allocated with a tag to come from the specified domain if it meets the
other constraints provided by the tag. Automatically create a tag at
the root of each bus specifying the domain local to that bus if
available.
Reviewed by: jhb, kib
Tested by: pho
Sponsored by: Netflix, Dell/EMC Isilon
Differential Revision: https://reviews.freebsd.org/D13545
Mainly focus on files that use BSD 2-Clause license, however the tool I
was using misidentified many licenses so this was mostly a manual - error
prone - task.
The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.
Also keep the calculated vm_page_alloc_contig() flags in the variable
to not re-evaluate it on the loop iteration.
Noted by: alc
Sponsored by: The FreeBSD Foundation
similar to the kernel memory allocator.
This simplifies NUMA allocation because the domain will be known at wait
time and races between failure and sleeping are eliminated. This also
reduces boilerplate code and simplifies callers.
A wait primitive is supplied for uma zones for similar reasons. This
eliminates some non-specific VM_WAIT calls in favor of more explicit
sleeps that may be satisfied without new pages.
Reviewed by: alc, kib, markj
Tested by: pho
Sponsored by: Netflix, Dell/EMC Isilon
remapping.
VT-d specification requires use of PCI rid as source id for IOAPICs
enumerated by PCI bus. The values from the DMAR ACPI table should be
only used when IOAPIC is not on PCI.
Reviewed by: jhb
Sponsored by: The FreeBSD Foundation
Hardware provided by: Intel
MFC after: 2 weeks
Differential revision: https://reviews.freebsd.org/D12205
--Remove special-case handling of sparc64 bus_dmamap* functions.
Replace with a more generic mechanism that allows MD busdma
implementations to generate inline mapping functions by
defining WANT_INLINE_DMAMAP in <machine/bus_dma.h>. This
is currently useful for sparc64, x86, and arm64, which all
implement non-load dmamap operations as simple wrappers
around map objects which may be bus- or device-specific.
--Remove NULL-checked bus_dmamap macros. Implement the
equivalent NULL checks in the inlined x86 implementation.
For non-x86 platforms, these checks are a minor pessimization
as those platforms do not currently allow NULL maps. NULL
maps were originally allowed on arm64, which appears to have
been the motivation behind adding arm[64]-specific barriers
to bus_dma.h, but that support was removed in r299463.
--Simplify the internal interface used by the bus_dmamap_load*
variants and move it to bus_dma_internal.h
--Fix some drivers that directly include sys/bus_dma.h
despite the recommendations of bus_dma(9)
Reviewed by: kib (previous revision), marius
Differential Revision: https://reviews.freebsd.org/D10729
Do not queue dmar_map_entries with zeroed gseq to
dmar_qi_invalidate_locked(). Zero gseq stops the processing in the qi
task. Do not assign possibly uninitialized on-stack gseq to map
entries when requeuing them on unit tlb_flush queue. Random garbage
in gsec is interpreted as too high invalidation sequence number and
again stop the processing in the task.
Make the sequence numbers generation completely contained in
dmar_qi_invalidate_locked() and dmar_qi_emit_wait_seq(). Upper code
directly passes boolean requesting emiting wait command instead of
trying to provide hint to avoid it by passing NULL gseq pointer.
Microoptimize the requeueing to tlb_flush queue by doing it for the
whole queue.
Diagnosed and tested by: Brett Gutstein <bgutstein@rice.edu>
Discussed with: alc
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Implement timeouts for register-based DMAR commands. Tunable/sysctl
hw.dmar.timeout specifies the timeout in nanoseconds, set it to zero
to allow infinite wait. Default is 1ms.
Runtime modification of the sysctl is not safe, it is allowed for
debugging.
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Kernel environment variable hw.busdma.default can take values 'bounce'
and 'dmar' and selects corresponding busdma backend as default.
Per-device environment variable hw.busdma.pci<domain>.<bus>.<slot>.<func>
takes the same values and overrides hw.busdma.default for the given device.
Note that even with hw.busdma.default=bounce, DMA translation engines
are still started if DMARs are enabled, to disable them use
hw.dmar.dma tunable, as before.
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
As noted in the comment, nothing special needs to be done to destroy
the unneeded context after the allocation race, but the context memory
itself still should to be freed.
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
It does not make sense since identity mapping already provides the
required mapping for RMRR ranges. More, since identity page tables do
not reflect content of map entries for id domains, creating RMRR
entries makes domain data inconsistent.
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
- Add constants for the fields in the root-entry table address register,
namely the root type type (RTT) and root table address (RTA) mask.
- Add macros for the bitmask of the domain ID field in the second word
of context table entries as well as a helper macro (DMAR_CTX2_GET_DID)
to extract the domain ID from a context table entry.
