace some bdwrite's with bawrite's so as not to fill all the buffers with dirty data. The buffers could not be cleaned as the snapshot vnode was locked hence the system could deadlock when making snapshots of really massive filesystems. Thanks to Hidetoshi Shimokawa <simokawa@sat.t.u-tokyo.ac.jp> for figuring this out. Sponsored by: DARPA & NAI Labs.
2002-11-30 07:27:12 +00:00
* Since we have marked it as a snapshot it is safe to
* unlock it as no process will be allowed to write to it.
Add snapshots to the fast filesystem. Most of the changes support the gating of system calls that cause modifications to the underlying filesystem. The gating can be enabled by any filesystem that needs to consistently suspend operations by adding the vop_stdgetwritemount to their set of vnops. Once gating is enabled, the function vfs_write_suspend stops all new write operations to a filesystem, allows any filesystem modifying system calls already in progress to complete, then sync's the filesystem to disk and returns. The function vfs_write_resume allows the suspended write operations to begin again. Gating is not added by default for all filesystems as for SMP systems it adds two extra locks to such critical kernel paths as the write system call. Thus, gating should only be added as needed. Details on the use and current status of snapshots in FFS can be found in /sys/ufs/ffs/README.snapshot so for brevity and timelyness is not included here. Unless and until you create a snapshot file, these changes should have no effect on your system (famous last words).
2000-07-11 22:07:57 +00:00
*/
Add a third flags argument to ffs_syncvnode to avoid a possible conflict with MNT_WAIT flags that passed in its second argument. This will be MFC'ed together with r232351. Discussed with: kib
2012-03-25 00:02:37 +00:00
if ((error = ffs_syncvnode(vp, MNT_WAIT, 0)) != 0)
Add snapshots to the fast filesystem. Most of the changes support the gating of system calls that cause modifications to the underlying filesystem. The gating can be enabled by any filesystem that needs to consistently suspend operations by adding the vop_stdgetwritemount to their set of vnops. Once gating is enabled, the function vfs_write_suspend stops all new write operations to a filesystem, allows any filesystem modifying system calls already in progress to complete, then sync's the filesystem to disk and returns. The function vfs_write_resume allows the suspended write operations to begin again. Gating is not added by default for all filesystems as for SMP systems it adds two extra locks to such critical kernel paths as the write system call. Thus, gating should only be added as needed. Details on the use and current status of snapshots in FFS can be found in /sys/ufs/ffs/README.snapshot so for brevity and timelyness is not included here. Unless and until you create a snapshot file, these changes should have no effect on your system (famous last words).
2000-07-11 22:07:57 +00:00
goto out;
VOP_LOCK1() (and so VOP_LOCK()) and VOP_UNLOCK() are only used in conjuction with 'thread' argument passing which is always curthread. Remove the unuseful extra-argument and pass explicitly curthread to lower layer functions, when necessary. KPI results broken by this change, which should affect several ports, so version bumping and manpage update will be further committed. Tested by: kris, pho, Diego Sardina <siarodx at gmail dot com>
2008-01-13 14:44:15 +00:00
VOP_UNLOCK(vp, 0);
Add snapshots to the fast filesystem. Most of the changes support the gating of system calls that cause modifications to the underlying filesystem. The gating can be enabled by any filesystem that needs to consistently suspend operations by adding the vop_stdgetwritemount to their set of vnops. Once gating is enabled, the function vfs_write_suspend stops all new write operations to a filesystem, allows any filesystem modifying system calls already in progress to complete, then sync's the filesystem to disk and returns. The function vfs_write_resume allows the suspended write operations to begin again. Gating is not added by default for all filesystems as for SMP systems it adds two extra locks to such critical kernel paths as the write system call. Thus, gating should only be added as needed. Details on the use and current status of snapshots in FFS can be found in /sys/ufs/ffs/README.snapshot so for brevity and timelyness is not included here. Unless and until you create a snapshot file, these changes should have no effect on your system (famous last words).
2000-07-11 22:07:57 +00:00
/*
* All allocations are done, so we can now snapshot the system.
*
Minimize the time necessary to suspend operations on a filesystem when taking a snapshot. The two time consuming operations are scanning all the filesystem bitmaps to determine which blocks are in use and scanning all the other snapshots so as to be able to expunge their blocks from the view of the current snapshot. The bitmap scanning is broken into two passes. Before suspending the filesystem all bitmaps are scanned. After the suspension, those bitmaps that changed after being scanned the first time are rescanned. Typically there are few bitmaps that need to be rescanned. The expunging of other snapshots is now done after the suspension is released by observing that we can easily identify any blocks that were allocated to them after the suspension (they will be maked as `not needing to be copied' in the just created snapshot). For all the gory details, see the ``Running fsck in the Background'' paper in the Usenix BSDCon 2002 Conference Proceedings, pages 55-64.
2001-12-14 00:15:06 +00:00
* Recind nice scheduling while running with the filesystem suspended.
*/
Nice, is a property of a process as a whole.. I mistakenly moved it to the ksegroup when breaking up the process structure. Put it back in the proc structure.
2004-06-16 00:26:31 +00:00
if (td->td_proc->p_nice > 0) {
Commit 14/14 of sched_lock decomposition. - Use thread_lock() rather than sched_lock for per-thread scheduling sychronization. - Use the per-process spinlock rather than the sched_lock for per-process scheduling synchronization. Tested by: kris, current@ Tested on: i386, amd64, ULE, 4BSD, libthr, libkse, PREEMPTION, etc. Discussed with: kris, attilio, kmacy, jhb, julian, bde (small parts each)
2007-06-05 00:00:57 +00:00
struct proc *p;
p = td->td_proc;
PROC_LOCK(p);
saved_nice = p->p_nice;
sched_nice(p, 0);
PROC_UNLOCK(p);
Minimize the time necessary to suspend operations on a filesystem when taking a snapshot. The two time consuming operations are scanning all the filesystem bitmaps to determine which blocks are in use and scanning all the other snapshots so as to be able to expunge their blocks from the view of the current snapshot. The bitmap scanning is broken into two passes. Before suspending the filesystem all bitmaps are scanned. After the suspension, those bitmaps that changed after being scanned the first time are rescanned. Typically there are few bitmaps that need to be rescanned. The expunging of other snapshots is now done after the suspension is released by observing that we can easily identify any blocks that were allocated to them after the suspension (they will be maked as `not needing to be copied' in the just created snapshot). For all the gory details, see the ``Running fsck in the Background'' paper in the Usenix BSDCon 2002 Conference Proceedings, pages 55-64.
2001-12-14 00:15:06 +00:00
}
/*
Add snapshots to the fast filesystem. Most of the changes support the gating of system calls that cause modifications to the underlying filesystem. The gating can be enabled by any filesystem that needs to consistently suspend operations by adding the vop_stdgetwritemount to their set of vnops. Once gating is enabled, the function vfs_write_suspend stops all new write operations to a filesystem, allows any filesystem modifying system calls already in progress to complete, then sync's the filesystem to disk and returns. The function vfs_write_resume allows the suspended write operations to begin again. Gating is not added by default for all filesystems as for SMP systems it adds two extra locks to such critical kernel paths as the write system call. Thus, gating should only be added as needed. Details on the use and current status of snapshots in FFS can be found in /sys/ufs/ffs/README.snapshot so for brevity and timelyness is not included here. Unless and until you create a snapshot file, these changes should have no effect on your system (famous last words).
2000-07-11 22:07:57 +00:00
* Suspend operation on filesystem.
*/
for (;;) {
vn_finished_write(wrtmp);
There are several code sequences like vfs_busy(mp); vfs_write_suspend(mp); which are problematic if other thread starts unmount between two calls. The unmount starts a write, while vfs_write_suspend() drain writers. On the other hand, unmount drains busy references, causing the deadlock. Add a flag argument to vfs_write_suspend and require the callers of it to specify VS_SKIP_UNMOUNT flag, when the call is performed not in the mount path, i.e. the covered vnode is not locked. The suspension is not attempted if VS_SKIP_UNMOUNT is specified and unmount is in progress. Reported and tested by: Andreas Longwitz <longwitz@incore.de> Sponsored by: The FreeBSD Foundation MFC after: 3 weeks
2013-07-09 20:49:32 +00:00
if ((error = vfs_write_suspend(vp->v_mount, 0)) != 0) {
Within ufs, the ffs_sync and ffs_fsync functions did not always check for and/or report I/O errors. The result is that a VFS_SYNC or VOP_FSYNC called with MNT_WAIT could loop infinitely on ufs in the presence of a hard error writing a disk sector or in a filesystem full condition. This patch ensures that I/O errors will always be checked and returned. This patch also ensures that every call to VFS_SYNC or VOP_FSYNC with MNT_WAIT set checks for and takes appropriate action when an error is returned. Sponsored by: DARPA & NAI Labs.
2002-10-25 00:20:37 +00:00
vn_start_write(NULL, &wrtmp, V_WAIT);
vn_lock() is currently only used with the 'curthread' passed as argument. Remove this argument and pass curthread directly to underlying VOP_LOCK1() VFS method. This modify makes the code cleaner and in particular remove an annoying dependence helping next lockmgr() cleanup. KPI results, obviously, changed. Manpage and FreeBSD_version will be updated through further commits. As a side note, would be valuable to say that next commits will address a similar cleanup about VFS methods, in particular vop_lock1 and vop_unlock. Tested by: Diego Sardina <siarodx at gmail dot com>, Andrea Di Pasquale <whyx dot it at gmail dot com>
2008-01-10 01:10:58 +00:00
vn_lock(vp, LK_EXCLUSIVE | LK_RETRY);
Within ufs, the ffs_sync and ffs_fsync functions did not always check for and/or report I/O errors. The result is that a VFS_SYNC or VOP_FSYNC called with MNT_WAIT could loop infinitely on ufs in the presence of a hard error writing a disk sector or in a filesystem full condition. This patch ensures that I/O errors will always be checked and returned. This patch also ensures that every call to VFS_SYNC or VOP_FSYNC with MNT_WAIT set checks for and takes appropriate action when an error is returned. Sponsored by: DARPA & NAI Labs.
2002-10-25 00:20:37 +00:00
goto out;
}
Add snapshots to the fast filesystem. Most of the changes support the gating of system calls that cause modifications to the underlying filesystem. The gating can be enabled by any filesystem that needs to consistently suspend operations by adding the vop_stdgetwritemount to their set of vnops. Once gating is enabled, the function vfs_write_suspend stops all new write operations to a filesystem, allows any filesystem modifying system calls already in progress to complete, then sync's the filesystem to disk and returns. The function vfs_write_resume allows the suspended write operations to begin again. Gating is not added by default for all filesystems as for SMP systems it adds two extra locks to such critical kernel paths as the write system call. Thus, gating should only be added as needed. Details on the use and current status of snapshots in FFS can be found in /sys/ufs/ffs/README.snapshot so for brevity and timelyness is not included here. Unless and until you create a snapshot file, these changes should have no effect on your system (famous last words).
2000-07-11 22:07:57 +00:00
if (mp->mnt_kern_flag & MNTK_SUSPENDED)
break;
Brain fault, forgot to update ffs_snapshot.c with the new calling convention for vn_start_write.
2000-07-12 00:27:27 +00:00
vn_start_write(NULL, &wrtmp, V_WAIT);
Add snapshots to the fast filesystem. Most of the changes support the gating of system calls that cause modifications to the underlying filesystem. The gating can be enabled by any filesystem that needs to consistently suspend operations by adding the vop_stdgetwritemount to their set of vnops. Once gating is enabled, the function vfs_write_suspend stops all new write operations to a filesystem, allows any filesystem modifying system calls already in progress to complete, then sync's the filesystem to disk and returns. The function vfs_write_resume allows the suspended write operations to begin again. Gating is not added by default for all filesystems as for SMP systems it adds two extra locks to such critical kernel paths as the write system call. Thus, gating should only be added as needed. Details on the use and current status of snapshots in FFS can be found in /sys/ufs/ffs/README.snapshot so for brevity and timelyness is not included here. Unless and until you create a snapshot file, these changes should have no effect on your system (famous last words).
2000-07-11 22:07:57 +00:00
}
vn_lock() is currently only used with the 'curthread' passed as argument. Remove this argument and pass curthread directly to underlying VOP_LOCK1() VFS method. This modify makes the code cleaner and in particular remove an annoying dependence helping next lockmgr() cleanup. KPI results, obviously, changed. Manpage and FreeBSD_version will be updated through further commits. As a side note, would be valuable to say that next commits will address a similar cleanup about VFS methods, in particular vop_lock1 and vop_unlock. Tested by: Diego Sardina <siarodx at gmail dot com>, Andrea Di Pasquale <whyx dot it at gmail dot com>
2008-01-10 01:10:58 +00:00
vn_lock(vp, LK_EXCLUSIVE | LK_RETRY);
Detect the snapshot file being prematurely unlinked.
2006-05-03 00:29:22 +00:00
if (ip->i_effnlink == 0) {
error = ENOENT; /* Snapshot file unlinked */
goto out1;
}
When taking a snapshot, we must check for active files that have been unlinked (e.g., with a zero link count). We have to expunge all trace of these files from the snapshot so that they are neither reclaimed prematurely by fsck nor saved unnecessarily by dump.
2002-02-02 01:42:44 +00:00
if (collectsnapstats)
nanotime(&starttime);
Copy last block on file system again after file system has been suspended. Obtained from: NetBSD
2006-05-15 23:18:49 +00:00
/* The last block might have changed. Copy it again to be sure. */
error = UFS_BALLOC(vp, lblktosize(fs, (off_t)(numblks - 1)),
fs->fs_bsize, KERNCRED, BA_CLRBUF, &bp);
if (error != 0)
goto out1;
error = readblock(vp, bp, numblks - 1);
bp->b_flags |= B_VALIDSUSPWRT;
bawrite(bp);
if (error != 0)
goto out1;
Add snapshots to the fast filesystem. Most of the changes support the gating of system calls that cause modifications to the underlying filesystem. The gating can be enabled by any filesystem that needs to consistently suspend operations by adding the vop_stdgetwritemount to their set of vnops. Once gating is enabled, the function vfs_write_suspend stops all new write operations to a filesystem, allows any filesystem modifying system calls already in progress to complete, then sync's the filesystem to disk and returns. The function vfs_write_resume allows the suspended write operations to begin again. Gating is not added by default for all filesystems as for SMP systems it adds two extra locks to such critical kernel paths as the write system call. Thus, gating should only be added as needed. Details on the use and current status of snapshots in FFS can be found in /sys/ufs/ffs/README.snapshot so for brevity and timelyness is not included here. Unless and until you create a snapshot file, these changes should have no effect on your system (famous last words).
2000-07-11 22:07:57 +00:00
/*
Minimize the time necessary to suspend operations on a filesystem when taking a snapshot. The two time consuming operations are scanning all the filesystem bitmaps to determine which blocks are in use and scanning all the other snapshots so as to be able to expunge their blocks from the view of the current snapshot. The bitmap scanning is broken into two passes. Before suspending the filesystem all bitmaps are scanned. After the suspension, those bitmaps that changed after being scanned the first time are rescanned. Typically there are few bitmaps that need to be rescanned. The expunging of other snapshots is now done after the suspension is released by observing that we can easily identify any blocks that were allocated to them after the suspension (they will be maked as `not needing to be copied' in the just created snapshot). For all the gory details, see the ``Running fsck in the Background'' paper in the Usenix BSDCon 2002 Conference Proceedings, pages 55-64.
2001-12-14 00:15:06 +00:00
* First, copy all the cylinder group maps that have changed.
Add snapshots to the fast filesystem. Most of the changes support the gating of system calls that cause modifications to the underlying filesystem. The gating can be enabled by any filesystem that needs to consistently suspend operations by adding the vop_stdgetwritemount to their set of vnops. Once gating is enabled, the function vfs_write_suspend stops all new write operations to a filesystem, allows any filesystem modifying system calls already in progress to complete, then sync's the filesystem to disk and returns. The function vfs_write_resume allows the suspended write operations to begin again. Gating is not added by default for all filesystems as for SMP systems it adds two extra locks to such critical kernel paths as the write system call. Thus, gating should only be added as needed. Details on the use and current status of snapshots in FFS can be found in /sys/ufs/ffs/README.snapshot so for brevity and timelyness is not included here. Unless and until you create a snapshot file, these changes should have no effect on your system (famous last words).
2000-07-11 22:07:57 +00:00
*/
for (cg = 0; cg < fs->fs_ncg; cg++) {
Change the atomic_set_char to atomic_set_int and atomic_clear_char to atomic_clear_int to ease the implementation for the sparc64. Requested by: Jake Burkholder <jake@locore.ca>
2001-12-18 18:05:17 +00:00
if ((ACTIVECGNUM(fs, cg) & ACTIVECGOFF(cg)) != 0)
Minimize the time necessary to suspend operations on a filesystem when taking a snapshot. The two time consuming operations are scanning all the filesystem bitmaps to determine which blocks are in use and scanning all the other snapshots so as to be able to expunge their blocks from the view of the current snapshot. The bitmap scanning is broken into two passes. Before suspending the filesystem all bitmaps are scanned. After the suspension, those bitmaps that changed after being scanned the first time are rescanned. Typically there are few bitmaps that need to be rescanned. The expunging of other snapshots is now done after the suspension is released by observing that we can easily identify any blocks that were allocated to them after the suspension (they will be maked as `not needing to be copied' in the just created snapshot). For all the gory details, see the ``Running fsck in the Background'' paper in the Usenix BSDCon 2002 Conference Proceedings, pages 55-64.
2001-12-14 00:15:06 +00:00
continue;
redo++;
This patch fixes a bug in the logical block calculation macros so that they convert to 64-bit values before shifting rather than afterwards. Once fixed, they can be used rather than inline expanded. Sponsored by: DARPA & NAI Labs.
2003-02-22 00:19:26 +00:00
error = UFS_BALLOC(vp, lfragtosize(fs, cgtod(fs, cg)),
Have to use bread() rather than UFS_BALLOC() when obtaining a previously allocated block as the previous use of the block may have fallen out of the cache. Failure to reread its contents cause zeroed results to be written instead of the proper contents. Conversely, when the block is going to be entirely filled in, it is not necessary reread the old contents. Sponsored by: DARPA & NAI Labs. Approved by: re
2002-12-03 18:19:27 +00:00
fs->fs_bsize, KERNCRED, 0, &nbp);
if (error)
Add snapshots to the fast filesystem. Most of the changes support the gating of system calls that cause modifications to the underlying filesystem. The gating can be enabled by any filesystem that needs to consistently suspend operations by adding the vop_stdgetwritemount to their set of vnops. Once gating is enabled, the function vfs_write_suspend stops all new write operations to a filesystem, allows any filesystem modifying system calls already in progress to complete, then sync's the filesystem to disk and returns. The function vfs_write_resume allows the suspended write operations to begin again. Gating is not added by default for all filesystems as for SMP systems it adds two extra locks to such critical kernel paths as the write system call. Thus, gating should only be added as needed. Details on the use and current status of snapshots in FFS can be found in /sys/ufs/ffs/README.snapshot so for brevity and timelyness is not included here. Unless and until you create a snapshot file, these changes should have no effect on your system (famous last words).
2000-07-11 22:07:57 +00:00
goto out1;
Minimize the time necessary to suspend operations on a filesystem when taking a snapshot. The two time consuming operations are scanning all the filesystem bitmaps to determine which blocks are in use and scanning all the other snapshots so as to be able to expunge their blocks from the view of the current snapshot. The bitmap scanning is broken into two passes. Before suspending the filesystem all bitmaps are scanned. After the suspension, those bitmaps that changed after being scanned the first time are rescanned. Typically there are few bitmaps that need to be rescanned. The expunging of other snapshots is now done after the suspension is released by observing that we can easily identify any blocks that were allocated to them after the suspension (they will be maked as `not needing to be copied' in the just created snapshot). For all the gory details, see the ``Running fsck in the Background'' paper in the Usenix BSDCon 2002 Conference Proceedings, pages 55-64.
2001-12-14 00:15:06 +00:00
error = cgaccount(cg, vp, nbp, 2);
Fix a bug introduced in ffs_snapshot.c -r1.25 and fs.h -r1.26 which caused incomplete snapshots to be taken. When background fsck would run on these snapshots, the result would be files being incorrectly released which would subsequently panic the kernel with ``handle_workitem_freefile: inodedep survived'', ``handle_written_inodeblock: live inodedep'', and ``handle_workitem_remove: lost inodedep'' errors.
2002-01-17 08:33:32 +00:00
bawrite(nbp);
Minimize the time necessary to suspend operations on a filesystem when taking a snapshot. The two time consuming operations are scanning all the filesystem bitmaps to determine which blocks are in use and scanning all the other snapshots so as to be able to expunge their blocks from the view of the current snapshot. The bitmap scanning is broken into two passes. Before suspending the filesystem all bitmaps are scanned. After the suspension, those bitmaps that changed after being scanned the first time are rescanned. Typically there are few bitmaps that need to be rescanned. The expunging of other snapshots is now done after the suspension is released by observing that we can easily identify any blocks that were allocated to them after the suspension (they will be maked as `not needing to be copied' in the just created snapshot). For all the gory details, see the ``Running fsck in the Background'' paper in the Usenix BSDCon 2002 Conference Proceedings, pages 55-64.
2001-12-14 00:15:06 +00:00
if (error)
Add snapshots to the fast filesystem. Most of the changes support the gating of system calls that cause modifications to the underlying filesystem. The gating can be enabled by any filesystem that needs to consistently suspend operations by adding the vop_stdgetwritemount to their set of vnops. Once gating is enabled, the function vfs_write_suspend stops all new write operations to a filesystem, allows any filesystem modifying system calls already in progress to complete, then sync's the filesystem to disk and returns. The function vfs_write_resume allows the suspended write operations to begin again. Gating is not added by default for all filesystems as for SMP systems it adds two extra locks to such critical kernel paths as the write system call. Thus, gating should only be added as needed. Details on the use and current status of snapshots in FFS can be found in /sys/ufs/ffs/README.snapshot so for brevity and timelyness is not included here. Unless and until you create a snapshot file, these changes should have no effect on your system (famous last words).
2000-07-11 22:07:57 +00:00
goto out1;
}
Refinement to revision 1.16 of ufs/ffs/ffs_snapshot.c to reduce the amount of time that the filesystem must be suspended. The current snapshot is elided as well as the earlier snapshots.
2001-05-04 05:49:28 +00:00
/*
* Grab a copy of the superblock and its summary information.
* We delay writing it until the suspension is released below.
*/
This update eliminates a lock-order reversal warning discovered whle tracking down the system hang reported in kern/160662 and corrected in revision 225806. The LOR is not the cause of the system hang and indeed cannot cause an actual deadlock. However, it can be easily eliminated by defering the acquisition of a buflock until after all the vnode locks have been acquired. Reported by: Hans Ottevanger PR: kern/160662
2011-09-27 17:41:48 +00:00
copy_fs = malloc((u_long)fs->fs_bsize, M_UFSMNT, M_WAITOK);
Refinement to revision 1.16 of ufs/ffs/ffs_snapshot.c to reduce the amount of time that the filesystem must be suspended. The current snapshot is elided as well as the earlier snapshots.
2001-05-04 05:49:28 +00:00
bcopy(fs, copy_fs, fs->fs_sbsize);
if ((fs->fs_flags & (FS_UNCLEAN | FS_NEEDSFSCK)) == 0)
copy_fs->fs_clean = 1;
Use the appropriate size when zeroing out the unused portion of a snapshot's copy of a superblock. This patch fixes a panic when taking a snapshot of a 4096/512 filesystem. Reported by: Ian Freislich <ianf@za.uu.net> Sponsored by: DARPA & NAI Labs.
2003-03-07 23:49:16 +00:00
size = fs->fs_bsize < SBLOCKSIZE ? fs->fs_bsize : SBLOCKSIZE;
if (fs->fs_sbsize < size)
This update eliminates a lock-order reversal warning discovered whle tracking down the system hang reported in kern/160662 and corrected in revision 225806. The LOR is not the cause of the system hang and indeed cannot cause an actual deadlock. However, it can be easily eliminated by defering the acquisition of a buflock until after all the vnode locks have been acquired. Reported by: Hans Ottevanger PR: kern/160662
2011-09-27 17:41:48 +00:00
bzero(&((char *)copy_fs)[fs->fs_sbsize],
size - fs->fs_sbsize);
Refinement to revision 1.16 of ufs/ffs/ffs_snapshot.c to reduce the amount of time that the filesystem must be suspended. The current snapshot is elided as well as the earlier snapshots.
2001-05-04 05:49:28 +00:00
size = blkroundup(fs, fs->fs_cssize);
if (fs->fs_contigsumsize > 0)
size += fs->fs_ncg * sizeof(int32_t);
Back out M_* changes, per decision of the TRB. Approved by: trb
2003-02-19 05:47:46 +00:00
space = malloc((u_long)size, M_UFSMNT, M_WAITOK);
Refinement to revision 1.16 of ufs/ffs/ffs_snapshot.c to reduce the amount of time that the filesystem must be suspended. The current snapshot is elided as well as the earlier snapshots.
2001-05-04 05:49:28 +00:00
copy_fs->fs_csp = space;
bcopy(fs->fs_csp, copy_fs->fs_csp, fs->fs_cssize);
Avoid assignments to cast expressions. Reviewed by: md5 Approved by: das (mentor)
2004-06-08 13:08:19 +00:00
space = (char *)space + fs->fs_cssize;
Refinement to revision 1.16 of ufs/ffs/ffs_snapshot.c to reduce the amount of time that the filesystem must be suspended. The current snapshot is elided as well as the earlier snapshots.
2001-05-04 05:49:28 +00:00
loc = howmany(fs->fs_cssize, fs->fs_fsize);
Several fixes for units errors: 1) Do not assume that the superblock will be of size fs->fs_bsize. This fixes a panic when taking a snapshot on a filesystem with a block size bigger than 8K. 2) Properly calculate the number of fragments that follow the superblock summary information. This fixes a bug with inconsistent snapshots. 3) When cleaning up a snapshot that is about to be removed, properly calculate the number of blocks that need to be checked. This fixes a bug that created partially allocated inodes. 4) When moving blocks from a snapshot that is about to be removed to another snapshot, properly account for the reduced number of blocks in the snapshot from which they are taken. This fixes a bug in which the number of blocks released from a snapshot did not match the number that it claimed to have.
2001-05-08 07:29:03 +00:00
i = fs->fs_frag - loc % fs->fs_frag;
len = (i == fs->fs_frag) ? 0 : i * fs->fs_fsize;
if (len > 0) {
Remove a race condition / deadlock from snapshots. When converting from individual vnode locks to the snapshot lock, be sure to pass any waiting processes along to the new lock as well. This transfer is done by a new function in the lock manager, transferlockers(from_lock, to_lock); Thanks to Lamont Granquist <lamont@scriptkiddie.org> for his help in pounding on snapshots beyond all reason and finding this deadlock. Sponsored by: DARPA & NAI Labs.
2002-11-30 19:00:51 +00:00
if ((error = bread(devvp, fsbtodb(fs, fs->fs_csaddr + loc),
Refinement to revision 1.16 of ufs/ffs/ffs_snapshot.c to reduce the amount of time that the filesystem must be suspended. The current snapshot is elided as well as the earlier snapshots.
2001-05-04 05:49:28 +00:00
len, KERNCRED, &bp)) != 0) {
When taking a snapshot, we must check for active files that have been unlinked (e.g., with a zero link count). We have to expunge all trace of these files from the snapshot so that they are neither reclaimed prematurely by fsck nor saved unnecessarily by dump.
2002-02-02 01:42:44 +00:00
brelse(bp);
Refinement to revision 1.16 of ufs/ffs/ffs_snapshot.c to reduce the amount of time that the filesystem must be suspended. The current snapshot is elided as well as the earlier snapshots.
2001-05-04 05:49:28 +00:00
free(copy_fs->fs_csp, M_UFSMNT);
This update eliminates a lock-order reversal warning discovered whle tracking down the system hang reported in kern/160662 and corrected in revision 225806. The LOR is not the cause of the system hang and indeed cannot cause an actual deadlock. However, it can be easily eliminated by defering the acquisition of a buflock until after all the vnode locks have been acquired. Reported by: Hans Ottevanger PR: kern/160662
2011-09-27 17:41:48 +00:00
free(copy_fs, M_UFSMNT);
copy_fs = NULL;
Add snapshots to the fast filesystem. Most of the changes support the gating of system calls that cause modifications to the underlying filesystem. The gating can be enabled by any filesystem that needs to consistently suspend operations by adding the vop_stdgetwritemount to their set of vnops. Once gating is enabled, the function vfs_write_suspend stops all new write operations to a filesystem, allows any filesystem modifying system calls already in progress to complete, then sync's the filesystem to disk and returns. The function vfs_write_resume allows the suspended write operations to begin again. Gating is not added by default for all filesystems as for SMP systems it adds two extra locks to such critical kernel paths as the write system call. Thus, gating should only be added as needed. Details on the use and current status of snapshots in FFS can be found in /sys/ufs/ffs/README.snapshot so for brevity and timelyness is not included here. Unless and until you create a snapshot file, these changes should have no effect on your system (famous last words).
2000-07-11 22:07:57 +00:00
goto out1;
Refinement to revision 1.16 of ufs/ffs/ffs_snapshot.c to reduce the amount of time that the filesystem must be suspended. The current snapshot is elided as well as the earlier snapshots.
2001-05-04 05:49:28 +00:00
}
bcopy(bp->b_data, space, (u_int)len);
Avoid assignments to cast expressions. Reviewed by: md5 Approved by: das (mentor)
2004-06-08 13:08:19 +00:00
space = (char *)space + len;
Refinement to revision 1.16 of ufs/ffs/ffs_snapshot.c to reduce the amount of time that the filesystem must be suspended. The current snapshot is elided as well as the earlier snapshots.
2001-05-04 05:49:28 +00:00
bp->b_flags |= B_INVAL | B_NOCACHE;
brelse(bp);
}
if (fs->fs_contigsumsize > 0) {
copy_fs->fs_maxcluster = lp = space;
for (i = 0; i < fs->fs_ncg; i++)
*lp++ = fs->fs_contigsumsize;
Add snapshots to the fast filesystem. Most of the changes support the gating of system calls that cause modifications to the underlying filesystem. The gating can be enabled by any filesystem that needs to consistently suspend operations by adding the vop_stdgetwritemount to their set of vnops. Once gating is enabled, the function vfs_write_suspend stops all new write operations to a filesystem, allows any filesystem modifying system calls already in progress to complete, then sync's the filesystem to disk and returns. The function vfs_write_resume allows the suspended write operations to begin again. Gating is not added by default for all filesystems as for SMP systems it adds two extra locks to such critical kernel paths as the write system call. Thus, gating should only be added as needed. Details on the use and current status of snapshots in FFS can be found in /sys/ufs/ffs/README.snapshot so for brevity and timelyness is not included here. Unless and until you create a snapshot file, these changes should have no effect on your system (famous last words).
2000-07-11 22:07:57 +00:00
}
When taking a snapshot, we must check for active files that have been unlinked (e.g., with a zero link count). We have to expunge all trace of these files from the snapshot so that they are neither reclaimed prematurely by fsck nor saved unnecessarily by dump.
2002-02-02 01:42:44 +00:00
/*
* We must check for active files that have been unlinked
* (e.g., with a zero link count). We have to expunge all
* trace of these files from the snapshot so that they are
* not reclaimed prematurely by fsck or unnecessarily dumped.
* We turn off the MNTK_SUSPENDED flag to avoid a panic from
* spec_strategy about writing on a suspended filesystem.
When creating a snapshot, create a list of initially allocated blocks. Whenever doing a copy-on-write check, first look in the list of initially allocated blocks to see if it is there. If so, no further check is needed. If not, fall through and do the full check. This change eliminates one of two known deadlocks caused by snapshots. Handling the second deadlock will be the subject of another check-in. This change also reduces the cost of the copy-on-write check by speeding up the verification of frequently checked blocks. Sponsored by: DARPA & NAI Labs.
2002-10-09 06:13:48 +00:00
* Note that we skip unlinked snapshot files as they will
* be handled separately below.
This patch fixes a deadlock between the bufdaemon and a process taking a snapshot. As part of taking a snapshot of a filesystem, the kernel builds up a list of the filesystem metadata (such as the cylinder group bitmaps) that are contained in the snapshot. When doing a copy-on-write check, the list is first consulted. If the block being written is found on the list, then the full snapshot lookup can be avoided. Besides providing an important performance speedup this check also avoids a potential deadlock between the code creating the snapshot and the bufdaemon trying to cleanup snapshot related buffers. This fix creates a temporary list containing the key metadata blocks that can cause the deadlock. This temporary list is used between the time that the snapshot is first enabled and the time that the fully complete list is built. Reported by: Attila Nagy <bra@fsn.hu> Sponsored by: DARPA & NAI Labs.
2003-02-22 00:59:34 +00:00
*
* We also calculate the needed size for the snapshot list.
When taking a snapshot, we must check for active files that have been unlinked (e.g., with a zero link count). We have to expunge all trace of these files from the snapshot so that they are neither reclaimed prematurely by fsck nor saved unnecessarily by dump.
2002-02-02 01:42:44 +00:00
*/
This patch fixes a deadlock between the bufdaemon and a process taking a snapshot. As part of taking a snapshot of a filesystem, the kernel builds up a list of the filesystem metadata (such as the cylinder group bitmaps) that are contained in the snapshot. When doing a copy-on-write check, the list is first consulted. If the block being written is found on the list, then the full snapshot lookup can be avoided. Besides providing an important performance speedup this check also avoids a potential deadlock between the code creating the snapshot and the bufdaemon trying to cleanup snapshot related buffers. This fix creates a temporary list containing the key metadata blocks that can cause the deadlock. This temporary list is used between the time that the snapshot is first enabled and the time that the fully complete list is built. Reported by: Attila Nagy <bra@fsn.hu> Sponsored by: DARPA & NAI Labs.
2003-02-22 00:59:34 +00:00
snaplistsize = fs->fs_ncg + howmany(fs->fs_cssize, fs->fs_bsize) +
FSMAXSNAP + 1 /* superblock */ + 1 /* last block */ + 1 /* size */;
Remove mntvnode_mtx and replace it with per-mountpoint mutex. Introduce two new macros MNT_ILOCK(mp)/MNT_IUNLOCK(mp) to operate on this mutex transparently. Eventually new mutex will be protecting more fields in struct mount, not only vnode list. Discussed with: jeff
2003-11-05 04:30:08 +00:00
MNT_ILOCK(mp);
- Use the ufs lock to protect fs_active. Sponsored By: Isilon Systems, Inc.
2005-01-24 10:10:11 +00:00
mp->mnt_kern_flag &= ~MNTK_SUSPENDED;
Replace the MNT_VNODE_FOREACH interface with MNT_VNODE_FOREACH_ALL. The primary changes are that the user of the interface no longer needs to manage the mount-mutex locking and that the vnode that is returned has its mutex locked (thus avoiding the need to check to see if its is DOOMED or other possible end of life senarios). To minimize compatibility issues for third-party developers, the old MNT_VNODE_FOREACH interface will remain available so that this change can be MFC'ed to 9. Following the MFC to 9, MNT_VNODE_FOREACH will be removed in head. The reason for this update is to prepare for the addition of the MNT_VNODE_FOREACH_ACTIVE interface that will loop over just the active vnodes associated with a mount point (typically less than 1% of the vnodes associated with the mount point). Reviewed by: kib Tested by: Peter Holm MFC after: 2 weeks
2012-04-17 16:28:22 +00:00
MNT_IUNLOCK(mp);
When taking a snapshot, we must check for active files that have been unlinked (e.g., with a zero link count). We have to expunge all trace of these files from the snapshot so that they are neither reclaimed prematurely by fsck nor saved unnecessarily by dump.
2002-02-02 01:42:44 +00:00
loop:
Replace the MNT_VNODE_FOREACH interface with MNT_VNODE_FOREACH_ALL. The primary changes are that the user of the interface no longer needs to manage the mount-mutex locking and that the vnode that is returned has its mutex locked (thus avoiding the need to check to see if its is DOOMED or other possible end of life senarios). To minimize compatibility issues for third-party developers, the old MNT_VNODE_FOREACH interface will remain available so that this change can be MFC'ed to 9. Following the MFC to 9, MNT_VNODE_FOREACH will be removed in head. The reason for this update is to prepare for the addition of the MNT_VNODE_FOREACH_ACTIVE interface that will loop over just the active vnodes associated with a mount point (typically less than 1% of the vnodes associated with the mount point). Reviewed by: kib Tested by: Peter Holm MFC after: 2 weeks
2012-04-17 16:28:22 +00:00
MNT_VNODE_FOREACH_ALL(xvp, mp, mvp) {
if ((xvp->v_usecount == 0 &&
Block secondary writes while expunging active unlinked files. Fix detection of active unlinked files by checking VI_OWEINACT and VI_DOINGINACT in addition to v_usecount. Defer inactive handling for unlinked files if the file system is mostly suspended (secondary writes being blocked). Perform deferred inactive handling after the file system is resumed.
2006-03-11 01:08:37 +00:00
(xvp->v_iflag & (VI_OWEINACT | VI_DOINGINACT)) == 0) ||
xvp->v_type == VNON ||
This change avoids a kernel deadlock on "snaplk" when using snapshots on UFS filesystems running with journaled soft updates. This is the first of several bugs that need to be fixed before removing the restriction added in -r230250 to prevent the use of snapshots on filesystems running with journaled soft updates. The deadlock occurs when holding the snapshot lock (snaplk) and then trying to flush an inode via ffs_update(). We become blocked by another process trying to flush a different inode contained in the same inode block that we need. It holds the inode block for which we are waiting locked. When it tries to write the inode block, it gets blocked waiting for the our snaplk when it calls ffs_copyonwrite() to see if the inode block needs to be copied in our snapshot. The most obvious place that this deadlock arises is in the ffs_copyonwrite() routine when it updates critical metadata in a snapshot and tries to write it out before proceeding. The fix here is to write the data and indirect block pointer for the snapshot, but to skip the call to ffs_update() to write the snapshot inode. To ensure that we will never have to update a pointer in the inode itself, the ffs_snapshot() routine that creates the snapshot has to ensure that all the direct blocks are allocated as part of the creation of the snapshot. A less obvious place that this deadlock occurs is when we hold the snaplk because we are deleting a snapshot. In the course of doing the deletion, we need to allocate various soft update dependency structures and allocate some journal space. If we hit a resource limit while doing this we decrease the resources in use by flushing out an existing dirty file to get it to give up the soft dependency resources that it holds. The flush can cause an ffs_update() to be done on the inode for the file that we have selected to flush resulting in the same deadlock as described above when the inode that we have chosen to flush resides in the same inode block as the snapshot inode that we hold. The fix is to defer cleaning up any time that the inode on which we are operating is a snapshot. Help and review by: Jeff Roberson Tested by: Peter Holm MFC (to 9 only) after: 2 weeks
2012-03-01 18:45:25 +00:00
IS_SNAPSHOT(VTOI(xvp))) {
- Fix an unlocked call to GETATTR by slightly shuffling the code in ffs_snapshot() around. - Acquire the interlock before releasing the mntvnode_mtx. Use the interlock to protect v_usecount access.
2003-10-04 14:25:45 +00:00
VI_UNLOCK(xvp);
When taking a snapshot, we must check for active files that have been unlinked (e.g., with a zero link count). We have to expunge all trace of these files from the snapshot so that they are neither reclaimed prematurely by fsck nor saved unnecessarily by dump.
2002-02-02 01:42:44 +00:00
continue;
}
Avoid deadlock which is caused by locking VDIR of parent and VREG of snapshot itself in wrong order. We can skip unlink check of that directory because it must have snapshot in it. Reviewed by: mckusick and current@
2004-06-18 14:35:17 +00:00
/*
* We can skip parent directory vnode because it must have
* this snapshot file in it.
*/
if (xvp == nd.ni_dvp) {
VI_UNLOCK(xvp);
continue;
}
Block secondary writes while expunging active unlinked files. Fix detection of active unlinked files by checking VI_OWEINACT and VI_DOINGINACT in addition to v_usecount. Defer inactive handling for unlinked files if the file system is mostly suspended (secondary writes being blocked). Perform deferred inactive handling after the file system is resumed.
2006-03-11 01:08:37 +00:00
vholdl(xvp);
vn_lock() is currently only used with the 'curthread' passed as argument. Remove this argument and pass curthread directly to underlying VOP_LOCK1() VFS method. This modify makes the code cleaner and in particular remove an annoying dependence helping next lockmgr() cleanup. KPI results, obviously, changed. Manpage and FreeBSD_version will be updated through further commits. As a side note, would be valuable to say that next commits will address a similar cleanup about VFS methods, in particular vop_lock1 and vop_unlock. Tested by: Diego Sardina <siarodx at gmail dot com>, Andrea Di Pasquale <whyx dot it at gmail dot com>
2008-01-10 01:10:58 +00:00
if (vn_lock(xvp, LK_EXCLUSIVE | LK_INTERLOCK) != 0) {
Replace the MNT_VNODE_FOREACH interface with MNT_VNODE_FOREACH_ALL. The primary changes are that the user of the interface no longer needs to manage the mount-mutex locking and that the vnode that is returned has its mutex locked (thus avoiding the need to check to see if its is DOOMED or other possible end of life senarios). To minimize compatibility issues for third-party developers, the old MNT_VNODE_FOREACH interface will remain available so that this change can be MFC'ed to 9. Following the MFC to 9, MNT_VNODE_FOREACH will be removed in head. The reason for this update is to prepare for the addition of the MNT_VNODE_FOREACH_ACTIVE interface that will loop over just the active vnodes associated with a mount point (typically less than 1% of the vnodes associated with the mount point). Reviewed by: kib Tested by: Peter Holm MFC after: 2 weeks
2012-04-17 16:28:22 +00:00
MNT_VNODE_FOREACH_ALL_ABORT(mp, mvp);
Block secondary writes while expunging active unlinked files. Fix detection of active unlinked files by checking VI_OWEINACT and VI_DOINGINACT in addition to v_usecount. Defer inactive handling for unlinked files if the file system is mostly suspended (secondary writes being blocked). Perform deferred inactive handling after the file system is resumed.
2006-03-11 01:08:37 +00:00
vdrop(xvp);
When taking a snapshot, we must check for active files that have been unlinked (e.g., with a zero link count). We have to expunge all trace of these files from the snapshot so that they are neither reclaimed prematurely by fsck nor saved unnecessarily by dump.
2002-02-02 01:42:44 +00:00
goto loop;
- Fix an unlocked call to GETATTR by slightly shuffling the code in ffs_snapshot() around. - Acquire the interlock before releasing the mntvnode_mtx. Use the interlock to protect v_usecount access.
2003-10-04 14:25:45 +00:00
}
Block secondary writes while expunging active unlinked files. Fix detection of active unlinked files by checking VI_OWEINACT and VI_DOINGINACT in addition to v_usecount. Defer inactive handling for unlinked files if the file system is mostly suspended (secondary writes being blocked). Perform deferred inactive handling after the file system is resumed.
2006-03-11 01:08:37 +00:00
VI_LOCK(xvp);
if (xvp->v_usecount == 0 &&
(xvp->v_iflag & (VI_OWEINACT | VI_DOINGINACT)) == 0) {
VI_UNLOCK(xvp);
VOP_LOCK1() (and so VOP_LOCK()) and VOP_UNLOCK() are only used in conjuction with 'thread' argument passing which is always curthread. Remove the unuseful extra-argument and pass explicitly curthread to lower layer functions, when necessary. KPI results broken by this change, which should affect several ports, so version bumping and manpage update will be further committed. Tested by: kris, pho, Diego Sardina <siarodx at gmail dot com>
2008-01-13 14:44:15 +00:00
VOP_UNLOCK(xvp, 0);
Block secondary writes while expunging active unlinked files. Fix detection of active unlinked files by checking VI_OWEINACT and VI_DOINGINACT in addition to v_usecount. Defer inactive handling for unlinked files if the file system is mostly suspended (secondary writes being blocked). Perform deferred inactive handling after the file system is resumed.
2006-03-11 01:08:37 +00:00
vdrop(xvp);
continue;
}
VI_UNLOCK(xvp);
Avoid calling vprint on a vnode while holding its interlock mutex. Move diagnostic printf after vget. This might delay the debug output some, but at least it keeps kernel from exploding if DEBUG_VFS_LOCKS is in effect.
2004-01-04 04:08:34 +00:00
if (snapdebug)
vprint("ffs_snapshot: busy vnode", xvp);
Decontextualize the couplet VOP_GETATTR / VOP_SETATTR as the passed thread was always curthread and totally unuseful. Tested by: Giovanni Trematerra <giovanni dot trematerra at gmail dot com>
2008-08-28 15:23:18 +00:00
if (VOP_GETATTR(xvp, &vat, td->td_ucred) == 0 &&
- Fix an unlocked call to GETATTR by slightly shuffling the code in ffs_snapshot() around. - Acquire the interlock before releasing the mntvnode_mtx. Use the interlock to protect v_usecount access.
2003-10-04 14:25:45 +00:00
vat.va_nlink > 0) {
VOP_LOCK1() (and so VOP_LOCK()) and VOP_UNLOCK() are only used in conjuction with 'thread' argument passing which is always curthread. Remove the unuseful extra-argument and pass explicitly curthread to lower layer functions, when necessary. KPI results broken by this change, which should affect several ports, so version bumping and manpage update will be further committed. Tested by: kris, pho, Diego Sardina <siarodx at gmail dot com>
2008-01-13 14:44:15 +00:00
VOP_UNLOCK(xvp, 0);
Block secondary writes while expunging active unlinked files. Fix detection of active unlinked files by checking VI_OWEINACT and VI_DOINGINACT in addition to v_usecount. Defer inactive handling for unlinked files if the file system is mostly suspended (secondary writes being blocked). Perform deferred inactive handling after the file system is resumed.
2006-03-11 01:08:37 +00:00
vdrop(xvp);
- Fix an unlocked call to GETATTR by slightly shuffling the code in ffs_snapshot() around. - Acquire the interlock before releasing the mntvnode_mtx. Use the interlock to protect v_usecount access.
2003-10-04 14:25:45 +00:00
continue;
}
When taking a snapshot, we must check for active files that have been unlinked (e.g., with a zero link count). We have to expunge all trace of these files from the snapshot so that they are neither reclaimed prematurely by fsck nor saved unnecessarily by dump.
2002-02-02 01:42:44 +00:00
xp = VTOI(xvp);
This patch fixes a bug on an active filesystem on which a snapshot is being taken from panicing with either "freeing free block" or "freeing free inode". The problem arises when the snapshot code is scanning the filesystem looking for inodes with a reference count of zero (e.g., unlinked but still open) so that it can expunge them from its view. If it encounters a reclaimed vnode and has to restart its scan, then it will panic if it encounters and tries to free an inode that it has already processed. The fix is to check each candidate inode to see if it has already been processed before trying to delete it from the snapshot image. Sponsored by: DARPA & NAI Labs.
2003-02-22 00:29:51 +00:00
if (ffs_checkfreefile(copy_fs, vp, xp->i_number)) {
VOP_LOCK1() (and so VOP_LOCK()) and VOP_UNLOCK() are only used in conjuction with 'thread' argument passing which is always curthread. Remove the unuseful extra-argument and pass explicitly curthread to lower layer functions, when necessary. KPI results broken by this change, which should affect several ports, so version bumping and manpage update will be further committed. Tested by: kris, pho, Diego Sardina <siarodx at gmail dot com>
2008-01-13 14:44:15 +00:00
VOP_UNLOCK(xvp, 0);
Block secondary writes while expunging active unlinked files. Fix detection of active unlinked files by checking VI_OWEINACT and VI_DOINGINACT in addition to v_usecount. Defer inactive handling for unlinked files if the file system is mostly suspended (secondary writes being blocked). Perform deferred inactive handling after the file system is resumed.
2006-03-11 01:08:37 +00:00
vdrop(xvp);
This patch fixes a bug on an active filesystem on which a snapshot is being taken from panicing with either "freeing free block" or "freeing free inode". The problem arises when the snapshot code is scanning the filesystem looking for inodes with a reference count of zero (e.g., unlinked but still open) so that it can expunge them from its view. If it encounters a reclaimed vnode and has to restart its scan, then it will panic if it encounters and tries to free an inode that it has already processed. The fix is to check each candidate inode to see if it has already been processed before trying to delete it from the snapshot image. Sponsored by: DARPA & NAI Labs.
2003-02-22 00:29:51 +00:00
continue;
}
When taking a snapshot, we must check for active files that have been unlinked (e.g., with a zero link count). We have to expunge all trace of these files from the snapshot so that they are neither reclaimed prematurely by fsck nor saved unnecessarily by dump.
2002-02-02 01:42:44 +00:00
/*
* If there is a fragment, clear it here.
*/
blkno = 0;
loc = howmany(xp->i_size, fs->fs_bsize) - 1;
if (loc < NDADDR) {
len = fragroundup(fs, blkoff(fs, xp->i_size));
When clearing a fragment, it's possible that the length is zero. Reviewed by: mckusick MFC After: 1 week
2005-02-19 07:31:33 +00:00
if (len != 0 && len < fs->fs_bsize) {
- Use the ufs lock to protect fs_active. Sponsored By: Isilon Systems, Inc.
2005-01-24 10:10:11 +00:00
ffs_blkfree(ump, copy_fs, vp,
- Merge soft-updates journaling from projects/suj/head into head. This brings in support for an optional intent log which eliminates the need for background fsck on unclean shutdown. Sponsored by: iXsystems, Yahoo!, and Juniper. With help from: McKusick and Peter Holm
2010-04-24 07:05:35 +00:00
DIP(xp, i_db[loc]), len, xp->i_number,
Ensure that filesystem metadata contained within persistent snapshots is always kept consistent. Suggested by: Jeff Roberson
2011-06-15 23:19:09 +00:00
xvp->v_type, NULL);
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
blkno = DIP(xp, i_db[loc]);
Avoid using casts as lvalues. Introduce DIP_SET macro which sets proper inode field based on UFS version. Use DIP ro read values and DIP_SET to modify them throughout FFS code base.
2004-07-28 06:41:27 +00:00
DIP_SET(xp, i_db[loc], 0);
When taking a snapshot, we must check for active files that have been unlinked (e.g., with a zero link count). We have to expunge all trace of these files from the snapshot so that they are neither reclaimed prematurely by fsck nor saved unnecessarily by dump.
2002-02-02 01:42:44 +00:00
}
}
This patch fixes a deadlock between the bufdaemon and a process taking a snapshot. As part of taking a snapshot of a filesystem, the kernel builds up a list of the filesystem metadata (such as the cylinder group bitmaps) that are contained in the snapshot. When doing a copy-on-write check, the list is first consulted. If the block being written is found on the list, then the full snapshot lookup can be avoided. Besides providing an important performance speedup this check also avoids a potential deadlock between the code creating the snapshot and the bufdaemon trying to cleanup snapshot related buffers. This fix creates a temporary list containing the key metadata blocks that can cause the deadlock. This temporary list is used between the time that the snapshot is first enabled and the time that the fully complete list is built. Reported by: Attila Nagy <bra@fsn.hu> Sponsored by: DARPA & NAI Labs.
2003-02-22 00:59:34 +00:00
snaplistsize += 1;
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
if (xp->i_ump->um_fstype == UFS1)
error = expunge_ufs1(vp, xp, copy_fs, fullacct_ufs1,
- Merge soft-updates journaling from projects/suj/head into head. This brings in support for an optional intent log which eliminates the need for background fsck on unclean shutdown. Sponsored by: iXsystems, Yahoo!, and Juniper. With help from: McKusick and Peter Holm
2010-04-24 07:05:35 +00:00
BLK_NOCOPY, 1);
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
else
error = expunge_ufs2(vp, xp, copy_fs, fullacct_ufs2,
- Merge soft-updates journaling from projects/suj/head into head. This brings in support for an optional intent log which eliminates the need for background fsck on unclean shutdown. Sponsored by: iXsystems, Yahoo!, and Juniper. With help from: McKusick and Peter Holm
2010-04-24 07:05:35 +00:00
BLK_NOCOPY, 1);
When taking a snapshot, we must check for active files that have been unlinked (e.g., with a zero link count). We have to expunge all trace of these files from the snapshot so that they are neither reclaimed prematurely by fsck nor saved unnecessarily by dump.
2002-02-02 01:42:44 +00:00
if (blkno)
Avoid using casts as lvalues. Introduce DIP_SET macro which sets proper inode field based on UFS version. Use DIP ro read values and DIP_SET to modify them throughout FFS code base.
2004-07-28 06:41:27 +00:00
DIP_SET(xp, i_db[loc], blkno);
When taking a snapshot, we must check for active files that have been unlinked (e.g., with a zero link count). We have to expunge all trace of these files from the snapshot so that they are neither reclaimed prematurely by fsck nor saved unnecessarily by dump.
2002-02-02 01:42:44 +00:00
if (!error)
- Use the ufs lock to protect fs_active. Sponsored By: Isilon Systems, Inc.
2005-01-24 10:10:11 +00:00
error = ffs_freefile(ump, copy_fs, vp, xp->i_number,
- Merge soft-updates journaling from projects/suj/head into head. This brings in support for an optional intent log which eliminates the need for background fsck on unclean shutdown. Sponsored by: iXsystems, Yahoo!, and Juniper. With help from: McKusick and Peter Holm
2010-04-24 07:05:35 +00:00
xp->i_mode, NULL);
VOP_LOCK1() (and so VOP_LOCK()) and VOP_UNLOCK() are only used in conjuction with 'thread' argument passing which is always curthread. Remove the unuseful extra-argument and pass explicitly curthread to lower layer functions, when necessary. KPI results broken by this change, which should affect several ports, so version bumping and manpage update will be further committed. Tested by: kris, pho, Diego Sardina <siarodx at gmail dot com>
2008-01-13 14:44:15 +00:00
VOP_UNLOCK(xvp, 0);
Block secondary writes while expunging active unlinked files. Fix detection of active unlinked files by checking VI_OWEINACT and VI_DOINGINACT in addition to v_usecount. Defer inactive handling for unlinked files if the file system is mostly suspended (secondary writes being blocked). Perform deferred inactive handling after the file system is resumed.
2006-03-11 01:08:37 +00:00
vdrop(xvp);
When taking a snapshot, we must check for active files that have been unlinked (e.g., with a zero link count). We have to expunge all trace of these files from the snapshot so that they are neither reclaimed prematurely by fsck nor saved unnecessarily by dump.
2002-02-02 01:42:44 +00:00
if (error) {
free(copy_fs->fs_csp, M_UFSMNT);
This update eliminates a lock-order reversal warning discovered whle tracking down the system hang reported in kern/160662 and corrected in revision 225806. The LOR is not the cause of the system hang and indeed cannot cause an actual deadlock. However, it can be easily eliminated by defering the acquisition of a buflock until after all the vnode locks have been acquired. Reported by: Hans Ottevanger PR: kern/160662
2011-09-27 17:41:48 +00:00
free(copy_fs, M_UFSMNT);
copy_fs = NULL;
Replace the MNT_VNODE_FOREACH interface with MNT_VNODE_FOREACH_ALL. The primary changes are that the user of the interface no longer needs to manage the mount-mutex locking and that the vnode that is returned has its mutex locked (thus avoiding the need to check to see if its is DOOMED or other possible end of life senarios). To minimize compatibility issues for third-party developers, the old MNT_VNODE_FOREACH interface will remain available so that this change can be MFC'ed to 9. Following the MFC to 9, MNT_VNODE_FOREACH will be removed in head. The reason for this update is to prepare for the addition of the MNT_VNODE_FOREACH_ACTIVE interface that will loop over just the active vnodes associated with a mount point (typically less than 1% of the vnodes associated with the mount point). Reviewed by: kib Tested by: Peter Holm MFC after: 2 weeks
2012-04-17 16:28:22 +00:00
MNT_VNODE_FOREACH_ALL_ABORT(mp, mvp);
When taking a snapshot, we must check for active files that have been unlinked (e.g., with a zero link count). We have to expunge all trace of these files from the snapshot so that they are neither reclaimed prematurely by fsck nor saved unnecessarily by dump.
