d/freebsd-dev
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
fc13dfd2b7
freebsd-dev/sys/netinet/ip_input.c

1376 lines
36 KiB
C
Raw Normal View History

/* -> /*- for license, minor formatting changes
2005-01-07 01:45:51 +00:00
/*-
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
* Copyright (c) 1982, 1986, 1988, 1993
* The Regents of the University of California. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
Renumber copyright clause 4 Renumber cluase 4 to 3, per what everybody else did when BSD granted them permission to remove clause 3. My insistance on keeping the same numbering for legal reasons is too pedantic, so give up on that point. Submitted by: Jan Schaumann <jschauma@stevens.edu> Pull Request: https://github.com/freebsd/freebsd/pull/96
2017-02-28 23:42:47 +00:00
* 3. Neither the name of the University nor the names of its contributors
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* @(#)ip_input.c 8.2 (Berkeley) 1/4/94
*/
Add FBSDID to all files in netinet so that people can more easily include file version information in bug reports. Approved by: re (kensmith)
2007-10-07 20:44:24 +00:00
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
Change the following environment variables to kernel options: bootp -> BOOTP bootp.nfsroot -> BOOTP_NFSROOT bootp.nfsv3 -> BOOTP_NFSV3 bootp.compat -> BOOTP_COMPAT bootp.wired_to -> BOOTP_WIRED_TO - i.e. back out the previous commit. It's already possible to pxeboot(8) with a GENERIC kernel. Pointed out by: dwmalone
2004-07-08 22:35:36 +00:00
#include "opt_bootp.h"
Include the correct header for the IPSTEALTH option.
1999-08-29 12:18:39 +00:00
#include "opt_ipstealth.h"
IPSEC support in the kernel. pr_input() routines prototype is also changed to support IPSEC and IPV6 chained protocol headers. Reviewed by: freebsd-arch, cvs-committers Obtained from: KAME project
1999-12-22 19:13:38 +00:00
#include "opt_ipsec.h"
For all files including net/vnet.h directly include opt_route.h and net/route.h. Remove the hidden include of opt_route.h and net/route.h from net/vnet.h. We need to make sure that both opt_route.h and net/route.h are included before net/vnet.h because of the way MRT figures out the number of FIBs from the kernel option. If we do not, we end up with the default number of 1 when including net/vnet.h and array sizes are wrong. This does not change the list of files which depend on opt_route.h but we can identify them now more easily.
2009-02-27 14:12:05 +00:00
#include "opt_route.h"
Update the IPv4 input path to handle reassembled frames and incoming frames with no RSS hash. When doing RSS: * Create a new IPv4 netisr which expects the frames to have been verified; it just directly dispatches to the IPv4 input path. * Once IPv4 reassembly is done, re-calculate the RSS hash with the new IP and L3 header; then reinject it as appropriate. * Update the IPv4 netisr to be a CPU affinity netisr with the RSS hash function (rss_soft_m2cpuid) - this will do a software hash if the hardware doesn't provide one. NICs that don't implement hardware RSS hashing will now benefit from RSS distribution - it'll inject into the correct destination netisr. Note: the netisr distribution doesn't work out of the box - netisr doesn't query RSS for how many CPUs and the affinity setup. Yes, netisr likely shouldn't really be doing CPU stuff anymore and should be "some kind of 'thing' that is a workqueue that may or may not have any CPU affinity"; that's for a later commit. Differential Revision: https://reviews.freebsd.org/D527 Reviewed by: grehan
2014-09-09 04:18:20 +00:00
#include "opt_rss.h"
Convert ipfw to use opt_ipfw.h
1996-06-12 19:34:33 +00:00
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
#include <sys/param.h>
#include <sys/systm.h>
Overhaul if_enc(4) and make it loadable in run-time. Use hhook(9) framework to achieve ability of loading and unloading if_enc(4) kernel module. INET and INET6 code on initialization registers two helper hooks points in the kernel. if_enc(4) module uses these helper hook points and registers its hooks. IPSEC code uses these hhook points to call helper hooks implemented in if_enc(4).
2015-11-25 07:31:59 +00:00
#include <sys/hhook.h>
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
#include <sys/mbuf.h>
Last bits (i think) of dummynet for -current.
1998-12-14 18:09:13 +00:00
#include <sys/malloc.h>
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
#include <sys/domain.h>
#include <sys/protosw.h>
#include <sys/socket.h>
#include <sys/time.h>
#include <sys/kernel.h>
Conditionally compile out V_ globals while instantiating the appropriate container structures, depending on VIMAGE_GLOBALS compile time option. Make VIMAGE_GLOBALS a new compile-time option, which by default will not be defined, resulting in instatiations of global variables selected for V_irtualization (enclosed in #ifdef VIMAGE_GLOBALS blocks) to be effectively compiled out. Instantiate new global container structures to hold V_irtualized variables: vnet_net_0, vnet_inet_0, vnet_inet6_0, vnet_ipsec_0, vnet_netgraph_0, and vnet_gif_0. Update the VSYM() macro so that depending on VIMAGE_GLOBALS the V_ macros resolve either to the original globals, or to fields inside container structures, i.e. effectively #ifdef VIMAGE_GLOBALS #define V_rt_tables rt_tables #else #define V_rt_tables vnet_net_0._rt_tables #endif Update SYSCTL_V_*() macros to operate either on globals or on fields inside container structs. Extend the internal kldsym() lookups with the ability to resolve selected fields inside the virtualization container structs. This applies only to the fields which are explicitly registered for kldsym() visibility via VNET_MOD_DECLARE() and vnet_mod_register(), currently this is done only in sys/net/if.c. Fix a few broken instances of MODULE_GLOBAL() macro use in SCTP code, and modify the MODULE_GLOBAL() macro to resolve to V_ macros, which in turn result in proper code being generated depending on VIMAGE_GLOBALS. De-virtualize local static variables in sys/contrib/pf/net/pf_subr.c which were prematurely V_irtualized by automated V_ prepending scripts during earlier merging steps. PF virtualization will be done separately, most probably after next PF import. Convert a few variable initializations at instantiation to initialization in init functions, most notably in ipfw. Also convert TUNABLE_INT() initializers for V_ variables to TUNABLE_FETCH_INT() in initializer functions. Discussed at: devsummit Strassburg Reviewed by: bz, julian Approved by: julian (mentor) Obtained from: //depot/projects/vimage-commit2/... X-MFC after: never Sponsored by: NLnet Foundation, The FreeBSD Foundation
2008-12-10 23:12:39 +00:00
#include <sys/lock.h>
Convert in_ifaddr_lock and in6_ifaddr_lock to rmlock. Both are used to protect access to IP addresses lists and they can be acquired for reading several times per packet. To reduce lock contention it is better to use rmlock here. Reviewed by: gnn (previous version) Obtained from: Yandex LLC Sponsored by: Yandex LLC Differential Revision: https://reviews.freebsd.org/D3149
2015-07-29 08:12:05 +00:00
#include <sys/rmlock.h>
Conditionally compile out V_ globals while instantiating the appropriate container structures, depending on VIMAGE_GLOBALS compile time option. Make VIMAGE_GLOBALS a new compile-time option, which by default will not be defined, resulting in instatiations of global variables selected for V_irtualization (enclosed in #ifdef VIMAGE_GLOBALS blocks) to be effectively compiled out. Instantiate new global container structures to hold V_irtualized variables: vnet_net_0, vnet_inet_0, vnet_inet6_0, vnet_ipsec_0, vnet_netgraph_0, and vnet_gif_0. Update the VSYM() macro so that depending on VIMAGE_GLOBALS the V_ macros resolve either to the original globals, or to fields inside container structures, i.e. effectively #ifdef VIMAGE_GLOBALS #define V_rt_tables rt_tables #else #define V_rt_tables vnet_net_0._rt_tables #endif Update SYSCTL_V_*() macros to operate either on globals or on fields inside container structs. Extend the internal kldsym() lookups with the ability to resolve selected fields inside the virtualization container structs. This applies only to the fields which are explicitly registered for kldsym() visibility via VNET_MOD_DECLARE() and vnet_mod_register(), currently this is done only in sys/net/if.c. Fix a few broken instances of MODULE_GLOBAL() macro use in SCTP code, and modify the MODULE_GLOBAL() macro to resolve to V_ macros, which in turn result in proper code being generated depending on VIMAGE_GLOBALS. De-virtualize local static variables in sys/contrib/pf/net/pf_subr.c which were prematurely V_irtualized by automated V_ prepending scripts during earlier merging steps. PF virtualization will be done separately, most probably after next PF import. Convert a few variable initializations at instantiation to initialization in init functions, most notably in ipfw. Also convert TUNABLE_INT() initializers for V_ variables to TUNABLE_FETCH_INT() in initializer functions. Discussed at: devsummit Strassburg Reviewed by: bz, julian Approved by: julian (mentor) Obtained from: //depot/projects/vimage-commit2/... X-MFC after: never Sponsored by: NLnet Foundation, The FreeBSD Foundation
2008-12-10 23:12:39 +00:00
#include <sys/rwlock.h>
Implement the ip, tcp, and udp DTrace providers. The probe definitions use dynamic translation so that their arguments match the definitions for these providers in Solaris and illumos. Thus, existing scripts for these providers should work unmodified on FreeBSD. Tested by: gnn, hiren MFC after: 1 month
2013-08-25 21:54:41 +00:00
#include <sys/sdt.h>
Reject source routes unless configured on by administrator.
1995-03-16 18:22:28 +00:00
#include <sys/syslog.h>
Add and move declarations to fix all of the warnings from `gcc -Wimplicit' (except in netccitt, netiso and netns) and most of the warnings from `gcc -Wnested-externs'. Fix all the bugs found. There were no serious ones.
1995-03-16 18:17:34 +00:00
#include <sys/sysctl.h>
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
Nonexistent <sys/pfil.h> -> <net/pfil.h> Kernel 'make depend' fails otherwise
2000-07-31 23:41:47 +00:00
#include <net/pfil.h>
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
#include <net/if.h>
Make faith loadable, unloadable, and clonable.
2001-09-25 18:40:52 +00:00
#include <net/if_types.h>
Return the entire if info, rather than just the index number. (at least try) Interface index numbers are an abomination that should go away (at least in that form)
1997-11-05 02:51:32 +00:00
#include <net/if_var.h>
Add the IP_RECVIF socket option, which supplies a packet's incoming interface using a sockaddr_dl. Fix the other packet-information socket options (SO_TIMESTAMP, IP_RECVDSTADDR) to work for multicast UDP and raw sockets as well. (They previously only worked for unicast UDP).
1996-11-11 04:56:32 +00:00
#include <net/if_dl.h>
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
#include <net/route.h>
Make networking domains drop-ins, through the magic of GNU ld. (Some day, there may even be LKMs.) Also, change the internal name of `unixdomain' to `localdomain' since AF_LOCAL is now the preferred name of this family. Declare netisr correctly and in the right place.
1995-05-11 00:13:26 +00:00
#include <net/netisr.h>
Refactor / restructure the RSS code into generic, IPv4 and IPv6 specific bits. The motivation here is to eventually teach netisr and potentially other networking subsystems a bit more about how RSS work queues / buckets are configured so things have a hope of auto-configuring in the future. * net/rss_config.[ch] takes care of the generic bits for doing configuration, hash function selection, etc; * topelitz.[ch] is now in net/ rather than netinet/; * (and would be in libkern if it didn't directly include RSS_KEYSIZE; that's a later thing to fix up.) * netinet/in_rss.[ch] now just contains the IPv4 specific methods; * and netinet/in6_rss.[ch] now just contains the IPv6 specific methods. This should have no functional impact on anyone currently using the RSS support. Differential Revision: D1383 Reviewed by: gnn, jfv (intel driver bits)
2015-01-18 18:06:40 +00:00
#include <net/rss_config.h>
Rather than using hidden includes (with cicular dependencies), directly include only the header files needed. This reduces the unneeded spamming of various headers into lots of files. For now, this leaves us with very few modules including vnet.h and thus needing to depend on opt_route.h. Reviewed by: brooks, gnn, des, zec, imp Sponsored by: The FreeBSD Foundation
2008-12-02 21:37:28 +00:00
#include <net/vnet.h>
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
#include <netinet/in.h>
Implement the ip, tcp, and udp DTrace providers. The probe definitions use dynamic translation so that their arguments match the definitions for these providers in Solaris and illumos. Thus, existing scripts for these providers should work unmodified on FreeBSD. Tested by: gnn, hiren MFC after: 1 month
2013-08-25 21:54:41 +00:00
#include <netinet/in_kdtrace.h>
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
#include <netinet/in_systm.h>
Add and move declarations to fix all of the warnings from `gcc -Wimplicit' (except in netccitt, netiso and netns) and most of the warnings from `gcc -Wnested-externs'. Fix all the bugs found. There were no serious ones.
1995-03-16 18:17:34 +00:00
#include <netinet/in_var.h>
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
#include <netinet/ip.h>
#include <netinet/in_pcb.h>
#include <netinet/ip_var.h>
Build on Jeff Roberson's linker-set based dynamic per-CPU allocator (DPCPU), as suggested by Peter Wemm, and implement a new per-virtual network stack memory allocator. Modify vnet to use the allocator instead of monolithic global container structures (vinet, ...). This change solves many binary compatibility problems associated with VIMAGE, and restores ELF symbols for virtualized global variables. Each virtualized global variable exists as a "reference copy", and also once per virtual network stack. Virtualized global variables are tagged at compile-time, placing the in a special linker set, which is loaded into a contiguous region of kernel memory. Virtualized global variables in the base kernel are linked as normal, but those in modules are copied and relocated to a reserved portion of the kernel's vnet region with the help of a the kernel linker. Virtualized global variables exist in per-vnet memory set up when the network stack instance is created, and are initialized statically from the reference copy. Run-time access occurs via an accessor macro, which converts from the current vnet and requested symbol to a per-vnet address. When "options VIMAGE" is not compiled into the kernel, normal global ELF symbols will be used instead and indirection is avoided. This change restores static initialization for network stack global variables, restores support for non-global symbols and types, eliminates the need for many subsystem constructors, eliminates large per-subsystem structures that caused many binary compatibility issues both for monitoring applications (netstat) and kernel modules, removes the per-function INIT_VNET_*() macros throughout the stack, eliminates the need for vnet_symmap ksym(2) munging, and eliminates duplicate definitions of virtualized globals under VIMAGE_GLOBALS. Bump __FreeBSD_version and update UPDATING. Portions submitted by: bz Reviewed by: bz, zec Discussed with: gnn, jamie, jeff, jhb, julian, sam Suggested by: peter Approved by: re (kensmith)
2009-07-14 22:48:30 +00:00
#include <netinet/ip_fw.h>
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
#include <netinet/ip_icmp.h>
Consolidate all IP Options handling functions into ip_options.[ch] and include ip_options.h into all files making use of IP Options functions. From ip_input.c rev 1.306: ip_dooptions(struct mbuf *m, int pass) save_rte(m, option, dst) ip_srcroute(m0) ip_stripoptions(m, mopt) From ip_output.c rev 1.249: ip_insertoptions(m, opt, phlen) ip_optcopy(ip, jp) ip_pcbopts(struct inpcb *inp, int optname, struct mbuf *m) No functional changes in this commit. Discussed with: rwatson Sponsored by: TCP/IP Optimization Fundraise 2005
2005-11-18 20:12:40 +00:00
#include <netinet/ip_options.h>
All three files: make COMPAT_IPFW==0 case work again. ip_input.c: - delete some dusty code - _IP_VHL - use fast inline header checksum when possible
1996-10-07 19:21:46 +00:00
#include <machine/in_cksum.h>
Add CARP (Common Address Redundancy Protocol), which allows multiple hosts to share an IP address, providing high availability and load balancing. Original work on CARP done by Michael Shalayeff, with many additions by Marco Pfatschbacher and Ryan McBride. FreeBSD port done solely by Max Laier. Patch by: mlaier Obtained from: OpenBSD (mickey, mcbride)
2005-02-22 13:04:05 +00:00
#include <netinet/ip_carp.h>
Update the IPv4 input path to handle reassembled frames and incoming frames with no RSS hash. When doing RSS: * Create a new IPv4 netisr which expects the frames to have been verified; it just directly dispatches to the IPv4 input path. * Once IPv4 reassembly is done, re-calculate the RSS hash with the new IP and L3 header; then reinject it as appropriate. * Update the IPv4 netisr to be a CPU affinity netisr with the RSS hash function (rss_soft_m2cpuid) - this will do a software hash if the hardware doesn't provide one. NICs that don't implement hardware RSS hashing will now benefit from RSS distribution - it'll inject into the correct destination netisr. Note: the netisr distribution doesn't work out of the box - netisr doesn't query RSS for how many CPUs and the affinity setup. Yes, netisr likely shouldn't really be doing CPU stuff anymore and should be "some kind of 'thing' that is a workqueue that may or may not have any CPU affinity"; that's for a later commit. Differential Revision: https://reviews.freebsd.org/D527 Reviewed by: grehan
2014-09-09 04:18:20 +00:00
#include <netinet/in_rss.h>
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
Merge projects/ipsec into head/. Small summary ------------- o Almost all IPsec releated code was moved into sys/netipsec. o New kernel modules added: ipsec.ko and tcpmd5.ko. New kernel option IPSEC_SUPPORT added. It enables support for loading and unloading of ipsec.ko and tcpmd5.ko kernel modules. o IPSEC_NAT_T option was removed. Now NAT-T support is enabled by default. The UDP_ENCAP_ESPINUDP_NON_IKE encapsulation type support was removed. Added TCP/UDP checksum handling for inbound packets that were decapsulated by transport mode SAs. setkey(8) modified to show run-time NAT-T configuration of SA. o New network pseudo interface if_ipsec(4) added. For now it is build as part of ipsec.ko module (or with IPSEC kernel). It implements IPsec virtual tunnels to create route-based VPNs. o The network stack now invokes IPsec functions using special methods. The only one header file <netipsec/ipsec_support.h> should be included to declare all the needed things to work with IPsec. o All IPsec protocols handlers (ESP/AH/IPCOMP protosw) were removed. Now these protocols are handled directly via IPsec methods. o TCP_SIGNATURE support was reworked to be more close to RFC. o PF_KEY SADB was reworked: - now all security associations stored in the single SPI namespace, and all SAs MUST have unique SPI. - several hash tables added to speed up lookups in SADB. - SADB now uses rmlock to protect access, and concurrent threads can do SA lookups in the same time. - many PF_KEY message handlers were reworked to reflect changes in SADB. - SADB_UPDATE message was extended to support new PF_KEY headers: SADB_X_EXT_NEW_ADDRESS_SRC and SADB_X_EXT_NEW_ADDRESS_DST. They can be used by IKE daemon to change SA addresses. o ipsecrequest and secpolicy structures were cardinally changed to avoid locking protection for ipsecrequest. Now we support only limited number (4) of bundled SAs, but they are supported for both INET and INET6. o INPCB security policy cache was introduced. Each PCB now caches used security policies to avoid SP lookup for each packet. o For inbound security policies added the mode, when the kernel does check for full history of applied IPsec transforms. o References counting rules for security policies and security associations were changed. The proper SA locking added into xform code. o xform code was also changed. Now it is possible to unregister xforms. tdb_xxx structures were changed and renamed to reflect changes in SADB/SPDB, and changed rules for locking and refcounting. Reviewed by: gnn, wblock Obtained from: Yandex LLC Relnotes: yes Sponsored by: Yandex LLC Differential Revision: https://reviews.freebsd.org/D9352
2017-02-06 08:49:57 +00:00
#include <netipsec/ipsec_support.h>
Initial get-the-easy-case-working upgrade of the multicast code to something more recent than the ancient 1.2 release contained in 4.4. This code has the following advantages as compared to previous versions (culled from the README file for the SunOS release): - True multicast delivery - Configurable rate-limiting of forwarded multicast traffic on each physical interface or tunnel, using a token-bucket limiter. - Simplistic classification of packets for prioritized dropping. - Administrative scoping of multicast address ranges. - Faster detection of hosts leaving groups. - Support for multicast traceroute (code not yet available). - Support for RSVP, the Resource Reservation Protocol. What still needs to be done: - The multicast forwarder needs testing. - The multicast routing daemon needs to be ported. - Network interface drivers need to have the `#ifdef MULTICAST' goop ripped out of them. - The IGMP code should probably be bogon-tested. Some notes about the porting process: In some cases, the Berkeley people decided to incorporate functionality from later releases of the multicast code, but then had to do things differently. As a result, if you look at Deering's patches, and then look at our code, it is not always obvious whether the patch even applies. Let the reader beware. I ran ip_mroute.c through several passes of `unifdef' to get rid of useless grot, and to permanently enable the RSVP support, which we will include as standard. Ported by: Garrett Wollman Submitted by: Steve Deering and Ajit Thyagarajan (among others)
1994-09-06 22:42:31 +00:00
#include <sys/socketvar.h>
Clean up various compiler warnings. Most (if not all) were benign Reviewed by: bde
1996-05-08 04:29:08 +00:00
Complete break-out of sys/sys/mac.h into sys/security/mac/mac_framework.h begun with a repo-copy of mac.h to mac_framework.h. sys/mac.h now contains the userspace and user<->kernel API and definitions, with all in-kernel interfaces moved to mac_framework.h, which is now included across most of the kernel instead. This change is the first step in a larger cleanup and sweep of MAC Framework interfaces in the kernel, and will not be MFC'd. Obtained from: TrustedBSD Project Sponsored by: SPARTA
2006-10-22 11:52:19 +00:00
#include <security/mac/mac_framework.h>
Move CTASSERT from header file to source file, per implementation note now in the CTASSERT man page. Submitted by: Ryan Stone
2008-09-26 18:30:11 +00:00
#ifdef CTASSERT
CTASSERT(sizeof(struct ip) == 20);
#endif
Move all code related to IP fragment reassembly to ip_reass.c. Some function names have changed and comments are reformatted or added, but there is no functional change. Claim copyright for me and Adrian. Sponsored by: Nginx, Inc.
2015-04-10 06:02:37 +00:00
/* IP reassembly functions are defined in ip_reass.c. */
Attempt to fix build after 281351 by defining full prototype for the functions that were moved to ip_reass.c.
2015-04-11 01:06:59 +00:00
extern void ipreass_init(void);
extern void ipreass_drain(void);
extern void ipreass_slowtimo(void);
Move all code related to IP fragment reassembly to ip_reass.c. Some function names have changed and comments are reformatted or added, but there is no functional change. Claim copyright for me and Adrian. Sponsored by: Nginx, Inc.
2015-04-10 06:02:37 +00:00
#ifdef VIMAGE
Attempt to fix build after 281351 by defining full prototype for the functions that were moved to ip_reass.c.
2015-04-11 01:06:59 +00:00
extern void ipreass_destroy(void);
Move all code related to IP fragment reassembly to ip_reass.c. Some function names have changed and comments are reformatted or added, but there is no functional change. Claim copyright for me and Adrian. Sponsored by: Nginx, Inc.
2015-04-10 06:02:37 +00:00
#endif
Convert in_ifaddr_lock and in6_ifaddr_lock to rmlock. Both are used to protect access to IP addresses lists and they can be acquired for reading several times per packet. To reduce lock contention it is better to use rmlock here. Reviewed by: gnn (previous version) Obtained from: Yandex LLC Sponsored by: Yandex LLC Differential Revision: https://reviews.freebsd.org/D3149
2015-07-29 08:12:05 +00:00
struct rmlock in_ifaddr_lock;
RM_SYSINIT(in_ifaddr_lock, &in_ifaddr_lock, "in_ifaddr_lock");
Initial get-the-easy-case-working upgrade of the multicast code to something more recent than the ancient 1.2 release contained in 4.4. This code has the following advantages as compared to previous versions (culled from the README file for the SunOS release): - True multicast delivery - Configurable rate-limiting of forwarded multicast traffic on each physical interface or tunnel, using a token-bucket limiter. - Simplistic classification of packets for prioritized dropping. - Administrative scoping of multicast address ranges. - Faster detection of hosts leaving groups. - Support for multicast traceroute (code not yet available). - Support for RSVP, the Resource Reservation Protocol. What still needs to be done: - The multicast forwarder needs testing. - The multicast routing daemon needs to be ported. - Network interface drivers need to have the `#ifdef MULTICAST' goop ripped out of them. - The IGMP code should probably be bogon-tested. Some notes about the porting process: In some cases, the Berkeley people decided to incorporate functionality from later releases of the multicast code, but then had to do things differently. As a result, if you look at Deering's patches, and then look at our code, it is not always obvious whether the patch even applies. Let the reader beware. I ran ip_mroute.c through several passes of `unifdef' to get rid of useless grot, and to permanently enable the RSVP support, which we will include as standard. Ported by: Garrett Wollman Submitted by: Steve Deering and Ajit Thyagarajan (among others)
1994-09-06 22:42:31 +00:00
MFP4: @176978-176982, 176984, 176990-176994, 177441 "Whitspace" churn after the VIMAGE/VNET whirls. Remove the need for some "init" functions within the network stack, like pim6_init(), icmp_init() or significantly shorten others like ip6_init() and nd6_init(), using static initialization again where possible and formerly missed. Move (most) variables back to the place they used to be before the container structs and VIMAGE_GLOABLS (before r185088) and try to reduce the diff to stable/7 and earlier as good as possible, to help out-of-tree consumers to update from 6.x or 7.x to 8 or 9. This also removes some header file pollution for putatively static global variables. Revert VIMAGE specific changes in ipfilter::ip_auth.c, that are no longer needed. Reviewed by: jhb Discussed with: rwatson Sponsored by: The FreeBSD Foundation Sponsored by: CK Software GmbH MFC after: 6 days
2010-04-29 11:52:42 +00:00
VNET_DEFINE(int, rsvp_on);
VNET_DEFINE(int, ipforwarding);
Remove SYSCTL_VNET_* macros, and simply put CTLFLAG_VNET where needed. Sponsored by: Nginx, Inc.
2014-11-07 09:39:05 +00:00
SYSCTL_INT(_net_inet_ip, IPCTL_FORWARDING, forwarding, CTLFLAG_VNET | CTLFLAG_RW,
Build on Jeff Roberson's linker-set based dynamic per-CPU allocator (DPCPU), as suggested by Peter Wemm, and implement a new per-virtual network stack memory allocator. Modify vnet to use the allocator instead of monolithic global container structures (vinet, ...). This change solves many binary compatibility problems associated with VIMAGE, and restores ELF symbols for virtualized global variables. Each virtualized global variable exists as a "reference copy", and also once per virtual network stack. Virtualized global variables are tagged at compile-time, placing the in a special linker set, which is loaded into a contiguous region of kernel memory. Virtualized global variables in the base kernel are linked as normal, but those in modules are copied and relocated to a reserved portion of the kernel's vnet region with the help of a the kernel linker. Virtualized global variables exist in per-vnet memory set up when the network stack instance is created, and are initialized statically from the reference copy. Run-time access occurs via an accessor macro, which converts from the current vnet and requested symbol to a per-vnet address. When "options VIMAGE" is not compiled into the kernel, normal global ELF symbols will be used instead and indirection is avoided. This change restores static initialization for network stack global variables, restores support for non-global symbols and types, eliminates the need for many subsystem constructors, eliminates large per-subsystem structures that caused many binary compatibility issues both for monitoring applications (netstat) and kernel modules, removes the per-function INIT_VNET_*() macros throughout the stack, eliminates the need for vnet_symmap ksym(2) munging, and eliminates duplicate definitions of virtualized globals under VIMAGE_GLOBALS. Bump __FreeBSD_version and update UPDATING. Portions submitted by: bz Reviewed by: bz, zec Discussed with: gnn, jamie, jeff, jhb, julian, sam Suggested by: peter Approved by: re (kensmith)
2009-07-14 22:48:30 +00:00
&VNET_NAME(ipforwarding), 0,
Step 1.5 of importing the network stack virtualization infrastructure from the vimage project, as per plan established at devsummit 08/08: http://wiki.freebsd.org/Image/Notes200808DevSummit Introduce INIT_VNET_*() initializer macros, VNET_FOREACH() iterator macros, and CURVNET_SET() context setting macros, all currently resolving to NOPs. Prepare for virtualization of selected SYSCTL objects by introducing a family of SYSCTL_V_*() macros, currently resolving to their global counterparts, i.e. SYSCTL_V_INT() == SYSCTL_INT(). Move selected #defines from sys/sys/vimage.h to newly introduced header files specific to virtualized subsystems (sys/net/vnet.h, sys/netinet/vinet.h etc.). All the changes are verified to have zero functional impact at this point in time by doing MD5 comparision between pre- and post-change object files(*). (*) netipsec/keysock.c did not validate depending on compile time options. Implemented by: julian, bz, brooks, zec Reviewed by: julian, bz, brooks, kris, rwatson, ... Approved by: julian (mentor) Obtained from: //depot/projects/vimage-commit2/... X-MFC after: never Sponsored by: NLnet Foundation, The FreeBSD Foundation
2008-10-02 15:37:58 +00:00
"Enable IP forwarding between interfaces");
New style sysctl & staticize alot of stuff.
1995-11-14 20:34:56 +00:00
After some off-list discussion, revert a number of changes to the DPCPU_DEFINE and VNET_DEFINE macros, as these cause problems for various people working on the affected files. A better long-term solution is still being considered. This reversal may give some modules empty set_pcpu or set_vnet sections, but these are harmless. Changes reverted: ------------------------------------------------------------------------ r215318 | dim | 2010-11-14 21:40:55 +0100 (Sun, 14 Nov 2010) | 4 lines Instead of unconditionally emitting .globl's for the __start_set_xxx and __stop_set_xxx symbols, only emit them when the set_vnet or set_pcpu sections are actually defined. ------------------------------------------------------------------------ r215317 | dim | 2010-11-14 21:38:11 +0100 (Sun, 14 Nov 2010) | 3 lines Apply the STATIC_VNET_DEFINE and STATIC_DPCPU_DEFINE macros throughout the tree. ------------------------------------------------------------------------ r215316 | dim | 2010-11-14 21:23:02 +0100 (Sun, 14 Nov 2010) | 2 lines Add macros to define static instances of VNET_DEFINE and DPCPU_DEFINE.
2010-11-22 19:32:54 +00:00
static VNET_DEFINE(int, ipsendredirects) = 1; /* XXX */
MFP4: @176978-176982, 176984, 176990-176994, 177441 "Whitspace" churn after the VIMAGE/VNET whirls. Remove the need for some "init" functions within the network stack, like pim6_init(), icmp_init() or significantly shorten others like ip6_init() and nd6_init(), using static initialization again where possible and formerly missed. Move (most) variables back to the place they used to be before the container structs and VIMAGE_GLOABLS (before r185088) and try to reduce the diff to stable/7 and earlier as good as possible, to help out-of-tree consumers to update from 6.x or 7.x to 8 or 9. This also removes some header file pollution for putatively static global variables. Revert VIMAGE specific changes in ipfilter::ip_auth.c, that are no longer needed. Reviewed by: jhb Discussed with: rwatson Sponsored by: The FreeBSD Foundation Sponsored by: CK Software GmbH MFC after: 6 days
2010-04-29 11:52:42 +00:00
#define V_ipsendredirects VNET(ipsendredirects)
Remove SYSCTL_VNET_* macros, and simply put CTLFLAG_VNET where needed. Sponsored by: Nginx, Inc.
2014-11-07 09:39:05 +00:00
SYSCTL_INT(_net_inet_ip, IPCTL_SENDREDIRECTS, redirect, CTLFLAG_VNET | CTLFLAG_RW,
Build on Jeff Roberson's linker-set based dynamic per-CPU allocator (DPCPU), as suggested by Peter Wemm, and implement a new per-virtual network stack memory allocator. Modify vnet to use the allocator instead of monolithic global container structures (vinet, ...). This change solves many binary compatibility problems associated with VIMAGE, and restores ELF symbols for virtualized global variables. Each virtualized global variable exists as a "reference copy", and also once per virtual network stack. Virtualized global variables are tagged at compile-time, placing the in a special linker set, which is loaded into a contiguous region of kernel memory. Virtualized global variables in the base kernel are linked as normal, but those in modules are copied and relocated to a reserved portion of the kernel's vnet region with the help of a the kernel linker. Virtualized global variables exist in per-vnet memory set up when the network stack instance is created, and are initialized statically from the reference copy. Run-time access occurs via an accessor macro, which converts from the current vnet and requested symbol to a per-vnet address. When "options VIMAGE" is not compiled into the kernel, normal global ELF symbols will be used instead and indirection is avoided. This change restores static initialization for network stack global variables, restores support for non-global symbols and types, eliminates the need for many subsystem constructors, eliminates large per-subsystem structures that caused many binary compatibility issues both for monitoring applications (netstat) and kernel modules, removes the per-function INIT_VNET_*() macros throughout the stack, eliminates the need for vnet_symmap ksym(2) munging, and eliminates duplicate definitions of virtualized globals under VIMAGE_GLOBALS. Bump __FreeBSD_version and update UPDATING. Portions submitted by: bz Reviewed by: bz, zec Discussed with: gnn, jamie, jeff, jhb, julian, sam Suggested by: peter Approved by: re (kensmith)
2009-07-14 22:48:30 +00:00
&VNET_NAME(ipsendredirects), 0,
Step 1.5 of importing the network stack virtualization infrastructure from the vimage project, as per plan established at devsummit 08/08: http://wiki.freebsd.org/Image/Notes200808DevSummit Introduce INIT_VNET_*() initializer macros, VNET_FOREACH() iterator macros, and CURVNET_SET() context setting macros, all currently resolving to NOPs. Prepare for virtualization of selected SYSCTL objects by introducing a family of SYSCTL_V_*() macros, currently resolving to their global counterparts, i.e. SYSCTL_V_INT() == SYSCTL_INT(). Move selected #defines from sys/sys/vimage.h to newly introduced header files specific to virtualized subsystems (sys/net/vnet.h, sys/netinet/vinet.h etc.). All the changes are verified to have zero functional impact at this point in time by doing MD5 comparision between pre- and post-change object files(*). (*) netipsec/keysock.c did not validate depending on compile time options. Implemented by: julian, bz, brooks, zec Reviewed by: julian, bz, brooks, kris, rwatson, ... Approved by: julian (mentor) Obtained from: //depot/projects/vimage-commit2/... X-MFC after: never Sponsored by: NLnet Foundation, The FreeBSD Foundation
2008-10-02 15:37:58 +00:00
"Enable sending IP redirects");
New style sysctl & staticize alot of stuff.
1995-11-14 20:34:56 +00:00
Disable interface checking when IP forwarding is engaged so that packets addressed to the interface on the other side of the box follow their historical path. Explicitly block packets sent to the loopback network sent from the outside, which is consistent with the behavior of the forwarding path between interfaces as implemented in in_canforward(). Always check the arrival interface when matching the packet destination against the interface broadcast addresses. This bug allowed TCP connections to be made to the broadcast address of an interface on the far side of the system because the M_BCAST flag was not set because the packet was unicast to the interface on the near side. This was broken when the directed broadcast code was removed from revision 1.32. If the directed broadcast code was stil present, the destination would not have been recognized as local until the packet was forwarded to the output interface and ether_output() looped a copy back to ip_input() with M_BCAST set and the receive interface set to the output interface. Optimize the order of the tests. Reviewed by: jlemon
2001-03-04 01:39:19 +00:00
/*
* XXX - Setting ip_checkinterface mostly implements the receive side of
* the Strong ES model described in RFC 1122, but since the routing table
Modify the comments to more closely resemble the English language.
2001-03-05 22:40:27 +00:00
* and transmit implementation do not implement the Strong ES model,
Disable interface checking when IP forwarding is engaged so that packets addressed to the interface on the other side of the box follow their historical path. Explicitly block packets sent to the loopback network sent from the outside, which is consistent with the behavior of the forwarding path between interfaces as implemented in in_canforward(). Always check the arrival interface when matching the packet destination against the interface broadcast addresses. This bug allowed TCP connections to be made to the broadcast address of an interface on the far side of the system because the M_BCAST flag was not set because the packet was unicast to the interface on the near side. This was broken when the directed broadcast code was removed from revision 1.32. If the directed broadcast code was stil present, the destination would not have been recognized as local until the packet was forwarded to the output interface and ether_output() looped a copy back to ip_input() with M_BCAST set and the receive interface set to the output interface. Optimize the order of the tests. Reviewed by: jlemon
2001-03-04 01:39:19 +00:00
* setting this to 1 results in an odd hybrid.
Move the loopback net check closer to the beginning of ip_input() so that it doesn't block packets whose destination address has been translated to the loopback net by ipnat. Add warning comments about the ip_checkinterface feature.
2001-03-05 08:45:05 +00:00
*
Modify the comments to more closely resemble the English language.
2001-03-05 22:40:27 +00:00
* XXX - ip_checkinterface currently must be disabled if you use ipnat
* to translate the destination address to another local interface.
Move the loopback net check closer to the beginning of ip_input() so that it doesn't block packets whose destination address has been translated to the loopback net by ipnat. Add warning comments about the ip_checkinterface feature.
2001-03-05 08:45:05 +00:00
*
* XXX - ip_checkinterface must be disabled if you add IP aliases
* to the loopback interface instead of the interface where the
* packets for those addresses are received.
Disable interface checking when IP forwarding is engaged so that packets addressed to the interface on the other side of the box follow their historical path. Explicitly block packets sent to the loopback network sent from the outside, which is consistent with the behavior of the forwarding path between interfaces as implemented in in_canforward(). Always check the arrival interface when matching the packet destination against the interface broadcast addresses. This bug allowed TCP connections to be made to the broadcast address of an interface on the far side of the system because the M_BCAST flag was not set because the packet was unicast to the interface on the near side. This was broken when the directed broadcast code was removed from revision 1.32. If the directed broadcast code was stil present, the destination would not have been recognized as local until the packet was forwarded to the output interface and ether_output() looped a copy back to ip_input() with M_BCAST set and the receive interface set to the output interface. Optimize the order of the tests. Reviewed by: jlemon
2001-03-04 01:39:19 +00:00
*/
After some off-list discussion, revert a number of changes to the DPCPU_DEFINE and VNET_DEFINE macros, as these cause problems for various people working on the affected files. A better long-term solution is still being considered. This reversal may give some modules empty set_pcpu or set_vnet sections, but these are harmless. Changes reverted: ------------------------------------------------------------------------ r215318 | dim | 2010-11-14 21:40:55 +0100 (Sun, 14 Nov 2010) | 4 lines Instead of unconditionally emitting .globl's for the __start_set_xxx and __stop_set_xxx symbols, only emit them when the set_vnet or set_pcpu sections are actually defined. ------------------------------------------------------------------------ r215317 | dim | 2010-11-14 21:38:11 +0100 (Sun, 14 Nov 2010) | 3 lines Apply the STATIC_VNET_DEFINE and STATIC_DPCPU_DEFINE macros throughout the tree. ------------------------------------------------------------------------ r215316 | dim | 2010-11-14 21:23:02 +0100 (Sun, 14 Nov 2010) | 2 lines Add macros to define static instances of VNET_DEFINE and DPCPU_DEFINE.
2010-11-22 19:32:54 +00:00
static VNET_DEFINE(int, ip_checkinterface);
MFP4: @176978-176982, 176984, 176990-176994, 177441 "Whitspace" churn after the VIMAGE/VNET whirls. Remove the need for some "init" functions within the network stack, like pim6_init(), icmp_init() or significantly shorten others like ip6_init() and nd6_init(), using static initialization again where possible and formerly missed. Move (most) variables back to the place they used to be before the container structs and VIMAGE_GLOABLS (before r185088) and try to reduce the diff to stable/7 and earlier as good as possible, to help out-of-tree consumers to update from 6.x or 7.x to 8 or 9. This also removes some header file pollution for putatively static global variables. Revert VIMAGE specific changes in ipfilter::ip_auth.c, that are no longer needed. Reviewed by: jhb Discussed with: rwatson Sponsored by: The FreeBSD Foundation Sponsored by: CK Software GmbH MFC after: 6 days
2010-04-29 11:52:42 +00:00
#define V_ip_checkinterface VNET(ip_checkinterface)
Remove SYSCTL_VNET_* macros, and simply put CTLFLAG_VNET where needed. Sponsored by: Nginx, Inc.
2014-11-07 09:39:05 +00:00
SYSCTL_INT(_net_inet_ip, OID_AUTO, check_interface, CTLFLAG_VNET | CTLFLAG_RW,
Build on Jeff Roberson's linker-set based dynamic per-CPU allocator (DPCPU), as suggested by Peter Wemm, and implement a new per-virtual network stack memory allocator. Modify vnet to use the allocator instead of monolithic global container structures (vinet, ...). This change solves many binary compatibility problems associated with VIMAGE, and restores ELF symbols for virtualized global variables. Each virtualized global variable exists as a "reference copy", and also once per virtual network stack. Virtualized global variables are tagged at compile-time, placing the in a special linker set, which is loaded into a contiguous region of kernel memory. Virtualized global variables in the base kernel are linked as normal, but those in modules are copied and relocated to a reserved portion of the kernel's vnet region with the help of a the kernel linker. Virtualized global variables exist in per-vnet memory set up when the network stack instance is created, and are initialized statically from the reference copy. Run-time access occurs via an accessor macro, which converts from the current vnet and requested symbol to a per-vnet address. When "options VIMAGE" is not compiled into the kernel, normal global ELF symbols will be used instead and indirection is avoided. This change restores static initialization for network stack global variables, restores support for non-global symbols and types, eliminates the need for many subsystem constructors, eliminates large per-subsystem structures that caused many binary compatibility issues both for monitoring applications (netstat) and kernel modules, removes the per-function INIT_VNET_*() macros throughout the stack, eliminates the need for vnet_symmap ksym(2) munging, and eliminates duplicate definitions of virtualized globals under VIMAGE_GLOBALS. Bump __FreeBSD_version and update UPDATING. Portions submitted by: bz Reviewed by: bz, zec Discussed with: gnn, jamie, jeff, jhb, julian, sam Suggested by: peter Approved by: re (kensmith)
2009-07-14 22:48:30 +00:00
&VNET_NAME(ip_checkinterface), 0,
Step 1.5 of importing the network stack virtualization infrastructure from the vimage project, as per plan established at devsummit 08/08: http://wiki.freebsd.org/Image/Notes200808DevSummit Introduce INIT_VNET_*() initializer macros, VNET_FOREACH() iterator macros, and CURVNET_SET() context setting macros, all currently resolving to NOPs. Prepare for virtualization of selected SYSCTL objects by introducing a family of SYSCTL_V_*() macros, currently resolving to their global counterparts, i.e. SYSCTL_V_INT() == SYSCTL_INT(). Move selected #defines from sys/sys/vimage.h to newly introduced header files specific to virtualized subsystems (sys/net/vnet.h, sys/netinet/vinet.h etc.). All the changes are verified to have zero functional impact at this point in time by doing MD5 comparision between pre- and post-change object files(*). (*) netipsec/keysock.c did not validate depending on compile time options. Implemented by: julian, bz, brooks, zec Reviewed by: julian, bz, brooks, kris, rwatson, ... Approved by: julian (mentor) Obtained from: //depot/projects/vimage-commit2/... X-MFC after: never Sponsored by: NLnet Foundation, The FreeBSD Foundation
2008-10-02 15:37:58 +00:00
"Verify packet arrives on correct interface");
Add a new sysctl net.inet.ip.check_interface, which will verify that an incoming packet arrivees on an interface that has an address matching the packet's address. This is turned on by default.
2001-03-02 20:54:03 +00:00
Virtualize the pfil hooks so that different jails may chose different packet filters. ALso allows ipfw to be enabled on on ejail and disabled on another. In 8.0 it's a global setting. Sitting aroung in tree waiting to commit for: 2 months MFC after: 2 months
2009-10-11 05:59:43 +00:00
VNET_DEFINE(struct pfil_head, inet_pfil_hook); /* Packet filter hooks */
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
Reimplement the netisr framework in order to support parallel netisr threads: - Support up to one netisr thread per CPU, each processings its own workstream, or set of per-protocol queues. Threads may be bound to specific CPUs, or allowed to migrate, based on a global policy. In the future it would be desirable to support topology-centric policies, such as "one netisr per package". - Allow each protocol to advertise an ordering policy, which can currently be one of: NETISR_POLICY_SOURCE: packets must maintain ordering with respect to an implicit or explicit source (such as an interface or socket). NETISR_POLICY_FLOW: make use of mbuf flow identifiers to place work, as well as allowing protocols to provide a flow generation function for mbufs without flow identifers (m2flow). Falls back on NETISR_POLICY_SOURCE if now flow ID is available. NETISR_POLICY_CPU: allow protocols to inspect and assign a CPU for each packet handled by netisr (m2cpuid). - Provide utility functions for querying the number of workstreams being used, as well as a mapping function from workstream to CPU ID, which protocols may use in work placement decisions. - Add explicit interfaces to get and set per-protocol queue limits, and get and clear drop counters, which query data or apply changes across all workstreams. - Add a more extensible netisr registration interface, in which protocols declare 'struct netisr_handler' structures for each registered NETISR_ type. These include name, handler function, optional mbuf to flow ID function, optional mbuf to CPU ID function, queue limit, and ordering policy. Padding is present to allow these to be expanded in the future. If no queue limit is declared, then a default is used. - Queue limits are now per-workstream, and raised from the previous IFQ_MAXLEN default of 50 to 256. - All protocols are updated to use the new registration interface, and with the exception of netnatm, default queue limits. Most protocols register as NETISR_POLICY_SOURCE, except IPv4 and IPv6, which use NETISR_POLICY_FLOW, and will therefore take advantage of driver- generated flow IDs if present. - Formalize a non-packet based interface between interface polling and the netisr, rather than having polling pretend to be two protocols. Provide two explicit hooks in the netisr worker for start and end events for runs: netisr_poll() and netisr_pollmore(), as well as a function, netisr_sched_poll(), to allow the polling code to schedule netisr execution. DEVICE_POLLING still embeds single-netisr assumptions in its implementation, so for now if it is compiled into the kernel, a single and un-bound netisr thread is enforced regardless of tunable configuration. In the default configuration, the new netisr implementation maintains the same basic assumptions as the previous implementation: a single, un-bound worker thread processes all deferred work, and direct dispatch is enabled by default wherever possible. Performance measurement shows a marginal performance improvement over the old implementation due to the use of batched dequeue. An rmlock is used to synchronize use and registration/unregistration using the framework; currently, synchronized use is disabled (replicating current netisr policy) due to a measurable 3%-6% hit in ping-pong micro-benchmarking. It will be enabled once further rmlock optimization has taken place. However, in practice, netisrs are rarely registered or unregistered at runtime. A new man page for netisr will follow, but since one doesn't currently exist, it hasn't been updated. This change is not appropriate for MFC, although the polling shutdown handler should be merged to 7-STABLE. Bump __FreeBSD_version. Reviewed by: bz
2009-06-01 10:41:38 +00:00
static struct netisr_handler ip_nh = {
.nh_name = "ip",
.nh_handler = ip_input,
.nh_proto = NETISR_IP,
Update the IPv4 input path to handle reassembled frames and incoming frames with no RSS hash. When doing RSS: * Create a new IPv4 netisr which expects the frames to have been verified; it just directly dispatches to the IPv4 input path. * Once IPv4 reassembly is done, re-calculate the RSS hash with the new IP and L3 header; then reinject it as appropriate. * Update the IPv4 netisr to be a CPU affinity netisr with the RSS hash function (rss_soft_m2cpuid) - this will do a software hash if the hardware doesn't provide one. NICs that don't implement hardware RSS hashing will now benefit from RSS distribution - it'll inject into the correct destination netisr. Note: the netisr distribution doesn't work out of the box - netisr doesn't query RSS for how many CPUs and the affinity setup. Yes, netisr likely shouldn't really be doing CPU stuff anymore and should be "some kind of 'thing' that is a workqueue that may or may not have any CPU affinity"; that's for a later commit. Differential Revision: https://reviews.freebsd.org/D527 Reviewed by: grehan
2014-09-09 04:18:20 +00:00
#ifdef RSS
Rename rss_soft_m2cpuid() -> rss_soft_m2cpuid_v4() in preparation for an IPv6 version to show up. Submitted by: Tiwei Bie <btw@mail.ustc.edu.cn> Differential Revision: https://reviews.freebsd.org/D3504
2015-08-29 06:58:30 +00:00
.nh_m2cpuid = rss_soft_m2cpuid_v4,
Update the IPv4 input path to handle reassembled frames and incoming frames with no RSS hash. When doing RSS: * Create a new IPv4 netisr which expects the frames to have been verified; it just directly dispatches to the IPv4 input path. * Once IPv4 reassembly is done, re-calculate the RSS hash with the new IP and L3 header; then reinject it as appropriate. * Update the IPv4 netisr to be a CPU affinity netisr with the RSS hash function (rss_soft_m2cpuid) - this will do a software hash if the hardware doesn't provide one. NICs that don't implement hardware RSS hashing will now benefit from RSS distribution - it'll inject into the correct destination netisr. Note: the netisr distribution doesn't work out of the box - netisr doesn't query RSS for how many CPUs and the affinity setup. Yes, netisr likely shouldn't really be doing CPU stuff anymore and should be "some kind of 'thing' that is a workqueue that may or may not have any CPU affinity"; that's for a later commit. Differential Revision: https://reviews.freebsd.org/D527 Reviewed by: grehan
2014-09-09 04:18:20 +00:00
.nh_policy = NETISR_POLICY_CPU,
.nh_dispatch = NETISR_DISPATCH_HYBRID,
#else
Reimplement the netisr framework in order to support parallel netisr threads: - Support up to one netisr thread per CPU, each processings its own workstream, or set of per-protocol queues. Threads may be bound to specific CPUs, or allowed to migrate, based on a global policy. In the future it would be desirable to support topology-centric policies, such as "one netisr per package". - Allow each protocol to advertise an ordering policy, which can currently be one of: NETISR_POLICY_SOURCE: packets must maintain ordering with respect to an implicit or explicit source (such as an interface or socket). NETISR_POLICY_FLOW: make use of mbuf flow identifiers to place work, as well as allowing protocols to provide a flow generation function for mbufs without flow identifers (m2flow). Falls back on NETISR_POLICY_SOURCE if now flow ID is available. NETISR_POLICY_CPU: allow protocols to inspect and assign a CPU for each packet handled by netisr (m2cpuid). - Provide utility functions for querying the number of workstreams being used, as well as a mapping function from workstream to CPU ID, which protocols may use in work placement decisions. - Add explicit interfaces to get and set per-protocol queue limits, and get and clear drop counters, which query data or apply changes across all workstreams. - Add a more extensible netisr registration interface, in which protocols declare 'struct netisr_handler' structures for each registered NETISR_ type. These include name, handler function, optional mbuf to flow ID function, optional mbuf to CPU ID function, queue limit, and ordering policy. Padding is present to allow these to be expanded in the future. If no queue limit is declared, then a default is used. - Queue limits are now per-workstream, and raised from the previous IFQ_MAXLEN default of 50 to 256. - All protocols are updated to use the new registration interface, and with the exception of netnatm, default queue limits. Most protocols register as NETISR_POLICY_SOURCE, except IPv4 and IPv6, which use NETISR_POLICY_FLOW, and will therefore take advantage of driver- generated flow IDs if present. - Formalize a non-packet based interface between interface polling and the netisr, rather than having polling pretend to be two protocols. Provide two explicit hooks in the netisr worker for start and end events for runs: netisr_poll() and netisr_pollmore(), as well as a function, netisr_sched_poll(), to allow the polling code to schedule netisr execution. DEVICE_POLLING still embeds single-netisr assumptions in its implementation, so for now if it is compiled into the kernel, a single and un-bound netisr thread is enforced regardless of tunable configuration. In the default configuration, the new netisr implementation maintains the same basic assumptions as the previous implementation: a single, un-bound worker thread processes all deferred work, and direct dispatch is enabled by default wherever possible. Performance measurement shows a marginal performance improvement over the old implementation due to the use of batched dequeue. An rmlock is used to synchronize use and registration/unregistration using the framework; currently, synchronized use is disabled (replicating current netisr policy) due to a measurable 3%-6% hit in ping-pong micro-benchmarking. It will be enabled once further rmlock optimization has taken place. However, in practice, netisrs are rarely registered or unregistered at runtime. A new man page for netisr will follow, but since one doesn't currently exist, it hasn't been updated. This change is not appropriate for MFC, although the polling shutdown handler should be merged to 7-STABLE. Bump __FreeBSD_version. Reviewed by: bz
2009-06-01 10:41:38 +00:00
.nh_policy = NETISR_POLICY_FLOW,
Update the IPv4 input path to handle reassembled frames and incoming frames with no RSS hash. When doing RSS: * Create a new IPv4 netisr which expects the frames to have been verified; it just directly dispatches to the IPv4 input path. * Once IPv4 reassembly is done, re-calculate the RSS hash with the new IP and L3 header; then reinject it as appropriate. * Update the IPv4 netisr to be a CPU affinity netisr with the RSS hash function (rss_soft_m2cpuid) - this will do a software hash if the hardware doesn't provide one. NICs that don't implement hardware RSS hashing will now benefit from RSS distribution - it'll inject into the correct destination netisr. Note: the netisr distribution doesn't work out of the box - netisr doesn't query RSS for how many CPUs and the affinity setup. Yes, netisr likely shouldn't really be doing CPU stuff anymore and should be "some kind of 'thing' that is a workqueue that may or may not have any CPU affinity"; that's for a later commit. Differential Revision: https://reviews.freebsd.org/D527 Reviewed by: grehan
2014-09-09 04:18:20 +00:00
#endif
Reimplement the netisr framework in order to support parallel netisr threads: - Support up to one netisr thread per CPU, each processings its own workstream, or set of per-protocol queues. Threads may be bound to specific CPUs, or allowed to migrate, based on a global policy. In the future it would be desirable to support topology-centric policies, such as "one netisr per package". - Allow each protocol to advertise an ordering policy, which can currently be one of: NETISR_POLICY_SOURCE: packets must maintain ordering with respect to an implicit or explicit source (such as an interface or socket). NETISR_POLICY_FLOW: make use of mbuf flow identifiers to place work, as well as allowing protocols to provide a flow generation function for mbufs without flow identifers (m2flow). Falls back on NETISR_POLICY_SOURCE if now flow ID is available. NETISR_POLICY_CPU: allow protocols to inspect and assign a CPU for each packet handled by netisr (m2cpuid). - Provide utility functions for querying the number of workstreams being used, as well as a mapping function from workstream to CPU ID, which protocols may use in work placement decisions. - Add explicit interfaces to get and set per-protocol queue limits, and get and clear drop counters, which query data or apply changes across all workstreams. - Add a more extensible netisr registration interface, in which protocols declare 'struct netisr_handler' structures for each registered NETISR_ type. These include name, handler function, optional mbuf to flow ID function, optional mbuf to CPU ID function, queue limit, and ordering policy. Padding is present to allow these to be expanded in the future. If no queue limit is declared, then a default is used. - Queue limits are now per-workstream, and raised from the previous IFQ_MAXLEN default of 50 to 256. - All protocols are updated to use the new registration interface, and with the exception of netnatm, default queue limits. Most protocols register as NETISR_POLICY_SOURCE, except IPv4 and IPv6, which use NETISR_POLICY_FLOW, and will therefore take advantage of driver- generated flow IDs if present. - Formalize a non-packet based interface between interface polling and the netisr, rather than having polling pretend to be two protocols. Provide two explicit hooks in the netisr worker for start and end events for runs: netisr_poll() and netisr_pollmore(), as well as a function, netisr_sched_poll(), to allow the polling code to schedule netisr execution. DEVICE_POLLING still embeds single-netisr assumptions in its implementation, so for now if it is compiled into the kernel, a single and un-bound netisr thread is enforced regardless of tunable configuration. In the default configuration, the new netisr implementation maintains the same basic assumptions as the previous implementation: a single, un-bound worker thread processes all deferred work, and direct dispatch is enabled by default wherever possible. Performance measurement shows a marginal performance improvement over the old implementation due to the use of batched dequeue. An rmlock is used to synchronize use and registration/unregistration using the framework; currently, synchronized use is disabled (replicating current netisr policy) due to a measurable 3%-6% hit in ping-pong micro-benchmarking. It will be enabled once further rmlock optimization has taken place. However, in practice, netisrs are rarely registered or unregistered at runtime. A new man page for netisr will follow, but since one doesn't currently exist, it hasn't been updated. This change is not appropriate for MFC, although the polling shutdown handler should be merged to 7-STABLE. Bump __FreeBSD_version. Reviewed by: bz
2009-06-01 10:41:38 +00:00
};
Add a hash table that contains the list of internet addresses, and use this in place of the in_ifaddr list when appropriate. This improves performance on hosts which have a large number of IP aliases.
