Commit Graph

1664 Commits

Author SHA1 Message Date
Yoshihiro Takahashi
ee6020c993 Add the ACPI Panasonic extras driver.
Submitted by:	OGAWA Takaya <t-ogawa@triaez.kaisei.org> and nyan
2004-07-21 14:47:54 +00:00
Nate Lawson
b9e96ac139 Fix the alpha (and others) module build by only building fdc_acpi.c on
i386 and amd64.  The only other ACPI machine (ia64) doesn't support
floppy drives.  Tested by:  make MACHINE={pc98,i386,amd64,alpha,sparc64}
2004-07-16 18:37:00 +00:00
Seigo Tanimura
0739ea1de2 Rename the sound device drivers:
- `sound'
  The generic sound driver, always required.

- `snd_*'
  Device-dependent drivers, named after the sound module names.
  Configure accordingly to your hardware.

In addition, rename the `snd_pcm' module to `sound' in order to sync
with the driver names.

Suggested by:	cg
2004-07-16 04:00:08 +00:00
Nate Lawson
aa21251d11 Add fdc_acpi to module build, bump WARNS to 2. 2004-07-15 16:44:14 +00:00
Hidetoshi Shimokawa
fbf96e52bb Replace DDB with KDB. 2004-07-13 09:37:49 +00:00
Warner Losh
8edceb05bf Remove stray line with just a tab
Remove usbdevs_data.h, it isn't used by the module

Noticed by: Pawel Worach
2004-07-12 21:59:06 +00:00
Doug Rabson
363eade1f1 Add fwip module. 2004-07-12 13:13:17 +00:00
Doug Rabson
1b2d87d900 Add fwip module.
Submitted by: simokawa
2004-07-12 13:12:56 +00:00
Marcel Moolenaar
3096307b3d Build uart_dbg.c for remote GDB support. 2004-07-10 23:01:35 +00:00
Bruce M Simpson
28e23873bc Document compile-time switches here as I'm going to yank them from
if_de.c.
2004-07-09 02:38:25 +00:00
Brian Somers
0ac4013324 Change the following environment variables to kernel options:
bootp -> BOOTP
    bootp.nfsroot -> BOOTP_NFSROOT
    bootp.nfsv3 -> BOOTP_NFSV3
    bootp.compat -> BOOTP_COMPAT
    bootp.wired_to -> BOOTP_WIRED_TO

- i.e. back out the previous commit.  It's already possible to
pxeboot(8) with a GENERIC kernel.

Pointed out by: dwmalone
2004-07-08 22:35:36 +00:00
Yoshihiro Takahashi
d5103548b4 - Merged from sys/dev/fdc/fdc.c revision 1.275.
- Break out the cbus front end from fd.c.
- Remove the pccard support because it was broken.
2004-07-08 13:56:17 +00:00
Brian Somers
59e1ebc9b5 Change the following kernel options to environment variables:
BOOTP -> bootp
    BOOTP_NFSROOT -> bootp.nfsroot
    BOOTP_NFSV3 -> bootp.nfsv3
    BOOTP_COMPAT -> bootp.compat
    BOOTP_WIRED_TO -> bootp.wired_to

This lets you PXE boot with a GENERIC kernel by putting this sort of thing
in loader.conf:

    bootp="YES"
    bootp.nfsroot="YES"
    bootp.nfsv3="YES"
    bootp.wired_to="bge1"

or even setting the variables manually from the OK prompt.
2004-07-08 13:40:33 +00:00
Maksim Yevmenkin
23d1e148af Make bluetooth compile on all platforms
Reviewed by:	imp, ru
2004-07-07 22:48:30 +00:00
Warner Losh
6d6fa4fdc9 Break out the isa and pccard front ends from fdc. This is the first
step in making this driver more attachment neutral.  Others plan on
adding acpi front ends.

Still need to cleanup the MI part of the driver because it isn't as
bus independent as it could be.
2004-07-07 22:35:27 +00:00
Tim J. Robbins
3bc482ec1c By popular request, add a workaround that allows large (>128GB or so)
FAT32 filesystems to be mounted, subject to some fairly serious limitations.

This works by extending the internal pseudo-inode-numbers generated from
the file's starting cluster number to 64-bits, then creating a table
mapping these into arbitrary 32-bit inode numbers, which can fit in
struct dirent's d_fileno and struct vattr's va_fileid fields. The mappings
do not persist across unmounts or reboots, so it's not possible to export
these filesystems through NFS. The mapping table may grow to be rather
large, and may grow large enough to exhaust kernel memory on filesystems
with millions of files.

Don't enable this option unless you understand the consequences.
2004-07-03 13:22:38 +00:00
Pawel Jakub Dawidek
e1237b285b Introduce GEOM_LABEL class.
This class is used for detecting volume labels on file systems:
UFS, MSDOSFS (FAT12, FAT16, FAT32) and ISO9660.
It also provide native labelization (there is no need for file system).

g_label_ufs.c is based on geom_vol_ffs from Gordon Tetlow.
g_label_msdos.c and g_label_iso9660.c are probably hacks, I just found
where volume labels are stored and I use those offsets here,
but with this class it should be easy to do it as it should be done by
someone who know how.
Implementing volume labels detection for other file systems also should
be trivial.

New providers are created in those directories:
/dev/ufs/ (UFS1, UFS2)
/dev/msdosfs/ (FAT12, FAT16, FAT32)
/dev/iso9660/ (ISO9660)
/dev/label/ (native labels, configured with glabel(8))

Manual page cleanups and some comments inside were submitted by
Simon L. Nielsen, who was, as always, very helpful. Thanks!
2004-07-02 19:40:36 +00:00
Mark Santcroos
ca57093825 Set WARNS=2 for the module build of ACPI.
Approved by:	njl
2004-07-01 04:14:55 +00:00
Yoshihiro Takahashi
1f00798b3a The ahb module is not needed for pc98. 2004-06-30 13:09:13 +00:00
Nate Lawson
4209cd533b Add glue for building acpi_quirk.c 2004-06-30 04:47:31 +00:00
Warner Losh
1c534adad8 Add ahb module for i386 and alpha (the onlt two platforms that have eisa
bus)
2004-06-29 21:20:17 +00:00
Warner Losh
dc8db96da3 Add the ahb module for old Adaptec 1742 drivers now that eisa bus
interface is cleaner.
2004-06-29 20:50:24 +00:00
Nate Lawson
14bb3e5e7d Add acpi_if.h dependencies to module build. 2004-06-29 18:59:01 +00:00
Warner Losh
143a002e40 Build usbdevs.h 2004-06-28 19:06:30 +00:00
Warner Losh
4c42b42a79 Add usbdevs.h and pccarddevs.h to the build list, as appropriate. This is needed to build as part of world or in src/sys/modules. 2004-06-27 12:33:20 +00:00
Julian Elischer
327b288e5c Convert Netgraph to use mbuf tags to pass its meta information around.
Thanks to Sam for importing tags in a way that allowed this to be done.

Submitted by:	Gleb Smirnoff <glebius@cell.sick.ru>
Also allow the sr and ar drivers to create netgraph versions of their modules.
Document the change to the ksocket node.
2004-06-25 19:22:05 +00:00
Roman Kurakin
182968e86b Clean CLEANFILES. 2004-06-23 14:22:14 +00:00
David E. O'Brien
74fcfc4f28 Enable 'vinum' on AMD64. 2004-06-22 23:15:01 +00:00
Mark Murray
3410878421 Give zlib the ability to be a module that can be depended on,
in the MODULE_DEPEND() sense.
2004-06-20 17:42:35 +00:00
Max Laier
7c1fe95333 Commit pf version 3.5 and link additional files to the kernel build.
Version 3.5 brings:
 - Atomic commits of ruleset changes (reduce the chance of ending up in an
   inconsistent state).
 - A 30% reduction in the size of state table entries.
 - Source-tracking (limit number of clients and states per client).
 - Sticky-address (the flexibility of round-robin with the benefits of
   source-hash).
 - Significant improvements to interface handling.
 - and many more ...
2004-06-16 23:24:02 +00:00
Max Laier
a306c902b8 Prepare for pf 3.5 import:
- Remove pflog and pfsync modules. Things will change in such a fashion
   that there will be one module with pf+pflog that can be loaded into
   GENERIC without problems (which is what most people want). pfsync is no
   longer possible as a module.
 - Add multicast address for in-kernel multicast pfsync protocol. Protocol
   glue will follow once the import is done.
 - Add one more mbuf tag
2004-06-16 22:59:06 +00:00
Lukas Ertl
22d462f133 Add a module directory for geom_vinum. 2004-06-12 21:18:40 +00:00
Marius Strobl
7ad8bf410d Fix typo that prevents esp_sbus.c and lsi64854.c from being built on sparc64. 2004-06-10 13:02:29 +00:00
Scott Long
c31d0cf77b Port the NetBSD esp(4) driver. This only includes the sbus front-end, so
its primary use is for the FEPS/FAS366 SCSI found in Sun Ultra 1e and 2
machines.  Once the pci front-end is ported, this driver can replace the
amd(4) driver.

The code as-is is fairly stable.  I've disabled tagged-queueing until I can
figure out a corruption bug related to it.  I'm importing it now so that
people with these machines can (finally) stop netbooting and report bugs
before 5.3.
2004-06-10 05:11:39 +00:00
Warner Losh
f22c26808e Add eisa_if.h 2004-06-09 21:52:12 +00:00
Warner Losh
a7ac8cb9c9 Add eisa_if.h to the list of things to build for new eisa_if.m for the
case where we build modules with world.
2004-06-09 21:51:02 +00:00
David E. O'Brien
64477aef1d style.Makefile(5) 2004-06-09 08:27:05 +00:00
Darren Reed
578a650271 Recognise NOINET6 as an indication to not build IPv6 enabled source even
if FreeBSD header files, etc, support it.

Submitted by:	Sergey Mokryshev <mokr@mokr.net>
2004-06-08 23:52:22 +00:00
Poul-Henning Kamp
5dba30f15a add missing #include <sys/module.h> 2004-05-30 20:27:19 +00:00
Tony Ackerman
e03f8cdc4f First release of ixgb driver for the Intel(R) PRO/10GbE Family of Adapters. This driver has
been developed for use with FreeBSD, version 4.8 and later.

Submitted by:	Hema Joyce
Reviewed by: 	Prafulla Deuskar
Approved by: 	Prafulla Deuskar
MFC after:	1 week
2004-05-28 00:23:00 +00:00
Warner Losh
dba6dd177b Move to generating pccarddevs.h on the fly, both for the kernel and
the modules.

Also generate usbdevs.h automatically now, but a non-kernel file is
stopping that at the moment.
2004-05-26 00:53:10 +00:00
Pawel Jakub Dawidek
7dc92b13d0 - Connect geom(8) and its libraries to the build.
- Connect geom_stripe and geom_nop modules to the build.
- Connect STRIPE and NOP classes to the LINT build.
- Disconnect gconcat(8) from the build.

Supported by:	Wheel - Open Technologies - http://www.wheel.pl
2004-05-20 10:37:13 +00:00
Pawel Jakub Dawidek
4eb75f7bf4 Modules Makefiles for geom_stripe and geom_nop.
Supported by:	Wheel - Open Technologies - http://www.wheel.pl
2004-05-20 10:27:20 +00:00
Roman Kurakin
4dba35d192 Connect Cronyx Tau-PCI to the system. 2004-05-17 14:24:52 +00:00
Peter Pentchev
a6af156093 Unbreak the fdc module build after the repocopy of sys/isa/fd.c to
sys/dev/fdc/fdc.c.
2004-05-17 10:48:42 +00:00
Peter Wemm
1c4a1c34b7 Disable ndis module on amd64. It doesn't compile. For example,
hal_raise_irql(void) doesn't take an argument, but it is called with one.
eg: irql = FASTCALL1(hal_raise_irql, DISPATCH_LEVEL);
This is hidden by the macros on i386, but becomes a compile error on amd64
since the arguments are actually checked.
2004-05-16 22:24:57 +00:00
Ruslan Ermilov
278d864be2 Fixed the disordering from rev. 1.371. 2004-05-16 13:58:27 +00:00
Yoshihiro Takahashi
2621fd00aa Move the ichwd to i386 only. 2004-05-13 11:13:55 +00:00
Dag-Erling Smørgrav
cae8da6164 Add a driver for the watchdog timer function present on the LPC interface
bridge in Intel ICH-series chipsets.

