while probing for drives, use int13 extended info before standard one and
provide workaround for case we are not getting needed information in case
of floppy drive.
In case of INT13 errors, there are (at least) 3 error codes appearing in case
of missin media - 20h, 31h and 80h. Flag the no media and do not print an
error.
Differential Revision: https://reviews.freebsd.org/D17667
The 4kn support in current bios specific biosdisk.c is broken, as the code
is only implementing the support for the 512B sector size.
This work is building the support for custom size sectors, we still do assume
the requested data to be multiple of 512B blocks and we only do address the
biosdisk.c interface here.
For reference, see also:
https://www.illumos.org/issues/8303https://www.illumos.org/rb/r/547
As the GELI is moved above biosdisk "layer", the GELI should just work
Reviewed by: imp
Differential Revision: https://reviews.freebsd.org/D11174
Clang's Integrated Assembler was previously disabled for i386 with the
note that it "doesn't grok .codeNN directives yet." This is no longer
the case (and hasn't been for some time), and the assembled output .text
is identical between gas and IAS.
MFC after: 2 months
Sponsored by: The FreeBSD Foundation
The current chain command does accept only device, allow also a file to be used,
such as /boot/pmbr or /boot/mbr (or stored third party MBR/VBR block).
Also fix file descriptor leak.
BD_SUPPORT_FRAGS is preprocessor knob to allow partial reads in bioscd/biosdisk
level. However, we already have support for partial reads in bcache, and there
is no need to have duplication via preprocessor controls.
Note that bioscd/biosdisk interface is assumed to perform IO in 512B blocks,
so the only translation we have to do is 512 <-> native block size.
Differential Revision: https://reviews.freebsd.org/D16600
Create loader_{4th,lua,simp}{,.efi}. All of these are installed by
default. Create LOADER_DEFAULT_INTERP to specify the default
interpreter when no other is specified. LOADER_INTERP is the current
interpreter language building. Turn building of lua on by default to
match 4th. simploader is a simplified loader build w/o any interpreter
language (but with a simple loader). This is the historic behavir you
got with WITHOUT_FORTH. Make a hard link to the default loader. This
has to be a hard link rather than the more desirable soft link because
older zfsboot blocks don't support symlinks.
RelNotes: Yes
Differential Revision: https://reviews.freebsd.org/D16705
gptboot was broken when r316078 added the LOADER_GELI_SUPPORT #ifdef to
not pass geliargs via __exec. KARGS_FLAGS_EXTARG must not be used if we're
not going to pass an additional argument to __exec.
PR: 228151
Submitted by: guyyur@gmail.com
MFC after: 1 week
Since bd_open() does early increment for reference counter and bcache
allocation, it also should undo those in case of the error.
Also remove unused variables rdev, g_err.
On a FreeNAS mini XL, with geli encrypted drives the loader crashed in
geli_read().
When we iterate over the list of disks and allocate the zfsdsk structures we
don’t zero out the gdev pointer. In one case that resulted in geli_read()
(called on the bogus pointer) dividing by zero.
Use calloc() to ensure the zfsdsk structure is always zeroed, so the pointer is
initialised to NULL. As a side benefit it gets rid of one #ifdef
LOADER_GELI_SUPPORT.
number and CHS based number. However, on some systems, BIOS would
report 0 in CHS fields, making the system to think there is 0 sectors.
Add a check before comparing the calculated total with bd_sectors.
Reviewed by: tsoome, cy
Differential Revision: https://reviews.freebsd.org/D16577
number of sectors reported through the BIOS. Cylinders * heads *
sectors may not necessarily be equal to the total number of sectors
reported through int13h function 48h.
An example of this is when a Mediasonic HD3-U2B PATA to USB enclosure
with a 80 GB disk is attached. Loader hangs at line 506 of
stand/i386/libi386/biosdisk.c while attempting to read sectors beyond
the end of the disk, sector 156906855. I discovered that the Mediasonic
enclosure was reporting the disk with 9767 cylinders, 255 heads, 63
sectors/track. That's 156906855 sectors. However camcontrol and
Windows 10 both report report the disk having 156301488 sectors, not
the calculated value. At line 280 biosdisk.c sets the sectors to the
higher of either bd->bd_sectors or the total calculated at line 276
(156906855) instead of the lower and correct value of 156301488 reported
by int 13h 48h.
This was tested on all three of my Mediasonic HD3-U2B PATA to USB
enclosures.
Instead of using the higher of bd_sectors (returned by int13h) or the
calculated value, this patch uses the lower and safer of the values.
Reviewed by: tsoome@
Differential Revision: https://reviews.freebsd.org/D16577
zfsloader as a hard link. While newer ones do, the whole point of the
link was to transition to the new world order smoothly. A hard link is
less flexible, but it works and will result in fewer bumps. Adjust
UPDATING entry to match.
Remove all cross references to zfsloader.8 and /boot/zfsloader.
Move ZFS specific info into loader.8.
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D16361
We no longer really need a separate zfsloader. It was useful when we
were first supporting ZFS and had limited ability to properly boot off
of ZFS without the special boot loader. Now that the boot loader has
matured, go the way loader.efi pioneered and just build one
binary. Change the name of the loader to load in the secondary boot
blocks to be just /boot/loader. Provide a symbolic link from zfsloader
to loader so people who have not upgraded their boot blocks are not
affected. This has the happy benefit of making coexistence easier as
well (fewer binaries in the matrix).
Discussed with: allanjude@, kevans@
RelNotes: Yes
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D16361
This moves the bulk of the geli support from lib386/biosdisk.c into a new
geli/gelidev.c which implements a devsw-type device whose dv_strategy()
function handles geli decryption. Support for all arches comes from moving
the taste-and-attach code to the devopen() function in libsa.
