Commit Graph

96 Commits

Author SHA1 Message Date
John Baldwin
3b0a4aef96 Do a sweep of the tree replacing calls to pci_find_extcap() with calls to
pci_find_cap() instead.
2011-03-23 13:10:15 +00:00
David Christensen
9510c63d8b - Updated firmware which improves small packet performance.
MFC after:	2 weeks
2011-02-11 00:41:49 +00:00
David Christensen
08266a07e3 - Added error checking to nvram read functions.
- Minor style updates.

Submitted by:	gcooper@freebsd.org
MFC after:	2 weeks
2011-02-10 22:36:23 +00:00
David Christensen
2306fc3f4c - Added systcls for header splitting, RX/TX buffer count, interrupt
coalescing, strict RX MTU, verbose output, and shared memory debug.
- Added additional debug counters (VLAN tags and split header frames).
- Updated debug counters to 64 bit definitions.
- Updated l2fhdr bit definitions.
- Combined RX buffer sizing into a single function.
- Added buffer size and interrupt coalescing settings to adapter info
  printout.

Submitted by:	davidch
MFC after:	2 weeks
2011-02-07 23:00:24 +00:00
Matthew D Fleming
6dc7dc9a3e sysctl(9) cleanup checkpoint: amd64 GENERIC builds cleanly.
Commit the rest of the devices.
2011-01-12 19:53:56 +00:00
Marius Strobl
efd4fc3fb3 o Flesh out the generic IEEE 802.3 annex 31B full duplex flow control
support in mii(4):
  - Merge generic flow control advertisement (which can be enabled by
    passing by MIIF_DOPAUSE to mii_attach(9)) and parsing support from
    NetBSD into mii_physubr.c and ukphy_subr.c. Unlike as in NetBSD,
    IFM_FLOW isn't implemented as a global option via the "don't care
    mask" but instead as a media specific option this. This has the
    following advantages:
    o allows flow control advertisement with autonegotiation to be
      turned on and off via ifconfig(8) with the default typically
      being off (though MIIF_FORCEPAUSE has been added causing flow
      control to be always advertised, allowing to easily MFC this
      changes for drivers that previously used home-grown support for
      flow control that behaved that way without breaking POLA)
    o allows to deal with PHY drivers where flow control advertisement
      with manual selection doesn't work or at least isn't implemented,
      like it's the case with brgphy(4), e1000phy(4) and ip1000phy(4),
      by setting MIIF_NOMANPAUSE
    o the available combinations of media options are readily available
      from the `ifconfig -m` output
  - Add IFM_FLOW to IFM_SHARED_OPTION_DESCRIPTIONS and IFM_ETH_RXPAUSE
    and IFM_ETH_TXPAUSE to IFM_SUBTYPE_ETHERNET_OPTION_DESCRIPTIONS so
    these are understood by ifconfig(8).
o Make the master/slave support in mii(4) actually usable:
  - Change IFM_ETH_MASTER from being implemented as a global option via
    the "don't care mask" to a media specific one as it actually is only
    applicable to IFM_1000_T to date.
  - Let mii_phy_setmedia() set GTCR_MAN_MS in IFM_1000_T slave mode to
    actually configure manually selected slave mode (like we also do in
    the PHY specific implementations).
  - Add IFM_ETH_MASTER to IFM_SUBTYPE_ETHERNET_OPTION_DESCRIPTIONS so it
    is understood by ifconfig(8).
o Switch bge(4), bce(4), msk(4), nfe(4) and stge(4) along with brgphy(4),
  e1000phy(4) and ip1000phy(4) to use the generic flow control support
  instead of home-grown solutions via IFM_FLAGs. This includes changing
  these PHY drivers and smcphy(4) to no longer unconditionally advertise
  support for flow control but only if the selected media has IFM_FLOW
  set (or MIIF_FORCEPAUSE is set) and implemented for these media variants,
  i.e. typically only for copper.
o Switch brgphy(4), ciphy(4), e1000phy(4) and ip1000phy(4) to report and
  set IFM_1000_T master mode via IFM_ETH_MASTER instead of via IFF_LINK0
  and some IFM_FLAGn.
o Switch brgphy(4) to add at least the the supported copper media based on
  the contents of the BMSR via mii_phy_add_media() instead of hardcoding
  them. The latter approach seems to have developed historically, besides
  causing unnecessary code duplication it was also undesirable because
  brgphy_mii_phy_auto() already based the capability advertisement on the
  contents of the BMSR though.
o Let brgphy(4) set IFM_1000_T master mode on all supported PHY and not
  just BCM5701. Apparently this was a misinterpretation of a workaround
  in the Linux tg3 driver; BCM5701 seem to require RGPHY_1000CTL_MSE and
  BRGPHY_1000CTL_MSC to be set when configuring autonegotiation but
  this doesn't mean we can't set these as well on other PHYs for manual
  media selection.
o Let ukphy_status() report IFM_1000_T master mode via IFM_ETH_MASTER so
  IFM_1000_T master mode support now is generally available with all PHY
  drivers.
o Don't let e1000phy(4) set master/slave bits for IFM_1000_SX as it's
  not applicable there.

