Commit Graph

1923 Commits

Author SHA1 Message Date
Mark Johnston
95033af923 Add the SCTP_SUPPORT kernel option.
This is in preparation for enabling a loadable SCTP stack.  Analogous to
IPSEC/IPSEC_SUPPORT, the SCTP_SUPPORT kernel option must be configured
in order to support a loadable SCTP implementation.

Discussed with:	tuexen
MFC after:	2 weeks
Sponsored by:	The FreeBSD Foundation
2020-06-18 19:32:34 +00:00
Mark Johnston
e9ee2675cb Update vt(4) config option names to chase r303043.
PR:		246080
Submitted by:	David Marec <david@lapinbilly.eu>
MFC after:	1 week
2020-06-04 16:05:24 +00:00
John Baldwin
97e251327f Remove ubsec(4).
This driver was previously marked for deprecation in r360710.

Approved by:	csprng (cem, gordon, delphij)
Relnotes:	yes
Sponsored by:	Chelsio Communications
Differential Revision:	https://reviews.freebsd.org/D24766
2020-05-11 20:30:28 +00:00
Conrad Meyer
3fcdcab087 Disable QUEUE_MACRO_DEBUG_TRACE in LINT kernels
It changes the size of TAILQ_ENTRY, which obviously impacts ABI in a variety of
ways.  Some of these things are _Static_asserted.  For now, mask the option
from LINT.

Reported by:	crees, np, jhb
X-MFC-With:	r359829
Sponsored by:	Dell EMC Isilon
2020-04-13 20:25:01 +00:00
Conrad Meyer
37bd4ba94b Add queue(2) debug macros as build options
Add QUEUE_MACRO_DEBUG_TRACE and QUEUE_MACRO_DEBUG_TRASH as proper kernel
options.  While here, alpha-sort the debug section of sys/conf/options.

Enable QUEUE_MACRO_DEBUG_TRASH in amd64 GENERIC (but not GENERIC-NODEBUG)
kernels.  It is similar in nature and cost to other use-after-free pointer
trashing we do in GENERIC.  It is probably reasonable to enable in any arch
GENERIC kernel that defines INVARIANTS.
2020-04-12 18:04:20 +00:00
Ian Lepore
78c1387f4c Add the Cadence GEM ethernet driver to NOTES so that it gets built with
LINT kernels.  Move the config for it from files.<arch> files into the
main config (conf/files), because it works on multiple platforms now.
2020-04-02 19:06:05 +00:00
Leandro Lupori
d8c51c6f74 [aacraid] Port driver to big-endian
Port aacraid driver to big-endian (BE) hosts.

The immediate goal of this change is to make it possible to use the
aacraid driver on PowerPC64 machines that have Adaptec Series 8 SAS
controllers.

Adapters supported by this driver expect FIB contents in little-endian
(LE) byte order. All FIBs have a fixed header part as well as a data
part that depends on the command being issued to the controller.

In this way, on BE hosts, the FIB header and all FIB data structures
used in aacraid.c and aacraid_cam.c need to be converted to LE before
being sent to the adapter and converted to BE when coming from it.

The functions to convert each struct are on aacraid_endian.c.
For little-endian (LE) targets, they are macros that expand
to nothing.
In some cases, when only a few fields of a large structure are used,
the fields are converted inline, by the code using them.

PR:		237463
Reviewed by:	jhibbits
Sponsored by:	Eldorado Research Institute (eldorado.org.br)
Differential Revision:	https://reviews.freebsd.org/D23887
2020-03-05 20:04:41 +00:00
Warner Losh
95695e4634 Remove BROOKTREE_ALLOC_PAGES now that bktr is now gone. 2020-03-02 00:23:31 +00:00
Warner Losh
daba5ace03 Finish removal of bktr
Remove the old ioctl .h files
Remove copying/linking ioctl .h files in instasllworld
Remove bktr from lint
Add now-removed files with ObsoleteFiles
2020-03-01 20:37:42 +00:00
Warner Losh
58aa35d429 Remove sparc64 kernel support
Remove all sparc64 specific files
Remove all sparc64 ifdefs
Removee indireeect sparc64 ifdefs
2020-02-03 17:35:11 +00:00
Warner Losh
51691e26d0 Remove vpo.4
The Parallel Port SCSI adapter was interesting for 100MB ZIP drives, but is no
longer used or maintained. Remove it from the tree.

