Commit Graph

513 Commits

Author SHA1 Message Date
Jordan K. Hubbard
11851b0ee1 Removed FAT_CURSOR as default since it breaks certain CGA displays
and it is better to conform to the lowest common denominator.
Those wishing to retain it can always use options FAT_CURSOR in
their config files.
1993-10-08 21:21:59 +00:00
Rodney W. Grimes
09f07fb057 All:
Remove patch kit headers, and add $Id$
	This is mostly to align some more code with NetBSD.

cpu.h:
	Remove the old function vs. include configuration stuff that was
	ifdefed out when we went to inline functions.
	Remove the define of resettodr that made it a nop, there is
	already a function that makes it a nop, no need to #define one.
	Remove the #defines of processor types, they are now defined
	in cputypes.h, #include that file.
	Add struct cpu_nameclass for support of cpu types.

frame.h:
	include sys/signal.h, it will be needed in the future.
	put the sigframe structure here that was in machdep.c

pcb.h:
	Add multiple inclusion protection.
	Add pcb_ldt and pcb_ldt_len to pcb structure, this is for the
	user mode ldt.
1993-10-08 20:51:00 +00:00
Rodney W. Grimes
3409a2f663 All:
removed patch kit headers and sccsids, add $Id$.  This is a general
	clean up and reallignment with NetBSD-current where possible.

genassym.c:
	removed extranious include of reg.h
	removed old FP_* defines that have been ifdefed out since the patch kit
	removed PCB_SIGC that is not referenced anywhere
	add trapframe and sigframe defines
	add KERNBASE define for use in locore.s

locore.s:
	include npx.h and use NNPX for turning on and off FPU
	include machine/cputypes.h for the types of cpu (used in cpu_identify)
	change SYSPDREND to be one higher, this is really the base of the
	next area, and will be changing again next time I revise the file
	Reverse the NOP defines, you now get slow NOP's by default, this
	may be what is casuing us trouble with some systems.  If you want
	the NOPS to be null you now need to have options DUMMY_NOPS.
	Now get esym from the boot blocks which don't pass it yet, and
	it is not used, but this will be changing.
	Move the bit_colors stuff to be in with the rest of Bruces SHOW_A_LOT
	things for debugging.
	Added NetBSD's CPU type probe code, we now know what type of CPU
	we are running on.
	Adjust kernel pde calcuation to correct for change in SYSPDREND, no
	longer need the +1.

machdep.c
	include npx.h and use NNPX for turning on and off FPU
	include isa.h, map.h(new file), exec.h in preperation for
	changes that are still in process.
	Add some of the code for MACHINE_NONCONTIG that will alow us
	to better map around the BIOS memory area.
	Now print the version, cpu id, real memory and availiable memory
	during boot.
	Correct the calculation of bufpages, the code was mixing pages
	and bytes, it now does the right things.  Removed Bill's hack
	for limiting the erronous calculation.
	add the identifycpu print out code from NetBSD.
	remove the definition of the sigframe struct, it belongs in
	frame.h
	put in printf's about syncing disks on a halt/reboot.
	Change the halted message to be a little easier reading.
	Clean up of the dump messages, makes the source and the output
	much more readable.
	Change 0,0 in several places to have spaces after the commas.
1993-10-08 20:45:12 +00:00
Rodney W. Grimes
bb9b7f49b4 Remove the ``loader overlaps bss, kernel must bzero'' printf since that
is so often reported as an error condition when it is not.  We print the
size of things so for those who want to know if this happened they can
figure it out from the size information that is printed.
1993-10-08 20:19:23 +00:00
Rodney W. Grimes
f87a326945 >From NetBSD
Change the cpu "i386" line to 2 lines:
cpu "I386_CPU"
cpu "I486_CPU"
This is so we can do real CPU classification of code.