Reviewed by:	yongari (plus additional testing)
Obtained from:	NetBSD (partially), OpenBSD (partially)
MFC after:	2 weeks
2010-11-14 13:26:10 +00:00
Marius Strobl
d6c65d276e Converted the remainder of the NIC drivers to use the mii_attach()
introduced in r213878 instead of mii_phy_probe(). Unlike r213893 these
are only straight forward conversions though.

Reviewed by:	yongari
2010-10-15 15:00:30 +00:00
Pyun YongHyeon
96486faa6e Make sure to not use stale ip/tcp header pointers. The ip/tcp
header parser uses m_pullup(9) to get access to mbuf chain.
m_pullup(9) can allocate new mbuf chain and free old one if the
space left in the mbuf chain is not enough to hold requested
contiguous bytes. Previously drivers can use stale ip/tcp header
pointer if m_pullup(9) returned new mbuf chain.

Reported by:	Andrew Boyer (aboyer <> averesystems dot com)
MFC after:	10 days
2010-10-14 18:31:40 +00:00
Doug Ambrisko
584d21f69e Add the capability to read the complete contents of the NVRAM via sysctl
dev.bce.<unit>.nvram_dump
Add the capability to write the complete contents of the NVRAM via sysctl
	dev.bce.<unit>.nvram_write
These are only available if the kernel option BCE_DEBUG is enabled.
The nvram_write sysctl also requires the kernel option
BCE_NVRAM_WRITE_SUPPORT to be enabled.  These are to be used at your
own caution.  Since the MAC addresses are stored in the NVRAM, if you
dump one NIC and restore it on another NIC the destination NIC's
MAC addresses will not be preserved.  A tool can be made using these
sysctl's to manage the on-chip firmware.

Reviewed by:	davidch, yongari
2010-10-06 18:36:50 +00:00
Jung-uk Kim
954022384f Fix an apparent typo.
Found by:	clang
Reviewed by:	davidch, yongari
2010-07-26 23:24:42 +00:00
Pyun YongHyeon
ad09ad06bc Specify BCE_RX_BUF_ALIGN alignment for RX buffers. All bce(4)
controllers require RX buffers aligned on BCE_RX_BUF_ALIGN bytes.

Reviewed by:	davidch
2010-07-19 23:48:03 +00:00
Pyun YongHyeon
3016d3fe4e Specify BUS_DMA_ZERO flag to bus_dmamem_alloc(9) and remove bzero()
calls. Also add BUS_DMA_COHERENT flag to bus_dmamem_alloc(9) to
take advantage of efficient synchronization for architectures that
support that feature.