2002-02-02 01:42:44 +00:00
goto out1;
}
}
- Merge soft-updates journaling from projects/suj/head into head. This brings in support for an optional intent log which eliminates the need for background fsck on unclean shutdown. Sponsored by: iXsystems, Yahoo!, and Juniper. With help from: McKusick and Peter Holm
2010-04-24 07:05:35 +00:00
/*
* Erase the journal file from the snapshot.
*/
if (fs->fs_flags & FS_SUJ) {
error = softdep_journal_lookup(mp, &xvp);
if (error) {
free(copy_fs->fs_csp, M_UFSMNT);
This update eliminates a lock-order reversal warning discovered whle tracking down the system hang reported in kern/160662 and corrected in revision 225806. The LOR is not the cause of the system hang and indeed cannot cause an actual deadlock. However, it can be easily eliminated by defering the acquisition of a buflock until after all the vnode locks have been acquired. Reported by: Hans Ottevanger PR: kern/160662
2011-09-27 17:41:48 +00:00
free(copy_fs, M_UFSMNT);
copy_fs = NULL;
- Merge soft-updates journaling from projects/suj/head into head. This brings in support for an optional intent log which eliminates the need for background fsck on unclean shutdown. Sponsored by: iXsystems, Yahoo!, and Juniper. With help from: McKusick and Peter Holm
2010-04-24 07:05:35 +00:00
goto out1;
}
xp = VTOI(xvp);
if (xp->i_ump->um_fstype == UFS1)
error = expunge_ufs1(vp, xp, copy_fs, fullacct_ufs1,
BLK_NOCOPY, 0);
else
error = expunge_ufs2(vp, xp, copy_fs, fullacct_ufs2,
BLK_NOCOPY, 0);
vput(xvp);
}
Change locking so that all snapshots on a particular filesystem share a common lock. This change avoids a deadlock between snapshots when separate requests cause them to deadlock checking each other for a need to copy blocks that are close enough together that they fall into the same indirect block. Although I had anticipated a slowdown from contention for the single lock, my filesystem benchmarks show no measurable change in throughput on a uniprocessor system with three active snapshots. I conjecture that this result is because every copy-on-write fault must check all the active snapshots, so the process was inherently serial already. This change removes the last of the deadlocks of which I am aware in snapshots. Sponsored by: DARPA & NAI Labs.
2002-10-16 00:19:23 +00:00
/*
- Don't free snapdata structures when they are no longer in use. Keeping the lockmgr lock valid allows us to switch the v_lock pointer in snapshot vnodes between the embedded lockmgr lock and snapdata lock without needing the vnode interlock to protect against races - Keep unused snapdata structures in a list. - Add a function to lock the devvp and allocate a snapdata to it or acquire a new one without races. The old function was safe from creation races because we set the mount flag when creating snapshots and thus serializing them. However, it might have been subject to destroying races. Reviewed by: tegge
2008-03-31 07:47:08 +00:00
* Acquire a lock on the snapdata structure, creating it if necessary.
Change locking so that all snapshots on a particular filesystem share a common lock. This change avoids a deadlock between snapshots when separate requests cause them to deadlock checking each other for a need to copy blocks that are close enough together that they fall into the same indirect block. Although I had anticipated a slowdown from contention for the single lock, my filesystem benchmarks show no measurable change in throughput on a uniprocessor system with three active snapshots. I conjecture that this result is because every copy-on-write fault must check all the active snapshots, so the process was inherently serial already. This change removes the last of the deadlocks of which I am aware in snapshots. Sponsored by: DARPA & NAI Labs.
2002-10-16 00:19:23 +00:00
*/
- Don't free snapdata structures when they are no longer in use. Keeping the lockmgr lock valid allows us to switch the v_lock pointer in snapshot vnodes between the embedded lockmgr lock and snapdata lock without needing the vnode interlock to protect against races - Keep unused snapdata structures in a list. - Add a function to lock the devvp and allocate a snapdata to it or acquire a new one without races. The old function was safe from creation races because we set the mount flag when creating snapshots and thus serializing them. However, it might have been subject to destroying races. Reviewed by: tegge
2008-03-31 07:47:08 +00:00
sn = ffs_snapdata_acquire(devvp);
/*
* Change vnode to use shared snapshot lock instead of the original
* private lock.
*/
vp->v_vnlock = &sn->sn_lock;
Cleanup lockmgr interface and exported KPI: - Remove the "thread" argument from the lockmgr() function as it is always curthread now - Axe lockcount() function as it is no longer used - Axe LOCKMGR_ASSERT() as it is bogus really and no currently used. Hopefully this will be soonly replaced by something suitable for it. - Remove the prototype for dumplockinfo() as the function is no longer present Addictionally: - Introduce a KASSERT() in lockstatus() in order to let it accept only curthread or NULL as they should only be passed - Do a little bit of style(9) cleanup on lockmgr.h KPI results heavilly broken by this change, so manpages and FreeBSD_version will be modified accordingly by further commits. Tested by: matteo
2008-01-24 12:34:30 +00:00
lockmgr(&vp->v_lock, LK_RELEASE, NULL);
- Don't free snapdata structures when they are no longer in use. Keeping the lockmgr lock valid allows us to switch the v_lock pointer in snapshot vnodes between the embedded lockmgr lock and snapdata lock without needing the vnode interlock to protect against races - Keep unused snapdata structures in a list. - Add a function to lock the devvp and allocate a snapdata to it or acquire a new one without races. The old function was safe from creation races because we set the mount flag when creating snapshots and thus serializing them. However, it might have been subject to destroying races. Reviewed by: tegge
2008-03-31 07:47:08 +00:00
xp = TAILQ_FIRST(&sn->sn_head);
This patch fixes a deadlock between the bufdaemon and a process taking a snapshot. As part of taking a snapshot of a filesystem, the kernel builds up a list of the filesystem metadata (such as the cylinder group bitmaps) that are contained in the snapshot. When doing a copy-on-write check, the list is first consulted. If the block being written is found on the list, then the full snapshot lookup can be avoided. Besides providing an important performance speedup this check also avoids a potential deadlock between the code creating the snapshot and the bufdaemon trying to cleanup snapshot related buffers. This fix creates a temporary list containing the key metadata blocks that can cause the deadlock. This temporary list is used between the time that the snapshot is first enabled and the time that the fully complete list is built. Reported by: Attila Nagy <bra@fsn.hu> Sponsored by: DARPA & NAI Labs.
2003-02-22 00:59:34 +00:00
/*
* If this is the first snapshot on this filesystem, then we need
* to allocate the space for the list of preallocated snapshot blocks.
* This list will be refined below, but this preliminary one will
* keep us out of deadlock until the full one is ready.
*/
if (xp == NULL) {
Retire the MALLOC and FREE macros. They are an abomination unto style(9). MFC after: 3 months
2008-10-23 15:53:51 +00:00
snapblklist = malloc(snaplistsize * sizeof(daddr_t),
This patch fixes a deadlock between the bufdaemon and a process taking a snapshot. As part of taking a snapshot of a filesystem, the kernel builds up a list of the filesystem metadata (such as the cylinder group bitmaps) that are contained in the snapshot. When doing a copy-on-write check, the list is first consulted. If the block being written is found on the list, then the full snapshot lookup can be avoided. Besides providing an important performance speedup this check also avoids a potential deadlock between the code creating the snapshot and the bufdaemon trying to cleanup snapshot related buffers. This fix creates a temporary list containing the key metadata blocks that can cause the deadlock. This temporary list is used between the time that the snapshot is first enabled and the time that the fully complete list is built. Reported by: Attila Nagy <bra@fsn.hu> Sponsored by: DARPA & NAI Labs.
2003-02-22 00:59:34 +00:00
M_UFSMNT, M_WAITOK);
blkp = &snapblklist[1];
*blkp++ = lblkno(fs, fs->fs_sblockloc);
blkno = fragstoblks(fs, fs->fs_csaddr);
for (cg = 0; cg < fs->fs_ncg; cg++) {
if (fragstoblks(fs, cgtod(fs, cg) > blkno))
break;
*blkp++ = fragstoblks(fs, cgtod(fs, cg));
}
len = howmany(fs->fs_cssize, fs->fs_bsize);
for (loc = 0; loc < len; loc++)
*blkp++ = blkno + loc;
for (; cg < fs->fs_ncg; cg++)
*blkp++ = fragstoblks(fs, cgtod(fs, cg));
snapblklist[0] = blkp - snapblklist;
VI_LOCK(devvp);
Create struct snapdata which contains the snapshot fields from cdev and the previously malloc'ed snapshot lock. Malloc struct snapdata instead of just the lock. Replace snapshot fields in cdev with pointer to snapdata (saves 16 bytes). While here, give the private readblock() function a vnode argument in preparation for moving UFS to access GEOM directly.
2004-09-13 07:29:45 +00:00
if (sn->sn_blklist != NULL)
This patch fixes a deadlock between the bufdaemon and a process taking a snapshot. As part of taking a snapshot of a filesystem, the kernel builds up a list of the filesystem metadata (such as the cylinder group bitmaps) that are contained in the snapshot. When doing a copy-on-write check, the list is first consulted. If the block being written is found on the list, then the full snapshot lookup can be avoided. Besides providing an important performance speedup this check also avoids a potential deadlock between the code creating the snapshot and the bufdaemon trying to cleanup snapshot related buffers. This fix creates a temporary list containing the key metadata blocks that can cause the deadlock. This temporary list is used between the time that the snapshot is first enabled and the time that the fully complete list is built. Reported by: Attila Nagy <bra@fsn.hu> Sponsored by: DARPA & NAI Labs.
2003-02-22 00:59:34 +00:00
panic("ffs_snapshot: non-empty list");
Create struct snapdata which contains the snapshot fields from cdev and the previously malloc'ed snapshot lock. Malloc struct snapdata instead of just the lock. Replace snapshot fields in cdev with pointer to snapdata (saves 16 bytes). While here, give the private readblock() function a vnode argument in preparation for moving UFS to access GEOM directly.
2004-09-13 07:29:45 +00:00
sn->sn_blklist = snapblklist;
sn->sn_listsize = blkp - snapblklist;
This patch fixes a deadlock between the bufdaemon and a process taking a snapshot. As part of taking a snapshot of a filesystem, the kernel builds up a list of the filesystem metadata (such as the cylinder group bitmaps) that are contained in the snapshot. When doing a copy-on-write check, the list is first consulted. If the block being written is found on the list, then the full snapshot lookup can be avoided. Besides providing an important performance speedup this check also avoids a potential deadlock between the code creating the snapshot and the bufdaemon trying to cleanup snapshot related buffers. This fix creates a temporary list containing the key metadata blocks that can cause the deadlock. This temporary list is used between the time that the snapshot is first enabled and the time that the fully complete list is built. Reported by: Attila Nagy <bra@fsn.hu> Sponsored by: DARPA & NAI Labs.
2003-02-22 00:59:34 +00:00
VI_UNLOCK(devvp);
}
Add snapshots to the fast filesystem. Most of the changes support the gating of system calls that cause modifications to the underlying filesystem. The gating can be enabled by any filesystem that needs to consistently suspend operations by adding the vop_stdgetwritemount to their set of vnops. Once gating is enabled, the function vfs_write_suspend stops all new write operations to a filesystem, allows any filesystem modifying system calls already in progress to complete, then sync's the filesystem to disk and returns. The function vfs_write_resume allows the suspended write operations to begin again. Gating is not added by default for all filesystems as for SMP systems it adds two extra locks to such critical kernel paths as the write system call. Thus, gating should only be added as needed. Details on the use and current status of snapshots in FFS can be found in /sys/ufs/ffs/README.snapshot so for brevity and timelyness is not included here. Unless and until you create a snapshot file, these changes should have no effect on your system (famous last words).
2000-07-11 22:07:57 +00:00
/*
* Record snapshot inode. Since this is the newest snapshot,
* it must be placed at the end of the list.
*/
Remove a race condition / deadlock from snapshots. When converting from individual vnode locks to the snapshot lock, be sure to pass any waiting processes along to the new lock as well. This transfer is done by a new function in the lock manager, transferlockers(from_lock, to_lock); Thanks to Lamont Granquist <lamont@scriptkiddie.org> for his help in pounding on snapshots beyond all reason and finding this deadlock. Sponsored by: DARPA & NAI Labs.
2002-11-30 19:00:51 +00:00
VI_LOCK(devvp);
Add snapshots to the fast filesystem. Most of the changes support the gating of system calls that cause modifications to the underlying filesystem. The gating can be enabled by any filesystem that needs to consistently suspend operations by adding the vop_stdgetwritemount to their set of vnops. Once gating is enabled, the function vfs_write_suspend stops all new write operations to a filesystem, allows any filesystem modifying system calls already in progress to complete, then sync's the filesystem to disk and returns. The function vfs_write_resume allows the suspended write operations to begin again. Gating is not added by default for all filesystems as for SMP systems it adds two extra locks to such critical kernel paths as the write system call. Thus, gating should only be added as needed. Details on the use and current status of snapshots in FFS can be found in /sys/ufs/ffs/README.snapshot so for brevity and timelyness is not included here. Unless and until you create a snapshot file, these changes should have no effect on your system (famous last words).
2000-07-11 22:07:57 +00:00
fs->fs_snapinum[snaploc] = ip->i_number;
Fixes to track snapshot copy-on-write checking in the specinfo structure rather than assuming that the device vnode would reside in the FFS filesystem (which is obviously a broken assumption with the device filesystem).
2001-03-07 07:09:55 +00:00
if (ip->i_nextsnap.tqe_prev != 0)
Fix up kernel sources to be ready for a 64-bit ino_t. Original code by: Gleb Kurtsou
2012-09-27 23:30:49 +00:00
panic("ffs_snapshot: %ju already on list",
(uintmax_t)ip->i_number);
Create struct snapdata which contains the snapshot fields from cdev and the previously malloc'ed snapshot lock. Malloc struct snapdata instead of just the lock. Replace snapshot fields in cdev with pointer to snapdata (saves 16 bytes). While here, give the private readblock() function a vnode argument in preparation for moving UFS to access GEOM directly.
2004-09-13 07:29:45 +00:00
TAILQ_INSERT_TAIL(&sn->sn_head, ip, i_nextsnap);
Remove a race condition / deadlock from snapshots. When converting from individual vnode locks to the snapshot lock, be sure to pass any waiting processes along to the new lock as well. This transfer is done by a new function in the lock manager, transferlockers(from_lock, to_lock); Thanks to Lamont Granquist <lamont@scriptkiddie.org> for his help in pounding on snapshots beyond all reason and finding this deadlock. Sponsored by: DARPA & NAI Labs.
2002-11-30 19:00:51 +00:00
devvp->v_vflag |= VV_COPYONWRITE;
VI_UNLOCK(devvp);
- Replace v_flag with v_iflag and v_vflag - v_vflag is protected by the vnode lock and is used when synchronization with VOP calls is needed. - v_iflag is protected by interlock and is used for dealing with vnode management issues. These flags include X/O LOCK, FREE, DOOMED, etc. - All accesses to v_iflag and v_vflag have either been locked or marked with mp_fixme's. - Many ASSERT_VOP_LOCKED calls have been added where the locking was not clear. - Many functions in vfs_subr.c were restructured to provide for stronger locking. Idea stolen from: BSD/OS
2002-08-04 10:29:36 +00:00
ASSERT_VOP_LOCKED(vp, "ffs_snapshot vp");
Minimize the time necessary to suspend operations on a filesystem when taking a snapshot. The two time consuming operations are scanning all the filesystem bitmaps to determine which blocks are in use and scanning all the other snapshots so as to be able to expunge their blocks from the view of the current snapshot. The bitmap scanning is broken into two passes. Before suspending the filesystem all bitmaps are scanned. After the suspension, those bitmaps that changed after being scanned the first time are rescanned. Typically there are few bitmaps that need to be rescanned. The expunging of other snapshots is now done after the suspension is released by observing that we can easily identify any blocks that were allocated to them after the suspension (they will be maked as `not needing to be copied' in the just created snapshot). For all the gory details, see the ``Running fsck in the Background'' paper in the Usenix BSDCon 2002 Conference Proceedings, pages 55-64.
2001-12-14 00:15:06 +00:00
out1:
This update eliminates a lock-order reversal warning discovered whle tracking down the system hang reported in kern/160662 and corrected in revision 225806. The LOR is not the cause of the system hang and indeed cannot cause an actual deadlock. However, it can be easily eliminated by defering the acquisition of a buflock until after all the vnode locks have been acquired. Reported by: Hans Ottevanger PR: kern/160662
2011-09-27 17:41:48 +00:00
KASSERT((sn != NULL && copy_fs != NULL && error == 0) ||
(sn == NULL && copy_fs == NULL && error != 0),
Errors detected while file system is suspended should not trigger an assertion failure.
2006-05-15 22:52:22 +00:00
("email phk@ and mckusick@"));
Add snapshots to the fast filesystem. Most of the changes support the gating of system calls that cause modifications to the underlying filesystem. The gating can be enabled by any filesystem that needs to consistently suspend operations by adding the vop_stdgetwritemount to their set of vnops. Once gating is enabled, the function vfs_write_suspend stops all new write operations to a filesystem, allows any filesystem modifying system calls already in progress to complete, then sync's the filesystem to disk and returns. The function vfs_write_resume allows the suspended write operations to begin again. Gating is not added by default for all filesystems as for SMP systems it adds two extra locks to such critical kernel paths as the write system call. Thus, gating should only be added as needed. Details on the use and current status of snapshots in FFS can be found in /sys/ufs/ffs/README.snapshot so for brevity and timelyness is not included here. Unless and until you create a snapshot file, these changes should have no effect on your system (famous last words).
2000-07-11 22:07:57 +00:00
/*
* Resume operation on filesystem.
*/
Add flags argument to vfs_write_resume() and remove vfs_write_resume_flags(). Sponsored by: The FreeBSD Foundation
2013-01-11 06:08:32 +00:00
vfs_write_resume(vp->v_mount, VR_START_WRITE | VR_NO_SUSPCLR);
Minimize the time necessary to suspend operations on a filesystem when taking a snapshot. The two time consuming operations are scanning all the filesystem bitmaps to determine which blocks are in use and scanning all the other snapshots so as to be able to expunge their blocks from the view of the current snapshot. The bitmap scanning is broken into two passes. Before suspending the filesystem all bitmaps are scanned. After the suspension, those bitmaps that changed after being scanned the first time are rescanned. Typically there are few bitmaps that need to be rescanned. The expunging of other snapshots is now done after the suspension is released by observing that we can easily identify any blocks that were allocated to them after the suspension (they will be maked as `not needing to be copied' in the just created snapshot). For all the gory details, see the ``Running fsck in the Background'' paper in the Usenix BSDCon 2002 Conference Proceedings, pages 55-64.
2001-12-14 00:15:06 +00:00
if (collectsnapstats && starttime.tv_sec > 0) {
nanotime(&endtime);
timespecsub(&endtime, &starttime);
Do not assume that time_t is an int. Approved by: re (jhb)
2002-11-15 22:36:57 +00:00
printf("%s: suspended %ld.%03ld sec, redo %ld of %d\n",
vp->v_mount->mnt_stat.f_mntonname, (long)endtime.tv_sec,
Minimize the time necessary to suspend operations on a filesystem when taking a snapshot. The two time consuming operations are scanning all the filesystem bitmaps to determine which blocks are in use and scanning all the other snapshots so as to be able to expunge their blocks from the view of the current snapshot. The bitmap scanning is broken into two passes. Before suspending the filesystem all bitmaps are scanned. After the suspension, those bitmaps that changed after being scanned the first time are rescanned. Typically there are few bitmaps that need to be rescanned. The expunging of other snapshots is now done after the suspension is released by observing that we can easily identify any blocks that were allocated to them after the suspension (they will be maked as `not needing to be copied' in the just created snapshot). For all the gory details, see the ``Running fsck in the Background'' paper in the Usenix BSDCon 2002 Conference Proceedings, pages 55-64.
2001-12-14 00:15:06 +00:00
endtime.tv_nsec / 1000000, redo, fs->fs_ncg);
}
This update eliminates a lock-order reversal warning discovered whle tracking down the system hang reported in kern/160662 and corrected in revision 225806. The LOR is not the cause of the system hang and indeed cannot cause an actual deadlock. However, it can be easily eliminated by defering the acquisition of a buflock until after all the vnode locks have been acquired. Reported by: Hans Ottevanger PR: kern/160662
2011-09-27 17:41:48 +00:00
if (copy_fs == NULL)
When taking a snapshot, we must check for active files that have been unlinked (e.g., with a zero link count). We have to expunge all trace of these files from the snapshot so that they are neither reclaimed prematurely by fsck nor saved unnecessarily by dump.
2002-02-02 01:42:44 +00:00
goto out;
/*
* Copy allocation information from all the snapshots in
* this snapshot and then expunge them from its view.
*/
Create struct snapdata which contains the snapshot fields from cdev and the previously malloc'ed snapshot lock. Malloc struct snapdata instead of just the lock. Replace snapshot fields in cdev with pointer to snapdata (saves 16 bytes). While here, give the private readblock() function a vnode argument in preparation for moving UFS to access GEOM directly.
2004-09-13 07:29:45 +00:00
TAILQ_FOREACH(xp, &sn->sn_head, i_nextsnap) {
When taking a snapshot, we must check for active files that have been unlinked (e.g., with a zero link count). We have to expunge all trace of these files from the snapshot so that they are neither reclaimed prematurely by fsck nor saved unnecessarily by dump.
2002-02-02 01:42:44 +00:00
if (xp == ip)
break;
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
if (xp->i_ump->um_fstype == UFS1)
error = expunge_ufs1(vp, xp, fs, snapacct_ufs1,
- Merge soft-updates journaling from projects/suj/head into head. This brings in support for an optional intent log which eliminates the need for background fsck on unclean shutdown. Sponsored by: iXsystems, Yahoo!, and Juniper. With help from: McKusick and Peter Holm
2010-04-24 07:05:35 +00:00
BLK_SNAP, 0);
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
else
error = expunge_ufs2(vp, xp, fs, snapacct_ufs2,
- Merge soft-updates journaling from projects/suj/head into head. This brings in support for an optional intent log which eliminates the need for background fsck on unclean shutdown. Sponsored by: iXsystems, Yahoo!, and Juniper. With help from: McKusick and Peter Holm
2010-04-24 07:05:35 +00:00
BLK_SNAP, 0);
Expunge traces of unlinked snapshot files when making a new snapshot.
2006-05-13 20:41:37 +00:00
if (error == 0 && xp->i_effnlink == 0) {
error = ffs_freefile(ump,
copy_fs,
vp,
xp->i_number,
- Merge soft-updates journaling from projects/suj/head into head. This brings in support for an optional intent log which eliminates the need for background fsck on unclean shutdown. Sponsored by: iXsystems, Yahoo!, and Juniper. With help from: McKusick and Peter Holm
2010-04-24 07:05:35 +00:00
xp->i_mode, NULL);
Expunge traces of unlinked snapshot files when making a new snapshot.
2006-05-13 20:41:37 +00:00
}
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
if (error) {
When taking a snapshot, we must check for active files that have been unlinked (e.g., with a zero link count). We have to expunge all trace of these files from the snapshot so that they are neither reclaimed prematurely by fsck nor saved unnecessarily by dump.
2002-02-02 01:42:44 +00:00
fs->fs_snapinum[snaploc] = 0;
goto done;
Refinement to revision 1.16 of ufs/ffs/ffs_snapshot.c to reduce the amount of time that the filesystem must be suspended. The current snapshot is elided as well as the earlier snapshots.
2001-05-04 05:49:28 +00:00
}
When taking a snapshot, we must check for active files that have been unlinked (e.g., with a zero link count). We have to expunge all trace of these files from the snapshot so that they are neither reclaimed prematurely by fsck nor saved unnecessarily by dump.
2002-02-02 01:42:44 +00:00
}
When creating a snapshot, create a list of initially allocated blocks. Whenever doing a copy-on-write check, first look in the list of initially allocated blocks to see if it is there. If so, no further check is needed. If not, fall through and do the full check. This change eliminates one of two known deadlocks caused by snapshots. Handling the second deadlock will be the subject of another check-in. This change also reduces the cost of the copy-on-write check by speeding up the verification of frequently checked blocks. Sponsored by: DARPA & NAI Labs.
2002-10-09 06:13:48 +00:00
/*
This patch fixes a deadlock between the bufdaemon and a process taking a snapshot. As part of taking a snapshot of a filesystem, the kernel builds up a list of the filesystem metadata (such as the cylinder group bitmaps) that are contained in the snapshot. When doing a copy-on-write check, the list is first consulted. If the block being written is found on the list, then the full snapshot lookup can be avoided. Besides providing an important performance speedup this check also avoids a potential deadlock between the code creating the snapshot and the bufdaemon trying to cleanup snapshot related buffers. This fix creates a temporary list containing the key metadata blocks that can cause the deadlock. This temporary list is used between the time that the snapshot is first enabled and the time that the fully complete list is built. Reported by: Attila Nagy <bra@fsn.hu> Sponsored by: DARPA & NAI Labs.
2003-02-22 00:59:34 +00:00
* Allocate space for the full list of preallocated snapshot blocks.
When creating a snapshot, create a list of initially allocated blocks. Whenever doing a copy-on-write check, first look in the list of initially allocated blocks to see if it is there. If so, no further check is needed. If not, fall through and do the full check. This change eliminates one of two known deadlocks caused by snapshots. Handling the second deadlock will be the subject of another check-in. This change also reduces the cost of the copy-on-write check by speeding up the verification of frequently checked blocks. Sponsored by: DARPA & NAI Labs.
2002-10-09 06:13:48 +00:00
*/
Retire the MALLOC and FREE macros. They are an abomination unto style(9). MFC after: 3 months
2008-10-23 15:53:51 +00:00
snapblklist = malloc(snaplistsize * sizeof(daddr_t),
Back out M_* changes, per decision of the TRB. Approved by: trb
2003-02-19 05:47:46 +00:00
M_UFSMNT, M_WAITOK);
Update to previous change (1.54) to use an approperly wide inode field so as to work correctly on 64-bit platforms. Reported-by: Jake Burkholder <jake@locore.ca> Sponsored by: DARPA & NAI Labs. Approved by: Ian Dowse <iedowse@maths.tcd.ie>
2002-12-15 19:25:59 +00:00
ip->i_snapblklist = &snapblklist[1];
When taking a snapshot, we must check for active files that have been unlinked (e.g., with a zero link count). We have to expunge all trace of these files from the snapshot so that they are neither reclaimed prematurely by fsck nor saved unnecessarily by dump.
2002-02-02 01:42:44 +00:00
/*
* Expunge the blocks used by the snapshots from the set of
When creating a snapshot, create a list of initially allocated blocks. Whenever doing a copy-on-write check, first look in the list of initially allocated blocks to see if it is there. If so, no further check is needed. If not, fall through and do the full check. This change eliminates one of two known deadlocks caused by snapshots. Handling the second deadlock will be the subject of another check-in. This change also reduces the cost of the copy-on-write check by speeding up the verification of frequently checked blocks. Sponsored by: DARPA & NAI Labs.
2002-10-09 06:13:48 +00:00
* blocks marked as used in the snapshot bitmaps. Also, collect
Update to previous change (1.54) to use an approperly wide inode field so as to work correctly on 64-bit platforms. Reported-by: Jake Burkholder <jake@locore.ca> Sponsored by: DARPA & NAI Labs. Approved by: Ian Dowse <iedowse@maths.tcd.ie>
2002-12-15 19:25:59 +00:00
* the list of allocated blocks in i_snapblklist.
When taking a snapshot, we must check for active files that have been unlinked (e.g., with a zero link count). We have to expunge all trace of these files from the snapshot so that they are neither reclaimed prematurely by fsck nor saved unnecessarily by dump.
2002-02-02 01:42:44 +00:00
*/
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
if (ip->i_ump->um_fstype == UFS1)
- Merge soft-updates journaling from projects/suj/head into head. This brings in support for an optional intent log which eliminates the need for background fsck on unclean shutdown. Sponsored by: iXsystems, Yahoo!, and Juniper. With help from: McKusick and Peter Holm
2010-04-24 07:05:35 +00:00
error = expunge_ufs1(vp, ip, copy_fs, mapacct_ufs1,
BLK_SNAP, 0);
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
else
- Merge soft-updates journaling from projects/suj/head into head. This brings in support for an optional intent log which eliminates the need for background fsck on unclean shutdown. Sponsored by: iXsystems, Yahoo!, and Juniper. With help from: McKusick and Peter Holm
2010-04-24 07:05:35 +00:00
error = expunge_ufs2(vp, ip, copy_fs, mapacct_ufs2,
BLK_SNAP, 0);
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
if (error) {
When taking a snapshot, we must check for active files that have been unlinked (e.g., with a zero link count). We have to expunge all trace of these files from the snapshot so that they are neither reclaimed prematurely by fsck nor saved unnecessarily by dump.
2002-02-02 01:42:44 +00:00
fs->fs_snapinum[snaploc] = 0;
Retire the MALLOC and FREE macros. They are an abomination unto style(9). MFC after: 3 months
2008-10-23 15:53:51 +00:00
free(snapblklist, M_UFSMNT);
When taking a snapshot, we must check for active files that have been unlinked (e.g., with a zero link count). We have to expunge all trace of these files from the snapshot so that they are neither reclaimed prematurely by fsck nor saved unnecessarily by dump.
2002-02-02 01:42:44 +00:00
goto done;
}
This patch fixes a deadlock between the bufdaemon and a process taking a snapshot. As part of taking a snapshot of a filesystem, the kernel builds up a list of the filesystem metadata (such as the cylinder group bitmaps) that are contained in the snapshot. When doing a copy-on-write check, the list is first consulted. If the block being written is found on the list, then the full snapshot lookup can be avoided. Besides providing an important performance speedup this check also avoids a potential deadlock between the code creating the snapshot and the bufdaemon trying to cleanup snapshot related buffers. This fix creates a temporary list containing the key metadata blocks that can cause the deadlock. This temporary list is used between the time that the snapshot is first enabled and the time that the fully complete list is built. Reported by: Attila Nagy <bra@fsn.hu> Sponsored by: DARPA & NAI Labs.
2003-02-22 00:59:34 +00:00
if (snaplistsize < ip->i_snapblklist - snapblklist)
panic("ffs_snapshot: list too small");
Update to previous change (1.54) to use an approperly wide inode field so as to work correctly on 64-bit platforms. Reported-by: Jake Burkholder <jake@locore.ca> Sponsored by: DARPA & NAI Labs. Approved by: Ian Dowse <iedowse@maths.tcd.ie>
2002-12-15 19:25:59 +00:00
snaplistsize = ip->i_snapblklist - snapblklist;
Only the most recent snapshot contains the complete list of blocks that were copied in all of the earlier snapshots, thus its precomputed list must be used in the copyonwrite test. Using incomplete lists may lead to deadlock. Also do not include the blocks used for the indirect pointers in the indirect pointers as this may lead to inconsistent snapshots. Sponsored by: DARPA & NAI Labs. Approved by: re
2002-12-14 01:36:59 +00:00
snapblklist[0] = snaplistsize;
Update to previous change (1.54) to use an approperly wide inode field so as to work correctly on 64-bit platforms. Reported-by: Jake Burkholder <jake@locore.ca> Sponsored by: DARPA & NAI Labs. Approved by: Ian Dowse <iedowse@maths.tcd.ie>
2002-12-15 19:25:59 +00:00
ip->i_snapblklist = 0;
When creating a snapshot, create a list of initially allocated blocks. Whenever doing a copy-on-write check, first look in the list of initially allocated blocks to see if it is there. If so, no further check is needed. If not, fall through and do the full check. This change eliminates one of two known deadlocks caused by snapshots. Handling the second deadlock will be the subject of another check-in. This change also reduces the cost of the copy-on-write check by speeding up the verification of frequently checked blocks. Sponsored by: DARPA & NAI Labs.
2002-10-09 06:13:48 +00:00
/*
* Write out the list of allocated blocks to the end of the snapshot.
*/
auio.uio_iov = &aiov;
auio.uio_iovcnt = 1;
Only the most recent snapshot contains the complete list of blocks that were copied in all of the earlier snapshots, thus its precomputed list must be used in the copyonwrite test. Using incomplete lists may lead to deadlock. Also do not include the blocks used for the indirect pointers in the indirect pointers as this may lead to inconsistent snapshots. Sponsored by: DARPA & NAI Labs. Approved by: re
2002-12-14 01:36:59 +00:00
aiov.iov_base = (void *)snapblklist;
aiov.iov_len = snaplistsize * sizeof(daddr_t);
Remove extraneous semicolons, no functional changes. Submitted by: Marc Balmer <marc@msys.ch> MFC after: 1 week
2010-01-07 21:01:37 +00:00
auio.uio_resid = aiov.iov_len;
When creating a snapshot, create a list of initially allocated blocks. Whenever doing a copy-on-write check, first look in the list of initially allocated blocks to see if it is there. If so, no further check is needed. If not, fall through and do the full check. This change eliminates one of two known deadlocks caused by snapshots. Handling the second deadlock will be the subject of another check-in. This change also reduces the cost of the copy-on-write check by speeding up the verification of frequently checked blocks. Sponsored by: DARPA & NAI Labs.
2002-10-09 06:13:48 +00:00
auio.uio_offset = ip->i_size;
auio.uio_segflg = UIO_SYSSPACE;
auio.uio_rw = UIO_WRITE;
auio.uio_td = td;
if ((error = VOP_WRITE(vp, &auio, IO_UNIT, td->td_ucred)) != 0) {
fs->fs_snapinum[snaploc] = 0;
Retire the MALLOC and FREE macros. They are an abomination unto style(9). MFC after: 3 months
2008-10-23 15:53:51 +00:00
free(snapblklist, M_UFSMNT);
When creating a snapshot, create a list of initially allocated blocks. Whenever doing a copy-on-write check, first look in the list of initially allocated blocks to see if it is there. If so, no further check is needed. If not, fall through and do the full check. This change eliminates one of two known deadlocks caused by snapshots. Handling the second deadlock will be the subject of another check-in. This change also reduces the cost of the copy-on-write check by speeding up the verification of frequently checked blocks. Sponsored by: DARPA & NAI Labs.
2002-10-09 06:13:48 +00:00
goto done;
}
When taking a snapshot, we must check for active files that have been unlinked (e.g., with a zero link count). We have to expunge all trace of these files from the snapshot so that they are neither reclaimed prematurely by fsck nor saved unnecessarily by dump.
2002-02-02 01:42:44 +00:00
/*
* Write the superblock and its summary information
* to the snapshot.
*/
blkno = fragstoblks(fs, fs->fs_csaddr);
len = howmany(fs->fs_cssize, fs->fs_bsize);
space = copy_fs->fs_csp;
for (loc = 0; loc < len; loc++) {
error = bread(vp, blkno + loc, fs->fs_bsize, KERNCRED, &nbp);
if (error) {
brelse(nbp);
fs->fs_snapinum[snaploc] = 0;
Retire the MALLOC and FREE macros. They are an abomination unto style(9). MFC after: 3 months
2008-10-23 15:53:51 +00:00
free(snapblklist, M_UFSMNT);
When taking a snapshot, we must check for active files that have been unlinked (e.g., with a zero link count). We have to expunge all trace of these files from the snapshot so that they are neither reclaimed prematurely by fsck nor saved unnecessarily by dump.
2002-02-02 01:42:44 +00:00
goto done;
Refinement to revision 1.16 of ufs/ffs/ffs_snapshot.c to reduce the amount of time that the filesystem must be suspended. The current snapshot is elided as well as the earlier snapshots.
2001-05-04 05:49:28 +00:00
}
When taking a snapshot, we must check for active files that have been unlinked (e.g., with a zero link count). We have to expunge all trace of these files from the snapshot so that they are neither reclaimed prematurely by fsck nor saved unnecessarily by dump.
2002-02-02 01:42:44 +00:00
bcopy(space, nbp->b_data, fs->fs_bsize);
space = (char *)space + fs->fs_bsize;
bawrite(nbp);
Refinement to revision 1.16 of ufs/ffs/ffs_snapshot.c to reduce the amount of time that the filesystem must be suspended. The current snapshot is elided as well as the earlier snapshots.
2001-05-04 05:49:28 +00:00
}
This update eliminates a lock-order reversal warning discovered whle tracking down the system hang reported in kern/160662 and corrected in revision 225806. The LOR is not the cause of the system hang and indeed cannot cause an actual deadlock. However, it can be easily eliminated by defering the acquisition of a buflock until after all the vnode locks have been acquired. Reported by: Hans Ottevanger PR: kern/160662
2011-09-27 17:41:48 +00:00
error = bread(vp, lblkno(fs, fs->fs_sblockloc), fs->fs_bsize,
KERNCRED, &nbp);
if (error) {
brelse(nbp);
} else {
loc = blkoff(fs, fs->fs_sblockloc);
Only copy as much bytes as there in superblock, instead of the full block copy, when copying the superblock into the snapshot. UFS1 does not align superblock on the block boundary, and bcopy runs off the end of the buffer. Reported by: Andre Albsmeier <Andre.Albsmeier@siemens.com> Reviewed by: mckusick Sponsored by: The FreeBSD Foundation MFC after: 1 week
2013-07-12 18:52:33 +00:00
bcopy((char *)copy_fs, &nbp->b_data[loc], (u_int)fs->fs_sbsize);
This update eliminates a lock-order reversal warning discovered whle tracking down the system hang reported in kern/160662 and corrected in revision 225806. The LOR is not the cause of the system hang and indeed cannot cause an actual deadlock. However, it can be easily eliminated by defering the acquisition of a buflock until after all the vnode locks have been acquired. Reported by: Hans Ottevanger PR: kern/160662
2011-09-27 17:41:48 +00:00
bawrite(nbp);
}
Only the most recent snapshot contains the complete list of blocks that were copied in all of the earlier snapshots, thus its precomputed list must be used in the copyonwrite test. Using incomplete lists may lead to deadlock. Also do not include the blocks used for the indirect pointers in the indirect pointers as this may lead to inconsistent snapshots. Sponsored by: DARPA & NAI Labs. Approved by: re
2002-12-14 01:36:59 +00:00
/*
* As this is the newest list, it is the most inclusive, so
* should replace the previous list.
*/
VI_LOCK(devvp);
Create struct snapdata which contains the snapshot fields from cdev and the previously malloc'ed snapshot lock. Malloc struct snapdata instead of just the lock. Replace snapshot fields in cdev with pointer to snapdata (saves 16 bytes). While here, give the private readblock() function a vnode argument in preparation for moving UFS to access GEOM directly.
2004-09-13 07:29:45 +00:00
space = sn->sn_blklist;
sn->sn_blklist = snapblklist;
sn->sn_listsize = snaplistsize;
Call free(9) after the vnode interlock is released, avoiding a lock-order reversal.
2003-11-13 03:56:32 +00:00
VI_UNLOCK(devvp);
This patch fixes a deadlock between the bufdaemon and a process taking a snapshot. As part of taking a snapshot of a filesystem, the kernel builds up a list of the filesystem metadata (such as the cylinder group bitmaps) that are contained in the snapshot. When doing a copy-on-write check, the list is first consulted. If the block being written is found on the list, then the full snapshot lookup can be avoided. Besides providing an important performance speedup this check also avoids a potential deadlock between the code creating the snapshot and the bufdaemon trying to cleanup snapshot related buffers. This fix creates a temporary list containing the key metadata blocks that can cause the deadlock. This temporary list is used between the time that the snapshot is first enabled and the time that the fully complete list is built. Reported by: Attila Nagy <bra@fsn.hu> Sponsored by: DARPA & NAI Labs.
2003-02-22 00:59:34 +00:00
if (space != NULL)
Retire the MALLOC and FREE macros. They are an abomination unto style(9). MFC after: 3 months
2008-10-23 15:53:51 +00:00
free(space, M_UFSMNT);
Reduce probability for a deadlock that can occur when a snapshot inode is updated by a process holding the snapshot lock. Another process updating a different inode in the same inodeblock will do copy on write checks and lock in the opposite direction. The snapshot code force a copy on write of these blocks manually (cf. start of expunge_ufs[12]) and these inode blocks are later put on snapblklist. This partial fix is to 'drain' the relevant ffs_copyonwrite() operation after installing new snapblklist. This is not a 100% solution since a failed block allocation can cause implicit fsync() which might deadlock before the new snapblklist has been installed.
2005-10-09 20:15:15 +00:00
/*
This change avoids a kernel deadlock on "snaplk" when using snapshots on UFS filesystems running with journaled soft updates. This is the first of several bugs that need to be fixed before removing the restriction added in -r230250 to prevent the use of snapshots on filesystems running with journaled soft updates. The deadlock occurs when holding the snapshot lock (snaplk) and then trying to flush an inode via ffs_update(). We become blocked by another process trying to flush a different inode contained in the same inode block that we need. It holds the inode block for which we are waiting locked. When it tries to write the inode block, it gets blocked waiting for the our snaplk when it calls ffs_copyonwrite() to see if the inode block needs to be copied in our snapshot. The most obvious place that this deadlock arises is in the ffs_copyonwrite() routine when it updates critical metadata in a snapshot and tries to write it out before proceeding. The fix here is to write the data and indirect block pointer for the snapshot, but to skip the call to ffs_update() to write the snapshot inode. To ensure that we will never have to update a pointer in the inode itself, the ffs_snapshot() routine that creates the snapshot has to ensure that all the direct blocks are allocated as part of the creation of the snapshot. A less obvious place that this deadlock occurs is when we hold the snaplk because we are deleting a snapshot. In the course of doing the deletion, we need to allocate various soft update dependency structures and allocate some journal space. If we hit a resource limit while doing this we decrease the resources in use by flushing out an existing dirty file to get it to give up the soft dependency resources that it holds. The flush can cause an ffs_update() to be done on the inode for the file that we have selected to flush resulting in the same deadlock as described above when the inode that we have chosen to flush resides in the same inode block as the snapshot inode that we hold. The fix is to defer cleaning up any time that the inode on which we are operating is a snapshot. Help and review by: Jeff Roberson Tested by: Peter Holm MFC (to 9 only) after: 2 weeks
2012-03-01 18:45:25 +00:00
* Preallocate all the direct blocks in the snapshot inode so
* that we never have to write the inode itself to commit an
* update to the contents of the snapshot. Note that once
* created, the size of the snapshot will never change, so
* there will never be a need to write the inode except to
* update the non-integrity-critical time fields and
* allocated-block count.
Reduce probability for a deadlock that can occur when a snapshot inode is updated by a process holding the snapshot lock. Another process updating a different inode in the same inodeblock will do copy on write checks and lock in the opposite direction. The snapshot code force a copy on write of these blocks manually (cf. start of expunge_ufs[12]) and these inode blocks are later put on snapblklist. This partial fix is to 'drain' the relevant ffs_copyonwrite() operation after installing new snapblklist. This is not a 100% solution since a failed block allocation can cause implicit fsync() which might deadlock before the new snapblklist has been installed.
2005-10-09 20:15:15 +00:00
*/
This change avoids a kernel deadlock on "snaplk" when using snapshots on UFS filesystems running with journaled soft updates. This is the first of several bugs that need to be fixed before removing the restriction added in -r230250 to prevent the use of snapshots on filesystems running with journaled soft updates. The deadlock occurs when holding the snapshot lock (snaplk) and then trying to flush an inode via ffs_update(). We become blocked by another process trying to flush a different inode contained in the same inode block that we need. It holds the inode block for which we are waiting locked. When it tries to write the inode block, it gets blocked waiting for the our snaplk when it calls ffs_copyonwrite() to see if the inode block needs to be copied in our snapshot. The most obvious place that this deadlock arises is in the ffs_copyonwrite() routine when it updates critical metadata in a snapshot and tries to write it out before proceeding. The fix here is to write the data and indirect block pointer for the snapshot, but to skip the call to ffs_update() to write the snapshot inode. To ensure that we will never have to update a pointer in the inode itself, the ffs_snapshot() routine that creates the snapshot has to ensure that all the direct blocks are allocated as part of the creation of the snapshot. A less obvious place that this deadlock occurs is when we hold the snaplk because we are deleting a snapshot. In the course of doing the deletion, we need to allocate various soft update dependency structures and allocate some journal space. If we hit a resource limit while doing this we decrease the resources in use by flushing out an existing dirty file to get it to give up the soft dependency resources that it holds. The flush can cause an ffs_update() to be done on the inode for the file that we have selected to flush resulting in the same deadlock as described above when the inode that we have chosen to flush resides in the same inode block as the snapshot inode that we hold. The fix is to defer cleaning up any time that the inode on which we are operating is a snapshot. Help and review by: Jeff Roberson Tested by: Peter Holm MFC (to 9 only) after: 2 weeks
2012-03-01 18:45:25 +00:00
for (blockno = 0; blockno < NDADDR; blockno++) {
if (DIP(ip, i_db[blockno]) != 0)
continue;
error = UFS_BALLOC(vp, lblktosize(fs, blockno),
fs->fs_bsize, KERNCRED, BA_CLRBUF, &bp);
if (error)
break;
error = readblock(vp, bp, blockno);
bawrite(bp);
if (error != 0)
break;
}
When taking a snapshot, we must check for active files that have been unlinked (e.g., with a zero link count). We have to expunge all trace of these files from the snapshot so that they are neither reclaimed prematurely by fsck nor saved unnecessarily by dump.
2002-02-02 01:42:44 +00:00
done:
Retire the MALLOC and FREE macros. They are an abomination unto style(9). MFC after: 3 months
2008-10-23 15:53:51 +00:00
free(copy_fs->fs_csp, M_UFSMNT);
This update eliminates a lock-order reversal warning discovered whle tracking down the system hang reported in kern/160662 and corrected in revision 225806. The LOR is not the cause of the system hang and indeed cannot cause an actual deadlock. However, it can be easily eliminated by defering the acquisition of a buflock until after all the vnode locks have been acquired. Reported by: Hans Ottevanger PR: kern/160662
2011-09-27 17:41:48 +00:00
free(copy_fs, M_UFSMNT);
copy_fs = NULL;
Add snapshots to the fast filesystem. Most of the changes support the gating of system calls that cause modifications to the underlying filesystem. The gating can be enabled by any filesystem that needs to consistently suspend operations by adding the vop_stdgetwritemount to their set of vnops. Once gating is enabled, the function vfs_write_suspend stops all new write operations to a filesystem, allows any filesystem modifying system calls already in progress to complete, then sync's the filesystem to disk and returns. The function vfs_write_resume allows the suspended write operations to begin again. Gating is not added by default for all filesystems as for SMP systems it adds two extra locks to such critical kernel paths as the write system call. Thus, gating should only be added as needed. Details on the use and current status of snapshots in FFS can be found in /sys/ufs/ffs/README.snapshot so for brevity and timelyness is not included here. Unless and until you create a snapshot file, these changes should have no effect on your system (famous last words).
2000-07-11 22:07:57 +00:00
out:
Fix the NAMEI zone leak when snapshot was successfully created. Reported and tested by: Peter Holm MFC after: 2 weeks
2007-04-10 09:31:42 +00:00
NDFREE(&nd, NDF_ONLY_PNBUF);
Lock both the proc lock and sched_lock when calling sched_nice since kg_nice is now protected by both. Being protected by both means that other places in the kernel that want to read kg_nice only need one of the two locks.
2003-04-22 20:45:38 +00:00
if (saved_nice > 0) {
Commit 14/14 of sched_lock decomposition. - Use thread_lock() rather than sched_lock for per-thread scheduling sychronization. - Use the per-process spinlock rather than the sched_lock for per-process scheduling synchronization. Tested by: kris, current@ Tested on: i386, amd64, ULE, 4BSD, libthr, libkse, PREEMPTION, etc. Discussed with: kris, attilio, kmacy, jhb, julian, bde (small parts each)
2007-06-05 00:00:57 +00:00
struct proc *p;
p = td->td_proc;
PROC_LOCK(p);
Nice, is a property of a process as a whole.. I mistakenly moved it to the ksegroup when breaking up the process structure. Put it back in the proc structure.
2004-06-16 00:26:31 +00:00
sched_nice(td->td_proc, saved_nice);
Lock both the proc lock and sched_lock when calling sched_nice since kg_nice is now protected by both. Being protected by both means that other places in the kernel that want to read kg_nice only need one of the two locks.
2003-04-22 20:45:38 +00:00
PROC_UNLOCK(td->td_proc);
}
- Use the ufs lock to protect fs_active. Sponsored By: Isilon Systems, Inc.
2005-01-24 10:10:11 +00:00
UFS_LOCK(ump);
Minimize the time necessary to suspend operations on a filesystem when taking a snapshot. The two time consuming operations are scanning all the filesystem bitmaps to determine which blocks are in use and scanning all the other snapshots so as to be able to expunge their blocks from the view of the current snapshot. The bitmap scanning is broken into two passes. Before suspending the filesystem all bitmaps are scanned. After the suspension, those bitmaps that changed after being scanned the first time are rescanned. Typically there are few bitmaps that need to be rescanned. The expunging of other snapshots is now done after the suspension is released by observing that we can easily identify any blocks that were allocated to them after the suspension (they will be maked as `not needing to be copied' in the just created snapshot). For all the gory details, see the ``Running fsck in the Background'' paper in the Usenix BSDCon 2002 Conference Proceedings, pages 55-64.
2001-12-14 00:15:06 +00:00
if (fs->fs_active != 0) {
Retire the MALLOC and FREE macros. They are an abomination unto style(9). MFC after: 3 months
2008-10-23 15:53:51 +00:00
free(fs->fs_active, M_DEVBUF);
Minimize the time necessary to suspend operations on a filesystem when taking a snapshot. The two time consuming operations are scanning all the filesystem bitmaps to determine which blocks are in use and scanning all the other snapshots so as to be able to expunge their blocks from the view of the current snapshot. The bitmap scanning is broken into two passes. Before suspending the filesystem all bitmaps are scanned. After the suspension, those bitmaps that changed after being scanned the first time are rescanned. Typically there are few bitmaps that need to be rescanned. The expunging of other snapshots is now done after the suspension is released by observing that we can easily identify any blocks that were allocated to them after the suspension (they will be maked as `not needing to be copied' in the just created snapshot). For all the gory details, see the ``Running fsck in the Background'' paper in the Usenix BSDCon 2002 Conference Proceedings, pages 55-64.
2001-12-14 00:15:06 +00:00
fs->fs_active = 0;
}
- Use the ufs lock to protect fs_active. Sponsored By: Isilon Systems, Inc.
2005-01-24 10:10:11 +00:00
UFS_UNLOCK(ump);
Use mount interlock to protect all changes to mnt_flag and mnt_kern_flag. This eliminates a race where MNT_UPDATE flag could be lost when nmount() raced against sync(), sync_fsync() or quotactl().
2006-09-26 04:12:49 +00:00
MNT_ILOCK(mp);
Don't restore MNT_QUOTA bit in mnt_flag after snapshot creation, closing a race between nmount() and quotactl().
2006-09-26 04:19:11 +00:00
mp->mnt_flag = (mp->mnt_flag & MNT_QUOTA) | (flag & ~MNT_QUOTA);
Use mount interlock to protect all changes to mnt_flag and mnt_kern_flag. This eliminates a race where MNT_UPDATE flag could be lost when nmount() raced against sync(), sync_fsync() or quotactl().
2006-09-26 04:12:49 +00:00
MNT_IUNLOCK(mp);
Refinement to revision 1.16 of ufs/ffs/ffs_snapshot.c to reduce the amount of time that the filesystem must be suspended. The current snapshot is elided as well as the earlier snapshots.
2001-05-04 05:49:28 +00:00
if (error)
Remove unused thread argument from vtruncbuf(). Reviewed by: kib
2012-04-23 13:21:28 +00:00
(void) ffs_truncate(vp, (off_t)0, 0, NOCRED);
Add a third flags argument to ffs_syncvnode to avoid a possible conflict with MNT_WAIT flags that passed in its second argument. This will be MFC'ed together with r232351. Discussed with: kib
2012-03-25 00:02:37 +00:00
(void) ffs_syncvnode(vp, MNT_WAIT, 0);
Add snapshots to the fast filesystem. Most of the changes support the gating of system calls that cause modifications to the underlying filesystem. The gating can be enabled by any filesystem that needs to consistently suspend operations by adding the vop_stdgetwritemount to their set of vnops. Once gating is enabled, the function vfs_write_suspend stops all new write operations to a filesystem, allows any filesystem modifying system calls already in progress to complete, then sync's the filesystem to disk and returns. The function vfs_write_resume allows the suspended write operations to begin again. Gating is not added by default for all filesystems as for SMP systems it adds two extra locks to such critical kernel paths as the write system call. Thus, gating should only be added as needed. Details on the use and current status of snapshots in FFS can be found in /sys/ufs/ffs/README.snapshot so for brevity and timelyness is not included here. Unless and until you create a snapshot file, these changes should have no effect on your system (famous last words).
2000-07-11 22:07:57 +00:00
if (error)
vput(vp);
else
VOP_LOCK1() (and so VOP_LOCK()) and VOP_UNLOCK() are only used in conjuction with 'thread' argument passing which is always curthread. Remove the unuseful extra-argument and pass explicitly curthread to lower layer functions, when necessary. KPI results broken by this change, which should affect several ports, so version bumping and manpage update will be further committed. Tested by: kris, pho, Diego Sardina <siarodx at gmail dot com>
2008-01-13 14:44:15 +00:00
VOP_UNLOCK(vp, 0);
Ensure that vnode for directory isn't reclaimed before ffs_snapshot() has completed expunging unlinked files. It could come back at another memory location causing a lock order reversal.
2006-03-19 21:05:10 +00:00
vrele(nd.ni_dvp);
Add snapshots to the fast filesystem. Most of the changes support the gating of system calls that cause modifications to the underlying filesystem. The gating can be enabled by any filesystem that needs to consistently suspend operations by adding the vop_stdgetwritemount to their set of vnops. Once gating is enabled, the function vfs_write_suspend stops all new write operations to a filesystem, allows any filesystem modifying system calls already in progress to complete, then sync's the filesystem to disk and returns. The function vfs_write_resume allows the suspended write operations to begin again. Gating is not added by default for all filesystems as for SMP systems it adds two extra locks to such critical kernel paths as the write system call. Thus, gating should only be added as needed. Details on the use and current status of snapshots in FFS can be found in /sys/ufs/ffs/README.snapshot so for brevity and timelyness is not included here. Unless and until you create a snapshot file, these changes should have no effect on your system (famous last words).
2000-07-11 22:07:57 +00:00
vn_finished_write(wrtmp);
Block secondary writes while expunging active unlinked files. Fix detection of active unlinked files by checking VI_OWEINACT and VI_DOINGINACT in addition to v_usecount. Defer inactive handling for unlinked files if the file system is mostly suspended (secondary writes being blocked). Perform deferred inactive handling after the file system is resumed.
2006-03-11 01:08:37 +00:00
process_deferred_inactive(mp);
Add snapshots to the fast filesystem. Most of the changes support the gating of system calls that cause modifications to the underlying filesystem. The gating can be enabled by any filesystem that needs to consistently suspend operations by adding the vop_stdgetwritemount to their set of vnops. Once gating is enabled, the function vfs_write_suspend stops all new write operations to a filesystem, allows any filesystem modifying system calls already in progress to complete, then sync's the filesystem to disk and returns. The function vfs_write_resume allows the suspended write operations to begin again. Gating is not added by default for all filesystems as for SMP systems it adds two extra locks to such critical kernel paths as the write system call. Thus, gating should only be added as needed. Details on the use and current status of snapshots in FFS can be found in /sys/ufs/ffs/README.snapshot so for brevity and timelyness is not included here. Unless and until you create a snapshot file, these changes should have no effect on your system (famous last words).
2000-07-11 22:07:57 +00:00
return (error);
}
Minimize the time necessary to suspend operations on a filesystem when taking a snapshot. The two time consuming operations are scanning all the filesystem bitmaps to determine which blocks are in use and scanning all the other snapshots so as to be able to expunge their blocks from the view of the current snapshot. The bitmap scanning is broken into two passes. Before suspending the filesystem all bitmaps are scanned. After the suspension, those bitmaps that changed after being scanned the first time are rescanned. Typically there are few bitmaps that need to be rescanned. The expunging of other snapshots is now done after the suspension is released by observing that we can easily identify any blocks that were allocated to them after the suspension (they will be maked as `not needing to be copied' in the just created snapshot). For all the gory details, see the ``Running fsck in the Background'' paper in the Usenix BSDCon 2002 Conference Proceedings, pages 55-64.