Fix missing depend for assym.s which does depend on genassym.c
1993-10-08 16:52:45 +00:00
Rodney W. Grimes
3225c4b443 Define the types of cpu's there are, from NetBSD 1993-10-08 13:40:54 +00:00
Rodney W. Grimes
c77ba36045 Fix definitions to be in terms of a minimum number of constants by
using the SHIFT value as the basis for the other values, for example
instead of:
#define		NBPG		4096
#define		PGSHIFT		12
use:
#define		PGSHIFT		12
#define		NBPG		(1 << PGSHIFT)

===================================================================
RCS file: /a/cvs/386BSD/src/sys/i386/include/param.h,v
retrieving revision 1.3
diff -c -r1.3 param.h
*** 1.3	1993/10/08 12:49:55
--- param.h	1993/10/08 12:53:19
***************
*** 52,76 ****
  #define ALIGNBYTES	(sizeof(int) - 1)
  #define ALIGN(p)	(((u_int)(p) + ALIGNBYTES) &~ ALIGNBYTES)

- #define	NBPG		4096		/* bytes/page */
- #define	PGOFSET		(NBPG-1)	/* byte offset into page */
  #define	PGSHIFT		12		/* LOG2(NBPG) */
  #define	NPTEPG		(NBPG/(sizeof (struct pte)))

- #define NBPDR		(1024*NBPG)	/* bytes/page dir */
- #define	PDROFSET	(NBPDR-1)	/* byte offset into page dir */
  #define	PDRSHIFT	22		/* LOG2(NBPDR) */

  #define	KERNBASE	0xFE000000	/* start of kernel virtual */
  #define	BTOPKERNBASE	((u_long)KERNBASE >> PGSHIFT)

! #define	DEV_BSIZE	512
  #define	DEV_BSHIFT	9		/* log2(DEV_BSIZE) */
  #define BLKDEV_IOSIZE	2048
  #define	MAXPHYS		(64 * 1024)	/* max raw I/O transfer size */

- #define	CLSIZE		1
  #define	CLSIZELOG2	0

  /* NOTE: SSIZE, SINCR and UPAGES must be multiples of CLSIZE */
  #define	SSIZE	1		/* initial stack size/NBPG */
--- 52,79 ----
  #define ALIGNBYTES	(sizeof(int) - 1)
  #define ALIGN(p)	(((u_int)(p) + ALIGNBYTES) &~ ALIGNBYTES)

  #define	PGSHIFT		12		/* LOG2(NBPG) */
+ #define	NBPG		(1 << PGSHIFT)	/* bytes/page */
+ #define	PGOFSET		(NBPG-1)	/* byte offset into page */
  #define	NPTEPG		(NBPG/(sizeof (struct pte)))

  #define	PDRSHIFT	22		/* LOG2(NBPDR) */
+ #define NBPDR		(1 << PDRSHIFT)	/* bytes/page dir */
+ #define	PDROFSET	(NBPDR-1)	/* byte offset into page dir */

  #define	KERNBASE	0xFE000000	/* start of kernel virtual */
  #define	BTOPKERNBASE	((u_long)KERNBASE >> PGSHIFT)

! #define	KERNSIZE	0x00C00000	/* size of kernel virtual */
!
  #define	DEV_BSHIFT	9		/* log2(DEV_BSIZE) */
+ #define	DEV_BSIZE	(1 << DEV_BSHIFT)
+
  #define BLKDEV_IOSIZE	2048
  #define	MAXPHYS		(64 * 1024)	/* max raw I/O transfer size */

  #define	CLSIZELOG2	0
+ #define	CLSIZE		(1 << CLSIZELOG2)

  /* NOTE: SSIZE, SINCR and UPAGES must be multiples of CLSIZE */
  #define	SSIZE	1		/* initial stack size/NBPG */
***************
*** 92,99 ****
  #ifndef	MCLSHIFT
  #define	MCLSHIFT	11		/* convert bytes to m_buf clusters */
  #endif	/* MCLSHIFT */
! #define	MCLBYTES	(1 << MCLSHIFT)	/* size of a m_buf cluster */
! #define	MCLOFSET	(MCLBYTES - 1)	/* offset within a m_buf cluster */

