fts(3) detects directories even in FTS_NOSTAT mode (so it can descend into
them).
No functional change is intended, but find commands that use -type d but no
primaries that still require stat/lstat calls make considerably fewer system
calls.
originally.
I am not sure why exactly have I moved it during one of many refactorings
during camlock project, but obviously it opens race window that may cause
use after free panics during SIM (in reported cases umass(4)) detach.
MFC after: 2 weeks
LibAliasSetAddress() uses its own mutex to serialize changes.
While here, convert ifp->if_xname access to if_name() function.
MFC after: 2 weeks
Sponsored by: Yandex LLC
After r252890 we are naively attempting to pass through the
inode flags. This is technically incorrect as the ext2
inode flags don't match the UFS/system values used in
FreeBSD and a clean conversion is needed.
Some filtering was left in place so the change didn't cause
significant changes in FreeBSD but some of the garbage passed
is likely to be the cause for warning messages in linux.
Fix the issue by resetting the flags before conversion as was
done previously. This also means we will not pass the EXT4_*
inode flags into FreeBSD's inode.
PR: kern/185448
MFC after: 3 days
controller found in the MBP2013 has been observed to not work properly
unless this operation is performed.
MFC after: 1 week
Tested by: Huang Wen Hui <huanghwh@gmail.com>
inject interrupts into the guest without causing a VM-exit.
This feature can be disabled by setting the tunable "hw.vmm.vmx.use_apic_pir"
to "0".
The following sysctls provide information about this feature:
- hw.vmm.vmx.posted_interrupts (0 if disabled, 1 if enabled)
- hw.vmm.vmx.posted_interrupt_vector (vector number used for vcpu notification)
Tested on a Intel Xeon E5-2620v2 courtesy of Allan Jude at ScaleEngine.
This control is needed to enable "Posted Interrupts" and is present in all
the Intel VT-x implementations supported by bhyve so enable it as the default.
With this VM-exit control enabled the processor will acknowledge the APIC and
store the vector number in the "VM-Exit Interruption Information" field. We
now call the interrupt handler "by hand" through the IDT entry associated
with the vector.
Because we respect the FreeBSD src tree layout under /usr/tests, and because
the layout of the tests in the atf distfile does not match the former, the
tests for atf-c++ were not able to find the process_helper binary.
Fix this by explicitly hardcoding the right path in the FreeBSD test suite.
Obtained from: atf (git 1f0e878f7f127741a3762883ef24aef317e239d5)
MFC after: 1 week
Put test programs for internal modules into a 'detail' subdirectory of the
libatf-c and libatf-c++ test directories, just as the upstream distribution
does. This is necessary because the tests assume such layout to find the
process_helper program, and currently fail because of this divergence.
MFC after: 1 week
Fix geom_uncompress(4) module loading. Don't link zlib.c (which is a module
itself) directly.
The built module was verified and used to read a few mkulzma(8) images on
amd64 to validate some of the informations on the manual page.
While here, don't overwrite CFLAGS.
Reviewed by: ray
Approved by: adrian (mentor)
make CAM to not try negotiate unsupported settings and suppress warnings.
While there, enable command queuing on pass-through devices, announced
in hba_inquiry, but disabled. Even though queue size is very small, It
seems working well enough.
Reviewed by: scottl
MFC after: 2 weeks
has the same prefix as some other alias on the same interface, use
newly-added rt_addrmsg() instead of hand-rolled in_addralias_rtmsg().
This eliminates the following rtsock messages:
Pinned RTM_ADD for prefix (for alias addition).
Pinned RTM_DELETE for prefix (for alias withdrawal).