2001-12-14 00:15:06 +00:00
/*
* Copy a cylinder group map. All the unallocated blocks are marked
* BLK_NOCOPY so that the snapshot knows that it need not copy them
Introduce the new 64-bit size disk block, daddr64_t. Change the bio and buffer structures to have daddr64_t bio_pblkno, b_blkno, and b_lblkno fields which allows access to disks larger than a Terabyte in size. This change also requires that the VOP_BMAP vnode operation accept and return daddr64_t blocks. This delta should not affect system operation in any way. It merely sets up the necessary interfaces to allow the development of disk drivers that work with these larger disk block addresses. It also allows for the development of UFS2 which will use 64-bit block addresses.
2002-03-15 18:49:47 +00:00
* if they are later written. If passno is one, then this is a first
* pass, so only setting needs to be done. If passno is 2, then this
Minimize the time necessary to suspend operations on a filesystem when taking a snapshot. The two time consuming operations are scanning all the filesystem bitmaps to determine which blocks are in use and scanning all the other snapshots so as to be able to expunge their blocks from the view of the current snapshot. The bitmap scanning is broken into two passes. Before suspending the filesystem all bitmaps are scanned. After the suspension, those bitmaps that changed after being scanned the first time are rescanned. Typically there are few bitmaps that need to be rescanned. The expunging of other snapshots is now done after the suspension is released by observing that we can easily identify any blocks that were allocated to them after the suspension (they will be maked as `not needing to be copied' in the just created snapshot). For all the gory details, see the ``Running fsck in the Background'' paper in the Usenix BSDCon 2002 Conference Proceedings, pages 55-64.
2001-12-14 00:15:06 +00:00
* is a revision to a previous pass which must be undone as the
* replacement pass is done.
*/
static int
cgaccount(cg, vp, nbp, passno)
int cg;
struct vnode *vp;
struct buf *nbp;
int passno;
{
struct buf *bp, *ibp;
struct inode *ip;
struct cg *cgp;
struct fs *fs;
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
ufs2_daddr_t base, numblks;
int error, len, loc, indiroff;
Minimize the time necessary to suspend operations on a filesystem when taking a snapshot. The two time consuming operations are scanning all the filesystem bitmaps to determine which blocks are in use and scanning all the other snapshots so as to be able to expunge their blocks from the view of the current snapshot. The bitmap scanning is broken into two passes. Before suspending the filesystem all bitmaps are scanned. After the suspension, those bitmaps that changed after being scanned the first time are rescanned. Typically there are few bitmaps that need to be rescanned. The expunging of other snapshots is now done after the suspension is released by observing that we can easily identify any blocks that were allocated to them after the suspension (they will be maked as `not needing to be copied' in the just created snapshot). For all the gory details, see the ``Running fsck in the Background'' paper in the Usenix BSDCon 2002 Conference Proceedings, pages 55-64.
2001-12-14 00:15:06 +00:00
ip = VTOI(vp);
fs = ip->i_fs;
error = bread(ip->i_devvp, fsbtodb(fs, cgtod(fs, cg)),
(int)fs->fs_cgsize, KERNCRED, &bp);
if (error) {
brelse(bp);
return (error);
}
cgp = (struct cg *)bp->b_data;
if (!cg_chkmagic(cgp)) {
brelse(bp);
return (EIO);
}
- Use the ufs lock to protect fs_active. Sponsored By: Isilon Systems, Inc.
2005-01-24 10:10:11 +00:00
UFS_LOCK(ip->i_ump);
- Fix anoter dyslexic moment; an atomic_set_int should've become ACTIVESET, not ACTIVECLEAR. Submitted by: iedowse
2005-03-01 07:38:45 +00:00
ACTIVESET(fs, cg);
Sync up summary information for cylinder groups while data is already in memory during snapshot creation. This improves the results of the background fsck. Submitted by: tegge MFC after: 1 week
2008-10-13 14:05:01 +00:00
/*
* Recomputation of summary information might not have been performed
* at mount time. Sync up summary information for current cylinder
* group while data is in memory to ensure that result of background
* fsck is slightly more consistent.
*/
fs->fs_cs(fs, cg) = cgp->cg_cs;
- Use the ufs lock to protect fs_active. Sponsored By: Isilon Systems, Inc.
2005-01-24 10:10:11 +00:00
UFS_UNLOCK(ip->i_ump);
Minimize the time necessary to suspend operations on a filesystem when taking a snapshot. The two time consuming operations are scanning all the filesystem bitmaps to determine which blocks are in use and scanning all the other snapshots so as to be able to expunge their blocks from the view of the current snapshot. The bitmap scanning is broken into two passes. Before suspending the filesystem all bitmaps are scanned. After the suspension, those bitmaps that changed after being scanned the first time are rescanned. Typically there are few bitmaps that need to be rescanned. The expunging of other snapshots is now done after the suspension is released by observing that we can easily identify any blocks that were allocated to them after the suspension (they will be maked as `not needing to be copied' in the just created snapshot). For all the gory details, see the ``Running fsck in the Background'' paper in the Usenix BSDCon 2002 Conference Proceedings, pages 55-64.
2001-12-14 00:15:06 +00:00
bcopy(bp->b_data, nbp->b_data, fs->fs_cgsize);
if (fs->fs_cgsize < fs->fs_bsize)
bzero(&nbp->b_data[fs->fs_cgsize],
fs->fs_bsize - fs->fs_cgsize);
Eliminate a deadlock that can occur during the cgaccount() processing due to the cg map buffer being held when writing indirect blocks. The process ends up in ffs_copyonwrite(), attempting to get snaplk while holding the cg map buffer lock. Another process might be in ffs_copyonwrite(), trying to allocate a new block for a copy. It would hold snaplk while trying to get the cg map buffer lock. Release the cg map buffer early and use the copy for most of the cgaccount processing to avoid this deadlock.
2005-10-09 20:00:16 +00:00
cgp = (struct cg *)nbp->b_data;
bqrelse(bp);
Minimize the time necessary to suspend operations on a filesystem when taking a snapshot. The two time consuming operations are scanning all the filesystem bitmaps to determine which blocks are in use and scanning all the other snapshots so as to be able to expunge their blocks from the view of the current snapshot. The bitmap scanning is broken into two passes. Before suspending the filesystem all bitmaps are scanned. After the suspension, those bitmaps that changed after being scanned the first time are rescanned. Typically there are few bitmaps that need to be rescanned. The expunging of other snapshots is now done after the suspension is released by observing that we can easily identify any blocks that were allocated to them after the suspension (they will be maked as `not needing to be copied' in the just created snapshot). For all the gory details, see the ``Running fsck in the Background'' paper in the Usenix BSDCon 2002 Conference Proceedings, pages 55-64.
2001-12-14 00:15:06 +00:00
if (passno == 2)
nbp->b_flags |= B_VALIDSUSPWRT;
numblks = howmany(fs->fs_size, fs->fs_frag);
len = howmany(fs->fs_fpg, fs->fs_frag);
Fixes a bug that caused UFS2 filesystems bigger than 2TB to prematurely report that they were full and/or to panic the kernel with the message ``ffs_clusteralloc: allocated out of group''. Submitted by: Henry Whincup <henry@jot.to> MFC after: 1 week
2004-12-09 21:24:00 +00:00
base = cgbase(fs, cg) / fs->fs_frag;
Minimize the time necessary to suspend operations on a filesystem when taking a snapshot. The two time consuming operations are scanning all the filesystem bitmaps to determine which blocks are in use and scanning all the other snapshots so as to be able to expunge their blocks from the view of the current snapshot. The bitmap scanning is broken into two passes. Before suspending the filesystem all bitmaps are scanned. After the suspension, those bitmaps that changed after being scanned the first time are rescanned. Typically there are few bitmaps that need to be rescanned. The expunging of other snapshots is now done after the suspension is released by observing that we can easily identify any blocks that were allocated to them after the suspension (they will be maked as `not needing to be copied' in the just created snapshot). For all the gory details, see the ``Running fsck in the Background'' paper in the Usenix BSDCon 2002 Conference Proceedings, pages 55-64.
2001-12-14 00:15:06 +00:00
if (base + len >= numblks)
len = numblks - base - 1;
loc = 0;
if (base < NDADDR) {
for ( ; loc < NDADDR; loc++) {
if (ffs_isblock(fs, cg_blksfree(cgp), loc))
Avoid using casts as lvalues. Introduce DIP_SET macro which sets proper inode field based on UFS version. Use DIP ro read values and DIP_SET to modify them throughout FFS code base.
2004-07-28 06:41:27 +00:00
DIP_SET(ip, i_db[loc], BLK_NOCOPY);
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
else if (passno == 2 && DIP(ip, i_db[loc])== BLK_NOCOPY)
Avoid using casts as lvalues. Introduce DIP_SET macro which sets proper inode field based on UFS version. Use DIP ro read values and DIP_SET to modify them throughout FFS code base.
2004-07-28 06:41:27 +00:00
DIP_SET(ip, i_db[loc], 0);
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
else if (passno == 1 && DIP(ip, i_db[loc])== BLK_NOCOPY)
Minimize the time necessary to suspend operations on a filesystem when taking a snapshot. The two time consuming operations are scanning all the filesystem bitmaps to determine which blocks are in use and scanning all the other snapshots so as to be able to expunge their blocks from the view of the current snapshot. The bitmap scanning is broken into two passes. Before suspending the filesystem all bitmaps are scanned. After the suspension, those bitmaps that changed after being scanned the first time are rescanned. Typically there are few bitmaps that need to be rescanned. The expunging of other snapshots is now done after the suspension is released by observing that we can easily identify any blocks that were allocated to them after the suspension (they will be maked as `not needing to be copied' in the just created snapshot). For all the gory details, see the ``Running fsck in the Background'' paper in the Usenix BSDCon 2002 Conference Proceedings, pages 55-64.
2001-12-14 00:15:06 +00:00
panic("ffs_snapshot: lost direct block");
}
}
error = UFS_BALLOC(vp, lblktosize(fs, (off_t)(base + loc)),
Rename the BALLOC flags from B_* to BA_* to avoid confusion with the struct buf B_ flags. Approved by: mckusick
2002-06-23 06:12:22 +00:00
fs->fs_bsize, KERNCRED, BA_METAONLY, &ibp);
Minimize the time necessary to suspend operations on a filesystem when taking a snapshot. The two time consuming operations are scanning all the filesystem bitmaps to determine which blocks are in use and scanning all the other snapshots so as to be able to expunge their blocks from the view of the current snapshot. The bitmap scanning is broken into two passes. Before suspending the filesystem all bitmaps are scanned. After the suspension, those bitmaps that changed after being scanned the first time are rescanned. Typically there are few bitmaps that need to be rescanned. The expunging of other snapshots is now done after the suspension is released by observing that we can easily identify any blocks that were allocated to them after the suspension (they will be maked as `not needing to be copied' in the just created snapshot). For all the gory details, see the ``Running fsck in the Background'' paper in the Usenix BSDCon 2002 Conference Proceedings, pages 55-64.
2001-12-14 00:15:06 +00:00
if (error) {
return (error);
}
indiroff = (base + loc - NDADDR) % NINDIR(fs);
for ( ; loc < len; loc++, indiroff++) {
if (indiroff >= NINDIR(fs)) {
if (passno == 2)
ibp->b_flags |= B_VALIDSUSPWRT;
bawrite(ibp);
error = UFS_BALLOC(vp,
lblktosize(fs, (off_t)(base + loc)),
Rename the BALLOC flags from B_* to BA_* to avoid confusion with the struct buf B_ flags. Approved by: mckusick
2002-06-23 06:12:22 +00:00
fs->fs_bsize, KERNCRED, BA_METAONLY, &ibp);
Minimize the time necessary to suspend operations on a filesystem when taking a snapshot. The two time consuming operations are scanning all the filesystem bitmaps to determine which blocks are in use and scanning all the other snapshots so as to be able to expunge their blocks from the view of the current snapshot. The bitmap scanning is broken into two passes. Before suspending the filesystem all bitmaps are scanned. After the suspension, those bitmaps that changed after being scanned the first time are rescanned. Typically there are few bitmaps that need to be rescanned. The expunging of other snapshots is now done after the suspension is released by observing that we can easily identify any blocks that were allocated to them after the suspension (they will be maked as `not needing to be copied' in the just created snapshot). For all the gory details, see the ``Running fsck in the Background'' paper in the Usenix BSDCon 2002 Conference Proceedings, pages 55-64.
2001-12-14 00:15:06 +00:00
if (error) {
return (error);
}
indiroff = 0;
}
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
if (ip->i_ump->um_fstype == UFS1) {
if (ffs_isblock(fs, cg_blksfree(cgp), loc))
((ufs1_daddr_t *)(ibp->b_data))[indiroff] =
BLK_NOCOPY;
else if (passno == 2 && ((ufs1_daddr_t *)(ibp->b_data))
[indiroff] == BLK_NOCOPY)
((ufs1_daddr_t *)(ibp->b_data))[indiroff] = 0;
else if (passno == 1 && ((ufs1_daddr_t *)(ibp->b_data))
[indiroff] == BLK_NOCOPY)
panic("ffs_snapshot: lost indirect block");
continue;
}
Minimize the time necessary to suspend operations on a filesystem when taking a snapshot. The two time consuming operations are scanning all the filesystem bitmaps to determine which blocks are in use and scanning all the other snapshots so as to be able to expunge their blocks from the view of the current snapshot. The bitmap scanning is broken into two passes. Before suspending the filesystem all bitmaps are scanned. After the suspension, those bitmaps that changed after being scanned the first time are rescanned. Typically there are few bitmaps that need to be rescanned. The expunging of other snapshots is now done after the suspension is released by observing that we can easily identify any blocks that were allocated to them after the suspension (they will be maked as `not needing to be copied' in the just created snapshot). For all the gory details, see the ``Running fsck in the Background'' paper in the Usenix BSDCon 2002 Conference Proceedings, pages 55-64.
2001-12-14 00:15:06 +00:00
if (ffs_isblock(fs, cg_blksfree(cgp), loc))
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
((ufs2_daddr_t *)(ibp->b_data))[indiroff] = BLK_NOCOPY;
Minimize the time necessary to suspend operations on a filesystem when taking a snapshot. The two time consuming operations are scanning all the filesystem bitmaps to determine which blocks are in use and scanning all the other snapshots so as to be able to expunge their blocks from the view of the current snapshot. The bitmap scanning is broken into two passes. Before suspending the filesystem all bitmaps are scanned. After the suspension, those bitmaps that changed after being scanned the first time are rescanned. Typically there are few bitmaps that need to be rescanned. The expunging of other snapshots is now done after the suspension is released by observing that we can easily identify any blocks that were allocated to them after the suspension (they will be maked as `not needing to be copied' in the just created snapshot). For all the gory details, see the ``Running fsck in the Background'' paper in the Usenix BSDCon 2002 Conference Proceedings, pages 55-64.
2001-12-14 00:15:06 +00:00
else if (passno == 2 &&
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
((ufs2_daddr_t *)(ibp->b_data)) [indiroff] == BLK_NOCOPY)
((ufs2_daddr_t *)(ibp->b_data))[indiroff] = 0;
Minimize the time necessary to suspend operations on a filesystem when taking a snapshot. The two time consuming operations are scanning all the filesystem bitmaps to determine which blocks are in use and scanning all the other snapshots so as to be able to expunge their blocks from the view of the current snapshot. The bitmap scanning is broken into two passes. Before suspending the filesystem all bitmaps are scanned. After the suspension, those bitmaps that changed after being scanned the first time are rescanned. Typically there are few bitmaps that need to be rescanned. The expunging of other snapshots is now done after the suspension is released by observing that we can easily identify any blocks that were allocated to them after the suspension (they will be maked as `not needing to be copied' in the just created snapshot). For all the gory details, see the ``Running fsck in the Background'' paper in the Usenix BSDCon 2002 Conference Proceedings, pages 55-64.
2001-12-14 00:15:06 +00:00
else if (passno == 1 &&
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
((ufs2_daddr_t *)(ibp->b_data)) [indiroff] == BLK_NOCOPY)
Minimize the time necessary to suspend operations on a filesystem when taking a snapshot. The two time consuming operations are scanning all the filesystem bitmaps to determine which blocks are in use and scanning all the other snapshots so as to be able to expunge their blocks from the view of the current snapshot. The bitmap scanning is broken into two passes. Before suspending the filesystem all bitmaps are scanned. After the suspension, those bitmaps that changed after being scanned the first time are rescanned. Typically there are few bitmaps that need to be rescanned. The expunging of other snapshots is now done after the suspension is released by observing that we can easily identify any blocks that were allocated to them after the suspension (they will be maked as `not needing to be copied' in the just created snapshot). For all the gory details, see the ``Running fsck in the Background'' paper in the Usenix BSDCon 2002 Conference Proceedings, pages 55-64.
2001-12-14 00:15:06 +00:00
panic("ffs_snapshot: lost indirect block");
}
if (passno == 2)
ibp->b_flags |= B_VALIDSUSPWRT;
bdwrite(ibp);
return (0);
}
Refinement to revision 1.16 of ufs/ffs/ffs_snapshot.c to reduce the amount of time that the filesystem must be suspended. The current snapshot is elided as well as the earlier snapshots.
2001-05-04 05:49:28 +00:00
/*
* Before expunging a snapshot inode, note all the
* blocks that it claims with BLK_SNAP so that fsck will
* be able to account for those blocks properly and so
* that this snapshot knows that it need not copy them
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
* if the other snapshot holding them is freed. This code
* is reproduced once each for UFS1 and UFS2.
Refinement to revision 1.16 of ufs/ffs/ffs_snapshot.c to reduce the amount of time that the filesystem must be suspended. The current snapshot is elided as well as the earlier snapshots.
2001-05-04 05:49:28 +00:00
*/
static int
- Merge soft-updates journaling from projects/suj/head into head. This brings in support for an optional intent log which eliminates the need for background fsck on unclean shutdown. Sponsored by: iXsystems, Yahoo!, and Juniper. With help from: McKusick and Peter Holm
2010-04-24 07:05:35 +00:00
expunge_ufs1(snapvp, cancelip, fs, acctfunc, expungetype, clearmode)
When taking a snapshot, we must check for active files that have been unlinked (e.g., with a zero link count). We have to expunge all trace of these files from the snapshot so that they are neither reclaimed prematurely by fsck nor saved unnecessarily by dump.
2002-02-02 01:42:44 +00:00
struct vnode *snapvp;
struct inode *cancelip;
Refinement to revision 1.16 of ufs/ffs/ffs_snapshot.c to reduce the amount of time that the filesystem must be suspended. The current snapshot is elided as well as the earlier snapshots.
2001-05-04 05:49:28 +00:00
struct fs *fs;
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
int (*acctfunc)(struct vnode *, ufs1_daddr_t *, ufs1_daddr_t *,
struct fs *, ufs_lbn_t, int);
When taking a snapshot, we must check for active files that have been unlinked (e.g., with a zero link count). We have to expunge all trace of these files from the snapshot so that they are neither reclaimed prematurely by fsck nor saved unnecessarily by dump.
2002-02-02 01:42:44 +00:00
int expungetype;
- Merge soft-updates journaling from projects/suj/head into head. This brings in support for an optional intent log which eliminates the need for background fsck on unclean shutdown. Sponsored by: iXsystems, Yahoo!, and Juniper. With help from: McKusick and Peter Holm
2010-04-24 07:05:35 +00:00
int clearmode;
Refinement to revision 1.16 of ufs/ffs/ffs_snapshot.c to reduce the amount of time that the filesystem must be suspended. The current snapshot is elided as well as the earlier snapshots.
2001-05-04 05:49:28 +00:00
{
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
int i, error, indiroff;
ufs_lbn_t lbn, rlbn;
ufs2_daddr_t len, blkno, numblks, blksperindir;
struct ufs1_dinode *dip;
When taking a snapshot, we must check for active files that have been unlinked (e.g., with a zero link count). We have to expunge all trace of these files from the snapshot so that they are neither reclaimed prematurely by fsck nor saved unnecessarily by dump.
2002-02-02 01:42:44 +00:00
struct thread *td = curthread;
Refinement to revision 1.16 of ufs/ffs/ffs_snapshot.c to reduce the amount of time that the filesystem must be suspended. The current snapshot is elided as well as the earlier snapshots.
2001-05-04 05:49:28 +00:00
struct buf *bp;
/*
When taking a snapshot, we must check for active files that have been unlinked (e.g., with a zero link count). We have to expunge all trace of these files from the snapshot so that they are neither reclaimed prematurely by fsck nor saved unnecessarily by dump.
2002-02-02 01:42:44 +00:00
* Prepare to expunge the inode. If its inode block has not
* yet been copied, then allocate and fill the copy.
Refinement to revision 1.16 of ufs/ffs/ffs_snapshot.c to reduce the amount of time that the filesystem must be suspended. The current snapshot is elided as well as the earlier snapshots.
2001-05-04 05:49:28 +00:00
*/
When taking a snapshot, we must check for active files that have been unlinked (e.g., with a zero link count). We have to expunge all trace of these files from the snapshot so that they are neither reclaimed prematurely by fsck nor saved unnecessarily by dump.
2002-02-02 01:42:44 +00:00
lbn = fragstoblks(fs, ino_to_fsba(fs, cancelip->i_number));
blkno = 0;
if (lbn < NDADDR) {
Have to use bread() rather than UFS_BALLOC() when obtaining a previously allocated block as the previous use of the block may have fallen out of the cache. Failure to reread its contents cause zeroed results to be written instead of the proper contents. Conversely, when the block is going to be entirely filled in, it is not necessary reread the old contents. Sponsored by: DARPA & NAI Labs. Approved by: re
2002-12-03 18:19:27 +00:00
blkno = VTOI(snapvp)->i_din1->di_db[lbn];
When taking a snapshot, we must check for active files that have been unlinked (e.g., with a zero link count). We have to expunge all trace of these files from the snapshot so that they are neither reclaimed prematurely by fsck nor saved unnecessarily by dump.
2002-02-02 01:42:44 +00:00
} else {
- Call softdep_prealloc() before any of the balloc routines in the snapshot code. - Don't fsync() vnodes in prealloc if copy on write is in progress. It is not safe to recurse back into the write path here. Reported by: Vladimir Grebenschikov <vova@fbsd.ru>
2010-05-07 08:45:21 +00:00
if (DOINGSOFTDEP(snapvp))
softdep_prealloc(snapvp, MNT_WAIT);
Move the P_COWINPROGRESS flag from being a per-process p_flag to being a per-thread td_pflag which doesn't require any locks to read or write as it is only read or written by curthread on itself. Glanced at by: mckusick
2003-10-23 21:14:08 +00:00
td->td_pflags |= TDP_COWINPROGRESS;
Don't use the UFS_* and VFS_* functions where a direct call is possble. The UFS_ functions are for UFS to call back into VFS. The VFS functions are external entry points into the filesystem.
2005-02-08 17:40:01 +00:00
error = ffs_balloc_ufs1(snapvp, lblktosize(fs, (off_t)lbn),
Rename the BALLOC flags from B_* to BA_* to avoid confusion with the struct buf B_ flags. Approved by: mckusick
2002-06-23 06:12:22 +00:00
fs->fs_bsize, KERNCRED, BA_METAONLY, &bp);
Move the P_COWINPROGRESS flag from being a per-process p_flag to being a per-thread td_pflag which doesn't require any locks to read or write as it is only read or written by curthread on itself. Glanced at by: mckusick
2003-10-23 21:14:08 +00:00
td->td_pflags &= ~TDP_COWINPROGRESS;
When taking a snapshot, we must check for active files that have been unlinked (e.g., with a zero link count). We have to expunge all trace of these files from the snapshot so that they are neither reclaimed prematurely by fsck nor saved unnecessarily by dump.
2002-02-02 01:42:44 +00:00
if (error)
return (error);
indiroff = (lbn - NDADDR) % NINDIR(fs);
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
blkno = ((ufs1_daddr_t *)(bp->b_data))[indiroff];
When taking a snapshot, we must check for active files that have been unlinked (e.g., with a zero link count). We have to expunge all trace of these files from the snapshot so that they are neither reclaimed prematurely by fsck nor saved unnecessarily by dump.
2002-02-02 01:42:44 +00:00
bqrelse(bp);
}
Have to use bread() rather than UFS_BALLOC() when obtaining a previously allocated block as the previous use of the block may have fallen out of the cache. Failure to reread its contents cause zeroed results to be written instead of the proper contents. Conversely, when the block is going to be entirely filled in, it is not necessary reread the old contents. Sponsored by: DARPA & NAI Labs. Approved by: re
2002-12-03 18:19:27 +00:00
if (blkno != 0) {
if ((error = bread(snapvp, lbn, fs->fs_bsize, KERNCRED, &bp)))
return (error);
} else {
Don't use the UFS_* and VFS_* functions where a direct call is possble. The UFS_ functions are for UFS to call back into VFS. The VFS functions are external entry points into the filesystem.
2005-02-08 17:40:01 +00:00
error = ffs_balloc_ufs1(snapvp, lblktosize(fs, (off_t)lbn),
Have to use bread() rather than UFS_BALLOC() when obtaining a previously allocated block as the previous use of the block may have fallen out of the cache. Failure to reread its contents cause zeroed results to be written instead of the proper contents. Conversely, when the block is going to be entirely filled in, it is not necessary reread the old contents. Sponsored by: DARPA & NAI Labs. Approved by: re
2002-12-03 18:19:27 +00:00
fs->fs_bsize, KERNCRED, 0, &bp);
if (error)
return (error);
Create struct snapdata which contains the snapshot fields from cdev and the previously malloc'ed snapshot lock. Malloc struct snapdata instead of just the lock. Replace snapshot fields in cdev with pointer to snapdata (saves 16 bytes). While here, give the private readblock() function a vnode argument in preparation for moving UFS to access GEOM directly.
2004-09-13 07:29:45 +00:00
if ((error = readblock(snapvp, bp, lbn)) != 0)
Have to use bread() rather than UFS_BALLOC() when obtaining a previously allocated block as the previous use of the block may have fallen out of the cache. Failure to reread its contents cause zeroed results to be written instead of the proper contents. Conversely, when the block is going to be entirely filled in, it is not necessary reread the old contents. Sponsored by: DARPA & NAI Labs. Approved by: re
2002-12-03 18:19:27 +00:00
return (error);
}
When taking a snapshot, we must check for active files that have been unlinked (e.g., with a zero link count). We have to expunge all trace of these files from the snapshot so that they are neither reclaimed prematurely by fsck nor saved unnecessarily by dump.
2002-02-02 01:42:44 +00:00
/*
* Set a snapshot inode to be a zero length file, regular files
Expunge traces of unlinked snapshot files when making a new snapshot.
2006-05-13 20:41:37 +00:00
* or unlinked snapshots to be completely unallocated.
When taking a snapshot, we must check for active files that have been unlinked (e.g., with a zero link count). We have to expunge all trace of these files from the snapshot so that they are neither reclaimed prematurely by fsck nor saved unnecessarily by dump.
2002-02-02 01:42:44 +00:00
*/
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
dip = (struct ufs1_dinode *)bp->b_data +
ino_to_fsbo(fs, cancelip->i_number);
- Merge soft-updates journaling from projects/suj/head into head. This brings in support for an optional intent log which eliminates the need for background fsck on unclean shutdown. Sponsored by: iXsystems, Yahoo!, and Juniper. With help from: McKusick and Peter Holm
2010-04-24 07:05:35 +00:00
if (clearmode || cancelip->i_effnlink == 0)
When taking a snapshot, we must check for active files that have been unlinked (e.g., with a zero link count). We have to expunge all trace of these files from the snapshot so that they are neither reclaimed prematurely by fsck nor saved unnecessarily by dump.
2002-02-02 01:42:44 +00:00
dip->di_mode = 0;
Refinement to revision 1.16 of ufs/ffs/ffs_snapshot.c to reduce the amount of time that the filesystem must be suspended. The current snapshot is elided as well as the earlier snapshots.
2001-05-04 05:49:28 +00:00
dip->di_size = 0;
dip->di_blocks = 0;
dip->di_flags &= ~SF_SNAPSHOT;
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
bzero(&dip->di_db[0], (NDADDR + NIADDR) * sizeof(ufs1_daddr_t));
Refinement to revision 1.16 of ufs/ffs/ffs_snapshot.c to reduce the amount of time that the filesystem must be suspended. The current snapshot is elided as well as the earlier snapshots.
2001-05-04 05:49:28 +00:00
bdwrite(bp);
Only the most recent snapshot contains the complete list of blocks that were copied in all of the earlier snapshots, thus its precomputed list must be used in the copyonwrite test. Using incomplete lists may lead to deadlock. Also do not include the blocks used for the indirect pointers in the indirect pointers as this may lead to inconsistent snapshots. Sponsored by: DARPA & NAI Labs. Approved by: re
2002-12-14 01:36:59 +00:00
/*
* Now go through and expunge all the blocks in the file
* using the function requested.
*/
numblks = howmany(cancelip->i_size, fs->fs_bsize);
if ((error = (*acctfunc)(snapvp, &cancelip->i_din1->di_db[0],
&cancelip->i_din1->di_db[NDADDR], fs, 0, expungetype)))
return (error);
if ((error = (*acctfunc)(snapvp, &cancelip->i_din1->di_ib[0],
&cancelip->i_din1->di_ib[NIADDR], fs, -1, expungetype)))
return (error);
blksperindir = 1;
lbn = -NDADDR;
len = numblks - NDADDR;
rlbn = NDADDR;
for (i = 0; len > 0 && i < NIADDR; i++) {
error = indiracct_ufs1(snapvp, ITOV(cancelip), i,
cancelip->i_din1->di_ib[i], lbn, rlbn, len,
blksperindir, fs, acctfunc, expungetype);
if (error)
return (error);
blksperindir *= NINDIR(fs);
lbn -= blksperindir + 1;
len -= blksperindir;
rlbn += blksperindir;
}
Refinement to revision 1.16 of ufs/ffs/ffs_snapshot.c to reduce the amount of time that the filesystem must be suspended. The current snapshot is elided as well as the earlier snapshots.
2001-05-04 05:49:28 +00:00
return (0);
}
Add snapshots to the fast filesystem. Most of the changes support the gating of system calls that cause modifications to the underlying filesystem. The gating can be enabled by any filesystem that needs to consistently suspend operations by adding the vop_stdgetwritemount to their set of vnops. Once gating is enabled, the function vfs_write_suspend stops all new write operations to a filesystem, allows any filesystem modifying system calls already in progress to complete, then sync's the filesystem to disk and returns. The function vfs_write_resume allows the suspended write operations to begin again. Gating is not added by default for all filesystems as for SMP systems it adds two extra locks to such critical kernel paths as the write system call. Thus, gating should only be added as needed. Details on the use and current status of snapshots in FFS can be found in /sys/ufs/ffs/README.snapshot so for brevity and timelyness is not included here. Unless and until you create a snapshot file, these changes should have no effect on your system (famous last words).
2000-07-11 22:07:57 +00:00
/*
* Descend an indirect block chain for vnode cancelvp accounting for all
* its indirect blocks in snapvp.
*/
static int
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
indiracct_ufs1(snapvp, cancelvp, level, blkno, lbn, rlbn, remblks,
blksperindir, fs, acctfunc, expungetype)
Add snapshots to the fast filesystem. Most of the changes support the gating of system calls that cause modifications to the underlying filesystem. The gating can be enabled by any filesystem that needs to consistently suspend operations by adding the vop_stdgetwritemount to their set of vnops. Once gating is enabled, the function vfs_write_suspend stops all new write operations to a filesystem, allows any filesystem modifying system calls already in progress to complete, then sync's the filesystem to disk and returns. The function vfs_write_resume allows the suspended write operations to begin again. Gating is not added by default for all filesystems as for SMP systems it adds two extra locks to such critical kernel paths as the write system call. Thus, gating should only be added as needed. Details on the use and current status of snapshots in FFS can be found in /sys/ufs/ffs/README.snapshot so for brevity and timelyness is not included here. Unless and until you create a snapshot file, these changes should have no effect on your system (famous last words).
2000-07-11 22:07:57 +00:00
struct vnode *snapvp;
struct vnode *cancelvp;
int level;
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
ufs1_daddr_t blkno;
ufs_lbn_t lbn;
ufs_lbn_t rlbn;
ufs_lbn_t remblks;
ufs_lbn_t blksperindir;
Refinement to revision 1.16 of ufs/ffs/ffs_snapshot.c to reduce the amount of time that the filesystem must be suspended. The current snapshot is elided as well as the earlier snapshots.
2001-05-04 05:49:28 +00:00
struct fs *fs;
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
int (*acctfunc)(struct vnode *, ufs1_daddr_t *, ufs1_daddr_t *,
struct fs *, ufs_lbn_t, int);
When taking a snapshot, we must check for active files that have been unlinked (e.g., with a zero link count). We have to expunge all trace of these files from the snapshot so that they are neither reclaimed prematurely by fsck nor saved unnecessarily by dump.
2002-02-02 01:42:44 +00:00
int expungetype;
Add snapshots to the fast filesystem. Most of the changes support the gating of system calls that cause modifications to the underlying filesystem. The gating can be enabled by any filesystem that needs to consistently suspend operations by adding the vop_stdgetwritemount to their set of vnops. Once gating is enabled, the function vfs_write_suspend stops all new write operations to a filesystem, allows any filesystem modifying system calls already in progress to complete, then sync's the filesystem to disk and returns. The function vfs_write_resume allows the suspended write operations to begin again. Gating is not added by default for all filesystems as for SMP systems it adds two extra locks to such critical kernel paths as the write system call. Thus, gating should only be added as needed. Details on the use and current status of snapshots in FFS can be found in /sys/ufs/ffs/README.snapshot so for brevity and timelyness is not included here. Unless and until you create a snapshot file, these changes should have no effect on your system (famous last words).
2000-07-11 22:07:57 +00:00
{
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
int error, num, i;
ufs_lbn_t subblksperindir;
Add snapshots to the fast filesystem. Most of the changes support the gating of system calls that cause modifications to the underlying filesystem. The gating can be enabled by any filesystem that needs to consistently suspend operations by adding the vop_stdgetwritemount to their set of vnops. Once gating is enabled, the function vfs_write_suspend stops all new write operations to a filesystem, allows any filesystem modifying system calls already in progress to complete, then sync's the filesystem to disk and returns. The function vfs_write_resume allows the suspended write operations to begin again. Gating is not added by default for all filesystems as for SMP systems it adds two extra locks to such critical kernel paths as the write system call. Thus, gating should only be added as needed. Details on the use and current status of snapshots in FFS can be found in /sys/ufs/ffs/README.snapshot so for brevity and timelyness is not included here. Unless and until you create a snapshot file, these changes should have no effect on your system (famous last words).
2000-07-11 22:07:57 +00:00
struct indir indirs[NIADDR + 2];
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
ufs1_daddr_t last, *bap;
Add snapshots to the fast filesystem. Most of the changes support the gating of system calls that cause modifications to the underlying filesystem. The gating can be enabled by any filesystem that needs to consistently suspend operations by adding the vop_stdgetwritemount to their set of vnops. Once gating is enabled, the function vfs_write_suspend stops all new write operations to a filesystem, allows any filesystem modifying system calls already in progress to complete, then sync's the filesystem to disk and returns. The function vfs_write_resume allows the suspended write operations to begin again. Gating is not added by default for all filesystems as for SMP systems it adds two extra locks to such critical kernel paths as the write system call. Thus, gating should only be added as needed. Details on the use and current status of snapshots in FFS can be found in /sys/ufs/ffs/README.snapshot so for brevity and timelyness is not included here. Unless and until you create a snapshot file, these changes should have no effect on your system (famous last words).
2000-07-11 22:07:57 +00:00
struct buf *bp;
When expunging unlinked files from a snapshot, skip over holes in the file rather than panicing with "indiracct: botched params". Submitted by: Mark Santcroos <marks@ripe.net>
2003-10-17 13:57:58 +00:00
if (blkno == 0) {
if (expungetype == BLK_NOCOPY)
return (0);
panic("indiracct_ufs1: missing indir");
}
Add snapshots to the fast filesystem. Most of the changes support the gating of system calls that cause modifications to the underlying filesystem. The gating can be enabled by any filesystem that needs to consistently suspend operations by adding the vop_stdgetwritemount to their set of vnops. Once gating is enabled, the function vfs_write_suspend stops all new write operations to a filesystem, allows any filesystem modifying system calls already in progress to complete, then sync's the filesystem to disk and returns. The function vfs_write_resume allows the suspended write operations to begin again. Gating is not added by default for all filesystems as for SMP systems it adds two extra locks to such critical kernel paths as the write system call. Thus, gating should only be added as needed. Details on the use and current status of snapshots in FFS can be found in /sys/ufs/ffs/README.snapshot so for brevity and timelyness is not included here. Unless and until you create a snapshot file, these changes should have no effect on your system (famous last words).
2000-07-11 22:07:57 +00:00
if ((error = ufs_getlbns(cancelvp, rlbn, indirs, &num)) != 0)
return (error);
When expunging unlinked files from a snapshot, skip over holes in the file rather than panicing with "indiracct: botched params". Submitted by: Mark Santcroos <marks@ripe.net>
2003-10-17 13:57:58 +00:00
if (lbn != indirs[num - 1 - level].in_lbn || num < 2)
panic("indiracct_ufs1: botched params");
Add snapshots to the fast filesystem. Most of the changes support the gating of system calls that cause modifications to the underlying filesystem. The gating can be enabled by any filesystem that needs to consistently suspend operations by adding the vop_stdgetwritemount to their set of vnops. Once gating is enabled, the function vfs_write_suspend stops all new write operations to a filesystem, allows any filesystem modifying system calls already in progress to complete, then sync's the filesystem to disk and returns. The function vfs_write_resume allows the suspended write operations to begin again. Gating is not added by default for all filesystems as for SMP systems it adds two extra locks to such critical kernel paths as the write system call. Thus, gating should only be added as needed. Details on the use and current status of snapshots in FFS can be found in /sys/ufs/ffs/README.snapshot so for brevity and timelyness is not included here. Unless and until you create a snapshot file, these changes should have no effect on your system (famous last words).
2000-07-11 22:07:57 +00:00
/*
* We have to expand bread here since it will deadlock looking
* up the block number for any blocks that are not in the cache.
*/
- Add a new 'flags' parameter to getblk(). - Define one flag GB_LOCK_NOWAIT that tells getblk() to pass the LK_NOWAIT flag to the initial BUF_LOCK(). This will eventually be used in cases were we want to use a buffer only if it is not currently in use. - Convert all consumers of the getblk() api to use this extra parameter. Reviwed by: arch Not objected to by: mckusick
2003-03-04 00:04:44 +00:00
bp = getblk(cancelvp, lbn, fs->fs_bsize, 0, 0, 0);
Add snapshots to the fast filesystem. Most of the changes support the gating of system calls that cause modifications to the underlying filesystem. The gating can be enabled by any filesystem that needs to consistently suspend operations by adding the vop_stdgetwritemount to their set of vnops. Once gating is enabled, the function vfs_write_suspend stops all new write operations to a filesystem, allows any filesystem modifying system calls already in progress to complete, then sync's the filesystem to disk and returns. The function vfs_write_resume allows the suspended write operations to begin again. Gating is not added by default for all filesystems as for SMP systems it adds two extra locks to such critical kernel paths as the write system call. Thus, gating should only be added as needed. Details on the use and current status of snapshots in FFS can be found in /sys/ufs/ffs/README.snapshot so for brevity and timelyness is not included here. Unless and until you create a snapshot file, these changes should have no effect on your system (famous last words).
2000-07-11 22:07:57 +00:00
bp->b_blkno = fsbtodb(fs, blkno);
if ((bp->b_flags & (B_DONE | B_DELWRI)) == 0 &&
Create struct snapdata which contains the snapshot fields from cdev and the previously malloc'ed snapshot lock. Malloc struct snapdata instead of just the lock. Replace snapshot fields in cdev with pointer to snapdata (saves 16 bytes). While here, give the private readblock() function a vnode argument in preparation for moving UFS to access GEOM directly.
2004-09-13 07:29:45 +00:00
(error = readblock(cancelvp, bp, fragstoblks(fs, blkno)))) {
Add snapshots to the fast filesystem. Most of the changes support the gating of system calls that cause modifications to the underlying filesystem. The gating can be enabled by any filesystem that needs to consistently suspend operations by adding the vop_stdgetwritemount to their set of vnops. Once gating is enabled, the function vfs_write_suspend stops all new write operations to a filesystem, allows any filesystem modifying system calls already in progress to complete, then sync's the filesystem to disk and returns. The function vfs_write_resume allows the suspended write operations to begin again. Gating is not added by default for all filesystems as for SMP systems it adds two extra locks to such critical kernel paths as the write system call. Thus, gating should only be added as needed. Details on the use and current status of snapshots in FFS can be found in /sys/ufs/ffs/README.snapshot so for brevity and timelyness is not included here. Unless and until you create a snapshot file, these changes should have no effect on your system (famous last words).
2000-07-11 22:07:57 +00:00
brelse(bp);
return (error);
}
/*
* Account for the block pointers in this indirect block.
*/
last = howmany(remblks, blksperindir);
if (last > NINDIR(fs))
last = NINDIR(fs);
Retire the MALLOC and FREE macros. They are an abomination unto style(9). MFC after: 3 months
2008-10-23 15:53:51 +00:00
bap = malloc(fs->fs_bsize, M_DEVBUF, M_WAITOK);
Refinement to revision 1.16 of ufs/ffs/ffs_snapshot.c to reduce the amount of time that the filesystem must be suspended. The current snapshot is elided as well as the earlier snapshots.
2001-05-04 05:49:28 +00:00
bcopy(bp->b_data, (caddr_t)bap, fs->fs_bsize);
bqrelse(bp);
Only the most recent snapshot contains the complete list of blocks that were copied in all of the earlier snapshots, thus its precomputed list must be used in the copyonwrite test. Using incomplete lists may lead to deadlock. Also do not include the blocks used for the indirect pointers in the indirect pointers as this may lead to inconsistent snapshots. Sponsored by: DARPA & NAI Labs. Approved by: re
2002-12-14 01:36:59 +00:00
error = (*acctfunc)(snapvp, &bap[0], &bap[last], fs,
level == 0 ? rlbn : -1, expungetype);
Add snapshots to the fast filesystem. Most of the changes support the gating of system calls that cause modifications to the underlying filesystem. The gating can be enabled by any filesystem that needs to consistently suspend operations by adding the vop_stdgetwritemount to their set of vnops. Once gating is enabled, the function vfs_write_suspend stops all new write operations to a filesystem, allows any filesystem modifying system calls already in progress to complete, then sync's the filesystem to disk and returns. The function vfs_write_resume allows the suspended write operations to begin again. Gating is not added by default for all filesystems as for SMP systems it adds two extra locks to such critical kernel paths as the write system call. Thus, gating should only be added as needed. Details on the use and current status of snapshots in FFS can be found in /sys/ufs/ffs/README.snapshot so for brevity and timelyness is not included here. Unless and until you create a snapshot file, these changes should have no effect on your system (famous last words).
2000-07-11 22:07:57 +00:00
if (error || level == 0)
goto out;
/*
* Account for the block pointers in each of the indirect blocks
* in the levels below us.
*/
subblksperindir = blksperindir / NINDIR(fs);
for (lbn++, level--, i = 0; i < last; i++) {
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
error = indiracct_ufs1(snapvp, cancelvp, level, bap[i], lbn,
When taking a snapshot, we must check for active files that have been unlinked (e.g., with a zero link count). We have to expunge all trace of these files from the snapshot so that they are neither reclaimed prematurely by fsck nor saved unnecessarily by dump.
2002-02-02 01:42:44 +00:00
rlbn, remblks, subblksperindir, fs, acctfunc, expungetype);
Add snapshots to the fast filesystem. Most of the changes support the gating of system calls that cause modifications to the underlying filesystem. The gating can be enabled by any filesystem that needs to consistently suspend operations by adding the vop_stdgetwritemount to their set of vnops. Once gating is enabled, the function vfs_write_suspend stops all new write operations to a filesystem, allows any filesystem modifying system calls already in progress to complete, then sync's the filesystem to disk and returns. The function vfs_write_resume allows the suspended write operations to begin again. Gating is not added by default for all filesystems as for SMP systems it adds two extra locks to such critical kernel paths as the write system call. Thus, gating should only be added as needed. Details on the use and current status of snapshots in FFS can be found in /sys/ufs/ffs/README.snapshot so for brevity and timelyness is not included here. Unless and until you create a snapshot file, these changes should have no effect on your system (famous last words).
2000-07-11 22:07:57 +00:00
if (error)
goto out;
rlbn += blksperindir;
lbn -= blksperindir;
remblks -= blksperindir;
}
out:
Retire the MALLOC and FREE macros. They are an abomination unto style(9). MFC after: 3 months
2008-10-23 15:53:51 +00:00
free(bap, M_DEVBUF);
Add snapshots to the fast filesystem. Most of the changes support the gating of system calls that cause modifications to the underlying filesystem. The gating can be enabled by any filesystem that needs to consistently suspend operations by adding the vop_stdgetwritemount to their set of vnops. Once gating is enabled, the function vfs_write_suspend stops all new write operations to a filesystem, allows any filesystem modifying system calls already in progress to complete, then sync's the filesystem to disk and returns. The function vfs_write_resume allows the suspended write operations to begin again. Gating is not added by default for all filesystems as for SMP systems it adds two extra locks to such critical kernel paths as the write system call. Thus, gating should only be added as needed. Details on the use and current status of snapshots in FFS can be found in /sys/ufs/ffs/README.snapshot so for brevity and timelyness is not included here. Unless and until you create a snapshot file, these changes should have no effect on your system (famous last words).
2000-07-11 22:07:57 +00:00
return (error);
}
When taking a snapshot, we must check for active files that have been unlinked (e.g., with a zero link count). We have to expunge all trace of these files from the snapshot so that they are neither reclaimed prematurely by fsck nor saved unnecessarily by dump.
2002-02-02 01:42:44 +00:00
/*
* Do both snap accounting and map accounting.
*/
static int
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
fullacct_ufs1(vp, oldblkp, lastblkp, fs, lblkno, exptype)
struct vnode *vp;
ufs1_daddr_t *oldblkp, *lastblkp;
struct fs *fs;
ufs_lbn_t lblkno;
int exptype; /* BLK_SNAP or BLK_NOCOPY */
{
int error;
if ((error = snapacct_ufs1(vp, oldblkp, lastblkp, fs, lblkno, exptype)))
return (error);
return (mapacct_ufs1(vp, oldblkp, lastblkp, fs, lblkno, exptype));
}
/*
* Identify a set of blocks allocated in a snapshot inode.
*/
static int
snapacct_ufs1(vp, oldblkp, lastblkp, fs, lblkno, expungetype)
When taking a snapshot, we must check for active files that have been unlinked (e.g., with a zero link count). We have to expunge all trace of these files from the snapshot so that they are neither reclaimed prematurely by fsck nor saved unnecessarily by dump.
2002-02-02 01:42:44 +00:00
struct vnode *vp;
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
ufs1_daddr_t *oldblkp, *lastblkp;
When taking a snapshot, we must check for active files that have been unlinked (e.g., with a zero link count). We have to expunge all trace of these files from the snapshot so that they are neither reclaimed prematurely by fsck nor saved unnecessarily by dump.
2002-02-02 01:42:44 +00:00
struct fs *fs;
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
ufs_lbn_t lblkno;
When taking a snapshot, we must check for active files that have been unlinked (e.g., with a zero link count). We have to expunge all trace of these files from the snapshot so that they are neither reclaimed prematurely by fsck nor saved unnecessarily by dump.
2002-02-02 01:42:44 +00:00
int expungetype; /* BLK_SNAP or BLK_NOCOPY */
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
{
struct inode *ip = VTOI(vp);
ufs1_daddr_t blkno, *blkp;
ufs_lbn_t lbn;
struct buf *ibp;
int error;
for ( ; oldblkp < lastblkp; oldblkp++) {
blkno = *oldblkp;
if (blkno == 0 || blkno == BLK_NOCOPY || blkno == BLK_SNAP)
continue;
lbn = fragstoblks(fs, blkno);
if (lbn < NDADDR) {
blkp = &ip->i_din1->di_db[lbn];
ip->i_flag |= IN_CHANGE | IN_UPDATE;
} else {
Don't use the UFS_* and VFS_* functions where a direct call is possble. The UFS_ functions are for UFS to call back into VFS. The VFS functions are external entry points into the filesystem.
2005-02-08 17:40:01 +00:00
error = ffs_balloc_ufs1(vp, lblktosize(fs, (off_t)lbn),
Rename the BALLOC flags from B_* to BA_* to avoid confusion with the struct buf B_ flags. Approved by: mckusick
2002-06-23 06:12:22 +00:00
fs->fs_bsize, KERNCRED, BA_METAONLY, &ibp);
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
if (error)
return (error);
blkp = &((ufs1_daddr_t *)(ibp->b_data))
[(lbn - NDADDR) % NINDIR(fs)];
}
/*
* If we are expunging a snapshot vnode and we
* find a block marked BLK_NOCOPY, then it is
* one that has been allocated to this snapshot after
* we took our current snapshot and can be ignored.
*/
if (expungetype == BLK_SNAP && *blkp == BLK_NOCOPY) {
if (lbn >= NDADDR)
brelse(ibp);
} else {
if (*blkp != 0)
When expunging unlinked files from a snapshot, skip over holes in the file rather than panicing with "indiracct: botched params". Submitted by: Mark Santcroos <marks@ripe.net>
2003-10-17 13:57:58 +00:00
panic("snapacct_ufs1: bad block");
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
*blkp = expungetype;
if (lbn >= NDADDR)
bdwrite(ibp);
}
}
return (0);
}
/*
* Account for a set of blocks allocated in a snapshot inode.
*/
static int
mapacct_ufs1(vp, oldblkp, lastblkp, fs, lblkno, expungetype)
struct vnode *vp;
ufs1_daddr_t *oldblkp, *lastblkp;
struct fs *fs;
ufs_lbn_t lblkno;
int expungetype;
{
ufs1_daddr_t blkno;
When creating a snapshot, create a list of initially allocated blocks. Whenever doing a copy-on-write check, first look in the list of initially allocated blocks to see if it is there. If so, no further check is needed. If not, fall through and do the full check. This change eliminates one of two known deadlocks caused by snapshots. Handling the second deadlock will be the subject of another check-in. This change also reduces the cost of the copy-on-write check by speeding up the verification of frequently checked blocks. Sponsored by: DARPA & NAI Labs.
2002-10-09 06:13:48 +00:00
struct inode *ip;
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
ino_t inum;
Fix corruption introduced in previous delta. Reported by: Aurelien Nephtali <aurelien.nephtali@wanadoo.fr> Sponsored by: DARPA & NAI Labs.
2002-12-18 19:50:28 +00:00
int acctit;
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
When creating a snapshot, create a list of initially allocated blocks. Whenever doing a copy-on-write check, first look in the list of initially allocated blocks to see if it is there. If so, no further check is needed. If not, fall through and do the full check. This change eliminates one of two known deadlocks caused by snapshots. Handling the second deadlock will be the subject of another check-in. This change also reduces the cost of the copy-on-write check by speeding up the verification of frequently checked blocks. Sponsored by: DARPA & NAI Labs.
2002-10-09 06:13:48 +00:00
ip = VTOI(vp);
inum = ip->i_number;
Fix corruption introduced in previous delta. Reported by: Aurelien Nephtali <aurelien.nephtali@wanadoo.fr> Sponsored by: DARPA & NAI Labs.
2002-12-18 19:50:28 +00:00
if (lblkno == -1)
acctit = 0;
else
acctit = 1;
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
for ( ; oldblkp < lastblkp; oldblkp++, lblkno++) {
blkno = *oldblkp;
if (blkno == 0 || blkno == BLK_NOCOPY)
continue;
Fix corruption introduced in previous delta. Reported by: Aurelien Nephtali <aurelien.nephtali@wanadoo.fr> Sponsored by: DARPA & NAI Labs.
2002-12-18 19:50:28 +00:00
if (acctit && expungetype == BLK_SNAP && blkno != BLK_SNAP)
Update to previous change (1.54) to use an approperly wide inode field so as to work correctly on 64-bit platforms. Reported-by: Jake Burkholder <jake@locore.ca> Sponsored by: DARPA & NAI Labs. Approved by: Ian Dowse <iedowse@maths.tcd.ie>
2002-12-15 19:25:59 +00:00
*ip->i_snapblklist++ = lblkno;
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
if (blkno == BLK_SNAP)
blkno = blkstofrags(fs, lblkno);
Ensure that filesystem metadata contained within persistent snapshots is always kept consistent. Suggested by: Jeff Roberson
2011-06-15 23:19:09 +00:00
ffs_blkfree(ip->i_ump, fs, vp, blkno, fs->fs_bsize, inum,
vp->v_type, NULL);
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
}
return (0);
}
/*
* Before expunging a snapshot inode, note all the
* blocks that it claims with BLK_SNAP so that fsck will
* be able to account for those blocks properly and so
* that this snapshot knows that it need not copy them
* if the other snapshot holding them is freed. This code
* is reproduced once each for UFS1 and UFS2.
*/
static int
- Merge soft-updates journaling from projects/suj/head into head. This brings in support for an optional intent log which eliminates the need for background fsck on unclean shutdown. Sponsored by: iXsystems, Yahoo!, and Juniper. With help from: McKusick and Peter Holm
2010-04-24 07:05:35 +00:00
expunge_ufs2(snapvp, cancelip, fs, acctfunc, expungetype, clearmode)
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
struct vnode *snapvp;
struct inode *cancelip;
struct fs *fs;
int (*acctfunc)(struct vnode *, ufs2_daddr_t *, ufs2_daddr_t *,
struct fs *, ufs_lbn_t, int);
int expungetype;
- Merge soft-updates journaling from projects/suj/head into head. This brings in support for an optional intent log which eliminates the need for background fsck on unclean shutdown. Sponsored by: iXsystems, Yahoo!, and Juniper. With help from: McKusick and Peter Holm
2010-04-24 07:05:35 +00:00
int clearmode;
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
{
int i, error, indiroff;
ufs_lbn_t lbn, rlbn;
ufs2_daddr_t len, blkno, numblks, blksperindir;
struct ufs2_dinode *dip;
struct thread *td = curthread;
struct buf *bp;
/*
* Prepare to expunge the inode. If its inode block has not
* yet been copied, then allocate and fill the copy.
*/
lbn = fragstoblks(fs, ino_to_fsba(fs, cancelip->i_number));
blkno = 0;
if (lbn < NDADDR) {
Have to use bread() rather than UFS_BALLOC() when obtaining a previously allocated block as the previous use of the block may have fallen out of the cache. Failure to reread its contents cause zeroed results to be written instead of the proper contents. Conversely, when the block is going to be entirely filled in, it is not necessary reread the old contents. Sponsored by: DARPA & NAI Labs. Approved by: re
2002-12-03 18:19:27 +00:00
blkno = VTOI(snapvp)->i_din2->di_db[lbn];
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
} else {
- Call softdep_prealloc() before any of the balloc routines in the snapshot code. - Don't fsync() vnodes in prealloc if copy on write is in progress. It is not safe to recurse back into the write path here. Reported by: Vladimir Grebenschikov <vova@fbsd.ru>
2010-05-07 08:45:21 +00:00
if (DOINGSOFTDEP(snapvp))
softdep_prealloc(snapvp, MNT_WAIT);
Move the P_COWINPROGRESS flag from being a per-process p_flag to being a per-thread td_pflag which doesn't require any locks to read or write as it is only read or written by curthread on itself. Glanced at by: mckusick
2003-10-23 21:14:08 +00:00
td->td_pflags |= TDP_COWINPROGRESS;
Don't use the UFS_* and VFS_* functions where a direct call is possble. The UFS_ functions are for UFS to call back into VFS. The VFS functions are external entry points into the filesystem.