The original implementation was by W. Daryl Hawkins of Texas A&M, but I
have made substantial modifications.
2004-05-11 18:21:38 +00:00
Roman Kurakin
a412a08e96 Add support for Cronyx Tau-PCI adapters. 2004-05-05 16:14:00 +00:00
Joerg Wunsch
b4fa702e39 Enable the build of the vinum KLD on sparc64. It is known to work so
there's no reason to not build it.
2004-05-05 08:24:57 +00:00
Pawel Jakub Dawidek
b8d68ca022 Connect geom_gate.ko to the build. 2004-05-03 21:12:29 +00:00
Marius Strobl
0e59ab9692 Remove the source file for the sio(4) EBus attachment here, too. 2004-04-30 18:28:26 +00:00
Pawel Jakub Dawidek
57e069969b Makefile for geom_gate.ko. 2004-04-30 16:09:28 +00:00
Vinod Kashyap
3c12ea23e0 Added 3ware's twa.
Reviewed by: ps
2004-04-27 17:57:45 +00:00
Roman Kurakin
8cd65c072e Add ng_sppp(4) to the modules build process. 2004-04-25 08:56:46 +00:00
Philip Paeps
647e5349ec Enable the led-toggling magic. Compiling files which are in the kernel into
modules is a very nice way to produce hard-to-find panics.  Who would look for
a bug in a Makefile anyway?

Has anyone seen the pointy hat? :-o

Approved by:	njl (mentor)
2004-04-23 17:41:05 +00:00
Philip Paeps
2fb38b860c Hook up acpi_asus and its manual page in two more places I managed to overlook
last night.  Sorry about that :-o

Spotted by:	njl (mentor, spotter of forgetfulness)
2004-04-23 06:29:08 +00:00
Philip Paeps
a2c4a178ab Missed this out in my last commit. Makefile for the acpi_asus driver. 2004-04-22 21:30:56 +00:00
Nate Lawson
28aee9f11e Fix the build. opt_asr.h is gone.
Beer or equivalent to?	njl
2004-04-22 02:22:18 +00:00
Nate Lawson
c014ef115c Divide the drivers into essential (pci, thermal) and mobile (lid,
battery, etc.)
2004-04-21 02:16:07 +00:00
Darren Reed
e885d52740 IPv6 is on by default in GENERIC so enable IPv6 in IPFilter too by default.
PR:		kern/57730
Submitted by:	FUKAUMI Naoki <fukaumi@soum.co.jp>
2004-04-20 14:06:42 +00:00
Nate Lawson
e69d8e61f3 Remove opt_da.h from the Makefile as well. Duplication of the option in
both the Makefile and sys/conf/options is what led to this oversight.
Apologies for breaking the build.
2004-04-19 17:26:46 +00:00
Ruslan Ermilov
b462702f94 A simple packet distribution node type that acts like an Ethernet hub. 2004-04-17 12:42:17 +00:00
Marcel Moolenaar
4880b26184 Include nehemiah.c only on i386, as is done for the non-modules
build.
2004-04-11 15:40:18 +00:00
Alexander Kabaev
f5de1edad3 Fix module build during buildworld with MODULES_WITH_WORLD defined. 2004-04-10 19:41:15 +00:00
Vinod Kashyap
b64d6f9ac2 Changed comments following changes to not bundle firmware by default.
Approved by: re
2004-04-10 02:41:22 +00:00
Scott Long
2f0fecd7ab Don't include the firmware image by default as it adds 500k (uncompressed) to
the module.

Reviewed by:	vinod
2004-04-10 02:00:47 +00:00
Mark Murray
e7806b4c0e Reorganise the entropy device so that high-yield entropy sources
can more easily be used INSTEAD OF the hard-working Yarrow.
The only hardware source used at this point is the one inside
the VIA C3 Nehemiah (Stepping 3 and above) CPU. More sources will
be added in due course. Contributions welcome!
2004-04-09 15:47:10 +00:00
Max Laier
1ffe5d762b Make pf* modules respect NOINET6 from make.conf(5) in order to build them
for INET6-less kernel.

Requested by:	many
Approved by:	bms(mentor)
2004-04-06 15:12:50 +00:00
Vinod Kashyap
99635d6cdd Initial check-in of the device driver for 3ware's 9000 series
PATA/SATA RAID controllers.  This driver is a SIM under CAM, and
so, behaves like a driver for a SCSI controller.
2004-03-30 03:46:00 +00:00
Peter Wemm
b21126c6b3 Clean up the stub fake vnode locking implemenations. The main reason this
stuff was here (NFS) was fixed by Alfred in November.  The only remaining
consumer of the stub functions was umapfs, which is horribly horribly
broken.  It has missed out on about the last 5 years worth of maintenence
that was done on nullfs (from which umapfs is derived).  It needs major
work to bring it up to date with the vnode locking protocol.  umapfs really
needs to find a caretaker to bring it into the 21st century.

Functions GC'ed:
vop_noislocked, vop_nolock, vop_nounlock, vop_sharedlock.
2004-03-29 22:41:21 +00:00
Roman Kurakin
6ca77a6ff3 Connect ctau driver (Cronyx-Tau/ISA) to modules build process.
Approved by:	imp (mentor)
2004-03-25 17:20:45 +00:00
Roman Kurakin
8b96678536 sppp (4) to netgraph (4) node. As always: I'l connect it to the
system after extra check.

Approved by:	imp (mentor)
Approved by:	julian (in general)
2004-03-24 17:24:01 +00:00
Marcel Moolenaar
562174ff37 Add uart_subr.c 2004-03-20 22:41:52 +00:00
Max Khon
c11857b462 Generate opt_inet.h.
Add opt_inet.h to SRCS.
2004-03-18 09:45:17 +00:00
Yoshihiro Takahashi
c069ddf147 Move the arl to i386 only. 2004-03-16 12:43:08 +00:00
Scott Long
36254177e0 Remove the module reference for RAIDframe 2004-03-16 12:27:34 +00:00
Scott Long
846ca5d04f Remove RAIDFrame. It hasn't worked since GEOM replaced the old disk
mini-layer.  I don't have time to bing it forward into the GEOM world, and
no one else has stepped forward to claim it.  It'll be in the Attic for safe
keeping for now.
2004-03-16 12:23:43 +00:00
Max Khon
798f0e1603 Add arl(4): driver for Aironet Arlan 655 wireless adapters.
MFC after:	2 weeks
2004-03-15 22:24:28 +00:00
Warner Losh
5c9d7c3a68 Kill bogus isa compat opt file. 2004-03-15 11:27:39 +00:00
Max Laier
8d69c48be5 Link pf to the build and install:
This adds the former ports registered groups: proxy and authpf as well as
the proxy user. Make sure to run mergemaster -p in oder to complete make
installworld without errors.

This also provides the passive OS fingerprints from OpenBSD (pf.os) and an
example pf.conf.

For those who want to go without pf; it provides a NO_PF knob to make.conf.

__FreeBSD_version will be bumped soon to reflect this and to be able to
change ports accordingly.

Approved by:	bms(mentor)
2004-03-08 22:03:29 +00:00
Benno Rice
bde778e9f2 Add a netgraph node to handle ATM LLC encapsulation. This currently handles
ethernet (tested) and FDDI (not tested).  The main use for this is on ADSL (or
other ATM) connections where bridged ethernet is used, PPPoE being a prime
example.

There is no manual page as yet, I will write one shortly.

Reviewed by:	harti
2004-03-08 10:54:35 +00:00
Bill Paul
d329ad6035 Add preliminary support for PCMCIA devices in addition to PCI/cardbus.
if_ndis.c has been split into if_ndis_pci.c and if_ndis_pccard.c.
The ndiscvt(8) utility should be able to parse device info for PCMCIA
devices now. The ndis_alloc_amem() has moved from kern_ndis.c to
if_ndis_pccard.c so that kern_ndis.c no longer depends on pccard.

NOTE: this stuff is not guaranteed to work 100% correctly yet. So
far I have been able to load/init my PCMCIA Cisco Aironet 340 card,
but it crashes in the interrupt handler. The existing support for
PCI/cardbus devices should still work as before.
2004-03-07 02:49:06 +00:00
Bill Paul
51d22ccf42 - Some older Atheros drivers want KeInitializeTimer(), so implement it,
along with KeInitializeTimerEx(), KeSetTimer(), KeSetTimerEx(),
  KeCancelTimer(), KeReadStateTimer() and KeInitializeDpc(). I don't
  know for certain that these will make the Atheros driver happy since
  I don't have the card/driver combo needed to test it, but these are
  fairly independent so they shouldn't break anything else.

- Debugger() is present even in kernels without options DDB, so no
  conditional compilation is necessary (pointed out by bde).

- Remove the extra km_acquirecnt member that I added to struct kmutant
  and embed it within an unused portion of the structure instead, so that
  we don't make the structure larger than it's defined to be in Windows.
  I don't know what crack I was smoking when I decided it was ok to do
  this, but it's worn off now.
2004-03-04 23:04:02 +00:00
Bill Paul
db2585fd12 Add proper support for DbgPrint(): only print messages if bootverbose
is set, since some drivers with debug info can be very chatty.

Also implement DbgBreakPoint(), which is the Windows equivalent of
Debugger(). Unfortunately, this forces subr_ntoskrnl.c to include
opt_ddb.h.
2004-03-03 17:57:05 +00:00
Roman Kurakin
749ffe1842 1. Add modules makefile for Cronyx Tau/ISA driver (ctau).
Approved by: imp (mentor)
2004-03-02 16:51:34 +00:00
Ruslan Ermilov
407ea29095 Netgraph node type for IEEE 802.1Q VLAN tagging. 2004-03-01 17:22:16 +00:00
Nate Lawson
355ff5fe33 Hook acpi_video up to the build. 2004-03-01 08:15:26 +00:00
Nate Lawson
c58375c3a5 Add the ACPI standard video extensions driver. I've done some style cleanup
but a bit more reamins to be done.  For now, it is usable.

Submitted by:	Taku YAMAMOTO <taku@cent.saitama-u.ac.jp>
2004-03-01 08:12:56 +00:00
Bernd Walter
7de8778318 add driver for BWCT console management serials 2004-03-01 02:34:49 +00:00
Nate Lawson
e8577ac876 Clean all the object files whether or not ACPI_DEBUG is specified. 2004-02-28 19:51:44 +00:00
MIHIRA Sanpei Yoshiro
cdd40f3bd6 add support DM9601(DAVICOM USB to Ethernet MAC Controller with Integrated 10/100 PHY)
- Corega FEther USB-TXC

PR:		kern/62932
Submitted by:	HASHI Hiroaki <hashiz@tomba.cskk-sv.co.jp>
Obtained from:	NetBSD
2004-02-28 00:12:47 +00:00
Max Laier
cc5934f5af Tweak existing header and other build infrastructure to be able to build
pf/pflog/pfsync as modules. Do not list them in NOTES or modules/Makefile
(i.e. do not connect it to any (automatic) builds - yet).

Approved by: bms(mentor)
2004-02-26 03:53:54 +00:00
Pawel Jakub Dawidek
f5ebf83f3f Connect geom_concat.ko module to the build.
Approved by:	scottl (mentor)
2004-02-23 20:03:53 +00:00
Pawel Jakub Dawidek
e1ae50791e Makefile needed for building geom_concat module.
Approved by:	scottl (mentor)
2004-02-19 15:43:58 +00:00
Roman Kurakin
126a20d4c2 Adding missing cx (cronyx/Sigma) entry.
Approved by:	imp (mentor)
2004-02-14 21:14:38 +00:00
Ruslan Ermilov
9673a2c2d0 Removed -g from CFLAGS. There is a better way to build debugging
versions of the modules, and unconditionally putting -g in CFLAGS
has negative impact on the size of the resulting .ko object, even
now that debugging symbols are always stripped.
2004-02-13 10:11:01 +00:00
David E. O'Brien
66c59e7562 Always build ext2fs module. There is no written policy preventing the
building of GPL'ed modules.
2004-01-28 04:16:13 +00:00
David E. O'Brien
848b79deef Enable ndis for AMD64 (for the time that modules are supported)... 2004-01-28 04:15:10 +00:00
Maksim Yevmenkin
18d948adb1 Add NO_BLUETOOTH knob to the build process
Requested by:	phk
Reviewed by:	imp (mentor), ru
2004-01-28 00:42:51 +00:00
Ruslan Ermilov
d8239e2877 Removed custom "load" and "unload" targets.
Removed "deinstall" targets -- the idea is to provide the standard
"deinstall" target.
2004-01-19 14:00:26 +00:00
Ruslan Ermilov
9cf7b16038 Normalize SUBDIR. 2004-01-19 12:36:08 +00:00
Ruslan Ermilov
b8eaa978fc - Build things in pure alphabetical dictionary order.
- Unify the conditional assignments section so that architectural
  exclusions come first, sorted, then options and !options, sorted
  by the option name, also in directory order, then architecture
  specific sections, sorted by the architecture name, with i386
  being a traditional exception.

