This function permits a range of one scatter/gather list to be appended to
another sglist. This can be used to construct a scatter/gather list that
reorders or duplicates ranges from one or more existing scatter/gather
lists.
Sponsored by: Chelsio Communications
Invoke any identify routines of child drivers during attach before attaching
children, and delete any remaining devices after deleting ports.
MFC after: 1 month
Sponsored by: Chelsio Communications
2. Use sysctls for TRACE_LRO_CNT and TRACE_TSO_PKT_LEN
3. remove unused mtx tx_lock
4. bind taskqueue kernel thread to the appropriate cpu core
5. when tx_ring is full, stop further transmits till at least 1/16th of the Tx Ring is empty. In our case 1K entries. Also if there are rx_pkts to process, put the taskqueue thread to sleep for 100ms, before enabling interrupts.
6. Use rx_pkt_threshold of 128.
MFC after:3 days
For p_endcopy to work correctly, it must be the name of the next element
in struct proc after the end of the copy region, not the name of the
last element in the copy region. Currently, the last element
(p_elf_flags) is not being copied. In addition, the p_xexit and
p_xsig fields should not be copied on fork, so move them out of the
copy region.
Reviewed by: kib
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D10677
With ip fragment reassembly implemented, it makes sense to allow
larger nfs reads. Note due to loader heap size limit, we do not want
to set too large maximum read size. Also we do not change default read size.
Reviewed by: bcr, allanjude
Differential Revision: https://reviews.freebsd.org/D10754
This was introduced in r290156. It's present in 11.0, but not any 10.x
release unless someone decided to MFC it.
It affects ordinary pages right above the DMAP limit, which is effectively
system memory rounded up to a 1 GB (3rd level superpage) boundary (or up to
a minimum of 4 GB, on small systems).
Reported by: vangyzen
Reviewed by: kib, alc
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D4030
This patch improves the boundary checks in busdma to allow more cases
using the regular page based kernel memory allocator. Especially in
the case of having a non-zero boundary in the parent DMA tag. For
example AMD64 based platforms set the PCI DMA tag boundary to
PCI_DMA_BOUNDARY, 4GB, which before this patch caused contiguous
memory allocations to be preferred when allocating more than PAGE_SIZE
bytes. Even if the required alignment was less than PAGE_SIZE bytes.
This patch also fixes the nsegments check for using kmem_alloc_attr()
when the maximum segment size is less than PAGE_SIZE bytes.
Updated some comments describing the code in question.
Differential Revision: https://reviews.freebsd.org/D10645
Reviewed by: kib, jhb, gallatin, scottl
MFC after: 1 week
Sponsored by: Mellanox Technologies
sdhci_fdt.
Enable the SDHCI controller, bus and devices on ARMADA38X kernel.
Tested on: ClearFog Pro
Reviewed by: Marcin Wojtas <mw at semihalf.com>
Sponsored by: Rubicon Communications, LLC (Netgate)
Differential Revision: https://reviews.freebsd.org/D10606
Tested on: ClearFog Pro
Reviewed by: Marcin Wojtas <mw at semihalf.com>
Sponsored by: Rubicon Communications, LLC (Netgate)
Differential Revision: https://reviews.freebsd.org/D10601
function (they used to say UMA_ZONE_NOFREE), so flag parameter goes away.
The zone_fini parameter also goes away. Previously no protocols (except
divert) supplied zone_fini function, so inpcb locks were leaked with slabs.
This was okay while zones were allocated with UMA_ZONE_NOFREE flag, but now
this is a leak. Fix that by suppling inpcb_fini() function as fini method
for all inpcb zones.
The idle thread may process callouts while reloading the timer in
cpu_activeclock(). In this case, provide a representative value, &cpu_idle,
instead of 0 for args[0] so that the active thread can be more easily
identified from the probe.
This addresses intermittent failures of the profile-n/tst.argtest.d test.
MFC after: 2 weeks
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D10651
operation after processor is configured to allow all required
features.
In particular, NX must be enabled in EFER, otherwise load of page
table element with nx bit set causes reserved bit page fault. Since
malloc uses direct mapping for small allocations, in particular for
the suspension pcbs, and DMAP is nx after r316767, this commit tripped
fault on resume path.