2005-02-08 17:40:01 +00:00
error = ffs_balloc_ufs2(snapvp, lblktosize(fs, (off_t)lbn),
Rename the BALLOC flags from B_* to BA_* to avoid confusion with the struct buf B_ flags. Approved by: mckusick
2002-06-23 06:12:22 +00:00
fs->fs_bsize, KERNCRED, BA_METAONLY, &bp);
Move the P_COWINPROGRESS flag from being a per-process p_flag to being a per-thread td_pflag which doesn't require any locks to read or write as it is only read or written by curthread on itself. Glanced at by: mckusick
2003-10-23 21:14:08 +00:00
td->td_pflags &= ~TDP_COWINPROGRESS;
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
if (error)
return (error);
indiroff = (lbn - NDADDR) % NINDIR(fs);
blkno = ((ufs2_daddr_t *)(bp->b_data))[indiroff];
bqrelse(bp);
}
Have to use bread() rather than UFS_BALLOC() when obtaining a previously allocated block as the previous use of the block may have fallen out of the cache. Failure to reread its contents cause zeroed results to be written instead of the proper contents. Conversely, when the block is going to be entirely filled in, it is not necessary reread the old contents. Sponsored by: DARPA & NAI Labs. Approved by: re
2002-12-03 18:19:27 +00:00
if (blkno != 0) {
if ((error = bread(snapvp, lbn, fs->fs_bsize, KERNCRED, &bp)))
return (error);
} else {
Don't use the UFS_* and VFS_* functions where a direct call is possble. The UFS_ functions are for UFS to call back into VFS. The VFS functions are external entry points into the filesystem.
2005-02-08 17:40:01 +00:00
error = ffs_balloc_ufs2(snapvp, lblktosize(fs, (off_t)lbn),
Have to use bread() rather than UFS_BALLOC() when obtaining a previously allocated block as the previous use of the block may have fallen out of the cache. Failure to reread its contents cause zeroed results to be written instead of the proper contents. Conversely, when the block is going to be entirely filled in, it is not necessary reread the old contents. Sponsored by: DARPA & NAI Labs. Approved by: re
2002-12-03 18:19:27 +00:00
fs->fs_bsize, KERNCRED, 0, &bp);
if (error)
return (error);
Create struct snapdata which contains the snapshot fields from cdev and the previously malloc'ed snapshot lock. Malloc struct snapdata instead of just the lock. Replace snapshot fields in cdev with pointer to snapdata (saves 16 bytes). While here, give the private readblock() function a vnode argument in preparation for moving UFS to access GEOM directly.
2004-09-13 07:29:45 +00:00
if ((error = readblock(snapvp, bp, lbn)) != 0)
Have to use bread() rather than UFS_BALLOC() when obtaining a previously allocated block as the previous use of the block may have fallen out of the cache. Failure to reread its contents cause zeroed results to be written instead of the proper contents. Conversely, when the block is going to be entirely filled in, it is not necessary reread the old contents. Sponsored by: DARPA & NAI Labs. Approved by: re
2002-12-03 18:19:27 +00:00
return (error);
}
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
/*
* Set a snapshot inode to be a zero length file, regular files
* to be completely unallocated.
*/
dip = (struct ufs2_dinode *)bp->b_data +
ino_to_fsbo(fs, cancelip->i_number);
- Merge soft-updates journaling from projects/suj/head into head. This brings in support for an optional intent log which eliminates the need for background fsck on unclean shutdown. Sponsored by: iXsystems, Yahoo!, and Juniper. With help from: McKusick and Peter Holm
2010-04-24 07:05:35 +00:00
if (clearmode || cancelip->i_effnlink == 0)
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
dip->di_mode = 0;
dip->di_size = 0;
dip->di_blocks = 0;
dip->di_flags &= ~SF_SNAPSHOT;
bzero(&dip->di_db[0], (NDADDR + NIADDR) * sizeof(ufs2_daddr_t));
bdwrite(bp);
Only the most recent snapshot contains the complete list of blocks that were copied in all of the earlier snapshots, thus its precomputed list must be used in the copyonwrite test. Using incomplete lists may lead to deadlock. Also do not include the blocks used for the indirect pointers in the indirect pointers as this may lead to inconsistent snapshots. Sponsored by: DARPA & NAI Labs. Approved by: re
2002-12-14 01:36:59 +00:00
/*
* Now go through and expunge all the blocks in the file
* using the function requested.
*/
numblks = howmany(cancelip->i_size, fs->fs_bsize);
if ((error = (*acctfunc)(snapvp, &cancelip->i_din2->di_db[0],
&cancelip->i_din2->di_db[NDADDR], fs, 0, expungetype)))
return (error);
if ((error = (*acctfunc)(snapvp, &cancelip->i_din2->di_ib[0],
&cancelip->i_din2->di_ib[NIADDR], fs, -1, expungetype)))
return (error);
blksperindir = 1;
lbn = -NDADDR;
len = numblks - NDADDR;
rlbn = NDADDR;
for (i = 0; len > 0 && i < NIADDR; i++) {
error = indiracct_ufs2(snapvp, ITOV(cancelip), i,
cancelip->i_din2->di_ib[i], lbn, rlbn, len,
blksperindir, fs, acctfunc, expungetype);
if (error)
return (error);
blksperindir *= NINDIR(fs);
lbn -= blksperindir + 1;
len -= blksperindir;
rlbn += blksperindir;
}
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
return (0);
}
/*
* Descend an indirect block chain for vnode cancelvp accounting for all
* its indirect blocks in snapvp.
*/
static int
indiracct_ufs2(snapvp, cancelvp, level, blkno, lbn, rlbn, remblks,
blksperindir, fs, acctfunc, expungetype)
struct vnode *snapvp;
struct vnode *cancelvp;
int level;
ufs2_daddr_t blkno;
ufs_lbn_t lbn;
ufs_lbn_t rlbn;
ufs_lbn_t remblks;
ufs_lbn_t blksperindir;
struct fs *fs;
int (*acctfunc)(struct vnode *, ufs2_daddr_t *, ufs2_daddr_t *,
struct fs *, ufs_lbn_t, int);
int expungetype;
{
int error, num, i;
ufs_lbn_t subblksperindir;
struct indir indirs[NIADDR + 2];
ufs2_daddr_t last, *bap;
struct buf *bp;
When expunging unlinked files from a snapshot, skip over holes in the file rather than panicing with "indiracct: botched params". Submitted by: Mark Santcroos <marks@ripe.net>
2003-10-17 13:57:58 +00:00
if (blkno == 0) {
if (expungetype == BLK_NOCOPY)
return (0);
panic("indiracct_ufs2: missing indir");
}
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
if ((error = ufs_getlbns(cancelvp, rlbn, indirs, &num)) != 0)
return (error);
When expunging unlinked files from a snapshot, skip over holes in the file rather than panicing with "indiracct: botched params". Submitted by: Mark Santcroos <marks@ripe.net>
2003-10-17 13:57:58 +00:00
if (lbn != indirs[num - 1 - level].in_lbn || num < 2)
panic("indiracct_ufs2: botched params");
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
/*
* We have to expand bread here since it will deadlock looking
* up the block number for any blocks that are not in the cache.
*/
- Add a new 'flags' parameter to getblk(). - Define one flag GB_LOCK_NOWAIT that tells getblk() to pass the LK_NOWAIT flag to the initial BUF_LOCK(). This will eventually be used in cases were we want to use a buffer only if it is not currently in use. - Convert all consumers of the getblk() api to use this extra parameter. Reviwed by: arch Not objected to by: mckusick
2003-03-04 00:04:44 +00:00
bp = getblk(cancelvp, lbn, fs->fs_bsize, 0, 0, 0);
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
bp->b_blkno = fsbtodb(fs, blkno);
if ((bp->b_flags & (B_DONE | B_DELWRI)) == 0 &&
Create struct snapdata which contains the snapshot fields from cdev and the previously malloc'ed snapshot lock. Malloc struct snapdata instead of just the lock. Replace snapshot fields in cdev with pointer to snapdata (saves 16 bytes). While here, give the private readblock() function a vnode argument in preparation for moving UFS to access GEOM directly.
2004-09-13 07:29:45 +00:00
(error = readblock(cancelvp, bp, fragstoblks(fs, blkno)))) {
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
brelse(bp);
return (error);
}
/*
* Account for the block pointers in this indirect block.
*/
last = howmany(remblks, blksperindir);
if (last > NINDIR(fs))
last = NINDIR(fs);
Retire the MALLOC and FREE macros. They are an abomination unto style(9). MFC after: 3 months
2008-10-23 15:53:51 +00:00
bap = malloc(fs->fs_bsize, M_DEVBUF, M_WAITOK);
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
bcopy(bp->b_data, (caddr_t)bap, fs->fs_bsize);
bqrelse(bp);
Only the most recent snapshot contains the complete list of blocks that were copied in all of the earlier snapshots, thus its precomputed list must be used in the copyonwrite test. Using incomplete lists may lead to deadlock. Also do not include the blocks used for the indirect pointers in the indirect pointers as this may lead to inconsistent snapshots. Sponsored by: DARPA & NAI Labs. Approved by: re
2002-12-14 01:36:59 +00:00
error = (*acctfunc)(snapvp, &bap[0], &bap[last], fs,
level == 0 ? rlbn : -1, expungetype);
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
if (error || level == 0)
goto out;
/*
* Account for the block pointers in each of the indirect blocks
* in the levels below us.
*/
subblksperindir = blksperindir / NINDIR(fs);
for (lbn++, level--, i = 0; i < last; i++) {
error = indiracct_ufs2(snapvp, cancelvp, level, bap[i], lbn,
rlbn, remblks, subblksperindir, fs, acctfunc, expungetype);
if (error)
goto out;
rlbn += blksperindir;
lbn -= blksperindir;
remblks -= blksperindir;
}
out:
Retire the MALLOC and FREE macros. They are an abomination unto style(9). MFC after: 3 months
2008-10-23 15:53:51 +00:00
free(bap, M_DEVBUF);
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
return (error);
}
/*
* Do both snap accounting and map accounting.
*/
static int
fullacct_ufs2(vp, oldblkp, lastblkp, fs, lblkno, exptype)
struct vnode *vp;
ufs2_daddr_t *oldblkp, *lastblkp;
struct fs *fs;
ufs_lbn_t lblkno;
int exptype; /* BLK_SNAP or BLK_NOCOPY */
When taking a snapshot, we must check for active files that have been unlinked (e.g., with a zero link count). We have to expunge all trace of these files from the snapshot so that they are neither reclaimed prematurely by fsck nor saved unnecessarily by dump.
2002-02-02 01:42:44 +00:00
{
int error;
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
if ((error = snapacct_ufs2(vp, oldblkp, lastblkp, fs, lblkno, exptype)))
When taking a snapshot, we must check for active files that have been unlinked (e.g., with a zero link count). We have to expunge all trace of these files from the snapshot so that they are neither reclaimed prematurely by fsck nor saved unnecessarily by dump.
2002-02-02 01:42:44 +00:00
return (error);
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
return (mapacct_ufs2(vp, oldblkp, lastblkp, fs, lblkno, exptype));
When taking a snapshot, we must check for active files that have been unlinked (e.g., with a zero link count). We have to expunge all trace of these files from the snapshot so that they are neither reclaimed prematurely by fsck nor saved unnecessarily by dump.
2002-02-02 01:42:44 +00:00
}
Add snapshots to the fast filesystem. Most of the changes support the gating of system calls that cause modifications to the underlying filesystem. The gating can be enabled by any filesystem that needs to consistently suspend operations by adding the vop_stdgetwritemount to their set of vnops. Once gating is enabled, the function vfs_write_suspend stops all new write operations to a filesystem, allows any filesystem modifying system calls already in progress to complete, then sync's the filesystem to disk and returns. The function vfs_write_resume allows the suspended write operations to begin again. Gating is not added by default for all filesystems as for SMP systems it adds two extra locks to such critical kernel paths as the write system call. Thus, gating should only be added as needed. Details on the use and current status of snapshots in FFS can be found in /sys/ufs/ffs/README.snapshot so for brevity and timelyness is not included here. Unless and until you create a snapshot file, these changes should have no effect on your system (famous last words).
2000-07-11 22:07:57 +00:00
/*
Minimize the time necessary to suspend operations on a filesystem when taking a snapshot. The two time consuming operations are scanning all the filesystem bitmaps to determine which blocks are in use and scanning all the other snapshots so as to be able to expunge their blocks from the view of the current snapshot. The bitmap scanning is broken into two passes. Before suspending the filesystem all bitmaps are scanned. After the suspension, those bitmaps that changed after being scanned the first time are rescanned. Typically there are few bitmaps that need to be rescanned. The expunging of other snapshots is now done after the suspension is released by observing that we can easily identify any blocks that were allocated to them after the suspension (they will be maked as `not needing to be copied' in the just created snapshot). For all the gory details, see the ``Running fsck in the Background'' paper in the Usenix BSDCon 2002 Conference Proceedings, pages 55-64.
2001-12-14 00:15:06 +00:00
* Identify a set of blocks allocated in a snapshot inode.
Add snapshots to the fast filesystem. Most of the changes support the gating of system calls that cause modifications to the underlying filesystem. The gating can be enabled by any filesystem that needs to consistently suspend operations by adding the vop_stdgetwritemount to their set of vnops. Once gating is enabled, the function vfs_write_suspend stops all new write operations to a filesystem, allows any filesystem modifying system calls already in progress to complete, then sync's the filesystem to disk and returns. The function vfs_write_resume allows the suspended write operations to begin again. Gating is not added by default for all filesystems as for SMP systems it adds two extra locks to such critical kernel paths as the write system call. Thus, gating should only be added as needed. Details on the use and current status of snapshots in FFS can be found in /sys/ufs/ffs/README.snapshot so for brevity and timelyness is not included here. Unless and until you create a snapshot file, these changes should have no effect on your system (famous last words).
2000-07-11 22:07:57 +00:00
*/
static int
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
snapacct_ufs2(vp, oldblkp, lastblkp, fs, lblkno, expungetype)
Add snapshots to the fast filesystem. Most of the changes support the gating of system calls that cause modifications to the underlying filesystem. The gating can be enabled by any filesystem that needs to consistently suspend operations by adding the vop_stdgetwritemount to their set of vnops. Once gating is enabled, the function vfs_write_suspend stops all new write operations to a filesystem, allows any filesystem modifying system calls already in progress to complete, then sync's the filesystem to disk and returns. The function vfs_write_resume allows the suspended write operations to begin again. Gating is not added by default for all filesystems as for SMP systems it adds two extra locks to such critical kernel paths as the write system call. Thus, gating should only be added as needed. Details on the use and current status of snapshots in FFS can be found in /sys/ufs/ffs/README.snapshot so for brevity and timelyness is not included here. Unless and until you create a snapshot file, these changes should have no effect on your system (famous last words).
2000-07-11 22:07:57 +00:00
struct vnode *vp;
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
ufs2_daddr_t *oldblkp, *lastblkp;
Refinement to revision 1.16 of ufs/ffs/ffs_snapshot.c to reduce the amount of time that the filesystem must be suspended. The current snapshot is elided as well as the earlier snapshots.
2001-05-04 05:49:28 +00:00
struct fs *fs;
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
ufs_lbn_t lblkno;
When taking a snapshot, we must check for active files that have been unlinked (e.g., with a zero link count). We have to expunge all trace of these files from the snapshot so that they are neither reclaimed prematurely by fsck nor saved unnecessarily by dump.
2002-02-02 01:42:44 +00:00
int expungetype; /* BLK_SNAP or BLK_NOCOPY */
Add snapshots to the fast filesystem. Most of the changes support the gating of system calls that cause modifications to the underlying filesystem. The gating can be enabled by any filesystem that needs to consistently suspend operations by adding the vop_stdgetwritemount to their set of vnops. Once gating is enabled, the function vfs_write_suspend stops all new write operations to a filesystem, allows any filesystem modifying system calls already in progress to complete, then sync's the filesystem to disk and returns. The function vfs_write_resume allows the suspended write operations to begin again. Gating is not added by default for all filesystems as for SMP systems it adds two extra locks to such critical kernel paths as the write system call. Thus, gating should only be added as needed. Details on the use and current status of snapshots in FFS can be found in /sys/ufs/ffs/README.snapshot so for brevity and timelyness is not included here. Unless and until you create a snapshot file, these changes should have no effect on your system (famous last words).
2000-07-11 22:07:57 +00:00
{
struct inode *ip = VTOI(vp);
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
ufs2_daddr_t blkno, *blkp;
ufs_lbn_t lbn;
Add snapshots to the fast filesystem. Most of the changes support the gating of system calls that cause modifications to the underlying filesystem. The gating can be enabled by any filesystem that needs to consistently suspend operations by adding the vop_stdgetwritemount to their set of vnops. Once gating is enabled, the function vfs_write_suspend stops all new write operations to a filesystem, allows any filesystem modifying system calls already in progress to complete, then sync's the filesystem to disk and returns. The function vfs_write_resume allows the suspended write operations to begin again. Gating is not added by default for all filesystems as for SMP systems it adds two extra locks to such critical kernel paths as the write system call. Thus, gating should only be added as needed. Details on the use and current status of snapshots in FFS can be found in /sys/ufs/ffs/README.snapshot so for brevity and timelyness is not included here. Unless and until you create a snapshot file, these changes should have no effect on your system (famous last words).
2000-07-11 22:07:57 +00:00
struct buf *ibp;
int error;
for ( ; oldblkp < lastblkp; oldblkp++) {
blkno = *oldblkp;
if (blkno == 0 || blkno == BLK_NOCOPY || blkno == BLK_SNAP)
continue;
lbn = fragstoblks(fs, blkno);
if (lbn < NDADDR) {
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
blkp = &ip->i_din2->di_db[lbn];
Add snapshots to the fast filesystem. Most of the changes support the gating of system calls that cause modifications to the underlying filesystem. The gating can be enabled by any filesystem that needs to consistently suspend operations by adding the vop_stdgetwritemount to their set of vnops. Once gating is enabled, the function vfs_write_suspend stops all new write operations to a filesystem, allows any filesystem modifying system calls already in progress to complete, then sync's the filesystem to disk and returns. The function vfs_write_resume allows the suspended write operations to begin again. Gating is not added by default for all filesystems as for SMP systems it adds two extra locks to such critical kernel paths as the write system call. Thus, gating should only be added as needed. Details on the use and current status of snapshots in FFS can be found in /sys/ufs/ffs/README.snapshot so for brevity and timelyness is not included here. Unless and until you create a snapshot file, these changes should have no effect on your system (famous last words).
2000-07-11 22:07:57 +00:00
ip->i_flag |= IN_CHANGE | IN_UPDATE;
} else {
Don't use the UFS_* and VFS_* functions where a direct call is possble. The UFS_ functions are for UFS to call back into VFS. The VFS functions are external entry points into the filesystem.
2005-02-08 17:40:01 +00:00
error = ffs_balloc_ufs2(vp, lblktosize(fs, (off_t)lbn),
Rename the BALLOC flags from B_* to BA_* to avoid confusion with the struct buf B_ flags. Approved by: mckusick
2002-06-23 06:12:22 +00:00
fs->fs_bsize, KERNCRED, BA_METAONLY, &ibp);
Add snapshots to the fast filesystem. Most of the changes support the gating of system calls that cause modifications to the underlying filesystem. The gating can be enabled by any filesystem that needs to consistently suspend operations by adding the vop_stdgetwritemount to their set of vnops. Once gating is enabled, the function vfs_write_suspend stops all new write operations to a filesystem, allows any filesystem modifying system calls already in progress to complete, then sync's the filesystem to disk and returns. The function vfs_write_resume allows the suspended write operations to begin again. Gating is not added by default for all filesystems as for SMP systems it adds two extra locks to such critical kernel paths as the write system call. Thus, gating should only be added as needed. Details on the use and current status of snapshots in FFS can be found in /sys/ufs/ffs/README.snapshot so for brevity and timelyness is not included here. Unless and until you create a snapshot file, these changes should have no effect on your system (famous last words).
2000-07-11 22:07:57 +00:00
if (error)
return (error);
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
blkp = &((ufs2_daddr_t *)(ibp->b_data))
Add snapshots to the fast filesystem. Most of the changes support the gating of system calls that cause modifications to the underlying filesystem. The gating can be enabled by any filesystem that needs to consistently suspend operations by adding the vop_stdgetwritemount to their set of vnops. Once gating is enabled, the function vfs_write_suspend stops all new write operations to a filesystem, allows any filesystem modifying system calls already in progress to complete, then sync's the filesystem to disk and returns. The function vfs_write_resume allows the suspended write operations to begin again. Gating is not added by default for all filesystems as for SMP systems it adds two extra locks to such critical kernel paths as the write system call. Thus, gating should only be added as needed. Details on the use and current status of snapshots in FFS can be found in /sys/ufs/ffs/README.snapshot so for brevity and timelyness is not included here. Unless and until you create a snapshot file, these changes should have no effect on your system (famous last words).
2000-07-11 22:07:57 +00:00
[(lbn - NDADDR) % NINDIR(fs)];
}
Minimize the time necessary to suspend operations on a filesystem when taking a snapshot. The two time consuming operations are scanning all the filesystem bitmaps to determine which blocks are in use and scanning all the other snapshots so as to be able to expunge their blocks from the view of the current snapshot. The bitmap scanning is broken into two passes. Before suspending the filesystem all bitmaps are scanned. After the suspension, those bitmaps that changed after being scanned the first time are rescanned. Typically there are few bitmaps that need to be rescanned. The expunging of other snapshots is now done after the suspension is released by observing that we can easily identify any blocks that were allocated to them after the suspension (they will be maked as `not needing to be copied' in the just created snapshot). For all the gory details, see the ``Running fsck in the Background'' paper in the Usenix BSDCon 2002 Conference Proceedings, pages 55-64.
2001-12-14 00:15:06 +00:00
/*
When taking a snapshot, we must check for active files that have been unlinked (e.g., with a zero link count). We have to expunge all trace of these files from the snapshot so that they are neither reclaimed prematurely by fsck nor saved unnecessarily by dump.
2002-02-02 01:42:44 +00:00
* If we are expunging a snapshot vnode and we
* find a block marked BLK_NOCOPY, then it is
Minimize the time necessary to suspend operations on a filesystem when taking a snapshot. The two time consuming operations are scanning all the filesystem bitmaps to determine which blocks are in use and scanning all the other snapshots so as to be able to expunge their blocks from the view of the current snapshot. The bitmap scanning is broken into two passes. Before suspending the filesystem all bitmaps are scanned. After the suspension, those bitmaps that changed after being scanned the first time are rescanned. Typically there are few bitmaps that need to be rescanned. The expunging of other snapshots is now done after the suspension is released by observing that we can easily identify any blocks that were allocated to them after the suspension (they will be maked as `not needing to be copied' in the just created snapshot). For all the gory details, see the ``Running fsck in the Background'' paper in the Usenix BSDCon 2002 Conference Proceedings, pages 55-64.
2001-12-14 00:15:06 +00:00
* one that has been allocated to this snapshot after
* we took our current snapshot and can be ignored.
*/
When taking a snapshot, we must check for active files that have been unlinked (e.g., with a zero link count). We have to expunge all trace of these files from the snapshot so that they are neither reclaimed prematurely by fsck nor saved unnecessarily by dump.
2002-02-02 01:42:44 +00:00
if (expungetype == BLK_SNAP && *blkp == BLK_NOCOPY) {
Minimize the time necessary to suspend operations on a filesystem when taking a snapshot. The two time consuming operations are scanning all the filesystem bitmaps to determine which blocks are in use and scanning all the other snapshots so as to be able to expunge their blocks from the view of the current snapshot. The bitmap scanning is broken into two passes. Before suspending the filesystem all bitmaps are scanned. After the suspension, those bitmaps that changed after being scanned the first time are rescanned. Typically there are few bitmaps that need to be rescanned. The expunging of other snapshots is now done after the suspension is released by observing that we can easily identify any blocks that were allocated to them after the suspension (they will be maked as `not needing to be copied' in the just created snapshot). For all the gory details, see the ``Running fsck in the Background'' paper in the Usenix BSDCon 2002 Conference Proceedings, pages 55-64.
2001-12-14 00:15:06 +00:00
if (lbn >= NDADDR)
brelse(ibp);
} else {
if (*blkp != 0)
When expunging unlinked files from a snapshot, skip over holes in the file rather than panicing with "indiracct: botched params". Submitted by: Mark Santcroos <marks@ripe.net>
2003-10-17 13:57:58 +00:00
panic("snapacct_ufs2: bad block");
When taking a snapshot, we must check for active files that have been unlinked (e.g., with a zero link count). We have to expunge all trace of these files from the snapshot so that they are neither reclaimed prematurely by fsck nor saved unnecessarily by dump.
2002-02-02 01:42:44 +00:00
*blkp = expungetype;
Minimize the time necessary to suspend operations on a filesystem when taking a snapshot. The two time consuming operations are scanning all the filesystem bitmaps to determine which blocks are in use and scanning all the other snapshots so as to be able to expunge their blocks from the view of the current snapshot. The bitmap scanning is broken into two passes. Before suspending the filesystem all bitmaps are scanned. After the suspension, those bitmaps that changed after being scanned the first time are rescanned. Typically there are few bitmaps that need to be rescanned. The expunging of other snapshots is now done after the suspension is released by observing that we can easily identify any blocks that were allocated to them after the suspension (they will be maked as `not needing to be copied' in the just created snapshot). For all the gory details, see the ``Running fsck in the Background'' paper in the Usenix BSDCon 2002 Conference Proceedings, pages 55-64.
2001-12-14 00:15:06 +00:00
if (lbn >= NDADDR)
bdwrite(ibp);
This patch corrects the first round of panics and hangs reported with the new snapshot code. Update addaliasu to correctly implement the semantics of the old checkalias function. When a device vnode first comes into existence, check to see if an anonymous vnode for the same device was created at boot time by bdevvp(). If so, adopt the bdevvp vnode rather than creating a new vnode for the device. This corrects a problem which caused the kernel to panic when taking a snapshot of the root filesystem. Change the calling convention of vn_write_suspend_wait() to be the same as vn_start_write(). Split out softdep_flushworklist() from softdep_flushfiles() so that it can be used to clear the work queue when suspending filesystem operations. Access to buffers becomes recursive so that snapshots can recursively traverse their indirect blocks using ffs_copyonwrite() when checking for the need for copy on write when flushing one of their own indirect blocks. This eliminates a deadlock between the syncer daemon and a process taking a snapshot. Ensure that softdep_process_worklist() can never block because of a snapshot being taken. This eliminates a problem with buffer starvation. Cleanup change in ffs_sync() which did not synchronously wait when MNT_WAIT was specified. The result was an unclean filesystem panic when doing forcible unmount with heavy filesystem I/O in progress. Return a zero'ed block when reading a block that was not in use at the time that a snapshot was taken. Normally, these blocks should never be read. However, the readahead code will occationally read them which can cause unexpected behavior. Clean up the debugging code that ensures that no blocks be written on a filesystem while it is suspended. Snapshots must explicitly label the blocks that they are writing during the suspension so that they do not cause a `write on suspended filesystem' panic. Reorganize ffs_copyonwrite() to eliminate a deadlock and also to prevent a race condition that would permit the same block to be copied twice. This change eliminates an unexpected soft updates inconsistency in fsck caused by the double allocation. Use bqrelse rather than brelse for buffers that will be needed soon again by the snapshot code. This improves snapshot performance.
2000-07-24 05:28:33 +00:00
}
Add snapshots to the fast filesystem. Most of the changes support the gating of system calls that cause modifications to the underlying filesystem. The gating can be enabled by any filesystem that needs to consistently suspend operations by adding the vop_stdgetwritemount to their set of vnops. Once gating is enabled, the function vfs_write_suspend stops all new write operations to a filesystem, allows any filesystem modifying system calls already in progress to complete, then sync's the filesystem to disk and returns. The function vfs_write_resume allows the suspended write operations to begin again. Gating is not added by default for all filesystems as for SMP systems it adds two extra locks to such critical kernel paths as the write system call. Thus, gating should only be added as needed. Details on the use and current status of snapshots in FFS can be found in /sys/ufs/ffs/README.snapshot so for brevity and timelyness is not included here. Unless and until you create a snapshot file, these changes should have no effect on your system (famous last words).
2000-07-11 22:07:57 +00:00
}
return (0);
}
Refinement to revision 1.16 of ufs/ffs/ffs_snapshot.c to reduce the amount of time that the filesystem must be suspended. The current snapshot is elided as well as the earlier snapshots.
2001-05-04 05:49:28 +00:00
/*
* Account for a set of blocks allocated in a snapshot inode.
*/
static int
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
mapacct_ufs2(vp, oldblkp, lastblkp, fs, lblkno, expungetype)
Refinement to revision 1.16 of ufs/ffs/ffs_snapshot.c to reduce the amount of time that the filesystem must be suspended. The current snapshot is elided as well as the earlier snapshots.
2001-05-04 05:49:28 +00:00
struct vnode *vp;
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
ufs2_daddr_t *oldblkp, *lastblkp;
Refinement to revision 1.16 of ufs/ffs/ffs_snapshot.c to reduce the amount of time that the filesystem must be suspended. The current snapshot is elided as well as the earlier snapshots.
2001-05-04 05:49:28 +00:00
struct fs *fs;
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
ufs_lbn_t lblkno;
When taking a snapshot, we must check for active files that have been unlinked (e.g., with a zero link count). We have to expunge all trace of these files from the snapshot so that they are neither reclaimed prematurely by fsck nor saved unnecessarily by dump.
2002-02-02 01:42:44 +00:00
int expungetype;
Refinement to revision 1.16 of ufs/ffs/ffs_snapshot.c to reduce the amount of time that the filesystem must be suspended. The current snapshot is elided as well as the earlier snapshots.
2001-05-04 05:49:28 +00:00
{
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
ufs2_daddr_t blkno;
When creating a snapshot, create a list of initially allocated blocks. Whenever doing a copy-on-write check, first look in the list of initially allocated blocks to see if it is there. If so, no further check is needed. If not, fall through and do the full check. This change eliminates one of two known deadlocks caused by snapshots. Handling the second deadlock will be the subject of another check-in. This change also reduces the cost of the copy-on-write check by speeding up the verification of frequently checked blocks. Sponsored by: DARPA & NAI Labs.
2002-10-09 06:13:48 +00:00
struct inode *ip;
When taking a snapshot, we must check for active files that have been unlinked (e.g., with a zero link count). We have to expunge all trace of these files from the snapshot so that they are neither reclaimed prematurely by fsck nor saved unnecessarily by dump.
2002-02-02 01:42:44 +00:00
ino_t inum;
Fix corruption introduced in previous delta. Reported by: Aurelien Nephtali <aurelien.nephtali@wanadoo.fr> Sponsored by: DARPA & NAI Labs.
2002-12-18 19:50:28 +00:00
int acctit;
Refinement to revision 1.16 of ufs/ffs/ffs_snapshot.c to reduce the amount of time that the filesystem must be suspended. The current snapshot is elided as well as the earlier snapshots.
2001-05-04 05:49:28 +00:00
When creating a snapshot, create a list of initially allocated blocks. Whenever doing a copy-on-write check, first look in the list of initially allocated blocks to see if it is there. If so, no further check is needed. If not, fall through and do the full check. This change eliminates one of two known deadlocks caused by snapshots. Handling the second deadlock will be the subject of another check-in. This change also reduces the cost of the copy-on-write check by speeding up the verification of frequently checked blocks. Sponsored by: DARPA & NAI Labs.
2002-10-09 06:13:48 +00:00
ip = VTOI(vp);
inum = ip->i_number;
Fix corruption introduced in previous delta. Reported by: Aurelien Nephtali <aurelien.nephtali@wanadoo.fr> Sponsored by: DARPA & NAI Labs.
2002-12-18 19:50:28 +00:00
if (lblkno == -1)
acctit = 0;
else
acctit = 1;
Refinement to revision 1.16 of ufs/ffs/ffs_snapshot.c to reduce the amount of time that the filesystem must be suspended. The current snapshot is elided as well as the earlier snapshots.
2001-05-04 05:49:28 +00:00
for ( ; oldblkp < lastblkp; oldblkp++, lblkno++) {
blkno = *oldblkp;
if (blkno == 0 || blkno == BLK_NOCOPY)
continue;
Fix corruption introduced in previous delta. Reported by: Aurelien Nephtali <aurelien.nephtali@wanadoo.fr> Sponsored by: DARPA & NAI Labs.
2002-12-18 19:50:28 +00:00
if (acctit && expungetype == BLK_SNAP && blkno != BLK_SNAP)
Update to previous change (1.54) to use an approperly wide inode field so as to work correctly on 64-bit platforms. Reported-by: Jake Burkholder <jake@locore.ca> Sponsored by: DARPA & NAI Labs. Approved by: Ian Dowse <iedowse@maths.tcd.ie>
2002-12-15 19:25:59 +00:00
*ip->i_snapblklist++ = lblkno;
Refinement to revision 1.16 of ufs/ffs/ffs_snapshot.c to reduce the amount of time that the filesystem must be suspended. The current snapshot is elided as well as the earlier snapshots.
2001-05-04 05:49:28 +00:00
if (blkno == BLK_SNAP)
blkno = blkstofrags(fs, lblkno);
Ensure that filesystem metadata contained within persistent snapshots is always kept consistent. Suggested by: Jeff Roberson
2011-06-15 23:19:09 +00:00
ffs_blkfree(ip->i_ump, fs, vp, blkno, fs->fs_bsize, inum,
vp->v_type, NULL);
Refinement to revision 1.16 of ufs/ffs/ffs_snapshot.c to reduce the amount of time that the filesystem must be suspended. The current snapshot is elided as well as the earlier snapshots.
2001-05-04 05:49:28 +00:00
}
return (0);
}
Several small but important fixes for snapshots: 1) Be more tolerant of missing snapshot files by only trying to decrement their reference count if they are registered as active. 2) Fix for snapshots of filesystems with block sizes larger than 8K (from Ollivier Robert <roberto@eurocontrol.fr>). 3) Fix to avoid losing last block in snapshot file when calculating blocks that need to be copied (from Don Coleman <coleman@coleman.org>).
2000-12-19 04:41:09 +00:00
/*
* Decrement extra reference on snapshot when last name is removed.
* It will not be freed until the last open reference goes away.
*/
void
ffs_snapgone(ip)
struct inode *ip;
{
struct inode *xp;
Clear the fs_clean flag only when the FS_UNCLEAN flag is not set (as is done in unmount). Remove a snapshot inode from the superblock list when its last name goes away rather than when its last reference goes away. That way it will be properly reclaimed by fsck after a crash rather than reenabled when the filesystem is mounted.
2001-03-21 04:05:20 +00:00
struct fs *fs;
int snaploc;
Create struct snapdata which contains the snapshot fields from cdev and the previously malloc'ed snapshot lock. Malloc struct snapdata instead of just the lock. Replace snapshot fields in cdev with pointer to snapdata (saves 16 bytes). While here, give the private readblock() function a vnode argument in preparation for moving UFS to access GEOM directly.
2004-09-13 07:29:45 +00:00
struct snapdata *sn;
- Use the ufs lock to protect fs_active. Sponsored By: Isilon Systems, Inc.
2005-01-24 10:10:11 +00:00
struct ufsmount *ump;
Several small but important fixes for snapshots: 1) Be more tolerant of missing snapshot files by only trying to decrement their reference count if they are registered as active. 2) Fix for snapshots of filesystems with block sizes larger than 8K (from Ollivier Robert <roberto@eurocontrol.fr>). 3) Fix to avoid losing last block in snapshot file when calculating blocks that need to be copied (from Don Coleman <coleman@coleman.org>).
2000-12-19 04:41:09 +00:00
/*
* Find snapshot in incore list.
*/
Create struct snapdata which contains the snapshot fields from cdev and the previously malloc'ed snapshot lock. Malloc struct snapdata instead of just the lock. Replace snapshot fields in cdev with pointer to snapdata (saves 16 bytes). While here, give the private readblock() function a vnode argument in preparation for moving UFS to access GEOM directly.
2004-09-13 07:29:45 +00:00
xp = NULL;
sn = ip->i_devvp->v_rdev->si_snapdata;
if (sn != NULL)
TAILQ_FOREACH(xp, &sn->sn_head, i_nextsnap)
if (xp == ip)
break;
Only the most recent snapshot contains the complete list of blocks that were copied in all of the earlier snapshots, thus its precomputed list must be used in the copyonwrite test. Using incomplete lists may lead to deadlock. Also do not include the blocks used for the indirect pointers in the indirect pointers as this may lead to inconsistent snapshots. Sponsored by: DARPA & NAI Labs. Approved by: re
2002-12-14 01:36:59 +00:00
if (xp != NULL)
vrele(ITOV(ip));
else if (snapdebug)
Fix up kernel sources to be ready for a 64-bit ino_t. Original code by: Gleb Kurtsou
2012-09-27 23:30:49 +00:00
printf("ffs_snapgone: lost snapshot vnode %ju\n",
(uintmax_t)ip->i_number);
Clear the fs_clean flag only when the FS_UNCLEAN flag is not set (as is done in unmount). Remove a snapshot inode from the superblock list when its last name goes away rather than when its last reference goes away. That way it will be properly reclaimed by fsck after a crash rather than reenabled when the filesystem is mounted.
2001-03-21 04:05:20 +00:00
/*
* Delete snapshot inode from superblock. Keep list dense.
*/
fs = ip->i_fs;
- Use the ufs lock to protect fs_active. Sponsored By: Isilon Systems, Inc.
2005-01-24 10:10:11 +00:00
ump = ip->i_ump;
UFS_LOCK(ump);
Clear the fs_clean flag only when the FS_UNCLEAN flag is not set (as is done in unmount). Remove a snapshot inode from the superblock list when its last name goes away rather than when its last reference goes away. That way it will be properly reclaimed by fsck after a crash rather than reenabled when the filesystem is mounted.
2001-03-21 04:05:20 +00:00
for (snaploc = 0; snaploc < FSMAXSNAP; snaploc++)
if (fs->fs_snapinum[snaploc] == ip->i_number)
break;
if (snaploc < FSMAXSNAP) {
for (snaploc++; snaploc < FSMAXSNAP; snaploc++) {
if (fs->fs_snapinum[snaploc] == 0)
break;
fs->fs_snapinum[snaploc - 1] = fs->fs_snapinum[snaploc];
}
fs->fs_snapinum[snaploc - 1] = 0;
}
- Use the ufs lock to protect fs_active. Sponsored By: Isilon Systems, Inc.
2005-01-24 10:10:11 +00:00
UFS_UNLOCK(ump);
Several small but important fixes for snapshots: 1) Be more tolerant of missing snapshot files by only trying to decrement their reference count if they are registered as active. 2) Fix for snapshots of filesystems with block sizes larger than 8K (from Ollivier Robert <roberto@eurocontrol.fr>). 3) Fix to avoid losing last block in snapshot file when calculating blocks that need to be copied (from Don Coleman <coleman@coleman.org>).
2000-12-19 04:41:09 +00:00
}
Add snapshots to the fast filesystem. Most of the changes support the gating of system calls that cause modifications to the underlying filesystem. The gating can be enabled by any filesystem that needs to consistently suspend operations by adding the vop_stdgetwritemount to their set of vnops. Once gating is enabled, the function vfs_write_suspend stops all new write operations to a filesystem, allows any filesystem modifying system calls already in progress to complete, then sync's the filesystem to disk and returns. The function vfs_write_resume allows the suspended write operations to begin again. Gating is not added by default for all filesystems as for SMP systems it adds two extra locks to such critical kernel paths as the write system call. Thus, gating should only be added as needed. Details on the use and current status of snapshots in FFS can be found in /sys/ufs/ffs/README.snapshot so for brevity and timelyness is not included here. Unless and until you create a snapshot file, these changes should have no effect on your system (famous last words).
2000-07-11 22:07:57 +00:00
/*
* Prepare a snapshot file for being removed.
*/
void
ffs_snapremove(vp)
struct vnode *vp;
{
Fixes to track snapshot copy-on-write checking in the specinfo structure rather than assuming that the device vnode would reside in the FFS filesystem (which is obviously a broken assumption with the device filesystem).
2001-03-07 07:09:55 +00:00
struct inode *ip;
Add snapshots to the fast filesystem. Most of the changes support the gating of system calls that cause modifications to the underlying filesystem. The gating can be enabled by any filesystem that needs to consistently suspend operations by adding the vop_stdgetwritemount to their set of vnops. Once gating is enabled, the function vfs_write_suspend stops all new write operations to a filesystem, allows any filesystem modifying system calls already in progress to complete, then sync's the filesystem to disk and returns. The function vfs_write_resume allows the suspended write operations to begin again. Gating is not added by default for all filesystems as for SMP systems it adds two extra locks to such critical kernel paths as the write system call. Thus, gating should only be added as needed. Details on the use and current status of snapshots in FFS can be found in /sys/ufs/ffs/README.snapshot so for brevity and timelyness is not included here. Unless and until you create a snapshot file, these changes should have no effect on your system (famous last words).
2000-07-11 22:07:57 +00:00
struct vnode *devvp;
struct buf *ibp;
struct fs *fs;
Close a race when VOP_LOCK() on a snapshot file is attempted at the same time as it is changed back into a normal file. The locker would get the shared "snaplk" lock which would no longer be the correct lock for the vnode.
2006-05-02 23:52:43 +00:00
ufs2_daddr_t numblks, blkno, dblk;
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
int error, loc, last;
Create struct snapdata which contains the snapshot fields from cdev and the previously malloc'ed snapshot lock. Malloc struct snapdata instead of just the lock. Replace snapshot fields in cdev with pointer to snapdata (saves 16 bytes). While here, give the private readblock() function a vnode argument in preparation for moving UFS to access GEOM directly.
2004-09-13 07:29:45 +00:00
struct snapdata *sn;
Add snapshots to the fast filesystem. Most of the changes support the gating of system calls that cause modifications to the underlying filesystem. The gating can be enabled by any filesystem that needs to consistently suspend operations by adding the vop_stdgetwritemount to their set of vnops. Once gating is enabled, the function vfs_write_suspend stops all new write operations to a filesystem, allows any filesystem modifying system calls already in progress to complete, then sync's the filesystem to disk and returns. The function vfs_write_resume allows the suspended write operations to begin again. Gating is not added by default for all filesystems as for SMP systems it adds two extra locks to such critical kernel paths as the write system call. Thus, gating should only be added as needed. Details on the use and current status of snapshots in FFS can be found in /sys/ufs/ffs/README.snapshot so for brevity and timelyness is not included here. Unless and until you create a snapshot file, these changes should have no effect on your system (famous last words).
2000-07-11 22:07:57 +00:00
ip = VTOI(vp);
fs = ip->i_fs;
Remove a race condition / deadlock from snapshots. When converting from individual vnode locks to the snapshot lock, be sure to pass any waiting processes along to the new lock as well. This transfer is done by a new function in the lock manager, transferlockers(from_lock, to_lock); Thanks to Lamont Granquist <lamont@scriptkiddie.org> for his help in pounding on snapshots beyond all reason and finding this deadlock. Sponsored by: DARPA & NAI Labs.
2002-11-30 19:00:51 +00:00
devvp = ip->i_devvp;
Add snapshots to the fast filesystem. Most of the changes support the gating of system calls that cause modifications to the underlying filesystem. The gating can be enabled by any filesystem that needs to consistently suspend operations by adding the vop_stdgetwritemount to their set of vnops. Once gating is enabled, the function vfs_write_suspend stops all new write operations to a filesystem, allows any filesystem modifying system calls already in progress to complete, then sync's the filesystem to disk and returns. The function vfs_write_resume allows the suspended write operations to begin again. Gating is not added by default for all filesystems as for SMP systems it adds two extra locks to such critical kernel paths as the write system call. Thus, gating should only be added as needed. Details on the use and current status of snapshots in FFS can be found in /sys/ufs/ffs/README.snapshot so for brevity and timelyness is not included here. Unless and until you create a snapshot file, these changes should have no effect on your system (famous last words).
2000-07-11 22:07:57 +00:00
/*
When closing the last reference to an unlinked file, it is freed by the inactive routine. Because the freeing causes the filesystem to be modified, the close must be held up during periods when the filesystem is suspended. For snapshots to be consistent across crashes, they must write blocks that they copy and claim those written blocks in their on-disk block pointers before the old blocks that they referenced can be allowed to be written. Close a loophole that allowed unwritten blocks to be skipped when doing ffs_sync with a request to wait for all I/O activity to be completed.
2001-04-25 08:11:18 +00:00
* If active, delete from incore list (this snapshot may
* already have been in the process of being deleted, so
* would not have been active).
*
Add snapshots to the fast filesystem. Most of the changes support the gating of system calls that cause modifications to the underlying filesystem. The gating can be enabled by any filesystem that needs to consistently suspend operations by adding the vop_stdgetwritemount to their set of vnops. Once gating is enabled, the function vfs_write_suspend stops all new write operations to a filesystem, allows any filesystem modifying system calls already in progress to complete, then sync's the filesystem to disk and returns. The function vfs_write_resume allows the suspended write operations to begin again. Gating is not added by default for all filesystems as for SMP systems it adds two extra locks to such critical kernel paths as the write system call. Thus, gating should only be added as needed. Details on the use and current status of snapshots in FFS can be found in /sys/ufs/ffs/README.snapshot so for brevity and timelyness is not included here. Unless and until you create a snapshot file, these changes should have no effect on your system (famous last words).
2000-07-11 22:07:57 +00:00
* Clear copy-on-write flag if last snapshot.
*/
Close a race when VOP_LOCK() on a snapshot file is attempted at the same time as it is changed back into a normal file. The locker would get the shared "snaplk" lock which would no longer be the correct lock for the vnode.
2006-05-02 23:52:43 +00:00
VI_LOCK(devvp);
When closing the last reference to an unlinked file, it is freed by the inactive routine. Because the freeing causes the filesystem to be modified, the close must be held up during periods when the filesystem is suspended. For snapshots to be consistent across crashes, they must write blocks that they copy and claim those written blocks in their on-disk block pointers before the old blocks that they referenced can be allowed to be written. Close a loophole that allowed unwritten blocks to be skipped when doing ffs_sync with a request to wait for all I/O activity to be completed.
2001-04-25 08:11:18 +00:00
if (ip->i_nextsnap.tqe_prev != 0) {
Close a race when VOP_LOCK() on a snapshot file is attempted at the same time as it is changed back into a normal file. The locker would get the shared "snaplk" lock which would no longer be the correct lock for the vnode.
2006-05-02 23:52:43 +00:00
sn = devvp->v_rdev->si_snapdata;
Create struct snapdata which contains the snapshot fields from cdev and the previously malloc'ed snapshot lock. Malloc struct snapdata instead of just the lock. Replace snapshot fields in cdev with pointer to snapdata (saves 16 bytes). While here, give the private readblock() function a vnode argument in preparation for moving UFS to access GEOM directly.
2004-09-13 07:29:45 +00:00
TAILQ_REMOVE(&sn->sn_head, ip, i_nextsnap);
Fixes to track snapshot copy-on-write checking in the specinfo structure rather than assuming that the device vnode would reside in the FFS filesystem (which is obviously a broken assumption with the device filesystem).
2001-03-07 07:09:55 +00:00
ip->i_nextsnap.tqe_prev = 0;
Close a race when VOP_LOCK() on a snapshot file is attempted at the same time as it is changed back into a normal file. The locker would get the shared "snaplk" lock which would no longer be the correct lock for the vnode.
2006-05-02 23:52:43 +00:00
VI_UNLOCK(devvp);
Cleanup lockmgr interface and exported KPI: - Remove the "thread" argument from the lockmgr() function as it is always curthread now - Axe lockcount() function as it is no longer used - Axe LOCKMGR_ASSERT() as it is bogus really and no currently used. Hopefully this will be soonly replaced by something suitable for it. - Remove the prototype for dumplockinfo() as the function is no longer present Addictionally: - Introduce a KASSERT() in lockstatus() in order to let it accept only curthread or NULL as they should only be passed - Do a little bit of style(9) cleanup on lockmgr.h KPI results heavilly broken by this change, so manpages and FreeBSD_version will be modified accordingly by further commits. Tested by: matteo
2008-01-24 12:34:30 +00:00
lockmgr(&vp->v_lock, LK_EXCLUSIVE, NULL);
Close a race when VOP_LOCK() on a snapshot file is attempted at the same time as it is changed back into a normal file. The locker would get the shared "snaplk" lock which would no longer be the correct lock for the vnode.
2006-05-02 23:52:43 +00:00
KASSERT(vp->v_vnlock == &sn->sn_lock,
("ffs_snapremove: lost lock mutation"));
Remove a race condition / deadlock from snapshots. When converting from individual vnode locks to the snapshot lock, be sure to pass any waiting processes along to the new lock as well. This transfer is done by a new function in the lock manager, transferlockers(from_lock, to_lock); Thanks to Lamont Granquist <lamont@scriptkiddie.org> for his help in pounding on snapshots beyond all reason and finding this deadlock. Sponsored by: DARPA & NAI Labs.
2002-11-30 19:00:51 +00:00
vp->v_vnlock = &vp->v_lock;
Close a race when VOP_LOCK() on a snapshot file is attempted at the same time as it is changed back into a normal file. The locker would get the shared "snaplk" lock which would no longer be the correct lock for the vnode.
2006-05-02 23:52:43 +00:00
VI_LOCK(devvp);
Cleanup lockmgr interface and exported KPI: - Remove the "thread" argument from the lockmgr() function as it is always curthread now - Axe lockcount() function as it is no longer used - Axe LOCKMGR_ASSERT() as it is bogus really and no currently used. Hopefully this will be soonly replaced by something suitable for it. - Remove the prototype for dumplockinfo() as the function is no longer present Addictionally: - Introduce a KASSERT() in lockstatus() in order to let it accept only curthread or NULL as they should only be passed - Do a little bit of style(9) cleanup on lockmgr.h KPI results heavilly broken by this change, so manpages and FreeBSD_version will be modified accordingly by further commits. Tested by: matteo
2008-01-24 12:34:30 +00:00
lockmgr(&sn->sn_lock, LK_RELEASE, NULL);
- Don't free snapdata structures when they are no longer in use. Keeping the lockmgr lock valid allows us to switch the v_lock pointer in snapshot vnodes between the embedded lockmgr lock and snapdata lock without needing the vnode interlock to protect against races - Keep unused snapdata structures in a list. - Add a function to lock the devvp and allocate a snapdata to it or acquire a new one without races. The old function was safe from creation races because we set the mount flag when creating snapshots and thus serializing them. However, it might have been subject to destroying races. Reviewed by: tegge
2008-03-31 07:47:08 +00:00
try_free_snapdata(devvp);
Close a race when VOP_LOCK() on a snapshot file is attempted at the same time as it is changed back into a normal file. The locker would get the shared "snaplk" lock which would no longer be the correct lock for the vnode.
2006-05-02 23:52:43 +00:00
} else
VI_UNLOCK(devvp);
Add snapshots to the fast filesystem. Most of the changes support the gating of system calls that cause modifications to the underlying filesystem. The gating can be enabled by any filesystem that needs to consistently suspend operations by adding the vop_stdgetwritemount to their set of vnops. Once gating is enabled, the function vfs_write_suspend stops all new write operations to a filesystem, allows any filesystem modifying system calls already in progress to complete, then sync's the filesystem to disk and returns. The function vfs_write_resume allows the suspended write operations to begin again. Gating is not added by default for all filesystems as for SMP systems it adds two extra locks to such critical kernel paths as the write system call. Thus, gating should only be added as needed. Details on the use and current status of snapshots in FFS can be found in /sys/ufs/ffs/README.snapshot so for brevity and timelyness is not included here. Unless and until you create a snapshot file, these changes should have no effect on your system (famous last words).
2000-07-11 22:07:57 +00:00
/*
* Clear all BLK_NOCOPY fields. Pass any block claims to other
* snapshots that want them (see ffs_snapblkfree below).
*/
for (blkno = 1; blkno < NDADDR; blkno++) {
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
dblk = DIP(ip, i_db[blkno]);
Reduce the probability of low block numbers passed to ffs_snapblkfree() by skipping the call from ffs_snapremove() if the block number is zero. Simplify snapshot locking in ffs_copyonwrite() and ffs_snapblkfree() by using the same locking protocol for low block numbers as for larger block numbers. This removes a lock leak that could happen if vn_lock() succeeded after lockmgr() failed in ffs_snapblkfree(). Check if snapshot is gone before retrying a lock in ffs_copyonwrite().
2005-10-09 19:45:01 +00:00
if (dblk == 0)
continue;
Several fixes for units errors: 1) Do not assume that the superblock will be of size fs->fs_bsize. This fixes a panic when taking a snapshot on a filesystem with a block size bigger than 8K. 2) Properly calculate the number of fragments that follow the superblock summary information. This fixes a bug with inconsistent snapshots. 3) When cleaning up a snapshot that is about to be removed, properly calculate the number of blocks that need to be checked. This fixes a bug that created partially allocated inodes. 4) When moving blocks from a snapshot that is about to be removed to another snapshot, properly account for the reduced number of blocks in the snapshot from which they are taken. This fixes a bug in which the number of blocks released from a snapshot did not match the number that it claimed to have.
2001-05-08 07:29:03 +00:00
if (dblk == BLK_NOCOPY || dblk == BLK_SNAP)
Avoid using casts as lvalues. Introduce DIP_SET macro which sets proper inode field based on UFS version. Use DIP ro read values and DIP_SET to modify them throughout FFS code base.
2004-07-28 06:41:27 +00:00
DIP_SET(ip, i_db[blkno], 0);
Several fixes for units errors: 1) Do not assume that the superblock will be of size fs->fs_bsize. This fixes a panic when taking a snapshot on a filesystem with a block size bigger than 8K. 2) Properly calculate the number of fragments that follow the superblock summary information. This fixes a bug with inconsistent snapshots. 3) When cleaning up a snapshot that is about to be removed, properly calculate the number of blocks that need to be checked. This fixes a bug that created partially allocated inodes. 4) When moving blocks from a snapshot that is about to be removed to another snapshot, properly account for the reduced number of blocks in the snapshot from which they are taken. This fixes a bug in which the number of blocks released from a snapshot did not match the number that it claimed to have.
2001-05-08 07:29:03 +00:00
else if ((dblk == blkstofrags(fs, blkno) &&
When taking a snapshot, we must check for active files that have been unlinked (e.g., with a zero link count). We have to expunge all trace of these files from the snapshot so that they are neither reclaimed prematurely by fsck nor saved unnecessarily by dump.
2002-02-02 01:42:44 +00:00
ffs_snapblkfree(fs, ip->i_devvp, dblk, fs->fs_bsize,
Ensure that filesystem metadata contained within persistent snapshots is always kept consistent. Suggested by: Jeff Roberson
2011-06-15 23:19:09 +00:00
ip->i_number, vp->v_type, NULL))) {
Avoid using casts as lvalues. Introduce DIP_SET macro which sets proper inode field based on UFS version. Use DIP ro read values and DIP_SET to modify them throughout FFS code base.
2004-07-28 06:41:27 +00:00
DIP_SET(ip, i_blocks, DIP(ip, i_blocks) -
btodb(fs->fs_bsize));
DIP_SET(ip, i_db[blkno], 0);
Several fixes for units errors: 1) Do not assume that the superblock will be of size fs->fs_bsize. This fixes a panic when taking a snapshot on a filesystem with a block size bigger than 8K. 2) Properly calculate the number of fragments that follow the superblock summary information. This fixes a bug with inconsistent snapshots. 3) When cleaning up a snapshot that is about to be removed, properly calculate the number of blocks that need to be checked. This fixes a bug that created partially allocated inodes. 4) When moving blocks from a snapshot that is about to be removed to another snapshot, properly account for the reduced number of blocks in the snapshot from which they are taken. This fixes a bug in which the number of blocks released from a snapshot did not match the number that it claimed to have.
2001-05-08 07:29:03 +00:00
}
Add snapshots to the fast filesystem. Most of the changes support the gating of system calls that cause modifications to the underlying filesystem. The gating can be enabled by any filesystem that needs to consistently suspend operations by adding the vop_stdgetwritemount to their set of vnops. Once gating is enabled, the function vfs_write_suspend stops all new write operations to a filesystem, allows any filesystem modifying system calls already in progress to complete, then sync's the filesystem to disk and returns. The function vfs_write_resume allows the suspended write operations to begin again. Gating is not added by default for all filesystems as for SMP systems it adds two extra locks to such critical kernel paths as the write system call. Thus, gating should only be added as needed. Details on the use and current status of snapshots in FFS can be found in /sys/ufs/ffs/README.snapshot so for brevity and timelyness is not included here. Unless and until you create a snapshot file, these changes should have no effect on your system (famous last words).