Prodded by:	bde
2004-01-16 15:55:29 +00:00
Atsushi Onoe
d148e81e76 Use generic net80211 framework for awi driver.
Restore awi to be workable again; it was broken..
XXX: The initialization is still unreliable yet, it sometimes fails on
     some card.
2004-01-15 10:04:21 +00:00
Yoshihiro Takahashi
65d28db3b2 Include "../Makefile.inc" to propagate the configuration to subdirectories. 2004-01-13 13:08:27 +00:00
Ruslan Ermilov
0799be5978 MODULE_DEPEND is a C macro, not a make(1). 2004-01-13 11:30:37 +00:00
Ruslan Ermilov
5ef42ab64d bsd.kmod.mk does not deal with manpages anymore. 2004-01-13 11:28:51 +00:00
Ruslan Ermilov
63f030791d Don't put .depend in CLEANFILES, it's cleaned by cleandepend. 2004-01-13 11:13:00 +00:00
Nate Lawson
cc609df826 Hook up acpi_toshiba 2004-01-12 19:30:57 +00:00
Nate Lawson
4fd3a4fdd2 Add the ACPI Toshiba extras driver (hotkeys, LCD backlight, video output,
forced fan control, and CPU throttling).

Submitted by:	Hiroyuki Aizu <aizu@navi.org>
2004-01-11 19:18:38 +00:00
David E. O'Brien
21f1e37cbd Add Audigy support.
I started with a year-old patch by Orlando Bassotto
<orlando.bassotto@ieo-research.it>, and ported it to 5.2-CURRENT along with
fixing the problems working with pre-Audigy cards.
2004-01-11 10:30:56 +00:00
Yoshihiro Takahashi
8d6649fef6 The ida module is not needed for pc98. 2004-01-11 09:15:13 +00:00
Matthew N. Dodd
99e5f60af4 ida(4) module. PCI only for now. 2004-01-11 07:01:30 +00:00
Bill Paul
431b5bd6e7 Implement NdisOpenFile()/NdisCloseFile()/NdisMapFile()/NdisUnmapFile().
By default, we search for files in /compat/ndis. This can be changed with
a systcl. These routines are used by some drivers which need to download
firmware or microcode into their respective devices during initialization.

Also, remove extraneous newlines from the 'built-in' sysctl/registry
variables.
2004-01-09 03:57:00 +00:00
Nate Lawson
9bb87cde3e Always clean all files, including ones under ACPI_DEBUG when doing a
"make clean".
2004-01-08 16:38:32 +00:00
Bruce Evans
04bf9e6707 Use double quotes instead of single quotes for echos to build options
headers as in most other modules Makefiles (5 yesterday, none now).
Fixed any simple nearby style bugs (not many).
2003-12-29 09:15:48 +00:00
Bruce Evans
8e128ecdf2 Fixed some style bugs (mainly the bad examples @echo, NOMAN, and non-use
of ${.TARGET}).  This was the last instances of @echo in module Makefiles
after it was removed in sio/Makefile.  NOMAN is nonsense in module
Makefiles, and was removed, but came back here and in too many other
places.
2003-12-29 09:03:38 +00:00
Bruce Evans
8a1a7f65e2 Fixed some style bugs:
- SRCS was totally disordered.
- the echos to create options headers were hidden using '@'.
- the args of echos to create options headers were single-quoted.
- the target names for the rules to create options headers were repeated.
- the unused option COMPAT_FREEBSD4 was put in opt_compat.h.
2003-12-29 08:45:38 +00:00
Bruce Evans
1c07192538 Fixed some style bugs. SRCS and the opt_*.h rules were totally
disordered.  This commit only fixes the external disorder by
rearranging whole lines.
2003-12-29 08:35:33 +00:00
Yoshihiro Takahashi
a19cac5c3c Fix to support pc98 and currect typo. 2003-12-28 12:27:34 +00:00
Warner Losh
34f40c9b63 New sio module. A number of people have suggested this over the years
(most recently bde), so I'll commit the module I've had knocking
around in my tree for a while.  This may have some rough edges, so if
you are able to build it on non-i386 platform (including pc98) please
let me know you succeeded.  When I get enough reports, I'll connect it
to the build.  If there are problems, feel free to fix them.

Suggested by: bde
2003-12-27 19:50:37 +00:00
Nate Lawson
d571e11b4f Move the acpi module down a directory. This will allow us to import
other ACPI-specific drivers into sys/modules/acpi/.
2003-12-24 03:49:38 +00:00
Bruce M Simpson
37621fd5d9 Push m_apply() and m_getptr() up into the colleciton of standard mbuf
routines, and purge them from opencrypto.

Reviewed by:	sam
Obtained from:	NetBSD
Sponsored by:	spc.org
2003-12-15 21:49:41 +00:00
Bill Paul
c42411d56f Turn off build of if_ndis.ko by default, since it depends on an
autogenerated file (ndis_driver_data.h) which by definition can't
be available unless the user creates it.
2003-12-12 04:45:15 +00:00
Bill Paul
87feaafc5b Grrr. Put the right .PATH statements in the right Makefiles. 2003-12-11 23:22:44 +00:00
Bill Paul
940311dc21 Ack! Only build if_ndis.ko and ndis.ko if arch == i386. 2003-12-11 23:06:54 +00:00
Bill Paul
c854fc1092 Commit the first cut of Project Evil, also known as the NDISulator.
Yes, it's what you think it is. Yes, you should run away now.

This is a special compatibility module for allowing Windows NDIS
miniport network drivers to be used with FreeBSD/x86. This provides
_binary_ NDIS compatibility (not source): you can run NDIS driver
code, but you can't build it. There are three main parts:

sys/compat/ndis: the NDIS compat API, which provides binary
compatibility functions for many routines in NDIS.SYS, HAL.dll
and ntoskrnl.exe in Windows (these are the three modules that
most NDIS miniport drivers use). The compat module also contains
a small PE relocator/dynalinker which relocates the Windows .SYS
image and then patches in our native routines.

sys/dev/if_ndis: the if_ndis driver wrapper. This module makes
use of the ndis compat API and can be compiled with a specially
prepared binary image file (ndis_driver_data.h) containing the
Windows .SYS image and registry key information parsed out of the
accompanying .INF file. Once if_ndis.ko is built, it can be loaded
and unloaded just like a native FreeBSD kenrel module.

usr.sbin/ndiscvt: a special utility that converts foo.sys and foo.inf
into an ndis_driver_data.h file that can be compiled into if_ndis.o.
Contains an .inf file parser graciously provided by Matt Dodd (and
mercilessly hacked upon by me) that strips out device ID info and
registry key info from a .INF file and packages it up with a binary
image array. The ndiscvt(8) utility also does some manipulation of
the segments within the .sys file to make life easier for the kernel
loader. (Doing the manipulation here saves the kernel code from having
to move things around later, which would waste memory.)

ndiscvt is only built for the i386 arch. Only files.i386 has been
updated, and none of this is turned on in GENERIC. It should probably
work on pc98. I have no idea about amd64 or ia64 at this point.

This is still a work in progress. I estimate it's about %85 done, but
I want it under CVS control so I can track subsequent changes. It has
been tested with exactly three drivers: the LinkSys LNE100TX v4 driver
(Lne100v4.sys), the sample Intel 82559 driver from the Windows DDK
(e100bex.sys) and the Broadcom BCM43xx wireless driver (bcmwl5.sys). It
still needs to have a net80211 stuff added to it. To use it, you would
do something like this:

# cd /sys/modules/ndis
# make; make load
# cd /sys/modules/if_ndis
# ndiscvt -i /path/to/foo.inf -s /path/to/foo.sys -o ndis_driver_data.h
# make; make load
# sysctl -a | grep ndis

All registry keys are mapped to sysctl nodes. Sometimes drivers refer
to registry keys that aren't mentioned in foo.inf. If this happens,
the NDIS API module creates sysctl nodes for these keys on the fly so
you can tweak them.

An example usage of the Broadcom wireless driver would be:

# sysctl hw.ndis0.EnableAutoConnect=1
# sysctl hw.ndis0.SSID="MY_SSID"
# sysctl hw.ndis0.NetworkType=0 (0 for bss, 1 for adhoc)
# ifconfig ndis0 <my ipaddr> netmask 0xffffff00 up

Things to be done:

- get rid of debug messages
- add in ndis80211 support
- defer transmissions until after a status update with
  NDIS_STATUS_CONNECTED occurs
- Create smarter lookaside list support
- Split off if_ndis_pci.c and if_ndis_pccard.c attachments
- Make sure PCMCIA support works
- Fix ndiscvt to properly parse PCMCIA device IDs from INF files
- write ndisapi.9 man page
2003-12-11 22:34:37 +00:00
Warner Losh
a0b7a7df3e hea is gone, remove its module 2003-12-07 07:04:39 +00:00
Warner Losh
f33a379b6a Remove hea module. 2003-12-07 07:03:07 +00:00
John Baldwin
b75d244710 Remove SMP option support from building the ACPI module as it is no longer
needed.

Approved by:	re (murray)
Requested by:	njl
2003-12-05 15:49:01 +00:00
John Baldwin
8eca42d505 - Reenable building of the ACPI module on i386.
- Remove 'device acpi' from i386 GENERIC and revert back to using ACPI as
  a module by default.

Approved by:	re (scottl / blanket)
2003-12-03 21:13:06 +00:00
John Baldwin
559b9254c4 Add madt.c to the list of sources for i386.
Approved by:	re (scottl / blanket)
2003-12-03 21:10:02 +00:00
Warner Losh
88afb90f3c Updated cx driver commit part 1: bring in the new kernel driver.
This is the vastly updated cx drvier from Roman Kurakin <rik@cronyx.ru>
who has been patiently waiting for this update for sometime.

The driver is mostly a rewrite from the version we have in the tree.
While some similarities remain, losing the little history that the old
driver has is not a big loss, and the re@ felt it was easier this way (less
error prone).

The userland parts of this update will be committed shortly.

The driver is not connected to the build yet.  I want to make sure I
don't break any platform at any time, so I want to test that with
these files in the tree before I continue (on the off chance I'm
forgetting a file).

I changed the DEBUG macro to CX_DEBUG from the code that was submitted
(to not break when we go to building with opt_global.h after the
release), as well adding $FreeBSD$.

Submitted by: Roman Kurakin
Approved by: re@ <scottl>
2003-12-03 07:29:38 +00:00
Nate Lawson
b6426963c4 * Add acpi_pcpu_get_id(idx, *acpi_id, *cpu_id) which fetches the
idx'th present CPU with pc_acpi_id equal to *acpi_id.  If *acpi_id
  does not match that processor's pc_acpi_id, return the value for
  ProcId derived from the MADT in *acpi_id.  If pc_acpi_id is 0xffffffff,
  always override it with the value of *acpi_id.  Finally, return
  pc_cpuid in *cpu_id and use that as our primary key.

* Use pc_cpuid as our unique key because we know it is valid since
  MD code set it.  The values for ProcId in the ASL and MADT don't
  match up on some machines (!), forcing us to fall back to ordered
  probing in that case.

* Remove some #ifdef SMP since the refcount doesn't hurt performance
  and will be needed for dynamic _CST objects.  Only one #ifdef SMP
  (for smp_rendezvous) remains.

* Hook up SMP in the compile flags in the Makefile.

Tested by:	marcel, truckman
Approved by:	re (scottl)
2003-11-26 19:01:33 +00:00
Warner Losh
3193579b66 o Remove @- from the ln and change it to a -sf. This was bogus, and
regocnized as such at the time.  Now that the other bogons in the
  tree have been fixed, we can remove this ugly kludge.
o Remove stale/bogus opt_foo.h files.  These are left over from
  by-gone resources.  And they point to the need, yet again, to
  improve the build system so meta information is only in one place.

