riscv/sifive: add FU540 SPI controller driver
Initial working prototype of the Serial Peripheral Interface controller in the SiFive FU540 SoC. Reviewed by: kp Sponsored by: Axiado
This commit is contained in:
parent
09728b2df6
commit
109ece57d0
Notes:
svn2git
2020-12-20 02:59:44 +00:00
svn path=/head/; revision=355921
@ -1,3 +1,4 @@
|
||||
# $FreeBSD$
|
||||
|
||||
riscv/sifive/fu540_prci.c standard
|
||||
riscv/sifive/fu540_spi.c optional fu540spi spibus
|
||||
|
403
sys/riscv/sifive/fu540_spi.c
Normal file
403
sys/riscv/sifive/fu540_spi.c
Normal file
@ -0,0 +1,403 @@
|
||||
/*-
|
||||
* SPDX-License-Identifier: BSD-2-Clause-FreeBSD
|
||||
*
|
||||
* Copyright (c) 2019 Axiado Corporation
|
||||
* All rights reserved.
|
||||
*
|
||||
* This software was developed in part by Philip Paeps and Kristof Provost
|
||||
* under contract for Axiado Corporation.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in the
|
||||
* documentation and/or other materials provided with the distribution.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
|
||||
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
||||
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
||||
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
|
||||
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
||||
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
|
||||
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
||||
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
|
||||
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
|
||||
* SUCH DAMAGE.
|
||||
*/
|
||||
|
||||
#include <sys/cdefs.h>
|
||||
__FBSDID("$FreeBSD$");
|
||||
|
||||
#include <sys/param.h>
|
||||
#include <sys/systm.h>
|
||||
#include <sys/bus.h>
|
||||
#include <sys/kernel.h>
|
||||
#include <sys/lock.h>
|
||||
#include <sys/module.h>
|
||||
#include <sys/mutex.h>
|
||||
#include <sys/rman.h>
|
||||
|
||||
#include <machine/bus.h>
|
||||
#include <machine/cpu.h>
|
||||
|
||||
#include <dev/extres/clk/clk.h>
|
||||
|
||||
#include <dev/ofw/ofw_bus.h>
|
||||
#include <dev/ofw/ofw_bus_subr.h>
|
||||
#include <dev/ofw/openfirm.h>
|
||||
|
||||
#include <dev/spibus/spi.h>
|
||||
#include <dev/spibus/spibusvar.h>
|
||||
|
||||
#include "spibus_if.h"
|
||||
|
||||
#if 1
|
||||
#define DBGPRINT(dev, fmt, args...) \
|
||||
device_printf(dev, "%s: " fmt "\n", __func__, ## args)
|
||||
#else
|
||||
#define DBGPRINT(dev, fmt, args...)
|
||||
#endif
|
||||
|
||||
static struct resource_spec fuspi_spec[] = {
|
||||
{ SYS_RES_MEMORY, 0, RF_ACTIVE },
|
||||
RESOURCE_SPEC_END
|
||||
};
|
||||
|
||||
struct fuspi_softc {
|
||||
device_t dev;
|
||||
device_t parent;
|
||||
|
||||
struct mtx mtx;
|
||||
|
||||
struct resource *res;
|
||||
bus_space_tag_t bst;
|
||||
bus_space_handle_t bsh;
|
||||
|
||||
void *ih;
|
||||
|
||||
clk_t clk;
|
||||
uint32_t cs_max;
|
||||
};
|
||||
|
||||
#define FUSPI_LOCK(sc) mtx_lock(&(sc)->mtx)
|
||||
#define FUSPI_UNLOCK(sc) mtx_unlock(&(sc)->mtx)
|
||||
#define FUSPI_ASSERT_LOCKED(sc) mtx_assert(&(sc)->mtx, MA_OWNED);
|
||||
#define FUSPI_ASSERT_UNLOCKED(sc) mtx_assert(&(sc)->mtx, MA_NOTOWNED);
|
||||
|
||||
/*
|
||||
* Register offsets.