2000-07-11 22:07:57 +00:00
}
Several fixes for units errors: 1) Do not assume that the superblock will be of size fs->fs_bsize. This fixes a panic when taking a snapshot on a filesystem with a block size bigger than 8K. 2) Properly calculate the number of fragments that follow the superblock summary information. This fixes a bug with inconsistent snapshots. 3) When cleaning up a snapshot that is about to be removed, properly calculate the number of blocks that need to be checked. This fixes a bug that created partially allocated inodes. 4) When moving blocks from a snapshot that is about to be removed to another snapshot, properly account for the reduced number of blocks in the snapshot from which they are taken. This fixes a bug in which the number of blocks released from a snapshot did not match the number that it claimed to have.
2001-05-08 07:29:03 +00:00
numblks = howmany(ip->i_size, fs->fs_bsize);
for (blkno = NDADDR; blkno < numblks; blkno += NINDIR(fs)) {
VOP_BALLOC was never really a VOP in the first place, so convert it to UFS_BALLOC like the other "between UFS and FFS function interfaces".
2001-04-29 12:36:52 +00:00
error = UFS_BALLOC(vp, lblktosize(fs, (off_t)blkno),
Rename the BALLOC flags from B_* to BA_* to avoid confusion with the struct buf B_ flags. Approved by: mckusick
2002-06-23 06:12:22 +00:00
fs->fs_bsize, KERNCRED, BA_METAONLY, &ibp);
Add snapshots to the fast filesystem. Most of the changes support the gating of system calls that cause modifications to the underlying filesystem. The gating can be enabled by any filesystem that needs to consistently suspend operations by adding the vop_stdgetwritemount to their set of vnops. Once gating is enabled, the function vfs_write_suspend stops all new write operations to a filesystem, allows any filesystem modifying system calls already in progress to complete, then sync's the filesystem to disk and returns. The function vfs_write_resume allows the suspended write operations to begin again. Gating is not added by default for all filesystems as for SMP systems it adds two extra locks to such critical kernel paths as the write system call. Thus, gating should only be added as needed. Details on the use and current status of snapshots in FFS can be found in /sys/ufs/ffs/README.snapshot so for brevity and timelyness is not included here. Unless and until you create a snapshot file, these changes should have no effect on your system (famous last words).
2000-07-11 22:07:57 +00:00
if (error)
continue;
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
if (fs->fs_size - blkno > NINDIR(fs))
Add snapshots to the fast filesystem. Most of the changes support the gating of system calls that cause modifications to the underlying filesystem. The gating can be enabled by any filesystem that needs to consistently suspend operations by adding the vop_stdgetwritemount to their set of vnops. Once gating is enabled, the function vfs_write_suspend stops all new write operations to a filesystem, allows any filesystem modifying system calls already in progress to complete, then sync's the filesystem to disk and returns. The function vfs_write_resume allows the suspended write operations to begin again. Gating is not added by default for all filesystems as for SMP systems it adds two extra locks to such critical kernel paths as the write system call. Thus, gating should only be added as needed. Details on the use and current status of snapshots in FFS can be found in /sys/ufs/ffs/README.snapshot so for brevity and timelyness is not included here. Unless and until you create a snapshot file, these changes should have no effect on your system (famous last words).
2000-07-11 22:07:57 +00:00
last = NINDIR(fs);
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
else
last = fs->fs_size - blkno;
Add snapshots to the fast filesystem. Most of the changes support the gating of system calls that cause modifications to the underlying filesystem. The gating can be enabled by any filesystem that needs to consistently suspend operations by adding the vop_stdgetwritemount to their set of vnops. Once gating is enabled, the function vfs_write_suspend stops all new write operations to a filesystem, allows any filesystem modifying system calls already in progress to complete, then sync's the filesystem to disk and returns. The function vfs_write_resume allows the suspended write operations to begin again. Gating is not added by default for all filesystems as for SMP systems it adds two extra locks to such critical kernel paths as the write system call. Thus, gating should only be added as needed. Details on the use and current status of snapshots in FFS can be found in /sys/ufs/ffs/README.snapshot so for brevity and timelyness is not included here. Unless and until you create a snapshot file, these changes should have no effect on your system (famous last words).
2000-07-11 22:07:57 +00:00
for (loc = 0; loc < last; loc++) {
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
if (ip->i_ump->um_fstype == UFS1) {
dblk = ((ufs1_daddr_t *)(ibp->b_data))[loc];
Reduce the probability of low block numbers passed to ffs_snapblkfree() by skipping the call from ffs_snapremove() if the block number is zero. Simplify snapshot locking in ffs_copyonwrite() and ffs_snapblkfree() by using the same locking protocol for low block numbers as for larger block numbers. This removes a lock leak that could happen if vn_lock() succeeded after lockmgr() failed in ffs_snapblkfree(). Check if snapshot is gone before retrying a lock in ffs_copyonwrite().
2005-10-09 19:45:01 +00:00
if (dblk == 0)
continue;
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
if (dblk == BLK_NOCOPY || dblk == BLK_SNAP)
((ufs1_daddr_t *)(ibp->b_data))[loc]= 0;
else if ((dblk == blkstofrags(fs, blkno) &&
ffs_snapblkfree(fs, ip->i_devvp, dblk,
Ensure that filesystem metadata contained within persistent snapshots is always kept consistent. Suggested by: Jeff Roberson
2011-06-15 23:19:09 +00:00
fs->fs_bsize, ip->i_number, vp->v_type,
NULL))) {
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
ip->i_din1->di_blocks -=
btodb(fs->fs_bsize);
((ufs1_daddr_t *)(ibp->b_data))[loc]= 0;
}
continue;
}
dblk = ((ufs2_daddr_t *)(ibp->b_data))[loc];
Reduce the probability of low block numbers passed to ffs_snapblkfree() by skipping the call from ffs_snapremove() if the block number is zero. Simplify snapshot locking in ffs_copyonwrite() and ffs_snapblkfree() by using the same locking protocol for low block numbers as for larger block numbers. This removes a lock leak that could happen if vn_lock() succeeded after lockmgr() failed in ffs_snapblkfree(). Check if snapshot is gone before retrying a lock in ffs_copyonwrite().
2005-10-09 19:45:01 +00:00
if (dblk == 0)
continue;
Several fixes for units errors: 1) Do not assume that the superblock will be of size fs->fs_bsize. This fixes a panic when taking a snapshot on a filesystem with a block size bigger than 8K. 2) Properly calculate the number of fragments that follow the superblock summary information. This fixes a bug with inconsistent snapshots. 3) When cleaning up a snapshot that is about to be removed, properly calculate the number of blocks that need to be checked. This fixes a bug that created partially allocated inodes. 4) When moving blocks from a snapshot that is about to be removed to another snapshot, properly account for the reduced number of blocks in the snapshot from which they are taken. This fixes a bug in which the number of blocks released from a snapshot did not match the number that it claimed to have.
2001-05-08 07:29:03 +00:00
if (dblk == BLK_NOCOPY || dblk == BLK_SNAP)
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
((ufs2_daddr_t *)(ibp->b_data))[loc] = 0;
Several fixes for units errors: 1) Do not assume that the superblock will be of size fs->fs_bsize. This fixes a panic when taking a snapshot on a filesystem with a block size bigger than 8K. 2) Properly calculate the number of fragments that follow the superblock summary information. This fixes a bug with inconsistent snapshots. 3) When cleaning up a snapshot that is about to be removed, properly calculate the number of blocks that need to be checked. This fixes a bug that created partially allocated inodes. 4) When moving blocks from a snapshot that is about to be removed to another snapshot, properly account for the reduced number of blocks in the snapshot from which they are taken. This fixes a bug in which the number of blocks released from a snapshot did not match the number that it claimed to have.
2001-05-08 07:29:03 +00:00
else if ((dblk == blkstofrags(fs, blkno) &&
When taking a snapshot, we must check for active files that have been unlinked (e.g., with a zero link count). We have to expunge all trace of these files from the snapshot so that they are neither reclaimed prematurely by fsck nor saved unnecessarily by dump.
2002-02-02 01:42:44 +00:00
ffs_snapblkfree(fs, ip->i_devvp, dblk,
Ensure that filesystem metadata contained within persistent snapshots is always kept consistent. Suggested by: Jeff Roberson
2011-06-15 23:19:09 +00:00
fs->fs_bsize, ip->i_number, vp->v_type, NULL))) {
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
ip->i_din2->di_blocks -= btodb(fs->fs_bsize);
((ufs2_daddr_t *)(ibp->b_data))[loc] = 0;
Several fixes for units errors: 1) Do not assume that the superblock will be of size fs->fs_bsize. This fixes a panic when taking a snapshot on a filesystem with a block size bigger than 8K. 2) Properly calculate the number of fragments that follow the superblock summary information. This fixes a bug with inconsistent snapshots. 3) When cleaning up a snapshot that is about to be removed, properly calculate the number of blocks that need to be checked. This fixes a bug that created partially allocated inodes. 4) When moving blocks from a snapshot that is about to be removed to another snapshot, properly account for the reduced number of blocks in the snapshot from which they are taken. This fixes a bug in which the number of blocks released from a snapshot did not match the number that it claimed to have.
2001-05-08 07:29:03 +00:00
}
Add snapshots to the fast filesystem. Most of the changes support the gating of system calls that cause modifications to the underlying filesystem. The gating can be enabled by any filesystem that needs to consistently suspend operations by adding the vop_stdgetwritemount to their set of vnops. Once gating is enabled, the function vfs_write_suspend stops all new write operations to a filesystem, allows any filesystem modifying system calls already in progress to complete, then sync's the filesystem to disk and returns. The function vfs_write_resume allows the suspended write operations to begin again. Gating is not added by default for all filesystems as for SMP systems it adds two extra locks to such critical kernel paths as the write system call. Thus, gating should only be added as needed. Details on the use and current status of snapshots in FFS can be found in /sys/ufs/ffs/README.snapshot so for brevity and timelyness is not included here. Unless and until you create a snapshot file, these changes should have no effect on your system (famous last words).
2000-07-11 22:07:57 +00:00
}
bawrite(ibp);
}
/*
* Clear snapshot flag and drop reference.
*/
Clean up the snapshot code so that it no longer depends on the use of the SF_IMMUTABLE flag to prevent writing. Instead put in explicit checking for the SF_SNAPSHOT flag in the appropriate places. With this change, it is now possible to rename and link to snapshot files. It is also possible to set or clear any of the owner, group, or other read bits on the file, though none of the write or execute bits can be set. There is also an explicit test to prevent the setting or clearing of the SF_SNAPSHOT flag via chflags() or fchflags(). Note also that the modify time cannot be changed as it needs to accurately reflect the time that the snapshot was taken. Submitted by: Robert Watson <rwatson@FreeBSD.org>
2000-07-26 23:07:01 +00:00
ip->i_flags &= ~SF_SNAPSHOT;
Avoid using casts as lvalues. Introduce DIP_SET macro which sets proper inode field based on UFS version. Use DIP ro read values and DIP_SET to modify them throughout FFS code base.
2004-07-28 06:41:27 +00:00
DIP_SET(ip, i_flags, ip->i_flags);
Add snapshots to the fast filesystem. Most of the changes support the gating of system calls that cause modifications to the underlying filesystem. The gating can be enabled by any filesystem that needs to consistently suspend operations by adding the vop_stdgetwritemount to their set of vnops. Once gating is enabled, the function vfs_write_suspend stops all new write operations to a filesystem, allows any filesystem modifying system calls already in progress to complete, then sync's the filesystem to disk and returns. The function vfs_write_resume allows the suspended write operations to begin again. Gating is not added by default for all filesystems as for SMP systems it adds two extra locks to such critical kernel paths as the write system call. Thus, gating should only be added as needed. Details on the use and current status of snapshots in FFS can be found in /sys/ufs/ffs/README.snapshot so for brevity and timelyness is not included here. Unless and until you create a snapshot file, these changes should have no effect on your system (famous last words).
2000-07-11 22:07:57 +00:00
ip->i_flag |= IN_CHANGE | IN_UPDATE;
- Merge soft-updates journaling from projects/suj/head into head. This brings in support for an optional intent log which eliminates the need for background fsck on unclean shutdown. Sponsored by: iXsystems, Yahoo!, and Juniper. With help from: McKusick and Peter Holm
2010-04-24 07:05:35 +00:00
/*
* The dirtied indirects must be written out before
* softdep_setup_freeblocks() is called. Otherwise indir_trunc()
* may find indirect pointers using the magic BLK_* values.
*/
if (DOINGSOFTDEP(vp))
Add a third flags argument to ffs_syncvnode to avoid a possible conflict with MNT_WAIT flags that passed in its second argument. This will be MFC'ed together with r232351. Discussed with: kib
2012-03-25 00:02:37 +00:00
ffs_syncvnode(vp, MNT_WAIT, 0);
Turn off disk quotas for snapshot files.
2006-05-05 20:10:04 +00:00
#ifdef QUOTA
/*
* Reenable disk quotas for ex-snapshot file.
*/
if (!getinoquota(ip))
(void) chkdq(ip, DIP(ip, i_blocks), KERNCRED, FORCE);
#endif
Add snapshots to the fast filesystem. Most of the changes support the gating of system calls that cause modifications to the underlying filesystem. The gating can be enabled by any filesystem that needs to consistently suspend operations by adding the vop_stdgetwritemount to their set of vnops. Once gating is enabled, the function vfs_write_suspend stops all new write operations to a filesystem, allows any filesystem modifying system calls already in progress to complete, then sync's the filesystem to disk and returns. The function vfs_write_resume allows the suspended write operations to begin again. Gating is not added by default for all filesystems as for SMP systems it adds two extra locks to such critical kernel paths as the write system call. Thus, gating should only be added as needed. Details on the use and current status of snapshots in FFS can be found in /sys/ufs/ffs/README.snapshot so for brevity and timelyness is not included here. Unless and until you create a snapshot file, these changes should have no effect on your system (famous last words).
2000-07-11 22:07:57 +00:00
}
/*
* Notification that a block is being freed. Return zero if the free
* should be allowed to proceed. Return non-zero if the snapshot file
* wants to claim the block. The block will be claimed if it is an
* uncopied part of one of the snapshots. It will be freed if it is
* either a BLK_NOCOPY or has already been copied in all of the snapshots.
* If a fragment is being freed, then all snapshots that care about
* it must make a copy since a snapshot file can only claim full sized
* blocks. Note that if more than one snapshot file maps the block,
* we can pick one at random to claim it. Since none of the snapshots
* can change, we are assurred that they will all see the same unmodified
* image. When deleting a snapshot file (see ffs_snapremove above), we
* must push any of these claimed blocks to one of the other snapshots
* that maps it. These claimed blocks are easily identified as they will
* have a block number equal to their logical block number within the
* snapshot. A copied block can never have this property because they
* must always have been allocated from a BLK_NOCOPY location.
*/
int
Ensure that filesystem metadata contained within persistent snapshots is always kept consistent. Suggested by: Jeff Roberson
2011-06-15 23:19:09 +00:00
ffs_snapblkfree(fs, devvp, bno, size, inum, vtype, wkhd)
When taking a snapshot, we must check for active files that have been unlinked (e.g., with a zero link count). We have to expunge all trace of these files from the snapshot so that they are neither reclaimed prematurely by fsck nor saved unnecessarily by dump.
2002-02-02 01:42:44 +00:00
struct fs *fs;
struct vnode *devvp;
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
ufs2_daddr_t bno;
Add snapshots to the fast filesystem. Most of the changes support the gating of system calls that cause modifications to the underlying filesystem. The gating can be enabled by any filesystem that needs to consistently suspend operations by adding the vop_stdgetwritemount to their set of vnops. Once gating is enabled, the function vfs_write_suspend stops all new write operations to a filesystem, allows any filesystem modifying system calls already in progress to complete, then sync's the filesystem to disk and returns. The function vfs_write_resume allows the suspended write operations to begin again. Gating is not added by default for all filesystems as for SMP systems it adds two extra locks to such critical kernel paths as the write system call. Thus, gating should only be added as needed. Details on the use and current status of snapshots in FFS can be found in /sys/ufs/ffs/README.snapshot so for brevity and timelyness is not included here. Unless and until you create a snapshot file, these changes should have no effect on your system (famous last words).
2000-07-11 22:07:57 +00:00
long size;
When taking a snapshot, we must check for active files that have been unlinked (e.g., with a zero link count). We have to expunge all trace of these files from the snapshot so that they are neither reclaimed prematurely by fsck nor saved unnecessarily by dump.
2002-02-02 01:42:44 +00:00
ino_t inum;
Ensure that filesystem metadata contained within persistent snapshots is always kept consistent. Suggested by: Jeff Roberson
2011-06-15 23:19:09 +00:00
enum vtype vtype;
Update to soft updates journaling to properly track freed blocks that get claimed by snapshots. Submitted by: Jeff Roberson Tested by: Peter Holm
2011-06-12 19:27:05 +00:00
struct workhead *wkhd;
Add snapshots to the fast filesystem. Most of the changes support the gating of system calls that cause modifications to the underlying filesystem. The gating can be enabled by any filesystem that needs to consistently suspend operations by adding the vop_stdgetwritemount to their set of vnops. Once gating is enabled, the function vfs_write_suspend stops all new write operations to a filesystem, allows any filesystem modifying system calls already in progress to complete, then sync's the filesystem to disk and returns. The function vfs_write_resume allows the suspended write operations to begin again. Gating is not added by default for all filesystems as for SMP systems it adds two extra locks to such critical kernel paths as the write system call. Thus, gating should only be added as needed. Details on the use and current status of snapshots in FFS can be found in /sys/ufs/ffs/README.snapshot so for brevity and timelyness is not included here. Unless and until you create a snapshot file, these changes should have no effect on your system (famous last words).
2000-07-11 22:07:57 +00:00
{
Use NULL instead of 0 for pointers
2012-07-22 15:40:31 +00:00
struct buf *ibp, *cbp, *savedcbp = NULL;
KSE Milestone 2 Note ALL MODULES MUST BE RECOMPILED make the kernel aware that there are smaller units of scheduling than the process. (but only allow one thread per process at this time). This is functionally equivalent to teh previousl -current except that there is a thread associated with each process. Sorry john! (your next MFC will be a doosie!) Reviewed by: peter@freebsd.org, dillon@freebsd.org X-MFC after: ha ha ha ha
2001-09-12 08:38:13 +00:00
struct thread *td = curthread;
Add snapshots to the fast filesystem. Most of the changes support the gating of system calls that cause modifications to the underlying filesystem. The gating can be enabled by any filesystem that needs to consistently suspend operations by adding the vop_stdgetwritemount to their set of vnops. Once gating is enabled, the function vfs_write_suspend stops all new write operations to a filesystem, allows any filesystem modifying system calls already in progress to complete, then sync's the filesystem to disk and returns. The function vfs_write_resume allows the suspended write operations to begin again. Gating is not added by default for all filesystems as for SMP systems it adds two extra locks to such critical kernel paths as the write system call. Thus, gating should only be added as needed. Details on the use and current status of snapshots in FFS can be found in /sys/ufs/ffs/README.snapshot so for brevity and timelyness is not included here. Unless and until you create a snapshot file, these changes should have no effect on your system (famous last words).
2000-07-11 22:07:57 +00:00
struct inode *ip;
Remove a race condition / deadlock from snapshots. When converting from individual vnode locks to the snapshot lock, be sure to pass any waiting processes along to the new lock as well. This transfer is done by a new function in the lock manager, transferlockers(from_lock, to_lock); Thanks to Lamont Granquist <lamont@scriptkiddie.org> for his help in pounding on snapshots beyond all reason and finding this deadlock. Sponsored by: DARPA & NAI Labs.
2002-11-30 19:00:51 +00:00
struct vnode *vp = NULL;
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
ufs_lbn_t lbn;
ufs2_daddr_t blkno;
Reduce the probability of low block numbers passed to ffs_snapblkfree() by skipping the call from ffs_snapremove() if the block number is zero. Simplify snapshot locking in ffs_copyonwrite() and ffs_snapblkfree() by using the same locking protocol for low block numbers as for larger block numbers. This removes a lock leak that could happen if vn_lock() succeeded after lockmgr() failed in ffs_snapblkfree(). Check if snapshot is gone before retrying a lock in ffs_copyonwrite().
2005-10-09 19:45:01 +00:00
int indiroff = 0, error = 0, claimedblk = 0;
Create struct snapdata which contains the snapshot fields from cdev and the previously malloc'ed snapshot lock. Malloc struct snapdata instead of just the lock. Replace snapshot fields in cdev with pointer to snapdata (saves 16 bytes). While here, give the private readblock() function a vnode argument in preparation for moving UFS to access GEOM directly.
2004-09-13 07:29:45 +00:00
struct snapdata *sn;
Add snapshots to the fast filesystem. Most of the changes support the gating of system calls that cause modifications to the underlying filesystem. The gating can be enabled by any filesystem that needs to consistently suspend operations by adding the vop_stdgetwritemount to their set of vnops. Once gating is enabled, the function vfs_write_suspend stops all new write operations to a filesystem, allows any filesystem modifying system calls already in progress to complete, then sync's the filesystem to disk and returns. The function vfs_write_resume allows the suspended write operations to begin again. Gating is not added by default for all filesystems as for SMP systems it adds two extra locks to such critical kernel paths as the write system call. Thus, gating should only be added as needed. Details on the use and current status of snapshots in FFS can be found in /sys/ufs/ffs/README.snapshot so for brevity and timelyness is not included here. Unless and until you create a snapshot file, these changes should have no effect on your system (famous last words).
2000-07-11 22:07:57 +00:00
lbn = fragstoblks(fs, bno);
Remove a race condition / deadlock from snapshots. When converting from individual vnode locks to the snapshot lock, be sure to pass any waiting processes along to the new lock as well. This transfer is done by a new function in the lock manager, transferlockers(from_lock, to_lock); Thanks to Lamont Granquist <lamont@scriptkiddie.org> for his help in pounding on snapshots beyond all reason and finding this deadlock. Sponsored by: DARPA & NAI Labs.
2002-11-30 19:00:51 +00:00
retry:
VI_LOCK(devvp);
Create struct snapdata which contains the snapshot fields from cdev and the previously malloc'ed snapshot lock. Malloc struct snapdata instead of just the lock. Replace snapshot fields in cdev with pointer to snapdata (saves 16 bytes). While here, give the private readblock() function a vnode argument in preparation for moving UFS to access GEOM directly.
2004-09-13 07:29:45 +00:00
sn = devvp->v_rdev->si_snapdata;
Do not traverse list of snapshots if there isn't one. Found by: scottl
2004-09-16 17:28:56 +00:00
if (sn == NULL) {
VI_UNLOCK(devvp);
return (0);
}
Cleanup lockmgr interface and exported KPI: - Remove the "thread" argument from the lockmgr() function as it is always curthread now - Axe lockcount() function as it is no longer used - Axe LOCKMGR_ASSERT() as it is bogus really and no currently used. Hopefully this will be soonly replaced by something suitable for it. - Remove the prototype for dumplockinfo() as the function is no longer present Addictionally: - Introduce a KASSERT() in lockstatus() in order to let it accept only curthread or NULL as they should only be passed - Do a little bit of style(9) cleanup on lockmgr.h KPI results heavilly broken by this change, so manpages and FreeBSD_version will be modified accordingly by further commits. Tested by: matteo
2008-01-24 12:34:30 +00:00
if (lockmgr(&sn->sn_lock, LK_INTERLOCK | LK_EXCLUSIVE | LK_SLEEPFAIL,
VI_MTX(devvp)) != 0)
Reduce the probability of low block numbers passed to ffs_snapblkfree() by skipping the call from ffs_snapremove() if the block number is zero. Simplify snapshot locking in ffs_copyonwrite() and ffs_snapblkfree() by using the same locking protocol for low block numbers as for larger block numbers. This removes a lock leak that could happen if vn_lock() succeeded after lockmgr() failed in ffs_snapblkfree(). Check if snapshot is gone before retrying a lock in ffs_copyonwrite().
2005-10-09 19:45:01 +00:00
goto retry;
Create struct snapdata which contains the snapshot fields from cdev and the previously malloc'ed snapshot lock. Malloc struct snapdata instead of just the lock. Replace snapshot fields in cdev with pointer to snapdata (saves 16 bytes). While here, give the private readblock() function a vnode argument in preparation for moving UFS to access GEOM directly.
2004-09-13 07:29:45 +00:00
TAILQ_FOREACH(ip, &sn->sn_head, i_nextsnap) {
Add snapshots to the fast filesystem. Most of the changes support the gating of system calls that cause modifications to the underlying filesystem. The gating can be enabled by any filesystem that needs to consistently suspend operations by adding the vop_stdgetwritemount to their set of vnops. Once gating is enabled, the function vfs_write_suspend stops all new write operations to a filesystem, allows any filesystem modifying system calls already in progress to complete, then sync's the filesystem to disk and returns. The function vfs_write_resume allows the suspended write operations to begin again. Gating is not added by default for all filesystems as for SMP systems it adds two extra locks to such critical kernel paths as the write system call. Thus, gating should only be added as needed. Details on the use and current status of snapshots in FFS can be found in /sys/ufs/ffs/README.snapshot so for brevity and timelyness is not included here. Unless and until you create a snapshot file, these changes should have no effect on your system (famous last words).
2000-07-11 22:07:57 +00:00
vp = ITOV(ip);
- Call softdep_prealloc() before any of the balloc routines in the snapshot code. - Don't fsync() vnodes in prealloc if copy on write is in progress. It is not safe to recurse back into the write path here. Reported by: Vladimir Grebenschikov <vova@fbsd.ru>
2010-05-07 08:45:21 +00:00
if (DOINGSOFTDEP(vp))
softdep_prealloc(vp, MNT_WAIT);
Add snapshots to the fast filesystem. Most of the changes support the gating of system calls that cause modifications to the underlying filesystem. The gating can be enabled by any filesystem that needs to consistently suspend operations by adding the vop_stdgetwritemount to their set of vnops. Once gating is enabled, the function vfs_write_suspend stops all new write operations to a filesystem, allows any filesystem modifying system calls already in progress to complete, then sync's the filesystem to disk and returns. The function vfs_write_resume allows the suspended write operations to begin again. Gating is not added by default for all filesystems as for SMP systems it adds two extra locks to such critical kernel paths as the write system call. Thus, gating should only be added as needed. Details on the use and current status of snapshots in FFS can be found in /sys/ufs/ffs/README.snapshot so for brevity and timelyness is not included here. Unless and until you create a snapshot file, these changes should have no effect on your system (famous last words).
2000-07-11 22:07:57 +00:00
/*
* Lookup block being written.
*/
if (lbn < NDADDR) {
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
blkno = DIP(ip, i_db[lbn]);
Add snapshots to the fast filesystem. Most of the changes support the gating of system calls that cause modifications to the underlying filesystem. The gating can be enabled by any filesystem that needs to consistently suspend operations by adding the vop_stdgetwritemount to their set of vnops. Once gating is enabled, the function vfs_write_suspend stops all new write operations to a filesystem, allows any filesystem modifying system calls already in progress to complete, then sync's the filesystem to disk and returns. The function vfs_write_resume allows the suspended write operations to begin again. Gating is not added by default for all filesystems as for SMP systems it adds two extra locks to such critical kernel paths as the write system call. Thus, gating should only be added as needed. Details on the use and current status of snapshots in FFS can be found in /sys/ufs/ffs/README.snapshot so for brevity and timelyness is not included here. Unless and until you create a snapshot file, these changes should have no effect on your system (famous last words).
2000-07-11 22:07:57 +00:00
} else {
Move the P_COWINPROGRESS flag from being a per-process p_flag to being a per-thread td_pflag which doesn't require any locks to read or write as it is only read or written by curthread on itself. Glanced at by: mckusick
2003-10-23 21:14:08 +00:00
td->td_pflags |= TDP_COWINPROGRESS;
VOP_BALLOC was never really a VOP in the first place, so convert it to UFS_BALLOC like the other "between UFS and FFS function interfaces".
2001-04-29 12:36:52 +00:00
error = UFS_BALLOC(vp, lblktosize(fs, (off_t)lbn),
Rename the BALLOC flags from B_* to BA_* to avoid confusion with the struct buf B_ flags. Approved by: mckusick
2002-06-23 06:12:22 +00:00
fs->fs_bsize, KERNCRED, BA_METAONLY, &ibp);
Move the P_COWINPROGRESS flag from being a per-process p_flag to being a per-thread td_pflag which doesn't require any locks to read or write as it is only read or written by curthread on itself. Glanced at by: mckusick
2003-10-23 21:14:08 +00:00
td->td_pflags &= ~TDP_COWINPROGRESS;
Add snapshots to the fast filesystem. Most of the changes support the gating of system calls that cause modifications to the underlying filesystem. The gating can be enabled by any filesystem that needs to consistently suspend operations by adding the vop_stdgetwritemount to their set of vnops. Once gating is enabled, the function vfs_write_suspend stops all new write operations to a filesystem, allows any filesystem modifying system calls already in progress to complete, then sync's the filesystem to disk and returns. The function vfs_write_resume allows the suspended write operations to begin again. Gating is not added by default for all filesystems as for SMP systems it adds two extra locks to such critical kernel paths as the write system call. Thus, gating should only be added as needed. Details on the use and current status of snapshots in FFS can be found in /sys/ufs/ffs/README.snapshot so for brevity and timelyness is not included here. Unless and until you create a snapshot file, these changes should have no effect on your system (famous last words).
2000-07-11 22:07:57 +00:00
if (error)
break;
indiroff = (lbn - NDADDR) % NINDIR(fs);
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
if (ip->i_ump->um_fstype == UFS1)
blkno=((ufs1_daddr_t *)(ibp->b_data))[indiroff];
else
blkno=((ufs2_daddr_t *)(ibp->b_data))[indiroff];
Add snapshots to the fast filesystem. Most of the changes support the gating of system calls that cause modifications to the underlying filesystem. The gating can be enabled by any filesystem that needs to consistently suspend operations by adding the vop_stdgetwritemount to their set of vnops. Once gating is enabled, the function vfs_write_suspend stops all new write operations to a filesystem, allows any filesystem modifying system calls already in progress to complete, then sync's the filesystem to disk and returns. The function vfs_write_resume allows the suspended write operations to begin again. Gating is not added by default for all filesystems as for SMP systems it adds two extra locks to such critical kernel paths as the write system call. Thus, gating should only be added as needed. Details on the use and current status of snapshots in FFS can be found in /sys/ufs/ffs/README.snapshot so for brevity and timelyness is not included here. Unless and until you create a snapshot file, these changes should have no effect on your system (famous last words).
2000-07-11 22:07:57 +00:00
}
/*
* Check to see if block needs to be copied.
*/
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
if (blkno == 0) {
/*
* A block that we map is being freed. If it has not
* been claimed yet, we will claim or copy it (below).
*/
claimedblk = 1;
} else if (blkno == BLK_SNAP) {
/*
* No previous snapshot claimed the block,
Remove a race condition / deadlock from snapshots. When converting from individual vnode locks to the snapshot lock, be sure to pass any waiting processes along to the new lock as well. This transfer is done by a new function in the lock manager, transferlockers(from_lock, to_lock); Thanks to Lamont Granquist <lamont@scriptkiddie.org> for his help in pounding on snapshots beyond all reason and finding this deadlock. Sponsored by: DARPA & NAI Labs.
2002-11-30 19:00:51 +00:00
* so it will be freed and become a BLK_NOCOPY
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
* (don't care) for us.
*/
Add snapshots to the fast filesystem. Most of the changes support the gating of system calls that cause modifications to the underlying filesystem. The gating can be enabled by any filesystem that needs to consistently suspend operations by adding the vop_stdgetwritemount to their set of vnops. Once gating is enabled, the function vfs_write_suspend stops all new write operations to a filesystem, allows any filesystem modifying system calls already in progress to complete, then sync's the filesystem to disk and returns. The function vfs_write_resume allows the suspended write operations to begin again. Gating is not added by default for all filesystems as for SMP systems it adds two extra locks to such critical kernel paths as the write system call. Thus, gating should only be added as needed. Details on the use and current status of snapshots in FFS can be found in /sys/ufs/ffs/README.snapshot so for brevity and timelyness is not included here. Unless and until you create a snapshot file, these changes should have no effect on your system (famous last words).
2000-07-11 22:07:57 +00:00
if (claimedblk)
panic("snapblkfree: inconsistent block type");
if (lbn < NDADDR) {
Avoid using casts as lvalues. Introduce DIP_SET macro which sets proper inode field based on UFS version. Use DIP ro read values and DIP_SET to modify them throughout FFS code base.
2004-07-28 06:41:27 +00:00
DIP_SET(ip, i_db[lbn], BLK_NOCOPY);
Add snapshots to the fast filesystem. Most of the changes support the gating of system calls that cause modifications to the underlying filesystem. The gating can be enabled by any filesystem that needs to consistently suspend operations by adding the vop_stdgetwritemount to their set of vnops. Once gating is enabled, the function vfs_write_suspend stops all new write operations to a filesystem, allows any filesystem modifying system calls already in progress to complete, then sync's the filesystem to disk and returns. The function vfs_write_resume allows the suspended write operations to begin again. Gating is not added by default for all filesystems as for SMP systems it adds two extra locks to such critical kernel paths as the write system call. Thus, gating should only be added as needed. Details on the use and current status of snapshots in FFS can be found in /sys/ufs/ffs/README.snapshot so for brevity and timelyness is not included here. Unless and until you create a snapshot file, these changes should have no effect on your system (famous last words).
2000-07-11 22:07:57 +00:00
ip->i_flag |= IN_CHANGE | IN_UPDATE;
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
} else if (ip->i_ump->um_fstype == UFS1) {
((ufs1_daddr_t *)(ibp->b_data))[indiroff] =
BLK_NOCOPY;
bdwrite(ibp);
Add snapshots to the fast filesystem. Most of the changes support the gating of system calls that cause modifications to the underlying filesystem. The gating can be enabled by any filesystem that needs to consistently suspend operations by adding the vop_stdgetwritemount to their set of vnops. Once gating is enabled, the function vfs_write_suspend stops all new write operations to a filesystem, allows any filesystem modifying system calls already in progress to complete, then sync's the filesystem to disk and returns. The function vfs_write_resume allows the suspended write operations to begin again. Gating is not added by default for all filesystems as for SMP systems it adds two extra locks to such critical kernel paths as the write system call. Thus, gating should only be added as needed. Details on the use and current status of snapshots in FFS can be found in /sys/ufs/ffs/README.snapshot so for brevity and timelyness is not included here. Unless and until you create a snapshot file, these changes should have no effect on your system (famous last words).
2000-07-11 22:07:57 +00:00
} else {
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
((ufs2_daddr_t *)(ibp->b_data))[indiroff] =
Add snapshots to the fast filesystem. Most of the changes support the gating of system calls that cause modifications to the underlying filesystem. The gating can be enabled by any filesystem that needs to consistently suspend operations by adding the vop_stdgetwritemount to their set of vnops. Once gating is enabled, the function vfs_write_suspend stops all new write operations to a filesystem, allows any filesystem modifying system calls already in progress to complete, then sync's the filesystem to disk and returns. The function vfs_write_resume allows the suspended write operations to begin again. Gating is not added by default for all filesystems as for SMP systems it adds two extra locks to such critical kernel paths as the write system call. Thus, gating should only be added as needed. Details on the use and current status of snapshots in FFS can be found in /sys/ufs/ffs/README.snapshot so for brevity and timelyness is not included here. Unless and until you create a snapshot file, these changes should have no effect on your system (famous last words).
2000-07-11 22:07:57 +00:00
BLK_NOCOPY;
bdwrite(ibp);
}
continue;
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
} else /* BLK_NOCOPY or default */ {
/*
* If the snapshot has already copied the block
* (default), or does not care about the block,
* it is not needed.
*/
if (lbn >= NDADDR)
bqrelse(ibp);
continue;
Add snapshots to the fast filesystem. Most of the changes support the gating of system calls that cause modifications to the underlying filesystem. The gating can be enabled by any filesystem that needs to consistently suspend operations by adding the vop_stdgetwritemount to their set of vnops. Once gating is enabled, the function vfs_write_suspend stops all new write operations to a filesystem, allows any filesystem modifying system calls already in progress to complete, then sync's the filesystem to disk and returns. The function vfs_write_resume allows the suspended write operations to begin again. Gating is not added by default for all filesystems as for SMP systems it adds two extra locks to such critical kernel paths as the write system call. Thus, gating should only be added as needed. Details on the use and current status of snapshots in FFS can be found in /sys/ufs/ffs/README.snapshot so for brevity and timelyness is not included here. Unless and until you create a snapshot file, these changes should have no effect on your system (famous last words).
2000-07-11 22:07:57 +00:00
}
/*
* If this is a full size block, we will just grab it
* and assign it to the snapshot inode. Otherwise we
* will proceed to copy it. See explanation for this
* routine as to why only a single snapshot needs to
* claim this block.
*/
if (size == fs->fs_bsize) {
#ifdef DEBUG
if (snapdebug)
Fix up kernel sources to be ready for a 64-bit ino_t. Original code by: Gleb Kurtsou
2012-09-27 23:30:49 +00:00
printf("%s %ju lbn %jd from inum %ju\n",
"Grabonremove: snapino",
(uintmax_t)ip->i_number,
(intmax_t)lbn, (uintmax_t)inum);
Add snapshots to the fast filesystem. Most of the changes support the gating of system calls that cause modifications to the underlying filesystem. The gating can be enabled by any filesystem that needs to consistently suspend operations by adding the vop_stdgetwritemount to their set of vnops. Once gating is enabled, the function vfs_write_suspend stops all new write operations to a filesystem, allows any filesystem modifying system calls already in progress to complete, then sync's the filesystem to disk and returns. The function vfs_write_resume allows the suspended write operations to begin again. Gating is not added by default for all filesystems as for SMP systems it adds two extra locks to such critical kernel paths as the write system call. Thus, gating should only be added as needed. Details on the use and current status of snapshots in FFS can be found in /sys/ufs/ffs/README.snapshot so for brevity and timelyness is not included here. Unless and until you create a snapshot file, these changes should have no effect on your system (famous last words).
2000-07-11 22:07:57 +00:00
#endif
Update to soft updates journaling to properly track freed blocks that get claimed by snapshots. Submitted by: Jeff Roberson Tested by: Peter Holm
2011-06-12 19:27:05 +00:00
/*
* If journaling is tracking this write we must add
* the work to the inode or indirect being written.
*/
if (wkhd != NULL) {
if (lbn < NDADDR)
softdep_inode_append(ip,
curthread->td_ucred, wkhd);
else
softdep_buf_append(ibp, wkhd);
}
Add snapshots to the fast filesystem. Most of the changes support the gating of system calls that cause modifications to the underlying filesystem. The gating can be enabled by any filesystem that needs to consistently suspend operations by adding the vop_stdgetwritemount to their set of vnops. Once gating is enabled, the function vfs_write_suspend stops all new write operations to a filesystem, allows any filesystem modifying system calls already in progress to complete, then sync's the filesystem to disk and returns. The function vfs_write_resume allows the suspended write operations to begin again. Gating is not added by default for all filesystems as for SMP systems it adds two extra locks to such critical kernel paths as the write system call. Thus, gating should only be added as needed. Details on the use and current status of snapshots in FFS can be found in /sys/ufs/ffs/README.snapshot so for brevity and timelyness is not included here. Unless and until you create a snapshot file, these changes should have no effect on your system (famous last words).
2000-07-11 22:07:57 +00:00
if (lbn < NDADDR) {
Avoid using casts as lvalues. Introduce DIP_SET macro which sets proper inode field based on UFS version. Use DIP ro read values and DIP_SET to modify them throughout FFS code base.
2004-07-28 06:41:27 +00:00
DIP_SET(ip, i_db[lbn], bno);
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
} else if (ip->i_ump->um_fstype == UFS1) {
((ufs1_daddr_t *)(ibp->b_data))[indiroff] = bno;
bdwrite(ibp);
Add snapshots to the fast filesystem. Most of the changes support the gating of system calls that cause modifications to the underlying filesystem. The gating can be enabled by any filesystem that needs to consistently suspend operations by adding the vop_stdgetwritemount to their set of vnops. Once gating is enabled, the function vfs_write_suspend stops all new write operations to a filesystem, allows any filesystem modifying system calls already in progress to complete, then sync's the filesystem to disk and returns. The function vfs_write_resume allows the suspended write operations to begin again. Gating is not added by default for all filesystems as for SMP systems it adds two extra locks to such critical kernel paths as the write system call. Thus, gating should only be added as needed. Details on the use and current status of snapshots in FFS can be found in /sys/ufs/ffs/README.snapshot so for brevity and timelyness is not included here. Unless and until you create a snapshot file, these changes should have no effect on your system (famous last words).
2000-07-11 22:07:57 +00:00
} else {
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
((ufs2_daddr_t *)(ibp->b_data))[indiroff] = bno;
Add snapshots to the fast filesystem. Most of the changes support the gating of system calls that cause modifications to the underlying filesystem. The gating can be enabled by any filesystem that needs to consistently suspend operations by adding the vop_stdgetwritemount to their set of vnops. Once gating is enabled, the function vfs_write_suspend stops all new write operations to a filesystem, allows any filesystem modifying system calls already in progress to complete, then sync's the filesystem to disk and returns. The function vfs_write_resume allows the suspended write operations to begin again. Gating is not added by default for all filesystems as for SMP systems it adds two extra locks to such critical kernel paths as the write system call. Thus, gating should only be added as needed. Details on the use and current status of snapshots in FFS can be found in /sys/ufs/ffs/README.snapshot so for brevity and timelyness is not included here. Unless and until you create a snapshot file, these changes should have no effect on your system (famous last words).
2000-07-11 22:07:57 +00:00
bdwrite(ibp);
}
Avoid using casts as lvalues. Introduce DIP_SET macro which sets proper inode field based on UFS version. Use DIP ro read values and DIP_SET to modify them throughout FFS code base.
2004-07-28 06:41:27 +00:00
DIP_SET(ip, i_blocks, DIP(ip, i_blocks) + btodb(size));
Add snapshots to the fast filesystem. Most of the changes support the gating of system calls that cause modifications to the underlying filesystem. The gating can be enabled by any filesystem that needs to consistently suspend operations by adding the vop_stdgetwritemount to their set of vnops. Once gating is enabled, the function vfs_write_suspend stops all new write operations to a filesystem, allows any filesystem modifying system calls already in progress to complete, then sync's the filesystem to disk and returns. The function vfs_write_resume allows the suspended write operations to begin again. Gating is not added by default for all filesystems as for SMP systems it adds two extra locks to such critical kernel paths as the write system call. Thus, gating should only be added as needed. Details on the use and current status of snapshots in FFS can be found in /sys/ufs/ffs/README.snapshot so for brevity and timelyness is not included here. Unless and until you create a snapshot file, these changes should have no effect on your system (famous last words).
2000-07-11 22:07:57 +00:00
ip->i_flag |= IN_CHANGE | IN_UPDATE;
Cleanup lockmgr interface and exported KPI: - Remove the "thread" argument from the lockmgr() function as it is always curthread now - Axe lockcount() function as it is no longer used - Axe LOCKMGR_ASSERT() as it is bogus really and no currently used. Hopefully this will be soonly replaced by something suitable for it. - Remove the prototype for dumplockinfo() as the function is no longer present Addictionally: - Introduce a KASSERT() in lockstatus() in order to let it accept only curthread or NULL as they should only be passed - Do a little bit of style(9) cleanup on lockmgr.h KPI results heavilly broken by this change, so manpages and FreeBSD_version will be modified accordingly by further commits. Tested by: matteo
2008-01-24 12:34:30 +00:00
lockmgr(vp->v_vnlock, LK_RELEASE, NULL);
Add snapshots to the fast filesystem. Most of the changes support the gating of system calls that cause modifications to the underlying filesystem. The gating can be enabled by any filesystem that needs to consistently suspend operations by adding the vop_stdgetwritemount to their set of vnops. Once gating is enabled, the function vfs_write_suspend stops all new write operations to a filesystem, allows any filesystem modifying system calls already in progress to complete, then sync's the filesystem to disk and returns. The function vfs_write_resume allows the suspended write operations to begin again. Gating is not added by default for all filesystems as for SMP systems it adds two extra locks to such critical kernel paths as the write system call. Thus, gating should only be added as needed. Details on the use and current status of snapshots in FFS can be found in /sys/ufs/ffs/README.snapshot so for brevity and timelyness is not included here. Unless and until you create a snapshot file, these changes should have no effect on your system (famous last words).
2000-07-11 22:07:57 +00:00
return (1);
}
if (lbn >= NDADDR)
This patch corrects the first round of panics and hangs reported with the new snapshot code. Update addaliasu to correctly implement the semantics of the old checkalias function. When a device vnode first comes into existence, check to see if an anonymous vnode for the same device was created at boot time by bdevvp(). If so, adopt the bdevvp vnode rather than creating a new vnode for the device. This corrects a problem which caused the kernel to panic when taking a snapshot of the root filesystem. Change the calling convention of vn_write_suspend_wait() to be the same as vn_start_write(). Split out softdep_flushworklist() from softdep_flushfiles() so that it can be used to clear the work queue when suspending filesystem operations. Access to buffers becomes recursive so that snapshots can recursively traverse their indirect blocks using ffs_copyonwrite() when checking for the need for copy on write when flushing one of their own indirect blocks. This eliminates a deadlock between the syncer daemon and a process taking a snapshot. Ensure that softdep_process_worklist() can never block because of a snapshot being taken. This eliminates a problem with buffer starvation. Cleanup change in ffs_sync() which did not synchronously wait when MNT_WAIT was specified. The result was an unclean filesystem panic when doing forcible unmount with heavy filesystem I/O in progress. Return a zero'ed block when reading a block that was not in use at the time that a snapshot was taken. Normally, these blocks should never be read. However, the readahead code will occationally read them which can cause unexpected behavior. Clean up the debugging code that ensures that no blocks be written on a filesystem while it is suspended. Snapshots must explicitly label the blocks that they are writing during the suspension so that they do not cause a `write on suspended filesystem' panic. Reorganize ffs_copyonwrite() to eliminate a deadlock and also to prevent a race condition that would permit the same block to be copied twice. This change eliminates an unexpected soft updates inconsistency in fsck caused by the double allocation. Use bqrelse rather than brelse for buffers that will be needed soon again by the snapshot code. This improves snapshot performance.
2000-07-24 05:28:33 +00:00
bqrelse(ibp);
Add snapshots to the fast filesystem. Most of the changes support the gating of system calls that cause modifications to the underlying filesystem. The gating can be enabled by any filesystem that needs to consistently suspend operations by adding the vop_stdgetwritemount to their set of vnops. Once gating is enabled, the function vfs_write_suspend stops all new write operations to a filesystem, allows any filesystem modifying system calls already in progress to complete, then sync's the filesystem to disk and returns. The function vfs_write_resume allows the suspended write operations to begin again. Gating is not added by default for all filesystems as for SMP systems it adds two extra locks to such critical kernel paths as the write system call. Thus, gating should only be added as needed. Details on the use and current status of snapshots in FFS can be found in /sys/ufs/ffs/README.snapshot so for brevity and timelyness is not included here. Unless and until you create a snapshot file, these changes should have no effect on your system (famous last words).
2000-07-11 22:07:57 +00:00
/*
* Allocate the block into which to do the copy. Note that this
* allocation will never require any additional allocations for
* the snapshot inode.
*/
Move the P_COWINPROGRESS flag from being a per-process p_flag to being a per-thread td_pflag which doesn't require any locks to read or write as it is only read or written by curthread on itself. Glanced at by: mckusick
2003-10-23 21:14:08 +00:00
td->td_pflags |= TDP_COWINPROGRESS;
VOP_BALLOC was never really a VOP in the first place, so convert it to UFS_BALLOC like the other "between UFS and FFS function interfaces".
2001-04-29 12:36:52 +00:00
error = UFS_BALLOC(vp, lblktosize(fs, (off_t)lbn),
Add snapshots to the fast filesystem. Most of the changes support the gating of system calls that cause modifications to the underlying filesystem. The gating can be enabled by any filesystem that needs to consistently suspend operations by adding the vop_stdgetwritemount to their set of vnops. Once gating is enabled, the function vfs_write_suspend stops all new write operations to a filesystem, allows any filesystem modifying system calls already in progress to complete, then sync's the filesystem to disk and returns. The function vfs_write_resume allows the suspended write operations to begin again. Gating is not added by default for all filesystems as for SMP systems it adds two extra locks to such critical kernel paths as the write system call. Thus, gating should only be added as needed. Details on the use and current status of snapshots in FFS can be found in /sys/ufs/ffs/README.snapshot so for brevity and timelyness is not included here. Unless and until you create a snapshot file, these changes should have no effect on your system (famous last words).
2000-07-11 22:07:57 +00:00
fs->fs_bsize, KERNCRED, 0, &cbp);
Move the P_COWINPROGRESS flag from being a per-process p_flag to being a per-thread td_pflag which doesn't require any locks to read or write as it is only read or written by curthread on itself. Glanced at by: mckusick
2003-10-23 21:14:08 +00:00
td->td_pflags &= ~TDP_COWINPROGRESS;
Remove a race condition / deadlock from snapshots. When converting from individual vnode locks to the snapshot lock, be sure to pass any waiting processes along to the new lock as well. This transfer is done by a new function in the lock manager, transferlockers(from_lock, to_lock); Thanks to Lamont Granquist <lamont@scriptkiddie.org> for his help in pounding on snapshots beyond all reason and finding this deadlock. Sponsored by: DARPA & NAI Labs.
2002-11-30 19:00:51 +00:00
if (error)
Add snapshots to the fast filesystem. Most of the changes support the gating of system calls that cause modifications to the underlying filesystem. The gating can be enabled by any filesystem that needs to consistently suspend operations by adding the vop_stdgetwritemount to their set of vnops. Once gating is enabled, the function vfs_write_suspend stops all new write operations to a filesystem, allows any filesystem modifying system calls already in progress to complete, then sync's the filesystem to disk and returns. The function vfs_write_resume allows the suspended write operations to begin again. Gating is not added by default for all filesystems as for SMP systems it adds two extra locks to such critical kernel paths as the write system call. Thus, gating should only be added as needed. Details on the use and current status of snapshots in FFS can be found in /sys/ufs/ffs/README.snapshot so for brevity and timelyness is not included here. Unless and until you create a snapshot file, these changes should have no effect on your system (famous last words).
2000-07-11 22:07:57 +00:00
break;
#ifdef DEBUG
if (snapdebug)
Fix up kernel sources to be ready for a 64-bit ino_t. Original code by: Gleb Kurtsou
2012-09-27 23:30:49 +00:00
printf("%s%ju lbn %jd %s %ju size %ld to blkno %jd\n",
"Copyonremove: snapino ", (uintmax_t)ip->i_number,
(intmax_t)lbn, "for inum", (uintmax_t)inum, size,
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
(intmax_t)cbp->b_blkno);
Add snapshots to the fast filesystem. Most of the changes support the gating of system calls that cause modifications to the underlying filesystem. The gating can be enabled by any filesystem that needs to consistently suspend operations by adding the vop_stdgetwritemount to their set of vnops. Once gating is enabled, the function vfs_write_suspend stops all new write operations to a filesystem, allows any filesystem modifying system calls already in progress to complete, then sync's the filesystem to disk and returns. The function vfs_write_resume allows the suspended write operations to begin again. Gating is not added by default for all filesystems as for SMP systems it adds two extra locks to such critical kernel paths as the write system call. Thus, gating should only be added as needed. Details on the use and current status of snapshots in FFS can be found in /sys/ufs/ffs/README.snapshot so for brevity and timelyness is not included here. Unless and until you create a snapshot file, these changes should have no effect on your system (famous last words).
2000-07-11 22:07:57 +00:00
#endif
/*
* If we have already read the old block contents, then
When closing the last reference to an unlinked file, it is freed by the inactive routine. Because the freeing causes the filesystem to be modified, the close must be held up during periods when the filesystem is suspended. For snapshots to be consistent across crashes, they must write blocks that they copy and claim those written blocks in their on-disk block pointers before the old blocks that they referenced can be allowed to be written. Close a loophole that allowed unwritten blocks to be skipped when doing ffs_sync with a request to wait for all I/O activity to be completed.
2001-04-25 08:11:18 +00:00
* simply copy them to the new block. Note that we need
* to synchronously write snapshots that have not been
* unlinked, and hence will be visible after a crash,
Ensure that filesystem metadata contained within persistent snapshots is always kept consistent. Suggested by: Jeff Roberson
2011-06-15 23:19:09 +00:00
* to ensure their integrity. At a minimum we ensure the
* integrity of the filesystem metadata, but use the
* dopersistence sysctl-setable flag to decide on the
* persistence needed for file content data.
Add snapshots to the fast filesystem. Most of the changes support the gating of system calls that cause modifications to the underlying filesystem. The gating can be enabled by any filesystem that needs to consistently suspend operations by adding the vop_stdgetwritemount to their set of vnops. Once gating is enabled, the function vfs_write_suspend stops all new write operations to a filesystem, allows any filesystem modifying system calls already in progress to complete, then sync's the filesystem to disk and returns. The function vfs_write_resume allows the suspended write operations to begin again. Gating is not added by default for all filesystems as for SMP systems it adds two extra locks to such critical kernel paths as the write system call. Thus, gating should only be added as needed. Details on the use and current status of snapshots in FFS can be found in /sys/ufs/ffs/README.snapshot so for brevity and timelyness is not included here. Unless and until you create a snapshot file, these changes should have no effect on your system (famous last words).
2000-07-11 22:07:57 +00:00
*/
if (savedcbp != 0) {
bcopy(savedcbp->b_data, cbp->b_data, fs->fs_bsize);
bawrite(cbp);
Ensure that filesystem metadata contained within persistent snapshots is always kept consistent. Suggested by: Jeff Roberson
2011-06-15 23:19:09 +00:00
if ((vtype == VDIR || dopersistence) &&
ip->i_effnlink > 0)
Add a third flags argument to ffs_syncvnode to avoid a possible conflict with MNT_WAIT flags that passed in its second argument. This will be MFC'ed together with r232351. Discussed with: kib
2012-03-25 00:02:37 +00:00
(void) ffs_syncvnode(vp, MNT_WAIT, NO_INO_UPDT);
Add snapshots to the fast filesystem. Most of the changes support the gating of system calls that cause modifications to the underlying filesystem. The gating can be enabled by any filesystem that needs to consistently suspend operations by adding the vop_stdgetwritemount to their set of vnops. Once gating is enabled, the function vfs_write_suspend stops all new write operations to a filesystem, allows any filesystem modifying system calls already in progress to complete, then sync's the filesystem to disk and returns. The function vfs_write_resume allows the suspended write operations to begin again. Gating is not added by default for all filesystems as for SMP systems it adds two extra locks to such critical kernel paths as the write system call. Thus, gating should only be added as needed. Details on the use and current status of snapshots in FFS can be found in /sys/ufs/ffs/README.snapshot so for brevity and timelyness is not included here. Unless and until you create a snapshot file, these changes should have no effect on your system (famous last words).
2000-07-11 22:07:57 +00:00
continue;
}
/*
* Otherwise, read the old block contents into the buffer.
*/
Create struct snapdata which contains the snapshot fields from cdev and the previously malloc'ed snapshot lock. Malloc struct snapdata instead of just the lock. Replace snapshot fields in cdev with pointer to snapdata (saves 16 bytes). While here, give the private readblock() function a vnode argument in preparation for moving UFS to access GEOM directly.
2004-09-13 07:29:45 +00:00
if ((error = readblock(vp, cbp, lbn)) != 0) {
When closing the last reference to an unlinked file, it is freed by the inactive routine. Because the freeing causes the filesystem to be modified, the close must be held up during periods when the filesystem is suspended. For snapshots to be consistent across crashes, they must write blocks that they copy and claim those written blocks in their on-disk block pointers before the old blocks that they referenced can be allowed to be written. Close a loophole that allowed unwritten blocks to be skipped when doing ffs_sync with a request to wait for all I/O activity to be completed.