Submitted by: ru
Reviewed by: bde
Approved by: re@ (jhb)
2003-11-19 05:08:27 +00:00
Robert Watson
2dd0f3209f Revert a NOOP change to Makefile that slipped into the last commit.
Pointed out by:	tjr
2003-11-18 00:52:30 +00:00
Robert Watson
a557af222b Introduce a MAC label reference in 'struct inpcb', which caches
the   MAC label referenced from 'struct socket' in the IPv4 and
IPv6-based protocols.  This permits MAC labels to be checked during
network delivery operations without dereferencing inp->inp_socket
to get to so->so_label, which will eventually avoid our having to
grab the socket lock during delivery at the network layer.

This change introduces 'struct inpcb' as a labeled object to the
MAC Framework, along with the normal circus of entry points:
initialization, creation from socket, destruction, as well as a
delivery access control check.

For most policies, the inpcb label will simply be a cache of the
socket label, so a new protocol switch method is introduced,
pr_sosetlabel() to notify protocols that the socket layer label
has been updated so that the cache can be updated while holding
appropriate locks.  Most protocols implement this using
pru_sosetlabel_null(), but IPv4/IPv6 protocols using inpcbs use
the the worker function in_pcbsosetlabel(), which calls into the
MAC Framework to perform a cache update.

Biba, LOMAC, and MLS implement these entry points, as do the stub
policy, and test policy.

Reviewed by:	sam, bms
Obtained from:	TrustedBSD Project
Sponsored by:	DARPA, Network Associates Laboratories
2003-11-18 00:39:07 +00:00
Shunsuke Akiyama
565f53bbaa Make interrupt pipe interval time configurable.
- Add kernel options: {UPLCOM,UVSCOM}_INTR_INTERVAL
- Add sysctl variables: 'hw.usb.{uplcom,uvscom}.interval'

MFC after:	1 week
2003-11-16 12:26:10 +00:00
Warner Losh
e0ce91e18b Quick hack to make the nfsclient.ko loadable again. This brings in
the nfsv4 files.  It is intended to be a short-term bridge while
alfred deals with the problem in a better way (eg, don't hesitate to
back this out when the real fix comes along).  I've not heard back
from alfred in a few hours and other people are hitting this problem.

Approved by: markm, rwatson, grog, murray
2003-11-16 00:00:06 +00:00
Nate Lawson
6b74f9b7f5 Implement Cx CPU idle states and updated throttling support.
* Use the cpu_idle_hook() to do idling for C1-C3.
* Use both _CST and the FADT to detect Cx states.
* Use both _PTC and P_CNT for controlling throttling.
* Add a notify handler to detect changes in _CST and _PSS
* Call the _INI function for each processor if present.  This will be
  done by ACPI-CA in the future.
* Fix a bug on SMP systems where CPUs will attach multiple times if the
  bus is rescan.
* Document new sysctls for controlling idling.
2003-11-15 19:26:06 +00:00
Alfred Perlstein
c3521a9fdc nfs4 client module.
Not hooked up to the build yet.
2003-11-15 01:02:00 +00:00
Bruce M Simpson
f16770ae7e Fix a bug whereby the physical endpoints of a gre(4) tunnel would not
be printed, if the module were loaded into a kernel which had INET6 enabled.

The gre(4) driver does not use INET6, nor is it specified for IPv6. The
tunnel_status() function in ifconfig(8) is somewhat overzealous and assumes
that all tunnel interfaces speak KAME ifioctls.

This fix follows the path of least resistance, by teaching gre(4) about
the two KAME ifioctls concerned.

PR:	bin/56341
2003-11-14 20:58:00 +00:00
Robert Watson
599bcd064c Following the repo-copy from src/sys/modules/mac_none/Makefile,
I neglected to update the filenames/etc in mac_stub.  Do so now.
2003-11-11 21:23:54 +00:00
Ruslan Ermilov
5a4e8b0f24 Don't compile with -g by default; there's a better way to build modules with
debug support.
2003-11-10 12:54:54 +00:00
Scott Long
7773002178 Add the Makefile glue for the udf_iconv module.
Submitted by: imura@ryu16.org
2003-11-07 09:38:05 +00:00
Hartmut Brandt
4295875a6d The layer 3 (signalling) of NgATM netgraph node: ng_uni. This node
handles user and network side signaling and partly PNNI.
2003-11-07 09:15:14 +00:00
Warner Losh
eb57864fad List the three modules that I have that aren't connected to the build. 2003-11-06 08:46:52 +00:00
Scott Long
396c3653e4 Update the udf module makefile for the udf_iconv module
Submitted by: imura@ryu16.org
2003-11-05 06:30:59 +00:00
Warner Losh
0cbc7cc255 ppbus_if.c is necessary if you are loading submodules. 2003-11-04 02:55:03 +00:00
Warner Losh
fce33fc5eb Module for cs driver 2003-11-04 01:36:35 +00:00
John Baldwin
75556f82c8 Temporarily disable the acpi(4) module on i386 until issues revolving
SMP probing and the MADT table can be sorted out.  For now, if you want
ACPI, you must compile it into your kernel statically using 'device acpi'.
2003-11-03 22:44:09 +00:00
Hartmut Brandt
ed70dde057 Put the address handling, traffic descripto handling and the
message encoding and decoding stuff into the base module. All of this
is accessed by several of the NgATM modules and putting this into
atmbase reduceds the memory footprint.
2003-11-03 09:18:52 +00:00
Hidetoshi Shimokawa
869093b15d Add dumb console driver and related bits.
dcons(4): very simple console and gdb port driver
dcons_crom(4): FireWire attachment
dconschat(8): User interface to dcons

Tested with: i386, i386-PAE, and sparc64.
2003-10-24 15:44:10 +00:00
Hartmut Brandt
0376020649 Module build infrastructure for the NgATM SAA layer. 2003-10-24 07:42:08 +00:00
Hidetoshi Shimokawa
e9e688e243 Add SBP-II target mode driver.
Though this is still incomplete and has some missing features such as
exclusive login and event notification, it may be enough for someone
who wants to play with it.

This driver is supposed to work with firewire(4), targ(4) of CAM(4)
and scsi_target(8) which can be found in /usr/share/example/scsi_target.
This driver doesn't require sbp(4) which implements initiator mode.

Sample configuration:

Kernel: (you can use modules as well)
device	firewire
device	scbus
device	targ
device	sbp_targ

After reboot:
# mdconfig -a -t malloc -s 10m
md0
# scsi_target 0:0:0 /dev/md0
(Assuming sbp_targ0 on scbus0)

You should find the 10MB HDD on FreeBSD/MacOS X/WinXP or whatever connected
to the target using FireWire.

Manpage is not finished yet.
2003-10-18 05:41:31 +00:00
Maksim Yevmenkin
0986ab12e4 Update Bluetooth code.
Reviewed by: M. Warner Losh <imp@bsdimp.com>; John Hay <jhay@freebsd.org>
Approved by: M. Warner Losh <imp@bsdimp.com> (mentor)
2003-10-12 22:04:24 +00:00
Hidetoshi Shimokawa
c4778b5d1c MFp4: Change struct fw_xfer to reduce memory copy in fwmem_*() functions.
And many changes.

* all
	- Major change of struct fw_xfer.
		o {send,recv}.buf is splitted into hdr and payload.
		o Remove unnecessary fields.
		o spd is moved under send and recv.
	- Remove unnecessary 'volatile' keyword.
	- Add definition of rtcode and extcode.

* firewire.c
	- Ignore FWDEVINVAL devices in fw_noderesolve_nodeid().
	- Check the existance of the bind before call STAILQ_REMOVE().
	- Fix bug in the fw_bindadd().
	- Change element of struct fw_bind for simplicity.
	- Check rtcode of response packet.
	- Reduce split transaction timeout to 200 msec.
		(100msec is the default value in the spec.)
	- Set watchdog timer cycle to 10 Hz.
	- Set xfer->tv just before calling fw_get_tlabel().

* fwohci.c
	- Simplifies fwohci_get_plen().

* sbp.c
	- Fix byte order of multibyte scsi_status informations.
	- Split sbp.c and sbp.h.
	- Unit number is not necessary for FIFO¤ address.
	- Reduce LOGIN_DELAY and SCAN_DELAY to 1 sec.
	- Add some constants defineded in SBP-2 spec.

* fwmem.c
	- Introduce fwmem_strategy() and reduce memory copy.
2003-10-02 04:06:56 +00:00
Max Khon
c4f02a891f - Support for multibyte charsets in LIBICONV.
- CD9660_ICONV, NTFS_ICONV and MSDOSFS_ICONV kernel options
(with corresponding modules).
- kiconv(3) for loadable charset conversion tables support.

Submitted by:	Ryuichiro Imura <imura@ryu16.org>
2003-09-26 20:26:25 +00:00
Sam Leffler
3fe1b4f5df update to reflect PFIL_HOOKS api changes
Supported by:	FreeBSD Foundation
2003-09-23 17:55:04 +00:00
Sam Leffler
134ea22494 o update PFIL_HOOKS support to current API used by netbsd
o revamp IPv4+IPv6+bridge usage to match API changes
o remove pfil_head instances from protosw entries (no longer used)
o add locking
o bump FreeBSD version for 3rd party modules

Heavy lifting by:	"Max Laier" <max@love2party.net>
Supported by:		FreeBSD Foundation
Obtained from:		NetBSD (bits of pfil.h and pfil.c)
2003-09-23 17:54:04 +00:00
Marcel Moolenaar
8225548ebf Only build the ebus driver on sparc64. It includes a header directly
from the sparc64 subtree, which breaks building non-sparc64 platforms
in the event the sparc64 subtree does not exist.
The problem is specific to the module, because non-module builds are
affected by the presence or absence of "device ebus" in the kernel
configuration.

PR: kern/56869
2003-09-17 03:00:08 +00:00
Marcel Moolenaar
991e61c934 Sort: build uart_bus_pccard.c before uart_bus_pci.c. 2003-09-15 04:53:11 +00:00
Takanori Watanabe
a9f6e997b5 Add uart pccard bus attachment,based on sio_pccard.c .
Wrote at: Hakone.
Powered by: Warner Losh's scotch whisky.
Tested by: nork
2003-09-14 16:21:06 +00:00
Bill Paul
9bac70b851 Add a PHY driver to support the built-in gigE PHY in the 8169S/8110S
ethernet chips. This driver is pretty simple, however it contains
special DSP initialization code which is needed in order to get
the chip to negotiate a gigE link. (This special initialization
may not be needed in subsequent chip revs.) Also:

- Fix typo in if_rlreg.h (RL_GMEDIASTAT_1000MPS -> RL_GMEDIASTAT_1000MBPS)

- Deal with shared interrupts in re_intr(): if interface isn't up,
  return.

- Fix another bug in re_gmii_writereg() (properly apply data field mask)

- Allow PHY driver to read the RL_GMEDIASTAT register via the
  re_gmii_readreg() register (this is register needed to determine
  real time link/media status).
2003-09-11 03:53:46 +00:00
Bill Paul
b9f78d2b4a Add a device driver for the Broadcom BCM4401 ethernet controller,
written by Stuart Walsh and Duncan Barclay (with some kibbitzing by
me). I'm checking it in on Stuart's behalf.

The BCM4401 is built into several x86 laptop and desktop systems. For the
moment, I have only enabled it in the x86 kernel config because although
it's a PCI device, I haven't heard of any standalone NICs that use it. If
somebody knows of one, we can easily add it to the other arches.

This driver uses register/structure data gleaned from the Linux
driver released by Broadcom, but does not contain any of the code
from the Linux driver itself. It uses busdma.
2003-09-09 18:17:23 +00:00
Eric Anholt
a1810e1513 Hook the SiS DRM up to the build
Sponsored by:	LinuxFund
2003-09-09 00:29:02 +00:00
Bill Paul
3ad525ef3c Fix PATH: directive in sys/modules/re/Makefile, and add the re(4) driver to
devd.conf.