Restore complete state of EFER while wakeup code is still executing
with custom page table, before calling resumectx, instead of trying to
guess which features might be needed before resumectx restored EFER on
its own.
Bisected and tested by: trasz
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
Two blocks in e1000_ich8lan.c are misaligned, causing noise with some
compilers (gcc 6).
Reviewed by: imp, erj
Differential Revision: https://reviews.freebsd.org/D10741
Previously, when the VI_TRYLOCK failed, we would spin under the mutex
that protects the vnode active list until we either succeeded or
noticed that we had hogged the CPU. Since we were violating the lock
order, this would guarantee that we would become a hog under any
deadlock condition (e.g. a race with vdrop(9) on the same vnode). In
the presence of many concurrent threads in sync(2) or vdrop etc, the
victim could hang for a long time.
Now, avoid spinning by dropping and reacquiring the locks in the
conventional lock order when the trylock fails. This requires a dance
with the vnode hold count.
Submitted by: Tom Rix <trix@juniper.net>
Tested by: pho
Differential revision: https://reviews.freebsd.org/D10692
and Braswell eMMC and SDXC controllers share the same IDs. Like in
the PCI case, Braswell eMMC needs the SDHCI_QUIRK_DATA_TIMEOUT_1MHZ
quirk (see r311794 for the corresponding change to the sdhci(4) PCI
PCI front-end), though. However, due to the shared ACPI IDs, this
is trickier to do.
- Intel Apollo Lake eMMC and SDXC controllers are affected by the
APL18 ("Using 32-bit Addressing Mode With SD/eMMC Controller May
Lead to Unpredictable System Behavior") silicon bug [1]. When this
erratum hits, typically both SDHCI and XHCI controllers wedge.
According to Intel, using ADMA2 with 64-bit addressing and 96-bit
descriptors serves as a workaround. Until such times when sdhci(4)
has ADMA2 support, flag DMA as broken for affected interfaces.
This turns out to work around the problem, too, at the cost of
performance.
- In the sdhci(4) ACPI front-end, probe the Intel Apollo Lake eMMC
and SDXC controllers, too.
1: http://www.intel.com/content/dam/www/public/us/en/documents/specification-updates/pentium-celeron-n-series-j-series-datasheet-spec-update.pdf
compiled into the kernel
This ensures that .iss_asm (the number of ASM listeners) isn't incorrectly
decremented for MLD-layer source datagrams when inspecting im*s_st[1]
(the second state in the structure).
MFC after: 2 months
PR: 217509 [1]
Reported by: Coverity (Isilon)
Reviewed by: ae ("This patch looks correct to me." [1])
Submitted by: Miles Ohlrich <miles.ohlrich@isilon.com>
Sponsored by: Dell EMC Isilon
VM_MEMATTR_WRITE_COMBINING in the kernel. This fixes a bug where Xorg would
use write back cached memory for its graphics buffers. This would produce
artifacts on the screen as cachelines were written to memory.
MFC after: 1 week
Sponsored by: DARPA, AFRL
is blocked. The spurious wakeup might result in spurious EINTR.
The reschedule_signals() function is called when the calling thread
has the signal mask changed. For each newly blocked signal, we try to
find a thread which might have the signal not blocked. If no such
thread exists, sigtd() returns random thread, which must not be waken
up. I decided that re-checking, as suggested by PR submitter, is more
reasonable change than to change sigtd() interface, due to other uses
of sigtd(). signotify() already performs this check.
Submitted by: Duane <parakleta@darkreality.org>
PR: 219228
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
* This fixes cases where the group id of wide commands got lost, e.g. this
happened to the IWM_SCAN_ABORT_UMAC command.
Obtained from: dragonflybsd.git 71310fab0caca79bb5da43d9d642e77a4c27eea2
* Since a RUN -> INIT/SCAN transition seems to immediately destroy the
ieee80211_node for the AP, we can't read the in_assoc value from there.
Instead just directly pass that information via a boolean_t argument.
* Adds iwm_mvm_rm_sta_id() function, which just unconditionally removes
the station from the firmware.
* The iwm_mvm_rm_sta() function shouldn't actually remove the station from
firmware when we are still associated (i.e. during a RUN -> INIT/SCAN
transition).
* So when disassociating we will first call iwm_mvm_rm_sta() to drain the
queues/fifos. Later during disassociation we will then use
iwm_mvm_rm_sta_id() to actually remove the station.