Reviewed by:	davidch
2010-07-19 23:41:45 +00:00
Pyun YongHyeon
6351e52fcf Use bus_get_dma_tag() to get parent tag. Also use
BUS_SPACE_MAXSIZE_32BIT to specify sum of all segment lengths.
Previously it used MAXBSIZE which was wrong.

Reviewed by:	davidch
2010-07-19 23:35:43 +00:00
Pyun YongHyeon
b18d9d4b15 Add KASSERT to check number of returned DMA segments.
Reviewed by:	davidch
2010-07-19 23:25:19 +00:00
Pyun YongHyeon
c87831d8f4 Do not report current link state if interface is not UP.
Reviewed by:	davidch
2010-07-19 21:41:54 +00:00
Pyun YongHyeon
f8bfabe733 Correctly check the result of media selection. Previously it always
returned success.

Reviewed by:	davidch
2010-07-19 21:38:07 +00:00
Pyun YongHyeon
a3e063e20d Don't change current media in bce_stop(). There is no need to do
this here.

Reviewed by:	davidch
2010-07-19 21:32:47 +00:00
Pyun YongHyeon
68de78a5fa Have bce_init_ctx() return error code and make caller check the
return code. If context was not setup correctly give up
initialization. While I'm here move variable declarations to the
beginning of the function.

Reviewed by:	davidch
2010-07-19 21:25:05 +00:00
Pyun YongHyeon
5c4ac8ba07 When we didn't find a matching flash device, do not touch flash
config data. While I'm here, use return code of bce_init_nvram()
to set error instead of directly setting ENODEV.

Reviewed by:	davidch
2010-07-19 21:13:07 +00:00
Fabien Thomas
b92990ef88 Add a fastpath to allocate from packet zone when using m_getjcl.
This will add support for packet zone for at least igb and ixgbe
and will avoid to check for that in bce and mxge.

MFC after: 1 week
2010-05-07 22:09:17 +00:00
David Christensen
7c409214bf - Enable flow control.
- Print device details only when verbose boot is enabled.
- Add debug output for shared memory access.
- Add debug statistics (checksum offload & VLAN frame counters).
- Modify TX path to update consumer index for each frame completed
  rather than updating the consumer index only once for a group of
  frames to improve small packet performance.
- Print driver/firmware pulse messages only when verbose boot
  is enabled.
- Add debug sysctl to clear statistics.
- Fix more style(9) violations.

MFC after:	2 weeks
2010-04-30 02:35:46 +00:00
David Christensen
e1188c28b3 - Fixed 5708S 2.5G support broken in last commit.
- Added some new debug helper routines to systcl.
- Fixed many of the style(9) violations that have crept into the code
  due to my use of a "smart" editor.

MFC after:	2 weeks
2010-04-06 12:44:28 +00:00
David Christensen
c8331f5c12 - Added support for 5709S/5716S PHYs.
- Update copyright to 2010.
- Add new debug code for RV2P block.
- Improve output formatting for various debug functions.

MFC after:	2 weeks
2010-03-18 21:00:53 +00:00
Pyun YongHyeon
6401cf0ccc Add TSO support on VLANs. bce(4) controllers require VLAN hardware
tagging to make TSO work on VLANs so explicitly disable TSO on VLAN
if VLAN hardware tagging is disabled.

Reviewed by:	davidch
2010-02-26 21:26:07 +00:00
Pyun YongHyeon
c3b399103c Move TSO setup to new function bce_tso_setup(). Also remove VLAN
parsing code in TSO path as the controller requires VLAN hardware
tagging to make TSO work over VLANs.
While parsing the mbuf in TSO patch, always perform check for
writable mbuf as bce(4) have to reset IP length and IP checksum
field of IP header and make sure to ensure contiguous buffer before
accessing IP/TCP headers. While I'm here replace magic number 40 to
more readable sizeof(struct ip) + sizeof(struct tcphdr).

