frame buffers and memory mapped UARTs.
1. Delay calling cninit() until after pmap_bootstrap(). This makes
sure we have PMAP initialized enough to add translations. Keep
kdb_init() after cninit() so that we have console when we need
to break into the debugger on boot.
2. Unfortunately, the ATPIC code had be moved as well so as to
avoid a spurious trap #30. The reason for which is not known
at this time.
3. In pmap_mapdev_attr(), when we need to map a device prior to the
VM system being initialized, use virtual_avail as the KVA to map
the device at. In particular, avoid using the direct map on amd64
because we can't demote by virtue of not being able to allocate
yet. Keep track of the translation.
Re-use the translation after the VM has been initialized to not
waste KVA and to satisfy the assumption in uart(4) that the handle
returned for the low-level console is the same as later returned
when the device is probed and attached.
4. In pmap_unmapdev() remove the mapping from the table when called
pre-init. Otherwise keep the mapping. During bus probe and attach
device resources are mapped and unmapped multiple times, which
would have us destroy the mapping used by the low-level console.
5. In pmap_init(), set pmap_initialized to signal that we're not
pre-init anymore. On amd64, bring the direct map in sync with the
translations created at that time.
6. Implement bus_space_map() and bus_space_unmap() for real: when
the tag corresponds to memory space, call the corresponding
pmap_mapdev() and pmap_unmapdev() functions to construct and
actual handle.
7. In efifb.c and vt_vga.c, remove the crutches and hacks and simply
call pmap_mapdev_attr() or bus_space_map() as desired.
Notes:
1. uart(4) already used bus_space_map() during low-level console
setup but since serial ports have traditionally been I/O port
based, the lack of a proper implementation for said function
was not a problem. It has always supported memory mapped UARTs
for low-level consoles by setting hw.uart.console accordingly.
2. The use of the direct map on amd64 without setting caching
attributes has been a bigger problem than previously thought.
This change has the fortunate (and unexpected) side-effect of
fixing various EFI frame buffer problems (though not all).
PR: 191564, 194952
Special thanks to:
1. XipLink, Inc -- generously donated an Intel Bay Trail E3800
based eval board (ADLE3800PC).
2. The FreeBSD Foundation, in particular emaste@ -- for UEFI
support in general and testing.
3. Everyone who tested the proposed for PR 191564.
4. jhb@ and kib@ for being a soundboard and applying a clue bat
if so needed.
obtain the thread %fs and %gs bases. Add x86 PT_SETFSBASE and
PT_SETGSBASE requests to set the bases from debuggers. The set
requests, similarly to the sysarch({I386,AMD64}_SET_FSBASE),
override the corresponding segment registers.
The main purpose of the operations is to retrieve and modify the tcb
address for debuggee.
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
the Vahalia' "Unix Internals" section 15.12 "Other TLB Consistency
Algorithms". The same algorithm is already utilized by the MIPS pmap
to handle ASIDs.
The PCID for the address space is now allocated per-cpu during context
switch to the thread using pmap, when no PCID on the cpu was ever
allocated, or the current PCID is invalidated. If the PCID is reused,
bit 63 of %cr3 can be set to avoid TLB flush.
Each cpu has PCID' algorithm generation count, which is saved in the
pmap pcpu block when pcpu PCID is allocated. On invalidation, the
pmap generation count is zeroed, which signals the context switch code
that already allocated PCID is no longer valid. The implication is
the TLB shootdown for the given cpu/address space, due to the
allocation of new PCID.
The pm_save mask is no longer has to be tracked, which (significantly)
reduces the targets of the TLB shootdown IPIs. Previously, pm_save
was reset only on pmap_invalidate_all(), which made it accumulate the
cpuids of all processors on which the thread was scheduled between
full TLB shootdowns.
Besides reducing the amount of TLB shootdowns and removing atomics to
update pm_saves in the context switch code, the algorithm is much
simpler than the maintanence of pm_save and selection of the right
address space in the shootdown IPI handler.