The Parallel Port microsequencer (microseq.9) is now mostly unused in the tree,
but remains. PPI still refrences it, but doesn't use its full functionality.

Relnotes: Yes
Reviewed by: rgrimes@, Ihor Antonov
Discussed on: arch@
Differential Revision:  https://reviews.freebsd.org/D23389
2020-02-02 04:53:27 +00:00
Ian Lepore
422d05da14 Add support for i2c bus mux hardware.
An i2c bus can be divided into segments which can be selectively connected
and disconnected from the main bus. This is usually done to enable using
multiple slave devices having the same address, by isolating the devices
onto separate bus segments, only one of which is connected to the main bus
at once.

There are several types of i2c bus muxes, which break down into two general
categories...

 - Muxes which are themselves i2c slaves. These devices respond to i2c
   commands on their upstream bus, and based on those commands, connect
   various downstream buses to the upstream. In newbus terms, they are both
   a child of an iicbus and the parent of one or more iicbus instances.
 - Muxes which are not i2c devices themselves. Such devices are part of the
   i2c bus electrically, but in newbus terms their parent is some other
   bus. The association with the upstream bus must be established by
   separate metadata (such as FDT data).

In both cases, the mux driver has one or more iicbus child instances
representing the downstream buses. The mux driver implements the iicbus_if
interface, as if it were an iichb host bridge/i2c controller driver. It
services the IO requests sent to it by forwarding them to the iicbus
instance representing the upstream bus, after electrically connecting the
upstream bus to the downstream bus that hosts the i2c slave device which
made the IO request.

The net effect is automatic mux switching which is transparent to slaves on
the downstream buses. They just do i2c IO they way they normally do, and the
bus is electrically connected for the duration of the IO and then idled when
it is complete.

The existing iicbus_if callback() method is enhanced so that the parameter
passed to it can be a struct which contains a device_t for the requesting
bus and slave devices. This change is done by adding a flag that indicates
the extra values are present, and making the flags field the first field of
a new args struct. If the flag is set, the iichb or mux driver can recast
the pointer-to-flags into a pointer-to-struct and access the extra
fields. Thus abi compatibility with older drivers is retained (but a mux
cannot exist on the bus with the older iicbus driver in use.)

A new set of core support routines exists in iicbus.c. This code will help
implement mux drivers for any type of mux hardware by supplying all the
boilerplate code that forwards IO requests upstream. It also has code for
parsing metadata and instantiating the child iicbus instances based on it.

Two new hardware mux drivers are added. The ltc430x driver supports the
LTC4305/4306 mux chips which are controlled via i2c commands. The
iic_gpiomux driver supports any mux hardware which is controlled by
manipulating the state of one or more gpio pins.  Test Plan

Tested locally using a variety of mux'd bus configurations involving both
ltc4305 and a homebrew gpio-controlled mux. Tested configurations included
cascaded muxes (unlikely in the real world, but useful to prove that 'it all
just works' in terms of the automatic switching and upstream forwarding of
IO requests).
2020-01-02 17:51:49 +00:00
Ian Lepore
6f3bd9a660 Add comments to a couple i2c device lines. 2019-12-26 02:22:38 +00:00
Scott Long
33ce28d137 Remove the trm(4) driver
Differential Revision:	https://reviews.freebsd.org/D22575
2019-11-28 02:32:17 +00:00
Alan Somers
a3851eec6e Actually hook CAM_IO_STATS up to the build
It's still disabled by default, but now it can be enabled with config(5) and
it will be build in LINT.

