OPAL is a dedicated firmware acting as a hypervisor.
Add generic functions to provide all access.
Created by: Nathan Whitehorn <nw@freebsd.org>
Submitted by: Wojciech Macek <wma@freebsd.org>
The NetBSD test suite has 24 tests for awk, and we pass exactly 4 of them.
Add the necessary pieces for interested parties to easily connect the
tests and run them, but leave them disconnected for the time being.
Some of these tests outright segfault in our awk, others just exhibit the
wrong behavior.
shutdown_post_sync event. For adashutdown, this causes problems
because we need to poll for completion of the commands, but we're not
yet officially dumping yet, so the code from r326964 assumed we could
use the interrupt-driven commands rather than the polled ones. This
lead to a hang. Prevent this by also checking to see if the scheduler
is stopped to do the polling.
Reported by: markj@
Sponsored by: Netflix
Differential Review: https://reviews.freebsd.org/D13845
In particular, no probes were present for AEAD requests, but also for
some other error cases in other ioctl requests.
MFC after: 2 weeks
Sponsored by: Chelsio Communications
- Call resource_int_value() once during attach, rather than within the
pci_(read|write)_config() code path; this avoids taking a blocking mutex
to read kenv variables.
- Use a spin lock to protect non-atomic config space accesses; this matches
the behavior of Darwin's AppleMacRiscPCI driver.
Reviewed by: jhibbits
Differential Revision: https://reviews.freebsd.org/D13839
Additionally, move the overflow check logic out to WOULD_OVERFLOW() for
consumers to have a common means of testing for overflowing allocations.
WOULD_OVERFLOW() should be a secondary check -- on 64-bit platforms, just
because an allocation won't overflow size_t does not mean it is a sane size
to request. Callers should be imposing reasonable allocation limits far,
far, below overflow.
Discussed with: emaste, jhb, kp
Sponsored by: Dell EMC Isilon
The bug would cause incorrect behaviour when attempting to override
an already set environment variable with -x setenv, as long as the
variable is not the last one in the array.
Reported by: Samuel Lepetit <slepetit@apple.com>
MFC after: 2 weeks
Previously the AIO subsystem would save a snapshot of the currently
configured per-process limits the first time a process used AIO. The
process would continue to use the snapshotted limits ignoring any
changes to the global limits during the rest of its lifetime. This
change removes the snapshotted values and changes the AIO code to
always check the global values which can be toggled at runtime.
This means an administrator can now change the effective limits of
existing processes. This is more consistent with how other limits
configured via sysctl work in FreeBSD.
Reviewed by: asomers, kib
MFC after: 2 weeks
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D13819
This permits N32 hard-float binaries to use 64-bit floating point
registers (which is what N32 binaries expect) matching the N64 ABI.
Reviewed by: imp, jmallett
Sponsored by: DARPA / AFRL
Differential Revision: https://reviews.freebsd.org/D13830
(I missed the Reviewed by and review link from r327783.)
Reviewed by: brooks, dim, bapt
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D13827
For some time we have been planning to migrate to LLVM's lld linker.
Having a man page was the last blocking issue for using ld.lld to link
the base system kernel + userland, now addressed by r327770. Link the
kernel and userland libraries and binaries with ld.lld by default, for
additional test coverage.
This has been a long time in the making. On 2013-04-13 I submitted an
upstream tracking issue in LLVM PR 23214: [META] Using LLD as FreeBSD's
system linker. Since then 85 individual issues were identified, and
submitted as dependencies. These have been addressed along with two
and a half years of other lld development and improvement.
I'd like to express deep gratitude to upstream lld developers Rui
Ueyama, Rafael Espindola, George Rimar and Davide Italiano. They put in
substantial effort in addressing the issues we found affecting
FreeBSD/amd64.
To revert to using ld.bfd as the bootstrap linker, in /etc/src.conf set
WITHOUT_LLD_BOOTSTRAP=yes
If you need to set this, please follow up with a PR or post to the
freebsd-toolchain mailing list explaining how default WITH_LLD_BOOTSTRAP
failed for your use case.
Note that GNU ld.bfd is still installed as /usr/bin/ld, and will still
be used for linking ports. ld.lld can be installed as /usr/bin/ld by
setting in /etc/src.conf
WITH_LLD_IS_LLD=yes
A followup commit will set WITH_LLD_IS_LD by default, possibly after
Clang/LLVM/lld 6.0 is merged to FreeBSD.
