Commit Graph

227011 Commits

Author SHA1 Message Date
Bryan Drewery
b12371422a META_MODE: Follow-up r319593: Don't use host headers in a fresh new build.
Sponsored by:	Dell EMC Isilon
2017-10-25 21:46:30 +00:00
Bryan Drewery
59696d216c Prefix {TARGET,BUILD}_TRIPLE with LLVM_ to avoid Makefile.inc1 collision.
The Makefile.inc1 TARGET_TRIPLE is for specifying which -target is used
during the build of world.

MFC after:	2 weeks
Reviewed by:	dim, imp
Sponsored by:	Dell EMC Isilon
Differential Revision:	https://reviews.freebsd.org/D12792
2017-10-25 21:45:55 +00:00
Kristof Provost
a0bf3ee425 Evaluate packet size after the firewall had its chance in the ip6 fast path
Defer the packet size check until after the firewall has had a look at it. This
means that the firewall now has the opportunity to (re-)fragment an oversized
packet.
This mirrors what the slow path does.

Reviewed by:	ae
MFC after:	1 week
Differential Revision:	https://reviews.freebsd.org/D12779
2017-10-25 19:21:48 +00:00
Emmanuel Vadot
7562d7ddbd loader.efi: Make framebuffer commands available for arm64
Move framebuffer.{c,h} to sys/boot/efi/loader and add the efifb
related metadata and pass it to the kernel

Reviewed by:	imp, andrew
Differential Revision:	https://reviews.freebsd.org/D12757
2017-10-25 18:55:04 +00:00
Sean Bruno
3de0952fba Enable i386 build of the Cavium LiquidIO driver (lio) module.
Submitted by:	pkanneganti@cavium.com (Prasad V Kanneganti)
MFC after:	1 week
Sponsored by:	Cavium Networks
Differential Revision:	https://reviews.freebsd.org/D12415
2017-10-25 17:49:17 +00:00
John Baldwin
54cfb29e3a Add a test for sending a signal while stepping a thread via PT_STEP.
MFC after:	1 week
2017-10-25 17:23:33 +00:00
Mark Johnston
4c52a9993b Make drain_output() use bufobj_wwait().
No functional change intended.

Reviewed by:	kib
MFC after:	1 week
Differential Revision:	https://reviews.freebsd.org/D12790
2017-10-25 17:20:18 +00:00
Alan Somers
63f8025d6a Fix zpool_read_all_labels when vfs.aio.enable_unsafe=0
Previously, zpool_read_all_labels was trying to do 256KB reads, which are
greater than the default MAXPHYS and therefore must go through the slow,
unsafe AIO path.  Shrink these reads to 112KB so they can use the safe, fast
AIO path instead.

MFC after:	1 week
X-MFC-With:	324568
Sponsored by:	Spectra Logic Corp
2017-10-25 16:01:19 +00:00
Warner Losh
1170c2fecc Implement IPMI support for RB_POWRECYCLE
Some BMCs support power cycling the chassis via the chassis control
command 2 subcommand 2 (ipmitool called it 'chassis power cycle').  If
the BMC supports the chassis device, register a shutdown_final handler
that sends the power cycle command if request and waits up to 10s for
it to take effect. To minimize stack strain, we preallocate a ipmi
request in the softc. At the moment, we're verbose about what we're
doing.

Sponsored by: Netflix
2017-10-25 15:30:53 +00:00
Warner Losh
6a9fbe3a70 Handle RB_POWERCYCLE in ada driver
Allow the disks to be spun down when doing a POWERCYCLE as well as
POWEROFF.

Sponsored by: Netflix
2017-10-25 15:30:48 +00:00
Warner Losh
7d41b6f078 Handle RB_POWERCYCLE in the MI part of the kernel
Signal init with SIGWINCH in shutdown_nice for RB_POWERCYCLE.

Sponsored by: Netflix
2017-10-25 15:30:44 +00:00
Warner Losh
35c1d16e3e Implement power cycle in init.
If SIGWINCH is received, then halt with power cycle.

Sponsored by: Netflix
2017-10-25 15:30:40 +00:00
Warner Losh
7d7d9013f1 Add power cycle support to reboot/halt as -c.
When -c is specified, the system will be power cycled if the
underlying hardware supports it. Otherwise the system will be halted
or rebooted depending on which command was used.