2001-09-29 04:34:11 +00:00
Update the IPv4 input path to handle reassembled frames and incoming frames with no RSS hash. When doing RSS: * Create a new IPv4 netisr which expects the frames to have been verified; it just directly dispatches to the IPv4 input path. * Once IPv4 reassembly is done, re-calculate the RSS hash with the new IP and L3 header; then reinject it as appropriate. * Update the IPv4 netisr to be a CPU affinity netisr with the RSS hash function (rss_soft_m2cpuid) - this will do a software hash if the hardware doesn't provide one. NICs that don't implement hardware RSS hashing will now benefit from RSS distribution - it'll inject into the correct destination netisr. Note: the netisr distribution doesn't work out of the box - netisr doesn't query RSS for how many CPUs and the affinity setup. Yes, netisr likely shouldn't really be doing CPU stuff anymore and should be "some kind of 'thing' that is a workqueue that may or may not have any CPU affinity"; that's for a later commit. Differential Revision: https://reviews.freebsd.org/D527 Reviewed by: grehan
2014-09-09 04:18:20 +00:00
#ifdef RSS
/*
* Directly dispatched frames are currently assumed
* to have a flowid already calculated.
*
* It should likely have something that assert it
* actually has valid flow details.
*/
static struct netisr_handler ip_direct_nh = {
.nh_name = "ip_direct",
.nh_handler = ip_direct_input,
.nh_proto = NETISR_IP_DIRECT,
Replace rss_m2cpuid with rss_soft_m2cpuid_v4 for ip_direct_nh.nh_m2cpuid, because the RSS hash may need to be recalculated. Submitted by: Tiwei Bie <btw@mail.ustc.edu.cn> Differential Revision: https://reviews.freebsd.org/D3564
2015-09-06 20:20:48 +00:00
.nh_m2cpuid = rss_soft_m2cpuid_v4,
Update the IPv4 input path to handle reassembled frames and incoming frames with no RSS hash. When doing RSS: * Create a new IPv4 netisr which expects the frames to have been verified; it just directly dispatches to the IPv4 input path. * Once IPv4 reassembly is done, re-calculate the RSS hash with the new IP and L3 header; then reinject it as appropriate. * Update the IPv4 netisr to be a CPU affinity netisr with the RSS hash function (rss_soft_m2cpuid) - this will do a software hash if the hardware doesn't provide one. NICs that don't implement hardware RSS hashing will now benefit from RSS distribution - it'll inject into the correct destination netisr. Note: the netisr distribution doesn't work out of the box - netisr doesn't query RSS for how many CPUs and the affinity setup. Yes, netisr likely shouldn't really be doing CPU stuff anymore and should be "some kind of 'thing' that is a workqueue that may or may not have any CPU affinity"; that's for a later commit. Differential Revision: https://reviews.freebsd.org/D527 Reviewed by: grehan
2014-09-09 04:18:20 +00:00
.nh_policy = NETISR_POLICY_CPU,
.nh_dispatch = NETISR_DISPATCH_HYBRID,
};
#endif
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
extern struct domain inetdomain;
Patches from Keiichi SHIMA <keiichi@iij.ad.jp> to make ip use the standard protosw structure again. Obtained from: Well, KAME I guess.
2001-09-03 20:03:55 +00:00
extern struct protosw inetsw[];
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
u_char ip_protox[IPPROTO_MAX];
MFP4: @176978-176982, 176984, 176990-176994, 177441 "Whitspace" churn after the VIMAGE/VNET whirls. Remove the need for some "init" functions within the network stack, like pim6_init(), icmp_init() or significantly shorten others like ip6_init() and nd6_init(), using static initialization again where possible and formerly missed. Move (most) variables back to the place they used to be before the container structs and VIMAGE_GLOABLS (before r185088) and try to reduce the diff to stable/7 and earlier as good as possible, to help out-of-tree consumers to update from 6.x or 7.x to 8 or 9. This also removes some header file pollution for putatively static global variables. Revert VIMAGE specific changes in ipfilter::ip_auth.c, that are no longer needed. Reviewed by: jhb Discussed with: rwatson Sponsored by: The FreeBSD Foundation Sponsored by: CK Software GmbH MFC after: 6 days
2010-04-29 11:52:42 +00:00
VNET_DEFINE(struct in_ifaddrhead, in_ifaddrhead); /* first inet address */
VNET_DEFINE(struct in_ifaddrhashhead *, in_ifaddrhashtbl); /* inet addr hash table */
VNET_DEFINE(u_long, in_ifaddrhmask); /* mask for hash table */
Add a hash table that contains the list of internet addresses, and use this in place of the in_ifaddr list when appropriate. This improves performance on hosts which have a large number of IP aliases.
2001-09-29 04:34:11 +00:00
New style sysctl & staticize alot of stuff.
1995-11-14 20:34:56 +00:00
#ifdef IPCTL_DEFMTU
SYSCTL_INT(_net_inet_ip, IPCTL_DEFMTU, mtu, CTLFLAG_RW,
Add sysctl descriptions to many SYSCTL_XXXs PR: kern/11197 Submitted by: Adrian Chadd <adrian@FreeBSD.org> Reviewed by: billf(spelling/style/minor nits) Looked at by: bde(style)
1999-05-03 23:57:32 +00:00
&ip_mtu, 0, "Default MTU");
New style sysctl & staticize alot of stuff.
1995-11-14 20:34:56 +00:00
#endif
Add support for stealth forwarding (forwarding packets without touching their ttl). This can be used - in combination with the proper ipfw incantations - to make a firewall or router invisible to traceroute and other exploration tools. This behaviour is controlled by a sysctl variable (net.inet.ip.stealth) and hidden behind a kernel option (IPSTEALTH). Reviewed by: eivind, bde
1999-02-22 18:19:57 +00:00
#ifdef IPSTEALTH
MFP4: @176978-176982, 176984, 176990-176994, 177441 "Whitspace" churn after the VIMAGE/VNET whirls. Remove the need for some "init" functions within the network stack, like pim6_init(), icmp_init() or significantly shorten others like ip6_init() and nd6_init(), using static initialization again where possible and formerly missed. Move (most) variables back to the place they used to be before the container structs and VIMAGE_GLOABLS (before r185088) and try to reduce the diff to stable/7 and earlier as good as possible, to help out-of-tree consumers to update from 6.x or 7.x to 8 or 9. This also removes some header file pollution for putatively static global variables. Revert VIMAGE specific changes in ipfilter::ip_auth.c, that are no longer needed. Reviewed by: jhb Discussed with: rwatson Sponsored by: The FreeBSD Foundation Sponsored by: CK Software GmbH MFC after: 6 days
2010-04-29 11:52:42 +00:00
VNET_DEFINE(int, ipstealth);
Remove SYSCTL_VNET_* macros, and simply put CTLFLAG_VNET where needed. Sponsored by: Nginx, Inc.
2014-11-07 09:39:05 +00:00
SYSCTL_INT(_net_inet_ip, OID_AUTO, stealth, CTLFLAG_VNET | CTLFLAG_RW,
Build on Jeff Roberson's linker-set based dynamic per-CPU allocator (DPCPU), as suggested by Peter Wemm, and implement a new per-virtual network stack memory allocator. Modify vnet to use the allocator instead of monolithic global container structures (vinet, ...). This change solves many binary compatibility problems associated with VIMAGE, and restores ELF symbols for virtualized global variables. Each virtualized global variable exists as a "reference copy", and also once per virtual network stack. Virtualized global variables are tagged at compile-time, placing the in a special linker set, which is loaded into a contiguous region of kernel memory. Virtualized global variables in the base kernel are linked as normal, but those in modules are copied and relocated to a reserved portion of the kernel's vnet region with the help of a the kernel linker. Virtualized global variables exist in per-vnet memory set up when the network stack instance is created, and are initialized statically from the reference copy. Run-time access occurs via an accessor macro, which converts from the current vnet and requested symbol to a per-vnet address. When "options VIMAGE" is not compiled into the kernel, normal global ELF symbols will be used instead and indirection is avoided. This change restores static initialization for network stack global variables, restores support for non-global symbols and types, eliminates the need for many subsystem constructors, eliminates large per-subsystem structures that caused many binary compatibility issues both for monitoring applications (netstat) and kernel modules, removes the per-function INIT_VNET_*() macros throughout the stack, eliminates the need for vnet_symmap ksym(2) munging, and eliminates duplicate definitions of virtualized globals under VIMAGE_GLOBALS. Bump __FreeBSD_version and update UPDATING. Portions submitted by: bz Reviewed by: bz, zec Discussed with: gnn, jamie, jeff, jhb, julian, sam Suggested by: peter Approved by: re (kensmith)
2009-07-14 22:48:30 +00:00
&VNET_NAME(ipstealth), 0,
"IP stealth mode, no TTL decrementation on forwarding");
Add support for stealth forwarding (forwarding packets without touching their ttl). This can be used - in combination with the proper ipfw incantations - to make a firewall or router invisible to traceroute and other exploration tools. This behaviour is controlled by a sysctl variable (net.inet.ip.stealth) and hidden behind a kernel option (IPSTEALTH). Reviewed by: eivind, bde
1999-02-22 18:19:57 +00:00
#endif
Build on Jeff Roberson's linker-set based dynamic per-CPU allocator (DPCPU), as suggested by Peter Wemm, and implement a new per-virtual network stack memory allocator. Modify vnet to use the allocator instead of monolithic global container structures (vinet, ...). This change solves many binary compatibility problems associated with VIMAGE, and restores ELF symbols for virtualized global variables. Each virtualized global variable exists as a "reference copy", and also once per virtual network stack. Virtualized global variables are tagged at compile-time, placing the in a special linker set, which is loaded into a contiguous region of kernel memory. Virtualized global variables in the base kernel are linked as normal, but those in modules are copied and relocated to a reserved portion of the kernel's vnet region with the help of a the kernel linker. Virtualized global variables exist in per-vnet memory set up when the network stack instance is created, and are initialized statically from the reference copy. Run-time access occurs via an accessor macro, which converts from the current vnet and requested symbol to a per-vnet address. When "options VIMAGE" is not compiled into the kernel, normal global ELF symbols will be used instead and indirection is avoided. This change restores static initialization for network stack global variables, restores support for non-global symbols and types, eliminates the need for many subsystem constructors, eliminates large per-subsystem structures that caused many binary compatibility issues both for monitoring applications (netstat) and kernel modules, removes the per-function INIT_VNET_*() macros throughout the stack, eliminates the need for vnet_symmap ksym(2) munging, and eliminates duplicate definitions of virtualized globals under VIMAGE_GLOBALS. Bump __FreeBSD_version and update UPDATING. Portions submitted by: bz Reviewed by: bz, zec Discussed with: gnn, jamie, jeff, jhb, julian, sam Suggested by: peter Approved by: re (kensmith)
2009-07-14 22:48:30 +00:00
Merge from projects/counters: TCP/IP stats. Convert 'struct ipstat' and 'struct tcpstat' to counter(9). This speeds up IP forwarding at extreme packet rates, and makes accounting more precise. Sponsored by: Nginx, Inc.
2013-04-08 19:57:21 +00:00
/*
Use new macros to implement ipstat and tcpstat using PCPU counters. Change interface of kread_counters() similar ot kread() in the netstat(1).
2013-07-09 09:43:03 +00:00
* IP statistics are stored in the "array" of counter(9)s.
Merge from projects/counters: TCP/IP stats. Convert 'struct ipstat' and 'struct tcpstat' to counter(9). This speeds up IP forwarding at extreme packet rates, and makes accounting more precise. Sponsored by: Nginx, Inc.
2013-04-08 19:57:21 +00:00
*/
Use new macros to implement ipstat and tcpstat using PCPU counters. Change interface of kread_counters() similar ot kread() in the netstat(1).
2013-07-09 09:43:03 +00:00
VNET_PCPUSTAT_DEFINE(struct ipstat, ipstat);
VNET_PCPUSTAT_SYSINIT(ipstat);
SYSCTL_VNET_PCPUSTAT(_net_inet_ip, IPCTL_STATS, stats, struct ipstat, ipstat,
"IP statistics (struct ipstat, netinet/ip_var.h)");
Merge from projects/counters: TCP/IP stats. Convert 'struct ipstat' and 'struct tcpstat' to counter(9). This speeds up IP forwarding at extreme packet rates, and makes accounting more precise. Sponsored by: Nginx, Inc.
2013-04-08 19:57:21 +00:00
#ifdef VIMAGE
Use new macros to implement ipstat and tcpstat using PCPU counters. Change interface of kread_counters() similar ot kread() in the netstat(1).
2013-07-09 09:43:03 +00:00
VNET_PCPUSTAT_SYSUNINIT(ipstat);
Merge from projects/counters: TCP/IP stats. Convert 'struct ipstat' and 'struct tcpstat' to counter(9). This speeds up IP forwarding at extreme packet rates, and makes accounting more precise. Sponsored by: Nginx, Inc.
2013-04-08 19:57:21 +00:00
#endif /* VIMAGE */
Many network stack subsystems use a single global data structure to hold all pertinent statatistics for the subsystem. These structures are sometimes "borrowed" by kernel modules that require a place to store statistics for similar events. Add KPI accessor functions for statistics structures referenced by kernel modules so that they no longer encode certain specifics of how the data structures are named and stored. This change is intended to make it easier to move to per-CPU network stats following 8.0-RELEASE. The following modules are affected by this change: if_bridge if_cxgb if_gif ip_mroute ipdivert pf In practice, most of these statistics consumers should, in fact, maintain their own statistics data structures rather than borrowing structures from the base network stack. However, that change is too agressive for this point in the release cycle. Reviewed by: bz Approved by: re (kib)
2009-08-02 19:43:32 +00:00
/*
* Kernel module interface for updating ipstat. The argument is an index
Merge from projects/counters: TCP/IP stats. Convert 'struct ipstat' and 'struct tcpstat' to counter(9). This speeds up IP forwarding at extreme packet rates, and makes accounting more precise. Sponsored by: Nginx, Inc.
2013-04-08 19:57:21 +00:00
* into ipstat treated as an array.
Many network stack subsystems use a single global data structure to hold all pertinent statatistics for the subsystem. These structures are sometimes "borrowed" by kernel modules that require a place to store statistics for similar events. Add KPI accessor functions for statistics structures referenced by kernel modules so that they no longer encode certain specifics of how the data structures are named and stored. This change is intended to make it easier to move to per-CPU network stats following 8.0-RELEASE. The following modules are affected by this change: if_bridge if_cxgb if_gif ip_mroute ipdivert pf In practice, most of these statistics consumers should, in fact, maintain their own statistics data structures rather than borrowing structures from the base network stack. However, that change is too agressive for this point in the release cycle. Reviewed by: bz Approved by: re (kib)
2009-08-02 19:43:32 +00:00
*/
void
kmod_ipstat_inc(int statnum)
{
Use new macros to implement ipstat and tcpstat using PCPU counters. Change interface of kread_counters() similar ot kread() in the netstat(1).
2013-07-09 09:43:03 +00:00
counter_u64_add(VNET(ipstat)[statnum], 1);
Many network stack subsystems use a single global data structure to hold all pertinent statatistics for the subsystem. These structures are sometimes "borrowed" by kernel modules that require a place to store statistics for similar events. Add KPI accessor functions for statistics structures referenced by kernel modules so that they no longer encode certain specifics of how the data structures are named and stored. This change is intended to make it easier to move to per-CPU network stats following 8.0-RELEASE. The following modules are affected by this change: if_bridge if_cxgb if_gif ip_mroute ipdivert pf In practice, most of these statistics consumers should, in fact, maintain their own statistics data structures rather than borrowing structures from the base network stack. However, that change is too agressive for this point in the release cycle. Reviewed by: bz Approved by: re (kib)
2009-08-02 19:43:32 +00:00
}
void
kmod_ipstat_dec(int statnum)
{
Use new macros to implement ipstat and tcpstat using PCPU counters. Change interface of kread_counters() similar ot kread() in the netstat(1).
2013-07-09 09:43:03 +00:00
counter_u64_add(VNET(ipstat)[statnum], -1);
Many network stack subsystems use a single global data structure to hold all pertinent statatistics for the subsystem. These structures are sometimes "borrowed" by kernel modules that require a place to store statistics for similar events. Add KPI accessor functions for statistics structures referenced by kernel modules so that they no longer encode certain specifics of how the data structures are named and stored. This change is intended to make it easier to move to per-CPU network stats following 8.0-RELEASE. The following modules are affected by this change: if_bridge if_cxgb if_gif ip_mroute ipdivert pf In practice, most of these statistics consumers should, in fact, maintain their own statistics data structures rather than borrowing structures from the base network stack. However, that change is too agressive for this point in the release cycle. Reviewed by: bz Approved by: re (kib)
2009-08-02 19:43:32 +00:00
}
Reimplement the netisr framework in order to support parallel netisr threads: - Support up to one netisr thread per CPU, each processings its own workstream, or set of per-protocol queues. Threads may be bound to specific CPUs, or allowed to migrate, based on a global policy. In the future it would be desirable to support topology-centric policies, such as "one netisr per package". - Allow each protocol to advertise an ordering policy, which can currently be one of: NETISR_POLICY_SOURCE: packets must maintain ordering with respect to an implicit or explicit source (such as an interface or socket). NETISR_POLICY_FLOW: make use of mbuf flow identifiers to place work, as well as allowing protocols to provide a flow generation function for mbufs without flow identifers (m2flow). Falls back on NETISR_POLICY_SOURCE if now flow ID is available. NETISR_POLICY_CPU: allow protocols to inspect and assign a CPU for each packet handled by netisr (m2cpuid). - Provide utility functions for querying the number of workstreams being used, as well as a mapping function from workstream to CPU ID, which protocols may use in work placement decisions. - Add explicit interfaces to get and set per-protocol queue limits, and get and clear drop counters, which query data or apply changes across all workstreams. - Add a more extensible netisr registration interface, in which protocols declare 'struct netisr_handler' structures for each registered NETISR_ type. These include name, handler function, optional mbuf to flow ID function, optional mbuf to CPU ID function, queue limit, and ordering policy. Padding is present to allow these to be expanded in the future. If no queue limit is declared, then a default is used. - Queue limits are now per-workstream, and raised from the previous IFQ_MAXLEN default of 50 to 256. - All protocols are updated to use the new registration interface, and with the exception of netnatm, default queue limits. Most protocols register as NETISR_POLICY_SOURCE, except IPv4 and IPv6, which use NETISR_POLICY_FLOW, and will therefore take advantage of driver- generated flow IDs if present. - Formalize a non-packet based interface between interface polling and the netisr, rather than having polling pretend to be two protocols. Provide two explicit hooks in the netisr worker for start and end events for runs: netisr_poll() and netisr_pollmore(), as well as a function, netisr_sched_poll(), to allow the polling code to schedule netisr execution. DEVICE_POLLING still embeds single-netisr assumptions in its implementation, so for now if it is compiled into the kernel, a single and un-bound netisr thread is enforced regardless of tunable configuration. In the default configuration, the new netisr implementation maintains the same basic assumptions as the previous implementation: a single, un-bound worker thread processes all deferred work, and direct dispatch is enabled by default wherever possible. Performance measurement shows a marginal performance improvement over the old implementation due to the use of batched dequeue. An rmlock is used to synchronize use and registration/unregistration using the framework; currently, synchronized use is disabled (replicating current netisr policy) due to a measurable 3%-6% hit in ping-pong micro-benchmarking. It will be enabled once further rmlock optimization has taken place. However, in practice, netisrs are rarely registered or unregistered at runtime. A new man page for netisr will follow, but since one doesn't currently exist, it hasn't been updated. This change is not appropriate for MFC, although the polling shutdown handler should be merged to 7-STABLE. Bump __FreeBSD_version. Reviewed by: bz
2009-06-01 10:41:38 +00:00
static int
sysctl_netinet_intr_queue_maxlen(SYSCTL_HANDLER_ARGS)
{
int error, qlimit;
netisr_getqlimit(&ip_nh, &qlimit);
error = sysctl_handle_int(oidp, &qlimit, 0, req);
if (error || !req->newptr)
return (error);
if (qlimit < 1)
return (EINVAL);
return (netisr_setqlimit(&ip_nh, qlimit));
}
SYSCTL_PROC(_net_inet_ip, IPCTL_INTRQMAXLEN, intr_queue_maxlen,
CTLTYPE_INT|CTLFLAG_RW, 0, 0, sysctl_netinet_intr_queue_maxlen, "I",
"Maximum size of the IP input queue");
static int
sysctl_netinet_intr_queue_drops(SYSCTL_HANDLER_ARGS)
{
u_int64_t qdrops_long;
int error, qdrops;
netisr_getqdrops(&ip_nh, &qdrops_long);
qdrops = qdrops_long;
error = sysctl_handle_int(oidp, &qdrops, 0, req);
if (error || !req->newptr)
return (error);
if (qdrops != 0)
return (EINVAL);
netisr_clearqdrops(&ip_nh);
return (0);
}
SYSCTL_PROC(_net_inet_ip, IPCTL_INTRQDROPS, intr_queue_drops,
CTLTYPE_INT|CTLFLAG_RD, 0, 0, sysctl_netinet_intr_queue_drops, "I",
"Number of packets dropped from the IP input queue");
Update the IPv4 input path to handle reassembled frames and incoming frames with no RSS hash. When doing RSS: * Create a new IPv4 netisr which expects the frames to have been verified; it just directly dispatches to the IPv4 input path. * Once IPv4 reassembly is done, re-calculate the RSS hash with the new IP and L3 header; then reinject it as appropriate. * Update the IPv4 netisr to be a CPU affinity netisr with the RSS hash function (rss_soft_m2cpuid) - this will do a software hash if the hardware doesn't provide one. NICs that don't implement hardware RSS hashing will now benefit from RSS distribution - it'll inject into the correct destination netisr. Note: the netisr distribution doesn't work out of the box - netisr doesn't query RSS for how many CPUs and the affinity setup. Yes, netisr likely shouldn't really be doing CPU stuff anymore and should be "some kind of 'thing' that is a workqueue that may or may not have any CPU affinity"; that's for a later commit. Differential Revision: https://reviews.freebsd.org/D527 Reviewed by: grehan
2014-09-09 04:18:20 +00:00
#ifdef RSS
static int
sysctl_netinet_intr_direct_queue_maxlen(SYSCTL_HANDLER_ARGS)
{
int error, qlimit;
netisr_getqlimit(&ip_direct_nh, &qlimit);
error = sysctl_handle_int(oidp, &qlimit, 0, req);
if (error || !req->newptr)
return (error);
if (qlimit < 1)
return (EINVAL);
return (netisr_setqlimit(&ip_direct_nh, qlimit));
}
Make sysctl identifiers for direct netisr queue unique. Introduce IPCTL_INTRDQMAXLEN and IPCTL_INTRDQDROPS macros for this purpose. Reviewed by: gnn MFC after: 1 week Differential Revision: https://reviews.freebsd.org/D10358
2017-04-11 19:20:20 +00:00
SYSCTL_PROC(_net_inet_ip, IPCTL_INTRDQMAXLEN, intr_direct_queue_maxlen,
CTLTYPE_INT|CTLFLAG_RW, 0, 0, sysctl_netinet_intr_direct_queue_maxlen,
"I", "Maximum size of the IP direct input queue");
Update the IPv4 input path to handle reassembled frames and incoming frames with no RSS hash. When doing RSS: * Create a new IPv4 netisr which expects the frames to have been verified; it just directly dispatches to the IPv4 input path. * Once IPv4 reassembly is done, re-calculate the RSS hash with the new IP and L3 header; then reinject it as appropriate. * Update the IPv4 netisr to be a CPU affinity netisr with the RSS hash function (rss_soft_m2cpuid) - this will do a software hash if the hardware doesn't provide one. NICs that don't implement hardware RSS hashing will now benefit from RSS distribution - it'll inject into the correct destination netisr. Note: the netisr distribution doesn't work out of the box - netisr doesn't query RSS for how many CPUs and the affinity setup. Yes, netisr likely shouldn't really be doing CPU stuff anymore and should be "some kind of 'thing' that is a workqueue that may or may not have any CPU affinity"; that's for a later commit. Differential Revision: https://reviews.freebsd.org/D527 Reviewed by: grehan
2014-09-09 04:18:20 +00:00
static int
sysctl_netinet_intr_direct_queue_drops(SYSCTL_HANDLER_ARGS)
{
u_int64_t qdrops_long;
int error, qdrops;
netisr_getqdrops(&ip_direct_nh, &qdrops_long);
qdrops = qdrops_long;
error = sysctl_handle_int(oidp, &qdrops, 0, req);
if (error || !req->newptr)
return (error);
if (qdrops != 0)
return (EINVAL);
netisr_clearqdrops(&ip_direct_nh);
return (0);
}
Make sysctl identifiers for direct netisr queue unique. Introduce IPCTL_INTRDQMAXLEN and IPCTL_INTRDQDROPS macros for this purpose. Reviewed by: gnn MFC after: 1 week Differential Revision: https://reviews.freebsd.org/D10358
2017-04-11 19:20:20 +00:00
SYSCTL_PROC(_net_inet_ip, IPCTL_INTRDQDROPS, intr_direct_queue_drops,
Update the IPv4 input path to handle reassembled frames and incoming frames with no RSS hash. When doing RSS: * Create a new IPv4 netisr which expects the frames to have been verified; it just directly dispatches to the IPv4 input path. * Once IPv4 reassembly is done, re-calculate the RSS hash with the new IP and L3 header; then reinject it as appropriate. * Update the IPv4 netisr to be a CPU affinity netisr with the RSS hash function (rss_soft_m2cpuid) - this will do a software hash if the hardware doesn't provide one. NICs that don't implement hardware RSS hashing will now benefit from RSS distribution - it'll inject into the correct destination netisr. Note: the netisr distribution doesn't work out of the box - netisr doesn't query RSS for how many CPUs and the affinity setup. Yes, netisr likely shouldn't really be doing CPU stuff anymore and should be "some kind of 'thing' that is a workqueue that may or may not have any CPU affinity"; that's for a later commit. Differential Revision: https://reviews.freebsd.org/D527 Reviewed by: grehan
2014-09-09 04:18:20 +00:00
CTLTYPE_INT|CTLFLAG_RD, 0, 0, sysctl_netinet_intr_direct_queue_drops, "I",
"Number of packets dropped from the IP direct input queue");
#endif /* RSS */
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
/*
* IP initialization: fill in IP protocol switch table.
* All protocols not implemented in kernel go to raw IP protocol handler.
*/
void
Move universally to ANSI C function declarations, with relatively consistent style(9)-ish layout.
2007-05-10 15:58:48 +00:00
ip_init(void)
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
{
Move universally to ANSI C function declarations, with relatively consistent style(9)-ish layout.
2007-05-10 15:58:48 +00:00
struct protosw *pr;
int i;
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
Commit step 1 of the vimage project, (network stack) virtualization work done by Marko Zec (zec@). This is the first in a series of commits over the course of the next few weeks. Mark all uses of global variables to be virtualized with a V_ prefix. Use macros to map them back to their global names for now, so this is a NOP change only. We hope to have caught at least 85-90% of what is needed so we do not invalidate a lot of outstanding patches again. Obtained from: //depot/projects/vimage-commit2/... Reviewed by: brooks, des, ed, mav, julian, jamie, kris, rwatson, zec, ... (various people I forgot, different versions) md5 (with a bit of help) Sponsored by: NLnet Foundation, The FreeBSD Foundation X-MFC after: never V_Commit_Message_Reviewed_By: more people than the patch
2008-08-17 23:27:27 +00:00
TAILQ_INIT(&V_in_ifaddrhead);
V_in_ifaddrhashtbl = hashinit(INADDR_NHASH, M_IFADDR, &V_in_ifaddrhmask);
First pass at separating per-vnet initializer functions from existing functions for initializing global state. At this stage, the new per-vnet initializer functions are directly called from the existing global initialization code, which should in most cases result in compiler inlining those new functions, hence yielding a near-zero functional change. Modify the existing initializer functions which are invoked via protosw, like ip_init() et. al., to allow them to be invoked multiple times, i.e. per each vnet. Global state, if any, is initialized only if such functions are called within the context of vnet0, which will be determined via the IS_DEFAULT_VNET(curvnet) check (currently always true). While here, V_irtualize a few remaining global UMA zones used by net/netinet/netipsec networking code. While it is not yet clear to me or anybody else whether this is the right thing to do, at this stage this makes the code more readable, and makes it easier to track uncollected UMA-zone-backed objects on vnet removal. In the long run, it's quite possible that some form of shared use of UMA zone pools among multiple vnets should be considered. Bump __FreeBSD_version due to changes in layout of structs vnet_ipfw, vnet_inet and vnet_net. Approved by: julian (mentor)
2009-04-06 22:29:41 +00:00
/* Initialize IP reassembly queue. */
Move all code related to IP fragment reassembly to ip_reass.c. Some function names have changed and comments are reformatted or added, but there is no functional change. Claim copyright for me and Adrian. Sponsored by: Nginx, Inc.
2015-04-10 06:02:37 +00:00
ipreass_init();
First pass at separating per-vnet initializer functions from existing functions for initializing global state. At this stage, the new per-vnet initializer functions are directly called from the existing global initialization code, which should in most cases result in compiler inlining those new functions, hence yielding a near-zero functional change. Modify the existing initializer functions which are invoked via protosw, like ip_init() et. al., to allow them to be invoked multiple times, i.e. per each vnet. Global state, if any, is initialized only if such functions are called within the context of vnet0, which will be determined via the IS_DEFAULT_VNET(curvnet) check (currently always true). While here, V_irtualize a few remaining global UMA zones used by net/netinet/netipsec networking code. While it is not yet clear to me or anybody else whether this is the right thing to do, at this stage this makes the code more readable, and makes it easier to track uncollected UMA-zone-backed objects on vnet removal. In the long run, it's quite possible that some form of shared use of UMA zone pools among multiple vnets should be considered. Bump __FreeBSD_version due to changes in layout of structs vnet_ipfw, vnet_inet and vnet_net. Approved by: julian (mentor)
2009-04-06 22:29:41 +00:00
Virtualize the pfil hooks so that different jails may chose different packet filters. ALso allows ipfw to be enabled on on ejail and disabled on another. In 8.0 it's a global setting. Sitting aroung in tree waiting to commit for: 2 months MFC after: 2 months
2009-10-11 05:59:43 +00:00
/* Initialize packet filter hooks. */
V_inet_pfil_hook.ph_type = PFIL_TYPE_AF;
V_inet_pfil_hook.ph_af = AF_INET;
if ((i = pfil_head_register(&V_inet_pfil_hook)) != 0)
printf("%s: WARNING: unable to register pfil hook, "
"error %d\n", __func__, i);
Overhaul if_enc(4) and make it loadable in run-time. Use hhook(9) framework to achieve ability of loading and unloading if_enc(4) kernel module. INET and INET6 code on initialization registers two helper hooks points in the kernel. if_enc(4) module uses these helper hook points and registers its hooks. IPSEC code uses these hhook points to call helper hooks implemented in if_enc(4).
2015-11-25 07:31:59 +00:00
if (hhook_head_register(HHOOK_TYPE_IPSEC_IN, AF_INET,
&V_ipsec_hhh_in[HHOOK_IPSEC_INET],
HHOOK_WAITOK | HHOOK_HEADISINVNET) != 0)
printf("%s: WARNING: unable to register input helper hook\n",
__func__);
if (hhook_head_register(HHOOK_TYPE_IPSEC_OUT, AF_INET,
&V_ipsec_hhh_out[HHOOK_IPSEC_INET],
HHOOK_WAITOK | HHOOK_HEADISINVNET) != 0)
printf("%s: WARNING: unable to register output helper hook\n",
__func__);
First pass at separating per-vnet initializer functions from existing functions for initializing global state. At this stage, the new per-vnet initializer functions are directly called from the existing global initialization code, which should in most cases result in compiler inlining those new functions, hence yielding a near-zero functional change. Modify the existing initializer functions which are invoked via protosw, like ip_init() et. al., to allow them to be invoked multiple times, i.e. per each vnet. Global state, if any, is initialized only if such functions are called within the context of vnet0, which will be determined via the IS_DEFAULT_VNET(curvnet) check (currently always true). While here, V_irtualize a few remaining global UMA zones used by net/netinet/netipsec networking code. While it is not yet clear to me or anybody else whether this is the right thing to do, at this stage this makes the code more readable, and makes it easier to track uncollected UMA-zone-backed objects on vnet removal. In the long run, it's quite possible that some form of shared use of UMA zone pools among multiple vnets should be considered. Bump __FreeBSD_version due to changes in layout of structs vnet_ipfw, vnet_inet and vnet_net. Approved by: julian (mentor)
2009-04-06 22:29:41 +00:00
/* Skip initialization of globals for non-default instances. */
Introduce a per-VNET flag to enable/disable netisr prcessing on that VNET. Add accessor functions to toggle the state per VNET. The base system (vnet0) will always enable itself with the normal registration. We will share the registered protocol handlers in all VNETs minimising duplication and management. Upon disabling netisr processing for a VNET drain the netisr queue from packets for that VNET. Update netisr consumers to (de)register on a per-VNET start/teardown using VNET_SYS(UN)INIT functionality. The change should be transparent for non-VIMAGE kernels. Reviewed by: gnn (, hiren) Obtained from: projects/vnet MFC after: 2 weeks Sponsored by: The FreeBSD Foundation Differential Revision: https://reviews.freebsd.org/D6691
2016-06-03 13:57:10 +00:00
#ifdef VIMAGE
if (!IS_DEFAULT_VNET(curvnet)) {
netisr_register_vnet(&ip_nh);
#ifdef RSS
netisr_register_vnet(&ip_direct_nh);
#endif
First pass at separating per-vnet initializer functions from existing functions for initializing global state. At this stage, the new per-vnet initializer functions are directly called from the existing global initialization code, which should in most cases result in compiler inlining those new functions, hence yielding a near-zero functional change. Modify the existing initializer functions which are invoked via protosw, like ip_init() et. al., to allow them to be invoked multiple times, i.e. per each vnet. Global state, if any, is initialized only if such functions are called within the context of vnet0, which will be determined via the IS_DEFAULT_VNET(curvnet) check (currently always true). While here, V_irtualize a few remaining global UMA zones used by net/netinet/netipsec networking code. While it is not yet clear to me or anybody else whether this is the right thing to do, at this stage this makes the code more readable, and makes it easier to track uncollected UMA-zone-backed objects on vnet removal. In the long run, it's quite possible that some form of shared use of UMA zone pools among multiple vnets should be considered. Bump __FreeBSD_version due to changes in layout of structs vnet_ipfw, vnet_inet and vnet_net. Approved by: julian (mentor)
2009-04-06 22:29:41 +00:00
return;
Introduce a per-VNET flag to enable/disable netisr prcessing on that VNET. Add accessor functions to toggle the state per VNET. The base system (vnet0) will always enable itself with the normal registration. We will share the registered protocol handlers in all VNETs minimising duplication and management. Upon disabling netisr processing for a VNET drain the netisr queue from packets for that VNET. Update netisr consumers to (de)register on a per-VNET start/teardown using VNET_SYS(UN)INIT functionality. The change should be transparent for non-VIMAGE kernels. Reviewed by: gnn (, hiren) Obtained from: projects/vnet MFC after: 2 weeks Sponsored by: The FreeBSD Foundation Differential Revision: https://reviews.freebsd.org/D6691
2016-06-03 13:57:10 +00:00
}
#endif
First pass at separating per-vnet initializer functions from existing functions for initializing global state. At this stage, the new per-vnet initializer functions are directly called from the existing global initialization code, which should in most cases result in compiler inlining those new functions, hence yielding a near-zero functional change. Modify the existing initializer functions which are invoked via protosw, like ip_init() et. al., to allow them to be invoked multiple times, i.e. per each vnet. Global state, if any, is initialized only if such functions are called within the context of vnet0, which will be determined via the IS_DEFAULT_VNET(curvnet) check (currently always true). While here, V_irtualize a few remaining global UMA zones used by net/netinet/netipsec networking code. While it is not yet clear to me or anybody else whether this is the right thing to do, at this stage this makes the code more readable, and makes it easier to track uncollected UMA-zone-backed objects on vnet removal. In the long run, it's quite possible that some form of shared use of UMA zone pools among multiple vnets should be considered. Bump __FreeBSD_version due to changes in layout of structs vnet_ipfw, vnet_inet and vnet_net. Approved by: julian (mentor)
2009-04-06 22:29:41 +00:00
Patches from Keiichi SHIMA <keiichi@iij.ad.jp> to make ip use the standard protosw structure again. Obtained from: Well, KAME I guess.
2001-09-03 20:03:55 +00:00
pr = pffindproto(PF_INET, IPPROTO_RAW, SOCK_RAW);
Prefer (NULL) spelling of (0) for pointers. MFC after: 3 days
2005-01-30 19:29:47 +00:00
if (pr == NULL)
Fix an out of bounds write during the initialization of the PF_INET protocol family to the ip_protox[] array. The protocol number of IPPROTO_DIVERT is larger than IPPROTO_MAX and was initializing memory beyond the array. Catch all these kinds of errors by ignoring protocols that are higher than IPPROTO_MAX or 0 (zero). Add more comments ip_init().
2004-09-16 18:33:39 +00:00
panic("ip_init: PF_INET not found");
/* Initialize the entire ip_protox[] array to IPPROTO_RAW. */
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
for (i = 0; i < IPPROTO_MAX; i++)
ip_protox[i] = pr - inetsw;
Fix an out of bounds write during the initialization of the PF_INET protocol family to the ip_protox[] array. The protocol number of IPPROTO_DIVERT is larger than IPPROTO_MAX and was initializing memory beyond the array. Catch all these kinds of errors by ignoring protocols that are higher than IPPROTO_MAX or 0 (zero). Add more comments ip_init().
2004-09-16 18:33:39 +00:00
/*
* Cycle through IP protocols and put them into the appropriate place
* in ip_protox[].
*/
Patches from Keiichi SHIMA <keiichi@iij.ad.jp> to make ip use the standard protosw structure again. Obtained from: Well, KAME I guess.
2001-09-03 20:03:55 +00:00
for (pr = inetdomain.dom_protosw;
pr < inetdomain.dom_protoswNPROTOSW; pr++)
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
if (pr->pr_domain->dom_family == PF_INET &&
Fix an out of bounds write during the initialization of the PF_INET protocol family to the ip_protox[] array. The protocol number of IPPROTO_DIVERT is larger than IPPROTO_MAX and was initializing memory beyond the array. Catch all these kinds of errors by ignoring protocols that are higher than IPPROTO_MAX or 0 (zero). Add more comments ip_init().
2004-09-16 18:33:39 +00:00
pr->pr_protocol && pr->pr_protocol != IPPROTO_RAW) {
/* Be careful to only index valid IP protocols. */
fix potential invalid index into ip_protox array Noticed by: Coverity Prevent analysis tool
2005-02-23 00:38:12 +00:00
if (pr->pr_protocol < IPPROTO_MAX)
Fix an out of bounds write during the initialization of the PF_INET protocol family to the ip_protox[] array. The protocol number of IPPROTO_DIVERT is larger than IPPROTO_MAX and was initializing memory beyond the array. Catch all these kinds of errors by ignoring protocols that are higher than IPPROTO_MAX or 0 (zero). Add more comments ip_init().
2004-09-16 18:33:39 +00:00
ip_protox[pr->pr_protocol] = pr - inetsw;
}
Prevent overflow with fragmented packets Reviewed by: wollman
1997-09-15 23:07:01 +00:00
Reimplement the netisr framework in order to support parallel netisr threads: - Support up to one netisr thread per CPU, each processings its own workstream, or set of per-protocol queues. Threads may be bound to specific CPUs, or allowed to migrate, based on a global policy. In the future it would be desirable to support topology-centric policies, such as "one netisr per package". - Allow each protocol to advertise an ordering policy, which can currently be one of: NETISR_POLICY_SOURCE: packets must maintain ordering with respect to an implicit or explicit source (such as an interface or socket). NETISR_POLICY_FLOW: make use of mbuf flow identifiers to place work, as well as allowing protocols to provide a flow generation function for mbufs without flow identifers (m2flow). Falls back on NETISR_POLICY_SOURCE if now flow ID is available. NETISR_POLICY_CPU: allow protocols to inspect and assign a CPU for each packet handled by netisr (m2cpuid). - Provide utility functions for querying the number of workstreams being used, as well as a mapping function from workstream to CPU ID, which protocols may use in work placement decisions. - Add explicit interfaces to get and set per-protocol queue limits, and get and clear drop counters, which query data or apply changes across all workstreams. - Add a more extensible netisr registration interface, in which protocols declare 'struct netisr_handler' structures for each registered NETISR_ type. These include name, handler function, optional mbuf to flow ID function, optional mbuf to CPU ID function, queue limit, and ordering policy. Padding is present to allow these to be expanded in the future. If no queue limit is declared, then a default is used. - Queue limits are now per-workstream, and raised from the previous IFQ_MAXLEN default of 50 to 256. - All protocols are updated to use the new registration interface, and with the exception of netnatm, default queue limits. Most protocols register as NETISR_POLICY_SOURCE, except IPv4 and IPv6, which use NETISR_POLICY_FLOW, and will therefore take advantage of driver- generated flow IDs if present. - Formalize a non-packet based interface between interface polling and the netisr, rather than having polling pretend to be two protocols. Provide two explicit hooks in the netisr worker for start and end events for runs: netisr_poll() and netisr_pollmore(), as well as a function, netisr_sched_poll(), to allow the polling code to schedule netisr execution. DEVICE_POLLING still embeds single-netisr assumptions in its implementation, so for now if it is compiled into the kernel, a single and un-bound netisr thread is enforced regardless of tunable configuration. In the default configuration, the new netisr implementation maintains the same basic assumptions as the previous implementation: a single, un-bound worker thread processes all deferred work, and direct dispatch is enabled by default wherever possible. Performance measurement shows a marginal performance improvement over the old implementation due to the use of batched dequeue. An rmlock is used to synchronize use and registration/unregistration using the framework; currently, synchronized use is disabled (replicating current netisr policy) due to a measurable 3%-6% hit in ping-pong micro-benchmarking. It will be enabled once further rmlock optimization has taken place. However, in practice, netisrs are rarely registered or unregistered at runtime. A new man page for netisr will follow, but since one doesn't currently exist, it hasn't been updated. This change is not appropriate for MFC, although the polling shutdown handler should be merged to 7-STABLE. Bump __FreeBSD_version. Reviewed by: bz
2009-06-01 10:41:38 +00:00
netisr_register(&ip_nh);
Update the IPv4 input path to handle reassembled frames and incoming frames with no RSS hash. When doing RSS: * Create a new IPv4 netisr which expects the frames to have been verified; it just directly dispatches to the IPv4 input path. * Once IPv4 reassembly is done, re-calculate the RSS hash with the new IP and L3 header; then reinject it as appropriate. * Update the IPv4 netisr to be a CPU affinity netisr with the RSS hash function (rss_soft_m2cpuid) - this will do a software hash if the hardware doesn't provide one. NICs that don't implement hardware RSS hashing will now benefit from RSS distribution - it'll inject into the correct destination netisr. Note: the netisr distribution doesn't work out of the box - netisr doesn't query RSS for how many CPUs and the affinity setup. Yes, netisr likely shouldn't really be doing CPU stuff anymore and should be "some kind of 'thing' that is a workqueue that may or may not have any CPU affinity"; that's for a later commit. Differential Revision: https://reviews.freebsd.org/D527 Reviewed by: grehan
2014-09-09 04:18:20 +00:00
#ifdef RSS
netisr_register(&ip_direct_nh);
#endif
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
}
Split up ip_drain() into an outer lock and iterator part and a "locked" version that will only handle a single network stack instance. The latter is called directly from ip_destroy(). Hook up an ip_destroy() function to release resources from the legacy IP network layer upon virtual network stack teardown. Sponsored by: ISPsystem Reviewed by: rwatson MFC After: 5 days
2010-02-20 19:59:52 +00:00
#ifdef VIMAGE
The pr_destroy field does not allow us to run the teardown code in a specific order. VNET_SYSUNINITs however are doing exactly that. Thus remove the VIMAGE conditional field from the domain(9) protosw structure and replace it with VNET_SYSUNINITs. This also allows us to change some order and to make the teardown functions file local static. Also convert divert(4) as it uses the same mechanism ip(4) and ip6(4) use internally. Slightly reshuffle the SI_SUB_* fields in kernel.h and add a new ones, e.g., for pfil consumers (firewalls), partially for this commit and for others to come. Reviewed by: gnn, tuexen (sctp), jhb (kernel.h) Obtained from: projects/vnet MFC after: 2 weeks X-MFC: do not remove pr_destroy Sponsored by: The FreeBSD Foundation Differential Revision: https://reviews.freebsd.org/D6652
2016-06-01 10:14:04 +00:00
static void
ip_destroy(void *unused __unused)
Split up ip_drain() into an outer lock and iterator part and a "locked" version that will only handle a single network stack instance. The latter is called directly from ip_destroy(). Hook up an ip_destroy() function to release resources from the legacy IP network layer upon virtual network stack teardown. Sponsored by: ISPsystem Reviewed by: rwatson MFC After: 5 days
2010-02-20 19:59:52 +00:00
{
Get closer to a VIMAGE network stack teardown from top to bottom rather than removing the network interfaces first. This change is rather larger and convoluted as the ordering requirements cannot be separated. Move the pfil(9) framework to SI_SUB_PROTO_PFIL, move Firewalls and related modules to their own SI_SUB_PROTO_FIREWALL. Move initialization of "physical" interfaces to SI_SUB_DRIVERS, move virtual (cloned) interfaces to SI_SUB_PSEUDO. Move Multicast to SI_SUB_PROTO_MC. Re-work parts of multicast initialisation and teardown, not taking the huge amount of memory into account if used as a module yet. For interface teardown we try to do as many of them as we can on SI_SUB_INIT_IF, but for some this makes no sense, e.g., when tunnelling over a higher layer protocol such as IP. In that case the interface has to go along (or before) the higher layer protocol is shutdown. Kernel hhooks need to go last on teardown as they may be used at various higher layers and we cannot remove them before we cleaned up the higher layers. For interface teardown there are multiple paths: (a) a cloned interface is destroyed (inside a VIMAGE or in the base system), (b) any interface is moved from a virtual network stack to a different network stack ("vmove"), or (c) a virtual network stack is being shut down. All code paths go through if_detach_internal() where we, depending on the vmove flag or the vnet state, make a decision on how much to shut down; in case we are destroying a VNET the individual protocol layers will cleanup their own parts thus we cannot do so again for each interface as we end up with, e.g., double-frees, destroying locks twice or acquiring already destroyed locks. When calling into protocol cleanups we equally have to tell them whether they need to detach upper layer protocols ("ulp") or not (e.g., in6_ifdetach()). Provide or enahnce helper functions to do proper cleanup at a protocol rather than at an interface level. Approved by: re (hrs) Obtained from: projects/vnet Reviewed by: gnn, jhb Sponsored by: The FreeBSD Foundation MFC after: 2 weeks Differential Revision: https://reviews.freebsd.org/D6747
2016-06-21 13:48:49 +00:00
struct ifnet *ifp;
Overhaul if_enc(4) and make it loadable in run-time. Use hhook(9) framework to achieve ability of loading and unloading if_enc(4) kernel module. INET and INET6 code on initialization registers two helper hooks points in the kernel. if_enc(4) module uses these helper hook points and registers its hooks. IPSEC code uses these hhook points to call helper hooks implemented in if_enc(4).
2015-11-25 07:31:59 +00:00
int error;
Unregister inet/inet6 pfil hooks on vnet destroy. Discussed with: andre Approved by: re (rodrigc)
2013-09-13 18:45:10 +00:00
Introduce a per-VNET flag to enable/disable netisr prcessing on that VNET. Add accessor functions to toggle the state per VNET. The base system (vnet0) will always enable itself with the normal registration. We will share the registered protocol handlers in all VNETs minimising duplication and management. Upon disabling netisr processing for a VNET drain the netisr queue from packets for that VNET. Update netisr consumers to (de)register on a per-VNET start/teardown using VNET_SYS(UN)INIT functionality. The change should be transparent for non-VIMAGE kernels. Reviewed by: gnn (, hiren) Obtained from: projects/vnet MFC after: 2 weeks Sponsored by: The FreeBSD Foundation Differential Revision: https://reviews.freebsd.org/D6691
2016-06-03 13:57:10 +00:00
#ifdef RSS
netisr_unregister_vnet(&ip_direct_nh);
#endif
netisr_unregister_vnet(&ip_nh);
Overhaul if_enc(4) and make it loadable in run-time. Use hhook(9) framework to achieve ability of loading and unloading if_enc(4) kernel module. INET and INET6 code on initialization registers two helper hooks points in the kernel. if_enc(4) module uses these helper hook points and registers its hooks. IPSEC code uses these hhook points to call helper hooks implemented in if_enc(4).