|
||||
* From Sifive-Unleashed-FU540-C000-v1.0.pdf page 101.
|
||||
*/
|
||||
#define FUSPI_REG_SCKDIV 0x00 /* Serial clock divisor */
|
||||
#define FUSPI_REG_SCKMODE 0x04 /* Serial clock mode */
|
||||
#define FUSPI_REG_CSID 0x10 /* Chip select ID */
|
||||
#define FUSPI_REG_CSDEF 0x14 /* Chip select default */
|
||||
#define FUSPI_REG_CSMODE 0x18 /* Chip select mode */
|
||||
#define FUSPI_REG_DELAY0 0x28 /* Delay control 0 */
|
||||
#define FUSPI_REG_DELAY1 0x2C /* Delay control 1 */
|
||||
#define FUSPI_REG_FMT 0x40 /* Frame format */
|
||||
#define FUSPI_REG_TXDATA 0x48 /* Tx FIFO data */
|
||||
#define FUSPI_REG_RXDATA 0x4C /* Rx FIFO data */
|
||||
#define FUSPI_REG_TXMARK 0x50 /* Tx FIFO watermark */
|
||||
#define FUSPI_REG_RXMARK 0x54 /* Rx FIFO watermark */
|
||||
#define FUSPI_REG_FCTRL 0x60 /* SPI flash interface control* */
|
||||
#define FUSPI_REG_FFMT 0x64 /* SPI flash instruction format* */
|
||||
#define FUSPI_REG_IE 0x70 /* SPI interrupt enable */
|
||||
#define FUSPI_REG_IP 0x74 /* SPI interrupt pending */
|
||||
|
||||
#define FUSPI_SCKDIV_MASK 0xfff
|
||||
|
||||
#define FUSPI_CSDEF_ALL ((1 << sc->cs_max)-1)
|
||||
|
||||
#define FUSPI_CSMODE_AUTO 0x0U
|
||||
#define FUSPI_CSMODE_HOLD 0x2U
|
||||
#define FUSPI_CSMODE_OFF 0x3U
|
||||
|
||||
#define FUSPI_TXDATA_DATA_MASK 0xff
|
||||
#define FUSPI_TXDATA_FULL (1 << 31)
|
||||
|
||||
#define FUSPI_RXDATA_DATA_MASK 0xff
|
||||
#define FUSPI_RXDATA_EMPTY (1 << 31)
|
||||
|
||||
#define FUSPI_SCKMODE_PHA (1 << 0)
|
||||
#define FUSPI_SCKMODE_POL (1 << 1)
|
||||
|
||||
#define FUSPI_FMT_PROTO_SINGLE 0x0U
|
||||
#define FUSPI_FMT_PROTO_DUAL 0x1U
|
||||
#define FUSPI_FMT_PROTO_QUAD 0x2U
|
||||
#define FUSPI_FMT_PROTO_MASK 0x3U
|
||||
#define FUSPI_FMT_ENDIAN (1 << 2)
|
||||
#define FUSPI_FMT_DIR (1 << 3)
|
||||
#define FUSPI_FMT_LEN(x) ((uint32_t)(x) << 16)
|
||||
#define FUSPI_FMT_LEN_MASK (0xfU << 16)
|
||||
|
||||
#define FUSPI_FIFO_DEPTH 8
|
||||
|
||||
#define FUSPI_READ(_sc, _reg) \
|
||||
bus_space_read_4((_sc)->bst, (_sc)->bsh, (_reg))
|
||||
#define FUSPI_WRITE(_sc, _reg, _val) \
|
||||
bus_space_write_4((_sc)->bst, (_sc)->bsh, (_reg), (_val))
|
||||
|
||||
static void
|
||||
fuspi_tx(struct fuspi_softc *sc, uint8_t *buf, uint32_t bufsiz)
|
||||
{
|
||||
uint32_t val;
|
||||
uint8_t *p, *end;
|
||||
|
||||
KASSERT(buf != NULL, ("TX buffer cannot be NULL"));
|
||||
|
||||
end = buf + bufsiz;
|
||||
for (p = buf; p < end; p++) {
|
||||
do {
|
||||
val = FUSPI_READ(sc, FUSPI_REG_TXDATA);
|
||||
} while (val & FUSPI_TXDATA_FULL);
|
||||
val = *p;
|