Reviewed by: kib
MFC after: 1 month
Sponsored by: Chelsio Communications
rounddown2 tends to produce longer lines than the original code
and when the code has a high indentation level it was not really
advantageous to do the replacement.
This tries to strike a balance between readability using the macros
and flexibility of having the expressions, so not everything is
converted.
which queued invalidation completion interrupt is requested with
regard to the queued invalidation requests. In other words, setting
the value of the knob to N requests completion interrupt after N items
are processed. Existing behaviour is restored by setting
hw.dmar.batch_coalesce=1.
The knob significantly decreases the DMAR qi interrupt rate at the
cost of slightly longer DMAR map entries recycling.
Sponsored by: The FreeBSD Foundation
taskqueue_enqueue() was changed to support both fast and non-fast
taskqueues 10 years ago in r154167. It has been a compat shim ever
since. It's time for the compat shim to go.
Submitted by: Howard Su <howard0su@gmail.com>
Reviewed by: sephe
Differential Revision: https://reviews.freebsd.org/D5131
acpi_GetInteger() execution. Intel DMAR interrupt remapping code
needs to know UID of the HPET to properly route the FSB interrupts
from the HPET, even when interrupt remapping is disabled, and the code
is executed under some non-sleepable mutexes.
Cache HPET UIDs in the device softc at the attach time and provide
lock-less method to get UID, use the method from the dmar hpet
handling code instead of calling GetInteger().
Reported and tested by: Larry Rosenman <ler@lerctr.org>
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
and related data structures. Contexts attach requests initiators to
domains. There is still 1:1 correspondence between contexts and
domains on the running system, since only busdma currently allocates
them, using dmar_get_ctx_for_dev().
Large part of the change is formal rename of the ctx to domain, but
patch also reworks the context allocation and free to allow for
independent domain creation.
The helper dmar_move_ctx_to_domain() is introduced for future use, to
reassign request initiator from one domain to another. The hard issue
which is not yet resolved with the context move is proper handling (or
reserving) RMRR entries in the destination domain as required by ACPI
DMAR table for moved context.
Tested by: pho
Sponsored by: The FreeBSD Foundation
buildkernel run.
Some of them were write-only under some kernel options, e.g. variables
keeping values only used by CTR() macros. It costs nothing to the
code readability and correctness to eliminate the warnings in those
cases too by removing the local cached values used only for
single-access.
Review: https://reviews.freebsd.org/D2665
Reviewed by: rodrigc
Looked at by: bjk
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
queue is started, not relying on the interrupt remaping method to
happen. Also disable interrupts when shooting down the queue.
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
dmar_map_entry. Non-zero offset both increases the required mapping
size, which is handled in dmar_bus_dmamap_load_something1(), and makes
it possible that allocated range crosses boundary, which needs a check
in dmar_gas_match_one().
Reported and tested by: jimharris
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
requested size. If tag restrictions caused split entry, its size is
less then requsted.
Hardware provided by: Michael Fuckner <michael@fuckner.net>
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
translation. In particular, despite IO-APICs only take 8bit apic id,
IR translation structures accept 32bit APIC Id, which allows x2APIC
mode to function properly. Extend msi_cpu of struct msi_intrsrc and
io_cpu of ioapic_intsrc to full int from one byte.
KPI of IR is isolated into the x86/iommu/iommu_intrmap.h, to avoid
bringing all dmar headers into interrupt code. The non-PCI(e) devices
which generate message interrupts on FSB require special handling. The
HPET FSB interrupts are remapped, while DMAR interrupts are not.
For each msi and ioapic interrupt source, the iommu cookie is added,
which is in fact index of the IRE (interrupt remap entry) in the IR
table. Cookie is made at the source allocation time, and then used at
the map time to fill both IRE and device registers. The MSI
address/data registers and IO-APIC redirection registers are
programmed with the special values which are recognized by IR and used
to restore the IRE index, to find proper delivery mode and target.
Map all MSI interrupts in the block when msi_map() is called.
Since an interrupt source setup and dismantle code are done in the
non-sleepable context, flushing interrupt entries cache in the IR
hardware, which is done async and ideally waits for the interrupt,
requires busy-wait for queue to drain. The dmar_qi_wait_for_seq() is
modified to take a boolean argument requesting busy-wait for the
written sequence number instead of waiting for interrupt.
Some interrupts are configured before IR is initialized, e.g. ACPI
SCI. Add intr_reprogram() function to reprogram all already
configured interrupts, and call it immediately before an IR unit is
enabled. There is still a small window after the IO-APIC redirection
entry is reprogrammed with cookie but before the unit is enabled, but
to fix this properly, IR must be started much earlier.
Add workarounds for 5500 and X58 northbridges, some revisions of which
have severe flaws in handling IR. Use the same identification methods
as employed by Linux.
