another process is in open() or stat() for the device node, then
close() from the owning process does not result in cdevsw close
method call. This fixes the pemanent "Device busy" seen.
Changed the sndstat_lock from mutex to sx. This allows to extend
the region covered by the lock, to include the uiomove() call in
sndstat_read() and bufptr increment. This fixes the "panic:
sbuf_put_byte called with finished or corrupt sbuf" seen.
In collaboration with: kib
MFC after: 1 week
code and which had only stub implementations or no implementation on all
platforms. Makes gxemul compile.
Hinted by: rwatson
MFC after: 3 weeks
X-MFC by: rwatson:
if the accounting log file is atomically replaced with a new file
(such as during log rotation).
- Simplify accounting log rotation a bit. There is no need to re-run
accton(8) after renaming the new log file to it's real name.
PR: kern/167321
Tested by: Jeremy Chadwick
1) Always implement missing bus space methods using a panic() stub rather
than a NULL pointer. This appeared not to trip up any existing device
drivers, but due to the nature of the devices I'm supporting locally,
I'm making use of some of the more obscure busspace methods, and
panic() is a preferred failure mode. For example, do this for the
setregion methods.
2) Hook up several existing busspace method implementations that were
provided in the file, but not actually present in the methods
structure. Especially, single-byte bus I/O routines. This should
allow bugs to be fixed in the Atheros 802.11 driver.
There are still some remaining unimplemented methods that would be
desirable to implement -- especially, 64-bit I/O calls that would
observably accelerate device performance on FPGA-based soft CPU cores
that are typically clocked an order of magnitude slower than
conventional hard core CPUs, but that remains for another day.
MFC after: 3 weeks
Discussed with: jmallett, scottl
Sponsored by: DARPA, AFRL
entirely of one machdep file lifted from the MALTA port, as well as
a low-level console and tty driver for the gxemul debugging console
device (the emulators stdio). As with many low-level embedded and
hypervisor console devices, it is polled only, so we drive TTY I/O
from a callout; we are perhaps a bit too aware of the MIPS physical
maps in order to attach the console before newbus comes to life.
The sample kernel configuration depends on an MD-based root file
system, which is not provided. However, any 64-bit, big-endian
userspace image (such as one generated for MALTA) should work.
This will hopefully be supplemented by additional device drivers for
gxemul-specific hardware simulations from Juli Mallett. We have
found oldtestmips quite useful for testing and improving aspects of
the MIPS port, so it's worth supporting better in FreeBSD.
Requested by: theraven, jmallett
Sponsored by: DARPA, AFRL
MFC after: 3 weeks
* Flesh out the PLL configuration fetch function, which will return the PLL
configuration based on the unit number and speed.
* Remove the PLL speed config logic from the AR71xx/AR91xx chip PLL config
function - pass in a 'pll' value instead.
* Modify arge_set_pll() to:
+ fetch the PLL configuration
+ write the PLL configuration
+ update the MII speed configuration.
This will allow if_arge to override the PLL configuration as required.
Obtained from: Linux/Atheros/OpenWRT
* Add a new method to set the MII mode - GMII, RGMII, RMII, MII.
+ arge0 supports all four (two for non-Gige interfaces.)
+ arge1 only supports two (one for non-gige interfaces.)
* Set the MII clock speed when changing the MAC PLL speed.
+ Needed for AR91xx and AR71xx; not needed for AR724x.
Tested:
* AR71xx only, I'll do AR913x testing tonight and fix whichever issues
creep up.
TODO:
* Implement the missing AR7242 arge0 PLL configuration, but don't
adjust the MII speed accordingly.
* .. the AR7240/AR7241 don't require this, so make sure it's not set
accidentally.
Bugs (not fixed here):
* Statically configured arge speeds are still broken - investigate why
that is on the AP96 board. Autonegotiate is working fine, but there
still seems to be an occasionally heavy packet loss issue.
Obtained from: Linux/Atheros/OpenWRT
- Align the RX buffers on the cache line size, otherwise the requirement
of partial cache line flushes on every are pretty much guaranteed. [1]
- Make the code setting the RX timeout match its comment (apparently,
start and stop bits were missed in the previous calculation). [1]
- Cover the busdma operations in at91_usart_bus_{ipend,transmit}() with
the hardware mutex, too, so these don't race against each other.
- In at91_usart_bus_ipend(), reduce duplication in the code dealing with
TX interrupts.
- In at91_usart_bus_ipend(), turn the code dealing with RX interrupts
into an else-if cascade in order reduce its complexity and to improve
its run-time behavior.
- In at91_usart_bus_ipend(), add missing BUS_DMASYNC_PREREAD calls on
the RX buffer map before handing things over to the hardware again. [1]
- In at91_usart_bus_getsig(), used a variable of sufficient width for
storing the contents of USART_CSR.
- Use KOBJMETHOD_END.
- Remove an unused header.