||||
FUSPI_WRITE(sc, FUSPI_REG_TXDATA, val);
|
||||
}
|
||||
}
|
||||
|
||||
static void
|
||||
fuspi_rx(struct fuspi_softc *sc, uint8_t *buf, uint32_t bufsiz)
|
||||
{
|
||||
uint32_t val;
|
||||
uint8_t *p, *end;
|
||||
|
||||
KASSERT(buf != NULL, ("RX buffer cannot be NULL"));
|
||||
KASSERT(bufsiz <= FUSPI_FIFO_DEPTH,
|
||||
("Cannot receive more than %d bytes at a time\n",
|
||||
FUSPI_FIFO_DEPTH));
|
||||
|
||||
end = buf + bufsiz;
|
||||
for (p = buf; p < end; p++) {
|
||||
do {
|
||||
val = FUSPI_READ(sc, FUSPI_REG_RXDATA);
|
||||
} while (val & FUSPI_RXDATA_EMPTY);
|
||||
*p = val & FUSPI_RXDATA_DATA_MASK;
|
||||
};
|
||||
}
|
||||
|
||||
static int
|
||||
fuspi_xfer_buf(struct fuspi_softc *sc, uint8_t *rxbuf, uint8_t *txbuf,
|
||||
uint32_t txlen, uint32_t rxlen)
|
||||
{
|
||||
uint32_t bytes;
|
||||
|
||||
KASSERT(txlen == rxlen, ("TX and RX lengths must be equal"));
|
||||
KASSERT(rxbuf != NULL, ("RX buffer cannot be NULL"));
|
||||
KASSERT(txbuf != NULL, ("TX buffer cannot be NULL"));
|
||||
|
||||
while (txlen) {
|
||||
bytes = (txlen > FUSPI_FIFO_DEPTH) ? FUSPI_FIFO_DEPTH : txlen;
|
||||
fuspi_tx(sc, txbuf, bytes);
|
||||
txbuf += bytes;
|
||||
fuspi_rx(sc, rxbuf, bytes);
|
||||
rxbuf += bytes;
|
||||
txlen -= bytes;
|
||||
}
|
||||
|
||||
return (0);
|
||||
}
|
||||
|
||||
static int
|
||||
fuspi_setup(struct fuspi_softc *sc, uint32_t cs, uint32_t mode,
|
||||
uint32_t freq)
|
||||
{
|
||||
uint32_t csmode, fmt, sckdiv, sckmode;
|
||||
uint64_t clock;
|
||||
int ret;
|
||||
|
||||
FUSPI_ASSERT_LOCKED(sc);
|
||||
|
||||
ret = clk_get_freq(sc->clk, &clock);
|
||||
if (ret) {
|
||||
device_printf(sc->dev, "Cannot get clock frequency: %d\n", ret);
|
||||
return (ret);
|
||||
}
|
||||
|
||||
/*
|
||||
* Fsck = Fin / 2 * (div + 1)
|
||||
* -> div = Fin / (2 * Fsck) - 1
|
||||
*/
|
||||
sckdiv = (howmany(clock >> 1, freq) - 1) & FUSPI_SCKDIV_MASK;
|
||||
FUSPI_WRITE(sc, FUSPI_REG_SCKDIV, sckdiv);
|
||||
|
||||
switch (mode) {
|
||||
case SPIBUS_MODE_CPHA:
|
||||
sckmode = FUSPI_SCKMODE_PHA;
|
||||
break;
|
||||
case SPIBUS_MODE_CPOL:
|
||||
sckmode = FUSPI_SCKMODE_POL;
|
||||
break;
|
||||
case SPIBUS_MODE_CPOL_CPHA:
|
||||
sckmode = FUSPI_SCKMODE_PHA | FUSPI_SCKMODE_POL;
|
||||
break;
|
||||
}
|
||||
FUSPI_WRITE(sc, FUSPI_REG_SCKMODE, sckmode);
|
||||
|
||||
csmode = FUSPI_CSMODE_HOLD;
|
||||
if (cs & SPIBUS_CS_HIGH)
|
||||
csmode = FUSPI_CSMODE_AUTO;
|
||||
FUSPI_WRITE(sc, FUSPI_REG_CSMODE, csmode);
|
||||
|
||||
FUSPI_WRITE(sc, FUSPI_REG_CSID, cs & ~SPIBUS_CS_HIGH);
|
||||
|
||||
fmt = FUSPI_FMT_PROTO_SINGLE | FUSPI_FMT_LEN(8);