Example (got 10.0.0.1/24 on vlan4, playing with 10.0.0.2/24):
before commit, addition:
got message of size 116 on Fri Jan 10 14:13:15 2014
RTM_NEWADDR: address being added to iface: len 116, metric 0, flags:
sockaddrs: <NETMASK,IFP,IFA,BRD>
255.255.255.0 vlan4:8.0.27.c5.29.d4 10.0.0.2 10.0.0.255
got message of size 192 on Fri Jan 10 14:13:15 2014
RTM_ADD: Add Route: len 192, pid: 0, seq 0, errno 0, flags:<UP,PINNED>
locks: inits:
sockaddrs: <DST,GATEWAY,NETMASK>
10.0.0.0 10.0.0.2 (255) ffff ffff ff
after commit, addition:
got message of size 116 on Fri Jan 10 13:56:26 2014
RTM_NEWADDR: address being added to iface: len 116, metric 0, flags:
sockaddrs: <NETMASK,IFP,IFA,BRD>
255.255.255.0 vlan4:8.0.27.c5.29.d4 14.0.0.2 14.0.0.255
before commit, wihdrawal:
got message of size 192 on Fri Jan 10 13:58:59 2014
RTM_DELETE: Delete Route: len 192, pid: 0, seq 0, errno 0, flags:<UP,PINNED>
locks: inits:
sockaddrs: <DST,GATEWAY,NETMASK>
10.0.0.0 10.0.0.2 (255) ffff ffff ff
got message of size 116 on Fri Jan 10 13:58:59 2014
RTM_DELADDR: address being removed from iface: len 116, metric 0, flags:
sockaddrs: <NETMASK,IFP,IFA,BRD>
255.255.255.0 vlan4:8.0.27.c5.29.d4 10.0.0.2 10.0.0.255
adter commit, withdrawal:
got message of size 116 on Fri Jan 10 14:14:11 2014
RTM_DELADDR: address being removed from iface: len 116, metric 0, flags:
sockaddrs: <NETMASK,IFP,IFA,BRD>
255.255.255.0 vlan4:8.0.27.c5.29.d4 10.0.0.2 10.0.0.255
Sending both RTM_ADD/RTM_DELETE messages to rtsock is completely wrong
(and requires some hacks to keep prefix in route table on RTM_DELETE).
I've tested this change with quagga (no change) and bird (*).
bird alias handling is already broken in *BSD sysdep code, so nothing
changes here, too.
I'm going to MFC this change if there will be no complains about behavior
change.
While here, fix some style(9) bugs introduced by r260488
(pointed by glebius and bde).
Sponsored by: Yandex LLC
MFC after: 4 weeks
One of the tests for test(1) fails and some of the tests for sh(1) are
silently bypassed when running as root.
To fix these tests and ensure they all run, mark the test programs for
sh(1) and test(1) as requiring an unprivileged user. (This should and
will be the default in Kyua but isn't yet.)
MFC after: 1 week
When generating a Kyuafile in the KYUAFILE=auto case, use a filename
that is unlikely to clash with the filename used by explicitly-provided
Kyuafiles.
This allows a Makefile to set KYUAFILE=yes and provide a Kyuafile in
the same directory when such Makefile was previously relying on
KYUAFILE=auto.
Fixes issues with new Kyuafiles not being picked up in NO_CLEAN builds
(although manual intervention is required once, unfortunately, as
described in UPDATING).
Reviewed by: sjg
MFC after: 1 week
included.. netstat uses -DKERNEL=1 to get these parts and breaks the
build w/o it...
melifaro@ says that ae@ is probably asleep, and the PR doesn't have
this part of the patch... Probably a local change got in by accident..
PR: 185148
Pointy hat to: ae@
CFLAGS.clang in sys/conf/Makefile.arm, since the main kernel build does
not use <bsd.sys.mk>. So revert that particular change for now.
Pointy hat to: me
Noticed by: zbb
MFC after: 3 days
X-MFC-With: r259730
Using a .c extension for a C++ file raises the following warning, which
breaks our header file tests if the compiler is using -Werror as well:
c++: warning: treating 'c' input as 'c++' when in C++ mode, this
behavior is deprecated
Obtained from: atf (git 3104010c2849330440cc0ce108ff341913433339)
MFC after: 3 days
and invoke it for bootverbose logging, and also from a new DDB command,
"show devmap". Also tweak the format string for the bootverbose output
of physical memory chunks to get the leading zeros in the hex values.
Adding/deleting interface addresses involves access to 3 different subsystems,
int different parts of code. Each call can fail, so reporting successful
operation by rtsock in the middle of the process error-prone.
Further split routing notification API and actual rtsock calls via creating
public-available rt_addrmsg() / rt_routemsg() functions with "private"
rtsock_* backend.
MFC after: 2 weeks
