Last an(4) devices have been End Of Life and End Of Sale in 2007.
Time to remove this driver.
Differential Revision: https://reviews.freebsd.org/D30679
Reviewed by: imp (earlier version), emaste (earlier version)
Sponsored by: Diablotin Systems
This removes support for loadable software backends. The KTLS OCF
support is now always included in kernels with KERN_TLS and the
ktls_ocf.ko module has been removed. The software encryption routines
now take an mbuf directly and use the TLS mbuf as the crypto buffer
when possible.
Bump __FreeBSD_version for software backends in ports.
Reviewed by: gallatin, markj
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D30138
Other FDT platform (like powerpc64* or riscv64) don't have gpio built
by default so just compile the module for those two arches.
Fixes: 9e08f82058 ("modules: Add sdhci_fdt module")
DXR maintains compressed lookup structures with a trivial search
procedure. A two-stage trie is indexed by the more significant bits of
the search key (IPv4 address), while the remaining bits are used for
finding the next hop in a sorted array. The tradeoff between memory
footprint and search speed depends on the split between the trie and
the remaining binary search. The default of 20 bits of the key being
used for trie indexing yields good performance (see below) with
footprints of around 2.5 Bytes per prefix with current BGP snapshots.
Rebuilding lookup structures takes some time, which is compensated for by
batching several RIB change requests into a single FIB update, i.e. FIB
synchronization with the RIB may be delayed for a fraction of a second.
RIB to FIB synchronization, next-hop table housekeeping, and lockless
lookup capability is provided by the FIB_ALGO infrastructure.
DXR works well on modern CPUs with several MBytes of caches, especially
in VMs, where is outperforms other currently available IPv4 FIB
algorithms by a large margin.
Synthetic single-thread LPM throughput test method:
kldload test_lookup; kldload dpdk_lpm4; kldload fib_dxr
sysctl net.route.test.run_lps_rnd=N
sysctl net.route.test.run_lps_seq=N
where N is the number of randomly generated keys (IPv4 addresses) which
should be chosen so that each test iteration runs for several seconds.
Each reported score represents the best of three runs, in million
lookups per second (MLPS), for two bechmarks (RND & SEQ) with two FIBs:
host: single interface address, local subnet route + default route
BGP: snapshot from linx.routeviews.org, 887957 prefixes, 496 next hops
Bhyve VM on an Intel(R) Xeon(R) CPU E5-2670 0 @ 2.60 GHz:
inet.algo host, RND host, SEQ BGP, RND BGP, SEQ
bsearch4 40.6 20.2 N/A N/A
radix4 7.8 3.8 1.2 0.6
radix4_lockless 18.0 9.0 1.6 0.8
dpdk_lpm4 14.4 5.0 14.6 5.0
dxr 70.3 34.7 43.0 19.5
Intel(R) Core(TM) i5-5300U CPU @ 2.30 GHz:
inet.algo host, RND host, SEQ BGP, RND BGP, SEQ
bsearch4 47.0 23.1 N/A N/A
radix4 8.5 4.2 1.9 1.0
radix4_lockless 19.2 9.5 2.5 1.2
dpdk_lpm4 31.2 9.4 31.6 9.3
dxr 84.9 41.4 51.7 23.6
Intel(R) Core(TM) i7-4771 CPU @ 3.50 GHz:
inet.algo host, RND host, SEQ BGP, RND BGP, SEQ
bsearch4 59.5 29.4 N/A N/A
radix4 10.8 5.5 2.5 1.3
radix4_lockless 24.7 12.0 3.1 1.6
dpdk_lpm4 29.1 9.0 30.2 9.1
dxr 101.3 49.9 69.8 32.5
AMD Ryzen 7 3700X 8-Core Processor @ 3.60 GHz:
inet.algo host, RND host, SEQ BGP, RND BGP, SEQ
bsearch4 70.8 35.4 N/A N/A
radix4 14.4 7.2 2.8 1.4
radix4_lockless 30.2 15.1 3.7 1.8
dpdk_lpm4 29.9 9.0 30.0 8.9
dxr 163.3 81.5 99.5 44.4
AMD Ryzen 5 5600X 6-Core Processor @ 3.70 GHz:
inet.algo host, RND host, SEQ BGP, RND BGP, SEQ
bsearch4 93.6 46.7 N/A N/A
radix4 18.9 9.3 4.3 2.1
radix4_lockless 37.2 18.6 5.3 2.7
dpdk_lpm4 51.8 15.1 51.6 14.9
dxr 218.2 103.3 114.0 49.0
Reviewed by: melifaro
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D29821
After length decisions, we've decided that the if_wg(4) driver and
related work is not yet ready to live in the tree. This driver has
larger security implications than many, and thus will be held to
more scrutiny than other drivers.