Review: https://reviews.freebsd.org/D1892
Reviewed by: neel
Discussed with: jhb
Tested by: glebius, pho (previous versions)
Sponsored by: The FreeBSD Foundation
MFC after: 3 weeks
queue. They are for first-level translations and device TLB.
Review: https://reviews.freebsd.org/D1892
Reviewed by: neel
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
allocator tries to move the entry up, after the boundary. The new
location may still fail to satisfy boundary requirement, for instance,
if the boundary is set to page size, and allocation is of multiple
pages.
Recheck that boundary is not crossed after the move. If it is
crossed, give up on allocating the whole entry and split it.
Reported by: Michael Fuckner <michael@fuckner.net>, running nvme(4)
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
next entry does not intersect with the tail of the new entry, but also
that previous entry is also before new entry start.
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
follow specification and do not provide PCIe capability.
Verify if the port above such bridge is downstream PCIe (or root port)
and treat the bridge as PCIe/PCI then. This allows to avoid
maintaining the table of device ids for bridges without capability,
while still calculate correct request originator for devices behind
the bridge.
Submitted by: Jason Harmening <jason.harmening@gmail.com>
MFC after: 1 week
VT-d specification. Also add definitions for the interrupt remapping
table and IEC.
Print new capabilities on boot. although there is no hardware which
support it.
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
cache for whole page containing modified pte, and more, only last page
in the series of the consequtive pages is flushed (i.e. the affected
mappings should be larger than 2MB).
Avoid excessive flushing and do missed neccessary flushing, by
splitting invalidation and unmapping. For now, flush exactly the
range of the changed pte. This is still somewhat bigger than
neccessary, since pte is 8 bytes, while cache flush line is at least
32 bytes.
The originator of the issue reports that after the change,
'dmar_bus_dmamap_unload went from 13,288 cycles down to
3,257. dmar_bus_dmamap_load_buffer went from 9,686 cycles down to
3,517. and I am now able to get line 1GbE speed with Netperf TCP
(even with 1K message size).'
Diagnosed and tested by: Nadav Amit <nadav.amit@gmail.com>
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
In my case on the test machine, I have hierarchy of
pcib2 (PCIe port on host bridge with PCIe capability) -> pci2 ->
pcib3 (ITE PCIe/PCI bridge) -> pci3 -> em1
The device to check PCIe capability is pcib2 and not pcib3, as it is
currently done in the code. Also, in case of the bridge, we shall
step to pcib2 for the loop iteration, since pcib3 does not carry PCIe
capability info and would force wrong recalculation of rid.
Also change the returned requester to the PCIe bus which provides port
for the bridge. This only results in changing
hw.busdma.pciX.X.X.X.bounce tunable to force identity-mapped context
for the device.
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
after dmar driver was converted to use rids. The bus component to
calculate context page must be taken from the requestor rid, which is
a bridge, and not from the device bus number.
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
in userland rename in-kernel getenv()/setenv() to kern_setenv()/kern_getenv().
This fixes a namespace collision with libc symbols.
Submitted by: kmacy
Tested by: make universe
This includes:
o All directories named *ia64*
o All files named *ia64*
o All ia64-specific code guarded by __ia64__
o All ia64-specific makefile logic
o Mention of ia64 in comments and documentation
This excludes:
o Everything under contrib/
o Everything under crypto/
o sys/xen/interface
o sys/sys/elf_common.h
Discussed at: BSDcan
These changes prevent sysctl(8) from returning proper output,
such as:
1) no output from sysctl(8)
2) erroneously returning ENOMEM with tools like truss(1)
or uname(1)
truss: can not get etype: Cannot allocate memory
there is an environment variable which shall initialize the SYSCTL
during early boot. This works for all SYSCTL types both statically and
dynamically created ones, except for the SYSCTL NODE type and SYSCTLs
which belong to VNETs. A new flag, CTLFLAG_NOFETCH, has been added to
be used in the case a tunable sysctl has a custom initialisation
function allowing the sysctl to still be marked as a tunable. The
kernel SYSCTL API is mostly the same, with a few exceptions for some
special operations like iterating childrens of a static/extern SYSCTL
node. This operation should probably be made into a factored out
common macro, hence some device drivers use this. The reason for
changing the SYSCTL API was the need for a SYSCTL parent OID pointer
and not only the SYSCTL parent OID list pointer in order to quickly
generate the sysctl path. The motivation behind this patch is to avoid
parameter loading cludges inside the OFED driver subsystem. Instead of
adding special code to the OFED driver subsystem to post-load tunables
into dynamically created sysctls, we generalize this in the kernel.
Other changes:
- Corrected a possibly incorrect sysctl name from "hw.cbb.intr_mask"
to "hw.pcic.intr_mask".
- Removed redundant TUNABLE statements throughout the kernel.