2015-11-25 07:31:59 +00:00
if ((error = pfil_head_unregister(&V_inet_pfil_hook)) != 0)
Unregister inet/inet6 pfil hooks on vnet destroy. Discussed with: andre Approved by: re (rodrigc)
2013-09-13 18:45:10 +00:00
printf("%s: WARNING: unable to unregister pfil hook, "
Overhaul if_enc(4) and make it loadable in run-time. Use hhook(9) framework to achieve ability of loading and unloading if_enc(4) kernel module. INET and INET6 code on initialization registers two helper hooks points in the kernel. if_enc(4) module uses these helper hook points and registers its hooks. IPSEC code uses these hhook points to call helper hooks implemented in if_enc(4).
2015-11-25 07:31:59 +00:00
"error %d\n", __func__, error);
error = hhook_head_deregister(V_ipsec_hhh_in[HHOOK_IPSEC_INET]);
if (error != 0) {
printf("%s: WARNING: unable to deregister input helper hook "
"type HHOOK_TYPE_IPSEC_IN, id HHOOK_IPSEC_INET: "
"error %d returned\n", __func__, error);
}
error = hhook_head_deregister(V_ipsec_hhh_out[HHOOK_IPSEC_INET]);
if (error != 0) {
printf("%s: WARNING: unable to deregister output helper hook "
"type HHOOK_TYPE_IPSEC_OUT, id HHOOK_IPSEC_INET: "
"error %d returned\n", __func__, error);
}
Get closer to a VIMAGE network stack teardown from top to bottom rather than removing the network interfaces first. This change is rather larger and convoluted as the ordering requirements cannot be separated. Move the pfil(9) framework to SI_SUB_PROTO_PFIL, move Firewalls and related modules to their own SI_SUB_PROTO_FIREWALL. Move initialization of "physical" interfaces to SI_SUB_DRIVERS, move virtual (cloned) interfaces to SI_SUB_PSEUDO. Move Multicast to SI_SUB_PROTO_MC. Re-work parts of multicast initialisation and teardown, not taking the huge amount of memory into account if used as a module yet. For interface teardown we try to do as many of them as we can on SI_SUB_INIT_IF, but for some this makes no sense, e.g., when tunnelling over a higher layer protocol such as IP. In that case the interface has to go along (or before) the higher layer protocol is shutdown. Kernel hhooks need to go last on teardown as they may be used at various higher layers and we cannot remove them before we cleaned up the higher layers. For interface teardown there are multiple paths: (a) a cloned interface is destroyed (inside a VIMAGE or in the base system), (b) any interface is moved from a virtual network stack to a different network stack ("vmove"), or (c) a virtual network stack is being shut down. All code paths go through if_detach_internal() where we, depending on the vmove flag or the vnet state, make a decision on how much to shut down; in case we are destroying a VNET the individual protocol layers will cleanup their own parts thus we cannot do so again for each interface as we end up with, e.g., double-frees, destroying locks twice or acquiring already destroyed locks. When calling into protocol cleanups we equally have to tell them whether they need to detach upper layer protocols ("ulp") or not (e.g., in6_ifdetach()). Provide or enahnce helper functions to do proper cleanup at a protocol rather than at an interface level. Approved by: re (hrs) Obtained from: projects/vnet Reviewed by: gnn, jhb Sponsored by: The FreeBSD Foundation MFC after: 2 weeks Differential Revision: https://reviews.freebsd.org/D6747
2016-06-21 13:48:49 +00:00
/* Remove the IPv4 addresses from all interfaces. */
in_ifscrub_all();
/* Make sure the IPv4 routes are gone as well. */
IFNET_RLOCK();
TAILQ_FOREACH(ifp, &V_ifnet, if_link)
rt_flushifroutes_af(ifp, AF_INET);
IFNET_RUNLOCK();
Split up ip_drain() into an outer lock and iterator part and a "locked" version that will only handle a single network stack instance. The latter is called directly from ip_destroy(). Hook up an ip_destroy() function to release resources from the legacy IP network layer upon virtual network stack teardown. Sponsored by: ISPsystem Reviewed by: rwatson MFC After: 5 days
2010-02-20 19:59:52 +00:00
Make ip reassembly queue mutexes per-vnet, putting them into the structure that they protect. Sponsored by: Nginx, Inc.
2015-04-09 21:17:07 +00:00
/* Destroy IP reassembly queue. */
Move all code related to IP fragment reassembly to ip_reass.c. Some function names have changed and comments are reformatted or added, but there is no functional change. Claim copyright for me and Adrian. Sponsored by: Nginx, Inc.
2015-04-10 06:02:37 +00:00
ipreass_destroy();
Get closer to a VIMAGE network stack teardown from top to bottom rather than removing the network interfaces first. This change is rather larger and convoluted as the ordering requirements cannot be separated. Move the pfil(9) framework to SI_SUB_PROTO_PFIL, move Firewalls and related modules to their own SI_SUB_PROTO_FIREWALL. Move initialization of "physical" interfaces to SI_SUB_DRIVERS, move virtual (cloned) interfaces to SI_SUB_PSEUDO. Move Multicast to SI_SUB_PROTO_MC. Re-work parts of multicast initialisation and teardown, not taking the huge amount of memory into account if used as a module yet. For interface teardown we try to do as many of them as we can on SI_SUB_INIT_IF, but for some this makes no sense, e.g., when tunnelling over a higher layer protocol such as IP. In that case the interface has to go along (or before) the higher layer protocol is shutdown. Kernel hhooks need to go last on teardown as they may be used at various higher layers and we cannot remove them before we cleaned up the higher layers. For interface teardown there are multiple paths: (a) a cloned interface is destroyed (inside a VIMAGE or in the base system), (b) any interface is moved from a virtual network stack to a different network stack ("vmove"), or (c) a virtual network stack is being shut down. All code paths go through if_detach_internal() where we, depending on the vmove flag or the vnet state, make a decision on how much to shut down; in case we are destroying a VNET the individual protocol layers will cleanup their own parts thus we cannot do so again for each interface as we end up with, e.g., double-frees, destroying locks twice or acquiring already destroyed locks. When calling into protocol cleanups we equally have to tell them whether they need to detach upper layer protocols ("ulp") or not (e.g., in6_ifdetach()). Provide or enahnce helper functions to do proper cleanup at a protocol rather than at an interface level. Approved by: re (hrs) Obtained from: projects/vnet Reviewed by: gnn, jhb Sponsored by: The FreeBSD Foundation MFC after: 2 weeks Differential Revision: https://reviews.freebsd.org/D6747
2016-06-21 13:48:49 +00:00
/* Cleanup in_ifaddr hash table; should be empty. */
hashdestroy(V_in_ifaddrhashtbl, M_IFADDR, V_in_ifaddrhmask);
Split up ip_drain() into an outer lock and iterator part and a "locked" version that will only handle a single network stack instance. The latter is called directly from ip_destroy(). Hook up an ip_destroy() function to release resources from the legacy IP network layer upon virtual network stack teardown. Sponsored by: ISPsystem Reviewed by: rwatson MFC After: 5 days
2010-02-20 19:59:52 +00:00
}
The pr_destroy field does not allow us to run the teardown code in a specific order. VNET_SYSUNINITs however are doing exactly that. Thus remove the VIMAGE conditional field from the domain(9) protosw structure and replace it with VNET_SYSUNINITs. This also allows us to change some order and to make the teardown functions file local static. Also convert divert(4) as it uses the same mechanism ip(4) and ip6(4) use internally. Slightly reshuffle the SI_SUB_* fields in kernel.h and add a new ones, e.g., for pfil consumers (firewalls), partially for this commit and for others to come. Reviewed by: gnn, tuexen (sctp), jhb (kernel.h) Obtained from: projects/vnet MFC after: 2 weeks X-MFC: do not remove pr_destroy Sponsored by: The FreeBSD Foundation Differential Revision: https://reviews.freebsd.org/D6652
2016-06-01 10:14:04 +00:00
VNET_SYSUNINIT(ip, SI_SUB_PROTO_DOMAIN, SI_ORDER_THIRD, ip_destroy, NULL);
Split up ip_drain() into an outer lock and iterator part and a "locked" version that will only handle a single network stack instance. The latter is called directly from ip_destroy(). Hook up an ip_destroy() function to release resources from the legacy IP network layer upon virtual network stack teardown. Sponsored by: ISPsystem Reviewed by: rwatson MFC After: 5 days
2010-02-20 19:59:52 +00:00
#endif
Update the IPv4 input path to handle reassembled frames and incoming frames with no RSS hash. When doing RSS: * Create a new IPv4 netisr which expects the frames to have been verified; it just directly dispatches to the IPv4 input path. * Once IPv4 reassembly is done, re-calculate the RSS hash with the new IP and L3 header; then reinject it as appropriate. * Update the IPv4 netisr to be a CPU affinity netisr with the RSS hash function (rss_soft_m2cpuid) - this will do a software hash if the hardware doesn't provide one. NICs that don't implement hardware RSS hashing will now benefit from RSS distribution - it'll inject into the correct destination netisr. Note: the netisr distribution doesn't work out of the box - netisr doesn't query RSS for how many CPUs and the affinity setup. Yes, netisr likely shouldn't really be doing CPU stuff anymore and should be "some kind of 'thing' that is a workqueue that may or may not have any CPU affinity"; that's for a later commit. Differential Revision: https://reviews.freebsd.org/D527 Reviewed by: grehan
2014-09-09 04:18:20 +00:00
#ifdef RSS
/*
* IP direct input routine.
*
* This is called when reinjecting completed fragments where
* all of the previous checking and book-keeping has been done.
*/
void
ip_direct_input(struct mbuf *m)
{
struct ip *ip;
int hlen;
ip = mtod(m, struct ip *);
hlen = ip->ip_hl << 2;
Merge projects/ipsec into head/. Small summary ------------- o Almost all IPsec releated code was moved into sys/netipsec. o New kernel modules added: ipsec.ko and tcpmd5.ko. New kernel option IPSEC_SUPPORT added. It enables support for loading and unloading of ipsec.ko and tcpmd5.ko kernel modules. o IPSEC_NAT_T option was removed. Now NAT-T support is enabled by default. The UDP_ENCAP_ESPINUDP_NON_IKE encapsulation type support was removed. Added TCP/UDP checksum handling for inbound packets that were decapsulated by transport mode SAs. setkey(8) modified to show run-time NAT-T configuration of SA. o New network pseudo interface if_ipsec(4) added. For now it is build as part of ipsec.ko module (or with IPSEC kernel). It implements IPsec virtual tunnels to create route-based VPNs. o The network stack now invokes IPsec functions using special methods. The only one header file <netipsec/ipsec_support.h> should be included to declare all the needed things to work with IPsec. o All IPsec protocols handlers (ESP/AH/IPCOMP protosw) were removed. Now these protocols are handled directly via IPsec methods. o TCP_SIGNATURE support was reworked to be more close to RFC. o PF_KEY SADB was reworked: - now all security associations stored in the single SPI namespace, and all SAs MUST have unique SPI. - several hash tables added to speed up lookups in SADB. - SADB now uses rmlock to protect access, and concurrent threads can do SA lookups in the same time. - many PF_KEY message handlers were reworked to reflect changes in SADB. - SADB_UPDATE message was extended to support new PF_KEY headers: SADB_X_EXT_NEW_ADDRESS_SRC and SADB_X_EXT_NEW_ADDRESS_DST. They can be used by IKE daemon to change SA addresses. o ipsecrequest and secpolicy structures were cardinally changed to avoid locking protection for ipsecrequest. Now we support only limited number (4) of bundled SAs, but they are supported for both INET and INET6. o INPCB security policy cache was introduced. Each PCB now caches used security policies to avoid SP lookup for each packet. o For inbound security policies added the mode, when the kernel does check for full history of applied IPsec transforms. o References counting rules for security policies and security associations were changed. The proper SA locking added into xform code. o xform code was also changed. Now it is possible to unregister xforms. tdb_xxx structures were changed and renamed to reflect changes in SADB/SPDB, and changed rules for locking and refcounting. Reviewed by: gnn, wblock Obtained from: Yandex LLC Relnotes: yes Sponsored by: Yandex LLC Differential Revision: https://reviews.freebsd.org/D9352
2017-02-06 08:49:57 +00:00
#if defined(IPSEC) || defined(IPSEC_SUPPORT)
if (IPSEC_ENABLED(ipv4)) {
if (IPSEC_INPUT(ipv4, m, hlen, ip->ip_p) != 0)
return;
}
#endif /* IPSEC */
Update the IPv4 input path to handle reassembled frames and incoming frames with no RSS hash. When doing RSS: * Create a new IPv4 netisr which expects the frames to have been verified; it just directly dispatches to the IPv4 input path. * Once IPv4 reassembly is done, re-calculate the RSS hash with the new IP and L3 header; then reinject it as appropriate. * Update the IPv4 netisr to be a CPU affinity netisr with the RSS hash function (rss_soft_m2cpuid) - this will do a software hash if the hardware doesn't provide one. NICs that don't implement hardware RSS hashing will now benefit from RSS distribution - it'll inject into the correct destination netisr. Note: the netisr distribution doesn't work out of the box - netisr doesn't query RSS for how many CPUs and the affinity setup. Yes, netisr likely shouldn't really be doing CPU stuff anymore and should be "some kind of 'thing' that is a workqueue that may or may not have any CPU affinity"; that's for a later commit. Differential Revision: https://reviews.freebsd.org/D527 Reviewed by: grehan
2014-09-09 04:18:20 +00:00
IPSTAT_INC(ips_delivered);
(*inetsw[ip_protox[ip->ip_p]].pr_input)(&m, &hlen, ip->ip_p);
return;
}
#endif
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
/*
* Ip input routine. Checksum and byte swap header. If fragmented
* try to reassemble. Process options. Pass to next level.
*/
Provide a direct entry point for IP input. This actually results in a slight decrease in performance, but will lead to better performance later.
1996-02-05 20:36:02 +00:00
void
ip_input(struct mbuf *m)
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
{
Introduce ip_fastforward and remove ip_flow. Short description of ip_fastforward: o adds full direct process-to-completion IPv4 forwarding code o handles ip fragmentation incl. hw support (ip_flow did not) o sends icmp needfrag to source if DF is set (ip_flow did not) o supports ipfw and ipfilter (ip_flow did not) o supports divert, ipfw fwd and ipfilter nat (ip_flow did not) o returns anything it can't handle back to normal ip_input Enable with sysctl -w net.inet.ip.fastforwarding=1 Reviewed by: sam (mentor)
2003-11-14 21:02:22 +00:00
struct ip *ip = NULL;
Augment the 'ifaddr' structure with a 'struct if_data' to keep statistics on a per network address basis. Teach the IPv4 and IPv6 input/output routines to log packets/bytes against the network address connected to the flow. Teach netstat to display the per-address stats for IP protocols when 'netstat -i' is evoked, instead of displaying the per-interface stats.
2000-10-19 23:15:54 +00:00
struct in_ifaddr *ia = NULL;
Add a hash table that contains the list of internet addresses, and use this in place of the in_ifaddr list when appropriate. This improves performance on hosts which have a large number of IP aliases.
2001-09-29 04:34:11 +00:00
struct ifaddr *ifa;
In ip_input(), cache the received mbuf's network interface in a local variable. Acquire the interface address list lock when iterating over the interface address list searching for a matching received broadcast address. MFC after: 2 weeks
2009-04-20 14:35:42 +00:00
struct ifnet *ifp;
Convert ipfw to use PFIL_HOOKS. This is change is transparent to userland and preserves the ipfw ABI. The ipfw core packet inspection and filtering functions have not been changed, only how ipfw is invoked is different. However there are many changes how ipfw is and its add-on's are handled: In general ipfw is now called through the PFIL_HOOKS and most associated magic, that was in ip_input() or ip_output() previously, is now done in ipfw_check_[in|out]() in the ipfw PFIL handler. IPDIVERT is entirely handled within the ipfw PFIL handlers. A packet to be diverted is checked if it is fragmented, if yes, ip_reass() gets in for reassembly. If not, or all fragments arrived and the packet is complete, divert_packet is called directly. For 'tee' no reassembly attempt is made and a copy of the packet is sent to the divert socket unmodified. The original packet continues its way through ip_input/output(). ipfw 'forward' is done via m_tag's. The ipfw PFIL handlers tag the packet with the new destination sockaddr_in. A check if the new destination is a local IP address is made and the m_flags are set appropriately. ip_input() and ip_output() have some more work to do here. For ip_input() the m_flags are checked and a packet for us is directly sent to the 'ours' section for further processing. Destination changes on the input path are only tagged and the 'srcrt' flag to ip_forward() is set to disable destination checks and ICMP replies at this stage. The tag is going to be handled on output. ip_output() again checks for m_flags and the 'ours' tag. If found, the packet will be dropped back to the IP netisr where it is going to be picked up by ip_input() again and the directly sent to the 'ours' section. When only the destination changes, the route's 'dst' is overwritten with the new destination from the forward m_tag. Then it jumps back at the route lookup again and skips the firewall check because it has been marked with M_SKIP_FIREWALL. ipfw 'forward' has to be compiled into the kernel with 'option IPFIREWALL_FORWARD' to enable it. DUMMYNET is entirely handled within the ipfw PFIL handlers. A packet for a dummynet pipe or queue is directly sent to dummynet_io(). Dummynet will then inject it back into ip_input/ip_output() after it has served its time. Dummynet packets are tagged and will continue from the next rule when they hit the ipfw PFIL handlers again after re-injection. BRIDGING and IPFW_ETHER are not changed yet and use ipfw_chk() directly as they did before. Later this will be changed to dedicated ETHER PFIL_HOOKS. More detailed changes to the code: conf/files Add netinet/ip_fw_pfil.c. conf/options Add IPFIREWALL_FORWARD option. modules/ipfw/Makefile Add ip_fw_pfil.c. net/bridge.c Disable PFIL_HOOKS if ipfw for bridging is active. Bridging ipfw is still directly invoked to handle layer2 headers and packets would get a double ipfw when run through PFIL_HOOKS as well. netinet/ip_divert.c Removed divert_clone() function. It is no longer used. netinet/ip_dummynet.[ch] Neither the route 'ro' nor the destination 'dst' need to be stored while in dummynet transit. Structure members and associated macros are removed. netinet/ip_fastfwd.c Removed all direct ipfw handling code and replace it with the new 'ipfw forward' handling code. netinet/ip_fw.h Removed 'ro' and 'dst' from struct ip_fw_args. netinet/ip_fw2.c (Re)moved some global variables and the module handling. netinet/ip_fw_pfil.c New file containing the ipfw PFIL handlers and module initialization. netinet/ip_input.c Removed all direct ipfw handling code and replace it with the new 'ipfw forward' handling code. ip_forward() does not longer require the 'next_hop' struct sockaddr_in argument. Disable early checks if 'srcrt' is set. netinet/ip_output.c Removed all direct ipfw handling code and replace it with the new 'ipfw forward' handling code. netinet/ip_var.h Add ip_reass() as general function. (Used from ipfw PFIL handlers for IPDIVERT.) netinet/raw_ip.c Directly check if ipfw and dummynet control pointers are active. netinet/tcp_input.c Rework the 'ipfw forward' to local code to work with the new way of forward tags. netinet/tcp_sack.c Remove include 'opt_ipfw.h' which is not needed here. sys/mbuf.h Remove m_claim_next() macro which was exclusively for ipfw 'forward' and is no longer needed. Approved by: re (scottl)
2004-08-17 22:05:54 +00:00
int checkif, hlen = 0;
A step in resolving mess with byte ordering for AF_INET. After this change: - All packets in NETISR_IP queue are in net byte order. - ip_input() is entered in net byte order and converts packet to host byte order right _after_ processing pfil(9) hooks. - ip_output() is entered in host byte order and converts packet to net byte order right _before_ processing pfil(9) hooks. - ip_fragment() accepts and emits packet in net byte order. - ip_forward(), ip_mloopback() use host byte order (untouched actually). - ip_fastforward() no longer modifies packet at all (except ip_ttl). - Swapping of byte order there and back removed from the following modules: pf(4), ipfw(4), enc(4), if_bridge(4). - Swapping of byte order added to ipfilter(4), based on __FreeBSD_version - __FreeBSD_version bumped. - pfil(9) manual page updated. Reviewed by: ray, luigi, eri, melifaro Tested by: glebius (LE), ray (BE)
2012-10-06 10:02:11 +00:00
uint16_t sum, ip_len;
Remove the global one-level rtcache variable and associated complex locking and rework ip_rtaddr() to do its own rtlookup. Adopt all its callers to this and make ip_output() callable with NULL rt pointer. Reviewed by: sam (mentor)
2003-11-14 21:48:57 +00:00
int dchg = 0; /* dest changed after fw */
pfil hooks can modify packet contents so check if the destination address has been changed when PFIL_HOOKS is enabled and, if it has, arrange for the proper action by ip*_forward. Supported by: FreeBSD Foundation Submitted by: Pyun YongHyeon
2003-10-16 16:25:25 +00:00
struct in_addr odst; /* original dst address */
Miscellaneous fixes/cleanups relating to ipfw and divert(4): - Implement 'ipfw tee' (finally) - Divert packets by calling new function divert_packet() directly instead of going through protosw[]. - Replace kludgey global variable 'ip_divert_port' with a function parameter to divert_packet() - Replace kludgey global variable 'frag_divert_port' with a function parameter to ip_reass() - style(9) fixes Reviewed by: julian, green
1999-12-06 00:43:07 +00:00
Remove leading spaces before tabs spotted thanks to silby using kwrite to read ip_input.c.
2007-05-16 20:46:58 +00:00
M_ASSERTPKTHDR(m);
Move the IPSEC related code blocks to their own file to unclutter and signifincantly improve the readability of ip_input() and ip_output() again. The resulting IPSEC hooks in ip_input() and ip_output() may be used later on for making IPSEC loadable. This move is mostly mechanical and should preserve current IPSEC behaviour as-is. Nothing shall prevent improvements in the way IPSEC interacts with the IPv4 stack. Discussed with: bz, gnn, rwatson; (earlier version)
2006-02-01 13:55:03 +00:00
Re-remove MT_TAGs. The problems with dummynet have been fixed now. Tested by: -current, bms(mentor), me Approved by: bms(mentor), sam
2004-02-25 19:55:29 +00:00
if (m->m_flags & M_FASTFWD_OURS) {
Clarify some comments for the M_FASTFWD_OURS case in ip_input().
2004-09-15 20:17:03 +00:00
m->m_flags &= ~M_FASTFWD_OURS;
/* Set up some basics that will be used later. */
Convert ipfw to use PFIL_HOOKS. This is change is transparent to userland and preserves the ipfw ABI. The ipfw core packet inspection and filtering functions have not been changed, only how ipfw is invoked is different. However there are many changes how ipfw is and its add-on's are handled: In general ipfw is now called through the PFIL_HOOKS and most associated magic, that was in ip_input() or ip_output() previously, is now done in ipfw_check_[in|out]() in the ipfw PFIL handler. IPDIVERT is entirely handled within the ipfw PFIL handlers. A packet to be diverted is checked if it is fragmented, if yes, ip_reass() gets in for reassembly. If not, or all fragments arrived and the packet is complete, divert_packet is called directly. For 'tee' no reassembly attempt is made and a copy of the packet is sent to the divert socket unmodified. The original packet continues its way through ip_input/output(). ipfw 'forward' is done via m_tag's. The ipfw PFIL handlers tag the packet with the new destination sockaddr_in. A check if the new destination is a local IP address is made and the m_flags are set appropriately. ip_input() and ip_output() have some more work to do here. For ip_input() the m_flags are checked and a packet for us is directly sent to the 'ours' section for further processing. Destination changes on the input path are only tagged and the 'srcrt' flag to ip_forward() is set to disable destination checks and ICMP replies at this stage. The tag is going to be handled on output. ip_output() again checks for m_flags and the 'ours' tag. If found, the packet will be dropped back to the IP netisr where it is going to be picked up by ip_input() again and the directly sent to the 'ours' section. When only the destination changes, the route's 'dst' is overwritten with the new destination from the forward m_tag. Then it jumps back at the route lookup again and skips the firewall check because it has been marked with M_SKIP_FIREWALL. ipfw 'forward' has to be compiled into the kernel with 'option IPFIREWALL_FORWARD' to enable it. DUMMYNET is entirely handled within the ipfw PFIL handlers. A packet for a dummynet pipe or queue is directly sent to dummynet_io(). Dummynet will then inject it back into ip_input/ip_output() after it has served its time. Dummynet packets are tagged and will continue from the next rule when they hit the ipfw PFIL handlers again after re-injection. BRIDGING and IPFW_ETHER are not changed yet and use ipfw_chk() directly as they did before. Later this will be changed to dedicated ETHER PFIL_HOOKS. More detailed changes to the code: conf/files Add netinet/ip_fw_pfil.c. conf/options Add IPFIREWALL_FORWARD option. modules/ipfw/Makefile Add ip_fw_pfil.c. net/bridge.c Disable PFIL_HOOKS if ipfw for bridging is active. Bridging ipfw is still directly invoked to handle layer2 headers and packets would get a double ipfw when run through PFIL_HOOKS as well. netinet/ip_divert.c Removed divert_clone() function. It is no longer used. netinet/ip_dummynet.[ch] Neither the route 'ro' nor the destination 'dst' need to be stored while in dummynet transit. Structure members and associated macros are removed. netinet/ip_fastfwd.c Removed all direct ipfw handling code and replace it with the new 'ipfw forward' handling code. netinet/ip_fw.h Removed 'ro' and 'dst' from struct ip_fw_args. netinet/ip_fw2.c (Re)moved some global variables and the module handling. netinet/ip_fw_pfil.c New file containing the ipfw PFIL handlers and module initialization. netinet/ip_input.c Removed all direct ipfw handling code and replace it with the new 'ipfw forward' handling code. ip_forward() does not longer require the 'next_hop' struct sockaddr_in argument. Disable early checks if 'srcrt' is set. netinet/ip_output.c Removed all direct ipfw handling code and replace it with the new 'ipfw forward' handling code. netinet/ip_var.h Add ip_reass() as general function. (Used from ipfw PFIL handlers for IPDIVERT.) netinet/raw_ip.c Directly check if ipfw and dummynet control pointers are active. netinet/tcp_input.c Rework the 'ipfw forward' to local code to work with the new way of forward tags. netinet/tcp_sack.c Remove include 'opt_ipfw.h' which is not needed here. sys/mbuf.h Remove m_claim_next() macro which was exclusively for ipfw 'forward' and is no longer needed. Approved by: re (scottl)
2004-08-17 22:05:54 +00:00
ip = mtod(m, struct ip *);
hlen = ip->ip_hl << 2;
Switch the entire IPv4 stack to keep the IP packet header in network byte order. Any host byte order processing is done in local variables and host byte order values are never[1] written to a packet. After this change a packet processed by the stack isn't modified at all[2] except for TTL. After this change a network stack hacker doesn't need to scratch his head trying to figure out what is the byte order at the given place in the stack. [1] One exception still remains. The raw sockets convert host byte order before pass a packet to an application. Probably this would remain for ages for compatibility. [2] The ip_input() still subtructs header len from ip->ip_len, but this is planned to be fixed soon. Reviewed by: luigi, Maxim Dounin <mdounin mdounin.ru> Tested by: ray, Olivier Cochard-Labbe <olivier cochard.me>
2012-10-22 21:09:03 +00:00
ip_len = ntohs(ip->ip_len);
Remove leading spaces before tabs spotted thanks to silby using kwrite to read ip_input.c.
2007-05-16 20:46:58 +00:00
goto ours;
}
Backout MT_TAG removal (i.e. bring back MT_TAGs) for now, as dummynet is not working properly with the patch in place. Approved by: bms(mentor)
2004-02-18 00:04:52 +00:00
Update stats in struct ipstat using four new macros, IPSTAT_ADD(), IPSTAT_INC(), IPSTAT_SUB(), and IPSTAT_DEC(), rather than directly manipulating the fields across the kernel. This will make it easier to change the implementation of these statistics, such as using per-CPU versions of the data structures. MFC after: 3 days
2009-04-11 23:35:20 +00:00
IPSTAT_INC(ips_total);
All three files: make COMPAT_IPFW==0 case work again. ip_input.c: - delete some dusty code - _IP_VHL - use fast inline header checksum when possible
1996-10-07 19:21:46 +00:00
if (m->m_pkthdr.len < sizeof(struct ip))
goto tooshort;
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
if (m->m_len < sizeof (struct ip) &&
Consistently use NULL for pointer comparisons.
2004-08-11 10:46:15 +00:00
(m = m_pullup(m, sizeof (struct ip))) == NULL) {
Update stats in struct ipstat using four new macros, IPSTAT_ADD(), IPSTAT_INC(), IPSTAT_SUB(), and IPSTAT_DEC(), rather than directly manipulating the fields across the kernel. This will make it easier to change the implementation of these statistics, such as using per-CPU versions of the data structures. MFC after: 3 days
2009-04-11 23:35:20 +00:00
IPSTAT_INC(ips_toosmall);
Provide a direct entry point for IP input. This actually results in a slight decrease in performance, but will lead to better performance later.
1996-02-05 20:36:02 +00:00
return;
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
}
ip = mtod(m, struct ip *);
All three files: make COMPAT_IPFW==0 case work again. ip_input.c: - delete some dusty code - _IP_VHL - use fast inline header checksum when possible
1996-10-07 19:21:46 +00:00
Fix two instances of variant struct definitions in sys/netinet: Remove the never completed _IP_VHL version, it has not caught on anywhere and it would make us incompatible with other BSD netstacks to retain this version. Add a CTASSERT protecting sizeof(struct ip) == 20. Don't let the size of struct ipq depend on the IPDIVERT option. This is a functional no-op commit. Approved by: re
2002-10-20 22:52:07 +00:00
if (ip->ip_v != IPVERSION) {
Update stats in struct ipstat using four new macros, IPSTAT_ADD(), IPSTAT_INC(), IPSTAT_SUB(), and IPSTAT_DEC(), rather than directly manipulating the fields across the kernel. This will make it easier to change the implementation of these statistics, such as using per-CPU versions of the data structures. MFC after: 3 days
2009-04-11 23:35:20 +00:00
IPSTAT_INC(ips_badvers);
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
goto bad;
}
All three files: make COMPAT_IPFW==0 case work again. ip_input.c: - delete some dusty code - _IP_VHL - use fast inline header checksum when possible
1996-10-07 19:21:46 +00:00
Fix two instances of variant struct definitions in sys/netinet: Remove the never completed _IP_VHL version, it has not caught on anywhere and it would make us incompatible with other BSD netstacks to retain this version. Add a CTASSERT protecting sizeof(struct ip) == 20. Don't let the size of struct ipq depend on the IPDIVERT option. This is a functional no-op commit. Approved by: re
2002-10-20 22:52:07 +00:00
hlen = ip->ip_hl << 2;
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
if (hlen < sizeof(struct ip)) { /* minimum header length */
Update stats in struct ipstat using four new macros, IPSTAT_ADD(), IPSTAT_INC(), IPSTAT_SUB(), and IPSTAT_DEC(), rather than directly manipulating the fields across the kernel. This will make it easier to change the implementation of these statistics, such as using per-CPU versions of the data structures. MFC after: 3 days
2009-04-11 23:35:20 +00:00
IPSTAT_INC(ips_badhlen);
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
goto bad;
}
if (hlen > m->m_len) {
Consistently use NULL for pointer comparisons.
2004-08-11 10:46:15 +00:00
if ((m = m_pullup(m, hlen)) == NULL) {
Update stats in struct ipstat using four new macros, IPSTAT_ADD(), IPSTAT_INC(), IPSTAT_SUB(), and IPSTAT_DEC(), rather than directly manipulating the fields across the kernel. This will make it easier to change the implementation of these statistics, such as using per-CPU versions of the data structures. MFC after: 3 days
2009-04-11 23:35:20 +00:00
IPSTAT_INC(ips_badhlen);
Provide a direct entry point for IP input. This actually results in a slight decrease in performance, but will lead to better performance later.
1996-02-05 20:36:02 +00:00
return;
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
}
ip = mtod(m, struct ip *);
}
Sync with recent KAME. This work was based on kame-20010528-freebsd43-snap.tgz and some critical problem after the snap was out were fixed. There are many many changes since last KAME merge. TODO: - The definitions of SADB_* in sys/net/pfkeyv2.h are still different from RFC2407/IANA assignment because of binary compatibility issue. It should be fixed under 5-CURRENT. - ip6po_m member of struct ip6_pktopts is no longer used. But, it is still there because of binary compatibility issue. It should be removed under 5-CURRENT. Reviewed by: itojun Obtained from: KAME MFC after: 3 weeks
2001-06-11 12:39:29 +00:00
Implement the ip, tcp, and udp DTrace providers. The probe definitions use dynamic translation so that their arguments match the definitions for these providers in Solaris and illumos. Thus, existing scripts for these providers should work unmodified on FreeBSD. Tested by: gnn, hiren MFC after: 1 month
2013-08-25 21:54:41 +00:00
IP_PROBE(receive, NULL, NULL, ip, m->m_pkthdr.rcvif, ip, NULL);
Sync with recent KAME. This work was based on kame-20010528-freebsd43-snap.tgz and some critical problem after the snap was out were fixed. There are many many changes since last KAME merge. TODO: - The definitions of SADB_* in sys/net/pfkeyv2.h are still different from RFC2407/IANA assignment because of binary compatibility issue. It should be fixed under 5-CURRENT. - ip6po_m member of struct ip6_pktopts is no longer used. But, it is still there because of binary compatibility issue. It should be removed under 5-CURRENT. Reviewed by: itojun Obtained from: KAME MFC after: 3 weeks
2001-06-11 12:39:29 +00:00
/* 127/8 must not appear on wire - RFC1122 */
In ip_input(), cache the received mbuf's network interface in a local variable. Acquire the interface address list lock when iterating over the interface address list searching for a matching received broadcast address. MFC after: 2 weeks
2009-04-20 14:35:42 +00:00
ifp = m->m_pkthdr.rcvif;
Sync with recent KAME. This work was based on kame-20010528-freebsd43-snap.tgz and some critical problem after the snap was out were fixed. There are many many changes since last KAME merge. TODO: - The definitions of SADB_* in sys/net/pfkeyv2.h are still different from RFC2407/IANA assignment because of binary compatibility issue. It should be fixed under 5-CURRENT. - ip6po_m member of struct ip6_pktopts is no longer used. But, it is still there because of binary compatibility issue. It should be removed under 5-CURRENT. Reviewed by: itojun Obtained from: KAME MFC after: 3 weeks
2001-06-11 12:39:29 +00:00
if ((ntohl(ip->ip_dst.s_addr) >> IN_CLASSA_NSHIFT) == IN_LOOPBACKNET ||
(ntohl(ip->ip_src.s_addr) >> IN_CLASSA_NSHIFT) == IN_LOOPBACKNET) {
In ip_input(), cache the received mbuf's network interface in a local variable. Acquire the interface address list lock when iterating over the interface address list searching for a matching received broadcast address. MFC after: 2 weeks
2009-04-20 14:35:42 +00:00
if ((ifp->if_flags & IFF_LOOPBACK) == 0) {
Update stats in struct ipstat using four new macros, IPSTAT_ADD(), IPSTAT_INC(), IPSTAT_SUB(), and IPSTAT_DEC(), rather than directly manipulating the fields across the kernel. This will make it easier to change the implementation of these statistics, such as using per-CPU versions of the data structures. MFC after: 3 days
2009-04-11 23:35:20 +00:00
IPSTAT_INC(ips_badaddr);
Sync with recent KAME. This work was based on kame-20010528-freebsd43-snap.tgz and some critical problem after the snap was out were fixed. There are many many changes since last KAME merge. TODO: - The definitions of SADB_* in sys/net/pfkeyv2.h are still different from RFC2407/IANA assignment because of binary compatibility issue. It should be fixed under 5-CURRENT. - ip6po_m member of struct ip6_pktopts is no longer used. But, it is still there because of binary compatibility issue. It should be removed under 5-CURRENT. Reviewed by: itojun Obtained from: KAME MFC after: 3 weeks
2001-06-11 12:39:29 +00:00
goto bad;
}
}
Add support for offloading IP/TCP/UDP checksums to NIC hardware which supports them.
2000-03-27 19:14:27 +00:00
if (m->m_pkthdr.csum_flags & CSUM_IP_CHECKED) {
sum = !(m->m_pkthdr.csum_flags & CSUM_IP_VALID);
All three files: make COMPAT_IPFW==0 case work again. ip_input.c: - delete some dusty code - _IP_VHL - use fast inline header checksum when possible
1996-10-07 19:21:46 +00:00
} else {
Add support for offloading IP/TCP/UDP checksums to NIC hardware which supports them.
2000-03-27 19:14:27 +00:00
if (hlen == sizeof(struct ip)) {
sum = in_cksum_hdr(ip);
} else {
sum = in_cksum(m, hlen);
}
All three files: make COMPAT_IPFW==0 case work again. ip_input.c: - delete some dusty code - _IP_VHL - use fast inline header checksum when possible
1996-10-07 19:21:46 +00:00
}
Don't zero ip->ip_sum during sum validation. This should only affect programs that sit on top of divert(4) sockets. The multicast routing code already unconditionally zeros the sum before recalculating. Any code that unconditionaly sums a packet without first zeroing the sum (assuming that it's already zero'd) will break. No such code seems to exist.
1997-02-06 11:14:22 +00:00
if (sum) {
Update stats in struct ipstat using four new macros, IPSTAT_ADD(), IPSTAT_INC(), IPSTAT_SUB(), and IPSTAT_DEC(), rather than directly manipulating the fields across the kernel. This will make it easier to change the implementation of these statistics, such as using per-CPU versions of the data structures. MFC after: 3 days
2009-04-11 23:35:20 +00:00
IPSTAT_INC(ips_badsum);
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
goto bad;
}
Link ALTQ to the build and break with ABI for struct ifnet. Please recompile your (network) modules as well as any userland that might make sense of sizeof(struct ifnet). This does not change the queueing yet. These changes will follow in a seperate commit. Same with the driver changes, which need case by case evaluation. __FreeBSD_version bump will follow. Tested-by: (i386)LINT
2004-06-13 17:29:10 +00:00
#ifdef ALTQ
if (altq_input != NULL && (*altq_input)(m, AF_INET) == 0)
/* packet is dropped by traffic conditioner */
return;
#endif
A step in resolving mess with byte ordering for AF_INET. After this change: - All packets in NETISR_IP queue are in net byte order. - ip_input() is entered in net byte order and converts packet to host byte order right _after_ processing pfil(9) hooks. - ip_output() is entered in host byte order and converts packet to net byte order right _before_ processing pfil(9) hooks. - ip_fragment() accepts and emits packet in net byte order. - ip_forward(), ip_mloopback() use host byte order (untouched actually). - ip_fastforward() no longer modifies packet at all (except ip_ttl). - Swapping of byte order there and back removed from the following modules: pf(4), ipfw(4), enc(4), if_bridge(4). - Swapping of byte order added to ipfilter(4), based on __FreeBSD_version - __FreeBSD_version bumped. - pfil(9) manual page updated. Reviewed by: ray, luigi, eri, melifaro Tested by: glebius (LE), ray (BE)
2012-10-06 10:02:11 +00:00
ip_len = ntohs(ip->ip_len);
if (ip_len < hlen) {
Update stats in struct ipstat using four new macros, IPSTAT_ADD(), IPSTAT_INC(), IPSTAT_SUB(), and IPSTAT_DEC(), rather than directly manipulating the fields across the kernel. This will make it easier to change the implementation of these statistics, such as using per-CPU versions of the data structures. MFC after: 3 days
2009-04-11 23:35:20 +00:00
IPSTAT_INC(ips_badlen);
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
goto bad;
}
/*
* Check that the amount of data in the buffers
* is as at least much as the IP header would have us expect.
* Trim mbufs if longer than we expect.
* Drop packet if shorter than we expect.
*/
A step in resolving mess with byte ordering for AF_INET. After this change: - All packets in NETISR_IP queue are in net byte order. - ip_input() is entered in net byte order and converts packet to host byte order right _after_ processing pfil(9) hooks. - ip_output() is entered in host byte order and converts packet to net byte order right _before_ processing pfil(9) hooks. - ip_fragment() accepts and emits packet in net byte order. - ip_forward(), ip_mloopback() use host byte order (untouched actually). - ip_fastforward() no longer modifies packet at all (except ip_ttl). - Swapping of byte order there and back removed from the following modules: pf(4), ipfw(4), enc(4), if_bridge(4). - Swapping of byte order added to ipfilter(4), based on __FreeBSD_version - __FreeBSD_version bumped. - pfil(9) manual page updated. Reviewed by: ray, luigi, eri, melifaro Tested by: glebius (LE), ray (BE)
2012-10-06 10:02:11 +00:00
if (m->m_pkthdr.len < ip_len) {
All three files: make COMPAT_IPFW==0 case work again. ip_input.c: - delete some dusty code - _IP_VHL - use fast inline header checksum when possible
1996-10-07 19:21:46 +00:00
tooshort:
Update stats in struct ipstat using four new macros, IPSTAT_ADD(), IPSTAT_INC(), IPSTAT_SUB(), and IPSTAT_DEC(), rather than directly manipulating the fields across the kernel. This will make it easier to change the implementation of these statistics, such as using per-CPU versions of the data structures. MFC after: 3 days
2009-04-11 23:35:20 +00:00
IPSTAT_INC(ips_tooshort);
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
goto bad;
}
A step in resolving mess with byte ordering for AF_INET. After this change: - All packets in NETISR_IP queue are in net byte order. - ip_input() is entered in net byte order and converts packet to host byte order right _after_ processing pfil(9) hooks. - ip_output() is entered in host byte order and converts packet to net byte order right _before_ processing pfil(9) hooks. - ip_fragment() accepts and emits packet in net byte order. - ip_forward(), ip_mloopback() use host byte order (untouched actually). - ip_fastforward() no longer modifies packet at all (except ip_ttl). - Swapping of byte order there and back removed from the following modules: pf(4), ipfw(4), enc(4), if_bridge(4). - Swapping of byte order added to ipfilter(4), based on __FreeBSD_version - __FreeBSD_version bumped. - pfil(9) manual page updated. Reviewed by: ray, luigi, eri, melifaro Tested by: glebius (LE), ray (BE)
2012-10-06 10:02:11 +00:00
if (m->m_pkthdr.len > ip_len) {
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
if (m->m_len == m->m_pkthdr.len) {
A step in resolving mess with byte ordering for AF_INET. After this change: - All packets in NETISR_IP queue are in net byte order. - ip_input() is entered in net byte order and converts packet to host byte order right _after_ processing pfil(9) hooks. - ip_output() is entered in host byte order and converts packet to net byte order right _before_ processing pfil(9) hooks. - ip_fragment() accepts and emits packet in net byte order. - ip_forward(), ip_mloopback() use host byte order (untouched actually). - ip_fastforward() no longer modifies packet at all (except ip_ttl). - Swapping of byte order there and back removed from the following modules: pf(4), ipfw(4), enc(4), if_bridge(4). - Swapping of byte order added to ipfilter(4), based on __FreeBSD_version - __FreeBSD_version bumped. - pfil(9) manual page updated. Reviewed by: ray, luigi, eri, melifaro Tested by: glebius (LE), ray (BE)
2012-10-06 10:02:11 +00:00
m->m_len = ip_len;
m->m_pkthdr.len = ip_len;
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
} else
A step in resolving mess with byte ordering for AF_INET. After this change: - All packets in NETISR_IP queue are in net byte order. - ip_input() is entered in net byte order and converts packet to host byte order right _after_ processing pfil(9) hooks. - ip_output() is entered in host byte order and converts packet to net byte order right _before_ processing pfil(9) hooks. - ip_fragment() accepts and emits packet in net byte order. - ip_forward(), ip_mloopback() use host byte order (untouched actually). - ip_fastforward() no longer modifies packet at all (except ip_ttl). - Swapping of byte order there and back removed from the following modules: pf(4), ipfw(4), enc(4), if_bridge(4). - Swapping of byte order added to ipfilter(4), based on __FreeBSD_version - __FreeBSD_version bumped. - pfil(9) manual page updated. Reviewed by: ray, luigi, eri, melifaro Tested by: glebius (LE), ray (BE)
2012-10-06 10:02:11 +00:00
m_adj(m, ip_len - m->m_pkthdr.len);
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
}
Update the IPv4 input path to handle reassembled frames and incoming frames with no RSS hash. When doing RSS: * Create a new IPv4 netisr which expects the frames to have been verified; it just directly dispatches to the IPv4 input path. * Once IPv4 reassembly is done, re-calculate the RSS hash with the new IP and L3 header; then reinject it as appropriate. * Update the IPv4 netisr to be a CPU affinity netisr with the RSS hash function (rss_soft_m2cpuid) - this will do a software hash if the hardware doesn't provide one. NICs that don't implement hardware RSS hashing will now benefit from RSS distribution - it'll inject into the correct destination netisr. Note: the netisr distribution doesn't work out of the box - netisr doesn't query RSS for how many CPUs and the affinity setup. Yes, netisr likely shouldn't really be doing CPU stuff anymore and should be "some kind of 'thing' that is a workqueue that may or may not have any CPU affinity"; that's for a later commit. Differential Revision: https://reviews.freebsd.org/D527 Reviewed by: grehan
2014-09-09 04:18:20 +00:00
ip[6]_tryforward does inbound and outbound packet firewall processing. This can lead to change of mbuf pointer (packet filter could do m_pullup(), NAT, etc). Also in case of change of destination address, tryforward can decide that packet should be handled by local system. In this case modified mbuf can be returned to the ip[6]_input(). To handle this correctly, check M_FASTFWD_OURS flag after return from ip[6]_tryforward. And if it is present, update variables that depend from mbuf pointer and skip another inbound firewall processing. No objection from: #network MFC after: 3 weeks Sponsored by: Yandex LLC Differential Revision: https://reviews.freebsd.org/D8764
2016-12-19 11:02:49 +00:00
/*
* Try to forward the packet, but if we fail continue.
* ip_tryforward() does inbound and outbound packet firewall
* processing. If firewall has decided that destination becomes
* our local address, it sets M_FASTFWD_OURS flag. In this
* case skip another inbound firewall processing and update
* ip pointer.