Please also see the related message sent to the freebsd-hackers@
and freebsd-arch@ lists by Kyle Evans <kevans@FreeBSD.org> on
2021/03/16, with the subject line "Removing WireGuard Support From Base"
for additional context.
nids(4) was a clever idea in the early 2000's when the market was
flooded with 10/100 NICs with Windows-only drivers, but that hasn't been
the case for ages and the driver has had no meaningful maintenance in
ages. It only supports Windows-XP era drivers.
Also remove:
- ndis support from wpa_supplicant
- ndiscvt(8)
Reviewed By: emaste, bcr (manpages)
Differential Revision: https://reviews.freebsd.org/D27609
Currently only amd64, i386 and powerpc build VirtIO modules, yet all other
architectures have at least one kernel configuration that includes the
transport drivers, and so they lack drivers for all the devices they don't
statically compile into the kernel. Instead, enable the build everywhere so all
architectures have the full set of device drivers available.
Reviewed by: bryanv (earlier version), imp (earlier version)
Differential Revision: https://reviews.freebsd.org/D28058
This driver supports some arm and arm64 boards equipped with
"snps,dw-wdt"-compatible watchdog device.
Tested on RK3399-based board (RockPro64).
Once started watchdog device cannot be stopped.
Interrupt handler has mode to kick watchdog even when software does not do it
properly.
This can be controlled via sysctl: dev.dwwdt.prevent_restart.
Also - driver handles system shutdown and prevents from restart when system
is asked to reboot.
Submitted by: kjopek@gmail.com
Differential Revision: https://reviews.freebsd.org/D26761
This change introduces loadable fib lookup modules based on
DPDK rte_lpm lib targeted for high-speed lookups in large-scale tables.
It is based on the lookup framework described in D27401.
IPv4 module is called dpdk_lpm4. It wraps around rte_lpm [1] library.
This library implements variation of DIR24-8 [2] lookup algorithm.
Module provide lockless route lookups and in-place incremental updates,
allowing for good RIB performance.
IPv6 module is called dpdk_lpm6. It wraps around rte_lpm6 [3] library.
Implementation can be seen as multi-bit trie where the stride or number of bits
inspected on each level varies from level to level.
It can vary from 1 to 14 memory accesses, with 5 being the average value
for the lengths that are most commonly used in IPv6.
Module provide lockless route lookups for global unicast addresses
and in-place incremental updates, allowing for good RIB performance.
Implementation details:
* wrapper code lives in `sys/contrib/dpdk_rte_lpm/dpdk_lpm[6].c`.
* rte_lpm[6] implementation contains both RIB and FIB code.
. RIB ("rule_") code, backed by array of hash tables part has been commented out,
as base radix already provides all the necessary primitives.
* link-local lookups are currently implemented as base radix lookup.
This part should be converted to something like read-only radix trie.
Usage detail:
Compile kernel with option FIB_ALGO and load dpdk_lpm4/dpdk_lpm6
module at any time. They will be picked up automatically when
amount of routes raises to several thousand.
[1]: https://doc.dpdk.org/guides/prog_guide/lpm_lib.html
[2]: http://yuba.stanford.edu/~nickm/papers/Infocom98_lookup.pdf
[3]: https://doc.dpdk.org/guides/prog_guide/lpm6_lib.html
Differential Revision: https://reviews.freebsd.org/D27412
Remove wi(4). pccard is going away, and wi only supports PC Card
devices, though it has a minor amount of glue to also support
PCI cards. However, removing the one without removing the other
is hard, so the whole driver is being removed.
Relnotes: Yes
It will be used by the upcoming HID-over-i2C implementation. Should be
no-op, except hid.ko module dependency is to be added to affected drivers.
Reviewed by: hselasky, manu
Differential revision: https://reviews.freebsd.org/D27867
Only ACPI attachment is supported for now, some others depend on the
presence of smbios(4) support, which we lack on arm64.
Reviewed by: emaste
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D28009
The hme (Happy Meal Ethernet) driver was the onboard NIC in most
supported sparc64 platforms. A few PCI NICs do exist, but we have seen
no evidence of use on non-sparc systems.
Reviewed by: imp, emaste, bcr
Sponsored by: DARPA
Enable in-kernel acceleration of SHA1 and SHA2 operations on arm64 by adding
support for the ossl(4) crypto driver. This uses OpenSSL's assembly routines
under the hood, which will detect and use SHA intrinsics if they are
supported by the CPU.
Reviewed by: jhb
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D27390
This driver provides support for Realtek PCI SD card readers. It attaches
mmc(4) bus on card insertion and detaches it on card removal. It has been
tested with RTS5209, RTS5227, RTS5229, RTS522A, RTS525A and RTL8411B. It
should also work with RTS5249, RTL8402 and RTL8411.