2001-04-25 08:11:18 +00:00
bzero(cbp->b_data, fs->fs_bsize);
bawrite(cbp);
Ensure that filesystem metadata contained within persistent snapshots is always kept consistent. Suggested by: Jeff Roberson
2011-06-15 23:19:09 +00:00
if ((vtype == VDIR || dopersistence) &&
ip->i_effnlink > 0)
Add a third flags argument to ffs_syncvnode to avoid a possible conflict with MNT_WAIT flags that passed in its second argument. This will be MFC'ed together with r232351. Discussed with: kib
2012-03-25 00:02:37 +00:00
(void) ffs_syncvnode(vp, MNT_WAIT, NO_INO_UPDT);
Add snapshots to the fast filesystem. Most of the changes support the gating of system calls that cause modifications to the underlying filesystem. The gating can be enabled by any filesystem that needs to consistently suspend operations by adding the vop_stdgetwritemount to their set of vnops. Once gating is enabled, the function vfs_write_suspend stops all new write operations to a filesystem, allows any filesystem modifying system calls already in progress to complete, then sync's the filesystem to disk and returns. The function vfs_write_resume allows the suspended write operations to begin again. Gating is not added by default for all filesystems as for SMP systems it adds two extra locks to such critical kernel paths as the write system call. Thus, gating should only be added as needed. Details on the use and current status of snapshots in FFS can be found in /sys/ufs/ffs/README.snapshot so for brevity and timelyness is not included here. Unless and until you create a snapshot file, these changes should have no effect on your system (famous last words).
2000-07-11 22:07:57 +00:00
break;
When closing the last reference to an unlinked file, it is freed by the inactive routine. Because the freeing causes the filesystem to be modified, the close must be held up during periods when the filesystem is suspended. For snapshots to be consistent across crashes, they must write blocks that they copy and claim those written blocks in their on-disk block pointers before the old blocks that they referenced can be allowed to be written. Close a loophole that allowed unwritten blocks to be skipped when doing ffs_sync with a request to wait for all I/O activity to be completed.
2001-04-25 08:11:18 +00:00
}
Add snapshots to the fast filesystem. Most of the changes support the gating of system calls that cause modifications to the underlying filesystem. The gating can be enabled by any filesystem that needs to consistently suspend operations by adding the vop_stdgetwritemount to their set of vnops. Once gating is enabled, the function vfs_write_suspend stops all new write operations to a filesystem, allows any filesystem modifying system calls already in progress to complete, then sync's the filesystem to disk and returns. The function vfs_write_resume allows the suspended write operations to begin again. Gating is not added by default for all filesystems as for SMP systems it adds two extra locks to such critical kernel paths as the write system call. Thus, gating should only be added as needed. Details on the use and current status of snapshots in FFS can be found in /sys/ufs/ffs/README.snapshot so for brevity and timelyness is not included here. Unless and until you create a snapshot file, these changes should have no effect on your system (famous last words).
2000-07-11 22:07:57 +00:00
savedcbp = cbp;
}
When closing the last reference to an unlinked file, it is freed by the inactive routine. Because the freeing causes the filesystem to be modified, the close must be held up during periods when the filesystem is suspended. For snapshots to be consistent across crashes, they must write blocks that they copy and claim those written blocks in their on-disk block pointers before the old blocks that they referenced can be allowed to be written. Close a loophole that allowed unwritten blocks to be skipped when doing ffs_sync with a request to wait for all I/O activity to be completed.
2001-04-25 08:11:18 +00:00
/*
* Note that we need to synchronously write snapshots that
* have not been unlinked, and hence will be visible after
Ensure that filesystem metadata contained within persistent snapshots is always kept consistent. Suggested by: Jeff Roberson
2011-06-15 23:19:09 +00:00
* a crash, to ensure their integrity. At a minimum we
* ensure the integrity of the filesystem metadata, but
* use the dopersistence sysctl-setable flag to decide on
* the persistence needed for file content data.
When closing the last reference to an unlinked file, it is freed by the inactive routine. Because the freeing causes the filesystem to be modified, the close must be held up during periods when the filesystem is suspended. For snapshots to be consistent across crashes, they must write blocks that they copy and claim those written blocks in their on-disk block pointers before the old blocks that they referenced can be allowed to be written. Close a loophole that allowed unwritten blocks to be skipped when doing ffs_sync with a request to wait for all I/O activity to be completed.
2001-04-25 08:11:18 +00:00
*/
if (savedcbp) {
vp = savedcbp->b_vp;
Add snapshots to the fast filesystem. Most of the changes support the gating of system calls that cause modifications to the underlying filesystem. The gating can be enabled by any filesystem that needs to consistently suspend operations by adding the vop_stdgetwritemount to their set of vnops. Once gating is enabled, the function vfs_write_suspend stops all new write operations to a filesystem, allows any filesystem modifying system calls already in progress to complete, then sync's the filesystem to disk and returns. The function vfs_write_resume allows the suspended write operations to begin again. Gating is not added by default for all filesystems as for SMP systems it adds two extra locks to such critical kernel paths as the write system call. Thus, gating should only be added as needed. Details on the use and current status of snapshots in FFS can be found in /sys/ufs/ffs/README.snapshot so for brevity and timelyness is not included here. Unless and until you create a snapshot file, these changes should have no effect on your system (famous last words).
2000-07-11 22:07:57 +00:00
bawrite(savedcbp);
Fixed dereference of a NULL pointer. Reported by: Peter Holm
2011-06-18 21:10:03 +00:00
if ((vtype == VDIR || dopersistence) &&
VTOI(vp)->i_effnlink > 0)
Add a third flags argument to ffs_syncvnode to avoid a possible conflict with MNT_WAIT flags that passed in its second argument. This will be MFC'ed together with r232351. Discussed with: kib
2012-03-25 00:02:37 +00:00
(void) ffs_syncvnode(vp, MNT_WAIT, NO_INO_UPDT);
When closing the last reference to an unlinked file, it is freed by the inactive routine. Because the freeing causes the filesystem to be modified, the close must be held up during periods when the filesystem is suspended. For snapshots to be consistent across crashes, they must write blocks that they copy and claim those written blocks in their on-disk block pointers before the old blocks that they referenced can be allowed to be written. Close a loophole that allowed unwritten blocks to be skipped when doing ffs_sync with a request to wait for all I/O activity to be completed.
2001-04-25 08:11:18 +00:00
}
Add snapshots to the fast filesystem. Most of the changes support the gating of system calls that cause modifications to the underlying filesystem. The gating can be enabled by any filesystem that needs to consistently suspend operations by adding the vop_stdgetwritemount to their set of vnops. Once gating is enabled, the function vfs_write_suspend stops all new write operations to a filesystem, allows any filesystem modifying system calls already in progress to complete, then sync's the filesystem to disk and returns. The function vfs_write_resume allows the suspended write operations to begin again. Gating is not added by default for all filesystems as for SMP systems it adds two extra locks to such critical kernel paths as the write system call. Thus, gating should only be added as needed. Details on the use and current status of snapshots in FFS can be found in /sys/ufs/ffs/README.snapshot so for brevity and timelyness is not included here. Unless and until you create a snapshot file, these changes should have no effect on your system (famous last words).
2000-07-11 22:07:57 +00:00
/*
* If we have been unable to allocate a block in which to do
* the copy, then return non-zero so that the fragment will
* not be freed. Although space will be lost, the snapshot
* will stay consistent.
*/
Update to soft updates journaling to properly track freed blocks that get claimed by snapshots. Submitted by: Jeff Roberson Tested by: Peter Holm
2011-06-12 19:27:05 +00:00
if (error != 0 && wkhd != NULL)
softdep_freework(wkhd);
Cleanup lockmgr interface and exported KPI: - Remove the "thread" argument from the lockmgr() function as it is always curthread now - Axe lockcount() function as it is no longer used - Axe LOCKMGR_ASSERT() as it is bogus really and no currently used. Hopefully this will be soonly replaced by something suitable for it. - Remove the prototype for dumplockinfo() as the function is no longer present Addictionally: - Introduce a KASSERT() in lockstatus() in order to let it accept only curthread or NULL as they should only be passed - Do a little bit of style(9) cleanup on lockmgr.h KPI results heavilly broken by this change, so manpages and FreeBSD_version will be modified accordingly by further commits. Tested by: matteo
2008-01-24 12:34:30 +00:00
lockmgr(vp->v_vnlock, LK_RELEASE, NULL);
Add snapshots to the fast filesystem. Most of the changes support the gating of system calls that cause modifications to the underlying filesystem. The gating can be enabled by any filesystem that needs to consistently suspend operations by adding the vop_stdgetwritemount to their set of vnops. Once gating is enabled, the function vfs_write_suspend stops all new write operations to a filesystem, allows any filesystem modifying system calls already in progress to complete, then sync's the filesystem to disk and returns. The function vfs_write_resume allows the suspended write operations to begin again. Gating is not added by default for all filesystems as for SMP systems it adds two extra locks to such critical kernel paths as the write system call. Thus, gating should only be added as needed. Details on the use and current status of snapshots in FFS can be found in /sys/ufs/ffs/README.snapshot so for brevity and timelyness is not included here. Unless and until you create a snapshot file, these changes should have no effect on your system (famous last words).
2000-07-11 22:07:57 +00:00
return (error);
}
/*
* Associate snapshot files when mounting.
*/
void
ffs_snapshot_mount(mp)
struct mount *mp;
{
struct ufsmount *ump = VFSTOUFS(mp);
Remove a race condition / deadlock from snapshots. When converting from individual vnode locks to the snapshot lock, be sure to pass any waiting processes along to the new lock as well. This transfer is done by a new function in the lock manager, transferlockers(from_lock, to_lock); Thanks to Lamont Granquist <lamont@scriptkiddie.org> for his help in pounding on snapshots beyond all reason and finding this deadlock. Sponsored by: DARPA & NAI Labs.
2002-11-30 19:00:51 +00:00
struct vnode *devvp = ump->um_devvp;
Add snapshots to the fast filesystem. Most of the changes support the gating of system calls that cause modifications to the underlying filesystem. The gating can be enabled by any filesystem that needs to consistently suspend operations by adding the vop_stdgetwritemount to their set of vnops. Once gating is enabled, the function vfs_write_suspend stops all new write operations to a filesystem, allows any filesystem modifying system calls already in progress to complete, then sync's the filesystem to disk and returns. The function vfs_write_resume allows the suspended write operations to begin again. Gating is not added by default for all filesystems as for SMP systems it adds two extra locks to such critical kernel paths as the write system call. Thus, gating should only be added as needed. Details on the use and current status of snapshots in FFS can be found in /sys/ufs/ffs/README.snapshot so for brevity and timelyness is not included here. Unless and until you create a snapshot file, these changes should have no effect on your system (famous last words).
2000-07-11 22:07:57 +00:00
struct fs *fs = ump->um_fs;
KSE Milestone 2 Note ALL MODULES MUST BE RECOMPILED make the kernel aware that there are smaller units of scheduling than the process. (but only allow one thread per process at this time). This is functionally equivalent to teh previousl -current except that there is a thread associated with each process. Sorry john! (your next MFC will be a doosie!) Reviewed by: peter@freebsd.org, dillon@freebsd.org X-MFC after: ha ha ha ha
2001-09-12 08:38:13 +00:00
struct thread *td = curthread;
Create struct snapdata which contains the snapshot fields from cdev and the previously malloc'ed snapshot lock. Malloc struct snapdata instead of just the lock. Replace snapshot fields in cdev with pointer to snapdata (saves 16 bytes). While here, give the private readblock() function a vnode argument in preparation for moving UFS to access GEOM directly.
2004-09-13 07:29:45 +00:00
struct snapdata *sn;
Add snapshots to the fast filesystem. Most of the changes support the gating of system calls that cause modifications to the underlying filesystem. The gating can be enabled by any filesystem that needs to consistently suspend operations by adding the vop_stdgetwritemount to their set of vnops. Once gating is enabled, the function vfs_write_suspend stops all new write operations to a filesystem, allows any filesystem modifying system calls already in progress to complete, then sync's the filesystem to disk and returns. The function vfs_write_resume allows the suspended write operations to begin again. Gating is not added by default for all filesystems as for SMP systems it adds two extra locks to such critical kernel paths as the write system call. Thus, gating should only be added as needed. Details on the use and current status of snapshots in FFS can be found in /sys/ufs/ffs/README.snapshot so for brevity and timelyness is not included here. Unless and until you create a snapshot file, these changes should have no effect on your system (famous last words).
2000-07-11 22:07:57 +00:00
struct vnode *vp;
Read block hints list from last snapshot on the active snapshot list.
2006-05-16 00:14:20 +00:00
struct vnode *lastvp;
Missed a place where snapshots were allocated in my last commit to this file.
2004-09-16 15:58:18 +00:00
struct inode *ip;
When creating a snapshot, create a list of initially allocated blocks. Whenever doing a copy-on-write check, first look in the list of initially allocated blocks to see if it is there. If so, no further check is needed. If not, fall through and do the full check. This change eliminates one of two known deadlocks caused by snapshots. Handling the second deadlock will be the subject of another check-in. This change also reduces the cost of the copy-on-write check by speeding up the verification of frequently checked blocks. Sponsored by: DARPA & NAI Labs.
2002-10-09 06:13:48 +00:00
struct uio auio;
struct iovec aiov;
Only the most recent snapshot contains the complete list of blocks that were copied in all of the earlier snapshots, thus its precomputed list must be used in the copyonwrite test. Using incomplete lists may lead to deadlock. Also do not include the blocks used for the indirect pointers in the indirect pointers as this may lead to inconsistent snapshots. Sponsored by: DARPA & NAI Labs. Approved by: re
2002-12-14 01:36:59 +00:00
void *snapblklist;
When creating a snapshot, create a list of initially allocated blocks. Whenever doing a copy-on-write check, first look in the list of initially allocated blocks to see if it is there. If so, no further check is needed. If not, fall through and do the full check. This change eliminates one of two known deadlocks caused by snapshots. Handling the second deadlock will be the subject of another check-in. This change also reduces the cost of the copy-on-write check by speeding up the verification of frequently checked blocks. Sponsored by: DARPA & NAI Labs.
2002-10-09 06:13:48 +00:00
char *reason;
Only the most recent snapshot contains the complete list of blocks that were copied in all of the earlier snapshots, thus its precomputed list must be used in the copyonwrite test. Using incomplete lists may lead to deadlock. Also do not include the blocks used for the indirect pointers in the indirect pointers as this may lead to inconsistent snapshots. Sponsored by: DARPA & NAI Labs. Approved by: re
2002-12-14 01:36:59 +00:00
daddr_t snaplistsize;
Add snapshots to the fast filesystem. Most of the changes support the gating of system calls that cause modifications to the underlying filesystem. The gating can be enabled by any filesystem that needs to consistently suspend operations by adding the vop_stdgetwritemount to their set of vnops. Once gating is enabled, the function vfs_write_suspend stops all new write operations to a filesystem, allows any filesystem modifying system calls already in progress to complete, then sync's the filesystem to disk and returns. The function vfs_write_resume allows the suspended write operations to begin again. Gating is not added by default for all filesystems as for SMP systems it adds two extra locks to such critical kernel paths as the write system call. Thus, gating should only be added as needed. Details on the use and current status of snapshots in FFS can be found in /sys/ufs/ffs/README.snapshot so for brevity and timelyness is not included here. Unless and until you create a snapshot file, these changes should have no effect on your system (famous last words).
2000-07-11 22:07:57 +00:00
int error, snaploc, loc;
When creating a snapshot, create a list of initially allocated blocks. Whenever doing a copy-on-write check, first look in the list of initially allocated blocks to see if it is there. If so, no further check is needed. If not, fall through and do the full check. This change eliminates one of two known deadlocks caused by snapshots. Handling the second deadlock will be the subject of another check-in. This change also reduces the cost of the copy-on-write check by speeding up the verification of frequently checked blocks. Sponsored by: DARPA & NAI Labs.
2002-10-09 06:13:48 +00:00
/*
Don't use the UFS_* and VFS_* functions where a direct call is possble. The UFS_ functions are for UFS to call back into VFS. The VFS functions are external entry points into the filesystem.
2005-02-08 17:40:01 +00:00
* XXX The following needs to be set before ffs_truncate or
When creating a snapshot, create a list of initially allocated blocks. Whenever doing a copy-on-write check, first look in the list of initially allocated blocks to see if it is there. If so, no further check is needed. If not, fall through and do the full check. This change eliminates one of two known deadlocks caused by snapshots. Handling the second deadlock will be the subject of another check-in. This change also reduces the cost of the copy-on-write check by speeding up the verification of frequently checked blocks. Sponsored by: DARPA & NAI Labs.
2002-10-09 06:13:48 +00:00
* VOP_READ can be called.
*/
mp->mnt_stat.f_iosize = fs->fs_bsize;
/*
* Process each snapshot listed in the superblock.
*/
Only the most recent snapshot contains the complete list of blocks that were copied in all of the earlier snapshots, thus its precomputed list must be used in the copyonwrite test. Using incomplete lists may lead to deadlock. Also do not include the blocks used for the indirect pointers in the indirect pointers as this may lead to inconsistent snapshots. Sponsored by: DARPA & NAI Labs. Approved by: re
2002-12-14 01:36:59 +00:00
vp = NULL;
Read block hints list from last snapshot on the active snapshot list.
2006-05-16 00:14:20 +00:00
lastvp = NULL;
- Don't free snapdata structures when they are no longer in use. Keeping the lockmgr lock valid allows us to switch the v_lock pointer in snapshot vnodes between the embedded lockmgr lock and snapdata lock without needing the vnode interlock to protect against races - Keep unused snapdata structures in a list. - Add a function to lock the devvp and allocate a snapdata to it or acquire a new one without races. The old function was safe from creation races because we set the mount flag when creating snapshots and thus serializing them. However, it might have been subject to destroying races. Reviewed by: tegge
2008-03-31 07:47:08 +00:00
sn = NULL;
Add snapshots to the fast filesystem. Most of the changes support the gating of system calls that cause modifications to the underlying filesystem. The gating can be enabled by any filesystem that needs to consistently suspend operations by adding the vop_stdgetwritemount to their set of vnops. Once gating is enabled, the function vfs_write_suspend stops all new write operations to a filesystem, allows any filesystem modifying system calls already in progress to complete, then sync's the filesystem to disk and returns. The function vfs_write_resume allows the suspended write operations to begin again. Gating is not added by default for all filesystems as for SMP systems it adds two extra locks to such critical kernel paths as the write system call. Thus, gating should only be added as needed. Details on the use and current status of snapshots in FFS can be found in /sys/ufs/ffs/README.snapshot so for brevity and timelyness is not included here. Unless and until you create a snapshot file, these changes should have no effect on your system (famous last words).
2000-07-11 22:07:57 +00:00
for (snaploc = 0; snaploc < FSMAXSNAP; snaploc++) {
if (fs->fs_snapinum[snaploc] == 0)
Only the most recent snapshot contains the complete list of blocks that were copied in all of the earlier snapshots, thus its precomputed list must be used in the copyonwrite test. Using incomplete lists may lead to deadlock. Also do not include the blocks used for the indirect pointers in the indirect pointers as this may lead to inconsistent snapshots. Sponsored by: DARPA & NAI Labs. Approved by: re
2002-12-14 01:36:59 +00:00
break;
Don't use the UFS_* and VFS_* functions where a direct call is possble. The UFS_ functions are for UFS to call back into VFS. The VFS functions are external entry points into the filesystem.
2005-02-08 17:40:01 +00:00
if ((error = ffs_vget(mp, fs->fs_snapinum[snaploc],
Add a flags parameter to VFS_VGET to pass through the desired locking flags when acquiring a vnode. The immediate purpose is to allow polling lock requests (LK_NOWAIT) needed by soft updates to avoid deadlock when enlisting other processes to help with the background cleanup. For the future it will allow the use of shared locks for read access to vnodes. This change touches a lot of files as it affects most filesystems within the system. It has been well tested on FFS, loopback, and CD-ROM filesystems. only lightly on the others, so if you find a problem there, please let me (mckusick@mckusick.com) know.
2002-03-17 01:25:47 +00:00
LK_EXCLUSIVE, &vp)) != 0){
Add snapshots to the fast filesystem. Most of the changes support the gating of system calls that cause modifications to the underlying filesystem. The gating can be enabled by any filesystem that needs to consistently suspend operations by adding the vop_stdgetwritemount to their set of vnops. Once gating is enabled, the function vfs_write_suspend stops all new write operations to a filesystem, allows any filesystem modifying system calls already in progress to complete, then sync's the filesystem to disk and returns. The function vfs_write_resume allows the suspended write operations to begin again. Gating is not added by default for all filesystems as for SMP systems it adds two extra locks to such critical kernel paths as the write system call. Thus, gating should only be added as needed. Details on the use and current status of snapshots in FFS can be found in /sys/ufs/ffs/README.snapshot so for brevity and timelyness is not included here. Unless and until you create a snapshot file, these changes should have no effect on your system (famous last words).
2000-07-11 22:07:57 +00:00
printf("ffs_snapshot_mount: vget failed %d\n", error);
continue;
}
ip = VTOI(vp);
This change avoids a kernel deadlock on "snaplk" when using snapshots on UFS filesystems running with journaled soft updates. This is the first of several bugs that need to be fixed before removing the restriction added in -r230250 to prevent the use of snapshots on filesystems running with journaled soft updates. The deadlock occurs when holding the snapshot lock (snaplk) and then trying to flush an inode via ffs_update(). We become blocked by another process trying to flush a different inode contained in the same inode block that we need. It holds the inode block for which we are waiting locked. When it tries to write the inode block, it gets blocked waiting for the our snaplk when it calls ffs_copyonwrite() to see if the inode block needs to be copied in our snapshot. The most obvious place that this deadlock arises is in the ffs_copyonwrite() routine when it updates critical metadata in a snapshot and tries to write it out before proceeding. The fix here is to write the data and indirect block pointer for the snapshot, but to skip the call to ffs_update() to write the snapshot inode. To ensure that we will never have to update a pointer in the inode itself, the ffs_snapshot() routine that creates the snapshot has to ensure that all the direct blocks are allocated as part of the creation of the snapshot. A less obvious place that this deadlock occurs is when we hold the snaplk because we are deleting a snapshot. In the course of doing the deletion, we need to allocate various soft update dependency structures and allocate some journal space. If we hit a resource limit while doing this we decrease the resources in use by flushing out an existing dirty file to get it to give up the soft dependency resources that it holds. The flush can cause an ffs_update() to be done on the inode for the file that we have selected to flush resulting in the same deadlock as described above when the inode that we have chosen to flush resides in the same inode block as the snapshot inode that we hold. The fix is to defer cleaning up any time that the inode on which we are operating is a snapshot. Help and review by: Jeff Roberson Tested by: Peter Holm MFC (to 9 only) after: 2 weeks
2012-03-01 18:45:25 +00:00
if (!IS_SNAPSHOT(ip) || ip->i_size ==
When creating a snapshot, create a list of initially allocated blocks. Whenever doing a copy-on-write check, first look in the list of initially allocated blocks to see if it is there. If so, no further check is needed. If not, fall through and do the full check. This change eliminates one of two known deadlocks caused by snapshots. Handling the second deadlock will be the subject of another check-in. This change also reduces the cost of the copy-on-write check by speeding up the verification of frequently checked blocks. Sponsored by: DARPA & NAI Labs.
2002-10-09 06:13:48 +00:00
lblktosize(fs, howmany(fs->fs_size, fs->fs_frag))) {
This change avoids a kernel deadlock on "snaplk" when using snapshots on UFS filesystems running with journaled soft updates. This is the first of several bugs that need to be fixed before removing the restriction added in -r230250 to prevent the use of snapshots on filesystems running with journaled soft updates. The deadlock occurs when holding the snapshot lock (snaplk) and then trying to flush an inode via ffs_update(). We become blocked by another process trying to flush a different inode contained in the same inode block that we need. It holds the inode block for which we are waiting locked. When it tries to write the inode block, it gets blocked waiting for the our snaplk when it calls ffs_copyonwrite() to see if the inode block needs to be copied in our snapshot. The most obvious place that this deadlock arises is in the ffs_copyonwrite() routine when it updates critical metadata in a snapshot and tries to write it out before proceeding. The fix here is to write the data and indirect block pointer for the snapshot, but to skip the call to ffs_update() to write the snapshot inode. To ensure that we will never have to update a pointer in the inode itself, the ffs_snapshot() routine that creates the snapshot has to ensure that all the direct blocks are allocated as part of the creation of the snapshot. A less obvious place that this deadlock occurs is when we hold the snaplk because we are deleting a snapshot. In the course of doing the deletion, we need to allocate various soft update dependency structures and allocate some journal space. If we hit a resource limit while doing this we decrease the resources in use by flushing out an existing dirty file to get it to give up the soft dependency resources that it holds. The flush can cause an ffs_update() to be done on the inode for the file that we have selected to flush resulting in the same deadlock as described above when the inode that we have chosen to flush resides in the same inode block as the snapshot inode that we hold. The fix is to defer cleaning up any time that the inode on which we are operating is a snapshot. Help and review by: Jeff Roberson Tested by: Peter Holm MFC (to 9 only) after: 2 weeks
2012-03-01 18:45:25 +00:00
if (!IS_SNAPSHOT(ip)) {
When creating a snapshot, create a list of initially allocated blocks. Whenever doing a copy-on-write check, first look in the list of initially allocated blocks to see if it is there. If so, no further check is needed. If not, fall through and do the full check. This change eliminates one of two known deadlocks caused by snapshots. Handling the second deadlock will be the subject of another check-in. This change also reduces the cost of the copy-on-write check by speeding up the verification of frequently checked blocks. Sponsored by: DARPA & NAI Labs.
2002-10-09 06:13:48 +00:00
reason = "non-snapshot";
} else {
reason = "old format snapshot";
Remove unused thread argument from vtruncbuf(). Reviewed by: kib
2012-04-23 13:21:28 +00:00
(void)ffs_truncate(vp, (off_t)0, 0, NOCRED);
Add a third flags argument to ffs_syncvnode to avoid a possible conflict with MNT_WAIT flags that passed in its second argument. This will be MFC'ed together with r232351. Discussed with: kib
2012-03-25 00:02:37 +00:00
(void)ffs_syncvnode(vp, MNT_WAIT, 0);
When creating a snapshot, create a list of initially allocated blocks. Whenever doing a copy-on-write check, first look in the list of initially allocated blocks to see if it is there. If so, no further check is needed. If not, fall through and do the full check. This change eliminates one of two known deadlocks caused by snapshots. Handling the second deadlock will be the subject of another check-in. This change also reduces the cost of the copy-on-write check by speeding up the verification of frequently checked blocks. Sponsored by: DARPA & NAI Labs.
2002-10-09 06:13:48 +00:00
}
printf("ffs_snapshot_mount: %s inode %d\n",
reason, fs->fs_snapinum[snaploc]);
Add snapshots to the fast filesystem. Most of the changes support the gating of system calls that cause modifications to the underlying filesystem. The gating can be enabled by any filesystem that needs to consistently suspend operations by adding the vop_stdgetwritemount to their set of vnops. Once gating is enabled, the function vfs_write_suspend stops all new write operations to a filesystem, allows any filesystem modifying system calls already in progress to complete, then sync's the filesystem to disk and returns. The function vfs_write_resume allows the suspended write operations to begin again. Gating is not added by default for all filesystems as for SMP systems it adds two extra locks to such critical kernel paths as the write system call. Thus, gating should only be added as needed. Details on the use and current status of snapshots in FFS can be found in /sys/ufs/ffs/README.snapshot so for brevity and timelyness is not included here. Unless and until you create a snapshot file, these changes should have no effect on your system (famous last words).
2000-07-11 22:07:57 +00:00
vput(vp);
Only the most recent snapshot contains the complete list of blocks that were copied in all of the earlier snapshots, thus its precomputed list must be used in the copyonwrite test. Using incomplete lists may lead to deadlock. Also do not include the blocks used for the indirect pointers in the indirect pointers as this may lead to inconsistent snapshots. Sponsored by: DARPA & NAI Labs. Approved by: re
2002-12-14 01:36:59 +00:00
vp = NULL;
Add snapshots to the fast filesystem. Most of the changes support the gating of system calls that cause modifications to the underlying filesystem. The gating can be enabled by any filesystem that needs to consistently suspend operations by adding the vop_stdgetwritemount to their set of vnops. Once gating is enabled, the function vfs_write_suspend stops all new write operations to a filesystem, allows any filesystem modifying system calls already in progress to complete, then sync's the filesystem to disk and returns. The function vfs_write_resume allows the suspended write operations to begin again. Gating is not added by default for all filesystems as for SMP systems it adds two extra locks to such critical kernel paths as the write system call. Thus, gating should only be added as needed. Details on the use and current status of snapshots in FFS can be found in /sys/ufs/ffs/README.snapshot so for brevity and timelyness is not included here. Unless and until you create a snapshot file, these changes should have no effect on your system (famous last words).
2000-07-11 22:07:57 +00:00
for (loc = snaploc + 1; loc < FSMAXSNAP; loc++) {
if (fs->fs_snapinum[loc] == 0)
break;
fs->fs_snapinum[loc - 1] = fs->fs_snapinum[loc];
}
fs->fs_snapinum[loc - 1] = 0;
snaploc--;
continue;
}
Change locking so that all snapshots on a particular filesystem share a common lock. This change avoids a deadlock between snapshots when separate requests cause them to deadlock checking each other for a need to copy blocks that are close enough together that they fall into the same indirect block. Although I had anticipated a slowdown from contention for the single lock, my filesystem benchmarks show no measurable change in throughput on a uniprocessor system with three active snapshots. I conjecture that this result is because every copy-on-write fault must check all the active snapshots, so the process was inherently serial already. This change removes the last of the deadlocks of which I am aware in snapshots. Sponsored by: DARPA & NAI Labs.
2002-10-16 00:19:23 +00:00
/*
- Don't free snapdata structures when they are no longer in use. Keeping the lockmgr lock valid allows us to switch the v_lock pointer in snapshot vnodes between the embedded lockmgr lock and snapdata lock without needing the vnode interlock to protect against races - Keep unused snapdata structures in a list. - Add a function to lock the devvp and allocate a snapdata to it or acquire a new one without races. The old function was safe from creation races because we set the mount flag when creating snapshots and thus serializing them. However, it might have been subject to destroying races. Reviewed by: tegge
2008-03-31 07:47:08 +00:00
* Acquire a lock on the snapdata structure, creating it if
* necessary.
Change locking so that all snapshots on a particular filesystem share a common lock. This change avoids a deadlock between snapshots when separate requests cause them to deadlock checking each other for a need to copy blocks that are close enough together that they fall into the same indirect block. Although I had anticipated a slowdown from contention for the single lock, my filesystem benchmarks show no measurable change in throughput on a uniprocessor system with three active snapshots. I conjecture that this result is because every copy-on-write fault must check all the active snapshots, so the process was inherently serial already. This change removes the last of the deadlocks of which I am aware in snapshots. Sponsored by: DARPA & NAI Labs.
2002-10-16 00:19:23 +00:00
*/
- Don't free snapdata structures when they are no longer in use. Keeping the lockmgr lock valid allows us to switch the v_lock pointer in snapshot vnodes between the embedded lockmgr lock and snapdata lock without needing the vnode interlock to protect against races - Keep unused snapdata structures in a list. - Add a function to lock the devvp and allocate a snapdata to it or acquire a new one without races. The old function was safe from creation races because we set the mount flag when creating snapshots and thus serializing them. However, it might have been subject to destroying races. Reviewed by: tegge
2008-03-31 07:47:08 +00:00
sn = ffs_snapdata_acquire(devvp);
/*
* Change vnode to use shared snapshot lock instead of the
* original private lock.
*/
vp->v_vnlock = &sn->sn_lock;
Cleanup lockmgr interface and exported KPI: - Remove the "thread" argument from the lockmgr() function as it is always curthread now - Axe lockcount() function as it is no longer used - Axe LOCKMGR_ASSERT() as it is bogus really and no currently used. Hopefully this will be soonly replaced by something suitable for it. - Remove the prototype for dumplockinfo() as the function is no longer present Addictionally: - Introduce a KASSERT() in lockstatus() in order to let it accept only curthread or NULL as they should only be passed - Do a little bit of style(9) cleanup on lockmgr.h KPI results heavilly broken by this change, so manpages and FreeBSD_version will be modified accordingly by further commits. Tested by: matteo
2008-01-24 12:34:30 +00:00
lockmgr(&vp->v_lock, LK_RELEASE, NULL);
When creating a snapshot, create a list of initially allocated blocks. Whenever doing a copy-on-write check, first look in the list of initially allocated blocks to see if it is there. If so, no further check is needed. If not, fall through and do the full check. This change eliminates one of two known deadlocks caused by snapshots. Handling the second deadlock will be the subject of another check-in. This change also reduces the cost of the copy-on-write check by speeding up the verification of frequently checked blocks. Sponsored by: DARPA & NAI Labs.
2002-10-09 06:13:48 +00:00
/*
* Link it onto the active snapshot list.
*/
Remove a race condition / deadlock from snapshots. When converting from individual vnode locks to the snapshot lock, be sure to pass any waiting processes along to the new lock as well. This transfer is done by a new function in the lock manager, transferlockers(from_lock, to_lock); Thanks to Lamont Granquist <lamont@scriptkiddie.org> for his help in pounding on snapshots beyond all reason and finding this deadlock. Sponsored by: DARPA & NAI Labs.
2002-11-30 19:00:51 +00:00
VI_LOCK(devvp);
Fixes to track snapshot copy-on-write checking in the specinfo structure rather than assuming that the device vnode would reside in the FFS filesystem (which is obviously a broken assumption with the device filesystem).
2001-03-07 07:09:55 +00:00
if (ip->i_nextsnap.tqe_prev != 0)
Fix up kernel sources to be ready for a 64-bit ino_t. Original code by: Gleb Kurtsou
2012-09-27 23:30:49 +00:00
panic("ffs_snapshot_mount: %ju already on list",
(uintmax_t)ip->i_number);
Fixes to track snapshot copy-on-write checking in the specinfo structure rather than assuming that the device vnode would reside in the FFS filesystem (which is obviously a broken assumption with the device filesystem).
2001-03-07 07:09:55 +00:00
else
Create struct snapdata which contains the snapshot fields from cdev and the previously malloc'ed snapshot lock. Malloc struct snapdata instead of just the lock. Replace snapshot fields in cdev with pointer to snapdata (saves 16 bytes). While here, give the private readblock() function a vnode argument in preparation for moving UFS to access GEOM directly.
2004-09-13 07:29:45 +00:00
TAILQ_INSERT_TAIL(&sn->sn_head, ip, i_nextsnap);
- Replace v_flag with v_iflag and v_vflag - v_vflag is protected by the vnode lock and is used when synchronization with VOP calls is needed. - v_iflag is protected by interlock and is used for dealing with vnode management issues. These flags include X/O LOCK, FREE, DOOMED, etc. - All accesses to v_iflag and v_vflag have either been locked or marked with mp_fixme's. - Many ASSERT_VOP_LOCKED calls have been added where the locking was not clear. - Many functions in vfs_subr.c were restructured to provide for stronger locking. Idea stolen from: BSD/OS
2002-08-04 10:29:36 +00:00
vp->v_vflag |= VV_SYSTEM;
Remove a race condition / deadlock from snapshots. When converting from individual vnode locks to the snapshot lock, be sure to pass any waiting processes along to the new lock as well. This transfer is done by a new function in the lock manager, transferlockers(from_lock, to_lock); Thanks to Lamont Granquist <lamont@scriptkiddie.org> for his help in pounding on snapshots beyond all reason and finding this deadlock. Sponsored by: DARPA & NAI Labs.
2002-11-30 19:00:51 +00:00
VI_UNLOCK(devvp);
VOP_LOCK1() (and so VOP_LOCK()) and VOP_UNLOCK() are only used in conjuction with 'thread' argument passing which is always curthread. Remove the unuseful extra-argument and pass explicitly curthread to lower layer functions, when necessary. KPI results broken by this change, which should affect several ports, so version bumping and manpage update will be further committed. Tested by: kris, pho, Diego Sardina <siarodx at gmail dot com>
2008-01-13 14:44:15 +00:00
VOP_UNLOCK(vp, 0);
Read block hints list from last snapshot on the active snapshot list.
2006-05-16 00:14:20 +00:00
lastvp = vp;
Add snapshots to the fast filesystem. Most of the changes support the gating of system calls that cause modifications to the underlying filesystem. The gating can be enabled by any filesystem that needs to consistently suspend operations by adding the vop_stdgetwritemount to their set of vnops. Once gating is enabled, the function vfs_write_suspend stops all new write operations to a filesystem, allows any filesystem modifying system calls already in progress to complete, then sync's the filesystem to disk and returns. The function vfs_write_resume allows the suspended write operations to begin again. Gating is not added by default for all filesystems as for SMP systems it adds two extra locks to such critical kernel paths as the write system call. Thus, gating should only be added as needed. Details on the use and current status of snapshots in FFS can be found in /sys/ufs/ffs/README.snapshot so for brevity and timelyness is not included here. Unless and until you create a snapshot file, these changes should have no effect on your system (famous last words).
2000-07-11 22:07:57 +00:00
}
Read block hints list from last snapshot on the active snapshot list.
2006-05-16 00:14:20 +00:00
vp = lastvp;
Only the most recent snapshot contains the complete list of blocks that were copied in all of the earlier snapshots, thus its precomputed list must be used in the copyonwrite test. Using incomplete lists may lead to deadlock. Also do not include the blocks used for the indirect pointers in the indirect pointers as this may lead to inconsistent snapshots. Sponsored by: DARPA & NAI Labs. Approved by: re
2002-12-14 01:36:59 +00:00
/*
* No usable snapshots found.
*/
- Don't free snapdata structures when they are no longer in use. Keeping the lockmgr lock valid allows us to switch the v_lock pointer in snapshot vnodes between the embedded lockmgr lock and snapdata lock without needing the vnode interlock to protect against races - Keep unused snapdata structures in a list. - Add a function to lock the devvp and allocate a snapdata to it or acquire a new one without races. The old function was safe from creation races because we set the mount flag when creating snapshots and thus serializing them. However, it might have been subject to destroying races. Reviewed by: tegge
2008-03-31 07:47:08 +00:00
if (sn == NULL || vp == NULL)
Only the most recent snapshot contains the complete list of blocks that were copied in all of the earlier snapshots, thus its precomputed list must be used in the copyonwrite test. Using incomplete lists may lead to deadlock. Also do not include the blocks used for the indirect pointers in the indirect pointers as this may lead to inconsistent snapshots. Sponsored by: DARPA & NAI Labs. Approved by: re
2002-12-14 01:36:59 +00:00
return;
/*
* Allocate the space for the block hints list. We always want to
* use the list from the newest snapshot.
*/
auio.uio_iov = &aiov;
auio.uio_iovcnt = 1;
aiov.iov_base = (void *)&snaplistsize;
aiov.iov_len = sizeof(snaplistsize);
auio.uio_resid = aiov.iov_len;
auio.uio_offset =
lblktosize(fs, howmany(fs->fs_size, fs->fs_frag));
auio.uio_segflg = UIO_SYSSPACE;
auio.uio_rw = UIO_READ;
auio.uio_td = td;
vn_lock() is currently only used with the 'curthread' passed as argument. Remove this argument and pass curthread directly to underlying VOP_LOCK1() VFS method. This modify makes the code cleaner and in particular remove an annoying dependence helping next lockmgr() cleanup. KPI results, obviously, changed. Manpage and FreeBSD_version will be updated through further commits. As a side note, would be valuable to say that next commits will address a similar cleanup about VFS methods, in particular vop_lock1 and vop_unlock. Tested by: Diego Sardina <siarodx at gmail dot com>, Andrea Di Pasquale <whyx dot it at gmail dot com>
2008-01-10 01:10:58 +00:00
vn_lock(vp, LK_EXCLUSIVE | LK_RETRY);
Only the most recent snapshot contains the complete list of blocks that were copied in all of the earlier snapshots, thus its precomputed list must be used in the copyonwrite test. Using incomplete lists may lead to deadlock. Also do not include the blocks used for the indirect pointers in the indirect pointers as this may lead to inconsistent snapshots. Sponsored by: DARPA & NAI Labs. Approved by: re
2002-12-14 01:36:59 +00:00
if ((error = VOP_READ(vp, &auio, IO_UNIT, td->td_ucred)) != 0) {
printf("ffs_snapshot_mount: read_1 failed %d\n", error);
VOP_LOCK1() (and so VOP_LOCK()) and VOP_UNLOCK() are only used in conjuction with 'thread' argument passing which is always curthread. Remove the unuseful extra-argument and pass explicitly curthread to lower layer functions, when necessary. KPI results broken by this change, which should affect several ports, so version bumping and manpage update will be further committed. Tested by: kris, pho, Diego Sardina <siarodx at gmail dot com>
2008-01-13 14:44:15 +00:00
VOP_UNLOCK(vp, 0);
Only the most recent snapshot contains the complete list of blocks that were copied in all of the earlier snapshots, thus its precomputed list must be used in the copyonwrite test. Using incomplete lists may lead to deadlock. Also do not include the blocks used for the indirect pointers in the indirect pointers as this may lead to inconsistent snapshots. Sponsored by: DARPA & NAI Labs. Approved by: re
2002-12-14 01:36:59 +00:00
return;
}
Retire the MALLOC and FREE macros. They are an abomination unto style(9). MFC after: 3 months
2008-10-23 15:53:51 +00:00
snapblklist = malloc(snaplistsize * sizeof(daddr_t),
Back out M_* changes, per decision of the TRB. Approved by: trb
2003-02-19 05:47:46 +00:00
M_UFSMNT, M_WAITOK);
Only the most recent snapshot contains the complete list of blocks that were copied in all of the earlier snapshots, thus its precomputed list must be used in the copyonwrite test. Using incomplete lists may lead to deadlock. Also do not include the blocks used for the indirect pointers in the indirect pointers as this may lead to inconsistent snapshots. Sponsored by: DARPA & NAI Labs. Approved by: re
2002-12-14 01:36:59 +00:00
auio.uio_iovcnt = 1;
aiov.iov_base = snapblklist;
aiov.iov_len = snaplistsize * sizeof (daddr_t);
auio.uio_resid = aiov.iov_len;
auio.uio_offset -= sizeof(snaplistsize);
if ((error = VOP_READ(vp, &auio, IO_UNIT, td->td_ucred)) != 0) {
printf("ffs_snapshot_mount: read_2 failed %d\n", error);
VOP_LOCK1() (and so VOP_LOCK()) and VOP_UNLOCK() are only used in conjuction with 'thread' argument passing which is always curthread. Remove the unuseful extra-argument and pass explicitly curthread to lower layer functions, when necessary. KPI results broken by this change, which should affect several ports, so version bumping and manpage update will be further committed. Tested by: kris, pho, Diego Sardina <siarodx at gmail dot com>
2008-01-13 14:44:15 +00:00
VOP_UNLOCK(vp, 0);
Retire the MALLOC and FREE macros. They are an abomination unto style(9). MFC after: 3 months
2008-10-23 15:53:51 +00:00
free(snapblklist, M_UFSMNT);
Only the most recent snapshot contains the complete list of blocks that were copied in all of the earlier snapshots, thus its precomputed list must be used in the copyonwrite test. Using incomplete lists may lead to deadlock. Also do not include the blocks used for the indirect pointers in the indirect pointers as this may lead to inconsistent snapshots. Sponsored by: DARPA & NAI Labs. Approved by: re
2002-12-14 01:36:59 +00:00
return;
}
VOP_LOCK1() (and so VOP_LOCK()) and VOP_UNLOCK() are only used in conjuction with 'thread' argument passing which is always curthread. Remove the unuseful extra-argument and pass explicitly curthread to lower layer functions, when necessary. KPI results broken by this change, which should affect several ports, so version bumping and manpage update will be further committed. Tested by: kris, pho, Diego Sardina <siarodx at gmail dot com>
2008-01-13 14:44:15 +00:00
VOP_UNLOCK(vp, 0);
Only the most recent snapshot contains the complete list of blocks that were copied in all of the earlier snapshots, thus its precomputed list must be used in the copyonwrite test. Using incomplete lists may lead to deadlock. Also do not include the blocks used for the indirect pointers in the indirect pointers as this may lead to inconsistent snapshots. Sponsored by: DARPA & NAI Labs. Approved by: re
2002-12-14 01:36:59 +00:00
VI_LOCK(devvp);
ASSERT_VOP_LOCKED(devvp, "ffs_snapshot_mount");
Create struct snapdata which contains the snapshot fields from cdev and the previously malloc'ed snapshot lock. Malloc struct snapdata instead of just the lock. Replace snapshot fields in cdev with pointer to snapdata (saves 16 bytes). While here, give the private readblock() function a vnode argument in preparation for moving UFS to access GEOM directly.
2004-09-13 07:29:45 +00:00
sn->sn_listsize = snaplistsize;
sn->sn_blklist = (daddr_t *)snapblklist;
Only the most recent snapshot contains the complete list of blocks that were copied in all of the earlier snapshots, thus its precomputed list must be used in the copyonwrite test. Using incomplete lists may lead to deadlock. Also do not include the blocks used for the indirect pointers in the indirect pointers as this may lead to inconsistent snapshots. Sponsored by: DARPA & NAI Labs. Approved by: re
2002-12-14 01:36:59 +00:00
devvp->v_vflag |= VV_COPYONWRITE;
VI_UNLOCK(devvp);
Add snapshots to the fast filesystem. Most of the changes support the gating of system calls that cause modifications to the underlying filesystem. The gating can be enabled by any filesystem that needs to consistently suspend operations by adding the vop_stdgetwritemount to their set of vnops. Once gating is enabled, the function vfs_write_suspend stops all new write operations to a filesystem, allows any filesystem modifying system calls already in progress to complete, then sync's the filesystem to disk and returns. The function vfs_write_resume allows the suspended write operations to begin again. Gating is not added by default for all filesystems as for SMP systems it adds two extra locks to such critical kernel paths as the write system call. Thus, gating should only be added as needed. Details on the use and current status of snapshots in FFS can be found in /sys/ufs/ffs/README.snapshot so for brevity and timelyness is not included here. Unless and until you create a snapshot file, these changes should have no effect on your system (famous last words).
2000-07-11 22:07:57 +00:00
}
/*
* Disassociate snapshot files when unmounting.
*/
void
ffs_snapshot_unmount(mp)
struct mount *mp;
{
Remove a race condition / deadlock from snapshots. When converting from individual vnode locks to the snapshot lock, be sure to pass any waiting processes along to the new lock as well. This transfer is done by a new function in the lock manager, transferlockers(from_lock, to_lock); Thanks to Lamont Granquist <lamont@scriptkiddie.org> for his help in pounding on snapshots beyond all reason and finding this deadlock. Sponsored by: DARPA & NAI Labs.
2002-11-30 19:00:51 +00:00
struct vnode *devvp = VFSTOUFS(mp)->um_devvp;
Create struct snapdata which contains the snapshot fields from cdev and the previously malloc'ed snapshot lock. Malloc struct snapdata instead of just the lock. Replace snapshot fields in cdev with pointer to snapdata (saves 16 bytes). While here, give the private readblock() function a vnode argument in preparation for moving UFS to access GEOM directly.
2004-09-13 07:29:45 +00:00
struct snapdata *sn;
Add snapshots to the fast filesystem. Most of the changes support the gating of system calls that cause modifications to the underlying filesystem. The gating can be enabled by any filesystem that needs to consistently suspend operations by adding the vop_stdgetwritemount to their set of vnops. Once gating is enabled, the function vfs_write_suspend stops all new write operations to a filesystem, allows any filesystem modifying system calls already in progress to complete, then sync's the filesystem to disk and returns. The function vfs_write_resume allows the suspended write operations to begin again. Gating is not added by default for all filesystems as for SMP systems it adds two extra locks to such critical kernel paths as the write system call. Thus, gating should only be added as needed. Details on the use and current status of snapshots in FFS can be found in /sys/ufs/ffs/README.snapshot so for brevity and timelyness is not included here. Unless and until you create a snapshot file, these changes should have no effect on your system (famous last words).
2000-07-11 22:07:57 +00:00
struct inode *xp;
Change locking so that all snapshots on a particular filesystem share a common lock. This change avoids a deadlock between snapshots when separate requests cause them to deadlock checking each other for a need to copy blocks that are close enough together that they fall into the same indirect block. Although I had anticipated a slowdown from contention for the single lock, my filesystem benchmarks show no measurable change in throughput on a uniprocessor system with three active snapshots. I conjecture that this result is because every copy-on-write fault must check all the active snapshots, so the process was inherently serial already. This change removes the last of the deadlocks of which I am aware in snapshots. Sponsored by: DARPA & NAI Labs.
2002-10-16 00:19:23 +00:00
struct vnode *vp;
Add snapshots to the fast filesystem. Most of the changes support the gating of system calls that cause modifications to the underlying filesystem. The gating can be enabled by any filesystem that needs to consistently suspend operations by adding the vop_stdgetwritemount to their set of vnops. Once gating is enabled, the function vfs_write_suspend stops all new write operations to a filesystem, allows any filesystem modifying system calls already in progress to complete, then sync's the filesystem to disk and returns. The function vfs_write_resume allows the suspended write operations to begin again. Gating is not added by default for all filesystems as for SMP systems it adds two extra locks to such critical kernel paths as the write system call. Thus, gating should only be added as needed. Details on the use and current status of snapshots in FFS can be found in /sys/ufs/ffs/README.snapshot so for brevity and timelyness is not included here. Unless and until you create a snapshot file, these changes should have no effect on your system (famous last words).
2000-07-11 22:07:57 +00:00
Remove a race condition / deadlock from snapshots. When converting from individual vnode locks to the snapshot lock, be sure to pass any waiting processes along to the new lock as well. This transfer is done by a new function in the lock manager, transferlockers(from_lock, to_lock); Thanks to Lamont Granquist <lamont@scriptkiddie.org> for his help in pounding on snapshots beyond all reason and finding this deadlock. Sponsored by: DARPA & NAI Labs.
2002-11-30 19:00:51 +00:00
VI_LOCK(devvp);
Close a race when VOP_LOCK() on a snapshot file is attempted at the same time as it is changed back into a normal file. The locker would get the shared "snaplk" lock which would no longer be the correct lock for the vnode.
2006-05-02 23:52:43 +00:00
sn = devvp->v_rdev->si_snapdata;
while (sn != NULL && (xp = TAILQ_FIRST(&sn->sn_head)) != NULL) {
Change locking so that all snapshots on a particular filesystem share a common lock. This change avoids a deadlock between snapshots when separate requests cause them to deadlock checking each other for a need to copy blocks that are close enough together that they fall into the same indirect block. Although I had anticipated a slowdown from contention for the single lock, my filesystem benchmarks show no measurable change in throughput on a uniprocessor system with three active snapshots. I conjecture that this result is because every copy-on-write fault must check all the active snapshots, so the process was inherently serial already. This change removes the last of the deadlocks of which I am aware in snapshots. Sponsored by: DARPA & NAI Labs.
2002-10-16 00:19:23 +00:00
vp = ITOV(xp);
Create struct snapdata which contains the snapshot fields from cdev and the previously malloc'ed snapshot lock. Malloc struct snapdata instead of just the lock. Replace snapshot fields in cdev with pointer to snapdata (saves 16 bytes). While here, give the private readblock() function a vnode argument in preparation for moving UFS to access GEOM directly.
2004-09-13 07:29:45 +00:00
TAILQ_REMOVE(&sn->sn_head, xp, i_nextsnap);
Fixes to track snapshot copy-on-write checking in the specinfo structure rather than assuming that the device vnode would reside in the FFS filesystem (which is obviously a broken assumption with the device filesystem).
2001-03-07 07:09:55 +00:00
xp->i_nextsnap.tqe_prev = 0;
Cleanup lockmgr interface and exported KPI: - Remove the "thread" argument from the lockmgr() function as it is always curthread now - Axe lockcount() function as it is no longer used - Axe LOCKMGR_ASSERT() as it is bogus really and no currently used. Hopefully this will be soonly replaced by something suitable for it. - Remove the prototype for dumplockinfo() as the function is no longer present Addictionally: - Introduce a KASSERT() in lockstatus() in order to let it accept only curthread or NULL as they should only be passed - Do a little bit of style(9) cleanup on lockmgr.h KPI results heavilly broken by this change, so manpages and FreeBSD_version will be modified accordingly by further commits. Tested by: matteo
2008-01-24 12:34:30 +00:00
lockmgr(&sn->sn_lock, LK_INTERLOCK | LK_EXCLUSIVE,
VI_MTX(devvp));
- Don't free snapdata structures when they are no longer in use. Keeping the lockmgr lock valid allows us to switch the v_lock pointer in snapshot vnodes between the embedded lockmgr lock and snapdata lock without needing the vnode interlock to protect against races - Keep unused snapdata structures in a list. - Add a function to lock the devvp and allocate a snapdata to it or acquire a new one without races. The old function was safe from creation races because we set the mount flag when creating snapshots and thus serializing them. However, it might have been subject to destroying races. Reviewed by: tegge
2008-03-31 07:47:08 +00:00
lockmgr(&vp->v_lock, LK_EXCLUSIVE, NULL);
Close a race when VOP_LOCK() on a snapshot file is attempted at the same time as it is changed back into a normal file. The locker would get the shared "snaplk" lock which would no longer be the correct lock for the vnode.
2006-05-02 23:52:43 +00:00
KASSERT(vp->v_vnlock == &sn->sn_lock,
("ffs_snapshot_unmount: lost lock mutation"));
vp->v_vnlock = &vp->v_lock;
Cleanup lockmgr interface and exported KPI: - Remove the "thread" argument from the lockmgr() function as it is always curthread now - Axe lockcount() function as it is no longer used - Axe LOCKMGR_ASSERT() as it is bogus really and no currently used. Hopefully this will be soonly replaced by something suitable for it. - Remove the prototype for dumplockinfo() as the function is no longer present Addictionally: - Introduce a KASSERT() in lockstatus() in order to let it accept only curthread or NULL as they should only be passed - Do a little bit of style(9) cleanup on lockmgr.h KPI results heavilly broken by this change, so manpages and FreeBSD_version will be modified accordingly by further commits. Tested by: matteo
2008-01-24 12:34:30 +00:00
lockmgr(&vp->v_lock, LK_RELEASE, NULL);
lockmgr(&sn->sn_lock, LK_RELEASE, NULL);
Close a race when VOP_LOCK() on a snapshot file is attempted at the same time as it is changed back into a normal file. The locker would get the shared "snaplk" lock which would no longer be the correct lock for the vnode.
2006-05-02 23:52:43 +00:00
if (xp->i_effnlink > 0)
Change locking so that all snapshots on a particular filesystem share a common lock. This change avoids a deadlock between snapshots when separate requests cause them to deadlock checking each other for a need to copy blocks that are close enough together that they fall into the same indirect block. Although I had anticipated a slowdown from contention for the single lock, my filesystem benchmarks show no measurable change in throughput on a uniprocessor system with three active snapshots. I conjecture that this result is because every copy-on-write fault must check all the active snapshots, so the process was inherently serial already. This change removes the last of the deadlocks of which I am aware in snapshots. Sponsored by: DARPA & NAI Labs.
2002-10-16 00:19:23 +00:00
vrele(vp);
Close a race when VOP_LOCK() on a snapshot file is attempted at the same time as it is changed back into a normal file. The locker would get the shared "snaplk" lock which would no longer be the correct lock for the vnode.
2006-05-02 23:52:43 +00:00
VI_LOCK(devvp);
sn = devvp->v_rdev->si_snapdata;
Add snapshots to the fast filesystem. Most of the changes support the gating of system calls that cause modifications to the underlying filesystem. The gating can be enabled by any filesystem that needs to consistently suspend operations by adding the vop_stdgetwritemount to their set of vnops. Once gating is enabled, the function vfs_write_suspend stops all new write operations to a filesystem, allows any filesystem modifying system calls already in progress to complete, then sync's the filesystem to disk and returns. The function vfs_write_resume allows the suspended write operations to begin again. Gating is not added by default for all filesystems as for SMP systems it adds two extra locks to such critical kernel paths as the write system call. Thus, gating should only be added as needed. Details on the use and current status of snapshots in FFS can be found in /sys/ufs/ffs/README.snapshot so for brevity and timelyness is not included here. Unless and until you create a snapshot file, these changes should have no effect on your system (famous last words).
