incomplete as some info doesn't really belong to the structs where it is
defined.
Submitted by: Pedro F. Giffuni <giffunip tutopia com>
Reviewed by: bde
MFC after: 2 weeks
- fix sign-compare issues.
- ANSIfy a couple of functions.
- Remove more duplicate #includes.
- Memory leak found by Coverity on NetBSD.
Submitted by: Pedro F. Giffuni <giffunip tutopia com>
Reviewed by: bde
MFC after: 2 weeks
- C99 initializers.
- Change the default volume label from "NO NAME" to "NO_NAME".
- Set OEM String to "BSD4.4 " following the unnamed spacing convention
in that other OS that suggests "MSWIN4.1"
Also, David Naylor's changes for Clang, mostly changing the signess
of constants.
Submitted by: Pedro F. Giffuni <giffunip tutopia com>
Clang fixes by: David Naylor <naylor.b.david gmail com>
Reviewed by: bde (with some disagreement about Clang issues)
MFC after: 2 weeks
cylinder groups that are created. When the filesystem is first created,
newfs always initialises the first two blocks of inodes, and then in the
UFS1 case will also initialise the remaining inode blocks. The changes in
growfs.c 1.23 broke the initialisation of all inodes, seemingly based on
this implementation detail in newfs(8). The result was that instead of
initialising all inodes, we would actually end up initialising all but the
first two blocks of inodes. If the filesystem was grown into empty
(all-zeros) space then the resulting filesystem was fine, however when
grown onto non-zeroed space the filesystem produced would appear to have
massive corruption on the first fsck after growing.
A test case for this problem can be found in the PR audit trail.
Fix this by once again initialising all inodes in the UFS1 case.
PR: bin/115174
Submitted by: Nate Eldredgei nge cs.hmc.edu
Reviewed by: mjacob
MFC after: 1 month
inodes by cutting back on the number of inodes per cylinder group if
necessary to stay under the limit. For a default (16K block) file
system, this limit begins to take effect for file systems above 32Tb.
This fix is in addition to -r203763 which corrected a problem in the
kernel that treated large inode numbers as negative rather than unsigned.
For a default (16K block) file system, this bug began to show up at a
file system size above about 16Tb.
Reported by: Scott Burns, John Kilburg, Bruce Evans
Followup by: Jeff Roberson
PR: 133980
MFC after: 2 weeks
Since the existing implementation searches ':' backward, a path which
includes ':' could not be mounted. You can now mount such path by
enclosing an IP address by '[]'.
Though we should change to search ':' forward, it will break
'ipv6addr:path' which is currently working. So, it still searches ':'
backward, at least for now.
MFC after: 2 weeks
retrieving individual OIDs. This allows the same list of OIDs to be
passed to sysctl(8) across different systems where particular OIDs may not
exist, and still get as much information as possible from them.
PR: bin/123644
Submitted by: dhw
Approved by: ed (mentor)
MFC after: 2 weeks
In 99% of the cases people just want to recreate device nodes they
removed from /dev. There is no reason to pass the additional "c 0 0"
anymore.
Also slightly improve the manpage. Remove references to non-existent
device names and platforms.
handled when reading from pipes.
- Remove dead code related to the -P option from getvol(). pipein and
pipecmdin are never set at the same time.
PR: bin/121502
Approved by: trasz (mentor)
MFC after: 2 weeks
in format strings.
- Use (void) instead of (void *) when discarding strcat(3) return value.
- Format string fixes to match variable types.
- Change canon() len parameter and getcmd() size parameter type from
int to size_t.
- Style Makefile and increase WARNS to 2.
PR: bin/140061
Submitted by: uqs
Approved by: trasz (mentor)
- Constify geom_config_get() name argument.
- Add void keyword for usage().
- Initialize mdunit to NULL.
- Don't call md_prthumanval() at all if length is NULL.
Approved by: trasz (mentor)
Note that due to e.g. write throttling ('wdrain'), it can stall all the disk
I/O instead of just the device it's configured for. Using it for removable
media is therefore not a good idea.
Reviewed by: pjd (earlier version)
non-digit character.
Due to an issue with rc(8) in a test configuration, ifconfig was being
invoked with the address used again as the width - for example,
ifconfig vlan0 10.0.0.1/10.0.0.1
Prior to this change, that address/width would be interpreted as
10.0.0.1/10.
According to a comment, we cannot safely remove utmpx entries here
anymore. This is because the libc routines may block on file locking. In
an ideal world login(1) should just remove the entries, which is why I'm
disabling this code for now. If it turns out we get lots of stale
entries here, we should figure out a way to deal with that.
in background mode to correct expected inconsistencies that arise
during directory rename (see immediately previous update to this
file for details). If run on a kernel without the new functionality,
background fsck will simply ignore these inconsistencies rather
than fail.
