Commit Graph

47 Commits

Author SHA1 Message Date
Marius Strobl
190cb52795 - Merge sys/sparc64/pci/psycho.c rev. 1.8:
Map the device memory belonging to resources of type SYS_RES_MEMORY into
  KVA upon activation so that rman_get_virtual() works as expected.
- In sbus_alloc_resource() checking whether toffs is 0 as an indication
  that no applicable child range was found isn't appropriate as it's
  perfectly valid for the requested SYS_RES_MEMORY resource to start at
  the beginning of a child range. So check for the RMAN still being NULL
  instead.
- As a minor runtime speed optimization break out of the loop where we
  search for the applicable child range in sbus_alloc_resource() as soon
  as it's found.
- Let sbus_setup_intr() return ENOMEM rather than 0 if it can't allocate
  memory for the interrupt clearing info.
- Actually do what the comment in sbus_setup_intr() says and disable the
  respective interrupt while fiddling with it.
- Remove some superfluous INTVEC() around inr, which already only contains
  the interrupt vector, in sbus_setup_intr().
- While here, fix a style(9) bug in sbus_setup_intr() (don't use function
  calls in initializers).

The first two changes are required for a CG6 driver.

MFC after:	2 weeks
2006-06-08 21:02:25 +00:00
Warner Losh
2f443d2d8f Set the rid for any resource obtained from rman_reserve_resource.
Reviewed by: wollman, jmg	(as were the other commits fixing this problem)
2006-04-20 04:20:41 +00:00
Marius Strobl
bdbca4ddae o lsi64854_enet_intr():
- Like lsi64854_scsi_intr() return -1 in case there was a DMA error so
    the caller can distinguish it from a normal interrupt and leave the
    reset of the DMA engine to the caller so we don't kill any state there.
  - Move the static 'dodrain' flag to struct lsi64854_softc as there can
    be more than one LSI64854 used for a LANCE in a system and reset it
    again once draining the E-cache is done so we don't keep draining the
    cache with every interrupt.
  - Remove calling sc->sc_intrchain(), we will call lsi64854_enet_intr()
    via sc->intr() in the interrupt handler of the LANCE driver and not
    use it in chained mode.

o lsi64854_pp_intr():
  - Like lsi64854_scsi_intr() return -1 in case there was a DMA error so
    the caller can distinguish it from a normal interrupt.

o Remove the no longer used sc_intrchain* from struct lsi64854_softc.

o Make lsi64854_reset(), lsi64854_setup*() and lsi64854_*_intr() static
  to lsi64854.c as we do and will only call them via the respective
  function pointers in struct lsi64854_softc.

o While here fix style(9) bugs (variable definition inside a nested scope).
2006-01-31 12:50:02 +00:00
Marius Strobl
bc0dd76f3e Revert the part of rev. 1.3 which enabled the chaining of the DMA engine
interrupt handler for the LANCE devices and remove dma_setup_intr(). We
just can't completely ignore the DMA engine in a LANCE driver anyway and
calling the DMA engine interrupt handler in the LANCE driver directly
allows to cover it by the LANCE driver lock.
2006-01-30 21:43:14 +00:00
Marius Strobl
aa3ee926a9 - Register the generic implementations for the device shutdown, suspend
and resume methods so these events propagate through the device driver
  hierarchy.
- In dma(4) enable the chaining of the DMA engine interrupt handler for
  the LANCE devices via a dma_setup_intr(). This was commented out before
  as I was unsure whether I'd use it but this is probably cleaner than
  fiddling with the DMA engine interrupt in the LANCE driver directly.
- In ebus_setup_dinfo() free 'intrs' instead of 'reg' twice in case
  setting up a child fails due to routing one of its interrupts fails. [1]

Found by:	Coverity Prevent [1]
MFC after:	3 days
2006-01-26 21:14:32 +00:00
Marius Strobl
a1a074b6b3 - Convert these bus drivers to make use of the newly introduced set of
ofw_bus_gen_get_*() for providing the ofw_bus KOBJ interface in order
  to reduce code duplication.
- While here sync the various sparc64 bus drivers a bit (handle failure
  to attach a child gracefully instead of panicing, move the printing
  of child resources common to bus_print_child() and bus_probe_nomatch()
  implementations of a bus into a <bus>_print_res() function, ...) and
  fix some minor bugs and nits (plug memory leaks present when attaching
  a bus or child device fails, remove unused struct members, ...).