  #ifndef NMBCLUSTERS
  #ifdef GATEWAY
--- 95,102 ----
  #ifndef	MCLSHIFT
  #define	MCLSHIFT	11		/* convert bytes to m_buf clusters */
  #endif	/* MCLSHIFT */
! #define	MCLBYTES	(1 << MCLSHIFT)	/* size of an m_buf cluster */
! #define	MCLOFSET	(MCLBYTES - 1)	/* offset within an m_buf cluster */

  #ifndef NMBCLUSTERS
  #ifdef GATEWAY
1993-10-08 13:01:34 +00:00
Rodney W. Grimes
89ec6ec6bf Removed patch kit header. Cleaned up tabbing and removed extra blank
lines to match NetBSD.  Added $Id$.
Added MID_MACHINE from NetBSD.
Removed definition of DELAY() for non-kernel soures.
Fixed some small english errors that had been corrected in NetBSD.
File is now identical to NetBSD's, but will be changing soon for some
of my clean up work.
1993-10-08 12:49:55 +00:00
Rodney W. Grimes
f43bd59ec7 Architecture specific syscalls (i386) from NetBSD 1993-10-08 11:31:40 +00:00
Rodney W. Grimes
3331c2af28 Removed patch kit headers, and rcsid, add $Id$, relocate Terry Lamberts
copyright to match the location that it is in NetBSD.

Remove the __main() {} dummy function, it belongs in kern/init_main.c
1993-10-08 10:47:13 +00:00
Jordan K. Hubbard
570232738f Allow ^C to interrupt with some semblance of politeness to cgd. 1993-10-08 02:39:36 +00:00
Jordan K. Hubbard
1fdef8c67e More paranoid dealings with system() 1993-10-08 02:38:15 +00:00
Rodney W. Grimes
5c015679e9 Christoph Robitschko manual page fixes to correct the references to vmunix
by replacing the name with 386bsd.
1993-10-08 01:36:20 +00:00
Jordan K. Hubbard
6e27d75777 Fix problems with executing from current directory 1993-10-08 01:19:35 +00:00
Rodney W. Grimes
dd06619c32 From ljo:
machdep.o is a defined to be a target in 2 places.  This was caused by
the addition of the LOAD_ADDRESS stuff.  Removed the extranious target
of machdep.o.
1993-10-06 20:49:17 +00:00
Rodney W. Grimes
09787fbaca Added /dev/zero and /dev/io, they have been around for a while, time to
have some /dev entries.
1993-10-06 03:35:03 +00:00
Jordan K. Hubbard
bd41f6854b Latest changs for XFree86 2.0 1993-10-04 22:23:03 +00:00
Jordan K. Hubbard
0978d2b15f Latest changes for XFree86 2.0 1993-10-04 22:21:10 +00:00
J.T. Conklin
d8c21a3e8a Document the new, less restrictive, behavior of the matching operator. 1993-10-04 22:07:27 +00:00
J.T. Conklin
4a13ab7c12 Allow expressions like "expr 'ABC' : '^.*$' to work as is done in other
expr implementations.
1993-10-04 21:58:53 +00:00
Rodney W. Grimes
20c7f60367 Split the src-tarball target up into multiple targets, there is now
a tar ball for each top level src directory, plus the base tar ball
that has the very toplevel files in it.
1993-10-01 21:34:23 +00:00
Rodney W. Grimes
017d59f23a Release level changed from GAMMA to EPSILON 1993-10-01 19:22:43 +00:00
Rodney W. Grimes
40762343f9 Updated to reflect the fact the there is no longer an ne driver, told to
use ed0 as the replacement, noted new addresses
1993-10-01 04:43:56 +00:00
Rodney W. Grimes
edc274e629 Changed address freebsd-comments to freebsd-questions 1993-10-01 04:40:57 +00:00
Rodney W. Grimes
fac3d38c04 Fixed cd0 line to match the GENERIC* kernel configs 1993-10-01 04:26:21 +00:00
Rodney W. Grimes
1af37a7b59 Remove old ethernet drivers if_ec, if_ne, and if_we from config files
and from files.i386, they are no longer supported.
1993-10-01 04:20:19 +00:00
David Greenman
627d219551 * Revision 2.5 93/09/30 17:44:14 davidg
* patch from vak@zebub.msk.su (Serge V.Vakulenko) to work around
 * a hardware bug in cheap WD clone boards where the PROM checksum
 * byte is always zero
1993-10-01 00:56:43 +00:00
Rodney W. Grimes
60de6c38e0 New resting home for console.h, it is machine specific. 1993-10-01 00:00:43 +00:00
Rodney W. Grimes
380888c9fa Change #include <sys/console.h> to <machine/console.h>, file will be moved
shortly
1993-09-30 23:59:49 +00:00
Rodney W. Grimes
8479e5bce6 Added share/syscons/scrnmaps directory 1993-09-30 23:31:37 +00:00
Rodney W. Grimes
b145f751d3 This is a fix for the 32K DMA buffer region that was not accounted for,
it relocates it to be after the BIOS memory hole instead of right below
the 640K limit.
THANK YOU CHRIS!!!