Reviewed by: alc
Tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 3 weeks
interacts with interrupts, query ACPI and use MWAIT for entrance into
Cx sleep states. Support C1 "I/O then halt" mode. See Intel'
document 302223-007 "Intelб╝ Processor Vendor-Specific ACPI Interface
Specification" for description.
Move the acpi_cpu_c1() function into x86/cpu_machdep.c and use
it instead of inlining "sti; hlt" sequence in several places.
In the acpi(4) man page, besides documenting the dev.cpu.N.cx_methods
sysctl, correct the names for dev.cpu.N.{cx_usage,cx_lowest,cx_supported}
sysctls.
Both jkim and avg have some other patches implementing the mwait
functionality; this work is unrelated. Linux does not rely on the
ACPI to provide correct tables describing Cx modes. Instead, the
driver has pre-defined knowledge of the CPU models, it was supplied by
Intel.
Tested by: pho (previous versions)
Sponsored by: The FreeBSD Foundation
remains. Xen is planning to phase out support for PV upstream since it
is harder to maintain and has more overhead. Modern x86 CPUs include
virtualization extensions that support HVM guests instead of PV guests.
In addition, the PV code was i386 only and not as well maintained recently
as the HVM code.
- Remove the i386-only NATIVE option that was used to disable certain
components for PV kernels. These components are now standard as they
are on amd64.
- Remove !XENHVM bits from PV drivers.
- Remove various shims required for XEN (e.g. PT_UPDATES_FLUSH, LOAD_CR3,
etc.)
- Remove duplicate copy of <xen/features.h>.
- Remove unused, i386-only xenstored.h.
Differential Revision: https://reviews.freebsd.org/D2362
Reviewed by: royger
Tested by: royger (i386/amd64 HVM domU and amd64 PVH dom0)
Relnotes: yes
- Vmbus multi channel support.
- Vector interrupt support.
- Signal optimization.
- Storvsc driver performance improvement.
- Scatter and gather support for storvsc driver.
- Minor bug fix for KVP driver.
Thanks royger, jhb and delphij from FreeBSD community for the reviews
and comments. Also thanks Hovy Xu from NetApp for the contributions to
the storvsc driver.
PR: 195238
Submitted by: whu
Reviewed by: royger, jhb, delphij
Approved by: royger
MFC after: 2 weeks
Relnotes: yes
Sponsored by: Microsoft OSTC
shows no difference with the code removed.
On both amd64 and i386, assert that a released pmap is not active.
Proposed and reviewed by: alc
Discussed with: Svatopluk Kraus <onwahe@gmail.com>, peter
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
and export them to userland.
- Define __HAVE_REG32 on platforms that define a reg32 structure and check
for this in <sys/procfs.h> to control when to export prstatus32, etc.
- Add prstatus32_t and prpsinfo32_t typedefs for the 32-bit structures.
libbfd looks for these types, and having them fixes 'gcore' in gdb of a
32-bit process on a 64-bit platform.
- Use the structure definitions from <sys/procfs.h> in gcore's elf32 core
dump code instead of duplicating the definitions.
Differential Revision: https://reviews.freebsd.org/D2142
Reviewed by: kib, nathanw (powerpc bits)
MFC after: 1 week
translation. In particular, despite IO-APICs only take 8bit apic id,
IR translation structures accept 32bit APIC Id, which allows x2APIC
mode to function properly. Extend msi_cpu of struct msi_intrsrc and
io_cpu of ioapic_intsrc to full int from one byte.
KPI of IR is isolated into the x86/iommu/iommu_intrmap.h, to avoid
bringing all dmar headers into interrupt code. The non-PCI(e) devices
which generate message interrupts on FSB require special handling. The
HPET FSB interrupts are remapped, while DMAR interrupts are not.