Additional testing by:	kris (central(4) and fhc(4))
2005-11-22 16:39:44 +00:00
Marius Strobl
65fb49a994 - Try to not leak resources in the attach functions of the esp(4) SBus
front-end and the LSI64854 and NCR53C9x code in case one of these
  functions fails. Add detach functions to these parts and make esp(4)
  detachable.
- Revert rev. 1.7 of esp_sbus.c, since rev. 1.34 of sbus.c the clockfreq
  IVAR defaults to the per-child values.
- Merge ncr53c9x.c rev. 1.111 from NetBSD (partial):
  On reset, clear state flags and the msgout queue.
  In NetBSD code to notify the upper layer (i.e. CAM in FreeBSD) on reset
  was also added with this revision. This is believed to be not necessary
  in FreeBSD and was not merged.
  This makes ncr53c9x.c to be in sync with NetBSD up to rev. 1.114.
- Conditionalize the LSI64854 support on sbus(4) only instead of sbus(4)
  and esp(4) as it's also required for the 'dma', 'espdma' and 'ledma'
  busses/devices as well as the 'SUNW,bpp' device (printer port) which
  all hang off of sbus(4).
- Add a driver for the 'dma', 'espdma' and 'ledma' (pseudo-)busses/
  devices. These busses and devices actually represent the LSI64854 DMA
  engines for the ESP SCSI and LANCE Ethernet controllers found on the
  SBus of Ultra 1 and SBus add-on cards. With 'espdma' and 'ledma' the
  'esp' and 'le' devices hang off of the respective DMA bus instead of
  directly from the SBus. The 'dma' devices are either also used in this
  manner or on some add-on cards also as a companion device to an 'esp'
  device which also hangs off directly from the SBus. With the latter
  variant it's a bit tricky to glue the DMA engine to the core logic of
  the respective 'esp' device. With rev. 1.35 of sbus.c we are however
  guaranteed that such a 'dma' device is probed before the respective
  'esp' device which simplifies things a lot. [1]
- In the esp(4) SBus front-end read the part-unique ID code of Fast-SCSI
  capable chips the right way. This fixes erroneously detecting some
  chips as FAS366 when in fact they are not. Add explicit checks for the
  FAS100A, FAS216 and FAS236 variants instead treating all of these as
  ESP200. That way we can correctly set the respective Fast-SCSI config
  bits instead of driving them out of specs. This includes adding the
  FAS100A and FAS236 variants to the NCR53C9x core code. We probably
  still subsume some chip variants as ESP200 while in fact they are
  another variant which however shouldn't really matter as this will
  only happen when these chips are driven at 25MHz or less which implies
  not being able to run Fast-SCSI. [3]
- Add a workaround to the NCR53C9x interrupt handler which ignores the
  stray interrupt generated by FAS100A when doing path inquiry during
  boot and which otherwiese would trigger a panic.
- Add support for the 'esp' devices hanging off of a 'dma' or 'espdma'
  busses or which are companions of 'dma' devices to esp(4). In case of
  the variants that hang off of a DMA device this is a bit hackish as
  esp(4) then directly uses the softc of the respective parent to talk
  to the DMA engine. It might make sense to add an interface for this
  in order to implement this in a cleaner way however it's not yet clear
  how the requirements for the LANCE Ethernet controllers are and the
  hack works for now. [2]
  This effectively adds support for the onboard SCSI controller in
  Ultra 1 as well as most of the ESP-based SBus add-on cards to esp(4).
  With this the code for supporting the Performance Technologies SBS430
  SBus SCSI add-on cards is also largely in place the remaining bits
  were however omitted as it's unclear from the NetBSD how to couple
  the DMA engine and the core logic together for these cards.