- Some minor code rewrites in connection to removing not needed
TUNABLE statements.
- Added a missing SYSCTL_DECL().
- Wrapped two very long lines.
- Avoid malloc()/free() inside sysctl string handling, in case it is
called to initialize a sysctl from a tunable, hence malloc()/free() is
not ready when sysctls from the sysctl dataset are registered.
- Bumped FreeBSD version to indicate SYSCTL API change.
MFC after: 2 weeks
Sponsored by: Mellanox Technologies
Under the hood the VT-d spec is really implemented in terms of
PCI RIDs instead of bus/slot/function, even though the spec makes
pains to convert back to bus/slot/function in examples. However
working with bus/slot/function is not correct when PCI ARI is
in use, so convert to using RIDs in most cases. bus/slot/function
will only be used when reporting errors to a user.
Reviewed by: kib
MFC after: 2 months
Sponsored by: Sandvine Inc.
My PCI RID changes somehow got intermixed with my PCI ARI patch when I
committed it. I may have accidentally applied a patch to a non-clean
working tree. Revert everything while I figure out what went wrong.
Pointy hat to: rstone
Under the hood the VT-d spec is really implemented in terms of
PCI RIDs instead of bus/slot/function, even though the spec makes
pains to convert back to bus/slot/function in examples. However
working with bus/slot/function is not correct when PCI ARI is
in use, so convert to using RIDs in most cases. bus/slot/function
will only be used when reporting errors to a user.
Reviewed by: kib
Sponsored by: Sandvine Inc.
bridge takes ownership of the transaction, so bsf of the requester is
the bridge and not a device behind it. As result, code needs to walk
the hierarchy up to use correct context.
Note that PCIe->PCI-X bridges are not handled quite correctly since
such bridges are allowed to only take ownership of some transactions.
Also, weird but unrealistic cases of PCIe behind PCI bus are also not
handled.
Still, the patch provides significant step forward for the bridge
handling.
Submitted by: Jason Harmening <jason.harmening@gmail.com>
MFC after: 1 week
table. Among them, some (old AMI ?) BIOSes report entries with range
like (bf7ec000, bf7ebfff). Attempts to ignore the bogus entries
result in faults, so the range must be covered somehow.
Provide a workaround by identity mapping the 32 pages after the bogus
entry start, which seems to be enough for the reported BIOS.
Reported and tested by: Jason Harmening <jason.harmening@gmail.com>
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
shifts into the sign bit. Instead use (1U << 31) which gets the
expected result.
This fix is not ideal as it assumes a 32 bit int, but does fix the issue
for most cases.
A similar change was made in OpenBSD.
Discussed with: -arch, rdivacky
Reviewed by: cperciva
Right now, the semaphore write is scheduled after each batch, which is
not optimal and must be tuned.
Discussed with: alc
Tested by: pho
MFC after: 1 month
1.3 of Intelб╝ Virtualization Technology for Directed I/O Architecture
Specification. The Extended Context and PASIDs from the rev. 2.2 are
not supported, but I am not aware of any released hardware which
implements them. Code does not use queued invalidation, see comments
for the reason, and does not provide interrupt remapping services.
Code implements the management of the guest address space per domain
and allows to establish and tear down arbitrary mappings, but not
partial unmapping. The superpages are created as needed, but not
promoted. Faults are recorded, fault records could be obtained
programmatically, and printed on the console.
Implement the busdma(9) using DMARs. This busdma backend avoids
bouncing and provides security against misbehaving hardware and driver
bad programming, preventing leaks and corruption of the memory by wild
DMA accesses.
By default, the implementation is compiled into amd64 GENERIC kernel
but disabled; to enable, set hw.dmar.enable=1 loader tunable. Code is
written to work on i386, but testing there was low priority, and
driver is not enabled in GENERIC. Even with the DMAR turned on,
individual devices could be directed to use the bounce busdma with the
hw.busdma.pci<domain>:<bus>:<device>:<function>.bounce=1 tunable. If
DMARs are capable of the pass-through translations, it is used,
otherwise, an identity-mapping page table is constructed.
The driver was tested on Xeon 5400/5500 chipset legacy machine,
Haswell desktop and E5 SandyBridge dual-socket boxes, with ahci(4),
ata(4), bce(4), ehci(4), mfi(4), uhci(4), xhci(4) devices. It also
works with em(4) and igb(4), but there some fixes are needed for
drivers, which are not committed yet. Intel GPUs do not work with
DMAR (yet).
Many thanks to John Baldwin, who explained me the newbus integration;
Peter Holm, who did all testing and helped me to discover and
understand several incredible bugs; and to Jim Harris for the access
to the EDS and BWG and for listening when I have to explain my
findings to somebody.
Sponsored by: The FreeBSD Foundation
MFC after: 1 month