For each msi and ioapic interrupt source, the iommu cookie is added,
which is in fact index of the IRE (interrupt remap entry) in the IR
table. Cookie is made at the source allocation time, and then used at
the map time to fill both IRE and device registers. The MSI
address/data registers and IO-APIC redirection registers are
programmed with the special values which are recognized by IR and used
to restore the IRE index, to find proper delivery mode and target.
Map all MSI interrupts in the block when msi_map() is called.
Since an interrupt source setup and dismantle code are done in the
non-sleepable context, flushing interrupt entries cache in the IR
hardware, which is done async and ideally waits for the interrupt,
requires busy-wait for queue to drain. The dmar_qi_wait_for_seq() is
modified to take a boolean argument requesting busy-wait for the
written sequence number instead of waiting for interrupt.
Some interrupts are configured before IR is initialized, e.g. ACPI
SCI. Add intr_reprogram() function to reprogram all already
configured interrupts, and call it immediately before an IR unit is
enabled. There is still a small window after the IO-APIC redirection
entry is reprogrammed with cookie but before the unit is enabled, but
to fix this properly, IR must be started much earlier.
Add workarounds for 5500 and X58 northbridges, some revisions of which
have severe flaws in handling IR. Use the same identification methods
as employed by Linux.
Review: https://reviews.freebsd.org/D1892
Reviewed by: neel
Discussed with: jhb
Tested by: glebius, pho (previous versions)
Sponsored by: The FreeBSD Foundation
MFC after: 3 weeks
vectors to be dynamically allocated. This allows kernel modules like vmm.ko
to allocate unique IPI slots when loaded (as opposed to hard allocating one
or more vectors).
Also, reorganize the fixed IPI vectors to create a contiguous space for
dynamic IPI allocation.
Reviewed by: kib, jhb
Differential Revision: https://reviews.freebsd.org/D2042
Change the numeric value of IPI_STOP_HARD so it doesn't occupy a valid IPI
slot. This can be done because IPI_STOP_HARD is actually delivered via NMI.
Reviewed by: kib
Differential Revision: https://reviews.freebsd.org/D1983
level-triggered interrupt does not broadcast the EOI message to all
APICs in the system. Instead, interrupt handler must follow LAPIC EOI
with IOAPIC EOI. For modern IOAPICs, the later is done by writing to
EOIR register. Otherwise, Intel provided Linux with a trick of
temporary switching the pin config to edge and then back to level.
Detect presence of EOIR register by reading IO-APIC version. The
summary table in the comments was taken from the Linux kernel. For
Intel, newer IO-APICs are only briefly documented as part of the
ICH/PCH datasheet. According to the BKDG and chipset documentation,
AMD LAPICs do not provide EOI suppression, althought IO-APICs do
declare version 0x21 and implement EOIR.
The trick to temporary switch pin to edge mode to clear IRR was tested
on modern chipset, by pretending that EOIR is not present, i.e. by
forcing io_haseoi to zero.
Tunable hw.lapic_eoi_suppression disables the optimization.
Reviewed by: neel
Tested by: pho
Review: https://reviews.freebsd.org/D1943
Sponsored by: The FreeBSD Foundation
MFC after: 2 months
redirection support. Older versions of the hypervisor mis-interpret
the cpuid format in ioapic registers when x2APIC is turned on, but IR
is not used by the guest OS.
Based on: Linux commit 4cca6ea04d31c22a7d0436949c072b27bde41f86
Tested by: markj
Sponsored by: The FreeBSD Foundation
MFC after: 2 months
hw.x2apic_enable tunable allows disabling it from the loader prompt.
To closely repeat effects of the uncached memory ops when accessing
registers in the xAPIC mode, the x2APIC writes to MSRs are preceeded
by mfence, except for the EOI notifications. This is probably too
strict, only ICR writes to send IPI require serialization to ensure
that other CPUs see the previous actions when IPI is delivered. This
may be changed later.
In vmm justreturn IPI handler, call doreti_iret instead of doing iretd
inline, to handle corner conditions.
