Commit Graph

400 Commits

Author SHA1 Message Date
Marcel Moolenaar
f0556e70bb Make profiling actually work. The gcc compiler emits a call to the
_mcount() stub when profiling is enabled. Emit this code sequence
for assembly routines as welli (MCOUNT definition in <machine/asm.h>.
We do not pass the GOT entry however as the 4th argument, because it's
not used. The _mcount() stub calls __mcount(), which does the actual
work. Define _MCOUNT_DECL to define __mcount. We do not have an
implementation of mcount(), so we define MCOUNT as empty, but have a
weak alias to _mcount() in _mcount.S.
Note that the _mcount() stub in the kernel is slightly different from
the stub in userland. This is because we do not have to worry about
nested routines in the kernel.
2004-08-25 07:42:34 +00:00
Marcel Moolenaar
344bbdbd54 As I said: the previous commit was untested... Remove an #endif which
should have ceased to exist when its corresponding #if was removed.
2004-08-16 19:05:08 +00:00
Marcel Moolenaar
97752b2cbd Catch up with the drive-by renaming of IA32 to COMPAT_IA32. It must
have been rush hour...

While here, move COMPAT_IA32 from opt_global.h to opt_compat.h like on
amd64. Consequently, it's unsafe to use the option in pcb.h. We now
unconditionally have the ia32 specific registers in the PCB.

This commit is untested.
2004-08-16 18:54:23 +00:00
Marcel Moolenaar
4da47b2fec Add __elfN(dump_thread). This function is called from __elfN(coredump)
to allow dumping per-thread machine specific notes. On ia64 we use this
function to flush the dirty registers onto the backingstore before we
write out the PRSTATUS notes.

Tested on: alpha, amd64, i386, ia64 & sparc64
Not tested on: arm, powerpc
2004-08-11 02:35:06 +00:00
Marcel Moolenaar
b4b7c60d70 Better preserve the original protection for the mappings we maintain.
The hardware always gives read access for privilege level 0, which
means that we cannot use the hardware access rights and privilege
level in the PTE to test whether there's a change in protection.  So,
we save the original vm_prot_t in the PTE as well.
Add pmap_pte_prot() to set the proper access rights and privilege
level on the PTE given a pmap and the requested protection.

The above allows us to compare the protection in pmap_extract_and_hold()
which was missing. While in pmap_extract_and_hold(), add pmap locking.

While here, clean up most (i.e. all but one) PTE macros we inherited
from alpha. They were either unused, used inconsistently, badly named
or simply weren't beneficial. We save the wired and managed state of
the PTE in distinct (bit) fields.

While in pte.h, s/u_int64_t/uint64_t/g

pmap locking obtained from: alc@
feedback & review by: alc@
2004-08-09 20:44:41 +00:00
Marcel Moolenaar
7d9a8b1cd5 De-inline gdb_cpu_signal() because we need to convert the trap vectors
related to breakpoints and single stepping into SIGTRAP so gdb(1) knows
why the remote target has stopped. In particular, gdb(1) needs to know
if the reason is something of its own doing.
2004-08-07 21:40:52 +00:00
Maxime Henrion
9f1b87f106 Instead of calling ia32_pause() conditionally on __i386__ or __amd64__
being defined, define and use a new MD macro, cpu_spinwait().  It only
expands to something on i386 and amd64, so the compiled code should be
identical.

Name of the macro found by:	jhb
Reviewed by:	jhb
2004-08-03 18:44:27 +00:00
Mark Murray
a5ed4a0ad5 Remove extraneous ';'. 2004-08-01 18:51:44 +00:00
Mark Murray
8ab2f5ecc5 Break out the MI part of the /dev/[k]mem and /dev/io drivers into
their own directory and module, leaving the MD parts in the MD
area (the MD parts _are_ part of the modules). /dev/mem and /dev/io
are now loadable modules, thus taking us one step further towards
a kernel created entirely out of modules. Of course, there is nothing
preventing the kernel from having these statically compiled.
2004-08-01 11:40:54 +00:00
Marcel Moolenaar
f95c91bcee Fix -O builds with gcc 3.4 by defining ffs as __builtin_ffs instead of
creating an inline function that just calls __builtin_ffs.
2004-07-30 07:56:53 +00:00
Robert Watson
1a8cfbc450 Pass a thread argument into cpu_critical_{enter,exit}() rather than
dereference curthread.  It is called only from critical_{enter,exit}(),
which already dereferences curthread.  This doesn't seem to affect SMP
performance in my benchmarks, but improves MySQL transaction throughput
by about 1% on UP on my Xeon.