*/
if (V_ipforwarding != 0
Merge projects/ipsec into head/. Small summary ------------- o Almost all IPsec releated code was moved into sys/netipsec. o New kernel modules added: ipsec.ko and tcpmd5.ko. New kernel option IPSEC_SUPPORT added. It enables support for loading and unloading of ipsec.ko and tcpmd5.ko kernel modules. o IPSEC_NAT_T option was removed. Now NAT-T support is enabled by default. The UDP_ENCAP_ESPINUDP_NON_IKE encapsulation type support was removed. Added TCP/UDP checksum handling for inbound packets that were decapsulated by transport mode SAs. setkey(8) modified to show run-time NAT-T configuration of SA. o New network pseudo interface if_ipsec(4) added. For now it is build as part of ipsec.ko module (or with IPSEC kernel). It implements IPsec virtual tunnels to create route-based VPNs. o The network stack now invokes IPsec functions using special methods. The only one header file <netipsec/ipsec_support.h> should be included to declare all the needed things to work with IPsec. o All IPsec protocols handlers (ESP/AH/IPCOMP protosw) were removed. Now these protocols are handled directly via IPsec methods. o TCP_SIGNATURE support was reworked to be more close to RFC. o PF_KEY SADB was reworked: - now all security associations stored in the single SPI namespace, and all SAs MUST have unique SPI. - several hash tables added to speed up lookups in SADB. - SADB now uses rmlock to protect access, and concurrent threads can do SA lookups in the same time. - many PF_KEY message handlers were reworked to reflect changes in SADB. - SADB_UPDATE message was extended to support new PF_KEY headers: SADB_X_EXT_NEW_ADDRESS_SRC and SADB_X_EXT_NEW_ADDRESS_DST. They can be used by IKE daemon to change SA addresses. o ipsecrequest and secpolicy structures were cardinally changed to avoid locking protection for ipsecrequest. Now we support only limited number (4) of bundled SAs, but they are supported for both INET and INET6. o INPCB security policy cache was introduced. Each PCB now caches used security policies to avoid SP lookup for each packet. o For inbound security policies added the mode, when the kernel does check for full history of applied IPsec transforms. o References counting rules for security policies and security associations were changed. The proper SA locking added into xform code. o xform code was also changed. Now it is possible to unregister xforms. tdb_xxx structures were changed and renamed to reflect changes in SADB/SPDB, and changed rules for locking and refcounting. Reviewed by: gnn, wblock Obtained from: Yandex LLC Relnotes: yes Sponsored by: Yandex LLC Differential Revision: https://reviews.freebsd.org/D9352
2017-02-06 08:49:57 +00:00
#if defined(IPSEC) || defined(IPSEC_SUPPORT)
&& (!IPSEC_ENABLED(ipv4) ||
IPSEC_CAPS(ipv4, m, IPSEC_CAP_OPERABLE) == 0)
ip[6]_tryforward does inbound and outbound packet firewall processing. This can lead to change of mbuf pointer (packet filter could do m_pullup(), NAT, etc). Also in case of change of destination address, tryforward can decide that packet should be handled by local system. In this case modified mbuf can be returned to the ip[6]_input(). To handle this correctly, check M_FASTFWD_OURS flag after return from ip[6]_tryforward. And if it is present, update variables that depend from mbuf pointer and skip another inbound firewall processing. No objection from: #network MFC after: 3 weeks Sponsored by: Yandex LLC Differential Revision: https://reviews.freebsd.org/D8764
2016-12-19 11:02:49 +00:00
#endif
Merge projects/ipsec into head/. Small summary ------------- o Almost all IPsec releated code was moved into sys/netipsec. o New kernel modules added: ipsec.ko and tcpmd5.ko. New kernel option IPSEC_SUPPORT added. It enables support for loading and unloading of ipsec.ko and tcpmd5.ko kernel modules. o IPSEC_NAT_T option was removed. Now NAT-T support is enabled by default. The UDP_ENCAP_ESPINUDP_NON_IKE encapsulation type support was removed. Added TCP/UDP checksum handling for inbound packets that were decapsulated by transport mode SAs. setkey(8) modified to show run-time NAT-T configuration of SA. o New network pseudo interface if_ipsec(4) added. For now it is build as part of ipsec.ko module (or with IPSEC kernel). It implements IPsec virtual tunnels to create route-based VPNs. o The network stack now invokes IPsec functions using special methods. The only one header file <netipsec/ipsec_support.h> should be included to declare all the needed things to work with IPsec. o All IPsec protocols handlers (ESP/AH/IPCOMP protosw) were removed. Now these protocols are handled directly via IPsec methods. o TCP_SIGNATURE support was reworked to be more close to RFC. o PF_KEY SADB was reworked: - now all security associations stored in the single SPI namespace, and all SAs MUST have unique SPI. - several hash tables added to speed up lookups in SADB. - SADB now uses rmlock to protect access, and concurrent threads can do SA lookups in the same time. - many PF_KEY message handlers were reworked to reflect changes in SADB. - SADB_UPDATE message was extended to support new PF_KEY headers: SADB_X_EXT_NEW_ADDRESS_SRC and SADB_X_EXT_NEW_ADDRESS_DST. They can be used by IKE daemon to change SA addresses. o ipsecrequest and secpolicy structures were cardinally changed to avoid locking protection for ipsecrequest. Now we support only limited number (4) of bundled SAs, but they are supported for both INET and INET6. o INPCB security policy cache was introduced. Each PCB now caches used security policies to avoid SP lookup for each packet. o For inbound security policies added the mode, when the kernel does check for full history of applied IPsec transforms. o References counting rules for security policies and security associations were changed. The proper SA locking added into xform code. o xform code was also changed. Now it is possible to unregister xforms. tdb_xxx structures were changed and renamed to reflect changes in SADB/SPDB, and changed rules for locking and refcounting. Reviewed by: gnn, wblock Obtained from: Yandex LLC Relnotes: yes Sponsored by: Yandex LLC Differential Revision: https://reviews.freebsd.org/D9352
2017-02-06 08:49:57 +00:00
) {
ip[6]_tryforward does inbound and outbound packet firewall processing. This can lead to change of mbuf pointer (packet filter could do m_pullup(), NAT, etc). Also in case of change of destination address, tryforward can decide that packet should be handled by local system. In this case modified mbuf can be returned to the ip[6]_input(). To handle this correctly, check M_FASTFWD_OURS flag after return from ip[6]_tryforward. And if it is present, update variables that depend from mbuf pointer and skip another inbound firewall processing. No objection from: #network MFC after: 3 weeks Sponsored by: Yandex LLC Differential Revision: https://reviews.freebsd.org/D8764
2016-12-19 11:02:49 +00:00
if ((m = ip_tryforward(m)) == NULL)
Replace the fastforward path with tryforward which does not require a sysctl and will always be on. The former split between default and fast forwarding is removed by this commit while preserving the ability to use all network stack features. Differential Revision: https://reviews.freebsd.org/D4042 Reviewed by: ae, melifaro, olivier, rwatson MFC after: 1 month Sponsored by: Rubicon Communications (Netgate)
2015-11-05 07:26:32 +00:00
return;
ip[6]_tryforward does inbound and outbound packet firewall processing. This can lead to change of mbuf pointer (packet filter could do m_pullup(), NAT, etc). Also in case of change of destination address, tryforward can decide that packet should be handled by local system. In this case modified mbuf can be returned to the ip[6]_input(). To handle this correctly, check M_FASTFWD_OURS flag after return from ip[6]_tryforward. And if it is present, update variables that depend from mbuf pointer and skip another inbound firewall processing. No objection from: #network MFC after: 3 weeks Sponsored by: Yandex LLC Differential Revision: https://reviews.freebsd.org/D8764
2016-12-19 11:02:49 +00:00
if (m->m_flags & M_FASTFWD_OURS) {
m->m_flags &= ~M_FASTFWD_OURS;
ip = mtod(m, struct ip *);
goto ours;
}
}
Merge projects/ipsec into head/. Small summary ------------- o Almost all IPsec releated code was moved into sys/netipsec. o New kernel modules added: ipsec.ko and tcpmd5.ko. New kernel option IPSEC_SUPPORT added. It enables support for loading and unloading of ipsec.ko and tcpmd5.ko kernel modules. o IPSEC_NAT_T option was removed. Now NAT-T support is enabled by default. The UDP_ENCAP_ESPINUDP_NON_IKE encapsulation type support was removed. Added TCP/UDP checksum handling for inbound packets that were decapsulated by transport mode SAs. setkey(8) modified to show run-time NAT-T configuration of SA. o New network pseudo interface if_ipsec(4) added. For now it is build as part of ipsec.ko module (or with IPSEC kernel). It implements IPsec virtual tunnels to create route-based VPNs. o The network stack now invokes IPsec functions using special methods. The only one header file <netipsec/ipsec_support.h> should be included to declare all the needed things to work with IPsec. o All IPsec protocols handlers (ESP/AH/IPCOMP protosw) were removed. Now these protocols are handled directly via IPsec methods. o TCP_SIGNATURE support was reworked to be more close to RFC. o PF_KEY SADB was reworked: - now all security associations stored in the single SPI namespace, and all SAs MUST have unique SPI. - several hash tables added to speed up lookups in SADB. - SADB now uses rmlock to protect access, and concurrent threads can do SA lookups in the same time. - many PF_KEY message handlers were reworked to reflect changes in SADB. - SADB_UPDATE message was extended to support new PF_KEY headers: SADB_X_EXT_NEW_ADDRESS_SRC and SADB_X_EXT_NEW_ADDRESS_DST. They can be used by IKE daemon to change SA addresses. o ipsecrequest and secpolicy structures were cardinally changed to avoid locking protection for ipsecrequest. Now we support only limited number (4) of bundled SAs, but they are supported for both INET and INET6. o INPCB security policy cache was introduced. Each PCB now caches used security policies to avoid SP lookup for each packet. o For inbound security policies added the mode, when the kernel does check for full history of applied IPsec transforms. o References counting rules for security policies and security associations were changed. The proper SA locking added into xform code. o xform code was also changed. Now it is possible to unregister xforms. tdb_xxx structures were changed and renamed to reflect changes in SADB/SPDB, and changed rules for locking and refcounting. Reviewed by: gnn, wblock Obtained from: Yandex LLC Relnotes: yes Sponsored by: Yandex LLC Differential Revision: https://reviews.freebsd.org/D9352
2017-02-06 08:49:57 +00:00
#if defined(IPSEC) || defined(IPSEC_SUPPORT)
add IPSEC_FILTERGIF suport for FAST_IPSEC PR: kern/51922 Submitted by: Eric Masson <e-masson@kisoft-services.com> MFC after: 1 week
2003-07-22 18:58:34 +00:00
/*
Correct comments and debug logging in ipsec to better match reality. MFC after: 3 days
2011-06-08 03:02:11 +00:00
* Bypass packet filtering for packets previously handled by IPsec.
add IPSEC_FILTERGIF suport for FAST_IPSEC PR: kern/51922 Submitted by: Eric Masson <e-masson@kisoft-services.com> MFC after: 1 week
2003-07-22 18:58:34 +00:00
*/
Merge projects/ipsec into head/. Small summary ------------- o Almost all IPsec releated code was moved into sys/netipsec. o New kernel modules added: ipsec.ko and tcpmd5.ko. New kernel option IPSEC_SUPPORT added. It enables support for loading and unloading of ipsec.ko and tcpmd5.ko kernel modules. o IPSEC_NAT_T option was removed. Now NAT-T support is enabled by default. The UDP_ENCAP_ESPINUDP_NON_IKE encapsulation type support was removed. Added TCP/UDP checksum handling for inbound packets that were decapsulated by transport mode SAs. setkey(8) modified to show run-time NAT-T configuration of SA. o New network pseudo interface if_ipsec(4) added. For now it is build as part of ipsec.ko module (or with IPSEC kernel). It implements IPsec virtual tunnels to create route-based VPNs. o The network stack now invokes IPsec functions using special methods. The only one header file <netipsec/ipsec_support.h> should be included to declare all the needed things to work with IPsec. o All IPsec protocols handlers (ESP/AH/IPCOMP protosw) were removed. Now these protocols are handled directly via IPsec methods. o TCP_SIGNATURE support was reworked to be more close to RFC. o PF_KEY SADB was reworked: - now all security associations stored in the single SPI namespace, and all SAs MUST have unique SPI. - several hash tables added to speed up lookups in SADB. - SADB now uses rmlock to protect access, and concurrent threads can do SA lookups in the same time. - many PF_KEY message handlers were reworked to reflect changes in SADB. - SADB_UPDATE message was extended to support new PF_KEY headers: SADB_X_EXT_NEW_ADDRESS_SRC and SADB_X_EXT_NEW_ADDRESS_DST. They can be used by IKE daemon to change SA addresses. o ipsecrequest and secpolicy structures were cardinally changed to avoid locking protection for ipsecrequest. Now we support only limited number (4) of bundled SAs, but they are supported for both INET and INET6. o INPCB security policy cache was introduced. Each PCB now caches used security policies to avoid SP lookup for each packet. o For inbound security policies added the mode, when the kernel does check for full history of applied IPsec transforms. o References counting rules for security policies and security associations were changed. The proper SA locking added into xform code. o xform code was also changed. Now it is possible to unregister xforms. tdb_xxx structures were changed and renamed to reflect changes in SADB/SPDB, and changed rules for locking and refcounting. Reviewed by: gnn, wblock Obtained from: Yandex LLC Relnotes: yes Sponsored by: Yandex LLC Differential Revision: https://reviews.freebsd.org/D9352
2017-02-06 08:49:57 +00:00
if (IPSEC_ENABLED(ipv4) &&
IPSEC_CAPS(ipv4, m, IPSEC_CAP_BYPASS_FILTER) != 0)
goto passin;
ip[6]_tryforward does inbound and outbound packet firewall processing. This can lead to change of mbuf pointer (packet filter could do m_pullup(), NAT, etc). Also in case of change of destination address, tryforward can decide that packet should be handled by local system. In this case modified mbuf can be returned to the ip[6]_input(). To handle this correctly, check M_FASTFWD_OURS flag after return from ip[6]_tryforward. And if it is present, update variables that depend from mbuf pointer and skip another inbound firewall processing. No objection from: #network MFC after: 3 weeks Sponsored by: Yandex LLC Differential Revision: https://reviews.freebsd.org/D8764
2016-12-19 11:02:49 +00:00
#endif
Merge projects/ipsec into head/. Small summary ------------- o Almost all IPsec releated code was moved into sys/netipsec. o New kernel modules added: ipsec.ko and tcpmd5.ko. New kernel option IPSEC_SUPPORT added. It enables support for loading and unloading of ipsec.ko and tcpmd5.ko kernel modules. o IPSEC_NAT_T option was removed. Now NAT-T support is enabled by default. The UDP_ENCAP_ESPINUDP_NON_IKE encapsulation type support was removed. Added TCP/UDP checksum handling for inbound packets that were decapsulated by transport mode SAs. setkey(8) modified to show run-time NAT-T configuration of SA. o New network pseudo interface if_ipsec(4) added. For now it is build as part of ipsec.ko module (or with IPSEC kernel). It implements IPsec virtual tunnels to create route-based VPNs. o The network stack now invokes IPsec functions using special methods. The only one header file <netipsec/ipsec_support.h> should be included to declare all the needed things to work with IPsec. o All IPsec protocols handlers (ESP/AH/IPCOMP protosw) were removed. Now these protocols are handled directly via IPsec methods. o TCP_SIGNATURE support was reworked to be more close to RFC. o PF_KEY SADB was reworked: - now all security associations stored in the single SPI namespace, and all SAs MUST have unique SPI. - several hash tables added to speed up lookups in SADB. - SADB now uses rmlock to protect access, and concurrent threads can do SA lookups in the same time. - many PF_KEY message handlers were reworked to reflect changes in SADB. - SADB_UPDATE message was extended to support new PF_KEY headers: SADB_X_EXT_NEW_ADDRESS_SRC and SADB_X_EXT_NEW_ADDRESS_DST. They can be used by IKE daemon to change SA addresses. o ipsecrequest and secpolicy structures were cardinally changed to avoid locking protection for ipsecrequest. Now we support only limited number (4) of bundled SAs, but they are supported for both INET and INET6. o INPCB security policy cache was introduced. Each PCB now caches used security policies to avoid SP lookup for each packet. o For inbound security policies added the mode, when the kernel does check for full history of applied IPsec transforms. o References counting rules for security policies and security associations were changed. The proper SA locking added into xform code. o xform code was also changed. Now it is possible to unregister xforms. tdb_xxx structures were changed and renamed to reflect changes in SADB/SPDB, and changed rules for locking and refcounting. Reviewed by: gnn, wblock Obtained from: Yandex LLC Relnotes: yes Sponsored by: Yandex LLC Differential Revision: https://reviews.freebsd.org/D9352
2017-02-06 08:49:57 +00:00
Resolve conflicts created by import.
1997-04-03 10:47:12 +00:00
/*
o update PFIL_HOOKS support to current API used by netbsd o revamp IPv4+IPv6+bridge usage to match API changes o remove pfil_head instances from protosw entries (no longer used) o add locking o bump FreeBSD version for 3rd party modules Heavy lifting by: "Max Laier" <max@love2party.net> Supported by: FreeBSD Foundation Obtained from: NetBSD (bits of pfil.h and pfil.c)
2003-09-23 17:54:04 +00:00
* Run through list of hooks for input packets.
pfil hooks can modify packet contents so check if the destination address has been changed when PFIL_HOOKS is enabled and, if it has, arrange for the proper action by ip*_forward. Supported by: FreeBSD Foundation Submitted by: Pyun YongHyeon
2003-10-16 16:25:25 +00:00
*
* NB: Beware of the destination address changing (e.g.
* by NAT rewriting). When this happens, tell
* ip_forward to do the right thing.
Resolve conflicts created by import.
1997-04-03 10:47:12 +00:00
*/
Always compile PFIL_HOOKS into the kernel and remove the associated kernel compile option. All FreeBSD packet filters now use the PFIL_HOOKS API and thus it becomes a standard part of the network stack. If no hooks are connected the entire packet filter hooks section and related activities are jumped over. This removes any performance impact if no hooks are active. Both OpenBSD and DragonFlyBSD have integrated PFIL_HOOKS permanently as well.
2004-08-27 15:16:24 +00:00
/* Jump over all PFIL processing if hooks are not active. */
Virtualize the pfil hooks so that different jails may chose different packet filters. ALso allows ipfw to be enabled on on ejail and disabled on another. In 8.0 it's a global setting. Sitting aroung in tree waiting to commit for: 2 months MFC after: 2 months
2009-10-11 05:59:43 +00:00
if (!PFIL_HOOKED(&V_inet_pfil_hook))
Always compile PFIL_HOOKS into the kernel and remove the associated kernel compile option. All FreeBSD packet filters now use the PFIL_HOOKS API and thus it becomes a standard part of the network stack. If no hooks are connected the entire packet filter hooks section and related activities are jumped over. This removes any performance impact if no hooks are active. Both OpenBSD and DragonFlyBSD have integrated PFIL_HOOKS permanently as well.
2004-08-27 15:16:24 +00:00
goto passin;
pfil hooks can modify packet contents so check if the destination address has been changed when PFIL_HOOKS is enabled and, if it has, arrange for the proper action by ip*_forward. Supported by: FreeBSD Foundation Submitted by: Pyun YongHyeon
2003-10-16 16:25:25 +00:00
odst = ip->ip_dst;
Virtualize the pfil hooks so that different jails may chose different packet filters. ALso allows ipfw to be enabled on on ejail and disabled on another. In 8.0 it's a global setting. Sitting aroung in tree waiting to commit for: 2 months MFC after: 2 months
2009-10-11 05:59:43 +00:00
if (pfil_run_hooks(&V_inet_pfil_hook, &m, ifp, PFIL_IN, NULL) != 0)
o update PFIL_HOOKS support to current API used by netbsd o revamp IPv4+IPv6+bridge usage to match API changes o remove pfil_head instances from protosw entries (no longer used) o add locking o bump FreeBSD version for 3rd party modules Heavy lifting by: "Max Laier" <max@love2party.net> Supported by: FreeBSD Foundation Obtained from: NetBSD (bits of pfil.h and pfil.c)
2003-09-23 17:54:04 +00:00
return;
if (m == NULL) /* consumed by filter */
return;
Convert ipfw to use PFIL_HOOKS. This is change is transparent to userland and preserves the ipfw ABI. The ipfw core packet inspection and filtering functions have not been changed, only how ipfw is invoked is different. However there are many changes how ipfw is and its add-on's are handled: In general ipfw is now called through the PFIL_HOOKS and most associated magic, that was in ip_input() or ip_output() previously, is now done in ipfw_check_[in|out]() in the ipfw PFIL handler. IPDIVERT is entirely handled within the ipfw PFIL handlers. A packet to be diverted is checked if it is fragmented, if yes, ip_reass() gets in for reassembly. If not, or all fragments arrived and the packet is complete, divert_packet is called directly. For 'tee' no reassembly attempt is made and a copy of the packet is sent to the divert socket unmodified. The original packet continues its way through ip_input/output(). ipfw 'forward' is done via m_tag's. The ipfw PFIL handlers tag the packet with the new destination sockaddr_in. A check if the new destination is a local IP address is made and the m_flags are set appropriately. ip_input() and ip_output() have some more work to do here. For ip_input() the m_flags are checked and a packet for us is directly sent to the 'ours' section for further processing. Destination changes on the input path are only tagged and the 'srcrt' flag to ip_forward() is set to disable destination checks and ICMP replies at this stage. The tag is going to be handled on output. ip_output() again checks for m_flags and the 'ours' tag. If found, the packet will be dropped back to the IP netisr where it is going to be picked up by ip_input() again and the directly sent to the 'ours' section. When only the destination changes, the route's 'dst' is overwritten with the new destination from the forward m_tag. Then it jumps back at the route lookup again and skips the firewall check because it has been marked with M_SKIP_FIREWALL. ipfw 'forward' has to be compiled into the kernel with 'option IPFIREWALL_FORWARD' to enable it. DUMMYNET is entirely handled within the ipfw PFIL handlers. A packet for a dummynet pipe or queue is directly sent to dummynet_io(). Dummynet will then inject it back into ip_input/ip_output() after it has served its time. Dummynet packets are tagged and will continue from the next rule when they hit the ipfw PFIL handlers again after re-injection. BRIDGING and IPFW_ETHER are not changed yet and use ipfw_chk() directly as they did before. Later this will be changed to dedicated ETHER PFIL_HOOKS. More detailed changes to the code: conf/files Add netinet/ip_fw_pfil.c. conf/options Add IPFIREWALL_FORWARD option. modules/ipfw/Makefile Add ip_fw_pfil.c. net/bridge.c Disable PFIL_HOOKS if ipfw for bridging is active. Bridging ipfw is still directly invoked to handle layer2 headers and packets would get a double ipfw when run through PFIL_HOOKS as well. netinet/ip_divert.c Removed divert_clone() function. It is no longer used. netinet/ip_dummynet.[ch] Neither the route 'ro' nor the destination 'dst' need to be stored while in dummynet transit. Structure members and associated macros are removed. netinet/ip_fastfwd.c Removed all direct ipfw handling code and replace it with the new 'ipfw forward' handling code. netinet/ip_fw.h Removed 'ro' and 'dst' from struct ip_fw_args. netinet/ip_fw2.c (Re)moved some global variables and the module handling. netinet/ip_fw_pfil.c New file containing the ipfw PFIL handlers and module initialization. netinet/ip_input.c Removed all direct ipfw handling code and replace it with the new 'ipfw forward' handling code. ip_forward() does not longer require the 'next_hop' struct sockaddr_in argument. Disable early checks if 'srcrt' is set. netinet/ip_output.c Removed all direct ipfw handling code and replace it with the new 'ipfw forward' handling code. netinet/ip_var.h Add ip_reass() as general function. (Used from ipfw PFIL handlers for IPDIVERT.) netinet/raw_ip.c Directly check if ipfw and dummynet control pointers are active. netinet/tcp_input.c Rework the 'ipfw forward' to local code to work with the new way of forward tags. netinet/tcp_sack.c Remove include 'opt_ipfw.h' which is not needed here. sys/mbuf.h Remove m_claim_next() macro which was exclusively for ipfw 'forward' and is no longer needed. Approved by: re (scottl)
2004-08-17 22:05:54 +00:00
o update PFIL_HOOKS support to current API used by netbsd o revamp IPv4+IPv6+bridge usage to match API changes o remove pfil_head instances from protosw entries (no longer used) o add locking o bump FreeBSD version for 3rd party modules Heavy lifting by: "Max Laier" <max@love2party.net> Supported by: FreeBSD Foundation Obtained from: NetBSD (bits of pfil.h and pfil.c)
2003-09-23 17:54:04 +00:00
ip = mtod(m, struct ip *);
Remove the global one-level rtcache variable and associated complex locking and rework ip_rtaddr() to do its own rtlookup. Adopt all its callers to this and make ip_output() callable with NULL rt pointer. Reviewed by: sam (mentor)
2003-11-14 21:48:57 +00:00
dchg = (odst.s_addr != ip->ip_dst.s_addr);
In ip_input(), cache the received mbuf's network interface in a local variable. Acquire the interface address list lock when iterating over the interface address list searching for a matching received broadcast address. MFC after: 2 weeks
2009-04-20 14:35:42 +00:00
ifp = m->m_pkthdr.rcvif;
Actual firewall change. 1) Firewall is not subdivided on forwarding / blocking chains anymore.Actually only one chain left-it was the blocking one. 2) LKM support.ip_fwdef.c is function pointers definition and goes into kernel along with all INET stuff.
1995-01-12 13:06:32 +00:00
Convert ipfw to use PFIL_HOOKS. This is change is transparent to userland and preserves the ipfw ABI. The ipfw core packet inspection and filtering functions have not been changed, only how ipfw is invoked is different. However there are many changes how ipfw is and its add-on's are handled: In general ipfw is now called through the PFIL_HOOKS and most associated magic, that was in ip_input() or ip_output() previously, is now done in ipfw_check_[in|out]() in the ipfw PFIL handler. IPDIVERT is entirely handled within the ipfw PFIL handlers. A packet to be diverted is checked if it is fragmented, if yes, ip_reass() gets in for reassembly. If not, or all fragments arrived and the packet is complete, divert_packet is called directly. For 'tee' no reassembly attempt is made and a copy of the packet is sent to the divert socket unmodified. The original packet continues its way through ip_input/output(). ipfw 'forward' is done via m_tag's. The ipfw PFIL handlers tag the packet with the new destination sockaddr_in. A check if the new destination is a local IP address is made and the m_flags are set appropriately. ip_input() and ip_output() have some more work to do here. For ip_input() the m_flags are checked and a packet for us is directly sent to the 'ours' section for further processing. Destination changes on the input path are only tagged and the 'srcrt' flag to ip_forward() is set to disable destination checks and ICMP replies at this stage. The tag is going to be handled on output. ip_output() again checks for m_flags and the 'ours' tag. If found, the packet will be dropped back to the IP netisr where it is going to be picked up by ip_input() again and the directly sent to the 'ours' section. When only the destination changes, the route's 'dst' is overwritten with the new destination from the forward m_tag. Then it jumps back at the route lookup again and skips the firewall check because it has been marked with M_SKIP_FIREWALL. ipfw 'forward' has to be compiled into the kernel with 'option IPFIREWALL_FORWARD' to enable it. DUMMYNET is entirely handled within the ipfw PFIL handlers. A packet for a dummynet pipe or queue is directly sent to dummynet_io(). Dummynet will then inject it back into ip_input/ip_output() after it has served its time. Dummynet packets are tagged and will continue from the next rule when they hit the ipfw PFIL handlers again after re-injection. BRIDGING and IPFW_ETHER are not changed yet and use ipfw_chk() directly as they did before. Later this will be changed to dedicated ETHER PFIL_HOOKS. More detailed changes to the code: conf/files Add netinet/ip_fw_pfil.c. conf/options Add IPFIREWALL_FORWARD option. modules/ipfw/Makefile Add ip_fw_pfil.c. net/bridge.c Disable PFIL_HOOKS if ipfw for bridging is active. Bridging ipfw is still directly invoked to handle layer2 headers and packets would get a double ipfw when run through PFIL_HOOKS as well. netinet/ip_divert.c Removed divert_clone() function. It is no longer used. netinet/ip_dummynet.[ch] Neither the route 'ro' nor the destination 'dst' need to be stored while in dummynet transit. Structure members and associated macros are removed. netinet/ip_fastfwd.c Removed all direct ipfw handling code and replace it with the new 'ipfw forward' handling code. netinet/ip_fw.h Removed 'ro' and 'dst' from struct ip_fw_args. netinet/ip_fw2.c (Re)moved some global variables and the module handling. netinet/ip_fw_pfil.c New file containing the ipfw PFIL handlers and module initialization. netinet/ip_input.c Removed all direct ipfw handling code and replace it with the new 'ipfw forward' handling code. ip_forward() does not longer require the 'next_hop' struct sockaddr_in argument. Disable early checks if 'srcrt' is set. netinet/ip_output.c Removed all direct ipfw handling code and replace it with the new 'ipfw forward' handling code. netinet/ip_var.h Add ip_reass() as general function. (Used from ipfw PFIL handlers for IPDIVERT.) netinet/raw_ip.c Directly check if ipfw and dummynet control pointers are active. netinet/tcp_input.c Rework the 'ipfw forward' to local code to work with the new way of forward tags. netinet/tcp_sack.c Remove include 'opt_ipfw.h' which is not needed here. sys/mbuf.h Remove m_claim_next() macro which was exclusively for ipfw 'forward' and is no longer needed. Approved by: re (scottl)
2004-08-17 22:05:54 +00:00
if (m->m_flags & M_FASTFWD_OURS) {
m->m_flags &= ~M_FASTFWD_OURS;
goto ours;
}
Remove the recently added sysctl variable net.pfil.forward. Instead, add protocol specific mbuf flags M_IP_NEXTHOP and M_IP6_NEXTHOP. Use them to indicate that the mbuf's chain contains the PACKET_TAG_IPFORWARD tag. And do a tag lookup only when this flag is set. Suggested by: andre
2012-11-02 01:20:55 +00:00
if (m->m_flags & M_IP_NEXTHOP) {
Do not overwrite the dchg variable. It does not cause any real issues because the variable is overwritten only when the packet is forwarded (and the variable is not used anymore). Obtained from: pfSense MFC after: 2 weeks Sponsored by: Rubicon Communications (Netgate)
2016-04-14 18:57:30 +00:00
if (m_tag_find(m, PACKET_TAG_IPFORWARD, NULL) != NULL) {
Remove the recently added sysctl variable net.pfil.forward. Instead, add protocol specific mbuf flags M_IP_NEXTHOP and M_IP6_NEXTHOP. Use them to indicate that the mbuf's chain contains the PACKET_TAG_IPFORWARD tag. And do a tag lookup only when this flag is set. Suggested by: andre
2012-11-02 01:20:55 +00:00
/*
* Directly ship the packet on. This allows
* forwarding packets originally destined to us
* to some other directly connected host.
*/
ip_forward(m, 1);
return;
}
Bring back the full packet destination manipulation for 'ipfw fwd' with the kernel compile time option: options IPFIREWALL_FORWARD_EXTENDED This option has to be specified in addition to IPFIRWALL_FORWARD. With this option even packets targeted for an IP address local to the host can be redirected. All restrictions to ensure proper behaviour for locally generated packets are turned off. Firewall rules have to be carefully crafted to make sure that things like PMTU discovery do not break. Document the two kernel options. PR: kern/71910 PR: kern/73129 MFC after: 1 week
2005-02-22 17:40:40 +00:00
}
Always compile PFIL_HOOKS into the kernel and remove the associated kernel compile option. All FreeBSD packet filters now use the PFIL_HOOKS API and thus it becomes a standard part of the network stack. If no hooks are connected the entire packet filter hooks section and related activities are jumped over. This removes any performance impact if no hooks are active. Both OpenBSD and DragonFlyBSD have integrated PFIL_HOOKS permanently as well.
2004-08-27 15:16:24 +00:00
passin:
A step in resolving mess with byte ordering for AF_INET. After this change: - All packets in NETISR_IP queue are in net byte order. - ip_input() is entered in net byte order and converts packet to host byte order right _after_ processing pfil(9) hooks. - ip_output() is entered in host byte order and converts packet to net byte order right _before_ processing pfil(9) hooks. - ip_fragment() accepts and emits packet in net byte order. - ip_forward(), ip_mloopback() use host byte order (untouched actually). - ip_fastforward() no longer modifies packet at all (except ip_ttl). - Swapping of byte order there and back removed from the following modules: pf(4), ipfw(4), enc(4), if_bridge(4). - Swapping of byte order added to ipfilter(4), based on __FreeBSD_version - __FreeBSD_version bumped. - pfil(9) manual page updated. Reviewed by: ray, luigi, eri, melifaro Tested by: glebius (LE), ray (BE)
2012-10-06 10:02:11 +00:00
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
/*
* Process options and, if not destined for us,
* ship it on. ip_dooptions returns 1 when an
* error was detected (causing an icmp message
* to be sent and the original packet to be freed).
*/
Convert ipfw to use PFIL_HOOKS. This is change is transparent to userland and preserves the ipfw ABI. The ipfw core packet inspection and filtering functions have not been changed, only how ipfw is invoked is different. However there are many changes how ipfw is and its add-on's are handled: In general ipfw is now called through the PFIL_HOOKS and most associated magic, that was in ip_input() or ip_output() previously, is now done in ipfw_check_[in|out]() in the ipfw PFIL handler. IPDIVERT is entirely handled within the ipfw PFIL handlers. A packet to be diverted is checked if it is fragmented, if yes, ip_reass() gets in for reassembly. If not, or all fragments arrived and the packet is complete, divert_packet is called directly. For 'tee' no reassembly attempt is made and a copy of the packet is sent to the divert socket unmodified. The original packet continues its way through ip_input/output(). ipfw 'forward' is done via m_tag's. The ipfw PFIL handlers tag the packet with the new destination sockaddr_in. A check if the new destination is a local IP address is made and the m_flags are set appropriately. ip_input() and ip_output() have some more work to do here. For ip_input() the m_flags are checked and a packet for us is directly sent to the 'ours' section for further processing. Destination changes on the input path are only tagged and the 'srcrt' flag to ip_forward() is set to disable destination checks and ICMP replies at this stage. The tag is going to be handled on output. ip_output() again checks for m_flags and the 'ours' tag. If found, the packet will be dropped back to the IP netisr where it is going to be picked up by ip_input() again and the directly sent to the 'ours' section. When only the destination changes, the route's 'dst' is overwritten with the new destination from the forward m_tag. Then it jumps back at the route lookup again and skips the firewall check because it has been marked with M_SKIP_FIREWALL. ipfw 'forward' has to be compiled into the kernel with 'option IPFIREWALL_FORWARD' to enable it. DUMMYNET is entirely handled within the ipfw PFIL handlers. A packet for a dummynet pipe or queue is directly sent to dummynet_io(). Dummynet will then inject it back into ip_input/ip_output() after it has served its time. Dummynet packets are tagged and will continue from the next rule when they hit the ipfw PFIL handlers again after re-injection. BRIDGING and IPFW_ETHER are not changed yet and use ipfw_chk() directly as they did before. Later this will be changed to dedicated ETHER PFIL_HOOKS. More detailed changes to the code: conf/files Add netinet/ip_fw_pfil.c. conf/options Add IPFIREWALL_FORWARD option. modules/ipfw/Makefile Add ip_fw_pfil.c. net/bridge.c Disable PFIL_HOOKS if ipfw for bridging is active. Bridging ipfw is still directly invoked to handle layer2 headers and packets would get a double ipfw when run through PFIL_HOOKS as well. netinet/ip_divert.c Removed divert_clone() function. It is no longer used. netinet/ip_dummynet.[ch] Neither the route 'ro' nor the destination 'dst' need to be stored while in dummynet transit. Structure members and associated macros are removed. netinet/ip_fastfwd.c Removed all direct ipfw handling code and replace it with the new 'ipfw forward' handling code. netinet/ip_fw.h Removed 'ro' and 'dst' from struct ip_fw_args. netinet/ip_fw2.c (Re)moved some global variables and the module handling. netinet/ip_fw_pfil.c New file containing the ipfw PFIL handlers and module initialization. netinet/ip_input.c Removed all direct ipfw handling code and replace it with the new 'ipfw forward' handling code. ip_forward() does not longer require the 'next_hop' struct sockaddr_in argument. Disable early checks if 'srcrt' is set. netinet/ip_output.c Removed all direct ipfw handling code and replace it with the new 'ipfw forward' handling code. netinet/ip_var.h Add ip_reass() as general function. (Used from ipfw PFIL handlers for IPDIVERT.) netinet/raw_ip.c Directly check if ipfw and dummynet control pointers are active. netinet/tcp_input.c Rework the 'ipfw forward' to local code to work with the new way of forward tags. netinet/tcp_sack.c Remove include 'opt_ipfw.h' which is not needed here. sys/mbuf.h Remove m_claim_next() macro which was exclusively for ipfw 'forward' and is no longer needed. Approved by: re (scottl)
2004-08-17 22:05:54 +00:00
if (hlen > sizeof (struct ip) && ip_dooptions(m, 0))
Provide a direct entry point for IP input. This actually results in a slight decrease in performance, but will lead to better performance later.
1996-02-05 20:36:02 +00:00
return;
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
Initial get-the-easy-case-working upgrade of the multicast code to something more recent than the ancient 1.2 release contained in 4.4. This code has the following advantages as compared to previous versions (culled from the README file for the SunOS release): - True multicast delivery - Configurable rate-limiting of forwarded multicast traffic on each physical interface or tunnel, using a token-bucket limiter. - Simplistic classification of packets for prioritized dropping. - Administrative scoping of multicast address ranges. - Faster detection of hosts leaving groups. - Support for multicast traceroute (code not yet available). - Support for RSVP, the Resource Reservation Protocol. What still needs to be done: - The multicast forwarder needs testing. - The multicast routing daemon needs to be ported. - Network interface drivers need to have the `#ifdef MULTICAST' goop ripped out of them. - The IGMP code should probably be bogon-tested. Some notes about the porting process: In some cases, the Berkeley people decided to incorporate functionality from later releases of the multicast code, but then had to do things differently. As a result, if you look at Deering's patches, and then look at our code, it is not always obvious whether the patch even applies. Let the reader beware. I ran ip_mroute.c through several passes of `unifdef' to get rid of useless grot, and to permanently enable the RSVP support, which we will include as standard. Ported by: Garrett Wollman Submitted by: Steve Deering and Ajit Thyagarajan (among others)
1994-09-06 22:42:31 +00:00
/* greedy RSVP, snatches any PATH packet of the RSVP protocol and no
Kernel side of 3.5 multicast routing code, based on work by Bill Fenner and other work done here. The LKM support is probably broken, but it still compiles and will be fixed later.
1995-06-13 17:51:16 +00:00
* matter if it is destined to another node, or whether it is
Initial get-the-easy-case-working upgrade of the multicast code to something more recent than the ancient 1.2 release contained in 4.4. This code has the following advantages as compared to previous versions (culled from the README file for the SunOS release): - True multicast delivery - Configurable rate-limiting of forwarded multicast traffic on each physical interface or tunnel, using a token-bucket limiter. - Simplistic classification of packets for prioritized dropping. - Administrative scoping of multicast address ranges. - Faster detection of hosts leaving groups. - Support for multicast traceroute (code not yet available). - Support for RSVP, the Resource Reservation Protocol. What still needs to be done: - The multicast forwarder needs testing. - The multicast routing daemon needs to be ported. - Network interface drivers need to have the `#ifdef MULTICAST' goop ripped out of them. - The IGMP code should probably be bogon-tested. Some notes about the porting process: In some cases, the Berkeley people decided to incorporate functionality from later releases of the multicast code, but then had to do things differently. As a result, if you look at Deering's patches, and then look at our code, it is not always obvious whether the patch even applies. Let the reader beware. I ran ip_mroute.c through several passes of `unifdef' to get rid of useless grot, and to permanently enable the RSVP support, which we will include as standard. Ported by: Garrett Wollman Submitted by: Steve Deering and Ajit Thyagarajan (among others)
1994-09-06 22:42:31 +00:00
* a multicast one, RSVP wants it! and prevents it from being forwarded
* anywhere else. Also checks if the rsvp daemon is running before
* grabbing the packet.
*/
Commit step 1 of the vimage project, (network stack) virtualization work done by Marko Zec (zec@). This is the first in a series of commits over the course of the next few weeks. Mark all uses of global variables to be virtualized with a V_ prefix. Use macros to map them back to their global names for now, so this is a NOP change only. We hope to have caught at least 85-90% of what is needed so we do not invalidate a lot of outstanding patches again. Obtained from: //depot/projects/vimage-commit2/... Reviewed by: brooks, des, ed, mav, julian, jamie, kris, rwatson, zec, ... (various people I forgot, different versions) md5 (with a bit of help) Sponsored by: NLnet Foundation, The FreeBSD Foundation X-MFC after: never V_Commit_Message_Reviewed_By: more people than the patch
2008-08-17 23:27:27 +00:00
if (V_rsvp_on && ip->ip_p==IPPROTO_RSVP)
Initial get-the-easy-case-working upgrade of the multicast code to something more recent than the ancient 1.2 release contained in 4.4. This code has the following advantages as compared to previous versions (culled from the README file for the SunOS release): - True multicast delivery - Configurable rate-limiting of forwarded multicast traffic on each physical interface or tunnel, using a token-bucket limiter. - Simplistic classification of packets for prioritized dropping. - Administrative scoping of multicast address ranges. - Faster detection of hosts leaving groups. - Support for multicast traceroute (code not yet available). - Support for RSVP, the Resource Reservation Protocol. What still needs to be done: - The multicast forwarder needs testing. - The multicast routing daemon needs to be ported. - Network interface drivers need to have the `#ifdef MULTICAST' goop ripped out of them. - The IGMP code should probably be bogon-tested. Some notes about the porting process: In some cases, the Berkeley people decided to incorporate functionality from later releases of the multicast code, but then had to do things differently. As a result, if you look at Deering's patches, and then look at our code, it is not always obvious whether the patch even applies. Let the reader beware. I ran ip_mroute.c through several passes of `unifdef' to get rid of useless grot, and to permanently enable the RSVP support, which we will include as standard. Ported by: Garrett Wollman Submitted by: Steve Deering and Ajit Thyagarajan (among others)
1994-09-06 22:42:31 +00:00
goto ours;
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
/*
* Check our list of addresses, to see if the packet is for us.
After wading in the cesspool of ip_input for an hour, I have managed to convince myself that nothing will break if we permit IP input while interface addresses are unconfigured. (At worst, they will hit some ULP's PCB scan and fail if nobody is listening.) So, remove the restriction that addresses must be configured before packets can be input. Assume that any unicast packet we receive while unconfigured is potentially ours.
1999-02-09 16:55:46 +00:00
* If we don't have any addresses, assume any unicast packet
* we receive might be for us (and let the upper layers deal
* with it).
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
*/
Commit step 1 of the vimage project, (network stack) virtualization work done by Marko Zec (zec@). This is the first in a series of commits over the course of the next few weeks. Mark all uses of global variables to be virtualized with a V_ prefix. Use macros to map them back to their global names for now, so this is a NOP change only. We hope to have caught at least 85-90% of what is needed so we do not invalidate a lot of outstanding patches again. Obtained from: //depot/projects/vimage-commit2/... Reviewed by: brooks, des, ed, mav, julian, jamie, kris, rwatson, zec, ... (various people I forgot, different versions) md5 (with a bit of help) Sponsored by: NLnet Foundation, The FreeBSD Foundation X-MFC after: never V_Commit_Message_Reviewed_By: more people than the patch
2008-08-17 23:27:27 +00:00
if (TAILQ_EMPTY(&V_in_ifaddrhead) &&
After wading in the cesspool of ip_input for an hour, I have managed to convince myself that nothing will break if we permit IP input while interface addresses are unconfigured. (At worst, they will hit some ULP's PCB scan and fail if nobody is listening.) So, remove the restriction that addresses must be configured before packets can be input. Assume that any unicast packet we receive while unconfigured is potentially ours.
1999-02-09 16:55:46 +00:00
(m->m_flags & (M_MCAST|M_BCAST)) == 0)
goto ours;
Disable interface checking when IP forwarding is engaged so that packets addressed to the interface on the other side of the box follow their historical path. Explicitly block packets sent to the loopback network sent from the outside, which is consistent with the behavior of the forwarding path between interfaces as implemented in in_canforward(). Always check the arrival interface when matching the packet destination against the interface broadcast addresses. This bug allowed TCP connections to be made to the broadcast address of an interface on the far side of the system because the M_BCAST flag was not set because the packet was unicast to the interface on the near side. This was broken when the directed broadcast code was removed from revision 1.32. If the directed broadcast code was stil present, the destination would not have been recognized as local until the packet was forwarded to the output interface and ether_output() looped a copy back to ip_input() with M_BCAST set and the receive interface set to the output interface. Optimize the order of the tests. Reviewed by: jlemon
2001-03-04 01:39:19 +00:00
/*
* Enable a consistency check between the destination address
* and the arrival interface for a unicast packet (the RFC 1122
* strong ES model) if IP forwarding is disabled and the packet
Disable interface checking for packets subject to "ipfw fwd". Chris Johnson <cjohnson@palomine.net> tested this fix in -stable.
2001-03-04 03:22:36 +00:00
* is not locally generated and the packet is not subject to
* 'ipfw fwd'.
Move the loopback net check closer to the beginning of ip_input() so that it doesn't block packets whose destination address has been translated to the loopback net by ipnat. Add warning comments about the ip_checkinterface feature.
2001-03-05 08:45:05 +00:00
*
MFS: sync the ipfw/dummynet/bridge code with the one recently merged into stable (mostly , but not only, formatting and comments changes).
2001-11-04 22:56:25 +00:00
* XXX - Checking also should be disabled if the destination
Move the loopback net check closer to the beginning of ip_input() so that it doesn't block packets whose destination address has been translated to the loopback net by ipnat. Add warning comments about the ip_checkinterface feature.
2001-03-05 08:45:05 +00:00
* address is ipnat'ed to a different interface.
*
Modify the comments to more closely resemble the English language.
2001-03-05 22:40:27 +00:00
* XXX - Checking is incompatible with IP aliases added
Move the loopback net check closer to the beginning of ip_input() so that it doesn't block packets whose destination address has been translated to the loopback net by ipnat. Add warning comments about the ip_checkinterface feature.
2001-03-05 08:45:05 +00:00
* to the loopback interface instead of the interface where
* the packets are received.
Add CARP (Common Address Redundancy Protocol), which allows multiple hosts to share an IP address, providing high availability and load balancing. Original work on CARP done by Michael Shalayeff, with many additions by Marco Pfatschbacher and Ryan McBride. FreeBSD port done solely by Max Laier. Patch by: mlaier Obtained from: OpenBSD (mickey, mcbride)
2005-02-22 13:04:05 +00:00
*
* XXX - This is the case for carp vhost IPs as well so we
* insert a workaround. If the packet got here, we already
* checked with carp_iamatch() and carp_forus().
Disable interface checking when IP forwarding is engaged so that packets addressed to the interface on the other side of the box follow their historical path. Explicitly block packets sent to the loopback network sent from the outside, which is consistent with the behavior of the forwarding path between interfaces as implemented in in_canforward(). Always check the arrival interface when matching the packet destination against the interface broadcast addresses. This bug allowed TCP connections to be made to the broadcast address of an interface on the far side of the system because the M_BCAST flag was not set because the packet was unicast to the interface on the near side. This was broken when the directed broadcast code was removed from revision 1.32. If the directed broadcast code was stil present, the destination would not have been recognized as local until the packet was forwarded to the output interface and ether_output() looped a copy back to ip_input() with M_BCAST set and the receive interface set to the output interface. Optimize the order of the tests. Reviewed by: jlemon
2001-03-04 01:39:19 +00:00
*/
Commit step 1 of the vimage project, (network stack) virtualization work done by Marko Zec (zec@). This is the first in a series of commits over the course of the next few weeks. Mark all uses of global variables to be virtualized with a V_ prefix. Use macros to map them back to their global names for now, so this is a NOP change only. We hope to have caught at least 85-90% of what is needed so we do not invalidate a lot of outstanding patches again. Obtained from: //depot/projects/vimage-commit2/... Reviewed by: brooks, des, ed, mav, julian, jamie, kris, rwatson, zec, ... (various people I forgot, different versions) md5 (with a bit of help) Sponsored by: NLnet Foundation, The FreeBSD Foundation X-MFC after: never V_Commit_Message_Reviewed_By: more people than the patch
2008-08-17 23:27:27 +00:00
checkif = V_ip_checkinterface && (V_ipforwarding == 0) &&
In ip_input(), cache the received mbuf's network interface in a local variable. Acquire the interface address list lock when iterating over the interface address list searching for a matching received broadcast address. MFC after: 2 weeks
2009-04-20 14:35:42 +00:00
ifp != NULL && ((ifp->if_flags & IFF_LOOPBACK) == 0) &&
Allow carp(4) to be loaded as a kernel module. Follow precedent set by bridge(4), lagg(4) etc. and make use of function pointers and pf_proto_register() to hook carp into the network stack. Currently, because of the uncertainty about whether the unload path is free of race condition panics, unloads are disallowed by default. Compiling with CARPMOD_CAN_UNLOAD in CFLAGS removes this anti foot shooting measure. This commit requires IP6PROTOSPACER, introduced in r211115. Reviewed by: bz, simon Approved by: ken (mentor) MFC after: 2 weeks
2010-08-11 00:51:50 +00:00
ifp->if_carp == NULL && (dchg == 0);
Disable interface checking when IP forwarding is engaged so that packets addressed to the interface on the other side of the box follow their historical path. Explicitly block packets sent to the loopback network sent from the outside, which is consistent with the behavior of the forwarding path between interfaces as implemented in in_canforward(). Always check the arrival interface when matching the packet destination against the interface broadcast addresses. This bug allowed TCP connections to be made to the broadcast address of an interface on the far side of the system because the M_BCAST flag was not set because the packet was unicast to the interface on the near side. This was broken when the directed broadcast code was removed from revision 1.32. If the directed broadcast code was stil present, the destination would not have been recognized as local until the packet was forwarded to the output interface and ether_output() looped a copy back to ip_input() with M_BCAST set and the receive interface set to the output interface. Optimize the order of the tests. Reviewed by: jlemon
2001-03-04 01:39:19 +00:00
Add a hash table that contains the list of internet addresses, and use this in place of the in_ifaddr list when appropriate. This improves performance on hosts which have a large number of IP aliases.
2001-09-29 04:34:11 +00:00
/*
* Check for exact addresses in the hash bucket.
*/
Add a new global rwlock, in_ifaddr_lock, which will synchronize use of the in_ifaddrhead and INADDR_HASH address lists. Previously, these lists were used unsynchronized as they were effectively never changed in steady state, but we've seen increasing reports of writer-writer races on very busy VPN servers as core count has gone up (and similar configurations where address lists change frequently and concurrently). For the time being, use rwlocks rather than rmlocks in order to take advantage of their better lock debugging support. As a result, we don't enable ip_input()'s read-locking of INADDR_HASH until an rmlock conversion is complete and a performance analysis has been done. This means that one class of reader-writer races still exists. MFC after: 6 weeks Reviewed by: bz
2009-06-25 11:52:33 +00:00
/* IN_IFADDR_RLOCK(); */
Convert ipfw to use PFIL_HOOKS. This is change is transparent to userland and preserves the ipfw ABI. The ipfw core packet inspection and filtering functions have not been changed, only how ipfw is invoked is different. However there are many changes how ipfw is and its add-on's are handled: In general ipfw is now called through the PFIL_HOOKS and most associated magic, that was in ip_input() or ip_output() previously, is now done in ipfw_check_[in|out]() in the ipfw PFIL handler. IPDIVERT is entirely handled within the ipfw PFIL handlers. A packet to be diverted is checked if it is fragmented, if yes, ip_reass() gets in for reassembly. If not, or all fragments arrived and the packet is complete, divert_packet is called directly. For 'tee' no reassembly attempt is made and a copy of the packet is sent to the divert socket unmodified. The original packet continues its way through ip_input/output(). ipfw 'forward' is done via m_tag's. The ipfw PFIL handlers tag the packet with the new destination sockaddr_in. A check if the new destination is a local IP address is made and the m_flags are set appropriately. ip_input() and ip_output() have some more work to do here. For ip_input() the m_flags are checked and a packet for us is directly sent to the 'ours' section for further processing. Destination changes on the input path are only tagged and the 'srcrt' flag to ip_forward() is set to disable destination checks and ICMP replies at this stage. The tag is going to be handled on output. ip_output() again checks for m_flags and the 'ours' tag. If found, the packet will be dropped back to the IP netisr where it is going to be picked up by ip_input() again and the directly sent to the 'ours' section. When only the destination changes, the route's 'dst' is overwritten with the new destination from the forward m_tag. Then it jumps back at the route lookup again and skips the firewall check because it has been marked with M_SKIP_FIREWALL. ipfw 'forward' has to be compiled into the kernel with 'option IPFIREWALL_FORWARD' to enable it. DUMMYNET is entirely handled within the ipfw PFIL handlers. A packet for a dummynet pipe or queue is directly sent to dummynet_io(). Dummynet will then inject it back into ip_input/ip_output() after it has served its time. Dummynet packets are tagged and will continue from the next rule when they hit the ipfw PFIL handlers again after re-injection. BRIDGING and IPFW_ETHER are not changed yet and use ipfw_chk() directly as they did before. Later this will be changed to dedicated ETHER PFIL_HOOKS. More detailed changes to the code: conf/files Add netinet/ip_fw_pfil.c. conf/options Add IPFIREWALL_FORWARD option. modules/ipfw/Makefile Add ip_fw_pfil.c. net/bridge.c Disable PFIL_HOOKS if ipfw for bridging is active. Bridging ipfw is still directly invoked to handle layer2 headers and packets would get a double ipfw when run through PFIL_HOOKS as well. netinet/ip_divert.c Removed divert_clone() function. It is no longer used. netinet/ip_dummynet.[ch] Neither the route 'ro' nor the destination 'dst' need to be stored while in dummynet transit. Structure members and associated macros are removed. netinet/ip_fastfwd.c Removed all direct ipfw handling code and replace it with the new 'ipfw forward' handling code. netinet/ip_fw.h Removed 'ro' and 'dst' from struct ip_fw_args. netinet/ip_fw2.c (Re)moved some global variables and the module handling. netinet/ip_fw_pfil.c New file containing the ipfw PFIL handlers and module initialization. netinet/ip_input.c Removed all direct ipfw handling code and replace it with the new 'ipfw forward' handling code. ip_forward() does not longer require the 'next_hop' struct sockaddr_in argument. Disable early checks if 'srcrt' is set. netinet/ip_output.c Removed all direct ipfw handling code and replace it with the new 'ipfw forward' handling code. netinet/ip_var.h Add ip_reass() as general function. (Used from ipfw PFIL handlers for IPDIVERT.) netinet/raw_ip.c Directly check if ipfw and dummynet control pointers are active. netinet/tcp_input.c Rework the 'ipfw forward' to local code to work with the new way of forward tags. netinet/tcp_sack.c Remove include 'opt_ipfw.h' which is not needed here. sys/mbuf.h Remove m_claim_next() macro which was exclusively for ipfw 'forward' and is no longer needed. Approved by: re (scottl)
2004-08-17 22:05:54 +00:00
LIST_FOREACH(ia, INADDR_HASH(ip->ip_dst.s_addr), ia_hash) {
Support for IPFW based transparent forwarding. Any packet that can be matched by a ipfw rule can be redirected transparently to another port or machine. Redirection to another port mostly makes sense with tcp, where a session can be set up between a proxy and an unsuspecting client. Redirection to another machine requires that the other machine also be expecting to receive the forwarded packets, as their headers will not have been modified. /sbin/ipfw must be recompiled!!! Reviewed by: Peter Wemm <peter@freebsd.org> Submitted by: Chrisy Luke <chrisy@flix.net>
1998-07-06 03:20:19 +00:00
/*
Disable interface checking when IP forwarding is engaged so that packets addressed to the interface on the other side of the box follow their historical path. Explicitly block packets sent to the loopback network sent from the outside, which is consistent with the behavior of the forwarding path between interfaces as implemented in in_canforward(). Always check the arrival interface when matching the packet destination against the interface broadcast addresses. This bug allowed TCP connections to be made to the broadcast address of an interface on the far side of the system because the M_BCAST flag was not set because the packet was unicast to the interface on the near side. This was broken when the directed broadcast code was removed from revision 1.32. If the directed broadcast code was stil present, the destination would not have been recognized as local until the packet was forwarded to the output interface and ether_output() looped a copy back to ip_input() with M_BCAST set and the receive interface set to the output interface. Optimize the order of the tests. Reviewed by: jlemon
2001-03-04 01:39:19 +00:00
* If the address matches, verify that the packet
* arrived via the correct interface if checking is
* enabled.
