cg
0593719507
if a device has no play or no record channels, set its simplex flag.
2000-06-01 01:32:30 +00:00
archie
258f2bb268
Fix bug where receive statistics for the bundle were not getting updated.
2000-06-01 01:29:49 +00:00
cg
b22927d9c0
if we get bad values for playctrlsize, the firmware may not have initialised
...
yet so retry.
2000-06-01 01:29:05 +00:00
hoek
9888903d86
Add a NO_LPR option. Useful for people who want to use LPRng.
...
PR: bin/18787 (David Gilbert <dgilbert@velocet.ca>)
2000-05-31 21:45:15 +00:00
jkh
eec76c7315
Update the australian NTP server entry.
...
Submitted by: Peter Matthews <peter@netwise.com.au>
2000-05-31 21:40:50 +00:00
msmith
af612b72f8
Further fixes for multiple-IO-APIC systems from Tor Egge:
...
Further experimentation showed that some Dell 2450 machines with the
prevention kludge installed still got T_RESERVED traps. CPU interrupt
vector 0x7A was observed to be triggered. This might have been the
bitwise OR of two different vectors sent from each of the IOAPICs at
the same time.
IOAPIC #0 : 0x68 --> irq 8: RTC timer interrupt
IOAPIC #1 : 0x32 --> irq 18: scsi host adapter or network interface
----
0x7a --> T_RESERVED
Both IOAPICs had ID 0.
Appendix B.3 in the MP spec indicates that the operating system is
responsible for assigning unique IDs to the IOAPICs.
The enclosed patch programs the IOAPIC IDs according to the IOAPIC
entries in the MP table.
Submitted by: tegge
2000-05-31 21:37:28 +00:00
chris
57a2f89737
Replace `manual(section)' references with proper .Xr statements.
2000-05-31 21:33:15 +00:00
chris
c50f60edbd
Replace a `manual(section)' reference with a proper .Xr statement.
2000-05-31 21:12:08 +00:00
cg
4f7eeb56e4
add a bit more diagnostic info for the bus_dmamap_load failure case
2000-05-31 19:04:12 +00:00
msmith
3f59519796
Bump the default NBUS value to 8.
2000-05-31 19:01:45 +00:00
msmith
b81e2b251f
Bump the default NBUS value to 8, in lieu of actually sizing it
...
dynamically. Too many systems have more than 4 busses now.
2000-05-31 18:55:02 +00:00
bde
533fc5ab13
Pack the SWI bits to save some time and space.
2000-05-31 16:36:20 +00:00
brian
7a2bca9178
Use mp_CheckAutoloadTimer() rather than mp_StopAutoloadTimer()
...
when opening or closing an auto link due to the autoload
setting.
Spotted by: David Hedley <david@inty.co.uk>
2000-05-31 15:35:29 +00:00
jwd
2b9e505645
With the removal of more, update the fixit floppy to contain
...
less (and symlink more to less).
Approved by: jkh
2000-05-31 15:26:03 +00:00
roberto
70068c04ad
Finland is also entitled to have an Euro character :)
...
Submitted by: Mikko Hyvarinen <morphy@morphy.iki.fi>
2000-05-31 14:53:27 +00:00
bde
96b840b7df
Add SWI_TQ_MASK to all interrupt masks except SWI_CLOCK_MASK. Use a
...
new macro SWI_LOW_MASK to give the mask for low priority SWIs instead
of hard-coding this mask as SWI_CLOCK_MASK.
Reviewed by: dfr
2000-05-31 13:32:28 +00:00
luigi
3549e61cff
Move mfs-related files to a different subtree
2000-05-31 12:27:38 +00:00
luigi
9649efa3c2
Move mfs-related files to a new location
2000-05-31 12:25:39 +00:00
roberto
0638f8b9d0
Add the Euro character on AltGr + E in these european keymaps as well.
...
Reminded by: Anders Andersson <anders@sanyusan.se>
alex@big.endian.de (Alexander Langer)
2000-05-31 12:25:26 +00:00
roberto
7f4ebdbbad
Makes AltGr + E generate the ISO code for the Euro character instead of
...
a plain 'e'.
2000-05-31 11:17:25 +00:00
nyan
f9b0e0c037
Update of isa drivers using compatability shims to use COMPAT_ISA_DRIVER().
...
Submitted by: haro@tk.kubota.co.jp (Munehiro Matsuda)
2000-05-31 10:51:53 +00:00
nyan
a055f5e636
Sync with sys/isa/ppc.c revision 1.27.
2000-05-31 10:49:58 +00:00
nyan
32de6c2e18
Removed ICMP_BANDLIM option. It no longer exists.
2000-05-31 10:49:19 +00:00
nyan
5b3b241277
Fixed most disordering.
2000-05-31 10:48:36 +00:00
nyan
6f013da1a8
Sync with sys/i386/include/bus_at386.h revision 1.9.
2000-05-31 10:47:55 +00:00
brian
417651de21
Don't use the umask to chmod local domain server sockets, use
...
the mask
2000-05-31 09:06:52 +00:00
wpaul
aeecdf0418
Rework the support for the internal autonegotiation on the 21143 and
...
workalike chips (Macronix 98713A/98715 and PNIC II). Timing is somewhat
critical: you need to bring the link as soon as possible after NWAY
is done, and the old one second polling interval was too long. Now
we poll every 10th of a second until NWAY completes (at which point
we return to the 1 second interval again to keep an eye on the link
state).