Head nodding:	jhb, bmilekic
2004-07-27 16:41:01 +00:00
David Schultz
479f8d2214 Make FLT_ROUNDS correctly reflect the dynamic rounding mode. 2004-07-19 08:17:25 +00:00
Alan Cox
4a5be3f70a Add partial pmap locking.
Tested by: marcel@
2004-07-19 05:39:49 +00:00
Alan Cox
6fe30ff3f2 Remove unused fields from the pmap. 2004-07-16 03:42:45 +00:00
Marcel Moolenaar
37224cd3fc Mega update for the KDB framework: turn DDB into a KDB backend.
Most of the changes are a direct result of adding thread awareness.
Typically, DDB_REGS is gone. All registers are taken from the
trapframe and backtraces use the PCB based contexts. DDB_REGS was
defined to be a trapframe on all platforms anyway.
Thread awareness introduces the following new commands:
	thread X	switch to thread X (where X is the TID),
	show threads	list all threads.

The backtrace code has been made more flexible so that one can
create backtraces for any thread by giving the thread ID as an
argument to trace.

With this change, ia64 has support for breakpoints.
2004-07-10 23:47:20 +00:00
Marcel Moolenaar
6d33366c74 Update for the KDB framework:
o  ksym_start and ksym_end changed type to vm_offset_t.
o  Make debugging support conditional upon KDB instead of DDB.
o  Call kdb_enter() instead of breakpoint().
o  Remove implementation of Debugger().
o  Call kdb_trap() according to the new world order.

unwinder:
o  s/db_active/kdb_active/g
o  Various s/ddb/kdb/g
o  Add support for unwinding from the PCB as well as the trapframe.
   Abuse a spare field in the special register set to flag whether
   the PCB was actually constructed from a trapframe so that we can
   make the necessary adjustments.

md_var.h:
o   Add RSE convenience macros.
o   Add ia64_bsp_adjust() to add or subtract from BSP while taking
    NaT collections into account.
2004-07-10 22:59:30 +00:00
Marcel Moolenaar
5a39cbaf69 Implement makectx(). The makectx() function is used by KDB to create
a PCB from a trapframe for purposes of unwinding the stack. The PCB
is used as the thread context and all but the thread that entered the
debugger has a valid PCB.
This function can also be used to create a context for the threads
running on the CPUs that have been stopped when the debugger got
entered. This however is not done at the time of this commit.
2004-07-10 19:56:00 +00:00
Marcel Moolenaar
cbc174356c Introduce the KDB debugger frontend. The frontend provides a framework
in which multiple (presumably different) debugger backends can be
configured and which provides basic services to those backends.
Besides providing services to backends, it also serves as the single
point of contact for any and all code that wants to make use of the
debugger functions, such as entering the debugger or handling of the
alternate break sequence. For this purpose, the frontend has been
made non-optional.
All debugger requests are forwarded or handed over to the current
backend, if applicable. Selection of the current backend is done by
the debug.kdb.current sysctl. A list of configured backends can be
obtained with the debug.kdb.available sysctl. One can enter the
debugger by writing to the debug.kdb.enter sysctl.
2004-07-10 18:40:12 +00:00
Marcel Moolenaar
72d44f31a6 Introduce the GDB debugger backend for the new KDB framework. The
backend improves over the old GDB support in the following ways:
o  Unified implementation with minimal MD code.
o  A simple interface for devices to register themselves as debug
   ports, ala consoles.
o  Compression by using run-length encoding.
o  Implements GDB threading support.
2004-07-10 17:47:22 +00:00
Alan Cox
2551e6f323 - Remove unused definitions.
- Move a definition inside the scope of a #ifdef _KERNEL.
2004-06-23 08:06:52 +00:00
Bruce Evans
4c5f10a672 Backed out previous commit. Blind substitution of dev_t by `struct cdev *'
was just wrong here because the dev_t's are user dev_t's.
2004-06-20 03:52:50 +00:00
Poul-Henning Kamp
89c9c53da0 Do the dreaded s/dev_t/struct cdev */
Bump __FreeBSD_version accordingly.
2004-06-16 09:47:26 +00:00
Bruce Evans
b2321e7cdb Moved most of the "MI" definitions and declarations from <machine/profile.h>
to <sys/gmon.h>.  Cleaned them up a little by not attempting to ifdef
for incomplete and out of date support for GUPROF in userland, as in
the sparc64 version.
2004-05-19 15:41:26 +00:00
Stefan Farfeleder
b1aa0ba527 <stdint.h> should define WINT_M{AX,IN} independent from whether WCHAR_MIN is
defined.  Otherwise first including <wchar.h> and then <stdint.h> leads to no
WINT_M{AX,IN} at all.