Sponsored by: Netflix
2017-10-25 15:30:35 +00:00
Warner Losh
e60baa7252 Add power cycle support (-c) to shutdown.
Sponsored by: Netflix
2017-10-25 15:30:30 +00:00
Warner Losh
dae8f61f5b RB_POWERCYCLE needs to be handled like RB_POWEROFF for decoding.
Sponsored by: Netflix
2017-10-25 15:30:25 +00:00
Warner Losh
06828ffb88 Define RB_POWERCYCLE
RB_POWERCYCLE instructs the platform to power off and then power back
on a short time later, if that's possible. Otherwise, degrade to the
RB_POWEROFF behavior.

Sponsored by: Netflix
2017-10-25 15:30:20 +00:00
Warner Losh
e1b6a0cd96 Remove sys/boot/arm/at91 and ixp425
Remove at91 bootloader. It only worked on AT91RM9200, and only
specific boards that were all EOLd 10 years ago.

Remove ixp425. It doesn't build anymore and is for boards that were
EOLd 8 years ago.

Sponsored by: Netflix
2017-10-25 15:28:05 +00:00
Warner Losh
b533f63ed0 Move BINDIR definition to defs.mk, and override where it isn't /boot
(those files already do that so weren't changed).

Sponsored by: Netflix
2017-10-25 15:27:58 +00:00
Warner Losh
2125122d25 Use BOOTDIR consistently. We need to include bsd.init.mk early to make
this happen. This will cause src.opts.mk to be included, so remove
that. This needs to propigate through the sys/boot tree.

Sponsored by: Netflix
2017-10-25 15:27:53 +00:00
Warner Losh
9bd6ac8da0 Do a chdir to SRCTOP/sys/boot before starting the run. This lets one
run this script from anywhere, but makes it only work on sys/boot.

Sponsored by: Netflix
2017-10-25 15:27:48 +00:00
Warner Losh
24e99dabf7 Report only the valid slots in the firmware log page.
Printing the entire log page is causing confusion over available
slots. Report only those slots that are valid. In the case where the
firmware download isn't supported, assume that only the first slot is
valid (I have no hardware to test this assumption though)

Sponsored by: Netflix
2017-10-25 15:26:03 +00:00
Warner Losh
8ce85adf7d Add nvme_controller_data argument to all print functions.
It's desirable to access controler data to inform printing log pages
(such as limiting the printing to valid ranges).

Sponsored by: Netflix
2017-10-25 15:25:55 +00:00
Konstantin Belousov
24e470ef9c Limit top display of total swap size by the max swap size system can
handle.

Keep both pagesize and the new swap_maxpages in the static variables
to save sysctl calls.

Submitted by:	ota@j.email.ne.jp
PR:	223149
MFC after:	2 weeks
2017-10-25 11:44:46 +00:00
Michael Tuexen
8d9b040dd4 Fix a bug reported by Felix Weinrank using the libfuzzer on the
userland stack.

MFC after:	3 days
2017-10-25 09:12:22 +00:00
Mark Johnston
64a16434d8 Add support for compressed kernel dumps.
When using a kernel built with the GZIO config option, dumpon -z can be
used to configure gzip compression using the in-kernel copy of zlib.
This is useful on systems with large amounts of RAM, which require a
correspondingly large dump device. Recovery of compressed dumps is also
faster since fewer bytes need to be copied from the dump device.

Because we have no way of knowing the final size of a compressed dump
until it is written, the kernel will always attempt to dump when
compression is configured, regardless of the dump device size. If the
dump is aborted because we run out of space, an error is reported on
the console.

savecore(8) is modified to handle compressed dumps and save them to
vmcore.<index>.gz, as it does when given the -z option.

A new rc.conf variable, dumpon_flags, is added. Its value is added to
the boot-time dumpon(8) invocation that occurs when a dump device is
configured in rc.conf.

Reviewed by:	cem (earlier version)
Discussed with:	def, rgrimes
Relnotes:	yes
Sponsored by:	Dell EMC Isilon
Differential Revision:	https://reviews.freebsd.org/D11723
2017-10-25 00:51:00 +00:00
Stephen Hurd
7b79d6d61a bnxt: add support for Flow control setting using sysctl
Created sysctl node dev.bnxt.0.fc with following options.