Reviewed by:	imp
MFC after:	1 week
Sponsored by:	Axcient
Differential Revision:	https://reviews.freebsd.org/D22383
2019-11-16 19:12:17 +00:00
Edward Tomasz Napierala
2ae3f52cee There's nothing architecture specific in "options STATS"; move it from
sys/amd64/conf/NOTES to sys/conf/NOTES.

Suggested by:	jhb@
Sponsored by:	Klara Inc, Netflix
2019-10-30 10:16:28 +00:00
Conrad Meyer
dda17b3672 Implement NetGDB(4)
NetGDB(4) is a component of a system using a panic-time network stack to
remotely debug crashed FreeBSD kernels over the network, instead of
traditional serial interfaces.

There are three pieces in the complete NetGDB system.

First, a dedicated proxy server must be running to accept connections from
both NetGDB and gdb(1), and pass bidirectional traffic between the two
protocols.

Second, the NetGDB client is activated much like ordinary 'gdb' and
similarly to 'netdump' in ddb(4) after a panic.  Like other debugnet(4)
clients (netdump(4)), the network interface on the route to the proxy server
must be online and support debugnet(4).

Finally, the remote (k)gdb(1) uses 'target remote <proxy>:<port>' (like any
other TCP remote) to connect to the proxy server.

The NetGDB v1 protocol speaks the literal GDB remote serial protocol, and
uses a 1:1 relationship between GDB packets and sequences of debugnet
packets (fragmented by MTU).  There is no encryption utilized to keep
debugging sessions private, so this is only appropriate for local
segments or trusted networks.

Submitted by:	John Reimer <john.reimer AT emc.com> (earlier version)
Discussed some with:	emaste, markj
Relnotes:	sure
Differential Revision:	https://reviews.freebsd.org/D21568
2019-10-17 21:33:01 +00:00
Conrad Meyer
7790c8c199 Split out a more generic debugnet(4) from netdump(4)
Debugnet is a simplistic and specialized panic- or debug-time reliable
datagram transport.  It can drive a single connection at a time and is
currently unidirectional (debug/panic machine transmit to remote server
only).

It is mostly a verbatim code lift from netdump(4).  Netdump(4) remains
the only consumer (until the rest of this patch series lands).

The INET-specific logic has been extracted somewhat more thoroughly than
previously in netdump(4), into debugnet_inet.c.  UDP-layer logic and up, as
much as possible as is protocol-independent, remains in debugnet.c.  The
separation is not perfect and future improvement is welcome.  Supporting
INET6 is a long-term goal.

Much of the diff is "gratuitous" renaming from 'netdump_' or 'nd_' to
'debugnet_' or 'dn_' -- sorry.  I thought keeping the netdump name on the
generic module would be more confusing than the refactoring.

The only functional change here is the mbuf allocation / tracking.  Instead
of initiating solely on netdump-configured interface(s) at dumpon(8)
configuration time, we watch for any debugnet-enabled NIC for link
activation and query it for mbuf parameters at that time.  If they exceed
the existing high-water mark allocation, we re-allocate and track the new
high-water mark.  Otherwise, we leave the pre-panic mbuf allocation alone.
In a future patch in this series, this will allow initiating netdump from
panic ddb(4) without pre-panic configuration.

No other functional change intended.

