Commit Graph

998 Commits

Author SHA1 Message Date
Juli Mallett
0867cb9511 o) Recognize the Lanner MR-730.
o) Fix enumeration of PHY addresses on the MR-955.
o) Parse link state for the MR-730 using the Broadcom PHY support in the SDK.
   It's not clear that this is entirely-correct, but it seems to work.  Since
   this board uses a BCM5482S, this may mean that we work correctly for copper
   but not SFI, which is untested.
2010-11-08 21:22:55 +00:00
Jung-uk Kim
3c1812acc6 Merge ACPICA 20101013. 2010-10-13 21:37:02 +00:00
Rui Paulo
653bfa0ba3 Ignore the return value of ADDCARRY(). 2010-10-13 17:16:08 +00:00
Rui Paulo
8e5fffdfb5 Properly tell the compiler that we want to ignore the return value of
certain macros.
2010-10-13 17:09:53 +00:00
Rui Paulo
f3e830e9b0 Fix several cases were a conditional operator was used instead of a
bitwise operator.

Found with:	clang
2010-10-13 17:09:16 +00:00
Rui Paulo
62e9a33814 Pass a format string to make_dev().
Found by:	clang
2010-10-13 14:57:13 +00:00
Juli Mallett
a22b69b772 o) Allow devices to override the MDIO read and write functions presented to
the miibus attached to octe interfaces.
o) Add an SMI/MDIO interface to the MV88E61XX and use it for the switch PHY on
   the Lanner MR-320.  An actual driver for the switch PHY will come later.
   Note that for now it intercepts and fakes MII_BMSR reads to prevent the
   miibus from talking to anything but the switch itself.
2010-10-02 05:43:17 +00:00
Juli Mallett
77c2091086 Add preliminary support for the Lanner MR-955. It boots multi-user but there
seem to be problems both with the on-board Ethernet interfaces and the em(4)
interfaces on PCI under FreeBSD.

Thanks to Lanner for providing access to hardware.
2010-09-19 09:19:38 +00:00
Jung-uk Kim
42fecd1294 Merge ACPICA 20100915. 2010-09-16 20:08:00 +00:00
Bjoern A. Zeeb
dd5f5f2b1b When using pf routing options, properly handle IP fragmentation
for interfaces with TSO enabled, otherwise one would see an extra
ICMP unreach, frag needed pre matching packet on lo0.
This syncs pf code to ip_output.c r162084.