Reported by: jeff
states. First its new name will be created causing it to have two
names (from possibly different parents). Next, if it has different
parents, its value of ".." will be changed from pointing to the old
parent to pointing to the new parent. Concurrently, its old name
will be removed bringing it back into a consistent state. When fsck
encounters an extra name for a directory, it offers to remove the
"extraneous hard link"; when it finds that the names have been
changed but the update to ".." has not happened, it offers to rewrite
".." to point at the correct parent. Both of these changes were
considered unexpected so would cause fsck in preen mode or fsck in
background mode to fail with the need to run fsck manually to fix
these problems.
This update changes these errors to be expected so that in preen
mode fsck will simply fix these transitional errors. For now,
background fsck will note these errors, but will need additional
kernel support to fix them, so will simply ignore them rather than
fail. A future update will allow background fsck to fix these
problems.
Reported by: jeff
cylinder group of a UFS1 filesystem as bad. The error was in the check
and not in the cylinder group itself. So even though fsck fixed the
cylinder group correctly, it was still endlessly reported as bad.
PR: 141992
MFC after: 2 weeks
Reported by: Dan Strick
when trees were big and FAST mode was enabled by default.
So small block size doesn't benefits linear I/O operations in FAST and
significantly slowdowns in ECONOMIC (default) mode. For single stream random
I/Os so small block doesn't give much benefits, as access time is usually
bigger then transfer time there. Same time it requires all heads to seek
together for every single request, reducing performance on parallel load.
(sblock.fs_magic == FS_UFS1_MAGIC) case, so the check within the
loop is redundant.
Submitted by: Nate Eldredge nge cs.hmc.edu
Reviewed by: mjacob
Approved by: ed (mentor)
MFC after: 1 month
I was considering committing all these patches one by one, but as
discussed with brooks@, there is no need to do this. If we ever
need/want to merge these changes back, it is still possible to do this
per application.
Fix some wrong usages.
Note: this does not affect generated binaries as this argument is not used.
PR: 137213
Submitted by: Eygene Ryabinkin (initial version)
MFC after: 1 month
regulatory domain with the "country" parameter, but will also take a full
country name. The man page warns that only the ISO code is unambiguous.
In reality, however, the first match on either would be accepted, leading
to "DE" being interpreted as the "DEBUG" country rather than Germany, and
"MO" selecting Morocco rather than the correct country, Macau.
Fix this by always checking for an ISO CC match first, and only search on
the full country name if that fails.
PR: bin/140571
Tested by: Dirk Meyer dirk.meyer dinoex.sub.org
Reviewed by: sam
Approved by: ed (mentor)
MFC after: 1 month
lookup {dst-ip|src-ip|dst-port|src-port|uid|jail} N
which searches the specified field in table N and sets tablearg
accordingly.
With dst-ip or src-ip the option replicates two existing options.
When used with other arguments, the option can be useful to
quickly dispatch traffic based on other fields.
Work supported by the Onelab project.
MFC after: 1 week
"split" is very ineffective for devices with rotating media as HDDs.
To be effective, it needs that transfer time reduction due to block
splitting was bigger then access time increase due to non-sequential
access. For modern HDDs I was able to reproduce it only with read sizes
of 2MB and above, which is almost not applicable in real life.
"load" algorithm same time is more universal and effective now.
Reviewed by: pjd
it seems that now it is necessary for 'forward' to work outside lo0.
The bug (and fix) was reported on 8.0. This patch probably applies
to RELENG_7 as well.
It seems that 'pf' has a similar bug.
Submitted by: Lytochkin Boris
MFC after: 3 days
Introduce ATA_CAM kernel option, turning ata(4) controller drivers into
cam(4) interface modules. When enabled, this options deprecates all ata(4)
peripheral drivers (ad, acd, ...) and interfaces and allows cam(4) drivers
(ada, cd, ...) and interfaces to be natively used instead.
As side effect of this, ata(4) mode setting code was completely rewritten
to make controller API more strict and permit above change. While doing
this, SATA revision was separated from PATA mode. It allows DMA-incapable
SATA devices to operate and makes hw.ata.atapi_dma tunable work again.
Also allow ata(4) controller drivers (except some specific or broken ones)
to handle larger data transfers. Previous constraint of 64K was artificial
and is not really required by PCI ATA BM specification or hardware.
Submitted by: nwitehorn (powerpc part)
logwtmp() gets called with the raw strings that are written to disk. For
regular user entries, this isn't too bad, but when booting/shutting
down, the contents get rather cryptic.
Just call the standardized pututxline().
long as I remember, and completely superseded by better maintained umass(4).