Pointed out by: Larry Rosenman
2003-09-08 03:24:29 +00:00
Bill Paul
a94100fa9b Take the support for the 8139C+/8169/8169S/8110S chips out of the
rl(4) driver and put it in a new re(4) driver. The re(4) driver shares
the if_rlreg.h file with rl(4) but is a separate module. (Ultimately
I may change this. For now, it's convenient.)

rl(4) has been modified so that it will never attach to an 8139C+
chip, leaving it to re(4) instead. Only re(4) has the PCI IDs to
match the 8169/8169S/8110S gigE chips. if_re.c contains the same
basic code that was originally bolted onto if_rl.c, with the
following updates:

- Added support for jumbo frames. Currently, there seems to be
  a limit of approximately 6200 bytes for jumbo frames on transmit.
  (This was determined via experimentation.) The 8169S/8110S chips
  apparently are limited to 7.5K frames on transmit. This may require
  some more work, though the framework to handle jumbo frames on RX
  is in place: the re_rxeof() routine will gather up frames than span
  multiple 2K clusters into a single mbuf list.

- Fixed bug in re_txeof(): if we reap some of the TX buffers,
  but there are still some pending, re-arm the timer before exiting
  re_txeof() so that another timeout interrupt will be generated, just
  in case re_start() doesn't do it for us.

- Handle the 'link state changed' interrupt

- Fix a detach bug. If re(4) is loaded as a module, and you do
  tcpdump -i re0, then you do 'kldunload if_re,' the system will
  panic after a few seconds. This happens because ether_ifdetach()
  ends up calling the BPF detach code, which notices the interface
  is in promiscuous mode and tries to switch promisc mode off while
  detaching the BPF listner. This ultimately results in a call
  to re_ioctl() (due to SIOCSIFFLAGS), which in turn calls re_init()
  to handle the IFF_PROMISC flag change. Unfortunately, calling re_init()
  here turns the chip back on and restarts the 1-second timeout loop
  that drives re_tick(). By the time the timeout fires, if_re.ko
  has been unloaded, which results in a call to invalid code and
  blows up the system.

  To fix this, I cleared the IFF_UP flag before calling ether_ifdetach(),
  which stops the ioctl routine from trying to reset the chip.

- Modified comments in re_rxeof() relating to the difference in
  RX descriptor status bit layout between the 8139C+ and the gigE
  chips. The layout is different because the frame length field
  was expanded from 12 bits to 13, and they got rid of one of the
  status bits to make room.

- Add diagnostic code (re_diag()) to test for the case where a user
  has installed a broken 32-bit 8169 PCI NIC in a 64-bit slot. Some
  NICs have the REQ64# and ACK64# lines connected even though the
  board is 32-bit only (in this case, they should be pulled high).
  This fools the chip into doing 64-bit DMA transfers even though
  there is no 64-bit data path. To detect this, re_diag() puts the
  chip into digital loopback mode and sets the receiver to promiscuous
  mode, then initiates a single 64-byte packet transmission. The
  frame is echoed back to the host, and if the frame contents are
  intact, we know DMA is working correctly, otherwise we complain
  loudly on the console and abort the device attach. (At the moment,
  I don't know of any way to work around the problem other than
  physically modifying the board, so until/unless I can think of a
  software workaround, this will have do to.)

- Created re(4) man page

- Modified rlphy.c to allow re(4) to attach as well as rl(4).

Note that this code works for the sample 8169/Marvell 88E1000 NIC
that I have, but probably won't work for the 8169S/8110S chips.
RealTek has sent me some sample NICs, but they haven't arrived yet.
I will probably need to add an rlgphy driver to handle the on-board
PHY in the 8169S/8110S (it needs special DSP initialization).
2003-09-08 02:11:25 +00:00
Tim J. Robbins
d14e51c95c Add support for the Coda 6.x venus<->kernel interface. This extends
FIDs to be 128-bits wide and adds support for realms.

Add a new CODA_COMPAT_5 option, which requests support for the old
Coda 5.x interface instead of the new one.

Create a new coda5.ko module that supports the 5.x interface, and make
the existing coda.ko module use the new 6.x interface. These modules
cannot both be loaded at the same time.

Obtained from:	Jan Harkes & the coda-6.0.2 distribution,
		NetBSD (drochner) (CODA_COMPAT_5 option).
2003-09-07 07:43:10 +00:00
Marcel Moolenaar
763d340b43 Now that PC98 has it's own MD file, use uart_cpu_${MACHINE}.c and
not uart_cpu_${MACHINE_ARCH}.c.
2003-09-07 06:50:08 +00:00
Warner Losh
080684ba71 add i8251 2003-09-07 05:00:32 +00:00
Marcel Moolenaar
2bec1c8919 Hook-up the uart(4) driver to the build. For a detailed description
of what uart(4) is and/or is not see the initial commit log of one
of the files in sys/dev/uart (or see share/man/man4/uart.4).

Note that currently pc98 shares the MD file with i386. This needs
to change when pc98 support is fleshed-out to properly support the
various UARTs. A good example is sparc64 in this respect.

We build uart(4) as a module on all platforms. This may break
the ppc port. That depends on whether they do actually build
modules.

To use uart(4) on alpha, one must use the NO_SIO option.
2003-09-06 23:23:26 +00:00
Søren Schmidt
d7d54aa109 Add pst as a module 2003-08-30 08:01:05 +00:00
Nate Lawson
ad1fdf57d2 Use the ACPICA AcpiEnterSleepStateS4bios instead of rolling our own. This
change also disables interrupts around non-S4 suspends whereas before we
did not do this.  Our version of AcpiEnterSleepStateS4bios was almost
identical to the ACPICA version.
2003-08-29 04:02:19 +00:00
Warner Losh
53e655ce37 Check in the known good version of the wi driver, with prism/symbol
support stripped out and minimally renamed to owi.  This driver
attaches to lucent cards only.  This is designed to aid in the testing
of fixes to the wi driver for lucent cards.  It is supported only as a
module (you cannot compile it into your kernel).  You cannot have the
wi driver in your kernel (or loaded as a moudle) to use the owi
module.

I've not connected it to build, as this module is currently for
debugging purposes.  This is for developers only at the present time.
If we can't get lucent support fixed by 5.2 code freeze, then we'll
re-evaulate this support level.  Please use this to fix the lucent
support in dev/wi.  This will be removed from the system when lucent
support has been fixed in dev/wi.

Note to developers: Do not connect this to the build, make it possible
to build into the kernel or otherwise 'integrate' this into system
without checking with me first.  This is for debugging purposes only.

If this doesn't work for you, I don't want to hear about it unless you
are fixing the wi driver :-)
2003-08-24 05:42:49 +00:00
Matthew N. Dodd
34345c0870 AGP GART driver for NVIDIA nForce/nForce2 chipsets. 2003-08-23 18:00:31 +00:00
Robert Watson
782f725560 Hook up mac_stub to the modules Makefile.
Hook up mac_stub in files and options.
Reference mac_stub in NOTES.
2003-08-21 16:48:39 +00:00
Alexander Langer
30e27d9623 Add a overhaul of the soundchip initialization for the MSP34xx chipsets
found only many tv-cards.

We currently use more ore less evil hacks (slow_msp_audio sysctl) to
configure the various variants of these chips in order to have
stereo autodetection work.  Nevertheless, this doesn't always work
even though it _should_, according to the specs.
This is, for example, the case for some popular Hauppauge models sold
sold in Germany.

However, the Linux driver always worked for me and others.  Looking at
the sourcecode you will find that the linux-driver uses a very much
enhanced approach to program the various msp34xx chipset variants,
which is also found in the specs for these chips.

This is a port of the Linux MSP34xx code, written by Gerd Knorr
<kraxel@bytesex.org>, who agreed to re-release his code under a
BSD license for this port.

A new config option "BKTR_NEW_MSP34XX_DRIVER" is added, which is required
to enable the new driver.  Otherwise the old code is used.

The msp34xx.c file is diff-reduced to the linux-driver to make later
modifications easier, thus it doesn't follow style(9) in most cases.

Approved by:	roger (committing this, no time to test/review),
		keichii (code review)
2003-08-12 09:45:34 +00:00
Hartmut Brandt
ee4080d424 Add ng_atmpif: a HARP physical interface emulation. This allows one
to run the HARP ATM stack without real hardware.

Submitted by:	Vincent Jardin <vjardin@wanadoo.fr>
2003-08-11 08:40:02 +00:00
David E. O'Brien
96e934df56 Re-enable pcfclock in the build. 2003-08-10 01:35:36 +00:00
Hartmut Brandt
6757bf1b26 When compiling the module with INVARIANTS we also need INVARIANT_SUPPORT. 2003-08-06 16:01:32 +00:00
Ruslan Ermilov
889109df01 There's already the elink.ko module available, don't embed it here.
Reviewed by:	markm
2003-08-02 18:46:02 +00:00
Nate Lawson
dda5f182ae Fix the new DA_OLD_QUIRKS option for normal and module compiles.
Pointed out by: 	bde
2003-07-29 18:08:16 +00:00
Peter Wemm
a35b33869d Initiate de-orbit burn for fpu-less operation. 386+387 is still
theoretically supportable, but you'd really be happier with FreeBSD 2.1.8
on it.
2003-07-22 08:11:17 +00:00
Sam Leffler
35ba56eca3 hook safe driver to the build 2003-07-21 21:48:45 +00:00
Sam Leffler
b55b9b34ba SafeNet crypto driver
Sponsored by:	Global Technology Associates, Inc.
MFC after:	1 day
2003-07-21 21:47:47 +00:00
Hartmut Brandt
58aa55efa5 This is a pseudo physical interface for the HARP ATM stack. When loaded
it attaches to all existing NATM network interfaces in the system
and creates a HARP physical interface for each of them. This allows
us to use the same set of ATM drivers for all ATM stuff. It is
possible to use the same interface for HARP, NATM and netgraph at the
same time.
2003-07-21 13:56:22 +00:00
John-Mark Gurney
45dd937507 make usb bus_dma aware.
Reviewed by:	joe among others
2003-07-15 22:42:37 +00:00
Nate Lawson
8a7e9ab4b7 Fix the ACPI_DEBUG build for the non-module case. Move the #define into
acfreebsd.h and remove it from the Makefile.  Now ACPI_DEBUG implies
ACPI_DISASSEMBLER.

Noticed by:	marcel
2003-07-15 19:18:41 +00:00
Hartmut Brandt
8dd4275c36 This is a driver for IDT77252 based ATM interfaces. It has been tested
with a ProATM-155 and an IDT evaluation board and should also work
with a ProATM-25 (it seems to work at least, I cannot really measure
what the card emits). The driver has been tested on i386 and sparc64,
but should work an other archs also. It supports UBR, CBR, ABR and VBR;
AAL0, AAL5 and AALraw. As an additional feature VCI/VPI 0/0 can be
opened for receiving in AALraw mode and receives all cells not claimed
by other open VCs (even cells with invalid GFC, VPI and VCI fields and
OAM cells).

Thanks to Christian Bucari from ProSum for lending two cards and answering
my questions.
2003-07-15 11:57:24 +00:00
Hartmut Brandt
7e9024cdd9 Add a facility for devices, specifically network interfaces, that require
large to huge amounts of small or medium sized receive buffers. The problem
with these situations is that they eat up the available DMA address space
very quickly when using mbufs or even mbuf clusters. Additionally this
facility provides a direct mapping between 32-bit integers and these buffers.
This is needed for devices originally designed for 32-bit systems. Ususally
the virtual address of the buffer is used as a handle to find the buffer as
soon as it is returned by the card. This does not work for 64-bit machines
and hence this mapping is needed.
2003-07-15 08:59:38 +00:00
Nate Lawson
06bc618c85 Fix build with ACPI_DEBUG option.
Reported by:	Mark Santcroos <marks@ripe.net>, des+tinderbox
2003-07-14 17:19:45 +00:00
Bill Paul
85a94674d0 tdkphy.c is missing from this module's Makefile. Add it. 2003-07-10 05:12:10 +00:00
John Baldwin
6c525ee43c Add an ACPI to ISA psuedo bridge driver. It attaches an isab(4) device to
ACPI nodes with the plug and play ID's defined for a "Generic ISA Bus
Device" as defined in section 10.7 of the ACPI 2.0 specification.  This
gives machines like the Libretto that contain a fake ISA bus that is not
connected via a PCI-ISA bridge an ISA bus for ISA devices to attach to.

Tested by:	markm
2003-07-08 18:59:32 +00:00
John-Mark Gurney
e4bfcbdb32 add the mbr_enc file so that we can load the module on sparc64. 2003-07-05 08:11:43 +00:00
Sam Leffler
3d238d9e98 nitpicking
Submitted by:	Ruslan Ermilov <ru@FreeBSD.org>
2003-06-30 05:25:36 +00:00
Ruslan Ermilov
cf8603ce44 Attach the amd(4) module to the i386 and pc98 builds only;
untested on other platforms.