PR:		kern/144311
Submitted by:	yongari via mlaier
Reviewed by:	eri
Tested by:	kib
MFC after:	8 days
2010-09-10 00:00:06 +00:00
Jung-uk Kim
709fac0616 Merge ACPICA 20100806. 2010-08-06 23:11:19 +00:00
Juli Mallett
cea2b8b915 Update the port of FreeBSD to Cavium Octeon to use the Cavium Simple Executive
library:
o) Increase inline unit / large function growth limits for MIPS to accommodate
   the needs of the Simple Executive, which uses a shocking amount of inlining.
o) Remove TARGET_OCTEON and use CPU_CNMIPS to do things required by cnMIPS and
   the Octeon SoC.
o) Add OCTEON_VENDOR_LANNER to use Lanner's allocation of vendor-specific
   board numbers, specifically to support the MR320.
o) Add OCTEON_BOARD_CAPK_0100ND to hard-wire configuration for the CAPK-0100nd,
   which improperly uses an evaluation board's board number and breaks board
   detection at runtime.  This board is sold by Portwell as the CAM-0100.
o) Add support for the RTC available on some Octeon boards.
o) Add support for the Octeon PCI bus.  Note that rman_[sg]et_virtual for IO
   ports can not work unless building for n64.
o) Clean up the CompactFlash driver to use Simple Executive macros and
   structures where possible (it would be advisable to use the Simple Executive
   API to set the PIO mode, too, but that is not done presently.)  Also use
   structures from FreeBSD's ATA layer rather than structures copied from
   Linux.
o) Print available Octeon SoC features on boot.
o) Add support for the Octeon timecounter.
o) Use the Simple Executive's routines rather than local copies for doing reads
   and writes to 64-bit addresses and use its macros for various device
   addresses rather than using local copies.
o) Rename octeon_board_real to octeon_is_simulation to reduce differences with
   Cavium-provided code originally written for Linux.  Also make it use the
   same simplified test that the Simple Executive and Linux both use rather
   than our complex one.
o) Add support for the Octeon CIU, which is the main interrupt unit, as a bus
   to use normal interrupt allocation and setup routines.
o) Use the Simple Executive's bootmem facility to allocate physical memory for
   the kernel, rather than assuming we know which addresses we can steal.
   NB: This may reduce the amount of RAM the kernel reports you as having if
       you are leaving large temporary allocations made by U-Boot allocated
       when starting FreeBSD.
o) Add a port of the Cavium-provided Ethernet driver for Linux.  This changes
   Ethernet interface naming from rgmxN to octeN.  The new driver has vast
   improvements over the old one, both in performance and functionality, but
   does still have some features which have not been ported entirely and there
   may be unimplemented code that can be hit in everyday use.  I will make
   every effort to correct those as they are reported.
o) Support loading the kernel on non-contiguous cores.
o) Add very conservative support for harvesting randomness from the Octeon
   random number device.
o) Turn SMP on by default.
o) Clean up the style of the Octeon kernel configurations a little and make
   them compile with -march=octeon.
o) Add support for the Lanner MR320 and the CAPK-0100nd to the Simple
   Executive.
o) Modify the Simple Executive to build on FreeBSD and to build without
   executive-config.h or cvmx-config.h.  In the future we may want to
   revert part of these changes and supply executive-config.h and
   cvmx-config.h and access to the options contained in those files via
   kernel configuration files.
o) Modify the Simple Executive USB routines to support getting and setting
   of the USB PID.
2010-07-20 19:25:11 +00:00
Juli Mallett
219d14fe5f Import the Cavium Simple Executive from the Cavium Octeon SDK. The Simple
Executive is a library that can be used by standalone applications and kernels
to abstract access to Octeon SoC and board-specific hardware and facilities.
The FreeBSD port to Octeon will be updated to use this where possible.
2010-07-20 07:19:43 +00:00
Bernhard Schmidt
774f94f14c - Update 6000 firmware to 9.221.4.1
- Add 6050 firmware

MFC after:	2 weeks
2010-07-15 11:26:07 +00:00
Jung-uk Kim
a88e22b7ad Merge ACPICA 20100702. 2010-07-06 20:57:28 +00:00
Rafal Jaworowski
21d30ec18d Provide kernel level headers for the libfdt code.
Reviewed by:	imp
Sponsored by:	The FreeBSD Foundation
2010-06-02 17:24:41 +00:00
Andrew Thompson
85e7bb81e9 Sync run(4) driver from author's site.
Submitted by:	Akinori Furukoshi
Obtained from:	git://gitorious.org/run/run.git
2010-05-13 00:19:03 +00:00
Bjoern A. Zeeb
82cea7e6f3 MFP4: @176978-176982, 176984, 176990-176994, 177441
"Whitspace" churn after the VIMAGE/VNET whirls.

Remove the need for some "init" functions within the network
stack, like pim6_init(), icmp_init() or significantly shorten
others like ip6_init() and nd6_init(), using static initialization
again where possible and formerly missed.

Move (most) variables back to the place they used to be before the
container structs and VIMAGE_GLOABLS (before r185088) and try to
reduce the diff to stable/7 and earlier as good as possible,
to help out-of-tree consumers to update from 6.x or 7.x to 8 or 9.

This also removes some header file pollution for putatively
static global variables.

Revert VIMAGE specific changes in ipfilter::ip_auth.c, that are
no longer needed.

Reviewed by:	jhb
Discussed with:	rwatson
Sponsored by:	The FreeBSD Foundation
Sponsored by:	CK Software GmbH
MFC after:	6 days
2010-04-29 11:52:42 +00:00
Jung-uk Kim
3f5e024c14 Merge ACPICA 20100428. 2010-04-28 22:25:27 +00:00
Warner Losh
dec52eb94c We don't need the definition for in_cksum repeated here since we get
it from machine/in_cksum.h.  This definition prevents us from using
hand-tuned assembler versions of in_cksum.