Obtained from:	OpenBSD [1]
Obtained from:	NetBSD [2]
Clue from:	BSD/OS [3]
Reviewed by:	scottl (earlier version)
Tested with:	FSBE/S add-on card (FAS236), SSHA add-on card (ESP100A),
		Ultra 1 (onboard FAS100A), Ultra 2 (onboard FAS366)
2005-05-19 14:51:10 +00:00
Marius Strobl
410f3d914e - Add an IVAR for retrieving the interrupt group number of the parent Sbus
device and which also applies to the children. This is very usefull for
  drivers for the various subordinate busses so they don't need to fiddle
  with the OFW node of their parent themselves. As SBus busses hang of the
  nexus and we don't use the ofw_bus interface for nexus devices, yet, this
  would also require special knowledge about this in the drivers for the
  SBus children which these shouldn't need to have.
  This includes switching to use an unshifted IGN in the sc_ign member of
  the sbus(4) softc internally.
- For SBus child devices where there are variants that are actually split
  split into two SBus devices (as opposed to the first half of the device
  being a SBus device and the second half hanging off of the first one)
  like 'auxio' and 'SUNW,fdtwo' or 'dma' and 'esp' probe the SBus device
  which is a prerequisite to the driver attaching to the second one with
  a lower order. This saves us from dealing with different probe orders
  in the respective device drivers which generally is more hackish.
- Remove a stale comment about the 'specials' array above the attaching
  of the child devices. This is a remnant of the NetBSD/sparc origin of
  this code. There the 'specials' array is also used to probe certain
  devices which are prerequisites to others first. Why NetBSD soley
  relies on the devices having the expected order in the OFW tree on
  sparc64 isn't clear to me, as far as I can tell OFW doesn't guaranteed
  such things.
2005-05-19 14:47:31 +00:00
Marius Strobl
47b92dea0f Fix compilation when DEBUG is defined. 2005-04-18 02:34:22 +00:00
Marius Strobl
c64c7a0f7a Style and minor changes:
- Merge lsi64854.c rev. 1.25 from NetBSD: nuke trailing whitespace.
- Update NetBSD RCS IDs according to what was actually already merged.
- Remove dv_name from the lsi64854_softc and use device_printf() instead.
- Use __func__ instead of hardcoded function names in error messages.
- Use ulmin() instead of min() for comparing the DMA sizes as the values
  involved actually are represented by 64bit unsigned instead of 32bit
  unsigned. As far as I can't tell this doesn't make a difference in
  practice though.
- Some style(9) fixes (mainly indentation).
- Remove unnecessary braces.
2005-04-17 17:41:32 +00:00
Marius Strobl
b34639da21 Re-commit the following changes which were committed to these files
at their old location in sys/dev/esp after they were repo-copied to
sys/sparc64/sbus at rev. 1.1:

sys/dev/esp/lsi64854.c rev. 1.2
sys/dev/esp/lsi64854var.h rev. 1.2

Add some style(9) touch ups; style(9) states that new code should follow
these conventions and, well, this is a new driver.