Inspired-By: Linux iwlwifi
Obtained from: dragonflybsd.git 81b3c1fe9122fa22f33d97103039cc375f656231
* Add a per-vap ps_disabled flag, and use it for a workaround which fixes
an association issue when powersaving is enabled.
* Compute flag that should correpsond to the mvmif->bss_conf.ps flag in
Linux's iwlwifi (e.g. this disallows powersaving when not associated
yet).
Inspired-By: Linux iwlwifi
Obtained from: dragonflybsd.git dc2e69bdfe8c9d7049c8a28da0adffbfbc6de5c0
* Power management handling is per-vap, not per-node, so we should pass
the iwm_vap in these arguments.
Obtained from: dragonflybsd.git 62a4e7957a736b4de38938b02fa7eb9b45bc5d0d
* Otherwise we would never update powersaving settings until we complete
an association, after the first authentication attempt.
* This corresponds to what Linux iwlwifi seems to do.
Obtained from: dragonflybsd.git aa128dc02a17c2e616232ef0fa997121e969c995
* Tear down the relevant firmware state (i.e. the station, the vif binding)
in these transition cases.
* Before this case would leave the firmware state lying around, resulting
in errors and firmware panics in the subsequent association attempts.
Obtained from: dragonflybsd.git 94b501399fde6368ae388a669c95b099a6e66e93
* This adds iwm_mvm_rm_sta(), which will be used to tear down firmware
state for better/cleaner iwm_newstate() handling.
* Makes iwm_enable_txq() and iwm_mvm_flush_tx_path() non-static, add
the declarations to if_iwm_util.h for now.
Obtained from: dragonflybsd.git 85d1c6190c4c3564b1a347f253e823aa95c202b2
* Hence no need to keep stuff in separate iwm_assoc() function, just
inline the stuff into iwm_newstate().
Obtained from: dragonflybsd.git e8f7d88e0d030f138f95ecdb7c1a729d9fb0d6ab
* Inspired by iwn(4) and Linux iwlwifi.
* Read wme parameters into a buffer within struct iwm_vap in
iwm_wme_update().
* If we aren't associated yet, the new settings will soon be sent
by iwm_mvm_mac_ctxt_changed() during association.
* If we are already associated, explicitly call iwm_mvm_mac_ctxt_changed()
from iwm_wme_update() to send the new settings to the firmware.
* Change iwm_mvm_ac_to_tx_fifo mapping, to fit the freebsd net80211
WME stream class numbering, instead of Linux's enum ieee80211_ac_numbers.
Obtained from: dragonflybsd.git b8bd6cd746d1f45e616ccfcbeed06dfe452a1108
* Factor out iwm_handle_rxb() function from iwm_notif_intr().
* Removing the IWM_FH_RCSR_CHNL0_RX_CONFIG_SINGLE_FRAME_MSK flag allows
the device to put multiple frames (both command responses and 80211
frames) into a single RX buffer.
* Uses m_copym() to split up the receive buffers when multiple 80211
frames are received in one RX buffer. The effect is basically the same
as when using m_split(), but we want to keep the original mbuf around
when calling iwm_mvm_rx_rx_mpdu() to make error handling a bit easier
for now.
* Contains a small optimization to avoid the m_copym() when only a single
80211 frame is received in one RX buffer (i.e. matching the existing
behaviour).
Obtained from: dragonflybsd.git b5eb43f0280bbcfd26af51cf5a4b8e8ff3590b67
* Fixes oversight from commit 757eecf0e6c92745aa2eee95811e573c8300850e.
fw_has_api now uses the isset macro instead of a simple logical-and.
Obtained from: dragonflybsd.git c00575de8491dc402abf52c8c7e1cca1ef79e257
* Store macid and color values in struct iwm_vap, to avoid hardcoded
constants a bit.
* Add iwm_mvm_binding_remove_vif() function (will be used in disconnecting
from an access point without resetting the whole device).
* Not adding code from Linux iwlwifi yet, to handle one PHY context to
be bound to several VAPs/virtual-interfaces, it's definitely not needed
in the near future.
Obtained from: dragonflybsd.git f16ef74977e51e1bfc7a625dd18b98b02158e0e5