Note that the patch only switches LAPICs into x2APIC mode. It does not
enables FreeBSD to support > 255 CPUs, which requires parsing x2APIC
MADT entries and doing interrupts remapping, but is the required step
on the way.
Reviewed by: neel
Tested by: pho (real hardware), neel (on bhyve)
Discussed with: jhb, grehan
Sponsored by: The FreeBSD Foundation
MFC after: 2 months
This can later use this to determine the TSC frequency like is done with
VMware, instead of using a DELAY loop that is not always accurate in an VM.
MFC after: 1 month
KVM clock shares the same data structures between the guest and the host
as Xen so it makes sense to just have a single copy of this code.
Differential Revision: https://reviews.freebsd.org/D1429
Reviewed by: royger (eariler version)
MFC after: 1 month
showing up on Haswell-class CPUs
From the Intel SDM, "Table 3-20. Feature Information Returned in the
ECX Register"
11 | SDBG | A value of 1 indicates the processor supports
IA32_DEBUG_INTERFACE MSR for silicon debug.
Submitted by: jiashiun@gmail.com
Reviewed by: jhb neel
MFC after: 2 weeks
code in sys/kern/kern_dump.c. Most dumpsys() implementations are nearly
identical and simply redefine a number of constants and helper subroutines;
a generic implementation will make it easier to implement features around
kernel core dumps. This change does not alter any minidump code and should
have no functional impact.
PR: 193873
Differential Revision: https://reviews.freebsd.org/D904
Submitted by: Conrad Meyer <conrad.meyer@isilon.com>
Reviewed by: jhibbits (earlier version)
Sponsored by: EMC / Isilon Storage Division
- Dump an NT_X86_XSTATE note if XSAVE is in use. This note is designed
to match what Linux does in that 1) it dumps the entire XSAVE area
including the fxsave state, and 2) it stashes a copy of the current
xsave mask in the unused padding between the fxsave state and the
xstate header at the same location used by Linux.
- Teach readelf() to recognize NT_X86_XSTATE notes.
- Change PT_GET/SETXSTATE to take the entire XSAVE state instead of
only the extra portion. This avoids having to always make two
ptrace() calls to get or set the full XSAVE state.
- Add a PT_GET_XSTATE_INFO which returns the length of the current
XSTATE save area (so the size of the buffer needed for PT_GETXSTATE)
and the current XSAVE mask (%xcr0).
Differential Revision: https://reviews.freebsd.org/D1193
Reviewed by: kib
MFC after: 2 weeks
- Move the existing code to x86/x86/identcpu.c since it is x86-specific.
- If the CPUID2_HV flag is set, assume a hypervisor is present and query
the 0x40000000 leaf to determine the hypervisor vendor ID. Export the
vendor ID and the highest supported hypervisor CPUID leaf via
hv_vendor[] and hv_high variables, respectively. The hv_vendor[]
array is also exported via the hw.hv_vendor sysctl.
- Merge the VMWare detection code from tsc.c into the new probe in
identcpu.c. Add a VM_GUEST_VMWARE to identify vmware and use that in
the TSC code to identify VMWare.
Differential Revision: https://reviews.freebsd.org/D1010
Reviewed by: delphij, jkim, neel
Add support for AMD's nested page tables in pmap.c:
- Provide the correct bit mask for various bit fields in a PTE (e.g. valid bit)
for a pmap of type PT_RVI.
- Add a function 'pmap_type_guest(pmap)' that returns TRUE if the pmap is of
type PT_EPT or PT_RVI.
Add CPU_SET_ATOMIC_ACQ(num, cpuset):
This is used when activating a vcpu in the nested pmap. Using the 'acquire'
variant guarantees that the load of the 'pm_eptgen' will happen only after
the vcpu is activated in 'pm_active'.
Add defines for various AMD-specific MSRs.
