Most consumers of g_metadata_store were passing in partially unallocated
memory, resulting in stack garbage being written to disk labels. Fix them by
zeroing the memory first.
gvirstor repeated the same mistake, but in the kernel.
Also, glabel's label contained a fixed-size string that wasn't
initialized to zero.
PR: 222077
Reported by: Maxim Khitrov <max@mxcrypt.com>
Reviewed by: cem
MFC after: 3 weeks
X-MFC-With: 323314
X-MFC-With: 323338
Differential Revision: https://reviews.freebsd.org/D14164
Mainly focus on files that use BSD 2-Clause license, however the tool I
was using misidentified many licenses so this was mostly a manual - error
prone - task.
The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.
No functional change intended.
'last' is the sector number of the last usable sector. Sector
numbers start with 0. As such, 'last' is always 1 less than
the count of sectors and aligning 'last' down as-is means that
the number of free sectors is pessimized by 'alignment - 1' if
the number of usable sectors was already a multiple of the
alignment. Consequently, gpart(8) failed to create a partition
when the alignment and size were such that it would extend to
the end of the disk.
partitioning scheme.
Users often get confused and frustrated when trying to delete partition
table and getting ``Device busy'' error because they forgot (or did not
ever know that they have) to delete all its partitions first, and while
the manual page mentions this briefly, it does not stress it out enough.
Approved by: ae, manpages (bjk)
PR (as inspiration): 196102
Differential Revision: https://reviews.freebsd.org/D12336
Any geom class using g_metadata_store, as well as geom_virstor which
duplicated g_metadata_store internally, would dump sectorsize - mdsize bytes
of userspace memory following the metadata block stored. This is most or all
geom classes (gcache, gconcat, geli, gjournal, glabel, gmirror, gmultipath,
graid3, gshsec, gstripe, and geom_virstor).
PR: 222077 (comment #3)
Reported by: Maxim Khitrov <max AT mxcrypt.com>
Reviewed by: des
Security: yes
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D12269
Before this change it was impossible to set number of PKCS#5v2 iterations,
required to set passphrase, if it has two keys and never had any passphrase.
Due to present metadata format limitations there are still cases when number
of iterations can not be changed, but now it works in cases when it can.
PR: 218512
MFC after: 2 weeks
Sponsored by: iXsystems, Inc.
Differential Revision: https://reviews.freebsd.org/D10338
An unhandled error case would result in passing SIZE_MAX to malloc.
While I'm here, remove an unnecessary NULL check before free
Reported by: Coverity
CID: 1017793
MFC after: 3 weeks
Sponsored by: Spectra Logic Corp
gpart(8) has functionality to change the label of an GPT partition.
This functionality works like it should, however, after a label change
the /dev/gpt/ entries remain unchanged. glabel(8) status output remains
unchanged. The change only takes effect after a reboot.
PR: 162690
Submitted by: sub.mesa@gmail, Ben RUBSON <ben.rubson@gmail.com>, ae
Reviewed by: allanjude, bapt, bcr
MFC after: 6 weeks.
Differential Revision: https://reviews.freebsd.org/D9935
It is quite specific mode of operation without storing on-disk metadata.
It can be useful in some cases in combination with some external control
tools handling mirror creation and disks hot-plug.
MFC after: 2 weeks
Sponsored by: iXsystems, Inc.
gmultipath.8: Add HISTORY
Adjust sentences with bad phrases picked up by igor
ggatec.8: Add HISTORY
ggated.8: Add HISTORY
ggatel.8: Add HISTORY
Seperate out sentence as advised by igor.
hastctl.8: Add HISTORY
hastd.8: Add HISTORY
Fix sentence highlighted by igor.
iscontrol.8: Add HISTORY
mdmfs.8: Add HISTORY
Address issues raised by igor
mount_nfs.8: Add HISTORY
Not sure where mount_nfs first showed up, but the verison used
in the BSD's originates from 4.4BSD according to CSRG archive.