Submitted by: Ian Lepore [1]
Reviewed by: Ian Lepore
MFC after: 1 week
V100, the firmware is known to be broken and not allowing to simultaneously
open disk devices, causing attempts to boot from a mirror or RAIDZ to cause
a crash. This will be worked around later. The firmwares of newer sun4u models
don't seem to exhibit this problem though.
Steps for ZFS booting:
1. create VTOC8 label
# gpart create -s vtoc8 da0
2. add partitions, f.e.:
# gpart add -t freebsd-zfs -s 60g da0
# gpart add -t freebsd-swap da0
resulting in something like:
# gpart show
=> 0 143331930 da0 VTOC8 (68G)
0 125821080 1 freebsd-zfs (60G)
125821080 17510850 2 freebsd-swap (8.4G)
3. create zpool
# zpool create bunker da0a
or for mirror/RAIDZ (after preparing additional disks as in steps 1. + 2.):
# zpool create bunker mirror da0a da1a
# zpool create bunker raidz da0a da1a da2a ...
4. set bootfs
# zpool set bootfs=bunker bunker
5. install zfsboot
# zpool export bunker
# gpart bootcode -p /boot/zfsboot da0
6. write zfsloader to the ZFS Boot Block (so far, there's no dedicated tool
for this, so dd(1) has to be used for this purpose)
When using mirror/RAIDZ, step 4. and the dd(1) invocation should be repeated
for the additional disks in order to be able to boot from another disk in
case of failure.
# sysctl kern.geom.debugflags=0x10
# dd if=/boot/zfsloader of=/dev/da0a bs=512 oseek=1024 conv=notrunc
# zpool import bunker
7. install system on ZFS filesystem
Don't forget to set 'zfs_load="YES"' and vfs.root.mountfrom="zfs:bunker" in
loader.conf as well as 'zfs_enable="YES"'in rc.conf.
8. copy zpool.cache to the ZFS filesystem
cp -p /boot/zfs/zpool.cache /bunker/boot/zfs/zpool.cache
9. set mountpoint
# zfs set mountpoint=/ bunker
10. Now, given that aliases for all disks in the zpool exists (check with
the `devalias` command on the boot monitor prompt) and disk0 corresponds
to da0 (likewise for additional disks), the system can be booted from the
ZFS with:
{1} ok boot disk0
PR: 165025
Submitted by: Gavin Mu
* Modified hwmp_recv_preq:
o cleaned up code, removed rootmac variable because preq->origaddr
is the root when we recevie a Proactive PREQ;
o Modified so that a PREP in response of a Proactive PREQ is unicast,
a PREP is ALWAYS unicast;
* Modified hwmp_recv_prep:
o Before we mark a route to be valid we should remove the discovery
flag and then mark it valid in such a way we wont lose the isgate flag;
Approved by: adrian
* Added a new discovery flag IEEE80211_MESHRT_FLAGS_DISCOVER;
* Modified ieee80211_ioctl.h to include IEEE80211_MESHRT_FLAGS_DISCOVER;
* Added hwmp_rediscover_cb, which will be called by a timeout to do
rediscovery if we have not reach max number of preq discovery;
* Modified hwmp_discover to setup a callout for path rediscovery;
* Added to ieee80211req_mesh_route to have a back pointer to ieee80211vap
for the discovery callout context;
* Modified mesh_rt_add_locked arguemnt from ieee80211_mesh_state to
ieee80211vap, this because we have to initialize the above back pointer;
Approved by: adrian
* Renamed IEEE80211_ELEMID_MESHPANN to IEEE80211_ELEMID_MESHGANN according to
amendment;
* Added IEEE80211_IOC_MESH_GATE that controls whether Mesh Gate Announcement
is activated or not;
* Renamed all flags from Portal to Gate in HWMP frames;
* Removed IEEE80211_ACTION_MESHPANN enum cause its part of the Mesh Action
category now as per amendment;
* Renamed IEEE80211_MESHFLAGS_PORTAL to IEEE80211_MESHFLAGS_GATE in
ieee80211_mesh_state flags;
* Modified ieee80211_hwmp.c/ieee80211_mesh.c to use new GATE flags;
Approved by: adrian
* Introduced a new HWMP sysctl, Root Confirmation Interval;
* Added hr_lastrootconf to hwmp_route, is for ratecheck for a specific ROOT;
* We missed reading RANN.interval subfield from a RANN frame before;
* Updated hwmp_recv_rann according to amendment, see comments;
Approved by: adrian
* Added mpp_senderror for Mesh Path Selection protocol;
* Added hwmp_senderror that will send an HWMP PERR according to the
supplied reason code;
* Call mpp_senderror when deleting a route with correct reason code
for whether the route is marked proxy or not;
* Call mpp_senderror when trying to forward an individually addressed
frame and there is no forwarding information;
Approved by: adrian
* When receiving a Proactive PREQ dont return after processing it but propagate;
* When we propagate we should not enforce ratechecking;
* Added checking for multiple pred ID detection;
* Storing proxy orig address when PREQ is not for us;
Approved by: adrian
* Moved hs_lastpreq to be hr_lastpreq cause this rate check should be per
target mesh STA according to amendment (NB: not applicable for PERR);
* Modified hwmp_send_preq to use two extra arguments for last sent PREQ and
minimum PREQ interval;
* hwmp_send_preq is called with last two arguments equal to NULL when sending
Proactive PREQs cause the call back task enforces the rate check;
Approved by: adrian
* Added assertion in mesh_rt_update;
* Fixed some prep propagation that where multicast, ALL PREPS ARE UNICAST;
* Fixed PREP acceptance criteria;
* Fixed some PREP debug messages;
* HWMP intermediate reply (PREP) should only be sent if we have newer
forwarding infomration (FI) about target;
* Fixed PREP propagation condition and PREP w/ AE handling;
* Ignore PREPs that have unknown originator.