Reviewed by:	davidch
2010-02-26 21:19:46 +00:00
Pyun YongHyeon
80a48895fc Prefer m_collapse(9) over m_defrag(9).
Reviewed by:	davidch
2010-02-26 20:41:28 +00:00
Pyun YongHyeon
b2ec4a73f5 Make toggling TSO, VLAN hardware checksum offloading work. Also fix
TX/RX checksum handler to set/clear relavant assist bits which was
used to cause unexpected results.
With this change, bce(4) can be bridged with other interfaces that
lack TSO, VLAN checksum offloading.

Reviewed by:	davidch
2010-02-26 20:39:07 +00:00
Pyun YongHyeon
03c28f4ef5 Make sure to stop controller first before changing MTU. And if
interface is not running don't initialize controller.
While here remove unnecessary update of error variable.

Reviewed by:	davidch
2010-02-26 20:26:17 +00:00
Pyun YongHyeon
e89abed364 Allow disabling VLAN hardware tag stripping with software work
around. Management firmware(ASF/IPMI/UMP) requires the VLAN
hardware tag stripping so don't actually disable VLAN hardware tag
stripping. If VLAN hardware tag stripping was disabled, bce(4)
manually reconstruct VLAN frame by appending stripped VLAN tag.
Also remove unnecessary IFCAP_VLAN_MTU message.

Reviewed by:	davidch
2010-02-26 20:17:17 +00:00
David Christensen
bff0eb4e5c - Added a workaround for NC-SI management firmware that would allow
frames to be accepted while the driver is resetting the hardware.
  This failure is generally observed when broadcast frames are received
  during driver load and will generate "Unable to write CTX memory"
  errors.
- Small changes to driver flags display.
2010-01-20 20:33:10 +00:00
Stanislav Sedov
a0d600845e - Introduce new option BCE_JUMBO_HDRSPLIT that allows user to enable header
splitting in bce(4) instead of (ab)using ZERO_COPY_SOCKETS that was not
  propagated into if_bce.c anyway.  It is disabled by default.

Approved by:	davidch
MFC after:	3 days
2009-10-21 12:47:09 +00:00
Poul-Henning Kamp
6778431478 Revert previous commit and add myself to the list of people who should
know better than to commit with a cat in the area.
2009-09-08 13:19:05 +00:00
Poul-Henning Kamp
b34421bf9c Add necessary include. 2009-09-08 13:16:55 +00:00
Robert Watson
eb956cd041 Use if_maddr_rlock()/if_maddr_runlock() rather than IF_ADDR_LOCK()/
IF_ADDR_UNLOCK() across network device drivers when accessing the
per-interface multicast address list, if_multiaddrs.  This will
allow us to change the locking strategy without affecting our driver
programming interface or binary interface.

For two wireless drivers, remove unnecessary locking, since they
don't actually access the multicast address list.

Approved by:	re (kib)
MFC after:	6 weeks
2009-06-26 11:45:06 +00:00
David Christensen
d037d7aed6 - Added code to read bootcode firwmare version.
- Created dedicated shared memory access routines.

MFC after:	One week
2009-06-23 22:19:27 +00:00
Xin LI
ab7b2d927c DMA synchronization fixes:
- In bce_rx_intr(), use BUS_DMASYNC_POSTREAD instead of
   BUS_DMASYNC_POSTWRITE, as we want to "read" from the
   rx page chain pages.
 - Document why we need to do PREWRITE after we have updated
   the rx page chain pages.
 - In bce_intr(), use BUS_DMASYNC_POSTREAD and
   BUS_DMASYNC_PREREAD when before and after CPU "reading"
   the status block.
 - Adjust some nearby style mismatches/etc.

Pointed out by:	yongari
Approved by:	davidch (no objection) but bugs are mine :)
2009-05-18 01:51:52 +00:00
David Christensen
8ef3f835d2 - Fixed incorrect packet length problem caused be earlier change to
support ZERO_COPY_SOCKETS.
- Created #define for context initialization retry count.

MFC after:	1 week
2009-05-08 22:20:45 +00:00
David Christensen
725e9bc78c - Updated firmware to latest 4.6.X release.
- Added missing firmware for 5709 A1 controllers.
- Changed some debug statistic variable names to be more consistent.