Submitted by: Anish Gupta (akgupt3@gmail.com)
This patch adds support for MSI interrupts when running on Xen. Apart
from adding the Xen related code needed in order to register MSI
interrupts this patch also makes the msi_init function a hook in
init_ops, so different MSI implementations can have different
initialization functions.
Sponsored by: Citrix Systems R&D
xen/interface/physdev.h:
- Add the MAP_PIRQ_TYPE_MULTI_MSI to map multi-vector MSI to the Xen
public interface.
x86/include/init.h:
- Add a hook for setting custom msi_init methods.
amd64/amd64/machdep.c:
i386/i386/machdep.c:
- Set the default msi_init hook to point to the native MSI
initialization method.
x86/xen/pv.c:
- Set the Xen MSI init hook when running as a Xen guest.
x86/x86/local_apic.c:
- Call the msi_init hook instead of directly calling msi_init.
xen/xen_intr.h:
x86/xen/xen_intr.c:
- Introduce support for registering/releasing MSI interrupts with
Xen.
- The MSI interrupts will use the same PIC as the IO APIC interrupts.
xen/xen_msi.h:
x86/xen/xen_msi.c:
- Introduce a Xen MSI implementation.
x86/xen/xen_nexus.c:
- Overwrite the default MSI hooks in the Xen Nexus to use the Xen MSI
implementation.
x86/xen/xen_pci.c:
- Introduce a Xen specific PCI bus that inherits from the ACPI PCI
bus and overwrites the native MSI methods.
- This is needed because when running under Xen the MSI messages used
to configure MSI interrupts on PCI devices are written by Xen
itself.
dev/acpica/acpi_pci.c:
- Lower the quality of the ACPI PCI bus so the newly introduced Xen
PCI bus can take over when needed.
conf/files.i386:
conf/files.amd64:
- Add the newly created files to the build process.
code. There are only a handful of MSRs common between the two so there isn't
too much duplicate functionality.
The VT-x code has the following types of MSRs:
- MSRs that are unconditionally saved/restored on every guest/host context
switch (e.g., MSR_GSBASE).
- MSRs that are restored to guest values on entry to vmx_run() and saved
before returning. This is an optimization for MSRs that are not used in
host kernel context (e.g., MSR_KGSBASE).
- MSRs that are emulated and every access by the guest causes a trap into
the hypervisor (e.g., MSR_IA32_MISC_ENABLE).
Reviewed by: grehan
It is the compaction bitmask, with the highest bit defining if compact
format of the xsave area is used at all.
Adjust the definition of struct xstate_hdr, provide define for bit 63.
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
%eax report.
Print the XSAVE features 0xd/1 in the boot banner. The printcpuinfo()
is executed late enough so that XSAVE is already enabled.
There is no known to me off the shelf hardware that implements any
feature bits except XSAVEOPT, the list is taken from SDM rev. 50. The
banner printing will allow us to note the hardware arrival.
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Also disable a couple of ACPI devices that are not usable under Dom0.
To this end a couple of booleans are added that allow disabling ACPI
specific devices.
Sponsored by: Citrix Systems R&D
Reviewed by: jhb
x86/xen/xen_nexus.c:
- Return BUS_PROBE_SPECIFIC in the Xen Nexus attachement routine to
force the usage of the Xen Nexus.
- Attach the ACPI bus when running as Dom0.
dev/acpica/acpi_cpu.c:
dev/acpica/acpi_hpet.c:
dev/acpica/acpi_timer.c
- Add a variable that gates the addition of the devices.
x86/include/init.h:
- Declare variables that control the attachment of ACPI cpu, hpet and
timer devices.
Split a portion of the code in madt_parse_interrupt_override to a
separate function, that is public and can be used from other code.
This will be needed by the Xen port, since FreeBSD needs to parse the
interrupt overrides and notify Xen about them.
This commit should not introduce any functional change.