Tested on:	i386, sparc64
Reviewed by:	scottl
2005-04-17 12:45:20 +00:00
Marius Strobl
743aeb6467 - Split the bus probe function into a bus probe and a bus attach function
with the attaching of the children done in the bus attach function like
  it's supposed to be.
- In the bus probe nomatch function print the resources of the children
  like it's done in the other sparc64 specific bus drivers.
- For the clock frequency IVAR use the per-child values and fall back to
  the bus default in case a child doesn't have the respective property
  instead of always using the bus default so a child driver doesn't need
  to obtain the per-child value itself (see also the commit message of
  sys/dev/esp/esp_sbus.c rev. 1.7).
- Add support for pass-through allocations. The comment preceding
  sbus_alloc_resource() wasn't quite correct, we need to support pass-
  through allocations for the 'espdma' and 'ledma' (pseudo-)busses which
  hang off of the SBus in Ultra 1 machines. There can also be actual
  bridges like the SBus-to-PCMCIA bridge on the SBus and the XBox (SBus
  extension box) probably also involves one.
2005-04-17 11:32:34 +00:00
Marius Strobl
b38701668b Some clean-up announced in rev. 1.31:
- Use auto-generated typedefs for the prototypes of the device interface
  functions.
- Style(9) fixes (mainly don't use function calls in initializers).
- Use __func__ instead of hardcoded function names in error messages.
- Try to make error messages sound uniform.
- Try to keep the code within 80 columns.
- Correct some typos.
- Correct some function declarations to match their prototypes.
- Remove unused headers, macros and variables.
- Remove a bzero() superfluous due to allocating with M_ZERO.
- Use FBSDID.
2005-04-17 11:28:41 +00:00
Warner Losh
60727d8b86 /* -> /*- for license, minor formatting changes 2005-01-07 02:29:27 +00:00
Tom Rhodes
acad338196 Fix paths after repocopies done by scottl
Reviewed by:	marius
OK'ed by:	scottl
2004-11-10 14:09:52 +00:00
Marius Strobl
26280d88d7 - Introduce an ofw_bus kobj-interface for retrieving the OFW node and a
subset ("compatible", "device_type", "model" and "name") of the standard
  properties in drivers for devices on Open Firmware supported busses. The
  standard properties "reg", "interrupts" und "address" are not covered by
  this interface because they are only of interest in the respective bridge
  code. There's a remaining standard property "status" which is unclear how
  to support properly but which also isn't used in FreeBSD at present.
  This ofw_bus kobj-interface allows to replace the various (ebus_get_node(),
  ofw_pci_get_node(), etc.) and partially inconsistent (central_get_type()
  vs. sbus_get_device_type(), etc.) existing IVAR ones with a common one.
  This in turn allows to simplify and remove code-duplication in drivers for
  devices that can hang off of more than one OFW supported bus.
- Convert the sparc64 Central, EBus, FHC, PCI and SBus bus drivers and the
  drivers for their children to use the ofw_bus kobj-interface. The IVAR-
  interfaces of the Central, EBus and FHC are entirely replaced by this. The
  PCI bus driver used its own kobj-interface and now also uses the ofw_bus
  one. The IVARs special to the SBus, e.g. for retrieving the burst size,
  remain.
  Beware: this causes an ABI-breakage for modules of drivers which used the
  IVAR-interfaces, i.e. esp(4), hme(4), isp(4) and uart(4), which need to be
  recompiled.
  The style-inconsistencies introduced in some of the bus drivers will be
  fixed by tmm@ in a generic clean-up of the respective drivers later (he
  requested to add the changes in the "new" style).
- Convert the powerpc MacIO bus driver and the drivers for its children to
  use the ofw_bus kobj-interface. This invloves removing the IVARs related
  to the "reg" property which were unused and a leftover from the NetBSD
  origini of the code. There's no ABI-breakage caused by this because none
  of these driver are currently built as modules.
  There are other powerpc bus drivers which can be converted to the ofw_bus
  kobj-interface, e.g. the PCI bus driver, which should be done together
  with converting powerpc to use the OFW PCI code from sparc64.
- Make the SBus and FHC front-end of zs(4) and the sparc64 eeprom(4) take
  advantage of the ofw_bus kobj-interface and simplify them a bit.

Reviewed by:	grehan, tmm
Approved by:	re (scottl)
Discussed with:	tmm
Tested with:	Sun AX1105, AXe, Ultra 2, Ultra 60; PPC cross-build on i386
2004-08-12 17:41:33 +00:00
Warner Losh
48375ebec9 These don't need RMAN_RESOURCE_VISIBLE now that rman is visible 2004-07-03 20:56:16 +00:00
Marius Strobl
4eae91a8f7 These need __RMAN_RESOURCE_VISIBLE, too. 2004-06-30 23:21:07 +00:00
Scott Long
c31d0cf77b Port the NetBSD esp(4) driver. This only includes the sbus front-end, so
its primary use is for the FEPS/FAS366 SCSI found in Sun Ultra 1e and 2
machines.  Once the pci front-end is ported, this driver can replace the
amd(4) driver.

The code as-is is fairly stable.  I've disabled tagged-queueing until I can
figure out a corruption bug related to it.  I'm importing it now so that
people with these machines can (finally) stop netbooting and report bugs
before 5.3.
2004-06-10 05:11:39 +00:00
Poul-Henning Kamp
6b2f1cf005 Add missing <sys/module.h> #includes 2004-06-04 11:52:25 +00:00
Warner Losh
2fcbca0d85 Remove advertising clause from University of California Regent's
license, per letter dated July 22, 1999 and email from Peter Wemm,
Alan Cox and Robert Watson.

Approved by: core, peter, alc, rwatson
2004-04-07 05:00:01 +00:00
Thomas Moestl
38c174739c The compatibility specification property is named "compatible", not
"compat".

Spotted by:	Marius Strobl <marius@alchemy.franken.de>
2004-03-27 22:39:47 +00:00
David E. O'Brien
f01ac8a3dd Don't confuse NULL with 0. 2003-12-26 14:22:26 +00:00
Warner Losh
3d11ce04c6 s=include <ofw/=include <dev/ofw/= to reflect removal of -I$S/dev 2003-08-23 00:11:16 +00:00
Scott Long
f6b1c44d1f Mega busdma API commit.
Add two new arguments to bus_dma_tag_create(): lockfunc and lockfuncarg.
Lockfunc allows a driver to provide a function for managing its locking
semantics while using busdma.  At the moment, this is used for the
asynchronous busdma_swi and callback mechanism.  Two lockfunc implementations
are provided: busdma_lock_mutex() performs standard mutex operations on the
mutex that is specified from lockfuncarg.  dftl_lock() is a panic
implementation and is defaulted to when NULL, NULL are passed to
bus_dma_tag_create().  The only time that NULL, NULL should ever be used is
when the driver ensures that bus_dmamap_load() will not be deferred.
Drivers that do not provide their own locking can pass
busdma_lock_mutex,&Giant args in order to preserve the former behaviour.