2000-07-11 22:07:57 +00:00
}
- Don't free snapdata structures when they are no longer in use. Keeping the lockmgr lock valid allows us to switch the v_lock pointer in snapshot vnodes between the embedded lockmgr lock and snapdata lock without needing the vnode interlock to protect against races - Keep unused snapdata structures in a list. - Add a function to lock the devvp and allocate a snapdata to it or acquire a new one without races. The old function was safe from creation races because we set the mount flag when creating snapshots and thus serializing them. However, it might have been subject to destroying races. Reviewed by: tegge
2008-03-31 07:47:08 +00:00
try_free_snapdata(devvp);
Remove a race condition / deadlock from snapshots. When converting from individual vnode locks to the snapshot lock, be sure to pass any waiting processes along to the new lock as well. This transfer is done by a new function in the lock manager, transferlockers(from_lock, to_lock); Thanks to Lamont Granquist <lamont@scriptkiddie.org> for his help in pounding on snapshots beyond all reason and finding this deadlock. Sponsored by: DARPA & NAI Labs.
2002-11-30 19:00:51 +00:00
ASSERT_VOP_LOCKED(devvp, "ffs_snapshot_unmount");
Add snapshots to the fast filesystem. Most of the changes support the gating of system calls that cause modifications to the underlying filesystem. The gating can be enabled by any filesystem that needs to consistently suspend operations by adding the vop_stdgetwritemount to their set of vnops. Once gating is enabled, the function vfs_write_suspend stops all new write operations to a filesystem, allows any filesystem modifying system calls already in progress to complete, then sync's the filesystem to disk and returns. The function vfs_write_resume allows the suspended write operations to begin again. Gating is not added by default for all filesystems as for SMP systems it adds two extra locks to such critical kernel paths as the write system call. Thus, gating should only be added as needed. Details on the use and current status of snapshots in FFS can be found in /sys/ufs/ffs/README.snapshot so for brevity and timelyness is not included here. Unless and until you create a snapshot file, these changes should have no effect on your system (famous last words).
2000-07-11 22:07:57 +00:00
}
Cylinder group bitmaps and blocks containing inode for a snapshot file are after snaplock, while other ffs device buffers are before snaplock in global lock order. By itself, this could cause deadlock when bdwrite() tries to flush dirty buffers on snapshotted ffs. If, during the flush, COW activity for snapshot needs to allocate block and ffs_alloccg() selects the cylinder group that is being written by bdwrite(), then kernel would panic due to recursive buffer lock acquision. Avoid dealing with buffers in bdwrite() that are from other side of snaplock divisor in the lock order then the buffer being written. Add new BOP, bop_bdwrite(), to do dirty buffer flushing for same vnode in the bdwrite(). Default implementation, bufbdflush(), refactors the code from bdwrite(). For ffs device buffers, specialized implementation is used. Reviewed by: tegge, jeff, Russell Cattelan (cattelan xfs org, xfs changes) Tested by: Peter Holm X-MFC after: 3 weeks (if ever: it changes ABI)
2007-01-23 10:01:19 +00:00
/*
* Check the buffer block to be belong to device buffer that shall be
* locked after snaplk. devvp shall be locked on entry, and will be
* leaved locked upon exit.
*/
static int
ffs_bp_snapblk(devvp, bp)
struct vnode *devvp;
struct buf *bp;
{
struct snapdata *sn;
struct fs *fs;
ufs2_daddr_t lbn, *snapblklist;
int lower, upper, mid;
ASSERT_VI_LOCKED(devvp, "ffs_bp_snapblk");
KASSERT(devvp->v_type == VCHR, ("Not a device %p", devvp));
sn = devvp->v_rdev->si_snapdata;
if (sn == NULL || TAILQ_FIRST(&sn->sn_head) == NULL)
return (0);
fs = TAILQ_FIRST(&sn->sn_head)->i_fs;
lbn = fragstoblks(fs, dbtofsb(fs, bp->b_blkno));
snapblklist = sn->sn_blklist;
upper = sn->sn_listsize - 1;
lower = 1;
while (lower <= upper) {
mid = (lower + upper) / 2;
if (snapblklist[mid] == lbn)
break;
if (snapblklist[mid] < lbn)
lower = mid + 1;
else
upper = mid - 1;
}
if (lower <= upper)
return (1);
return (0);
}
void
ffs_bdflush(bo, bp)
struct bufobj *bo;
struct buf *bp;
{
struct thread *td;
struct vnode *vp, *devvp;
struct buf *nbp;
int bp_bdskip;
if (bo->bo_dirty.bv_cnt <= dirtybufthresh)
return;
td = curthread;
vp = bp->b_vp;
devvp = bo->__bo_vnode;
KASSERT(vp == devvp, ("devvp != vp %p %p", bo, bp));
VI_LOCK(devvp);
bp_bdskip = ffs_bp_snapblk(devvp, bp);
if (bp_bdskip)
bdwriteskip++;
VI_UNLOCK(devvp);
if (bo->bo_dirty.bv_cnt > dirtybufthresh + 10 && !bp_bdskip) {
(void) VOP_FSYNC(vp, MNT_NOWAIT, td);
altbufferflushes++;
} else {
BO_LOCK(bo);
/*
* Try to find a buffer to flush.
*/
TAILQ_FOREACH(nbp, &bo->bo_dirty.bv_hd, b_bobufs) {
if ((nbp->b_vflags & BV_BKGRDINPROG) ||
BUF_LOCK(nbp,
LK_EXCLUSIVE | LK_NOWAIT, NULL))
continue;
if (bp == nbp)
panic("bdwrite: found ourselves");
BO_UNLOCK(bo);
/*
* Don't countdeps with the bo lock
* held.
*/
if (buf_countdeps(nbp, 0)) {
BO_LOCK(bo);
BUF_UNLOCK(nbp);
continue;
}
if (bp_bdskip) {
VI_LOCK(devvp);
if (!ffs_bp_snapblk(vp, nbp)) {
- Convert the bufobj lock to rwlock. - Use a shared bufobj lock in getblk() and inmem(). - Convert softdep's lk to rwlock to match the bufobj lock. - Move INFREECNT to b_flags and protect it with the buf lock. - Remove unnecessary locking around bremfree() and BKGRDINPROG. Sponsored by: EMC / Isilon Storage Division Discussed with: mckusick, kib, mdf
2013-05-31 00:43:41 +00:00
VI_UNLOCK(devvp);
BO_LOCK(bo);
Cylinder group bitmaps and blocks containing inode for a snapshot file are after snaplock, while other ffs device buffers are before snaplock in global lock order. By itself, this could cause deadlock when bdwrite() tries to flush dirty buffers on snapshotted ffs. If, during the flush, COW activity for snapshot needs to allocate block and ffs_alloccg() selects the cylinder group that is being written by bdwrite(), then kernel would panic due to recursive buffer lock acquision. Avoid dealing with buffers in bdwrite() that are from other side of snaplock divisor in the lock order then the buffer being written. Add new BOP, bop_bdwrite(), to do dirty buffer flushing for same vnode in the bdwrite(). Default implementation, bufbdflush(), refactors the code from bdwrite(). For ffs device buffers, specialized implementation is used. Reviewed by: tegge, jeff, Russell Cattelan (cattelan xfs org, xfs changes) Tested by: Peter Holm X-MFC after: 3 weeks (if ever: it changes ABI)
2007-01-23 10:01:19 +00:00
BUF_UNLOCK(nbp);
continue;
}
VI_UNLOCK(devvp);
}
if (nbp->b_flags & B_CLUSTEROK) {
vfs_bio_awrite(nbp);
} else {
bremfree(nbp);
bawrite(nbp);
}
dirtybufferflushes++;
break;
}
if (nbp == NULL)
BO_UNLOCK(bo);
}
}
Add snapshots to the fast filesystem. Most of the changes support the gating of system calls that cause modifications to the underlying filesystem. The gating can be enabled by any filesystem that needs to consistently suspend operations by adding the vop_stdgetwritemount to their set of vnops. Once gating is enabled, the function vfs_write_suspend stops all new write operations to a filesystem, allows any filesystem modifying system calls already in progress to complete, then sync's the filesystem to disk and returns. The function vfs_write_resume allows the suspended write operations to begin again. Gating is not added by default for all filesystems as for SMP systems it adds two extra locks to such critical kernel paths as the write system call. Thus, gating should only be added as needed. Details on the use and current status of snapshots in FFS can be found in /sys/ufs/ffs/README.snapshot so for brevity and timelyness is not included here. Unless and until you create a snapshot file, these changes should have no effect on your system (famous last words).
2000-07-11 22:07:57 +00:00
/*
* Check for need to copy block that is about to be written,
* copying the block if necessary.
*/
Degeneralize the per cdev copyonwrite callback. The only possible value is ffs_copyonwrite() and the only place it can be called from is FFS which would never want to call another filesystems copyonwrite method, should one exist, so there is no reason why anything generic should know about this.
2004-10-26 06:25:56 +00:00
int
Fixes to track snapshot copy-on-write checking in the specinfo structure rather than assuming that the device vnode would reside in the FFS filesystem (which is obviously a broken assumption with the device filesystem).
2001-03-07 07:09:55 +00:00
ffs_copyonwrite(devvp, bp)
struct vnode *devvp;
struct buf *bp;
Add snapshots to the fast filesystem. Most of the changes support the gating of system calls that cause modifications to the underlying filesystem. The gating can be enabled by any filesystem that needs to consistently suspend operations by adding the vop_stdgetwritemount to their set of vnops. Once gating is enabled, the function vfs_write_suspend stops all new write operations to a filesystem, allows any filesystem modifying system calls already in progress to complete, then sync's the filesystem to disk and returns. The function vfs_write_resume allows the suspended write operations to begin again. Gating is not added by default for all filesystems as for SMP systems it adds two extra locks to such critical kernel paths as the write system call. Thus, gating should only be added as needed. Details on the use and current status of snapshots in FFS can be found in /sys/ufs/ffs/README.snapshot so for brevity and timelyness is not included here. Unless and until you create a snapshot file, these changes should have no effect on your system (famous last words).
2000-07-11 22:07:57 +00:00
{
Create struct snapdata which contains the snapshot fields from cdev and the previously malloc'ed snapshot lock. Malloc struct snapdata instead of just the lock. Replace snapshot fields in cdev with pointer to snapdata (saves 16 bytes). While here, give the private readblock() function a vnode argument in preparation for moving UFS to access GEOM directly.
2004-09-13 07:29:45 +00:00
struct snapdata *sn;
Use NULL instead of 0 for pointers
2012-07-22 15:40:31 +00:00
struct buf *ibp, *cbp, *savedcbp = NULL;
KSE Milestone 2 Note ALL MODULES MUST BE RECOMPILED make the kernel aware that there are smaller units of scheduling than the process. (but only allow one thread per process at this time). This is functionally equivalent to teh previousl -current except that there is a thread associated with each process. Sorry john! (your next MFC will be a doosie!) Reviewed by: peter@freebsd.org, dillon@freebsd.org X-MFC after: ha ha ha ha
2001-09-12 08:38:13 +00:00
struct thread *td = curthread;
Fixes to track snapshot copy-on-write checking in the specinfo structure rather than assuming that the device vnode would reside in the FFS filesystem (which is obviously a broken assumption with the device filesystem).
2001-03-07 07:09:55 +00:00
struct fs *fs;
Add snapshots to the fast filesystem. Most of the changes support the gating of system calls that cause modifications to the underlying filesystem. The gating can be enabled by any filesystem that needs to consistently suspend operations by adding the vop_stdgetwritemount to their set of vnops. Once gating is enabled, the function vfs_write_suspend stops all new write operations to a filesystem, allows any filesystem modifying system calls already in progress to complete, then sync's the filesystem to disk and returns. The function vfs_write_resume allows the suspended write operations to begin again. Gating is not added by default for all filesystems as for SMP systems it adds two extra locks to such critical kernel paths as the write system call. Thus, gating should only be added as needed. Details on the use and current status of snapshots in FFS can be found in /sys/ufs/ffs/README.snapshot so for brevity and timelyness is not included here. Unless and until you create a snapshot file, these changes should have no effect on your system (famous last words).
2000-07-11 22:07:57 +00:00
struct inode *ip;
Use NULL instead of 0 for pointers
2012-07-22 15:40:31 +00:00
struct vnode *vp = NULL;
Only the most recent snapshot contains the complete list of blocks that were copied in all of the earlier snapshots, thus its precomputed list must be used in the copyonwrite test. Using incomplete lists may lead to deadlock. Also do not include the blocks used for the indirect pointers in the indirect pointers as this may lead to inconsistent snapshots. Sponsored by: DARPA & NAI Labs. Approved by: re
2002-12-14 01:36:59 +00:00
ufs2_daddr_t lbn, blkno, *snapblklist;
Reduce the probability of low block numbers passed to ffs_snapblkfree() by skipping the call from ffs_snapremove() if the block number is zero. Simplify snapshot locking in ffs_copyonwrite() and ffs_snapblkfree() by using the same locking protocol for low block numbers as for larger block numbers. This removes a lock leak that could happen if vn_lock() succeeded after lockmgr() failed in ffs_snapblkfree(). Check if snapshot is gone before retrying a lock in ffs_copyonwrite().
2005-10-09 19:45:01 +00:00
int lower, upper, mid, indiroff, error = 0;
Un-staticize waitrunningbufspace() and call it before returning from ffs_copyonwrite() if any async writes were launched. Restore the threads previous TDP_NORUNNINGBUF state before returning from ffs_copyonwrite().
2005-09-30 18:07:41 +00:00
int launched_async_io, prev_norunningbuf;
A side effect of calling runningbufwakeup() is that bp->b_runningbufspace is cleared. Save old value and restore bp->b_runningbufspace before returning from ffs_copyonwrite().
2006-05-03 00:04:38 +00:00
long saved_runningbufspace;
Add snapshots to the fast filesystem. Most of the changes support the gating of system calls that cause modifications to the underlying filesystem. The gating can be enabled by any filesystem that needs to consistently suspend operations by adding the vop_stdgetwritemount to their set of vnops. Once gating is enabled, the function vfs_write_suspend stops all new write operations to a filesystem, allows any filesystem modifying system calls already in progress to complete, then sync's the filesystem to disk and returns. The function vfs_write_resume allows the suspended write operations to begin again. Gating is not added by default for all filesystems as for SMP systems it adds two extra locks to such critical kernel paths as the write system call. Thus, gating should only be added as needed. Details on the use and current status of snapshots in FFS can be found in /sys/ufs/ffs/README.snapshot so for brevity and timelyness is not included here. Unless and until you create a snapshot file, these changes should have no effect on your system (famous last words).
2000-07-11 22:07:57 +00:00
This change avoids a kernel deadlock on "snaplk" when using snapshots on UFS filesystems running with journaled soft updates. This is the first of several bugs that need to be fixed before removing the restriction added in -r230250 to prevent the use of snapshots on filesystems running with journaled soft updates. The deadlock occurs when holding the snapshot lock (snaplk) and then trying to flush an inode via ffs_update(). We become blocked by another process trying to flush a different inode contained in the same inode block that we need. It holds the inode block for which we are waiting locked. When it tries to write the inode block, it gets blocked waiting for the our snaplk when it calls ffs_copyonwrite() to see if the inode block needs to be copied in our snapshot. The most obvious place that this deadlock arises is in the ffs_copyonwrite() routine when it updates critical metadata in a snapshot and tries to write it out before proceeding. The fix here is to write the data and indirect block pointer for the snapshot, but to skip the call to ffs_update() to write the snapshot inode. To ensure that we will never have to update a pointer in the inode itself, the ffs_snapshot() routine that creates the snapshot has to ensure that all the direct blocks are allocated as part of the creation of the snapshot. A less obvious place that this deadlock occurs is when we hold the snaplk because we are deleting a snapshot. In the course of doing the deletion, we need to allocate various soft update dependency structures and allocate some journal space. If we hit a resource limit while doing this we decrease the resources in use by flushing out an existing dirty file to get it to give up the soft dependency resources that it holds. The flush can cause an ffs_update() to be done on the inode for the file that we have selected to flush resulting in the same deadlock as described above when the inode that we have chosen to flush resides in the same inode block as the snapshot inode that we hold. The fix is to defer cleaning up any time that the inode on which we are operating is a snapshot. Help and review by: Jeff Roberson Tested by: Peter Holm MFC (to 9 only) after: 2 weeks
2012-03-01 18:45:25 +00:00
if (devvp != bp->b_vp && IS_SNAPSHOT(VTOI(bp->b_vp)))
Eliminate a deadlock that can occur when a dirty block belonging to a snapshot file is flushed by a process not holding snaplk (e.g. bufdaemon). Another process might hold snaplk and try to access the block due to ffs_copyonwrite processing.
2005-10-09 20:07:51 +00:00
return (0); /* Update on a snapshot file */
Move the P_COWINPROGRESS flag from being a per-process p_flag to being a per-thread td_pflag which doesn't require any locks to read or write as it is only read or written by curthread on itself. Glanced at by: mckusick
2003-10-23 21:14:08 +00:00
if (td->td_pflags & TDP_COWINPROGRESS)
Add snapshots to the fast filesystem. Most of the changes support the gating of system calls that cause modifications to the underlying filesystem. The gating can be enabled by any filesystem that needs to consistently suspend operations by adding the vop_stdgetwritemount to their set of vnops. Once gating is enabled, the function vfs_write_suspend stops all new write operations to a filesystem, allows any filesystem modifying system calls already in progress to complete, then sync's the filesystem to disk and returns. The function vfs_write_resume allows the suspended write operations to begin again. Gating is not added by default for all filesystems as for SMP systems it adds two extra locks to such critical kernel paths as the write system call. Thus, gating should only be added as needed. Details on the use and current status of snapshots in FFS can be found in /sys/ufs/ffs/README.snapshot so for brevity and timelyness is not included here. Unless and until you create a snapshot file, these changes should have no effect on your system (famous last words).
2000-07-11 22:07:57 +00:00
panic("ffs_copyonwrite: recursive call");
Only the most recent snapshot contains the complete list of blocks that were copied in all of the earlier snapshots, thus its precomputed list must be used in the copyonwrite test. Using incomplete lists may lead to deadlock. Also do not include the blocks used for the indirect pointers in the indirect pointers as this may lead to inconsistent snapshots. Sponsored by: DARPA & NAI Labs. Approved by: re
2002-12-14 01:36:59 +00:00
/*
* First check to see if it is in the preallocated list.
* By doing this check we avoid several potential deadlocks.
*/
Remove a race condition / deadlock from snapshots. When converting from individual vnode locks to the snapshot lock, be sure to pass any waiting processes along to the new lock as well. This transfer is done by a new function in the lock manager, transferlockers(from_lock, to_lock); Thanks to Lamont Granquist <lamont@scriptkiddie.org> for his help in pounding on snapshots beyond all reason and finding this deadlock. Sponsored by: DARPA & NAI Labs.
2002-11-30 19:00:51 +00:00
VI_LOCK(devvp);
Create struct snapdata which contains the snapshot fields from cdev and the previously malloc'ed snapshot lock. Malloc struct snapdata instead of just the lock. Replace snapshot fields in cdev with pointer to snapdata (saves 16 bytes). While here, give the private readblock() function a vnode argument in preparation for moving UFS to access GEOM directly.
2004-09-13 07:29:45 +00:00
sn = devvp->v_rdev->si_snapdata;
Reduce the probability of low block numbers passed to ffs_snapblkfree() by skipping the call from ffs_snapremove() if the block number is zero. Simplify snapshot locking in ffs_copyonwrite() and ffs_snapblkfree() by using the same locking protocol for low block numbers as for larger block numbers. This removes a lock leak that could happen if vn_lock() succeeded after lockmgr() failed in ffs_snapblkfree(). Check if snapshot is gone before retrying a lock in ffs_copyonwrite().
2005-10-09 19:45:01 +00:00
if (sn == NULL ||
Use *_EMPTY macros when appropriate.
2007-04-04 07:29:53 +00:00
TAILQ_EMPTY(&sn->sn_head)) {
Reduce the probability of low block numbers passed to ffs_snapblkfree() by skipping the call from ffs_snapremove() if the block number is zero. Simplify snapshot locking in ffs_copyonwrite() and ffs_snapblkfree() by using the same locking protocol for low block numbers as for larger block numbers. This removes a lock leak that could happen if vn_lock() succeeded after lockmgr() failed in ffs_snapblkfree(). Check if snapshot is gone before retrying a lock in ffs_copyonwrite().
2005-10-09 19:45:01 +00:00
VI_UNLOCK(devvp);
return (0); /* No snapshot */
}
Create struct snapdata which contains the snapshot fields from cdev and the previously malloc'ed snapshot lock. Malloc struct snapdata instead of just the lock. Replace snapshot fields in cdev with pointer to snapdata (saves 16 bytes). While here, give the private readblock() function a vnode argument in preparation for moving UFS to access GEOM directly.
2004-09-13 07:29:45 +00:00
ip = TAILQ_FIRST(&sn->sn_head);
Change locking so that all snapshots on a particular filesystem share a common lock. This change avoids a deadlock between snapshots when separate requests cause them to deadlock checking each other for a need to copy blocks that are close enough together that they fall into the same indirect block. Although I had anticipated a slowdown from contention for the single lock, my filesystem benchmarks show no measurable change in throughput on a uniprocessor system with three active snapshots. I conjecture that this result is because every copy-on-write fault must check all the active snapshots, so the process was inherently serial already. This change removes the last of the deadlocks of which I am aware in snapshots. Sponsored by: DARPA & NAI Labs.
2002-10-16 00:19:23 +00:00
fs = ip->i_fs;
lbn = fragstoblks(fs, dbtofsb(fs, bp->b_blkno));
Create struct snapdata which contains the snapshot fields from cdev and the previously malloc'ed snapshot lock. Malloc struct snapdata instead of just the lock. Replace snapshot fields in cdev with pointer to snapdata (saves 16 bytes). While here, give the private readblock() function a vnode argument in preparation for moving UFS to access GEOM directly.
2004-09-13 07:29:45 +00:00
snapblklist = sn->sn_blklist;
upper = sn->sn_listsize - 1;
Only the most recent snapshot contains the complete list of blocks that were copied in all of the earlier snapshots, thus its precomputed list must be used in the copyonwrite test. Using incomplete lists may lead to deadlock. Also do not include the blocks used for the indirect pointers in the indirect pointers as this may lead to inconsistent snapshots. Sponsored by: DARPA & NAI Labs. Approved by: re
2002-12-14 01:36:59 +00:00
lower = 1;
while (lower <= upper) {
mid = (lower + upper) / 2;
if (snapblklist[mid] == lbn)
break;
if (snapblklist[mid] < lbn)
lower = mid + 1;
else
upper = mid - 1;
}
if (lower <= upper) {
VI_UNLOCK(devvp);
return (0);
}
Un-staticize waitrunningbufspace() and call it before returning from ffs_copyonwrite() if any async writes were launched. Restore the threads previous TDP_NORUNNINGBUF state before returning from ffs_copyonwrite().
2005-09-30 18:07:41 +00:00
launched_async_io = 0;
prev_norunningbuf = td->td_pflags & TDP_NORUNNINGBUF;
Un-staticize runningbufwakeup() and staticize updateproc. Add a new private thread flag to indicate that the thread should not sleep if runningbufspace is too large. Set this flag on the bufdaemon and syncer threads so that they skip the waitrunningbufspace() call in bufwrite() rather than than checking the proc pointer vs. the known proc pointers for these two threads. A way of preventing these threads from being starved for I/O but still placing limits on their outstanding I/O would be desirable. Set this flag in ffs_copyonwrite() to prevent bufwrite() calls from blocking on the runningbufspace check while holding snaplk. This prevents snaplk from being held for an arbitrarily long period of time if runningbufspace is high and greatly reduces the contention for snaplk. The disadvantage is that ffs_copyonwrite() can start a large amount of I/O if there are a large number of snapshots, which could cause a deadlock in other parts of the code. Call runningbufwakeup() in ffs_copyonwrite() to decrement runningbufspace before attempting to grab snaplk so that I/O requests waiting on snaplk are not counted in runningbufspace as being in-progress. Increment runningbufspace again before actually launching the original I/O request. Prior to the above two changes, the system could deadlock if enough I/O requests were blocked by snaplk to prevent runningbufspace from falling below lorunningspace and one of the bawrite() calls in ffs_copyonwrite() blocked in waitrunningbufspace() while holding snaplk. See <http://www.holm.cc/stress/log/cons143.html>
2005-09-30 01:30:01 +00:00
/*
* Since I/O on bp isn't yet in progress and it may be blocked
* for a long time waiting on snaplk, back it out of
* runningbufspace, possibly waking other threads waiting for space.
*/
A side effect of calling runningbufwakeup() is that bp->b_runningbufspace is cleared. Save old value and restore bp->b_runningbufspace before returning from ffs_copyonwrite().
2006-05-03 00:04:38 +00:00
saved_runningbufspace = bp->b_runningbufspace;
if (saved_runningbufspace != 0)
runningbufwakeup(bp);
Only the most recent snapshot contains the complete list of blocks that were copied in all of the earlier snapshots, thus its precomputed list must be used in the copyonwrite test. Using incomplete lists may lead to deadlock. Also do not include the blocks used for the indirect pointers in the indirect pointers as this may lead to inconsistent snapshots. Sponsored by: DARPA & NAI Labs. Approved by: re
2002-12-14 01:36:59 +00:00
/*
* Not in the precomputed list, so check the snapshots.
*/
Cleanup lockmgr interface and exported KPI: - Remove the "thread" argument from the lockmgr() function as it is always curthread now - Axe lockcount() function as it is no longer used - Axe LOCKMGR_ASSERT() as it is bogus really and no currently used. Hopefully this will be soonly replaced by something suitable for it. - Remove the prototype for dumplockinfo() as the function is no longer present Addictionally: - Introduce a KASSERT() in lockstatus() in order to let it accept only curthread or NULL as they should only be passed - Do a little bit of style(9) cleanup on lockmgr.h KPI results heavilly broken by this change, so manpages and FreeBSD_version will be modified accordingly by further commits. Tested by: matteo
2008-01-24 12:34:30 +00:00
while (lockmgr(&sn->sn_lock, LK_INTERLOCK | LK_EXCLUSIVE | LK_SLEEPFAIL,
VI_MTX(devvp)) != 0) {
Reduce the probability of low block numbers passed to ffs_snapblkfree() by skipping the call from ffs_snapremove() if the block number is zero. Simplify snapshot locking in ffs_copyonwrite() and ffs_snapblkfree() by using the same locking protocol for low block numbers as for larger block numbers. This removes a lock leak that could happen if vn_lock() succeeded after lockmgr() failed in ffs_snapblkfree(). Check if snapshot is gone before retrying a lock in ffs_copyonwrite().
2005-10-09 19:45:01 +00:00
VI_LOCK(devvp);
sn = devvp->v_rdev->si_snapdata;
if (sn == NULL ||
Use *_EMPTY macros when appropriate.
2007-04-04 07:29:53 +00:00
TAILQ_EMPTY(&sn->sn_head)) {
Reduce the probability of low block numbers passed to ffs_snapblkfree() by skipping the call from ffs_snapremove() if the block number is zero. Simplify snapshot locking in ffs_copyonwrite() and ffs_snapblkfree() by using the same locking protocol for low block numbers as for larger block numbers. This removes a lock leak that could happen if vn_lock() succeeded after lockmgr() failed in ffs_snapblkfree(). Check if snapshot is gone before retrying a lock in ffs_copyonwrite().
2005-10-09 19:45:01 +00:00
VI_UNLOCK(devvp);
A side effect of calling runningbufwakeup() is that bp->b_runningbufspace is cleared. Save old value and restore bp->b_runningbufspace before returning from ffs_copyonwrite().
2006-05-03 00:04:38 +00:00
if (saved_runningbufspace != 0) {
bp->b_runningbufspace = saved_runningbufspace;
Adjust some variables (mostly related to the buffer cache) that hold address space sizes to be longs instead of ints. Specifically, the follow values are now longs: runningbufspace, bufspace, maxbufspace, bufmallocspace, maxbufmallocspace, lobufspace, hibufspace, lorunningspace, hirunningspace, maxswzone, maxbcache, and maxpipekva. Previously, a relatively small number (~ 44000) of buffers set in kern.nbuf would result in integer overflows resulting either in hangs or bogus values of hidirtybuffers and lodirtybuffers. Now one has to overflow a long to see such problems. There was a check for a nbuf setting that would cause overflows in the auto-tuning of nbuf. I've changed it to always check and cap nbuf but warn if a user-supplied tunable would cause overflow. Note that this changes the ABI of several sysctls that are used by things like top(1), etc., so any MFC would probably require a some gross shims to allow for that. MFC after: 1 month
2009-03-09 19:35:20 +00:00
atomic_add_long(&runningbufspace,
Reduce the probability of low block numbers passed to ffs_snapblkfree() by skipping the call from ffs_snapremove() if the block number is zero. Simplify snapshot locking in ffs_copyonwrite() and ffs_snapblkfree() by using the same locking protocol for low block numbers as for larger block numbers. This removes a lock leak that could happen if vn_lock() succeeded after lockmgr() failed in ffs_snapblkfree(). Check if snapshot is gone before retrying a lock in ffs_copyonwrite().
2005-10-09 19:45:01 +00:00
bp->b_runningbufspace);
A side effect of calling runningbufwakeup() is that bp->b_runningbufspace is cleared. Save old value and restore bp->b_runningbufspace before returning from ffs_copyonwrite().
2006-05-03 00:04:38 +00:00
}
Reduce the probability of low block numbers passed to ffs_snapblkfree() by skipping the call from ffs_snapremove() if the block number is zero. Simplify snapshot locking in ffs_copyonwrite() and ffs_snapblkfree() by using the same locking protocol for low block numbers as for larger block numbers. This removes a lock leak that could happen if vn_lock() succeeded after lockmgr() failed in ffs_snapblkfree(). Check if snapshot is gone before retrying a lock in ffs_copyonwrite().
2005-10-09 19:45:01 +00:00
return (0); /* Snapshot gone */
}
}
Create struct snapdata which contains the snapshot fields from cdev and the previously malloc'ed snapshot lock. Malloc struct snapdata instead of just the lock. Replace snapshot fields in cdev with pointer to snapdata (saves 16 bytes). While here, give the private readblock() function a vnode argument in preparation for moving UFS to access GEOM directly.
2004-09-13 07:29:45 +00:00
TAILQ_FOREACH(ip, &sn->sn_head, i_nextsnap) {
Add snapshots to the fast filesystem. Most of the changes support the gating of system calls that cause modifications to the underlying filesystem. The gating can be enabled by any filesystem that needs to consistently suspend operations by adding the vop_stdgetwritemount to their set of vnops. Once gating is enabled, the function vfs_write_suspend stops all new write operations to a filesystem, allows any filesystem modifying system calls already in progress to complete, then sync's the filesystem to disk and returns. The function vfs_write_resume allows the suspended write operations to begin again. Gating is not added by default for all filesystems as for SMP systems it adds two extra locks to such critical kernel paths as the write system call. Thus, gating should only be added as needed. Details on the use and current status of snapshots in FFS can be found in /sys/ufs/ffs/README.snapshot so for brevity and timelyness is not included here. Unless and until you create a snapshot file, these changes should have no effect on your system (famous last words).
2000-07-11 22:07:57 +00:00
vp = ITOV(ip);
- Call softdep_prealloc() before any of the balloc routines in the snapshot code. - Don't fsync() vnodes in prealloc if copy on write is in progress. It is not safe to recurse back into the write path here. Reported by: Vladimir Grebenschikov <vova@fbsd.ru>
2010-05-07 08:45:21 +00:00
if (DOINGSOFTDEP(vp))
softdep_prealloc(vp, MNT_WAIT);
Add snapshots to the fast filesystem. Most of the changes support the gating of system calls that cause modifications to the underlying filesystem. The gating can be enabled by any filesystem that needs to consistently suspend operations by adding the vop_stdgetwritemount to their set of vnops. Once gating is enabled, the function vfs_write_suspend stops all new write operations to a filesystem, allows any filesystem modifying system calls already in progress to complete, then sync's the filesystem to disk and returns. The function vfs_write_resume allows the suspended write operations to begin again. Gating is not added by default for all filesystems as for SMP systems it adds two extra locks to such critical kernel paths as the write system call. Thus, gating should only be added as needed. Details on the use and current status of snapshots in FFS can be found in /sys/ufs/ffs/README.snapshot so for brevity and timelyness is not included here. Unless and until you create a snapshot file, these changes should have no effect on your system (famous last words).
2000-07-11 22:07:57 +00:00
/*
* We ensure that everything of our own that needs to be
* copied will be done at the time that ffs_snapshot is
* called. Thus we can skip the check here which can
VOP_BALLOC was never really a VOP in the first place, so convert it to UFS_BALLOC like the other "between UFS and FFS function interfaces".
2001-04-29 12:36:52 +00:00
* deadlock in doing the lookup in UFS_BALLOC.
Add snapshots to the fast filesystem. Most of the changes support the gating of system calls that cause modifications to the underlying filesystem. The gating can be enabled by any filesystem that needs to consistently suspend operations by adding the vop_stdgetwritemount to their set of vnops. Once gating is enabled, the function vfs_write_suspend stops all new write operations to a filesystem, allows any filesystem modifying system calls already in progress to complete, then sync's the filesystem to disk and returns. The function vfs_write_resume allows the suspended write operations to begin again. Gating is not added by default for all filesystems as for SMP systems it adds two extra locks to such critical kernel paths as the write system call. Thus, gating should only be added as needed. Details on the use and current status of snapshots in FFS can be found in /sys/ufs/ffs/README.snapshot so for brevity and timelyness is not included here. Unless and until you create a snapshot file, these changes should have no effect on your system (famous last words).
2000-07-11 22:07:57 +00:00
*/
if (bp->b_vp == vp)
continue;
/*
This update further fine tunes the locking of snapshot vnodes in the ffs_copyonwrite routine to avoid a deadlock between the syncer daemon trying to sync out a snapshot vnode and the bufdaemon trying to write out a buffer containing the snapshot inode. With any luck this will be the last snapshot race condition. Sponsored by: DARPA & NAI Labs.
2002-10-22 01:23:00 +00:00
* Check to see if block needs to be copied. We do not have
* to hold the snapshot lock while doing this lookup as it
* will never require any additional allocations for the
* snapshot inode.
Add snapshots to the fast filesystem. Most of the changes support the gating of system calls that cause modifications to the underlying filesystem. The gating can be enabled by any filesystem that needs to consistently suspend operations by adding the vop_stdgetwritemount to their set of vnops. Once gating is enabled, the function vfs_write_suspend stops all new write operations to a filesystem, allows any filesystem modifying system calls already in progress to complete, then sync's the filesystem to disk and returns. The function vfs_write_resume allows the suspended write operations to begin again. Gating is not added by default for all filesystems as for SMP systems it adds two extra locks to such critical kernel paths as the write system call. Thus, gating should only be added as needed. Details on the use and current status of snapshots in FFS can be found in /sys/ufs/ffs/README.snapshot so for brevity and timelyness is not included here. Unless and until you create a snapshot file, these changes should have no effect on your system (famous last words).
2000-07-11 22:07:57 +00:00
*/
if (lbn < NDADDR) {
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
blkno = DIP(ip, i_db[lbn]);
Add snapshots to the fast filesystem. Most of the changes support the gating of system calls that cause modifications to the underlying filesystem. The gating can be enabled by any filesystem that needs to consistently suspend operations by adding the vop_stdgetwritemount to their set of vnops. Once gating is enabled, the function vfs_write_suspend stops all new write operations to a filesystem, allows any filesystem modifying system calls already in progress to complete, then sync's the filesystem to disk and returns. The function vfs_write_resume allows the suspended write operations to begin again. Gating is not added by default for all filesystems as for SMP systems it adds two extra locks to such critical kernel paths as the write system call. Thus, gating should only be added as needed. Details on the use and current status of snapshots in FFS can be found in /sys/ufs/ffs/README.snapshot so for brevity and timelyness is not included here. Unless and until you create a snapshot file, these changes should have no effect on your system (famous last words).
2000-07-11 22:07:57 +00:00
} else {
Un-staticize runningbufwakeup() and staticize updateproc. Add a new private thread flag to indicate that the thread should not sleep if runningbufspace is too large. Set this flag on the bufdaemon and syncer threads so that they skip the waitrunningbufspace() call in bufwrite() rather than than checking the proc pointer vs. the known proc pointers for these two threads. A way of preventing these threads from being starved for I/O but still placing limits on their outstanding I/O would be desirable. Set this flag in ffs_copyonwrite() to prevent bufwrite() calls from blocking on the runningbufspace check while holding snaplk. This prevents snaplk from being held for an arbitrarily long period of time if runningbufspace is high and greatly reduces the contention for snaplk. The disadvantage is that ffs_copyonwrite() can start a large amount of I/O if there are a large number of snapshots, which could cause a deadlock in other parts of the code. Call runningbufwakeup() in ffs_copyonwrite() to decrement runningbufspace before attempting to grab snaplk so that I/O requests waiting on snaplk are not counted in runningbufspace as being in-progress. Increment runningbufspace again before actually launching the original I/O request. Prior to the above two changes, the system could deadlock if enough I/O requests were blocked by snaplk to prevent runningbufspace from falling below lorunningspace and one of the bawrite() calls in ffs_copyonwrite() blocked in waitrunningbufspace() while holding snaplk. See <http://www.holm.cc/stress/log/cons143.html>
2005-09-30 01:30:01 +00:00
td->td_pflags |= TDP_COWINPROGRESS | TDP_NORUNNINGBUF;
VOP_BALLOC was never really a VOP in the first place, so convert it to UFS_BALLOC like the other "between UFS and FFS function interfaces".
2001-04-29 12:36:52 +00:00
error = UFS_BALLOC(vp, lblktosize(fs, (off_t)lbn),
Change locking so that all snapshots on a particular filesystem share a common lock. This change avoids a deadlock between snapshots when separate requests cause them to deadlock checking each other for a need to copy blocks that are close enough together that they fall into the same indirect block. Although I had anticipated a slowdown from contention for the single lock, my filesystem benchmarks show no measurable change in throughput on a uniprocessor system with three active snapshots. I conjecture that this result is because every copy-on-write fault must check all the active snapshots, so the process was inherently serial already. This change removes the last of the deadlocks of which I am aware in snapshots. Sponsored by: DARPA & NAI Labs.
2002-10-16 00:19:23 +00:00
fs->fs_bsize, KERNCRED, BA_METAONLY, &ibp);
Move the P_COWINPROGRESS flag from being a per-process p_flag to being a per-thread td_pflag which doesn't require any locks to read or write as it is only read or written by curthread on itself. Glanced at by: mckusick
2003-10-23 21:14:08 +00:00
td->td_pflags &= ~TDP_COWINPROGRESS;
Change locking so that all snapshots on a particular filesystem share a common lock. This change avoids a deadlock between snapshots when separate requests cause them to deadlock checking each other for a need to copy blocks that are close enough together that they fall into the same indirect block. Although I had anticipated a slowdown from contention for the single lock, my filesystem benchmarks show no measurable change in throughput on a uniprocessor system with three active snapshots. I conjecture that this result is because every copy-on-write fault must check all the active snapshots, so the process was inherently serial already. This change removes the last of the deadlocks of which I am aware in snapshots. Sponsored by: DARPA & NAI Labs.
2002-10-16 00:19:23 +00:00
if (error)
break;
Add snapshots to the fast filesystem. Most of the changes support the gating of system calls that cause modifications to the underlying filesystem. The gating can be enabled by any filesystem that needs to consistently suspend operations by adding the vop_stdgetwritemount to their set of vnops. Once gating is enabled, the function vfs_write_suspend stops all new write operations to a filesystem, allows any filesystem modifying system calls already in progress to complete, then sync's the filesystem to disk and returns. The function vfs_write_resume allows the suspended write operations to begin again. Gating is not added by default for all filesystems as for SMP systems it adds two extra locks to such critical kernel paths as the write system call. Thus, gating should only be added as needed. Details on the use and current status of snapshots in FFS can be found in /sys/ufs/ffs/README.snapshot so for brevity and timelyness is not included here. Unless and until you create a snapshot file, these changes should have no effect on your system (famous last words).
2000-07-11 22:07:57 +00:00
indiroff = (lbn - NDADDR) % NINDIR(fs);
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
if (ip->i_ump->um_fstype == UFS1)
blkno=((ufs1_daddr_t *)(ibp->b_data))[indiroff];
else
blkno=((ufs2_daddr_t *)(ibp->b_data))[indiroff];
This patch corrects the first round of panics and hangs reported with the new snapshot code. Update addaliasu to correctly implement the semantics of the old checkalias function. When a device vnode first comes into existence, check to see if an anonymous vnode for the same device was created at boot time by bdevvp(). If so, adopt the bdevvp vnode rather than creating a new vnode for the device. This corrects a problem which caused the kernel to panic when taking a snapshot of the root filesystem. Change the calling convention of vn_write_suspend_wait() to be the same as vn_start_write(). Split out softdep_flushworklist() from softdep_flushfiles() so that it can be used to clear the work queue when suspending filesystem operations. Access to buffers becomes recursive so that snapshots can recursively traverse their indirect blocks using ffs_copyonwrite() when checking for the need for copy on write when flushing one of their own indirect blocks. This eliminates a deadlock between the syncer daemon and a process taking a snapshot. Ensure that softdep_process_worklist() can never block because of a snapshot being taken. This eliminates a problem with buffer starvation. Cleanup change in ffs_sync() which did not synchronously wait when MNT_WAIT was specified. The result was an unclean filesystem panic when doing forcible unmount with heavy filesystem I/O in progress. Return a zero'ed block when reading a block that was not in use at the time that a snapshot was taken. Normally, these blocks should never be read. However, the readahead code will occationally read them which can cause unexpected behavior. Clean up the debugging code that ensures that no blocks be written on a filesystem while it is suspended. Snapshots must explicitly label the blocks that they are writing during the suspension so that they do not cause a `write on suspended filesystem' panic. Reorganize ffs_copyonwrite() to eliminate a deadlock and also to prevent a race condition that would permit the same block to be copied twice. This change eliminates an unexpected soft updates inconsistency in fsck caused by the double allocation. Use bqrelse rather than brelse for buffers that will be needed soon again by the snapshot code. This improves snapshot performance.
2000-07-24 05:28:33 +00:00
bqrelse(ibp);
Add snapshots to the fast filesystem. Most of the changes support the gating of system calls that cause modifications to the underlying filesystem. The gating can be enabled by any filesystem that needs to consistently suspend operations by adding the vop_stdgetwritemount to their set of vnops. Once gating is enabled, the function vfs_write_suspend stops all new write operations to a filesystem, allows any filesystem modifying system calls already in progress to complete, then sync's the filesystem to disk and returns. The function vfs_write_resume allows the suspended write operations to begin again. Gating is not added by default for all filesystems as for SMP systems it adds two extra locks to such critical kernel paths as the write system call. Thus, gating should only be added as needed. Details on the use and current status of snapshots in FFS can be found in /sys/ufs/ffs/README.snapshot so for brevity and timelyness is not included here. Unless and until you create a snapshot file, these changes should have no effect on your system (famous last words).
2000-07-11 22:07:57 +00:00
}
Turn most ffs 'DIAGNOSTIC's into INVARIANTS.
2007-11-08 17:21:51 +00:00
#ifdef INVARIANTS
Add snapshots to the fast filesystem. Most of the changes support the gating of system calls that cause modifications to the underlying filesystem. The gating can be enabled by any filesystem that needs to consistently suspend operations by adding the vop_stdgetwritemount to their set of vnops. Once gating is enabled, the function vfs_write_suspend stops all new write operations to a filesystem, allows any filesystem modifying system calls already in progress to complete, then sync's the filesystem to disk and returns. The function vfs_write_resume allows the suspended write operations to begin again. Gating is not added by default for all filesystems as for SMP systems it adds two extra locks to such critical kernel paths as the write system call. Thus, gating should only be added as needed. Details on the use and current status of snapshots in FFS can be found in /sys/ufs/ffs/README.snapshot so for brevity and timelyness is not included here. Unless and until you create a snapshot file, these changes should have no effect on your system (famous last words).
2000-07-11 22:07:57 +00:00
if (blkno == BLK_SNAP && bp->b_lblkno >= 0)
panic("ffs_copyonwrite: bad copy block");
#endif
Change locking so that all snapshots on a particular filesystem share a common lock. This change avoids a deadlock between snapshots when separate requests cause them to deadlock checking each other for a need to copy blocks that are close enough together that they fall into the same indirect block. Although I had anticipated a slowdown from contention for the single lock, my filesystem benchmarks show no measurable change in throughput on a uniprocessor system with three active snapshots. I conjecture that this result is because every copy-on-write fault must check all the active snapshots, so the process was inherently serial already. This change removes the last of the deadlocks of which I am aware in snapshots. Sponsored by: DARPA & NAI Labs.
2002-10-16 00:19:23 +00:00
if (blkno != 0)
Add snapshots to the fast filesystem. Most of the changes support the gating of system calls that cause modifications to the underlying filesystem. The gating can be enabled by any filesystem that needs to consistently suspend operations by adding the vop_stdgetwritemount to their set of vnops. Once gating is enabled, the function vfs_write_suspend stops all new write operations to a filesystem, allows any filesystem modifying system calls already in progress to complete, then sync's the filesystem to disk and returns. The function vfs_write_resume allows the suspended write operations to begin again. Gating is not added by default for all filesystems as for SMP systems it adds two extra locks to such critical kernel paths as the write system call. Thus, gating should only be added as needed. Details on the use and current status of snapshots in FFS can be found in /sys/ufs/ffs/README.snapshot so for brevity and timelyness is not included here. Unless and until you create a snapshot file, these changes should have no effect on your system (famous last words).
2000-07-11 22:07:57 +00:00
continue;
/*
This update further fine tunes the locking of snapshot vnodes in the ffs_copyonwrite routine to avoid a deadlock between the syncer daemon trying to sync out a snapshot vnode and the bufdaemon trying to write out a buffer containing the snapshot inode. With any luck this will be the last snapshot race condition. Sponsored by: DARPA & NAI Labs.
2002-10-22 01:23:00 +00:00
* Allocate the block into which to do the copy. Since
* multiple processes may all try to copy the same block,
* we have to recheck our need to do a copy if we sleep
* waiting for the lock.
*
* Because all snapshots on a filesystem share a single
* lock, we ensure that we will never be in competition
* with another process to allocate a block.
Add snapshots to the fast filesystem. Most of the changes support the gating of system calls that cause modifications to the underlying filesystem. The gating can be enabled by any filesystem that needs to consistently suspend operations by adding the vop_stdgetwritemount to their set of vnops. Once gating is enabled, the function vfs_write_suspend stops all new write operations to a filesystem, allows any filesystem modifying system calls already in progress to complete, then sync's the filesystem to disk and returns. The function vfs_write_resume allows the suspended write operations to begin again. Gating is not added by default for all filesystems as for SMP systems it adds two extra locks to such critical kernel paths as the write system call. Thus, gating should only be added as needed. Details on the use and current status of snapshots in FFS can be found in /sys/ufs/ffs/README.snapshot so for brevity and timelyness is not included here. Unless and until you create a snapshot file, these changes should have no effect on your system (famous last words).
2000-07-11 22:07:57 +00:00
*/
Un-staticize runningbufwakeup() and staticize updateproc. Add a new private thread flag to indicate that the thread should not sleep if runningbufspace is too large. Set this flag on the bufdaemon and syncer threads so that they skip the waitrunningbufspace() call in bufwrite() rather than than checking the proc pointer vs. the known proc pointers for these two threads. A way of preventing these threads from being starved for I/O but still placing limits on their outstanding I/O would be desirable. Set this flag in ffs_copyonwrite() to prevent bufwrite() calls from blocking on the runningbufspace check while holding snaplk. This prevents snaplk from being held for an arbitrarily long period of time if runningbufspace is high and greatly reduces the contention for snaplk. The disadvantage is that ffs_copyonwrite() can start a large amount of I/O if there are a large number of snapshots, which could cause a deadlock in other parts of the code. Call runningbufwakeup() in ffs_copyonwrite() to decrement runningbufspace before attempting to grab snaplk so that I/O requests waiting on snaplk are not counted in runningbufspace as being in-progress. Increment runningbufspace again before actually launching the original I/O request. Prior to the above two changes, the system could deadlock if enough I/O requests were blocked by snaplk to prevent runningbufspace from falling below lorunningspace and one of the bawrite() calls in ffs_copyonwrite() blocked in waitrunningbufspace() while holding snaplk. See <http://www.holm.cc/stress/log/cons143.html>
2005-09-30 01:30:01 +00:00
td->td_pflags |= TDP_COWINPROGRESS | TDP_NORUNNINGBUF;
VOP_BALLOC was never really a VOP in the first place, so convert it to UFS_BALLOC like the other "between UFS and FFS function interfaces".
2001-04-29 12:36:52 +00:00
error = UFS_BALLOC(vp, lblktosize(fs, (off_t)lbn),
Change locking so that all snapshots on a particular filesystem share a common lock. This change avoids a deadlock between snapshots when separate requests cause them to deadlock checking each other for a need to copy blocks that are close enough together that they fall into the same indirect block. Although I had anticipated a slowdown from contention for the single lock, my filesystem benchmarks show no measurable change in throughput on a uniprocessor system with three active snapshots. I conjecture that this result is because every copy-on-write fault must check all the active snapshots, so the process was inherently serial already. This change removes the last of the deadlocks of which I am aware in snapshots. Sponsored by: DARPA & NAI Labs.
2002-10-16 00:19:23 +00:00
fs->fs_bsize, KERNCRED, 0, &cbp);
Move the P_COWINPROGRESS flag from being a per-process p_flag to being a per-thread td_pflag which doesn't require any locks to read or write as it is only read or written by curthread on itself. Glanced at by: mckusick
2003-10-23 21:14:08 +00:00
td->td_pflags &= ~TDP_COWINPROGRESS;
Change locking so that all snapshots on a particular filesystem share a common lock. This change avoids a deadlock between snapshots when separate requests cause them to deadlock checking each other for a need to copy blocks that are close enough together that they fall into the same indirect block. Although I had anticipated a slowdown from contention for the single lock, my filesystem benchmarks show no measurable change in throughput on a uniprocessor system with three active snapshots. I conjecture that this result is because every copy-on-write fault must check all the active snapshots, so the process was inherently serial already. This change removes the last of the deadlocks of which I am aware in snapshots. Sponsored by: DARPA & NAI Labs.
2002-10-16 00:19:23 +00:00
if (error)
break;
Add snapshots to the fast filesystem. Most of the changes support the gating of system calls that cause modifications to the underlying filesystem. The gating can be enabled by any filesystem that needs to consistently suspend operations by adding the vop_stdgetwritemount to their set of vnops. Once gating is enabled, the function vfs_write_suspend stops all new write operations to a filesystem, allows any filesystem modifying system calls already in progress to complete, then sync's the filesystem to disk and returns. The function vfs_write_resume allows the suspended write operations to begin again. Gating is not added by default for all filesystems as for SMP systems it adds two extra locks to such critical kernel paths as the write system call. Thus, gating should only be added as needed. Details on the use and current status of snapshots in FFS can be found in /sys/ufs/ffs/README.snapshot so for brevity and timelyness is not included here. Unless and until you create a snapshot file, these changes should have no effect on your system (famous last words).
2000-07-11 22:07:57 +00:00
#ifdef DEBUG
if (snapdebug) {
Fix up kernel sources to be ready for a 64-bit ino_t. Original code by: Gleb Kurtsou
2012-09-27 23:30:49 +00:00
printf("Copyonwrite: snapino %ju lbn %jd for ",
(uintmax_t)ip->i_number, (intmax_t)lbn);
Fixes to track snapshot copy-on-write checking in the specinfo structure rather than assuming that the device vnode would reside in the FFS filesystem (which is obviously a broken assumption with the device filesystem).
2001-03-07 07:09:55 +00:00
if (bp->b_vp == devvp)
Add snapshots to the fast filesystem. Most of the changes support the gating of system calls that cause modifications to the underlying filesystem. The gating can be enabled by any filesystem that needs to consistently suspend operations by adding the vop_stdgetwritemount to their set of vnops. Once gating is enabled, the function vfs_write_suspend stops all new write operations to a filesystem, allows any filesystem modifying system calls already in progress to complete, then sync's the filesystem to disk and returns. The function vfs_write_resume allows the suspended write operations to begin again. Gating is not added by default for all filesystems as for SMP systems it adds two extra locks to such critical kernel paths as the write system call. Thus, gating should only be added as needed. Details on the use and current status of snapshots in FFS can be found in /sys/ufs/ffs/README.snapshot so for brevity and timelyness is not included here. Unless and until you create a snapshot file, these changes should have no effect on your system (famous last words).
2000-07-11 22:07:57 +00:00
printf("fs metadata");
else
Fix up kernel sources to be ready for a 64-bit ino_t. Original code by: Gleb Kurtsou
2012-09-27 23:30:49 +00:00
printf("inum %ju",
(uintmax_t)VTOI(bp->b_vp)->i_number);
Warning fixes for 64 bits platforms. This eliminates all the warnings I have had in the FFS code on sparc64. Reviewed by: mckusick
2002-06-23 18:17:27 +00:00
printf(" lblkno %jd to blkno %jd\n",
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
(intmax_t)bp->b_lblkno, (intmax_t)cbp->b_blkno);
Add snapshots to the fast filesystem. Most of the changes support the gating of system calls that cause modifications to the underlying filesystem. The gating can be enabled by any filesystem that needs to consistently suspend operations by adding the vop_stdgetwritemount to their set of vnops. Once gating is enabled, the function vfs_write_suspend stops all new write operations to a filesystem, allows any filesystem modifying system calls already in progress to complete, then sync's the filesystem to disk and returns. The function vfs_write_resume allows the suspended write operations to begin again. Gating is not added by default for all filesystems as for SMP systems it adds two extra locks to such critical kernel paths as the write system call. Thus, gating should only be added as needed. Details on the use and current status of snapshots in FFS can be found in /sys/ufs/ffs/README.snapshot so for brevity and timelyness is not included here. Unless and until you create a snapshot file, these changes should have no effect on your system (famous last words).
2000-07-11 22:07:57 +00:00
}
#endif
/*
* If we have already read the old block contents, then
When closing the last reference to an unlinked file, it is freed by the inactive routine. Because the freeing causes the filesystem to be modified, the close must be held up during periods when the filesystem is suspended. For snapshots to be consistent across crashes, they must write blocks that they copy and claim those written blocks in their on-disk block pointers before the old blocks that they referenced can be allowed to be written. Close a loophole that allowed unwritten blocks to be skipped when doing ffs_sync with a request to wait for all I/O activity to be completed.
2001-04-25 08:11:18 +00:00
* simply copy them to the new block. Note that we need
* to synchronously write snapshots that have not been
* unlinked, and hence will be visible after a crash,
Ensure that filesystem metadata contained within persistent snapshots is always kept consistent. Suggested by: Jeff Roberson
2011-06-15 23:19:09 +00:00
* to ensure their integrity. At a minimum we ensure the
* integrity of the filesystem metadata, but use the
* dopersistence sysctl-setable flag to decide on the
* persistence needed for file content data.
Add snapshots to the fast filesystem. Most of the changes support the gating of system calls that cause modifications to the underlying filesystem. The gating can be enabled by any filesystem that needs to consistently suspend operations by adding the vop_stdgetwritemount to their set of vnops. Once gating is enabled, the function vfs_write_suspend stops all new write operations to a filesystem, allows any filesystem modifying system calls already in progress to complete, then sync's the filesystem to disk and returns. The function vfs_write_resume allows the suspended write operations to begin again. Gating is not added by default for all filesystems as for SMP systems it adds two extra locks to such critical kernel paths as the write system call. Thus, gating should only be added as needed. Details on the use and current status of snapshots in FFS can be found in /sys/ufs/ffs/README.snapshot so for brevity and timelyness is not included here. Unless and until you create a snapshot file, these changes should have no effect on your system (famous last words).
2000-07-11 22:07:57 +00:00
*/
if (savedcbp != 0) {
bcopy(savedcbp->b_data, cbp->b_data, fs->fs_bsize);
bawrite(cbp);
Ensure that filesystem metadata contained within persistent snapshots is always kept consistent. Suggested by: Jeff Roberson
2011-06-15 23:19:09 +00:00
if ((devvp == bp->b_vp || bp->b_vp->v_type == VDIR ||
dopersistence) && ip->i_effnlink > 0)
Add a third flags argument to ffs_syncvnode to avoid a possible conflict with MNT_WAIT flags that passed in its second argument. This will be MFC'ed together with r232351. Discussed with: kib
2012-03-25 00:02:37 +00:00
(void) ffs_syncvnode(vp, MNT_WAIT, NO_INO_UPDT);
Un-staticize waitrunningbufspace() and call it before returning from ffs_copyonwrite() if any async writes were launched. Restore the threads previous TDP_NORUNNINGBUF state before returning from ffs_copyonwrite().