Sponsored by: Citrix Systems R&D
Reviewed by: jhb, gibbs
x86/acpica/madt.c:
- Introduce madt_parse_interrupt_values() that parses the intr
information from ACPI and returns the triggering and the polarity.
This is a subset of the functionality that used to be part of
madt_parse_interrupt_override().
- Make madt_found_sci_override a global variable that can be used
from other files.
x86/include/acpica_machdep.h:
- Prototype of madt_parse_interrupt_values.
- Extern declaration of madt_found_sci_override.
features. If bootverbose is enabled, a detailed list is provided;
otherwise, a single-line summary is displayed.
- Add read-only sysctls for optional VT-x capabilities used by bhyve
under a new hw.vmm.vmx.cap node. Move a few exiting sysctls that
indicate the presence of optional capabilities under this node.
CR: https://phabric.freebsd.org/D498
Reviewed by: grehan, neel
MFC after: 1 week
This includes:
o All directories named *ia64*
o All files named *ia64*
o All ia64-specific code guarded by __ia64__
o All ia64-specific makefile logic
o Mention of ia64 in comments and documentation
This excludes:
o Everything under contrib/
o Everything under crypto/
o sys/xen/interface
o sys/sys/elf_common.h
Discussed at: BSDcan
This is needed for Xen PV(H) guests, since there's no hardware lapic
available on this kind of domains. This commit should not change
functionality.
Sponsored by: Citrix Systems R&D
Reviewed by: jhb
Approved by: gibbs
amd64/include/cpu.h:
amd64/amd64/mp_machdep.c:
i386/include/cpu.h:
i386/i386/mp_machdep.c:
- Remove lapic_ipi_vectored hook from cpu_ops, since it's now
implemented in the lapic hooks.
amd64/amd64/mp_machdep.c:
i386/i386/mp_machdep.c:
- Use lapic_ipi_vectored directly, since it's now an inline function
that will call the appropiate hook.
x86/x86/local_apic.c:
- Prefix bare metal public lapic functions with native_ and mark them
as static.
- Define default implementation of apic_ops.
x86/include/apicvar.h:
- Declare the apic_ops structure and create inline functions to
access the hooks, so the change is transparent to existing users of
the lapic_ functions.
x86/xen/hvm.c:
- Switch to use the new apic_ops.
XSAVE Extended Features for AVX512 and MPX (Memory Protection Extensions).
Obtained from: Intel's Instruction Set Extensions Programming Reference
(March 2014)
The NetBSD Foundation states "Third parties are encouraged to change the
license on any files which have a 4-clause license contributed to the
NetBSD Foundation to a 2-clause license."
This change removes clauses 3 and 4 from copyright / license blocks that
list The NetBSD Foundation as the only copyright holder.
Sponsored by: The FreeBSD Foundation
AP startup on PVH follows the PV method, so we need to add a hook in
order to diverge from bare metal.
Approved by: gibbs
Sponsored by: Citrix Systems R&D
amd64/amd64/machdep.c:
- Add hook for start_all_aps on native (using native_start_all_aps
defined in mp_machdep).
amd64/amd64/mp_machdep.c:
- Make some variables global because they will also be used by the
Xen PVH AP startup code.
- Use the start_all_aps hook to start APs.
- Rename start_all_aps to native_start_all_aps.
amd64/include/smp.h:
- Add declaration for native_start_all_aps.
x86/include/init.h:
- Declare start_all_aps hook in init_ops.
x86/xen/pv.c:
- Pick external declarations from mp_machdep.
- Introduce Xen PV code to start APs on PVH.
- Set start_all_aps init hook to use the Xen PVH implementation.
This hook will only be implemented for bare metal, Xen doesn't require
any bootstrap code since APs are started in long mode with paging
enabled.
Approved by: gibbs
Sponsored by: Citrix Systems R&D
amd64/amd64/machdep.c:
- Set mp_bootaddress hook for bare metal.
x86/include/init.h:
- Define mp_bootaddress in init_ops.
e820 memory map is fetched using a hypercall under Xen PVH, so add a
hook to init_ops in oder to diverge from bare metal and implement a
Xen variant.
