now that all that stuff has been abstracted out of the disk drivers with
GEOM.
- Reference bsdlabel(8) rather than disklabel(8).
Ok'd by: phk, scottl (1)
Submitted by: Björn König (2)
refers to and add extra '#' comment characters at the beginning of two
lines that started with TABs, to avoid warnings like:
"/etc/make.conf", line 128: Unassociated shell command "# If set, you might need to adopt your"
"/etc/make.conf", line 129: Unassociated shell command "# nsswitch.conf(5) and remove `nis' entries."
PR: misc/89423
Submitted by: Scot W. Hetzel
- Remove the description of how to build a module.
- Remove the description of how to patch the sources.
- Refer to the polling(4) manpage on how to enable the polling mode.
- Tidy up markup.
bsd.incs.mk, and use it when installing 32-bit compat libraries
on amd64. This causes it to *not* overwrite native headers with
i386 versions, which was the case with <fenv.h> and <vgl.h>.
PR: amd64/83806
Prodded by: bde
MFC after: 1 week
more IPv4 address from a ranged list in CIRD notation:
ipv4_addrs_ed0="192.168.0.1/24 192.168.1.1-5/28"
In the process move alias processing into new ipv4_up/down functions to
more toward a less IPv4 centric world.
Submitted by: Philipp Wuensche <cryx dash freebsd at h3q dot com>
The following repo-copies were made (by Mark Murray):
sys/i386/isa/spkr.c -> sys/dev/speaker/spkr.c
sys/i386/include/speaker.h -> sys/dev/speaker/speaker.h
share/man/man4/man4.i386/spkr.4 -> share/man/man4/spkr.4
Use . instead of ${.OBJDIR}.
Move DEFSDIR and BMIBSDIR under the resp. .if clauses so that they
get defined only if DEFS and BMIBS are defined.
Submitted by: ru
use in-tree as well as for 3rd party modules. This file is more or less
what was in usr.sbin/bsnmpd/modules/Makefile.inc with some modifications
and omissions. Usage examples can be found under usr.sbin/bsnmpd/modules/*.
Idea by: phk
Reported by: scottl
I'm not very fond of using the non-standard lockf(1) here, but I
have no better idea at the moment. NetBSD uses ln(1) to create a
lock file, but this approach can result in a deadlock if make is
interrupted, leaving an orphaned lock file.
probed and attached, not on the first call to device_get_softc().
- Add a cross reference to DEVICE_PROBE regarding the caveats of using the
softc in a driver's probe routine.
- Fix a grammar bogon.
PR: docs/87176 (1)
Submitted by: Devon H. O'Dell dodell at offmyserver dot com (1)
MFC after: 3 days
microtime to bintime. However, one standaline .Nm wasn't changed, and as
a result, the manpage claimed that bintime was added in both 5.0 and 3.0.
Fix by listing microtime explicitly.
- Fix a grammar bogon.
PR: docs/87147 (1)
Submitted by: Matthew Luckie (1)
MFC after: 3 days
where applicable. The main reason for this change is that
the location of make.conf is not constant and can be
modified via __MAKE_CONF. This change also improves
hyper-text linkage in our manpages.
MFC after: 2 weeks
- Remove references to cpu_critical_*() as they no longer exist.
- Explain that any preemptions that occur during a critical section are
deferred until the current thread exits the section.
- Remove a bogus example usage of a critical section.
- Note that one can interlock critical sections with spin mutexes in
certain situations.
MFC after: 3 days
system boot, and hook it up in the system.
The separate script is needed because in the presence of various
interface lists in rc.conf ($network_interfaces, $cloned_interfaces,
$sppp_interfaces, $gif_interfaces, more to come) it is hard to start
them orderly, so that pfsync is brought up after its syncdev, which
is required for the proper startup of pfsync.
Discussed with: mlaier on -pf
MFC after: 5 days
- Remove description of poll in trap feature.
- Tell that polling should be turned on and off with ifconfig.
- Move description of kern.polling.enable to the end and say
that this a deprecated way of turning polling on.
- Remove note that idle poll has some problems in CURRENT. I failed
to find them, while Sam and Luigi failed to remember what the
problem actually were there.
replacement and has additional features which make it superior.