PR:		64956
Approved by:	das (mentor)
2004-05-18 16:04:57 +00:00
Nate Lawson
65a7c90189 Add an MI implementation of the ACPI global lock routines and retire the
individual asm versions.  The global lock is shared between the BIOS and
OS and thus cannot use our mutexes.  It is defined in section 5.2.9.1 of
the ACPI specification.

Reviewed by:	marcel, bde, jhb
2004-05-05 20:04:14 +00:00
David Schultz
be3930682a Hide FLT_EVAL_METHOD and DECIMAL_DIG in pre-C99 compilation
environments.

PR:		63935
Submitted by:	Stefan Farfeleder <stefan@fafoe.narf.at>
2004-04-25 02:36:29 +00:00
Alan Cox
3edd4a4094 MFamd64
Simplify the sf_buf implementation.  In short, make it a veneer
 over the direct virtual-to-physical mapping.
2004-04-18 07:11:12 +00:00
Warner Losh
f36cfd49ad Remove advertising clause from University of California Regent's
license, per letter dated July 22, 1999 and email from Peter Wemm,
Alan Cox and Robert Watson.

Approved by: core, peter, alc, rwatson
2004-04-07 20:46:16 +00:00
Alan Cox
a3b706071c Remove avail_end. As of yesterday, it is unused. 2004-04-06 01:38:28 +00:00
Alan Cox
c8607538c8 Remove avail_start on those platforms that no longer use it. (Only amd64
does anything with it beyond simple initialization.)
2004-04-05 04:08:00 +00:00
Marcel Moolenaar
6beee8df28 In breakpoint(), use a different immediate to make sure we can
distinguish between debugger inserted breakpoints and fixed
breakpoints. While here, make sure the break instruction never
ends up in the last slot of a bundle by forcing it to be an
M-unit instruction. This makes it easier for use to skip over
it.
2004-03-21 01:41:29 +00:00
Marcel Moolenaar
a36bdc0606 Introduce the cpumask_t type. The purpose of the type is to create a
level of abstraction for any and all CPU mask and CPU bitmap variables
so that platforms have the ability to break free from the hard limit
of 32 CPUs, simply because we don't have more bits in an u_int. Note
that the type is not supposed to solve massive parallelism, where
the number of CPUs can be larger than the width of the widest integral
type. As such, cpumask_t is not supposed to be a compound type. If
such would be necessary in the future, we can deal with the issues
then and there. For now, it can be assumed that the type is integral
and unsigned.

With this commit, all MD definitions start off as u_int. This allows
us to phase-in cpumask_t at our leasure without breaking anything.
Once cpumask_t is used consistently, platforms can switch to wider
(or smaller) types if such would be beneficial (or not; whatever :-)

Compile-tested on: i386
2004-03-20 20:41:40 +00:00
Marcel Moolenaar
e10f4ce153 Replace uint64_t with unsigned long in struct dbreg. 2004-03-20 05:27:14 +00:00
Alan Cox
925d2fedf5 Remove unused declarations. (Some time ago, these variables became fields
of vm/vm.h's struct kva_md_info.)
2004-03-07 07:13:15 +00:00
Lukas Ertl
1bcf24ee9d Fix syntax errors and wrong function prototypes in several MD header
files when using non-GNUC compilers.