|
||||
FUSPI_WRITE(sc, FUSPI_REG_FMT, fmt);
|
||||
|
||||
return (0);
|
||||
}
|
||||
|
||||
static int
|
||||
fuspi_transfer(device_t dev, device_t child, struct spi_command *cmd)
|
||||
{
|
||||
struct fuspi_softc *sc;
|
||||
uint32_t clock, cs, csdef, mode;
|
||||
int err;
|
||||
|
||||
KASSERT(cmd->tx_cmd_sz == cmd->rx_cmd_sz,
|
||||
("TX and RX command sizes must be equal"));
|
||||
KASSERT(cmd->tx_data_sz == cmd->rx_data_sz,
|
||||
("TX and RX data sizes must be equal"));
|
||||
|
||||
sc = device_get_softc(dev);
|
||||
spibus_get_cs(child, &cs);
|
||||
spibus_get_clock(child, &clock);
|
||||
spibus_get_mode(child, &mode);
|
||||
|
||||
if (cs > sc->cs_max) {
|
||||
device_printf(sc->dev, "Invalid chip select %u\n", cs);
|
||||
return (EINVAL);
|
||||
}
|
||||
|
||||
FUSPI_LOCK(sc);
|
||||
device_busy(sc->dev);
|
||||
|
||||
err = fuspi_setup(sc, cs, mode, clock);
|
||||
if (err != 0) {
|
||||
FUSPI_UNLOCK(sc);
|
||||
return (err);
|
||||
}
|
||||
|
||||
err = 0;
|
||||
if (cmd->tx_cmd_sz > 0)
|
||||
err = fuspi_xfer_buf(sc, cmd->rx_cmd, cmd->tx_cmd,
|
||||
cmd->tx_cmd_sz, cmd->rx_cmd_sz);
|
||||
if (cmd->tx_data_sz > 0 && err == 0)
|
||||
err = fuspi_xfer_buf(sc, cmd->rx_data, cmd->tx_data,
|
||||
cmd->tx_data_sz, cmd->rx_data_sz);
|
||||
|
||||
/* Deassert chip select. */
|
||||
csdef = FUSPI_CSDEF_ALL & ~(1 << cs);
|
||||
FUSPI_WRITE(sc, FUSPI_REG_CSDEF, csdef);
|
||||
FUSPI_WRITE(sc, FUSPI_REG_CSDEF, FUSPI_CSDEF_ALL);
|
||||
|
||||
device_unbusy(sc->dev);
|
||||
FUSPI_UNLOCK(sc);
|
||||
|
||||
return (err);
|
||||
}
|
||||
|
||||
static int
|
||||
fuspi_attach(device_t dev)
|
||||
{
|
||||
struct fuspi_softc *sc;
|
||||
int error;
|
||||
|
||||
sc = device_get_softc(dev);
|
||||
sc->dev = dev;
|
||||
|
||||
mtx_init(&sc->mtx, device_get_nameunit(sc->dev), NULL, MTX_DEF);
|
||||
|
||||
error = bus_alloc_resources(dev, fuspi_spec, &sc->res);
|
||||
if (error) {
|
||||
device_printf(dev, "Couldn't allocate resources\n");
|
||||
goto fail;
|
||||
}
|
||||
sc->bst = rman_get_bustag(sc->res);
|
||||
sc->bsh = rman_get_bushandle(sc->res);
|
||||
|
||||
error = clk_get_by_ofw_index(dev, 0, 0, &sc->clk);
|
||||
if (error) {
|
||||
device_printf(dev, "Couldn't allocate clock: %d\n", error);
|
||||
goto fail;
|
||||
}
|
||||
error = clk_enable(sc->clk);
|
||||
if (error) {
|
||||
device_printf(dev, "Couldn't enable clock: %d\n", error);
|
||||
goto fail;
|
||||
}
|
||||
|
||||
/*
|
||||
* From Sifive-Unleashed-FU540-C000-v1.0.pdf page 103:
|
||||
* csdef is cs_width bits wide and all ones on reset.
