Add missed unistd.h include. Not sure where it was lost; I believe it
compiled before I submitted the change.
PR: 224503
Reported by: Cy Schubert <Cy.Schubert AT komquats.com>
Sponsored by: Dell EMC Isilon
syslog(3), routines used in write_warmstart(), and exit(3) are all
signal-unsafe. Instead, set a signal-safe flag and check the flag in the
rpcbind main loop to shutdown safely.
PR: 224503
Reviewed by: kib, markj
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D13728
This removes the direct WME info access in the ieee80211com struct and instead
provides a method of fetching the data. Right now it's a no-op but eventually
it'll turn into a per-VAP method for drivers that support it (eg iwn, iwm,
upcoming ath10k work) as things like p2p support require this kind of behaviour.
Tested:
* ath(4), STA and AP mode
TODO:
* yes, this is slightly stack size-y, but it is an important first step
to get drivers migrated over to a sensible WME API. A lot of per-phy things
need to be converted to per-VAP before P2P, 11ac firmware, etc stuff shows up.
The original bug describes it best:
When an absolute time is specified to shutdown, the program's
behavior depends on whether that time has passed during the
current calendar day. POLA would suggest that for shutdown,
whose time argument is always supposed to be in the future,
absolute times specified without a specific date should refer
to the next occurrence of that time, rather than erroring out
if that time has already passed during the current day.
PR: 32411
Submitted by: wollman@khavrinen.lcs.mit.edu
Submitted on: 2001-11-30 20:30:01 UTC
Reviewed by: asmodai (at time of bug submission)
Some users, especially those that are new, might be confused when passwd
does not echo anything. Inform users that the password will not be
visible.
PR: 196113
Submitted by: Byron Grobe <grobe0ba@gmail.com>
It does not change anything in the behavior of trap_pfault(), while
eliminating obfuscation of jumping to the code which checks for the
condition reversed of the goto cause. Also avoid force initialize the
rv variable, since it is now only accessed after storing vm_fault()
return value.
Reviewed by: alc
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D13725
On a load where single anonymous object consumes almost all memory on
the large system, swapout code executes the iteration over the
corresponding object page queue for long time, owning the map and
object locks. This blocks pagedaemon which tries to lock the object,
and blocks other threads in the process in vm_fault() waiting for the
map lock.
Handle the issue by terminating the deactivation loop if we executed
too long and by yielding at the top level in vm_daemon.
Reported by: peterj, pho
Reviewed by: alc
Tested by: pho (as part of the larger patch)
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D13671
is now unobtanium. It's only had API changes in the last 7 years, and
is responsible for a very large number of them. In addition, there's a
lot of code that reimplements base FreeBSD functionality, diminishing
the chances it still works. Without hardware to teset it on, or
prospects of obtaining such hardware and without vendor support, it's
time to move on.
Suggested by: kan@ in mips@ retirement discussion
it's at least 5 years out of production. I couldn't find a used one on
ebay and other secondary markets just now, nor when I tried 4 years
ago. It dates from the initial project/mips2 merge 8 years ago, and
hasn't been updated since.
Discussed on: mips@ (with some dissent)
It came into the tree with the project/mips merge 8 years ago. At the
time, it was hard to find a board with enough RAM to run. Now FreeBSD
requires at least 2x the RAM it did then. No changes have happened to
this port apart from API churn and license tagging since then. It ran
OK at the time it was committed, but no sightings in the wild have
happened since shortly after it was committed.
https://www.linux-mips.org/wiki/Adm5120_devices lists a bunch of
boards that were available 5 years ago (but are no longer
available). The beefiest one had only 64MB of RAM which is too
small. The Mirktik RB1xx never had more than 32MB.
Also remove confusing QEMU config file that never ever worked in QEMU
for mips. MALTA is used for that. Another of my past mistakes, false
starts that never amounted to anything.
Discussed on: mips@ (with some dissent)
never got better. It never worked on real hardware and is still mostly
stubs after 8 years when I added it. It has had no real update in that
time apart from API churn. It was added just so it didn't get lost in
the project/mips merge, but maybe it should have been lost as nothing
has come of it. It is time to give up the ghost on this one.