It's main idea was to optionally avoid CAM dependency for such devices, but
with move ATA to CAM, it is not actual any more.
No objections: hselasky@, thompsa@, arch@
- Extend XPT-SIM transfer settings control API. Now it allows to report to
SATA SIM number of tags supported by each device, implement ATA mode and
SATA revision negotiation for both SATA and PATA SIMs.
- Make ahci(4) and siis(4) to use submitted maximum tag number, when
scheduling requests. It allows to support NCQ on devices with lower tags
count then controller supports.
- Make PMP driver to report attached devices connection speeds.
- Implement ATA mode negotiation between user settings, device and
controller capabilities.
- Add support for sector size > 512 bytes and physical sector of several
logical sectors, introduced by ATA-7 specification.
- Remove some obsoleted code.
Right now sysctl just prints the major/minor numbers of a device.
Instead of rolling our own routine for this, we'd better just call
devname(3) to perform a translation to a device name for us.
portion of the capture buffer (db_capture_bufoff vs db_capture_bufsize).
This could result in outputting garbage (e.g. lots of 'p' characters if
DIAGNOSTIC is enabled) after the end of the capture buffer. While here,
fix a spelling nit.
Reported by: Mikolaj Golub to my trociny of gmail
MFC after: 3 days
value is preceded by an option without value (for example -o
option1,option2=value). Options must be separated before searching for
'='. Also compare pnextopt explicitly against NULL.
PR: bin/134069
Approved by: trasz (mentor)
packets instead of allowing the protocol stack to pick a random source port.
This fixes the behaviour where dhclient would never transition from RENEWING
to BOUND without going through REBINDING in networks which are paranoid about
DHCP spoofing, such as most mainstream cable-broadband ISP networks.
Reviewed by: brooks
Obtained from: OpenBSD (partly - I'm not convinced their solution can work)
MFC after: 1 week (pending re approval)
Don't clobber *p with '\0' when testing whether it has the value of 'F'.
Just use the semantics of strtof() properly. If it returns p, we know
that it parsed the string until it reached 'C' or 'F'.
The code has not changed since it has been imported (r161951, Sep 3,
2006).
Submitted by: Alexandre Perrin <kaworu@kaworu.ch>
MFC after: 1 week
actually initialized. In the growfs case for UFS2, no inodes were actually
being initialized and the number of inodes noted as initialized was the
number of inodes per group. This created a filesystem that was deemed
corrupted because the inodes thus added were full of garbage.
MFC after: 1 month
re-add $ipv6_enable support for backward compatibility. From
UPDATING:
1. To use IPv6, simply define $ifconfig_IF_ipv6 like $ifconfig_IF
for IPv4. For aliases, $ifconfig_IF_aliasN should be used.
Note that both variables need the "inet6" keyword at the head.
Do not set $ipv6_network_interfaces manually if you do not
understand what you are doing. It is not needed in most cases.
$ipv6_ifconfig_IF and $ipv6_ifconfig_IF_aliasN still work, but
they are obsolete.
2. $ipv6_enable is obsolete. Use $ipv6_prefer and/or
"inet6 accept_rtadv" keyword in ifconfig(8) instead.
If you define $ipv6_enable=YES, it means $ipv6_prefer=YES and
all configured interfaces have "inet6 accept_rtadv" in the
$ifconfig_IF_ipv6. These are for backward compatibility.
3. A new variable $ipv6_prefer has been added. If NO, IPv6
functionality of interfaces with no corresponding
$ifconfig_IF_ipv6 is disabled by using "inet6 ifdisabled" flag,
and the default address selection policy of ip6addrctl(8)
is the IPv4-preferred one (see rc.d/ip6addrctl for more details).
Note that if you want to configure IPv6 functionality on the
disabled interfaces after boot, first you need to clear the flag by
using ifconfig(8) like:
ifconfig em0 inet6 -ifdisabled
If YES, the default address selection policy is set as
IPv6-preferred.
The default value of $ipv6_prefer is NO.
4. If your system need to receive Router Advertisement messages,
define "inet6 accept_rtadv" in $ifconfig_IF_ipv6. The rc(8)
scripts automatically invoke rtsol(8) when the interface becomes
UP. The Router Advertisement messages are used for SLAAC
(State-Less Address AutoConfiguration).
from UDP to TCP, so that it is consistent with TCP for NFS, which
became the default at r176198. Without this change, doing an NFS mount
against a server that only supports UDP would result in an unusable
mount point if a transport protocol option wasn't specified for the
mount.
Approved by: kib (mentor)
MFC after: 3 days
does. This is not POLA violation, because there is no single file system in the
base that use MNT_IGNORE currently, although ZFS snapshots will be mounted with
MNT_IGNORE after next commit.