Support for IPFW based transparent forwarding. Any packet that can be matched by a ipfw rule can be redirected transparently to another port or machine. Redirection to another port mostly makes sense with tcp, where a session can be set up between a proxy and an unsuspecting client. Redirection to another machine requires that the other machine also be expecting to receive the forwarded packets, as their headers will not have been modified. /sbin/ipfw must be recompiled!!! Reviewed by: Peter Wemm <peter@freebsd.org> Submitted by: Chrisy Luke <chrisy@flix.net>
1998-07-06 03:20:19 +00:00
*/
Convert ipfw to use PFIL_HOOKS. This is change is transparent to userland and preserves the ipfw ABI. The ipfw core packet inspection and filtering functions have not been changed, only how ipfw is invoked is different. However there are many changes how ipfw is and its add-on's are handled: In general ipfw is now called through the PFIL_HOOKS and most associated magic, that was in ip_input() or ip_output() previously, is now done in ipfw_check_[in|out]() in the ipfw PFIL handler. IPDIVERT is entirely handled within the ipfw PFIL handlers. A packet to be diverted is checked if it is fragmented, if yes, ip_reass() gets in for reassembly. If not, or all fragments arrived and the packet is complete, divert_packet is called directly. For 'tee' no reassembly attempt is made and a copy of the packet is sent to the divert socket unmodified. The original packet continues its way through ip_input/output(). ipfw 'forward' is done via m_tag's. The ipfw PFIL handlers tag the packet with the new destination sockaddr_in. A check if the new destination is a local IP address is made and the m_flags are set appropriately. ip_input() and ip_output() have some more work to do here. For ip_input() the m_flags are checked and a packet for us is directly sent to the 'ours' section for further processing. Destination changes on the input path are only tagged and the 'srcrt' flag to ip_forward() is set to disable destination checks and ICMP replies at this stage. The tag is going to be handled on output. ip_output() again checks for m_flags and the 'ours' tag. If found, the packet will be dropped back to the IP netisr where it is going to be picked up by ip_input() again and the directly sent to the 'ours' section. When only the destination changes, the route's 'dst' is overwritten with the new destination from the forward m_tag. Then it jumps back at the route lookup again and skips the firewall check because it has been marked with M_SKIP_FIREWALL. ipfw 'forward' has to be compiled into the kernel with 'option IPFIREWALL_FORWARD' to enable it. DUMMYNET is entirely handled within the ipfw PFIL handlers. A packet for a dummynet pipe or queue is directly sent to dummynet_io(). Dummynet will then inject it back into ip_input/ip_output() after it has served its time. Dummynet packets are tagged and will continue from the next rule when they hit the ipfw PFIL handlers again after re-injection. BRIDGING and IPFW_ETHER are not changed yet and use ipfw_chk() directly as they did before. Later this will be changed to dedicated ETHER PFIL_HOOKS. More detailed changes to the code: conf/files Add netinet/ip_fw_pfil.c. conf/options Add IPFIREWALL_FORWARD option. modules/ipfw/Makefile Add ip_fw_pfil.c. net/bridge.c Disable PFIL_HOOKS if ipfw for bridging is active. Bridging ipfw is still directly invoked to handle layer2 headers and packets would get a double ipfw when run through PFIL_HOOKS as well. netinet/ip_divert.c Removed divert_clone() function. It is no longer used. netinet/ip_dummynet.[ch] Neither the route 'ro' nor the destination 'dst' need to be stored while in dummynet transit. Structure members and associated macros are removed. netinet/ip_fastfwd.c Removed all direct ipfw handling code and replace it with the new 'ipfw forward' handling code. netinet/ip_fw.h Removed 'ro' and 'dst' from struct ip_fw_args. netinet/ip_fw2.c (Re)moved some global variables and the module handling. netinet/ip_fw_pfil.c New file containing the ipfw PFIL handlers and module initialization. netinet/ip_input.c Removed all direct ipfw handling code and replace it with the new 'ipfw forward' handling code. ip_forward() does not longer require the 'next_hop' struct sockaddr_in argument. Disable early checks if 'srcrt' is set. netinet/ip_output.c Removed all direct ipfw handling code and replace it with the new 'ipfw forward' handling code. netinet/ip_var.h Add ip_reass() as general function. (Used from ipfw PFIL handlers for IPDIVERT.) netinet/raw_ip.c Directly check if ipfw and dummynet control pointers are active. netinet/tcp_input.c Rework the 'ipfw forward' to local code to work with the new way of forward tags. netinet/tcp_sack.c Remove include 'opt_ipfw.h' which is not needed here. sys/mbuf.h Remove m_claim_next() macro which was exclusively for ipfw 'forward' and is no longer needed. Approved by: re (scottl)
2004-08-17 22:05:54 +00:00
if (IA_SIN(ia)->sin_addr.s_addr == ip->ip_dst.s_addr &&
Modify most routines returning 'struct ifaddr *' to return references rather than pointers, requiring callers to properly dispose of those references. The following routines now return references: ifaddr_byindex ifa_ifwithaddr ifa_ifwithbroadaddr ifa_ifwithdstaddr ifa_ifwithnet ifaof_ifpforaddr ifa_ifwithroute ifa_ifwithroute_fib rt_getifa rt_getifa_fib IFP_TO_IA ip_rtaddr in6_ifawithifp in6ifa_ifpforlinklocal in6ifa_ifpwithaddr in6_ifadd carp_iamatch6 ip6_getdstifaddr Remove unused macro which didn't have required referencing: IFP_TO_IA6 This closes many small races in which changes to interface or address lists while an ifaddr was in use could lead to use of freed memory (etc). In a few cases, add missing if_addr_list locking required to safely acquire references. Because of a lack of deep copying support, we accept a race in which an in6_ifaddr pointed to by mbuf tags and extracted with ip6_getdstifaddr() doesn't hold a reference while in transmit. Once we have mbuf tag deep copy support, this can be fixed. Reviewed by: bz Obtained from: Apple, Inc. (portions) MFC after: 6 weeks (portions)
2009-06-23 20:19:09 +00:00
(!checkif || ia->ia_ifp == ifp)) {
- Utilize counter(9) to accumulate statistics on interface addresses. Add four counters to struct ifaddr. This kills '+=' on a variables shared between processors for every packet. - Nuke struct if_data from struct ifaddr. - In ip_input() do not put a reference on ifaddr, instead update statistics right now in place and do IN_IFADDR_RUNLOCK(). These removes atomic(9) for every packet. [1] - To properly support NET_RT_IFLISTL sysctl used by getifaddrs(3), in rtsock.c fill if_data fields using counter_u64_fetch(). - Accidentially fix bug in COMPAT_32 version of NET_RT_IFLISTL, which took if_data not from the ifaddr, but from ifaddr's ifnet. [2] Submitted by: melifaro [1], pluknet[2] Sponsored by: Netflix Sponsored by: Nginx, Inc.
2013-10-15 11:37:57 +00:00
counter_u64_add(ia->ia_ifa.ifa_ipackets, 1);
counter_u64_add(ia->ia_ifa.ifa_ibytes,
m->m_pkthdr.len);
Add a new global rwlock, in_ifaddr_lock, which will synchronize use of the in_ifaddrhead and INADDR_HASH address lists. Previously, these lists were used unsynchronized as they were effectively never changed in steady state, but we've seen increasing reports of writer-writer races on very busy VPN servers as core count has gone up (and similar configurations where address lists change frequently and concurrently). For the time being, use rwlocks rather than rmlocks in order to take advantage of their better lock debugging support. As a result, we don't enable ip_input()'s read-locking of INADDR_HASH until an rmlock conversion is complete and a performance analysis has been done. This means that one class of reader-writer races still exists. MFC after: 6 weeks Reviewed by: bz
2009-06-25 11:52:33 +00:00
/* IN_IFADDR_RUNLOCK(); */
Fix the 'fwd' option to ipfw when asked to divert to another machine. also rely less on other modules clearing static values, and clear them in a few cases we missed before. Submitted by: Matthew Reimer <mreimer@vpop.net>
1999-03-12 01:15:57 +00:00
goto ours;
Modify most routines returning 'struct ifaddr *' to return references rather than pointers, requiring callers to properly dispose of those references. The following routines now return references: ifaddr_byindex ifa_ifwithaddr ifa_ifwithbroadaddr ifa_ifwithdstaddr ifa_ifwithnet ifaof_ifpforaddr ifa_ifwithroute ifa_ifwithroute_fib rt_getifa rt_getifa_fib IFP_TO_IA ip_rtaddr in6_ifawithifp in6ifa_ifpforlinklocal in6ifa_ifpwithaddr in6_ifadd carp_iamatch6 ip6_getdstifaddr Remove unused macro which didn't have required referencing: IFP_TO_IA6 This closes many small races in which changes to interface or address lists while an ifaddr was in use could lead to use of freed memory (etc). In a few cases, add missing if_addr_list locking required to safely acquire references. Because of a lack of deep copying support, we accept a race in which an in6_ifaddr pointed to by mbuf tags and extracted with ip6_getdstifaddr() doesn't hold a reference while in transmit. Once we have mbuf tag deep copy support, this can be fixed. Reviewed by: bz Obtained from: Apple, Inc. (portions) MFC after: 6 weeks (portions)
2009-06-23 20:19:09 +00:00
}
Add a hash table that contains the list of internet addresses, and use this in place of the in_ifaddr list when appropriate. This improves performance on hosts which have a large number of IP aliases.
2001-09-29 04:34:11 +00:00
}
Add a new global rwlock, in_ifaddr_lock, which will synchronize use of the in_ifaddrhead and INADDR_HASH address lists. Previously, these lists were used unsynchronized as they were effectively never changed in steady state, but we've seen increasing reports of writer-writer races on very busy VPN servers as core count has gone up (and similar configurations where address lists change frequently and concurrently). For the time being, use rwlocks rather than rmlocks in order to take advantage of their better lock debugging support. As a result, we don't enable ip_input()'s read-locking of INADDR_HASH until an rmlock conversion is complete and a performance analysis has been done. This means that one class of reader-writer races still exists. MFC after: 6 weeks Reviewed by: bz
2009-06-25 11:52:33 +00:00
/* IN_IFADDR_RUNLOCK(); */
Add a hash table that contains the list of internet addresses, and use this in place of the in_ifaddr list when appropriate. This improves performance on hosts which have a large number of IP aliases.
2001-09-29 04:34:11 +00:00
/*
* Check for broadcast addresses.
*
* Only accept broadcast packets that arrive via the matching
* interface. Reception of forwarded directed broadcasts would
* be handled via ip_forward() and ether_output() with the loopback
* into the stack for SIMPLEX interfaces handled by ether_output().
*/
In ip_input(), cache the received mbuf's network interface in a local variable. Acquire the interface address list lock when iterating over the interface address list searching for a matching received broadcast address. MFC after: 2 weeks
2009-04-20 14:35:42 +00:00
if (ifp != NULL && ifp->if_flags & IFF_BROADCAST) {
Convert all users of IF_ADDR_LOCK to use new locking macros that specify either a read lock or write lock. Reviewed by: bz MFC after: 2 weeks
2012-01-05 19:00:36 +00:00
IF_ADDR_RLOCK(ifp);
In ip_input(), cache the received mbuf's network interface in a local variable. Acquire the interface address list lock when iterating over the interface address list searching for a matching received broadcast address. MFC after: 2 weeks
2009-04-20 14:35:42 +00:00
TAILQ_FOREACH(ifa, &ifp->if_addrhead, ifa_link) {
Add a hash table that contains the list of internet addresses, and use this in place of the in_ifaddr list when appropriate. This improves performance on hosts which have a large number of IP aliases.
2001-09-29 04:34:11 +00:00
if (ifa->ifa_addr->sa_family != AF_INET)
continue;
ia = ifatoia(ifa);
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
if (satosin(&ia->ia_broadaddr)->sin_addr.s_addr ==
In ip_input(), cache the received mbuf's network interface in a local variable. Acquire the interface address list lock when iterating over the interface address list searching for a matching received broadcast address. MFC after: 2 weeks
2009-04-20 14:35:42 +00:00
ip->ip_dst.s_addr) {
- Utilize counter(9) to accumulate statistics on interface addresses. Add four counters to struct ifaddr. This kills '+=' on a variables shared between processors for every packet. - Nuke struct if_data from struct ifaddr. - In ip_input() do not put a reference on ifaddr, instead update statistics right now in place and do IN_IFADDR_RUNLOCK(). These removes atomic(9) for every packet. [1] - To properly support NET_RT_IFLISTL sysctl used by getifaddrs(3), in rtsock.c fill if_data fields using counter_u64_fetch(). - Accidentially fix bug in COMPAT_32 version of NET_RT_IFLISTL, which took if_data not from the ifaddr, but from ifaddr's ifnet. [2] Submitted by: melifaro [1], pluknet[2] Sponsored by: Netflix Sponsored by: Nginx, Inc.
2013-10-15 11:37:57 +00:00
counter_u64_add(ia->ia_ifa.ifa_ipackets, 1);
counter_u64_add(ia->ia_ifa.ifa_ibytes,
m->m_pkthdr.len);
Convert all users of IF_ADDR_LOCK to use new locking macros that specify either a read lock or write lock. Reviewed by: bz MFC after: 2 weeks
2012-01-05 19:00:36 +00:00
IF_ADDR_RUNLOCK(ifp);
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
goto ours;
In ip_input(), cache the received mbuf's network interface in a local variable. Acquire the interface address list lock when iterating over the interface address list searching for a matching received broadcast address. MFC after: 2 weeks
2009-04-20 14:35:42 +00:00
}
Change the following environment variables to kernel options: bootp -> BOOTP bootp.nfsroot -> BOOTP_NFSROOT bootp.nfsv3 -> BOOTP_NFSV3 bootp.compat -> BOOTP_COMPAT bootp.wired_to -> BOOTP_WIRED_TO - i.e. back out the previous commit. It's already possible to pxeboot(8) with a GENERIC kernel. Pointed out by: dwmalone
2004-07-08 22:35:36 +00:00
#ifdef BOOTP_COMPAT
In ip_input(), cache the received mbuf's network interface in a local variable. Acquire the interface address list lock when iterating over the interface address list searching for a matching received broadcast address. MFC after: 2 weeks
2009-04-20 14:35:42 +00:00
if (IA_SIN(ia)->sin_addr.s_addr == INADDR_ANY) {
- Utilize counter(9) to accumulate statistics on interface addresses. Add four counters to struct ifaddr. This kills '+=' on a variables shared between processors for every packet. - Nuke struct if_data from struct ifaddr. - In ip_input() do not put a reference on ifaddr, instead update statistics right now in place and do IN_IFADDR_RUNLOCK(). These removes atomic(9) for every packet. [1] - To properly support NET_RT_IFLISTL sysctl used by getifaddrs(3), in rtsock.c fill if_data fields using counter_u64_fetch(). - Accidentially fix bug in COMPAT_32 version of NET_RT_IFLISTL, which took if_data not from the ifaddr, but from ifaddr's ifnet. [2] Submitted by: melifaro [1], pluknet[2] Sponsored by: Netflix Sponsored by: Nginx, Inc.
2013-10-15 11:37:57 +00:00
counter_u64_add(ia->ia_ifa.ifa_ipackets, 1);
counter_u64_add(ia->ia_ifa.ifa_ibytes,
m->m_pkthdr.len);
Convert all users of IF_ADDR_LOCK to use new locking macros that specify either a read lock or write lock. Reviewed by: bz MFC after: 2 weeks
2012-01-05 19:00:36 +00:00
IF_ADDR_RUNLOCK(ifp);
Change the following environment variables to kernel options: bootp -> BOOTP bootp.nfsroot -> BOOTP_NFSROOT bootp.nfsv3 -> BOOTP_NFSV3 bootp.compat -> BOOTP_COMPAT bootp.wired_to -> BOOTP_WIRED_TO - i.e. back out the previous commit. It's already possible to pxeboot(8) with a GENERIC kernel. Pointed out by: dwmalone
2004-07-08 22:35:36 +00:00
goto ours;
In ip_input(), cache the received mbuf's network interface in a local variable. Acquire the interface address list lock when iterating over the interface address list searching for a matching received broadcast address. MFC after: 2 weeks
2009-04-20 14:35:42 +00:00
}
Change the following environment variables to kernel options: bootp -> BOOTP bootp.nfsroot -> BOOTP_NFSROOT bootp.nfsv3 -> BOOTP_NFSV3 bootp.compat -> BOOTP_COMPAT bootp.wired_to -> BOOTP_WIRED_TO - i.e. back out the previous commit. It's already possible to pxeboot(8) with a GENERIC kernel. Pointed out by: dwmalone
2004-07-08 22:35:36 +00:00
#endif
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
}
Convert all users of IF_ADDR_LOCK to use new locking macros that specify either a read lock or write lock. Reviewed by: bz MFC after: 2 weeks
2012-01-05 19:00:36 +00:00
IF_ADDR_RUNLOCK(ifp);
Clear 'ia' after iterating if_addrhead for unicast address matching: since 'ifa' was used as the TAILQ_FOREACH() iterator argument, and 'ia' was just derived form it, it could be left non-NULL which confused later conditional freeing code. This could cause kernel panics if multicast IP packets were received. [1] Call 'struct in_ifaddr *' in ip_rtaddr() 'ia', not 'ifa' in keeping with normal conventions. When 'ipstealth' is enabled returns from ip_input early, properly release the 'ia' reference. Reported by: lstewart, sam [1] MFC after: 6 weeks
2009-06-24 14:29:40 +00:00
ia = NULL;
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
}
In regular forwarding path, reject packets destined for 169.254.0.0/16 link-local addresses. See RFC 3927 section 2.7.
2007-02-03 06:45:51 +00:00
/* RFC 3927 2.7: Do not forward datagrams for 169.254.0.0/16. */
if (IN_LINKLOCAL(ntohl(ip->ip_dst.s_addr))) {
Update stats in struct ipstat using four new macros, IPSTAT_ADD(), IPSTAT_INC(), IPSTAT_SUB(), and IPSTAT_DEC(), rather than directly manipulating the fields across the kernel. This will make it easier to change the implementation of these statistics, such as using per-CPU versions of the data structures. MFC after: 3 days
2009-04-11 23:35:20 +00:00
IPSTAT_INC(ips_cantforward);
In regular forwarding path, reject packets destined for 169.254.0.0/16 link-local addresses. See RFC 3927 section 2.7.
2007-02-03 06:45:51 +00:00
m_freem(m);
return;
}
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
if (IN_MULTICAST(ntohl(ip->ip_dst.s_addr))) {
Commit step 1 of the vimage project, (network stack) virtualization work done by Marko Zec (zec@). This is the first in a series of commits over the course of the next few weeks. Mark all uses of global variables to be virtualized with a V_ prefix. Use macros to map them back to their global names for now, so this is a NOP change only. We hope to have caught at least 85-90% of what is needed so we do not invalidate a lot of outstanding patches again. Obtained from: //depot/projects/vimage-commit2/... Reviewed by: brooks, des, ed, mav, julian, jamie, kris, rwatson, zec, ... (various people I forgot, different versions) md5 (with a bit of help) Sponsored by: NLnet Foundation, The FreeBSD Foundation X-MFC after: never V_Commit_Message_Reviewed_By: more people than the patch
2008-08-17 23:27:27 +00:00
if (V_ip_mrouter) {
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
/*
* If we are acting as a multicast router, all
* incoming multicast packets are passed to the
* kernel-level multicast forwarding function.
* The packet is returned (relatively) intact; if
* ip_mforward() returns a non-zero value, the packet
* must be discarded, else it may be accepted below.
*/
In ip_input(), cache the received mbuf's network interface in a local variable. Acquire the interface address list lock when iterating over the interface address list searching for a matching received broadcast address. MFC after: 2 weeks
2009-04-20 14:35:42 +00:00
if (ip_mforward && ip_mforward(ip, ifp, m, 0) != 0) {
Update stats in struct ipstat using four new macros, IPSTAT_ADD(), IPSTAT_INC(), IPSTAT_SUB(), and IPSTAT_DEC(), rather than directly manipulating the fields across the kernel. This will make it easier to change the implementation of these statistics, such as using per-CPU versions of the data structures. MFC after: 3 days
2009-04-11 23:35:20 +00:00
IPSTAT_INC(ips_cantforward);
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
m_freem(m);
Provide a direct entry point for IP input. This actually results in a slight decrease in performance, but will lead to better performance later.
1996-02-05 20:36:02 +00:00
return;
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
}
/*
s/demon/daemon/
2002-05-12 00:22:38 +00:00
* The process-level routing daemon needs to receive
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
* all multicast IGMP packets, whether or not this
* host belongs to their destination groups.
*/
if (ip->ip_p == IPPROTO_IGMP)
goto ours;
Update stats in struct ipstat using four new macros, IPSTAT_ADD(), IPSTAT_INC(), IPSTAT_SUB(), and IPSTAT_DEC(), rather than directly manipulating the fields across the kernel. This will make it easier to change the implementation of these statistics, such as using per-CPU versions of the data structures. MFC after: 3 days
2009-04-11 23:35:20 +00:00
IPSTAT_INC(ips_forward);
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
}
/*
Merge IGMPv3 and Source-Specific Multicast (SSM) to the FreeBSD IPv4 stack. Diffs are minimized against p4. PCS has been used for some protocol verification, more widespread testing of recorded sources in Group-and-Source queries is needed. sizeof(struct igmpstat) has changed. __FreeBSD_version is bumped to 800070.
2009-03-09 17:53:05 +00:00
* Assume the packet is for us, to avoid prematurely taking
* a lock on the in_multi hash. Protocols must perform
* their own filtering and update statistics accordingly.
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
*/
goto ours;
}
if (ip->ip_dst.s_addr == (u_long)INADDR_BROADCAST)
goto ours;
if (ip->ip_dst.s_addr == INADDR_ANY)
goto ours;
/*
* Not for us; forward if possible and desirable.
*/
Commit step 1 of the vimage project, (network stack) virtualization work done by Marko Zec (zec@). This is the first in a series of commits over the course of the next few weeks. Mark all uses of global variables to be virtualized with a V_ prefix. Use macros to map them back to their global names for now, so this is a NOP change only. We hope to have caught at least 85-90% of what is needed so we do not invalidate a lot of outstanding patches again. Obtained from: //depot/projects/vimage-commit2/... Reviewed by: brooks, des, ed, mav, julian, jamie, kris, rwatson, zec, ... (various people I forgot, different versions) md5 (with a bit of help) Sponsored by: NLnet Foundation, The FreeBSD Foundation X-MFC after: never V_Commit_Message_Reviewed_By: more people than the patch
2008-08-17 23:27:27 +00:00
if (V_ipforwarding == 0) {
Update stats in struct ipstat using four new macros, IPSTAT_ADD(), IPSTAT_INC(), IPSTAT_SUB(), and IPSTAT_DEC(), rather than directly manipulating the fields across the kernel. This will make it easier to change the implementation of these statistics, such as using per-CPU versions of the data structures. MFC after: 3 days
2009-04-11 23:35:20 +00:00
IPSTAT_INC(ips_cantforward);
Backout change in 1.153, as it violate rfc1122 section 3.2.1.3. Requested by: jlemon,ru
2001-02-21 16:59:47 +00:00
m_freem(m);
Enforce inbound IPsec SPD Reviewed by: fenner
2002-02-26 02:11:13 +00:00
} else {
Convert ipfw to use PFIL_HOOKS. This is change is transparent to userland and preserves the ipfw ABI. The ipfw core packet inspection and filtering functions have not been changed, only how ipfw is invoked is different. However there are many changes how ipfw is and its add-on's are handled: In general ipfw is now called through the PFIL_HOOKS and most associated magic, that was in ip_input() or ip_output() previously, is now done in ipfw_check_[in|out]() in the ipfw PFIL handler. IPDIVERT is entirely handled within the ipfw PFIL handlers. A packet to be diverted is checked if it is fragmented, if yes, ip_reass() gets in for reassembly. If not, or all fragments arrived and the packet is complete, divert_packet is called directly. For 'tee' no reassembly attempt is made and a copy of the packet is sent to the divert socket unmodified. The original packet continues its way through ip_input/output(). ipfw 'forward' is done via m_tag's. The ipfw PFIL handlers tag the packet with the new destination sockaddr_in. A check if the new destination is a local IP address is made and the m_flags are set appropriately. ip_input() and ip_output() have some more work to do here. For ip_input() the m_flags are checked and a packet for us is directly sent to the 'ours' section for further processing. Destination changes on the input path are only tagged and the 'srcrt' flag to ip_forward() is set to disable destination checks and ICMP replies at this stage. The tag is going to be handled on output. ip_output() again checks for m_flags and the 'ours' tag. If found, the packet will be dropped back to the IP netisr where it is going to be picked up by ip_input() again and the directly sent to the 'ours' section. When only the destination changes, the route's 'dst' is overwritten with the new destination from the forward m_tag. Then it jumps back at the route lookup again and skips the firewall check because it has been marked with M_SKIP_FIREWALL. ipfw 'forward' has to be compiled into the kernel with 'option IPFIREWALL_FORWARD' to enable it. DUMMYNET is entirely handled within the ipfw PFIL handlers. A packet for a dummynet pipe or queue is directly sent to dummynet_io(). Dummynet will then inject it back into ip_input/ip_output() after it has served its time. Dummynet packets are tagged and will continue from the next rule when they hit the ipfw PFIL handlers again after re-injection. BRIDGING and IPFW_ETHER are not changed yet and use ipfw_chk() directly as they did before. Later this will be changed to dedicated ETHER PFIL_HOOKS. More detailed changes to the code: conf/files Add netinet/ip_fw_pfil.c. conf/options Add IPFIREWALL_FORWARD option. modules/ipfw/Makefile Add ip_fw_pfil.c. net/bridge.c Disable PFIL_HOOKS if ipfw for bridging is active. Bridging ipfw is still directly invoked to handle layer2 headers and packets would get a double ipfw when run through PFIL_HOOKS as well. netinet/ip_divert.c Removed divert_clone() function. It is no longer used. netinet/ip_dummynet.[ch] Neither the route 'ro' nor the destination 'dst' need to be stored while in dummynet transit. Structure members and associated macros are removed. netinet/ip_fastfwd.c Removed all direct ipfw handling code and replace it with the new 'ipfw forward' handling code. netinet/ip_fw.h Removed 'ro' and 'dst' from struct ip_fw_args. netinet/ip_fw2.c (Re)moved some global variables and the module handling. netinet/ip_fw_pfil.c New file containing the ipfw PFIL handlers and module initialization. netinet/ip_input.c Removed all direct ipfw handling code and replace it with the new 'ipfw forward' handling code. ip_forward() does not longer require the 'next_hop' struct sockaddr_in argument. Disable early checks if 'srcrt' is set. netinet/ip_output.c Removed all direct ipfw handling code and replace it with the new 'ipfw forward' handling code. netinet/ip_var.h Add ip_reass() as general function. (Used from ipfw PFIL handlers for IPDIVERT.) netinet/raw_ip.c Directly check if ipfw and dummynet control pointers are active. netinet/tcp_input.c Rework the 'ipfw forward' to local code to work with the new way of forward tags. netinet/tcp_sack.c Remove include 'opt_ipfw.h' which is not needed here. sys/mbuf.h Remove m_claim_next() macro which was exclusively for ipfw 'forward' and is no longer needed. Approved by: re (scottl)
2004-08-17 22:05:54 +00:00
ip_forward(m, dchg);
Enforce inbound IPsec SPD Reviewed by: fenner
2002-02-26 02:11:13 +00:00
}
Provide a direct entry point for IP input. This actually results in a slight decrease in performance, but will lead to better performance later.
1996-02-05 20:36:02 +00:00
return;
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
ours:
Don't reveal a router in the IPSTEALTH mode through IP options. The following steps are involved: a) the IP options related to routing (LSRR and SSRR) are processed as though the router were a host, b) the other IP options are processed as usual only if the packet is destined for the router; otherwise they are ignored. PR: kern/23123 Discussed in: freebsd-hackers
2001-12-29 09:24:18 +00:00
#ifdef IPSTEALTH
/*
* IPSTEALTH: Process non-routing options only
* if the packet is destined for us.
*/
- Utilize counter(9) to accumulate statistics on interface addresses. Add four counters to struct ifaddr. This kills '+=' on a variables shared between processors for every packet. - Nuke struct if_data from struct ifaddr. - In ip_input() do not put a reference on ifaddr, instead update statistics right now in place and do IN_IFADDR_RUNLOCK(). These removes atomic(9) for every packet. [1] - To properly support NET_RT_IFLISTL sysctl used by getifaddrs(3), in rtsock.c fill if_data fields using counter_u64_fetch(). - Accidentially fix bug in COMPAT_32 version of NET_RT_IFLISTL, which took if_data not from the ifaddr, but from ifaddr's ifnet. [2] Submitted by: melifaro [1], pluknet[2] Sponsored by: Netflix Sponsored by: Nginx, Inc.
2013-10-15 11:37:57 +00:00
if (V_ipstealth && hlen > sizeof (struct ip) && ip_dooptions(m, 1))
Don't reveal a router in the IPSTEALTH mode through IP options. The following steps are involved: a) the IP options related to routing (LSRR and SSRR) are processed as though the router were a host, b) the other IP options are processed as usual only if the packet is destined for the router; otherwise they are ignored. PR: kern/23123 Discussed in: freebsd-hackers
2001-12-29 09:24:18 +00:00
return;
#endif /* IPSTEALTH */
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
/*
o Move all parts of the IP reassembly process into the function ip_reass() to make it fully self-contained. o ip_reass() now returns a new mbuf with the reassembled packet and ip->ip_len including the IP header. o Computation of the delayed checksum is moved into divert_packet(). Reviewed by: silby
2004-08-03 12:31:38 +00:00
* Attempt reassembly; if it succeeds, proceed.
* ip_reass() will return a different mbuf.
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
*/
Switch the entire IPv4 stack to keep the IP packet header in network byte order. Any host byte order processing is done in local variables and host byte order values are never[1] written to a packet. After this change a packet processed by the stack isn't modified at all[2] except for TTL. After this change a network stack hacker doesn't need to scratch his head trying to figure out what is the byte order at the given place in the stack. [1] One exception still remains. The raw sockets convert host byte order before pass a packet to an application. Probably this would remain for ages for compatibility. [2] The ip_input() still subtructs header len from ip->ip_len, but this is planned to be fixed soon. Reviewed by: luigi, Maxim Dounin <mdounin mdounin.ru> Tested by: ray, Olivier Cochard-Labbe <olivier cochard.me>
2012-10-22 21:09:03 +00:00
if (ip->ip_off & htons(IP_MF | IP_OFFMASK)) {
Since both netinet/ and netinet6/ call into netipsec/ and netpfil/, the protocol specific mbuf flags are shared between them. - Move all M_FOO definitions into a single place: netinet/in6.h, to avoid future clashes. - Resolve clash between M_DECRYPTED and M_SKIP_FIREWALL which resulted in a failure of operation of IPSEC and packet filters. Thanks to Nicolas and Georgios for all the hard work on bisecting, testing and finally finding the root of the problem. PR: kern/186755 PR: kern/185876 In collaboration with: Georgios Amanakis <gamanakis gmail.com> In collaboration with: Nicolas DEFFAYET <nicolas-ml deffayet.com> Sponsored by: Nginx, Inc.
2014-03-12 14:29:08 +00:00
/* XXXGL: shouldn't we save & set m_flags? */
o Move all parts of the IP reassembly process into the function ip_reass() to make it fully self-contained. o ip_reass() now returns a new mbuf with the reassembled packet and ip->ip_len including the IP header. o Computation of the delayed checksum is moved into divert_packet(). Reviewed by: silby
2004-08-03 12:31:38 +00:00
m = ip_reass(m);
if (m == NULL)
RFC 791 says that IP_RF bit should always be zero, but nothing in the code enforces this. So, do not check for and attempt a false reassembly if only IP_RF is set. Also, removed the dead code, since we no longer use dtom() on return from ip_reass().
2000-10-26 13:14:48 +00:00
return;
ip = mtod(m, struct ip *);
/* Get the header length of the reassembled packet */
Fix two instances of variant struct definitions in sys/netinet: Remove the never completed _IP_VHL version, it has not caught on anywhere and it would make us incompatible with other BSD netstacks to retain this version. Add a CTASSERT protecting sizeof(struct ip) == 20. Don't let the size of struct ipq depend on the IPDIVERT option. This is a functional no-op commit. Approved by: re
2002-10-20 22:52:07 +00:00
hlen = ip->ip_hl << 2;
o Move all parts of the IP reassembly process into the function ip_reass() to make it fully self-contained. o ip_reass() now returns a new mbuf with the reassembled packet and ip->ip_len including the IP header. o Computation of the delayed checksum is moved into divert_packet(). Reviewed by: silby
2004-08-03 12:31:38 +00:00
}
Merge projects/ipsec into head/. Small summary ------------- o Almost all IPsec releated code was moved into sys/netipsec. o New kernel modules added: ipsec.ko and tcpmd5.ko. New kernel option IPSEC_SUPPORT added. It enables support for loading and unloading of ipsec.ko and tcpmd5.ko kernel modules. o IPSEC_NAT_T option was removed. Now NAT-T support is enabled by default. The UDP_ENCAP_ESPINUDP_NON_IKE encapsulation type support was removed. Added TCP/UDP checksum handling for inbound packets that were decapsulated by transport mode SAs. setkey(8) modified to show run-time NAT-T configuration of SA. o New network pseudo interface if_ipsec(4) added. For now it is build as part of ipsec.ko module (or with IPSEC kernel). It implements IPsec virtual tunnels to create route-based VPNs. o The network stack now invokes IPsec functions using special methods. The only one header file <netipsec/ipsec_support.h> should be included to declare all the needed things to work with IPsec. o All IPsec protocols handlers (ESP/AH/IPCOMP protosw) were removed. Now these protocols are handled directly via IPsec methods. o TCP_SIGNATURE support was reworked to be more close to RFC. o PF_KEY SADB was reworked: - now all security associations stored in the single SPI namespace, and all SAs MUST have unique SPI. - several hash tables added to speed up lookups in SADB. - SADB now uses rmlock to protect access, and concurrent threads can do SA lookups in the same time. - many PF_KEY message handlers were reworked to reflect changes in SADB. - SADB_UPDATE message was extended to support new PF_KEY headers: SADB_X_EXT_NEW_ADDRESS_SRC and SADB_X_EXT_NEW_ADDRESS_DST. They can be used by IKE daemon to change SA addresses. o ipsecrequest and secpolicy structures were cardinally changed to avoid locking protection for ipsecrequest. Now we support only limited number (4) of bundled SAs, but they are supported for both INET and INET6. o INPCB security policy cache was introduced. Each PCB now caches used security policies to avoid SP lookup for each packet. o For inbound security policies added the mode, when the kernel does check for full history of applied IPsec transforms. o References counting rules for security policies and security associations were changed. The proper SA locking added into xform code. o xform code was also changed. Now it is possible to unregister xforms. tdb_xxx structures were changed and renamed to reflect changes in SADB/SPDB, and changed rules for locking and refcounting. Reviewed by: gnn, wblock Obtained from: Yandex LLC Relnotes: yes Sponsored by: Yandex LLC Differential Revision: https://reviews.freebsd.org/D9352
2017-02-06 08:49:57 +00:00
#if defined(IPSEC) || defined(IPSEC_SUPPORT)
if (IPSEC_ENABLED(ipv4)) {
if (IPSEC_INPUT(ipv4, m, hlen, ip->ip_p) != 0)
return;
}
Commit the change from FAST_IPSEC to IPSEC. The FAST_IPSEC option is now deprecated, as well as the KAME IPsec code. What was FAST_IPSEC is now IPSEC. Approved by: re Sponsored by: Secure Computing
2007-07-03 12:13:45 +00:00
#endif /* IPSEC */
Sync with recent KAME. This work was based on kame-20010528-freebsd43-snap.tgz and some critical problem after the snap was out were fixed. There are many many changes since last KAME merge. TODO: - The definitions of SADB_* in sys/net/pfkeyv2.h are still different from RFC2407/IANA assignment because of binary compatibility issue. It should be fixed under 5-CURRENT. - ip6po_m member of struct ip6_pktopts is no longer used. But, it is still there because of binary compatibility issue. It should be removed under 5-CURRENT. Reviewed by: itojun Obtained from: KAME MFC after: 3 weeks
2001-06-11 12:39:29 +00:00
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
/*
* Switch out to protocol's input routine.
*/
Update stats in struct ipstat using four new macros, IPSTAT_ADD(), IPSTAT_INC(), IPSTAT_SUB(), and IPSTAT_DEC(), rather than directly manipulating the fields across the kernel. This will make it easier to change the implementation of these statistics, such as using per-CPU versions of the data structures. MFC after: 3 days
2009-04-11 23:35:20 +00:00
IPSTAT_INC(ips_delivered);
Convert ipfw to use PFIL_HOOKS. This is change is transparent to userland and preserves the ipfw ABI. The ipfw core packet inspection and filtering functions have not been changed, only how ipfw is invoked is different. However there are many changes how ipfw is and its add-on's are handled: In general ipfw is now called through the PFIL_HOOKS and most associated magic, that was in ip_input() or ip_output() previously, is now done in ipfw_check_[in|out]() in the ipfw PFIL handler. IPDIVERT is entirely handled within the ipfw PFIL handlers. A packet to be diverted is checked if it is fragmented, if yes, ip_reass() gets in for reassembly. If not, or all fragments arrived and the packet is complete, divert_packet is called directly. For 'tee' no reassembly attempt is made and a copy of the packet is sent to the divert socket unmodified. The original packet continues its way through ip_input/output(). ipfw 'forward' is done via m_tag's. The ipfw PFIL handlers tag the packet with the new destination sockaddr_in. A check if the new destination is a local IP address is made and the m_flags are set appropriately. ip_input() and ip_output() have some more work to do here. For ip_input() the m_flags are checked and a packet for us is directly sent to the 'ours' section for further processing. Destination changes on the input path are only tagged and the 'srcrt' flag to ip_forward() is set to disable destination checks and ICMP replies at this stage. The tag is going to be handled on output. ip_output() again checks for m_flags and the 'ours' tag. If found, the packet will be dropped back to the IP netisr where it is going to be picked up by ip_input() again and the directly sent to the 'ours' section. When only the destination changes, the route's 'dst' is overwritten with the new destination from the forward m_tag. Then it jumps back at the route lookup again and skips the firewall check because it has been marked with M_SKIP_FIREWALL. ipfw 'forward' has to be compiled into the kernel with 'option IPFIREWALL_FORWARD' to enable it. DUMMYNET is entirely handled within the ipfw PFIL handlers. A packet for a dummynet pipe or queue is directly sent to dummynet_io(). Dummynet will then inject it back into ip_input/ip_output() after it has served its time. Dummynet packets are tagged and will continue from the next rule when they hit the ipfw PFIL handlers again after re-injection. BRIDGING and IPFW_ETHER are not changed yet and use ipfw_chk() directly as they did before. Later this will be changed to dedicated ETHER PFIL_HOOKS. More detailed changes to the code: conf/files Add netinet/ip_fw_pfil.c. conf/options Add IPFIREWALL_FORWARD option. modules/ipfw/Makefile Add ip_fw_pfil.c. net/bridge.c Disable PFIL_HOOKS if ipfw for bridging is active. Bridging ipfw is still directly invoked to handle layer2 headers and packets would get a double ipfw when run through PFIL_HOOKS as well. netinet/ip_divert.c Removed divert_clone() function. It is no longer used. netinet/ip_dummynet.[ch] Neither the route 'ro' nor the destination 'dst' need to be stored while in dummynet transit. Structure members and associated macros are removed. netinet/ip_fastfwd.c Removed all direct ipfw handling code and replace it with the new 'ipfw forward' handling code. netinet/ip_fw.h Removed 'ro' and 'dst' from struct ip_fw_args. netinet/ip_fw2.c (Re)moved some global variables and the module handling. netinet/ip_fw_pfil.c New file containing the ipfw PFIL handlers and module initialization. netinet/ip_input.c Removed all direct ipfw handling code and replace it with the new 'ipfw forward' handling code. ip_forward() does not longer require the 'next_hop' struct sockaddr_in argument. Disable early checks if 'srcrt' is set. netinet/ip_output.c Removed all direct ipfw handling code and replace it with the new 'ipfw forward' handling code. netinet/ip_var.h Add ip_reass() as general function. (Used from ipfw PFIL handlers for IPDIVERT.) netinet/raw_ip.c Directly check if ipfw and dummynet control pointers are active. netinet/tcp_input.c Rework the 'ipfw forward' to local code to work with the new way of forward tags. netinet/tcp_sack.c Remove include 'opt_ipfw.h' which is not needed here. sys/mbuf.h Remove m_claim_next() macro which was exclusively for ipfw 'forward' and is no longer needed. Approved by: re (scottl)
2004-08-17 22:05:54 +00:00
Merge 'struct ip6protosw' and 'struct protosw' into one. Now we have only one protocol switch structure that is shared between ipv4 and ipv6. Phabric: D476 Reviewed by: jhb
2014-08-08 01:57:15 +00:00
(*inetsw[ip_protox[ip->ip_p]].pr_input)(&m, &hlen, ip->ip_p);
Provide a direct entry point for IP input. This actually results in a slight decrease in performance, but will lead to better performance later.
1996-02-05 20:36:02 +00:00
return;
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
bad:
m_freem(m);
Provide a direct entry point for IP input. This actually results in a slight decrease in performance, but will lead to better performance later.
1996-02-05 20:36:02 +00:00
}
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
/*
* IP timer processing;
* if a timer expires on a reassembly
* queue, discard it.
*/
void
Move universally to ANSI C function declarations, with relatively consistent style(9)-ish layout.
2007-05-10 15:58:48 +00:00
ip_slowtimo(void)
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
{
Step 1.5 of importing the network stack virtualization infrastructure from the vimage project, as per plan established at devsummit 08/08: http://wiki.freebsd.org/Image/Notes200808DevSummit Introduce INIT_VNET_*() initializer macros, VNET_FOREACH() iterator macros, and CURVNET_SET() context setting macros, all currently resolving to NOPs. Prepare for virtualization of selected SYSCTL objects by introducing a family of SYSCTL_V_*() macros, currently resolving to their global counterparts, i.e. SYSCTL_V_INT() == SYSCTL_INT(). Move selected #defines from sys/sys/vimage.h to newly introduced header files specific to virtualized subsystems (sys/net/vnet.h, sys/netinet/vinet.h etc.). All the changes are verified to have zero functional impact at this point in time by doing MD5 comparision between pre- and post-change object files(*). (*) netipsec/keysock.c did not validate depending on compile time options. Implemented by: julian, bz, brooks, zec Reviewed by: julian, bz, brooks, kris, rwatson, ... Approved by: julian (mentor) Obtained from: //depot/projects/vimage-commit2/... X-MFC after: never Sponsored by: NLnet Foundation, The FreeBSD Foundation
2008-10-02 15:37:58 +00:00
VNET_ITERATOR_DECL(vnet_iter);
Prevent overflow with fragmented packets Reviewed by: wollman
1997-09-15 23:07:01 +00:00
Reimplement and/or implement vnet list locking by replacing a mostly unused custom mutex/condvar-based sleep locks with two locks: an rwlock (for non-sleeping use) and sxlock (for sleeping use). Either acquired for read is sufficient to stabilize the vnet list, but both must be acquired for write to modify the list. Replace previous no-op read locking macros, used in various places in the stack, with actual locking to prevent race conditions. Callers must declare when they may perform unbounded sleeps or not when selecting how to lock. Refactor vnet sysinits so that the vnet list and locks are initialized before kernel modules are linked, as the kernel linker will use them for modules loaded by the boot loader. Update various consumers of these KPIs based on whether they may sleep or not. Reviewed by: bz Approved by: re (kib)
2009-07-19 14:20:53 +00:00
VNET_LIST_RLOCK_NOSLEEP();
Step 1.5 of importing the network stack virtualization infrastructure from the vimage project, as per plan established at devsummit 08/08: http://wiki.freebsd.org/Image/Notes200808DevSummit Introduce INIT_VNET_*() initializer macros, VNET_FOREACH() iterator macros, and CURVNET_SET() context setting macros, all currently resolving to NOPs. Prepare for virtualization of selected SYSCTL objects by introducing a family of SYSCTL_V_*() macros, currently resolving to their global counterparts, i.e. SYSCTL_V_INT() == SYSCTL_INT(). Move selected #defines from sys/sys/vimage.h to newly introduced header files specific to virtualized subsystems (sys/net/vnet.h, sys/netinet/vinet.h etc.). All the changes are verified to have zero functional impact at this point in time by doing MD5 comparision between pre- and post-change object files(*). (*) netipsec/keysock.c did not validate depending on compile time options. Implemented by: julian, bz, brooks, zec Reviewed by: julian, bz, brooks, kris, rwatson, ... Approved by: julian (mentor) Obtained from: //depot/projects/vimage-commit2/... X-MFC after: never Sponsored by: NLnet Foundation, The FreeBSD Foundation
2008-10-02 15:37:58 +00:00
VNET_FOREACH(vnet_iter) {
CURVNET_SET(vnet_iter);
Move all code related to IP fragment reassembly to ip_reass.c. Some function names have changed and comments are reformatted or added, but there is no functional change. Claim copyright for me and Adrian. Sponsored by: Nginx, Inc.
2015-04-10 06:02:37 +00:00
ipreass_slowtimo();
Step 1.5 of importing the network stack virtualization infrastructure from the vimage project, as per plan established at devsummit 08/08: http://wiki.freebsd.org/Image/Notes200808DevSummit Introduce INIT_VNET_*() initializer macros, VNET_FOREACH() iterator macros, and CURVNET_SET() context setting macros, all currently resolving to NOPs. Prepare for virtualization of selected SYSCTL objects by introducing a family of SYSCTL_V_*() macros, currently resolving to their global counterparts, i.e. SYSCTL_V_INT() == SYSCTL_INT(). Move selected #defines from sys/sys/vimage.h to newly introduced header files specific to virtualized subsystems (sys/net/vnet.h, sys/netinet/vinet.h etc.). All the changes are verified to have zero functional impact at this point in time by doing MD5 comparision between pre- and post-change object files(*). (*) netipsec/keysock.c did not validate depending on compile time options. Implemented by: julian, bz, brooks, zec Reviewed by: julian, bz, brooks, kris, rwatson, ... Approved by: julian (mentor) Obtained from: //depot/projects/vimage-commit2/... X-MFC after: never Sponsored by: NLnet Foundation, The FreeBSD Foundation
2008-10-02 15:37:58 +00:00
CURVNET_RESTORE();
Prevent denial of service using bogus fragmented IPv4 packets. A attacker sending a lot of bogus fragmented packets to the target (with different IPv4 identification field - ip_id), may be able to put the target machine into mbuf starvation state. By setting a upper limit on the number of reassembly queues we prevent this situation. This upper limit is controlled by the new sysctl net.inet.ip.maxfragpackets which defaults to 200, as the IPv6 case, this should be sufficient for most systmes, but you might want to increase it if you have lots of TCP sessions. I'm working on making the default value dependent on nmbclusters. If you want old behaviour (no upper limit) set this sysctl to a negative value. If you don't want to accept any fragments (not recommended) set the sysctl to 0 (zero). Obtained from: NetBSD MFC after: 1 week
2001-06-03 23:33:23 +00:00
}
Reimplement and/or implement vnet list locking by replacing a mostly unused custom mutex/condvar-based sleep locks with two locks: an rwlock (for non-sleeping use) and sxlock (for sleeping use). Either acquired for read is sufficient to stabilize the vnet list, but both must be acquired for write to modify the list. Replace previous no-op read locking macros, used in various places in the stack, with actual locking to prevent race conditions. Callers must declare when they may perform unbounded sleeps or not when selecting how to lock. Refactor vnet sysinits so that the vnet list and locks are initialized before kernel modules are linked, as the kernel linker will use them for modules loaded by the boot loader. Update various consumers of these KPIs based on whether they may sleep or not. Reviewed by: bz Approved by: re (kib)
2009-07-19 14:20:53 +00:00
VNET_LIST_RUNLOCK_NOSLEEP();
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
}
void
Move universally to ANSI C function declarations, with relatively consistent style(9)-ish layout.
2007-05-10 15:58:48 +00:00
ip_drain(void)
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
{
Step 1.5 of importing the network stack virtualization infrastructure from the vimage project, as per plan established at devsummit 08/08: http://wiki.freebsd.org/Image/Notes200808DevSummit Introduce INIT_VNET_*() initializer macros, VNET_FOREACH() iterator macros, and CURVNET_SET() context setting macros, all currently resolving to NOPs. Prepare for virtualization of selected SYSCTL objects by introducing a family of SYSCTL_V_*() macros, currently resolving to their global counterparts, i.e. SYSCTL_V_INT() == SYSCTL_INT(). Move selected #defines from sys/sys/vimage.h to newly introduced header files specific to virtualized subsystems (sys/net/vnet.h, sys/netinet/vinet.h etc.). All the changes are verified to have zero functional impact at this point in time by doing MD5 comparision between pre- and post-change object files(*). (*) netipsec/keysock.c did not validate depending on compile time options. Implemented by: julian, bz, brooks, zec Reviewed by: julian, bz, brooks, kris, rwatson, ... Approved by: julian (mentor) Obtained from: //depot/projects/vimage-commit2/... X-MFC after: never Sponsored by: NLnet Foundation, The FreeBSD Foundation
2008-10-02 15:37:58 +00:00
VNET_ITERATOR_DECL(vnet_iter);
Actually call in_rtqdrain()as was originally intended.
1995-12-19 20:46:15 +00:00
Reimplement and/or implement vnet list locking by replacing a mostly unused custom mutex/condvar-based sleep locks with two locks: an rwlock (for non-sleeping use) and sxlock (for sleeping use). Either acquired for read is sufficient to stabilize the vnet list, but both must be acquired for write to modify the list. Replace previous no-op read locking macros, used in various places in the stack, with actual locking to prevent race conditions. Callers must declare when they may perform unbounded sleeps or not when selecting how to lock. Refactor vnet sysinits so that the vnet list and locks are initialized before kernel modules are linked, as the kernel linker will use them for modules loaded by the boot loader. Update various consumers of these KPIs based on whether they may sleep or not. Reviewed by: bz Approved by: re (kib)
2009-07-19 14:20:53 +00:00
VNET_LIST_RLOCK_NOSLEEP();
Step 1.5 of importing the network stack virtualization infrastructure from the vimage project, as per plan established at devsummit 08/08: http://wiki.freebsd.org/Image/Notes200808DevSummit Introduce INIT_VNET_*() initializer macros, VNET_FOREACH() iterator macros, and CURVNET_SET() context setting macros, all currently resolving to NOPs. Prepare for virtualization of selected SYSCTL objects by introducing a family of SYSCTL_V_*() macros, currently resolving to their global counterparts, i.e. SYSCTL_V_INT() == SYSCTL_INT(). Move selected #defines from sys/sys/vimage.h to newly introduced header files specific to virtualized subsystems (sys/net/vnet.h, sys/netinet/vinet.h etc.). All the changes are verified to have zero functional impact at this point in time by doing MD5 comparision between pre- and post-change object files(*). (*) netipsec/keysock.c did not validate depending on compile time options. Implemented by: julian, bz, brooks, zec Reviewed by: julian, bz, brooks, kris, rwatson, ... Approved by: julian (mentor) Obtained from: //depot/projects/vimage-commit2/... X-MFC after: never Sponsored by: NLnet Foundation, The FreeBSD Foundation
2008-10-02 15:37:58 +00:00
VNET_FOREACH(vnet_iter) {
CURVNET_SET(vnet_iter);
Move all code related to IP fragment reassembly to ip_reass.c. Some function names have changed and comments are reformatted or added, but there is no functional change. Claim copyright for me and Adrian. Sponsored by: Nginx, Inc.
2015-04-10 06:02:37 +00:00
ipreass_drain();
Step 1.5 of importing the network stack virtualization infrastructure from the vimage project, as per plan established at devsummit 08/08: http://wiki.freebsd.org/Image/Notes200808DevSummit Introduce INIT_VNET_*() initializer macros, VNET_FOREACH() iterator macros, and CURVNET_SET() context setting macros, all currently resolving to NOPs. Prepare for virtualization of selected SYSCTL objects by introducing a family of SYSCTL_V_*() macros, currently resolving to their global counterparts, i.e. SYSCTL_V_INT() == SYSCTL_INT(). Move selected #defines from sys/sys/vimage.h to newly introduced header files specific to virtualized subsystems (sys/net/vnet.h, sys/netinet/vinet.h etc.). All the changes are verified to have zero functional impact at this point in time by doing MD5 comparision between pre- and post-change object files(*). (*) netipsec/keysock.c did not validate depending on compile time options. Implemented by: julian, bz, brooks, zec Reviewed by: julian, bz, brooks, kris, rwatson, ... Approved by: julian (mentor) Obtained from: //depot/projects/vimage-commit2/... X-MFC after: never Sponsored by: NLnet Foundation, The FreeBSD Foundation
2008-10-02 15:37:58 +00:00
CURVNET_RESTORE();
Prevent overflow with fragmented packets Reviewed by: wollman
1997-09-15 23:07:01 +00:00
}
Reimplement and/or implement vnet list locking by replacing a mostly unused custom mutex/condvar-based sleep locks with two locks: an rwlock (for non-sleeping use) and sxlock (for sleeping use). Either acquired for read is sufficient to stabilize the vnet list, but both must be acquired for write to modify the list. Replace previous no-op read locking macros, used in various places in the stack, with actual locking to prevent race conditions. Callers must declare when they may perform unbounded sleeps or not when selecting how to lock. Refactor vnet sysinits so that the vnet list and locks are initialized before kernel modules are linked, as the kernel linker will use them for modules loaded by the boot loader. Update various consumers of these KPIs based on whether they may sleep or not. Reviewed by: bz Approved by: re (kib)
2009-07-19 14:20:53 +00:00
VNET_LIST_RUNLOCK_NOSLEEP();
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
}
Support for dynamically loadable and unloadable IP protocols in the ipmux. With pr_proto_register() it has become possible to dynamically load protocols within the PF_INET domain. However the PF_INET domain has a second important structure called ip_protox[] that is derived from the 'struct protosw inetsw[]' and takes care of the de-multiplexing of the various protocols that ride on top of IP packets. The functions ipproto_[un]register() allow to dynamically adjust the ip_protox[] array mux in a consistent and easy way. To register a protocol within ip_protox[] the existence of a corresponding and matching protocol definition in inetsw[] is required. The function does not allow to overwrite an already registered protocol. The unregister function simply replaces the mux slot with the default index pointer to IPPROTO_RAW as it was previously.