From: <cgd@postgres.Berkeley.EDU>
Date: Wed, 29 Sep 93 18:49:58 -0700
basically, reserve a new 32k space right after firstaddr,
and put the buffer space there...

the diffs are below, and are in ~cgd/sys/i386/i386 (in machdep.c)
on freefall.  i obviously can't test them, so if some of you would
look the diffs over and try them out...
1993-09-30 23:16:17 +00:00
Rodney W. Grimes
ea3edf6db5 Remove we0, since it is being removed from the system 1993-09-30 20:45:37 +00:00
Rodney W. Grimes
71b9f75a78 Only configure one cd unit now since the code is fully dynamic,
add comment about this to the device cd0 line.
1993-09-30 20:44:32 +00:00
Rodney W. Grimes
73baabee9a Support for new wt driver. Removed old references to as* disk types since
they are long gone.
1993-09-30 20:18:59 +00:00
Rodney W. Grimes
982970298f >From: vak@zebub.msk.su (Serge V.Vakulenko)
Date: Thu, 30 Sep 1993 15:13:17 +0300

Description:
	Old wt driver is too incomplete and buggy.
	It does not support Archive controllers, BSD-like
	tape ioctls, multiple tape controllers, different
	tape density etc.
Fix:
	This driver is a replacement of the old one.
	It was not tested on different controllers, though.

	This is the streamer tape driver for 386bsd and FreeBSD,
	which supports Wangtek and Archive controllers.
	It was developed as a replacement of the old Wangtek
	tape driver from CMU.

In comparison with the CMU driver, this version has the following enhancements:
1) Support for Archive SC402 and SC499 tape controllers added.
2) Support for up to three tape controllers on the same machine.
3) Support for BSD-style ioctls MTIOCGET, MTIOCTOP.
   Mt command now works adequately with this driver.
4) Asynchronous REWIND and FSF operations, close() will not wait
   until they finish.  The next open() will wait for it instead.
5) Use of WTQICMD ioctl is limited to ERASE and RETENS operations.
   This prevents the user from locking the tape driver by strange
   tape operations.
6) Tape density switching added.
7) The status of the process, blocked on the tape operation,
   is displayed at the WCHAN column of the `ps' command as:

	wtread    reading data from the tape
	wtwrite   writing data to the tape
	wtrfm     reading the tape marker
	wtwfm     writing the tape marker
	wtrew     rewinding the tape
	wterase   doing WTQICMD ERASE operation
	wtretens  doing WTQICMD RETENS operation
	wtorew    doing MTIOCTOP REW/OFFL operation
	wtorfm    doing MTIOCTOP FSF operation
	wtowfm    doing MTIOCTOP WEOF operation