Reviewed by: kib
MFC after: 3 days
automatic link-local address configuration:
- Convert a sysctl net.inet6.ip6.accept_rtadv to one for the
default value of a per-IF flag ND6_IFF_ACCEPT_RTADV, not a
global knob. The default value of the sysctl is 0.
- Add a new per-IF flag ND6_IFF_AUTO_LINKLOCAL and convert a
sysctl net.inet6.ip6.auto_linklocal to one for its default
value. The default value of the sysctl is 1.
- Make ND6_IFF_IFDISABLED more robust. It can be used to disable
IPv6 functionality of an interface now.
- Receiving RA is allowed if ip6_forwarding==0 *and*
ND6_IFF_ACCEPT_RTADV is set on that interface. The former
condition will be revisited later to support a "host + router" box
like IPv6 CPE router. The current behavior is compatible with
the older releases of FreeBSD.
- The ifconfig(8) now supports these ND6 flags as well as "nud",
"prefer_source", and "disabled" in ndp(8). The ndp(8) now
supports "auto_linklocal".
Discussed with: bz and jinmei
Reviewed by: bz
MFC after: 3 days
It could be used for broad range of tasks, such as configuring drive
power management modes, caching, security and any other features and tasks,
not supported by existing drivers.
the GEOM_BSD class -- to translate the absolute offsets in the label to
relative ones. This makes bslabel(8) work correctly with GEOM_PART and
also when the BSD label is nested under arbitrary partitioning schemes.
Inspired by: Eygene Ryabinkin <rea-fbsd@codelabs.ru>
Approved by: re (kib)
GEOM_PART does not exist in the kernel, and 2) the GEOM in
question does not exist.
Additionally abort in case of programming errors that result
in neither the class nor geom not being present in the gctl
request.
Submitted by: "Andrey V. Elsukov" <bu7cher@yandex.ru>
Approved by: re (kib)
* don't clobber proxy entries
* HWMP seq number processing, including discard of old frames
* flush routing table entries based on nexthop
* print route flags in ifconfig
* more debugging messages and comments
Proxy changes submitted by sam.
Approved by: re (kib)
- fix ifconfig to ignore the non-existent interface in the current
network stack in case of '-vnet'.
- in ifconfig: actually use the local variables defined for the
vnet functions rather than modifying the global.
Reviewed by: rwatson
Approved by: re (kib)
* bridge support (sam)
* handling of errors (sam)
* deletion of inactive routing entries
* more debug msgs (sam)
* fixed some inconsistencies with the spec.
* decap is now specific to mesh (sam)
* print mesh seq. no. on ifconfig list mesh
* small perf. improvements
Reviewed by: sam
Approved by: re (kib)
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
modularize it so that new transports can be created.
Add a transport for SATA
Add a periph+protocol layer for ATA
Add a driver for AHCI-compliant hardware.
Add a maxio field to CAM so that drivers can advertise their max
I/O capability. Modify various drivers so that they are insulated
from the value of MAXPHYS.
The new ATA/SATA code supports AHCI-compliant hardware, and will override
the classic ATA driver if it is loaded as a module at boot time or compiled
into the kernel. The stack now support NCQ (tagged queueing) for increased
performance on modern SATA drives. It also supports port multipliers.
ATA drives are accessed via 'ada' device nodes. ATAPI drives are
accessed via 'cd' device nodes. They can all be enumerated and manipulated
via camcontrol, just like SCSI drives. SCSI commands are not translated to
their ATA equivalents; ATA native commands are used throughout the entire
stack, including camcontrol. See the camcontrol manpage for further
details. Testing this code may require that you update your fstab, and
possibly modify your BIOS to enable AHCI functionality, if available.
This code is very experimental at the moment. The userland ABI/API has
changed, so applications will need to be recompiled. It may change
further in the near future. The 'ada' device name may also change as
more infrastructure is completed in this project. The goal is to
eventually put all CAM busses and devices until newbus, allowing for
interesting topology and management options.
Few functional changes will be seen with existing SCSI/SAS/FC drivers,
though the userland ABI has still changed. In the future, transports
specific modules for SAS and FC may appear in order to better support
the topologies and capabilities of these technologies.
The modularization of CAM and the addition of the ATA/SATA modules is
meant to break CAM out of the mold of being specific to SCSI, letting it
grow to be a framework for arbitrary transports and protocols. It also
allows drivers to be written to support discrete hardware without
jeopardizing the stability of non-related hardware. While only an AHCI
driver is provided now, a Silicon Image driver is also in the works.
Drivers for ICH1-4, ICH5-6, PIIX, classic IDE, and any other hardware
is possible and encouraged. Help with new transports is also encouraged.
Submitted by: scottl, mav
Approved by: re
