unnecessary breakage.
While here, use explicit sizes for the string fields so that we dont
have unintentional changes again in the future when key tunables change.
This still is not quite right, but a june userland is happy with
a -current kernel with these tweaks.
probably harmless in this case, since the latter is called on tty
input, which is usually a result of some system call, so we've got
plenty of stack left. It's still nice to fix these things, though, in
case somebody ever decides this driver is a good example of something
(perhaps "what you probably shouldn't do").
night of testing before merging to -stable.
Also added to code to detect TX underruns and automatically increase the
TX threshold to avoid them. Carefully placed diagnostig printf() about
this under #ifdef DIAGNOSTIC to avoid getting any panicky e-mails from
confused users, like I always do with the xl and dc drivers.
calling vtophys() and contigmalloc()/contigfree() directly. Hopefully,
I have shaken out all of the problems with busdma on the alpha now.
(Everything seems to work as expected.)
Also, change the max RX DMA limit to 1024 bytes instead of "unlimited,"
as the latter seems not to work correctly on the alpha that I tested.
(At 100Mbps, all attempts to receive frames yield RX errors.)
but it's better than the buggy behavior we have now. If we contigmalloc()
buffers in bus_dmamem_alloc(), then we must configfree() them in
bus_dmamem_free(). Trying to free() them is wrong, and will cause
a panic (at least, it does on the alpha.)
I tripped over this when trying to kldunload my busdma-ified if_rl
driver.
label if the dump device overflaps the label (which is a slight
misconfiguration). Dump routines don't use dscheck(), so the normal
write protection of the label doesn't help.
Reduced some nearby overflow bugs. In disk_dumpcheck(), there was
(fatal but fail-safe) overflow on i386's with 4GB of memory, at least
if Maxmem was the top page (can this happen?). The fix assumes that
the sector size divides PAGE_SIZE (dump routines already assume this).
In setdumpdev(), the corresponding overflow occurred with only about
2GB of memory on all machines with 32-bit ints. This allowed setdumpdev()
to succeed when it shouldn't have, but then disk_dumpcheck() failed
safe later. Except in old versions of FreeBSD like RELENG_3 where
there is no disk_dumpcheck().
PR: 28164 (label clobbering part)
MFC after: 1 week
to see if it was malloc()ed first" bug. In bus_dmamap_create(), one of
two things can happen: either we need to allocate a special map due to
some manner of bounce buffering requirement, or we can DMA a buffer
in place. On the x86 platform, the "in place" case results in
bus_dmamap_create() returning a dmamap of NULL. The bus_dmamap_destroy()
routine later checks for NULL and won't bother free()ing the map if
it detects this condition.
But on the alpha, we don't use NULL, we use a statically allocated map
called nobounce_dmamap(). Unfortunately, bus_dmamap_destroy() does not
handle the condition where we attempt to destroy such a map: it tries
to free() the dmamap, which causes a panic.
Fix: test that map != &nobounce_dmamap before trying to free() it.
With this fix, my busdma-ified if_sis driver works on the alpha. I'm
a bit alarmed that I'm the first person ever to trip over this bug, since
we have been using busdma on the alpha for a while, and since it sort
of screams out "Hi! I'm a bug! Booga-booga!" when you look at it.
(Somewhere, somebody will say: "But Bill, why don't you just not bother
destroying the maps in this case." Because the API is supposed to be
a) symetrical and b) opaque to the caller. I can't know whether it's safe
to skip the bus_dmamap_destroy() step or not without sticking my fingers
into unsafe places, which is what I wanted to avoid in the first place.)
assing an IRQ. Add better comments while I'm here.
MFC after: 1 day
# Note: That's merging all the -current pci pcic code, not just this one
# change for the Aug 15th code freeze.
register. It enables Zoom Video. It appears that on at least one
card that Monzoon is using sets these bits by default. Nothing works
when these bits are set, everything works when they are clear.
Add commentary on some of the ti bits. Make code a little clearer.
Also remove a call to pcic_pci_pd6729 which was prematurely added in
the last commit.
linux_getdents uses VOP_READDIR( ..., &ncookies, &cookies ) instead of
VOP_READDIR( ..., NULL, NULL ) because it seems to need the offsets for
linux_dirent and sizeof(dirent) != sizeof(linux_dirent)...
PR: 29467
Submitted by: Michael Reifenberger <root@nihil.plaut.de>
Reviewed by: phk
boot CPU. This was the reason reboots on SMP systems could result in
weird hangs. Unlike the x86, we do not need to switch back to the boot
CPU in order to reboot the machine. See Section 3.4.5 of Part III
(Console Interface Architecture) from the Alpha Architecture Reference
Manual (aka the Brown Book) for more info.
common_attach is wrong as common attach initialize some fileds used by
mediainit routine. This was hard to notify because loading driver as kld
lead to mediainit routine being called after common_attach, though probe_phy
is called before.
MFC after: 1 week
traps, so that ddb can keep control (almost) no matter how it is
entered. This breaks time-critical interrupts while the system is
stopped in ddb, but I haven't noticed any significant problems except
that applications become confused about the time. Lost time will be
adjusted for later. Anyway, the half-baked disabling of interrupts in
Debugger() gives the same problems for the usual way of entering ddb.
bug for bug compatibility to ddb trap handlers after fixing the debugger
trap gates to be interrupt gates, but the fix was never committed. Now
I want the fix to apply to ddb.
- fix segment limit mis-calculation for GCODE_SEL, GDATA_SEL, GPRIV_SEL,
LUCODE_SEL and LUDATA_SEL.
- move `loader(8) metadata' related printf() after cninit().
- use atop macro (address to pages) for segment limit calculation
instead of i386_btop macro (bytes to pages).