Block interface (writing blocks less than 2048 bytes) is not functioning
pwoperly.  Use raw interface instead.
1993-09-30 20:12:37 +00:00
David Greenman
2da38870a3 * Revision 2.4 93/09/29 21:24:30 davidg
* Added software NIC reset in NE probe to work around a problem
 * with some NE boards where the 8390 doesn't reset properly on
 * power-up. Remove initialization of IMR/ISR in the NE probe
 * because this is inherent in the reset.
1993-09-30 05:27:55 +00:00
David Greenman
e34ff1781d * Revision 2.3 93/09/29 15:10:16 davidg
* credit Charles Hannum
1993-09-29 22:15:53 +00:00
David Greenman
9699168bba * Revision 2.2 93/09/29 13:23:25 davidg
* added no multi-buffer override for 3c503
 *
 * Revision 2.1  93/09/29  12:32:12  davidg
 * changed multi-buffer count for 16bit 3c503's from 5 to 2 after
 * noticing that the transmitter becomes idle because of so many
 * packets to load.
 *
 * Revision 2.0  93/09/29  00:00:19  davidg
 * many changes, rewrites, additions, etc. Now supports the
 * NE1000, NE2000, WD8003, WD8013, 3C503, 16bit 3C503, and
 * a variety of similar clones. 16bit 3c503 now does multi
 * transmit buffers. Nearly every part of the driver has
 * changed in some way since rev 1.30.
1993-09-29 20:30:26 +00:00
Rodney W. Grimes
b1929a9f4a Add symbolic name for system page directory end, and change constant to
a calculation for the system page directory tables.
1993-09-29 02:37:41 +00:00
Rodney W. Grimes
6014d8700d Updated for new location of syscons fonts and keymap files 1993-09-29 02:25:59 +00:00
Rodney W. Grimes
d2f07716e2 >From: "Andrew A. Chernov, Black Mage" <ache@astral.msk.su>
Date: Wed, 29 Sep 1993 01:54:53 +0300

To bring this error try to make two swap partitons on one disk:
one of the partitions will be not recognized.
Fix is simple: set uninitialized val variable.
1993-09-29 01:11:19 +00:00
Jordan K. Hubbard
0e583a0138 From: "Andrew A. Chernov, Black Mage" <ache@astral.msk.su>
AltGr Lock code for zero repeat count ommited, so AltGr Lock
works only one time and never again :-)
1993-09-29 00:42:10 +00:00
Rodney W. Grimes
e730ca26a3 Convert another printf into an lprintf since this should only be output
for debugging.

Thanks Chris.
1993-09-28 21:50:59 +00:00
Jordan K. Hubbard
b5275b8103 Version number support for XFree86 1993-09-28 20:53:48 +00:00
Rodney W. Grimes
5487793b4b >From: chmr@edvz.tu-graz.ac.at (Christoph Robitschko)
Date: Tue, 28 Sep 1993 09:03:13 +0100 (MET)
The only place I found with a printf("status %x") is in /sys/i386/isa/lpt.c,
and looks much like a left-over debugging printout...

And it was... I changed it to an lprintf (which is defined if debuggin is on)
			Rod
1993-09-28 17:02:34 +00:00
Jordan K. Hubbard
fae56ff15f Change to sio for recognising the last serial port on a multiport
card correctly.

Updated syscons to 0.2e, added features for upcoming XFree86 2.0,
fixed crashbug.
1993-09-28 00:01:18 +00:00
Rodney W. Grimes
b6c78fe436 define SHMMAXPGS where it is suppose to be, you can over ride this with
a kernel config options "SHMAXPGS=xxx", default is currently 64 pages
due to limit kernel map space.
1993-09-27 00:36:57 +00:00
Rodney W. Grimes
a0ea6f1c94 Added at 0xFE100000 to config line as this kernel HAS to load high, and
it is the place people seem to look for samples.  Also since this kernel
has so so many symbols in it also added SYMTAB_SPACE=89000.
1993-09-26 23:21:12 +00:00
Rodney W. Grimes
2d717e4a25 This Makefile is for FreeBSD, not 4.3 BSD-Reno. Moved $Id$.
Added STRIP=, DBSYM=, and LOAD_ADDRESS?=
Now use LOAD_ADDRESS for linking kernel and for dbsym, added strip -x to
cut kernel size.