A. dev.bnxt.0.fc.autoneg
B. dev.bnxt.0.fc.rx
C. dev.bnxt.0.fc.tx

Description:-
dev.bnxt.0.fc: flow ctrl
dev.bnxt.0.fc.autoneg: Enable or Disable Autoneg Flow Ctrl: 0 / 1
dev.bnxt.0.fc.rx: Enable or Disable Rx Flow Ctrl: 0 / 1
dev.bnxt.0.fc.tx: Enable or Disable Tx Flow Ctrl: 0 / 1

Submitted by:	Bhargava Chenna Marreddy <bhargava.marreddy@broadcom.com>
Reviewed by:	shurd, sbruno
Approved by:	sbruno (mentor)
Sponsored by:	Broadcom Limited
Differential Revision:	https://reviews.freebsd.org/D12599
2017-10-24 21:18:50 +00:00
Fedor Uporov
ffbde5ea28 Fix physical block number overflow in different places.
Approved by:    pfg (mentor)
MFC after:      6 months
2017-10-24 20:10:08 +00:00
Fedor Uporov
dc262e5bc2 Set doreallocblks sysctl value to zero by default because of
possibility of filesystem corruption.

Approved by:    pfg (mentor)
MFC after:      2 weeks
2017-10-24 19:16:25 +00:00
Fedor Uporov
f0a993bbdb Do not free bufs in case of extents metadata blocks + remove unneeded asserts.
Approved by:    pfg (mentor)
MFC after:      6 months
2017-10-24 19:14:33 +00:00
Alan Cox
3a757e5403 Micro-optimize the handling of fictitious pages in vm_page_free_prep().
A fictitious page is always wired, so there is no point in trying to
remove one from the page queues.

Completely remove one inaccurate comment from vm_page_free_prep() and
correct another.

Reviewed by:	kib, markj
MFC after:	1 week
2017-10-24 17:14:53 +00:00
Ruslan Bukin
d27927f731 Extract a set of pmcstat functions and interfaces to the new internal
library -- libpmcstat.

This includes PMC logging module, symbols lookup functions,
ELF parsing, process management, PMC attachment, etc.

This allows to reuse code while building new hwpmc(4)-based applications.

Also add pmcstat_symbol_search_by_name() function that allows to find
mapped IP range for a given function name.

Reviewed by:	kib
Sponsored by:	DARPA, AFRL
Differential Revision:	https://reviews.freebsd.org/D12718
2017-10-24 16:28:00 +00:00
Michael Tuexen
701492a5f6 Fix a bug in handling special ABORT chunks.
Thanks to Felix Weinrank for finding this issue using libfuzzer with
the userland stack.

MFC after:	3 days
2017-10-24 16:24:12 +00:00
Andriy Gapon
e54fb4ff8c iscsi_shutdown_post: do nothing if panic-ing
There is nothing that that routine should or could really do in that
context.

Reported by:	Ben RUBSON <ben.rubson@gmail.com>
MFC after:	1 week
2017-10-24 14:59:31 +00:00
Alan Somers
42b22a3e74 Bump man page revision dates for r324941
Reported by:	jhb
MFC after:	20 days
X-MFC-with:	324941
Sponsored by:	Spectra Logic Corp
2017-10-24 14:34:25 +00:00
Michael Tuexen
adc59f7f46 Fix a locking issue found by running AFL on the userland stack.
Thanks to Felix Weinrank for reporting the issue.

MFC after:	3 days
2017-10-24 14:28:56 +00:00
Edward Tomasz Napierala
b4ed9a87f9 Remove unneeded calls to access(2) from rtld(1); just call open(2) instead.
The result looks like this:

--- przed       2017-10-21 23:19:21.445034000 +0100
+++ po  2017-10-21 23:18:50.031865000 +0100
@@ -11,7 +11,6 @@ mmap(0x0,102,PROT_READ,MAP_PRIVATE,3,0x0)      = 343665418
 close(3)                                        = 0 (0x0)
 open("/usr/local/etc/libmap.d",O_RDONLY|O_NONBLOCK|O_DIRECTORY|O_CLOEXEC,0165) ERR#2 'No such file or directory'
 munmap(0x80067d000,102)                                 = 0 (0x0)
-access("/usr/local/lib/libintl.so.8",F_OK)      = 0 (0x0)
 openat(AT_FDCWD,"/usr/local/lib/libintl.so.8",O_RDONLY|O_CLOEXEC|O_VERIFY,00) = 3 (0x3)
 fstat(3,{ mode=-rw-r--r-- ,inode=642560,size=55188,blksize=32768 }) = 0 (0x0)
 mmap(0x0,4096,PROT_READ,MAP_PRIVATE|MAP_PREFAULT_READ,3,0x0) = 34366541824 (0x80067d000)
@@ -20,14 +19,13 @@ mmap(0x800877000,40960,PROT_READ|PROT_EXEC,MAP_PRIVATE
 mmap(0x800a81000,4096,PROT_READ|PROT_WRITE,MAP_PRIVATE|MAP_FIXED|MAP_PREFAULT_READ,3,0xa000) = 34370752512 (0x800a81000)
 munmap(0x80067d000,4096)                        = 0 (0x0)
 close(3)                                        = 0 (0x0)
-access("/usr/local/lib/libc.so.7",F_OK)                 ERR#2 'No such file or directory'
+openat(AT_FDCWD,"/usr/local/lib/libc.so.7",O_RDONLY|O_CLOEXEC|O_VERIFY,00) ERR#2 'No such file or directory'
 openat(AT_FDCWD,"/var/run/ld-elf.so.hints",O_RDONLY|O_CLOEXEC,00) = 3 (0x3)
 read(3,"Ehnt\^A\0\0\0\M^@\0\0\0\M-2\0\0"...,128) = 128 (0x80)
 fstat(3,{ mode=-r--r--r-- ,inode=970684,size=306,blksize=32768 }) = 0 (0x0)
 lseek(3,0x80,SEEK_SET)                          = 128 (0x80)
 read(3,"/lib:/usr/lib:/usr/lib/compat:/u"...,178) = 178 (0xb2)
 close(3)                                        = 0 (0x0)
-access("/lib/libc.so.7",F_OK)                   = 0 (0x0)
 openat(AT_FDCWD,"/lib/libc.so.7",O_RDONLY|O_CLOEXEC|O_VERIFY,00) = 3 (0x3)
 fstat(3,{ mode=-r--r--r-- ,inode=1605239,size=1910320,blksize=32768 }) = 0 (0x0)
 mmap(0x0,4096,PROT_READ,MAP_PRIVATE|MAP_PREFAULT_READ,3,0x0) = 34366541824 (0x80067d000)

Reviewed by:	kib
MFC after:	2 weeks
Sponsored by:	DARPA, AFRL
Differential Revision:	https://reviews.freebsd.org/D12766
2017-10-24 12:56:08 +00:00
Edward Tomasz Napierala
2fe071d971 Replace lseek(2)/read(2) pair with pread(2), removing yet another syscall
from the binary startup code.

MFC after:	2 weeks
Sponsored by:	DARPA, AFRL
2017-10-24 12:04:07 +00:00
Edward Tomasz Napierala
1689a3c4ac Make find_library() conform to style(9). No functional changes.
Suggested by:	kib
MFC after:	2 weeks
Sponsored by:	DARPA, AFRL
2017-10-24 11:24:54 +00:00
Edward Tomasz Napierala
e65ad973b2 Reword the conditional; it was ugly, and adding another parameter,
which I'm going to do in a subsequent commit, would make it even uglier.
No functional changes.

MFC after:	2 weeks
Sponsored by:	DARPA, AFRL
2017-10-24 11:16:38 +00:00
Edward Tomasz Napierala
a8b31c14d2 Use xmalloc and read(2) instead of mmap(2) to read in libmap.conf(5).
This removes the need to call munmap(2) afterwards.

MFC after:	2 weeks
Sponsored by:	DARPA, AFRL
Differential Revision:	https://reviews.freebsd.org/D12767
2017-10-24 10:48:26 +00:00
Andrey V. Elsukov
5c70ebfa57 Add IPv6 support for O_TCPDATALEN opcode.
PR:		222746
MFC after:	1 week
2017-10-24 08:39:05 +00:00
Navdeep Parhar
5bcae8ddfa cxgbe(4): Read the MPS buffer group map from the firmware as it could be
different from hardware defaults.  The congestion channel map, which is
still fixed, needs to be tracked separately now.  Change the congestion
setting for TOE rx queues to match the drivers on other OSes while here.

MFC after:	2 weeks
Sponsored by:	Chelsio Communications
2017-10-24 05:41:48 +00:00
Warner Losh
6ca2fb6623 Treat a 'current' value of 0 as unlimited as a failsfe.
When limiting I/O, a value of 0 makes no sense as a limit. No progress
can be made. Trade the possibility that someone might be doing
something clever to achieve ultra-low I/O limits vs the damage of not
ever making progress on an I/O in favor of making progress. Now the
machine won't be useless if this accidentally gets requested.