2004-10-19 15:45:57 +00:00
/*
* The protocol to be inserted into ip_protox[] must be already registered
* in inetsw[], either statically or through pf_proto_register().
*/
int
MFp4 CH=183052 183053 183258: In protosw we define pr_protocol as short, while on the wire it is an uint8_t. That way we can have "internal" protocols like DIVERT, SEND or gaps for modules (PROTO_SPACER). Switch ipproto_{un,}register to accept a short protocol number(*) and do an upfront check for valid boundries. With this we also consistently report EPROTONOSUPPORT for out of bounds protocols, as we did for proto == 0. This allows a caller to not error for this case, which is especially important if we want to automatically call these from domain handling. (*) the functions have been without any in-tree consumer since the initial introducation, so this is considered save. Implement ip6proto_{un,}register() similarly to their legacy IP counter parts to allow modules to hook up dynamically. Reviewed by: philip, will MFC after: 1 week
2010-09-02 17:43:44 +00:00
ipproto_register(short ipproto)
Support for dynamically loadable and unloadable IP protocols in the ipmux. With pr_proto_register() it has become possible to dynamically load protocols within the PF_INET domain. However the PF_INET domain has a second important structure called ip_protox[] that is derived from the 'struct protosw inetsw[]' and takes care of the de-multiplexing of the various protocols that ride on top of IP packets. The functions ipproto_[un]register() allow to dynamically adjust the ip_protox[] array mux in a consistent and easy way. To register a protocol within ip_protox[] the existence of a corresponding and matching protocol definition in inetsw[] is required. The function does not allow to overwrite an already registered protocol. The unregister function simply replaces the mux slot with the default index pointer to IPPROTO_RAW as it was previously.
2004-10-19 15:45:57 +00:00
{
struct protosw *pr;
/* Sanity checks. */
MFp4 CH=183052 183053 183258: In protosw we define pr_protocol as short, while on the wire it is an uint8_t. That way we can have "internal" protocols like DIVERT, SEND or gaps for modules (PROTO_SPACER). Switch ipproto_{un,}register to accept a short protocol number(*) and do an upfront check for valid boundries. With this we also consistently report EPROTONOSUPPORT for out of bounds protocols, as we did for proto == 0. This allows a caller to not error for this case, which is especially important if we want to automatically call these from domain handling. (*) the functions have been without any in-tree consumer since the initial introducation, so this is considered save. Implement ip6proto_{un,}register() similarly to their legacy IP counter parts to allow modules to hook up dynamically. Reviewed by: philip, will MFC after: 1 week
2010-09-02 17:43:44 +00:00
if (ipproto <= 0 || ipproto >= IPPROTO_MAX)
Support for dynamically loadable and unloadable IP protocols in the ipmux. With pr_proto_register() it has become possible to dynamically load protocols within the PF_INET domain. However the PF_INET domain has a second important structure called ip_protox[] that is derived from the 'struct protosw inetsw[]' and takes care of the de-multiplexing of the various protocols that ride on top of IP packets. The functions ipproto_[un]register() allow to dynamically adjust the ip_protox[] array mux in a consistent and easy way. To register a protocol within ip_protox[] the existence of a corresponding and matching protocol definition in inetsw[] is required. The function does not allow to overwrite an already registered protocol. The unregister function simply replaces the mux slot with the default index pointer to IPPROTO_RAW as it was previously.
2004-10-19 15:45:57 +00:00
return (EPROTONOSUPPORT);
/*
* The protocol slot must not be occupied by another protocol
* already. An index pointing to IPPROTO_RAW is unused.
*/
pr = pffindproto(PF_INET, IPPROTO_RAW, SOCK_RAW);
if (pr == NULL)
return (EPFNOSUPPORT);
if (ip_protox[ipproto] != pr - inetsw) /* IPPROTO_RAW */
return (EEXIST);
/* Find the protocol position in inetsw[] and set the index. */
for (pr = inetdomain.dom_protosw;
pr < inetdomain.dom_protoswNPROTOSW; pr++) {
if (pr->pr_domain->dom_family == PF_INET &&
pr->pr_protocol && pr->pr_protocol == ipproto) {
MFp4 CH=183052 183053 183258: In protosw we define pr_protocol as short, while on the wire it is an uint8_t. That way we can have "internal" protocols like DIVERT, SEND or gaps for modules (PROTO_SPACER). Switch ipproto_{un,}register to accept a short protocol number(*) and do an upfront check for valid boundries. With this we also consistently report EPROTONOSUPPORT for out of bounds protocols, as we did for proto == 0. This allows a caller to not error for this case, which is especially important if we want to automatically call these from domain handling. (*) the functions have been without any in-tree consumer since the initial introducation, so this is considered save. Implement ip6proto_{un,}register() similarly to their legacy IP counter parts to allow modules to hook up dynamically. Reviewed by: philip, will MFC after: 1 week
2010-09-02 17:43:44 +00:00
ip_protox[pr->pr_protocol] = pr - inetsw;
return (0);
Support for dynamically loadable and unloadable IP protocols in the ipmux. With pr_proto_register() it has become possible to dynamically load protocols within the PF_INET domain. However the PF_INET domain has a second important structure called ip_protox[] that is derived from the 'struct protosw inetsw[]' and takes care of the de-multiplexing of the various protocols that ride on top of IP packets. The functions ipproto_[un]register() allow to dynamically adjust the ip_protox[] array mux in a consistent and easy way. To register a protocol within ip_protox[] the existence of a corresponding and matching protocol definition in inetsw[] is required. The function does not allow to overwrite an already registered protocol. The unregister function simply replaces the mux slot with the default index pointer to IPPROTO_RAW as it was previously.
2004-10-19 15:45:57 +00:00
}
}
return (EPROTONOSUPPORT);
}
int
MFp4 CH=183052 183053 183258: In protosw we define pr_protocol as short, while on the wire it is an uint8_t. That way we can have "internal" protocols like DIVERT, SEND or gaps for modules (PROTO_SPACER). Switch ipproto_{un,}register to accept a short protocol number(*) and do an upfront check for valid boundries. With this we also consistently report EPROTONOSUPPORT for out of bounds protocols, as we did for proto == 0. This allows a caller to not error for this case, which is especially important if we want to automatically call these from domain handling. (*) the functions have been without any in-tree consumer since the initial introducation, so this is considered save. Implement ip6proto_{un,}register() similarly to their legacy IP counter parts to allow modules to hook up dynamically. Reviewed by: philip, will MFC after: 1 week
2010-09-02 17:43:44 +00:00
ipproto_unregister(short ipproto)
Support for dynamically loadable and unloadable IP protocols in the ipmux. With pr_proto_register() it has become possible to dynamically load protocols within the PF_INET domain. However the PF_INET domain has a second important structure called ip_protox[] that is derived from the 'struct protosw inetsw[]' and takes care of the de-multiplexing of the various protocols that ride on top of IP packets. The functions ipproto_[un]register() allow to dynamically adjust the ip_protox[] array mux in a consistent and easy way. To register a protocol within ip_protox[] the existence of a corresponding and matching protocol definition in inetsw[] is required. The function does not allow to overwrite an already registered protocol. The unregister function simply replaces the mux slot with the default index pointer to IPPROTO_RAW as it was previously.
2004-10-19 15:45:57 +00:00
{
struct protosw *pr;
/* Sanity checks. */
MFp4 CH=183052 183053 183258: In protosw we define pr_protocol as short, while on the wire it is an uint8_t. That way we can have "internal" protocols like DIVERT, SEND or gaps for modules (PROTO_SPACER). Switch ipproto_{un,}register to accept a short protocol number(*) and do an upfront check for valid boundries. With this we also consistently report EPROTONOSUPPORT for out of bounds protocols, as we did for proto == 0. This allows a caller to not error for this case, which is especially important if we want to automatically call these from domain handling. (*) the functions have been without any in-tree consumer since the initial introducation, so this is considered save. Implement ip6proto_{un,}register() similarly to their legacy IP counter parts to allow modules to hook up dynamically. Reviewed by: philip, will MFC after: 1 week
2010-09-02 17:43:44 +00:00
if (ipproto <= 0 || ipproto >= IPPROTO_MAX)
Support for dynamically loadable and unloadable IP protocols in the ipmux. With pr_proto_register() it has become possible to dynamically load protocols within the PF_INET domain. However the PF_INET domain has a second important structure called ip_protox[] that is derived from the 'struct protosw inetsw[]' and takes care of the de-multiplexing of the various protocols that ride on top of IP packets. The functions ipproto_[un]register() allow to dynamically adjust the ip_protox[] array mux in a consistent and easy way. To register a protocol within ip_protox[] the existence of a corresponding and matching protocol definition in inetsw[] is required. The function does not allow to overwrite an already registered protocol. The unregister function simply replaces the mux slot with the default index pointer to IPPROTO_RAW as it was previously.
2004-10-19 15:45:57 +00:00
return (EPROTONOSUPPORT);
/* Check if the protocol was indeed registered. */
pr = pffindproto(PF_INET, IPPROTO_RAW, SOCK_RAW);
if (pr == NULL)
return (EPFNOSUPPORT);
if (ip_protox[ipproto] == pr - inetsw) /* IPPROTO_RAW */
return (ENOENT);
/* Reset the protocol slot to IPPROTO_RAW. */
ip_protox[ipproto] = pr - inetsw;
return (0);
}
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
u_char inetctlerrmap[PRC_NCMDS] = {
0, 0, 0, 0,
0, EMSGSIZE, EHOSTDOWN, EHOSTUNREACH,
EHOSTUNREACH, EHOSTUNREACH, ECONNREFUSED, ECONNREFUSED,
EMSGSIZE, EHOSTUNREACH, 0, 0,
Map icmp time exceeded responses to EHOSTUNREACH rather than 0 (no error); this makes connect act more sensibly in these cases. PR: 50839 Submitted by: Barney Wolff <barney@pit.databus.com> Patch delayed by laziness of: silby MFC after: 1 week
2003-06-17 06:21:08 +00:00
0, 0, EHOSTUNREACH, 0,
When net.inet.tcp.icmp_may_rst is enabled, report ECONNREFUSED not ENETRESET to the application as a RST would, this way we're compatible with the most applications. MFC candidate. Submitted by: Scott Renfro <scott@renfro.org> Reviewed by: Mike Silbersack <silby@silby.com>
2001-08-27 22:10:07 +00:00
ENOPROTOOPT, ECONNREFUSED
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
};
/*
* Forward a packet. If some error occurs return the sender
* an icmp packet. Note we can't always generate a meaningful
* icmp message because icmp doesn't have a large enough repertoire
* of codes and types.
*
* If not forwarding, just drop the packet. This could be confusing
* if ipforwarding was zero but some routing protocol was advancing
* us as a gateway to somewhere. However, we must let the routing
* protocol deal with that.
*
* The srcrt parameter indicates whether the packet is being forwarded
* via a source route.
*/
Convert ipfw to use PFIL_HOOKS. This is change is transparent to userland and preserves the ipfw ABI. The ipfw core packet inspection and filtering functions have not been changed, only how ipfw is invoked is different. However there are many changes how ipfw is and its add-on's are handled: In general ipfw is now called through the PFIL_HOOKS and most associated magic, that was in ip_input() or ip_output() previously, is now done in ipfw_check_[in|out]() in the ipfw PFIL handler. IPDIVERT is entirely handled within the ipfw PFIL handlers. A packet to be diverted is checked if it is fragmented, if yes, ip_reass() gets in for reassembly. If not, or all fragments arrived and the packet is complete, divert_packet is called directly. For 'tee' no reassembly attempt is made and a copy of the packet is sent to the divert socket unmodified. The original packet continues its way through ip_input/output(). ipfw 'forward' is done via m_tag's. The ipfw PFIL handlers tag the packet with the new destination sockaddr_in. A check if the new destination is a local IP address is made and the m_flags are set appropriately. ip_input() and ip_output() have some more work to do here. For ip_input() the m_flags are checked and a packet for us is directly sent to the 'ours' section for further processing. Destination changes on the input path are only tagged and the 'srcrt' flag to ip_forward() is set to disable destination checks and ICMP replies at this stage. The tag is going to be handled on output. ip_output() again checks for m_flags and the 'ours' tag. If found, the packet will be dropped back to the IP netisr where it is going to be picked up by ip_input() again and the directly sent to the 'ours' section. When only the destination changes, the route's 'dst' is overwritten with the new destination from the forward m_tag. Then it jumps back at the route lookup again and skips the firewall check because it has been marked with M_SKIP_FIREWALL. ipfw 'forward' has to be compiled into the kernel with 'option IPFIREWALL_FORWARD' to enable it. DUMMYNET is entirely handled within the ipfw PFIL handlers. A packet for a dummynet pipe or queue is directly sent to dummynet_io(). Dummynet will then inject it back into ip_input/ip_output() after it has served its time. Dummynet packets are tagged and will continue from the next rule when they hit the ipfw PFIL handlers again after re-injection. BRIDGING and IPFW_ETHER are not changed yet and use ipfw_chk() directly as they did before. Later this will be changed to dedicated ETHER PFIL_HOOKS. More detailed changes to the code: conf/files Add netinet/ip_fw_pfil.c. conf/options Add IPFIREWALL_FORWARD option. modules/ipfw/Makefile Add ip_fw_pfil.c. net/bridge.c Disable PFIL_HOOKS if ipfw for bridging is active. Bridging ipfw is still directly invoked to handle layer2 headers and packets would get a double ipfw when run through PFIL_HOOKS as well. netinet/ip_divert.c Removed divert_clone() function. It is no longer used. netinet/ip_dummynet.[ch] Neither the route 'ro' nor the destination 'dst' need to be stored while in dummynet transit. Structure members and associated macros are removed. netinet/ip_fastfwd.c Removed all direct ipfw handling code and replace it with the new 'ipfw forward' handling code. netinet/ip_fw.h Removed 'ro' and 'dst' from struct ip_fw_args. netinet/ip_fw2.c (Re)moved some global variables and the module handling. netinet/ip_fw_pfil.c New file containing the ipfw PFIL handlers and module initialization. netinet/ip_input.c Removed all direct ipfw handling code and replace it with the new 'ipfw forward' handling code. ip_forward() does not longer require the 'next_hop' struct sockaddr_in argument. Disable early checks if 'srcrt' is set. netinet/ip_output.c Removed all direct ipfw handling code and replace it with the new 'ipfw forward' handling code. netinet/ip_var.h Add ip_reass() as general function. (Used from ipfw PFIL handlers for IPDIVERT.) netinet/raw_ip.c Directly check if ipfw and dummynet control pointers are active. netinet/tcp_input.c Rework the 'ipfw forward' to local code to work with the new way of forward tags. netinet/tcp_sack.c Remove include 'opt_ipfw.h' which is not needed here. sys/mbuf.h Remove m_claim_next() macro which was exclusively for ipfw 'forward' and is no longer needed. Approved by: re (scottl)
2004-08-17 22:05:54 +00:00
void
ip_forward(struct mbuf *m, int srcrt)
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
{
Remove (almost all) global variables that were used to hold packet forwarding state ("annotations") during ip processing. The code is considerably cleaner now. The variables removed by this change are: ip_divert_cookie used by divert sockets ip_fw_fwd_addr used for transparent ip redirection last_pkt used by dynamic pipes in dummynet Removal of the first two has been done by carrying the annotations into volatile structs prepended to the mbuf chains, and adding appropriate code to add/remove annotations in the routines which make use of them, i.e. ip_input(), ip_output(), tcp_input(), bdg_forward(), ether_demux(), ether_output_frame(), div_output(). On passing, remove a bug in divert handling of fragmented packet. Now it is the fragment at offset 0 which sets the divert status of the whole packet, whereas formerly it was the last incoming fragment to decide. Removal of last_pkt required a change in the interface of ip_fw_chk() and dummynet_io(). On passing, use the same mechanism for dummynet annotations and for divert/forward annotations. option IPFIREWALL_FORWARD is effectively useless, the code to implement it is very small and is now in by default to avoid the obfuscation of conditionally compiled code. NOTES: * there is at least one global variable left, sro_fwd, in ip_output(). I am not sure if/how this can be removed. * I have deliberately avoided gratuitous style changes in this commit to avoid cluttering the diffs. Minor stule cleanup will likely be necessary * this commit only focused on the IP layer. I am sure there is a number of global variables used in the TCP and maybe UDP stack. * despite the number of files touched, there are absolutely no API's or data structures changed by this commit (except the interfaces of ip_fw_chk() and dummynet_io(), which are internal anyways), so an MFC is quite safe and unintrusive (and desirable, given the improved readability of the code). MFC after: 10 days
2002-06-22 11:51:02 +00:00
struct ip *ip = mtod(m, struct ip *);
Don't discard packets with 'Destination Unreachable' at the beginning of ip_forward(), if the IPSEC is compiled in. It is possible that there is an SPD that this packets will go through, even if there is no matching route. If not, ICMP will be sent anyway, after ip_output(). This is somewhat similar in purpose to r191621, except that one was for the packets sent from the host, while this one is for packets being forwarded by the host. Reviewed by: bz@ Sponsored by: Wheel Sp. z o.o. (http://www.wheel.pl)
2009-05-27 12:44:36 +00:00
struct in_ifaddr *ia;
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
struct mbuf *mcopy;
Avoid doing multiple route lookups for the same destination IP during forwarding ip_forward() does a route lookup for testing this packet can be sent to a known destination, it also can do another route lookup if it detects that an ICMP redirect is needed, it forgets all of this and handovers to ip_output() to do the same lookup yet again. This optimisation just does one route lookup during the forwarding path and handovers that to be considered by ip_output(). Differential Revision: https://reviews.freebsd.org/D2964 Approved by: ae, gnn(mentor) MFC after: 1 week
2015-07-02 18:10:41 +00:00
struct sockaddr_in *sin;
Convert ipfw to use PFIL_HOOKS. This is change is transparent to userland and preserves the ipfw ABI. The ipfw core packet inspection and filtering functions have not been changed, only how ipfw is invoked is different. However there are many changes how ipfw is and its add-on's are handled: In general ipfw is now called through the PFIL_HOOKS and most associated magic, that was in ip_input() or ip_output() previously, is now done in ipfw_check_[in|out]() in the ipfw PFIL handler. IPDIVERT is entirely handled within the ipfw PFIL handlers. A packet to be diverted is checked if it is fragmented, if yes, ip_reass() gets in for reassembly. If not, or all fragments arrived and the packet is complete, divert_packet is called directly. For 'tee' no reassembly attempt is made and a copy of the packet is sent to the divert socket unmodified. The original packet continues its way through ip_input/output(). ipfw 'forward' is done via m_tag's. The ipfw PFIL handlers tag the packet with the new destination sockaddr_in. A check if the new destination is a local IP address is made and the m_flags are set appropriately. ip_input() and ip_output() have some more work to do here. For ip_input() the m_flags are checked and a packet for us is directly sent to the 'ours' section for further processing. Destination changes on the input path are only tagged and the 'srcrt' flag to ip_forward() is set to disable destination checks and ICMP replies at this stage. The tag is going to be handled on output. ip_output() again checks for m_flags and the 'ours' tag. If found, the packet will be dropped back to the IP netisr where it is going to be picked up by ip_input() again and the directly sent to the 'ours' section. When only the destination changes, the route's 'dst' is overwritten with the new destination from the forward m_tag. Then it jumps back at the route lookup again and skips the firewall check because it has been marked with M_SKIP_FIREWALL. ipfw 'forward' has to be compiled into the kernel with 'option IPFIREWALL_FORWARD' to enable it. DUMMYNET is entirely handled within the ipfw PFIL handlers. A packet for a dummynet pipe or queue is directly sent to dummynet_io(). Dummynet will then inject it back into ip_input/ip_output() after it has served its time. Dummynet packets are tagged and will continue from the next rule when they hit the ipfw PFIL handlers again after re-injection. BRIDGING and IPFW_ETHER are not changed yet and use ipfw_chk() directly as they did before. Later this will be changed to dedicated ETHER PFIL_HOOKS. More detailed changes to the code: conf/files Add netinet/ip_fw_pfil.c. conf/options Add IPFIREWALL_FORWARD option. modules/ipfw/Makefile Add ip_fw_pfil.c. net/bridge.c Disable PFIL_HOOKS if ipfw for bridging is active. Bridging ipfw is still directly invoked to handle layer2 headers and packets would get a double ipfw when run through PFIL_HOOKS as well. netinet/ip_divert.c Removed divert_clone() function. It is no longer used. netinet/ip_dummynet.[ch] Neither the route 'ro' nor the destination 'dst' need to be stored while in dummynet transit. Structure members and associated macros are removed. netinet/ip_fastfwd.c Removed all direct ipfw handling code and replace it with the new 'ipfw forward' handling code. netinet/ip_fw.h Removed 'ro' and 'dst' from struct ip_fw_args. netinet/ip_fw2.c (Re)moved some global variables and the module handling. netinet/ip_fw_pfil.c New file containing the ipfw PFIL handlers and module initialization. netinet/ip_input.c Removed all direct ipfw handling code and replace it with the new 'ipfw forward' handling code. ip_forward() does not longer require the 'next_hop' struct sockaddr_in argument. Disable early checks if 'srcrt' is set. netinet/ip_output.c Removed all direct ipfw handling code and replace it with the new 'ipfw forward' handling code. netinet/ip_var.h Add ip_reass() as general function. (Used from ipfw PFIL handlers for IPDIVERT.) netinet/raw_ip.c Directly check if ipfw and dummynet control pointers are active. netinet/tcp_input.c Rework the 'ipfw forward' to local code to work with the new way of forward tags. netinet/tcp_sack.c Remove include 'opt_ipfw.h' which is not needed here. sys/mbuf.h Remove m_claim_next() macro which was exclusively for ipfw 'forward' and is no longer needed. Approved by: re (scottl)
2004-08-17 22:05:54 +00:00
struct in_addr dest;
Take the route mtu into account, if available, when sending an ICMP unreach, frag needed. Up to now we only looked at the interface MTU. Make sure to only use the minimum of the two. In case IPSEC is compiled in, loop the mtu through ip_ipsec_mtu() to avoid any further conditional maths. Without this, PMTU was broken in those cases when there was a route with a lower MTU than the MTU of the outgoing interface. PR: kern/122338 Tested by: Mark Cammidge mark peralex.com Reviewed by: silence on net@ MFC after: 2 weeks
2008-04-09 05:17:18 +00:00
struct route ro;
Pass icmp_error() the MTU argument directly instead of an interface pointer. This simplifies a couple of uses and removes some XXX workarounds.
2005-05-04 13:09:19 +00:00
int error, type = 0, code = 0, mtu = 0;
Fix ipfw fwd so that it acts as the docs say when forwarding an incoming packet to another machine. Obtained from: Vicor Production tree MFC after: 3 weeks
2001-12-28 21:21:57 +00:00
Convert ipfw to use PFIL_HOOKS. This is change is transparent to userland and preserves the ipfw ABI. The ipfw core packet inspection and filtering functions have not been changed, only how ipfw is invoked is different. However there are many changes how ipfw is and its add-on's are handled: In general ipfw is now called through the PFIL_HOOKS and most associated magic, that was in ip_input() or ip_output() previously, is now done in ipfw_check_[in|out]() in the ipfw PFIL handler. IPDIVERT is entirely handled within the ipfw PFIL handlers. A packet to be diverted is checked if it is fragmented, if yes, ip_reass() gets in for reassembly. If not, or all fragments arrived and the packet is complete, divert_packet is called directly. For 'tee' no reassembly attempt is made and a copy of the packet is sent to the divert socket unmodified. The original packet continues its way through ip_input/output(). ipfw 'forward' is done via m_tag's. The ipfw PFIL handlers tag the packet with the new destination sockaddr_in. A check if the new destination is a local IP address is made and the m_flags are set appropriately. ip_input() and ip_output() have some more work to do here. For ip_input() the m_flags are checked and a packet for us is directly sent to the 'ours' section for further processing. Destination changes on the input path are only tagged and the 'srcrt' flag to ip_forward() is set to disable destination checks and ICMP replies at this stage. The tag is going to be handled on output. ip_output() again checks for m_flags and the 'ours' tag. If found, the packet will be dropped back to the IP netisr where it is going to be picked up by ip_input() again and the directly sent to the 'ours' section. When only the destination changes, the route's 'dst' is overwritten with the new destination from the forward m_tag. Then it jumps back at the route lookup again and skips the firewall check because it has been marked with M_SKIP_FIREWALL. ipfw 'forward' has to be compiled into the kernel with 'option IPFIREWALL_FORWARD' to enable it. DUMMYNET is entirely handled within the ipfw PFIL handlers. A packet for a dummynet pipe or queue is directly sent to dummynet_io(). Dummynet will then inject it back into ip_input/ip_output() after it has served its time. Dummynet packets are tagged and will continue from the next rule when they hit the ipfw PFIL handlers again after re-injection. BRIDGING and IPFW_ETHER are not changed yet and use ipfw_chk() directly as they did before. Later this will be changed to dedicated ETHER PFIL_HOOKS. More detailed changes to the code: conf/files Add netinet/ip_fw_pfil.c. conf/options Add IPFIREWALL_FORWARD option. modules/ipfw/Makefile Add ip_fw_pfil.c. net/bridge.c Disable PFIL_HOOKS if ipfw for bridging is active. Bridging ipfw is still directly invoked to handle layer2 headers and packets would get a double ipfw when run through PFIL_HOOKS as well. netinet/ip_divert.c Removed divert_clone() function. It is no longer used. netinet/ip_dummynet.[ch] Neither the route 'ro' nor the destination 'dst' need to be stored while in dummynet transit. Structure members and associated macros are removed. netinet/ip_fastfwd.c Removed all direct ipfw handling code and replace it with the new 'ipfw forward' handling code. netinet/ip_fw.h Removed 'ro' and 'dst' from struct ip_fw_args. netinet/ip_fw2.c (Re)moved some global variables and the module handling. netinet/ip_fw_pfil.c New file containing the ipfw PFIL handlers and module initialization. netinet/ip_input.c Removed all direct ipfw handling code and replace it with the new 'ipfw forward' handling code. ip_forward() does not longer require the 'next_hop' struct sockaddr_in argument. Disable early checks if 'srcrt' is set. netinet/ip_output.c Removed all direct ipfw handling code and replace it with the new 'ipfw forward' handling code. netinet/ip_var.h Add ip_reass() as general function. (Used from ipfw PFIL handlers for IPDIVERT.) netinet/raw_ip.c Directly check if ipfw and dummynet control pointers are active. netinet/tcp_input.c Rework the 'ipfw forward' to local code to work with the new way of forward tags. netinet/tcp_sack.c Remove include 'opt_ipfw.h' which is not needed here. sys/mbuf.h Remove m_claim_next() macro which was exclusively for ipfw 'forward' and is no longer needed. Approved by: re (scottl)
2004-08-17 22:05:54 +00:00
if (m->m_flags & (M_BCAST|M_MCAST) || in_canforward(ip->ip_dst) == 0) {
Update stats in struct ipstat using four new macros, IPSTAT_ADD(), IPSTAT_INC(), IPSTAT_SUB(), and IPSTAT_DEC(), rather than directly manipulating the fields across the kernel. This will make it easier to change the implementation of these statistics, such as using per-CPU versions of the data structures. MFC after: 3 days
2009-04-11 23:35:20 +00:00
IPSTAT_INC(ips_cantforward);
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
m_freem(m);
return;
}
Merge projects/ipsec into head/. Small summary ------------- o Almost all IPsec releated code was moved into sys/netipsec. o New kernel modules added: ipsec.ko and tcpmd5.ko. New kernel option IPSEC_SUPPORT added. It enables support for loading and unloading of ipsec.ko and tcpmd5.ko kernel modules. o IPSEC_NAT_T option was removed. Now NAT-T support is enabled by default. The UDP_ENCAP_ESPINUDP_NON_IKE encapsulation type support was removed. Added TCP/UDP checksum handling for inbound packets that were decapsulated by transport mode SAs. setkey(8) modified to show run-time NAT-T configuration of SA. o New network pseudo interface if_ipsec(4) added. For now it is build as part of ipsec.ko module (or with IPSEC kernel). It implements IPsec virtual tunnels to create route-based VPNs. o The network stack now invokes IPsec functions using special methods. The only one header file <netipsec/ipsec_support.h> should be included to declare all the needed things to work with IPsec. o All IPsec protocols handlers (ESP/AH/IPCOMP protosw) were removed. Now these protocols are handled directly via IPsec methods. o TCP_SIGNATURE support was reworked to be more close to RFC. o PF_KEY SADB was reworked: - now all security associations stored in the single SPI namespace, and all SAs MUST have unique SPI. - several hash tables added to speed up lookups in SADB. - SADB now uses rmlock to protect access, and concurrent threads can do SA lookups in the same time. - many PF_KEY message handlers were reworked to reflect changes in SADB. - SADB_UPDATE message was extended to support new PF_KEY headers: SADB_X_EXT_NEW_ADDRESS_SRC and SADB_X_EXT_NEW_ADDRESS_DST. They can be used by IKE daemon to change SA addresses. o ipsecrequest and secpolicy structures were cardinally changed to avoid locking protection for ipsecrequest. Now we support only limited number (4) of bundled SAs, but they are supported for both INET and INET6. o INPCB security policy cache was introduced. Each PCB now caches used security policies to avoid SP lookup for each packet. o For inbound security policies added the mode, when the kernel does check for full history of applied IPsec transforms. o References counting rules for security policies and security associations were changed. The proper SA locking added into xform code. o xform code was also changed. Now it is possible to unregister xforms. tdb_xxx structures were changed and renamed to reflect changes in SADB/SPDB, and changed rules for locking and refcounting. Reviewed by: gnn, wblock Obtained from: Yandex LLC Relnotes: yes Sponsored by: Yandex LLC Differential Revision: https://reviews.freebsd.org/D9352
2017-02-06 08:49:57 +00:00
if (
Add support for stealth forwarding (forwarding packets without touching their ttl). This can be used - in combination with the proper ipfw incantations - to make a firewall or router invisible to traceroute and other exploration tools. This behaviour is controlled by a sysctl variable (net.inet.ip.stealth) and hidden behind a kernel option (IPSTEALTH). Reviewed by: eivind, bde
1999-02-22 18:19:57 +00:00
#ifdef IPSTEALTH
Merge projects/ipsec into head/. Small summary ------------- o Almost all IPsec releated code was moved into sys/netipsec. o New kernel modules added: ipsec.ko and tcpmd5.ko. New kernel option IPSEC_SUPPORT added. It enables support for loading and unloading of ipsec.ko and tcpmd5.ko kernel modules. o IPSEC_NAT_T option was removed. Now NAT-T support is enabled by default. The UDP_ENCAP_ESPINUDP_NON_IKE encapsulation type support was removed. Added TCP/UDP checksum handling for inbound packets that were decapsulated by transport mode SAs. setkey(8) modified to show run-time NAT-T configuration of SA. o New network pseudo interface if_ipsec(4) added. For now it is build as part of ipsec.ko module (or with IPSEC kernel). It implements IPsec virtual tunnels to create route-based VPNs. o The network stack now invokes IPsec functions using special methods. The only one header file <netipsec/ipsec_support.h> should be included to declare all the needed things to work with IPsec. o All IPsec protocols handlers (ESP/AH/IPCOMP protosw) were removed. Now these protocols are handled directly via IPsec methods. o TCP_SIGNATURE support was reworked to be more close to RFC. o PF_KEY SADB was reworked: - now all security associations stored in the single SPI namespace, and all SAs MUST have unique SPI. - several hash tables added to speed up lookups in SADB. - SADB now uses rmlock to protect access, and concurrent threads can do SA lookups in the same time. - many PF_KEY message handlers were reworked to reflect changes in SADB. - SADB_UPDATE message was extended to support new PF_KEY headers: SADB_X_EXT_NEW_ADDRESS_SRC and SADB_X_EXT_NEW_ADDRESS_DST. They can be used by IKE daemon to change SA addresses. o ipsecrequest and secpolicy structures were cardinally changed to avoid locking protection for ipsecrequest. Now we support only limited number (4) of bundled SAs, but they are supported for both INET and INET6. o INPCB security policy cache was introduced. Each PCB now caches used security policies to avoid SP lookup for each packet. o For inbound security policies added the mode, when the kernel does check for full history of applied IPsec transforms. o References counting rules for security policies and security associations were changed. The proper SA locking added into xform code. o xform code was also changed. Now it is possible to unregister xforms. tdb_xxx structures were changed and renamed to reflect changes in SADB/SPDB, and changed rules for locking and refcounting. Reviewed by: gnn, wblock Obtained from: Yandex LLC Relnotes: yes Sponsored by: Yandex LLC Differential Revision: https://reviews.freebsd.org/D9352
2017-02-06 08:49:57 +00:00
V_ipstealth == 0 &&
Add support for stealth forwarding (forwarding packets without touching their ttl). This can be used - in combination with the proper ipfw incantations - to make a firewall or router invisible to traceroute and other exploration tools. This behaviour is controlled by a sysctl variable (net.inet.ip.stealth) and hidden behind a kernel option (IPSTEALTH). Reviewed by: eivind, bde
1999-02-22 18:19:57 +00:00
#endif
Merge projects/ipsec into head/. Small summary ------------- o Almost all IPsec releated code was moved into sys/netipsec. o New kernel modules added: ipsec.ko and tcpmd5.ko. New kernel option IPSEC_SUPPORT added. It enables support for loading and unloading of ipsec.ko and tcpmd5.ko kernel modules. o IPSEC_NAT_T option was removed. Now NAT-T support is enabled by default. The UDP_ENCAP_ESPINUDP_NON_IKE encapsulation type support was removed. Added TCP/UDP checksum handling for inbound packets that were decapsulated by transport mode SAs. setkey(8) modified to show run-time NAT-T configuration of SA. o New network pseudo interface if_ipsec(4) added. For now it is build as part of ipsec.ko module (or with IPSEC kernel). It implements IPsec virtual tunnels to create route-based VPNs. o The network stack now invokes IPsec functions using special methods. The only one header file <netipsec/ipsec_support.h> should be included to declare all the needed things to work with IPsec. o All IPsec protocols handlers (ESP/AH/IPCOMP protosw) were removed. Now these protocols are handled directly via IPsec methods. o TCP_SIGNATURE support was reworked to be more close to RFC. o PF_KEY SADB was reworked: - now all security associations stored in the single SPI namespace, and all SAs MUST have unique SPI. - several hash tables added to speed up lookups in SADB. - SADB now uses rmlock to protect access, and concurrent threads can do SA lookups in the same time. - many PF_KEY message handlers were reworked to reflect changes in SADB. - SADB_UPDATE message was extended to support new PF_KEY headers: SADB_X_EXT_NEW_ADDRESS_SRC and SADB_X_EXT_NEW_ADDRESS_DST. They can be used by IKE daemon to change SA addresses. o ipsecrequest and secpolicy structures were cardinally changed to avoid locking protection for ipsecrequest. Now we support only limited number (4) of bundled SAs, but they are supported for both INET and INET6. o INPCB security policy cache was introduced. Each PCB now caches used security policies to avoid SP lookup for each packet. o For inbound security policies added the mode, when the kernel does check for full history of applied IPsec transforms. o References counting rules for security policies and security associations were changed. The proper SA locking added into xform code. o xform code was also changed. Now it is possible to unregister xforms. tdb_xxx structures were changed and renamed to reflect changes in SADB/SPDB, and changed rules for locking and refcounting. Reviewed by: gnn, wblock Obtained from: Yandex LLC Relnotes: yes Sponsored by: Yandex LLC Differential Revision: https://reviews.freebsd.org/D9352
2017-02-06 08:49:57 +00:00
ip->ip_ttl <= IPTTLDEC) {
icmp_error(m, ICMP_TIMXCEED, ICMP_TIMXCEED_INTRANS, 0, 0);
return;
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
}
Avoid doing multiple route lookups for the same destination IP during forwarding ip_forward() does a route lookup for testing this packet can be sent to a known destination, it also can do another route lookup if it detects that an ICMP redirect is needed, it forgets all of this and handovers to ip_output() to do the same lookup yet again. This optimisation just does one route lookup during the forwarding path and handovers that to be considered by ip_output(). Differential Revision: https://reviews.freebsd.org/D2964 Approved by: ae, gnn(mentor) MFC after: 1 week
2015-07-02 18:10:41 +00:00
bzero(&ro, sizeof(ro));
sin = (struct sockaddr_in *)&ro.ro_dst;
sin->sin_family = AF_INET;
sin->sin_len = sizeof(*sin);
sin->sin_addr = ip->ip_dst;
#ifdef RADIX_MPATH
rtalloc_mpath_fib(&ro,
ntohl(ip->ip_src.s_addr ^ ip->ip_dst.s_addr),
M_GETFIB(m));
#else
in_rtalloc_ign(&ro, 0, M_GETFIB(m));
#endif
if (ro.ro_rt != NULL) {
ia = ifatoia(ro.ro_rt->rt_ifa);
ifa_ref(&ia->ia_ifa);
Correct issue presented in r285051, apparently neither clang nor gcc complain about this. But clang intis the var to NULL correctly while gcc on at least mips does not. Correct the undefined behavior by initializing the variable properly. PR: 201371 Differential Revision: https://reviews.freebsd.org/D3036 Reviewed by: gnn Approved by: gnn(mentor)
2015-07-09 16:28:36 +00:00
} else
ia = NULL;
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
/*
It was possible for ip_forward() to supply to icmp_error() an IP header with ip_len in network byte order. For certain values of ip_len, this could cause icmp_error() to write beyond the end of an mbuf, causing mbuf free-list corruption. This problem was observed during generation of ICMP redirects. We now make quite sure that the copy of the IP header kept for icmp_error() is stored in a non-shared mbuf header so that it will not be modified by ip_output(). Also: - Calculate the correct number of bytes that need to be retained for icmp_error(), instead of assuming that 64 is enough (it's not). - In icmp_error(), use m_copydata instead of bcopy() to copy from the supplied mbuf chain, in case the first 8 bytes of IP payload are not stored directly after the IP header. - Sanity-check ip_len in icmp_error(), and panic if it is less than sizeof(struct ip). Incoming packets with bad ip_len values are discarded in ip_input(), so this should only be triggered by bugs in the code, not by bad packets. This patch results from code and suggestions from Ruslan, Bosko, Jonathan Lemon and Matt Dillon, with important testing by Mike Tancsa, who could reproduce this problem at will. Reported by: Mike Tancsa <mike@sentex.net> Reviewed by: ru, bmilekic, jlemon, dillon
2001-03-08 19:03:26 +00:00
* Save the IP header and at most 8 bytes of the payload,
* in case we need to generate an ICMP message to the src.
*
Move some global variables in more appropriate places. Add XXX comments to mark places which need to be taken care of if we want to remove this part of the kernel from Giant. Add a comment on a potential performance problem with ip_forward()
2002-06-23 20:48:26 +00:00
* XXX this can be optimized a lot by saving the data in a local
* buffer on the stack (72 bytes at most), and only allocating the
* mbuf if really necessary. The vast majority of the packets
* are forwarded without having to send an ICMP back (either
* because unnecessary, or because rate limited), so we are
* really we are wasting a lot of work here.
*
Remove the 4.3BSD compatible macro m_copy(), use m_copym() instead. Reviewed by: gnn Differential Revision: https://reviews.freebsd.org/D7878
2016-09-15 07:41:48 +00:00
* We don't use m_copym() because it might return a reference
It was possible for ip_forward() to supply to icmp_error() an IP header with ip_len in network byte order. For certain values of ip_len, this could cause icmp_error() to write beyond the end of an mbuf, causing mbuf free-list corruption. This problem was observed during generation of ICMP redirects. We now make quite sure that the copy of the IP header kept for icmp_error() is stored in a non-shared mbuf header so that it will not be modified by ip_output(). Also: - Calculate the correct number of bytes that need to be retained for icmp_error(), instead of assuming that 64 is enough (it's not). - In icmp_error(), use m_copydata instead of bcopy() to copy from the supplied mbuf chain, in case the first 8 bytes of IP payload are not stored directly after the IP header. - Sanity-check ip_len in icmp_error(), and panic if it is less than sizeof(struct ip). Incoming packets with bad ip_len values are discarded in ip_input(), so this should only be triggered by bugs in the code, not by bad packets. This patch results from code and suggestions from Ruslan, Bosko, Jonathan Lemon and Matt Dillon, with important testing by Mike Tancsa, who could reproduce this problem at will. Reported by: Mike Tancsa <mike@sentex.net> Reviewed by: ru, bmilekic, jlemon, dillon
2001-03-08 19:03:26 +00:00
* to a shared cluster. Both this function and ip_output()
* assume exclusive access to the IP header in `m', so any
* data in a cluster may change before we reach icmp_error().
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
*/
Use m_get/m_gethdr instead of compat macros. Sponsored by: Nginx, Inc.
2013-03-15 12:55:30 +00:00
mcopy = m_gethdr(M_NOWAIT, m->m_type);
Mechanically substitute flags from historic mbuf allocator with malloc(9) flags within sys. Exceptions: - sys/contrib not touched - sys/mbuf.h edited manually
2012-12-05 08:04:20 +00:00
if (mcopy != NULL && !m_dup_pkthdr(mcopy, m, M_NOWAIT)) {
Correct mbuf packet header propagation. Previously, packet headers were sometimes propagated using M_COPY_PKTHDR which actually did something between a "move" and a "copy" operation. This is replaced by M_MOVE_PKTHDR (which copies the pkthdr contents and "removes" it from the source mbuf) and m_dup_pkthdr which copies the packet header contents including any m_tag chain. This corrects numerous problems whereby mbuf tags could be lost during packet manipulations. These changes also introduce arguments to m_tag_copy and m_tag_copy_chain to specify if the tag copy work should potentially block. This introduces an incompatibility with openbsd which we may want to revisit. Note that move/dup of packet headers does not handle target mbufs that have a cluster bound to them. We may want to support this; for now we watch for it with an assert. Finally, M_COPYFLAGS was updated to include M_FIRSTFRAG|M_LASTFRAG. Supported by: Vernier Networks Reviewed by: Robert Watson <rwatson@FreeBSD.org>
2002-12-30 20:22:40 +00:00
/*
* It's probably ok if the pkthdr dup fails (because
* the deep copy of the tag chain failed), but for now
* be conservative and just discard the copy since
* code below may some day want the tags.
*/
m_free(mcopy);
mcopy = NULL;
}
It was possible for ip_forward() to supply to icmp_error() an IP header with ip_len in network byte order. For certain values of ip_len, this could cause icmp_error() to write beyond the end of an mbuf, causing mbuf free-list corruption. This problem was observed during generation of ICMP redirects. We now make quite sure that the copy of the IP header kept for icmp_error() is stored in a non-shared mbuf header so that it will not be modified by ip_output(). Also: - Calculate the correct number of bytes that need to be retained for icmp_error(), instead of assuming that 64 is enough (it's not). - In icmp_error(), use m_copydata instead of bcopy() to copy from the supplied mbuf chain, in case the first 8 bytes of IP payload are not stored directly after the IP header. - Sanity-check ip_len in icmp_error(), and panic if it is less than sizeof(struct ip). Incoming packets with bad ip_len values are discarded in ip_input(), so this should only be triggered by bugs in the code, not by bad packets. This patch results from code and suggestions from Ruslan, Bosko, Jonathan Lemon and Matt Dillon, with important testing by Mike Tancsa, who could reproduce this problem at will. Reported by: Mike Tancsa <mike@sentex.net> Reviewed by: ru, bmilekic, jlemon, dillon
2001-03-08 19:03:26 +00:00
if (mcopy != NULL) {
Switch the entire IPv4 stack to keep the IP packet header in network byte order. Any host byte order processing is done in local variables and host byte order values are never[1] written to a packet. After this change a packet processed by the stack isn't modified at all[2] except for TTL. After this change a network stack hacker doesn't need to scratch his head trying to figure out what is the byte order at the given place in the stack. [1] One exception still remains. The raw sockets convert host byte order before pass a packet to an application. Probably this would remain for ages for compatibility. [2] The ip_input() still subtructs header len from ip->ip_len, but this is planned to be fixed soon. Reviewed by: luigi, Maxim Dounin <mdounin mdounin.ru> Tested by: ray, Olivier Cochard-Labbe <olivier cochard.me>
2012-10-22 21:09:03 +00:00
mcopy->m_len = min(ntohs(ip->ip_len), M_TRAILINGSPACE(mcopy));
In ip_forward(), set m->m_pkthdr.len correctly such that the mbuf chain is sane, and ipsec4_getpolicybyaddr() will therefore complete. PR: kern/42727 Obtained from: KAME (kame/freebsd4/sys/netinet/ip_input.c rev 1.42)
2004-06-16 08:28:54 +00:00
mcopy->m_pkthdr.len = mcopy->m_len;
It was possible for ip_forward() to supply to icmp_error() an IP header with ip_len in network byte order. For certain values of ip_len, this could cause icmp_error() to write beyond the end of an mbuf, causing mbuf free-list corruption. This problem was observed during generation of ICMP redirects. We now make quite sure that the copy of the IP header kept for icmp_error() is stored in a non-shared mbuf header so that it will not be modified by ip_output(). Also: - Calculate the correct number of bytes that need to be retained for icmp_error(), instead of assuming that 64 is enough (it's not). - In icmp_error(), use m_copydata instead of bcopy() to copy from the supplied mbuf chain, in case the first 8 bytes of IP payload are not stored directly after the IP header. - Sanity-check ip_len in icmp_error(), and panic if it is less than sizeof(struct ip). Incoming packets with bad ip_len values are discarded in ip_input(), so this should only be triggered by bugs in the code, not by bad packets. This patch results from code and suggestions from Ruslan, Bosko, Jonathan Lemon and Matt Dillon, with important testing by Mike Tancsa, who could reproduce this problem at will. Reported by: Mike Tancsa <mike@sentex.net> Reviewed by: ru, bmilekic, jlemon, dillon
2001-03-08 19:03:26 +00:00
m_copydata(m, 0, mcopy->m_len, mtod(mcopy, caddr_t));
}
Fixed broken ICMP error generation, unified conversion of IP header fields between host and network byte order. The details: o icmp_error() now does not add IP header length. This fixes the problem when icmp_error() is called from ip_forward(). In this case the ip_len of the original IP datagram returned with ICMP error was wrong. o icmp_error() expects all three fields, ip_len, ip_id and ip_off in host byte order, so DTRT and convert these fields back to network byte order before sending a message. This fixes the problem described in PR 16240 and PR 20877 (ip_id field was returned in host byte order). o ip_ttl decrement operation in ip_forward() was moved down to make sure that it does not corrupt the copy of original IP datagram passed later to icmp_error(). o A copy of original IP datagram in ip_forward() was made a read-write, independent copy. This fixes the problem I first reported to Garrett Wollman and Bill Fenner and later put in audit trail of PR 16240: ip_output() (not always) converts fields of original datagram to network byte order, but because copy (mcopy) and its original (m) most likely share the same mbuf cluster, ip_output()'s manipulations on original also corrupted the copy. o ip_output() now expects all three fields, ip_len, ip_off and (what is significant) ip_id in host byte order. It was a headache for years that ip_id was handled differently. The only compatibility issue here is the raw IP socket interface with IP_HDRINCL socket option set and a non-zero ip_id field, but ip.4 manual page was unclear on whether in this case ip_id field should be in host or network byte order.
2000-09-01 12:33:03 +00:00
#ifdef IPSTEALTH
Merge projects/ipsec into head/. Small summary ------------- o Almost all IPsec releated code was moved into sys/netipsec. o New kernel modules added: ipsec.ko and tcpmd5.ko. New kernel option IPSEC_SUPPORT added. It enables support for loading and unloading of ipsec.ko and tcpmd5.ko kernel modules. o IPSEC_NAT_T option was removed. Now NAT-T support is enabled by default. The UDP_ENCAP_ESPINUDP_NON_IKE encapsulation type support was removed. Added TCP/UDP checksum handling for inbound packets that were decapsulated by transport mode SAs. setkey(8) modified to show run-time NAT-T configuration of SA. o New network pseudo interface if_ipsec(4) added. For now it is build as part of ipsec.ko module (or with IPSEC kernel). It implements IPsec virtual tunnels to create route-based VPNs. o The network stack now invokes IPsec functions using special methods. The only one header file <netipsec/ipsec_support.h> should be included to declare all the needed things to work with IPsec. o All IPsec protocols handlers (ESP/AH/IPCOMP protosw) were removed. Now these protocols are handled directly via IPsec methods. o TCP_SIGNATURE support was reworked to be more close to RFC. o PF_KEY SADB was reworked: - now all security associations stored in the single SPI namespace, and all SAs MUST have unique SPI. - several hash tables added to speed up lookups in SADB. - SADB now uses rmlock to protect access, and concurrent threads can do SA lookups in the same time. - many PF_KEY message handlers were reworked to reflect changes in SADB. - SADB_UPDATE message was extended to support new PF_KEY headers: SADB_X_EXT_NEW_ADDRESS_SRC and SADB_X_EXT_NEW_ADDRESS_DST. They can be used by IKE daemon to change SA addresses. o ipsecrequest and secpolicy structures were cardinally changed to avoid locking protection for ipsecrequest. Now we support only limited number (4) of bundled SAs, but they are supported for both INET and INET6. o INPCB security policy cache was introduced. Each PCB now caches used security policies to avoid SP lookup for each packet. o For inbound security policies added the mode, when the kernel does check for full history of applied IPsec transforms. o References counting rules for security policies and security associations were changed. The proper SA locking added into xform code. o xform code was also changed. Now it is possible to unregister xforms. tdb_xxx structures were changed and renamed to reflect changes in SADB/SPDB, and changed rules for locking and refcounting. Reviewed by: gnn, wblock Obtained from: Yandex LLC Relnotes: yes Sponsored by: Yandex LLC Differential Revision: https://reviews.freebsd.org/D9352
2017-02-06 08:49:57 +00:00
if (V_ipstealth == 0)
Fixed broken ICMP error generation, unified conversion of IP header fields between host and network byte order. The details: o icmp_error() now does not add IP header length. This fixes the problem when icmp_error() is called from ip_forward(). In this case the ip_len of the original IP datagram returned with ICMP error was wrong. o icmp_error() expects all three fields, ip_len, ip_id and ip_off in host byte order, so DTRT and convert these fields back to network byte order before sending a message. This fixes the problem described in PR 16240 and PR 20877 (ip_id field was returned in host byte order). o ip_ttl decrement operation in ip_forward() was moved down to make sure that it does not corrupt the copy of original IP datagram passed later to icmp_error(). o A copy of original IP datagram in ip_forward() was made a read-write, independent copy. This fixes the problem I first reported to Garrett Wollman and Bill Fenner and later put in audit trail of PR 16240: ip_output() (not always) converts fields of original datagram to network byte order, but because copy (mcopy) and its original (m) most likely share the same mbuf cluster, ip_output()'s manipulations on original also corrupted the copy. o ip_output() now expects all three fields, ip_len, ip_off and (what is significant) ip_id in host byte order. It was a headache for years that ip_id was handled differently. The only compatibility issue here is the raw IP socket interface with IP_HDRINCL socket option set and a non-zero ip_id field, but ip.4 manual page was unclear on whether in this case ip_id field should be in host or network byte order.
