Commit Graph

15 Commits

Author SHA1 Message Date
Navdeep Parhar
62fc63abfb cxgbe(4): adjust PMRX and PMTX parameters.
MFC after:	1 week
2014-11-10 19:45:28 +00:00
Navdeep Parhar
1284501329 cxgbe(4): bump up PF4's share of some global resources.
This increases the size of the per-port RSS slice and also allows the
driver to use a larger number of tx and rx queues.

MFC after:	2 weeks
2014-10-25 00:14:44 +00:00
Navdeep Parhar
327235b3d6 cxgbe(4): Update the bundled T4 and T5 firmwares to versions 1.11.27.0.
Obtained from:	Chelsio
MFC after:	3 days
2014-06-22 23:40:20 +00:00
Navdeep Parhar
48d05478bf cxgbe(4): Update T4 and T5 firmwares to 1.9.12.0 2013-10-14 21:25:07 +00:00
Navdeep Parhar
92ad6ac7d4 Specify a timeout for the PL block.
MFC after:	3 days
2013-07-17 02:37:40 +00:00
Navdeep Parhar
f72b68a1bf - Include the T5 firmware with the driver.
- Update the T4 firmware to the latest.
- Minor reorganization and updates to the version macros, etc.

Obtained from:	Chelsio
MFC after:	1 day
2013-07-03 23:52:15 +00:00
Navdeep Parhar
3cc9b3e283 cxgbe(4): Some updates to shared code.
Obtained from:	Chelsio
MFC after:	1 week
2013-04-30 05:32:07 +00:00
Navdeep Parhar
0abd31e2f7 cxgbe(4): Ask the card's firmware to pad up tiny CPLs by encapsulating
them in a firmware message if it is able to do so.  This works out
better for one of the FIFOs in the chip.

MFC after:	5 days
2013-02-26 00:27:27 +00:00
Navdeep Parhar
d938ff1d15 cxgbe(4): Update firmware to 1.8.4.0.
MFC after:	5 days
2013-02-26 00:10:28 +00:00
Navdeep Parhar
c9bfe3d179 cxgbe(4): updates to the configuration file that controls how hardware
resources are partitioned.

- Reduce the number of virtual interfaces reserved for PF4.  This leaves
  spare room in the source MAC table and allows the driver to setup
  filters that rewrite the source MAC address.

- Reduce the number of filters and use the freed up space for the CLIP
  (Compressed Local IPv6 addresses) table.  This is a prerequisite for
  IPv6 TOE support which will follow separately in a series of commits.

MFC after:	1 week
2013-01-09 21:27:14 +00:00
Navdeep Parhar
8a7ba352b0 Update interface to firmware 1.6.2 and include the firmware in the driver.
Obtained from:	Chelsio
MFC after:	1 week
2012-09-13 06:32:52 +00:00
Navdeep Parhar
efc9fddc3d Make room for DDP page pods in the default configuration profile. While
here, bump up the L2 table's size to 4K entries.

MFC after:	2 weeks
2012-08-16 20:30:14 +00:00
Dimitry Andric
daccbb811d In sys/dev/cxgbe/firmware/t4fw_interface.h, change the enum
'fw_hdr_intfver' into an anonymous enum, which avoids a clang 3.2
warning about all the enum values being the same value.

Reviewed by:	np
MFC after:	1 week
2012-08-06 18:54:17 +00:00
Navdeep Parhar
2a5f6b0e65 cxgbe(4): update to firmware interface 1.5.2.0; updates to shared code. 2012-06-22 07:51:15 +00:00
Navdeep Parhar
733b92779e Many updates to cxgbe(4)
- Device configuration via plain text config file.  Also able to operate
  when not attached to the chip as the master driver.

- Generic "work request" queue that serves as the base for both ctrl and
  ofld tx queues.

- Generic interrupt handler routine that can process any event on any
  kind of ingress queue (via a dispatch table).

- A couple of new driver ioctls.  cxgbetool can now install a firmware
  to the card ("loadfw" command) and can read the card's memory
  ("memdump" and "tcb" commands).

- Lots of assorted information within dev.t4nex.X.misc.*  This is
  primarily for debugging and won't show up in sysctl -a.

- Code to manage the L2 tables on the chip.

- Updates to cxgbe(4) man page to go with the tunables that have changed.

- Updates to the shared code in common/

- Updates to the driver-firmware interface (now at fw 1.4.16.0)

MFC after:	1 month
2011-12-16 02:09:51 +00:00