Discussed on: -arch
Reviewed by: thompsa
X-MFC-after: never (RELENG_6 as transition period)
- Add arm and ppc to the list of archs not supporting operations on 64-bit
integers.
- Update the sample code for acquiring a mutex to be more recent and to
take into account the recent atomic_foo_ptr() changes.
MFC after: 1 week
so. If the full list of fe(4) options is documented we can revive the
entire section.
PR: docs/86228
Submitted by: n-kogane@syd.odn.ne.jp
Helped by: Masahiro Sekiguchi <seki@jp.fujitsu.com>
MFC after: 1 week
shutdown procedures (which have a duration of more than 120 seconds).
We have two user-space affecting shutdown timeouts: a "soft" one in
/etc/rc.shutdown and a "hard" one in init(8). The first one can be
configured via /etc/rc.conf variable "rcshutdown_timeout" and defaults
to 30 seconds. The second one was originally (in 1998) intended to be
configured via sysctl(8) variable "kern.shutdown_timeout" and defaults
to 120 seconds.
Unfortunately, the "kern.shutdown_timeout" was declared "unused" in 1999
(as it obviously is actually not used within the kernel itself) and
hence was intentionally but misleadingly removed in revision 1.107 from
init_main.c. Kernel sysctl(8) variables are certainly a wrong way to
control user-space processes in general, but in this particular case the
sysctl(8) variable should have remained as it supports init(8), which
isn't passed command line flags (which in turn could have been set via
/etc/rc.conf), etc.
As there is already a similar "kern.init_path" sysctl(8) variable which
directly affects init(8), resurrect the init(8) shutdown timeout under
sysctl(8) variable "kern.init_shutdown_timeout". But this time document
it as being intentionally unused within the kernel and used by init(8).
Also document it in the manpages init(8) and rc.conf(5).
Reviewed by: phk
MFC after: 2 weeks
- Replace 'process' with 'thread' everywhere.
- Update several places to note that that the fact that default mutexes
may adaptively spin isn't necessarily MD, but is just part of the
implementation as a whole.
- Clarify the text about MTX_SPIN mutexes only being appropriate for
INTR_FAST interrupts or other low level scheduler code to make the
jargon more FreeBSD-ish rather than BSD/OS-ish.
- Also, note that it is possible that interrupts aren't blocked but just
deferred when a spin lock is held (the whole blocked vs. deferred bit is
an MD implementation detail).
- Remove statements saying that spin locks must be released in the exact
opposite order that they were acquired. This stopped being true several
years ago when we first added critical sections that stored their state
in the current thread rather than in struct mtx.
- Note that a mutex must be initialized before it is passed to any other
mutex function, not just mtx_lock.
- Clarify that mtx_trylock() only operates on MTX_DEF mutexes.
- Simplify the text about possible preemption during a mtx_unlock().
- Use complete English sentences in place of phrases in a few places.
- Clarify that it isn't ever safe to sleep with a mutex held. The kernel
tends to panic when you do that.
Requested by: scottl (7)
MFC after: 3 days
- The first "alias" "Yes" should be "No**".
- Made "builtin echo command" consistent with csh and sh manpages.
- In group of 3 interactive commands, 2 used .Pa instead of .Ic.
- "Name" section now has "builtin" and "built-in" for better apropos.
- Added these builtins: !, %, ., :, @, {, }, local, return
PR: docs/85065
Approved by: keramida
MFC after: 3 days
appear in tmpmfs and varmfs default flags explicitly.
Explain why -M is good for these file systems (it maximizes
performance and makes the system more stable at low memory
conditions by reducing the chance of thrashing.)
Bump .Dd accordingly.
MFC after: 3 days
of the form "REFUSE foo" in portsnap.conf will result in parts of the
tree matching "^foo" being (a) not extracted by "portsnap extract", (b)
not updated by "portsnap update", and (c) not having any patches or new
ports downloaded by "portsnap fetch" or "portsnap cron". The example
shown in portsnap.conf demonstrates ignoring all the language categories.
As mentioned in portsnap.conf.5, the use of an imcomplete ports tree is
not officially supported; but this is something which many users have
requested, so I'm adding it anyway.
PR: bin/85619 (but not the patch provided therein)
MFC after: 1 month