Though commercial offerings from Sun and others covers older
systems, eg https://groups.google.com/forum/#!topic/net.unix-wizards/lMe7aQikqJI
nandfs.8: Add HISTORY
Adjust sentence in description to address bad phrase highlighted
by igor.
nvmecontrol.8: Add HISTORY
PR: 212491
PR: 212498
PR: 212499
PR: 212500
PR: 212501
PR: 212502
PR: 212505
PR: 212508
PR: 212540
PR: 212543
PR: 212546
Submitted by: Sevan Janiyan <venture37@geeklan.co.uk>
in one command due to wrong file size limit. Do not use bootcode size
to calculate partsize limit.
Also add report message about successful partcode writing.
Reported by: Trond Endrestøl
MFC after: 2 weeks
This flag indicates that the user wishes to use the GELIBOOT feature to boot from a fully encrypted root file system.
Currently, GELIBOOT does not support key files, and in the future when it does, they will be loaded differently.
Due to the design of GELI, and the desire for secrecy, the GELI metadata does not know if key files are used or not, it just adds the key material (if any) to the HMAC before the optional passphrase, so there is no way to tell if a GELI partition requires key files or not.
Since the GELIBOOT code in boot2 and the loader does not support keys, they will now only attempt to attach if this flag is set. This will stop GELIBOOT from prompting for passwords to GELIs that it cannot decrypt, disrupting the boot process
PR: 208251
Reviewed by: ed, oshogbo, wblock
Sponsored by: ScaleEngine Inc.
Differential Revision: https://reviews.freebsd.org/D5867
The upcoming GELI support in the loader reuses parts of this code
Some ifdefs are added, and some code is moved outside of existing ifdefs
The HMAC parts of GELI are broken out into their own file, to separate
them from the kernel crypto/openssl dependant parts that are replaced
in the boot code.
Passed the GELI regression suite (tools/regression/geom/eli)
Files=20 Tests=14996
Result: PASS
Reviewed by: pjd, delphij
MFC after: 1 week
Sponsored by: ScaleEngine Inc.
Differential Revision: https://reviews.freebsd.org/D4699
cperciva's libmd implementation is 5-30% faster
The same was done for SHA256 previously in r263218
cperciva's implementation was lacking SHA-384 which I implemented, validated against OpenSSL and the NIST documentation
Extend sbin/md5 to create sha384(1)
Chase dependancies on sys/crypto/sha2/sha2.{c,h} and replace them with sha512{c.c,.h}
Reviewed by: cperciva, des, delphij
Approved by: secteam, bapt (mentor)
MFC after: 2 weeks
Sponsored by: ScaleEngine Inc.
Differential Revision: https://reviews.freebsd.org/D3929
reads and writes.
PR: kern/198405
Submitted by: Matthew D. Fuller <fullermd at over-yonder dot net>
MFC after: 1 month
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D3679
it possible to "simulate" 4K media, to eg test alignment handling.
Reviewed by: mav@
MFC after: 1 month
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D3664
GELI is used on a SSD or inside virtual machine, so that guest can tell
host that it is no longer using some of the storage.
Enabling BIO_DELETE passthru comes with a small security consequence - an
attacker can tell how much space is being really used on encrypted device and
has less data no analyse then. This is why the -T option can be given to the
init subcommand to turn off this behaviour and -t/T options for the configure
subcommand can be used to adjust this setting later.
PR: 198863
Submitted by: Matthew D. Fuller fullermd at over-yonder dot net
This commit also includes a fix from Fabian Keil freebsd-listen at
fabiankeil.de for 'configure' on onetime providers which is not strictly
related, but is entangled in the same code, so would cause conflicts if
separated out.
Since METAMODE has been added, sys.mk loads bsd.mkopt.mk which ends load loading
bsd.own.mk which then defines SHLIBDIR before all the Makefile.inc everywhere.
This makes /lib being populated again.
Reported by: many
Off by default, build behaves normally.
WITH_META_MODE we get auto objdir creation, the ability to
start build from anywhere in the tree.
Still need to add real targets under targets/ to build packages.
Differential Revision: D2796
Reviewed by: brooks imp