Sponsored by: Netflix
2017-10-24 02:25:42 +00:00
Alan Somers
913b932900 Remove artificial restriction on lio_listio's operation count
In r322258 I made p1003_1b.aio_listio_max a tunable. However, further
investigation shows that there was never any good reason for that limit to
exist in the first place. It's used in two completely different ways:

* To size a UMA zone, which globally limits the number of concurrent
  aio_suspend calls.

* To artifically limit the number of operations in a single lio_listio call.
  There doesn't seem to be any memory allocation associated with this limit.

This change does two things:

* Properly names aio_suspend's UMA zone, and sizes it based on a new constant.

* Eliminates the artifical restriction on lio_listio. Instead, lio_listio
  calls will now be limited by the more generous max_aio_queue_per_proc. The
  old p1003_1b.aio_listio_max is now an alias for
  vfs.aio.max_aio_queue_per_proc, so sysconf(3) will still work with
  _SC_AIO_LISTIO_MAX.

Reported by:	bde
Reviewed by:	jhb
MFC after:	3 weeks
Sponsored by:	Spectra Logic Corp
Differential Revision:	https://reviews.freebsd.org/D12120
2017-10-23 23:12:01 +00:00
Alan Somers
659058b06f Fix the error message when creating a zpool on a too-small device
Don't check for SPA_MINDEVSIZE in vdev_geom_attach when opening by path.
It's redundant with the check in vdev_open, and failing to attach here
results in the wrong error message being printed.  However, still check for
it in some other situations:

* When opening by guids, so we don't get bogged down reading from slow
  devices like floppy drives.
* In vdev_geom_read_pool_label for the same reason, because we iterate over
  all providers.
* If the caller requests that we verify the guid, because then we'll have to
  read from the device before vdev_open verifies the size.

PR:		222227
Reported by:	Marie Helene Kvello-Aune <marieheleneka@gmail.com>
Reviewed by:	avg, mav
MFC after:	3 weeks
Sponsored by:	Spectra Logic Corp
Differential Revision:	https://reviews.freebsd.org/D12531
2017-10-23 23:05:29 +00:00
Dimitry Andric
cc718496a9 After jemalloc was updated to version 5.0.0 in r319971, i386 executables
linked with AddressSanitizer (even those linked on earlier versions of
FreeBSD, or with external versions of clang) started failing with errors
similar to:

  ==14688==AddressSanitizer CHECK failed:
  /usr/src/contrib/compiler-rt/lib/asan/asan_poisoning.cc:36
  "((AddrIsAlignedByGranularity(addr))) != (0)" (0x0, 0x0)

This is because AddressSanitizer expects all the TLS data in the program
to be aligned to at least 8 bytes.

Before the jemalloc 5.0.0 update, all the TLS data in the i386 version
of libc.so added up to 80 bytes (a multiple of 8), but 5.0.0 made this
grow to 2404 bytes (not a multiple of 8).  This is due to added caching
data in jemalloc's internal struct tsd_s.

To fix AddressSanitizer, ensure this struct is aligned to at least 16
bytes, which can be done unconditionally for all architectures.  (An
earlier version of the fix aligned the struct to 8 bytes, but only for
ILP32 architectures.  This was deemed unnecessarily complicated.)

PR:		221337
X-MFC-With:	r319971
2017-10-23 21:31:04 +00:00
Stephen Hurd
3429c02f82 Some cache related optimizations
1. prefetch 128 bytes of mbufs.
2. Re-order filling the pkt_info so cache stalls happen at the end
3. Define empty prefetch2cachelines() macro when the function isn't present.

Provides small performance improvments on some hardware

Reviewed by:	sbruno
Approved by:	sbruno (mentor)
Sponsored by:	Limelight Networks
Differential Revision:	https://reviews.freebsd.org/D12447
2017-10-23 20:50:08 +00:00
Ed Maste
aa86fca1d1 uefi.8: mention use on (32-bit) arm
Sponsored by:	The FreeBSD Foundation
2017-10-23 20:32:18 +00:00
Enji Cooper
fcc46733b3 Clean up trailing whitespace
MFC after:	1 week
2017-10-23 16:55:22 +00:00
Enji Cooper
df6a67d624 Remove dead stores
The return value of various snprintf calls was stored in `len` and not used
in many functions.

MFC after:	1 week
Reported by:	clang-scanbuild
2017-10-23 16:54:30 +00:00