PR: 204521
Submitted by: Henri Hennebert (hlh at restart dot be)
Reviewed by: imp, jkim
Differential Revision: https://reviews.freebsd.org/D26435
This provides an OpenCrypto driver for Intel QuickAssist devices. The
driver was initially ported from NetBSD and comes with a few
improvements:
- support for GMAC/AES-GCM, AES-CTR and AES-XTS, and support for
SHA/HMAC-authenticated encryption
- support for detaching the driver
- various bug fixes
- DH895X support
Discussed with: jhb
MFC after: 3 days
Sponsored by: Rubicon Communications, LLC (Netgate)
Differential Revision: https://reviews.freebsd.org/D26963
Currently, this supports SHA1 and SHA2-{224,256,384,512} both as plain
hashes and in HMAC mode on both amd64 and i386. It uses the SHA
intrinsics when present similar to aesni(4), but uses SSE/AVX
instructions when they are not.
Note that some files from OpenSSL that normally wrap the assembly
routines have been adapted to export methods usable by 'struct
auth_xform' as is used by existing software crypto routines.
Reviewed by: gallatin, jkim, delphij, gnn
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D26821
pvscsi and vmxnet3 build and work. Exclude vmci for now as it contains
x86-specific assembly.
Reported by: Vincent Milum Jr
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Compiling it with LLVM 10 triggers https://bugs.llvm.org/show_bug.cgi?id=44351
While LLVM 11 is the default compiler, I regularly build with
CROSS_TOOLCHAIN=llvm10 or use system packages for clang on Linux/macOS and
those have not been updated to 11 yet.
This patch has the driver for 10Gigabit Ethernet controller in AMD
SoC. This driver is written compatible to the Iflib framework. The
existing driver is for the old version of hardware. The submitted
driver here is for the recent versions of the hardware where the Ethernet
controller is PCI-E based.
Submitted by: Rajesh Kumar <rajesh1.kumar@amd.com>
MFC after: 1 month
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D25793
This is a simple subsystem that allow drivers to register as a backlight.
Each backlight creates a device node under /dev/backlight/backlightX and
an alias based on the name provided.
Relnotes: yes
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D26250
This is the initial set up for PowerPC64LE.
The current plan is for this arch to remain experimental for FreeBSD 13.
This started as a weekend learning project for me and kinda snowballed from
there.
(More to follow momentarily.)
Reviewed by: imp (earlier version), emaste
Sponsored by: Tag1 Consulting, Inc.
Differential Revision: https://reviews.freebsd.org/D26399
The primary benefit is maintaining a completely shared
code base with the community allowing FreeBSD to receive
new features sooner and with less effort.
I would advise against doing 'zpool upgrade'
or creating indispensable pools using new
features until this change has had a month+
to soak.
Work on merging FreeBSD support in to what was
at the time "ZFS on Linux" began in August 2018.
I first publicly proposed transitioning FreeBSD
to (new) OpenZFS on December 18th, 2018. FreeBSD
support in OpenZFS was finally completed in December
2019. A CFT for downstreaming OpenZFS support in
to FreeBSD was first issued on July 8th. All issues
that were reported have been addressed or, for
a couple of less critical matters there are
pull requests in progress with OpenZFS. iXsystems
has tested and dogfooded extensively internally.
The TrueNAS 12 release is based on OpenZFS with
some additional features that have not yet made
it upstream.
Improvements include:
project quotas, encrypted datasets,
allocation classes, vectorized raidz,
vectorized checksums, various command line
improvements, zstd compression.
Thanks to those who have helped along the way:
Ryan Moeller, Allan Jude, Zack Welch, and many
others.
Sponsored by: iXsystems, Inc.
Differential Revision: https://reviews.freebsd.org/D25872
Re-implement clocks for these SoC by using now standard extres/clk framework.
This is necessary for future expansion of these. The new implementation
is (due to the size of the patch) only the initial (minimum) version.
It will be updated/expanded with a subsequent set of particular patches.
This patch is also not tested on OMAP4 based boards (BeagleBone),
so all possible issues should be (and will be) fixed by ASAP once
identified.
Submited by: Oskar Holmlund (oskar.holmlund@ohdata.se)
Differential Revision: https://reviews.freebsd.org/D25118
MK_EFI was added to kern.opts.mk in r331099, but is currently unused.
Take advantage of that fact and gate the build of efirt behind it.
Reviewed by: imp
Differential Revision: https://reviews.freebsd.org/D24673
The EIP-97 is a packet processing module found on the ESPRESSObin. This
commit adds a crypto(9) driver for the crypto and hash engine in this
device. An initial skeleton driver that could attach and submit
requests was written by loos and others at Netgate, and the driver was
finished by me.