Reviewed by:	markj (earlier version)
Some discussion with:	emaste, jhb
Objection from:	marius
Differential Revision:	https://reviews.freebsd.org/D21421
2019-10-17 16:23:03 +00:00
Ruslan Bukin
446e035c30 Add dwgpio to NOTES so it gets built in LINT kernels.
Sponsored by:	DARPA, AFRL
2019-09-05 17:54:57 +00:00
John Baldwin
b2e60773c6 Add kernel-side support for in-kernel TLS.
KTLS adds support for in-kernel framing and encryption of Transport
Layer Security (1.0-1.2) data on TCP sockets.  KTLS only supports
offload of TLS for transmitted data.  Key negotation must still be
performed in userland.  Once completed, transmit session keys for a
connection are provided to the kernel via a new TCP_TXTLS_ENABLE
socket option.  All subsequent data transmitted on the socket is
placed into TLS frames and encrypted using the supplied keys.

Any data written to a KTLS-enabled socket via write(2), aio_write(2),
or sendfile(2) is assumed to be application data and is encoded in TLS
frames with an application data type.  Individual records can be sent
with a custom type (e.g. handshake messages) via sendmsg(2) with a new
control message (TLS_SET_RECORD_TYPE) specifying the record type.

At present, rekeying is not supported though the in-kernel framework
should support rekeying.

KTLS makes use of the recently added unmapped mbufs to store TLS
frames in the socket buffer.  Each TLS frame is described by a single
ext_pgs mbuf.  The ext_pgs structure contains the header of the TLS
record (and trailer for encrypted records) as well as references to
the associated TLS session.

KTLS supports two primary methods of encrypting TLS frames: software
TLS and ifnet TLS.

Software TLS marks mbufs holding socket data as not ready via
M_NOTREADY similar to sendfile(2) when TLS framing information is
added to an unmapped mbuf in ktls_frame().  ktls_enqueue() is then
called to schedule TLS frames for encryption.  In the case of
sendfile_iodone() calls ktls_enqueue() instead of pru_ready() leaving
the mbufs marked M_NOTREADY until encryption is completed.  For other
writes (vn_sendfile when pages are available, write(2), etc.), the
PRUS_NOTREADY is set when invoking pru_send() along with invoking
ktls_enqueue().

A pool of worker threads (the "KTLS" kernel process) encrypts TLS
frames queued via ktls_enqueue().  Each TLS frame is temporarily
mapped using the direct map and passed to a software encryption
backend to perform the actual encryption.

(Note: The use of PHYS_TO_DMAP could be replaced with sf_bufs if
someone wished to make this work on architectures without a direct
map.)

KTLS supports pluggable software encryption backends.  Internally,
Netflix uses proprietary pure-software backends.  This commit includes
a simple backend in a new ktls_ocf.ko module that uses the kernel's
OpenCrypto framework to provide AES-GCM encryption of TLS frames.  As
a result, software TLS is now a bit of a misnomer as it can make use
of hardware crypto accelerators.

Once software encryption has finished, the TLS frame mbufs are marked
ready via pru_ready().  At this point, the encrypted data appears as
regular payload to the TCP stack stored in unmapped mbufs.

ifnet TLS permits a NIC to offload the TLS encryption and TCP
segmentation.  In this mode, a new send tag type (IF_SND_TAG_TYPE_TLS)
is allocated on the interface a socket is routed over and associated
with a TLS session.  TLS records for a TLS session using ifnet TLS are
not marked M_NOTREADY but are passed down the stack unencrypted.  The
ip_output_send() and ip6_output_send() helper functions that apply
send tags to outbound IP packets verify that the send tag of the TLS
record matches the outbound interface.  If so, the packet is tagged
with the TLS send tag and sent to the interface.  The NIC device
driver must recognize packets with the TLS send tag and schedule them
for TLS encryption and TCP segmentation.  If the the outbound
interface does not match the interface in the TLS send tag, the packet
is dropped.  In addition, a task is scheduled to refresh the TLS send
tag for the TLS session.  If a new TLS send tag cannot be allocated,
the connection is dropped.  If a new TLS send tag is allocated,
however, subsequent packets will be tagged with the correct TLS send
tag.  (This latter case has been tested by configuring both ports of a
Chelsio T6 in a lagg and failing over from one port to another.  As
the connections migrated to the new port, new TLS send tags were
allocated for the new port and connections resumed without being
dropped.)

ifnet TLS can be enabled and disabled on supported network interfaces
via new '[-]txtls[46]' options to ifconfig(8).  ifnet TLS is supported
across both vlan devices and lagg interfaces using failover, lacp with
flowid enabled, or lacp with flowid enabled.