Not objected to by:	scottl
2003-06-28 08:01:27 +00:00
Sam Leffler
0ba9760820 switch to new 802.11 support 2003-06-28 06:19:01 +00:00
Sam Leffler
81e151e45f hookup ath and ath_hal to the build 2003-06-28 06:18:37 +00:00
Scott Long
c31c852372 Hook umct up to the module tree. 2003-06-28 05:46:16 +00:00
Scott Long
871f5c8c2d Add 'umct', a driver for MCT Corp. and Belkin F5U109 USB-Serial adapters.
This is based on the ubsa driver by Alexander Kabaev along with documentation
gleaned from the Linux mct_u232 driver.  I've had this driver sitting in my
tree for almost 6 months, and several others have found it useful.
2003-06-28 05:45:55 +00:00
Ruslan Ermilov
61340e72c4 Attach the "null" module to the LINT build.
Reviewed by:	markm
2003-06-26 08:06:31 +00:00
Sam Leffler
b52f49a9a0 module for atheros hal 2003-06-25 14:43:50 +00:00
Hartmut Brandt
cfca62bfac This is a netgraph node to access ATM interfaces. It works with the
hatm(4) and fatm(4) drivers, en(4) will follow soon.
2003-06-25 13:20:19 +00:00
Ian Dowse
7a07b896c5 The ext2fs module needs a machine-dependent bitops.h file, so only
build it on the i386 and alpha architectures, where this has been
set up (there is also a sparc64-bitops.h in sys/gnu/ext2fs, but it
appears to be broken and it is not linked up).

This should unbreak the sparc64 LINT build.
2003-06-24 13:35:46 +00:00
Ian Dowse
ce3ae5c7e3 Include the ufs module if ALL_MODULES is defined so that it gets
built by LINT. Also override a number of knobs for enabling and
disabling various modules in the ALL_MODULES case to further increase
LINT's module coverage.

Submitted by:	ru
2003-06-23 22:01:01 +00:00
Matthew N. Dodd
26a9ce3e36 Hook up scd(4) to the build.
Noticed by:	 ru
2003-06-23 20:52:03 +00:00
Ian Dowse
620d309e35 Add a few missing opt_ files to make this module compile again. 2003-06-23 19:41:00 +00:00
Sam Leffler
ae8afbf2dd module for Atheros 802.11 driver 2003-06-23 17:02:43 +00:00
Hartmut Brandt
fb24f088ae This is a driver for Fore PCA200E cards that uses busdma and works on
little endian and big endian and with 32 and 64 bit pointers. It already
has the hooks to be used for HARP, NATM and ngATM.
2003-06-23 14:46:12 +00:00
Poul-Henning Kamp
22db1e9ff5 Add "GEOM_FOX", a class which detects and selects between multiple
redundant paths to the same device.

This class reacts to a label in the first sector of the device,
which is created the following way:

        #    "0123456789abcdef012345..."
        #    "<----magic-----><-id-...>
        echo "GEOM::FOX       someid" | dd of=/dev/da0 conv=sync

NB: Since the fact that multiple disk devices are in fact the same
    device is not known to GEOM, the geom taste/spoil process cannot
    fully catch all corner cases and this module can therefore be
    confused if you do the right wrong things.

NB: The disk level drivers need to do the right thing for this to
    be useful, and that is not by definition currently the case.
2003-06-18 09:29:28 +00:00
Hartmut Brandt
c594298bee This is a driver for Fore/Marconi HE155 and HE622 ATM cards. It is full
busdma and has extensively been tested on i386 and sparc64.
2003-06-17 16:12:50 +00:00
Hartmut Brandt
57112b8d4a Repo-copy of sys/pci/if_en_pci.c to the rest of the midway driver (sys/dev/en)
so that all of the driver sources are in one place. Adjust the configuration
files and the module build.
2003-06-16 15:25:51 +00:00
Hartmut Brandt
7d361237dc Fix the breakage introduced by rev. 1.43 of sys/dev/midway.c (don't commit
on friday 13th and without making a universe). This adds struct and
constant definitions for ATM traffic parameters and re-enables the
build of the midway driver.

Tested by: make universe
2003-06-16 13:52:27 +00:00
Yoshihiro Takahashi
97caa42aea Include "../Makefile.inc" 2003-06-15 04:27:22 +00:00
Yoshihiro Takahashi
a252a7bf01 Most power management devices don't exist on pc98. 2003-06-15 04:24:28 +00:00
Warner Losh
e45d184c46 The en module has been broken for the last 40 hours. Disconnect it
from the tree until it is fixed.  Since it is an atm driver, it isn't
commonly used so this will not negatively impact too many people.
harti can reconnect it when he resurfaces and corrects the en module
problems.  This should allow snapshots to start succeeding again.

Reported by: lots of people
2003-06-15 04:15:29 +00:00
John-Mark Gurney
35ae09bc0e Fix the KMOD for the lpbb device. 2003-06-14 20:43:33 +00:00
Nicolas Souchu
e827419577 amdpm was omitted from the build of i2c controllers. Fixed. 2003-06-14 20:32:46 +00:00
Nicolas Souchu
49336098dd Add i2c to the list of modules to build. 2003-06-14 20:21:35 +00:00
Greg Lehey
887cae2b70 Remove these files. They have successors in tools/debugscripts. 2003-06-12 23:30:57 +00:00
Hartmut Brandt
591f4054cb This is a driver for the physical layer chips used in ATM interfaces.
It currently supports the PMC Sierra Lite, Ultra and 622 chips and
the IDT 77105. The driver handles media options and state in a consistent
manner for ATM drivers. The next commit to the midway driver will make
it use utopia.
2003-06-12 14:28:32 +00:00
Poul-Henning Kamp
87eca0f99c Add new geom_ccd module 2003-06-09 21:49:54 +00:00
Poul-Henning Kamp
68bf8b56da remove old CCD module 2003-06-09 21:48:12 +00:00
Gordon Tetlow
03d26d7e42 Add a geom_vol_ffs module and hook up to the build. 2003-06-03 20:32:13 +00:00
Dag-Erling Smørgrav
f834a1168c Add (but do not connect) a half-finished driver for Aureal Vortex cards.
The mixer works, pcm support is half done.
2003-06-01 11:58:46 +00:00
Poul-Henning Kamp
5d9bef6473 Add GEOM module compilation shims. 2003-05-31 18:36:41 +00:00
Yoshihiro Takahashi
3e4e484918 Move the ips driver from ${MACHINE_ARCH} == "i386" to ${MACHINE} == "i386".
Approved by:	re (scottl)
2003-05-13 11:26:08 +00:00
Scott Long
3bd9d6f570 Hook up the ips module 2003-05-11 06:40:09 +00:00
Scott Long
2aedd662d8 Add the 'ips' driver for the IBM (now Adaptec) ServeRAID controller
series.  This driver was generously developed and released by David
Jeffreys and Adaptec.  I've updated it to work with 5.x and fixed a
few bugs.

MFC After:	1 week
2003-05-11 06:36:49 +00:00
Julian Elischer
f2bb1cae36 Part one of undating the bluetooth code to the newest version
Submitted by:   Maksim Yevmenkin <m_evmenkin@yahoo.com>
Approved by: re@
2003-05-10 21:44:42 +00:00
Shunsuke Akiyama
11e04b0528 Add RealTek RTL8150 USB to fast Ethernet controller driver.
This driver now supports the Melco LUA-KTX and the GREEN HOUSE
GH-USB100B.

Reviewed by:	imp
MFC after:	2 weeks
2003-05-03 10:16:56 +00:00
Nate Lawson
51773ddf47 Support functions for the new ACPI import.
* AcpiOsDerivePciId(): finds a bus number, given the slot/func and the
    acpi parse tree.
  * AcpiOsPredefinedOverride(): use the sysctl hw.acpi.os_name to
    override the value for _OS.

Ideas from:	takawata, jhb
Reviewed by:	takawata, marcel
Tested on:	i386, ia64
2003-04-29 18:50:34 +00:00
Hartmut Brandt
33cfde03bc Convert the midway driver to use busdma. Except for this conversion the
following changes have been done:

- stylify. The original code was too hard to read.
- get rid of a number of compilation options (Adaptec-only, Eni-only, no-DMA).
- more debugging features.
- locking. This is not correct yet in the absence of interface layer locking,
  but is correct enough to not to cause lock order reversals.
- remove RAW mode. There are no users of this in the tree and I doubt that
  there are any.
- remove NetBSD compatibility code. There was no way to keep NetBSD non-busdma
  and FreeBSD busdma code together.
- if_en now buildable as a module.

This has been actively tested on sparc64 and i386 with ENI server and
client cards and an Adaptec card (thanks to kjc).

Reviewed by:	mdodd, arr
2003-04-25 16:14:03 +00:00
Bill Paul
87b4a25958 Add device driver support for the ASIX Electronics AX88172 USB 2.0
ethernet controller. The driver has been tested with the LinkSys
USB200M adapter. I know for a fact that there are other devices out
there with this chip but don't have all the USB vendor/device IDs.

Note: I'm not sure if this will force the driver to end up in the
install kernel image or not. Special magic needs to be done to exclude
it to keep the boot floppies from bloating again, someone please
advise.
2003-04-20 19:05:33 +00:00
Hidetoshi Shimokawa
77ee030b5f MFp4(simokawa_firewire):
Many internal structure changes for the FireWire driver.

- Compute CRC in CROM parsing.
- Add support for configuration ROM build.
- Simplify dummy buffer handling.
- busdma conversion
- Use swi_taskqueue_giant for -current.  Mark the interrupt routine as MPSAFE.
- AR buffer handling.
	Don't reallocate AR buffer but just recycle it.
	Don't malloc and copy per packet in fwohci_arcv().
	Pass packet to fw_rcv() using iovec.
	Application must prepare receiving buffer in advance.
- Change fw_bind API so that application should pre-allocate xfer structure.
- Add fw_xfer_unload() for recycling struct fw_xfer.
- Add post_busreset hook
- Remove unused 'sub' and 'act_type' in struct fw_xfer.
- Remove npacket from struct fw_bulkxfer.
- Don't call back handlers in fwochi_arcv() if the packet has
	not drained in AT queue
- Make firewire works on big endian platform.
- Use native endian for packet header and remove unnecessary ntohX/htonX.
- Remove FWXFERQ_PACKET mode.  We don't use it anymore.
- Remove unnecessary restriction of FWSTMAXCHUNK.
- Don't set root node for phy config packet if the root node is
	not cycle master capable but set myself for root node.
	We should be the root node after next bus reset.

	Spotted by: Yoshihiro Tabira <tabira@scd.mei.co.jp>
- Improve self id handling

Tested on: i386, sparc64 and i386 with forced bounce buffer
2003-04-17 03:38:03 +00:00
Bernd Walter
ca3acad1d7 add EHCI (USB 2.0) controller support.
Approved by:	joe
		gallatin (mentor)
Obtained from:  NetBSD
2003-04-14 14:04:08 +00:00
Max Khon
7d0de413cb Driver for Granch SBNI16 SHDSL modem
Submitted by:	Denis I. Timofeev <timofeev@granch.ru>
MFC after:	1 week
2003-04-13 06:27:13 +00:00
Yoshihiro Takahashi
ba32bfe24e The dpt, ex and idt modules are for i386 only. 2003-04-13 01:32:03 +00:00
Matthew N. Dodd
efc5f672bd - Add PCI support (Adaptec AHA-2920/A,Future Domain TMC-18XX/3260).
- Reduce duplicated code.

PR:             50427
Submitted by:   Bob Bishop <rb@gid.co.uk>
2003-04-07 10:13:25 +00:00
Matthew N. Dodd
e3a2085326 opt_geom.h is no longer required for this module. 2003-03-29 16:13:11 +00:00
Matthew N. Dodd
991aa7bf9a Add 'idt' driver to module build. 2003-03-29 15:56:13 +00:00
Matthew N. Dodd
56376071e3 Add module infrastructure for 'dpt' driver. 2003-03-29 15:47:13 +00:00
Matthew N. Dodd
79ac92f83c Add module infrastructure for 'if_ex'. 2003-03-29 15:41:44 +00:00
Matthew N. Dodd
81d9009a65 Add module infrastructure for 'vpd' and 'smbios' and move 'smbios'
to new home.
2003-03-29 15:20:45 +00:00
Matthew N. Dodd
187e120cbe Add module infrastructure for elink. 2003-03-29 13:42:20 +00:00
Matthew N. Dodd
dd4cb1b8b8 Add module infrastructure for if_ie. 2003-03-29 13:40:41 +00:00
Matthew N. Dodd
be8e35bebd 'speaker' not 'atspeaker' 2003-03-29 10:01:03 +00:00
Matthew N. Dodd
a71a307383 Retire 'atspeaker' and 'pcspeaker'. We'll use 'speaker' which
is the same as the config device directive.

