after allowing more than one address with the same prefix.
Reported by: Vladimir Grebenschikov <vova NO fbsd SPAM ru>
Submitted by: ru (also NetBSD rev. 1.83)
Pointyhat to: mlaier
queue a packet to the hardware... instead of when the hardware queue is
empty..
don't initalize cur_tx now that it doesn't need to be...
Pointed out by: bde
clock found on the ISA bus (some USIIe, USIIi and USIIIi models) and
EBus (USIII models) instead of a MK48Txx clock.
Testet by: Matthew T. Lager" <freebsd@trinetworks.com> on Sun Fire V100,
Xavier Beaudouin <kiwi@oav.net> on Netra X1 (initial version)
respective NetBSD driver for use with the genclock interface.
It's first use will be on sparc64 but it was also tested on alpha with
a preliminary patch to switch alpha to use the genclock code together
with this driver instead of the respective code in alpha/alpha/clock.c
and the rather MD mcclock(4). Using it on i386 and amd64 won't be that
hard but some changes/extensions to improve the genclock code in general
should be done first, e.g. add locking and make it easier to access the
NVRAM usually coupled with RTCs.
- The claim in the commit log of rev. 1.11 of dev/uart/uart_cpu_sparc64.c
etc. that UARTs are the only relevant ISA devices on sparc64 turned out
to be false. While there are sparc64 models where UARTs are the only
devices on the ISA bus there are in fact also low-cost models where all
devices traditionally found on the EBus are hooked up to the ISA bus.
There are also models that use a mix between EBus and ISA devices with
things like an AT keyboard controller and other rather interesting
devices that we might want to support in the futute hook up to the ISA
bus.
In order to not need to add sparc64 specific device_identify methods to
all of the respective ISA drivers and also not add OFW specific code to
the common ISA code make the sparc64 ISA bus code fake up PnP devices so
most ISA drivers probe their devices without further changes.
Unfortunately Sun doesn't adhere to the ISA bindings defined in IEEE
1275-1994 for the properties of most of the ISA devices which would
allow to obtain the vendor and logical IDs from their properties. So we
we just use a simple table which maps the name properties to PnP IDs.
This could be done in a more sophisticated way but I courrently don't
see the need for this. [1]
- Add the children with fully mapped and specified resources (in the OFW
sense) similar to what is done in the EBus code for the IRQ resources
of the children as adjusting the resources and the resource list entries
respectively in isa_alloc_resource() as done perviously causes trouble
with drivers which use rman_get_start(), pass-through or allocate and
release resources multiple times, etc.
Adjusting the resources might be better off in a bus_activate_resource
method but the common ISA code currently doesn't allow for an
isa_activate_resource(). [2]
With this change:
- ppbus(4) and lpt(4) attach and work (modulo ECP mode, which requires
real ISADMA code but it currently only consists of stubs on sparc64).
- atkbdc(4) and atkbdc(4) attach, no further testing done.
- fdc(4) itself attaches but causes a hang while attaching fd0 also
when is DMA disabled, further work in fdc(4) is required here as e.g.
fd0 uses the address of fd1 on sparc64 (not sure if sparc64 supports
more than one floppy drive at all).
All of these drivers previously caused panics in the sparc64 ISA code.
- Minor changes, e.g. use __FBSDID, remove a dupe word in a comment and
declare one global variable which isn't used outside of isa.c static.
o dev/uart/uart_cpu_sparc64.c and modules/uart/Makefile:
- Remove the code for registering the UARTs on the ISA bus from the
sparc64 uart_cpu_identify() again and rely on probing them via PnP.
Original idea by: tmm [1]
No objections by: tmm [1], [2]
away, instead only exit storming mode when an interrupt stops firing long
enough for the ithread to exit the loop and go back to sleep.
Tested by: macrus (cruder version)
MAC policies to perform object life cycle operations and access
control checks.
Submitted by: Dandekar Hrishikesh <rishi_dandekar at sbcglobal dot net>
Obtained from: TrustedBSD Project
Sponsored by: DARPA, SPAWAR, McAfee Research
message queues, shared memory segments, and semaphores), add a struct
label pointer, which will hold the MAC labels for the objects. As a
result of recent work to separate kernel and user space ABIs, this
should not break the ABI for applications using System V IPC, but will
require a rebuild of the ipcs monitoring tool.
