This is intended to be used with memory mapped IO, e.g. from
bus_space_map with no flags, or pmap_mapdev.
Use this new memory type in the map request configured by
resource_init_map_request, and in pciconf.
Reviewed by: kib
Differential Revision: https://reviews.freebsd.org/D29692
instead of manual zeroing of the debug registers file in pcb.
This centralizes the cleaning code, but the practical difference is
that PCB_DBREGS flag is cleared, saving some operations on context
switching.
Reviewed by: jhb
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D29687
Move the code from exec_setregs() to reset debug registers state on exec,
to the x86_clear_dbregs() helper
Reviewed by: jhb
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D29687
The remote protocol allows for implementations to report more specific
reasons for the break in execution back to the client [1]. This is
entirely optional, so it is only implemented for amd64, arm64, and i386
at the moment.
[1] https://sourceware.org/gdb/current/onlinedocs/gdb/Stop-Reply-Packets.html
Reviewed by: jhb
MFC after: 3 weeks
Sponsored by: NetApp, Inc.
Sponsored by: Klara, Inc.
NetApp PR: 51
Differential Revision: https://reviews.freebsd.org/D29174
Use the new kdb variants. Print more specific error messages.
Reviewed by: jhb, markj
MFC after: 3 weeks
Sponsored by: NetApp, Inc.
Sponsored by: Klara, Inc.
Differential Revision: https://reviews.freebsd.org/D29156
Add wrappers around the dbreg interface that can be consumed by MI
kernel debugger code. The dbreg functions themselves are updated to
return error codes, not just -1. dbreg_set_watchpoint() is extended to
accept access bits as an argument.
Reviewed by: jhb, kib, markj
MFC after: 3 weeks
Sponsored by: NetApp, Inc.
Sponsored by: Klara, Inc.
Differential Revision: https://reviews.freebsd.org/D29155
e4b8deb222 removed the last in-tree uses of PCPU_INC(). Its
potential benefit is also practically nonexistent. Non-x86
platforms already implement it as PCPU_ADD(..., 1), and according
to [0] there are no recent x86 processors for which the 'inc'
instruction provides a performance benefit over the equivalent
memory-operand form of the 'add' instruction. The only remaining
benefit of 'inc' is smaller instruction size, which in this case
is inconsequential given the limited number of per-CPU data consumers.
[0]: https://www.agner.org/optimize/instruction_tables.pdf
Reviewed by: kib
Differential Revision: https://reviews.freebsd.org/D29308
This is a prerequisite to using these functions outside of ddb, but also
provides some cleanup and minor refactoring. This code is almost
entirely duplicated between the two implementations, the only
significant difference being the lack of dbreg synchronization on i386.
Cleanups are:
- demote some internal functions to static
- use the constant NDBREGS instead of a '4' literal
- remove K&R definitions
- some added comments
Reviewed by: kib, jhb
Sponsored by: NetApp, Inc.
Sponsored by: Klara, Inc.
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D29153
POSIX states that new threads created via pthread_create() should
inherit the "floating point environment" from the creating thread.
Discussed with: kib
MFC after: 1 week
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D29204
Otherwise during attach newbus prints "nexus0", which is not very
useful.
The generic nexus device is already quiet, as is nexus_acpi on arm64.
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Add it to the x86 GENERIC and MINIMAL kernels
Sponsored by: Ampere Computing LLC
Submitted by: Klara Inc.
Reviewed by: rpokala
Differential Revision: https://reviews.freebsd.org/D28738
This macro returns true if a provided virtual address is contained
in the kernel's clean submap.
In CHERI kernels, the buffer cache and transient I/O map are allocated
as separate regions. Abstracting this check reduces the diff relative
to FreeBSD. It is perhaps slightly more readable as well.
Reviewed by: kib
Obtained from: CheriBSD
Sponsored by: DARPA
Differential Revision: https://reviews.freebsd.org/D28710
Allow setting the bootmethod variable from the Xen PVH entry point, in
order to be able to correctly set the underlying firmware mode when
booted as a dom0.
Move the bootmethod variable to be defined in x86/cpu_machdep.c
instead so it can be shared by both i386 and amd64.
Sponsored by: Citrix Systems R&D
Reviewed by: kib
Differential revision: https://reviews.freebsd.org/D28619
This is what amd64 calls the i386 Linux ABI in order to distinguish it
from the amd64 Linux ABI, and matches the nomenclature used for the
FreeBSD ABIs where they always have the size suffix in the name.
Reviewed by: trasz
Differential Revision: https://reviews.freebsd.org/D27647
usbhid(4) is disabled by default to avoid conflicts with existing USB HID
drivers. To enable it place following lines to /boot/loader.conf:
hw.usb.usbhid.enable=1
usbhid_load="YES"
Suggested by: jhb
Reviewed by: hselasky
Differential revision: https://reviews.freebsd.org/D28124
This is the superset of the nooptions found in the -DEBUG kernels.
Reviewed by: emaste, manu
Sponsored by: Innovate UK
Differential Revision: https://reviews.freebsd.org/D28152
In particular, using GELI on a root filesystem will only use
accelerated software crypto drivers if they are available before the
root filesystem is mounted. While these modules can be loaded from
the loader, including them in GENERIC provides a better out-of-the-box
experience for users.
Both aesni(4) and armv8crypto(4) provide accelerated implementations
of the default cipher used by GELI (AES-XTS) in addition to other
ciphers.
Reviewed by: mhorne, allanjude, markj
Differential Revision: https://reviews.freebsd.org/D28100
This prevents a situation where other thread modifies map entries
permissions between setting max_prot, then relocking, then setting prot,
confusing the operation outcome. E.g. you can get an error that is not
possible if operation is performed atomic.