# this fixes the modules build on arm for ipfilter.
2010-04-14 20:50:07 +00:00
Bernhard Schmidt
70ed590b39 Update firmware for the 6000 series Intel cards to version 9.193.4.1.
Approved by:	rpaulo (mentor)
MFC after:	2 weeks
2010-04-10 07:07:08 +00:00
Jung-uk Kim
8c8be05f00 Merge ACPICA 20100331 (and four additional upstream patches). 2010-04-02 23:04:31 +00:00
Xin LI
06325fe0dc Integrate OpenBSD rev 1.5 of x86emu.c. 2010-03-09 22:42:24 +00:00
Jung-uk Kim
24081291d2 Since the interpreter slack mode is a tunable now, enable a local hack only
when it is set.  Note the default behaviour does not change by this change.
2010-03-09 19:39:52 +00:00
Jung-uk Kim
ca3cf4fa2c Merge ACPICA 20100304. 2010-03-05 21:39:16 +00:00
Rafal Jaworowski
21fdc27a05 Merge DTC-d75b33af.
This is a split merge because of non-uniform licensing of the DTC package
contents and the way these components will be used in the FreeBSD environment.

The original DTC package is composed of the following two major pieces:

1. sys/contrib/libfdt (BSD [dual] license)
2. contrib/dtc (GPLv2)

The libfdt component is going to be shared in all aspects of the environment:
- /boot/loader
- kernel
- dtc (the device tree compiler proper, userspace tool)
2010-02-28 21:57:35 +00:00
Andrew Thompson
abbf433556 Uuencode the rt2870 firmware into ascii like the other firmware blobs. 2010-01-29 03:35:01 +00:00
Andrew Thompson
069f1a8056 Add run(4), a driver for Ralink RT2700U/RT2800U/RT3000U USB 802.11agn devices.
This driver was written for OpenBSD by Damien Bergamini and ported over by
Akinori Furukoshi.
2010-01-28 22:24:54 +00:00
Jung-uk Kim
d46722a75a Fix a new header inclusion. 2010-01-21 21:31:39 +00:00
Jung-uk Kim
9a179dd8be Merge ACPICA 20100121. 2010-01-21 21:14:28 +00:00
Weongyo Jeong
984485a02e Fixes a firmware bug that in some devices (e.g. Netgear WG111T or
TRENDnet TEW-504UB/EU) idProduct didn't be decreased after loading the
firmware.

Pointed by:	Steven Friedrich <freebsd at insightbb.com>
Reviewed by:	sam
2010-01-19 01:04:44 +00:00
Edward Tomasz Napierala
2b05020882 Fix array overflow.
Reviewed by:	philip
2010-01-08 19:56:37 +00:00
Rui Paulo
dc1c6863fa Delete old firmware. 2009-12-29 20:15:52 +00:00
Rui Paulo
0f454b93f8 iwn(4) update. Notable changes:
* new firmware
* untested support for 1000 and 6000 series
* bgscan support
* remove unnecessary RXON changes
* allow setting of country/regdomain by enforcing channel flags read
  from the EEPROM
* suspend/resume fixes
* RF kill switch fixes
* LED adjustments
* several bus_dma*() related fixes
* addressed some LORs
* many other bug fixes

Submitted by:	Bernhard Schmidt <bschmidt at techwires.net>
Obtained from:	Brandon Gooch <jamesbrandongooch at gmail dot com> (LED
		related changes), Benjamin Kaduk <kaduk at mit dot edu>
		(LOR fixes), OpenBSD
2009-12-29 19:47:34 +00:00
Xin LI
dcc2b1ff46 Adapt OpenBSD pf's "sloopy" TCP state machine which is useful for Direct
Server Return mode, where not all packets would be visible to the load
balancer or gateway.

This commit should be reverted when we merge future pf versions.  The
benefit it would provide is that this version does not break any existing
public interface and thus won't be a problem if we want to MFC it to
earlier FreeBSD releases.

Discussed with:	mlaier
Obtained from:	OpenBSD
Sponsored by:	iXsystems, Inc.
MFC after:	1 month
2009-12-24 00:43:44 +00:00
Jung-uk Kim
572c8255e6 Merge ACPICA 20091214. 2009-12-14 22:24:04 +00:00
Jung-uk Kim
2272d05019 Merge ACPICA 20091112. 2009-11-16 21:47:12 +00:00
Attilio Rao
718cdf7f80 Remove the explicit definition of inet_aton() as it was introduced as a
general function in r199208.