2005-09-30 18:07:41 +00:00
else
launched_async_io = 1;
Add snapshots to the fast filesystem. Most of the changes support the gating of system calls that cause modifications to the underlying filesystem. The gating can be enabled by any filesystem that needs to consistently suspend operations by adding the vop_stdgetwritemount to their set of vnops. Once gating is enabled, the function vfs_write_suspend stops all new write operations to a filesystem, allows any filesystem modifying system calls already in progress to complete, then sync's the filesystem to disk and returns. The function vfs_write_resume allows the suspended write operations to begin again. Gating is not added by default for all filesystems as for SMP systems it adds two extra locks to such critical kernel paths as the write system call. Thus, gating should only be added as needed. Details on the use and current status of snapshots in FFS can be found in /sys/ufs/ffs/README.snapshot so for brevity and timelyness is not included here. Unless and until you create a snapshot file, these changes should have no effect on your system (famous last words).
2000-07-11 22:07:57 +00:00
continue;
}
/*
* Otherwise, read the old block contents into the buffer.
*/
Create struct snapdata which contains the snapshot fields from cdev and the previously malloc'ed snapshot lock. Malloc struct snapdata instead of just the lock. Replace snapshot fields in cdev with pointer to snapdata (saves 16 bytes). While here, give the private readblock() function a vnode argument in preparation for moving UFS to access GEOM directly.
2004-09-13 07:29:45 +00:00
if ((error = readblock(vp, cbp, lbn)) != 0) {
When closing the last reference to an unlinked file, it is freed by the inactive routine. Because the freeing causes the filesystem to be modified, the close must be held up during periods when the filesystem is suspended. For snapshots to be consistent across crashes, they must write blocks that they copy and claim those written blocks in their on-disk block pointers before the old blocks that they referenced can be allowed to be written. Close a loophole that allowed unwritten blocks to be skipped when doing ffs_sync with a request to wait for all I/O activity to be completed.
2001-04-25 08:11:18 +00:00
bzero(cbp->b_data, fs->fs_bsize);
bawrite(cbp);
Ensure that filesystem metadata contained within persistent snapshots is always kept consistent. Suggested by: Jeff Roberson
2011-06-15 23:19:09 +00:00
if ((devvp == bp->b_vp || bp->b_vp->v_type == VDIR ||
dopersistence) && ip->i_effnlink > 0)
Add a third flags argument to ffs_syncvnode to avoid a possible conflict with MNT_WAIT flags that passed in its second argument. This will be MFC'ed together with r232351. Discussed with: kib
2012-03-25 00:02:37 +00:00
(void) ffs_syncvnode(vp, MNT_WAIT, NO_INO_UPDT);
Un-staticize waitrunningbufspace() and call it before returning from ffs_copyonwrite() if any async writes were launched. Restore the threads previous TDP_NORUNNINGBUF state before returning from ffs_copyonwrite().
2005-09-30 18:07:41 +00:00
else
launched_async_io = 1;
Add snapshots to the fast filesystem. Most of the changes support the gating of system calls that cause modifications to the underlying filesystem. The gating can be enabled by any filesystem that needs to consistently suspend operations by adding the vop_stdgetwritemount to their set of vnops. Once gating is enabled, the function vfs_write_suspend stops all new write operations to a filesystem, allows any filesystem modifying system calls already in progress to complete, then sync's the filesystem to disk and returns. The function vfs_write_resume allows the suspended write operations to begin again. Gating is not added by default for all filesystems as for SMP systems it adds two extra locks to such critical kernel paths as the write system call. Thus, gating should only be added as needed. Details on the use and current status of snapshots in FFS can be found in /sys/ufs/ffs/README.snapshot so for brevity and timelyness is not included here. Unless and until you create a snapshot file, these changes should have no effect on your system (famous last words).
2000-07-11 22:07:57 +00:00
break;
When closing the last reference to an unlinked file, it is freed by the inactive routine. Because the freeing causes the filesystem to be modified, the close must be held up during periods when the filesystem is suspended. For snapshots to be consistent across crashes, they must write blocks that they copy and claim those written blocks in their on-disk block pointers before the old blocks that they referenced can be allowed to be written. Close a loophole that allowed unwritten blocks to be skipped when doing ffs_sync with a request to wait for all I/O activity to be completed.
2001-04-25 08:11:18 +00:00
}
Add snapshots to the fast filesystem. Most of the changes support the gating of system calls that cause modifications to the underlying filesystem. The gating can be enabled by any filesystem that needs to consistently suspend operations by adding the vop_stdgetwritemount to their set of vnops. Once gating is enabled, the function vfs_write_suspend stops all new write operations to a filesystem, allows any filesystem modifying system calls already in progress to complete, then sync's the filesystem to disk and returns. The function vfs_write_resume allows the suspended write operations to begin again. Gating is not added by default for all filesystems as for SMP systems it adds two extra locks to such critical kernel paths as the write system call. Thus, gating should only be added as needed. Details on the use and current status of snapshots in FFS can be found in /sys/ufs/ffs/README.snapshot so for brevity and timelyness is not included here. Unless and until you create a snapshot file, these changes should have no effect on your system (famous last words).
2000-07-11 22:07:57 +00:00
savedcbp = cbp;
}
When closing the last reference to an unlinked file, it is freed by the inactive routine. Because the freeing causes the filesystem to be modified, the close must be held up during periods when the filesystem is suspended. For snapshots to be consistent across crashes, they must write blocks that they copy and claim those written blocks in their on-disk block pointers before the old blocks that they referenced can be allowed to be written. Close a loophole that allowed unwritten blocks to be skipped when doing ffs_sync with a request to wait for all I/O activity to be completed.
2001-04-25 08:11:18 +00:00
/*
* Note that we need to synchronously write snapshots that
* have not been unlinked, and hence will be visible after
Ensure that filesystem metadata contained within persistent snapshots is always kept consistent. Suggested by: Jeff Roberson
2011-06-15 23:19:09 +00:00
* a crash, to ensure their integrity. At a minimum we
* ensure the integrity of the filesystem metadata, but
* use the dopersistence sysctl-setable flag to decide on
* the persistence needed for file content data.
When closing the last reference to an unlinked file, it is freed by the inactive routine. Because the freeing causes the filesystem to be modified, the close must be held up during periods when the filesystem is suspended. For snapshots to be consistent across crashes, they must write blocks that they copy and claim those written blocks in their on-disk block pointers before the old blocks that they referenced can be allowed to be written. Close a loophole that allowed unwritten blocks to be skipped when doing ffs_sync with a request to wait for all I/O activity to be completed.
2001-04-25 08:11:18 +00:00
*/
if (savedcbp) {
vp = savedcbp->b_vp;
Add snapshots to the fast filesystem. Most of the changes support the gating of system calls that cause modifications to the underlying filesystem. The gating can be enabled by any filesystem that needs to consistently suspend operations by adding the vop_stdgetwritemount to their set of vnops. Once gating is enabled, the function vfs_write_suspend stops all new write operations to a filesystem, allows any filesystem modifying system calls already in progress to complete, then sync's the filesystem to disk and returns. The function vfs_write_resume allows the suspended write operations to begin again. Gating is not added by default for all filesystems as for SMP systems it adds two extra locks to such critical kernel paths as the write system call. Thus, gating should only be added as needed. Details on the use and current status of snapshots in FFS can be found in /sys/ufs/ffs/README.snapshot so for brevity and timelyness is not included here. Unless and until you create a snapshot file, these changes should have no effect on your system (famous last words).
2000-07-11 22:07:57 +00:00
bawrite(savedcbp);
Ensure that filesystem metadata contained within persistent snapshots is always kept consistent. Suggested by: Jeff Roberson
2011-06-15 23:19:09 +00:00
if ((devvp == bp->b_vp || bp->b_vp->v_type == VDIR ||
dopersistence) && VTOI(vp)->i_effnlink > 0)
Add a third flags argument to ffs_syncvnode to avoid a possible conflict with MNT_WAIT flags that passed in its second argument. This will be MFC'ed together with r232351. Discussed with: kib
2012-03-25 00:02:37 +00:00
(void) ffs_syncvnode(vp, MNT_WAIT, NO_INO_UPDT);
Un-staticize waitrunningbufspace() and call it before returning from ffs_copyonwrite() if any async writes were launched. Restore the threads previous TDP_NORUNNINGBUF state before returning from ffs_copyonwrite().
2005-09-30 18:07:41 +00:00
else
launched_async_io = 1;
When closing the last reference to an unlinked file, it is freed by the inactive routine. Because the freeing causes the filesystem to be modified, the close must be held up during periods when the filesystem is suspended. For snapshots to be consistent across crashes, they must write blocks that they copy and claim those written blocks in their on-disk block pointers before the old blocks that they referenced can be allowed to be written. Close a loophole that allowed unwritten blocks to be skipped when doing ffs_sync with a request to wait for all I/O activity to be completed.
2001-04-25 08:11:18 +00:00
}
Cleanup lockmgr interface and exported KPI: - Remove the "thread" argument from the lockmgr() function as it is always curthread now - Axe lockcount() function as it is no longer used - Axe LOCKMGR_ASSERT() as it is bogus really and no currently used. Hopefully this will be soonly replaced by something suitable for it. - Remove the prototype for dumplockinfo() as the function is no longer present Addictionally: - Introduce a KASSERT() in lockstatus() in order to let it accept only curthread or NULL as they should only be passed - Do a little bit of style(9) cleanup on lockmgr.h KPI results heavilly broken by this change, so manpages and FreeBSD_version will be modified accordingly by further commits. Tested by: matteo
2008-01-24 12:34:30 +00:00
lockmgr(vp->v_vnlock, LK_RELEASE, NULL);
Reduce the probability of low block numbers passed to ffs_snapblkfree() by skipping the call from ffs_snapremove() if the block number is zero. Simplify snapshot locking in ffs_copyonwrite() and ffs_snapblkfree() by using the same locking protocol for low block numbers as for larger block numbers. This removes a lock leak that could happen if vn_lock() succeeded after lockmgr() failed in ffs_snapblkfree(). Check if snapshot is gone before retrying a lock in ffs_copyonwrite().
2005-10-09 19:45:01 +00:00
td->td_pflags = (td->td_pflags & ~TDP_NORUNNINGBUF) |
prev_norunningbuf;
Correct previous commit to fix the sense of the TDP_NORUNNINGBUF check in ffs_copyonwrite() that is a precondition for calling waitrunningbufspace(). Pointed out by: tegge Pointy hat to: truckman MFC after: 3 days
2005-10-01 19:10:48 +00:00
if (launched_async_io && (td->td_pflags & TDP_NORUNNINGBUF) == 0)
Un-staticize waitrunningbufspace() and call it before returning from ffs_copyonwrite() if any async writes were launched. Restore the threads previous TDP_NORUNNINGBUF state before returning from ffs_copyonwrite().
2005-09-30 18:07:41 +00:00
waitrunningbufspace();
Un-staticize runningbufwakeup() and staticize updateproc. Add a new private thread flag to indicate that the thread should not sleep if runningbufspace is too large. Set this flag on the bufdaemon and syncer threads so that they skip the waitrunningbufspace() call in bufwrite() rather than than checking the proc pointer vs. the known proc pointers for these two threads. A way of preventing these threads from being starved for I/O but still placing limits on their outstanding I/O would be desirable. Set this flag in ffs_copyonwrite() to prevent bufwrite() calls from blocking on the runningbufspace check while holding snaplk. This prevents snaplk from being held for an arbitrarily long period of time if runningbufspace is high and greatly reduces the contention for snaplk. The disadvantage is that ffs_copyonwrite() can start a large amount of I/O if there are a large number of snapshots, which could cause a deadlock in other parts of the code. Call runningbufwakeup() in ffs_copyonwrite() to decrement runningbufspace before attempting to grab snaplk so that I/O requests waiting on snaplk are not counted in runningbufspace as being in-progress. Increment runningbufspace again before actually launching the original I/O request. Prior to the above two changes, the system could deadlock if enough I/O requests were blocked by snaplk to prevent runningbufspace from falling below lorunningspace and one of the bawrite() calls in ffs_copyonwrite() blocked in waitrunningbufspace() while holding snaplk. See <http://www.holm.cc/stress/log/cons143.html>
2005-09-30 01:30:01 +00:00
/*
* I/O on bp will now be started, so count it in runningbufspace.
*/
A side effect of calling runningbufwakeup() is that bp->b_runningbufspace is cleared. Save old value and restore bp->b_runningbufspace before returning from ffs_copyonwrite().
2006-05-03 00:04:38 +00:00
if (saved_runningbufspace != 0) {
bp->b_runningbufspace = saved_runningbufspace;
Adjust some variables (mostly related to the buffer cache) that hold address space sizes to be longs instead of ints. Specifically, the follow values are now longs: runningbufspace, bufspace, maxbufspace, bufmallocspace, maxbufmallocspace, lobufspace, hibufspace, lorunningspace, hirunningspace, maxswzone, maxbcache, and maxpipekva. Previously, a relatively small number (~ 44000) of buffers set in kern.nbuf would result in integer overflows resulting either in hangs or bogus values of hidirtybuffers and lodirtybuffers. Now one has to overflow a long to see such problems. There was a check for a nbuf setting that would cause overflows in the auto-tuning of nbuf. I've changed it to always check and cap nbuf but warn if a user-supplied tunable would cause overflow. Note that this changes the ABI of several sysctls that are used by things like top(1), etc., so any MFC would probably require a some gross shims to allow for that. MFC after: 1 month
2009-03-09 19:35:20 +00:00
atomic_add_long(&runningbufspace, bp->b_runningbufspace);
A side effect of calling runningbufwakeup() is that bp->b_runningbufspace is cleared. Save old value and restore bp->b_runningbufspace before returning from ffs_copyonwrite().
2006-05-03 00:04:38 +00:00
}
Add snapshots to the fast filesystem. Most of the changes support the gating of system calls that cause modifications to the underlying filesystem. The gating can be enabled by any filesystem that needs to consistently suspend operations by adding the vop_stdgetwritemount to their set of vnops. Once gating is enabled, the function vfs_write_suspend stops all new write operations to a filesystem, allows any filesystem modifying system calls already in progress to complete, then sync's the filesystem to disk and returns. The function vfs_write_resume allows the suspended write operations to begin again. Gating is not added by default for all filesystems as for SMP systems it adds two extra locks to such critical kernel paths as the write system call. Thus, gating should only be added as needed. Details on the use and current status of snapshots in FFS can be found in /sys/ufs/ffs/README.snapshot so for brevity and timelyness is not included here. Unless and until you create a snapshot file, these changes should have no effect on your system (famous last words).
2000-07-11 22:07:57 +00:00
return (error);
}
Update to soft updates journaling to properly track freed blocks that get claimed by snapshots. Submitted by: Jeff Roberson Tested by: Peter Holm
2011-06-12 19:27:05 +00:00
/*
* sync snapshots to force freework records waiting on snapshots to claim
* blocks to free.
*/
void
ffs_sync_snap(mp, waitfor)
struct mount *mp;
int waitfor;
{
struct snapdata *sn;
struct vnode *devvp;
struct vnode *vp;
struct inode *ip;
devvp = VFSTOUFS(mp)->um_devvp;
if ((devvp->v_vflag & VV_COPYONWRITE) == 0)
return;
for (;;) {
VI_LOCK(devvp);
sn = devvp->v_rdev->si_snapdata;
if (sn == NULL) {
VI_UNLOCK(devvp);
return;
}
if (lockmgr(&sn->sn_lock,
LK_INTERLOCK | LK_EXCLUSIVE | LK_SLEEPFAIL,
VI_MTX(devvp)) == 0)
break;
}
TAILQ_FOREACH(ip, &sn->sn_head, i_nextsnap) {
vp = ITOV(ip);
Add a third flags argument to ffs_syncvnode to avoid a possible conflict with MNT_WAIT flags that passed in its second argument. This will be MFC'ed together with r232351. Discussed with: kib
2012-03-25 00:02:37 +00:00
ffs_syncvnode(vp, waitfor, NO_INO_UPDT);
Update to soft updates journaling to properly track freed blocks that get claimed by snapshots. Submitted by: Jeff Roberson Tested by: Peter Holm
2011-06-12 19:27:05 +00:00
}
lockmgr(&sn->sn_lock, LK_RELEASE, NULL);
}
Add snapshots to the fast filesystem. Most of the changes support the gating of system calls that cause modifications to the underlying filesystem. The gating can be enabled by any filesystem that needs to consistently suspend operations by adding the vop_stdgetwritemount to their set of vnops. Once gating is enabled, the function vfs_write_suspend stops all new write operations to a filesystem, allows any filesystem modifying system calls already in progress to complete, then sync's the filesystem to disk and returns. The function vfs_write_resume allows the suspended write operations to begin again. Gating is not added by default for all filesystems as for SMP systems it adds two extra locks to such critical kernel paths as the write system call. Thus, gating should only be added as needed. Details on the use and current status of snapshots in FFS can be found in /sys/ufs/ffs/README.snapshot so for brevity and timelyness is not included here. Unless and until you create a snapshot file, these changes should have no effect on your system (famous last words).
2000-07-11 22:07:57 +00:00
/*
* Read the specified block into the given buffer.
* Much of this boiler-plate comes from bwrite().
*/
static int
Create struct snapdata which contains the snapshot fields from cdev and the previously malloc'ed snapshot lock. Malloc struct snapdata instead of just the lock. Replace snapshot fields in cdev with pointer to snapdata (saves 16 bytes). While here, give the private readblock() function a vnode argument in preparation for moving UFS to access GEOM directly.
2004-09-13 07:29:45 +00:00
readblock(vp, bp, lbn)
struct vnode *vp;
Add snapshots to the fast filesystem. Most of the changes support the gating of system calls that cause modifications to the underlying filesystem. The gating can be enabled by any filesystem that needs to consistently suspend operations by adding the vop_stdgetwritemount to their set of vnops. Once gating is enabled, the function vfs_write_suspend stops all new write operations to a filesystem, allows any filesystem modifying system calls already in progress to complete, then sync's the filesystem to disk and returns. The function vfs_write_resume allows the suspended write operations to begin again. Gating is not added by default for all filesystems as for SMP systems it adds two extra locks to such critical kernel paths as the write system call. Thus, gating should only be added as needed. Details on the use and current status of snapshots in FFS can be found in /sys/ufs/ffs/README.snapshot so for brevity and timelyness is not included here. Unless and until you create a snapshot file, these changes should have no effect on your system (famous last words).
2000-07-11 22:07:57 +00:00
struct buf *bp;
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
ufs2_daddr_t lbn;
Add snapshots to the fast filesystem. Most of the changes support the gating of system calls that cause modifications to the underlying filesystem. The gating can be enabled by any filesystem that needs to consistently suspend operations by adding the vop_stdgetwritemount to their set of vnops. Once gating is enabled, the function vfs_write_suspend stops all new write operations to a filesystem, allows any filesystem modifying system calls already in progress to complete, then sync's the filesystem to disk and returns. The function vfs_write_resume allows the suspended write operations to begin again. Gating is not added by default for all filesystems as for SMP systems it adds two extra locks to such critical kernel paths as the write system call. Thus, gating should only be added as needed. Details on the use and current status of snapshots in FFS can be found in /sys/ufs/ffs/README.snapshot so for brevity and timelyness is not included here. Unless and until you create a snapshot file, these changes should have no effect on your system (famous last words).
2000-07-11 22:07:57 +00:00
{
Create struct snapdata which contains the snapshot fields from cdev and the previously malloc'ed snapshot lock. Malloc struct snapdata instead of just the lock. Replace snapshot fields in cdev with pointer to snapdata (saves 16 bytes). While here, give the private readblock() function a vnode argument in preparation for moving UFS to access GEOM directly.
2004-09-13 07:29:45 +00:00
struct inode *ip = VTOI(vp);
Move UFS from DEVFS backing to GEOM backing. This eliminates a bunch of vnode overhead (approx 1-2 % speed improvement) and gives us more control over the access to the storage device. Access counts on the underlying device are not correctly tracked and therefore it is possible to read-only mount the same disk device multiple times: syv# mount -p /dev/md0 /var ufs rw 2 2 /dev/ad0 /mnt ufs ro 1 1 /dev/ad0 /mnt2 ufs ro 1 1 /dev/ad0 /mnt3 ufs ro 1 1 Since UFS/FFS is not a synchrousely consistent filesystem (ie: it caches things in RAM) this is not possible with read-write mounts, and the system will correctly reject this. Details: Add a geom consumer and a bufobj pointer to ufsmount. Eliminate the vnode argument from softdep_disk_prewrite(). Pick the vnode out of bp->b_vp for now. Eventually we should find it through bp->b_bufobj->b_private. In the mountcode, use g_vfs_open() once we have used VOP_ACCESS() to check permissions. When upgrading and downgrading between r/o and r/w do the right thing with GEOM access counts. Remove all the workarounds for not being able to do this with VOP_OPEN(). If we are the root mount, drop the exclusive access count until we upgrade to r/w. This allows fsck of the root filesystem and the MNT_RELOAD to work correctly. Set bo_private to the GEOM consumer on the device bufobj. Change the ffs_ops->strategy function to call g_vfs_strategy() In ufs_strategy() directly call the strategy on the disk bufobj. Same in rawread. In ffs_fsync() we will no longer see VCHR device nodes, so remove code which synced the filesystem mounted on it, in case we came there. I'm not sure this code made sense in the first place since we would have taken the specfs route on such a vnode. Redo the highly bogus readblock() function in the snapshot code to something slightly less bogus: Constructing an uio and using physio was really quite a detour. Instead just fill in a bio and ship it down.
2004-10-29 10:15:56 +00:00
struct bio *bip;
Add snapshots to the fast filesystem. Most of the changes support the gating of system calls that cause modifications to the underlying filesystem. The gating can be enabled by any filesystem that needs to consistently suspend operations by adding the vop_stdgetwritemount to their set of vnops. Once gating is enabled, the function vfs_write_suspend stops all new write operations to a filesystem, allows any filesystem modifying system calls already in progress to complete, then sync's the filesystem to disk and returns. The function vfs_write_resume allows the suspended write operations to begin again. Gating is not added by default for all filesystems as for SMP systems it adds two extra locks to such critical kernel paths as the write system call. Thus, gating should only be added as needed. Details on the use and current status of snapshots in FFS can be found in /sys/ufs/ffs/README.snapshot so for brevity and timelyness is not included here. Unless and until you create a snapshot file, these changes should have no effect on your system (famous last words).
2000-07-11 22:07:57 +00:00
Move UFS from DEVFS backing to GEOM backing. This eliminates a bunch of vnode overhead (approx 1-2 % speed improvement) and gives us more control over the access to the storage device. Access counts on the underlying device are not correctly tracked and therefore it is possible to read-only mount the same disk device multiple times: syv# mount -p /dev/md0 /var ufs rw 2 2 /dev/ad0 /mnt ufs ro 1 1 /dev/ad0 /mnt2 ufs ro 1 1 /dev/ad0 /mnt3 ufs ro 1 1 Since UFS/FFS is not a synchrousely consistent filesystem (ie: it caches things in RAM) this is not possible with read-write mounts, and the system will correctly reject this. Details: Add a geom consumer and a bufobj pointer to ufsmount. Eliminate the vnode argument from softdep_disk_prewrite(). Pick the vnode out of bp->b_vp for now. Eventually we should find it through bp->b_bufobj->b_private. In the mountcode, use g_vfs_open() once we have used VOP_ACCESS() to check permissions. When upgrading and downgrading between r/o and r/w do the right thing with GEOM access counts. Remove all the workarounds for not being able to do this with VOP_OPEN(). If we are the root mount, drop the exclusive access count until we upgrade to r/w. This allows fsck of the root filesystem and the MNT_RELOAD to work correctly. Set bo_private to the GEOM consumer on the device bufobj. Change the ffs_ops->strategy function to call g_vfs_strategy() In ufs_strategy() directly call the strategy on the disk bufobj. Same in rawread. In ffs_fsync() we will no longer see VCHR device nodes, so remove code which synced the filesystem mounted on it, in case we came there. I'm not sure this code made sense in the first place since we would have taken the specfs route on such a vnode. Redo the highly bogus readblock() function in the snapshot code to something slightly less bogus: Constructing an uio and using physio was really quite a detour. Instead just fill in a bio and ship it down.
2004-10-29 10:15:56 +00:00
bip = g_alloc_bio();
bip->bio_cmd = BIO_READ;
bip->bio_offset = dbtob(fsbtodb(ip->i_fs, blkstofrags(ip->i_fs, lbn)));
bip->bio_data = bp->b_data;
bip->bio_length = bp->b_bcount;
- Set bio_done directly to NULL to indicate that we want to wait for the bio. - Use biowait() instead of copying the code. MFC after: 1 month
2006-05-05 10:06:22 +00:00
bip->bio_done = NULL;
Move UFS from DEVFS backing to GEOM backing. This eliminates a bunch of vnode overhead (approx 1-2 % speed improvement) and gives us more control over the access to the storage device. Access counts on the underlying device are not correctly tracked and therefore it is possible to read-only mount the same disk device multiple times: syv# mount -p /dev/md0 /var ufs rw 2 2 /dev/ad0 /mnt ufs ro 1 1 /dev/ad0 /mnt2 ufs ro 1 1 /dev/ad0 /mnt3 ufs ro 1 1 Since UFS/FFS is not a synchrousely consistent filesystem (ie: it caches things in RAM) this is not possible with read-write mounts, and the system will correctly reject this. Details: Add a geom consumer and a bufobj pointer to ufsmount. Eliminate the vnode argument from softdep_disk_prewrite(). Pick the vnode out of bp->b_vp for now. Eventually we should find it through bp->b_bufobj->b_private. In the mountcode, use g_vfs_open() once we have used VOP_ACCESS() to check permissions. When upgrading and downgrading between r/o and r/w do the right thing with GEOM access counts. Remove all the workarounds for not being able to do this with VOP_OPEN(). If we are the root mount, drop the exclusive access count until we upgrade to r/w. This allows fsck of the root filesystem and the MNT_RELOAD to work correctly. Set bo_private to the GEOM consumer on the device bufobj. Change the ffs_ops->strategy function to call g_vfs_strategy() In ufs_strategy() directly call the strategy on the disk bufobj. Same in rawread. In ffs_fsync() we will no longer see VCHR device nodes, so remove code which synced the filesystem mounted on it, in case we came there. I'm not sure this code made sense in the first place since we would have taken the specfs route on such a vnode. Redo the highly bogus readblock() function in the snapshot code to something slightly less bogus: Constructing an uio and using physio was really quite a detour. Instead just fill in a bio and ship it down.
2004-10-29 10:15:56 +00:00
g_io_request(bip, ip->i_devvp->v_bufobj.bo_private);
- Set bio_done directly to NULL to indicate that we want to wait for the bio. - Use biowait() instead of copying the code. MFC after: 1 month
2006-05-05 10:06:22 +00:00
bp->b_error = biowait(bip, "snaprdb");
Move UFS from DEVFS backing to GEOM backing. This eliminates a bunch of vnode overhead (approx 1-2 % speed improvement) and gives us more control over the access to the storage device. Access counts on the underlying device are not correctly tracked and therefore it is possible to read-only mount the same disk device multiple times: syv# mount -p /dev/md0 /var ufs rw 2 2 /dev/ad0 /mnt ufs ro 1 1 /dev/ad0 /mnt2 ufs ro 1 1 /dev/ad0 /mnt3 ufs ro 1 1 Since UFS/FFS is not a synchrousely consistent filesystem (ie: it caches things in RAM) this is not possible with read-write mounts, and the system will correctly reject this. Details: Add a geom consumer and a bufobj pointer to ufsmount. Eliminate the vnode argument from softdep_disk_prewrite(). Pick the vnode out of bp->b_vp for now. Eventually we should find it through bp->b_bufobj->b_private. In the mountcode, use g_vfs_open() once we have used VOP_ACCESS() to check permissions. When upgrading and downgrading between r/o and r/w do the right thing with GEOM access counts. Remove all the workarounds for not being able to do this with VOP_OPEN(). If we are the root mount, drop the exclusive access count until we upgrade to r/w. This allows fsck of the root filesystem and the MNT_RELOAD to work correctly. Set bo_private to the GEOM consumer on the device bufobj. Change the ffs_ops->strategy function to call g_vfs_strategy() In ufs_strategy() directly call the strategy on the disk bufobj. Same in rawread. In ffs_fsync() we will no longer see VCHR device nodes, so remove code which synced the filesystem mounted on it, in case we came there. I'm not sure this code made sense in the first place since we would have taken the specfs route on such a vnode. Redo the highly bogus readblock() function in the snapshot code to something slightly less bogus: Constructing an uio and using physio was really quite a detour. Instead just fill in a bio and ship it down.
2004-10-29 10:15:56 +00:00
g_destroy_bio(bip);
return (bp->b_error);
Add snapshots to the fast filesystem. Most of the changes support the gating of system calls that cause modifications to the underlying filesystem. The gating can be enabled by any filesystem that needs to consistently suspend operations by adding the vop_stdgetwritemount to their set of vnops. Once gating is enabled, the function vfs_write_suspend stops all new write operations to a filesystem, allows any filesystem modifying system calls already in progress to complete, then sync's the filesystem to disk and returns. The function vfs_write_resume allows the suspended write operations to begin again. Gating is not added by default for all filesystems as for SMP systems it adds two extra locks to such critical kernel paths as the write system call. Thus, gating should only be added as needed. Details on the use and current status of snapshots in FFS can be found in /sys/ufs/ffs/README.snapshot so for brevity and timelyness is not included here. Unless and until you create a snapshot file, these changes should have no effect on your system (famous last words).
2000-07-11 22:07:57 +00:00
}
New option: NO_FFS_SNAPSHOT. I did this in p4 about the same time that NetBSD implemented it independently of them (don't know which one was actually first). This saves about 24k for those times you don't need snapshot support (like when running off a ram disk, or in an embedded environment where size matters).
2006-01-06 04:44:09 +00:00
When attempt is made to suspend a filesystem that is already syspended, wait until the current suspension is lifted instead of silently returning success immediately. The consequences of calling vfs_write() resume when not owning the suspension are not well-defined at best. Add the vfs_susp_clean() mount method to be called from vfs_write_resume(). Set it to process_deferred_inactive() for ffs, and stop calling it manually. Add the thread flag TDP_IGNSUSP that allows to bypass the suspension point in the vn_start_write. It is intended for use by VFS in the situations where the suspender want to do some i/o requiring calls to vn_start_write(), and this i/o cannot be done later. Reviewed by: tegge In collaboration with: pho MFC after: 1 month
2008-09-16 11:51:06 +00:00
#endif
Block secondary writes while expunging active unlinked files. Fix detection of active unlinked files by checking VI_OWEINACT and VI_DOINGINACT in addition to v_usecount. Defer inactive handling for unlinked files if the file system is mostly suspended (secondary writes being blocked). Perform deferred inactive handling after the file system is resumed.
2006-03-11 01:08:37 +00:00
/*
* Process file deletes that were deferred by ufs_inactive() due to
Do not translate the IN_ACCESS inode flag into the IN_MODIFIED while filesystem is suspending/suspended. Doing so may result in deadlock. Instead, set the (new) IN_LAZYACCESS flag, that becomes IN_MODIFIED when suspend is lifted. Change the locking protocol in order to set the IN_ACCESS and timestamps without upgrading shared vnode lock to exclusive (see comments in the inode.h). Before that, inode was modified while holding only shared lock. Tested by: Peter Holm Reviewed by: tegge, bde Approved by: pjd (mentor) MFC after: 3 weeks
2006-10-10 09:20:54 +00:00
* the file system being suspended. Transfer IN_LAZYACCESS into
* IN_MODIFIED for vnodes that were accessed during suspension.
Block secondary writes while expunging active unlinked files. Fix detection of active unlinked files by checking VI_OWEINACT and VI_DOINGINACT in addition to v_usecount. Defer inactive handling for unlinked files if the file system is mostly suspended (secondary writes being blocked). Perform deferred inactive handling after the file system is resumed.
2006-03-11 01:08:37 +00:00
*/
When attempt is made to suspend a filesystem that is already syspended, wait until the current suspension is lifted instead of silently returning success immediately. The consequences of calling vfs_write() resume when not owning the suspension are not well-defined at best. Add the vfs_susp_clean() mount method to be called from vfs_write_resume(). Set it to process_deferred_inactive() for ffs, and stop calling it manually. Add the thread flag TDP_IGNSUSP that allows to bypass the suspension point in the vn_start_write. It is intended for use by VFS in the situations where the suspender want to do some i/o requiring calls to vn_start_write(), and this i/o cannot be done later. Reviewed by: tegge In collaboration with: pho MFC after: 1 month
2008-09-16 11:51:06 +00:00
void
Block secondary writes while expunging active unlinked files. Fix detection of active unlinked files by checking VI_OWEINACT and VI_DOINGINACT in addition to v_usecount. Defer inactive handling for unlinked files if the file system is mostly suspended (secondary writes being blocked). Perform deferred inactive handling after the file system is resumed.
2006-03-11 01:08:37 +00:00
process_deferred_inactive(struct mount *mp)
{
struct vnode *vp, *mvp;
Do not translate the IN_ACCESS inode flag into the IN_MODIFIED while filesystem is suspending/suspended. Doing so may result in deadlock. Instead, set the (new) IN_LAZYACCESS flag, that becomes IN_MODIFIED when suspend is lifted. Change the locking protocol in order to set the IN_ACCESS and timestamps without upgrading shared vnode lock to exclusive (see comments in the inode.h). Before that, inode was modified while holding only shared lock. Tested by: Peter Holm Reviewed by: tegge, bde Approved by: pjd (mentor) MFC after: 3 weeks
2006-10-10 09:20:54 +00:00
struct inode *ip;
Block secondary writes while expunging active unlinked files. Fix detection of active unlinked files by checking VI_OWEINACT and VI_DOINGINACT in addition to v_usecount. Defer inactive handling for unlinked files if the file system is mostly suspended (secondary writes being blocked). Perform deferred inactive handling after the file system is resumed.
2006-03-11 01:08:37 +00:00
struct thread *td;
int error;
td = curthread;
(void) vn_start_secondary_write(NULL, &mp, V_WAIT);
loop:
Replace the MNT_VNODE_FOREACH interface with MNT_VNODE_FOREACH_ALL. The primary changes are that the user of the interface no longer needs to manage the mount-mutex locking and that the vnode that is returned has its mutex locked (thus avoiding the need to check to see if its is DOOMED or other possible end of life senarios). To minimize compatibility issues for third-party developers, the old MNT_VNODE_FOREACH interface will remain available so that this change can be MFC'ed to 9. Following the MFC to 9, MNT_VNODE_FOREACH will be removed in head. The reason for this update is to prepare for the addition of the MNT_VNODE_FOREACH_ACTIVE interface that will loop over just the active vnodes associated with a mount point (typically less than 1% of the vnodes associated with the mount point). Reviewed by: kib Tested by: Peter Holm MFC after: 2 weeks
2012-04-17 16:28:22 +00:00
MNT_VNODE_FOREACH_ALL(vp, mp, mvp) {
Do not translate the IN_ACCESS inode flag into the IN_MODIFIED while filesystem is suspending/suspended. Doing so may result in deadlock. Instead, set the (new) IN_LAZYACCESS flag, that becomes IN_MODIFIED when suspend is lifted. Change the locking protocol in order to set the IN_ACCESS and timestamps without upgrading shared vnode lock to exclusive (see comments in the inode.h). Before that, inode was modified while holding only shared lock. Tested by: Peter Holm Reviewed by: tegge, bde Approved by: pjd (mentor) MFC after: 3 weeks
2006-10-10 09:20:54 +00:00
/*
* IN_LAZYACCESS is checked here without holding any
* vnode lock, but this flag is set only while holding
* vnode interlock.
*/
Replace the MNT_VNODE_FOREACH interface with MNT_VNODE_FOREACH_ALL. The primary changes are that the user of the interface no longer needs to manage the mount-mutex locking and that the vnode that is returned has its mutex locked (thus avoiding the need to check to see if its is DOOMED or other possible end of life senarios). To minimize compatibility issues for third-party developers, the old MNT_VNODE_FOREACH interface will remain available so that this change can be MFC'ed to 9. Following the MFC to 9, MNT_VNODE_FOREACH will be removed in head. The reason for this update is to prepare for the addition of the MNT_VNODE_FOREACH_ACTIVE interface that will loop over just the active vnodes associated with a mount point (typically less than 1% of the vnodes associated with the mount point). Reviewed by: kib Tested by: Peter Holm MFC after: 2 weeks
2012-04-17 16:28:22 +00:00
if (vp->v_type == VNON ||
Do not translate the IN_ACCESS inode flag into the IN_MODIFIED while filesystem is suspending/suspended. Doing so may result in deadlock. Instead, set the (new) IN_LAZYACCESS flag, that becomes IN_MODIFIED when suspend is lifted. Change the locking protocol in order to set the IN_ACCESS and timestamps without upgrading shared vnode lock to exclusive (see comments in the inode.h). Before that, inode was modified while holding only shared lock. Tested by: Peter Holm Reviewed by: tegge, bde Approved by: pjd (mentor) MFC after: 3 weeks
2006-10-10 09:20:54 +00:00
((VTOI(vp)->i_flag & IN_LAZYACCESS) == 0 &&
Replace the MNT_VNODE_FOREACH interface with MNT_VNODE_FOREACH_ALL. The primary changes are that the user of the interface no longer needs to manage the mount-mutex locking and that the vnode that is returned has its mutex locked (thus avoiding the need to check to see if its is DOOMED or other possible end of life senarios). To minimize compatibility issues for third-party developers, the old MNT_VNODE_FOREACH interface will remain available so that this change can be MFC'ed to 9. Following the MFC to 9, MNT_VNODE_FOREACH will be removed in head. The reason for this update is to prepare for the addition of the MNT_VNODE_FOREACH_ACTIVE interface that will loop over just the active vnodes associated with a mount point (typically less than 1% of the vnodes associated with the mount point). Reviewed by: kib Tested by: Peter Holm MFC after: 2 weeks
2012-04-17 16:28:22 +00:00
((vp->v_iflag & VI_OWEINACT) == 0 || vp->v_usecount > 0))) {
Block secondary writes while expunging active unlinked files. Fix detection of active unlinked files by checking VI_OWEINACT and VI_DOINGINACT in addition to v_usecount. Defer inactive handling for unlinked files if the file system is mostly suspended (secondary writes being blocked). Perform deferred inactive handling after the file system is resumed.
2006-03-11 01:08:37 +00:00
VI_UNLOCK(vp);
continue;
}
vholdl(vp);
vn_lock() is currently only used with the 'curthread' passed as argument. Remove this argument and pass curthread directly to underlying VOP_LOCK1() VFS method. This modify makes the code cleaner and in particular remove an annoying dependence helping next lockmgr() cleanup. KPI results, obviously, changed. Manpage and FreeBSD_version will be updated through further commits. As a side note, would be valuable to say that next commits will address a similar cleanup about VFS methods, in particular vop_lock1 and vop_unlock. Tested by: Diego Sardina <siarodx at gmail dot com>, Andrea Di Pasquale <whyx dot it at gmail dot com>
2008-01-10 01:10:58 +00:00
error = vn_lock(vp, LK_EXCLUSIVE | LK_INTERLOCK);
Block secondary writes while expunging active unlinked files. Fix detection of active unlinked files by checking VI_OWEINACT and VI_DOINGINACT in addition to v_usecount. Defer inactive handling for unlinked files if the file system is mostly suspended (secondary writes being blocked). Perform deferred inactive handling after the file system is resumed.
2006-03-11 01:08:37 +00:00
if (error != 0) {
vdrop(vp);
if (error == ENOENT)
continue; /* vnode recycled */
Replace the MNT_VNODE_FOREACH interface with MNT_VNODE_FOREACH_ALL. The primary changes are that the user of the interface no longer needs to manage the mount-mutex locking and that the vnode that is returned has its mutex locked (thus avoiding the need to check to see if its is DOOMED or other possible end of life senarios). To minimize compatibility issues for third-party developers, the old MNT_VNODE_FOREACH interface will remain available so that this change can be MFC'ed to 9. Following the MFC to 9, MNT_VNODE_FOREACH will be removed in head. The reason for this update is to prepare for the addition of the MNT_VNODE_FOREACH_ACTIVE interface that will loop over just the active vnodes associated with a mount point (typically less than 1% of the vnodes associated with the mount point). Reviewed by: kib Tested by: Peter Holm MFC after: 2 weeks
2012-04-17 16:28:22 +00:00
MNT_VNODE_FOREACH_ALL_ABORT(mp, mvp);
Block secondary writes while expunging active unlinked files. Fix detection of active unlinked files by checking VI_OWEINACT and VI_DOINGINACT in addition to v_usecount. Defer inactive handling for unlinked files if the file system is mostly suspended (secondary writes being blocked). Perform deferred inactive handling after the file system is resumed.
2006-03-11 01:08:37 +00:00
goto loop;
}
Do not translate the IN_ACCESS inode flag into the IN_MODIFIED while filesystem is suspending/suspended. Doing so may result in deadlock. Instead, set the (new) IN_LAZYACCESS flag, that becomes IN_MODIFIED when suspend is lifted. Change the locking protocol in order to set the IN_ACCESS and timestamps without upgrading shared vnode lock to exclusive (see comments in the inode.h). Before that, inode was modified while holding only shared lock. Tested by: Peter Holm Reviewed by: tegge, bde Approved by: pjd (mentor) MFC after: 3 weeks
2006-10-10 09:20:54 +00:00
ip = VTOI(vp);
if ((ip->i_flag & IN_LAZYACCESS) != 0) {
ip->i_flag &= ~IN_LAZYACCESS;
ip->i_flag |= IN_MODIFIED;
}
Block secondary writes while expunging active unlinked files. Fix detection of active unlinked files by checking VI_OWEINACT and VI_DOINGINACT in addition to v_usecount. Defer inactive handling for unlinked files if the file system is mostly suspended (secondary writes being blocked). Perform deferred inactive handling after the file system is resumed.
2006-03-11 01:08:37 +00:00
VI_LOCK(vp);
Do not translate the IN_ACCESS inode flag into the IN_MODIFIED while filesystem is suspending/suspended. Doing so may result in deadlock. Instead, set the (new) IN_LAZYACCESS flag, that becomes IN_MODIFIED when suspend is lifted. Change the locking protocol in order to set the IN_ACCESS and timestamps without upgrading shared vnode lock to exclusive (see comments in the inode.h). Before that, inode was modified while holding only shared lock. Tested by: Peter Holm Reviewed by: tegge, bde Approved by: pjd (mentor) MFC after: 3 weeks
2006-10-10 09:20:54 +00:00
if ((vp->v_iflag & VI_OWEINACT) == 0 || vp->v_usecount > 0) {
Block secondary writes while expunging active unlinked files. Fix detection of active unlinked files by checking VI_OWEINACT and VI_DOINGINACT in addition to v_usecount. Defer inactive handling for unlinked files if the file system is mostly suspended (secondary writes being blocked). Perform deferred inactive handling after the file system is resumed.
2006-03-11 01:08:37 +00:00
VI_UNLOCK(vp);
VOP_LOCK1() (and so VOP_LOCK()) and VOP_UNLOCK() are only used in conjuction with 'thread' argument passing which is always curthread. Remove the unuseful extra-argument and pass explicitly curthread to lower layer functions, when necessary. KPI results broken by this change, which should affect several ports, so version bumping and manpage update will be further committed. Tested by: kris, pho, Diego Sardina <siarodx at gmail dot com>
2008-01-13 14:44:15 +00:00
VOP_UNLOCK(vp, 0);
Block secondary writes while expunging active unlinked files. Fix detection of active unlinked files by checking VI_OWEINACT and VI_DOINGINACT in addition to v_usecount. Defer inactive handling for unlinked files if the file system is mostly suspended (secondary writes being blocked). Perform deferred inactive handling after the file system is resumed.
2006-03-11 01:08:37 +00:00
vdrop(vp);
continue;
}
Export vinactive() from kern/vfs_subr.c (e.g., make it no longer static and declare its prototype in sys/vnode.h) so that it can be called from process_deferred_inactive() (in ufs/ffs/ffs_snapshot.c) instead of the body of vinactive() being cut and pasted into process_deferred_inactive(). Reviewed by: kib MFC after: 2 weeks
2012-04-11 23:01:11 +00:00
vinactive(vp, td);
Block secondary writes while expunging active unlinked files. Fix detection of active unlinked files by checking VI_OWEINACT and VI_DOINGINACT in addition to v_usecount. Defer inactive handling for unlinked files if the file system is mostly suspended (secondary writes being blocked). Perform deferred inactive handling after the file system is resumed.
2006-03-11 01:08:37 +00:00
VNASSERT((vp->v_iflag & VI_OWEINACT) == 0, vp,
("process_deferred_inactive: got VI_OWEINACT"));
VI_UNLOCK(vp);
VOP_LOCK1() (and so VOP_LOCK()) and VOP_UNLOCK() are only used in conjuction with 'thread' argument passing which is always curthread. Remove the unuseful extra-argument and pass explicitly curthread to lower layer functions, when necessary. KPI results broken by this change, which should affect several ports, so version bumping and manpage update will be further committed. Tested by: kris, pho, Diego Sardina <siarodx at gmail dot com>
2008-01-13 14:44:15 +00:00
VOP_UNLOCK(vp, 0);
Block secondary writes while expunging active unlinked files. Fix detection of active unlinked files by checking VI_OWEINACT and VI_DOINGINACT in addition to v_usecount. Defer inactive handling for unlinked files if the file system is mostly suspended (secondary writes being blocked). Perform deferred inactive handling after the file system is resumed.
2006-03-11 01:08:37 +00:00
vdrop(vp);
}
vn_finished_secondary_write(mp);
}
Close a race when VOP_LOCK() on a snapshot file is attempted at the same time as it is changed back into a normal file. The locker would get the shared "snaplk" lock which would no longer be the correct lock for the vnode.
2006-05-02 23:52:43 +00:00
When attempt is made to suspend a filesystem that is already syspended, wait until the current suspension is lifted instead of silently returning success immediately. The consequences of calling vfs_write() resume when not owning the suspension are not well-defined at best. Add the vfs_susp_clean() mount method to be called from vfs_write_resume(). Set it to process_deferred_inactive() for ffs, and stop calling it manually. Add the thread flag TDP_IGNSUSP that allows to bypass the suspension point in the vn_start_write. It is intended for use by VFS in the situations where the suspender want to do some i/o requiring calls to vn_start_write(), and this i/o cannot be done later. Reviewed by: tegge In collaboration with: pho MFC after: 1 month
2008-09-16 11:51:06 +00:00
#ifndef NO_FFS_SNAPSHOT
- Don't free snapdata structures when they are no longer in use. Keeping the lockmgr lock valid allows us to switch the v_lock pointer in snapshot vnodes between the embedded lockmgr lock and snapdata lock without needing the vnode interlock to protect against races - Keep unused snapdata structures in a list. - Add a function to lock the devvp and allocate a snapdata to it or acquire a new one without races. The old function was safe from creation races because we set the mount flag when creating snapshots and thus serializing them. However, it might have been subject to destroying races. Reviewed by: tegge
2008-03-31 07:47:08 +00:00
static struct snapdata *
ffs_snapdata_alloc(void)
{
struct snapdata *sn;
/*
* Fetch a snapdata from the free list if there is one available.
*/
mtx_lock(&snapfree_lock);
sn = LIST_FIRST(&snapfree);
if (sn != NULL)
LIST_REMOVE(sn, sn_link);
mtx_unlock(&snapfree_lock);
if (sn != NULL)
return (sn);
/*
* If there were no free snapdatas allocate one.
*/
sn = malloc(sizeof *sn, M_UFSMNT, M_WAITOK | M_ZERO);
TAILQ_INIT(&sn->sn_head);
lockinit(&sn->sn_lock, PVFS, "snaplk", VLKTIMEOUT,
LK_CANRECURSE | LK_NOSHARE);
return (sn);
}
/*
* The snapdata is never freed because we can not be certain that
* there are no threads sleeping on the snap lock. Persisting
* them permanently avoids costly synchronization in ffs_lock().
*/
static void
ffs_snapdata_free(struct snapdata *sn)
{
mtx_lock(&snapfree_lock);
LIST_INSERT_HEAD(&snapfree, sn, sn_link);
mtx_unlock(&snapfree_lock);
}
Close a race when VOP_LOCK() on a snapshot file is attempted at the same time as it is changed back into a normal file. The locker would get the shared "snaplk" lock which would no longer be the correct lock for the vnode.
2006-05-02 23:52:43 +00:00
/* Try to free snapdata associated with devvp */
static void
- Don't free snapdata structures when they are no longer in use. Keeping the lockmgr lock valid allows us to switch the v_lock pointer in snapshot vnodes between the embedded lockmgr lock and snapdata lock without needing the vnode interlock to protect against races - Keep unused snapdata structures in a list. - Add a function to lock the devvp and allocate a snapdata to it or acquire a new one without races. The old function was safe from creation races because we set the mount flag when creating snapshots and thus serializing them. However, it might have been subject to destroying races. Reviewed by: tegge
2008-03-31 07:47:08 +00:00
try_free_snapdata(struct vnode *devvp)
Close a race when VOP_LOCK() on a snapshot file is attempted at the same time as it is changed back into a normal file. The locker would get the shared "snaplk" lock which would no longer be the correct lock for the vnode.
2006-05-02 23:52:43 +00:00
{
struct snapdata *sn;
ufs2_daddr_t *snapblklist;
- Don't free snapdata structures when they are no longer in use. Keeping the lockmgr lock valid allows us to switch the v_lock pointer in snapshot vnodes between the embedded lockmgr lock and snapdata lock without needing the vnode interlock to protect against races - Keep unused snapdata structures in a list. - Add a function to lock the devvp and allocate a snapdata to it or acquire a new one without races. The old function was safe from creation races because we set the mount flag when creating snapshots and thus serializing them. However, it might have been subject to destroying races. Reviewed by: tegge
2008-03-31 07:47:08 +00:00
ASSERT_VI_LOCKED(devvp, "try_free_snapdata");
Close a race when VOP_LOCK() on a snapshot file is attempted at the same time as it is changed back into a normal file. The locker would get the shared "snaplk" lock which would no longer be the correct lock for the vnode.
2006-05-02 23:52:43 +00:00
sn = devvp->v_rdev->si_snapdata;
if (sn == NULL || TAILQ_FIRST(&sn->sn_head) != NULL ||
(devvp->v_vflag & VV_COPYONWRITE) == 0) {
VI_UNLOCK(devvp);
return;
}
devvp->v_rdev->si_snapdata = NULL;
devvp->v_vflag &= ~VV_COPYONWRITE;
- Don't free snapdata structures when they are no longer in use. Keeping the lockmgr lock valid allows us to switch the v_lock pointer in snapshot vnodes between the embedded lockmgr lock and snapdata lock without needing the vnode interlock to protect against races - Keep unused snapdata structures in a list. - Add a function to lock the devvp and allocate a snapdata to it or acquire a new one without races. The old function was safe from creation races because we set the mount flag when creating snapshots and thus serializing them. However, it might have been subject to destroying races. Reviewed by: tegge
2008-03-31 07:47:08 +00:00
lockmgr(&sn->sn_lock, LK_DRAIN|LK_INTERLOCK, VI_MTX(devvp));
Close a race when VOP_LOCK() on a snapshot file is attempted at the same time as it is changed back into a normal file. The locker would get the shared "snaplk" lock which would no longer be the correct lock for the vnode.
2006-05-02 23:52:43 +00:00
snapblklist = sn->sn_blklist;
sn->sn_blklist = NULL;
sn->sn_listsize = 0;
Cleanup lockmgr interface and exported KPI: - Remove the "thread" argument from the lockmgr() function as it is always curthread now - Axe lockcount() function as it is no longer used - Axe LOCKMGR_ASSERT() as it is bogus really and no currently used. Hopefully this will be soonly replaced by something suitable for it. - Remove the prototype for dumplockinfo() as the function is no longer present Addictionally: - Introduce a KASSERT() in lockstatus() in order to let it accept only curthread or NULL as they should only be passed - Do a little bit of style(9) cleanup on lockmgr.h KPI results heavilly broken by this change, so manpages and FreeBSD_version will be modified accordingly by further commits. Tested by: matteo
2008-01-24 12:34:30 +00:00
lockmgr(&sn->sn_lock, LK_RELEASE, NULL);
Close a race when VOP_LOCK() on a snapshot file is attempted at the same time as it is changed back into a normal file. The locker would get the shared "snaplk" lock which would no longer be the correct lock for the vnode.
2006-05-02 23:52:43 +00:00
if (snapblklist != NULL)
Retire the MALLOC and FREE macros. They are an abomination unto style(9). MFC after: 3 months
2008-10-23 15:53:51 +00:00
free(snapblklist, M_UFSMNT);
- Don't free snapdata structures when they are no longer in use. Keeping the lockmgr lock valid allows us to switch the v_lock pointer in snapshot vnodes between the embedded lockmgr lock and snapdata lock without needing the vnode interlock to protect against races - Keep unused snapdata structures in a list. - Add a function to lock the devvp and allocate a snapdata to it or acquire a new one without races. The old function was safe from creation races because we set the mount flag when creating snapshots and thus serializing them. However, it might have been subject to destroying races. Reviewed by: tegge
2008-03-31 07:47:08 +00:00
ffs_snapdata_free(sn);
Close a race when VOP_LOCK() on a snapshot file is attempted at the same time as it is changed back into a normal file. The locker would get the shared "snaplk" lock which would no longer be the correct lock for the vnode.
2006-05-02 23:52:43 +00:00
}
- Don't free snapdata structures when they are no longer in use. Keeping the lockmgr lock valid allows us to switch the v_lock pointer in snapshot vnodes between the embedded lockmgr lock and snapdata lock without needing the vnode interlock to protect against races - Keep unused snapdata structures in a list. - Add a function to lock the devvp and allocate a snapdata to it or acquire a new one without races. The old function was safe from creation races because we set the mount flag when creating snapshots and thus serializing them. However, it might have been subject to destroying races. Reviewed by: tegge
2008-03-31 07:47:08 +00:00
static struct snapdata *
ffs_snapdata_acquire(struct vnode *devvp)
{
struct snapdata *nsn;
struct snapdata *sn;
/*
ufs: small formatting fixes. Cleanup some extra space. Use of tabs vs. spaces. No functional change. MFC after: 3 days Reviewed by: mckusick
2014-03-02 02:52:34 +00:00
* Allocate a free snapdata. This is done before acquiring the
- Don't free snapdata structures when they are no longer in use. Keeping the lockmgr lock valid allows us to switch the v_lock pointer in snapshot vnodes between the embedded lockmgr lock and snapdata lock without needing the vnode interlock to protect against races - Keep unused snapdata structures in a list. - Add a function to lock the devvp and allocate a snapdata to it or acquire a new one without races. The old function was safe from creation races because we set the mount flag when creating snapshots and thus serializing them. However, it might have been subject to destroying races. Reviewed by: tegge
2008-03-31 07:47:08 +00:00
* devvp lock to avoid allocation while the devvp interlock is
* held.
*/
nsn = ffs_snapdata_alloc();
/*
* If there snapshots already exist on this filesystem grab a
* reference to the shared lock. Otherwise this is the first
* snapshot on this filesystem and we need to use our
* pre-allocated snapdata.
*/
VI_LOCK(devvp);
if (devvp->v_rdev->si_snapdata == NULL) {
devvp->v_rdev->si_snapdata = nsn;
nsn = NULL;
}
sn = devvp->v_rdev->si_snapdata;
/*
* Acquire the snapshot lock.
*/
lockmgr(&sn->sn_lock,
LK_INTERLOCK | LK_EXCLUSIVE | LK_RETRY, VI_MTX(devvp));
/*
* Free any unused snapdata.
*/
if (nsn != NULL)
ffs_snapdata_free(nsn);
return (sn);
}
New option: NO_FFS_SNAPSHOT. I did this in p4 about the same time that NetBSD implemented it independently of them (don't know which one was actually first). This saves about 24k for those times you don't need snapshot support (like when running off a ram disk, or in an embedded environment where size matters).
2006-01-06 04:44:09 +00:00
#endif
Reference in New Issue Copy Permalink