Also enable setting rwx for max_prot even if map does not allow to set
effective rwx protection.
Reviewed by: brooks, markj (previous version)
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D28117
Use an interface compatible with the Linux one so that the user-space
libraries already using the Linux interface can be used without much
modifications.
This allows user-space to make use of the dm_op family of hypercalls,
which are used by device models.
Sponsored by: Citrix Systems R&D
Remove wi(4). pccard is going away, and wi only supports PC Card
devices, though it has a minor amount of glue to also support
PCI cards. However, removing the one without removing the other
is hard, so the whole driver is being removed.
Relnotes: Yes
This change implements hid_if.m methods for HID-over-USB protocol [1].
Also, this change adds USBHID_ENABLED kernel option which changes
device_probe() priority and adds/removes PnP records to prefer usbhid
over ums, ukbd, wmt and other USB HID device drivers and vice-versa.
The module is based on uhid(4) driver. It is disabled by default for
now due to conflicts with existing USB HID drivers.
[1] https://www.usb.org/sites/default/files/hid1_11.pdf
Reviewed by: hselasky
Differential revision: https://reviews.freebsd.org/D27893
This does an import of quirk stubs, debugging macros from USB code and
numerous usage constants used by dependent drivers.
Besides, this change renames some functions to get a better matching
with userland library and NetBSD/OpenBSD HID code. Namely:
- Old hid_report_size() renamed to hid_report_size_max()
- New hid_report_size() calculates size of given report rather than
maximum size of all reports.
- hid_get_data_unsigned() renamed to hid_get_udata()
- hid_put_data_unsigned() renamed to hid_put_udata()
Compat shim functions are provided in usbhid.h to make possible compile
of legacy code unmodified after this change.
Reviewed by: manu, hselasky
Differential revision: https://reviews.freebsd.org/D27887
It will be used by the upcoming HID-over-i2C implementation. Should be
no-op, except hid.ko module dependency is to be added to affected drivers.
Reviewed by: hselasky, manu
Differential revision: https://reviews.freebsd.org/D27867
The existing values correspond to x86 exception vector numbers, but the
trap numbers used in the kernel do not match these 1-to-1. Prefer the
definitions from x86/trap.h, as they are what actually get passed to
kdb_trap(). This is of little consequence, as gdb_cpu_signal() only
reports the trap reason (signal number) to the gdb client.
This is limited to the subset of trap values for which kdb_trap() is
reachable.
Reviewed by: kib
Discussed with: jhb
MFC after: 1 week
Sponsored by: NetApp, Inc.
Sponsored by: Klara, Inc.
Differential Revision: https://reviews.freebsd.org/D27645
This sysctl node can generate very verbose output, so don't trigger it
for sysctl -a or sysctl vm.pmap.
Reviewed by: markj, kib
Differential Revision: https://reviews.freebsd.org/D27504
Ability to load-balance traffic over multiple path is a must-have thing for routers.
It may be used by the servers to balance outgoing traffic over multiple default gateways.
The previous implementation, RADIX_MPATH stayed in the shadow for too long.
It was not well maintained, which lead us to a vicious circle - people were using
non-contiguous mask or firewalls to achieve similar goals. As a result, some routing
daemons implementation still don't have multipath support enabled for FreeBSD.
Turning on ROUTE_MPATH by default would fix it. It will allow to reduce networking
feature gap to other operating systems. Linux and OpenBSD enabled similar support
at least 5 years ago.
ROUTE_MPATH does not consume memory unless actually used. It enables around ~1k LOC.
It does not bring any behaviour changes for userland.
Additionally, feature is (temporarily) turned off by the net.route.multipath sysctl
defaulting to 0.
Differential Revision: https://reviews.freebsd.org/D27428
The hme (Happy Meal Ethernet) driver was the onboard NIC in most
supported sparc64 platforms. A few PCI NICs do exist, but we have seen
no evidence of use on non-sparc systems.
Reviewed by: imp, emaste, bcr
Sponsored by: DARPA
Follow-up to r353959 and r368070: do the same for other architectures.
arm32 already seems to use its own .fnstart/.fnend directives, which
appear to be ARM-specific variants of the same thing. Likewise, MIPS
uses .frame directives.
Reviewed by: arichardson
Differential Revision: https://reviews.freebsd.org/D27387
Implement vt_vbefb to support Vesa Bios Extensions (VBE) framebuffer with VT.
vt_vbefb is built based on vt_efifb and is assuming similar data for
initialization, use MODINFOMD_VBE_FB to identify the structure vbe_fb
in kernel metadata.
struct vbe_fb, is populated by boot loader, and is passed to kernel via
metadata payload.
Differential Revision: https://reviews.freebsd.org/D27373
where it originally was. The bug introduced in r366267.
o Remove options IOMMU from i386/MINIMAL as we don't have it in
i386/GENERIC.
Reported by: Harry Schmalzbauer <freebsd@omnilan.de>
Reviewed by: kib
Sponsored by: Innovate DSbD
Differential Revision: https://reviews.freebsd.org/D27399
This driver provides support for Realtek PCI SD card readers. It attaches
mmc(4) bus on card insertion and detaches it on card removal. It has been
tested with RTS5209, RTS5227, RTS5229, RTS522A, RTS525A and RTL8411B. It
should also work with RTS5249, RTL8402 and RTL8411.
PR: 204521
Submitted by: Henri Hennebert (hlh at restart dot be)
Reviewed by: imp, jkim
Differential Revision: https://reviews.freebsd.org/D26435