Support for separate AAD and output buffers will be added in a separate
commit, to simplify merging to stable/12 (where those features don't
exist).
Reviewed by: gnn, jhb
Feedback from: andrew, cem, manu
MFC after: 1 week
Sponsored by: Rubicon Communications, LLC (Netgate)
Differential Revision: https://reviews.freebsd.org/D25417
With this change, a kernel compiled with "options SCTP_SUPPORT" and
without "options SCTP" supports dynamic loading of the SCTP stack.
Currently sctp.ko cannot be unloaded since some prerequisite teardown
logic is not yet implemented. Attempts to unload the module will return
EOPNOTSUPP.
Discussed with: tuexen
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D21997
IPSEC_SUPPORT can currently only cope with either IPSEC || IPSEC_SUPPORT,
not both. Refrain from building if IPSEC is set, as the resulting module
won't be able to load anyways if it's built into the kernel.
KERN_OPTS is safe here; for tied modules, it will reflect the kernel
configuration. For untied modules, it will defer to whatever is set in
^/sys/conf/config.mk, which doesn't set IPSEC for modules. The latter
situation has some risk to it for uncommon scenarios, but such is the life
of untied kernel modules.
Reported by: jenkins (a lot), O. Hartmann (once)
Generally discussed with: imp, jhb
Honoring the kernel-supplied opt_ipsec.h in r361632 causes builds of
ipsec modules to fail if the kernel doesn't include IPSEC_SUPPORT.
However, the module can never be loaded into such a kernel, so only
build the modules if the kernel includes IPSEC_SUPPORT.
Reviewed by: imp
Differential Revision: https://reviews.freebsd.org/D25059
The ice(4) driver is the driver for the Intel E8xx series Ethernet
controllers; currently with codenames Columbiaville and
Columbia Park.
These new controllers support 100G speeds, as well as introducing
more queues, better virtualization support, and more offload
capabilities. Future work will enable virtual functions (like
in ixl(4)) and the other functionality outlined above.
For full functionality, the kernel should be compiled with
"device ice_ddp" like in the amd64 NOTES file, and/or
ice_ddp_load="YES" should be added to /boot/loader.conf so that
the DDP package file included in this commit can be downloaded
to the adapter. Otherwise, the adapter will fall back to a single
queue mode with limited functionality.
A man page for this driver will be forthcoming.
MFC after: 1 month
Relnotes: yes
Sponsored by: Intel Corporation
Differential Revision: https://reviews.freebsd.org/D21959
Assume gcc is at least 6.4, the oldest xtoolchain in the ports tree.
Assume clang is at least 6, which was in 11.2-RELEASE. Drop conditions
for older compilers.
Reviewed by: imp (earlier version), emaste, jhb
MFC after: 2 weeks
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D24802
This NFS lock device driver was replaced by the kernel NLM around FreeBSD7 and
has not normally been used since then.
To use it, the kernel had to be built without "options NFSLOCKD" and
the nfslockd.ko had to be deleted as well.
Since it uses Giant and is no longer used, this patch removes it.
With this device driver removed, there is now a lot of unused code
in the userland rpc.lockd. That will be removed on a future commit.
Reviewed by: kib
Differential Revision: https://reviews.freebsd.org/D22933
The devices supported by these drivers are obsolete ISA cards, and the
sync serial protocols they supported are essentially obsolete too.
Sponsored by: The FreeBSD Foundation
The ixl driver now works on PowerPC64 and may be compiled in-kernel and
as a module.
Reviewed by: alfredo, erj
Sponsored by: Eldorado Research Institute (eldorado.org.br)
Differential Revision: https://reviews.freebsd.org/D23974
Port aacraid driver to big-endian (BE) hosts.
The immediate goal of this change is to make it possible to use the
aacraid driver on PowerPC64 machines that have Adaptec Series 8 SAS
controllers.
Adapters supported by this driver expect FIB contents in little-endian
(LE) byte order. All FIBs have a fixed header part as well as a data
part that depends on the command being issued to the controller.
In this way, on BE hosts, the FIB header and all FIB data structures
used in aacraid.c and aacraid_cam.c need to be converted to LE before
being sent to the adapter and converted to BE when coming from it.
The functions to convert each struct are on aacraid_endian.c.
For little-endian (LE) targets, they are macros that expand
to nothing.
In some cases, when only a few fields of a large structure are used,
the fields are converted inline, by the code using them.
PR: 237463
Reviewed by: jhibbits
Sponsored by: Eldorado Research Institute (eldorado.org.br)
Differential Revision: https://reviews.freebsd.org/D23887