Added machde.o: dependency, this will be needed in the future, and for
now it does not hurt anyone.

Cleaned out conf.o: dependency, mkdep does the right things.  Same for
param.c:

This is really a Merge in of NetBSD's Makefile.i386, here is the relevant
rlog info:
----------------------------
revision 1.27
date: 1993/08/27 23:58:20;  author: brezak;  state: Exp;  lines: +2 -2
Need LOAD_ADDRESS for depend pass.
----------------------------
revision 1.25
date: 1993/07/19 16:52:16;  author: mycroft;  state: Exp;  lines: +3 -3
Add ${DEBUG} to CFLAGS and -f to dbsym.
----------------------------
revision 1.22
date: 1993/07/18 10:08:22;  author: mycroft;  state: Exp;  lines: +5 -6
Change to work with new config stuff for specifying load address.
----------------------------
revision 1.20
date: 1993/07/18 09:47:40;  author: mycroft;  state: Exp;  lines: +6 -5
Use new -T option to dbsym.
----------------------------
revision 1.17
date: 1993/07/11 08:42:22;  author: cgd;  state: Exp;  lines: +2 -2
don't ignore errors from dbsym...  it might say that, e.g. there's
not enough symbol space!
----------------------------
revision 1.14
date: 1993/06/06 23:29:03;  author: cgd;  state: Exp;  lines: +2 -2
make conf.o actually depend on conf.c...
----------------------------
revision 1.8
date: 1993/04/29 03:27:39;  author: cgd;  state: Exp;  lines: +5 -10
use ed instead of ex.  the script to use is identical, and we might
want to switch back to using ex when our ex supports -.
----------------------------
revision 1.5
date: 1993/03/24 18:48:57;  author: cgd;  state: Exp;  lines: +1 -1
now use absolute path for dbsym
----------------------------
1993-09-26 19:44:33 +00:00
Rodney W. Grimes
f69c1fd09c Import NetBSD version of dbsym (below is rlog of there version), and add
$Id$ to Makefile.

----------------------------
revision 1.8
date: 1993/08/02 17:57:02;  author: mycroft;  state: Exp;  lines: +5 -0
Add RCS identifiers, remove some completely useless RCS logs and patchkit
headers, and a few other insignificant changes.
----------------------------
revision 1.7
date: 1993/07/19 16:50:10;  author: mycroft;  state: Exp;  lines: +43 -15
Kitchen sink version of dbsym.

-f      force; don't complain if db_symtab is missing
-g      debugging; include line number and function info
-x      remove local symbols
-T addr specify load address (necessary to determine file positions)
----------------------------
revision 1.6
date: 1993/07/18 10:34:52;  author: mycroft;  state: Exp;  lines: +1 -1
Hmmm.  I suppose text_Adr really should be an int...
----------------------------
revision 1.5
date: 1993/07/18 09:44:12;  author: mycroft;  state: Exp;  lines: +12 -6
Add -T option to specify load address of kernel (like ld); default to KERNBASE
for compatibility.
----------------------------
revision 1.4
date: 1993/07/12 18:01:51;  author: brezak;  state: Exp;  lines: +19 -2
Changes for GCC2 generated symbols.
----------------------------
revision 1.3
date: 1993/07/11 08:43:34;  author: cgd;  state: Exp;  lines: +2 -2
if no symbols present, don't complain, and exit with 0 exit status.
that way we can use dbsym from kernel makefiles and actually pay attention
to its errors...
----------------------------
revision 1.2
date: 1993/06/18 06:52:03;  author: cgd;  state: Exp;  lines: +3 -1
convert magic numbers to network byte order, and attendent changes
----------------------------
revision 1.1
date: 1993/03/21 09:59:19;  author: cgd;  state: Exp;
branches:  1.1.1;
Initial revision
----------------------------
revision 1.1.1.1
date: 1993/03/21 09:59:20;  author: cgd;  state: Exp;  lines: +0 -0
initial import of 386bsd-0.1 sources
1993-09-26 16:40:41 +00:00