Reminded by:	 Takahashi Yoshihiro <nyan@jp.FreeBSD.org>
2003-03-29 09:59:49 +00:00
Matthew N. Dodd
94c35e0af2 Merge PC98 support. 2003-03-25 05:19:18 +00:00
Matthew N. Dodd
0d98179d63 I seem to have forgotten this. Sorry. 2003-03-24 22:25:08 +00:00
Matthew N. Dodd
b7b5ae3edb Use repo-copied files in sys/i386/bios. 2003-03-24 19:14:46 +00:00
Matthew N. Dodd
2152ccaa64 Don't build if_iso88025subr.c into the oltr module. 2003-03-15 23:24:17 +00:00
Ruslan Ermilov
99bca5069e Simplify the assignment statement. 2003-03-12 14:32:46 +00:00
Sam Leffler
98822e3945 fix module building; drivers now require opt_{ubsec,hifn}.h 2003-03-11 23:20:43 +00:00
Sam Leffler
ac7e2c0515 FIPS 140-2 rng data tester for h/w crypto devices. This driver periodically
monitors the entropy data harvested by crypto drivers to verify it complies
with FIPS 140-2.  If data fails any test then the driver discards it and
commences continuous testing of harvested data until it is deemed ok.
Results are collected in a statistics block and, optionally, reported on
the console.  In normal use the overhead associated with this driver is
not noticeable.

Note that drivers must (currently) be compiled specially to enable use.

Obtained from:	original code by Jason L. Wright
2003-03-11 19:26:16 +00:00
Shunsuke Akiyama
20280807ca Fix device freeze to reduce output packet size.
And make this value configurable by kernel config or sysctl.
2003-03-09 11:50:27 +00:00
Yoshihiro Takahashi
484be8eac1 Build the drm module also on pc98. 2003-03-09 10:12:58 +00:00
Eric Anholt
43e2d1e384 Update the DRM to latest from DRI CVS. This is approximately the version
included in XFree86 4.3, but includes some fixes.  Notable changes include
Radeon 8500-9100 support, PCI Radeon/Rage 128 support, transform & lighting
support for Radeons, and vblank syncing support for r128, radeon, and mga.
The gamma driver was removed due to lack of any users.
2003-03-09 02:08:30 +00:00
Jonathan Lemon
921f8bb982 Fix module build by adding options to Makefile. 2003-03-08 21:54:32 +00:00
Peter Wemm
3c6b084e96 Finish driving a stake through the heart of netns and the associated
ifdefs scattered around the place - its dead Jim!

The SMB stuff had stolen AF_NS, make it official.
2003-03-05 19:24:24 +00:00
David Schultz
9c62b3ee7c Make TTYHOG tunable.
Reviewed by:	mike (mentor)
2003-03-05 08:16:29 +00:00
Robert Watson
03d031626d A cute yet small MAC policy that provides a simple ACL mechanism to
permit users and groups to bind ports for TCP or UDP, and is intended
to be combined with the recently committed support for
net.inet.ip.portrange.reservedhigh.  The policy is twiddled using
sysctl(8).  To use this module, you will need to compile in MAC
support, and probably set reservedhigh to 0, then twiddle
security.mac.portacl.rules to set things as desired.  This policy
module only restricts ports explicitly bound using bind(), not
implicitly bound ports where the port number is selected by the
IP stack.  It appears to work properly in my local configuration,
but needs more broad testing.

A sample policy might be:

  # sysctl security.mac.portacl.rules="uid:425:tcp:80,uid:425:tcp:79"

This permits uid 425 to bind TCP sockets to ports 79 and 80.  Currently
no distinction is made for incoming vs. outgoing ports with TCP,
although that would probably be easy to add.

Obtained from:	TrustedBSD Project
Sponsored by:	DARPA, Network Associates Laboratories
2003-03-02 23:01:42 +00:00
Mark Murray
c1f4590524 This is not going to win prizes for the most useful module ever,
but it is useful to me for some testing and warns-fixing.
2003-02-27 18:08:44 +00:00
Ruslan Ermilov
e4de92ce2b Hook up the if_my module to the build. 2003-02-27 14:49:56 +00:00
Tim J. Robbins
ef9e45dd01 Build the ncp and nwfs modules again, but only on i386 for now. 2003-02-27 11:31:08 +00:00
Scott Long
3f9be55c27 Revert the use of -g that leaked in. 2003-02-26 06:56:46 +00:00
Scott Long
7874f606d5 Introduce a new taskqueue that runs completely free of Giant, and in
turns runs its tasks free of Giant too.  It is intended that as drivers
become locked down, they will move out of the old, Giant-bound taskqueue
and into this new one.  The old taskqueue has been renamed to
taskqueue_swi_giant, and the new one keeps the name taskqueue_swi.
2003-02-26 03:15:42 +00:00
Marcel Moolenaar
907cf80fbf Remove support for running in SimOS. The support has rotted over
time and there's no indication that it will improve anytime soon.
By removing support for SimOS it is possible to build LINT on
Alpha, which is considered more important at the moment.

Not objected to on: alpha@
2003-02-25 00:42:40 +00:00
Eric Anholt
05d1e23aa7 Split the arch-specific AGP files into the appropriate files.* and do the same
for the agp module, and add agp to the list of modules to compile for alpha.
Add an alpha_mb() to agp_flush_cache for alpha -- it's not correct but may
improve the situation, and it's what linux and NetBSD do.
2003-02-14 06:33:52 +00:00
Peter Wemm
f801952a0b We only provide agp drivers for the intel chipsets, move the agp
subdir to the i386-only section.
2003-02-13 21:13:10 +00:00
Hidetoshi Shimokawa
85c8ffea1d Remove unnecessary EXPORT_SYMS. 2003-02-13 13:42:19 +00:00
Yoshihiro Takahashi
f9df75c095 pci_if.h is not needed. 2003-02-07 15:05:37 +00:00
Yoshihiro Takahashi
3febcc57ec - Clean up ISA DMA supports.
- Rename all sndbuf_isadma* functions to sndbuf_dma* and move them into
  sys/dev/sound/isa/sndbuf_dma.c.

No response from:	sound
2003-02-07 14:05:34 +00:00
Yoshihiro Takahashi
6780ab5432 isa_if.h is not needed.
No response from:	sound
2003-02-07 13:56:33 +00:00
Doug Ambrisko
233896e9da Take the rc4 code out of ng_mppc module so we don't fail to load when
we have the rc4 code already in the kernel (via wlan stuff or awi).
Add a dependency on the rc4 module so if it doesn't exist then load it.

Reviewed by:	archie
2003-02-05 19:11:11 +00:00
Hajimu UMEMOTO
ca26842e2a Add IPv6 support for Linuxlator.
Reviewed by:	dwmalone
MFC after:	10 days
2003-02-03 17:43:20 +00:00
Yoshihiro Takahashi
83536948ae Add CanBe power management controller support.
Submitted by:	KIYOHARA Takashi <kiyohara@kk.iij4u.or.jp>
2003-02-03 14:46:26 +00:00
Orion Hodson
f9eb140935 Add ac97_patch.[ch] that provide space for ac97 codec specific patches. 2003-01-25 16:54:05 +00:00
Max Khon
6cdcc15976 - add support for IPX (tested with mount -t nwfs and mars_nwe),
IP fast forwarding, SIOCGIFADDR, setting hardware address (not currently
enabled in cm driver), multicasts (experimental)
- add ARC_MAX_DATA, use IF_HANDOFF, remove arc_sprintf() and some unused
variables
- if_simloop logic is made more similar to ethernet
- drop not ours packets early (if we are not in promiscous mode)

Submitted by:	mark tinguely (partially)
2003-01-24 01:32:20 +00:00
Justin T. Gibbs
295ebaf851 Update GENSRCS and aicasm options correctly depending on whether register
pretty printing is enabled

Add a dependency on the source files for aicasm so that it will be rebuilt
if out of date.

Simplify.
2003-01-22 21:56:54 +00:00
Jake Burkholder
4875819c6e Run kldxref on sparc64, it works now. 2003-01-21 05:52:48 +00:00
David E. O'Brien
2d3ce7133a Remove miidevs.h and generate it from miidevs at compile time.
The devlist2h.awk tool to do this has been repocopied to sys/tools/.
2003-01-19 02:59:34 +00:00
Matthew N. Dodd
7534ac7ab7 A driver for the System Management Application Program
Interface (SMAPI) BIOS, which is present on some IBM
Thinkpad models (560, 600, 770 to name a few.)

The SMAPI BIOS provides access to System Information,
System Configuration, and Power Management.
2003-01-17 08:10:18 +00:00
Sam Leffler
a7c02787d0 remove wi-specific host ap code; the wi driver now depends on the
wlan module for 802.11 core support
2003-01-15 20:13:30 +00:00
Sam Leffler
0ac19bd5dc hookup wlan and rcv4 modules to the build
Reviewed by:	imp
2003-01-15 20:06:38 +00:00
Sam Leffler
241ab3c6ef add module for 802.11 link layer code
Reviewed by:	imp
2003-01-15 20:05:52 +00:00
Sam Leffler
50b25cd7d2 make rc4 crypto support a module so other modules can depend on it
Submitted by:	imp
Reviewed by:	imp
2003-01-15 19:55:17 +00:00
Poul-Henning Kamp
528e3c946d Add opt_geom.h to the list. 2003-01-13 08:31:41 +00:00
David E. O'Brien
73badb2452 Build gem(4) on powerpc also. 2003-01-09 16:37:37 +00:00
David E. O'Brien
d16723e8e7 Moved if_hme to hme.
(I need a score card to keep track of the /sys layout fights)
2003-01-09 16:32:12 +00:00
David E. O'Brien
1c65ef9352 Add an hme(4) module.
PR:		46871
Submitted by:	Hartmut Brandt <brandt@fokus.gmd.de>
2003-01-09 16:29:03 +00:00
Thomas Moestl
2f28543e59 Include if_hme_sbus.c, so that the module can also be used on sbus
machines. Remove opt_bdg.h, which is not needed.
2003-01-09 00:46:41 +00:00
Thomas Moestl
28d187c626 Build a gem module, for sparc64 only for now. 2003-01-08 20:40:29 +00:00
David E. O'Brien
b1c519de65 Add an hme(4) module.
PR:		46871
Submitted by:	Hartmut Brandt <brandt@fokus.gmd.de>
2003-01-08 18:45:04 +00:00
Hidetoshi Shimokawa
d6105b602c - Replace printf() with device_printf().
- Separate fc->dev (i.e. fwohci0) and fc->bdev (i.e. firewire0).
- Remove unused firewirebusreg.h.
- Reduce size of descriptor block for asynchronous transmit and
	check the number of descriptor when copying from mbuf.
- Skip mbuf whose length is zero. NFS seems passing such mbuf and
	some chips generates unrecoverable error.
2003-01-04 10:21:11 +00:00
Hidetoshi Shimokawa
b018dcd1b8 - Implement primal Configuration ROM parser.
- Support multiple LUNs for SBP-II.
2002-12-31 10:28:49 +00:00
Julian Elischer
4ea478a43f Make it work -current style. 2002-12-23 22:33:08 +00:00
Tim J. Robbins
56c1b4ab77 libmchain no longer exports m_fixhdr(); remove it from EXPORT_SYMS. 2002-12-14 00:01:51 +00:00
Scott Long
1f380ae506 Move the amd(4) driver to it's own directory in preparation for it growing
an sbus front-end.
2002-12-13 22:59:18 +00:00
Jake Burkholder
f2de139378 Don't run kldxref when installing modules on sparc64. kldxref and the whole
module dependency system rely on linker behaviour that is machine dependent
and not part of the elf spec, and only work by accident on other platforms.