I tested all the other cards I had on hand to make sure I didn't bust
any of them and they seem to work (including the MII-based 21143 card).
This should fix some autoneg problems with DE500-BA cards and the
built-in 10/100 ethernet on some alpha systems.
(Now before anyone asks why I never noticed this before, the old code
worked just find with the Intel swich I used for testing back in NY.
Apparently not all switches are as picky about the timing.)
2000-05-31 05:40:53 +00:00
hoek
ddda2700b5
Fix an mdoc-o, and english.
2000-05-31 04:34:23 +00:00
cg
6918446010
yamaha ds1/ds1e pci sound driver - work in progress, mixer and playback only.
...
tested on ymf724f only.
conf/files entry is commented out, enable it manually to test this code and
let me know results.
2000-05-31 03:21:36 +00:00
msmith
6500faef99
/dev/rXXX -> /dev/XXX
2000-05-31 01:04:22 +00:00
msmith
2a57dc9127
Don't do anything with /dev/rXXX
2000-05-31 01:03:26 +00:00
msmith
ae1a82ed76
Don't try to do anything with the /dev/rXXX device.
2000-05-31 01:00:51 +00:00
msmith
aa722fef82
Don't try to open the /dev/rXXX device.
2000-05-31 00:58:55 +00:00
msmith
4c9f2ff600
Finish the /dev/rXXX removal job. With the libdisk fixes, this should
...
actually work again.
2000-05-31 00:57:48 +00:00
msmith
d443d7a021
/dev/rXXX -> /dev/XXX
...
This should fix sysinstall and other tools that don't expect the 'r' devices
to exist anymore (and thus don't create them).
2000-05-31 00:51:57 +00:00
green
0ebd9d0f36
Change sl(4) configuration lines to reflect its new dynamic nature.
2000-05-30 23:01:37 +00:00
green
448dde8a33
Fix the ident server up more: use ssize_t/size_t/socklen_t/int all in the
...
proper places and make the fakeid parsing code a bit less stupid. Also,
remove an "Rflag" that snuck in there (-R wouldn't be accepted by it,
anyway).
2000-05-30 22:51:05 +00:00
jhb
f680096100
Fix a 64-bit'ism in the handling of the ident service. sysctlbyname() takes
...
a size_t as its 3rd argument, which is 64-bits on the alpha. The 'len'
variable used was a int, which is only 32-bits. Use size_t as the type
for 'len' to work-around this.
2000-05-30 18:32:58 +00:00
brian
2118876875
Mention that some PPPoE servers cache MAC addresses
2000-05-30 17:06:55 +00:00
iwasaki
3102382e01
Add regex(3) matching feature for card line strings.
...
- This feature will be enabled only if the string is
enclosed by '/' something like;
card "SunDisk" "/.*/"
- Also added matching additional information strings
followed by version string. This is for the card which is
difficult to idendentify by only the manufacturer and
card version strings matching.
card "MACNICA" "MIRACLE SCSI" "mPS100" "D.0"
Reviewed by: imp
Obtained from: PAO
2000-05-30 15:33:56 +00:00
phk
84adfa25f2
Typo.
...
Spotted by: sobomax
2000-05-30 15:23:30 +00:00
msmith
b9ca17ca22
De-support 'wd'; with it making a dual appearance with 'ad', things
...
depending on libdisk to detect a list of actually-there disk devices
were providing duplicate entries (eg. sysinstall).
2000-05-30 15:18:30 +00:00
green
a637b1e5e1
Correct misspelling of INADDR_ANY as IN_ADDRANY.
2000-05-30 13:55:46 +00:00
green
e437152a2e
Make sl(4) SLIP devices dynamically expansible. Yay! =)
...
PR: kern/17758
Submitted by: David Malone <dwmalone@maths.tcd.ie>
2000-05-30 13:47:03 +00:00
ghelmer
ced1bc5bb2
Adjust the width of the first column in output from "sa -m" to match
...
the max length of user names.
PR: bin/10905
Submitted by: Ben Smithurst <ben@scientia.demon.co.uk>
2000-05-30 13:27:33 +00:00
ru
1ebca39b8d
Restore backwards compatible -R option.
...
Broken in revision 1.17.
Noticed by: hoek
2000-05-30 10:50:15 +00:00
kris
bb0b65f065
Update to the version of pam_ssh corresponding to OpenSSH 2.1 (taken
...
from the openssh port)
Submitted by: Hajimu UMEMOTO <ume@mahoroba.org>
2000-05-30 09:03:15 +00:00
dfr
9c314eee3c
Style fixes.
...
Submitted by: bde
2000-05-30 07:27:46 +00:00
imp
35315eceef
Add Digital Roamabout. This is for the wlp driver, not yet ported
...
from PAO, but I don't want to lose this entry.
Submitted by: Randy Bush
2000-05-30 06:05:10 +00:00
imp
d8ab8dc206
Add support for the modem side of the 56k combo card.
...
Submitted by: Duncan Barclay <dmlb@ragnet.demon.co.uk>
2000-05-30 05:42:57 +00:00