Submitted by: Dandekar Hrishikesh <rishi_dandekar at sbcglobal dot net>
Obtained from: TrustedBSD Project
Sponsored by: DARPA, SPAWAR, McAfee Research
objects and operations:
- System V IPC message, message queue, semaphore, and shared memory
segment init, destroy, cleanup, create operations.
- System V IPC message, message queue, seamphore, and shared memory
segment access control entry points, including rights to attach,
destroy, and manipulate these IPC objects.
Submitted by: Dandekar Hrishikesh <rishi_dandekar at sbcglobal dot net>
Obtained from: TrustedBSD Project
Sponsored by: DARPA, SPAWAR, McAfee Research
I have in mind for the genclock interface):
- Recognize the MK48T18 as well (differs from the MK48T08 only in
packaging options and voltages).
- Allow MD code to provide functions for reading/writing NVRAM/RTC
locations.
If passed NULL, the old behaviour using bus_space_{read,write}_1() is
used. Otherwise, all access to the chip goes via the MD functions.
This is necessary for mvmeppc boards where the mk48txx NVRAM/RTC is
not directly addressable.
- Cleanup MI mk48txx(4) todclock driver:
- Prepare mk48txxvar.h and leave only register definitions in
mk48txxreg.h.
- Define struct mk48txx_softc as usual devices and allocate necessary
members in it.
- Change mk48txx_attach() to only take a device_t.
o While converting the sparc64 eeprom driver to the above changes:
- Remove some dead code and stale comments.
- Use the NVRAM size provided by the mk48txx driver instead of hardcoding
it as suggested by a comment.
- Add a comment about why it doesn't make much sense to read the hostid
directly from the NVRAM except for displaying it when attaching.
- Don't print the hostid if it reads all zero because it's stored
elsewhere.
hence bump it to 6.
Note that the last commit message was not quite accurate. While the
assumption exists in the code, it's not possible to have an
uninitialized p there because if lflag is set when username is NULL
then execution would be terminated earlier.
Don't grab Giant in the upper syscall/wrapper code
NET_LOCK_GIANT in the socket code (sockets/fifos).
mtx_lock(&Giant) in the vnode code.
mtx_lock(&Giant) in the opencrypto code. (This may actually not be
needed, but better safe than sorry).
Devfs grabs Giant if the driver is marked as needing Giant.
Don't grab Giant in the upper syscall/wrapper code
NET_LOCK_GIANT in the socket code (sockets/fifos).
mtx_lock(&Giant) in the vnode code.
Devfs grabs Giant if the driver is marked as needing Giant.
FILEDESC_LOCK_FAST will just grab the interlocking mutex and hold
it. This should be used for simple modifications of a field.
FILEDESC_LOCK holds a (homegrown) sleepable lock which should be used
where sleeping is required.
The homegrown lock will probably be replaced with a generic type of lock
once we have found out how that should look.
Help and reviews by: rwatson
- Allow the upload directory to be optional. If the upload directory
field is cleared to the empty string then no directory will be created.
- Don't create a bin/ subdirectory in ftp's home dir containing ls(1) and
date(1) as ftpd(8) no longer requires it.
- Create a pwd.db file in etc/ instead of a passwd file.
- Ignore NIS compat entries in /etc/group and /etc/master.passwd when
building the anonymous files.
PR: bin/60662
Submitted by: Olafur Osvaldsson oli at isnic dot is
after boot so that PCI is initialized and we can probe for the problem
chipsets. Note that while probed but unusable states are disabled, they
aren't freed yet. In the future, it may make sense to detach them.
Tested by: Adam K Kirchoff <adamk at voicenet com>
MFC after: 2 days
- Have TS_ZOMBIE ttys return POLLHUP instead of POLLERR
- Remove unneeded POLLWRNORM (old bug)
- TS_ZOMBIE ttys will set POLLIN and POLLRDNORM
- Do not call selrecord in TS_ZOMBIE ttys
PR: kern/73821
Reviewed by: bde
MFC after: 4 weeks