Applications may request the current KTLS mode of a connection via a
new TCP_TXTLS_MODE socket option.  They can also use this socket
option to toggle between software and ifnet TLS modes.

In addition, a testing tool is available in tools/tools/switch_tls.
This is modeled on tcpdrop and uses similar syntax.  However, instead
of dropping connections, -s is used to force KTLS connections to
switch to software TLS and -i is used to switch to ifnet TLS.

Various sysctls and counters are available under the kern.ipc.tls
sysctl node.  The kern.ipc.tls.enable node must be set to true to
enable KTLS (it is off by default).  The use of unmapped mbufs must
also be enabled via kern.ipc.mb_use_ext_pgs to enable KTLS.

KTLS is enabled via the KERN_TLS kernel option.

This patch is the culmination of years of work by several folks
including Scott Long and Randall Stewart for the original design and
implementation; Drew Gallatin for several optimizations including the
use of ext_pgs mbufs, the M_NOTREADY mechanism for TLS records
awaiting software encryption, and pluggable software crypto backends;
and John Baldwin for modifications to support hardware TLS offload.

Reviewed by:	gallatin, hselasky, rrs
Obtained from:	Netflix
Sponsored by:	Netflix, Chelsio Communications
Differential Revision:	https://reviews.freebsd.org/D21277
2019-08-27 00:01:56 +00:00
Conrad Meyer
eefd8f96fb geom_uzip(4), mkuzip(8): Add Zstd image mode
The Zstd format bumps the CLOOP major number to 4 to avoid incompatibility
with older systems.  Support in geom_uzip(4) is conditional on the ZSTDIO
kernel option, which is enabled in amd64 GENERIC, but not all in-tree
configurations.

mkuzip(8) was modified slightly to always initialize the nblocks + 1'th
offset in the CLOOP file format.  Previously, it was only initialized in the
case where the final compressed block happened to be unaligned w.r.t.
DEV_BSIZE.  The "Fake" last+1 block change in r298619 means that the final
compressed block's 'blen' was never correct unless the compressed uzip image
happened to be BSIZE-aligned.  This happened in about 1 out of every 512
cases.  The zlib and lzma decompressors are probably tolerant of extra trash
following the frame they were told to decode, but Zstd complains that the
input size is incorrect.

Correspondingly, geom_uzip(4) was modified slightly to avoid trashing the
nblocks + 1'th offset when it is known to be initialized to a good value.
This corrects the calculated final real cluster compressed length to match
that printed by mkuzip(8).

mkuzip(8) was refactored somewhat to reduce code duplication and increase
ease of adding other compression formats.

  * Input block size validation was pulled out of individual compression
    init routines into main().

  * Init routines now validate a user-provided compression level or select
    an algorithm-specific default, if none was provided.

  * A new interface for calculating the maximal compressed size of an
    incompressible input block was added for each driver.  The generic code
    uses it to validate against MAXPHYS as well as to allocate compression
    result buffers in the generic code.

  * Algorithm selection is now driven by a table lookup, to increase ease of
    adding other formats in the future.

mkuzip(8) gained the ability to explicitly specify a compression level with
'-C'.  The prior defaults -- 9 for zlib and 6 for lzma -- are maintained.
The new zstd default is 9, to match zlib.

Rather than select lzma or zlib with '-L' or its absense, respectively, a
new argument '-A <algorithm>' is provided to select 'zlib', 'lzma', or
'zstd'.  '-L' is considered deprecated, but will probably never be removed.

All of the new features were documented in mkuzip.8; the page was also
cleaned up slightly.