Approved by:	re
2002-12-13 00:32:29 +00:00
Robert Watson
f7883a793c Correct alphabetization of awi entry.
Inane act of:	re
Spotted by:	bde
2002-12-08 17:59:44 +00:00
Robert Watson
e6f88402ff Move the awi module build dependency into the MACHINE_ARCH=i386 entry. 2002-12-08 03:55:35 +00:00
Robert Watson
3358dbd039 Hook up the awi module for build on i386 and pc98, which appear to be
the supported platforms.  We build it into GENERIC, and it is currently
listed on the supported module list for drivers.conf on i386, which
breaks the release build.  This may fix the release build for RC1 on
i386.

Conspiracy of:	re
2002-12-07 14:06:56 +00:00
Robert Watson
c3a04e1ea4 Unhook the old LOMAC module, now replaced with mac_lomac.
Approved by:	re (jhb)
Obtained from:	TrustedBSD Project
Sponsored by:	DARPA, Network Associates Laboratories
2002-12-03 15:12:36 +00:00
Yoshihiro Takahashi
9e6482fc5b Add Makefile.inc to include ../Makefile.inc.
Approved by:	re (rwatson)
2002-12-01 16:07:53 +00:00
Robert Watson
fe5f892d58 Unhook LOMAC kernel module since the functionality is now provided by
the smaller, cleaner, less bit-rotted mac_lomac module.

Approved by:	re
Obtained from:	TrustedBSD Project
Sponsored by:	DARPA, Network Associates Laboratories
2002-11-26 17:53:27 +00:00
Robert Watson
5773cccf19 Hook up the mac_lomac module build.
Approved by:	re
Obtained from:	TrustedBSD Project
Sponsored by:	DARPA, Network Associates Laboratories
2002-11-26 17:35:44 +00:00
Nate Lawson
c38b150ae4 New SCSI target emulator code
This code allows a user program to enable target mode on a SIM and
then emulate any number of devices (disks, tape drives, etc.)  All
decisions about device behavior (UA, CA, inquiry response) are left
to the usermode program and the kernel driver is merely a conduit
for CCBs.  This enables multiple concurrent target emulators, each
using its own backing store and IO model.

Also included is a user program that emulates a disk (RBC) using a
file as a backing store.  This provides functionality similar to
md(4) at the CAM layer.

Code has been tested on ahc(4) and should also work on isp(4) (and
other SIMs that gain target mode support).  It is a complete rewrite
of /sys/cam/scsi_target* and /usr/share/examples/scsi_target.

Design, comments from:	gibbs
Supported by:		Cryptography Research
Approved by:		re
2002-11-22 22:55:51 +00:00
Scott Long
147e2e207e Hook the RAIDFrame module up to the build
Approved by:	re
2002-11-21 14:52:20 +00:00
Warner Losh
668537ba95 Fix make buildkernel.
These makefiles work when building in the sys/modules directory, but
not with the objdir stuff that buildkernel uses.  This is because they
used -I../../../blah rather than -I${.CURDIR}/../../../blah.

# I didn't fix the abuse of CFLAGS to specify -g since I wanted the
# barest minimal change since we're in a code freeze.

Approved by: make buildkernel...
Hat for armchair anarchists: core member fixing src tree damage
2002-11-21 07:21:45 +00:00
Julian Elischer
075c3f0781 Make the bluetooth modules
Approved by:	re
2002-11-21 00:40:11 +00:00
Julian Elischer
878ed22696 The second try a committing the bluetooth code
Has been seen to work on several cards and communicating with
several mobile phones to use them as modems etc.

We are still talking with 3com to try get them to allow us to include
the firmware for their pccard in the driver but the driver is here..
In the mean time
it can be downloaded from the 3com website and loaded using the utility
bt3cfw(8) (supplied) (instructions in the man page)

Not yet linked to the build

Submitted by:	Maksim Yevmenkin <myevmenk@exodus.net>
Approved by:	re
2002-11-20 23:01:59 +00:00
Maxime Henrion
ab03a6a3e2 Remove opt_pci.h from SRCS, it doesn't exist anymore. 2002-11-13 17:45:42 +00:00
Maxime Henrion
64e53f7655 Remove opt_pci.h from SRCS. 2002-11-13 17:43:37 +00:00
Hidetoshi Shimokawa
17821895ee Split userland services to fwdev.c. 2002-11-12 15:22:19 +00:00
Maxime Henrion
aa26768242 Warning fixes. 2002-11-11 10:28:44 +00:00
Maxime Henrion
97be736aca Warning fix. 2002-11-11 10:17:01 +00:00
Maxime Henrion
cca416b2b1 Don't override CWARNFLAGS in these Makefiles. 2002-11-11 10:11:59 +00:00
Maxime Henrion
00a91cb7f4 Don't override CWARNFLAGS in this Makefile. 2002-11-11 10:07:18 +00:00
John Baldwin
f6af4ff6cb Make 3dfx i386-only. The memrange API it uses may be defined in an MI
header, but it is only implemented on i386.
2002-11-08 20:04:38 +00:00
John Baldwin
787f149830 Move rc(4) over to MI notes and enable it as a MI module. 2002-11-08 19:34:26 +00:00
John Baldwin
7d2ba89bbf Move firewire back to being MI. 2002-11-07 16:19:43 +00:00
John Baldwin
01c8945ca3 Create a MACHINE_ARCH == i386 section that first lists modules common
to both i386 and pc98 and then uses MACHINE subsections to list modules
specific to i386/i386 and i386/pc98.
2002-11-07 15:01:12 +00:00
John Baldwin
246d578cba lnc(4) uses kvtop() and is thus i386-only for now. 2002-11-06 22:56:57 +00:00
John Baldwin
c8341b3e2d Make firewire i386-only for now. It doesn't quite handle machines with
64-bit address spaces yet.  Pointy hat to myself for sticking it in the MI
NOTES file to begin with.
2002-11-06 22:30:33 +00:00
John Baldwin
b76c5a11e5 ed(4) uses kvtop() and is thus i386-only. It has several other warnings
related to sizeof(int) != sizeof(void *), but kvtop() is much harder to
fix.

Approved by:	imp
2002-11-06 22:03:53 +00:00
Yoshihiro Takahashi
ab3626d51a Move adding -DPC98 to CFLAGS from each modules to sys/modules/Makefile.inc. 2002-11-06 13:47:00 +00:00
Yoshihiro Takahashi
c7a1bf8bf3 Include "../Makefile.inc". 2002-11-06 13:41:40 +00:00
Matthew N. Dodd
6fe8789d6d - Convert to newbus, bus_space etc.
- Move to MI space.

Tested on:	 i386
2002-11-05 09:37:32 +00:00
Robert Watson
e5e820fd1f Permit MAC policies to instrument the access control decisions for
system accounting configuration and for nfsd server thread attach.
Policies might use this to protect the integrity or confidentiality
of accounting data, limit the ability to turn on or off accounting,
as well as to prevent inappropriately labeled threads from becoming nfs
server threads.

Obtained from:	TrustedBSD Project
Sponsored by:	DARPA, Network Associates Laboratories
2002-11-04 15:13:36 +00:00
Scott Long
fb404d6fcf Hook the aic7xxx modules up. This requires some extra care since aicasm
is a compiler tool and needs to be compiled by the host compiler.  I've
tested this in i386->sparc cross-build, 4.7->current upgrade, normal
buildkernel target, and normal /sys/i386/compile/GENERIC configurations.

Submitted by:	ru
2002-11-03 23:48:14 +00:00
Hidetoshi Shimokawa
3592796a98 Enable if_fwe. 2002-11-03 10:41:30 +00:00
Julian Elischer
585ff168dc Add the netgraph 'source' module.
This is NOT YET CONVERTED TO -current.
This node is a source for preprogrammed packets at a known rate for testing.

I will convert it to -current "in place" but will MFC teh original
pre-conversion variant as that is  what is originally submitted.
Man page my me, info from Dave's README.

Submitted by:	Dave Chapeskie <dchapeskie@SANDVINE.com>
Obtained from:	Sandvine inc.
MFC after:	1 week
2002-10-31 23:03:09 +00:00
John Baldwin
97af632bcb Add an isp(4) module. sbus support is only compiled in on sparc64.
pci support is always compiled in.
2002-10-31 19:50:18 +00:00
John Baldwin
bc96e1c7cf Add a module for mpt(4). 2002-10-31 19:39:23 +00:00
Yoshihiro Takahashi
d2f5398613 Rename the speaker device for pc98 to 'pcspeaker'. 2002-10-31 05:19:33 +00:00
Julian Elischer
6da3d5ce7f Finally get around to committing Bill Paul's FEC netgraph nodes.
These are really only partly netgraph nodes as they do not use the
netgraph interfaces for many of the functions for which they could
be used, however they represent important functionality.

Submitted by:	wpaul
MFC after: 2 days
2002-10-29 19:12:44 +00:00
Maxime Henrion
7ab4b95b67 Don't roll our own clean target, the default one
works better.
2002-10-27 17:06:03 +00:00
Maxime Henrion
5d10e1f7df - Comment a line which sets CISS_DEBUG by default.
- Use -DCISS_DEBUG rather than -DCISS_DEBUG=0.
2002-10-27 12:09:51 +00:00
Robert Watson
763bbd2f4f Slightly change the semantics of vnode labels for MAC: rather than
"refreshing" the label on the vnode before use, just get the label
right from inception.  For single-label file systems, set the label
in the generic VFS getnewvnode() code; for multi-label file systems,
leave the labeling up to the file system.  With UFS1/2, this means
reading the extended attribute during vfs_vget() as the inode is
pulled off disk, rather than hitting the extended attributes
frequently during operations later, improving performance.  This
also corrects sematics for shared vnode locks, which were not
previously present in the system.  This chances the cache
coherrency properties WRT out-of-band access to label data, but in
an acceptable form.  With UFS1, there is a small race condition
during automatic extended attribute start -- this is not present
with UFS2, and occurs because EAs aren't available at vnode
inception.  We'll introduce a work around for this shortly.

Approved by:	re
Obtained from:	TrustedBSD Project
Sponsored by:	DARPA, Network Associates Laboratories
2002-10-26 14:38:24 +00:00
Marcel Moolenaar
8c7cf505d7 Build the following modules on ia64 as well:
ar, asr, bktr, cardbus, cbb, ep, exca, hea, hfa, ipfilter, lomac,
netgraph, pccard, rc, sound, sppp, vinum.
2002-10-24 07:16:24 +00:00
Kris Kennaway
9670fc7423 Remove gcc-specific optimization/debugging CFLAGS 2002-10-24 03:56:16 +00:00
Robert Watson
51a9219f57 Commit of Makefile missed in earlier pass.
Submitted by:	kuriyama
2002-10-24 02:04:03 +00:00
Robert Watson
5136300015 Provide a simple sample labeled access control policy, mac_partition.
This policy can be loaded dynamically, and assigns each process a
partition number, as well as permitting processes to operate outside
the partition.  Processes contained in a partition can only "see"
processes inside the same partition, so it's a little like jail.
The partition of a user can be set using the label mechanisms in
login.conf.  This sample policy is a good starting point for developers
wanting to learn about how to produce labeled policies, as it labels
only one kernel object, the process credential.

PR:
Submitted by:
Reviewed by:
Approved by:
Obtained from:	TrustedBSD Project
Sponsored by:	DARPA, Network Associates Laboratories
2002-10-23 23:36:26 +00:00
John Baldwin
599c57a971 - New-bussify the rc(4) device driver.
- Add detach support to the driver so that you can kldunload the module.
  Note that currently rc_detach() fails to detach a unit if any of its
  child devices are open, thus a kldunload will fail if any of the tty
  devices are currently open.
- sys/i386/isa/ic/cd180.h was moved to sys/dev/ic/cd180.h as part of
  this change.

Requested by:	rwatson
Tested by:	rwatson
2002-10-23 15:53:09 +00:00
Robert Watson
78704ef457 opt_mac.h is no longer required for any of these modules, remove from
the dependencies.

Obtained from:	TrustedBSD Project
Sponsored by:	DARPA, Network Associates Laboratories
2002-10-22 17:10:15 +00:00
Bruce Evans
42d6ed038e Fixed some unsorting. 2002-10-21 00:38:18 +00:00
Robert Watson
e585282846 Hook up opt_mac.h to the build dependencies. The way we currently
handle this stuff is dangerous. :-)

Obtained from:	TrustedBSD Project
Sponsored by:	DARPA, Network Associates Laboratories
2002-10-20 22:59:17 +00:00