Submitted by:	davidch
MFC after:	Two weeks
2009-03-04 00:05:40 +00:00
David Christensen
0e38e31f49 - Update copyright to 2009.
- Only enable split header operation when ZERO_COPY_SOCKETS is enabled in
  the kernel.

Submitted by:	davidch
MFC after:	1 week
2009-02-27 19:25:06 +00:00
Xin LI
bf55aadcb9 Changes to match "Marketing Description" from Broadcom for HP servers.
Submitted by:	davidch
MFC after:	2 months
2009-01-15 22:28:05 +00:00
Xin LI
d337638129 Remove intermediate variable busaddr and have bus_* operate directly on
softc members upon initialization.

Reviewed by:	davidch
MFC after:	1 month
2009-01-13 23:46:45 +00:00
Xin LI
c47f7fff79 Add several HP OEM parts' PCI IDs.
MFC after:	2 months
2009-01-13 07:12:32 +00:00
Xin LI
204cbef71b Don't count InFramesL2FilterDiscards into Ierr. This value does not represent
a real packet error but simply indicate that an unexpected unicast or multicast
error was received by the NIC, which was not counted in the past as well.

Reported by:	many (on -stable@)
Reviewed by:	davidch
MFC after:	3 days
2008-12-16 05:03:22 +00:00
Xin LI
6fca90a0f9 Test whether sc->tx_mbuf_map[i], not whether sc->tx_mbuf_map is NULL before
doing bus_dmamap_sync() since it operates on the former, not the latter.

Reviewed by:	davidch
2008-12-16 04:59:04 +00:00
Xin LI
2dd5c73163 Don't attempt to clear status updates if we did not do a link state
change.  As a side effect, this makes the excessive interrupts to
disappear which has been observed as a regression in recent stable/7.

Reported by:	many (on -stable@)
Reviewed by:	davidch
2008-12-03 23:00:00 +00:00
Kip Macy
db7f0b974f - bump __FreeBSD version to reflect added buf_ring, memory barriers,
and ifnet functions

- add memory barriers to <machine/atomic.h>
- update drivers to only conditionally define their own

- add lockless producer / consumer ring buffer
- remove ring buffer implementation from cxgb and update its callers

- add if_transmit(struct ifnet *ifp, struct mbuf *m) to ifnet to
  allow drivers to efficiently manage multiple hardware queues
  (i.e. not serialize all packets through one ifq)
- expose if_qflush to allow drivers to flush any driver managed queues

This work was supported by Bitgravity Inc. and Chelsio Inc.
2008-11-22 05:55:56 +00:00
Xin LI
202f306c24 Correct a logic error when testing BCE_PHY_SERDES_FLAG.
PR:		kern/128801
Pointed out by:	Adam Morrison
Ok'ed by:	davidch
MFC after:	3 days
2008-11-19 03:24:35 +00:00
David Christensen
b6d57579a2 - Updated support for 5716.
- Added some additional code for debug builds.
- Fixed a problem printing physical memory on 64bit system during debugging.
- Modified some of the context memory and mailbox register names to more
  clearly distinguish their use.
- Added memory barriers for Intel CPUs when accessing host memory data
  structures which are written by hardware.

MFC after:	Two weeks.
2008-08-27 18:47:24 +00:00
David Christensen
7752e34d05 - Added support for BCM5709 and BCM5716 controllers.
MFC after:	2 weeks
2008-06-13 01:16:37 +00:00
David Christensen
680ece5918 - Fixed kern/123696 by increasing firmware timeout value from 100 to 1000.
- Fixed a problem on i386 architecture when using split header/jumbo frame
  firmware caused by hardware alignment requirements.
- Added #define BCE_USE_SPLIT_HEADER to allow the feature to be enabled/
  disabled.  Enabled by default.

PR:		kern/123696
MFC after:	2 weeks
2008-06-10 02:19:11 +00:00