Approved by: gibbs
Sponsored by: Citrix Systems R&D
x86/include/init.h:
- Add a parse_memmap hook to init_ops, that will be called to fetch
and parse the memory map.
amd64/amd64/machdep.c:
- Decouple the fetch and the parse of the memmap, so the parse
function can be shared with Xen code.
- Move code around in order to implement the parse_memmap hook.
amd64/include/pc/bios.h:
- Declare bios_add_smap_entries (implemented in machdep.c).
x86/xen/pv.c:
- Implement fetching of e820 memmap when running as a PVH guest by
using the XENMEM_memory_map hypercall.
When running as a PVH guest, there's no emulated i8254, so we need to
use the Xen PV timer as the early source for DELAY. This change allows
for different implementations of the early DELAY function and
implements a Xen variant for it.
Approved by: gibbs
Sponsored by: Citrix Systems R&D
dev/xen/timer/timer.c:
dev/xen/timer/timer.h:
- Implement Xen early delay functions using the PV timer and declare
them.
x86/include/init.h:
- Add hooks for early clock source initialization and early delay
functions.
i386/i386/machdep.c:
pc98/pc98/machdep.c:
amd64/amd64/machdep.c:
- Set early delay hooks to use the i8254 on bare metal.
- Use clock_init (that will in turn make use of init_ops) to
initialize the early clock source.
amd64/include/clock.h:
i386/include/clock.h:
- Declare i8254_delay and clock_init.
i386/xen/clock.c:
- Rename DELAY to i8254_delay.
x86/isa/clock.c:
- Introduce clock_init that will take care of initializing the early
clock by making use of the init_ops hooks.
- Move non ISA related delay functions to the newly introduced delay
file.
x86/x86/delay.c:
- Add moved delay related functions.
- Implement generic DELAY function that will use the init_ops hooks.
x86/xen/pv.c:
- Set PVH hooks for the early delay related functions in init_ops.
conf/files.amd64:
conf/files.i386:
conf/files.pc98:
- Add delay.c to the kernel build.
Add hooks to amd64 in order to have diverging implementations, since
on Xen PV the metadata is passed to the kernel in a different form.
Approbed by: gibbs
Sponsored by: Citrix Systems R&D
amd64/amd64/machdep.c:
- Define init_ops for native.
- Put native code inside of native_parse_preload_data hook.
- Call the parse_preload_data in order to fill the metadata info.
x86/include/init.h:
- Declare the init_ops struct.
x86/xen/pv.c:
- Declare xen_init_ops that contains the Xen PV implementation of
init_ops.
- Implement the parse_preload_data for Xen PVH, the info is fetched
from HYPERVISOR_start_info->cmd_line as provided by Xen.
I/O windows, the default is to preserve the firmware-assigned resources.
PCI bus numbers are only managed if NEW_PCIB is enabled and the architecture
defines a PCI_RES_BUS resource type.
- Add a helper API to create top-level PCI bus resource managers for each
PCI domain/segment. Host-PCI bridge drivers use this API to allocate
bus numbers from their associated domain.
- Change the PCI bus and CardBus drivers to allocate a bus resource for
their bus number from the parent PCI bridge device.
- Change the PCI-PCI and PCI-CardBus bridge drivers to allocate the
full range of bus numbers from secbus to subbus from their parent bridge.
The drivers also always program their primary bus register. The bridge
drivers also support growing their bus range by extending the bus resource
and updating subbus to match the larger range.
- Add support for managing PCI bus resources to the Host-PCI bridge drivers
used for amd64 and i386 (acpi_pcib, mptable_pcib, legacy_pcib, and qpi_pcib).
- Define a PCI_RES_BUS resource type for amd64 and i386.
Reviewed by: imp
MFC after: 1 month