Relnotes:	yes
2019-08-13 23:32:56 +00:00
Conrad Meyer
ac8e5d02cf Remove deprecated GEOM classes
Follow-up on r322318 and r322319 and remove the deprecated modules.

Shift some now-unused kernel files into userspace utilities that incorporate
them.  Remove references to removed GEOM classes in userspace utilities.

Reviewed by:	imp (earlier version)
Sponsored by:	Dell EMC Isilon
Differential Revision:	https://reviews.freebsd.org/D21249
2019-08-13 20:06:55 +00:00
Warner Losh
c1ab04fce5 Floppy driver really only works on x86
Move the floppy driver to the x86 specific notes file.

Reviewed by: jhb, manu, jhibbits, emaste
Differential Revision: https://reviews.freebsd.org/D21208
2019-08-12 22:58:50 +00:00
Warner Losh
99e1c5ab38 Move sc out of the global file
x86 needs sc, as does sparc64. powerpc doesn't use it by default, but some old
powermac notebooks do not work with vt yet for reasons unknonw. Even so, I've
removed it from powerpc LINT. It's not in daily use there, and the intent is to
100% switch to vt now that it works for that platform to limit support burden.

All the other architectures omit some or all of the screen savers from their
lint config. Move them to the x86 NOTES files and remove the exclusions. This
reduces slightly the number of savers sparc64 compiles, but since they are in
GENERIC, the overage is adequate and if someone reaelly wants to sort them out
in sparc64 they can sweat the details and the testing.

Reviewed by: jhb (earlier version), manu (earlier version), jhibbits
Differential Revision: https://reviews.freebsd.org/D21233
2019-08-12 22:58:44 +00:00
Warner Losh
0d89c934cb Start to split out the really x86 specific NOTES from the global notes file.
Start with COMPAT_43, since it's really only relevant to x86.

Reviewed by: jhb@
Differential Revision: https://reviews.freebsd.org/D21203
2019-08-12 22:58:13 +00:00
Warner Losh
cca7237972 Add TCP_RFC7413
We should be linting this This isn't enabled on all platforms, but compiles on
them all.

Noticed by: jhb in another review
2019-08-08 15:11:37 +00:00
Ian Lepore
5177d2941a Add a driver for Texas Instruments ADS101x/ADS111x i2c ADC chips.
Instances of the device can be configured using hints or FDT data.

Interfaces to reconfigure the chip and extract voltage measurements from
it are available via sysctl(8).
2019-08-05 15:56:44 +00:00
Xin LI
0ed1d6fb00 Allow Kernel to link in both legacy libkern/zlib and new sys/contrib/zlib,
with an eventual goal to convert all legacl zlib callers to the new zlib
version:

 * Move generic zlib shims that are not specific to zlib 1.0.4 to
   sys/dev/zlib.
 * Connect new zlib (1.2.11) to the zlib kernel module, currently built
   with Z_SOLO.
 * Prefix the legacy zlib (1.0.4) with 'zlib104_' namespace.
 * Convert sys/opencrypto/cryptodeflate.c to use new zlib.
 * Remove bundled zlib 1.2.3 from ZFS and adapt it to new zlib and make
   it depend on the zlib module.
 * Fix Z_SOLO build of new zlib.

PR:		229763
Submitted by:	Yoshihiro Ota <ota j email ne jp>
Reviewed by:	markm (sys/dev/zlib/zlib_kmod.c)
Relnotes:	yes
Differential Revision:	https://reviews.freebsd.org/D19706
2019-08-01 06:35:33 +00:00
Ian Lepore
0bab2b6e6f Add pwm devices to NOTES. 2019-06-24 02:39:56 +00:00
Ian Lepore
6e36309d83 Add gpio(4) and related drivers to NOTES. 2019-06-24 02:30:05 +00:00
Ian Lepore
ac6a9e474f Add some i2c slave-device drivers that were missing from NOTES. 2019-06-23 17:39:13 +00:00
Conrad Meyer
c363b16c63 sys: Remove DEV_RANDOM device option
Remove 'device random' from kernel configurations that reference it (most).
Replace perhaps mistaken 'nodevice random' in two MIPS configs with 'options
RANDOM_LOADABLE' instead.  Document removal in UPDATING; update NOTES and
random.4.