Reported by:	np
Sponsored by:	Sandvine Incorporated
MFC:		1 week
2009-11-12 14:22:12 +00:00
Christian Brueffer
f11ccc426a Fix two memory leaks in error cases.
PR:		138378
Submitted by:	Patroklos Argyroudis <argp@census-labs.com>
Approved by:	mlaier
MFC after:	1 week
2009-11-05 16:30:16 +00:00
Rui Paulo
8f30200753 Updated iwn(4) driver supporting the newer series, 5000, 5150 and 5300.
Submitted by:	Bernhard Schmidt <bschmidt at techwires.net>
2009-10-23 22:04:18 +00:00
Jung-uk Kim
3219f535d9 Rewrite x86bios and update its dependent drivers.
- Do not map entire real mode memory (1MB).  Instead, we map IVT/BDA and
ROM area separately.  Most notably, ROM area is mapped as device memory
(uncacheable) as it should be.  User memory is dynamically allocated and
free'ed with contigmalloc(9) and contigfree(9).  Remove now redundant and
potentially dangerous x86bios_alloc.c.  If this emulator ever grows to
support non-PC hardware, we may implement it with rman(9) later.
- Move all host-specific initializations from x86emu_util.c to x86bios.c and
remove now unnecessary x86emu_util.c.  Currently, non-PC hardware is not
supported.  We may use bus_space(9) later when the KPI is fixed.
- Replace all bzero() calls for emulated registers with more obviously named
x86bios_init_regs().  This function also initializes DS and SS properly.
- Add x86bios_get_intr().  This function checks if the interrupt vector is
available for the platform.  It is not necessary for PC-compatible hardware
but it may be needed later. ;-)
- Do not try turning off monitor if DPMS does not support the state.
- Allocate stable memory for VESA OEM strings instead of just holding
pointers to them.  They may or may not be accessible always.  Fix a memory
leak of video mode table while I am here.
- Add (experimental) BIOS POST call for vesa(4).  This function calls VGA
BIOS POST code from the current VGA option ROM.  Some video controllers
cannot save and restore the state properly even if it is claimed to be
supported.  Usually the symptom is blank display after resuming from suspend
state.  If the video mode does not match the previous mode after restoring,
we try BIOS POST and force the known good initial state.  Some magic was
taken from NetBSD (and it was taken from vbetool, I believe.)
- Add a loader tunable for vgapci(4) to give a hint to dpms(4) and vesa(4)
to identify who owns the VESA BIOS.  This is very useful for multi-display
adapter setup.  By default, the POST video controller is automatically
probed and the tunable "hw.pci.default_vgapci_unit" is set to corresponding
vgapci unit number.  You may override it from loader but it is very unlikely
to be necessary.  Unfortunately only AGP/PCI/PCI-E controllers can be
matched because ISA controller does not have necessary device IDs.
- Fix a long standing bug in state save/restore function.  The state buffer
pointer should be ES:BX, not ES:DI according to VBE 3.0.  If it ever worked,
that's because BX was always zero. :-)
- Clean up register initializations more clearer per VBE 3.0.
- Fix a lot of style issues with vesa(4).
2009-10-19 20:58:10 +00:00
Jung-uk Kim
f556842ef6 Merge ACPICA 20091013. 2009-10-19 16:12:58 +00:00
Xin LI
0a2e9846fd Use __FBSDID to embed RCS ID. 2009-09-21 08:37:57 +00:00
Xin LI
205d67b00d Collapase interrupt supporting functions to a new module, and switch from
x86emu to this new module.

This changeset also brings a fix for bugs introduced with the initial
x86emu commit, which prevents the user from using some display mode or
cause instant reboots during mode switch.

Submitted by:	paradox <ddkprog yahoo com>
2009-09-21 08:17:57 +00:00
Jung-uk Kim
ca8a21efc8 Canonify include paths for newly added files. 2009-09-11 22:56:08 +00:00
Jung-uk Kim
d6dd1baec0 MFV: r196804
Import ACPICA 20090903
2009-09-11 22:48:53 +00:00
Xin LI
efba048eb5 - Port x86emu to FreeBSD.
- Connect x86emu to build.

Tested with:	make universe
Submitted by:	swell.k at gmail com
2009-09-09 05:53:26 +00:00
Xin LI
884e6d6087 Import x86emu from OpenBSD as of OPENBSD_4_6. 2009-09-09 01:19:26 +00:00
Poul-Henning Kamp
6778431478 Revert previous commit and add myself to the list of people who should
know better than to commit with a cat in the area.
2009-09-08 13:19:05 +00:00
Poul-Henning Kamp
b34421bf9c Add necessary include. 2009-09-08 13:16:55 +00:00