* Removed old code inside PREP that was for proactive path building
to root mesh;
Other errors include:
* use seq number of target and not orig mesh STA;
* Metric is what we have stored in our FI;
* Error in amendment, Hop count is not 0 but equals FI hopcount for target;
Approved by: adrian
* In mesh_recv_indiv_data_to_fwd update route entry for both meshDA and meshSA;
* In mesh_recv_indiv_data_to_me update route entry for meshSA;
* in ieee80211_mesh_rt_update put code so that a proxy entry that is gated
by us (number of hops == 0) is never invalidated;
* Fixed so that we always call ieee80211_mesh_rt_update with lifetime in ms;
Approved by: adrian
* Modified HWMP PREP/PREQ to contain a proxy entry and also changed PREP
frame processing according to amendment as following:
o Fixed PREP to always update/create if acceptance criteria is meet;
o PREQ processing to reply if request is for a proxy entry that is
proxied by us;
o Removed hwmp_discover call from PREQ, because sending a PREP will
build the forward path, and by receving and accepting a PREQ we
have already built the reverse path (non-proactive code);
* Disabled code for pro-active in PREP for now (will make a separate patch for
pro-active HWMP routing later)
* Added proxy information for a Mesh route, mesh gate to use and proxy seqno;
* Modified ieee80211_encap according to amendment;
* Introduced Mesh control address extension enum and removed unused struct,
also rename some structure element names.
* Modified mesh_input and added mesh_recv_* that should verify and process mesh
data frames according to 9.32 Mesh forwarding framework in amendment;
* Modified mesh_decap accordingly to changes done in mesh control AE struct;
Approved by: adrian
* Introduced ieee80211_mesh_rt_update that updates a route with the
maximum(lifetime left, new lifetime);
* Modified ieee80211_mesh_route struct by adding a lock that will be used
by both ieee80211_mesh_rt_update and precursor code (added in future commit);
* Modified in ieee80211_hwmp.c HWMP code to use new ieee80211_mesh_rt_update;
* Modified mesh_rt_flush_invalid to use new ieee80211_mesh_rt_update;
* mesh_rt_flush also checks that lifetime == 0, this gives route discovery
a change to complete;
* Modified mesh_recv_mgmt case IEEE80211_FC0_SUBTYPE_BEACON:
when ever we received a beacon from a neighbor we update route lifetime;
Approved by: adrian
* Added IEEE80211_MESH_MAX_NEIGHBORS and it is set to 15, same as before;
* Modified mesh_parse_meshpeering_action to verify MPM frame and send
correct reason code for when a frame is rejected according to standard spec;
* Modified mesh_recv_action_meshpeering_* according to the standard spec;
* Modified mesh_peer_timeout_cb to always send CLOSE frame when in CONFIRMRCV
state according to the standard spec;
Approved by: adrian
* Old struct ieee80211_meshpeer_ie had wrong peer_proto field size;
* Added IEEE80211_MPM_* size macros;
* Created an enum for the Mesh Peering Protocol Identifier field according
to the standard spec and removed old defines;
* Abbreviated Handshake Protocol is not used by the standard anymore;
* Modified mesh_verify_meshpeer to use IEEE80211_MPM_* macros for verification;
* Modified mesh_parse_meshpeering_action to parse complete frame, also to parse
it according to the standard spec;
* Modified ieee80211_add_meshpeer to construct correct MPM frames according to
the standard spec;
Approved by: adrian
* Added new action category IEEE80211_ACTION_CAT_SELF_PROT which is used by 11s
for Mesh Peering Management;
* Updated Self protected enum Action codes to start from 1 instead of 0
according to the standard spec;
* Removed old and wrong action categories IEEE80211_ACTION_CAT_MESHPEERING;
* Modified ieee80211_mesh.c and ieee80211_action.c to use the new action
category code;
* Added earlier verification code in ieee80211_input;
Approved by: adrian
