The netmap_rx_irq() function normally wakes up user-space threads
waiting for more packets. In this case, it is not necessary to
call it under the driver queue lock. However, if the interface is
attached to a VALE switch, netmap_rx_irq() ends up calling rxsync
on the interface (see netmap_bwrap_intr_notify()). Although
concurrent rxsyncs are serialized through the kring lock
(see nm_kr_tryget()), the lock acquire operation is not blocking.
As a result, it may happen that netmap_rx_irq() is called on
an RX ring while another instance is running, causing the
second call to fail, and received packets stall in the receive VQ.
We fix this issue by calling netmap_irx_irq() under the VQ lock.
MFC after: 1 week
The netmap_rx_irq() function may return NM_IRQ_RESCHED to inform the
driver that more work is pending, and that netmap expects netmap_rx_irq()
to be called again as soon as possible.
This change implements this behaviour in the vtnet driver.
MFC after: 1 week
When I did some bus_dma cleanup in r320528, I brought forward some sketchy
WITNESS checks from the prior x86 busdma wrappers, instead of recognizing
them as technical debt and just dropping them. Two of these were removed in
r346351 and r346851, but one remains in bounce_bus_dmamem_alloc(). This check
could be constrained to only apply in the BUS_DMA_NOWAIT case, but it's cleaner
to simply remove it and rely on the checks already present in the sleepable
allocation paths used by this function.
While here, remove another unnecessary witness check in bus_dma_tag_create
(the tag is always allocated with M_NOWAIT), and fix a couple of typos.
Reported by: cem
Reviewed by: kib, cem
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D25107
* Set the tx/rx chains based on the existing MIMO eeprom reads
* Add 3-chain rates
Tested:
* MAC/BBP RT5390 (rev 0x0502), RF RT5370 (MIMO 1T1R), 2g/5g STA
* MAC/BBP RT3593 (rev 0x0402), RF RT3053 (MIMO 3T3R), 2g/5g STA
is provably never null. Restructure the surrounding code just enough
to make the non-nullness obvious.
Reviewed by: markj
Tested by: pho
Differential Revision: https://reviews.freebsd.org/D25089
Now that I'm a proud owner of an ASUS USB-N66, I can test 2G/5G and
3-stream configurations.
For now, just flip on 5G HT rates. I've tested this in both
5G HT20 and 5G 11a modes. It's still one stream for now until
we verify that the number of streams reported (ie the MIMO below)
is actually the number of 11n streams, NOT the number of antennas.
(They don't have to match! You can have more antennas than MIMO
streams!)
Tested:
* run0: MAC/BBP RT3593 (rev 0x0402), RF RT3053 (MIMO 3T3R)
Linkers are supposed to mark PIE binaries with DF_1_PIE, such binary
cannot be correctly and usefully loaded neither by dlopen(3) nor as a
dependency of other object. For instance, we cannot do anything
useful with COPY relocations, among other things.
Glibc already added similar restriction.
Requested and reviewed by: emaste
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D25086
When WITHOUT_SENDMAIL is set, we end up with two different mailer.conf that
conflict, and hilarity ensues. There's currently three different places that
we might install mailer.conf:
- ^/etc/Makefile (package=runtime, contingent on MK_MAIL != no)
- ^/libexec/dma/dmagent/Makefile (package=dma, contingent on MK_SENDMAIL !=
no)
- ^/usr.sbin/mailwrapper/Makefile (package=utilities, contingent on
not-installed)
The mailwrapper installation will effectively never happen because the ^/etc
one will first.
This patch simplifies the whole situation; remove the ^/etc/Makefile version
and install it primarily in mailwrapper if MK_MAILWRAPPER != "no". The
scenarios covered in mailwrapper are:
- sendmail(8) is installed, dma(8) may or may not be installed
- neither sendmail(8) nor dma(8) is installed
In the first scenario, sendmail(8) is dominant so we can go ahead and
install the version in ^/etc/mail. In the unlisted scenario, sendmail(8) is
not installed but dma(8) is, we'll let ^/libexec/dma/dmagent do the
installation. In the second listed scenario, we still want to install an
example mailer.conf so just install the base sendmail(8) version.
Reviewed by: bapt
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D24924
r361601 implemented basic support for cleaing the console history buffer.