Approved by: me, shooting my own dog
Discussed on: mips@
This copies changes from NetBSD into FreeBSD's man page. I compared the
proposed changes against FreeBSD headers and modified them to match.
PR: 214602
Submitted by: fehmi noyan isi <fnoyanisi@yahoo.com>
bool indicating whether the input value represents a valid BCD byte.
The existing bcd2bin() routine will KASSERT if asked to convert a bad value,
but sometimes the kernel has to handle BCD data from untrusted sources, so
this will provide a mechanism to validate data before attempting conversion.
This would be have easier/cleaner if the bcd2bin_data[] array contained an
out-of-range value (such as 0xff) in the infill locations that aren't valid,
but it's a global symbol that might be referenced by out-of-tree code
relying on the current scheme, so I'm leaving that alone.
Newer Allwinner SoCs have nearly identical SID controllers with efuse space
starting at 0x200 into their register space and thermal data available at
0x234, making all of these fairly trivial additions.
The h3 will be added at a later time after some testing, due to a silicon
bug that causes the rootkey (at least) to be read incorrectly unless first
read via the control register.
Implement the 'p' flag for newsyslog from NetBSD. This flag results in
the first log file for a given file to not be compressed.
While here, don't change file attributes during a no-op run
PR: 162798
Submitted by: heas@shrubbery.net
MFC After: 1 month
introduction in r83366. (At that time, this code appeared in vm/vm_glue.c,
because vm/vm_swapout.c did not exist.) When the FOREACH_THREAD loop
completes, we know that the sleep time for every thread is above whichever
threshold is being applied.
Reviewed by: kib
X-MFC with: r327354
During review iterations function signature has changed in definition
but not in actual call. Fix call to match the definition.
Reported by: Herbert J. Skuhra
Pointyhat to: gonzo
MFC after: 2 weeks
This is necessary because some non-kernel code #defines _KERNEL and then
includes kernel headers; as a result, it was getting conflicting versions
of curthread and curproc. Non-kernel code should probably refrain from
defining _KERNEL, but for now hiding these indirect inclusions fixes the
build.
Reported by: Michael Butler, Herbert J. Skuhra
is of limited utility outside of platform-specific code and can vary
at runtime when running as a hypervisor guest, so does not even have the
virtue of being a static identifier.
Reviewed by: jhibbits
Introduce new set of loader tunables kern.vt.color.N.rgb, where N is a
number from 0 to 15. The value is either comma-separated list decimal
numbers ranging from 0 to 255 that represent values of red, green, and
blue components respectively (i.e. "128,128,128") or 6-digit hex triplet
commonly used to represent colors in HTML or xterm settings (i.e. #808080)
Each tunable overrides one of the 16 hardcoded palette codes and can be set
in loader.conf(5)
Reviewed by: bcr(docs), jilles, manu, ray
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D13645
A comment in Makefile.inc1 has long stated that LOCAL_DIRS are built last,
after the base system. Incremental improvements in parallel building over
the years have led to LOCAL_DIRS being built in parallel with base system
directories. This change allows the .WAIT directive to appear in LOCAL_DIRS
and LOCAL_LIB_DIRS lists to give the user some control over parallel
building of local additions.
Differential Revision: https://reviews.freebsd.org/D13622
are places where the "main thread" of the booting kernel (either the
thread which later becomes swapper or the thread which later becomes
init) has to stop and wait for action to take place in another thread
before continuing.
There are currently three such holds:
1. The intr_config_hooks SYSINIT waits for hooks registered via the
config_intrhook_establish function; this allows (typically) devices
which need interrupts enabled to complete their initialization to do
so before root is mounted.
2. The g_waitidle function waits for the GEOM event queue to be empty;
this ensures that all of the disks which have been attached have been
tasted before we attempt to mount root.
3. The vfs_mountroot_wait function (in addition to calling g_waitidle)
waits for holds registered via root_mount_hold; among other things, this
is used by the USB subsystem to ensure that we don't fail to mount root
if it's located on a USB disk which takes a while to probe.
METHOD and STATICMETHOD declarations; that code will be inserted
into the dispatch function before and after the method call.
Use this functionality and the TSLOG framework to record DEVICE_ATTACH
and DEVICE_PROBE entry/exit timestamps.