2000-09-01 12:33:03 +00:00
#endif
ip->ip_ttl -= IPTTLDEC;
Merge projects/ipsec into head/. Small summary ------------- o Almost all IPsec releated code was moved into sys/netipsec. o New kernel modules added: ipsec.ko and tcpmd5.ko. New kernel option IPSEC_SUPPORT added. It enables support for loading and unloading of ipsec.ko and tcpmd5.ko kernel modules. o IPSEC_NAT_T option was removed. Now NAT-T support is enabled by default. The UDP_ENCAP_ESPINUDP_NON_IKE encapsulation type support was removed. Added TCP/UDP checksum handling for inbound packets that were decapsulated by transport mode SAs. setkey(8) modified to show run-time NAT-T configuration of SA. o New network pseudo interface if_ipsec(4) added. For now it is build as part of ipsec.ko module (or with IPSEC kernel). It implements IPsec virtual tunnels to create route-based VPNs. o The network stack now invokes IPsec functions using special methods. The only one header file <netipsec/ipsec_support.h> should be included to declare all the needed things to work with IPsec. o All IPsec protocols handlers (ESP/AH/IPCOMP protosw) were removed. Now these protocols are handled directly via IPsec methods. o TCP_SIGNATURE support was reworked to be more close to RFC. o PF_KEY SADB was reworked: - now all security associations stored in the single SPI namespace, and all SAs MUST have unique SPI. - several hash tables added to speed up lookups in SADB. - SADB now uses rmlock to protect access, and concurrent threads can do SA lookups in the same time. - many PF_KEY message handlers were reworked to reflect changes in SADB. - SADB_UPDATE message was extended to support new PF_KEY headers: SADB_X_EXT_NEW_ADDRESS_SRC and SADB_X_EXT_NEW_ADDRESS_DST. They can be used by IKE daemon to change SA addresses. o ipsecrequest and secpolicy structures were cardinally changed to avoid locking protection for ipsecrequest. Now we support only limited number (4) of bundled SAs, but they are supported for both INET and INET6. o INPCB security policy cache was introduced. Each PCB now caches used security policies to avoid SP lookup for each packet. o For inbound security policies added the mode, when the kernel does check for full history of applied IPsec transforms. o References counting rules for security policies and security associations were changed. The proper SA locking added into xform code. o xform code was also changed. Now it is possible to unregister xforms. tdb_xxx structures were changed and renamed to reflect changes in SADB/SPDB, and changed rules for locking and refcounting. Reviewed by: gnn, wblock Obtained from: Yandex LLC Relnotes: yes Sponsored by: Yandex LLC Differential Revision: https://reviews.freebsd.org/D9352
2017-02-06 08:49:57 +00:00
#if defined(IPSEC) || defined(IPSEC_SUPPORT)
if (IPSEC_ENABLED(ipv4)) {
if ((error = IPSEC_FORWARD(ipv4, m)) != 0) {
/* mbuf consumed by IPsec */
m_freem(mcopy);
if (error != EINPROGRESS)
IPSTAT_INC(ips_cantforward);
return;
}
/* No IPsec processing required */
Fixed broken ICMP error generation, unified conversion of IP header fields between host and network byte order. The details: o icmp_error() now does not add IP header length. This fixes the problem when icmp_error() is called from ip_forward(). In this case the ip_len of the original IP datagram returned with ICMP error was wrong. o icmp_error() expects all three fields, ip_len, ip_id and ip_off in host byte order, so DTRT and convert these fields back to network byte order before sending a message. This fixes the problem described in PR 16240 and PR 20877 (ip_id field was returned in host byte order). o ip_ttl decrement operation in ip_forward() was moved down to make sure that it does not corrupt the copy of original IP datagram passed later to icmp_error(). o A copy of original IP datagram in ip_forward() was made a read-write, independent copy. This fixes the problem I first reported to Garrett Wollman and Bill Fenner and later put in audit trail of PR 16240: ip_output() (not always) converts fields of original datagram to network byte order, but because copy (mcopy) and its original (m) most likely share the same mbuf cluster, ip_output()'s manipulations on original also corrupted the copy. o ip_output() now expects all three fields, ip_len, ip_off and (what is significant) ip_id in host byte order. It was a headache for years that ip_id was handled differently. The only compatibility issue here is the raw IP socket interface with IP_HDRINCL socket option set and a non-zero ip_id field, but ip.4 manual page was unclear on whether in this case ip_id field should be in host or network byte order.
2000-09-01 12:33:03 +00:00
}
Merge projects/ipsec into head/. Small summary ------------- o Almost all IPsec releated code was moved into sys/netipsec. o New kernel modules added: ipsec.ko and tcpmd5.ko. New kernel option IPSEC_SUPPORT added. It enables support for loading and unloading of ipsec.ko and tcpmd5.ko kernel modules. o IPSEC_NAT_T option was removed. Now NAT-T support is enabled by default. The UDP_ENCAP_ESPINUDP_NON_IKE encapsulation type support was removed. Added TCP/UDP checksum handling for inbound packets that were decapsulated by transport mode SAs. setkey(8) modified to show run-time NAT-T configuration of SA. o New network pseudo interface if_ipsec(4) added. For now it is build as part of ipsec.ko module (or with IPSEC kernel). It implements IPsec virtual tunnels to create route-based VPNs. o The network stack now invokes IPsec functions using special methods. The only one header file <netipsec/ipsec_support.h> should be included to declare all the needed things to work with IPsec. o All IPsec protocols handlers (ESP/AH/IPCOMP protosw) were removed. Now these protocols are handled directly via IPsec methods. o TCP_SIGNATURE support was reworked to be more close to RFC. o PF_KEY SADB was reworked: - now all security associations stored in the single SPI namespace, and all SAs MUST have unique SPI. - several hash tables added to speed up lookups in SADB. - SADB now uses rmlock to protect access, and concurrent threads can do SA lookups in the same time. - many PF_KEY message handlers were reworked to reflect changes in SADB. - SADB_UPDATE message was extended to support new PF_KEY headers: SADB_X_EXT_NEW_ADDRESS_SRC and SADB_X_EXT_NEW_ADDRESS_DST. They can be used by IKE daemon to change SA addresses. o ipsecrequest and secpolicy structures were cardinally changed to avoid locking protection for ipsecrequest. Now we support only limited number (4) of bundled SAs, but they are supported for both INET and INET6. o INPCB security policy cache was introduced. Each PCB now caches used security policies to avoid SP lookup for each packet. o For inbound security policies added the mode, when the kernel does check for full history of applied IPsec transforms. o References counting rules for security policies and security associations were changed. The proper SA locking added into xform code. o xform code was also changed. Now it is possible to unregister xforms. tdb_xxx structures were changed and renamed to reflect changes in SADB/SPDB, and changed rules for locking and refcounting. Reviewed by: gnn, wblock Obtained from: Yandex LLC Relnotes: yes Sponsored by: Yandex LLC Differential Revision: https://reviews.freebsd.org/D9352
2017-02-06 08:49:57 +00:00
#endif /* IPSEC */
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
/*
* If forwarding packet using same interface that it came in on,
* perhaps should send a redirect to sender to shortcut a hop.
* Only send redirect if source is sending directly to us,
* and if packet was not source routed (or has any options).
* Also, don't send redirect if forwarding using a default route
* or a route modified by a redirect.
*/
Convert ipfw to use PFIL_HOOKS. This is change is transparent to userland and preserves the ipfw ABI. The ipfw core packet inspection and filtering functions have not been changed, only how ipfw is invoked is different. However there are many changes how ipfw is and its add-on's are handled: In general ipfw is now called through the PFIL_HOOKS and most associated magic, that was in ip_input() or ip_output() previously, is now done in ipfw_check_[in|out]() in the ipfw PFIL handler. IPDIVERT is entirely handled within the ipfw PFIL handlers. A packet to be diverted is checked if it is fragmented, if yes, ip_reass() gets in for reassembly. If not, or all fragments arrived and the packet is complete, divert_packet is called directly. For 'tee' no reassembly attempt is made and a copy of the packet is sent to the divert socket unmodified. The original packet continues its way through ip_input/output(). ipfw 'forward' is done via m_tag's. The ipfw PFIL handlers tag the packet with the new destination sockaddr_in. A check if the new destination is a local IP address is made and the m_flags are set appropriately. ip_input() and ip_output() have some more work to do here. For ip_input() the m_flags are checked and a packet for us is directly sent to the 'ours' section for further processing. Destination changes on the input path are only tagged and the 'srcrt' flag to ip_forward() is set to disable destination checks and ICMP replies at this stage. The tag is going to be handled on output. ip_output() again checks for m_flags and the 'ours' tag. If found, the packet will be dropped back to the IP netisr where it is going to be picked up by ip_input() again and the directly sent to the 'ours' section. When only the destination changes, the route's 'dst' is overwritten with the new destination from the forward m_tag. Then it jumps back at the route lookup again and skips the firewall check because it has been marked with M_SKIP_FIREWALL. ipfw 'forward' has to be compiled into the kernel with 'option IPFIREWALL_FORWARD' to enable it. DUMMYNET is entirely handled within the ipfw PFIL handlers. A packet for a dummynet pipe or queue is directly sent to dummynet_io(). Dummynet will then inject it back into ip_input/ip_output() after it has served its time. Dummynet packets are tagged and will continue from the next rule when they hit the ipfw PFIL handlers again after re-injection. BRIDGING and IPFW_ETHER are not changed yet and use ipfw_chk() directly as they did before. Later this will be changed to dedicated ETHER PFIL_HOOKS. More detailed changes to the code: conf/files Add netinet/ip_fw_pfil.c. conf/options Add IPFIREWALL_FORWARD option. modules/ipfw/Makefile Add ip_fw_pfil.c. net/bridge.c Disable PFIL_HOOKS if ipfw for bridging is active. Bridging ipfw is still directly invoked to handle layer2 headers and packets would get a double ipfw when run through PFIL_HOOKS as well. netinet/ip_divert.c Removed divert_clone() function. It is no longer used. netinet/ip_dummynet.[ch] Neither the route 'ro' nor the destination 'dst' need to be stored while in dummynet transit. Structure members and associated macros are removed. netinet/ip_fastfwd.c Removed all direct ipfw handling code and replace it with the new 'ipfw forward' handling code. netinet/ip_fw.h Removed 'ro' and 'dst' from struct ip_fw_args. netinet/ip_fw2.c (Re)moved some global variables and the module handling. netinet/ip_fw_pfil.c New file containing the ipfw PFIL handlers and module initialization. netinet/ip_input.c Removed all direct ipfw handling code and replace it with the new 'ipfw forward' handling code. ip_forward() does not longer require the 'next_hop' struct sockaddr_in argument. Disable early checks if 'srcrt' is set. netinet/ip_output.c Removed all direct ipfw handling code and replace it with the new 'ipfw forward' handling code. netinet/ip_var.h Add ip_reass() as general function. (Used from ipfw PFIL handlers for IPDIVERT.) netinet/raw_ip.c Directly check if ipfw and dummynet control pointers are active. netinet/tcp_input.c Rework the 'ipfw forward' to local code to work with the new way of forward tags. netinet/tcp_sack.c Remove include 'opt_ipfw.h' which is not needed here. sys/mbuf.h Remove m_claim_next() macro which was exclusively for ipfw 'forward' and is no longer needed. Approved by: re (scottl)
2004-08-17 22:05:54 +00:00
dest.s_addr = 0;
Don't discard packets with 'Destination Unreachable' at the beginning of ip_forward(), if the IPSEC is compiled in. It is possible that there is an SPD that this packets will go through, even if there is no matching route. If not, ICMP will be sent anyway, after ip_output(). This is somewhat similar in purpose to r191621, except that one was for the packets sent from the host, while this one is for packets being forwarded by the host. Reviewed by: bz@ Sponsored by: Wheel Sp. z o.o. (http://www.wheel.pl)
2009-05-27 12:44:36 +00:00
if (!srcrt && V_ipsendredirects &&
ia != NULL && ia->ia_ifp == m->m_pkthdr.rcvif) {
Remove the global one-level rtcache variable and associated complex locking and rework ip_rtaddr() to do its own rtlookup. Adopt all its callers to this and make ip_output() callable with NULL rt pointer. Reviewed by: sam (mentor)
2003-11-14 21:48:57 +00:00
struct rtentry *rt;
rt = ro.ro_rt;
if (rt && (rt->rt_flags & (RTF_DYNAMIC|RTF_MODIFIED)) == 0 &&
Convert ipfw to use PFIL_HOOKS. This is change is transparent to userland and preserves the ipfw ABI. The ipfw core packet inspection and filtering functions have not been changed, only how ipfw is invoked is different. However there are many changes how ipfw is and its add-on's are handled: In general ipfw is now called through the PFIL_HOOKS and most associated magic, that was in ip_input() or ip_output() previously, is now done in ipfw_check_[in|out]() in the ipfw PFIL handler. IPDIVERT is entirely handled within the ipfw PFIL handlers. A packet to be diverted is checked if it is fragmented, if yes, ip_reass() gets in for reassembly. If not, or all fragments arrived and the packet is complete, divert_packet is called directly. For 'tee' no reassembly attempt is made and a copy of the packet is sent to the divert socket unmodified. The original packet continues its way through ip_input/output(). ipfw 'forward' is done via m_tag's. The ipfw PFIL handlers tag the packet with the new destination sockaddr_in. A check if the new destination is a local IP address is made and the m_flags are set appropriately. ip_input() and ip_output() have some more work to do here. For ip_input() the m_flags are checked and a packet for us is directly sent to the 'ours' section for further processing. Destination changes on the input path are only tagged and the 'srcrt' flag to ip_forward() is set to disable destination checks and ICMP replies at this stage. The tag is going to be handled on output. ip_output() again checks for m_flags and the 'ours' tag. If found, the packet will be dropped back to the IP netisr where it is going to be picked up by ip_input() again and the directly sent to the 'ours' section. When only the destination changes, the route's 'dst' is overwritten with the new destination from the forward m_tag. Then it jumps back at the route lookup again and skips the firewall check because it has been marked with M_SKIP_FIREWALL. ipfw 'forward' has to be compiled into the kernel with 'option IPFIREWALL_FORWARD' to enable it. DUMMYNET is entirely handled within the ipfw PFIL handlers. A packet for a dummynet pipe or queue is directly sent to dummynet_io(). Dummynet will then inject it back into ip_input/ip_output() after it has served its time. Dummynet packets are tagged and will continue from the next rule when they hit the ipfw PFIL handlers again after re-injection. BRIDGING and IPFW_ETHER are not changed yet and use ipfw_chk() directly as they did before. Later this will be changed to dedicated ETHER PFIL_HOOKS. More detailed changes to the code: conf/files Add netinet/ip_fw_pfil.c. conf/options Add IPFIREWALL_FORWARD option. modules/ipfw/Makefile Add ip_fw_pfil.c. net/bridge.c Disable PFIL_HOOKS if ipfw for bridging is active. Bridging ipfw is still directly invoked to handle layer2 headers and packets would get a double ipfw when run through PFIL_HOOKS as well. netinet/ip_divert.c Removed divert_clone() function. It is no longer used. netinet/ip_dummynet.[ch] Neither the route 'ro' nor the destination 'dst' need to be stored while in dummynet transit. Structure members and associated macros are removed. netinet/ip_fastfwd.c Removed all direct ipfw handling code and replace it with the new 'ipfw forward' handling code. netinet/ip_fw.h Removed 'ro' and 'dst' from struct ip_fw_args. netinet/ip_fw2.c (Re)moved some global variables and the module handling. netinet/ip_fw_pfil.c New file containing the ipfw PFIL handlers and module initialization. netinet/ip_input.c Removed all direct ipfw handling code and replace it with the new 'ipfw forward' handling code. ip_forward() does not longer require the 'next_hop' struct sockaddr_in argument. Disable early checks if 'srcrt' is set. netinet/ip_output.c Removed all direct ipfw handling code and replace it with the new 'ipfw forward' handling code. netinet/ip_var.h Add ip_reass() as general function. (Used from ipfw PFIL handlers for IPDIVERT.) netinet/raw_ip.c Directly check if ipfw and dummynet control pointers are active. netinet/tcp_input.c Rework the 'ipfw forward' to local code to work with the new way of forward tags. netinet/tcp_sack.c Remove include 'opt_ipfw.h' which is not needed here. sys/mbuf.h Remove m_claim_next() macro which was exclusively for ipfw 'forward' and is no longer needed. Approved by: re (scottl)
2004-08-17 22:05:54 +00:00
satosin(rt_key(rt))->sin_addr.s_addr != 0) {
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
#define RTA(rt) ((struct in_ifaddr *)(rt->rt_ifa))
Remove the global one-level rtcache variable and associated complex locking and rework ip_rtaddr() to do its own rtlookup. Adopt all its callers to this and make ip_output() callable with NULL rt pointer. Reviewed by: sam (mentor)
2003-11-14 21:48:57 +00:00
u_long src = ntohl(ip->ip_src.s_addr);
if (RTA(rt) &&
(src & RTA(rt)->ia_subnetmask) == RTA(rt)->ia_subnet) {
if (rt->rt_flags & RTF_GATEWAY)
Convert ipfw to use PFIL_HOOKS. This is change is transparent to userland and preserves the ipfw ABI. The ipfw core packet inspection and filtering functions have not been changed, only how ipfw is invoked is different. However there are many changes how ipfw is and its add-on's are handled: In general ipfw is now called through the PFIL_HOOKS and most associated magic, that was in ip_input() or ip_output() previously, is now done in ipfw_check_[in|out]() in the ipfw PFIL handler. IPDIVERT is entirely handled within the ipfw PFIL handlers. A packet to be diverted is checked if it is fragmented, if yes, ip_reass() gets in for reassembly. If not, or all fragments arrived and the packet is complete, divert_packet is called directly. For 'tee' no reassembly attempt is made and a copy of the packet is sent to the divert socket unmodified. The original packet continues its way through ip_input/output(). ipfw 'forward' is done via m_tag's. The ipfw PFIL handlers tag the packet with the new destination sockaddr_in. A check if the new destination is a local IP address is made and the m_flags are set appropriately. ip_input() and ip_output() have some more work to do here. For ip_input() the m_flags are checked and a packet for us is directly sent to the 'ours' section for further processing. Destination changes on the input path are only tagged and the 'srcrt' flag to ip_forward() is set to disable destination checks and ICMP replies at this stage. The tag is going to be handled on output. ip_output() again checks for m_flags and the 'ours' tag. If found, the packet will be dropped back to the IP netisr where it is going to be picked up by ip_input() again and the directly sent to the 'ours' section. When only the destination changes, the route's 'dst' is overwritten with the new destination from the forward m_tag. Then it jumps back at the route lookup again and skips the firewall check because it has been marked with M_SKIP_FIREWALL. ipfw 'forward' has to be compiled into the kernel with 'option IPFIREWALL_FORWARD' to enable it. DUMMYNET is entirely handled within the ipfw PFIL handlers. A packet for a dummynet pipe or queue is directly sent to dummynet_io(). Dummynet will then inject it back into ip_input/ip_output() after it has served its time. Dummynet packets are tagged and will continue from the next rule when they hit the ipfw PFIL handlers again after re-injection. BRIDGING and IPFW_ETHER are not changed yet and use ipfw_chk() directly as they did before. Later this will be changed to dedicated ETHER PFIL_HOOKS. More detailed changes to the code: conf/files Add netinet/ip_fw_pfil.c. conf/options Add IPFIREWALL_FORWARD option. modules/ipfw/Makefile Add ip_fw_pfil.c. net/bridge.c Disable PFIL_HOOKS if ipfw for bridging is active. Bridging ipfw is still directly invoked to handle layer2 headers and packets would get a double ipfw when run through PFIL_HOOKS as well. netinet/ip_divert.c Removed divert_clone() function. It is no longer used. netinet/ip_dummynet.[ch] Neither the route 'ro' nor the destination 'dst' need to be stored while in dummynet transit. Structure members and associated macros are removed. netinet/ip_fastfwd.c Removed all direct ipfw handling code and replace it with the new 'ipfw forward' handling code. netinet/ip_fw.h Removed 'ro' and 'dst' from struct ip_fw_args. netinet/ip_fw2.c (Re)moved some global variables and the module handling. netinet/ip_fw_pfil.c New file containing the ipfw PFIL handlers and module initialization. netinet/ip_input.c Removed all direct ipfw handling code and replace it with the new 'ipfw forward' handling code. ip_forward() does not longer require the 'next_hop' struct sockaddr_in argument. Disable early checks if 'srcrt' is set. netinet/ip_output.c Removed all direct ipfw handling code and replace it with the new 'ipfw forward' handling code. netinet/ip_var.h Add ip_reass() as general function. (Used from ipfw PFIL handlers for IPDIVERT.) netinet/raw_ip.c Directly check if ipfw and dummynet control pointers are active. netinet/tcp_input.c Rework the 'ipfw forward' to local code to work with the new way of forward tags. netinet/tcp_sack.c Remove include 'opt_ipfw.h' which is not needed here. sys/mbuf.h Remove m_claim_next() macro which was exclusively for ipfw 'forward' and is no longer needed. Approved by: re (scottl)
2004-08-17 22:05:54 +00:00
dest.s_addr = satosin(rt->rt_gateway)->sin_addr.s_addr;
Remove the global one-level rtcache variable and associated complex locking and rework ip_rtaddr() to do its own rtlookup. Adopt all its callers to this and make ip_output() callable with NULL rt pointer. Reviewed by: sam (mentor)
2003-11-14 21:48:57 +00:00
else
Convert ipfw to use PFIL_HOOKS. This is change is transparent to userland and preserves the ipfw ABI. The ipfw core packet inspection and filtering functions have not been changed, only how ipfw is invoked is different. However there are many changes how ipfw is and its add-on's are handled: In general ipfw is now called through the PFIL_HOOKS and most associated magic, that was in ip_input() or ip_output() previously, is now done in ipfw_check_[in|out]() in the ipfw PFIL handler. IPDIVERT is entirely handled within the ipfw PFIL handlers. A packet to be diverted is checked if it is fragmented, if yes, ip_reass() gets in for reassembly. If not, or all fragments arrived and the packet is complete, divert_packet is called directly. For 'tee' no reassembly attempt is made and a copy of the packet is sent to the divert socket unmodified. The original packet continues its way through ip_input/output(). ipfw 'forward' is done via m_tag's. The ipfw PFIL handlers tag the packet with the new destination sockaddr_in. A check if the new destination is a local IP address is made and the m_flags are set appropriately. ip_input() and ip_output() have some more work to do here. For ip_input() the m_flags are checked and a packet for us is directly sent to the 'ours' section for further processing. Destination changes on the input path are only tagged and the 'srcrt' flag to ip_forward() is set to disable destination checks and ICMP replies at this stage. The tag is going to be handled on output. ip_output() again checks for m_flags and the 'ours' tag. If found, the packet will be dropped back to the IP netisr where it is going to be picked up by ip_input() again and the directly sent to the 'ours' section. When only the destination changes, the route's 'dst' is overwritten with the new destination from the forward m_tag. Then it jumps back at the route lookup again and skips the firewall check because it has been marked with M_SKIP_FIREWALL. ipfw 'forward' has to be compiled into the kernel with 'option IPFIREWALL_FORWARD' to enable it. DUMMYNET is entirely handled within the ipfw PFIL handlers. A packet for a dummynet pipe or queue is directly sent to dummynet_io(). Dummynet will then inject it back into ip_input/ip_output() after it has served its time. Dummynet packets are tagged and will continue from the next rule when they hit the ipfw PFIL handlers again after re-injection. BRIDGING and IPFW_ETHER are not changed yet and use ipfw_chk() directly as they did before. Later this will be changed to dedicated ETHER PFIL_HOOKS. More detailed changes to the code: conf/files Add netinet/ip_fw_pfil.c. conf/options Add IPFIREWALL_FORWARD option. modules/ipfw/Makefile Add ip_fw_pfil.c. net/bridge.c Disable PFIL_HOOKS if ipfw for bridging is active. Bridging ipfw is still directly invoked to handle layer2 headers and packets would get a double ipfw when run through PFIL_HOOKS as well. netinet/ip_divert.c Removed divert_clone() function. It is no longer used. netinet/ip_dummynet.[ch] Neither the route 'ro' nor the destination 'dst' need to be stored while in dummynet transit. Structure members and associated macros are removed. netinet/ip_fastfwd.c Removed all direct ipfw handling code and replace it with the new 'ipfw forward' handling code. netinet/ip_fw.h Removed 'ro' and 'dst' from struct ip_fw_args. netinet/ip_fw2.c (Re)moved some global variables and the module handling. netinet/ip_fw_pfil.c New file containing the ipfw PFIL handlers and module initialization. netinet/ip_input.c Removed all direct ipfw handling code and replace it with the new 'ipfw forward' handling code. ip_forward() does not longer require the 'next_hop' struct sockaddr_in argument. Disable early checks if 'srcrt' is set. netinet/ip_output.c Removed all direct ipfw handling code and replace it with the new 'ipfw forward' handling code. netinet/ip_var.h Add ip_reass() as general function. (Used from ipfw PFIL handlers for IPDIVERT.) netinet/raw_ip.c Directly check if ipfw and dummynet control pointers are active. netinet/tcp_input.c Rework the 'ipfw forward' to local code to work with the new way of forward tags. netinet/tcp_sack.c Remove include 'opt_ipfw.h' which is not needed here. sys/mbuf.h Remove m_claim_next() macro which was exclusively for ipfw 'forward' and is no longer needed. Approved by: re (scottl)
2004-08-17 22:05:54 +00:00
dest.s_addr = ip->ip_dst.s_addr;
Remove the global one-level rtcache variable and associated complex locking and rework ip_rtaddr() to do its own rtlookup. Adopt all its callers to this and make ip_output() callable with NULL rt pointer. Reviewed by: sam (mentor)
2003-11-14 21:48:57 +00:00
/* Router requirements says to only send host redirects */
type = ICMP_REDIRECT;
code = ICMP_REDIRECT_HOST;
}
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
}
}
Take the route mtu into account, if available, when sending an ICMP unreach, frag needed. Up to now we only looked at the interface MTU. Make sure to only use the minimum of the two. In case IPSEC is compiled in, loop the mtu through ip_ipsec_mtu() to avoid any further conditional maths. Without this, PMTU was broken in those cases when there was a route with a lower MTU than the MTU of the outgoing interface. PR: kern/122338 Tested by: Mark Cammidge mark peralex.com Reviewed by: silence on net@ MFC after: 2 weeks
2008-04-09 05:17:18 +00:00
error = ip_output(m, NULL, &ro, IP_FORWARDING, NULL, NULL);
if (error == EMSGSIZE && ro.ro_rt)
- Remove rt_metrics_lite and simply put its members into rtentry. - Use counter(9) for rt_pksent (former rt_rmx.rmx_pksent). This removes another cache trashing ++ from packet forwarding path. - Create zini/fini methods for the rtentry UMA zone. Via initialize mutex and counter in them. - Fix reporting of rmx_pksent to routing socket. - Fix netstat(1) to report "Use" both in kvm(3) and sysctl(3) mode. The change is mostly targeted for stable/10 merge. For head, rt_pksent is expected to just disappear. Discussed with: melifaro Sponsored by: Netflix Sponsored by: Nginx, Inc.
2014-03-05 01:17:47 +00:00
mtu = ro.ro_rt->rt_mtu;
When ip_output()/ip6_output() is supplied a struct route *ro argument, it skips FLOWTABLE lookup. However, the non-NULL ro has dual meaning here: it may be supplied to provide route, and it may be supplied to store and return to caller the route that ip_output()/ip6_output() finds. In the latter case skipping FLOWTABLE lookup is pessimisation. The difference between struct route filled by FLOWTABLE and filled by rtalloc() family is that the former doesn't hold a reference on its rtentry. Reference is hold by flow entry, and it is about to be released in future. Thus, route filled by FLOWTABLE shouldn't be passed to RTFREE() macro. - Introduce new flag for struct route/route_in6, that marks route not holding a reference on rtentry. - Introduce new macro RO_RTFREE() that cleans up a struct route depending on its kind. - All callers to ip_output()/ip6_output() that do supply non-NULL but empty route should use RO_RTFREE() to free results of lookup. - ip_output()/ip6_output() now do FLOWTABLE lookup always when ro->ro_rt == NULL. Tested by: tuexen (SCTP part)
2012-07-04 07:37:53 +00:00
RO_RTFREE(&ro);
Take the route mtu into account, if available, when sending an ICMP unreach, frag needed. Up to now we only looked at the interface MTU. Make sure to only use the minimum of the two. In case IPSEC is compiled in, loop the mtu through ip_ipsec_mtu() to avoid any further conditional maths. Without this, PMTU was broken in those cases when there was a route with a lower MTU than the MTU of the outgoing interface. PR: kern/122338 Tested by: Mark Cammidge mark peralex.com Reviewed by: silence on net@ MFC after: 2 weeks
2008-04-09 05:17:18 +00:00
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
if (error)
Update stats in struct ipstat using four new macros, IPSTAT_ADD(), IPSTAT_INC(), IPSTAT_SUB(), and IPSTAT_DEC(), rather than directly manipulating the fields across the kernel. This will make it easier to change the implementation of these statistics, such as using per-CPU versions of the data structures. MFC after: 3 days
2009-04-11 23:35:20 +00:00
IPSTAT_INC(ips_cantforward);
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
else {
Update stats in struct ipstat using four new macros, IPSTAT_ADD(), IPSTAT_INC(), IPSTAT_SUB(), and IPSTAT_DEC(), rather than directly manipulating the fields across the kernel. This will make it easier to change the implementation of these statistics, such as using per-CPU versions of the data structures. MFC after: 3 days
2009-04-11 23:35:20 +00:00
IPSTAT_INC(ips_forward);
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
if (type)
Update stats in struct ipstat using four new macros, IPSTAT_ADD(), IPSTAT_INC(), IPSTAT_SUB(), and IPSTAT_DEC(), rather than directly manipulating the fields across the kernel. This will make it easier to change the implementation of these statistics, such as using per-CPU versions of the data structures. MFC after: 3 days
2009-04-11 23:35:20 +00:00
IPSTAT_INC(ips_redirectsent);
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
else {
Introduce ip_fastforward and remove ip_flow. Short description of ip_fastforward: o adds full direct process-to-completion IPv4 forwarding code o handles ip fragmentation incl. hw support (ip_flow did not) o sends icmp needfrag to source if DF is set (ip_flow did not) o supports ipfw and ipfilter (ip_flow did not) o supports divert, ipfw fwd and ipfilter nat (ip_flow did not) o returns anything it can't handle back to normal ip_input Enable with sysctl -w net.inet.ip.fastforwarding=1 Reviewed by: sam (mentor)
2003-11-14 21:02:22 +00:00
if (mcopy)
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
m_freem(mcopy);
Modify most routines returning 'struct ifaddr *' to return references rather than pointers, requiring callers to properly dispose of those references. The following routines now return references: ifaddr_byindex ifa_ifwithaddr ifa_ifwithbroadaddr ifa_ifwithdstaddr ifa_ifwithnet ifaof_ifpforaddr ifa_ifwithroute ifa_ifwithroute_fib rt_getifa rt_getifa_fib IFP_TO_IA ip_rtaddr in6_ifawithifp in6ifa_ifpforlinklocal in6ifa_ifpwithaddr in6_ifadd carp_iamatch6 ip6_getdstifaddr Remove unused macro which didn't have required referencing: IFP_TO_IA6 This closes many small races in which changes to interface or address lists while an ifaddr was in use could lead to use of freed memory (etc). In a few cases, add missing if_addr_list locking required to safely acquire references. Because of a lack of deep copying support, we accept a race in which an in6_ifaddr pointed to by mbuf tags and extracted with ip6_getdstifaddr() doesn't hold a reference while in transmit. Once we have mbuf tag deep copy support, this can be fixed. Reviewed by: bz Obtained from: Apple, Inc. (portions) MFC after: 6 weeks (portions)
2009-06-23 20:19:09 +00:00
if (ia != NULL)
ifa_free(&ia->ia_ifa);
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
return;
}
}
Modify most routines returning 'struct ifaddr *' to return references rather than pointers, requiring callers to properly dispose of those references. The following routines now return references: ifaddr_byindex ifa_ifwithaddr ifa_ifwithbroadaddr ifa_ifwithdstaddr ifa_ifwithnet ifaof_ifpforaddr ifa_ifwithroute ifa_ifwithroute_fib rt_getifa rt_getifa_fib IFP_TO_IA ip_rtaddr in6_ifawithifp in6ifa_ifpforlinklocal in6ifa_ifpwithaddr in6_ifadd carp_iamatch6 ip6_getdstifaddr Remove unused macro which didn't have required referencing: IFP_TO_IA6 This closes many small races in which changes to interface or address lists while an ifaddr was in use could lead to use of freed memory (etc). In a few cases, add missing if_addr_list locking required to safely acquire references. Because of a lack of deep copying support, we accept a race in which an in6_ifaddr pointed to by mbuf tags and extracted with ip6_getdstifaddr() doesn't hold a reference while in transmit. Once we have mbuf tag deep copy support, this can be fixed. Reviewed by: bz Obtained from: Apple, Inc. (portions) MFC after: 6 weeks (portions)
2009-06-23 20:19:09 +00:00
if (mcopy == NULL) {
if (ia != NULL)
ifa_free(&ia->ia_ifa);
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
return;
Modify most routines returning 'struct ifaddr *' to return references rather than pointers, requiring callers to properly dispose of those references. The following routines now return references: ifaddr_byindex ifa_ifwithaddr ifa_ifwithbroadaddr ifa_ifwithdstaddr ifa_ifwithnet ifaof_ifpforaddr ifa_ifwithroute ifa_ifwithroute_fib rt_getifa rt_getifa_fib IFP_TO_IA ip_rtaddr in6_ifawithifp in6ifa_ifpforlinklocal in6ifa_ifpwithaddr in6_ifadd carp_iamatch6 ip6_getdstifaddr Remove unused macro which didn't have required referencing: IFP_TO_IA6 This closes many small races in which changes to interface or address lists while an ifaddr was in use could lead to use of freed memory (etc). In a few cases, add missing if_addr_list locking required to safely acquire references. Because of a lack of deep copying support, we accept a race in which an in6_ifaddr pointed to by mbuf tags and extracted with ip6_getdstifaddr() doesn't hold a reference while in transmit. Once we have mbuf tag deep copy support, this can be fixed. Reviewed by: bz Obtained from: Apple, Inc. (portions) MFC after: 6 weeks (portions)
2009-06-23 20:19:09 +00:00
}
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
switch (error) {
case 0: /* forwarded, but need redirect */
/* type, code set above */
break;
Don't discard packets with 'Destination Unreachable' at the beginning of ip_forward(), if the IPSEC is compiled in. It is possible that there is an SPD that this packets will go through, even if there is no matching route. If not, ICMP will be sent anyway, after ip_output(). This is somewhat similar in purpose to r191621, except that one was for the packets sent from the host, while this one is for packets being forwarded by the host. Reviewed by: bz@ Sponsored by: Wheel Sp. z o.o. (http://www.wheel.pl)
2009-05-27 12:44:36 +00:00
case ENETUNREACH:
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
case EHOSTUNREACH:
case ENETDOWN:
case EHOSTDOWN:
default:
type = ICMP_UNREACH;
code = ICMP_UNREACH_HOST;
break;
case EMSGSIZE:
type = ICMP_UNREACH;
code = ICMP_UNREACH_NEEDFRAG;
Convert ipfw to use PFIL_HOOKS. This is change is transparent to userland and preserves the ipfw ABI. The ipfw core packet inspection and filtering functions have not been changed, only how ipfw is invoked is different. However there are many changes how ipfw is and its add-on's are handled: In general ipfw is now called through the PFIL_HOOKS and most associated magic, that was in ip_input() or ip_output() previously, is now done in ipfw_check_[in|out]() in the ipfw PFIL handler. IPDIVERT is entirely handled within the ipfw PFIL handlers. A packet to be diverted is checked if it is fragmented, if yes, ip_reass() gets in for reassembly. If not, or all fragments arrived and the packet is complete, divert_packet is called directly. For 'tee' no reassembly attempt is made and a copy of the packet is sent to the divert socket unmodified. The original packet continues its way through ip_input/output(). ipfw 'forward' is done via m_tag's. The ipfw PFIL handlers tag the packet with the new destination sockaddr_in. A check if the new destination is a local IP address is made and the m_flags are set appropriately. ip_input() and ip_output() have some more work to do here. For ip_input() the m_flags are checked and a packet for us is directly sent to the 'ours' section for further processing. Destination changes on the input path are only tagged and the 'srcrt' flag to ip_forward() is set to disable destination checks and ICMP replies at this stage. The tag is going to be handled on output. ip_output() again checks for m_flags and the 'ours' tag. If found, the packet will be dropped back to the IP netisr where it is going to be picked up by ip_input() again and the directly sent to the 'ours' section. When only the destination changes, the route's 'dst' is overwritten with the new destination from the forward m_tag. Then it jumps back at the route lookup again and skips the firewall check because it has been marked with M_SKIP_FIREWALL. ipfw 'forward' has to be compiled into the kernel with 'option IPFIREWALL_FORWARD' to enable it. DUMMYNET is entirely handled within the ipfw PFIL handlers. A packet for a dummynet pipe or queue is directly sent to dummynet_io(). Dummynet will then inject it back into ip_input/ip_output() after it has served its time. Dummynet packets are tagged and will continue from the next rule when they hit the ipfw PFIL handlers again after re-injection. BRIDGING and IPFW_ETHER are not changed yet and use ipfw_chk() directly as they did before. Later this will be changed to dedicated ETHER PFIL_HOOKS. More detailed changes to the code: conf/files Add netinet/ip_fw_pfil.c. conf/options Add IPFIREWALL_FORWARD option. modules/ipfw/Makefile Add ip_fw_pfil.c. net/bridge.c Disable PFIL_HOOKS if ipfw for bridging is active. Bridging ipfw is still directly invoked to handle layer2 headers and packets would get a double ipfw when run through PFIL_HOOKS as well. netinet/ip_divert.c Removed divert_clone() function. It is no longer used. netinet/ip_dummynet.[ch] Neither the route 'ro' nor the destination 'dst' need to be stored while in dummynet transit. Structure members and associated macros are removed. netinet/ip_fastfwd.c Removed all direct ipfw handling code and replace it with the new 'ipfw forward' handling code. netinet/ip_fw.h Removed 'ro' and 'dst' from struct ip_fw_args. netinet/ip_fw2.c (Re)moved some global variables and the module handling. netinet/ip_fw_pfil.c New file containing the ipfw PFIL handlers and module initialization. netinet/ip_input.c Removed all direct ipfw handling code and replace it with the new 'ipfw forward' handling code. ip_forward() does not longer require the 'next_hop' struct sockaddr_in argument. Disable early checks if 'srcrt' is set. netinet/ip_output.c Removed all direct ipfw handling code and replace it with the new 'ipfw forward' handling code. netinet/ip_var.h Add ip_reass() as general function. (Used from ipfw PFIL handlers for IPDIVERT.) netinet/raw_ip.c Directly check if ipfw and dummynet control pointers are active. netinet/tcp_input.c Rework the 'ipfw forward' to local code to work with the new way of forward tags. netinet/tcp_sack.c Remove include 'opt_ipfw.h' which is not needed here. sys/mbuf.h Remove m_claim_next() macro which was exclusively for ipfw 'forward' and is no longer needed. Approved by: re (scottl)
2004-08-17 22:05:54 +00:00
/*
Take the route mtu into account, if available, when sending an ICMP unreach, frag needed. Up to now we only looked at the interface MTU. Make sure to only use the minimum of the two. In case IPSEC is compiled in, loop the mtu through ip_ipsec_mtu() to avoid any further conditional maths. Without this, PMTU was broken in those cases when there was a route with a lower MTU than the MTU of the outgoing interface. PR: kern/122338 Tested by: Mark Cammidge mark peralex.com Reviewed by: silence on net@ MFC after: 2 weeks
2008-04-09 05:17:18 +00:00
* If the MTU was set before make sure we are below the
* interface MTU.
When doing IP forwarding with [FAST_]IPSEC compiled into the kernel ip_forward() would report back a zero MTU in ICMP needfrag messages because on a IPSEC SP lookup failure no MTU got computed. Fix this by changing the logic to compute a new MTU in any case if IPSEC didn't do it. Change MTU computation logic to use egress interface MTU if available or the next smaller MTU compared to the current packet size instead of falling back to a very small fixed MTU. Fix associated comment. PR: kern/91412 MFC after: 3 days
2006-01-24 17:57:19 +00:00
* If the MTU wasn't set before use the interface mtu or
* fall back to the next smaller mtu step compared to the
* current packet size.
Convert ipfw to use PFIL_HOOKS. This is change is transparent to userland and preserves the ipfw ABI. The ipfw core packet inspection and filtering functions have not been changed, only how ipfw is invoked is different. However there are many changes how ipfw is and its add-on's are handled: In general ipfw is now called through the PFIL_HOOKS and most associated magic, that was in ip_input() or ip_output() previously, is now done in ipfw_check_[in|out]() in the ipfw PFIL handler. IPDIVERT is entirely handled within the ipfw PFIL handlers. A packet to be diverted is checked if it is fragmented, if yes, ip_reass() gets in for reassembly. If not, or all fragments arrived and the packet is complete, divert_packet is called directly. For 'tee' no reassembly attempt is made and a copy of the packet is sent to the divert socket unmodified. The original packet continues its way through ip_input/output(). ipfw 'forward' is done via m_tag's. The ipfw PFIL handlers tag the packet with the new destination sockaddr_in. A check if the new destination is a local IP address is made and the m_flags are set appropriately. ip_input() and ip_output() have some more work to do here. For ip_input() the m_flags are checked and a packet for us is directly sent to the 'ours' section for further processing. Destination changes on the input path are only tagged and the 'srcrt' flag to ip_forward() is set to disable destination checks and ICMP replies at this stage. The tag is going to be handled on output. ip_output() again checks for m_flags and the 'ours' tag. If found, the packet will be dropped back to the IP netisr where it is going to be picked up by ip_input() again and the directly sent to the 'ours' section. When only the destination changes, the route's 'dst' is overwritten with the new destination from the forward m_tag. Then it jumps back at the route lookup again and skips the firewall check because it has been marked with M_SKIP_FIREWALL. ipfw 'forward' has to be compiled into the kernel with 'option IPFIREWALL_FORWARD' to enable it. DUMMYNET is entirely handled within the ipfw PFIL handlers. A packet for a dummynet pipe or queue is directly sent to dummynet_io(). Dummynet will then inject it back into ip_input/ip_output() after it has served its time. Dummynet packets are tagged and will continue from the next rule when they hit the ipfw PFIL handlers again after re-injection. BRIDGING and IPFW_ETHER are not changed yet and use ipfw_chk() directly as they did before. Later this will be changed to dedicated ETHER PFIL_HOOKS. More detailed changes to the code: conf/files Add netinet/ip_fw_pfil.c. conf/options Add IPFIREWALL_FORWARD option. modules/ipfw/Makefile Add ip_fw_pfil.c. net/bridge.c Disable PFIL_HOOKS if ipfw for bridging is active. Bridging ipfw is still directly invoked to handle layer2 headers and packets would get a double ipfw when run through PFIL_HOOKS as well. netinet/ip_divert.c Removed divert_clone() function. It is no longer used. netinet/ip_dummynet.[ch] Neither the route 'ro' nor the destination 'dst' need to be stored while in dummynet transit. Structure members and associated macros are removed. netinet/ip_fastfwd.c Removed all direct ipfw handling code and replace it with the new 'ipfw forward' handling code. netinet/ip_fw.h Removed 'ro' and 'dst' from struct ip_fw_args. netinet/ip_fw2.c (Re)moved some global variables and the module handling. netinet/ip_fw_pfil.c New file containing the ipfw PFIL handlers and module initialization. netinet/ip_input.c Removed all direct ipfw handling code and replace it with the new 'ipfw forward' handling code. ip_forward() does not longer require the 'next_hop' struct sockaddr_in argument. Disable early checks if 'srcrt' is set. netinet/ip_output.c Removed all direct ipfw handling code and replace it with the new 'ipfw forward' handling code. netinet/ip_var.h Add ip_reass() as general function. (Used from ipfw PFIL handlers for IPDIVERT.) netinet/raw_ip.c Directly check if ipfw and dummynet control pointers are active. netinet/tcp_input.c Rework the 'ipfw forward' to local code to work with the new way of forward tags. netinet/tcp_sack.c Remove include 'opt_ipfw.h' which is not needed here. sys/mbuf.h Remove m_claim_next() macro which was exclusively for ipfw 'forward' and is no longer needed. Approved by: re (scottl)
2004-08-17 22:05:54 +00:00
*/
Take the route mtu into account, if available, when sending an ICMP unreach, frag needed. Up to now we only looked at the interface MTU. Make sure to only use the minimum of the two. In case IPSEC is compiled in, loop the mtu through ip_ipsec_mtu() to avoid any further conditional maths. Without this, PMTU was broken in those cases when there was a route with a lower MTU than the MTU of the outgoing interface. PR: kern/122338 Tested by: Mark Cammidge mark peralex.com Reviewed by: silence on net@ MFC after: 2 weeks
2008-04-09 05:17:18 +00:00
if (mtu != 0) {
if (ia != NULL)
mtu = min(mtu, ia->ia_ifp->if_mtu);
} else {
When doing IP forwarding with [FAST_]IPSEC compiled into the kernel ip_forward() would report back a zero MTU in ICMP needfrag messages because on a IPSEC SP lookup failure no MTU got computed. Fix this by changing the logic to compute a new MTU in any case if IPSEC didn't do it. Change MTU computation logic to use egress interface MTU if available or the next smaller MTU compared to the current packet size instead of falling back to a very small fixed MTU. Fix associated comment. PR: kern/91412 MFC after: 3 days
2006-01-24 17:57:19 +00:00
if (ia != NULL)
mtu = ia->ia_ifp->if_mtu;
else
Switch the entire IPv4 stack to keep the IP packet header in network byte order. Any host byte order processing is done in local variables and host byte order values are never[1] written to a packet. After this change a packet processed by the stack isn't modified at all[2] except for TTL. After this change a network stack hacker doesn't need to scratch his head trying to figure out what is the byte order at the given place in the stack. [1] One exception still remains. The raw sockets convert host byte order before pass a packet to an application. Probably this would remain for ages for compatibility. [2] The ip_input() still subtructs header len from ip->ip_len, but this is planned to be fixed soon. Reviewed by: luigi, Maxim Dounin <mdounin mdounin.ru> Tested by: ray, Olivier Cochard-Labbe <olivier cochard.me>
2012-10-22 21:09:03 +00:00
mtu = ip_next_mtu(ntohs(ip->ip_len), 0);
When doing IP forwarding with [FAST_]IPSEC compiled into the kernel ip_forward() would report back a zero MTU in ICMP needfrag messages because on a IPSEC SP lookup failure no MTU got computed. Fix this by changing the logic to compute a new MTU in any case if IPSEC didn't do it. Change MTU computation logic to use egress interface MTU if available or the next smaller MTU compared to the current packet size instead of falling back to a very small fixed MTU. Fix associated comment. PR: kern/91412 MFC after: 3 days
2006-01-24 17:57:19 +00:00
}
Update stats in struct ipstat using four new macros, IPSTAT_ADD(), IPSTAT_INC(), IPSTAT_SUB(), and IPSTAT_DEC(), rather than directly manipulating the fields across the kernel. This will make it easier to change the implementation of these statistics, such as using per-CPU versions of the data structures. MFC after: 3 days
2009-04-11 23:35:20 +00:00
IPSTAT_INC(ips_cantfrag);
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
break;
case ENOBUFS:
Do not call icmp_error() if ipfirewall(4) denied packet. PR: kern/10747, kern/18382
2000-05-15 18:41:01 +00:00
case EACCES: /* ipfw denied packet */
m_freem(mcopy);
Modify most routines returning 'struct ifaddr *' to return references rather than pointers, requiring callers to properly dispose of those references. The following routines now return references: ifaddr_byindex ifa_ifwithaddr ifa_ifwithbroadaddr ifa_ifwithdstaddr ifa_ifwithnet ifaof_ifpforaddr ifa_ifwithroute ifa_ifwithroute_fib rt_getifa rt_getifa_fib IFP_TO_IA ip_rtaddr in6_ifawithifp in6ifa_ifpforlinklocal in6ifa_ifpwithaddr in6_ifadd carp_iamatch6 ip6_getdstifaddr Remove unused macro which didn't have required referencing: IFP_TO_IA6 This closes many small races in which changes to interface or address lists while an ifaddr was in use could lead to use of freed memory (etc). In a few cases, add missing if_addr_list locking required to safely acquire references. Because of a lack of deep copying support, we accept a race in which an in6_ifaddr pointed to by mbuf tags and extracted with ip6_getdstifaddr() doesn't hold a reference while in transmit. Once we have mbuf tag deep copy support, this can be fixed. Reviewed by: bz Obtained from: Apple, Inc. (portions) MFC after: 6 weeks (portions)
2009-06-23 20:19:09 +00:00
if (ia != NULL)
ifa_free(&ia->ia_ifa);
Do not call icmp_error() if ipfirewall(4) denied packet. PR: kern/10747, kern/18382
2000-05-15 18:41:01 +00:00
return;
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
}
Modify most routines returning 'struct ifaddr *' to return references rather than pointers, requiring callers to properly dispose of those references. The following routines now return references: ifaddr_byindex ifa_ifwithaddr ifa_ifwithbroadaddr ifa_ifwithdstaddr ifa_ifwithnet ifaof_ifpforaddr ifa_ifwithroute ifa_ifwithroute_fib rt_getifa rt_getifa_fib IFP_TO_IA ip_rtaddr in6_ifawithifp in6ifa_ifpforlinklocal in6ifa_ifpwithaddr in6_ifadd carp_iamatch6 ip6_getdstifaddr Remove unused macro which didn't have required referencing: IFP_TO_IA6 This closes many small races in which changes to interface or address lists while an ifaddr was in use could lead to use of freed memory (etc). In a few cases, add missing if_addr_list locking required to safely acquire references. Because of a lack of deep copying support, we accept a race in which an in6_ifaddr pointed to by mbuf tags and extracted with ip6_getdstifaddr() doesn't hold a reference while in transmit. Once we have mbuf tag deep copy support, this can be fixed. Reviewed by: bz Obtained from: Apple, Inc. (portions) MFC after: 6 weeks (portions)
2009-06-23 20:19:09 +00:00
if (ia != NULL)
ifa_free(&ia->ia_ifa);
Pass icmp_error() the MTU argument directly instead of an interface pointer. This simplifies a couple of uses and removes some XXX workarounds.
2005-05-04 13:09:19 +00:00
icmp_error(mcopy, type, code, dest.s_addr, mtu);
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
}
Add a new socket option SO_TS_CLOCK to pick from several different clock sources to return timestamps when SO_TIMESTAMP is enabled. Two additional clock sources are: o nanosecond resolution realtime clock (equivalent of CLOCK_REALTIME); o nanosecond resolution monotonic clock (equivalent of CLOCK_MONOTONIC). In addition to this, this option provides unified interface to get bintime (equivalent of using SO_BINTIME), except it also supported with IPv6 where SO_BINTIME has never been supported. The long term plan is to depreciate SO_BINTIME and move everything to using SO_TS_CLOCK. Idea for this enhancement has been briefly discussed on the Net session during dev summit in Ottawa last June and the general input was positive. This change is believed to benefit network benchmarks/profiling as well as other scenarios where precise time of arrival measurement is necessary. There are two regression test cases as part of this commit: one extends unix domain test code (unix_cmsg) to test new SCM_XXX types and another one implementis totally new test case which exchanges UDP packets between two processes using both conventional methods (i.e. calling clock_gettime(2) before recv(2) and after send(2)), as well as using setsockopt()+recv() in receive path. The resulting delays are checked for sanity for all supported clock types. Reviewed by: adrian, gnn Differential Revision: https://reviews.freebsd.org/D9171
2017-01-16 17:46:38 +00:00
#define CHECK_SO_CT(sp, ct) \
(((sp->so_options & SO_TIMESTAMP) && (sp->so_ts_clock == ct)) ? 1 : 0)
Add the IP_RECVIF socket option, which supplies a packet's incoming interface using a sockaddr_dl. Fix the other packet-information socket options (SO_TIMESTAMP, IP_RECVDSTADDR) to work for multicast UDP and raw sockets as well. (They previously only worked for unicast UDP).
1996-11-11 04:56:32 +00:00
void
Move universally to ANSI C function declarations, with relatively consistent style(9)-ish layout.
2007-05-10 15:58:48 +00:00
ip_savecontrol(struct inpcb *inp, struct mbuf **mp, struct ip *ip,
struct mbuf *m)
Add the IP_RECVIF socket option, which supplies a packet's incoming interface using a sockaddr_dl. Fix the other packet-information socket options (SO_TIMESTAMP, IP_RECVDSTADDR) to work for multicast UDP and raw sockets as well. (They previously only worked for unicast UDP).