After opening any DEVT_DISK device, devopen() calls the new function
geli_probe_and_attach(), which will "attach" the geli code to the open_file
struct by creating a geli_devdesc instance to replace the disk_devdesc
instance in the open_file. That routes all IO for the device through the
geli code.
A new public geli_add_key() function is added, to allow arch/vendor-specific
code to add keys obtained from custom hardware or other sources.
With these changes, geli support will be compiled into all variations of
loader(8) on all arches because the default is WITH_LOADER_GELI.
Relnotes: yes
Sponsored by: Microchip Technology Inc
Differential Revision: https://reviews.freebsd.org/D15743
Eliminate 4 of the copies of the arg parsing in /boot/laoder
by using boot_parse_cmdline.
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D16205
While ../zfs/libzfs.h mostly works, there are a few situations where
it does not. Eliminate the problem by using plain libzfs.h, like we do
for ufs support. This fixes the weird cases, and is easier to
understand. It also follows the general style convetion of avoiding
../ in #includes.
Move the libzfs stuff into libsa. There's no need for it to be a
separate library. The separate library adds to the issues of build
ordering that we see from time to time. Move the filesystem support
into libsa, like all the other filesystem support rather than making
zfs the odd-duck out.
Discussed with: allanjude@
This was causing issues for people booting.
I will likely bring this back as an optional feature, similar to
boot0sio, like gptboot-serial or something.
PR: 221526
Reported by: O. Hartmann <ohartmann@walstatt.org>, Thomas Laus <lausts@acm.org>
Reduce by 1 the number of crazy libraries we need in stand by moving
geli into libsa (where architecturally it belonged all along). This
just moves things around without any code changes.
Normally the serial console is not enabled until /boot.config is read and
we know how the serial console should be configured. Initialize the
consoles early in 'dual' mode (serial & keyboard) with a default serial
rate of 115200. Then serial is re-initialized once the disk is decrypted
and the /boot.config file can be read.
This allows the GELIBoot passphrase to be provided via the serial console.
PR: 221526
Requested by: many
Reviewed by: imp
Sponsored by: Klara Systems
Differential Revision: https://reviews.freebsd.org/D15862
The GELI boot code rounds reads up to 4k, since the encrypted sectors are
4k, and must be decrypted as a unit. With oddball sized disks (almost
always virtual), this can lead to reading past the end of the disk.
Reviewed by: imp, tsoome
Sponsored by: Klara Systems
Differential Revision: https://reviews.freebsd.org/D15844
`rdev` and `disk` serve the same purpose, read the partition table without
the `d_offset` or `d_slice` set, so the read is relative to the start of
the disk. Reuse the already initialized `disk` instead of making another
copy later.
Sponsored by: Klara Systems
The wrong condition is used when evaluating the return of disk_ioctl()
This results in reaching the 'We should not get here' branch in most casts
Reviewed by: imp
Sponsored by: Klara Systems
Differential Revision: https://reviews.freebsd.org/D15839
e.g. boot_mute, boot_single, boot_verbose, and friends; we checked for these
in multiple places, consolidate into common/ and allow a setting of "NO" for
any of these to turn them off. This allows systems with multiple
loader.conf(5) or loader.conf(5) overlay systems to easily turn off
variables in later processed files by setting it to NO.
Reported by: Nick Wolff @ iXsystems
Reviewed by: imp
r330809 replaced duplication of devdesc struct fields with an embedded copy
of the devdesc struct, to avoid fragility. That means all the scattered
comments indicating that structs must match are no longer valid. Likewise
asserts that attempted to mitigate some of the old fragility.
Reviewed by: imp@
* Make autoboot() a static function in stand/common/boot.c, so it does
not shadow local variables in gptboot.c and zfsboot.c.
* Remove -Winline from the Makefiles for gptboot, gptzfsboot and
zfsboot, as gcc will always fail to inline some functions, and there
is nothing we can do about it.
* For gcc <= 4.2.1, silence -Wuninitialized for isoboot, as it produces
a false positive warning.
* Remove deprecated and unnecessary -mcpu=i386 flag from stand/defs.mk,
as there is already a -march=i386 flag further in the file.
Reviewed by: imp
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D15628
r332090 added a LINKER_TYPE test to add the --no-rosegment flag when
linking the i386 loader components with lld. Instead, introduce a
general mechanism for setting LDFLAGS for a specific linker type,
and use it for --no-rosegment.
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D14998
While Arcnet has some continued deployment in industrial controls, the
lack of drivers for any of the PCI, USB, or PCIe NICs on the market
suggests such users aren't running FreeBSD.
Evidence in the PR database suggests that the cm(4) driver (our sole
Arcnet NIC) was broken in 5.0 and has not worked since.
PR: 182297
Reviewed by: jhibbits, vangyzen
Relnotes: yes
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D15057
There's problems with them. The order of efi stuff isn't quite right,
and there's various problems. Revert until thos problems can be fixed.
Reviewed by: kevans@
btxld does not correctly handle input with other than 2 PT_LOAD
segments. Passing --no-rosegment lets lld produce output eqivalent to
ld.bfd: 2 PT_LOAD segments and no PT_GNU_RELRO.
PR: 225775
MFC after: 3 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D14956
This is part of a project for adding the ability to create hybrid CD/USB boot
images. In the BIOS case when booting from something that isn't a CD we need
some extra boot code to actually find our next stage (loader) within an
ISO9660 filesystem. This code will reside in a GPT partition (similar to
gptboot(8) from which it is derived) and looks for /boot/loader in an
ISO9660 filesystem on the image.
Reviewed by: imp
Sponsored by: iXsystems, Inc.
Differential Revision: https://reviews.freebsd.org/D14914