PR:             kern/58515
Submitted by:   Stefan Farfeleder <stefan@fafoe.narf.at>
Approved by:    grog (mentor), obrien
2004-03-05 09:19:59 +00:00
Marcel Moolenaar
27e327fdaf Do not pre-map the I/O port space. On the Intel Tiger 4 this conflicts
with a memory mapped I/O range that's immediately before it and is
not 256MB aligned. As a result, when an address is accessed in the
memory mapped range and a direct mapping is added for it, it overlaps
with the pre-mapped I/O port space and causes a machine check.

Based on a patch from: arun@
2004-02-22 02:10:48 +00:00
Dag-Erling Smørgrav
2d6853a650 Whitespace nit. 2004-01-13 15:30:36 +00:00
Jacques Vidrine
e4dc8baa84 Provide sysarch(2) prototypes in the MD sysarch.h headers. While I'm
at it, use the ANSI C generic pointer type for the second argument,
thus matching the documentation.

Remove the now extraneous (and now conflicting) function declarations
in various libc sources.  Remove now unnecessary casts.

Reviewed by:	bde
2004-01-09 16:52:09 +00:00
Peter Wemm
c15e347e22 GC the unused <machine/kse.h> file. 2003-12-24 00:51:30 +00:00
Peter Wemm
ba3fa22e8c Fix last second typo. 2003-12-10 22:59:03 +00:00
Peter Wemm
419d43c635 Use gcc's superior ffs() builtin. 2003-12-10 22:51:40 +00:00
Peter Wemm
a80f5f272c Use ffs(x) == popcnt(x ^ (x - 1)) to implement 64 bit ffsl(). gcc's
ffs() builtin uses this already but truncates the upper 32 bits.
2003-12-10 22:47:02 +00:00
David E. O'Brien
a5b5101f5e Move the bktr(4) <arch>/include/ioctl_{bt848,meteor}.h files to dev/bktr
as these ioctl's aren't MD.  This also means they are installed in
/usr/include/dev/bktr now.  Also provide compatability wrappers for
where these headers lived in 4.x.
2003-12-08 07:22:42 +00:00
Marcel Moolenaar
47eb01b822 Simplify the contexts created by the kernel and remove the related
flags. We now create asynchronous contexts or syscall contexts only.
Syscall contexts differ from the minimal ABI dictated contexts by
having the scratch registers saved and restored because that's where
we keep the syscall arguments and syscall return values.
Since this change affects KSE, have it use kse_switchin(2) for the
"new" syscall context.
2003-12-07 20:47:33 +00:00
Warner Losh
05a463a03d Ooops. These are still used by the bktr driver. David O'Brien has
plans for dealing, but I'll let him deal.

Pointy hat to: imp@
2003-12-07 06:37:32 +00:00
Warner Losh
65b4a1b917 Remote meteor driver. It hasn't compiled in over 3 years. If someone
makes it compile again, and can test it, we can restore the driver to
the tree.
2003-12-07 04:41:11 +00:00
Bruce Evans
81bbee5996 Fixed a pedantic syntax error (a stray semicolon at the end of
PCPU_MD_FIELDS).
2003-11-17 03:40:41 +00:00
Alan Cox
e45db9b837 - Modify alpha's sf_buf implementation to use the direct virtual-to-
physical mapping.
 - Move the sf_buf API to its own header file; make struct sf_buf's
   definition machine dependent.  In this commit, we remove an
   unnecessary field from struct sf_buf on the alpha, amd64, and ia64.
   Ultimately, we may eliminate struct sf_buf on those architecures
   except as an opaque pointer that references a vm page.
2003-11-16 06:11:26 +00:00
Nate Lawson
b72e9cf526 Add the pc_acpi_id PCPU member. The new acpi_cpu driver uses this to
dereference the softc.
2003-11-15 18:58:29 +00:00
Marcel Moolenaar
eea3bbdff8 Remove ia64_highfp_load() now that it's unused. 2003-11-12 03:24:34 +00:00