But after clearing the history buffer, it's not especially useful to be
able to scroll back through that buffer, or for the cursor position to
remain at (very likely) the bottom of the screen.
PR: 224436
Reviewed by: emaste
Differential Revision: https://reviews.freebsd.org/D25079
which happens on some laptops after returning to legacy multiplexing mode
at initialization stage.
PR: 242542
Reported by: Felix Palmen <felix@palmen-it.de>
MFC after: 1 week
IPSEC_SUPPORT can currently only cope with either IPSEC || IPSEC_SUPPORT,
not both. Refrain from building if IPSEC is set, as the resulting module
won't be able to load anyways if it's built into the kernel.
KERN_OPTS is safe here; for tied modules, it will reflect the kernel
configuration. For untied modules, it will defer to whatever is set in
^/sys/conf/config.mk, which doesn't set IPSEC for modules. The latter
situation has some risk to it for uncommon scenarios, but such is the life
of untied kernel modules.
Reported by: jenkins (a lot), O. Hartmann (once)
Generally discussed with: imp, jhb
At least one user has landed in a scenario where logo files appear to be
misnamed, and we failed to find them. Our fallback for missing logodefs is
orb/orbbw, based on the color status. In a scenario where we can't locate
the logos, though, this is not ideal. Add in one more layer of fallback
to properly just don't draw any logo if the fan has been jam packed with
foreign material.
PR: 246046
MFC after: 3 days
Currently there is no easy way of subscribing for the routing table changes.
The only existing way is to set ifa_rtrequest callback in the each protocol
ifaddr, which is not convenient or extandable.
This change provides generic notification subscription mechanism, that will
replace current ifa_rtrequest one and allow other applications such as
accelerated routing lookup modules subscribe for the changes.
In particular, this change provides 2 hooks: 1) synchronous one
(RIB_NOTIFY_IMMEDIATE), called under RIB_WLOCK, which ensures exact
ordering of the changes and 2) async one, (RIB_NOTIFY_DELAYED)
that is called after the change w/o holding locks. The latter one does not
provide any notification ordering guarantee.
Differential Revision: https://reviews.freebsd.org/D25070
The main driver for the change is the need to improve notification mechanism.
Currently callers guess the operation data based on the rtentry structure
returned in case of successful operation result. There are two problems with
this appoach. First is that it doesn't provide enough information for the
upcoming multipath changes, where rtentry refers to a new nexthop group,
and there is no way of guessing which paths were added during the change.
Second is that some rtentry fields can change during notification and
protecting from it by requiring customers to unlock rtentry is not desired.
Additionally, as the consumers such as rtsock do know which operation they
request in advance, making explicit add/change/del versions of the functions
makes sense, especially given the functions don't share a lot of code.
With that in mind, introduce rib_cmd_info notification structure and
rib_<add|del|change>_route() functions, with mandatory rib_cmd_info pointer.
It will be used in upcoming generalized notifications.
* Move definitions of the new functions and some other functions/structures
used for the routing table manipulation to a separate header file,
net/route/route_ctl.h. net/route.h is a frequently used file included in
~140 places in kernel, and 90% of the users don't need these definitions.
Reviewed by: ae
Differential Revision: https://reviews.freebsd.org/D25067
The main driver for the change is the need to improve notification mechanism.
Currently callers guess the operation data based on the rtentry structure
returned in case of successful operation result. There are two problems with
this appoach. First is that it doesn't provide enough information for the
upcoming multipath changes, where rtentry refers to a new nexthop group,
and there is no way of guessing which paths were added during the change.
Second is that some rtentry fields can change during notification and
protecting from it by requiring customers to unlock rtentry is not desired.
Additionally, as the consumers such as rtsock do know which operation they
request in advance, making explicit add/change/del versions of the functions
makes sense, especially given the functions don't share a lot of code.
With that in mind, introduce rib_cmd_info notification structure and
rib_<add|del|change>_route() functions, with mandatory rib_cmd_info pointer.
It will be used in upcoming generalized notifications.
* Move definitions of the new functions and some other functions/structures
used for the routing table manipulation to a separate header file,
net/route/route_ctl.h. net/route.h is a frequently used file included in
~140 places in kernel, and 90% of the users don't need these definitions.