Reviewed by:	delphij, markm (previous version)
Approved by:	secteam(delphij)
Differential Revision:	https://reviews.freebsd.org/D19918
2019-06-21 00:16:30 +00:00
Brooks Davis
7a582e5374 FCP-101: Remove xe(4)
Relnotes:	yes
FCP:		https://github.com/freebsd/fcp/blob/master/fcp-0101.md
Reviewed by:	jhb, imp
Differential Revision:	https://reviews.freebsd.org/D20230
2019-05-17 15:24:44 +00:00
Brooks Davis
02fae06a11 FCP-101: Remove wb(4)
Relnotes:	yes
FCP:		https://github.com/freebsd/fcp/blob/master/fcp-0101.md
Reviewed by:	jhb, imp
Differential Revision:	https://reviews.freebsd.org/D20230
2019-05-17 15:24:34 +00:00
Brooks Davis
e8504bf9e7 FCP-101: Remove vx(4).
Relnotes:	yes
FCP:		https://github.com/freebsd/fcp/blob/master/fcp-0101.md
Reviewed by:	jhb, imp
Differential Revision:	https://reviews.freebsd.org/D20230
2019-05-17 15:24:26 +00:00
Brooks Davis
be345ff023 FCP-101: Remove txp(4).
Relnotes:	yes
FCP:		https://github.com/freebsd/fcp/blob/master/fcp-0101.md
Reviewed by:	jhb, imp
Differential Revision:	https://reviews.freebsd.org/D20230
2019-05-17 15:24:17 +00:00
Brooks Davis
b1b1c2fe38 FCP-101: Remove tx(4).
Relnotes:	yes
FCP:		https://github.com/freebsd/fcp/blob/master/fcp-0101.md
Reviewed by:	jhb, imp
Differential Revision:	https://reviews.freebsd.org/D20230
2019-05-17 15:24:08 +00:00
Brooks Davis
7c897ca91f FCP-101: Remove tl(4).
Relnotes:	yes
FCP:		https://github.com/freebsd/fcp/blob/master/fcp-0101.md
Reviewed by:	jhb, imp
Differential Revision:	https://reviews.freebsd.org/D20230
2019-05-17 15:24:00 +00:00
Brooks Davis
90089841de FCP-101: Remove sn(4).
Relnotes:	yes
FCP:		https://github.com/freebsd/fcp/blob/master/fcp-0101.md
Reviewed by:	jhb, imp
Differential Revision:	https://reviews.freebsd.org/D20230
2019-05-17 15:23:52 +00:00
Brooks Davis
3b70dd81f5 FCP-101: Remove sf(4).
Relnotes:	yes
FCP:		https://github.com/freebsd/fcp/blob/master/fcp-0101.md
Reviewed by:	jhb, imp
Differential Revision:	https://reviews.freebsd.org/D20230
2019-05-17 15:23:43 +00:00
Brooks Davis
607790d10f FCP-101: Remove pcn(4).
Relnotes:	yes
FCP:		https://github.com/freebsd/fcp/blob/master/fcp-0101.md
Reviewed by:	jhb, imp
Differential Revision:	https://reviews.freebsd.org/D20230
2019-05-17 15:23:34 +00:00
Brooks Davis
dd262716a1 FCP-101: Remove fe(4).
Relnotes:	yes
FCP:		https://github.com/freebsd/fcp/blob/master/fcp-0101.md
Reviewed by:	jhb, imp
Differential Revision:	https://reviews.freebsd.org/D20230
2019-05-17 15:23:26 +00:00
Brooks Davis
3ee01a1385 FCP-101: Remove ex(4).
Relnotes:	yes
FCP:		https://github.com/freebsd/fcp/blob/master/fcp-0101.md
Reviewed by:	jhb, imp
Differential Revision:	https://reviews.freebsd.org/D20230
2019-05-17 15:23:18 +00:00
Brooks Davis
e153ee663a FCP-101: Remove ep(4).
Relnotes:	yes
FCP:		https://github.com/freebsd/fcp/blob/master/fcp-0101.md
Reviewed by:	jhb, imp
Differential Revision:	https://reviews.freebsd.org/D20230
2019-05-17 15:23:10 +00:00
Brooks Davis
08ac01a92c FCP-101: Remove de(4).
Relnotes:	yes
FCP:		https://github.com/freebsd/fcp/blob/master/fcp-0101.md
Reviewed by:	jhb, imp
Differential Revision:	https://reviews.freebsd.org/D20230
2019-05-17 15:22:54 +00:00
Hans Petter Selasky
c9c8bf05a1 Fix LINT linking issue.
Add missing mlxfw symbols to LINT builds.