Release notes: Yes
Sponsored by: The FreeBSD Foundation
Basic use of mallocarray to prevent overflows. Here allocation is done
with M_NOWAIT so the code is prepared for the possibility of returning
NULL values. Since mallocarray expects unsigned parameters, unsign some
related variables to minimize sign conversions.
Reviewed by: mckusick
We would previously just free the request BIO, which would either cause
the disk to stay stuck in the SYNCHRONIZING state, or result in
synchronization completing without having copied the block which
returned an error.
With this change, if the disk which returned an error is the only active
disk in the mirror, the synchronizing disk is kicked out. Otherwise, the
read is retried.
Reported and tested by: pho (previous version)
MFC after: 2 weeks
Sponsored by: Dell EMC Isilon
The driver now fully observes watchdog(9) protocol.
Previously a too large timeout was silently clamped while the correct
behavior is to disable the watchdog and leave the error as is
(i.e. to not report success).
Also, previously a too small value caused the timer to stop while the
correct behavior is to use the minimal supported value.
MFC after: 2 weeks
Upstream lld has no man page. Introduce a basic one for FreeBSD based on
ld.lld --help, with a brief introduction and additional detail for some
options.
We'll continue refining this in FreeBSD, and then submit it upstream once
the first round of edits are complete.
Submitted by: krion, Arshan Khanifar, emaste, bjk
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D13813
Iwasaki-san's copyright over. Remove FIXME code that couldn't possibly
work. Call tc_settime() with our estimate of the delta we've been
alseep (the one we print) to adjust the time. Not sure what to do
about callouts, so keep the small #ifdef in place there.
Differential Revision: https://reviews.freebsd.org/D13823
more in r317426. There's nothing in the tree that references digiio.h
(apart from digictl(8)), so no driver implements it. Since digictl(8)
was only used to control digi(4) devices, it too should go.
Add an implementation of the intrinsics invoked by __builtin_ctz{,ll} and
__builtin_clz{,ll}, and include this compilation unit on platforms that lack
assembly intrinsics for those builtins (MIPS and RISC-V).
Future cleanup work might involve bringing these into a mini libcompiler-rt
for the standalone kernel environment. Or cleaning up the approach upstream
takes for builtins in standalone environments (or just FreeBSD). For now,
at least this builds, and doesn't require modifying the vendor code.
Reported by: jeff, markj, mizhka
Reviewed by: jhb (earlier version), rpokala (comment text earlier version)
Sponsored by: Dell EMC Isilon
g_mirror_regular_request() may free the gmirror consumer for a disk
if that disk is being disconnected, after which we must not dereference
the consumer pointer.
CID: 1384280
X-MFC with: r327496
RTC chips that have a control register bit for am/pm mode, the DS13xx series
uses one of the high bits in the hour register. Thus, when setting the time
in am/pm mode, the am/pm mode flag has to be ORed into the hour.
- If aio_qphysio() returns a non-zero error code, fail the request rather
than queueing it to the AIO kproc pool to be retried via the slow path.
Currently this means that if vm_fault_quick_hold_pages() reports an
error, EFAULT is returned from the fast-path rather than retrying the
request in the slow path where it will still fail with EFAULT.
- If aio_qphysio() wishes to use the fast path for a device that doesn't
support unmapped I/O but there are already the maximum number of
such requests in flight, fail with EAGAIN as we do for other AIO
resource limits rather than queueing the request to the AIO kproc pool.
- Move the opcode check for aio_qphysio() out of the caller and into
aio_qphysio() to simplify some logic and remove two goto's while here.
It also uses a whitelist (only supported for LIO_READ / LIO_WRITE)
rather than a blacklist (skipped for LIO_SYNC).
PR: 217261
Submitted by: jkim (an earlier version)
MFC after: 2 weeks
Sponsored by: Chelsio Communications
If the MD_VERIFY flag is set, we should use O_VERIFY. If the MD_VERIFY flag
is not set, we should not.
Reviewed by: stevek
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D13814
Specifically, in aio_queue_file() the code was doing this:
if (opcode == LIO_SYNC) {
...
}
switch (opcode) {
...
case LIO_SYNC:
...
}
This moves the body of the if statement into the LIO_SYNC case of the
switch statement.
MFC after: 2 weeks
Sponsored by: Chelsio Communications
The GCC attribute causes a warning to be emitted if a caller of the
function with this attribute does not use its return value. Unlike the
traditional realloc, with reallocf(3) we don't have to check for NULL
values but we still have to make sure the result is used.
MFC after: 3 days