- fix style bugs for the declarations of ints.
Reviewed by: bde, msmith (and arch & audit ML)
cdevsw entries have been for a long time.
Discover that we now have two version sof the same structure.
I will shoot one of them shortly when I figure out why someone thinks
they need it. (And I can prove they don't)
(netinet/ipprotosw.h should GO AWAY)
structure is always free()ed yet only sometimes malloc()ed. In particular,
it was simply set to point to l_filename from the a linker_file_t in
link_elf_link_preload_finish(). The l_filename had been malloc()ed inside
the kern_linker.c module and was being free()ed twice: once by
link_elf_unload_file() and again by linker_file_unload(), leading to
a panic.
How to duplicate the problem:
- Pre-load a kernel module from the loader, i.e. if_sis.ko
- Boot system
- Attempt to unload module with kldunload if_sis
- Bewm
The problem here is that the case where the module was loaded with kldload
after system boot would work correctly, so this bug went unnoticed until
I stubbed my toe on it just now. (Also, you can only trip this bug if
you compile a kernel with options DDB, but that's the default now.)
Fix: remember to malloc() a separate copy of the module name for the
l_name member of the gdb linkage structure in three places where the
linkage structure can be initialized.
flags with interrupts disabled to see if we should call ast() during
doreti. This was mostly submitted by Bruce, but his original patch did
the looping in ast() in assembly rather than in the ast() function itself.
Once we've actually called into the ast() function, it's cheaper to just
loop inside the function rather than returning from the function,
performing the check, and then calling the function again. However, we
can optimize the first check to avoid calling the function at all.
Other architectures may choose to implement this optimization if they
wish but it is not required for correct operation.
Submitted by: bde
the process of exiting the kernel. The ast() function now loops as long
as the PS_ASTPENDING or PS_NEEDRESCHED flags are set. It returns with
preemption disabled so that any further AST's that arrive via an
interrupt will be delayed until the low-level MD code returns to user
mode.
- Use u_int's to store the tick counts for profiling purposes so that we
do not need sched_lock just to read p_sticks. This also closes a
problem where the call to addupc_task() could screw up the arithmetic
due to non-atomic reads of p_sticks.
- Axe need_proftick(), aston(), astoff(), astpending(), need_resched(),
clear_resched(), and resched_wanted() in favor of direct bit operations
on p_sflag.
- Fix up locking with sched_lock some. In addupc_intr(), use sched_lock
to ensure pr_addr and pr_ticks are updated atomically with setting
PS_OWEUPC. In ast() we clear pr_ticks atomically with clearing
PS_OWEUPC. We also do not grab the lock just to test a flag.
- Simplify the handling of Giant in ast() slightly.
Reviewed by: bde (mostly)
a time using the ogetdirentries() compatibility syscall. This is a
hack to ensure that rediculous values don't get passed to MALLOC().
Reviewed by: kris
for endtsleep() to be executing when msleep() resumed, for endtsleep()
to spin on sched_lock long enough for the other process to loop on
msleep() and sleep again resulting in endtsleep() waking up the "wrong"
msleep.
Obtained from: BSD/OS
removing the callout entry, return 1. If callout_stop() fails to remove
the callout entry because it is currently executing or has already been
executed, then the function returns 0. The idea was obtained from BSD/OS,
however, BSD/OS changed untimeout(), and I've just changed callout_stop()
to be more conservative.
Obtained from: BSD/OS
- Callers of asleep() and await() have been converted to calling tsleep().
The only caller outside of M_ASLEEP was the ata driver, which called both
asleep() and await() with spl-raised, so there was no need for the
asleep() and await() pair. M_ASLEEP was unused.
Reviewed by: jasone, peter
- Callers of asleep() and await() have been converted to calling tsleep().
The only caller outside of M_ASLEEP was the ata driver, which called both
asleep() and await() with spl-raised, so there was no need for the
asleep() and await() pair. M_ASLEEP was unused.
Reviewed by: jasone, peter
- Callers of asleep() and await() have been converted to calling tsleep().
The only caller outside of M_ASLEEP was the ata driver, which called both
asleep() and await() with spl-raised, so there was no need for the
asleep() and await() pair. M_ASLEEP was unused.
Reviewed by: jasone, peter
Only set sticks (and acquire sched_lock) on entry from user mode.
Add handlers for all kinds of mmu misses, and for interrupts from
user mode.
Acquire Giant before calling into the vm system so this runs with
invariants.
Try to get the restrictions for page faults on user memory from
kernel mode right.
Only set pcb_onfault and return to the alternate return code if
this is actually a fault on user memory from kernel mode.
2. Use the upcoming "tick" interface.
3. Save a call frame as well as a trap frame on proc0's initial stack.
4. Setup a pointer to the per-cpu interrupt queue.
5. Install the per-cpu pointer in interrupt and alternate globals as well.
6. Flush out setregs so exec works.
Submitted by: tmm (3, 5, 6)
2. Add spill and fill handlers for spills to the user stack on entry
to the kernel.
3. Add code to handle instruction mmu misses from user mode.
4. Add code to handle level interrupts from kernel mode and vectored
interrupt traps from either.
5. Save the pil in the trapframe on entry from kernel mode and restore
it on return.
Submitted by: tmm (1, 2)
actual end of the section. The new gas (binutils) puts in additional padding
which was misaligning the concatenated btx loader.
Reported by: Oliver Hartmann <ohartman@klima.physik.uni-mainz.de>,
Harti Brandt <brandt@fokus.gmd.de>
Tested by: Oliver Hartmann <ohartman@klima.physik.uni-mainz.de>,
David Wolfskill <dhw@whistle.com>, ps
Reviewed by: jhb
MFC after: 1 day