MFC after:	3 days
Sponsored by:	Mellanox Technologies
2019-05-08 12:28:11 +00:00
Kyle Evans
251a32b5b2 tun/tap: merge and rename to tuntap
tun(4) and tap(4) share the same general management interface and have a lot
in common. Bugs exist in tap(4) that have been fixed in tun(4), and
vice-versa. Let's reduce the maintenance requirements by merging them
together and using flags to differentiate between the three interface types
(tun, tap, vmnet).

This fixes a couple of tap(4)/vmnet(4) issues right out of the gate:
- tap devices may no longer be destroyed while they're open [0]
- VIMAGE issues already addressed in tun by kp

[0] emaste had removed an easy-panic-button in r240938 due to devdrn
blocking. A naive glance over this leads me to believe that this isn't quite
complete -- destroy_devl will only block while executing d_* functions, but
doesn't block the device from being destroyed while a process has it open.
The latter is the intent of the condvar in tun, so this is "fixed" (for
certain definitions of the word -- it wasn't really broken in tap, it just
wasn't quite ideal).

ifconfig(8) also grew the ability to map an interface name to a kld, so
that `ifconfig {tun,tap}0` can continue to autoload the correct module, and
`ifconfig vmnet0 create` will now autoload the correct module. This is a
low overhead addition.

(MFC commentary)

This may get MFC'd if many bugs in tun(4)/tap(4) are discovered after this,
and how critical they are. Changes after this are likely easily MFC'd
without taking this merge, but the merge will be easier.

I have no plans to do this MFC as of now.

Reviewed by:	bcr (manpages), tuexen (testing, syzkaller/packetdrill)
Input also from:	melifaro
Relnotes:	yes
Differential Revision:	https://reviews.freebsd.org/D20044
2019-05-08 02:32:11 +00:00
Conrad Meyer
d6745408c7 Add a COMPAT_FREEBSD12 kernel option.
Use it wherever COMPAT_FREEBSD11 is currently specified, like r309749.

Reviewed by:	imp, jhb, markj
Sponsored by:	Dell EMC Isilon
Differential Revision:	https://reviews.freebsd.org/D20120
2019-05-02 18:10:23 +00:00
Mark Johnston
94851f3788 Clarify the relationship between INVARIANTS and DIAGNOSTIC a bit.
MFC after:	1 week
Sponsored by:	The FreeBSD Foundation
2019-04-22 11:31:13 +00:00
Warner Losh
f7ab01581a Move mpr/mps drivers from per-arch NOTES files into the MI notes
file. They are in more arches they they aren't. Add appropriate
nodevice directives in powerpc and arm.
2019-04-13 06:30:45 +00:00