sparc64 and powerpc do not provide real busdma_swi functions, so this is
largely a noop on those platforms.  The busdma_swi on is64 is not properly
locked yet, so warnings will be emitted on this platform when busdma
callback deferrals happen.

If anyone gets panics or warnings from dflt_lock() being called, please
let me know right away.

Reviewed by:	tmm, gibbs
2003-07-01 15:52:06 +00:00
Thomas Moestl
6d3b2a3cad Further cleanup of the sparc64 busdma implementation:
- Move prototypes for sparc64-specific helper functions from bus.h to
  bus_private.h
- Move the method pointers from struct bus_dma_tag into a separate
  structure; this saves some memory, and allows to use a single method
  table for each busdma backend, so that the bus drivers need no longer
  be changed if the methods tables need to be modified.
- Remove the hierarchical tag method lookup. It was never really useful,
  since the layering is fixed, and the current implementations do not
  need to call into parent implementations anyway. Each tag inherits
  its method table pointer and cookie from the parent (or the root tag)
  now, and the method wrapper macros directly use the method table
  of the tag.
- Add a method table to the non-IOMMU backend, remove unnecessary
  prototypes, remove the extra parent tag argument.
- Rename sparc64_dmamem_alloc_map() and sparc64_dmamem_free_map() to
  sparc64_dma_alloc_map() and sparc64_dma_free_map(), move them to a
  better place and use them for all map allocations and deallocations.
- Add a method table to the iommu backend, and staticize functions,
  remove the extra parent tag argument.
- Change the psycho and sbus drivers to just set cookie and method table
  in the root tag.
- Miscellaneous small fixes.
2003-06-18 16:41:36 +00:00
Thomas Moestl
ad9d5b934b Remove the psycho and sbus iommu function stubs, and put the pointer
to the iommu_state structure directly into dt_cookie. The stubs have
not been needed for a long time now.
2003-06-11 20:30:52 +00:00
Scott Long
7e71df9339 Bring back bus_dmasync_op_t. It is now a typedef to an int, though the
BUS_DMASYNC_ definitions remain as before.  The does not change the ABI,
and reverts the API to be a bit more compatible and flexible.  This has
survived a full 'make universe'.

Approved by:	re (bmah)
2003-05-27 04:59:59 +00:00
Scott Long
c87d464f28 De-orbit bus_dmamem_alloc_size(). It's a hack and was never used anyways.
No need for it to pollute the 5.x API any further.

Approved by:	re (bmah)
2003-05-26 04:00:52 +00:00
Thomas Moestl
8a85ba6c7e - Reduce the DVMA preallocation limit from 128kB to 32kB. 128kB were
quite excessive, and caused the available space to be used up too
  easily. The new limit should be a better estimation of how much the
  caller will need at most.
- Double the IOTSB size 64kB, for a DVMA area size of 64MB.

This should fix DMA problems on e450s and other large machines due
to DVMA space exhaustion, which were introduced in my last IOMMU
code revision in January.

Reported and tested by:	fenner
2003-05-02 01:21:37 +00:00
Hidetoshi Shimokawa
8b8d5d06d1 fix typo in the previous commit. 2003-04-12 06:43:28 +00:00
Maxime Henrion
141bacb048 Change the operation parameter of bus_dmamap_sync() from an
enum to an int and redefine the BUS_DMASYNC_* constants as
flags.  This allows us to specify several operations in one
call to bus_dmamap_sync() as in NetBSD.
2003-04-10 23:03:33 +00:00
Warner Losh
a163d034fa Back out M_* changes, per decision of the TRB.
Approved by: trb
2003-02-19 05:47:46 +00:00
Scott Long
c07f24ca0c Fix some more missing dt_ prefixes for dma tag fields. 2003-01-29 17:41:29 +00:00
Scott Long
5193a34646 Implement bus_dmamem_alloc_size() and bus_dmamem_free_size() as
counterparts to bus_dmamem_alloc() and bus_dmamem_free().  This allows
the caller to specify the size of the allocation instead of it defaulting
to the max_size field of the busdma tag.