1996-11-11 04:56:32 +00:00
{
Step 1.5 of importing the network stack virtualization infrastructure from the vimage project, as per plan established at devsummit 08/08: http://wiki.freebsd.org/Image/Notes200808DevSummit Introduce INIT_VNET_*() initializer macros, VNET_FOREACH() iterator macros, and CURVNET_SET() context setting macros, all currently resolving to NOPs. Prepare for virtualization of selected SYSCTL objects by introducing a family of SYSCTL_V_*() macros, currently resolving to their global counterparts, i.e. SYSCTL_V_INT() == SYSCTL_INT(). Move selected #defines from sys/sys/vimage.h to newly introduced header files specific to virtualized subsystems (sys/net/vnet.h, sys/netinet/vinet.h etc.). All the changes are verified to have zero functional impact at this point in time by doing MD5 comparision between pre- and post-change object files(*). (*) netipsec/keysock.c did not validate depending on compile time options. Implemented by: julian, bz, brooks, zec Reviewed by: julian, bz, brooks, kris, rwatson, ... Approved by: julian (mentor) Obtained from: //depot/projects/vimage-commit2/... X-MFC after: never Sponsored by: NLnet Foundation, The FreeBSD Foundation
2008-10-02 15:37:58 +00:00
Add a new socket option SO_TS_CLOCK to pick from several different clock sources to return timestamps when SO_TIMESTAMP is enabled. Two additional clock sources are: o nanosecond resolution realtime clock (equivalent of CLOCK_REALTIME); o nanosecond resolution monotonic clock (equivalent of CLOCK_MONOTONIC). In addition to this, this option provides unified interface to get bintime (equivalent of using SO_BINTIME), except it also supported with IPv6 where SO_BINTIME has never been supported. The long term plan is to depreciate SO_BINTIME and move everything to using SO_TS_CLOCK. Idea for this enhancement has been briefly discussed on the Net session during dev summit in Ottawa last June and the general input was positive. This change is believed to benefit network benchmarks/profiling as well as other scenarios where precise time of arrival measurement is necessary. There are two regression test cases as part of this commit: one extends unix domain test code (unix_cmsg) to test new SCM_XXX types and another one implementis totally new test case which exchanges UDP packets between two processes using both conventional methods (i.e. calling clock_gettime(2) before recv(2) and after send(2)), as well as using setsockopt()+recv() in receive path. The resulting delays are checked for sanity for all supported clock types. Reviewed by: adrian, gnn Differential Revision: https://reviews.freebsd.org/D9171
2017-01-16 17:46:38 +00:00
if ((inp->inp_socket->so_options & SO_BINTIME) ||
CHECK_SO_CT(inp->inp_socket, SO_TS_BINTIME)) {
Introduce the SO_BINTIME option which takes a high-resolution timestamp at packet arrival. For benchmarking purposes SO_BINTIME is preferable to SO_TIMEVAL since it has higher resolution and lower overhead. Simultaneous use of the two options is possible and they will return consistent timestamps. This introduces an extra test and a function call for SO_TIMEVAL, but I have not been able to measure that.
2004-01-31 10:40:25 +00:00
struct bintime bt;
bintime(&bt);
Add a new socket option SO_TS_CLOCK to pick from several different clock sources to return timestamps when SO_TIMESTAMP is enabled. Two additional clock sources are: o nanosecond resolution realtime clock (equivalent of CLOCK_REALTIME); o nanosecond resolution monotonic clock (equivalent of CLOCK_MONOTONIC). In addition to this, this option provides unified interface to get bintime (equivalent of using SO_BINTIME), except it also supported with IPv6 where SO_BINTIME has never been supported. The long term plan is to depreciate SO_BINTIME and move everything to using SO_TS_CLOCK. Idea for this enhancement has been briefly discussed on the Net session during dev summit in Ottawa last June and the general input was positive. This change is believed to benefit network benchmarks/profiling as well as other scenarios where precise time of arrival measurement is necessary. There are two regression test cases as part of this commit: one extends unix domain test code (unix_cmsg) to test new SCM_XXX types and another one implementis totally new test case which exchanges UDP packets between two processes using both conventional methods (i.e. calling clock_gettime(2) before recv(2) and after send(2)), as well as using setsockopt()+recv() in receive path. The resulting delays are checked for sanity for all supported clock types. Reviewed by: adrian, gnn Differential Revision: https://reviews.freebsd.org/D9171
2017-01-16 17:46:38 +00:00
*mp = sbcreatecontrol((caddr_t)&bt, sizeof(bt),
SCM_BINTIME, SOL_SOCKET);
if (*mp)
mp = &(*mp)->m_next;
}
if (CHECK_SO_CT(inp->inp_socket, SO_TS_REALTIME_MICRO)) {
struct timeval tv;
microtime(&tv);
*mp = sbcreatecontrol((caddr_t)&tv, sizeof(tv),
SCM_TIMESTAMP, SOL_SOCKET);
if (*mp)
mp = &(*mp)->m_next;
} else if (CHECK_SO_CT(inp->inp_socket, SO_TS_REALTIME)) {
struct timespec ts;
nanotime(&ts);
*mp = sbcreatecontrol((caddr_t)&ts, sizeof(ts),
SCM_REALTIME, SOL_SOCKET);
if (*mp)
mp = &(*mp)->m_next;
} else if (CHECK_SO_CT(inp->inp_socket, SO_TS_MONOTONIC)) {
struct timespec ts;
nanouptime(&ts);
*mp = sbcreatecontrol((caddr_t)&ts, sizeof(ts),
SCM_MONOTONIC, SOL_SOCKET);
if (*mp)
mp = &(*mp)->m_next;
Back out my lats commit of locking down a socket, it conflicts with hsu's work. Requested by: hsu
2002-05-31 11:52:35 +00:00
}
Add the IP_RECVIF socket option, which supplies a packet's incoming interface using a sockaddr_dl. Fix the other packet-information socket options (SO_TIMESTAMP, IP_RECVDSTADDR) to work for multicast UDP and raw sockets as well. (They previously only worked for unicast UDP).
1996-11-11 04:56:32 +00:00
if (inp->inp_flags & INP_RECVDSTADDR) {
ip_savecontrol() style fixes. No functional changes. - fix indentation - put the operator at the end of the line for long statements - remove spaces between the type and the variable in a cast - remove excessive parentheses Tested by: md5
2013-02-20 15:44:40 +00:00
*mp = sbcreatecontrol((caddr_t)&ip->ip_dst,
Add the IP_RECVIF socket option, which supplies a packet's incoming interface using a sockaddr_dl. Fix the other packet-information socket options (SO_TIMESTAMP, IP_RECVDSTADDR) to work for multicast UDP and raw sockets as well. (They previously only worked for unicast UDP).
1996-11-11 04:56:32 +00:00
sizeof(struct in_addr), IP_RECVDSTADDR, IPPROTO_IP);
if (*mp)
mp = &(*mp)->m_next;
}
IP_RECVTTL socket option. Reviewed by: Stuart Cheshire <cheshire@apple.com>
2003-04-29 21:36:18 +00:00
if (inp->inp_flags & INP_RECVTTL) {
ip_savecontrol() style fixes. No functional changes. - fix indentation - put the operator at the end of the line for long statements - remove spaces between the type and the variable in a cast - remove excessive parentheses Tested by: md5
2013-02-20 15:44:40 +00:00
*mp = sbcreatecontrol((caddr_t)&ip->ip_ttl,
IP_RECVTTL socket option. Reviewed by: Stuart Cheshire <cheshire@apple.com>
2003-04-29 21:36:18 +00:00
sizeof(u_char), IP_RECVTTL, IPPROTO_IP);
if (*mp)
mp = &(*mp)->m_next;
}
Add the IP_RECVIF socket option, which supplies a packet's incoming interface using a sockaddr_dl. Fix the other packet-information socket options (SO_TIMESTAMP, IP_RECVDSTADDR) to work for multicast UDP and raw sockets as well. (They previously only worked for unicast UDP).
1996-11-11 04:56:32 +00:00
#ifdef notyet
/* XXX
* Moving these out of udp_input() made them even more broken
* than they already were.
*/
/* options were tossed already */
if (inp->inp_flags & INP_RECVOPTS) {
ip_savecontrol() style fixes. No functional changes. - fix indentation - put the operator at the end of the line for long statements - remove spaces between the type and the variable in a cast - remove excessive parentheses Tested by: md5
2013-02-20 15:44:40 +00:00
*mp = sbcreatecontrol((caddr_t)opts_deleted_above,
Add the IP_RECVIF socket option, which supplies a packet's incoming interface using a sockaddr_dl. Fix the other packet-information socket options (SO_TIMESTAMP, IP_RECVDSTADDR) to work for multicast UDP and raw sockets as well. (They previously only worked for unicast UDP).
1996-11-11 04:56:32 +00:00
sizeof(struct in_addr), IP_RECVOPTS, IPPROTO_IP);
if (*mp)
mp = &(*mp)->m_next;
}
/* ip_srcroute doesn't do what we want here, need to fix */
if (inp->inp_flags & INP_RECVRETOPTS) {
ip_savecontrol() style fixes. No functional changes. - fix indentation - put the operator at the end of the line for long statements - remove spaces between the type and the variable in a cast - remove excessive parentheses Tested by: md5
2013-02-20 15:44:40 +00:00
*mp = sbcreatecontrol((caddr_t)ip_srcroute(m),
Add the IP_RECVIF socket option, which supplies a packet's incoming interface using a sockaddr_dl. Fix the other packet-information socket options (SO_TIMESTAMP, IP_RECVDSTADDR) to work for multicast UDP and raw sockets as well. (They previously only worked for unicast UDP).
1996-11-11 04:56:32 +00:00
sizeof(struct in_addr), IP_RECVRETOPTS, IPPROTO_IP);
if (*mp)
mp = &(*mp)->m_next;
}
#endif
if (inp->inp_flags & INP_RECVIF) {
Return the entire if info, rather than just the index number. (at least try) Interface index numbers are an abomination that should go away (at least in that form)
1997-11-05 02:51:32 +00:00
struct ifnet *ifp;
struct sdlbuf {
struct sockaddr_dl sdl;
u_char pad[32];
} sdlbuf;
struct sockaddr_dl *sdp;
struct sockaddr_dl *sdl2 = &sdlbuf.sdl;
ip_savecontrol() style fixes. No functional changes. - fix indentation - put the operator at the end of the line for long statements - remove spaces between the type and the variable in a cast - remove excessive parentheses Tested by: md5
2013-02-20 15:44:40 +00:00
if ((ifp = m->m_pkthdr.rcvif) &&
ifp->if_index && ifp->if_index <= V_if_index) {
- Store pointer to the link-level address right in "struct ifnet" rather than in ifindex_table[]; all (except one) accesses are through ifp anyway. IF_LLADDR() works faster, and all (except one) ifaddr_byindex() users were converted to use ifp->if_addr. - Stop storing a (pointer to) Ethernet address in "struct arpcom", and drop the IFP2ENADDR() macro; all users have been converted to use IF_LLADDR() instead.
2005-11-11 16:04:59 +00:00
sdp = (struct sockaddr_dl *)ifp->if_addr->ifa_addr;
Return the entire if info, rather than just the index number. (at least try) Interface index numbers are an abomination that should go away (at least in that form)
1997-11-05 02:51:32 +00:00
/*
* Change our mind and don't try copy.
*/
ip_savecontrol() style fixes. No functional changes. - fix indentation - put the operator at the end of the line for long statements - remove spaces between the type and the variable in a cast - remove excessive parentheses Tested by: md5
2013-02-20 15:44:40 +00:00
if (sdp->sdl_family != AF_LINK ||
sdp->sdl_len > sizeof(sdlbuf)) {
Return the entire if info, rather than just the index number. (at least try) Interface index numbers are an abomination that should go away (at least in that form)
1997-11-05 02:51:32 +00:00
goto makedummy;
}
bcopy(sdp, sdl2, sdp->sdl_len);
} else {
makedummy:
ip_savecontrol() style fixes. No functional changes. - fix indentation - put the operator at the end of the line for long statements - remove spaces between the type and the variable in a cast - remove excessive parentheses Tested by: md5
2013-02-20 15:44:40 +00:00
sdl2->sdl_len =
offsetof(struct sockaddr_dl, sdl_data[0]);
Return the entire if info, rather than just the index number. (at least try) Interface index numbers are an abomination that should go away (at least in that form)
1997-11-05 02:51:32 +00:00
sdl2->sdl_family = AF_LINK;
sdl2->sdl_index = 0;
sdl2->sdl_nlen = sdl2->sdl_alen = sdl2->sdl_slen = 0;
}
ip_savecontrol() style fixes. No functional changes. - fix indentation - put the operator at the end of the line for long statements - remove spaces between the type and the variable in a cast - remove excessive parentheses Tested by: md5
2013-02-20 15:44:40 +00:00
*mp = sbcreatecontrol((caddr_t)sdl2, sdl2->sdl_len,
IP_RECVIF, IPPROTO_IP);
Add the IP_RECVIF socket option, which supplies a packet's incoming interface using a sockaddr_dl. Fix the other packet-information socket options (SO_TIMESTAMP, IP_RECVDSTADDR) to work for multicast UDP and raw sockets as well. (They previously only worked for unicast UDP).
1996-11-11 04:56:32 +00:00
if (*mp)
mp = &(*mp)->m_next;
}
Add a IP_RECVTOS socket option to receive for received UDP/IPv4 packets a cmsg of type IP_RECVTOS which contains the TOS byte. Much like IP_RECVTTL does for TTL. This allows to implement a protocol on top of UDP and implementing ECN. MFC after: 3 days
2012-06-12 14:02:38 +00:00
if (inp->inp_flags & INP_RECVTOS) {
ip_savecontrol() style fixes. No functional changes. - fix indentation - put the operator at the end of the line for long statements - remove spaces between the type and the variable in a cast - remove excessive parentheses Tested by: md5
2013-02-20 15:44:40 +00:00
*mp = sbcreatecontrol((caddr_t)&ip->ip_tos,
Add a IP_RECVTOS socket option to receive for received UDP/IPv4 packets a cmsg of type IP_RECVTOS which contains the TOS byte. Much like IP_RECVTTL does for TTL. This allows to implement a protocol on top of UDP and implementing ECN. MFC after: 3 days
2012-06-12 14:02:38 +00:00
sizeof(u_char), IP_RECVTOS, IPPROTO_IP);
if (*mp)
mp = &(*mp)->m_next;
}
Add support for receiving and setting flowtype, flowid and RSS bucket information as part of recvmsg(). This is primarily used for debugging/verification of the various processing paths in the IP, PCB and driver layers. Unfortunately the current implementation of the control message path results in a ~10% or so drop in UDP frame throughput when it's used. Differential Revision: https://reviews.freebsd.org/D527 Reviewed by: grehan
2014-09-09 01:45:39 +00:00
if (inp->inp_flags2 & INP_RECVFLOWID) {
uint32_t flowid, flow_type;
flowid = m->m_pkthdr.flowid;
flow_type = M_HASHTYPE_GET(m);
/*
* XXX should handle the failure of one or the
* other - don't populate both?
*/
*mp = sbcreatecontrol((caddr_t) &flowid,
sizeof(uint32_t), IP_FLOWID, IPPROTO_IP);
if (*mp)
mp = &(*mp)->m_next;
*mp = sbcreatecontrol((caddr_t) &flow_type,
sizeof(uint32_t), IP_FLOWTYPE, IPPROTO_IP);
if (*mp)
mp = &(*mp)->m_next;
}
#ifdef RSS
if (inp->inp_flags2 & INP_RECVRSSBUCKETID) {
uint32_t flowid, flow_type;
uint32_t rss_bucketid;
flowid = m->m_pkthdr.flowid;
flow_type = M_HASHTYPE_GET(m);
if (rss_hash2bucket(flowid, flow_type, &rss_bucketid) == 0) {
*mp = sbcreatecontrol((caddr_t) &rss_bucketid,
sizeof(uint32_t), IP_RSSBUCKETID, IPPROTO_IP);
if (*mp)
mp = &(*mp)->m_next;
}
}
#endif
Add the IP_RECVIF socket option, which supplies a packet's incoming interface using a sockaddr_dl. Fix the other packet-information socket options (SO_TIMESTAMP, IP_RECVDSTADDR) to work for multicast UDP and raw sockets as well. (They previously only worked for unicast UDP).
1996-11-11 04:56:32 +00:00
}
Move some global variables in more appropriate places. Add XXX comments to mark places which need to be taken care of if we want to remove this part of the kernel from Giant. Add a comment on a potential performance problem with ip_forward()
2002-06-23 20:48:26 +00:00
/*
Replace a comment about RSVP/mrouting with a different but similar comment explaining that some more locking is needed. The routing pieces are done, but there is an interlocking issue between optionally compiled code and mandatory code. Spotted by: kris
2007-03-25 21:49:50 +00:00
* XXXRW: Multicast routing code in ip_mroute.c is generally MPSAFE, but the
* ip_rsvp and ip_rsvp_on variables need to be interlocked with rsvp_on
* locking. This code remains in ip_input.c as ip_mroute.c is optionally
* compiled.
Move some global variables in more appropriate places. Add XXX comments to mark places which need to be taken care of if we want to remove this part of the kernel from Giant. Add a comment on a potential performance problem with ip_forward()
2002-06-23 20:48:26 +00:00
*/
After some off-list discussion, revert a number of changes to the DPCPU_DEFINE and VNET_DEFINE macros, as these cause problems for various people working on the affected files. A better long-term solution is still being considered. This reversal may give some modules empty set_pcpu or set_vnet sections, but these are harmless. Changes reverted: ------------------------------------------------------------------------ r215318 | dim | 2010-11-14 21:40:55 +0100 (Sun, 14 Nov 2010) | 4 lines Instead of unconditionally emitting .globl's for the __start_set_xxx and __stop_set_xxx symbols, only emit them when the set_vnet or set_pcpu sections are actually defined. ------------------------------------------------------------------------ r215317 | dim | 2010-11-14 21:38:11 +0100 (Sun, 14 Nov 2010) | 3 lines Apply the STATIC_VNET_DEFINE and STATIC_DPCPU_DEFINE macros throughout the tree. ------------------------------------------------------------------------ r215316 | dim | 2010-11-14 21:23:02 +0100 (Sun, 14 Nov 2010) | 2 lines Add macros to define static instances of VNET_DEFINE and DPCPU_DEFINE.
2010-11-22 19:32:54 +00:00
static VNET_DEFINE(int, ip_rsvp_on);
MFP4: @176978-176982, 176984, 176990-176994, 177441 "Whitspace" churn after the VIMAGE/VNET whirls. Remove the need for some "init" functions within the network stack, like pim6_init(), icmp_init() or significantly shorten others like ip6_init() and nd6_init(), using static initialization again where possible and formerly missed. Move (most) variables back to the place they used to be before the container structs and VIMAGE_GLOABLS (before r185088) and try to reduce the diff to stable/7 and earlier as good as possible, to help out-of-tree consumers to update from 6.x or 7.x to 8 or 9. This also removes some header file pollution for putatively static global variables. Revert VIMAGE specific changes in ipfilter::ip_auth.c, that are no longer needed. Reviewed by: jhb Discussed with: rwatson Sponsored by: The FreeBSD Foundation Sponsored by: CK Software GmbH MFC after: 6 days
2010-04-29 11:52:42 +00:00
VNET_DEFINE(struct socket *, ip_rsvpd);
#define V_ip_rsvp_on VNET(ip_rsvp_on)
Initial get-the-easy-case-working upgrade of the multicast code to something more recent than the ancient 1.2 release contained in 4.4. This code has the following advantages as compared to previous versions (culled from the README file for the SunOS release): - True multicast delivery - Configurable rate-limiting of forwarded multicast traffic on each physical interface or tunnel, using a token-bucket limiter. - Simplistic classification of packets for prioritized dropping. - Administrative scoping of multicast address ranges. - Faster detection of hosts leaving groups. - Support for multicast traceroute (code not yet available). - Support for RSVP, the Resource Reservation Protocol. What still needs to be done: - The multicast forwarder needs testing. - The multicast routing daemon needs to be ported. - Network interface drivers need to have the `#ifdef MULTICAST' goop ripped out of them. - The IGMP code should probably be bogon-tested. Some notes about the porting process: In some cases, the Berkeley people decided to incorporate functionality from later releases of the multicast code, but then had to do things differently. As a result, if you look at Deering's patches, and then look at our code, it is not always obvious whether the patch even applies. Let the reader beware. I ran ip_mroute.c through several passes of `unifdef' to get rid of useless grot, and to permanently enable the RSVP support, which we will include as standard. Ported by: Garrett Wollman Submitted by: Steve Deering and Ajit Thyagarajan (among others)
1994-09-06 22:42:31 +00:00
int
ip_rsvp_init(struct socket *so)
{
Step 1.5 of importing the network stack virtualization infrastructure from the vimage project, as per plan established at devsummit 08/08: http://wiki.freebsd.org/Image/Notes200808DevSummit Introduce INIT_VNET_*() initializer macros, VNET_FOREACH() iterator macros, and CURVNET_SET() context setting macros, all currently resolving to NOPs. Prepare for virtualization of selected SYSCTL objects by introducing a family of SYSCTL_V_*() macros, currently resolving to their global counterparts, i.e. SYSCTL_V_INT() == SYSCTL_INT(). Move selected #defines from sys/sys/vimage.h to newly introduced header files specific to virtualized subsystems (sys/net/vnet.h, sys/netinet/vinet.h etc.). All the changes are verified to have zero functional impact at this point in time by doing MD5 comparision between pre- and post-change object files(*). (*) netipsec/keysock.c did not validate depending on compile time options. Implemented by: julian, bz, brooks, zec Reviewed by: julian, bz, brooks, kris, rwatson, ... Approved by: julian (mentor) Obtained from: //depot/projects/vimage-commit2/... X-MFC after: never Sponsored by: NLnet Foundation, The FreeBSD Foundation
2008-10-02 15:37:58 +00:00
Initial get-the-easy-case-working upgrade of the multicast code to something more recent than the ancient 1.2 release contained in 4.4. This code has the following advantages as compared to previous versions (culled from the README file for the SunOS release): - True multicast delivery - Configurable rate-limiting of forwarded multicast traffic on each physical interface or tunnel, using a token-bucket limiter. - Simplistic classification of packets for prioritized dropping. - Administrative scoping of multicast address ranges. - Faster detection of hosts leaving groups. - Support for multicast traceroute (code not yet available). - Support for RSVP, the Resource Reservation Protocol. What still needs to be done: - The multicast forwarder needs testing. - The multicast routing daemon needs to be ported. - Network interface drivers need to have the `#ifdef MULTICAST' goop ripped out of them. - The IGMP code should probably be bogon-tested. Some notes about the porting process: In some cases, the Berkeley people decided to incorporate functionality from later releases of the multicast code, but then had to do things differently. As a result, if you look at Deering's patches, and then look at our code, it is not always obvious whether the patch even applies. Let the reader beware. I ran ip_mroute.c through several passes of `unifdef' to get rid of useless grot, and to permanently enable the RSVP support, which we will include as standard. Ported by: Garrett Wollman Submitted by: Steve Deering and Ajit Thyagarajan (among others)
1994-09-06 22:42:31 +00:00
if (so->so_type != SOCK_RAW ||
so->so_proto->pr_protocol != IPPROTO_RSVP)
Massive cleanup of the ip_mroute code. No functional changes, but: + the mrouting module now should behave the same as the compiled-in version (it did not before, some of the rsvp code was not loaded properly); + netinet/ip_mroute.c is now truly optional; + removed some redundant/unused code; + changed many instances of '0' to NULL and INADDR_ANY as appropriate; + removed several static variables to make the code more SMP-friendly; + fixed some minor bugs in the mrouting code (mostly, incorrect return values from functions). This commit is also a prerequisite to the addition of support for PIM, which i would like to put in before DP2 (it does not change any of the existing APIs, anyways). Note, in the process we found out that some device drivers fail to properly handle changes in IFF_ALLMULTI, leading to interesting behaviour when a multicast router is started. This bug is not corrected by this commit, and will be fixed with a separate commit. Detailed changes: -------------------- netinet/ip_mroute.c all the above. conf/files make ip_mroute.c optional net/route.c fix mrt_ioctl hook netinet/ip_input.c fix ip_mforward hook, move rsvp_input() here together with other rsvp code, and a couple of indentation fixes. netinet/ip_output.c fix ip_mforward and ip_mcast_src hooks netinet/ip_var.h rsvp function hooks netinet/raw_ip.c hooks for mrouting and rsvp functions, plus interface cleanup. netinet/ip_mroute.h remove an unused and optional field from a struct Most of the code is from Pavlin Radoslavov and the XORP project Reviewed by: sam MFC after: 1 week
2002-11-15 22:53:53 +00:00
return EOPNOTSUPP;
Initial get-the-easy-case-working upgrade of the multicast code to something more recent than the ancient 1.2 release contained in 4.4. This code has the following advantages as compared to previous versions (culled from the README file for the SunOS release): - True multicast delivery - Configurable rate-limiting of forwarded multicast traffic on each physical interface or tunnel, using a token-bucket limiter. - Simplistic classification of packets for prioritized dropping. - Administrative scoping of multicast address ranges. - Faster detection of hosts leaving groups. - Support for multicast traceroute (code not yet available). - Support for RSVP, the Resource Reservation Protocol. What still needs to be done: - The multicast forwarder needs testing. - The multicast routing daemon needs to be ported. - Network interface drivers need to have the `#ifdef MULTICAST' goop ripped out of them. - The IGMP code should probably be bogon-tested. Some notes about the porting process: In some cases, the Berkeley people decided to incorporate functionality from later releases of the multicast code, but then had to do things differently. As a result, if you look at Deering's patches, and then look at our code, it is not always obvious whether the patch even applies. Let the reader beware. I ran ip_mroute.c through several passes of `unifdef' to get rid of useless grot, and to permanently enable the RSVP support, which we will include as standard. Ported by: Garrett Wollman Submitted by: Steve Deering and Ajit Thyagarajan (among others)
1994-09-06 22:42:31 +00:00
Commit step 1 of the vimage project, (network stack) virtualization work done by Marko Zec (zec@). This is the first in a series of commits over the course of the next few weeks. Mark all uses of global variables to be virtualized with a V_ prefix. Use macros to map them back to their global names for now, so this is a NOP change only. We hope to have caught at least 85-90% of what is needed so we do not invalidate a lot of outstanding patches again. Obtained from: //depot/projects/vimage-commit2/... Reviewed by: brooks, des, ed, mav, julian, jamie, kris, rwatson, zec, ... (various people I forgot, different versions) md5 (with a bit of help) Sponsored by: NLnet Foundation, The FreeBSD Foundation X-MFC after: never V_Commit_Message_Reviewed_By: more people than the patch
2008-08-17 23:27:27 +00:00
if (V_ip_rsvpd != NULL)
Massive cleanup of the ip_mroute code. No functional changes, but: + the mrouting module now should behave the same as the compiled-in version (it did not before, some of the rsvp code was not loaded properly); + netinet/ip_mroute.c is now truly optional; + removed some redundant/unused code; + changed many instances of '0' to NULL and INADDR_ANY as appropriate; + removed several static variables to make the code more SMP-friendly; + fixed some minor bugs in the mrouting code (mostly, incorrect return values from functions). This commit is also a prerequisite to the addition of support for PIM, which i would like to put in before DP2 (it does not change any of the existing APIs, anyways). Note, in the process we found out that some device drivers fail to properly handle changes in IFF_ALLMULTI, leading to interesting behaviour when a multicast router is started. This bug is not corrected by this commit, and will be fixed with a separate commit. Detailed changes: -------------------- netinet/ip_mroute.c all the above. conf/files make ip_mroute.c optional net/route.c fix mrt_ioctl hook netinet/ip_input.c fix ip_mforward hook, move rsvp_input() here together with other rsvp code, and a couple of indentation fixes. netinet/ip_output.c fix ip_mforward and ip_mcast_src hooks netinet/ip_var.h rsvp function hooks netinet/raw_ip.c hooks for mrouting and rsvp functions, plus interface cleanup. netinet/ip_mroute.h remove an unused and optional field from a struct Most of the code is from Pavlin Radoslavov and the XORP project Reviewed by: sam MFC after: 1 week
2002-11-15 22:53:53 +00:00
return EADDRINUSE;
Initial get-the-easy-case-working upgrade of the multicast code to something more recent than the ancient 1.2 release contained in 4.4. This code has the following advantages as compared to previous versions (culled from the README file for the SunOS release): - True multicast delivery - Configurable rate-limiting of forwarded multicast traffic on each physical interface or tunnel, using a token-bucket limiter. - Simplistic classification of packets for prioritized dropping. - Administrative scoping of multicast address ranges. - Faster detection of hosts leaving groups. - Support for multicast traceroute (code not yet available). - Support for RSVP, the Resource Reservation Protocol. What still needs to be done: - The multicast forwarder needs testing. - The multicast routing daemon needs to be ported. - Network interface drivers need to have the `#ifdef MULTICAST' goop ripped out of them. - The IGMP code should probably be bogon-tested. Some notes about the porting process: In some cases, the Berkeley people decided to incorporate functionality from later releases of the multicast code, but then had to do things differently. As a result, if you look at Deering's patches, and then look at our code, it is not always obvious whether the patch even applies. Let the reader beware. I ran ip_mroute.c through several passes of `unifdef' to get rid of useless grot, and to permanently enable the RSVP support, which we will include as standard. Ported by: Garrett Wollman Submitted by: Steve Deering and Ajit Thyagarajan (among others)
1994-09-06 22:42:31 +00:00
Commit step 1 of the vimage project, (network stack) virtualization work done by Marko Zec (zec@). This is the first in a series of commits over the course of the next few weeks. Mark all uses of global variables to be virtualized with a V_ prefix. Use macros to map them back to their global names for now, so this is a NOP change only. We hope to have caught at least 85-90% of what is needed so we do not invalidate a lot of outstanding patches again. Obtained from: //depot/projects/vimage-commit2/... Reviewed by: brooks, des, ed, mav, julian, jamie, kris, rwatson, zec, ... (various people I forgot, different versions) md5 (with a bit of help) Sponsored by: NLnet Foundation, The FreeBSD Foundation X-MFC after: never V_Commit_Message_Reviewed_By: more people than the patch
2008-08-17 23:27:27 +00:00
V_ip_rsvpd = so;
Kernel side of 3.5 multicast routing code, based on work by Bill Fenner and other work done here. The LKM support is probably broken, but it still compiles and will be fixed later.
1995-06-13 17:51:16 +00:00
/*
* This may seem silly, but we need to be sure we don't over-increment
* the RSVP counter, in case something slips up.
*/
Commit step 1 of the vimage project, (network stack) virtualization work done by Marko Zec (zec@). This is the first in a series of commits over the course of the next few weeks. Mark all uses of global variables to be virtualized with a V_ prefix. Use macros to map them back to their global names for now, so this is a NOP change only. We hope to have caught at least 85-90% of what is needed so we do not invalidate a lot of outstanding patches again. Obtained from: //depot/projects/vimage-commit2/... Reviewed by: brooks, des, ed, mav, julian, jamie, kris, rwatson, zec, ... (various people I forgot, different versions) md5 (with a bit of help) Sponsored by: NLnet Foundation, The FreeBSD Foundation X-MFC after: never V_Commit_Message_Reviewed_By: more people than the patch
2008-08-17 23:27:27 +00:00
if (!V_ip_rsvp_on) {
V_ip_rsvp_on = 1;
V_rsvp_on++;
Kernel side of 3.5 multicast routing code, based on work by Bill Fenner and other work done here. The LKM support is probably broken, but it still compiles and will be fixed later.
1995-06-13 17:51:16 +00:00
}
Initial get-the-easy-case-working upgrade of the multicast code to something more recent than the ancient 1.2 release contained in 4.4. This code has the following advantages as compared to previous versions (culled from the README file for the SunOS release): - True multicast delivery - Configurable rate-limiting of forwarded multicast traffic on each physical interface or tunnel, using a token-bucket limiter. - Simplistic classification of packets for prioritized dropping. - Administrative scoping of multicast address ranges. - Faster detection of hosts leaving groups. - Support for multicast traceroute (code not yet available). - Support for RSVP, the Resource Reservation Protocol. What still needs to be done: - The multicast forwarder needs testing. - The multicast routing daemon needs to be ported. - Network interface drivers need to have the `#ifdef MULTICAST' goop ripped out of them. - The IGMP code should probably be bogon-tested. Some notes about the porting process: In some cases, the Berkeley people decided to incorporate functionality from later releases of the multicast code, but then had to do things differently. As a result, if you look at Deering's patches, and then look at our code, it is not always obvious whether the patch even applies. Let the reader beware. I ran ip_mroute.c through several passes of `unifdef' to get rid of useless grot, and to permanently enable the RSVP support, which we will include as standard. Ported by: Garrett Wollman Submitted by: Steve Deering and Ajit Thyagarajan (among others)
1994-09-06 22:42:31 +00:00
return 0;
}
int
ip_rsvp_done(void)
{
Step 1.5 of importing the network stack virtualization infrastructure from the vimage project, as per plan established at devsummit 08/08: http://wiki.freebsd.org/Image/Notes200808DevSummit Introduce INIT_VNET_*() initializer macros, VNET_FOREACH() iterator macros, and CURVNET_SET() context setting macros, all currently resolving to NOPs. Prepare for virtualization of selected SYSCTL objects by introducing a family of SYSCTL_V_*() macros, currently resolving to their global counterparts, i.e. SYSCTL_V_INT() == SYSCTL_INT(). Move selected #defines from sys/sys/vimage.h to newly introduced header files specific to virtualized subsystems (sys/net/vnet.h, sys/netinet/vinet.h etc.). All the changes are verified to have zero functional impact at this point in time by doing MD5 comparision between pre- and post-change object files(*). (*) netipsec/keysock.c did not validate depending on compile time options. Implemented by: julian, bz, brooks, zec Reviewed by: julian, bz, brooks, kris, rwatson, ... Approved by: julian (mentor) Obtained from: //depot/projects/vimage-commit2/... X-MFC after: never Sponsored by: NLnet Foundation, The FreeBSD Foundation
2008-10-02 15:37:58 +00:00
Commit step 1 of the vimage project, (network stack) virtualization work done by Marko Zec (zec@). This is the first in a series of commits over the course of the next few weeks. Mark all uses of global variables to be virtualized with a V_ prefix. Use macros to map them back to their global names for now, so this is a NOP change only. We hope to have caught at least 85-90% of what is needed so we do not invalidate a lot of outstanding patches again. Obtained from: //depot/projects/vimage-commit2/... Reviewed by: brooks, des, ed, mav, julian, jamie, kris, rwatson, zec, ... (various people I forgot, different versions) md5 (with a bit of help) Sponsored by: NLnet Foundation, The FreeBSD Foundation X-MFC after: never V_Commit_Message_Reviewed_By: more people than the patch
2008-08-17 23:27:27 +00:00
V_ip_rsvpd = NULL;
Kernel side of 3.5 multicast routing code, based on work by Bill Fenner and other work done here. The LKM support is probably broken, but it still compiles and will be fixed later.
1995-06-13 17:51:16 +00:00
/*
* This may seem silly, but we need to be sure we don't over-decrement
* the RSVP counter, in case something slips up.
*/
Commit step 1 of the vimage project, (network stack) virtualization work done by Marko Zec (zec@). This is the first in a series of commits over the course of the next few weeks. Mark all uses of global variables to be virtualized with a V_ prefix. Use macros to map them back to their global names for now, so this is a NOP change only. We hope to have caught at least 85-90% of what is needed so we do not invalidate a lot of outstanding patches again. Obtained from: //depot/projects/vimage-commit2/... Reviewed by: brooks, des, ed, mav, julian, jamie, kris, rwatson, zec, ... (various people I forgot, different versions) md5 (with a bit of help) Sponsored by: NLnet Foundation, The FreeBSD Foundation X-MFC after: never V_Commit_Message_Reviewed_By: more people than the patch
2008-08-17 23:27:27 +00:00
if (V_ip_rsvp_on) {
V_ip_rsvp_on = 0;
V_rsvp_on--;
Kernel side of 3.5 multicast routing code, based on work by Bill Fenner and other work done here. The LKM support is probably broken, but it still compiles and will be fixed later.
1995-06-13 17:51:16 +00:00
}
Initial get-the-easy-case-working upgrade of the multicast code to something more recent than the ancient 1.2 release contained in 4.4. This code has the following advantages as compared to previous versions (culled from the README file for the SunOS release): - True multicast delivery - Configurable rate-limiting of forwarded multicast traffic on each physical interface or tunnel, using a token-bucket limiter. - Simplistic classification of packets for prioritized dropping. - Administrative scoping of multicast address ranges. - Faster detection of hosts leaving groups. - Support for multicast traceroute (code not yet available). - Support for RSVP, the Resource Reservation Protocol. What still needs to be done: - The multicast forwarder needs testing. - The multicast routing daemon needs to be ported. - Network interface drivers need to have the `#ifdef MULTICAST' goop ripped out of them. - The IGMP code should probably be bogon-tested. Some notes about the porting process: In some cases, the Berkeley people decided to incorporate functionality from later releases of the multicast code, but then had to do things differently. As a result, if you look at Deering's patches, and then look at our code, it is not always obvious whether the patch even applies. Let the reader beware. I ran ip_mroute.c through several passes of `unifdef' to get rid of useless grot, and to permanently enable the RSVP support, which we will include as standard. Ported by: Garrett Wollman Submitted by: Steve Deering and Ajit Thyagarajan (among others)
1994-09-06 22:42:31 +00:00
return 0;
}
Massive cleanup of the ip_mroute code. No functional changes, but: + the mrouting module now should behave the same as the compiled-in version (it did not before, some of the rsvp code was not loaded properly); + netinet/ip_mroute.c is now truly optional; + removed some redundant/unused code; + changed many instances of '0' to NULL and INADDR_ANY as appropriate; + removed several static variables to make the code more SMP-friendly; + fixed some minor bugs in the mrouting code (mostly, incorrect return values from functions). This commit is also a prerequisite to the addition of support for PIM, which i would like to put in before DP2 (it does not change any of the existing APIs, anyways). Note, in the process we found out that some device drivers fail to properly handle changes in IFF_ALLMULTI, leading to interesting behaviour when a multicast router is started. This bug is not corrected by this commit, and will be fixed with a separate commit. Detailed changes: -------------------- netinet/ip_mroute.c all the above. conf/files make ip_mroute.c optional net/route.c fix mrt_ioctl hook netinet/ip_input.c fix ip_mforward hook, move rsvp_input() here together with other rsvp code, and a couple of indentation fixes. netinet/ip_output.c fix ip_mforward and ip_mcast_src hooks netinet/ip_var.h rsvp function hooks netinet/raw_ip.c hooks for mrouting and rsvp functions, plus interface cleanup. netinet/ip_mroute.h remove an unused and optional field from a struct Most of the code is from Pavlin Radoslavov and the XORP project Reviewed by: sam MFC after: 1 week
2002-11-15 22:53:53 +00:00
Merge 'struct ip6protosw' and 'struct protosw' into one. Now we have only one protocol switch structure that is shared between ipv4 and ipv6. Phabric: D476 Reviewed by: jhb
2014-08-08 01:57:15 +00:00
int
rsvp_input(struct mbuf **mp, int *offp, int proto)
Massive cleanup of the ip_mroute code. No functional changes, but: + the mrouting module now should behave the same as the compiled-in version (it did not before, some of the rsvp code was not loaded properly); + netinet/ip_mroute.c is now truly optional; + removed some redundant/unused code; + changed many instances of '0' to NULL and INADDR_ANY as appropriate; + removed several static variables to make the code more SMP-friendly; + fixed some minor bugs in the mrouting code (mostly, incorrect return values from functions). This commit is also a prerequisite to the addition of support for PIM, which i would like to put in before DP2 (it does not change any of the existing APIs, anyways). Note, in the process we found out that some device drivers fail to properly handle changes in IFF_ALLMULTI, leading to interesting behaviour when a multicast router is started. This bug is not corrected by this commit, and will be fixed with a separate commit. Detailed changes: -------------------- netinet/ip_mroute.c all the above. conf/files make ip_mroute.c optional net/route.c fix mrt_ioctl hook netinet/ip_input.c fix ip_mforward hook, move rsvp_input() here together with other rsvp code, and a couple of indentation fixes. netinet/ip_output.c fix ip_mforward and ip_mcast_src hooks netinet/ip_var.h rsvp function hooks netinet/raw_ip.c hooks for mrouting and rsvp functions, plus interface cleanup. netinet/ip_mroute.h remove an unused and optional field from a struct Most of the code is from Pavlin Radoslavov and the XORP project Reviewed by: sam MFC after: 1 week
2002-11-15 22:53:53 +00:00
{
Merge 'struct ip6protosw' and 'struct protosw' into one. Now we have only one protocol switch structure that is shared between ipv4 and ipv6. Phabric: D476 Reviewed by: jhb
2014-08-08 01:57:15 +00:00
struct mbuf *m;
m = *mp;
*mp = NULL;
Step 1.5 of importing the network stack virtualization infrastructure from the vimage project, as per plan established at devsummit 08/08: http://wiki.freebsd.org/Image/Notes200808DevSummit Introduce INIT_VNET_*() initializer macros, VNET_FOREACH() iterator macros, and CURVNET_SET() context setting macros, all currently resolving to NOPs. Prepare for virtualization of selected SYSCTL objects by introducing a family of SYSCTL_V_*() macros, currently resolving to their global counterparts, i.e. SYSCTL_V_INT() == SYSCTL_INT(). Move selected #defines from sys/sys/vimage.h to newly introduced header files specific to virtualized subsystems (sys/net/vnet.h, sys/netinet/vinet.h etc.). All the changes are verified to have zero functional impact at this point in time by doing MD5 comparision between pre- and post-change object files(*). (*) netipsec/keysock.c did not validate depending on compile time options. Implemented by: julian, bz, brooks, zec Reviewed by: julian, bz, brooks, kris, rwatson, ... Approved by: julian (mentor) Obtained from: //depot/projects/vimage-commit2/... X-MFC after: never Sponsored by: NLnet Foundation, The FreeBSD Foundation
2008-10-02 15:37:58 +00:00
Massive cleanup of the ip_mroute code. No functional changes, but: + the mrouting module now should behave the same as the compiled-in version (it did not before, some of the rsvp code was not loaded properly); + netinet/ip_mroute.c is now truly optional; + removed some redundant/unused code; + changed many instances of '0' to NULL and INADDR_ANY as appropriate; + removed several static variables to make the code more SMP-friendly; + fixed some minor bugs in the mrouting code (mostly, incorrect return values from functions). This commit is also a prerequisite to the addition of support for PIM, which i would like to put in before DP2 (it does not change any of the existing APIs, anyways). Note, in the process we found out that some device drivers fail to properly handle changes in IFF_ALLMULTI, leading to interesting behaviour when a multicast router is started. This bug is not corrected by this commit, and will be fixed with a separate commit. Detailed changes: -------------------- netinet/ip_mroute.c all the above. conf/files make ip_mroute.c optional net/route.c fix mrt_ioctl hook netinet/ip_input.c fix ip_mforward hook, move rsvp_input() here together with other rsvp code, and a couple of indentation fixes. netinet/ip_output.c fix ip_mforward and ip_mcast_src hooks netinet/ip_var.h rsvp function hooks netinet/raw_ip.c hooks for mrouting and rsvp functions, plus interface cleanup. netinet/ip_mroute.h remove an unused and optional field from a struct Most of the code is from Pavlin Radoslavov and the XORP project Reviewed by: sam MFC after: 1 week
2002-11-15 22:53:53 +00:00
if (rsvp_input_p) { /* call the real one if loaded */
Merge 'struct ip6protosw' and 'struct protosw' into one. Now we have only one protocol switch structure that is shared between ipv4 and ipv6. Phabric: D476 Reviewed by: jhb
2014-08-08 01:57:15 +00:00
*mp = m;
rsvp_input_p(mp, offp, proto);
return (IPPROTO_DONE);
Massive cleanup of the ip_mroute code. No functional changes, but: + the mrouting module now should behave the same as the compiled-in version (it did not before, some of the rsvp code was not loaded properly); + netinet/ip_mroute.c is now truly optional; + removed some redundant/unused code; + changed many instances of '0' to NULL and INADDR_ANY as appropriate; + removed several static variables to make the code more SMP-friendly; + fixed some minor bugs in the mrouting code (mostly, incorrect return values from functions). This commit is also a prerequisite to the addition of support for PIM, which i would like to put in before DP2 (it does not change any of the existing APIs, anyways). Note, in the process we found out that some device drivers fail to properly handle changes in IFF_ALLMULTI, leading to interesting behaviour when a multicast router is started. This bug is not corrected by this commit, and will be fixed with a separate commit. Detailed changes: -------------------- netinet/ip_mroute.c all the above. conf/files make ip_mroute.c optional net/route.c fix mrt_ioctl hook netinet/ip_input.c fix ip_mforward hook, move rsvp_input() here together with other rsvp code, and a couple of indentation fixes. netinet/ip_output.c fix ip_mforward and ip_mcast_src hooks netinet/ip_var.h rsvp function hooks netinet/raw_ip.c hooks for mrouting and rsvp functions, plus interface cleanup. netinet/ip_mroute.h remove an unused and optional field from a struct Most of the code is from Pavlin Radoslavov and the XORP project Reviewed by: sam MFC after: 1 week
2002-11-15 22:53:53 +00:00
}
/* Can still get packets with rsvp_on = 0 if there is a local member
* of the group to which the RSVP packet is addressed. But in this
* case we want to throw the packet away.
*/
Commit step 1 of the vimage project, (network stack) virtualization work done by Marko Zec (zec@). This is the first in a series of commits over the course of the next few weeks. Mark all uses of global variables to be virtualized with a V_ prefix. Use macros to map them back to their global names for now, so this is a NOP change only. We hope to have caught at least 85-90% of what is needed so we do not invalidate a lot of outstanding patches again. Obtained from: //depot/projects/vimage-commit2/... Reviewed by: brooks, des, ed, mav, julian, jamie, kris, rwatson, zec, ... (various people I forgot, different versions) md5 (with a bit of help) Sponsored by: NLnet Foundation, The FreeBSD Foundation X-MFC after: never V_Commit_Message_Reviewed_By: more people than the patch
2008-08-17 23:27:27 +00:00
if (!V_rsvp_on) {
Massive cleanup of the ip_mroute code. No functional changes, but: + the mrouting module now should behave the same as the compiled-in version (it did not before, some of the rsvp code was not loaded properly); + netinet/ip_mroute.c is now truly optional; + removed some redundant/unused code; + changed many instances of '0' to NULL and INADDR_ANY as appropriate; + removed several static variables to make the code more SMP-friendly; + fixed some minor bugs in the mrouting code (mostly, incorrect return values from functions). This commit is also a prerequisite to the addition of support for PIM, which i would like to put in before DP2 (it does not change any of the existing APIs, anyways). Note, in the process we found out that some device drivers fail to properly handle changes in IFF_ALLMULTI, leading to interesting behaviour when a multicast router is started. This bug is not corrected by this commit, and will be fixed with a separate commit. Detailed changes: -------------------- netinet/ip_mroute.c all the above. conf/files make ip_mroute.c optional net/route.c fix mrt_ioctl hook netinet/ip_input.c fix ip_mforward hook, move rsvp_input() here together with other rsvp code, and a couple of indentation fixes. netinet/ip_output.c fix ip_mforward and ip_mcast_src hooks netinet/ip_var.h rsvp function hooks netinet/raw_ip.c hooks for mrouting and rsvp functions, plus interface cleanup. netinet/ip_mroute.h remove an unused and optional field from a struct Most of the code is from Pavlin Radoslavov and the XORP project Reviewed by: sam MFC after: 1 week
2002-11-15 22:53:53 +00:00
m_freem(m);
Merge 'struct ip6protosw' and 'struct protosw' into one. Now we have only one protocol switch structure that is shared between ipv4 and ipv6. Phabric: D476 Reviewed by: jhb
2014-08-08 01:57:15 +00:00
return (IPPROTO_DONE);
Massive cleanup of the ip_mroute code. No functional changes, but: + the mrouting module now should behave the same as the compiled-in version (it did not before, some of the rsvp code was not loaded properly); + netinet/ip_mroute.c is now truly optional; + removed some redundant/unused code; + changed many instances of '0' to NULL and INADDR_ANY as appropriate; + removed several static variables to make the code more SMP-friendly; + fixed some minor bugs in the mrouting code (mostly, incorrect return values from functions). This commit is also a prerequisite to the addition of support for PIM, which i would like to put in before DP2 (it does not change any of the existing APIs, anyways). Note, in the process we found out that some device drivers fail to properly handle changes in IFF_ALLMULTI, leading to interesting behaviour when a multicast router is started. This bug is not corrected by this commit, and will be fixed with a separate commit. Detailed changes: -------------------- netinet/ip_mroute.c all the above. conf/files make ip_mroute.c optional net/route.c fix mrt_ioctl hook netinet/ip_input.c fix ip_mforward hook, move rsvp_input() here together with other rsvp code, and a couple of indentation fixes. netinet/ip_output.c fix ip_mforward and ip_mcast_src hooks netinet/ip_var.h rsvp function hooks netinet/raw_ip.c hooks for mrouting and rsvp functions, plus interface cleanup. netinet/ip_mroute.h remove an unused and optional field from a struct Most of the code is from Pavlin Radoslavov and the XORP project Reviewed by: sam MFC after: 1 week
2002-11-15 22:53:53 +00:00
}
Commit step 1 of the vimage project, (network stack) virtualization work done by Marko Zec (zec@). This is the first in a series of commits over the course of the next few weeks. Mark all uses of global variables to be virtualized with a V_ prefix. Use macros to map them back to their global names for now, so this is a NOP change only. We hope to have caught at least 85-90% of what is needed so we do not invalidate a lot of outstanding patches again. Obtained from: //depot/projects/vimage-commit2/... Reviewed by: brooks, des, ed, mav, julian, jamie, kris, rwatson, zec, ... (various people I forgot, different versions) md5 (with a bit of help) Sponsored by: NLnet Foundation, The FreeBSD Foundation X-MFC after: never V_Commit_Message_Reviewed_By: more people than the patch
2008-08-17 23:27:27 +00:00
if (V_ip_rsvpd != NULL) {
Merge 'struct ip6protosw' and 'struct protosw' into one. Now we have only one protocol switch structure that is shared between ipv4 and ipv6. Phabric: D476 Reviewed by: jhb
2014-08-08 01:57:15 +00:00
*mp = m;
rip_input(mp, offp, proto);
return (IPPROTO_DONE);
Massive cleanup of the ip_mroute code. No functional changes, but: + the mrouting module now should behave the same as the compiled-in version (it did not before, some of the rsvp code was not loaded properly); + netinet/ip_mroute.c is now truly optional; + removed some redundant/unused code; + changed many instances of '0' to NULL and INADDR_ANY as appropriate; + removed several static variables to make the code more SMP-friendly; + fixed some minor bugs in the mrouting code (mostly, incorrect return values from functions). This commit is also a prerequisite to the addition of support for PIM, which i would like to put in before DP2 (it does not change any of the existing APIs, anyways). Note, in the process we found out that some device drivers fail to properly handle changes in IFF_ALLMULTI, leading to interesting behaviour when a multicast router is started. This bug is not corrected by this commit, and will be fixed with a separate commit. Detailed changes: -------------------- netinet/ip_mroute.c all the above. conf/files make ip_mroute.c optional net/route.c fix mrt_ioctl hook netinet/ip_input.c fix ip_mforward hook, move rsvp_input() here together with other rsvp code, and a couple of indentation fixes. netinet/ip_output.c fix ip_mforward and ip_mcast_src hooks netinet/ip_var.h rsvp function hooks netinet/raw_ip.c hooks for mrouting and rsvp functions, plus interface cleanup. netinet/ip_mroute.h remove an unused and optional field from a struct Most of the code is from Pavlin Radoslavov and the XORP project Reviewed by: sam MFC after: 1 week
2002-11-15 22:53:53 +00:00
}
/* Drop the packet */
m_freem(m);
Merge 'struct ip6protosw' and 'struct protosw' into one. Now we have only one protocol switch structure that is shared between ipv4 and ipv6. Phabric: D476 Reviewed by: jhb
2014-08-08 01:57:15 +00:00
return (IPPROTO_DONE);
Massive cleanup of the ip_mroute code. No functional changes, but: + the mrouting module now should behave the same as the compiled-in version (it did not before, some of the rsvp code was not loaded properly); + netinet/ip_mroute.c is now truly optional; + removed some redundant/unused code; + changed many instances of '0' to NULL and INADDR_ANY as appropriate; + removed several static variables to make the code more SMP-friendly; + fixed some minor bugs in the mrouting code (mostly, incorrect return values from functions). This commit is also a prerequisite to the addition of support for PIM, which i would like to put in before DP2 (it does not change any of the existing APIs, anyways). Note, in the process we found out that some device drivers fail to properly handle changes in IFF_ALLMULTI, leading to interesting behaviour when a multicast router is started. This bug is not corrected by this commit, and will be fixed with a separate commit. Detailed changes: -------------------- netinet/ip_mroute.c all the above. conf/files make ip_mroute.c optional net/route.c fix mrt_ioctl hook netinet/ip_input.c fix ip_mforward hook, move rsvp_input() here together with other rsvp code, and a couple of indentation fixes. netinet/ip_output.c fix ip_mforward and ip_mcast_src hooks netinet/ip_var.h rsvp function hooks netinet/raw_ip.c hooks for mrouting and rsvp functions, plus interface cleanup. netinet/ip_mroute.h remove an unused and optional field from a struct Most of the code is from Pavlin Radoslavov and the XORP project Reviewed by: sam MFC after: 1 week
2002-11-15 22:53:53 +00:00
}
Reference in New Issue Copy Permalink