|
||||
*/
|
||||
sc->cs_max = FUSPI_READ(sc, FUSPI_REG_CSDEF);
|
||||
|
||||
/*
|
||||
* We don't support the direct-mapped flash interface.
|
||||
* Disable it.
|
||||
*/
|
||||
FUSPI_WRITE(sc, FUSPI_REG_FCTRL, 0x0);
|
||||
|
||||
/* Probe and attach the spibus when interrupts are available. */
|
||||
sc->parent = device_add_child(dev, "spibus", -1);
|
||||
config_intrhook_oneshot((ich_func_t)bus_generic_attach, dev);
|
||||
|
||||
return (0);
|
||||
|
||||
fail1:
|
||||
bus_release_resources(dev, fuspi_spec, &sc->res);
|
||||
|
||||
fail:
|
||||
mtx_destroy(&sc->mtx);
|
||||
return (error);
|
||||
}
|
||||
|
||||
static int
|
||||
fuspi_probe(device_t dev)
|
||||
{
|
||||
|
||||
if (!ofw_bus_status_okay(dev))
|
||||
return (ENXIO);
|
||||
|
||||
if (!ofw_bus_is_compatible(dev, "sifive,spi0"))
|
||||
return (ENXIO);
|
||||
|
||||
device_set_desc(dev, "SiFive FU540 SPI controller");
|
||||
|
||||
return (BUS_PROBE_DEFAULT);
|
||||
}
|
||||
|
||||
static phandle_t
|
||||
fuspi_get_node(device_t bus, device_t dev)
|
||||
{
|
||||
|
||||
return (ofw_bus_get_node(bus));
|
||||
}
|
||||
|
||||
static device_method_t fuspi_methods[] = {
|
||||
DEVMETHOD(device_probe, fuspi_probe),
|
||||
DEVMETHOD(device_attach, fuspi_attach),
|
||||
|
||||
DEVMETHOD(spibus_transfer, fuspi_transfer),
|
||||
|
||||
DEVMETHOD(ofw_bus_get_node, fuspi_get_node),
|
||||
|
||||
DEVMETHOD_END
|
||||
};
|
||||
|
||||
static driver_t fuspi_driver = {
|
||||
"fu540spi",
|
||||
fuspi_methods,
|
||||
sizeof(struct fuspi_softc)
|
||||
};
|
||||
|
||||
static devclass_t fuspi_devclass;
|
||||
|
||||
DRIVER_MODULE(fu540spi, simplebus, fuspi_driver, fuspi_devclass, 0, 0);
|
||||
DRIVER_MODULE(ofw_spibus, fu540spi, ofw_spibus_driver, ofw_spibus_devclass, 0, 0);
|
||||
MODULE_DEPEND(fu540spi, ofw_spibus, 1, 1, 1);
|
Loading…
Reference in New Issue
Block a user