This is intended to aid in converting drivers to busdma.  Lots of
hardware cannot understand scatter/gather lists, which forces the
driver to copy the i/o buffers to a single contiguous region
before sending it to the hardware.  Without these new methods, this
would require a new busdma tag for each operation, or a complex
internal allocator/cache for each driver.

Allocations greater than PAGE_SIZE are rounded up to the next
PAGE_SIZE by contigmalloc(), so this is not suitable for multiple
static allocations that would be better served by a single
fixed-length subdivided allocation.

Reviewed by:	jake (sparc64)
2003-01-29 07:25:27 +00:00
Alfred Perlstein
44956c9863 Remove M_TRYWAIT/M_WAITOK/M_WAIT. Callers should use 0.
Merge M_NOWAIT/M_DONTWAIT into a single flag M_NOWAIT.
2003-01-21 08:56:16 +00:00
Thomas Moestl
fe461235a2 Change the iommu code to be able to handle more than one DVMA area per
map. Use this new feature to implement iommu_dvmamap_load_mbuf() and
iommu_dvmamap_load_uio() functions in terms of a new helper function,
iommu_dvmamap_load_buffer(). Reimplement the iommu_dvmamap_load()
to use it, too.
This requires some changes to the map format; in addition to that,
remove unused or redundant members.
Add SBus and Psycho wrappers for the new functions, and make them
available through the respective DMA tags.
2003-01-06 21:59:54 +00:00
Thomas Moestl
0415010cbd Bump the IOMMU TSB size to 32kB, to match the default size on PCI
systems.
2003-01-06 19:48:31 +00:00
Thomas Moestl
08707f05a0 Prefix the members of struct bus_space_tag and struct bus_dma_tag with
a uniqifier. No functional changes.
2003-01-06 19:43:10 +00:00
Thomas Moestl
7bee014426 1.) fix a copy-and-paste-o in a panic() message
2.) pass the requesting child device (instead of the bus one) up when
    handling interrupt resources
3.) remeber to mark the resource list entry as unused in
    sbus_release_resource().

Reported by:	scottl (3)
2003-01-06 16:36:05 +00:00
Thomas Moestl
f57d04ab1d Always initialize the UPA target module id in the interrupt mapping
register to the one of the processor doing the interrupt setup. This
is required since this field is preinitialized to 0, but there exist
machines which have no processor with a MID of 0 (e.g. e450s with 1 or 2
processors).

Add some more macros for handle the interrupt mapping registers, and
rename some existing ones for consistency.

Approved by:	re
2002-12-01 23:30:26 +00:00
Thomas Moestl
bb4c2b1298 Remove some long-dead cruft in the interrupt handling code which was
never used in FreeBSD.

Approved by:	re
2002-12-01 23:13:59 +00:00
Maxime Henrion
44b4810fbe Typo fix.
Reviewed by:	tmm
2002-08-19 22:57:32 +00:00
Matt Jacob
1936600631 Set interrupt clear pointer for SBus slots to point to correct spot. 2002-07-25 20:14:59 +00:00
Thomas Moestl
f42d907165 When multiple IOMMUs are present in a system, use a single TSB for all
of them, and couple them by always performing all operations on all
present IOMMUs. This is required because with the current API there
is no way to determine on which bus a busdma operation is performed.

While being there, clean up the iommu code a bit.

This should be a step in the direction of allow some of larger machines
to work; tests have shown that there still seem to be problems left.
2002-07-16 18:17:03 +00:00
Thomas Moestl
e8e2c56650 Revamp the busdma implementation a bit:
- change the IOMMU support code so that it supports overcommittting the
  available DVMA memory, while still allocating as lazily as possible.
  This is achieved by limiting the preallocation, and deferring the
  allocation to map load time when it fails. In the latter case, the
  DVMA memory reserved for unloaded maps can be stolen to free up enough
  memory for loading a map.
- allow NULL settings in the method tables, and search the parent tags
  until an appropriate implementation is found. This allows to remove some
  kluges in the old implementation.
2002-03-24 02:50:53 +00:00
Thomas Moestl
633541ac6e Add support for the SBus, which is used in early Sun UltraSPARC machines.
Ported from NetBSD.
2002-02-13 16:11:36 +00:00