Reviewed by: ae
Differential Revision: https://reviews.freebsd.org/D25067
Due to the ordering of the powerpc64 linker script, we were discarding
all notes before emitting .note.gnu.build-id. This had the effect of
generating an empty build id section and breaking the kern.build_id
sysctl added in r348611.
powerpc and powerpcspe are uneffected.
PR: 246430
MFC after: 3 days
Sponsored by: Tag1 Consulting, Inc.
Enable STP before bringing the bridges up. This avoids a switching loop,
which has a tendency to drown out progress in userspace processes,
especially on single-core systems.
Only check that we have indeed shut down one of the looped interfaces
PR: 246448
Reviewed by: melifaro
Differential Revision: https://reviews.freebsd.org/D25084
vfs_export requires security flavors be explicitly listed when
exporting as of r360900.
Use the default AUTH_SYS flavor when converting old export args to
ensure compatibility with the legacy mount syscall.
Reported by: rmacklem
Reviewed by: rmacklem
Approved by: mav (mentor)
MFC after: 3 days
Sponsored by: iXsystems, Inc.
Differential Revision: https://reviews.freebsd.org/D25045
netmap assumes the one "slot" is left unused to distinguish
the empty ring and full ring conditions. This assumption was
violated by vtnet_netmap_rxq_populate().
MFC after: 1 week
The functionality contained in this function is duplicated,
as it is already available in vtnet_txq_free_mbufs()
and vtnet_rxq_free_mbufs().
MFC after: 1 week
The vtnet_netmap_rxq_populate() function erroneously assumed
that kring->nr_hwcur = 0, i.e. the kring was in the initial
state. However, this is not always the case: for example,
when a vtnet reinit is triggered by some changes in the
interface flags or capenable.
This patch changes the behaviour of vtnet_netmap_kring_refill()
so that it always starts publishing the netmap buffers starting
from the current value of kring->nr_hwcur.
MFC after: 1 week
The field was added in r141137 in 2005 and is unused.
It avoidably grows a struct which is NOFREE and easily gets hundreds of
thousands of instances.
Reviewed by: kib
Differential Revision: https://reviews.freebsd.org/D25036
The service handler for fileargs_open() tries to pre-open multiple files
and pass descriptors for each back to the sandboxed process in a single
message. This is to amortize the cost of round-trips between the two
processes.
The service process adds a "cache" nvlist to the reply to "open",
containing file descriptors for pre-opened files. However, when adding
that nvlist to the reply, it was making a copy, effectively leaking the
cached descriptors.
While here, fix spelling in a local variable name.
PR: 241226
Reviewed by: oshogbo
MFC after: 3 days
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D25095
summary of changes, or for a more thorough overview:
https://subversion.apache.org/docs/release-notes/1.14
NOTE: there is no need to dump and reload repositories, and the working
copy format is still the same as Subversion 1.8 through 1.13.
Relnotes: yes
MFC after: 2 weeks
X-MFC-With: r361677
When -N is used the missing files are treated as empty.
PR: 233402
Submitted by: Fehmi Noyan Isi <fnoyanisi@yahoo.com>
Reported by: Roman Neuhauser <roman@sigpipe.cz>
MFC after: 3 days
Differential Revision: D25081
Various options to "diff(1)" show filenames, and traditionally make use of the
"--label" parameter, if set.
Restore this behaviour in BSD diff.
While here add a regression test
PR: 244533
Submitted by: Jamie Landeg-Jones <jamie@catflap.org>
MFC after: 3 days
This is something I added a few years ago to handle resyncing the beacon if
we miss a beacon or need to sync after association/reassociation/powersave.
However, if we're doing STA+AP mode (eg DWDS) then we don't want
to reprogram the beacons here; this may upset normal AP operation.
I missed checking for the sc->sc_swbmiss flag so I was reinitialising
the beacon timers after every beacon miss / TSFOOR option, and
that isn't likely good.
This plus ensuring that STA's are created with "-beacon" to disable
BMISS/TSFOOR processing will hopefully quieten some of the issues
I've seen with missed beacons / TSFOOR (out of range) interrupts
coming in when operating in STA mode.
Tested:
* AR9380/AR9580, STA+AP modes
